texlive[64688] Master: gensymb (12oct22)

commits+karl at tug.org commits+karl at tug.org
Wed Oct 12 22:13:36 CEST 2022


Revision: 64688
          http://tug.org/svn/texlive?view=revision&revision=64688
Author:   karl
Date:     2022-10-12 22:13:36 +0200 (Wed, 12 Oct 2022)
Log Message:
-----------
gensymb (12oct22)

Modified Paths:
--------------
    trunk/Master/tlpkg/bin/tlpkg-ctan-check
    trunk/Master/tlpkg/tlpsrc/collection-latexextra.tlpsrc

Added Paths:
-----------
    trunk/Master/texmf-dist/doc/latex/gensymb/
    trunk/Master/texmf-dist/doc/latex/gensymb/LICENSE
    trunk/Master/texmf-dist/doc/latex/gensymb/README
    trunk/Master/texmf-dist/doc/latex/gensymb/gensymb.pdf
    trunk/Master/texmf-dist/source/latex/gensymb/
    trunk/Master/texmf-dist/source/latex/gensymb/gensymb.dtx
    trunk/Master/texmf-dist/source/latex/gensymb/gensymb.ins
    trunk/Master/texmf-dist/tex/latex/gensymb/
    trunk/Master/texmf-dist/tex/latex/gensymb/gensymb.sty
    trunk/Master/tlpkg/tlpsrc/gensymb.tlpsrc

