texlive[62517] trunk: old tetex/etc.
commits+karl at tug.org
commits+karl at tug.org
Tue Mar 8 18:55:27 CET 2022
Revision: 62517
http://tug.org/svn/texlive?view=revision&revision=62517
Author: karl
Date: 2022-03-08 18:55:27 +0100 (Tue, 08 Mar 2022)
Log Message:
-----------
old tetex/etc. man pages now maintained in TL, not by cmc
Modified Paths:
--------------
trunk/Build/source/texk/makeindexk/ChangeLog
trunk/Build/source/texk/makeindexk/mkindex.1
trunk/Build/source/texk/texlive/tl_support/ChangeLog
trunk/Build/source/texk/texlive/tl_support/e2pall.1
trunk/Build/source/texk/texlive/tl_support/fmtutil.cnf.5
trunk/Build/source/texk/texlive/tl_support/fontinst.1
trunk/Build/source/texk/texlive/tl_support/kpsetool.1
trunk/Build/source/texk/texlive/tl_support/pslatex.1
trunk/Build/source/texk/texlive/tl_support/rubibtex.1
trunk/Build/source/texk/texlive/tl_support/rumakeindex.1
trunk/Build/source/texk/texlive/tl_support/texlinks.1
trunk/Build/source/texk/web2c/hitexdir/tex/hilatex.ini
trunk/Build/source/texk/web2c/hitexdir/tex/hitex.ini
trunk/Build/source/texk/web2c/man/ChangeLog
trunk/Build/source/texk/web2c/man/ofm2opl.man
trunk/Build/source/texk/web2c/man/opl2ofm.man
trunk/Build/source/texk/web2c/man/ovf2ovp.man
trunk/Build/source/texk/web2c/man/ovp2ovf.man
trunk/Build/source/texk/web2c/man/ttf2afm.man
trunk/Build/source/texk/web2c/otps/ChangeLog
trunk/Build/source/texk/web2c/otps/mkocp.man
trunk/Build/source/texk/web2c/otps/mkofm.man
trunk/Build/source/texk/web2c/otps/otp2ocp.man
trunk/Build/source/texk/web2c/otps/outocp.man
trunk/Master/texmf-dist/doc/man/man1/dvigif.man1.pdf
trunk/Master/texmf-dist/doc/man/man1/dvipng.1
trunk/Master/texmf-dist/doc/man/man1/dvipng.man1.pdf
trunk/Master/texmf-dist/doc/man/man1/dvisvgm.1
trunk/Master/texmf-dist/doc/man/man1/dvisvgm.man1.pdf
trunk/Master/texmf-dist/doc/man/man1/e2pall.1
trunk/Master/texmf-dist/doc/man/man1/e2pall.man1.pdf
trunk/Master/texmf-dist/doc/man/man1/fmtutil-sys.man1.pdf
trunk/Master/texmf-dist/doc/man/man1/fmtutil-user.man1.pdf
trunk/Master/texmf-dist/doc/man/man1/fmtutil.1
trunk/Master/texmf-dist/doc/man/man1/fmtutil.man1.pdf
trunk/Master/texmf-dist/doc/man/man1/fontinst.1
trunk/Master/texmf-dist/doc/man/man1/fontinst.man1.pdf
trunk/Master/texmf-dist/doc/man/man1/kpsepath.man1.pdf
trunk/Master/texmf-dist/doc/man/man1/kpsetool.1
trunk/Master/texmf-dist/doc/man/man1/kpsetool.man1.pdf
trunk/Master/texmf-dist/doc/man/man1/kpsexpand.man1.pdf
trunk/Master/texmf-dist/doc/man/man1/mkindex.1
trunk/Master/texmf-dist/doc/man/man1/mkindex.man1.pdf
trunk/Master/texmf-dist/doc/man/man1/mkocp.1
trunk/Master/texmf-dist/doc/man/man1/mkocp.man1.pdf
trunk/Master/texmf-dist/doc/man/man1/mkofm.1
trunk/Master/texmf-dist/doc/man/man1/mkofm.man1.pdf
trunk/Master/texmf-dist/doc/man/man1/mktexfmt.man1.pdf
trunk/Master/texmf-dist/doc/man/man1/ofm2opl.1
trunk/Master/texmf-dist/doc/man/man1/ofm2opl.man1.pdf
trunk/Master/texmf-dist/doc/man/man1/opl2ofm.1
trunk/Master/texmf-dist/doc/man/man1/opl2ofm.man1.pdf
trunk/Master/texmf-dist/doc/man/man1/otangle.man1.pdf
trunk/Master/texmf-dist/doc/man/man1/otp2ocp.1
trunk/Master/texmf-dist/doc/man/man1/otp2ocp.man1.pdf
trunk/Master/texmf-dist/doc/man/man1/outocp.1
trunk/Master/texmf-dist/doc/man/man1/outocp.man1.pdf
trunk/Master/texmf-dist/doc/man/man1/ovf2ovp.1
trunk/Master/texmf-dist/doc/man/man1/ovf2ovp.man1.pdf
trunk/Master/texmf-dist/doc/man/man1/ovp2ovf.1
trunk/Master/texmf-dist/doc/man/man1/ovp2ovf.man1.pdf
trunk/Master/texmf-dist/doc/man/man1/pslatex.1
trunk/Master/texmf-dist/doc/man/man1/pslatex.man1.pdf
trunk/Master/texmf-dist/doc/man/man1/rubibtex.1
trunk/Master/texmf-dist/doc/man/man1/rubibtex.man1.pdf
trunk/Master/texmf-dist/doc/man/man1/rumakeindex.1
trunk/Master/texmf-dist/doc/man/man1/rumakeindex.man1.pdf
trunk/Master/texmf-dist/doc/man/man1/tangle.1
trunk/Master/texmf-dist/doc/man/man1/tangle.man1.pdf
trunk/Master/texmf-dist/doc/man/man1/texlinks.1
trunk/Master/texmf-dist/doc/man/man1/texlinks.man1.pdf
trunk/Master/texmf-dist/doc/man/man1/ttf2afm.1
trunk/Master/texmf-dist/doc/man/man1/ttf2afm.man1.pdf
trunk/Master/texmf-dist/doc/man/man1/updmap-sys.man1.pdf
trunk/Master/texmf-dist/doc/man/man1/updmap-user.man1.pdf
trunk/Master/texmf-dist/doc/man/man1/updmap.1
trunk/Master/texmf-dist/doc/man/man1/updmap.man1.pdf
trunk/Master/texmf-dist/doc/man/man1/weave.1
trunk/Master/texmf-dist/doc/man/man1/weave.man1.pdf
trunk/Master/texmf-dist/doc/man/man5/fmtutil.cnf.5
trunk/Master/texmf-dist/doc/man/man5/fmtutil.cnf.man5.pdf
Modified: trunk/Build/source/texk/makeindexk/ChangeLog
===================================================================
--- trunk/Build/source/texk/makeindexk/ChangeLog 2022-03-08 13:03:59 UTC (rev 62516)
+++ trunk/Build/source/texk/makeindexk/ChangeLog 2022-03-08 17:55:27 UTC (rev 62517)
@@ -1,3 +1,9 @@
+2022-03-08 Karl Berry <karl at freefriends.org>
+
+ * mkindex.1: update contact info.
+ Report from G\"unter Essers,
+ https://tug.org/pipermail/tex-k/2022-March/003776.html
+
2021-09-19 TANAKA Takuji <ttk at t-lab.opal.ne.jp>
* mkind.h, scanid.[ch], scanst.c:
Modified: trunk/Build/source/texk/makeindexk/mkindex.1
===================================================================
--- trunk/Build/source/texk/makeindexk/mkindex.1 2022-03-08 13:03:59 UTC (rev 62516)
+++ trunk/Build/source/texk/makeindexk/mkindex.1 2022-03-08 17:55:27 UTC (rev 62517)
@@ -1,4 +1,4 @@
-.TH "mkindex" "1" "September 2000" "teTeX" "teTeX"
+.TH "mkindex" "1" "8 March 2022" "TeX Live"
.PP
.SH "NAME"
mkindex \- script to process LaTeX index and glossary files
@@ -27,16 +27,11 @@
.PP
.SH "BUGS"
.PP
-None known, but report any bugs found to <tetex at informatik\&.uni-hannover\&.de> (mailing list)\&.
+Email bug reports to <https://lists.tug.org/tex-k> (public mailing list).
.PP
.SH "AUTHOR"
.PP
-Written by Thomas Esser
-<te at informatik\&.uni-hannover\&.de>\&.
+Written by Thomas Esser.
.PP
-This manual page was written by C\&.M\&. Connelly
-<c at eskimo\&.com>, for
-the Debian GNU/Linux system\&. It may be used by other distributions
-without contacting the author\&. Any mistakes or omissions in the
-manual page are my fault; inquiries about or corrections to this
-manual page should be directed to me (and not to the primary author)\&.
+This manual page was written by C\&.M\&. Connelly for the Debian
+GNU/Linux system\&. It is now maintained as part of TeX Live.
Modified: trunk/Build/source/texk/texlive/tl_support/ChangeLog
===================================================================
--- trunk/Build/source/texk/texlive/tl_support/ChangeLog 2022-03-08 13:03:59 UTC (rev 62516)
+++ trunk/Build/source/texk/texlive/tl_support/ChangeLog 2022-03-08 17:55:27 UTC (rev 62517)
@@ -1,3 +1,17 @@
+2022-03-08 Karl Berry <karl at freefriends.org>
+
+ *
+ * e2pall.1,
+ * fmtutil.cnf.5,
+ * fontinst.1,
+ * kpsetool.1,
+ * pslatex.1,
+ * rubibtex.1,
+ * rumakeindex.1,
+ * texlinks.1: update contact info.
+ Report from G\"unter Essers,
+ https://tug.org/pipermail/tex-k/2022-March/003776.html
+
2020-05-28 Karl Berry <karl at freefriends.org>
* Makefile.am (run-texlinks): do nothing if the texlinks script
Modified: trunk/Build/source/texk/texlive/tl_support/e2pall.1
===================================================================
--- trunk/Build/source/texk/texlive/tl_support/e2pall.1 2022-03-08 13:03:59 UTC (rev 62516)
+++ trunk/Build/source/texk/texlive/tl_support/e2pall.1 2022-03-08 17:55:27 UTC (rev 62517)
@@ -1,4 +1,4 @@
-.TH "e2pall" "1" "August 2000" "teTeX" "teTeX"
+.TH "e2pall" "1" "8 March 2022" "TeX Live"
.PP
.SH "NAME"
e2pall \- convert all EPS files in a LaTeX document to PDF
@@ -20,6 +20,7 @@
.PP
.SH "BUGS"
.PP
+Email bug reports to <https://lists.tug.org/tex-k> (public mailing list).
.IP ""
Seems to be broken
.IP ""
@@ -43,13 +44,8 @@
.PP
.SH "AUTHOR"
.PP
-\fBe2pall\fP was written by Jody Klymak <jklymak at apl\&.washington\&.edu> and published in a posting to
+\fBe2pall\fP was written by Jody Klymak and published in a posting to
the <pdftex at tug\&.org> (mailing list)\&.
.PP
-This manual page was written by C\&.M\&. Connelly
-<c at eskimo\&.com>, for
-the Debian GNU/Linux system\&. It may be used by other distributions
-without contacting the author\&. Any mistakes or omissions in the
-manual page are my fault; inquiries about or corrections to this
-manual page should be directed to me (and not to the primary author)\&.
-.PP
+This manual page was written by C\&.M\&. Connelly for the Debian
+GNU/Linux system\&. It is now maintained as part of TeX Live.
Modified: trunk/Build/source/texk/texlive/tl_support/fmtutil.cnf.5
===================================================================
--- trunk/Build/source/texk/texlive/tl_support/fmtutil.cnf.5 2022-03-08 13:03:59 UTC (rev 62516)
+++ trunk/Build/source/texk/texlive/tl_support/fmtutil.cnf.5 2022-03-08 17:55:27 UTC (rev 62517)
@@ -1,4 +1,4 @@
-.TH "fmtutil\&.cnf" "5" "October 2000" "teTeX" "teTeX"
+.TH "fmtutil\&.cnf" "5" "8 March 2022" "TeX Live"
.PP
.SH "NAME"
fmtutil\&.cnf \- configuration file for fmtutil
@@ -57,21 +57,15 @@
\fBamstex\fP(1), \fBetex\fP(1), \fBfmtutil\fP(8),
\fBtex\fP(1), \fBtexconfig\fP(8), \fBtexlinks\fP(8)\&.
.PP
-Web page: <http://tug\&.org/teTeX/>
+<https://tug.org/texlive/scripts-sys-user.html>
.PP
.SH "BUGS"
.PP
-None known, but report any bugs found to <tetex at dbs\&.uni-hannover\&.de> (mailing list)\&.
+Email bug reports to <https://lists.tug.org/tex-k> (public mailing list).
.PP
.SH "AUTHOR"
.PP
-\fIfmtutil\&.cnf\fP was written by Thomas Esser
-<te at dbs\&.uni-hannover\&.de>, and is Copyright 1998,
-1999 but released into the public domain\&.
+\fBfmtutil\fP and \fIfmtutil\&.cnf\fP was originally written by Thomas Esser.
.PP
-This manual page was written by C\&.M\&. Connelly
-<c at eskimo\&.com>, for
-the Debian GNU/Linux system\&. It may be used by other distributions
-without contacting the author\&. Any mistakes or omissions in the
-manual page are my fault; inquiries about or corrections to this
-manual page should be directed to me (and not to the primary author)\&.
+This manual page was written by C\&.M\&. Connelly for the Debian
+GNU/Linux system\&. It is now maintained as part of TeX Live.
Modified: trunk/Build/source/texk/texlive/tl_support/fontinst.1
===================================================================
--- trunk/Build/source/texk/texlive/tl_support/fontinst.1 2022-03-08 13:03:59 UTC (rev 62516)
+++ trunk/Build/source/texk/texlive/tl_support/fontinst.1 2022-03-08 17:55:27 UTC (rev 62517)
@@ -1,4 +1,4 @@
-.TH "fontinst" "1" "May 2000" "teTeX" "teTeX"
+.TH "fontinst" "1" "8 March 2022" "TeX Live"
.PP
.SH "NAME"
fontinst \- utility to run TeX as fontinst
@@ -26,20 +26,15 @@
.PP
The fontinst manual, \fIfontinst\&.tex\fP\&.
.PP
-Web page: <http://tug\&.org/applications/fontinst/>
+Web page: <https://tug.org/applications/fontinst/>
.PP
.SH "BUGS"
.PP
-None known, but report any bugs found to tex-fonts at tug\&.org (mailing list)\&.
+Email bug reports to <https://lists.tug.org/fontinst> (public mailing list).
.PP
.SH "AUTHOR"
.PP
-Thomas Esser
-<te at dbs\&.uni-hannover\&.de>
+Thomas Esser
.PP
-This manual page was written by C\&.M\&. Connelly
-<c at eskimo\&.com>, for
-the Debian GNU/Linux system\&. It may be used by other distributions
-without contacting the author\&. Any mistakes or omissions in the
-manual page are my fault; inquiries about or corrections to this
-manual page should be directed to me (and not to the primary author)\&.
