texlive[67708] Master/texmf-dist: mitthesis (22jul23)
commits+karl at tug.org
commits+karl at tug.org
Sat Jul 22 22:20:15 CEST 2023
Revision: 67708
http://tug.org/svn/texlive?view=revision&revision=67708
Author: karl
Date: 2023-07-22 22:20:15 +0200 (Sat, 22 Jul 2023)
Log Message:
-----------
mitthesis (22jul23)
Modified Paths:
--------------
trunk/Master/texmf-dist/doc/latex/mitthesis/MIT-Thesis.pdf
trunk/Master/texmf-dist/doc/latex/mitthesis/MIT-thesis-template/MIT-Thesis.tex
trunk/Master/texmf-dist/doc/latex/mitthesis/MIT-thesis-template/appendixa.tex
trunk/Master/texmf-dist/doc/latex/mitthesis/MIT-thesis-template/chapter1.tex
trunk/Master/texmf-dist/doc/latex/mitthesis/README.md
trunk/Master/texmf-dist/doc/latex/mitthesis/examples/cover_page_samples/No_cc_license.pdf
trunk/Master/texmf-dist/doc/latex/mitthesis/examples/cover_page_samples/One_author_one_degree.pdf
trunk/Master/texmf-dist/doc/latex/mitthesis/examples/cover_page_samples/One_author_two_degrees.pdf
trunk/Master/texmf-dist/doc/latex/mitthesis/examples/cover_page_samples/One_author_two_degrees_from_one_department.pdf
trunk/Master/texmf-dist/doc/latex/mitthesis/examples/cover_page_samples/Two_authors_one_degree.pdf
trunk/Master/texmf-dist/doc/latex/mitthesis/examples/cover_page_samples/Two_authors_two_degrees.pdf
trunk/Master/texmf-dist/doc/latex/mitthesis/examples/cover_page_samples/latex_sources/No_cc_license.tex
trunk/Master/texmf-dist/doc/latex/mitthesis/examples/cover_page_samples/latex_sources/One_author_one_degree.tex
trunk/Master/texmf-dist/doc/latex/mitthesis/examples/cover_page_samples/latex_sources/One_author_two_degrees.tex
trunk/Master/texmf-dist/doc/latex/mitthesis/examples/cover_page_samples/latex_sources/One_author_two_degrees_from_one_department.tex
trunk/Master/texmf-dist/doc/latex/mitthesis/examples/cover_page_samples/latex_sources/Two_authors_one_degree.tex
trunk/Master/texmf-dist/doc/latex/mitthesis/examples/cover_page_samples/latex_sources/Two_authors_two_degrees.tex
trunk/Master/texmf-dist/doc/latex/mitthesis/examples/font_samples/Defaultfonts.pdf
trunk/Master/texmf-dist/doc/latex/mitthesis/examples/font_samples/Fira_Newtxsf.pdf
trunk/Master/texmf-dist/doc/latex/mitthesis/examples/font_samples/Heros-Stix2.pdf
trunk/Master/texmf-dist/doc/latex/mitthesis/examples/font_samples/Libertine.pdf
trunk/Master/texmf-dist/doc/latex/mitthesis/examples/font_samples/Lucida.pdf
trunk/Master/texmf-dist/doc/latex/mitthesis/examples/font_samples/Newtx-sans-text.pdf
trunk/Master/texmf-dist/doc/latex/mitthesis/examples/font_samples/Newtx.pdf
trunk/Master/texmf-dist/doc/latex/mitthesis/examples/font_samples/Stix2.pdf
trunk/Master/texmf-dist/doc/latex/mitthesis/examples/font_samples/Termes-Stix2.pdf
trunk/Master/texmf-dist/doc/latex/mitthesis/examples/font_samples/Termes.pdf
trunk/Master/texmf-dist/doc/latex/mitthesis/examples/font_samples/latex_sources/Defaultfonts.tex
trunk/Master/texmf-dist/doc/latex/mitthesis/examples/font_samples/latex_sources/Fira_Newtxsf.tex
trunk/Master/texmf-dist/doc/latex/mitthesis/examples/font_samples/latex_sources/Heros-Stix2.tex
trunk/Master/texmf-dist/doc/latex/mitthesis/examples/font_samples/latex_sources/Libertine.tex
trunk/Master/texmf-dist/doc/latex/mitthesis/examples/font_samples/latex_sources/Lucida.tex
trunk/Master/texmf-dist/doc/latex/mitthesis/examples/font_samples/latex_sources/Newtx-sans-text.tex
trunk/Master/texmf-dist/doc/latex/mitthesis/examples/font_samples/latex_sources/Newtx.tex
trunk/Master/texmf-dist/doc/latex/mitthesis/examples/font_samples/latex_sources/Stix2.tex
trunk/Master/texmf-dist/doc/latex/mitthesis/examples/font_samples/latex_sources/Termes-Stix2.tex
trunk/Master/texmf-dist/doc/latex/mitthesis/examples/font_samples/latex_sources/Termes.tex
trunk/Master/texmf-dist/doc/latex/mitthesis/mitthesis-doc/mitthesis-doc.pdf
trunk/Master/texmf-dist/doc/latex/mitthesis/mitthesis-doc/mitthesis-doc.tex
trunk/Master/texmf-dist/tex/latex/mitthesis/mitthesis.cls
Modified: trunk/Master/texmf-dist/doc/latex/mitthesis/MIT-Thesis.pdf
===================================================================
(Binary files differ)
Modified: trunk/Master/texmf-dist/doc/latex/mitthesis/MIT-thesis-template/MIT-Thesis.tex
===================================================================
--- trunk/Master/texmf-dist/doc/latex/mitthesis/MIT-thesis-template/MIT-Thesis.tex 2023-07-22 20:19:50 UTC (rev 67707)
+++ trunk/Master/texmf-dist/doc/latex/mitthesis/MIT-thesis-template/MIT-Thesis.tex 2023-07-22 20:20:15 UTC (rev 67708)
@@ -3,7 +3,7 @@
% !BIB program = biber
% This file is MIT-Thesis.tex, a template for producing MIT theses with the mitthesis class.
-% Version: 1.04, 2023/07/03
+% Version: 1.05, 2023/07/21
% Author: John H. Lienhard (c) 2023. Reuse under the MIT license: https://ctan.org/license/mit
% Documentation: https://ctan.org/pkg/mitthesis
@@ -10,8 +10,7 @@
%% Don't modify the \DocumentMetadata command unless you know what it does.
%% If this command throws an "undefined" error, your latex system is out of date: try commenting this command out.
-\DocumentMetadata
-{
+\DocumentMetadata{
pdfstandard = a-2b,
pdfversion = 1.7,
lang = en-US,
@@ -19,7 +18,7 @@
}
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
-\documentclass[twoside]{mitthesis} %,fontset=libertine ,fontset=newtx-sans-text, fontset=heros-stix2,fontset=stix2
+\documentclass[twoside]{mitthesis} %,fontset=libertine ,fontset=newtx-sans-text, fontset=heros-stix2, fontset=stix2
%
% option [twoside] gives facing-page behavior for printing; omitting it will eliminate even-numbered blank pages.
% option [lineno] provides line numbers, as for editing
@@ -115,7 +114,6 @@
%%%%%%%%%%% Hyperref setting and metadata %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
-
\newcommand*\YourName{John H. Lienhard}% <====== CHANGE TO YOUR NAME !!!
\hypersetup{%
@@ -125,9 +123,9 @@
pdftitle={MIT thesis template},
pdfkeywords={\YourName, Massachusetts Institute of Technology, MIT},
pdfauthor={\YourName},
+% pdfauthor={{John H. Lienhard, V}},% if you have a comma in your name, surround by {..}
pdfauthortitle={Professor of Mechanical Engineering},
pdfcaptionwriter={\YourName},
-% pdfcaptionwriter={{John H. Lienhard, V}},% if you have a comma in your name, surround by {..}
pdfurl={https://lienhard.mit.edu},
pdfcontactemail={lienhard at mit.edu},
pdfcontactaddress={77 Massachusetts Avenue, Room 3-166},
@@ -155,10 +153,10 @@
pdfdisplaydoctitle=true,
pdfstartview=Fit,
pdfnewwindow=true,
-%
- pdfcopyright={Copyright © \DegreeYear\ by \YourName. \PDFRightsText},% definitions made by class file, don't change
- pdflicenseurl={\CCurl},% definition made by class file, don't change
}
+\AtEndDocument{
+ \hypersetup{pdfcopyright={Copyright © \DegreeYear\ by \YourName. \PDFRightsText},}% 1st and 3rd commands are defined by class file.
+}
%%%%%%%%%%%%%% End preamble %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
@@ -187,14 +185,15 @@
% If there is more than one supervisor, use the \Supervisor command for each.
\Supervisor{Edward C. Pickering}{Professor of Physics}
-%\Supervisor{Secunda Castor}{Department of Mechanical Engineering}
+%\Supervisor{Secunda Castor}{Professor of Research}
%\Supervisor{Quintus Castor}{Professor of Log Dams}
% Professor who formally accepts theses for your department (e.g., the Graduate Officer, Professor Sméagol,...)
% If more than one department, use more than once
% If you need to reduce vertical space, put the acceptor title in the second argument and leave the third blank {}.
-\Acceptor{Primus Castor}{Professor of Wetlands Engineering}{Graduate Officer, First Degree Department}
-%\Acceptor{Tertius Castor}{Professor of Log Dams}{Graduate Officer, Second Degree Department}
+\Acceptor{Primus Castor}{Professor of Wetlands Engineering}{Undergraduate Officer, Department of Physics}
+%\Acceptor{Tertius Castor}{Professor of Log Dams}{Graduate Officer, Department of Research}
+%\Acceptor{Quarta Castor}{Professor of Lodge Building}{Graduate Officer, Department of Mechanical Engineering}
% If your title page is overflowing (from too many names, degrees, etc.), you can scale
% down the Signature block at the bottom with this command, or use another creative solution...