Added: trunk/Master/texmf-dist/doc/latex/gensymb/LICENSE
===================================================================
--- trunk/Master/texmf-dist/doc/latex/gensymb/LICENSE	                        (rev 0)
+++ trunk/Master/texmf-dist/doc/latex/gensymb/LICENSE	2022-10-12 20:13:36 UTC (rev 64688)
@@ -0,0 +1,416 @@
+The LaTeX Project Public License
+=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
+
+LPPL Version 1.3c  2008-05-04
+
+Copyright 1999 2002-2008 LaTeX3 Project
+    Everyone is allowed to distribute verbatim copies of this
+    license document, but modification of it is not allowed.
+
+
+PREAMBLE
+========
+
+The LaTeX Project Public License (LPPL) is the primary license under
+which the LaTeX kernel and the base LaTeX packages are distributed.
+
+You may use this license for any work of which you hold the copyright
+and which you wish to distribute.  This license may be particularly
+suitable if your work is TeX-related (such as a LaTeX package), but 
+it is written in such a way that you can use it even if your work is 
+unrelated to TeX.
+
+The section `WHETHER AND HOW TO DISTRIBUTE WORKS UNDER THIS LICENSE',
+below, gives instructions, examples, and recommendations for authors
+who are considering distributing their works under this license.
+
+This license gives conditions under which a work may be distributed
+and modified, as well as conditions under which modified versions of
+that work may be distributed.
+
+We, the LaTeX3 Project, believe that the conditions below give you
+the freedom to make and distribute modified versions of your work
+that conform with whatever technical specifications you wish while
+maintaining the availability, integrity, and reliability of
+that work.  If you do not see how to achieve your goal while
+meeting these conditions, then read the document `cfgguide.tex'
+and `modguide.tex' in the base LaTeX distribution for suggestions.
+
+
+DEFINITIONS
+===========
+
+In this license document the following terms are used:
+
+   `Work'
+    Any work being distributed under this License.
+    
+   `Derived Work'
+    Any work that under any applicable law is derived from the Work.
+
+   `Modification' 
+    Any procedure that produces a Derived Work under any applicable
+    law -- for example, the production of a file containing an
+    original file associated with the Work or a significant portion of
+    such a file, either verbatim or with modifications and/or
+    translated into another language.
+
+   `Modify'
+    To apply any procedure that produces a Derived Work under any
+    applicable law.
+    
+   `Distribution'
+    Making copies of the Work available from one person to another, in
+    whole or in part.  Distribution includes (but is not limited to)
+    making any electronic components of the Work accessible by
+    file transfer protocols such as FTP or HTTP or by shared file
+    systems such as Sun's Network File System (NFS).
+
+   `Compiled Work'
+    A version of the Work that has been processed into a form where it
+    is directly usable on a computer system.  This processing may
+    include using installation facilities provided by the Work,
+    transformations of the Work, copying of components of the Work, or
+    other activities.  Note that modification of any installation
+    facilities provided by the Work constitutes modification of the Work.
+
+   `Current Maintainer'
+    A person or persons nominated as such within the Work.  If there is
+    no such explicit nomination then it is the `Copyright Holder' under
+    any applicable law.
+
+   `Base Interpreter' 
+    A program or process that is normally needed for running or
+    interpreting a part or the whole of the Work.    
+
+    A Base Interpreter may depend on external components but these
+    are not considered part of the Base Interpreter provided that each
+    external component clearly identifies itself whenever it is used
+    interactively.  Unless explicitly specified when applying the
+    license to the Work, the only applicable Base Interpreter is a
+    `LaTeX-Format' or in the case of files belonging to the 
+    `LaTeX-format' a program implementing the `TeX language'.
+
+
+
+CONDITIONS ON DISTRIBUTION AND MODIFICATION
+===========================================
+
+1.  Activities other than distribution and/or modification of the Work
+are not covered by this license; they are outside its scope.  In
+particular, the act of running the Work is not restricted and no
+requirements are made concerning any offers of support for the Work.
+
+2.  You may distribute a complete, unmodified copy of the Work as you
+received it.  Distribution of only part of the Work is considered
+modification of the Work, and no right to distribute such a Derived
+Work may be assumed under the terms of this clause.
+
+3.  You may distribute a Compiled Work that has been generated from a
+complete, unmodified copy of the Work as distributed under Clause 2
+above, as long as that Compiled Work is distributed in such a way that
+the recipients may install the Compiled Work on their system exactly
+as it would have been installed if they generated a Compiled Work
+directly from the Work.
+
+4.  If you are the Current Maintainer of the Work, you may, without
+restriction, modify the Work, thus creating a Derived Work.  You may
+also distribute the Derived Work without restriction, including
+Compiled Works generated from the Derived Work.  Derived Works
+distributed in this manner by the Current Maintainer are considered to
+be updated versions of the Work.
+
+5.  If you are not the Current Maintainer of the Work, you may modify
+your copy of the Work, thus creating a Derived Work based on the Work,
+and compile this Derived Work, thus creating a Compiled Work based on
+the Derived Work.
+
+6.  If you are not the Current Maintainer of the Work, you may
+distribute a Derived Work provided the following conditions are met
+for every component of the Work unless that component clearly states
+in the copyright notice that it is exempt from that condition.  Only
+the Current Maintainer is allowed to add such statements of exemption 
+to a component of the Work. 
+
+  a. If a component of this Derived Work can be a direct replacement
+     for a component of the Work when that component is used with the
+     Base Interpreter, then, wherever this component of the Work
+     identifies itself to the user when used interactively with that
+     Base Interpreter, the replacement component of this Derived Work
+     clearly and unambiguously identifies itself as a modified version
+     of this component to the user when used interactively with that
+     Base Interpreter.
+     
+  b. Every component of the Derived Work contains prominent notices
+     detailing the nature of the changes to that component, or a
+     prominent reference to another file that is distributed as part
+     of the Derived Work and that contains a complete and accurate log
+     of the changes.
+  
+  c. No information in the Derived Work implies that any persons,
+     including (but not limited to) the authors of the original version
+     of the Work, provide any support, including (but not limited to)
+     the reporting and handling of errors, to recipients of the
+     Derived Work unless those persons have stated explicitly that
+     they do provide such support for the Derived Work.
+
+  d. You distribute at least one of the following with the Derived Work:
+
+       1. A complete, unmodified copy of the Work; 
+          if your distribution of a modified component is made by
+          offering access to copy the modified component from a
+          designated place, then offering equivalent access to copy
+          the Work from the same or some similar place meets this
+          condition, even though third parties are not compelled to
+          copy the Work along with the modified component;
+
+       2. Information that is sufficient to obtain a complete,
+          unmodified copy of the Work.
+
+7.  If you are not the Current Maintainer of the Work, you may
+distribute a Compiled Work generated from a Derived Work, as long as
+the Derived Work is distributed to all recipients of the Compiled
+Work, and as long as the conditions of Clause 6, above, are met with
+regard to the Derived Work.
+
+8.  The conditions above are not intended to prohibit, and hence do not
+apply to, the modification, by any method, of any component so that it
+becomes identical to an updated version of that component of the Work as
+it is distributed by the Current Maintainer under Clause 4, above.
+
+9.  Distribution of the Work or any Derived Work in an alternative
+format, where the Work or that Derived Work (in whole or in part) is
+then produced by applying some process to that format, does not relax or
+nullify any sections of this license as they pertain to the results of
+applying that process.
+     
+10. a. A Derived Work may be distributed under a different license
+       provided that license itself honors the conditions listed in
+       Clause 6 above, in regard to the Work, though it does not have
+       to honor the rest of the conditions in this license.
+      
+    b. If a Derived Work is distributed under a different license, that
+       Derived Work must provide sufficient documentation as part of
+       itself to allow each recipient of that Derived Work to honor the 
+       restrictions in Clause 6 above, concerning changes from the Work.
+
+11. This license places no restrictions on works that are unrelated to
+the Work, nor does this license place any restrictions on aggregating
+such works with the Work by any means.
+
+12.  Nothing in this license is intended to, or may be used to, prevent
+complete compliance by all parties with all applicable laws.
+
+
+NO WARRANTY
+===========
+
+There is no warranty for the Work.  Except when otherwise stated in
