Pdflatex

Dr Nicholas Bailey Nicholas.Bailey at glasgow.ac.uk
Tue Oct 13 12:48:59 CEST 2020


gs -q -sDEVICE=pdfwrite -dCompatibilityLevel=1.5 -o out.pdf in.pdf

/might/ work.  I found it here:

	https://superuser.com/a/1537573

But as the man says, you have to ask yourself which bits of PDF 1.7 are 
getting messed with when converting to 1.5, and how.

On Tuesday, 13 October 2020 10:28:06 BST Uwe Ziegenhagen wrote:
> Well, you need to convert them to PDF level 1.5.
> 
> I have no specific idea how to do so, but two options should work:
> 
> a) Use Acrobat Pro to save them in 1.5 format
> b) Make your software, which creates the images, use version 1.5.
> 
> Uwe
> 
> Am Di., 13. Okt. 2020 um 11:02 Uhr schrieb Hadi Abed, Khawla <
> 
> Khawla.Hadi-Abed at elekta.com>:
> > Hello Uwe,
> > 
> > Thanks so much for your response..
> > 
> > 
> > 
> > I made all the installation of the Latex and all the necessary packages
> > that I need to run and generate the Pdf file and this is worked, but I
> > still miss many graphs in my document and I received the following errors:
> > 
> > “pdfTeX warning: pdflatex.exe (file ./8073c8x-eps-converted-to.pdf): PDF
> > inclusion: found PDF version <1.7>, but at most version <1.5> allowed
> > 
> > pdfTeX warning: pdflatex.exe (file ./8073c8y-eps-converted-to.pdf): PDF
> > inclusion: found PDF version <1.7>, but at most version <1.5> allowed
> > 
> > pdfTeX warning: pdflatex.exe (file ./8073c8z-eps-converted-to.pdf): PDF
> > inclusion: found PDF version <1.7>, but at most version <1.5> allowed
> > 
> > LaTeX Warning: Float too large for page by 501.51253pt on input line 10”.
> > 
> > 
> > 
> > Could you please let me know how I can correct this error to include my
> > graphs in the generated Pdf document?
> > 
> > Thanks in advance, Khawla
> > 
> > 
> > 
> > Khawla Hadi Abed​
> > ,
> > Medical Physicist, Applied Physics Specialist
> > 
> > Medical Physicist, Senior Physicist
> > Elekta Instrument AB
> > P.O. Box 7593,
> > SE‑103 93
> > Stockholm,
> > Sweden
> > Visiting Address:
> > Kungstensgatan 18
> > Office: *+46 (8) 58725464* <+46%20(8)%2058725464>
> > 
> > | Mobile: *+46 (73) 0922166* <+46%20(73)%200922166>
> > 
> > *Khawla.Hadi-Abed at elekta.com* <Khawla.Hadi-Abed at elekta.com>
> > 
> > *www.elekta.com* <https://www.elekta.com/>
> > Elekta Instrument AB
> > 
> >  Reg No. 556492‑0949
> > 
> > This message is confidential and may be legally privileged or otherwise
> > protected from disclosure. ​If you are not the intended recipient, please
> > telephone or email the sender and delete this message ​and any attachment
> > from your system; you must not copy or disclose the contents of this
> > message ​or any attachment to any other person.
> > Any views expressed in this message are those of the individual sender,
> > except where the sender specifies ​and with authority, states them to be
> > the views of Elekta. Elekta may monitor email traffic data.
> > *From:* Uwe Ziegenhagen <ziegenhagen at gmail.com>
> > *Sent:* den 12 oktober 2020 20:48
> > *To:* Hadi Abed, Khawla <Khawla.Hadi-Abed at elekta.com>
> > *Cc:* support at tug.org
> > *Subject:* Re: Pdflatex
> > 
> > 
> > 
> > Have a look at the PATH variable of your computer. It is very likely that
> > the path to the pdflatex.exe is not included in PATH. Another possibility
> > is that you have not installed LaTeX completely but only the editor
> > (TeXworks). You need to have both, just having TeXworks is not sufficient.
> > 
> > 
> > 
> > Uwe
> > 
> > 
> > 
> > Am Mo., 12. Okt. 2020 um 20:06 Uhr schrieb Hadi Abed, Khawla <
> > Khawla.Hadi-Abed at elekta.com>:
> > 
> > Hello,
> > 
> > It seems that I have a problem with Latex Software (TexWorks) and I can’t
> > generate a pdf document from the Latex terminal or from the Matlab. This
> > program has worked correctly with Windows 7 but not now with Windows 10.
> > From the matlab I got a message that said “pdflatex' is not recognized as
> > an internal or external command, operable program or batch file.”
> > 
> > Actually, I have this file in the same library that I work with, and this
> > is also at the same path folder that matlab seek out the packages to work
> > with. When I tried to open the pdf document from Latex terminal that is
> > also not possible and I received the following comment “Pdflatex is not
> > properly configured”. Could you please let me know what is going on and
> > why the Latex software can’t generate a pdf document?
> > 
> > Thanks in advance,
> > 
> > /Khawla
> > 
> > *Khawla Hadi Abed**​*
> > 
> > ,
> > 
> > Medical Physicist, Applied Physics Specialist
> > 
> > 
> > 
> > Medical Physicist, Senior Physicist
> > 
> > Elekta Instrument AB
> > 
> > P.O. Box 7593,
> > 
> > SE‑103 93
> > 
> > Stockholm,
> > 
> > Sweden
> > 
> > Visiting Address:
> > 
> > Kungstensgatan 18
> > 
> > Office: *+46 (8) 58725464* <+46%20(8)%2058725464>
> > 
> > | Mobile: *+46 (73) 0922166* <+46%20(73)%200922166>
> > 
> > *Khawla.Hadi-Abed at elekta.com* <Khawla.Hadi-Abed at elekta.com>
> > 
> > 
> > 
> > *www.elekta.com* <https://www.elekta.com/>
> > 
> > Elekta Instrument AB
> > 
> >  Reg No. 556492‑0949
> > 
> > This message is confidential and may be legally privileged or otherwise
> > protected from disclosure. ​If you are not the intended recipient, please
> > telephone or email the sender and delete this message ​and any attachment
> > from your system; you must not copy or disclose the contents of this
> > message ​or any attachment to any other person.
> > Any views expressed in this message are those of the individual sender,
> > except where the sender specifies ​and with authority, states them to be
> > the views of Elekta. Elekta may monitor email traffic data.
> > 
> > 
> > 
> > --
> > 
> > Dr. Uwe Ziegenhagen
> > 
> > 0179-7476050
> > <http://www.uweziegenhagen.de>


-- 
The University of Glasgow, charity number SC004401






More information about the texhax mailing list.