@@ -245,21 +244,11 @@
\cleardoublepage
-%%% Table of contents and lists of stuff (edit only if you want different lists) %%%%%%%%%%%%%%%%
+%%% Table of contents and lists of stuff (delete lists you don't need, e.g., if no tables) %%%%%%%%
- \pdfbookmark[0]{Table of Contents}{toc}%
\tableofcontents
- \cleardoublepage
-
- \phantomsection
\listoffigures
- \addcontentsline{toc}{chapter}{\protect\textbf{\listfigurename}}%
- \cleardoublepage
-
- \phantomsection
\listoftables
- \addcontentsline{toc}{chapter}{\protect\textbf{\listtablename}}%
- \cleardoublepage
%%% Chapters of thesis %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
Modified: trunk/Master/texmf-dist/doc/latex/mitthesis/MIT-thesis-template/appendixa.tex
===================================================================
--- trunk/Master/texmf-dist/doc/latex/mitthesis/MIT-thesis-template/appendixa.tex 2023-07-22 20:19:50 UTC (rev 67707)
+++ trunk/Master/texmf-dist/doc/latex/mitthesis/MIT-thesis-template/appendixa.tex 2023-07-22 20:20:15 UTC (rev 67708)
@@ -1,5 +1,5 @@
% From mitthesis package
-% Version: 1.00, 2023/06/17
+% Version: 1.01, 2023/07/04
% Documentation: https://ctan.org/pkg/mitthesis
@@ -35,27 +35,27 @@
psi0 = (1/c)*math.exp((kappa*arg0)^2)*(erfc(kappa*arg0)-erfc(arg0))
if option~=[[]] then
- tex.sprint("\\addplot+["..option.."] coordinates{")
- -- addplot+ for color cycle to work
+ tex.sprint("\\addplot+["..option.."] coordinates{")
+ -- addplot+ for color cycle to work
else
- tex.sprint("\\addplot+ coordinates{")
+ tex.sprint("\\addplot+ coordinates{")
end
tex.sprint("("..xMin..","..psi0..")")
for i=1, (npoints-1) do
- x = math.exp(logx + xstep)
+ x = math.exp(logx + xstep)
arg = math.sqrt(x/c)
- karg = kappa*arg
- if karg<5 then
+ karg = kappa*arg
+ if karg<5 then
-- this break compensates for exp(karg^2), which multiplies the error in the erf approximation...
- logpsi = -math.log(croot) + karg^2 + math.log(erfc(karg)-erfc(arg))
- psi = math.exp(logpsi)
- else
- psi = (1/(karg) - 1/(2*(karg^3)) + 3/(4*(arg^5)) )/(1.77245385*croot)
- -- this is the large x asymptote of the reaction rate
- end
- logx = math.log(x)
- tex.sprint("("..x..","..psi..")")
+ logpsi = -math.log(croot) + karg^2 + math.log(erfc(karg)-erfc(arg))
+ psi = math.exp(logpsi)
+ else
+ psi = (1/(karg) - 1/(2*(karg^3)) + 3/(4*(arg^5)) )/(1.77245385*croot)
+ -- this is the large x asymptote of the reaction rate
+ end
+ logx = math.log(x)
+ tex.sprint("("..x..","..psi..")")
end
tex.sprint("}")
end
Modified: trunk/Master/texmf-dist/doc/latex/mitthesis/MIT-thesis-template/chapter1.tex
===================================================================
--- trunk/Master/texmf-dist/doc/latex/mitthesis/MIT-thesis-template/chapter1.tex 2023-07-22 20:19:50 UTC (rev 67707)
+++ trunk/Master/texmf-dist/doc/latex/mitthesis/MIT-thesis-template/chapter1.tex 2023-07-22 20:20:15 UTC (rev 67708)
@@ -1,5 +1,5 @@
% From mitthesis package
-% Version: 1.01, 2023/06/19
+% Version: 1.02, 2023/07/21
% Documentation: https://ctan.org/pkg/mitthesis
@@ -70,7 +70,7 @@
\centering\includegraphics[height=5cm]{example-image-b}
%\includegraphics[scale=0.5]{example-image-c}
%\includegraphics[width=3cm]{example-image}
-\caption{Caption text\label{mantissa-format}}
+\caption{Caption text\label{example-image-b}}
\end{figure}
@@ -160,3 +160,4 @@
\end{tabular*}
}%
\end{table*}
+
Modified: trunk/Master/texmf-dist/doc/latex/mitthesis/README.md
===================================================================
--- trunk/Master/texmf-dist/doc/latex/mitthesis/README.md 2023-07-22 20:19:50 UTC (rev 67707)
+++ trunk/Master/texmf-dist/doc/latex/mitthesis/README.md 2023-07-22 20:20:15 UTC (rev 67708)
@@ -1,7 +1,7 @@
#mitthesis --- A LaTeX template for MIT theses#
- v1.04 dated 2023/07/03.
+ v1.05 dated 2023/07/21
####Overview####
This class provides a LaTeX template for MIT theses formatted according to
@@ -53,6 +53,12 @@
---
####Change log####
+ v1.05 (21 July 2023):
+ - Fix bug in toc page number affecting some lists of figures or tables (note: for backward compatibility, remove code in .tex file around \tableofcontents, \listoffigures, and \listoftables so that your code will match the present version)
+ - Include thesis submission date in abstract, remove previous degrees from abstract page, and allow May for degree month, per MIT Libraries
+ - Fill pdflicenseurl in class file; update a class warning message
+ - Clean-up documentation and code
+
v1.04 (3 July 2023):
- Embed default fontset in class file, in case fontset directory is missing
Modified: trunk/Master/texmf-dist/doc/latex/mitthesis/examples/cover_page_samples/No_cc_license.pdf
===================================================================
(Binary files differ)
Modified: trunk/Master/texmf-dist/doc/latex/mitthesis/examples/cover_page_samples/One_author_one_degree.pdf
===================================================================
(Binary files differ)
Modified: trunk/Master/texmf-dist/doc/latex/mitthesis/examples/cover_page_samples/One_author_two_degrees.pdf
===================================================================
(Binary files differ)
Modified: trunk/Master/texmf-dist/doc/latex/mitthesis/examples/cover_page_samples/One_author_two_degrees_from_one_department.pdf
===================================================================
(Binary files differ)
Modified: trunk/Master/texmf-dist/doc/latex/mitthesis/examples/cover_page_samples/Two_authors_one_degree.pdf
===================================================================
(Binary files differ)
Modified: trunk/Master/texmf-dist/doc/latex/mitthesis/examples/cover_page_samples/Two_authors_two_degrees.pdf
===================================================================
(Binary files differ)
Modified: trunk/Master/texmf-dist/doc/latex/mitthesis/examples/cover_page_samples/latex_sources/No_cc_license.tex
===================================================================
--- trunk/Master/texmf-dist/doc/latex/mitthesis/examples/cover_page_samples/latex_sources/No_cc_license.tex 2023-07-22 20:19:50 UTC (rev 67707)
+++ trunk/Master/texmf-dist/doc/latex/mitthesis/examples/cover_page_samples/latex_sources/No_cc_license.tex 2023-07-22 20:20:15 UTC (rev 67708)
@@ -33,9 +33,8 @@
%%%%%%%%%%% Hyperref setting and metadata %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
+\newcommand*\YourName{John H. Lienhard}% <====== CHANGE TO YOUR NAME !!!
-\def\YourName{John H. Lienhard}% <====== CHANGE TO YOUR NAME !!!
-
\hypersetup{%
%
% Be sure to change the following to your own information! <======== !!!
@@ -43,9 +42,9 @@
pdftitle={MIT thesis template},
pdfkeywords={\YourName, Massachusetts Institute of Technology, MIT},
pdfauthor={\YourName},
+% pdfauthor={{John H. Lienhard, V}},% if you have a comma in your name, surround by {..}
pdfauthortitle={Professor of Mechanical Engineering},
pdfcaptionwriter={\YourName},
-% pdfcaptionwriter={{John H. Lienhard, V}},% if you have a comma in your name, surround by {..}
pdfurl={https://lienhard.mit.edu},
pdfcontactemail={lienhard at mit.edu},
pdfcontactaddress={77 Massachusetts Avenue, Room 3-166},
@@ -57,11 +56,11 @@
pdfsubject={Template for writing MIT theses with the mitthesis class},% briefly state what this document is about
%
colorlinks=true,
- linkcolor=blue,
- citecolor=blue,
- urlcolor=blue,
+ linkcolor=Blue3,% from xcolor package
+ citecolor=Blue3,% from xcolor package
+ urlcolor=violet,% from xcolor package
filecolor=red,
-% anchorcolor=yellow,% not all pdf viewers recognize this field (Firefox does)
+% anchorcolor=yellow,% not all pdf viewers recognize this field (although Firefox does)
% colorscheme=phelype,% overrides link, cite, url, file colors with a preset scheme, through \DocumentMetadata
%
pdfborder={0 0 0},
@@ -73,13 +72,15 @@
pdfdisplaydoctitle=true,
pdfstartview=Fit,
pdfnewwindow=true,
-%
- pdfcopyright={Copyright © \DegreeYear\ by \YourName. \PDFRightsText},% definitions made by class file, don't change
- pdflicenseurl={\CCurl},% definition made by class file, don't change
}
+\AtEndDocument{
+ \hypersetup{pdfcopyright={Copyright © \DegreeYear\ by \YourName. \PDFRightsText},}% 1st and 3rd commands are defined by class file.
+}
%%%%%%%%%%%%%% End preamble %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
+%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
+
\begin{document}
@@ -92,25 +93,30 @@
% note on names: most of the following names are made up; Silas Holman was a professor at MIT in the 19th century.
-\Author{Silas W. Holman}{Department of Physics}%[B.S. Physics, MIT, 1876]
+\Author{Silas W. Holman}{Department of Physics}%[B.S. Physics, MIT, 1876][MBA, Ferengi School of Management, 2022]
%\Author{Luisa Hernández}{Department of Research}[B.S. Mechanical Engineering, UCLA, 2018][M.S. Stellar Interiors, Vulcan Science Academy, 2020][MBA, Ferengi School of Management, 2022]
% Use once for each degree fulfilled by thesis
+% For two degrees from one department, leave the department argument blank for the second degree {}.
\Degree{Bachelor of Science in Physics}{Department of Physics}
+%\Degree{Master of Science in Physics}{}
%\Degree{Bachelor of Science in Mechanical Engineering}{Department of Mechanical Engineering}
% If there is more than one supervisor, use the \Supervisor command for each.
\Supervisor{Edward C. Pickering}{Professor of Physics}
-%\Supervisor{Secunda Castor}{Department of Mechanical Engineering}
+%\Supervisor{Secunda Castor}{Professor of Research}
+%\Supervisor{Quintus Castor}{Professor of Log Dams}
% Professor who formally accepts theses for your department (e.g., the Graduate Officer, Professor Sméagol,...)