+writing, the Copyright Holder provides the Work `as is', without
+warranty of any kind, either expressed or implied, including, but not
+limited to, the implied warranties of merchantability and fitness for a
+particular purpose.  The entire risk as to the quality and performance
+of the Work is with you.  Should the Work prove defective, you assume
+the cost of all necessary servicing, repair, or correction.
+
+In no event unless required by applicable law or agreed to in writing
+will The Copyright Holder, or any author named in the components of the
+Work, or any other party who may distribute and/or modify the Work as
+permitted above, be liable to you for damages, including any general,
+special, incidental or consequential damages arising out of any use of
+the Work or out of inability to use the Work (including, but not limited
+to, loss of data, data being rendered inaccurate, or losses sustained by
+anyone as a result of any failure of the Work to operate with any other
+programs), even if the Copyright Holder or said author or said other
+party has been advised of the possibility of such damages.
+
+
+MAINTENANCE OF THE WORK
+=======================
+
+The Work has the status `author-maintained' if the Copyright Holder
+explicitly and prominently states near the primary copyright notice in
+the Work that the Work can only be maintained by the Copyright Holder
+or simply that it is `author-maintained'.
+
+The Work has the status `maintained' if there is a Current Maintainer
+who has indicated in the Work that they are willing to receive error
+reports for the Work (for example, by supplying a valid e-mail
+address). It is not required for the Current Maintainer to acknowledge
+or act upon these error reports.
+
+The Work changes from status `maintained' to `unmaintained' if there
+is no Current Maintainer, or the person stated to be Current
+Maintainer of the work cannot be reached through the indicated means
+of communication for a period of six months, and there are no other
+significant signs of active maintenance.
+
+You can become the Current Maintainer of the Work by agreement with
+any existing Current Maintainer to take over this role.
+
+If the Work is unmaintained, you can become the Current Maintainer of
+the Work through the following steps:
+
+ 1.  Make a reasonable attempt to trace the Current Maintainer (and
+     the Copyright Holder, if the two differ) through the means of
+     an Internet or similar search.
+
+ 2.  If this search is successful, then enquire whether the Work
+     is still maintained.
+
+  a. If it is being maintained, then ask the Current Maintainer
+     to update their communication data within one month.
+     
+  b. If the search is unsuccessful or no action to resume active
+     maintenance is taken by the Current Maintainer, then announce
+     within the pertinent community your intention to take over
+     maintenance.  (If the Work is a LaTeX work, this could be
+     done, for example, by posting to comp.text.tex.)
+
+ 3a. If the Current Maintainer is reachable and agrees to pass
+     maintenance of the Work to you, then this takes effect
+     immediately upon announcement.
+     
+  b. If the Current Maintainer is not reachable and the Copyright
+     Holder agrees that maintenance of the Work be passed to you,
+     then this takes effect immediately upon announcement.  
+    
+ 4.  If you make an `intention announcement' as described in 2b. above
+     and after three months your intention is challenged neither by
+     the Current Maintainer nor by the Copyright Holder nor by other
+     people, then you may arrange for the Work to be changed so as
+     to name you as the (new) Current Maintainer.
+     
+ 5.  If the previously unreachable Current Maintainer becomes
+     reachable once more within three months of a change completed
+     under the terms of 3b) or 4), then that Current Maintainer must
+     become or remain the Current Maintainer upon request provided
+     they then update their communication data within one month.
+
+A change in the Current Maintainer does not, of itself, alter the fact
+that the Work is distributed under the LPPL license.
+
+If you become the Current Maintainer of the Work, you should
+immediately provide, within the Work, a prominent and unambiguous
+statement of your status as Current Maintainer.  You should also
+announce your new status to the same pertinent community as
+in 2b) above.
+
+
+WHETHER AND HOW TO DISTRIBUTE WORKS UNDER THIS LICENSE
+======================================================
+
+This section contains important instructions, examples, and
+recommendations for authors who are considering distributing their
+works under this license.  These authors are addressed as `you' in
+this section.
+
+Choosing This License or Another License
+----------------------------------------
+
+If for any part of your work you want or need to use *distribution*
+conditions that differ significantly from those in this license, then
+do not refer to this license anywhere in your work but, instead,
+distribute your work under a different license.  You may use the text
+of this license as a model for your own license, but your license
+should not refer to the LPPL or otherwise give the impression that
+your work is distributed under the LPPL.
+
+The document `modguide.tex' in the base LaTeX distribution explains
+the motivation behind the conditions of this license.  It explains,
+for example, why distributing LaTeX under the GNU General Public
+License (GPL) was considered inappropriate.  Even if your work is
+unrelated to LaTeX, the discussion in `modguide.tex' may still be
+relevant, and authors intending to distribute their works under any
+license are encouraged to read it.
+
+A Recommendation on Modification Without Distribution
+-----------------------------------------------------
+
+It is wise never to modify a component of the Work, even for your own
+personal use, without also meeting the above conditions for
+distributing the modified component.  While you might intend that such
+modifications will never be distributed, often this will happen by
+accident -- you may forget that you have modified that component; or
+it may not occur to you when allowing others to access the modified
+version that you are thus distributing it and violating the conditions
+of this license in ways that could have legal implications and, worse,
+cause problems for the community.  It is therefore usually in your
+best interest to keep your copy of the Work identical with the public
+one.  Many works provide ways to control the behavior of that work
+without altering any of its licensed components.
+
+How to Use This License
+-----------------------
+
+To use this license, place in each of the components of your work both
+an explicit copyright notice including your name and the year the work
+was authored and/or last substantially modified.  Include also a
+statement that the distribution and/or modification of that
+component is constrained by the conditions in this license.
+
+Here is an example of such a notice and statement:
+
+  %% pig.dtx
+  %% Copyright 2005 M. Y. Name
+  %
+  % This work may be distributed and/or modified under the
+  % conditions of the LaTeX Project Public License, either version 1.3
+  % of this license or (at your option) any later version.
+  % The latest version of this license is in
+  %   http://www.latex-project.org/lppl.txt
+  % and version 1.3 or later is part of all distributions of LaTeX
+  % version 2005/12/01 or later.
+  %
+  % This work has the LPPL maintenance status `maintained'.
+  % 
+  % The Current Maintainer of this work is M. Y. Name.
+  %
+  % This work consists of the files pig.dtx and pig.ins
+  % and the derived file pig.sty.
+
+Given such a notice and statement in a file, the conditions
+given in this license document would apply, with the `Work' referring
+to the three files `pig.dtx', `pig.ins', and `pig.sty' (the last being
+generated from `pig.dtx' using `pig.ins'), the `Base Interpreter'
+referring to any `LaTeX-Format', and both `Copyright Holder' and
+`Current Maintainer' referring to the person `M. Y. Name'.
+
+If you do not want the Maintenance section of LPPL to apply to your
+Work, change `maintained' above into `author-maintained'.  
+However, we recommend that you use `maintained', as the Maintenance
+section was added in order to ensure that your Work remains useful to
+the community even when you can no longer maintain and support it
+yourself.
+
+Derived Works That Are Not Replacements
+---------------------------------------
+
+Several clauses of the LPPL specify means to provide reliability and
+stability for the user community. They therefore concern themselves
+with the case that a Derived Work is intended to be used as a
+(compatible or incompatible) replacement of the original Work. If
+this is not the case (e.g., if a few lines of code are reused for a
+completely different task), then clauses 6b and 6d shall not apply.
+
+
+Important Recommendations
+-------------------------
+
+ Defining What Constitutes the Work
+
+   The LPPL requires that distributions of the Work contain all the
+   files of the Work.  It is therefore important that you provide a
+   way for the licensee to determine which files constitute the Work.
+   This could, for example, be achieved by explicitly listing all the
+   files of the Work near the copyright notice of each file or by
+   using a line such as:
+
+    % This work consists of all files listed in manifest.txt.
+   
+   in that place.  In the absence of an unequivocal list it might be
+   impossible for the licensee to determine what is considered by you
+   to comprise the Work and, in such a case, the licensee would be
+   entitled to make reasonable conjectures as to which files comprise
+   the Work.
+

