texlive[64689] Master/texmf-dist: was (12oct22)
commits+karl at tug.org
commits+karl at tug.org
Wed Oct 12 22:13:58 CEST 2022
Revision: 64689
http://tug.org/svn/texlive?view=revision&revision=64689
Author: karl
Date: 2022-10-12 22:13:58 +0200 (Wed, 12 Oct 2022)
Log Message:
-----------
was (12oct22)
Removed Paths:
-------------
trunk/Master/texmf-dist/doc/latex/was/gensymb.pdf
trunk/Master/texmf-dist/source/latex/was/gensymb.dtx
trunk/Master/texmf-dist/source/latex/was/gensymb.ins
trunk/Master/texmf-dist/tex/latex/was/gensymb.sty
Deleted: trunk/Master/texmf-dist/doc/latex/was/gensymb.pdf
===================================================================
(Binary files differ)
Deleted: trunk/Master/texmf-dist/source/latex/was/gensymb.dtx
===================================================================
--- trunk/Master/texmf-dist/source/latex/was/gensymb.dtx 2022-10-12 20:13:36 UTC (rev 64688)
+++ trunk/Master/texmf-dist/source/latex/was/gensymb.dtx 2022-10-12 20:13:58 UTC (rev 64689)
@@ -1,441 +0,0 @@
-%\CheckSum{283}
-%
-% \iffalse
-%
-% File `gensymb.dtx'.
-% Copyright (c) 2003 Walter Schmidt
-%
-% This program may be distributed and/or modified under the
-% conditions of the LaTeX Project Public License, either version 1.2
-% of this license or (at your option) any later version.
-% The latest version of this license is in
-% http://www.latex-project.org/lppl.txt
-% and version 1.2 or later is part of all distributions of LaTeX
-% version 1999/12/01 or later.
-%
-% This program consists of the files gensymb.dtx and gensymb.ins
-%
-% \fi
-%
-% \iffalse
-%
-%<*driver>
-\ProvidesFile{gensymb.drv}
-%</driver>
-%<package>\ProvidesPackage{gensymb}
- [2003/07/02 v1.0 (WaS)]
-%<*driver>
-\documentclass{ltxdoc}
-\OnlyDescription
-\usepackage{textcomp}
-\CodelineNumbered
-\begin{document}
- \DocInput{gensymb.dtx}
-\end{document}
-%</driver>
-% \fi
-%
-% \newcommand\Lopt[1]{\textsf{#1}}
-% \let\Lpack\Lopt
-% \GetFileInfo{gensymb.drv}
-%
-% \title{The \textsf{gensymb} package for \LaTeXe}
-% \author{Walter Schmidt\thanks{{\ttfamily w.a.schmidt at gmx.net}}}
-% \date{(\fileversion{} -- \filedate)}
-% \maketitle
-% \sloppy
-%
-% \section{The problem}
-% Typesetting units of measurement with \LaTeX{} is sometimes difficult.
-% Why? For instance, most (but no all) typefaces have an
-% upright \textmu{} and also a degree symbol, but
-% there is no obvious way to use these in math mode. On the other hand,
-% an upright \textohm{} is part of all math fonts for \TeX,
-% but most text fonts are lacking the corresponding \cmd{\textohm}.
-% Thus, it is not only impossible to use the
-% same notation in text and in formulas;
-% depending on the fonts used, it may even be impossible to
-% typeset units properly at all, if you are restricted to
-% the means of `standard' \LaTeX.
-%
-% \section{The macro package}
-% The \Lpack{gensymb} package provides a number of `generic' macros,
-% which produce the same output in text and math mode:
-% \begin{verse}
-% \begin{tabular}{ccccc}
-% \cmd{\degree} &
-% \cmd{\celsius} &
-% \cmd{\perthousand}&
-% \cmd{\ohm} &
-% \cmd{\micro} \\
-% \textdegree &
-% \textcelsius &
-% \textperthousand &
-% \textohm &
-% \textmu \\
-% \end{tabular}
-% \end{verse}
-% Thus, you can write, for instance:
-% \begin{verse}
-% |$ \lambda = 10.6\,\micro\mathrm{m} $|\\
-% |... a wavelength of 10.6\,\micro m|
-% \end{verse}
-% With the help of the package \Lpack{units}, you can even apply
-% exactly the same notation in text and formulas:
-% \begin{verse}
-% |$ \lambda = \unit[10.6]{\micro m} $|\\
-% |... a wavelength of \unit[10.6]{\micro m}|
-% \end{verse}
-%
-% Under normal circumstances you should use \Lpack{gensymb} in conjunction with
-% the \Lpack{textcomp} package. In this case the above symbols
-% are taken from a text font using the TS1 (text companion)
-% encoding -- even in math.