% If more than one department, use more than once
-\Acceptor{Primus Castor}{Professor of Wetlands Engineering}{Graduate Officer, First Degree Department}
-%\Acceptor{Tertius Castor}{Professor of Log Dams}{Graduate Officer, Second Degree Department}
+% If you need to reduce vertical space, put the acceptor title in the second argument and leave the third blank {}.
+\Acceptor{Primus Castor}{Professor of Wetlands Engineering}{Undergraduate Officer, Department of Physics}
+%\Acceptor{Tertius Castor}{Professor of Log Dams}{Graduate Officer, Department of Research}
+%\Acceptor{Quarta Castor}{Professor of Lodge Building}{Graduate Officer, Department of Mechanical Engineering}
% If your title page is overflowing (from too many names, degrees, etc.), you can scale
% down the Signature block at the bottom with this command, or use another creative solution...
-%\SignatureBlockSize{\small}
+%\SignatureBlockSize{\small} %\SignatureBlockSize{\footnotesize}
% Usage: \DegreeDate{Month}{year}
% Valid degree months are September, February, or June.
Modified: trunk/Master/texmf-dist/doc/latex/mitthesis/examples/cover_page_samples/latex_sources/One_author_one_degree.tex
===================================================================
--- trunk/Master/texmf-dist/doc/latex/mitthesis/examples/cover_page_samples/latex_sources/One_author_one_degree.tex 2023-07-22 20:19:50 UTC (rev 67707)
+++ trunk/Master/texmf-dist/doc/latex/mitthesis/examples/cover_page_samples/latex_sources/One_author_one_degree.tex 2023-07-22 20:20:15 UTC (rev 67708)
@@ -33,9 +33,8 @@
%%%%%%%%%%% Hyperref setting and metadata %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
+\newcommand*\YourName{John H. Lienhard}% <====== CHANGE TO YOUR NAME !!!
-\def\YourName{John H. Lienhard}% <====== CHANGE TO YOUR NAME !!!
-
\hypersetup{%
%
% Be sure to change the following to your own information! <======== !!!
@@ -43,9 +42,9 @@
pdftitle={MIT thesis template},
pdfkeywords={\YourName, Massachusetts Institute of Technology, MIT},
pdfauthor={\YourName},
+% pdfauthor={{John H. Lienhard, V}},% if you have a comma in your name, surround by {..}
pdfauthortitle={Professor of Mechanical Engineering},
pdfcaptionwriter={\YourName},
-% pdfcaptionwriter={{John H. Lienhard, V}},% if you have a comma in your name, surround by {..}
pdfurl={https://lienhard.mit.edu},
pdfcontactemail={lienhard at mit.edu},
pdfcontactaddress={77 Massachusetts Avenue, Room 3-166},
@@ -57,11 +56,11 @@
pdfsubject={Template for writing MIT theses with the mitthesis class},% briefly state what this document is about
%
colorlinks=true,
- linkcolor=blue,
- citecolor=blue,
- urlcolor=blue,
+ linkcolor=Blue3,% from xcolor package
+ citecolor=Blue3,% from xcolor package
+ urlcolor=violet,% from xcolor package
filecolor=red,
-% anchorcolor=yellow,% not all pdf viewers recognize this field (Firefox does)
+% anchorcolor=yellow,% not all pdf viewers recognize this field (although Firefox does)
% colorscheme=phelype,% overrides link, cite, url, file colors with a preset scheme, through \DocumentMetadata
%
pdfborder={0 0 0},
@@ -73,13 +72,15 @@
pdfdisplaydoctitle=true,
pdfstartview=Fit,
pdfnewwindow=true,
-%
- pdfcopyright={Copyright © \DegreeYear\ by \YourName. \PDFRightsText},% definitions made by class file, don't change
- pdflicenseurl={\CCurl},% definition made by class file, don't change
}
+\AtEndDocument{
+ \hypersetup{pdfcopyright={Copyright © \DegreeYear\ by \YourName. \PDFRightsText},}% 1st and 3rd commands are defined by class file.
+}
%%%%%%%%%%%%%% End preamble %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
+%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
+
\begin{document}
@@ -92,25 +93,30 @@
% note on names: most of the following names are made up; Silas Holman was a professor at MIT in the 19th century.
-\Author{Silas W. Holman}{Department of Physics}%[B.S. Physics, MIT, 1876]
+\Author{Silas W. Holman}{Department of Physics}%[B.S. Physics, MIT, 1876][MBA, Ferengi School of Management, 2022]
%\Author{Luisa Hernández}{Department of Research}[B.S. Mechanical Engineering, UCLA, 2018][M.S. Stellar Interiors, Vulcan Science Academy, 2020][MBA, Ferengi School of Management, 2022]
% Use once for each degree fulfilled by thesis
+% For two degrees from one department, leave the department argument blank for the second degree {}.
\Degree{Bachelor of Science in Physics}{Department of Physics}
+%\Degree{Master of Science in Physics}{}
%\Degree{Bachelor of Science in Mechanical Engineering}{Department of Mechanical Engineering}
% If there is more than one supervisor, use the \Supervisor command for each.
\Supervisor{Edward C. Pickering}{Professor of Physics}
-%\Supervisor{Secunda Castor}{Department of Mechanical Engineering}
+%\Supervisor{Secunda Castor}{Professor of Research}
+%\Supervisor{Quintus Castor}{Professor of Log Dams}
% Professor who formally accepts theses for your department (e.g., the Graduate Officer, Professor Sméagol,...)
% If more than one department, use more than once
-\Acceptor{Primus Castor}{Professor of Wetlands Engineering}{Graduate Officer, First Degree Department}
-%\Acceptor{Tertius Castor}{Professor of Log Dams}{Graduate Officer, Second Degree Department}
+% If you need to reduce vertical space, put the acceptor title in the second argument and leave the third blank {}.
+\Acceptor{Primus Castor}{Professor of Wetlands Engineering}{Undergraduate Officer, Department of Physics}
+%\Acceptor{Tertius Castor}{Professor of Log Dams}{Graduate Officer, Department of Research}
+%\Acceptor{Quarta Castor}{Professor of Lodge Building}{Graduate Officer, Department of Mechanical Engineering}
% If your title page is overflowing (from too many names, degrees, etc.), you can scale
% down the Signature block at the bottom with this command, or use another creative solution...
-%\SignatureBlockSize{\small}
+%\SignatureBlockSize{\small} %\SignatureBlockSize{\footnotesize}
% Usage: \DegreeDate{Month}{year}
% Valid degree months are September, February, or June.
Modified: trunk/Master/texmf-dist/doc/latex/mitthesis/examples/cover_page_samples/latex_sources/One_author_two_degrees.tex
===================================================================
--- trunk/Master/texmf-dist/doc/latex/mitthesis/examples/cover_page_samples/latex_sources/One_author_two_degrees.tex 2023-07-22 20:19:50 UTC (rev 67707)
+++ trunk/Master/texmf-dist/doc/latex/mitthesis/examples/cover_page_samples/latex_sources/One_author_two_degrees.tex 2023-07-22 20:20:15 UTC (rev 67708)
@@ -33,9 +33,8 @@
%%%%%%%%%%% Hyperref setting and metadata %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
+\newcommand*\YourName{John H. Lienhard}% <====== CHANGE TO YOUR NAME !!!
-\def\YourName{John H. Lienhard}% <====== CHANGE TO YOUR NAME !!!
-
\hypersetup{%
%
% Be sure to change the following to your own information! <======== !!!
@@ -43,9 +42,9 @@
pdftitle={MIT thesis template},
pdfkeywords={\YourName, Massachusetts Institute of Technology, MIT},
pdfauthor={\YourName},
+% pdfauthor={{John H. Lienhard, V}},% if you have a comma in your name, surround by {..}
pdfauthortitle={Professor of Mechanical Engineering},
pdfcaptionwriter={\YourName},
-% pdfcaptionwriter={{John H. Lienhard, V}},% if you have a comma in your name, surround by {..}
pdfurl={https://lienhard.mit.edu},
pdfcontactemail={lienhard at mit.edu},
pdfcontactaddress={77 Massachusetts Avenue, Room 3-166},
@@ -57,11 +56,11 @@
pdfsubject={Template for writing MIT theses with the mitthesis class},% briefly state what this document is about
%
colorlinks=true,
- linkcolor=blue,
- citecolor=blue,
- urlcolor=blue,
+ linkcolor=Blue3,% from xcolor package
+ citecolor=Blue3,% from xcolor package
+ urlcolor=violet,% from xcolor package
filecolor=red,
-% anchorcolor=yellow,% not all pdf viewers recognize this field (Firefox does)
+% anchorcolor=yellow,% not all pdf viewers recognize this field (although Firefox does)
% colorscheme=phelype,% overrides link, cite, url, file colors with a preset scheme, through \DocumentMetadata
%
pdfborder={0 0 0},
@@ -73,13 +72,15 @@
pdfdisplaydoctitle=true,
pdfstartview=Fit,
pdfnewwindow=true,
-%
- pdfcopyright={Copyright © \DegreeYear\ by \YourName. \PDFRightsText},% definitions made by class file, don't change
- pdflicenseurl={\CCurl},% definition made by class file, don't change
}
+\AtEndDocument{
+ \hypersetup{pdfcopyright={Copyright © \DegreeYear\ by \YourName. \PDFRightsText},}% 1st and 3rd commands are defined by class file.
+}
%%%%%%%%%%%%%% End preamble %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
+%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
+
\begin{document}
@@ -92,25 +93,31 @@
% note on names: most of the following names are made up; Silas Holman was a professor at MIT in the 19th century.
-\Author{Silas W. Holman}{Department of Physics}%[B.S. Physics, MIT, 1876]
+\Author{Silas W. Holman}{Department of Physics}%[B.S. Physics, MIT, 1876][MBA, Ferengi School of Management, 2022]
%\Author{Luisa Hernández}{Department of Research}[B.S. Mechanical Engineering, UCLA, 2018][M.S. Stellar Interiors, Vulcan Science Academy, 2020][MBA, Ferengi School of Management, 2022]
% Use once for each degree fulfilled by thesis
+% For two degrees from one department, leave the department argument blank for the second degree {}.
\Degree{Bachelor of Science in Physics}{Department of Physics}
+%\Degree{Master of Science in Physics}{}
\Degree{Bachelor of Science in Mechanical Engineering}{Department of Mechanical Engineering}
% If there is more than one supervisor, use the \Supervisor command for each.
\Supervisor{Edward C. Pickering}{Professor of Physics}
-\Supervisor{Secunda Castor}{Department of Mechanical Engineering}
+\Supervisor{Secunda Castor}{Professor of Research}
+%\Supervisor{Quintus Castor}{Professor of Log Dams}
% Professor who formally accepts theses for your department (e.g., the Graduate Officer, Professor Sméagol,...)