+This manual page was written by C\&.M\&. Connelly for the Debian
+GNU/Linux system\&. It is now maintained as part of TeX Live.
Modified: trunk/Build/source/texk/texlive/tl_support/kpsetool.1
===================================================================
--- trunk/Build/source/texk/texlive/tl_support/kpsetool.1 2022-03-08 13:03:59 UTC (rev 62516)
+++ trunk/Build/source/texk/texlive/tl_support/kpsetool.1 2022-03-08 17:55:27 UTC (rev 62517)
@@ -1,4 +1,4 @@
-.TH "kpsetool" "1" "September 2000" "teTeX" "teTeX"
+.TH "kpsetool" "1" "8 March 2022" "TeX Live"
.PP
.SH "NAME"
kpsetool \- script to make teTeX-style \fBkpsetool\fP,
@@ -90,17 +90,13 @@
.PP
.SH "BUGS"
.PP
-None known, but report any bugs found to <tetex at dbs\&.uni-hannover\&.de> (mailing list)\&.
+Email bug reports to <https://lists.tug.org/tex-k> (public mailing list).
.PP
.SH "AUTHOR"
.PP
\fBkpsetool\fP was written by Thomas Esser
-<te at dbs\&.uni-hannover\&.de> in March, 1997\&. \fBkpsetool\fP
+in March, 1997\&. \fBkpsetool\fP
is in the public domain\&.
.PP
-This manual page was written by C\&.M\&. Connelly
-<c at eskimo\&.com>, for
-the Debian GNU/Linux system\&. It may be used by other distributions
-without contacting the author\&. Any mistakes or omissions in the
-manual page are my fault; inquiries about or corrections to this
-manual page should be directed to me (and not to the primary author)\&.
+This manual page was written by C\&.M\&. Connelly for the Debian
+GNU/Linux system\&. It is now maintained as part of TeX Live.
Modified: trunk/Build/source/texk/texlive/tl_support/pslatex.1
===================================================================
--- trunk/Build/source/texk/texlive/tl_support/pslatex.1 2022-03-08 13:03:59 UTC (rev 62516)
+++ trunk/Build/source/texk/texlive/tl_support/pslatex.1 2022-03-08 17:55:27 UTC (rev 62517)
@@ -1,4 +1,4 @@
-.TH "pslatex" "1" "September 2000" "teTeX" "teTeX"
+.TH "pslatex" "1" "8 March 2022" "TeX Live"
.PP
.SH "NAME"
pslatex \- utility to typeset LaTeX files using PostScript fonts
@@ -29,16 +29,11 @@
.PP
.SH "BUGS"
.PP
-None known\&. Report any found to the author\&.
+Email bug reports to <https://lists.tug.org/tex-k> (public mailing list).
.PP
.SH "AUTHOR"
.PP
-\fBpslatex\fP was written by David Carlisle
-<david at dcarlisle\&.demon\&.co\&.uk>\&.
+\fBpslatex\fP was written by David Carlisle.
.PP
-This manual page was written by C\&.M\&. Connelly
-<c at eskimo\&.com>, for
-the Debian GNU/Linux system\&. It may be used by other distributions
-without contacting the author\&. Any mistakes or omissions in the
-manual page are my fault; inquiries about or corrections to this
-manual page should be directed to me (and not to the primary author)\&.
+This manual page was written by C\&.M\&. Connelly for the Debian
+GNU/Linux system\&. It is now maintained as part of TeX Live.
Modified: trunk/Build/source/texk/texlive/tl_support/rubibtex.1
===================================================================
--- trunk/Build/source/texk/texlive/tl_support/rubibtex.1 2022-03-08 13:03:59 UTC (rev 62516)
+++ trunk/Build/source/texk/texlive/tl_support/rubibtex.1 2022-03-08 17:55:27 UTC (rev 62517)
@@ -1,4 +1,4 @@
-.TH "rubibtex" "1" "October 2000" "teTeX" "teTeX"
+.TH "rubibtex" "1" "8 March 2022" "TeX Live"
.PP
.SH "NAME"
rubibtex \- make a bibliography for (La)TeX using Russian
@@ -32,7 +32,7 @@
.PP
.SH "BUGS"
.PP
-None known, but report any bugs found to the authors\&.
+Email bug reports to <https://lists.tug.org/tex-k> (public mailing list).
.PP
.SH "COPYRIGHT"
.PP
@@ -45,19 +45,11 @@
.PP
.SH "SEE ALSO"
.PP
-\fBbibtex\fP(1), \fBsed\fP(1),
-<ftp://ftp\&.vsu\&.ru/pub/tex/T2/README>\&.
+\fBbibtex\fP(1), \fBsed\fP(1).
.PP
.SH "AUTHOR"
.PP
-Werner Lemberg
-<wl at gnu\&.org>, Vladimir Volovich
-<TeX at vvv\&.vsu\&.ru>\&.
+Werner Lemberg, Vladimir Volovich.
.PP
-This manual page was written by C\&.M\&. Connelly
-<c at eskimo\&.com>, for
-the Debian GNU/Linux system\&. It may be used by other distributions
-without contacting the author\&. Any mistakes or omissions in the
-manual page are my fault; inquiries about or corrections to this
-manual page should be directed to me (and not to the primary author)\&.
-.PP
+This manual page was written by C\&.M\&. Connelly for the Debian
+GNU/Linux system\&. It is now maintained as part of TeX Live.
Modified: trunk/Build/source/texk/texlive/tl_support/rumakeindex.1
===================================================================
--- trunk/Build/source/texk/texlive/tl_support/rumakeindex.1 2022-03-08 13:03:59 UTC (rev 62516)
+++ trunk/Build/source/texk/texlive/tl_support/rumakeindex.1 2022-03-08 17:55:27 UTC (rev 62517)
@@ -1,4 +1,4 @@
-.TH "rumakeindex" "1" "September 2000" "teTeX" "teTeX"
+.TH "rumakeindex" "1" "8 March 2022" "TeX Live"
.PP
.SH "NAME"
rumakeindex \- process a LaTeX index using Russian Cyrillic
@@ -32,7 +32,7 @@
.PP
.SH "BUGS"
.PP
-None known, but report any bugs found to the authors\&.
+Email bug reports to <https://lists.tug.org/tex-k> (public mailing list).
.PP
.SH "COPYRIGHT"
.PP
@@ -45,19 +45,11 @@
.PP
.SH "SEE ALSO"
.PP
-\fBmakeindex\fP(1), \fBsed\fP(1), \fBtr\fP(1),
-<ftp://ftp\&.vsu\&.ru/pub/tex/T2/README>\&.
+\fBmakeindex\fP(1), \fBsed\fP(1), \fBtr\fP(1).
.PP
.SH "AUTHOR"
.PP
-Werner Lemberg
-<wl at gnu\&.org>, Vladimir Volovich
-<TeX at vvv\&.vsu\&.ru>\&.
+Werner Lemberg, Vladimir Volovich
.PP
-This manual page was written by C\&.M\&. Connelly
-<c at eskimo\&.com>, for
-the Debian GNU/Linux system\&. It may be used by other distributions
-without contacting the author\&. Any mistakes or omissions in the
-manual page are my fault; inquiries about or corrections to this
-manual page should be directed to me (and not to the primary author)\&.
-.PP
+This manual page was written by C\&.M\&. Connelly for the Debian
+GNU/Linux system\&. It is now maintained as part of TeX Live.
Modified: trunk/Build/source/texk/texlive/tl_support/texlinks.1
===================================================================
--- trunk/Build/source/texk/texlive/tl_support/texlinks.1 2022-03-08 13:03:59 UTC (rev 62516)
+++ trunk/Build/source/texk/texlive/tl_support/texlinks.1 2022-03-08 17:55:27 UTC (rev 62517)
@@ -1,4 +1,4 @@
-.TH "texlinks" "8" "November 2007" "teTeX" "teTeX"
+.TH "texlinks" "1" ""8 March 2022" "TeX Live"
.PP
.SH "NAME"
texlinks \- maintain symbolic links from format to engine
@@ -46,21 +46,16 @@
.PP
\fBfmtutil\fP(1), \fBfmtutil\&.cnf\fP(5)
.PP
-Web page: <http://tug\&.org/teTeX/>
+Web page: <https://tug.org/texlive/>
.PP
.SH "BUGS"
.PP
-None known, but report any bugs found to <tex-k at tug\&.org> (mailing list)\&.
+Email bug reports to <https://lists.tug.org/tex-k> (public mailing list).
.PP
.SH "AUTHOR"
.PP
-\fBtexlinks\fP was written by Thomas Esser
-<te at dbs\&.uni-hannover\&.de> in 1999\&.
+\fBtexlinks\fP was written by Thomas Esser in 1999\&.
\fBtexlinks\fP has been released into the public domain\&.
.PP
-This manual page was written by C\&.M\&. Connelly
-<c at eskimo\&.com>, for
-the Debian GNU/Linux system\&. It may be used by other distributions
-without contacting the author\&. Any mistakes or omissions in the
-manual page are my fault; inquiries about or corrections to this
-manual page should be directed to me (and not to the primary author)\&.
+This manual page was written by C\&.M\&. Connelly for the Debian
+GNU/Linux system\&. It is now maintained as part of TeX Live.
Modified: trunk/Build/source/texk/web2c/hitexdir/tex/hilatex.ini
===================================================================
--- trunk/Build/source/texk/web2c/hitexdir/tex/hilatex.ini 2022-03-08 13:03:59 UTC (rev 62516)
+++ trunk/Build/source/texk/web2c/hitexdir/tex/hilatex.ini 2022-03-08 17:55:27 UTC (rev 62517)
@@ -1,4 +1,3 @@
-% $Id$
% Karl Berry, 2022. Public domain.
\scrollmode
\let\dumpprimitiveforhilatex\dump % regain control after latex.ltx
Modified: trunk/Build/source/texk/web2c/hitexdir/tex/hitex.ini
===================================================================
--- trunk/Build/source/texk/web2c/hitexdir/tex/hitex.ini 2022-03-08 13:03:59 UTC (rev 62516)
+++ trunk/Build/source/texk/web2c/hitexdir/tex/hitex.ini 2022-03-08 17:55:27 UTC (rev 62517)
@@ -1,4 +1,3 @@
-% $Id$
% Karl Berry, 2022. Public domain.
%\input plain.tex
\input etex.src
Modified: trunk/Build/source/texk/web2c/man/ChangeLog
===================================================================
--- trunk/Build/source/texk/web2c/man/ChangeLog 2022-03-08 13:03:59 UTC (rev 62516)
+++ trunk/Build/source/texk/web2c/man/ChangeLog 2022-03-08 17:55:27 UTC (rev 62517)
@@ -1,3 +1,13 @@
+2022-03-08 Karl Berry <karl at freefriends.org>
+
+ * ofm2opl.man,
+ * opl2ofm.man,
+ * ovf2ovp.man,
+ * ovp2ovf.man,
+ * ttf2afm.man: update contact info.
+ Report from G\"unter Essers,
+ https://tug.org/pipermail/tex-k/2022-March/003776.html
+
2022-03-03 Andreas Scherer <https://ascherer.github.io>
* tangle.man: Clarify the creation of the pool file name.
Modified: trunk/Build/source/texk/web2c/man/ofm2opl.man
===================================================================
--- trunk/Build/source/texk/web2c/man/ofm2opl.man 2022-03-08 13:03:59 UTC (rev 62516)
+++ trunk/Build/source/texk/web2c/man/ofm2opl.man 2022-03-08 17:55:27 UTC (rev 62517)
@@ -1,4 +1,4 @@
-.TH OFM2OPL 1 "14 April 2016" "Web2C @VERSION@"
+.TH OFM2OPL 1 "8 March 2022" "Web2C @VERSION@"
.PP
.SH "NAME"
ofm2opl \- convert Omega and TeX font-metric files to property-list files
@@ -56,10 +56,12 @@
.PP
.SH "BUGS"
.PP
-Send bug reports to <http://lists.tug.org/tex-k>
-(mailing list); may also check if the same bug is present in
-\fBtftopl\fP(1)\&. General discussion of Omega (and Aleph) can take place
-on the <http://lists.tug.org/omega> mailing list.
+Email bug reports to <https://lists.tug.org/tex-k>
+(mailing list); good to check if the same bug is present in
+\fBtftopl\fP(1)\&.
+.PP
+General discussion of Omega (and Aleph) can take place
+on the <https://lists.tug.org/omega> mailing list\&.
.PP
.SH "SEE ALSO"
.PP
@@ -85,15 +87,10 @@
.RE
.PP
\fBofm2opl\fP is based on the WEB source code for \fBtftopl\fP(1),
-although nowadays it is a link to \fBomfonts\fP, implemented entirely in
-C.
+although nowadays it is a link to \fBomfonts\fP, implemented entirely in C.
.PP
-The primary authors of Omega are John Plaice and Yannis Haralambous.
+The primary authors of Omega were John Plaice and Yannis Haralambous.
Omega (and Aleph) are now maintained as part of TeX Live.
.PP
-This manual page was written by C\&.M\&. Connelly
-<cmc at debian\&.org>, for
-the Debian GNU/Linux system\&. It may be used by other distributions
-without contacting the author\&. Any mistakes or omissions in the
-manual page are my fault; inquiries about or corrections to this
-manual page should be directed to me (and not to the primary author)\&.
+This manual page was written by C\&.M\&. Connelly for the Debian
+GNU/Linux system\&. It is also now maintained as part of TeX Live.
Modified: trunk/Build/source/texk/web2c/man/opl2ofm.man
===================================================================
--- trunk/Build/source/texk/web2c/man/opl2ofm.man 2022-03-08 13:03:59 UTC (rev 62516)
+++ trunk/Build/source/texk/web2c/man/opl2ofm.man 2022-03-08 17:55:27 UTC (rev 62517)
@@ -1,4 +1,4 @@
-.TH OPL2OFM 1 "16 June 2015" "Web2C @VERSION@"
+.TH OPL2OFM 1 "8 March 2022" "Web2C @VERSION@"
.PP
.SH "NAME"
opl2ofm \- convert Omega and TeX property-list files to font-metric files
@@ -33,8 +33,9 @@
.PP
.SH "BUGS"
.PP
-None known, but report any found to <omega at ens\&.fr> (mailing list)\&. You should also
-check to see if the bug is present in \fBpltotf\fP(1)\&.
+Email bug reports to <https://lists.tug.org/tex-k>
+(mailing list); good to check if the same bug is present in
+\fBpltotf\fP(1)\&.
.PP
.SH "SEE ALSO"
.PP
@@ -41,10 +42,6 @@
\fBomega\fP(1), \fBofm2opl\fP(1), \fBpltotf\fP(1),
\fBtftopl\fP(1)\&.
.PP
-\fIDraft Manual for the Omega System\fP (\fIomega-manual\&.dvi\fP)\&.
-.PP
-Web page: <http://www\&.gutenberg\&.eu\&.org/omega/>
-.PP
.SH "AUTHOR"
.PP
According to the WEB documentation:
@@ -63,13 +60,8 @@
program \fBOPL2OFM\fP\&.