-% As a result, they will exhibit the style of the surrounding text or of the \cmd{\mathrm}
-% alphabet, respectively.
-%
-% When \Lpack{textcomp} is \emph{not} used (for instance, because your text fonts
-% are not available with TS1 encoding),
-% the \Lpack{gensymb} package tries to emulate the above symbols
-% using what is available in the math fonts.
-% However, the symbols \textmu{} and \textperthousand{} cannot be faked,
-% and the package will issue appropriate warning messages.
-% The option \Lopt{upmu} is a workaround to provide at least the \textmu{} -- see below.
-%
-% The symbol \cmd{\ohm} is particular, too: Loading the \Lpack{textcomp}
-% package does \emph{not ensure} that the text fonts actually include
-% an \textohm. Unfortunately, many fonts don't. \LaTeX{} cannot detect this
-% situation in advance, and the command \cmd{\ohm} will print some garbage
-% then -- possibly without any error message.
-% A workaround is to use the options \Lopt{Omega} or \Lopt{Upomega}
-% described below.
-%
-% The default behavior of the \Lpack{gensymb} package can be modified
-% using the following options:
-% \begin{description}
-% \item[\Lopt{upmu}] With this option, the \cmd{\micro} uses internally
-% a math symbol with the name \cmd{\upmu}.
-% The responsibility to provide this macro lies with you; for instance,
-% load the package \Lpack{upgreek}\footnote{%
-% available from the same CTAN directory as \Lpack{gensymb}} or use a set
-% of math fonts which include an upright mu and make sure it is accessible as \cmd{\upmu}.
-% This option is useful,
-% when your text fonts are not available with TS1 (text companion) encoding,
-% or when their \cmd{\textmu} is ugly or broken. The drawback is,
-% that the style of this \textmu{} will not vary with the surrounding font.
-% It is always upright roman, regardless of whether
-% the surrounding text is sans serif, bold or whatever.
-%
-% \item[\Lopt{Omega}] makes \cmd{\ohm} always use the upright Greek Omega
-% from the current math font, regardless of whether \Lpack{textcomp} is loaded.
-% This makes sense, when there is no \textohm{} in your text font(s).
-% The option works always, but the style of the Omega in text will
-% not vary then.
-%
-% Various packages provide an option \Lopt{slantedGreek} to make
-% uppercase Greek letters in formulas slanted. You may safely use
-% this option in conjunction with the \Lopt{Omega} option of the package
-% \Lpack{gensymb}: \cmd{\ohm} will be upright, though!
-%
-% \addtocounter{footnote}{-1}
-% \item[\Lpack{Upomega}] A math symbol with the name \cmd{\Upomega} will
-% be used to for the \cmd{\ohm}.
-% The responsibility to provide this macro lies with you; for instance,
-% load the package \Lpack{upgreek}\footnotemark.
-% Again, the style of this \cmd{\ohm} in text never changes.
-% The option may be useful, when the text font does not include a \cmd{\textomega}
-% of its own and the mathematical \cmd{\Omega} is not a suitable substitute,
-% for one reason or another.
-% \end{description}
-%
-% \section{Examples}
-% \subsection*{The optimum case}
-% With text fonts providing \textmu{} as well as \textohm{}
-% in the text companion encoding, the default behavior of
-% \Lpack{gensymb} is appropriate.