% If more than one department, use more than once
-\Acceptor{Primus Castor}{Professor of Wetlands Engineering}{Graduate Officer, First Degree Department}
-\Acceptor{Tertius Castor}{Professor of Log Dams}{Graduate Officer, Second Degree Department}
+% If you need to reduce vertical space, put the acceptor title in the second argument and leave the third blank {}.
+%\Acceptor{Primus Castor}{Professor of Wetlands Engineering}{Graduate Officer, Department of Physics}
+\Acceptor{Qunitus Castor}{Professor of Wetlands Engineering}{Undergraduate Officer, Department of Physics}
+\Acceptor{Tertia Castor}{Professor of Log Dams}{Undergraduate Officer, of Mechanical Engineering}
+%\Acceptor{Quarta Castor}{Professor of Lodge Building}{Graduate Officer, Department of Mechanical Engineering}
% If your title page is overflowing (from too many names, degrees, etc.), you can scale
% down the Signature block at the bottom with this command, or use another creative solution...
-%\SignatureBlockSize{\small}
+%\SignatureBlockSize{\small} %\SignatureBlockSize{\footnotesize}
% Usage: \DegreeDate{Month}{year}
% Valid degree months are September, February, or June.
@@ -120,6 +127,7 @@
\ThesisDate{May 18, 1876}
+
%%%%%% Choose whether to have a CREATIVE COMMONS License %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
%
% If you are using a cc license, put details of your cc license here.
Modified: trunk/Master/texmf-dist/doc/latex/mitthesis/examples/cover_page_samples/latex_sources/One_author_two_degrees_from_one_department.tex
===================================================================
--- trunk/Master/texmf-dist/doc/latex/mitthesis/examples/cover_page_samples/latex_sources/One_author_two_degrees_from_one_department.tex 2023-07-22 20:19:50 UTC (rev 67707)
+++ trunk/Master/texmf-dist/doc/latex/mitthesis/examples/cover_page_samples/latex_sources/One_author_two_degrees_from_one_department.tex 2023-07-22 20:20:15 UTC (rev 67708)
@@ -33,9 +33,8 @@
%%%%%%%%%%% Hyperref setting and metadata %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
+\newcommand*\YourName{John H. Lienhard}% <====== CHANGE TO YOUR NAME !!!
-\def\YourName{John H. Lienhard}% <====== CHANGE TO YOUR NAME !!!
-
\hypersetup{%
%
% Be sure to change the following to your own information! <======== !!!
@@ -43,9 +42,9 @@
pdftitle={MIT thesis template},
pdfkeywords={\YourName, Massachusetts Institute of Technology, MIT},
pdfauthor={\YourName},
+% pdfauthor={{John H. Lienhard, V}},% if you have a comma in your name, surround by {..}
pdfauthortitle={Professor of Mechanical Engineering},
pdfcaptionwriter={\YourName},
-% pdfcaptionwriter={{John H. Lienhard, V}},% if you have a comma in your name, surround by {..}
pdfurl={https://lienhard.mit.edu},
pdfcontactemail={lienhard at mit.edu},
pdfcontactaddress={77 Massachusetts Avenue, Room 3-166},
@@ -57,11 +56,11 @@
pdfsubject={Template for writing MIT theses with the mitthesis class},% briefly state what this document is about
%
colorlinks=true,
- linkcolor=blue,
- citecolor=blue,
- urlcolor=blue,
+ linkcolor=Blue3,% from xcolor package
+ citecolor=Blue3,% from xcolor package
+ urlcolor=violet,% from xcolor package
filecolor=red,
-% anchorcolor=yellow,% not all pdf viewers recognize this field (Firefox does)
+% anchorcolor=yellow,% not all pdf viewers recognize this field (although Firefox does)
% colorscheme=phelype,% overrides link, cite, url, file colors with a preset scheme, through \DocumentMetadata
%
pdfborder={0 0 0},
@@ -73,13 +72,15 @@
pdfdisplaydoctitle=true,
pdfstartview=Fit,
pdfnewwindow=true,
-%
- pdfcopyright={Copyright © \DegreeYear\ by \YourName. \PDFRightsText},% definitions made by class file, don't change
- pdflicenseurl={\CCurl},% definition made by class file, don't change
}
+\AtEndDocument{
+ \hypersetup{pdfcopyright={Copyright © \DegreeYear\ by \YourName. \PDFRightsText},}% 1st and 3rd commands are defined by class file.
+}
%%%%%%%%%%%%%% End preamble %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
+%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
+
\begin{document}
@@ -90,27 +91,32 @@
% \Author{Author full name}{Author department}[Author's first PREVIOUS degree][Author's second PREVIOUS degree][...
% Note that third, fourth, fifth, and sixth arguments are optional [] and may be omitted
-% note on names: most of the following names are made up; Joseph H. Keenan was a 20th century thermodynamicist at MIT.
+% note on names: most of the following names are made up; Silas Holman was a professor at MIT in the 19th century.
-\Author{Jinsoo Kim}{Department of Mechanical Engineering}%[B.S. Physics, MIT, 1876]
+\Author{Silas W. Holman}{Department of Physics}%[B.S. Physics, MIT, 1876][MBA, Ferengi School of Management, 2022]
%\Author{Luisa Hernández}{Department of Research}[B.S. Mechanical Engineering, UCLA, 2018][M.S. Stellar Interiors, Vulcan Science Academy, 2020][MBA, Ferengi School of Management, 2022]
% Use once for each degree fulfilled by thesis
-\Degree{Bachelor of Science in Mechanical Engineering}{Department of Mechanical Engineering}
-\Degree{Master of Science in Mechanical Engineering}{}% <=== NOTE BLANK ARGUMENT!! <======== !!!!! <========== !!!!!
+% For two degrees from one department, leave the department argument blank for the second degree {}.
+\Degree{Bachelor of Science in Physics}{Department of Physics}
+\Degree{Master of Science in Physics}{}
+%\Degree{Bachelor of Science in Mechanical Engineering}{Department of Mechanical Engineering}
% If there is more than one supervisor, use the \Supervisor command for each.
-\Supervisor{Joseph H. Keenan}{Professor of Mechanical Engineering}
-%\Supervisor{Secunda Castor}{Department of Mechanical Engineering}
+\Supervisor{Edward C. Pickering}{Professor of Physics}
+%\Supervisor{Secunda Castor}{Professor of Research}
+%\Supervisor{Quintus Castor}{Professor of Log Dams}
% Professor who formally accepts theses for your department (e.g., the Graduate Officer, Professor Sméagol,...)
% If more than one department, use more than once
-\Acceptor{Primus Castor}{Professor of Wetlands Engineering}{Graduate Officer, Department of Mechanical Engineering}
-%\Acceptor{Tertius Castor}{Professor of Log Dams}{Graduate Officer, Second Degree Department}
+% If you need to reduce vertical space, put the acceptor title in the second argument and leave the third blank {}.
+\Acceptor{Primus Castor}{Professor of Wetlands Engineering}{Undergraduate Officer, Department of Physics}
+%\Acceptor{Tertius Castor}{Professor of Log Dams}{Graduate Officer, Department of Research}
+\Acceptor{Quarta Castor}{Professor of Lodge Building}{Graduate Officer, Department of Physics}
% If your title page is overflowing (from too many names, degrees, etc.), you can scale
% down the Signature block at the bottom with this command, or use another creative solution...
-%\SignatureBlockSize{\small}
+%\SignatureBlockSize{\small} %\SignatureBlockSize{\footnotesize}
% Usage: \DegreeDate{Month}{year}
% Valid degree months are September, February, or June.
Modified: trunk/Master/texmf-dist/doc/latex/mitthesis/examples/cover_page_samples/latex_sources/Two_authors_one_degree.tex
===================================================================
--- trunk/Master/texmf-dist/doc/latex/mitthesis/examples/cover_page_samples/latex_sources/Two_authors_one_degree.tex 2023-07-22 20:19:50 UTC (rev 67707)
+++ trunk/Master/texmf-dist/doc/latex/mitthesis/examples/cover_page_samples/latex_sources/Two_authors_one_degree.tex 2023-07-22 20:20:15 UTC (rev 67708)
@@ -33,9 +33,8 @@
%%%%%%%%%%% Hyperref setting and metadata %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
+\newcommand*\YourName{John H. Lienhard}% <====== CHANGE TO YOUR NAME !!!
-\def\YourName{John H. Lienhard}% <====== CHANGE TO YOUR NAME !!!
-
\hypersetup{%
%
% Be sure to change the following to your own information! <======== !!!
@@ -43,9 +42,9 @@
pdftitle={MIT thesis template},
pdfkeywords={\YourName, Massachusetts Institute of Technology, MIT},
pdfauthor={\YourName},
+% pdfauthor={{John H. Lienhard, V}},% if you have a comma in your name, surround by {..}
pdfauthortitle={Professor of Mechanical Engineering},
pdfcaptionwriter={\YourName},
-% pdfcaptionwriter={{John H. Lienhard, V}},% if you have a comma in your name, surround by {..}
pdfurl={https://lienhard.mit.edu},
pdfcontactemail={lienhard at mit.edu},
pdfcontactaddress={77 Massachusetts Avenue, Room 3-166},
@@ -57,11 +56,11 @@
pdfsubject={Template for writing MIT theses with the mitthesis class},% briefly state what this document is about
%
colorlinks=true,
- linkcolor=blue,
- citecolor=blue,
- urlcolor=blue,
+ linkcolor=Blue3,% from xcolor package
+ citecolor=Blue3,% from xcolor package
+ urlcolor=violet,% from xcolor package
filecolor=red,
-% anchorcolor=yellow,% not all pdf viewers recognize this field (Firefox does)
+% anchorcolor=yellow,% not all pdf viewers recognize this field (although Firefox does)
% colorscheme=phelype,% overrides link, cite, url, file colors with a preset scheme, through \DocumentMetadata
%
pdfborder={0 0 0},
@@ -73,13 +72,15 @@
pdfdisplaydoctitle=true,
pdfstartview=Fit,
pdfnewwindow=true,
-%
- pdfcopyright={Copyright © \DegreeYear\ by \YourName. \PDFRightsText},% definitions made by class file, don't change
- pdflicenseurl={\CCurl},% definition made by class file, don't change
}
+\AtEndDocument{
+ \hypersetup{pdfcopyright={Copyright © \DegreeYear\ by \YourName. \PDFRightsText},}% 1st and 3rd commands are defined by class file.
