Help!

[Y&Y, Inc.]

Hi Blenda and Louis
Sorry -- I'm stuck again, and getting desperate!
After you sent the new version of 2.2 (Windows 2000), we reinstalled it,
and I have been using it.
But I'm still having problems with fonts. One journal that I run uses CM
and that is mostly fine, but the JCM uses your Maths fonts, and I also
need some AMS fonts sometimes. When we reinstalled, I assumed that the
fonts that I had previously dragged across from my old machine would be
picked up, but there are lots (e.g., MSBM8, EUFM10, EUFM7, EUFM8, MSAM8)
that appear in the fonts folder with a red "a", but don't show up in
either the "show fonts" list or the Windows character map. The TFM files
appear to be where they should be, so I don't understand it. I tried
going to the CTAN site and re-downloading the PFM, PFB and TFM files, in
case the ones that I had were corrupted somehow, but that doesn't seem
to make a difference.
Could it have something to do with the fact that I recycled (as you
suggested) my old DVIWINDO.ini file? I have gone through it with a fine
tooth-comb, but can't see anything missing. I attach it here, in case
you can spot something obvious.
My style file for the journal was written by David Carlisle (it was
David who suggested that your package would be "idiot-proof" for someone
who is an editor not a computer buff!), so I'd expect it to be
compatible with your stuff -- and it has certainly run on my old machine
for five years without any real problems. I haven't yet put Distiller
and Exchange on the new machine, until I had this lot working properly.
What happens is that when I compile, that runs without complaint, but I
get moans about fonts as I page through the compiled document. If I try
to print, the fonts I mentioned come up with an
"expecting number, not 'dup' "
error message. The paper will print out __without__ DVIPSONE, but with
substitute symbols in place. Using DVIPSONE, I can print from page 2
onwards (which seems to work fine; as far as I can see, the symbols are
OK), but if I ask for the whole paper, I get only the very first line of
the first page, then a page with the error message :
ERROR: undefined
OFFENDING COMMAND: Fit
STACK:
-mark-
/View
1
/Page
-mark-
0
0
0
0
3.60599e.07
-4.73629e+06
0
0
0
0
3.5765e+07
-473629e+06
0
0
0
0
3.71412e+07
-4.73629e+06
0
0
0
0
I have NO idea what all that means! I'm sorry if this is all a bit
garbled, but I am really out of my depth here!
Is the first step to save the current ini file somewhere, and reinstall
with the defaults? Will it then pick up any fonts that are already
resident? I'd be really grateful for your help, as I've spent hours on
this already.
(I have a paper that I badly need to publish. I can't do it from my old
machine, as for some reason the .EPS figure comes out spread out across
the margin and flying off into the distance, whereas on the 2000 machine
it works fine -- but I can't get page 1!)
Thanks and all the best
Sue
Sue Rodd [jcm at lms.ac.uk]

<<...>>
;Installed: 01/31/98 17:17:25;moved to new machine 10/12/03; corrected
paths 10/1/03; modified 15/1/03

[Registration]
Name=Sue Rodd
Company=London Mathematical Society

[Documents]
DummyEntry=1
File1="c:\texdocs\lms2001\lms2001-024\unpublished\lms2001-024.dvi"
File2="c:\texdocsnew\blms1550\blms1554\blms1554.dvi"
File3="c:\texdocs\jcm2001\jcm2001-016b\jcm2001-016c.dvi"
File4="c:\texdocs\jcm2002\jcm2002-004b\jcm2002-004c.dvi"
File5="c:\texdocs\jcm2001\jcm2001-016b\jcm2001-016b.dvi"
File6="c:\texdocsnew\jcm2001\jcm2001-016b\jcm2001-016b.dvi"
File7="c:\texdocsnew\blms1530\blms1533\blms1533.dvi"
File8="c:\texdocsnew\blms1520\blms1529\blms1529.dvi"
File9="c:\documents and settings\sue rodd\local settings\temporary
internet files\olk22df\changes.dvi"

[Window]
DummyEntry=1
Windows=5.0 Build: 2195 Platform: Windows 2000 CSD:  Service Pack 3
Vector=C:\yandy\FONTS\ENCODING\texnansi.vec
Save=1
Size=-175 77 1036 780 0
Preferences=0 0 0 0 0 0 1 1 1 0 1 0 1 1 1 0 0 1 0 1 9 1 0 0 0 1 1 1 1 0
0 0 1 1 1
Mapping=3242 727 -1
FontMapping=-600 0 0
Defaults=c:\texdocs\lms2001\lms2001-024\unpublished\ *.dvi .dvi
TestSize=340
Filters=4 5
Units=mm
Version=2.0.11
Font=Helvetica
FileName=lms2001-024.dvi
SourceDefaults=c:\texdocs\lms2001\lms2001-024\unpublished\ *.tex .tex
SourceFileName=lms2001-024.tex
NotFirstSize=6 17 1003 711 0
NotFirstMapping=0 0 0
DVIPSONE=-K
LastPrinter=HP LaserJet 5/5M - Enhanced,WINSPOOL,FILE:
SpreadMapping=0 0 0
AuxWinPos=632 127 0 0
LastError=Not linked to ATM
LastErrorTime=2001 Jan 23 12:14:19
ATMVersion=3.02
ATMBuildStr=R v3.02-32S012G01NN
ATMFlags=0
Preferences2=1 1 0 0 0 1 0 1 0 0
ConsoleSize=156 111 819 653
IgnoreBadInstall=1