Added: trunk/Master/texmf-dist/doc/latex/gensymb/README
===================================================================
--- trunk/Master/texmf-dist/doc/latex/gensymb/README	                        (rev 0)
+++ trunk/Master/texmf-dist/doc/latex/gensymb/README	2022-10-12 20:13:36 UTC (rev 64688)
@@ -0,0 +1,30 @@
+============================================================
+
+   gensymb – Generic symbols for both text and math mode
+
+============================================================
+Walter Schmidt
+
+Keiran  Harcombe
+kjh at harcombe.net
+  
+This LaTeX package provides generic commands
+\degree, \celsius, \perthousand, \micro and \ohm, which
+work both in text and math mode.  The package should
+co-operate flawlessly with the well-known units.sty.
+Various means are provided to fake the symbols or take
+them from external symbol fonts, if they are not available
+in the default fonts used in the document.  The package
+makes optionally use of upgreek.sty.
+
+The style files can be unpacked by running the particular
+installation script (.ins) through LaTeX.  The files will 
+be created immediately in the appropriate TDS directory
+tex/latex/was, if this directory exists and the DOCSTRIP
+tool is properly configured -- otherwise they are written
+into the current directory.
+
+The documentation of a package can be generated by running
+the particular .dtx file through LaTeX.
+
+==finis