.RE
.PP
-The primary authors of Omega are John Plaice
-<plaice at cse\&.unsw\&.edu\&.au> and Yannis Haralambous
-<yannis at fluxus-virus\&.com>\&.
+The primary authors of Omega were John Plaice and Yannis Haralambous.
+Omega (and Aleph) are now maintained as part of TeX Live.
.PP
-This manual page was written by C\&.M\&. Connelly
-<cmc at debian\&.org>, for
-the Debian GNU/Linux system\&. It may be used by other distributions
-without contacting the author\&. Any mistakes or omissions in the
-manual page are my fault; inquiries about or corrections to this
-manual page should be directed to me (and not to the primary author)\&.
+This manual page was written by C\&.M\&. Connelly for the Debian
+GNU/Linux system\&. It is also now maintained as part of TeX Live.
Modified: trunk/Build/source/texk/web2c/man/ovf2ovp.man
===================================================================
--- trunk/Build/source/texk/web2c/man/ovf2ovp.man 2022-03-08 13:03:59 UTC (rev 62516)
+++ trunk/Build/source/texk/web2c/man/ovf2ovp.man 2022-03-08 17:55:27 UTC (rev 62517)
@@ -1,4 +1,4 @@
-.TH OVF2OVP 1 "14 April 2016" "Web2C @VERSION@"
+.TH OVF2OVP 1 "8 March 2022" "Web2C @VERSION@"
.PP
.SH "NAME"
ovf2ovp \- convert virtual font file and associated font metrics to property-list format
@@ -60,9 +60,11 @@
.PP
.SH "BUGS"
.PP
-Send bug reports to <http://lists.tug.org/tex-k>
-(mailing list); may also check if the same bug is present in
-\fBvftovp\fP(1)\&. General discussion of Omega (and Aleph) can take place
+Email bug reports to <https://lists.tug.org/tex-k>
+(mailing list); good to check if the same bug is present in
+\fBvftovp\fP(1)\&.
+.PP
+General discussion of Omega (and Aleph) can take place
on the <http://lists.tug.org/omega> mailing list.
.PP
.SH "SEE ALSO"
@@ -85,15 +87,10 @@
.RE
.PP
Thus, \fBovf2ovp\fP is based on the WEB source code for \fBvftovp\fP(1),
-although nowadays it is a link to \fBomfonts\fP, implemented entirely in
-C.
+although nowadays it is a link to \fBomfonts\fP, implemented entirely in C.
.PP
-The primary authors of Omega are John Plaice and Yannis Haralambous.
+The primary authors of Omega were John Plaice and Yannis Haralambous.
Omega (and Aleph) are now maintained as part of TeX Live.
.PP
-This manual page was written by C\&.M\&. Connelly
-<cmc at debian\&.org>, for
-the Debian GNU/Linux system\&. It may be used by other distributions
-without contacting the author\&. Any mistakes or omissions in the
-manual page are my fault; inquiries about or corrections to this
-manual page should be directed to me (and not to the primary author)\&.
+This manual page was written by C\&.M\&. Connelly for the Debian
+GNU/Linux system\&. It is also now maintained as part of TeX Live.
Modified: trunk/Build/source/texk/web2c/man/ovp2ovf.man
===================================================================
--- trunk/Build/source/texk/web2c/man/ovp2ovf.man 2022-03-08 13:03:59 UTC (rev 62516)
+++ trunk/Build/source/texk/web2c/man/ovp2ovf.man 2022-03-08 17:55:27 UTC (rev 62517)
@@ -1,4 +1,4 @@
-.TH OVP2OVF 1 "16 June 2015" "Web2C @VERSION@"
+.TH OVP2OVF 1 "8 March 2022" "Web2C @VERSION@"
.PP
.SH "NAME"
ovp2ovf \- convert a virtual property-list file into a virtual font file and its associated font metric file
@@ -39,8 +39,9 @@
.PP
.SH "BUGS"
.PP
-None known, but report any found to <omega at ens\&.fr> (mailing list)\&. You should also
-check to see if the bug is in \fBvptovf\fP(1)\&.
+Email bug reports to <https://lists.tug.org/tex-k>
+(mailing list); good to check if the same bug is present in
+\fBvptovf\fP(1)\&.
.PP
.SH "SEE ALSO"
.PP
@@ -48,10 +49,6 @@
\fBpltotf\fP(1), \fBtftopl\fP(1), \fBvftovp\fP(1),
\fBvptovf\fP(1)
.PP
-\fIDraft Manual for the Omega System\fP (\fIomega-manual\&.dvi\fP)\&.
-.PP
-Web page: <http://www\&.gutenberg\&.eu\&.org/omega/>
-.PP
.SH "AUTHOR"
.PP
According to the WEB documentation:
@@ -66,14 +63,8 @@
called \fBPLFONT\fP\&.
.RE
.PP
-The primary authors of Omega are John Plaice
-<plaice at cse\&.unsw\&.edu\&.au> and Yannis Haralambous
-<yannis at fluxus-virus\&.com>\&.
+The primary authors of Omega were John Plaice and Yannis Haralambous.
+Omega (and Aleph) are now maintained as part of TeX Live.
.PP
-This manual page was written by C\&.M\&. Connelly
-<cmc at debian\&.org>, for
-the Debian GNU/Linux system\&. It may be used by other distributions
-without contacting the author\&. Any mistakes or omissions in the
-manual page are my fault; inquiries about or corrections to this
-manual page should be directed to me (and not to the primary author)\&.
-.PP
+This manual page was written by C\&.M\&. Connelly for the Debian
+GNU/Linux system\&. It is also now maintained as part of TeX Live.
Modified: trunk/Build/source/texk/web2c/man/ttf2afm.man
===================================================================
--- trunk/Build/source/texk/web2c/man/ttf2afm.man 2022-03-08 13:03:59 UTC (rev 62516)
+++ trunk/Build/source/texk/web2c/man/ttf2afm.man 2022-03-08 17:55:27 UTC (rev 62517)
@@ -1,4 +1,4 @@
-.TH TTF2AFM 1 "8 March 2016" "Web2C @VERSION@"
+.TH TTF2AFM 1 "8 March 2022" "Web2C @VERSION@"
.PP
.SH "NAME"
ttf2afm \- utility to generate AFM files for TrueType fonts
@@ -58,10 +58,10 @@
.PP
.SH "SEE ALSO"
afm2tfm(1), afm2pl(1).
-FontForge (http://fontforge.sf.net).
-LCDF TypeTools (http://lcdf.org).
+FontForge (https://fontforge.org).
+LCDF TypeTools (https://lcdf.org).
A closer look at TrueType fonts and pdfTeX, Han The Thanh
-(http://tug.org/TUGboat/tb30-1/tb94thanh.pdf).
+(https://tug.org/TUGboat/tb30-1/tb94thanh.pdf).
.PP
.SH "BUGS"
.PP
Modified: trunk/Build/source/texk/web2c/otps/ChangeLog
===================================================================
--- trunk/Build/source/texk/web2c/otps/ChangeLog 2022-03-08 13:03:59 UTC (rev 62516)
+++ trunk/Build/source/texk/web2c/otps/ChangeLog 2022-03-08 17:55:27 UTC (rev 62517)
@@ -1,3 +1,12 @@
+2022-03-08 Karl Berry <karl at freefriends.org>
+
+ * mkocp.man,
+ * mkofm.man,
+ * otp2ocp.man,
+ * outocp.man: update contact info.
+ Report from G\"unter Essers,
+ https://tug.org/pipermail/tex-k/2022-March/003776.html
+
2021-08-06 Hironobu Yamashita <h.y.acetaminophen at gmail.com>
* otp-lexer.l, otp-parser.y: Avoid MSVC compiler errors
Modified: trunk/Build/source/texk/web2c/otps/mkocp.man
===================================================================
--- trunk/Build/source/texk/web2c/otps/mkocp.man 2022-03-08 13:03:59 UTC (rev 62516)
+++ trunk/Build/source/texk/web2c/otps/mkocp.man 2022-03-08 17:55:27 UTC (rev 62517)
@@ -1,4 +1,4 @@
-.TH "mkocp" "1" "April 2017" "Omega"
+.TH "mkocp" "1" "8 March 2022" "TeX Live"
.PP
.SH "NAME"
mkocp \- frontend to \fBotp2ocp\fP(1)
@@ -26,16 +26,16 @@
.PP
\fBomega\fP(1), \fBotp2ocp\fP(1)\&.
.PP
-<https://ctan\&.org/pkg/omega>
+<https://ctan.org/pkg/omega>
.PP
+.SH "BUGS"
+.PP
+Email bug reports to <https://lists.tug.org/tex-k> (public mailing list).
+.PP
.SH "AUTHOR"
.PP
\fBmkocp\fP is part of Omega\&. The primary authors of Omega are John Plaice
and Yannis Haralambous\&.
.PP
-This manual page was written by C\&.M\&. Connelly
-<cmc at debian\&.org>, for
-the Debian GNU/Linux system\&. It may be used by other distributions
-without contacting the author\&. Any mistakes or omissions in the
-manual page are my fault; inquiries about or corrections to this
-manual page should be directed to me (and not to the primary author)\&.
+This manual page was written by C\&.M\&. Connelly for the Debian
+GNU/Linux system\&. It is now maintained as part of TeX Live.
Modified: trunk/Build/source/texk/web2c/otps/mkofm.man
===================================================================
--- trunk/Build/source/texk/web2c/otps/mkofm.man 2022-03-08 13:03:59 UTC (rev 62516)
+++ trunk/Build/source/texk/web2c/otps/mkofm.man 2022-03-08 17:55:27 UTC (rev 62517)
@@ -1,4 +1,4 @@
-.TH "mkofm" "1" "April 2017" "TeX Live"
+.TH "mkofm" "1" "8 March 2022" "TeX Live"
.PP
.SH "NAME"
mkofm \- front end to \fBmktextfm\fP(1)
@@ -14,18 +14,16 @@
.SH "SEE ALSO"
.PP
\fBmktextfm\fP(1)
+<https://ctan.org/pkg/omega>
.PP
.SH "BUGS"
.PP
-None known\&.
+Email bug reports to <https://lists.tug.org/tex-k> (public mailing list).
.PP
.SH "AUTHOR"
.PP
-Author unknown\&.
+\fBmkofm\fP is part of Omega\&. The primary authors of Omega are John Plaice
+and Yannis Haralambous\&.
.PP
-This manual page was written by C\&.M\&. Connelly
-<cmc at debian\&.org>, for
-the Debian GNU/Linux system\&. It may be used by other distributions
-without contacting the author\&. Any mistakes or omissions in the
-manual page are my fault; inquiries about or corrections to this
-manual page should be directed to me (and not to the primary author)\&.
+This manual page was written by C\&.M\&. Connelly for the Debian
+GNU/Linux system\&. It is now maintained as part of TeX Live.
Modified: trunk/Build/source/texk/web2c/otps/otp2ocp.man
===================================================================
--- trunk/Build/source/texk/web2c/otps/otp2ocp.man 2022-03-08 13:03:59 UTC (rev 62516)
+++ trunk/Build/source/texk/web2c/otps/otp2ocp.man 2022-03-08 17:55:27 UTC (rev 62517)
@@ -1,4 +1,4 @@
-.TH "otp2ocp" "1" "April 2017" "TeX Live"
+.TH "otp2ocp" "1" "8 March 2022" "TeX Live"
.PP
.SH "NAME"
otp2ocp \- convert Omega Translation Process files to Omega
@@ -21,7 +21,7 @@
.PP
\fBmkocp\fP(1), \fBomega\fP(1)\&.
.PP
-<https://ctan\&.org/pkg/omega>
+<https://ctan.org/pkg/omega>
.PP
.SH "AUTHOR"
.PP
@@ -28,9 +28,5 @@
\fBmkocp\fP is part of Omega\&. The primary authors of Omega are John Plaice
and Yannis Haralambous\&.
.PP
-This manual page was written by C\&.M\&. Connelly
-<cmc at debian\&.org>, for
-the Debian GNU/Linux system\&. It may be used by other distributions
-without contacting the author\&. Any mistakes or omissions in the
-manual page are my fault; inquiries about or corrections to this
-manual page should be directed to me (and not to the primary author)\&.
+This manual page was written by C\&.M\&. Connelly for the Debian
+GNU/Linux system\&. It is now maintained as part of TeX Live.
Modified: trunk/Build/source/texk/web2c/otps/outocp.man
===================================================================
--- trunk/Build/source/texk/web2c/otps/outocp.man 2022-03-08 13:03:59 UTC (rev 62516)
+++ trunk/Build/source/texk/web2c/otps/outocp.man 2022-03-08 17:55:27 UTC (rev 62517)
@@ -1,4 +1,4 @@
-.TH "outocp" "1" "April 2017" "TeX Live"
+.TH "outocp" "1" "8 March 2022" "TeX Live"
.PP
.SH "NAME"
outocp \- debug an OCP file
@@ -18,22 +18,17 @@
.PP
.SH "BUGS"
.PP
-None known, but report any found to <omega at ens\&.fr> (mailing list)\&.
+Email bug reports to <https://lists.tug.org/tex-k> (public mailing list).
.PP
.SH "SEE ALSO"
.PP
\fBocp2otp\fP(1), \fBotp2ocp\fP(1), \fBomega\fP(1)\&.
+<https://ctan.org/pkg/omega>
.PP
-<https://ctan\&.org/pkg/omega>
-.PP
.SH "AUTHOR"
.PP
\fBmkocp\fP is part of Omega\&. The primary authors of Omega are John Plaice
and Yannis Haralambous\&.
.PP
-This manual page was written by C\&.M\&. Connelly
-<cmc at debian\&.org>, for
-the Debian GNU/Linux system\&. It may be used by other distributions
-without contacting the author\&. Any mistakes or omissions in the
-manual page are my fault; inquiries about or corrections to this
-manual page should be directed to me (and not to the primary author)\&.
+This manual page was written by C\&.M\&. Connelly for the Debian
+GNU/Linux system\&. It is now maintained as part of TeX Live.
Modified: trunk/Master/texmf-dist/doc/man/man1/dvigif.man1.pdf
===================================================================
(Binary files differ)
Modified: trunk/Master/texmf-dist/doc/man/man1/dvipng.1
===================================================================
--- trunk/Master/texmf-dist/doc/man/man1/dvipng.1 2022-03-08 13:03:59 UTC (rev 62516)
+++ trunk/Master/texmf-dist/doc/man/man1/dvipng.1 2022-03-08 17:55:27 UTC (rev 62517)
@@ -1,4 +1,4 @@
-.\" Automatically generated by Pod::Man 2.27 (Pod::Simple 3.28)
+.\" Automatically generated by Pod::Man 4.09 (Pod::Simple 3.35)
.\"
.\" Standard preamble:
.\" ========================================================================
@@ -46,7 +46,7 @@
.ie \n(.g .ds Aq \(aq
.el .ds Aq '
.\"
-.\" If the F register is turned on, we'll generate index entries on stderr for
+.\" If the F register is >0, we'll generate index entries on stderr for
.\" titles (.TH), headers (.SH), subsections (.SS), items (.Ip), and index
.\" entries marked with X<> in POD. Of course, you'll have to process the
.\" output yourself in some meaningful fashion.