+}
%%%%%%%%%%%%%% End preamble %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
+%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
+
\begin{document}
@@ -92,25 +93,31 @@
% note on names: most of the following names are made up; Silas Holman was a professor at MIT in the 19th century.
-\Author{Silas W. Holman}{Department of Physics}%[B.S. Physics, MIT, 1876]
+\Author{Silas W. Holman}{Department of Physics}%[B.S. Physics, MIT, 1876][MBA, Ferengi School of Management, 2022]
\Author{Luisa Hernández}{Department of Research}[B.S. Mechanical Engineering, UCLA, 2018][M.S. Stellar Interiors, Vulcan Science Academy, 2020][MBA, Ferengi School of Management, 2022]
% Use once for each degree fulfilled by thesis
+% For two degrees from one department, leave the department argument blank for the second degree {}.
\Degree{Bachelor of Science in Physics}{Department of Physics}
+%\Degree{Master of Science in Physics}{}
%\Degree{Bachelor of Science in Mechanical Engineering}{Department of Mechanical Engineering}
% If there is more than one supervisor, use the \Supervisor command for each.
\Supervisor{Edward C. Pickering}{Professor of Physics}
-%\Supervisor{Secunda Castor}{Department of Mechanical Engineering}
+%\Supervisor{Secunda Castor}{Professor of Research}
+%\Supervisor{Quintus Castor}{Professor of Log Dams}
% Professor who formally accepts theses for your department (e.g., the Graduate Officer, Professor Sméagol,...)
% If more than one department, use more than once
-\Acceptor{Primus Castor}{Professor of Wetlands Engineering}{Graduate Officer, First Degree Department}
-%\Acceptor{Tertius Castor}{Professor of Log Dams}{Graduate Officer, Second Degree Department}
+% If you need to reduce vertical space, put the acceptor title in the second argument and leave the third blank {}.
+%\Acceptor{Primus Castor}{Professor of Wetlands Engineering}{Graduate Officer, Department of Physics}
+\Acceptor{Quintus Castor}{Professor of Wetlands Engineering}{Undergraduate Officer, Department of Physics}
+%\Acceptor{Tertius Castor}{Professor of Log Dams}{Graduate Officer, Department of Research}
+%\Acceptor{Quarta Castor}{Professor of Lodge Building}{Graduate Officer, Department of Mechanical Engineering}
% If your title page is overflowing (from too many names, degrees, etc.), you can scale
% down the Signature block at the bottom with this command, or use another creative solution...
-%\SignatureBlockSize{\small}
+%\SignatureBlockSize{\small} %\SignatureBlockSize{\footnotesize}
% Usage: \DegreeDate{Month}{year}
% Valid degree months are September, February, or June.
Modified: trunk/Master/texmf-dist/doc/latex/mitthesis/examples/cover_page_samples/latex_sources/Two_authors_two_degrees.tex
===================================================================
--- trunk/Master/texmf-dist/doc/latex/mitthesis/examples/cover_page_samples/latex_sources/Two_authors_two_degrees.tex 2023-07-22 20:19:50 UTC (rev 67707)
+++ trunk/Master/texmf-dist/doc/latex/mitthesis/examples/cover_page_samples/latex_sources/Two_authors_two_degrees.tex 2023-07-22 20:20:15 UTC (rev 67708)
@@ -33,9 +33,8 @@
%%%%%%%%%%% Hyperref setting and metadata %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
+\newcommand*\YourName{John H. Lienhard}% <====== CHANGE TO YOUR NAME !!!
-\def\YourName{John H. Lienhard}% <====== CHANGE TO YOUR NAME !!!
-
\hypersetup{%
%
% Be sure to change the following to your own information! <======== !!!
@@ -43,9 +42,9 @@
pdftitle={MIT thesis template},
pdfkeywords={\YourName, Massachusetts Institute of Technology, MIT},
pdfauthor={\YourName},
+% pdfauthor={{John H. Lienhard, V}},% if you have a comma in your name, surround by {..}
pdfauthortitle={Professor of Mechanical Engineering},
pdfcaptionwriter={\YourName},
-% pdfcaptionwriter={{John H. Lienhard, V}},% if you have a comma in your name, surround by {..}
pdfurl={https://lienhard.mit.edu},
pdfcontactemail={lienhard at mit.edu},
pdfcontactaddress={77 Massachusetts Avenue, Room 3-166},
@@ -57,11 +56,11 @@
pdfsubject={Template for writing MIT theses with the mitthesis class},% briefly state what this document is about
%
colorlinks=true,
- linkcolor=blue,
- citecolor=blue,
- urlcolor=blue,
+ linkcolor=Blue3,% from xcolor package
+ citecolor=Blue3,% from xcolor package
+ urlcolor=violet,% from xcolor package
filecolor=red,
-% anchorcolor=yellow,% not all pdf viewers recognize this field (Firefox does)
+% anchorcolor=yellow,% not all pdf viewers recognize this field (although Firefox does)
% colorscheme=phelype,% overrides link, cite, url, file colors with a preset scheme, through \DocumentMetadata
%
pdfborder={0 0 0},
@@ -73,13 +72,15 @@
pdfdisplaydoctitle=true,
pdfstartview=Fit,
pdfnewwindow=true,
-%
- pdfcopyright={Copyright © \DegreeYear\ by \YourName. \PDFRightsText},% definitions made by class file, don't change
- pdflicenseurl={\CCurl},% definition made by class file, don't change
}
+\AtEndDocument{
+ \hypersetup{pdfcopyright={Copyright © \DegreeYear\ by \YourName. \PDFRightsText},}% 1st and 3rd commands are defined by class file.
+}
%%%%%%%%%%%%%% End preamble %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
+%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
+
\begin{document}
@@ -92,27 +93,31 @@
% note on names: most of the following names are made up; Silas Holman was a professor at MIT in the 19th century.
-\Author{Silas W. Holman}{Department of Physics}%[B.S. Physics, MIT, 1876]
-\Author{Aadhya Acharya}{Department of Research}[B.S. Physics, Indian Institute of Science, 2018][M.S. Stellar Interiors, Vulcan Science Academy, 2020]
+\Author{Silas W. Holman}{Department of Physics}%[B.S. Physics, MIT, 1876][MBA, Ferengi School of Management, 2022]
+\Author{Luisa Hernández}{Department of Research}%[B.S. Mechanical Engineering, UCLA, 2018][M.S. Stellar Interiors, Vulcan Science Academy, 2020][MBA, Ferengi School of Management, 2022]
% Use once for each degree fulfilled by thesis
-\Degree{Bachelor of Science in Physics}{Department of Physics}
-\Degree{Bachelor of Science in Mechanical Engineering}{Department of Mechanical Engineering}
+% For two degrees from one department, leave the department argument blank for the second degree {}.
+\Degree{Master of Science in Physics}{Department of Physics}
+%\Degree{Master of Science in Physics}{}
+\Degree{Master of Science in Mechanical Engineering}{Department of Mechanical Engineering}
% If there is more than one supervisor, use the \Supervisor command for each.
\Supervisor{Edward C. Pickering}{Professor of Physics}
-\Supervisor{Secunda Castor}{Department of Mechanical Engineering}
+\Supervisor{Secunda Castor}{Professor of Research}
+%\Supervisor{Quintus Castor}{Professor of Log Dams}
% Professor who formally accepts theses for your department (e.g., the Graduate Officer, Professor Sméagol,...)
% If more than one department, use more than once
-\Acceptor{Primus Castor}{Graduate Officer, First Degree Department}{}
-\Acceptor{Tertius Castor}{Graduate Officer, Second Degree Department}{}
+% If you need to reduce vertical space, put the acceptor title in the second argument and leave the third blank {}.
+\Acceptor{Primus Castor}{Professor of Wetlands Engineering}{Graduate Officer, Department of Physics}
+\Acceptor{Tertius Castor}{Professor of Log Dams}{Graduate Officer, Department of Mechanical Engineering}
+%\Acceptor{Quarta Castor}{Professor of Lodge Building}{Undergraduate Officer, Department of Mechanical Engineering}
% If your title page is overflowing (from too many names, degrees, etc.), you can scale
% down the Signature block at the bottom with this command, or use another creative solution...
+\SignatureBlockSize{\small} %\SignatureBlockSize{\footnotesize}
-\SignatureBlockSize{\small}% could do \footnotesize here if desired!
-
% Usage: \DegreeDate{Month}{year}
% Valid degree months are September, February, or June.
\DegreeDate{June}{1876}
@@ -121,6 +126,7 @@
\ThesisDate{May 18, 1876}
+
%%%%%% Choose whether to have a CREATIVE COMMONS License %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
%
% If you are using a cc license, put details of your cc license here.
Modified: trunk/Master/texmf-dist/doc/latex/mitthesis/examples/font_samples/Defaultfonts.pdf
===================================================================
(Binary files differ)
Modified: trunk/Master/texmf-dist/doc/latex/mitthesis/examples/font_samples/Fira_Newtxsf.pdf
===================================================================
(Binary files differ)
Modified: trunk/Master/texmf-dist/doc/latex/mitthesis/examples/font_samples/Heros-Stix2.pdf
===================================================================
(Binary files differ)
Modified: trunk/Master/texmf-dist/doc/latex/mitthesis/examples/font_samples/Libertine.pdf
===================================================================
(Binary files differ)
Modified: trunk/Master/texmf-dist/doc/latex/mitthesis/examples/font_samples/Lucida.pdf
===================================================================
(Binary files differ)
Modified: trunk/Master/texmf-dist/doc/latex/mitthesis/examples/font_samples/Newtx-sans-text.pdf
===================================================================
(Binary files differ)
Modified: trunk/Master/texmf-dist/doc/latex/mitthesis/examples/font_samples/Newtx.pdf
===================================================================
(Binary files differ)
Modified: trunk/Master/texmf-dist/doc/latex/mitthesis/examples/font_samples/Stix2.pdf
===================================================================
(Binary files differ)
Modified: trunk/Master/texmf-dist/doc/latex/mitthesis/examples/font_samples/Termes-Stix2.pdf
===================================================================
(Binary files differ)
Modified: trunk/Master/texmf-dist/doc/latex/mitthesis/examples/font_samples/Termes.pdf
===================================================================
(Binary files differ)
Modified: trunk/Master/texmf-dist/doc/latex/mitthesis/examples/font_samples/latex_sources/Defaultfonts.tex
===================================================================
--- trunk/Master/texmf-dist/doc/latex/mitthesis/examples/font_samples/latex_sources/Defaultfonts.tex 2023-07-22 20:19:50 UTC (rev 67707)
+++ trunk/Master/texmf-dist/doc/latex/mitthesis/examples/font_samples/latex_sources/Defaultfonts.tex 2023-07-22 20:20:15 UTC (rev 67708)
@@ -3,7 +3,7 @@
% !BIB program = biber
% This file is MIT-Thesis.tex, a template for producing MIT theses with the mitthesis class.