-% This holds, e.g., for the EC/TC fonts (i.e., Computer Modern with T1
-% and TS1 encoding), Palatino, Lucida Bright, the Fourier fonts,
-% and most font families from MicroPress:
-% \begin{verbatim}
-% \usepackage[T1]{fontenc}
-% \usepackage{textcomp}
-% \usepackage{gensymb}
-% \end{verbatim}
-%
-% \subsection*{The normal case}
-% Many commercial text fonts have a correct `micro' symbol, but no Omega.
-% In this case the package can be loaded with the \Lopt{Omega} option,
-% to make sure that the mathematical Omega is used instead:
-% \begin{verbatim}
-% \usepackage[T1]{fontenc}
-% \usepackage{textcomp}
-% \usepackage{mathptmx} % for instance
-% \usepackage[Omega]{gensymb}
-% \end{verbatim}
-%
-% \subsection*{Using the `classical' CM fonts}
-% When you are restricted to the classical Computer Modern fonts with
-% OT1 encoding, you can still take the Omega from the math fonts,
-% but you need to take the upright mu from an an extra font such as
-% Euler Roman.
-% Notice, however, that \cmd{\perthousand} is not made available.
-% You may try \cmd{\permil} instead, which is provided in the
-% WASY fonts.
-% \begin{verbatim}
-% \usepackage[Euler]{upgreek}
-% \usepackage[Omega, upmu]{gensymb}
-% \usepackage{wasysym}
-% \let\perthousand=\permil
-% \end{verbatim}
-%
-% \subsection*{A special case}
-% Imagine that you are using the Bitstream Charter text fonts
-% in conjunction with Euler-VM for math.\footnote{I do not actually
-% recommend this combination\dots}
-% Charter, like most typefaces from Bitstream, has a wrong mu symbol.
-% The missing Omega could be taken from the math font (Euler), but it would not go well
-% with Charter in a combination such as M$\Omega$.
-% As a workaround, load the \Lpack{upgreek} package
-% and take both \cmd{\micro} and \cmd{\ohm} from the `Adobe Symbol' font:
-% \begin{verbatim}
-% \usepackage[T1]{fontenc}
-% \usepackage{textcomp}
-% \usepackage{charter,eulervm}
-% \usepackage[Symbol]{upgreek}
-% \usepackage[Upomega, upmu]{gensymb}
-% \end{verbatim}
-%
-% \section{Using \Lpack{gensymb} together with other packages}
-% \begin{itemize}
-% \item
-% \Lpack{gensymb} goes well with the package \Lpack{units},
-% but it cannot be used in conjunction with the
-% package \Lpack{SIunits}, because the latter has its own means to typeset
-% prefixes.
-% \item
-% Using the package \Lpack{mathcomp} together with \Lpack{gensymb}
-% is possible, if you need the additional `math companion' symbols.
-% Both packages will use only one common math symbol font.
-% \end{itemize}
-%
-% \section{Known deficiencies}
-% The current version of the package does not work properly
-% in conjunction with the LY1 font encoding.
-% This will possibly be fixed in a future release, if there is an actual need.
-%
-% \StopEventually{}
-%
-% \section{Implementation}
-%
-% The options are implemented using switches:
-% \begin{macrocode}
-%<*package>
-\newif\ifgns at Upomega
-\newif\ifgns at Omega
-\newif\ifgns at upmu
-% \end{macrocode}
-% \begin{macrocode}
-\DeclareOption{Upomega}{\gns at Upomegatrue}
-\DeclareOption{Omega}{\gns at Omegatrue}
-\DeclareOption{upmu}{\gns at upmutrue}
-\ProcessOptions\relax
-% \end{macrocode}
-% These are the generic commands:
-% \begin{macrocode}
-\newcommand\celsius{}
-\newcommand\degree{}
-\newcommand\ohm{}
-% \end{macrocode}
-% The following macros will be used later to actually define the generic commands.