@@ -54,20 +54,16 @@
.\" Avoid warning from groff about undefined register 'F'.
.de IX
..
-.nr rF 0
-.if \n(.g .if rF .nr rF 1
-.if (\n(rF:(\n(.g==0)) \{
-. if \nF \{
-. de IX
-. tm Index:\\$1\t\\n%\t"\\$2"
+.if !\nF .nr F 0
+.if \nF>0 \{\
+. de IX
+. tm Index:\\$1\t\\n%\t"\\$2"
..
-. if !\nF==2 \{
-. nr % 0
-. nr F 2
-. \}
+. if !\nF==2 \{\
+. nr % 0
+. nr F 2
. \}
.\}
-.rr rF
.\"
.\" Accent mark definitions (@(#)ms.acc 1.5 88/02/08 SMI; from UCB 4.2).
.\" Fear. Run. Save yourself. No user-serviceable parts.
@@ -133,7 +129,7 @@
.\" ========================================================================
.\"
.IX Title "DVIPNG 1"
-.TH DVIPNG 1 "2022-02-27" "dvipng (TeX Live) 1.17" "User commands"
+.TH DVIPNG 1 "2020-01-05" "dvipng 1.17" "User commands"
.\" For nroff, turn off justification. Always turn off hyphenation; it makes
.\" way too many mistakes in technical documents.
.if n .ad l
@@ -154,24 +150,24 @@
\&\fBdvigif\fR binary or with the \fB\-\-gif\fR option.
.PP
The benefits of \fBdvipng\fR/\fBdvigif\fR include
-.IP "\(bu" 4
+.IP "*" 4
Speed. It is a very fast bitmap-rendering code for \s-1DVI\s0 files, which
makes it suitable for generating large amounts of images on-the-fly,
as needed in preview-latex, WeBWorK and others.
-.IP "\(bu" 4
+.IP "*" 4
It does not read the postamble, so it can be started before TeX
finishes. There is a \fB\-\-follow\fR switch that makes dvipng wait at
end-of-file for further output, unless it finds the \s-1POST\s0 marker that
indicates the end of the \s-1DVI.\s0
-.IP "\(bu" 4
+.IP "*" 4
Interactive query of options. dvipng can read options interactively
through stdin, and all options are usable. It is even possible to change
the input file through this interface.
-.IP "\(bu" 4
+.IP "*" 4
Supports \s-1PK, VF,\s0 PostScript Type1, and TrueType fonts, subfonts (i.e.,
as used in CJK-LaTeX), color specials, and inclusion of PostScript,
\&\s-1PNG, JPEG\s0 or \s-1GIF\s0 images.
-.IP "\(bu" 4
+.IP "*" 4
and more...
.SH "OPTIONS"
.IX Header "OPTIONS"
Modified: trunk/Master/texmf-dist/doc/man/man1/dvipng.man1.pdf
===================================================================
(Binary files differ)
Modified: trunk/Master/texmf-dist/doc/man/man1/dvisvgm.1
===================================================================
--- trunk/Master/texmf-dist/doc/man/man1/dvisvgm.1 2022-03-08 13:03:59 UTC (rev 62516)
+++ trunk/Master/texmf-dist/doc/man/man1/dvisvgm.1 2022-03-08 17:55:27 UTC (rev 62517)
@@ -2,12 +2,12 @@
.\" Title: dvisvgm
.\" Author: Martin Gieseking <martin.gieseking at uos.de>
.\" Generator: DocBook XSL Stylesheets vsnapshot <http://docbook.sf.net/>
-.\" Date: 2022-01-18
+.\" Date: 2022-02-26
.\" Manual: dvisvgm Manual
-.\" Source: dvisvgm 2.13.2
+.\" Source: dvisvgm 2.13.3
.\" Language: English
.\"
-.TH "DVISVGM" "1" "2022\-01\-18" "dvisvgm 2\&.13\&.2" "dvisvgm Manual"
+.TH "DVISVGM" "1" "2022\-02\-26" "dvisvgm 2\&.13\&.3" "dvisvgm Manual"
.\" -----------------------------------------------------------------
.\" * Define some portability stuff
.\" -----------------------------------------------------------------
@@ -628,8 +628,17 @@
\fBid\fR, prevents this\&.
.RE
.PP
-\fBremove\-clippath\fR
+\fBreassign\-clippaths\fR
.RS 4
+Collects all
+\fBclipPath\fR
+elements that differ only by their IDs\&. Afterwards, the duplicates are removed so that only one remains\&. All
+\fBclip\-path\fR
+attributes referencing one of the duplicates are updated accordingly\&.
+.RE
+.PP
+\fBremove\-clippaths\fR
+.RS 4
Removes all redundant
\fIclipPath\fR
elements\&. This optimization was already present in former versions of dvisvgm and was always applied by default\&. This behavior is retained, i\&.e\&. dvisvgm executes this module even if option
Modified: trunk/Master/texmf-dist/doc/man/man1/dvisvgm.man1.pdf
===================================================================
(Binary files differ)
Modified: trunk/Master/texmf-dist/doc/man/man1/e2pall.1
===================================================================
--- trunk/Master/texmf-dist/doc/man/man1/e2pall.1 2022-03-08 13:03:59 UTC (rev 62516)
+++ trunk/Master/texmf-dist/doc/man/man1/e2pall.1 2022-03-08 17:55:27 UTC (rev 62517)
@@ -1,4 +1,4 @@
-.TH "e2pall" "1" "August 2000" "teTeX" "teTeX"
+.TH "e2pall" "1" "8 March 2022" "TeX Live"
.PP
.SH "NAME"
e2pall \- convert all EPS files in a LaTeX document to PDF
@@ -20,6 +20,7 @@
.PP
.SH "BUGS"
.PP
+Email bug reports to <https://lists.tug.org/tex-k> (public mailing list).
.IP ""
Seems to be broken
.IP ""
@@ -43,13 +44,8 @@
.PP
.SH "AUTHOR"
.PP
-\fBe2pall\fP was written by Jody Klymak <jklymak at apl\&.washington\&.edu> and published in a posting to
+\fBe2pall\fP was written by Jody Klymak and published in a posting to
the <pdftex at tug\&.org> (mailing list)\&.
.PP
-This manual page was written by C\&.M\&. Connelly
-<c at eskimo\&.com>, for
-the Debian GNU/Linux system\&. It may be used by other distributions
-without contacting the author\&. Any mistakes or omissions in the
-manual page are my fault; inquiries about or corrections to this
-manual page should be directed to me (and not to the primary author)\&.
-.PP
+This manual page was written by C\&.M\&. Connelly for the Debian
+GNU/Linux system\&. It is now maintained as part of TeX Live.
Modified: trunk/Master/texmf-dist/doc/man/man1/e2pall.man1.pdf
===================================================================
(Binary files differ)
Modified: trunk/Master/texmf-dist/doc/man/man1/fmtutil-sys.man1.pdf
===================================================================
(Binary files differ)
Modified: trunk/Master/texmf-dist/doc/man/man1/fmtutil-user.man1.pdf
===================================================================
(Binary files differ)
Modified: trunk/Master/texmf-dist/doc/man/man1/fmtutil.1
===================================================================
--- trunk/Master/texmf-dist/doc/man/man1/fmtutil.1 2022-03-08 13:03:59 UTC (rev 62516)
+++ trunk/Master/texmf-dist/doc/man/man1/fmtutil.1 2022-03-08 17:55:27 UTC (rev 62517)
@@ -1,61 +1,43 @@
-.\" DO NOT MODIFY THIS FILE! It was generated by help2man 1.49.1.
-.TH FMTUTIL "1" "March 2022" "TeX Live" "User Commands"
+.\" DO NOT MODIFY THIS FILE! It was generated by help2man 1.46.5.
+.TH FMTUTIL "1" "April 2015" "TeX Live" "User Commands"
.SH NAME
-fmtutil \- manage TeX formats and Metafont bases, per-user
+fmtutil \- manage TeX formats, Metafont bases and Metapost mems, per-user
.br
-fmtutil-sys \- manage TeX formats and Metafont bases, system-wide
+fmtutil-sys \- manage TeX formats, Metafont bases and Metapost mems, system-wide
.br
-mktexfmt \- create a TeX format or Metafont base
+mktexfmt \- create a TeX format, Metafont base, or Metapost mem
.SH SYNOPSIS
.B fmtutil
-[\fI\,-user|-sys\/\fR] [\fI\,OPTION\/\fR] ... [\fI\,COMMAND\/\fR]
+[\fI\,OPTION\/\fR] ... [\fI\,COMMAND\/\fR]
.br
.B fmtutil-sys
[\fI\,OPTION\/\fR] ... [\fI\,COMMAND\/\fR]
.br
-.B fmtutil-user
-[\fI\,OPTION\/\fR] ... [\fI\,COMMAND\/\fR]
-.br
.B mktexfmt
-\fI\,FORMAT.fmt|BASE.base|FMTNAME\/\fR
+\fI\,FORMAT.fmt|BASE.base|MEM.mem|FMTNAME.EXT\/\fR
.SH DESCRIPTION
-fmtutil version r60154 (2021\-08\-03 23:55:56 +0200)
+fmtutil version svn36788 (2015\-04\-13 00:53:26 +0900)
.PP
-Rebuild and manage TeX fmts and Metafont bases, collectively called
-"formats" here. (MetaPost no longer uses the past\-equivalent "mems".)
+Rebuild and manage TeX formats, Metafont bases and MetaPost mems.
.PP
-If not operating in mktexfmt mode, exactly one command must be given,
-filename suffixes should generally not be specified, no non\-option
-arguments are allowed, and multiple formats can be generated.
-.PP
If the command name ends in mktexfmt, only one format can be created.
The only options supported are \fB\-\-help\fR and \fB\-\-version\fR, and the command
-line must be either a format name, with extension, or a plain name that
-is passed as the argument to \fB\-\-byfmt\fR (see below). The full name of the
-generated file (if any) is written to stdout, and nothing else. The
-system directories are used if they are writable, else the user directories.
+line must consist of either a format name, with its extension, or a
+plain name that is passed as the argument to \fB\-\-byfmt\fR (see below). The
+full name of the generated file (if any) is written to stdout, and
+nothing else.
.PP
-By default, the return status is zero if all formats requested are
-successfully built, else nonzero.
+If not operating in mktexfmt mode, the command line can be more general,
+and multiple formats can be generated, as follows.
.SH OPTIONS
.TP
-\fB\-\-sys\fR
-use TEXMFSYS{VAR,CONFIG}
-.TP
-\fB\-\-user\fR
-use TEXMF{VAR,CONFIG}
-.TP
\fB\-\-cnffile\fR FILE
read FILE instead of fmtutil.cnf
(can be given multiple times, in which case
all the files are used)
+.HP
+\fB\-\-fmtdir\fR DIRECTORY
.TP
-\fB\-\-dry\-run\fR, \fB\-n\fR
-don't actually build formts
-.TP
-\fB\-\-fmtdir\fR DIR
-write formats under DIR instead of TEXMF[SYS]VAR
-.TP
\fB\-\-no\-engine\-subdir\fR
don't use engine\-specific subdir of the fmtdir
.TP
@@ -63,39 +45,21 @@
exit successfully if no format is selected
.TP
\fB\-\-no\-error\-if\-no\-engine\fR=\fI\,ENGINE1\/\fR,ENGINE2,...
-exit successfully even if a required ENGINE
+exit successfully even if the required engine
.IP
is missing, if it is included in the list.
.TP
-\fB\-\-no\-strict\fR
-exit successfully even if a format fails to build
-.TP
-\fB\-\-nohash\fR
-don't update ls\-R files
-.TP
-\fB\-\-recorder\fR
-pass the \fB\-recorder\fR option and save .fls files
-.TP
-\fB\-\-refresh\fR
-recreate only existing format files
-.TP
-\fB\-\-status\-file\fR FILE
-append status information about built formats to FILE
-.TP
\fB\-\-quiet\fR
be silent
.TP
-\fB\-\-catcfg\fR
-(does nothing, exists for compatibility)
+\fB\-\-test\fR
+(not implemented, just for compatibility)
.TP
\fB\-\-dolinks\fR
-(does nothing, exists for compatibility)
+(not implemented, just for compatibility)
.TP
\fB\-\-force\fR
-(does nothing, exists for compatibility)
-.TP
-\fB\-\-test\fR
-(does nothing, exists for compatibility)
+(not implemented, just for compatibility)
.SS "Commands:"
.TP
\fB\-\-all\fR
@@ -104,31 +68,34 @@
\fB\-\-missing\fR
create all missing format files
.TP
-\fB\-\-byengine\fR ENGINE
-(re)create formats built with ENGINE
+\fB\-\-refresh\fR
+recreate only existing format files
.TP
-\fB\-\-byfmt\fR FORMAT
-(re)create format FORMAT
+\fB\-\-byengine\fR ENGINENAME
+(re)create formats using ENGINENAME
.TP
+\fB\-\-byfmt\fR FORMATNAME
+(re)create format for FORMATNAME
+.TP
\fB\-\-byhyphen\fR HYPHENFILE
(re)create formats that depend on HYPHENFILE
.TP
-\fB\-\-enablefmt\fR
-FORMAT[/ENGINE] enable FORMAT, as built with ENGINE
+\fB\-\-enablefmt\fR FORMATNAME
+enable formatname in config file
.TP
-\fB\-\-disablefmt\fR FORMAT[/ENGINE]
-disable FORMAT, as built with ENGINE
-If multiple formats have the same name and
-.IP
-different engines, \fI\,/ENGINE\/\fP specifier is required.
+\fB\-\-disablefmt\fR FORMATNAME
+disable formatname in config file
.TP
\fB\-\-listcfg\fR
list (enabled and disabled) configurations,
filtered to available formats
.TP
-\fB\-\-showhyphen\fR FORMAT
-print name of hyphen file for FORMAT
+\fB\-\-catcfg\fR
+output the content of the config file
.TP
+\fB\-\-showhyphen\fR FORMATNAME
+print name of hyphenfile for format FORMATNAME
+.TP
\fB\-\-version\fR
show version information and exit
.TP
@@ -140,10 +107,8 @@
.IP
If \fB\-\-cnffile\fR is specified on the command line (possibly multiple
times), its value(s) are used. Otherwise, fmtutil reads all the
-fmtutil.cnf files found by running "kpsewhich \fB\-all\fR fmtutil.cnf", in the
-order returned by kpsewhich. Files specified via \fB\-\-cnffile\fR are
-first tried to be loaded directly, and if not found and the file names
-don't contain directory parts, are searched via kpsewhich.
+fmtutil.cnf files found by running `kpsewhich \fB\-all\fR fmtutil.cnf', in the
+order returned by kpsewhich.
.IP
In any case, if multiple fmtutil.cnf files are found, all the format
definitions found in all the fmtutil.cnf files are merged.