-% Version: 1.00, 2023/06/17
+% Version: 1.01, 2023/07/21
% Author: John H. Lienhard (c) 2023. Reuse under the MIT license: https://ctan.org/license/mit
% Documentation: https://ctan.org/pkg/mitthesis
@@ -115,9 +115,8 @@
%%%%%%%%%%% Hyperref setting and metadata %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
+\newcommand*\YourName{John H. Lienhard}% <====== CHANGE TO YOUR NAME !!!
-\def\YourName{John H. Lienhard}% <====== CHANGE TO YOUR NAME !!!
-
\hypersetup{%
%
% Be sure to change the following to your own information! <======== !!!
@@ -125,9 +124,9 @@
pdftitle={MIT thesis template},
pdfkeywords={\YourName, Massachusetts Institute of Technology, MIT},
pdfauthor={\YourName},
+% pdfauthor={{John H. Lienhard, V}},% if you have a comma in your name, surround by {..}
pdfauthortitle={Professor of Mechanical Engineering},
pdfcaptionwriter={\YourName},
-% pdfcaptionwriter={{John H. Lienhard, V}},% if you have a comma in your name, surround by {..}
pdfurl={https://lienhard.mit.edu},
pdfcontactemail={lienhard at mit.edu},
pdfcontactaddress={77 Massachusetts Avenue, Room 3-166},
@@ -139,11 +138,11 @@
pdfsubject={Template for writing MIT theses with the mitthesis class},% briefly state what this document is about
%
colorlinks=true,
- linkcolor=blue,
- citecolor=blue,
- urlcolor=violet,
+ linkcolor=Blue3,% from xcolor package
+ citecolor=Blue3,% from xcolor package
+ urlcolor=violet,% from xcolor package
filecolor=red,
-% anchorcolor=yellow,% not all pdf viewers recognize this field (Firefox does)
+% anchorcolor=yellow,% not all pdf viewers recognize this field (although Firefox does)
% colorscheme=phelype,% overrides link, cite, url, file colors with a preset scheme, through \DocumentMetadata
%
pdfborder={0 0 0},
@@ -155,10 +154,10 @@
pdfdisplaydoctitle=true,
pdfstartview=Fit,
pdfnewwindow=true,
-%
- pdfcopyright={Copyright © \DegreeYear\ by \YourName. \PDFRightsText},% definitions made by class file, don't change
- pdflicenseurl={\CCurl},% definition made by class file, don't change
}
+\AtEndDocument{
+ \hypersetup{pdfcopyright={Copyright © \DegreeYear\ by \YourName. \PDFRightsText},}% 1st and 3rd commands are defined by class file.
+}
%%%%%%%%%%%%%% End preamble %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
@@ -190,7 +189,7 @@
% Professor who formally accepts theses for your department (e.g., the Graduate Officer, Professor Sméagol,...)
% If more than one department, use more than once
-\Acceptor{Primus Castor}{Professor of Wetlands Engineering}{Graduate Officer, First Degree Department}
+\Acceptor{Primus Castor}{Professor of Wetlands Engineering}{Undergraduate Officer, Department of Physics}
%\Acceptor{Tertius Castor}{Professor of Log Dams}{Graduate Officer, Second Degree Department}
% If your title page is overflowing (from too many names, degrees, etc.), you can scale
@@ -244,19 +243,9 @@
%%% Table of contents and lists of stuff (edit only if you want different lists) %%%%%%%%%%%%%%%%
- \pdfbookmark[0]{Table of Contents}{toc}%
\tableofcontents
- \cleardoublepage
-
- \phantomsection
\listoffigures
- \addcontentsline{toc}{chapter}{\protect\textbf{\listfigurename}}%
- \cleardoublepage
-
- \phantomsection
\listoftables
- \addcontentsline{toc}{chapter}{\protect\textbf{\listtablename}}%
- \cleardoublepage
%%% Chapters of thesis %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
Modified: trunk/Master/texmf-dist/doc/latex/mitthesis/examples/font_samples/latex_sources/Fira_Newtxsf.tex
===================================================================
--- trunk/Master/texmf-dist/doc/latex/mitthesis/examples/font_samples/latex_sources/Fira_Newtxsf.tex 2023-07-22 20:19:50 UTC (rev 67707)
+++ trunk/Master/texmf-dist/doc/latex/mitthesis/examples/font_samples/latex_sources/Fira_Newtxsf.tex 2023-07-22 20:20:15 UTC (rev 67708)
@@ -3,7 +3,7 @@
% !BIB program = biber
% This file is MIT-Thesis.tex, a template for producing MIT theses with the mitthesis class.
-% Version: 1.00, 2023/06/17
+% Version: 1.01, 2023/07/21
% Author: John H. Lienhard (c) 2023. Reuse under the MIT license: https://ctan.org/license/mit
% Documentation: https://ctan.org/pkg/mitthesis
@@ -115,9 +115,8 @@
%%%%%%%%%%% Hyperref setting and metadata %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
+\newcommand*\YourName{John H. Lienhard}% <====== CHANGE TO YOUR NAME !!!
-\def\YourName{John H. Lienhard}% <====== CHANGE TO YOUR NAME !!!
-
\hypersetup{%
%
% Be sure to change the following to your own information! <======== !!!
@@ -125,9 +124,9 @@
pdftitle={MIT thesis template},
pdfkeywords={\YourName, Massachusetts Institute of Technology, MIT},
pdfauthor={\YourName},
+% pdfauthor={{John H. Lienhard, V}},% if you have a comma in your name, surround by {..}
pdfauthortitle={Professor of Mechanical Engineering},
pdfcaptionwriter={\YourName},
-% pdfcaptionwriter={{John H. Lienhard, V}},% if you have a comma in your name, surround by {..}
pdfurl={https://lienhard.mit.edu},
pdfcontactemail={lienhard at mit.edu},
pdfcontactaddress={77 Massachusetts Avenue, Room 3-166},
@@ -139,11 +138,11 @@
pdfsubject={Template for writing MIT theses with the mitthesis class},% briefly state what this document is about
%
colorlinks=true,
- linkcolor=blue,
- citecolor=blue,
- urlcolor=violet,
+ linkcolor=Blue3,% from xcolor package
+ citecolor=Blue3,% from xcolor package
+ urlcolor=violet,% from xcolor package
filecolor=red,
-% anchorcolor=yellow,% not all pdf viewers recognize this field (Firefox does)
+% anchorcolor=yellow,% not all pdf viewers recognize this field (although Firefox does)
% colorscheme=phelype,% overrides link, cite, url, file colors with a preset scheme, through \DocumentMetadata
%
pdfborder={0 0 0},
@@ -155,10 +154,10 @@
pdfdisplaydoctitle=true,
pdfstartview=Fit,
pdfnewwindow=true,
-%
- pdfcopyright={Copyright © \DegreeYear\ by \YourName. \PDFRightsText},% definitions made by class file, don't change
- pdflicenseurl={\CCurl},% definition made by class file, don't change
}
+\AtEndDocument{
+ \hypersetup{pdfcopyright={Copyright © \DegreeYear\ by \YourName. \PDFRightsText},}% 1st and 3rd commands are defined by class file.
+}
%%%%%%%%%%%%%% End preamble %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
@@ -190,7 +189,7 @@
% Professor who formally accepts theses for your department (e.g., the Graduate Officer, Professor Sméagol,...)
% If more than one department, use more than once
-\Acceptor{Primus Castor}{Professor of Wetlands Engineering}{Graduate Officer, First Degree Department}
+\Acceptor{Primus Castor}{Professor of Wetlands Engineering}{Undergraduate Officer, Department of Physics}
%\Acceptor{Tertius Castor}{Professor of Log Dams}{Graduate Officer, Second Degree Department}
% If your title page is overflowing (from too many names, degrees, etc.), you can scale
@@ -244,19 +243,9 @@
%%% Table of contents and lists of stuff (edit only if you want different lists) %%%%%%%%%%%%%%%%
- \pdfbookmark[0]{Table of Contents}{toc}%
\tableofcontents
- \cleardoublepage
-
- \phantomsection
\listoffigures
- \addcontentsline{toc}{chapter}{\protect\textbf{\listfigurename}}%
- \cleardoublepage
-
- \phantomsection
\listoftables
- \addcontentsline{toc}{chapter}{\protect\textbf{\listtablename}}%
- \cleardoublepage
%%% Chapters of thesis %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
Modified: trunk/Master/texmf-dist/doc/latex/mitthesis/examples/font_samples/latex_sources/Heros-Stix2.tex
===================================================================
--- trunk/Master/texmf-dist/doc/latex/mitthesis/examples/font_samples/latex_sources/Heros-Stix2.tex 2023-07-22 20:19:50 UTC (rev 67707)
+++ trunk/Master/texmf-dist/doc/latex/mitthesis/examples/font_samples/latex_sources/Heros-Stix2.tex 2023-07-22 20:20:15 UTC (rev 67708)
@@ -3,7 +3,7 @@
% !BIB program = biber
% This file is MIT-Thesis.tex, a template for producing MIT theses with the mitthesis class.
-% Version: 1.00, 2023/06/17
+% Version: 1.01, 2023/07/21
% Author: John H. Lienhard (c) 2023. Reuse under the MIT license: https://ctan.org/license/mit
% Documentation: https://ctan.org/pkg/mitthesis
@@ -115,9 +115,8 @@
%%%%%%%%%%% Hyperref setting and metadata %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
+\newcommand*\YourName{John H. Lienhard}% <====== CHANGE TO YOUR NAME !!!
-\def\YourName{John H. Lienhard}% <====== CHANGE TO YOUR NAME !!!
-
\hypersetup{%
%
% Be sure to change the following to your own information! <======== !!!