[Environment]
DummyEntry=1
YANDYPATH=C:\YANDY
TEXFORMATS=C:\YANDY\YANDYTEX\FMT
TEXPOOL=C:\YANDY\YANDYTEX\FMT
PSFONTS=C:\PSFONTS;C:\WINNT\FONTS\\
PSPATH=C:\EPS;C:\TIFF;C:\WMF;C:\TEXDOCS\\
VECPATH=C:\YANDY\FONTS\ENCODING
PREPATH=C:\YANDY\DVIPSONE
SUBPATH=C:\YANDY\DVIPSONE\SUB
TEXINPUTS=C:\YANDY\TEXINPUT;C:\YANDY\TEX\LATEX\\;C:\YANDY\TEX\BASE\\;C:\
YANDY\TEXDOCS\\
AMSTEX=C:\YANDY\TEXINPUT;C:\YANDY\TEX\LATEX\\;C:\YANDY\TEX\BASE\\
LPLAIN=C:\YANDY\TEXINPUT;C:\YANDY\TEX\LATEX\\;C:\YANDY\TEX\LATEX209\\;C:
\YANDY\TEX\BASE\\
LATEX=C:\YANDY\TEXINPUT;C:\YANDY\TEX\LATEX\\;C:\YANDY\TEX\BASE\\
ENCODING=TEXNANSI
TEXFONTS=C:\YANDY\FONTS\TFM\\;C:\YANDY\FONTS\\
TEXNANSI=C:\YANDY\FONTS\TFM\TEXNANSI\TFM\\;C:\YANDY\FONTS\TFM\NONTEXT\;C
:\YANDY\FONTS\TFM\TEXNANSI\
ANSINEW=C:\YANDY\FONTS\TFM\ANSINEW\TFM\\;C:\YANDY\FONTS\TFM\NONTEXT\;C:\
YANDY\FONTS\TFM\ANSINEW\
TEXTEXT=C:\YANDY\FONTS\TFM\TEXTEXT\TFM;C:\YANDY\FONTS\TFM\NONTEXT\;C:\YA
NDY\FONTS\TFM\TEXTEXT\
TEXEDIT=C:\YANDY\WinEdt\WinEdt.exe [Open('%s');SelLine(%d,8)]
TEX256=C:\YANDY\FONTS\TFM\TEX256\TFM;C:\YANDY\FONTS\TFM\NONTEXT\;C:\YAND
Y\FONTS\TFM\TEX256\
STANDARD=C:\YANDY\FONTS\TFM\STANDARD\TFM;C:\YANDY\FONTS\TFM\NONTEXT\;C:\
YANDY\FONTS\TFM\STANDARD\

[Diagnostics]
Windows=5.0 Build: 2195 Platform: Windows 2000 CSD: Service Pack 3
Vector=C:\YANDY\FONTS\ENCODING\texnansi.vec
Config=Win 95: 0, Win 98: 0, Win NT: 1, New Shell: 1, W2K: 1, WXP: 0 ATM
loaded: 0, TTF usable: 1
Screen=16 BitsPerPixel, 1 Plane, 16 ColorRes, 0 True Color, 96 x 96
logical dpi on 1024 x 768 screen
Version=2.2.8
Executable=C:\yandy\DVIWINDO\dviwindo.exe
LastWinExe=C:\yandy\pfe\pfe32.exe
c:\texdocs\lms2001\lms2001-024\unpublished\lms2001-024.tex
Faces=324
LastPrinter=HP LaserJet 5/5M PostScript,winspool,LPT1:
LastDVIPSONE=DVIPSONE -v -d=LPT1 -B=1 -E=2 -l=a4 -k
c:\texdocs\lms2001\lms2001-024\unpublished\lms2001-024.dvi
PassThrough_Used=PASSTHROUGH
LastDLL=DVIPSONE
ProcSetFile=C:\YANDY\DVIPSONE\dvipream.enc
LastTeX=C:\YANDY\YANDYTEX\TEX.BAT +latex
c:\texdocs\lms2001\lms2001-024\unpublished\lms2001-024.tex
BadFont0=Face Name: @Batang,REGULAR Full Name: Batang & BatangChe &
Gungsuh & GungsuhChe
BadFont1=Face Name: @MS Mincho,REGULAR Full Name: MS Mincho & MS PMincho
BadFont2=Face Name: @SimSun,REGULAR Full Name: SimSun & NSimSun

[Applications]
Help|F1=C:\yandy\dviwindo\dviwindo.exe C:\yandy\dviwindo\dvi_help.dvi
DOS (Full Screen)|F2=C:\yandy\dviwindo\dosprmpt.pif
DOS (Windowed)|F3=C:\yandy\dviwindo\doswinpt.pif
Notepad|F4=C:\WINDOWS\notepad.exe @.tex
WinEdt=C:\yandy\WinEdt\WinEdt.exe -v @.tex
-> Notepad|C-F4=$Window(Notepad...)
Separator7=Line
PFE Editor|F11=C:\yandy\pfe\pfe32.exe @.tex
-> PFE Editor|C-F11=$Window(Programmer's File Editor)
Separator10=Line
DVIPSONE|F12=C:\YANDY\DVIPSONE\DVIPSONE.BAT -d=LPT1 *
Separator12=Line
iniTeX|F9=C:\YANDY\YANDYTEX\INITEX.BAT "Format Source File|plain"
"Format Menu Name|TeX"
Separator14=Line
plain TeX|F5=C:\YANDY\YANDYTEX\TEX.BAT @.tex
AMSTeX|F6=C:\YANDY\YANDYTEX\TEX.BAT +amstex @.tex
LaTeX 2e|F8=C:\YANDY\YANDYTEX\TEX.BAT +latex @.tex


To unsubscribe send a message to admin at yandy.com