texlive[67325] Master: tl-update-auto
commits+karl at tug.org
commits+karl at tug.org
Sun Jun 11 01:48:24 CEST 2023
Revision: 67325
http://tug.org/svn/texlive?view=revision&revision=67325
Author: karl
Date: 2023-06-11 01:48:24 +0200 (Sun, 11 Jun 2023)
Log Message:
-----------
tl-update-auto
Modified Paths:
--------------
trunk/Master/texmf-dist/tex/texinfo/texinfo.tex
trunk/Master/tlpkg/installer/ctan-mirrors.pl
Modified: trunk/Master/texmf-dist/tex/texinfo/texinfo.tex
===================================================================
--- trunk/Master/texmf-dist/tex/texinfo/texinfo.tex 2023-06-10 23:43:33 UTC (rev 67324)
+++ trunk/Master/texmf-dist/tex/texinfo/texinfo.tex 2023-06-10 23:48:24 UTC (rev 67325)
@@ -3,7 +3,7 @@
% Load plain if necessary, i.e., if running under initex.
\expandafter\ifx\csname fmtname\endcsname\relax\input plain\fi
%
-\def\texinfoversion{2023-03-27.21}
+\def\texinfoversion{2023-06-08.14}
%
% Copyright 1985, 1986, 1988, 1990-2023 Free Software Foundation, Inc.
%
@@ -275,8 +275,7 @@
% \topmark doesn't work for the very first chapter (after the title
% page or the contents), so we use \firstmark there -- this gets us
% the mark with the chapter defs, unless the user sneaks in, e.g.,
-% @setcolor (or @url, or @link, etc.) between @contents and the very
-% first @chapter.
+% @setcolor (or @url etc.) between @contents and the very first @chapter.
\def\gettopheadingmarks{%
\ifcase0\the\savedtopmark\fi
\ifx\thischapter\empty \ifcase0\firstmark\fi \fi
@@ -4950,6 +4949,7 @@
\commondummyword\inforef {}%
\commondummyword\kbd {}%
\commondummyword\key {}%
+ \commondummyword\link {}%
\commondummyword\math {}%
\commondummyword\option {}%
\commondummyword\pxref {}%
@@ -5783,7 +5783,7 @@
% below is chosen so that the gutter has the same value (well, +-<1pt)
% as it did when we hard-coded it.
%
- % We put the result in a separate register, \doublecolumhsize, so we
+ % We put the result in a separate register, \doublecolumnhsize, so we
% can restore it in \pagesofar, after \hsize itself has (potentially)
% been clobbered.
%
@@ -8180,7 +8180,7 @@
% Read recursive and nonrecursive macro bodies. (They're different since
% rec and nonrec macros end differently.)
%
-% We are in \macrobodyctxt, and the \xdef causes backslashshes in the macro
+% We are in \macrobodyctxt, and the \xdef causes backslashes in the macro
% body to be transformed.
% Set \macrobody to the body of the macro, and call \macrodef.
%
@@ -8808,109 +8808,11 @@
\def\xrefX[#1,#2,#3,#4,#5,#6]{\begingroup
\unsepspaces
%
- % Get args without leading/trailing spaces.
- \def\printedrefname{\ignorespaces #3}%
- \setbox\printedrefnamebox = \hbox{\printedrefname\unskip}%
- %
+ \getprintedrefname{#1}{#3}{#5}%
\def\infofilename{\ignorespaces #4}%
\setbox\infofilenamebox = \hbox{\infofilename\unskip}%
%
- \def\printedmanual{\ignorespaces #5}%
- \setbox\printedmanualbox = \hbox{\printedmanual\unskip}%
- %
- % If the printed reference name (arg #3) was not explicitly given in
- % the @xref, figure out what we want to use.
- \ifdim \wd\printedrefnamebox = 0pt
- % No printed node name was explicitly given.
- \expandafter\ifx\csname SETxref-automatic-section-title\endcsname \relax
- % Not auto section-title: use node name inside the square brackets.
- \def\printedrefname{\ignorespaces #1}%
- \else
- % Auto section-title: use chapter/section title inside
- % the square brackets if we have it.
- \ifdim \wd\printedmanualbox > 0pt
- % It is in another manual, so we don't have it; use node name.
- \def\printedrefname{\ignorespaces #1}%
- \else
- \ifhavexrefs
- % We (should) know the real title if we have the xref values.
- \def\printedrefname{\refx{#1-title}}%
- \else
- % Otherwise just copy the Info node name.
- \def\printedrefname{\ignorespaces #1}%
- \fi%
- \fi
- \fi
- \fi
- %
- % Make link in pdf output.