-% We start with a macro to fake \cmd{\degree} and \cmd{\celsius} and to generate
-% a warning message for \cmd{\perthousand}:
-% \begin{macrocode}
-\def\gns at usefakedsymbols{%
-\renewcommand{\degree}{\ensuremath{^\circ}}
-\DeclareRobustCommand{\celsius}{%
- \ifmmode^\circ\mathrm{C}\else$^\circ$C\fi}
-\PackageInfo{gensymb}{%
- Faking symbols for \protect\degree\space and \protect\celsius}
-\PackageWarningNoLine{gensymb}{%
- Not defining \protect\perthousand}
-}
-% \end{macrocode}
-% The following macro sets up a SymbolFont for the text companion symbols to be
-% used in math. If \cmd{\tcmu} is already defined, we assume that the
-% \Lpack{mathcomp} package is already loaded, and that the `math companion'
-% symbols need not be defined once again:
-% \begin{macrocode}
-\def\gns at setupmathcomp{%
-\expandafter\ifx\csname tcmu\endcsname\relax
- \DeclareSymbolFont{gns at font}{TS1}{\familydefault}{m}{n}
- \ifx\mv at bold\@undefined\else
- \SetSymbolFont{gns at font}{bold}{TS1}{\familydefault}{\bfdefault}{n}
- \fi
- \DeclareMathSymbol{\tccelsius}{\mathord}{gns at font}{137} % {'211}
- \DeclareMathSymbol{\tcdegree}{\mathord}{gns at font}{176} % {'260}
- \DeclareMathSymbol{\tcperthousand}{\mathord}{gns at font}{135} % {'207}
- \DeclareMathSymbol{\tcmu}{\mathord}{gns at font}{181} % {'265}
- \DeclareMathSymbol{\tcohm}{\mathord}{gns at font}{87} % {'127}
- \PackageInfo{gensymb}{Math companion symbols declared}
-\else
- \PackageInfo{gensymb}{Math companion symbols found}
-\fi
-}
-% \end{macrocode}
-% A macro to define \cmd{\degree}, \cmd{\celsius} and \cmd{\perthousand}
-% so as to use text companion symbols:
-% \begin{macrocode}
-\def\gns at usetcsymbols{%
-\DeclareRobustCommand{\degree}{%
- \ifmmode\tcdegree\else\textdegree\fi}
-\DeclareRobustCommand{\celsius}{%
- \ifmmode\tccelsius\else\textcelsius\fi}
-\DeclareRobustCommand{\perthousand}{%
- \ifmmode\tcperthousand\else\textperthousand\fi}
-\PackageInfo{gensymb}{Using text companion symbols for %
- \protect\degree, \protect\celsius\space and \protect\perthousand}
-}
-% \end{macrocode}
-% A macro to define \cmd{\ohm} so as to use the math symbol \cmd{\Upomega}:
-% \begin{macrocode}
-\def\gns at useUpomega{%
- \expandafter\ifx\csname Upomega\endcsname\relax
- \PackageError{gensymb}
- {You have requested the option Upomega,\MessageBreak
- but the command \protect\Upomega\space is undefined}
- {Load the upgreek package additionally and try again!}
- \fi
- \DeclareRobustCommand{\ohm}{\ifmmode\Upomega\else$\Upomega$\fi}
- \PackageInfo{gensymb}{Using \protect\Upomega\space for \protect\ohm}
-}
-% \end{macrocode}
-% A macro to define \cmd{\ohm} so as to use \cmd{\Omega} (or \cmd{\upOmega},
-% if it is provided):
-% \begin{macrocode}
-\def\gns at useOmega{%
- \expandafter\ifx\csname upOmega\endcsname\relax
- \DeclareRobustCommand{\ohm}{\ifmmode\Omega\else$\Omega$\fi}
- \PackageInfo{gensymb}{Using \protect\Omega\space for \protect\ohm}
- \else
- \DeclareRobustCommand{\ohm}{\ifmmode\upOmega\else$\upOmega$\fi}
- \PackageInfo{gensymb}{Using \protect\upOmega\space for \protect\ohm}
- \fi
-}
-% \end{macrocode}
-% A macro to define \cmd{\ohm} so as to use the text companion symbol:
-% \begin{macrocode}
-\def\gns at usetextohm{%
- \DeclareRobustCommand{\ohm}{\ifmmode\tcohm\else\textohm\fi}
- \PackageInfo{gensymb}{Using \protect\textohm\space for \protect\ohm}
-}
-% \end{macrocode}
-% A macro to define \cmd{\micro} so as to use the math symbol \cmd{\upmu}:
-% \begin{macrocode}