@@ -159,7 +124,7 @@
TEXMFLOCAL \fI\,$TEXLIVE/texmf\-local/web2c/fmtutil.cnf\/\fP
TEXMFDIST \fI\,$TEXLIVE/YYYY/texmf\-dist/web2c/fmtutil.cnf\/\fP
.IP
-For fmtutil\-user:
+For fmtutil:
TEXMFCONFIG $HOME/.texliveYYYY/texmf\-config/web2c/fmtutil.cnf
TEXMFVAR $HOME/.texliveYYYY/texmf\-var/web2c/fmtutil.cnf
TEXMFHOME \fI\,$HOME/texmf/web2c/fmtutil.cnf\/\fP
@@ -171,35 +136,20 @@
(where YYYY is the TeX Live release version).
.fi
.IP
-According to the actions, fmtutil might update one of the existing cnf
-files or create a new fmtutil.cnf, as described below.
+According to the actions, fmtutil might write to one of the given files
+or create a new fmtutil.cnf, described further below.
.PP
-Where format files are written:
+Where changes are saved:
.IP
-By default, format files are (re)written in \fI\,$TEXMFSYSVAR/ENGINE\/\fP by
-fmtutil\-sys, and \fI\,$TEXMFVAR/ENGINE\/\fP by fmtutil\-user, where \fI\,/ENGINE\/\fP is
-a subdirectory named for the engine used, such as "pdftex".
-.IP
-For mktexfmt, TEXMFSYSVAR is used if it is writable, else TEXMFVAR.
-.IP
-If the \fB\-\-fmtdir\fR=\fI\,DIR\/\fR option is specified, DIR is used instead of
-TEXMF[SYS]VAR, but the \fI\,/ENGINE\/\fP subdir is still used by default.
-.IP
-In all cases, if the \fB\-\-no\-engine\-subdir\fR option is specified, the
-\fI\,/ENGINE\/\fP subdir is omitted.
-.PP
-Where configuration changes are saved:
-.IP
If config files are given on the command line, then the first one
given will be used to save any changes from \fB\-\-enable\fR or \fB\-\-disable\fR.
-.IP
If the config files are taken from kpsewhich output, then the
-algorithm is more complicated:
+algorithm is more complex:
.IP
-1) If \fI\,$TEXMFCONFIG/web2c/fmtutil.cnf\/\fP or
-\fI\,$TEXMFHOME/web2c/fmtutil.cnf\/\fP appears in the list of used files,
-then the one listed first by kpsewhich \fB\-\-all\fR (equivalently, the one
-returned by "kpsewhich fmtutil.cnf"), is used.
+1) If \fI\,$TEXMFCONFIG/web2c/fmtutil.cnf\/\fP or \fI\,$TEXMFHOME/web2c/fmtutil.cnf\/\fP
+appears in the list of used files, then the one listed first by
+kpsewhich \fB\-\-all\fR (equivalently, the one returned by kpsewhich
+fmtutil.cnf), is used.
.IP
2) If neither of the above two are present and changes are made, a
new config file is created in \fI\,$TEXMFCONFIG/web2c/fmtutil.cnf\/\fP.
@@ -206,8 +156,8 @@
.IP
In general, the idea is that if a given config file is not writable, a
higher\-level one can be used. That way, the distribution's settings
-can be overridden system\-wide using TEXMFLOCAL, and system settings
-can be overridden again in a particular user's TEXMFHOME or TEXMFCONF.
+can be overridden for system\-wide using TEXMFLOCAL, and then system
+settings can be overridden again for a particular using using TEXMFHOME.
.PP
Resolving multiple definitions of a format:
.IP
@@ -217,43 +167,30 @@
Disabling formats:
.IP
fmtutil.cnf files with higher priority (listed earlier) can disable
-formats in lower priority (listed later) fmtutil.cnf files by
-writing a line like this in the higher\-priority fmtutil.cnf file:
+formats mentioned in lower priority (listed later) fmtutil.cnf files by
+writing, e.g.,
.IP
#! <fmtname> <enginename> <hyphen> <args>
.IP
-The #! must be at the beginning of the line, with at least one space
-or tab afterward, and there must be whitespace between each word on
-the list.
+in the higher\-priority fmtutil.cnf file.
.IP
-For example, you can disable the luajitlatex format by creating
-the file \fI\,$TEXMFCONFIG/web2c/fmtutil.cnf\/\fP with the line
+As an example, suppose you have want to disable the luajitlatex format.
+You can create the file \fI\,$TEXMFCONFIG/web2c/fmtutil.cnf\/\fP with the content
.IP
#! luajitlatex luajittex language.dat,language.dat.lua lualatex.ini
.IP
-(As it happens, the luajittex\-related formats are precisely why the
-\fB\-\-no\-error\-if\-no\-engine\fR option exists, since luajittex cannot be
-compiled on all platforms. So this is not needed.)
+and call fmtutil.
.PP
-fmtutil\-user (fmtutil \fB\-user\fR) vs. fmtutil\-sys (fmtutil \fB\-sys\fR):
+fmtutil vs. fmtutil\-sys (fmtutil \fB\-\-sys\fR):
.IP
-When fmtutil\-sys is run or the command line option \fB\-sys\fR is used,
+When fmtutil\-sys is run or the command line option \fB\-\-sys\fR is used,
TEXMFSYSCONFIG and TEXMFSYSVAR are used instead of TEXMFCONFIG and
-TEXMFVAR, respectively. This is the primary difference between
-fmtutil\-sys and fmtutil\-user.
+TEXMFVAR, respectively. This is the primary difference between
+fmtutil\-sys and fmtutil.
.IP
-See https://tug.org/texlive/scripts\-sys\-user.html for details.
-.IP
Other locations may be used if you give them on the command line, or
these trees don't exist, or you are not using the original TeX Live.
-.PP
-Supporting development binaries:
-.IP
-If an engine name ends with "\-dev", formats are created in
-the respective directory with the \fB\-dev\fR stripped. This allows for
-easily running development binaries in parallel with the released
-binaries.
.SH "REPORTING BUGS"
-Report bugs to: tex\-live at tug.org
+Report bugs to: tex\-k at tug.org
.br
-TeX Live home page: <https://tug.org/texlive/>
+TeX Live home page: <http://tug.org/texlive/>
Modified: trunk/Master/texmf-dist/doc/man/man1/fmtutil.man1.pdf
===================================================================
(Binary files differ)
Modified: trunk/Master/texmf-dist/doc/man/man1/fontinst.1
===================================================================
--- trunk/Master/texmf-dist/doc/man/man1/fontinst.1 2022-03-08 13:03:59 UTC (rev 62516)
+++ trunk/Master/texmf-dist/doc/man/man1/fontinst.1 2022-03-08 17:55:27 UTC (rev 62517)
@@ -1,4 +1,4 @@
-.TH "fontinst" "1" "May 2000" "teTeX" "teTeX"
+.TH "fontinst" "1" "8 March 2022" "TeX Live"
.PP
.SH "NAME"
fontinst \- utility to run TeX as fontinst
@@ -26,20 +26,15 @@
.PP
The fontinst manual, \fIfontinst\&.tex\fP\&.
.PP
-Web page: <http://tug\&.org/applications/fontinst/>
+Web page: <https://tug.org/applications/fontinst/>
.PP
.SH "BUGS"
.PP
-None known, but report any bugs found to tex-fonts at tug\&.org (mailing list)\&.
+Email bug reports to <https://lists.tug.org/fontinst> (public mailing list).
.PP
.SH "AUTHOR"
.PP
-Thomas Esser
-<te at dbs\&.uni-hannover\&.de>
+Thomas Esser
.PP
-This manual page was written by C\&.M\&. Connelly
-<c at eskimo\&.com>, for
-the Debian GNU/Linux system\&. It may be used by other distributions
-without contacting the author\&. Any mistakes or omissions in the
-manual page are my fault; inquiries about or corrections to this
-manual page should be directed to me (and not to the primary author)\&.
+This manual page was written by C\&.M\&. Connelly for the Debian
+GNU/Linux system\&. It is now maintained as part of TeX Live.
Modified: trunk/Master/texmf-dist/doc/man/man1/fontinst.man1.pdf
===================================================================
(Binary files differ)
Modified: trunk/Master/texmf-dist/doc/man/man1/kpsepath.man1.pdf
===================================================================
(Binary files differ)
Modified: trunk/Master/texmf-dist/doc/man/man1/kpsetool.1
===================================================================
--- trunk/Master/texmf-dist/doc/man/man1/kpsetool.1 2022-03-08 13:03:59 UTC (rev 62516)
+++ trunk/Master/texmf-dist/doc/man/man1/kpsetool.1 2022-03-08 17:55:27 UTC (rev 62517)
@@ -1,4 +1,4 @@
-.TH "kpsetool" "1" "September 2000" "teTeX" "teTeX"
+.TH "kpsetool" "1" "8 March 2022" "TeX Live"
.PP
.SH "NAME"
kpsetool \- script to make teTeX-style \fBkpsetool\fP,
@@ -90,17 +90,13 @@
.PP
.SH "BUGS"
.PP
-None known, but report any bugs found to <tetex at dbs\&.uni-hannover\&.de> (mailing list)\&.
+Email bug reports to <https://lists.tug.org/tex-k> (public mailing list).
.PP
.SH "AUTHOR"
.PP
\fBkpsetool\fP was written by Thomas Esser
-<te at dbs\&.uni-hannover\&.de> in March, 1997\&. \fBkpsetool\fP
+in March, 1997\&. \fBkpsetool\fP
is in the public domain\&.
.PP
-This manual page was written by C\&.M\&. Connelly
-<c at eskimo\&.com>, for
-the Debian GNU/Linux system\&. It may be used by other distributions
-without contacting the author\&. Any mistakes or omissions in the
-manual page are my fault; inquiries about or corrections to this
-manual page should be directed to me (and not to the primary author)\&.
+This manual page was written by C\&.M\&. Connelly for the Debian
+GNU/Linux system\&. It is now maintained as part of TeX Live.
Modified: trunk/Master/texmf-dist/doc/man/man1/kpsetool.man1.pdf
===================================================================
(Binary files differ)
Modified: trunk/Master/texmf-dist/doc/man/man1/kpsexpand.man1.pdf
===================================================================
(Binary files differ)
Modified: trunk/Master/texmf-dist/doc/man/man1/mkindex.1
===================================================================
--- trunk/Master/texmf-dist/doc/man/man1/mkindex.1 2022-03-08 13:03:59 UTC (rev 62516)
+++ trunk/Master/texmf-dist/doc/man/man1/mkindex.1 2022-03-08 17:55:27 UTC (rev 62517)
@@ -1,4 +1,4 @@
-.TH "mkindex" "1" "September 2000" "teTeX" "teTeX"
+.TH "mkindex" "1" "8 March 2022" "TeX Live"
.PP
.SH "NAME"
mkindex \- script to process LaTeX index and glossary files
@@ -27,16 +27,11 @@
.PP
.SH "BUGS"
.PP
-None known, but report any bugs found to <tetex at informatik\&.uni-hannover\&.de> (mailing list)\&.
+Email bug reports to <https://lists.tug.org/tex-k> (public mailing list).
.PP
.SH "AUTHOR"
.PP
-Written by Thomas Esser
-<te at informatik\&.uni-hannover\&.de>\&.
+Written by Thomas Esser.
.PP
-This manual page was written by C\&.M\&. Connelly
-<c at eskimo\&.com>, for
-the Debian GNU/Linux system\&. It may be used by other distributions
-without contacting the author\&. Any mistakes or omissions in the
-manual page are my fault; inquiries about or corrections to this
-manual page should be directed to me (and not to the primary author)\&.
+This manual page was written by C\&.M\&. Connelly for the Debian
+GNU/Linux system\&. It is now maintained as part of TeX Live.
Modified: trunk/Master/texmf-dist/doc/man/man1/mkindex.man1.pdf
===================================================================
(Binary files differ)
Modified: trunk/Master/texmf-dist/doc/man/man1/mkocp.1
===================================================================
--- trunk/Master/texmf-dist/doc/man/man1/mkocp.1 2022-03-08 13:03:59 UTC (rev 62516)
+++ trunk/Master/texmf-dist/doc/man/man1/mkocp.1 2022-03-08 17:55:27 UTC (rev 62517)
@@ -1,4 +1,4 @@
-.TH "mkocp" "1" "April 2017" "Omega"
+.TH "mkocp" "1" "8 March 2022" "TeX Live"
.PP
.SH "NAME"
mkocp \- frontend to \fBotp2ocp\fP(1)
@@ -26,16 +26,16 @@
.PP
\fBomega\fP(1), \fBotp2ocp\fP(1)\&.
.PP
-<https://ctan\&.org/pkg/omega>
+<https://ctan.org/pkg/omega>
.PP
+.SH "BUGS"
+.PP
+Email bug reports to <https://lists.tug.org/tex-k> (public mailing list).
+.PP
.SH "AUTHOR"
.PP
\fBmkocp\fP is part of Omega\&. The primary authors of Omega are John Plaice
and Yannis Haralambous\&.
.PP
-This manual page was written by C\&.M\&. Connelly
-<cmc at debian\&.org>, for
-the Debian GNU/Linux system\&. It may be used by other distributions
-without contacting the author\&. Any mistakes or omissions in the
-manual page are my fault; inquiries about or corrections to this
-manual page should be directed to me (and not to the primary author)\&.
+This manual page was written by C\&.M\&. Connelly for the Debian
+GNU/Linux system\&. It is now maintained as part of TeX Live.
Modified: trunk/Master/texmf-dist/doc/man/man1/mkocp.man1.pdf
===================================================================
(Binary files differ)
Modified: trunk/Master/texmf-dist/doc/man/man1/mkofm.1
===================================================================
--- trunk/Master/texmf-dist/doc/man/man1/mkofm.1 2022-03-08 13:03:59 UTC (rev 62516)
+++ trunk/Master/texmf-dist/doc/man/man1/mkofm.1 2022-03-08 17:55:27 UTC (rev 62517)
@@ -1,4 +1,4 @@
-.TH "mkofm" "1" "April 2017" "TeX Live"
+.TH "mkofm" "1" "8 March 2022" "TeX Live"
.PP
.SH "NAME"
mkofm \- front end to \fBmktextfm\fP(1)
@@ -14,18 +14,16 @@
.SH "SEE ALSO"
.PP
\fBmktextfm\fP(1)
+<https://ctan.org/pkg/omega>
.PP
.SH "BUGS"
.PP
-None known\&.
+Email bug reports to <https://lists.tug.org/tex-k> (public mailing list).
.PP
.SH "AUTHOR"
.PP
-Author unknown\&.
+\fBmkofm\fP is part of Omega\&. The primary authors of Omega are John Plaice
+and Yannis Haralambous\&.
.PP
-This manual page was written by C\&.M\&. Connelly
-<cmc at debian\&.org>, for
-the Debian GNU/Linux system\&. It may be used by other distributions
-without contacting the author\&. Any mistakes or omissions in the
-manual page are my fault; inquiries about or corrections to this
-manual page should be directed to me (and not to the primary author)\&.
+This manual page was written by C\&.M\&. Connelly for the Debian
+GNU/Linux system\&. It is now maintained as part of TeX Live.
