# Pdflatex

Mon Oct 19 18:09:14 CEST 2020

Hi Uwe,
Sorry, I’m not really understood your suggestions. How can I make my software to use version 1.5 instead?
Right now, it’s not possible to include my graphs in a correct position that I want/wrote in the Tex program(I have all the graphs, but they are in a wrong position). The graphs avenge in the last two pages in the Pdf document and not in the place that I want them to be. In the main Tex page of my Texworks program I used the following command :
\newpage
\input {Calibrationsprofile.tex}

% and in this “Calibrationsprofile.tex” file I wrote:
\begin{figure}[ht!]
\centering
\includegraphics[width= 0.55\textwidth]{8073calibgraf.eps}
\centering
\caption{Calibration curve.\label{white}}
\end{figure}
These commands are worked in my old pc with Windows 7 but not with Windows 10. Before with Windows 7, All graphs are included  in the correct position but not now. I installed the all necessary packages from MiKTex that I usually used in my old pc, but the graphs are included in wrong place. Could you please help me with this issue?

I tried to use the solution { \pdfminorversion=5 } to solve the issue, but it’s still not work.

Khawla Hadi Abed, Medical Physicist, Applied Physics Specialist | Medical Physicist, Senior Physicist
Elekta Instrument AB
P.O. Box 7593,
SE-103 93 Stockholm, Sweden
Kungstensgatan 18
Office: +46 (8) 58725464 | Mobile: +46 (73) 0922166
Elekta Instrument AB Reg No. 556492-0949
This message is confidential and may be legally privileged or otherwise protected from disclosure. ​If you are not the intended recipient, please telephone or email the sender and delete this message ​and any attachment from your system; you must not copy or disclose the contents of this message ​or any attachment to any other person.
Any views expressed in this message are those of the individual sender, except where the sender specifies ​and with authority, states them to be the views of Elekta. Elekta may monitor email traffic data.
From: Uwe Ziegenhagen <ziegenhagen at gmail.com>
Sent: den 13 oktober 2020 11:28
Cc: support at tug.org
Subject: Re: Pdflatex

Well, you need to convert them to PDF level 1.5.

I have no specific idea how to do so, but two options should work:

a) Use Acrobat Pro to save them in 1.5 format
b) Make your software, which creates the images, use version 1.5.

Uwe

Am Di., 13. Okt. 2020 um 11:02 Uhr schrieb Hadi Abed, Khawla <Khawla.Hadi-Abed at elekta.com<mailto:Khawla.Hadi-Abed at elekta.com>>:
Hello Uwe,

Thanks so much for your response..

I made all the installation of the Latex and all the necessary packages that I need to run and generate the Pdf file and this is worked, but I still miss many graphs in my document and I received the following errors:

“pdfTeX warning: pdflatex.exe (file ./8073c8x-eps-converted-to.pdf): PDF inclusion: found PDF version <1.7>, but at most version <1.5> allowed

pdfTeX warning: pdflatex.exe (file ./8073c8y-eps-converted-to.pdf): PDF inclusion: found PDF version <1.7>, but at most version <1.5> allowed

pdfTeX warning: pdflatex.exe (file ./8073c8z-eps-converted-to.pdf): PDF inclusion: found PDF version <1.7>, but at most version <1.5> allowed

LaTeX Warning: Float too large for page by 501.51253pt on input line 10”.

Could you please let me know how I can correct this error to include my graphs in the generated Pdf document?

,
Medical Physicist, Applied Physics Specialist
|
Medical Physicist, Senior Physicist
Elekta Instrument AB
P.O. Box 7593,
SE‑103 93
Stockholm,
Sweden
Kungstensgatan 18
Office: +46 (8) 58725464<tel:+46%20(8)%2058725464>
| Mobile: +46 (73) 0922166<tel:+46%20(73)%200922166>
|
www.elekta.com<https://www.elekta.com/>
Elekta Instrument AB
Reg No. 556492‑0949
[cid:image001.jpg at 01D6A186.79DA2F40]
This message is confidential and may be legally privileged or otherwise protected from disclosure. ​If you are not the intended recipient, please telephone or email the sender and delete this message ​and any attachment from your system; you must not copy or disclose the contents of this message ​or any attachment to any other person.
Any views expressed in this message are those of the individual sender, except where the sender specifies ​and with authority, states them to be the views of Elekta. Elekta may monitor email traffic data.
From: Uwe Ziegenhagen <ziegenhagen at gmail.com<mailto:ziegenhagen at gmail.com>>
Sent: den 12 oktober 2020 20:48
Cc: support at tug.org<mailto:support at tug.org>
Subject: Re: Pdflatex

Have a look at the PATH variable of your computer. It is very likely that the path to the pdflatex.exe is not included in PATH. Another possibility is that you have not installed LaTeX completely but only the editor (TeXworks). You need to have both, just having TeXworks is not sufficient.

Uwe

Am Mo., 12. Okt. 2020 um 20:06 Uhr schrieb Hadi Abed, Khawla <Khawla.Hadi-Abed at elekta.com<mailto:Khawla.Hadi-Abed at elekta.com>>:
Hello,
It seems that I have a problem with Latex Software (TexWorks) and I can’t generate a pdf document from the Latex terminal or from the Matlab. This program has worked correctly with Windows 7 but not now with Windows 10. From the matlab I got a message that said “pdflatex' is not recognized as an internal or external command, operable program or batch file.”
Actually, I have this file in the same library that I work with, and this is also at the same path folder that matlab seek out the packages to work with. When I tried to open the pdf document from Latex terminal that is also not possible and I received the following comment “Pdflatex is not properly configured”. Could you please let me know what is going on and why the Latex software can’t generate a pdf document?
/Khawla
,
Medical Physicist, Applied Physics Specialist
|
Medical Physicist, Senior Physicist
Elekta Instrument AB
P.O. Box 7593,
SE‑103 93
Stockholm,
Sweden
Kungstensgatan 18
Office: +46 (8) 58725464<tel:+46%20(8)%2058725464>
| Mobile: +46 (73) 0922166<tel:+46%20(73)%200922166>
|
www.elekta.com<https://www.elekta.com/>
Elekta Instrument AB
Reg No. 556492‑0949
[cid:image001.jpg at 01D6A186.79DA2F40]
This message is confidential and may be legally privileged or otherwise protected from disclosure. ​If you are not the intended recipient, please telephone or email the sender and delete this message ​and any attachment from your system; you must not copy or disclose the contents of this message ​or any attachment to any other person.
Any views expressed in this message are those of the individual sender, except where the sender specifies ​and with authority, states them to be the views of Elekta. Elekta may monitor email traffic data.

--
Dr. Uwe Ziegenhagen
0179-7476050
<http://www.uweziegenhagen.de<http://www.uweziegenhagen.de>>

--
Dr. Uwe Ziegenhagen
0179-7476050
<http://www.uweziegenhagen.de<http://www.uweziegenhagen.de>>
-------------- next part --------------
An HTML attachment was scrubbed...
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image001.jpg
Type: image/jpeg
Size: 5184 bytes
Desc: image001.jpg