-\def\gns at useupmu{%
- \expandafter\ifx\csname upmu\endcsname\relax
- \PackageError{gensymb}
- {You have requested the option upmu,\MessageBreak
- but the command \protect\upmu\space is undefined}
- {Load the upgreek package additionally and try again!}
- \fi
- \DeclareRobustCommand{\micro}{\ifmmode\upmu\else$\upmu$\fi}
- \PackageInfo{gensymb}{Using \protect\upmu\space for \protect\micro}
-}
-% \end{macrocode}
-% A macro to define \cmd{\micro} so as to use the text companion symbol:
-% \begin{macrocode}
-\def\gns at usetextmu{%
- \DeclareRobustCommand{\micro}{\ifmmode\tcmu\else\textmu\fi}
- \PackageInfo{gensymb}{Using \protect\textmu\space for \protect\micro}
-}
-% \end{macrocode}
-% A macro to issue a warning, if \cmd{\micro} cannot be made available:
-% \begin{macrocode}
-\def\gns at usenomu{%
- \PackageWarningNoLine{gensymb}{%
- Not defining \protect\micro}
-}
-% \end{macrocode}
-% The actual work is executed AtBeginDocument, so that we can detect the
-% presence of the \Lpack{textcomp} package and the availability of
-% \cmd{\Upmu} and other commands, regardless of the sequence of loading the
-% packages.
-% \begin{macrocode}
-\AtBeginDocument{%
-% \end{macrocode}
-% First, we check for \Lpack{textcomp}. If it is loaded, we set up the
-% text companion symbols for use in math and define \cmd{\degree}, \cmd{\celsius}
-% and \cmd{\perthousand} so that they use these. Otherwise, the symbols are faked
-% as far as possible:
-% \begin{macrocode}
-\@ifpackageloaded{textcomp}{\gns at setupmathcomp\gns at usetcsymbols}%
- {\gns at usefakedsymbols}
-% \end{macrocode}
-% Now we define \cmd{\ohm}. In case the options \Lopt{Upomega}
-% or \Lopt{Omega} have been specified, behave acordingly.
-% Otherwise, use the text companion symbol, if available.
-% Default is to use the mathematical Omega:
-% \begin{macrocode}
-\ifgns at Upomega
- \gns at useUpomega
-\else
-\ifgns at Omega
- \gns at useOmega
-\else
-\@ifpackageloaded{textcomp}%
- {\gns at usetextohm}%
- {\gns at useOmega}
-\fi\fi
-% \end{macrocode}
-% Next, define \cmd{\micro}. In case the option \Lopt{upmu}
-% has been specified, behave acordingly.
-% Otherwise, use the text companion symbol, if available.
-% Default is not to provide \cmd{\micro} at all.
-% \begin{macrocode}
-\ifgns at upmu
- \gns at useupmu
-\else
-\@ifpackageloaded{textcomp}%
- {\gns at usetextmu}%
- {\gns at usenomu}
-\fi
-% \end{macrocode}
-% Finally, we destroy the commands that are no longer needed:
-% \begin{macrocode}
-\let\gns at usefakedsymbols\relax
-\let\gns at setupmathcomp\relax
-\let\gns at usetcsymbols\relax
-\let\gns at useUpomega\relax
-\let\gns at useOmega\relax
-\let\gns at usetextohm\relax
-\let\gns at useupmu\relax
-\let\gns at usenomu\relax
-\let\gns at usetextmu\relax
-% \end{macrocode}
-% \begin{macrocode}
-}
-%</package>
-% \end{macrocode}
-%
-% The next line of code is only to prevent DocStrip from adding the
-% character table to all modules:
-% \begin{macrocode}
-\endinput
-% \end{macrocode}
-% \Finale
-%% \CharacterTable
-%% {Upper-case \A\B\C\D\E\F\G\H\I\J\K\L\M\N\O\P\Q\R\S\T\U\V\W\X\Y\Z
-%% Lower-case \a\b\c\d\e\f\g\h\i\j\k\l\m\n\o\p\q\r\s\t\u\v\w\x\y\z
-%% Digits \0\1\2\3\4\5\6\7\8\9
-%% Exclamation \! Double quote \" Hash (number) \#
-%% Dollar \$ Percent \% Ampersand \&
-%% Acute accent \' Left paren \( Right paren \)
-%% Asterisk \* Plus \+ Comma \,
-%% Minus \- Point \. Solidus \/
-%% Colon \: Semicolon \; Less than \<
-%% Equals \= Greater than \> Question mark \?