- \ifpdf
- % For pdfTeX and LuaTeX
- {\indexnofonts
- \makevalueexpandable
- \turnoffactive
- % This expands tokens, so do it after making catcode changes, so _
- % etc. don't get their TeX definitions. This ignores all spaces in
- % #4, including (wrongly) those in the middle of the filename.
- \getfilename{#4}%
- %
- % This (wrongly) does not take account of leading or trailing
- % spaces in #1, which should be ignored.
- \setpdfdestname{#1}%
- %
- \ifx\pdfdestname\empty
- \def\pdfdestname{Top}% no empty targets
- \fi
- %
- \leavevmode
- \startlink attr{/Border [0 0 0]}%
- \ifnum\filenamelength>0
- goto file{\the\filename.pdf} name{\pdfdestname}%
- \else
- goto name{\pdfmkpgn{\pdfdestname}}%
- \fi
- }%
- \setcolor{\linkcolor}%
- \else
- \ifx\XeTeXrevision\thisisundefined
- \else
- % For XeTeX
- {\indexnofonts
- \makevalueexpandable
- \turnoffactive
- % This expands tokens, so do it after making catcode changes, so _
- % etc. don't get their TeX definitions. This ignores all spaces in
- % #4, including (wrongly) those in the middle of the filename.
- \getfilename{#4}%
- %
- % This (wrongly) does not take account of leading or trailing
- % spaces in #1, which should be ignored.
- \setpdfdestname{#1}%
- %
- \ifx\pdfdestname\empty
- \def\pdfdestname{Top}% no empty targets
- \fi
- %
- \leavevmode
- \ifnum\filenamelength>0
- % With default settings,
- % XeTeX (xdvipdfmx) replaces link destination names with integers.
- % In this case, the replaced destination names of
- % remote PDFs are no longer known. In order to avoid a replacement,
- % you can use xdvipdfmx's command line option `-C 0x0010'.
- % If you use XeTeX 0.99996+ (TeX Live 2016+),
- % this command line option is no longer necessary
- % because we can use the `dvipdfmx:config' special.
- \special{pdf:bann << /Border [0 0 0] /Type /Annot /Subtype /Link /A
- << /S /GoToR /F (\the\filename.pdf) /D (\pdfdestname) >> >>}%
- \else
- \special{pdf:bann << /Border [0 0 0] /Type /Annot /Subtype /Link /A
- << /S /GoTo /D (\pdfdestname) >> >>}%
- \fi
- }%
- \setcolor{\linkcolor}%
- \fi
- \fi
+ \startxreflink{#1}{#4}%
{%
% Have to otherify everything special to allow the \csname to
% include an _ in the xref name, etc.
@@ -8940,7 +8842,7 @@
\fi
\else
% node/anchor (non-float) references.
- %
+ %
% If we use \unhbox to print the node names, TeX does not insert
% empty discretionaries after hyphens, which means that it will not
% find a line break at a hyphen in a node names. Since some manuals
@@ -8947,10 +8849,10 @@
% are best written with fairly long node names, containing hyphens,
% this is a loss. Therefore, we give the text of the node name
% again, so it is as if TeX is seeing it for the first time.
- %
+ %
\ifdim \wd\printedmanualbox > 0pt
% Cross-manual reference with a printed manual name.
- %
+ %
\crossmanualxref{\cite{\printedmanual\unskip}}%
%
\else\ifdim \wd\infofilenamebox > 0pt
@@ -8957,7 +8859,7 @@
% Cross-manual reference with only an info filename (arg 4), no
% printed manual name (arg 5). This is essentially the same as
% the case above; we output the filename, since we have nothing else.
- %
+ %
\crossmanualxref{\code{\infofilename\unskip}}%
%
\else
@@ -8991,6 +8893,93 @@
\endlink
\endgroup}
+% \getprintedrefname{NODE}{LABEL}{MANUAL}
+% - set \printedrefname and \printedmanual
+%
+\def\getprintedrefname#1#2#3{%
+ % Get args without leading/trailing spaces.
+ \def\printedrefname{\ignorespaces #2}%
+ \setbox\printedrefnamebox = \hbox{\printedrefname\unskip}%
+ %
+ \def\printedmanual{\ignorespaces #3}%
+ \setbox\printedmanualbox = \hbox{\printedmanual\unskip}%
+ %
+ % If the printed reference name (arg #2) was not explicitly given in
+ % the @xref, figure out what we want to use.
+ \ifdim \wd\printedrefnamebox = 0pt
+ % No printed node name was explicitly given.
+ \expandafter\ifx\csname SETxref-automatic-section-title\endcsname \relax
+ % Not auto section-title: use node name inside the square brackets.