@@ -125,9 +124,9 @@
pdftitle={MIT thesis template},
pdfkeywords={\YourName, Massachusetts Institute of Technology, MIT},
pdfauthor={\YourName},
+% pdfauthor={{John H. Lienhard, V}},% if you have a comma in your name, surround by {..}
pdfauthortitle={Professor of Mechanical Engineering},
pdfcaptionwriter={\YourName},
-% pdfcaptionwriter={{John H. Lienhard, V}},% if you have a comma in your name, surround by {..}
pdfurl={https://lienhard.mit.edu},
pdfcontactemail={lienhard at mit.edu},
pdfcontactaddress={77 Massachusetts Avenue, Room 3-166},
@@ -139,11 +138,11 @@
pdfsubject={Template for writing MIT theses with the mitthesis class},% briefly state what this document is about
%
colorlinks=true,
- linkcolor=blue,
- citecolor=blue,
- urlcolor=violet,
+ linkcolor=Blue3,% from xcolor package
+ citecolor=Blue3,% from xcolor package
+ urlcolor=violet,% from xcolor package
filecolor=red,
-% anchorcolor=yellow,% not all pdf viewers recognize this field (Firefox does)
+% anchorcolor=yellow,% not all pdf viewers recognize this field (although Firefox does)
% colorscheme=phelype,% overrides link, cite, url, file colors with a preset scheme, through \DocumentMetadata
%
pdfborder={0 0 0},
@@ -155,16 +154,15 @@
pdfdisplaydoctitle=true,
pdfstartview=Fit,
pdfnewwindow=true,
-%
- pdfcopyright={Copyright © \DegreeYear\ by \YourName. \PDFRightsText},% definitions made by class file, don't change
- pdflicenseurl={\CCurl},% definition made by class file, don't change
}
+\AtEndDocument{
+ \hypersetup{pdfcopyright={Copyright © \DegreeYear\ by \YourName. \PDFRightsText},}% 1st and 3rd commands are defined by class file.
+}
%%%%%%%%%%%%%% End preamble %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
-
\begin{document}
@@ -177,25 +175,30 @@
% note on names: most of the following names are made up; Silas Holman was a professor at MIT in the 19th century.
-\Author{Silas W. Holman}{Department of Physics}%[B.S. Physics, MIT, 1876]
+\Author{Silas W. Holman}{Department of Physics}%[B.S. Physics, MIT, 1876][MBA, Ferengi School of Management, 2022]
%\Author{Luisa Hernández}{Department of Research}[B.S. Mechanical Engineering, UCLA, 2018][M.S. Stellar Interiors, Vulcan Science Academy, 2020][MBA, Ferengi School of Management, 2022]
% Use once for each degree fulfilled by thesis
+% For two degrees from one department, leave the department argument blank for the second degree {}.
\Degree{Bachelor of Science in Physics}{Department of Physics}
+%\Degree{Master of Science in Physics}{}
%\Degree{Bachelor of Science in Mechanical Engineering}{Department of Mechanical Engineering}
% If there is more than one supervisor, use the \Supervisor command for each.
\Supervisor{Edward C. Pickering}{Professor of Physics}
-%\Supervisor{Secunda Castor}{Department of Mechanical Engineering}
+%\Supervisor{Secunda Castor}{Professor of Research}
+%\Supervisor{Quintus Castor}{Professor of Log Dams}
% Professor who formally accepts theses for your department (e.g., the Graduate Officer, Professor Sméagol,...)
% If more than one department, use more than once
-\Acceptor{Primus Castor}{Professor of Wetlands Engineering}{Graduate Officer, First Degree Department}
-%\Acceptor{Tertius Castor}{Professor of Log Dams}{Graduate Officer, Second Degree Department}
+% If you need to reduce vertical space, put the acceptor title in the second argument and leave the third blank {}.
+\Acceptor{Primus Castor}{Professor of Wetlands Engineering}{Undergraduate Officer, Department of Physics}
+%\Acceptor{Tertius Castor}{Professor of Log Dams}{Graduate Officer, Department of Research}
+%\Acceptor{Quarta Castor}{Professor of Lodge Building}{Graduate Officer, Department of Mechanical Engineering}
% If your title page is overflowing (from too many names, degrees, etc.), you can scale
% down the Signature block at the bottom with this command, or use another creative solution...
-%\SignatureBlockSize{\small}
+%\SignatureBlockSize{\small} %\SignatureBlockSize{\footnotesize}
% Usage: \DegreeDate{Month}{year}
% Valid degree months are September, February, or June.
@@ -242,21 +245,11 @@
\cleardoublepage
-%%% Table of contents and lists of stuff (edit only if you want different lists) %%%%%%%%%%%%%%%%
+%%% Table of contents and lists of stuff (delete lists you don't need, e.g., if no tables) %%%%%%%%
- \pdfbookmark[0]{Table of Contents}{toc}%
\tableofcontents
- \cleardoublepage
-
- \phantomsection
\listoffigures
- \addcontentsline{toc}{chapter}{\protect\textbf{\listfigurename}}%
- \cleardoublepage
-
- \phantomsection
\listoftables
- \addcontentsline{toc}{chapter}{\protect\textbf{\listtablename}}%
- \cleardoublepage
%%% Chapters of thesis %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
Modified: trunk/Master/texmf-dist/doc/latex/mitthesis/examples/font_samples/latex_sources/Libertine.tex
===================================================================
--- trunk/Master/texmf-dist/doc/latex/mitthesis/examples/font_samples/latex_sources/Libertine.tex 2023-07-22 20:19:50 UTC (rev 67707)
+++ trunk/Master/texmf-dist/doc/latex/mitthesis/examples/font_samples/latex_sources/Libertine.tex 2023-07-22 20:20:15 UTC (rev 67708)
@@ -3,7 +3,7 @@
% !BIB program = biber
% This file is MIT-Thesis.tex, a template for producing MIT theses with the mitthesis class.
-% Version: 1.00, 2023/06/17
+% Version: 1.01, 2023/07/21
% Author: John H. Lienhard (c) 2023. Reuse under the MIT license: https://ctan.org/license/mit
% Documentation: https://ctan.org/pkg/mitthesis
@@ -115,9 +115,8 @@
%%%%%%%%%%% Hyperref setting and metadata %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
+\newcommand*\YourName{John H. Lienhard}% <====== CHANGE TO YOUR NAME !!!
-\def\YourName{John H. Lienhard}% <====== CHANGE TO YOUR NAME !!!
-
\hypersetup{%
%
% Be sure to change the following to your own information! <======== !!!
@@ -125,9 +124,9 @@
pdftitle={MIT thesis template},
pdfkeywords={\YourName, Massachusetts Institute of Technology, MIT},
pdfauthor={\YourName},
+% pdfauthor={{John H. Lienhard, V}},% if you have a comma in your name, surround by {..}
pdfauthortitle={Professor of Mechanical Engineering},
pdfcaptionwriter={\YourName},
-% pdfcaptionwriter={{John H. Lienhard, V}},% if you have a comma in your name, surround by {..}
pdfurl={https://lienhard.mit.edu},
pdfcontactemail={lienhard at mit.edu},
pdfcontactaddress={77 Massachusetts Avenue, Room 3-166},
@@ -139,11 +138,11 @@
pdfsubject={Template for writing MIT theses with the mitthesis class},% briefly state what this document is about
%
colorlinks=true,
- linkcolor=blue,
- citecolor=blue,
- urlcolor=violet,
+ linkcolor=Blue3,% from xcolor package
+ citecolor=Blue3,% from xcolor package
+ urlcolor=violet,% from xcolor package
filecolor=red,
-% anchorcolor=yellow,% not all pdf viewers recognize this field (Firefox does)
+% anchorcolor=yellow,% not all pdf viewers recognize this field (although Firefox does)
% colorscheme=phelype,% overrides link, cite, url, file colors with a preset scheme, through \DocumentMetadata
%
pdfborder={0 0 0},
@@ -155,16 +154,15 @@
pdfdisplaydoctitle=true,
pdfstartview=Fit,
pdfnewwindow=true,
-%
- pdfcopyright={Copyright © \DegreeYear\ by \YourName. \PDFRightsText},% definitions made by class file, don't change
- pdflicenseurl={\CCurl},% definition made by class file, don't change
}
+\AtEndDocument{
+ \hypersetup{pdfcopyright={Copyright © \DegreeYear\ by \YourName. \PDFRightsText},}% 1st and 3rd commands are defined by class file.
+}
%%%%%%%%%%%%%% End preamble %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
-
\begin{document}
@@ -177,25 +175,30 @@
% note on names: most of the following names are made up; Silas Holman was a professor at MIT in the 19th century.
-\Author{Silas W. Holman}{Department of Physics}%[B.S. Physics, MIT, 1876]
+\Author{Silas W. Holman}{Department of Physics}%[B.S. Physics, MIT, 1876][MBA, Ferengi School of Management, 2022]
%\Author{Luisa Hernández}{Department of Research}[B.S. Mechanical Engineering, UCLA, 2018][M.S. Stellar Interiors, Vulcan Science Academy, 2020][MBA, Ferengi School of Management, 2022]
% Use once for each degree fulfilled by thesis
+% For two degrees from one department, leave the department argument blank for the second degree {}.
\Degree{Bachelor of Science in Physics}{Department of Physics}
+%\Degree{Master of Science in Physics}{}
%\Degree{Bachelor of Science in Mechanical Engineering}{Department of Mechanical Engineering}
% If there is more than one supervisor, use the \Supervisor command for each.
\Supervisor{Edward C. Pickering}{Professor of Physics}
-%\Supervisor{Secunda Castor}{Department of Mechanical Engineering}
+%\Supervisor{Secunda Castor}{Professor of Research}
+%\Supervisor{Quintus Castor}{Professor of Log Dams}
% Professor who formally accepts theses for your department (e.g., the Graduate Officer, Professor Sméagol,...)
% If more than one department, use more than once
-\Acceptor{Primus Castor}{Professor of Wetlands Engineering}{Graduate Officer, First Degree Department}
-%\Acceptor{Tertius Castor}{Professor of Log Dams}{Graduate Officer, Second Degree Department}
+% If you need to reduce vertical space, put the acceptor title in the second argument and leave the third blank {}.
+\Acceptor{Primus Castor}{Professor of Wetlands Engineering}{Undergraduate Officer, Department of Physics}
+%\Acceptor{Tertius Castor}{Professor of Log Dams}{Graduate Officer, Department of Research}
+%\Acceptor{Quarta Castor}{Professor of Lodge Building}{Graduate Officer, Department of Mechanical Engineering}
% If your title page is overflowing (from too many names, degrees, etc.), you can scale
% down the Signature block at the bottom with this command, or use another creative solution...
-%\SignatureBlockSize{\small}
+%\SignatureBlockSize{\small} %\SignatureBlockSize{\footnotesize}
% Usage: \DegreeDate{Month}{year}
% Valid degree months are September, February, or June.