Property changes on: trunk/Master/texmf-dist/doc/latex/gensymb/README
___________________________________________________________________
Added: svn:eol-style
## -0,0 +1 ##
+native
\ No newline at end of property
Added: trunk/Master/texmf-dist/doc/latex/gensymb/gensymb.pdf
===================================================================
(Binary files differ)

Index: trunk/Master/texmf-dist/doc/latex/gensymb/gensymb.pdf
===================================================================
--- trunk/Master/texmf-dist/doc/latex/gensymb/gensymb.pdf	2022-10-12 20:11:55 UTC (rev 64687)
+++ trunk/Master/texmf-dist/doc/latex/gensymb/gensymb.pdf	2022-10-12 20:13:36 UTC (rev 64688)

Property changes on: trunk/Master/texmf-dist/doc/latex/gensymb/gensymb.pdf
___________________________________________________________________
Added: svn:mime-type
## -0,0 +1 ##
+application/pdf
\ No newline at end of property
Added: trunk/Master/texmf-dist/source/latex/gensymb/gensymb.dtx
===================================================================
--- trunk/Master/texmf-dist/source/latex/gensymb/gensymb.dtx	                        (rev 0)
+++ trunk/Master/texmf-dist/source/latex/gensymb/gensymb.dtx	2022-10-12 20:13:36 UTC (rev 64688)
@@ -0,0 +1,446 @@
+%\CheckSum{283}
+%
+% \iffalse
+%
+%% gensymb.dtx
+% Copyright (c) 2005--2022 Walter Schmidt
+% Copyright (c) 2022-- Keiran Harcombe 
+%
+% This work may be distributed and/or modified under the
+% conditions of the LaTeX Project Public License, either version 1.3
+% of this license or (at your option) any later version.
+% The latest version of this license is in
+%   http://www.latex-project.org/lppl.txt
+% and version 1.3 or later is part of all distributions of LaTeX
+% version 2005/12/01 or later.
+%
+% This work has the LPPL maintenance status `maintained'.
+% 
+% The Current Maintainer of this work is Keiran Harcombe
+%
+% This work consists of the files gensymb.dtx, gensymb.ins
+% and the derived file gensymb.sty.%
+% \fi
+%
+% \iffalse
+%
+%<*driver>
+\ProvidesFile{gensymb.drv}
+%</driver>
+%<package>\ProvidesPackage{gensymb}
+  [2022/10 v1.0.1 (KJH)]
+%<*driver>
+\documentclass{ltxdoc}
+\OnlyDescription
+\usepackage{textcomp}
+\CodelineNumbered
+\begin{document}
+ \DocInput{gensymb.dtx}
+\end{document}
+%</driver>
+% \fi
+%
+% \newcommand\Lopt[1]{\textsf{#1}}
+% \let\Lpack\Lopt
+% \GetFileInfo{gensymb.drv}
+%
+% \title{The \textsf{gensymb} package for \LaTeXe}
+% \author{Walter Schmidt & Keiran Harcombe\thanks{{\ttfamily kjh at harcombe.net}}}
+% \date{(\fileversion{} -- \filedate)}
+% \maketitle
+% \sloppy
+%
+% \section{The problem}
+% Typesetting units of measurement with \LaTeX{} is sometimes difficult.
+% Why?  For instance, most (but no all) typefaces have an 
+% upright \textmu{} and also a degree symbol, but
+% there is no obvious way to use these in math mode.  On the other hand,
+% an upright \textohm{} is part of all math fonts for \TeX,
+% but most text fonts are lacking the corresponding \cmd{\textohm}.  
+% Thus, it is not only impossible to use the
+% same notation in text and in formulas;
+% depending on the fonts used, it may even be impossible to
+% typeset units properly at all, if you are restricted to 
+% the means of `standard' \LaTeX.
+%
+% \section{The macro package}
+% The \Lpack{gensymb} package provides a number of `generic' macros,
+% which produce the same output in text and math mode:
+% \begin{verse}
+% \begin{tabular}{ccccc}
+%   \cmd{\degree}     &    
+%   \cmd{\celsius}    &    
+%   \cmd{\perthousand}& 
+%   \cmd{\ohm}        &
+%   \cmd{\micro}      \\
+%   \textdegree       &
+%   \textcelsius      &
+%   \textperthousand  &
+%   \textohm          &
+%   \textmu          \\           
+% \end{tabular}
+% \end{verse}
+% Thus, you can write, for instance:
+% \begin{verse}
+% |$ \lambda = 10.6\,\micro\mathrm{m} $|\\
+% |... a wavelength of 10.6\,\micro m|
+% \end{verse}
+% With the help of the package \Lpack{units}, you can even apply 
+% exactly the same notation in text and formulas:
+% \begin{verse}
+% |$ \lambda = \unit[10.6]{\micro m} $|\\
+% |... a wavelength of \unit[10.6]{\micro m}|
+% \end{verse}
+%
+% Under normal circumstances  you should use \Lpack{gensymb} in conjunction with
+% the \Lpack{textcomp} package.  In this case the above symbols
+% are taken from a text font using the  TS1 (text companion) 
+% encoding -- even in math. 
+% As a result, they will exhibit the style of the surrounding text or of the \cmd{\mathrm}
+% alphabet, respectively.
+%
+% When \Lpack{textcomp} is \emph{not} used (for instance, because your text fonts 
+% are not available with TS1 encoding), 
+% the \Lpack{gensymb} package tries to emulate the above symbols
+% using what is available in the math fonts.   
+% However, the symbols \textmu{} and \textperthousand{} cannot be faked,
+% and the package will issue appropriate warning messages.  
+% The option \Lopt{upmu} is a workaround to provide at least the \textmu{} -- see below.
+% 
+% The symbol \cmd{\ohm} is particular, too:  Loading the \Lpack{textcomp}
+% package does \emph{not ensure} that the text fonts actually include
+% an \textohm.  Unfortunately, many fonts don't.  \LaTeX{} cannot detect this
+% situation in advance, and the command \cmd{\ohm} will print some garbage
+% then -- possibly without any error message.
+% A workaround is to use the options \Lopt{Omega} or \Lopt{Upomega}
+% described below.  
+%
+% The default behavior of the \Lpack{gensymb} package can be modified
+% using the following options:
+% \begin{description} 
+% \item[\Lopt{upmu}] With this option, the \cmd{\micro} uses internally 
+% a math symbol with the name \cmd{\upmu}.
+% The responsibility to provide this macro lies with you; for instance,
+% load the package \Lpack{upgreek}\footnote{%
+% available from the same CTAN directory as \Lpack{gensymb}} or use a set
+% of math fonts which include an upright mu and make sure it is accessible as \cmd{\upmu}.
+% This option is useful, 
+% when your text fonts are not available with TS1 (text companion) encoding, 
+% or when their \cmd{\textmu} is  ugly or broken.  The drawback is, 
+% that the style of this \textmu{} will not vary with the surrounding font.
+% It is always upright  roman, regardless of whether 
+% the surrounding text is  sans serif, bold or whatever.
+%
+% \item[\Lopt{Omega}] makes \cmd{\ohm} always use the upright Greek Omega
+% from the current math font, regardless of whether \Lpack{textcomp} is loaded.
+% This makes sense, when there is no \textohm{} in your text font(s).
+% The option works always, but the style of the  Omega in text will
+% not vary then.
+%
+% Various packages provide an option \Lopt{slantedGreek} to make
+% uppercase Greek letters in formulas slanted.  You may safely use 
+% this option in conjunction with the \Lopt{Omega} option of the package
+% \Lpack{gensymb}: \cmd{\ohm} will be upright, though!
+% 
+% \addtocounter{footnote}{-1}
+% \item[\Lpack{Upomega}] A math symbol with the name \cmd{\Upomega} will
+% be used to for the \cmd{\ohm}.
+% The responsibility to provide this macro lies with you; for instance,
+% load the package \Lpack{upgreek}\footnotemark.
+% Again, the style of this \cmd{\ohm} in text never changes.  
+% The option may be useful, when the text font does not include a \cmd{\textomega}
+% of its own and the mathematical \cmd{\Omega} is not a suitable substitute,
+% for one reason or another.
+% \end{description}
+% 
+% \section{Examples}
+% \subsection*{The optimum case}
+% With text fonts providing \textmu{} as well as \textohm{}
+% in the text companion encoding, the default behavior of 
+% \Lpack{gensymb} is appropriate.
+% This holds, e.g., for the EC/TC fonts (i.e., Computer Modern with T1 
+% and TS1 encoding), Palatino, Lucida Bright, the Fourier fonts, 
+% and most font families from MicroPress:
+% \begin{verbatim}
+% \usepackage[T1]{fontenc}
+% \usepackage{textcomp}
+% \usepackage{gensymb}
+% \end{verbatim}
+%
+% \subsection*{The normal case}
+% Many commercial text fonts have a correct `micro' symbol, but no Omega.
+% In this case the package can be loaded with the \Lopt{Omega} option,
+% to make sure that the mathematical Omega is used instead:
+% \begin{verbatim}
+% \usepackage[T1]{fontenc}
+% \usepackage{textcomp}
+% \usepackage{mathptmx} % for instance
+% \usepackage[Omega]{gensymb}
+% \end{verbatim}
+% 
+% \subsection*{Using the `classical' CM fonts}
+% When you are restricted to the classical Computer Modern fonts with
+% OT1 encoding, you can still take the Omega from the math fonts,
+% but you need to take the upright mu from an an extra font such as
+% Euler Roman.
+% Notice, however, that \cmd{\perthousand} is not made available.
+% You may try \cmd{\permil} instead, which is provided in the
+% WASY fonts.
+% \begin{verbatim}
+% \usepackage[Euler]{upgreek}
+% \usepackage[Omega, upmu]{gensymb}
+% \usepackage{wasysym}
+% \let\perthousand=\permil
+% \end{verbatim}
+%
+% \subsection*{A special case}
+% Imagine that you are using the Bitstream Charter text fonts 
+% in conjunction with Euler-VM for math.\footnote{I do not actually
+% recommend this combination\dots}
+% Charter, like most typefaces from Bitstream, has a wrong mu symbol.
+% The missing Omega could be taken from the math font (Euler), but it would not go well 