+ \def\printedrefname{\ignorespaces #1}%
+ \else
+ % Auto section-title: use chapter/section title inside
+ % the square brackets if we have it.
+ \ifdim \wd\printedmanualbox > 0pt
+ % It is in another manual, so we don't have it; use node name.
+ \def\printedrefname{\ignorespaces #1}%
+ \else
+ \ifhavexrefs
+ % We (should) know the real title if we have the xref values.
+ \def\printedrefname{\refx{#1-title}}%
+ \else
+ % Otherwise just copy the Info node name.
+ \def\printedrefname{\ignorespaces #1}%
+ \fi%
+ \fi
+ \fi
+ \fi
+}
+
+% \startxreflink{NODE}{FILE} - start link in pdf output.
+\def\startxreflink#1#2{%
+ \ifpdforxetex
+ % For pdfTeX and LuaTeX
+ {\indexnofonts
+ \makevalueexpandable
+ \turnoffactive
+ % This expands tokens, so do it after making catcode changes, so _
+ % etc. don't get their TeX definitions. This ignores all spaces in
+ % #2, including (wrongly) those in the middle of the filename.
+ \getfilename{#2}%
+ %
+ % This (wrongly) does not take account of leading or trailing
+ % spaces in #1, which should be ignored.
+ \setpdfdestname{#1}%
+ %
+ \ifx\pdfdestname\empty
+ \def\pdfdestname{Top}% no empty targets
+ \fi
+ %
+ \leavevmode
+ \ifpdf
+ \startlink attr{/Border [0 0 0]}%
+ \ifnum\filenamelength>0
+ goto file{\the\filename.pdf} name{\pdfdestname}%
+ \else
+ goto name{\pdfmkpgn{\pdfdestname}}%
+ \fi
+ \else % XeTeX
+ \ifnum\filenamelength>0
+ % With default settings,
+ % XeTeX (xdvipdfmx) replaces link destination names with integers.
+ % In this case, the replaced destination names of
+ % remote PDFs are no longer known. In order to avoid a replacement,
+ % you can use xdvipdfmx's command line option `-C 0x0010'.
+ % If you use XeTeX 0.99996+ (TeX Live 2016+),
+ % this command line option is no longer necessary
+ % because we can use the `dvipdfmx:config' special.
+ \special{pdf:bann << /Border [0 0 0] /Type /Annot /Subtype /Link /A
+ << /S /GoToR /F (\the\filename.pdf) /D (\pdfdestname) >> >>}%
+ \else
+ \special{pdf:bann << /Border [0 0 0] /Type /Annot /Subtype /Link /A
+ << /S /GoTo /D (\pdfdestname) >> >>}%
+ \fi
+ \fi
+ }%
+ \setcolor{\linkcolor}%
+ \fi
+}
+
% can be overridden in translation files
\def\putpageref#1{%
\space\putwordpage\tie\refx{#1-pg}}
@@ -9028,6 +9017,20 @@
%
\def\xrefprintnodename#1{[#1]}
+% @link{NODENAME, LABEL, MANUAL} - create a "plain" link, with no
+% page number. Not useful if printed on paper.
+%
+\def\link#1{\linkX[#1,,,]}
+\def\linkX[#1,#2,#3,#4]{%
+ \begingroup
+ \getprintedrefname{#1}{#2}{#3}%
+ \startxreflink{#1}{#3}%
+ \printedrefname
+ \endlink
+ \endgroup
+}
+
+
% Things referred to by \setref.
%
\def\Ynothing{}
Modified: trunk/Master/tlpkg/installer/ctan-mirrors.pl
===================================================================
--- trunk/Master/tlpkg/installer/ctan-mirrors.pl 2023-06-10 23:43:33 UTC (rev 67324)
+++ trunk/Master/tlpkg/installer/ctan-mirrors.pl 2023-06-10 23:48:24 UTC (rev 67325)
@@ -150,7 +150,6 @@
'Russia' => {
'https://ctan.altspu.ru/' => 1,
'https://mirror.macomnet.net/pub/CTAN/' => 1,
- 'https://mirror.truenetwork.ru/CTAN/' => 1,
'https://mirrors.mi-ras.ru/CTAN/' => 1,
},
'Slovenia' => {
@@ -179,6 +178,7 @@
'Canada' => {
'https://ctan.math.ca/tex-archive/' => 1,
'https://ctan.mirror.globo.tech/' => 1,
+ 'https://ctan.mirror.rafal.ca/' => 1,
'https://mirror.csclub.uwaterloo.ca/CTAN/' => 1,
'https://mirror.its.dal.ca/ctan/' => 1,
'https://mirror.quantum5.ca/CTAN/' => 1,
More information about the tex-live-commits
mailing list.