-%% Commercial at \@ Left bracket \[ Backslash \\
-%% Right bracket \] Circumflex \^ Underscore \_
-%% Grave accent \` Left brace \{ Vertical bar \|
-%% Right brace \} Tilde \~}
-%%
Deleted: trunk/Master/texmf-dist/source/latex/was/gensymb.ins
===================================================================
--- trunk/Master/texmf-dist/source/latex/was/gensymb.ins 2022-10-12 20:13:36 UTC (rev 64688)
+++ trunk/Master/texmf-dist/source/latex/was/gensymb.ins 2022-10-12 20:13:58 UTC (rev 64689)
@@ -1,8 +0,0 @@
-% file gensymb.ins
-\input docstrip
-\usedir{tex/latex/was}
-
-\generate{\file{gensymb.sty}{\from{gensymb.dtx}{package}}}
-
-\endbatchfile
-
Deleted: trunk/Master/texmf-dist/tex/latex/was/gensymb.sty
===================================================================
--- trunk/Master/texmf-dist/tex/latex/was/gensymb.sty 2022-10-12 20:13:36 UTC (rev 64688)
+++ trunk/Master/texmf-dist/tex/latex/was/gensymb.sty 2022-10-12 20:13:58 UTC (rev 64689)
@@ -1,143 +0,0 @@
-%%
-%% This is file `gensymb.sty',
-%% generated with the docstrip utility.
-%%
-%% The original source files were:
-%%
-%% gensymb.dtx (with options: `package')
-%%
-%% IMPORTANT NOTICE:
-%%
-%% For the copyright see the source file.
-%%
-%% Any modified versions of this file must be renamed
-%% with new filenames distinct from gensymb.sty.
-%%
-%% For distribution of the original source see the terms
-%% for copying and modification in the file gensymb.dtx.
-%%
-%% This generated file may be distributed as long as the
-%% original source files, as listed above, are part of the
-%% same distribution. (The sources need not necessarily be
-%% in the same archive or directory.)
-\ProvidesPackage{gensymb}
- [2003/07/02 v1.0 (WaS)]
-\newif\ifgns at Upomega
-\newif\ifgns at Omega
-\newif\ifgns at upmu
-\DeclareOption{Upomega}{\gns at Upomegatrue}
-\DeclareOption{Omega}{\gns at Omegatrue}
-\DeclareOption{upmu}{\gns at upmutrue}
-\ProcessOptions\relax
-\newcommand\celsius{}
-\newcommand\degree{}
-\newcommand\ohm{}
-\def\gns at usefakedsymbols{%
-\renewcommand{\degree}{\ensuremath{^\circ}}
-\DeclareRobustCommand{\celsius}{%
- \ifmmode^\circ\mathrm{C}\else$^\circ$C\fi}
-\PackageInfo{gensymb}{%
- Faking symbols for \protect\degree\space and \protect\celsius}
-\PackageWarningNoLine{gensymb}{%
- Not defining \protect\perthousand}
-}
-\def\gns at setupmathcomp{%
-\expandafter\ifx\csname tcmu\endcsname\relax
- \DeclareSymbolFont{gns at font}{TS1}{\familydefault}{m}{n}
- \ifx\mv at bold\@undefined\else
- \SetSymbolFont{gns at font}{bold}{TS1}{\familydefault}{\bfdefault}{n}
- \fi
- \DeclareMathSymbol{\tccelsius}{\mathord}{gns at font}{137} % {'211}
- \DeclareMathSymbol{\tcdegree}{\mathord}{gns at font}{176} % {'260}
- \DeclareMathSymbol{\tcperthousand}{\mathord}{gns at font}{135} % {'207}
- \DeclareMathSymbol{\tcmu}{\mathord}{gns at font}{181} % {'265}
- \DeclareMathSymbol{\tcohm}{\mathord}{gns at font}{87} % {'127}