Modified: trunk/Master/texmf-dist/doc/man/man1/mkofm.man1.pdf
===================================================================
(Binary files differ)
Modified: trunk/Master/texmf-dist/doc/man/man1/mktexfmt.man1.pdf
===================================================================
(Binary files differ)
Modified: trunk/Master/texmf-dist/doc/man/man1/ofm2opl.1
===================================================================
--- trunk/Master/texmf-dist/doc/man/man1/ofm2opl.1 2022-03-08 13:03:59 UTC (rev 62516)
+++ trunk/Master/texmf-dist/doc/man/man1/ofm2opl.1 2022-03-08 17:55:27 UTC (rev 62517)
@@ -1,4 +1,4 @@
-.TH OFM2OPL 1 "14 April 2016" "Web2C 2022"
+.TH OFM2OPL 1 "8 March 2022" "Web2C 2022"
.PP
.SH "NAME"
ofm2opl \- convert Omega and TeX font-metric files to property-list files
@@ -56,10 +56,12 @@
.PP
.SH "BUGS"
.PP
-Send bug reports to <http://lists.tug.org/tex-k>
-(mailing list); may also check if the same bug is present in
-\fBtftopl\fP(1)\&. General discussion of Omega (and Aleph) can take place
-on the <http://lists.tug.org/omega> mailing list.
+Email bug reports to <https://lists.tug.org/tex-k>
+(mailing list); good to check if the same bug is present in
+\fBtftopl\fP(1)\&.
+.PP
+General discussion of Omega (and Aleph) can take place
+on the <https://lists.tug.org/omega> mailing list\&.
.PP
.SH "SEE ALSO"
.PP
@@ -85,15 +87,10 @@
.RE
.PP
\fBofm2opl\fP is based on the WEB source code for \fBtftopl\fP(1),
-although nowadays it is a link to \fBomfonts\fP, implemented entirely in
-C.
+although nowadays it is a link to \fBomfonts\fP, implemented entirely in C.
.PP
-The primary authors of Omega are John Plaice and Yannis Haralambous.
+The primary authors of Omega were John Plaice and Yannis Haralambous.
Omega (and Aleph) are now maintained as part of TeX Live.
.PP
-This manual page was written by C\&.M\&. Connelly
-<cmc at debian\&.org>, for
-the Debian GNU/Linux system\&. It may be used by other distributions
-without contacting the author\&. Any mistakes or omissions in the
-manual page are my fault; inquiries about or corrections to this
-manual page should be directed to me (and not to the primary author)\&.
+This manual page was written by C\&.M\&. Connelly for the Debian
+GNU/Linux system\&. It is also now maintained as part of TeX Live.
Modified: trunk/Master/texmf-dist/doc/man/man1/ofm2opl.man1.pdf
===================================================================
(Binary files differ)
Modified: trunk/Master/texmf-dist/doc/man/man1/opl2ofm.1
===================================================================
--- trunk/Master/texmf-dist/doc/man/man1/opl2ofm.1 2022-03-08 13:03:59 UTC (rev 62516)
+++ trunk/Master/texmf-dist/doc/man/man1/opl2ofm.1 2022-03-08 17:55:27 UTC (rev 62517)
@@ -1,4 +1,4 @@
-.TH OPL2OFM 1 "16 June 2015" "Web2C 2022"
+.TH OPL2OFM 1 "8 March 2022" "Web2C 2022"
.PP
.SH "NAME"
opl2ofm \- convert Omega and TeX property-list files to font-metric files
@@ -33,8 +33,9 @@
.PP
.SH "BUGS"
.PP
-None known, but report any found to <omega at ens\&.fr> (mailing list)\&. You should also
-check to see if the bug is present in \fBpltotf\fP(1)\&.
+Email bug reports to <https://lists.tug.org/tex-k>
+(mailing list); good to check if the same bug is present in
+\fBpltotf\fP(1)\&.
.PP
.SH "SEE ALSO"
.PP
@@ -41,10 +42,6 @@
\fBomega\fP(1), \fBofm2opl\fP(1), \fBpltotf\fP(1),
\fBtftopl\fP(1)\&.
.PP
-\fIDraft Manual for the Omega System\fP (\fIomega-manual\&.dvi\fP)\&.
-.PP
-Web page: <http://www\&.gutenberg\&.eu\&.org/omega/>
-.PP
.SH "AUTHOR"
.PP
According to the WEB documentation:
@@ -63,13 +60,8 @@
program \fBOPL2OFM\fP\&.
.RE
.PP
-The primary authors of Omega are John Plaice
-<plaice at cse\&.unsw\&.edu\&.au> and Yannis Haralambous
-<yannis at fluxus-virus\&.com>\&.
+The primary authors of Omega were John Plaice and Yannis Haralambous.
+Omega (and Aleph) are now maintained as part of TeX Live.
.PP
-This manual page was written by C\&.M\&. Connelly
-<cmc at debian\&.org>, for
-the Debian GNU/Linux system\&. It may be used by other distributions
-without contacting the author\&. Any mistakes or omissions in the
-manual page are my fault; inquiries about or corrections to this
-manual page should be directed to me (and not to the primary author)\&.
+This manual page was written by C\&.M\&. Connelly for the Debian
+GNU/Linux system\&. It is also now maintained as part of TeX Live.
Modified: trunk/Master/texmf-dist/doc/man/man1/opl2ofm.man1.pdf
===================================================================
(Binary files differ)
Modified: trunk/Master/texmf-dist/doc/man/man1/otangle.man1.pdf
===================================================================
(Binary files differ)
Modified: trunk/Master/texmf-dist/doc/man/man1/otp2ocp.1
===================================================================
--- trunk/Master/texmf-dist/doc/man/man1/otp2ocp.1 2022-03-08 13:03:59 UTC (rev 62516)
+++ trunk/Master/texmf-dist/doc/man/man1/otp2ocp.1 2022-03-08 17:55:27 UTC (rev 62517)
@@ -1,4 +1,4 @@
-.TH "otp2ocp" "1" "April 2017" "TeX Live"
+.TH "otp2ocp" "1" "8 March 2022" "TeX Live"
.PP
.SH "NAME"
otp2ocp \- convert Omega Translation Process files to Omega
@@ -21,7 +21,7 @@
.PP
\fBmkocp\fP(1), \fBomega\fP(1)\&.
.PP
-<https://ctan\&.org/pkg/omega>
+<https://ctan.org/pkg/omega>
.PP
.SH "AUTHOR"
.PP
@@ -28,9 +28,5 @@
\fBmkocp\fP is part of Omega\&. The primary authors of Omega are John Plaice
and Yannis Haralambous\&.
.PP
-This manual page was written by C\&.M\&. Connelly
-<cmc at debian\&.org>, for
-the Debian GNU/Linux system\&. It may be used by other distributions
-without contacting the author\&. Any mistakes or omissions in the
-manual page are my fault; inquiries about or corrections to this
-manual page should be directed to me (and not to the primary author)\&.
+This manual page was written by C\&.M\&. Connelly for the Debian
+GNU/Linux system\&. It is now maintained as part of TeX Live.
Modified: trunk/Master/texmf-dist/doc/man/man1/otp2ocp.man1.pdf
===================================================================
(Binary files differ)
Modified: trunk/Master/texmf-dist/doc/man/man1/outocp.1
===================================================================
--- trunk/Master/texmf-dist/doc/man/man1/outocp.1 2022-03-08 13:03:59 UTC (rev 62516)
+++ trunk/Master/texmf-dist/doc/man/man1/outocp.1 2022-03-08 17:55:27 UTC (rev 62517)
@@ -1,4 +1,4 @@
-.TH "outocp" "1" "April 2017" "TeX Live"
+.TH "outocp" "1" "8 March 2022" "TeX Live"
.PP
.SH "NAME"
outocp \- debug an OCP file
@@ -18,22 +18,17 @@
.PP
.SH "BUGS"
.PP
-None known, but report any found to <omega at ens\&.fr> (mailing list)\&.
+Email bug reports to <https://lists.tug.org/tex-k> (public mailing list).
.PP
.SH "SEE ALSO"
.PP
\fBocp2otp\fP(1), \fBotp2ocp\fP(1), \fBomega\fP(1)\&.
+<https://ctan.org/pkg/omega>
.PP
-<https://ctan\&.org/pkg/omega>
-.PP
.SH "AUTHOR"
.PP
\fBmkocp\fP is part of Omega\&. The primary authors of Omega are John Plaice
and Yannis Haralambous\&.
.PP
-This manual page was written by C\&.M\&. Connelly
-<cmc at debian\&.org>, for
-the Debian GNU/Linux system\&. It may be used by other distributions
-without contacting the author\&. Any mistakes or omissions in the
-manual page are my fault; inquiries about or corrections to this
-manual page should be directed to me (and not to the primary author)\&.
+This manual page was written by C\&.M\&. Connelly for the Debian
+GNU/Linux system\&. It is now maintained as part of TeX Live.
Modified: trunk/Master/texmf-dist/doc/man/man1/outocp.man1.pdf
===================================================================
(Binary files differ)
Modified: trunk/Master/texmf-dist/doc/man/man1/ovf2ovp.1
===================================================================
--- trunk/Master/texmf-dist/doc/man/man1/ovf2ovp.1 2022-03-08 13:03:59 UTC (rev 62516)
+++ trunk/Master/texmf-dist/doc/man/man1/ovf2ovp.1 2022-03-08 17:55:27 UTC (rev 62517)
@@ -1,4 +1,4 @@
-.TH OVF2OVP 1 "14 April 2016" "Web2C 2022"
+.TH OVF2OVP 1 "8 March 2022" "Web2C 2022"
.PP
.SH "NAME"
ovf2ovp \- convert virtual font file and associated font metrics to property-list format
@@ -60,9 +60,11 @@
.PP
.SH "BUGS"
.PP
-Send bug reports to <http://lists.tug.org/tex-k>
-(mailing list); may also check if the same bug is present in
-\fBvftovp\fP(1)\&. General discussion of Omega (and Aleph) can take place
+Email bug reports to <https://lists.tug.org/tex-k>
+(mailing list); good to check if the same bug is present in
+\fBvftovp\fP(1)\&.
+.PP
+General discussion of Omega (and Aleph) can take place
on the <http://lists.tug.org/omega> mailing list.
.PP
.SH "SEE ALSO"
@@ -85,15 +87,10 @@
.RE
.PP
Thus, \fBovf2ovp\fP is based on the WEB source code for \fBvftovp\fP(1),
-although nowadays it is a link to \fBomfonts\fP, implemented entirely in
-C.
+although nowadays it is a link to \fBomfonts\fP, implemented entirely in C.
.PP
-The primary authors of Omega are John Plaice and Yannis Haralambous.
+The primary authors of Omega were John Plaice and Yannis Haralambous.
Omega (and Aleph) are now maintained as part of TeX Live.
.PP
-This manual page was written by C\&.M\&. Connelly
-<cmc at debian\&.org>, for
-the Debian GNU/Linux system\&. It may be used by other distributions
-without contacting the author\&. Any mistakes or omissions in the
-manual page are my fault; inquiries about or corrections to this
-manual page should be directed to me (and not to the primary author)\&.
+This manual page was written by C\&.M\&. Connelly for the Debian
+GNU/Linux system\&. It is also now maintained as part of TeX Live.
Modified: trunk/Master/texmf-dist/doc/man/man1/ovf2ovp.man1.pdf
===================================================================
(Binary files differ)
Modified: trunk/Master/texmf-dist/doc/man/man1/ovp2ovf.1
===================================================================
--- trunk/Master/texmf-dist/doc/man/man1/ovp2ovf.1 2022-03-08 13:03:59 UTC (rev 62516)
+++ trunk/Master/texmf-dist/doc/man/man1/ovp2ovf.1 2022-03-08 17:55:27 UTC (rev 62517)
@@ -1,4 +1,4 @@
-.TH OVP2OVF 1 "16 June 2015" "Web2C 2022"
+.TH OVP2OVF 1 "8 March 2022" "Web2C 2022"
.PP
.SH "NAME"
ovp2ovf \- convert a virtual property-list file into a virtual font file and its associated font metric file
@@ -39,8 +39,9 @@
.PP
.SH "BUGS"
.PP
-None known, but report any found to <omega at ens\&.fr> (mailing list)\&. You should also
-check to see if the bug is in \fBvptovf\fP(1)\&.
+Email bug reports to <https://lists.tug.org/tex-k>
+(mailing list); good to check if the same bug is present in
+\fBvptovf\fP(1)\&.
.PP
.SH "SEE ALSO"
.PP
@@ -48,10 +49,6 @@
\fBpltotf\fP(1), \fBtftopl\fP(1), \fBvftovp\fP(1),
\fBvptovf\fP(1)
.PP
-\fIDraft Manual for the Omega System\fP (\fIomega-manual\&.dvi\fP)\&.
-.PP
-Web page: <http://www\&.gutenberg\&.eu\&.org/omega/>
-.PP
.SH "AUTHOR"
.PP
According to the WEB documentation:
@@ -66,14 +63,8 @@
called \fBPLFONT\fP\&.
.RE
.PP
-The primary authors of Omega are John Plaice
-<plaice at cse\&.unsw\&.edu\&.au> and Yannis Haralambous
-<yannis at fluxus-virus\&.com>\&.
+The primary authors of Omega were John Plaice and Yannis Haralambous.
+Omega (and Aleph) are now maintained as part of TeX Live.
.PP
-This manual page was written by C\&.M\&. Connelly
-<cmc at debian\&.org>, for
-the Debian GNU/Linux system\&. It may be used by other distributions
-without contacting the author\&. Any mistakes or omissions in the
-manual page are my fault; inquiries about or corrections to this
-manual page should be directed to me (and not to the primary author)\&.
-.PP
+This manual page was written by C\&.M\&. Connelly for the Debian
+GNU/Linux system\&. It is also now maintained as part of TeX Live.
Modified: trunk/Master/texmf-dist/doc/man/man1/ovp2ovf.man1.pdf
===================================================================
(Binary files differ)
Modified: trunk/Master/texmf-dist/doc/man/man1/pslatex.1
===================================================================
--- trunk/Master/texmf-dist/doc/man/man1/pslatex.1 2022-03-08 13:03:59 UTC (rev 62516)
+++ trunk/Master/texmf-dist/doc/man/man1/pslatex.1 2022-03-08 17:55:27 UTC (rev 62517)
@@ -1,4 +1,4 @@
-.TH "pslatex" "1" "September 2000" "teTeX" "teTeX"
+.TH "pslatex" "1" "8 March 2022" "TeX Live"
.PP
.SH "NAME"
pslatex \- utility to typeset LaTeX files using PostScript fonts
@@ -29,16 +29,11 @@
.PP
.SH "BUGS"
.PP
-None known\&. Report any found to the author\&.
+Email bug reports to <https://lists.tug.org/tex-k> (public mailing list).
.PP
.SH "AUTHOR"
.PP
-\fBpslatex\fP was written by David Carlisle
-<david at dcarlisle\&.demon\&.co\&.uk>\&.
+\fBpslatex\fP was written by David Carlisle.
.PP
-This manual page was written by C\&.M\&. Connelly
-<c at eskimo\&.com>, for
-the Debian GNU/Linux system\&. It may be used by other distributions
-without contacting the author\&. Any mistakes or omissions in the
-manual page are my fault; inquiries about or corrections to this
-manual page should be directed to me (and not to the primary author)\&.