+% with  Charter  in a combination such as M$\Omega$.
+% As a workaround, load the \Lpack{upgreek} package 
+% and take both \cmd{\micro} and \cmd{\ohm} from the `Adobe Symbol' font:
+% \begin{verbatim}
+% \usepackage[T1]{fontenc}
+% \usepackage{textcomp}
+% \usepackage{charter,eulervm}
+% \usepackage[Symbol]{upgreek}
+% \usepackage[Upomega, upmu]{gensymb}
+% \end{verbatim}
+%
+% \section{Using \Lpack{gensymb} together with other packages}
+% \begin{itemize}
+% \item
+% \Lpack{gensymb} goes well with the package \Lpack{units},
+% but it cannot be used in conjunction with the
+% package \Lpack{SIunits}, because the latter has its own means to typeset
+% prefixes.
+% \item
+% Using the package \Lpack{mathcomp} together with \Lpack{gensymb}
+% is possible, if you need the additional `math companion' symbols.
+% Both packages will use only one common math symbol font.
+% \end{itemize}
+%
+% \section{Known deficiencies}
+% The current version of the package does not work properly 
+% in conjunction with the LY1 font encoding.
+% This will possibly be fixed in a future release, if there is an actual need.
+%
+% \StopEventually{}
+% 
+% \section{Implementation}
+% 
+% The options are implemented using switches:
+%    \begin{macrocode}
+%<*package>
+\newif\ifgns at Upomega
+\newif\ifgns at Omega
+\newif\ifgns at upmu
+%    \end{macrocode}
+%    \begin{macrocode}
+\DeclareOption{Upomega}{\gns at Upomegatrue}
+\DeclareOption{Omega}{\gns at Omegatrue}
+\DeclareOption{upmu}{\gns at upmutrue}
+\ProcessOptions\relax
+%    \end{macrocode}
+% These are the generic commands:
+%    \begin{macrocode}
+\newcommand\celsius{}
+\newcommand\degree{}
+\newcommand\ohm{}
+%    \end{macrocode}
+% The following macros will be used later to actually define the generic commands.
+% We start with a macro to fake \cmd{\degree} and \cmd{\celsius} and to generate
+% a warning message for \cmd{\perthousand}:
+%    \begin{macrocode}
+\def\gns at usefakedsymbols{%
+\renewcommand{\degree}{\ensuremath{^\circ}}
+\DeclareRobustCommand{\celsius}{%
+  \ifmmode^\circ\mathrm{C}\else$^\circ$C\fi}
+\PackageInfo{gensymb}{%
+  Faking symbols for \protect\degree\space and \protect\celsius}
+\PackageWarningNoLine{gensymb}{%
+  Not defining \protect\perthousand}
+}
+%    \end{macrocode}
+% The following macro sets up a SymbolFont for the text companion symbols to be
+% used in math.  If \cmd{\tcmu} is already defined, we assume that the
+% \Lpack{mathcomp} package is already loaded, and that the `math companion'
+% symbols need not be defined once again:
+%    \begin{macrocode}
+\def\gns at setupmathcomp{%
+\expandafter\ifx\csname tcmu\endcsname\relax
+  \DeclareSymbolFont{gns at font}{TS1}{\familydefault}{m}{n}
+  \ifx\mv at bold\@undefined\else  
+    \SetSymbolFont{gns at font}{bold}{TS1}{\familydefault}{\bfdefault}{n}
+  \fi
+  \DeclareMathSymbol{\tccelsius}{\mathord}{gns at font}{137}     % {'211}
+  \DeclareMathSymbol{\tcdegree}{\mathord}{gns at font}{176}      % {'260}
+  \DeclareMathSymbol{\tcperthousand}{\mathord}{gns at font}{135} % {'207}
+  \DeclareMathSymbol{\tcmu}{\mathord}{gns at font}{181}          % {'265}
+  \DeclareMathSymbol{\tcohm}{\mathord}{gns at font}{87}          % {'127}
+  \PackageInfo{gensymb}{Math companion symbols declared}
+\else
+  \PackageInfo{gensymb}{Math companion symbols found}
+\fi
+}
+%    \end{macrocode}
+% A macro to define \cmd{\degree}, \cmd{\celsius} and \cmd{\perthousand}
+% so as to use text companion  symbols:
+%    \begin{macrocode}
+\def\gns at usetcsymbols{%
+\DeclareRobustCommand{\degree}{%
+  \ifmmode\tcdegree\else\textdegree\fi}
+\DeclareRobustCommand{\celsius}{%
+  \ifmmode\tccelsius\else\textcelsius\fi}
+\DeclareRobustCommand{\perthousand}{%
+  \ifmmode\tcperthousand\else\textperthousand\fi}
+\PackageInfo{gensymb}{Using text companion symbols for %
+  \protect\degree, \protect\celsius\space and \protect\perthousand}
+}
+%    \end{macrocode}
+%  A macro to define \cmd{\ohm} so as to use the math symbol \cmd{\Upomega}:
+%    \begin{macrocode}
+\def\gns at useUpomega{%
+  \expandafter\ifx\csname Upomega\endcsname\relax
+    \PackageError{gensymb}
+    {You have requested the option Upomega,\MessageBreak
+    but the command \protect\Upomega\space is undefined}
+    {Load the upgreek package additionally and try again!}
+  \fi
+  \DeclareRobustCommand{\ohm}{\ifmmode\Upomega\else$\Upomega$\fi}
+  \PackageInfo{gensymb}{Using \protect\Upomega\space for \protect\ohm}
+}
+%    \end{macrocode}
+%  A macro to define \cmd{\ohm} so as to use \cmd{\Omega} (or \cmd{\upOmega},
+%  if it is provided):
+%    \begin{macrocode}
+\def\gns at useOmega{%
+  \expandafter\ifx\csname upOmega\endcsname\relax
+   \DeclareRobustCommand{\ohm}{\ifmmode\Omega\else$\Omega$\fi}
+   \PackageInfo{gensymb}{Using \protect\Omega\space for \protect\ohm}
+  \else
+   \DeclareRobustCommand{\ohm}{\ifmmode\upOmega\else$\upOmega$\fi}
+   \PackageInfo{gensymb}{Using \protect\upOmega\space for \protect\ohm}
+  \fi
+}
+%    \end{macrocode}
+%  A macro to define \cmd{\ohm} so as to use the text companion symbol:
+%    \begin{macrocode}
+\def\gns at usetextohm{%
+  \DeclareRobustCommand{\ohm}{\ifmmode\tcohm\else\textohm\fi}
+  \PackageInfo{gensymb}{Using \protect\textohm\space for \protect\ohm}
+}
+%    \end{macrocode}
+%  A macro to define \cmd{\micro} so as to use the math symbol \cmd{\upmu}:
+%    \begin{macrocode}
+\def\gns at useupmu{%
+  \expandafter\ifx\csname upmu\endcsname\relax
+    \PackageError{gensymb}
+    {You have requested the option upmu,\MessageBreak
+    but the command \protect\upmu\space is undefined}
+    {Load the upgreek package additionally and try again!}
+  \fi
+  \DeclareRobustCommand{\micro}{\ifmmode\upmu\else$\upmu$\fi}
+  \PackageInfo{gensymb}{Using \protect\upmu\space for \protect\micro}
+}
+%    \end{macrocode}
+%  A macro to define \cmd{\micro} so as to use the text companion symbol:
+%    \begin{macrocode}
+\def\gns at usetextmu{%
+  \DeclareRobustCommand{\micro}{\ifmmode\tcmu\else\textmu\fi}
+  \PackageInfo{gensymb}{Using \protect\textmu\space for \protect\micro}
+}
+%    \end{macrocode}
+%  A macro to issue a warning, if \cmd{\micro} cannot be made available:
+%    \begin{macrocode}
+\def\gns at usenomu{%
+  \PackageWarningNoLine{gensymb}{%
+    Not defining \protect\micro}
+}
+%    \end{macrocode}
+% The actual work is executed AtBeginDocument, so that we can detect the
+% presence of the \Lpack{textcomp} package and the availability of
+% \cmd{\Upmu} and other commands, regardless of the sequence of loading the
+% packages.
+%    \begin{macrocode}
+\AtBeginDocument{%
+%    \end{macrocode}
+% First, we check for \Lpack{textcomp}.  If it is loaded, we set up the
+% text companion symbols for use in math and define \cmd{\degree}, \cmd{\celsius} 
+% and \cmd{\perthousand} so that they use these. Otherwise, the symbols are faked
+% as far as possible:
+%    \begin{macrocode}
+\@ifpackageloaded{textcomp}{\gns at setupmathcomp\gns at usetcsymbols}%
+  {\gns at usefakedsymbols}
+%    \end{macrocode}
+% Now we define \cmd{\ohm}.  In case the options \Lopt{Upomega}
+% or \Lopt{Omega} have been specified, behave acordingly.
+% Otherwise, use the text companion symbol, if available.
+% Default is to use the mathematical Omega:
+%    \begin{macrocode}
+\ifgns at Upomega
+  \gns at useUpomega
+\else
+\ifgns at Omega
+  \gns at useOmega
+\else
+\@ifpackageloaded{textcomp}%
+  {\gns at usetextohm}%
+  {\gns at useOmega}
+\fi\fi
+%    \end{macrocode}
+% Next, define \cmd{\micro}. In case the option \Lopt{upmu}
+% has been specified, behave acordingly.
+% Otherwise, use the text companion symbol, if available.
+% Default is not to provide \cmd{\micro} at all.
+%    \begin{macrocode}
+\ifgns at upmu
+  \gns at useupmu
+\else
+\@ifpackageloaded{textcomp}%
+  {\gns at usetextmu}%
+  {\gns at usenomu}
+\fi
+%    \end{macrocode}
+% Finally, we destroy the commands that are no longer needed:
+%    \begin{macrocode}
+\let\gns at usefakedsymbols\relax
+\let\gns at setupmathcomp\relax
+\let\gns at usetcsymbols\relax
+\let\gns at useUpomega\relax
+\let\gns at useOmega\relax
+\let\gns at usetextohm\relax
+\let\gns at useupmu\relax
+\let\gns at usenomu\relax
+\let\gns at usetextmu\relax
+%    \end{macrocode}
+%    \begin{macrocode}
+}
+%</package>
+%    \end{macrocode}
+%
+% The next line of code is only to prevent DocStrip from adding the
+% character table to all modules:
+%    \begin{macrocode}
+\endinput
+%    \end{macrocode}
+% \Finale
+%% \CharacterTable
+%%  {Upper-case    \A\B\C\D\E\F\G\H\I\J\K\L\M\N\O\P\Q\R\S\T\U\V\W\X\Y\Z
+%%   Lower-case    \a\b\c\d\e\f\g\h\i\j\k\l\m\n\o\p\q\r\s\t\u\v\w\x\y\z
+%%   Digits        \0\1\2\3\4\5\6\7\8\9
+%%   Exclamation   \!     Double quote  \"     Hash (number) \#
+%%   Dollar        \$     Percent       \%     Ampersand     \&
+%%   Acute accent  \'     Left paren    \(     Right paren   \)
+%%   Asterisk      \*     Plus          \+     Comma         \,
+%%   Minus         \-     Point         \.     Solidus       \/
+%%   Colon         \:     Semicolon     \;     Less than     \<
+%%   Equals        \=     Greater than  \>     Question mark \?
+%%   Commercial at \@     Left bracket  \[     Backslash     \\
+%%   Right bracket \]     Circumflex    \^     Underscore    \_
+%%   Grave accent  \`     Left brace    \{     Vertical bar  \|
+%%   Right brace   \}     Tilde         \~}
+%%