- \PackageInfo{gensymb}{Math companion symbols declared}
-\else
- \PackageInfo{gensymb}{Math companion symbols found}
-\fi
-}
-\def\gns at usetcsymbols{%
-\DeclareRobustCommand{\degree}{%
- \ifmmode\tcdegree\else\textdegree\fi}
-\DeclareRobustCommand{\celsius}{%
- \ifmmode\tccelsius\else\textcelsius\fi}
-\DeclareRobustCommand{\perthousand}{%
- \ifmmode\tcperthousand\else\textperthousand\fi}
-\PackageInfo{gensymb}{Using text companion symbols for %
- \protect\degree, \protect\celsius\space and \protect\perthousand}
-}
-\def\gns at useUpomega{%
- \expandafter\ifx\csname Upomega\endcsname\relax
- \PackageError{gensymb}
- {You have requested the option Upomega,\MessageBreak
- but the command \protect\Upomega\space is undefined}
- {Load the upgreek package additionally and try again!}
- \fi
- \DeclareRobustCommand{\ohm}{\ifmmode\Upomega\else$\Upomega$\fi}
- \PackageInfo{gensymb}{Using \protect\Upomega\space for \protect\ohm}
-}
-\def\gns at useOmega{%
- \expandafter\ifx\csname upOmega\endcsname\relax
- \DeclareRobustCommand{\ohm}{\ifmmode\Omega\else$\Omega$\fi}
- \PackageInfo{gensymb}{Using \protect\Omega\space for \protect\ohm}
- \else
- \DeclareRobustCommand{\ohm}{\ifmmode\upOmega\else$\upOmega$\fi}
- \PackageInfo{gensymb}{Using \protect\upOmega\space for \protect\ohm}
- \fi
-}
-\def\gns at usetextohm{%
- \DeclareRobustCommand{\ohm}{\ifmmode\tcohm\else\textohm\fi}
- \PackageInfo{gensymb}{Using \protect\textohm\space for \protect\ohm}
-}
-\def\gns at useupmu{%
- \expandafter\ifx\csname upmu\endcsname\relax
- \PackageError{gensymb}
- {You have requested the option upmu,\MessageBreak
- but the command \protect\upmu\space is undefined}
- {Load the upgreek package additionally and try again!}
- \fi
- \DeclareRobustCommand{\micro}{\ifmmode\upmu\else$\upmu$\fi}
- \PackageInfo{gensymb}{Using \protect\upmu\space for \protect\micro}
-}
-\def\gns at usetextmu{%
- \DeclareRobustCommand{\micro}{\ifmmode\tcmu\else\textmu\fi}
- \PackageInfo{gensymb}{Using \protect\textmu\space for \protect\micro}
-}
-\def\gns at usenomu{%
- \PackageWarningNoLine{gensymb}{%
- Not defining \protect\micro}
-}
-\AtBeginDocument{%
-\@ifpackageloaded{textcomp}{\gns at setupmathcomp\gns at usetcsymbols}%
- {\gns at usefakedsymbols}
-\ifgns at Upomega
- \gns at useUpomega
-\else
-\ifgns at Omega
- \gns at useOmega
-\else
-\@ifpackageloaded{textcomp}%
- {\gns at usetextohm}%
- {\gns at useOmega}
-\fi\fi
-\ifgns at upmu
- \gns at useupmu
-\else
-\@ifpackageloaded{textcomp}%
- {\gns at usetextmu}%
- {\gns at usenomu}
-\fi
-\let\gns at usefakedsymbols\relax
-\let\gns at setupmathcomp\relax
-\let\gns at usetcsymbols\relax
-\let\gns at useUpomega\relax
-\let\gns at useOmega\relax
-\let\gns at usetextohm\relax
-\let\gns at useupmu\relax
-\let\gns at usenomu\relax
-\let\gns at usetextmu\relax
-}
-\endinput
-%%
-%% End of file `gensymb.sty'.
More information about the tex-live-commits
mailing list.