+This manual page was written by C\&.M\&. Connelly for the Debian
+GNU/Linux system\&. It is now maintained as part of TeX Live.
Modified: trunk/Master/texmf-dist/doc/man/man1/pslatex.man1.pdf
===================================================================
(Binary files differ)
Modified: trunk/Master/texmf-dist/doc/man/man1/rubibtex.1
===================================================================
--- trunk/Master/texmf-dist/doc/man/man1/rubibtex.1 2022-03-08 13:03:59 UTC (rev 62516)
+++ trunk/Master/texmf-dist/doc/man/man1/rubibtex.1 2022-03-08 17:55:27 UTC (rev 62517)
@@ -1,4 +1,4 @@
-.TH "rubibtex" "1" "October 2000" "teTeX" "teTeX"
+.TH "rubibtex" "1" "8 March 2022" "TeX Live"
.PP
.SH "NAME"
rubibtex \- make a bibliography for (La)TeX using Russian
@@ -32,7 +32,7 @@
.PP
.SH "BUGS"
.PP
-None known, but report any bugs found to the authors\&.
+Email bug reports to <https://lists.tug.org/tex-k> (public mailing list).
.PP
.SH "COPYRIGHT"
.PP
@@ -45,19 +45,11 @@
.PP
.SH "SEE ALSO"
.PP
-\fBbibtex\fP(1), \fBsed\fP(1),
-<ftp://ftp\&.vsu\&.ru/pub/tex/T2/README>\&.
+\fBbibtex\fP(1), \fBsed\fP(1).
.PP
.SH "AUTHOR"
.PP
-Werner Lemberg
-<wl at gnu\&.org>, Vladimir Volovich
-<TeX at vvv\&.vsu\&.ru>\&.
+Werner Lemberg, Vladimir Volovich.
.PP
-This manual page was written by C\&.M\&. Connelly
-<c at eskimo\&.com>, for
-the Debian GNU/Linux system\&. It may be used by other distributions
-without contacting the author\&. Any mistakes or omissions in the
-manual page are my fault; inquiries about or corrections to this
-manual page should be directed to me (and not to the primary author)\&.
-.PP
+This manual page was written by C\&.M\&. Connelly for the Debian
+GNU/Linux system\&. It is now maintained as part of TeX Live.
Modified: trunk/Master/texmf-dist/doc/man/man1/rubibtex.man1.pdf
===================================================================
(Binary files differ)
Modified: trunk/Master/texmf-dist/doc/man/man1/rumakeindex.1
===================================================================
--- trunk/Master/texmf-dist/doc/man/man1/rumakeindex.1 2022-03-08 13:03:59 UTC (rev 62516)
+++ trunk/Master/texmf-dist/doc/man/man1/rumakeindex.1 2022-03-08 17:55:27 UTC (rev 62517)
@@ -1,4 +1,4 @@
-.TH "rumakeindex" "1" "September 2000" "teTeX" "teTeX"
+.TH "rumakeindex" "1" "8 March 2022" "TeX Live"
.PP
.SH "NAME"
rumakeindex \- process a LaTeX index using Russian Cyrillic
@@ -32,7 +32,7 @@
.PP
.SH "BUGS"
.PP
-None known, but report any bugs found to the authors\&.
+Email bug reports to <https://lists.tug.org/tex-k> (public mailing list).
.PP
.SH "COPYRIGHT"
.PP
@@ -45,19 +45,11 @@
.PP
.SH "SEE ALSO"
.PP
-\fBmakeindex\fP(1), \fBsed\fP(1), \fBtr\fP(1),
-<ftp://ftp\&.vsu\&.ru/pub/tex/T2/README>\&.
+\fBmakeindex\fP(1), \fBsed\fP(1), \fBtr\fP(1).
.PP
.SH "AUTHOR"
.PP
-Werner Lemberg
-<wl at gnu\&.org>, Vladimir Volovich
-<TeX at vvv\&.vsu\&.ru>\&.
+Werner Lemberg, Vladimir Volovich
.PP
-This manual page was written by C\&.M\&. Connelly
-<c at eskimo\&.com>, for
-the Debian GNU/Linux system\&. It may be used by other distributions
-without contacting the author\&. Any mistakes or omissions in the
-manual page are my fault; inquiries about or corrections to this
-manual page should be directed to me (and not to the primary author)\&.
-.PP
+This manual page was written by C\&.M\&. Connelly for the Debian
+GNU/Linux system\&. It is now maintained as part of TeX Live.
Modified: trunk/Master/texmf-dist/doc/man/man1/rumakeindex.man1.pdf
===================================================================
(Binary files differ)
Modified: trunk/Master/texmf-dist/doc/man/man1/tangle.1
===================================================================
--- trunk/Master/texmf-dist/doc/man/man1/tangle.1 2022-03-08 13:03:59 UTC (rev 62516)
+++ trunk/Master/texmf-dist/doc/man/man1/tangle.1 2022-03-08 17:55:27 UTC (rev 62517)
@@ -1,4 +1,4 @@
-.TH TANGLE 1 "16 June 2015" "Web2C 2022"
+.TH TANGLE 1 "02 March 2022" "Web2C 2022"
.\"=====================================================================
.if n .ds MF Metafont
.if t .ds MF Metafont
@@ -21,7 +21,12 @@
.B tangle
.RI [ options ]
.IR webfile [ \fB.web\fP ]
-.RI [ changefile [ \fB.ch\fP ]]
+[ {
+.IR changefile [ \fB.ch\fP ]
+|\-}
+[
+.IR outfile [ \fB.p\fP ]
+] ]
.\"=====================================================================
.SH DESCRIPTION
This manual page is not meant to be exhaustive. The complete
@@ -47,23 +52,29 @@
simple, although adequate, macro facility that permits a Pascal program
to be written in small easily-understood modules.
.PP
-The command line should have either one or two names on it.
+The command line should have one, two or three names on it.
The first is taken as the \*(WB file (and
.B .web
is added if there is no
extension).
-If there is another name, it is a change file (and
+If there is second name, it is a change file (and
.B .ch
is added if there is
no extension). The change file overrides parts of the \*(WB file,
as described in the \*(WB system documentation.
.PP
-The output files are a Pascal file and a string pool file,
-whose names are formed by adding
+If there is a third name, it is the Pascal output file (and
.B .p
-and
+is added if there is no extension). In this case you can specify an empty
+change file with '-' as the second argument.
+Otherwise the name of the Pascal file is formed by adding
+.B .p
+to the root of the \*(WB file name.
+.PP
+An optional second output file is a string pool file,
+whose name is formed by adding
.B .pool
-respectively to the root of the \*(WB file name.
+to the root of the Pascal file name.
.\"=====================================================================
.SH "OPTIONS"
This version of
Modified: trunk/Master/texmf-dist/doc/man/man1/tangle.man1.pdf
===================================================================
(Binary files differ)
Modified: trunk/Master/texmf-dist/doc/man/man1/texlinks.1
===================================================================
--- trunk/Master/texmf-dist/doc/man/man1/texlinks.1 2022-03-08 13:03:59 UTC (rev 62516)
+++ trunk/Master/texmf-dist/doc/man/man1/texlinks.1 2022-03-08 17:55:27 UTC (rev 62517)
@@ -1,4 +1,4 @@
-.TH "texlinks" "8" "November 2007" "teTeX" "teTeX"
+.TH "texlinks" "1" ""8 March 2022" "TeX Live"
.PP
.SH "NAME"
texlinks \- maintain symbolic links from format to engine
@@ -46,21 +46,16 @@
.PP
\fBfmtutil\fP(1), \fBfmtutil\&.cnf\fP(5)
.PP
-Web page: <http://tug\&.org/teTeX/>
+Web page: <https://tug.org/texlive/>
.PP
.SH "BUGS"
.PP
-None known, but report any bugs found to <tex-k at tug\&.org> (mailing list)\&.
+Email bug reports to <https://lists.tug.org/tex-k> (public mailing list).
.PP
.SH "AUTHOR"
.PP
-\fBtexlinks\fP was written by Thomas Esser
-<te at dbs\&.uni-hannover\&.de> in 1999\&.
+\fBtexlinks\fP was written by Thomas Esser in 1999\&.
\fBtexlinks\fP has been released into the public domain\&.
.PP
-This manual page was written by C\&.M\&. Connelly
-<c at eskimo\&.com>, for
-the Debian GNU/Linux system\&. It may be used by other distributions
-without contacting the author\&. Any mistakes or omissions in the
-manual page are my fault; inquiries about or corrections to this
-manual page should be directed to me (and not to the primary author)\&.
+This manual page was written by C\&.M\&. Connelly for the Debian
+GNU/Linux system\&. It is now maintained as part of TeX Live.
Modified: trunk/Master/texmf-dist/doc/man/man1/texlinks.man1.pdf
===================================================================
(Binary files differ)
Modified: trunk/Master/texmf-dist/doc/man/man1/ttf2afm.1
===================================================================
--- trunk/Master/texmf-dist/doc/man/man1/ttf2afm.1 2022-03-08 13:03:59 UTC (rev 62516)
+++ trunk/Master/texmf-dist/doc/man/man1/ttf2afm.1 2022-03-08 17:55:27 UTC (rev 62517)
@@ -1,4 +1,4 @@
-.TH TTF2AFM 1 "8 March 2016" "Web2C 2022"
+.TH TTF2AFM 1 "8 March 2022" "Web2C 2022"
.PP
.SH "NAME"
ttf2afm \- utility to generate AFM files for TrueType fonts
@@ -58,10 +58,10 @@
.PP
.SH "SEE ALSO"
afm2tfm(1), afm2pl(1).
-FontForge (http://fontforge.sf.net).
-LCDF TypeTools (http://lcdf.org).
+FontForge (https://fontforge.org).
+LCDF TypeTools (https://lcdf.org).
A closer look at TrueType fonts and pdfTeX, Han The Thanh
-(http://tug.org/TUGboat/tb30-1/tb94thanh.pdf).
+(https://tug.org/TUGboat/tb30-1/tb94thanh.pdf).
.PP
.SH "BUGS"
.PP
Modified: trunk/Master/texmf-dist/doc/man/man1/ttf2afm.man1.pdf
===================================================================
(Binary files differ)
Modified: trunk/Master/texmf-dist/doc/man/man1/updmap-sys.man1.pdf
===================================================================
(Binary files differ)
Modified: trunk/Master/texmf-dist/doc/man/man1/updmap-user.man1.pdf
===================================================================
(Binary files differ)
Modified: trunk/Master/texmf-dist/doc/man/man1/updmap.1
===================================================================
--- trunk/Master/texmf-dist/doc/man/man1/updmap.1 2022-03-08 13:03:59 UTC (rev 62516)
+++ trunk/Master/texmf-dist/doc/man/man1/updmap.1 2022-03-08 17:55:27 UTC (rev 62517)
@@ -1,60 +1,33 @@
-.\" DO NOT MODIFY THIS FILE! It was generated by help2man 1.49.1.
-.TH UPDMAP "1" "March 2022" "TeX Live" "User Commands"
+.\" DO NOT MODIFY THIS FILE! It was generated by help2man 1.45.1.
+.TH UPDMAP "1" "May 2014" "TeX Live" "User Commands"
.SH NAME
-updmap \- manage TeX font maps
+updmap \- manage TeX font maps, per-user
.br
updmap-sys \- manage TeX font maps, system-wide
-.br
-updmap-user \- manage TeX font maps, per-user
.SH SYNOPSIS
.B updmap
-[\fI\,-user|-sys\/\fR] [\fI\,OPTION\/\fR] ... [\fI\,COMMAND\/\fR]
-.br
-.B updmap-user
[\fI\,OPTION\/\fR] ... [\fI\,COMMAND\/\fR]
.br
.B updmap-sys
[\fI\,OPTION\/\fR] ... [\fI\,COMMAND\/\fR]
.SH DESCRIPTION
-updmap version r59152 (2021\-05\-09 23:49:52 +0200)
+updmap version svn33988 (2014\-05\-12 15:39:32 +0900)
.PP
-Update the default font map files used by pdftex and dvipdfm(x)
-(pdftex.map), dvips (psfonts.map), and optionally pxdvi, as determined
-by all configuration files updmap.cfg (usually the ones returned by
-running "kpsewhich \fB\-\-all\fR updmap.cfg", but see below).
+Update the default font map files used by pdftex, dvips, and dvipdfm(x),
+and optionally pxdvi, as determined by all configuration files updmap.cfg
+(the ones returned by running "kpsewhich \fB\-\-all\fR updmap.cfg", but see below).
.PP
Among other things, these map files are used to determine which fonts
should be used as bitmaps and which as outlines, and to determine which
-font files are included, typically subsetted, in the PDF or PostScript output.
+font files are included in the PDF or PostScript output.
.PP
-updmap\-sys (or updmap \fB\-sys\fR) is intended to affect the system\-wide
-configuration, while updmap\-user (or updmap \fB\-user\fR) affects personal
-configuration files only, overriding the system files.
+updmap\-sys is intended to affect the system\-wide configuration, while
+updmap affects personal configuration files only, overriding the system
+files. As a consequence, once updmap has been run, even a single time,
+running updmap\-sys no longer has any effect. (updmap\-sys issues a
+warning in this situation.)
.PP
-As a consequence, once updmap\-user has been run, even a single time,
-running updmap\-sys no longer has any effect. updmap\-sys issues a
-warning about this, since it is rarely desirable.
-See https://tug.org/texlive/scripts\-sys\-user.html for details.
-.PP
By default, the TeX filename database (ls\-R) is also updated.
-.PP
-The updmap system is regrettably complicated, for both inherent and
-historical reasons. A general overview:
-.PP
-\- updmap.cfg files are mainly about listing other files, namely the
-.IP
-font\-specific .maps, in which each line gives information about a
-different TeX (.tfm) font.
-.PP
-\- updmap reads the updmap.cfg files and then concatenates the
-.IP
-contents of those .map files into the main output files: psfonts.map
-for dvips and pdftex.map for pdftex and dvipdfmx.
-.PP
-\- The updmap.cfg files themselves are created and updated at package
-.IP
-installation time, by the system installer or the package manager or
-by hand, and not (by default) by updmap.
.SH OPTIONS
.TP
\fB\-\-cnffile\fR FILE
@@ -87,14 +60,11 @@
do not recreate map files
.TP
\fB\-\-nohash\fR
-do not run mktexlsr (a.k.a. texhash)
+do not run texhash
.TP
\fB\-\-sys\fR
affect system\-wide files (equivalent to updmap\-sys)
.TP
-\fB\-\-user\fR
-affect personal files (equivalent to updmap\-user)
-.TP
\fB\-n\fR, \fB\-\-dry\-run\fR
only show the configuration, no output
.TP
@@ -126,57 +96,29 @@
.TP
\fB\-\-enable\fR Map=MAPFILE
add "Map MAPFILE" to updmap.cfg
+.HP
+\fB\-\-enable\fR MixedMap=MAPFILE add "MixedMap MAPFILE" to updmap.cfg
+.HP
+\fB\-\-enable\fR KanjiMap=MAPFILE add "KanjiMap MAPFILE" to updmap.cfg
.TP
-\fB\-\-enable\fR MixedMap=MAPFILE
-add "MixedMap MAPFILE" to updmap.cfg
-.TP
-\fB\-\-enable\fR KanjiMap=MAPFILE
-add "KanjiMap MAPFILE" to updmap.cfg
-.TP
\fB\-\-disable\fR MAPFILE
disable MAPFILE, of whatever type
.TP
\fB\-\-listmaps\fR
-list all maps (details below)
+list all active and inactive maps
.TP
\fB\-\-listavailablemaps\fR
-list available maps (details below)
+same as \fB\-\-listmaps\fR, but without
+unavailable map files
.TP
\fB\-\-syncwithtrees\fR
disable unavailable map files in updmap.cfg
.PP
-The main output:
-.IP
-The main output of updmap is the files containing the individual font
-map lines which the drivers (dvips, pdftex, etc.) read to handle fonts.