Property changes on: trunk/Master/texmf-dist/source/latex/gensymb/gensymb.dtx
___________________________________________________________________
Added: svn:eol-style
## -0,0 +1 ##
+native
\ No newline at end of property
Added: trunk/Master/texmf-dist/source/latex/gensymb/gensymb.ins
===================================================================
--- trunk/Master/texmf-dist/source/latex/gensymb/gensymb.ins	                        (rev 0)
+++ trunk/Master/texmf-dist/source/latex/gensymb/gensymb.ins	2022-10-12 20:13:36 UTC (rev 64688)
@@ -0,0 +1,8 @@
+% file gensymb.ins
+\input docstrip
+\usedir{tex/latex/contrib/gensymb}
+
+\generate{\file{gensymb.sty}{\from{gensymb.dtx}{package}}}
+
+\endbatchfile
+

Added: trunk/Master/texmf-dist/tex/latex/gensymb/gensymb.sty
===================================================================
--- trunk/Master/texmf-dist/tex/latex/gensymb/gensymb.sty	                        (rev 0)
+++ trunk/Master/texmf-dist/tex/latex/gensymb/gensymb.sty	2022-10-12 20:13:36 UTC (rev 64688)
@@ -0,0 +1,144 @@
+%%
+%% This is file `gensymb.sty',
+%% generated with the docstrip utility.
+%%
+%% The original source files were:
+%%
+%% gensymb.dtx  (with options: `package')
+%% 
+%% IMPORTANT NOTICE:
+%% 
+%% For the copyright see the source file.
+%% 
+%% Any modified versions of this file must be renamed
+%% with new filenames distinct from gensymb.sty.
+%% 
+%% For distribution of the original source see the terms
+%% for copying and modification in the file gensymb.dtx.
+%% 
+%% This generated file may be distributed as long as the
+%% original source files, as listed above, are part of the
+%% same distribution. (The sources need not necessarily be
+%% in the same archive or directory.)
+%% gensymb.dtx
+\ProvidesPackage{gensymb}
+  [2022/10 v1.0.1 (KJH)]
+\newif\ifgns at Upomega
+\newif\ifgns at Omega
+\newif\ifgns at upmu
+\DeclareOption{Upomega}{\gns at Upomegatrue}
+\DeclareOption{Omega}{\gns at Omegatrue}
+\DeclareOption{upmu}{\gns at upmutrue}
+\ProcessOptions\relax
+\newcommand\celsius{}
+\newcommand\degree{}
+\newcommand\ohm{}
+\def\gns at usefakedsymbols{%
+\renewcommand{\degree}{\ensuremath{^\circ}}
+\DeclareRobustCommand{\celsius}{%
+  \ifmmode^\circ\mathrm{C}\else$^\circ$C\fi}
+\PackageInfo{gensymb}{%
+  Faking symbols for \protect\degree\space and \protect\celsius}
+\PackageWarningNoLine{gensymb}{%
+  Not defining \protect\perthousand}
+}
+\def\gns at setupmathcomp{%
+\expandafter\ifx\csname tcmu\endcsname\relax
+  \DeclareSymbolFont{gns at font}{TS1}{\familydefault}{m}{n}
+  \ifx\mv at bold\@undefined\else
+    \SetSymbolFont{gns at font}{bold}{TS1}{\familydefault}{\bfdefault}{n}
+  \fi
+  \DeclareMathSymbol{\tccelsius}{\mathord}{gns at font}{137}     % {'211}
+  \DeclareMathSymbol{\tcdegree}{\mathord}{gns at font}{176}      % {'260}
+  \DeclareMathSymbol{\tcperthousand}{\mathord}{gns at font}{135} % {'207}
+  \DeclareMathSymbol{\tcmu}{\mathord}{gns at font}{181}          % {'265}
+  \DeclareMathSymbol{\tcohm}{\mathord}{gns at font}{87}          % {'127}
+  \PackageInfo{gensymb}{Math companion symbols declared}
+\else
+  \PackageInfo{gensymb}{Math companion symbols found}
+\fi
+}
+\def\gns at usetcsymbols{%
+\DeclareRobustCommand{\degree}{%
+  \ifmmode\tcdegree\else\textdegree\fi}
+\DeclareRobustCommand{\celsius}{%
+  \ifmmode\tccelsius\else\textcelsius\fi}
+\DeclareRobustCommand{\perthousand}{%
+  \ifmmode\tcperthousand\else\textperthousand\fi}
+\PackageInfo{gensymb}{Using text companion symbols for %
+  \protect\degree, \protect\celsius\space and \protect\perthousand}
+}
+\def\gns at useUpomega{%
+  \expandafter\ifx\csname Upomega\endcsname\relax
+    \PackageError{gensymb}
+    {You have requested the option Upomega,\MessageBreak
+    but the command \protect\Upomega\space is undefined}
+    {Load the upgreek package additionally and try again!}
+  \fi
+  \DeclareRobustCommand{\ohm}{\ifmmode\Upomega\else$\Upomega$\fi}
+  \PackageInfo{gensymb}{Using \protect\Upomega\space for \protect\ohm}
+}
+\def\gns at useOmega{%
+  \expandafter\ifx\csname upOmega\endcsname\relax
+   \DeclareRobustCommand{\ohm}{\ifmmode\Omega\else$\Omega$\fi}
+   \PackageInfo{gensymb}{Using \protect\Omega\space for \protect\ohm}
+  \else
+   \DeclareRobustCommand{\ohm}{\ifmmode\upOmega\else$\upOmega$\fi}
+   \PackageInfo{gensymb}{Using \protect\upOmega\space for \protect\ohm}
+  \fi
+}
+\def\gns at usetextohm{%
+  \DeclareRobustCommand{\ohm}{\ifmmode\tcohm\else\textohm\fi}
+  \PackageInfo{gensymb}{Using \protect\textohm\space for \protect\ohm}
+}
+\def\gns at useupmu{%
+  \expandafter\ifx\csname upmu\endcsname\relax
+    \PackageError{gensymb}
+    {You have requested the option upmu,\MessageBreak
+    but the command \protect\upmu\space is undefined}
+    {Load the upgreek package additionally and try again!}
+  \fi
+  \DeclareRobustCommand{\micro}{\ifmmode\upmu\else$\upmu$\fi}
+  \PackageInfo{gensymb}{Using \protect\upmu\space for \protect\micro}
+}
+\def\gns at usetextmu{%
+  \DeclareRobustCommand{\micro}{\ifmmode\tcmu\else\textmu\fi}
+  \PackageInfo{gensymb}{Using \protect\textmu\space for \protect\micro}
+}
+\def\gns at usenomu{%
+  \PackageWarningNoLine{gensymb}{%
+    Not defining \protect\micro}
+}
+\AtBeginDocument{%
+\@ifpackageloaded{textcomp}{\gns at setupmathcomp\gns at usetcsymbols}%
+  {\gns at usefakedsymbols}
+\ifgns at Upomega
+  \gns at useUpomega
+\else
+\ifgns at Omega
+  \gns at useOmega
+\else
+\@ifpackageloaded{textcomp}%
+  {\gns at usetextohm}%
+  {\gns at useOmega}
+\fi\fi
+\ifgns at upmu
+  \gns at useupmu
+\else
+\@ifpackageloaded{textcomp}%
+  {\gns at usetextmu}%
+  {\gns at usenomu}
+\fi
+\let\gns at usefakedsymbols\relax
+\let\gns at setupmathcomp\relax
+\let\gns at usetcsymbols\relax
+\let\gns at useUpomega\relax
+\let\gns at useOmega\relax
+\let\gns at usetextohm\relax
+\let\gns at useupmu\relax
+\let\gns at usenomu\relax
+\let\gns at usetextmu\relax
+}
+\endinput
+%%
+%% End of file `gensymb.sty'.