-.IP
-The map files for dvips (psfonts.map) and pdftex and dvipdfmx
-(pdftex.map) are written to TEXMFVAR/fonts/map/updmap/{dvips,pdftex}/.
-.IP
-In addition, information about Kanji fonts is written to
-TEXMFVAR/fonts/map/updmap/dvipdfmx/kanjix.map, and optionally to
-TEXMFVAR/fonts/map/updmap/pxdvi/xdvi\-ptex.map. These are for Kanji
-only and are not like other map files. dvipdfmx reads pdftex.map for
-the map entries for non\-Kanji fonts.
-.IP
-If no option is given, so the invocation is just "updmap\-user" or
-"updmap\-sys", these output files are always recreated.
-.IP
-Otherwise, if an option such as \fB\-\-enable\fR or \fB\-\-disable\fR is given, the
-output files are recreated if the list of enabled map files (from
-updmap.cfg) has changed. The \fB\-\-force\fR option overrides this,
-always recreating the output files.
-.PP
-Explanation of the map types:
-.IP
-The normal type is Map.
-.IP
-The only difference between Map and MixedMap is that MixedMap entries
-are not added to psfonts_pk.map. The purpose is to help users with
-devices that render Type 1 outline fonts worse than mode\-tuned Type 3
-bitmap fonts. So, MixedMap is used for fonts that are available as
-both Type 1 and Metafont.
-.IP
+Explanation of the map types: the (only) difference between Map and
+MixedMap is that MixedMap entries are not added to psfonts_pk.map.
+The purpose is to help users with devices that render Type 1 outline
+fonts worse than mode\-tuned Type 1 bitmap fonts. So, MixedMap is used
+for fonts that are available as both Type 1 and Metafont.
KanjiMap entries are added to psfonts_t1.map and kanjix.map.
.PP
Explanation of the OPTION names for \fB\-\-showoptions\fR, \fB\-\-showoption\fR, \fB\-\-setoption\fR:
@@ -201,20 +143,11 @@
.IP
Whether maps for pxdvi (Japanese\-patched xdvi) are under updmap's control.
.TP
-jaEmbed
+kanjiEmbed
(any string)
.TP
-jaVariant
+kanjiVariant
(any string)
-.TP
-scEmbed
-(any string)
-.TP
-tcEmbed
-(any string)
-.TP
-koEmbed
-(any string)
.IP
See below.
.TP
@@ -244,24 +177,21 @@
command\-line options or configuration files to the programs, as
explained at the beginning of updmap.cfg.
.IP
-The options jaEmbed and jaVariant (formerly kanjiEmbed and kanjiVariant)
-specify special replacements in the map lines. If a map contains the
-string @jaEmbed@, then this will be replaced by the value of that option;
-similarly for jaVariant. In this way, users of Japanese TeX can select
-different fonts to be included in the final output. The counterpart for
-Simplified Chinese, Traditional Chinese and Korean fonts are
-scEmbed, tcEmbed and koEmbed respectively.
+The options kanjiEmbed and kanjiVariant specify special replacements
+in the map lines. If a map contains the string @kanjiEmbed@, then
+this will be replaced by the value of that option; similarly for
+kanjiVariant. In this way, users of Japanese TeX can select different
+fonts to be included in the final output.
.SH ENVIRONMENT
.PP
Explanation of trees and files normally used:
.IP
-If \fB\-\-cnffile\fR is specified on the command line (can be given multiple
-times), its value(s) is(are) used. Otherwise, updmap reads all the
-updmap.cfg files found by running `kpsewhich \fB\-all\fR updmap.cfg',
-in the order returned by kpsewhich (which is the order of trees
-defined in texmf.cnf).
+If \fB\-\-cnffile\fR is specified on the command line (possibly multiple
+times), its value(s) are used. Otherwise, updmap reads all the
+updmap.cfg files found by running `kpsewhich \fB\-all\fR updmap.cfg', in the
+order returned by kpsewhich.
.IP
-In either case, if multiple updmap.cfg files are found, all the maps
+In any case, if multiple updmap.cfg files are found, all the maps
mentioned in all the updmap.cfg files are merged.
.IP
Thus, if updmap.cfg files are present in all trees, and the default
@@ -275,7 +205,7 @@
TEXMFLOCAL \fI\,$TEXLIVE/texmf\-local/web2c/updmap.cfg\/\fP
TEXMFDIST \fI\,$TEXLIVE/YYYY/texmf\-dist/web2c/updmap.cfg\/\fP
.IP
-For updmap\-user:
+For updmap:
TEXMFCONFIG $HOME/.texliveYYYY/texmf\-config/web2c/updmap.cfg
TEXMFVAR $HOME/.texliveYYYY/texmf\-var/web2c/updmap.cfg
TEXMFHOME \fI\,$HOME/texmf/web2c/updmap.cfg\/\fP
@@ -290,31 +220,25 @@
According to the actions, updmap might write to one of the given files
or create a new updmap.cfg, described further below.
.PP
-Where and which updmap.cfg changes are saved:
+Where changes are saved:
.IP
-When no options are given, the updmap.cfg file(s) are only read, not
-written. It's when an option \fB\-\-setoption\fR, \fB\-\-enable\fR or \fB\-\-disable\fR is
-specified that an updmap.cfg needs to be updated. In this case:
+If config files are given on the command line, then the first one
+given will be used to save any changes from \fB\-\-setoption\fR, \fB\-\-enable\fR
+or \fB\-\-disable\fR. If the config files are taken from kpsewhich output,
+then the algorithm is more complex:
.IP
-1) If config files are given on the command line, then the first one
-given is used to save any such changes.
-.IP
-2) If the config files are taken from kpsewhich output, then the
-algorithm is more complex:
-.IP
-2a) If \fI\,$TEXMFCONFIG/web2c/updmap.cfg\/\fP or \fI\,$TEXMFHOME/web2c/updmap.cfg\/\fP
+1) If \fI\,$TEXMFCONFIG/web2c/updmap.cfg\/\fP or \fI\,$TEXMFHOME/web2c/updmap.cfg\/\fP
appears in the list of used files, then the one listed first by
kpsewhich \fB\-\-all\fR (equivalently, the one returned by kpsewhich
updmap.cfg), is used.
.IP
-2b) If neither of the above two are present and changes are made, a
+2) If neither of the above two are present and changes are made, a
new config file is created in \fI\,$TEXMFCONFIG/web2c/updmap.cfg\/\fP.
.IP
-In general, the idea is that if the user cannot write to a given
-config file, a higher\-level one can be used. That way, the
-distribution's settings can be overridden system\-wide using
-TEXMFLOCAL, and system settings can be overridden again in a
-particular user's TEXMFHOME or TEXMFCONFIG.
+In general, the idea is that if a given config file is not writable, a
+higher\-level one can be used. That way, the distribution's settings
+can be overridden for system\-wide using TEXMFLOCAL, and then system
+settings can be overridden again for a particular using using TEXMFHOME.
.PP
Resolving multiple definitions of a font:
.IP
@@ -334,13 +258,9 @@
or
.IP
#! MixedMap mapname.map
-.TP
+.IP
in the higher\-priority updmap.cfg file.
-(The #! must be at the
.IP
-beginning of the line, with at least one space or tab afterward, and
-whitespace between each word on the list.)
-.IP
As an example, suppose you have a copy of MathTime Pro fonts
and want to disable the Belleek version of the fonts; that is,
disable the map belleek.map. You can create the file
@@ -352,26 +272,16 @@
.IP
and call updmap.
.PP
-Listing of maps:
-.IP
-The two options \fB\-\-listmaps\fR and \fB\-\-listavailablemaps\fR list all maps
-defined in any of the updmap.cfg files (for \fB\-\-listmaps\fR), and
-only those actually found on the system (for \fB\-\-listavailablemaps\fR).
-The output format is one line per font map, with the following
-fields separated by tabs: map, type (Map, MixedMap, KanjiMap),
-status (enabled, disabled), origin (the updmap.cfg file where
-it is mentioned, or 'builtin' for the three basic maps).
-.IP
-In the case of \fB\-\-listmaps\fR there can be one additional fields
-(again separated by tab) containing '(not available)' for those
-map files that cannot be found.
+updmap writes the map files for dvips (psfonts.map) and pdftex
+(pdftex.map) to the TEXMFVAR/fonts/map/updmap/{dvips,pdftex}/
+directories.
.PP
-updmap\-user vs. updmap\-sys:
-.IP
+The log file is written to TEXMFVAR/web2c/updmap.log.
+.PP
When updmap\-sys is run, TEXMFSYSCONFIG and TEXMFSYSVAR are used
-instead of TEXMFCONFIG and TEXMFVAR, respectively. This is the
-primary difference between updmap\-sys and updmap\-user.
-.IP
+instead of TEXMFCONFIG and TEXMFVAR, respectively. This is the only
+difference between updmap\-sys and updmap.
+.PP
Other locations may be used if you give them on the command line, or
these trees don't exist, or you are not using the original TeX Live.
.PP
@@ -379,11 +289,9 @@
will be read and written, give the \fB\-n\fR option (or read the source).
.SH EXAMPLES
.PP
-The log file is written to TEXMFVAR/web2c/updmap.log.
-.PP
For step\-by\-step instructions on making new fonts known to TeX, read
-https://tug.org/fonts/fontinstall.html. For even more terse
-instructions, read the beginning of the main updmap.cfg file.
+http://tug.org/fonts/fontinstall.html. For even more terse
+instructions, read the beginning of the main updmap.cfg.
.SH FILES
Configuration and input files:
.IP "\fIupdmap\&.cfg\fP"
@@ -449,7 +357,7 @@
of \fIpsfonts\&.map\fP\&.
.IP "\fIconfig\&.pdf\fP"
Loads \fIpsfonts_t1\&.map\fP instead
-of \fIpsfonts\&.map\fP and has additional settings for PDF generation\&.
+of \fIpsfonts\&.map\fP and has additional optimizations for PDF generation\&.
.IP "\fIconfig\&.pk\fP"
Loads \fIpsfonts_pk\&.map\fP instead
of \fIpsfonts\&.map\fP\&.
@@ -461,6 +369,6 @@
Loads \fIpsfonts_t1\&.map\fP instead
of \fIpsfonts\&.map\fP\&.
.SH "REPORTING BUGS"
-Report bugs to: tex\-live at tug.org
+Report bugs to: tex\-k at tug.org
.br
-TeX Live home page: <https://tug.org/texlive/>
+TeX Live home page: <http://tug.org/texlive/>
Modified: trunk/Master/texmf-dist/doc/man/man1/updmap.man1.pdf
===================================================================
(Binary files differ)
Modified: trunk/Master/texmf-dist/doc/man/man1/weave.1
===================================================================
--- trunk/Master/texmf-dist/doc/man/man1/weave.1 2022-03-08 13:03:59 UTC (rev 62516)
+++ trunk/Master/texmf-dist/doc/man/man1/weave.1 2022-03-08 17:55:27 UTC (rev 62517)
@@ -1,4 +1,4 @@
-.TH WEAVE 1 "09 January 2022" "Web2C 2022"
+.TH WEAVE 1 "02 March 2022" "Web2C 2022"
.\"=====================================================================
.if n .ds MF Metafont
.if t .ds MF Metafont
@@ -21,7 +21,12 @@
.B weave
.RB [ \-x ]
.IR webfile [ \fB.web\fP ]
-.RI [ changefile [ \fB.ch\fP ]]
+[ {
+.IR changefile [ \fB.ch\fP ]
+|\-}
+[
+.IR outfile [ \fB.tex\fP ]
+] ]
.\"=====================================================================
.SH DESCRIPTION
This manual page is not meant to be exhaustive. The complete
@@ -49,7 +54,8 @@
.PP
The output \*(TX file name is formed by adding
.B .tex
-to the root of the \*(WB file name.
+to the root of the \*(WB file name or from the third argument.
+In this case you can specify '-' as an empty change file.
.PP
There are several macros
that probably should be redefined by
Modified: trunk/Master/texmf-dist/doc/man/man1/weave.man1.pdf
===================================================================
(Binary files differ)
Modified: trunk/Master/texmf-dist/doc/man/man5/fmtutil.cnf.5
===================================================================
--- trunk/Master/texmf-dist/doc/man/man5/fmtutil.cnf.5 2022-03-08 13:03:59 UTC (rev 62516)
+++ trunk/Master/texmf-dist/doc/man/man5/fmtutil.cnf.5 2022-03-08 17:55:27 UTC (rev 62517)
@@ -1,4 +1,4 @@
-.TH "fmtutil\&.cnf" "5" "October 2000" "teTeX" "teTeX"
+.TH "fmtutil\&.cnf" "5" "8 March 2022" "TeX Live"
.PP
.SH "NAME"
fmtutil\&.cnf \- configuration file for fmtutil
@@ -57,21 +57,15 @@
\fBamstex\fP(1), \fBetex\fP(1), \fBfmtutil\fP(8),
\fBtex\fP(1), \fBtexconfig\fP(8), \fBtexlinks\fP(8)\&.
.PP
-Web page: <http://tug\&.org/teTeX/>
+<https://tug.org/texlive/scripts-sys-user.html>
.PP
.SH "BUGS"
.PP
-None known, but report any bugs found to <tetex at dbs\&.uni-hannover\&.de> (mailing list)\&.
+Email bug reports to <https://lists.tug.org/tex-k> (public mailing list).
.PP
.SH "AUTHOR"
.PP
-\fIfmtutil\&.cnf\fP was written by Thomas Esser
-<te at dbs\&.uni-hannover\&.de>, and is Copyright 1998,
-1999 but released into the public domain\&.
+\fBfmtutil\fP and \fIfmtutil\&.cnf\fP was originally written by Thomas Esser.
.PP
-This manual page was written by C\&.M\&. Connelly
-<c at eskimo\&.com>, for
-the Debian GNU/Linux system\&. It may be used by other distributions
-without contacting the author\&. Any mistakes or omissions in the
-manual page are my fault; inquiries about or corrections to this
-manual page should be directed to me (and not to the primary author)\&.
+This manual page was written by C\&.M\&. Connelly for the Debian
+GNU/Linux system\&. It is now maintained as part of TeX Live.
Modified: trunk/Master/texmf-dist/doc/man/man5/fmtutil.cnf.man5.pdf
===================================================================
(Binary files differ)
More information about the tex-live-commits
mailing list.