Property changes on: trunk/Master/texmf-dist/tex/latex/gensymb/gensymb.sty
___________________________________________________________________
Added: svn:eol-style
## -0,0 +1 ##
+native
\ No newline at end of property
Modified: trunk/Master/tlpkg/bin/tlpkg-ctan-check
===================================================================
--- trunk/Master/tlpkg/bin/tlpkg-ctan-check	2022-10-12 20:11:55 UTC (rev 64687)
+++ trunk/Master/tlpkg/bin/tlpkg-ctan-check	2022-10-12 20:13:36 UTC (rev 64688)
@@ -356,7 +356,7 @@
     garrigues gastex gates gatherenum gauss
     gb4e gbt7714 gcard gchords gcite gckanbun
     gender geschichtsfrkl genealogy genealogytree gene-logic
-    genmpage gentium-tug gentle gentombow geometry
+    genmpage gensymb gentium-tug gentle gentombow geometry
     geradwp german germbib germkorr
     getfiledate getitems getmap getoptk gettitlestring gfnotation
     gfsartemisia gfsbaskerville gfsbodoni gfscomplutum gfsdidot gfsdidotclassic

Modified: trunk/Master/tlpkg/tlpsrc/collection-latexextra.tlpsrc
===================================================================
--- trunk/Master/tlpkg/tlpsrc/collection-latexextra.tlpsrc	2022-10-12 20:11:55 UTC (rev 64687)
+++ trunk/Master/tlpkg/tlpsrc/collection-latexextra.tlpsrc	2022-10-12 20:13:36 UTC (rev 64688)
@@ -569,6 +569,7 @@
 depend gcite
 depend gender
 depend genmpage
+depend gensymb
 depend getfiledate
 depend getitems
 depend gindex

Added: trunk/Master/tlpkg/tlpsrc/gensymb.tlpsrc
===================================================================


More information about the tex-live-commits mailing list.