@@ -242,21 +245,11 @@
\cleardoublepage
-%%% Table of contents and lists of stuff (edit only if you want different lists) %%%%%%%%%%%%%%%%
+%%% Table of contents and lists of stuff (delete lists you don't need, e.g., if no tables) %%%%%%%%
- \pdfbookmark[0]{Table of Contents}{toc}%
\tableofcontents
- \cleardoublepage
-
- \phantomsection
\listoffigures
- \addcontentsline{toc}{chapter}{\protect\textbf{\listfigurename}}%
- \cleardoublepage
-
- \phantomsection
\listoftables
- \addcontentsline{toc}{chapter}{\protect\textbf{\listtablename}}%
- \cleardoublepage
%%% Chapters of thesis %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
Modified: trunk/Master/texmf-dist/doc/latex/mitthesis/examples/font_samples/latex_sources/Lucida.tex
===================================================================
--- trunk/Master/texmf-dist/doc/latex/mitthesis/examples/font_samples/latex_sources/Lucida.tex 2023-07-22 20:19:50 UTC (rev 67707)
+++ trunk/Master/texmf-dist/doc/latex/mitthesis/examples/font_samples/latex_sources/Lucida.tex 2023-07-22 20:20:15 UTC (rev 67708)
@@ -3,7 +3,7 @@
% !BIB program = biber
% This file is MIT-Thesis.tex, a template for producing MIT theses with the mitthesis class.
-% Version: 1.00, 2023/06/17
+% Version: 1.01, 2023/07/21
% Author: John H. Lienhard (c) 2023. Reuse under the MIT license: https://ctan.org/license/mit
% Documentation: https://ctan.org/pkg/mitthesis
@@ -115,9 +115,8 @@
%%%%%%%%%%% Hyperref setting and metadata %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
+\newcommand*\YourName{John H. Lienhard}% <====== CHANGE TO YOUR NAME !!!
-\def\YourName{John H. Lienhard}% <====== CHANGE TO YOUR NAME !!!
-
\hypersetup{%
%
% Be sure to change the following to your own information! <======== !!!
@@ -125,9 +124,9 @@
pdftitle={MIT thesis template},
pdfkeywords={\YourName, Massachusetts Institute of Technology, MIT},
pdfauthor={\YourName},
+% pdfauthor={{John H. Lienhard, V}},% if you have a comma in your name, surround by {..}
pdfauthortitle={Professor of Mechanical Engineering},
pdfcaptionwriter={\YourName},
-% pdfcaptionwriter={{John H. Lienhard, V}},% if you have a comma in your name, surround by {..}
pdfurl={https://lienhard.mit.edu},
pdfcontactemail={lienhard at mit.edu},
pdfcontactaddress={77 Massachusetts Avenue, Room 3-166},
@@ -139,11 +138,11 @@
pdfsubject={Template for writing MIT theses with the mitthesis class},% briefly state what this document is about
%
colorlinks=true,
- linkcolor=blue,
- citecolor=blue,
- urlcolor=violet,
+ linkcolor=Blue3,% from xcolor package
+ citecolor=Blue3,% from xcolor package
+ urlcolor=violet,% from xcolor package
filecolor=red,
-% anchorcolor=yellow,% not all pdf viewers recognize this field (Firefox does)
+% anchorcolor=yellow,% not all pdf viewers recognize this field (although Firefox does)
% colorscheme=phelype,% overrides link, cite, url, file colors with a preset scheme, through \DocumentMetadata
%
pdfborder={0 0 0},
@@ -155,16 +154,15 @@
pdfdisplaydoctitle=true,
pdfstartview=Fit,
pdfnewwindow=true,
-%
- pdfcopyright={Copyright © \DegreeYear\ by \YourName. \PDFRightsText},% definitions made by class file, don't change
- pdflicenseurl={\CCurl},% definition made by class file, don't change
}
+\AtEndDocument{
+ \hypersetup{pdfcopyright={Copyright © \DegreeYear\ by \YourName. \PDFRightsText},}% 1st and 3rd commands are defined by class file.
+}
%%%%%%%%%%%%%% End preamble %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
-
\begin{document}
@@ -177,25 +175,30 @@
% note on names: most of the following names are made up; Silas Holman was a professor at MIT in the 19th century.
-\Author{Silas W. Holman}{Department of Physics}%[B.S. Physics, MIT, 1876]
+\Author{Silas W. Holman}{Department of Physics}%[B.S. Physics, MIT, 1876][MBA, Ferengi School of Management, 2022]
%\Author{Luisa Hernández}{Department of Research}[B.S. Mechanical Engineering, UCLA, 2018][M.S. Stellar Interiors, Vulcan Science Academy, 2020][MBA, Ferengi School of Management, 2022]
% Use once for each degree fulfilled by thesis
+% For two degrees from one department, leave the department argument blank for the second degree {}.
\Degree{Bachelor of Science in Physics}{Department of Physics}
+%\Degree{Master of Science in Physics}{}
%\Degree{Bachelor of Science in Mechanical Engineering}{Department of Mechanical Engineering}
% If there is more than one supervisor, use the \Supervisor command for each.
\Supervisor{Edward C. Pickering}{Professor of Physics}
-%\Supervisor{Secunda Castor}{Department of Mechanical Engineering}
+%\Supervisor{Secunda Castor}{Professor of Research}
+%\Supervisor{Quintus Castor}{Professor of Log Dams}
% Professor who formally accepts theses for your department (e.g., the Graduate Officer, Professor Sméagol,...)
% If more than one department, use more than once
-\Acceptor{Primus Castor}{Professor of Wetlands Engineering}{Graduate Officer, First Degree Department}
-%\Acceptor{Tertius Castor}{Professor of Log Dams}{Graduate Officer, Second Degree Department}
+% If you need to reduce vertical space, put the acceptor title in the second argument and leave the third blank {}.
+\Acceptor{Primus Castor}{Professor of Wetlands Engineering}{Undergraduate Officer, Department of Physics}
+%\Acceptor{Tertius Castor}{Professor of Log Dams}{Graduate Officer, Department of Research}
+%\Acceptor{Quarta Castor}{Professor of Lodge Building}{Graduate Officer, Department of Mechanical Engineering}
% If your title page is overflowing (from too many names, degrees, etc.), you can scale
% down the Signature block at the bottom with this command, or use another creative solution...
-%\SignatureBlockSize{\small}
+%\SignatureBlockSize{\small} %\SignatureBlockSize{\footnotesize}
% Usage: \DegreeDate{Month}{year}
% Valid degree months are September, February, or June.
@@ -242,21 +245,11 @@
\cleardoublepage
-%%% Table of contents and lists of stuff (edit only if you want different lists) %%%%%%%%%%%%%%%%
+%%% Table of contents and lists of stuff (delete lists you don't need, e.g., if no tables) %%%%%%%%
- \pdfbookmark[0]{Table of Contents}{toc}%
\tableofcontents
- \cleardoublepage
-
- \phantomsection
\listoffigures
- \addcontentsline{toc}{chapter}{\protect\textbf{\listfigurename}}%
- \cleardoublepage
-
- \phantomsection
\listoftables
- \addcontentsline{toc}{chapter}{\protect\textbf{\listtablename}}%
- \cleardoublepage
%%% Chapters of thesis %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
Modified: trunk/Master/texmf-dist/doc/latex/mitthesis/examples/font_samples/latex_sources/Newtx-sans-text.tex
===================================================================
--- trunk/Master/texmf-dist/doc/latex/mitthesis/examples/font_samples/latex_sources/Newtx-sans-text.tex 2023-07-22 20:19:50 UTC (rev 67707)
+++ trunk/Master/texmf-dist/doc/latex/mitthesis/examples/font_samples/latex_sources/Newtx-sans-text.tex 2023-07-22 20:20:15 UTC (rev 67708)
@@ -3,7 +3,7 @@
% !BIB program = biber
% This file is MIT-Thesis.tex, a template for producing MIT theses with the mitthesis class.
-% Version: 1.00, 2023/06/17
+% Version: 1.01, 2023/07/21
% Author: John H. Lienhard (c) 2023. Reuse under the MIT license: https://ctan.org/license/mit
% Documentation: https://ctan.org/pkg/mitthesis
@@ -115,9 +115,8 @@
%%%%%%%%%%% Hyperref setting and metadata %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
+\newcommand*\YourName{John H. Lienhard}% <====== CHANGE TO YOUR NAME !!!
-\def\YourName{John H. Lienhard}% <====== CHANGE TO YOUR NAME !!!
-
\hypersetup{%
%
% Be sure to change the following to your own information! <======== !!!
@@ -125,9 +124,9 @@
pdftitle={MIT thesis template},
pdfkeywords={\YourName, Massachusetts Institute of Technology, MIT},
pdfauthor={\YourName},
+% pdfauthor={{John H. Lienhard, V}},% if you have a comma in your name, surround by {..}
pdfauthortitle={Professor of Mechanical Engineering},
pdfcaptionwriter={\YourName},
-% pdfcaptionwriter={{John H. Lienhard, V}},% if you have a comma in your name, surround by {..}
pdfurl={https://lienhard.mit.edu},
pdfcontactemail={lienhard at mit.edu},
pdfcontactaddress={77 Massachusetts Avenue, Room 3-166},
@@ -139,11 +138,11 @@
pdfsubject={Template for writing MIT theses with the mitthesis class},% briefly state what this document is about
%
colorlinks=true,
- linkcolor=blue,
- citecolor=blue,
- urlcolor=violet,
+ linkcolor=Blue3,% from xcolor package
+ citecolor=Blue3,% from xcolor package
+ urlcolor=violet,% from xcolor package
filecolor=red,
-% anchorcolor=yellow,% not all pdf viewers recognize this field (Firefox does)
+% anchorcolor=yellow,% not all pdf viewers recognize this field (although Firefox does)
% colorscheme=phelype,% overrides link, cite, url, file colors with a preset scheme, through \DocumentMetadata
%
pdfborder={0 0 0},
@@ -155,16 +154,15 @@
pdfdisplaydoctitle=true,
pdfstartview=Fit,
pdfnewwindow=true,
-%
- pdfcopyright={Copyright © \DegreeYear\ by \YourName. \PDFRightsText},% definitions made by class file, don't change
- pdflicenseurl={\CCurl},% definition made by class file, don't change
}
+\AtEndDocument{
+ \hypersetup{pdfcopyright={Copyright © \DegreeYear\ by \YourName. \PDFRightsText},}% 1st and 3rd commands are defined by class file.
+}
%%%%%%%%%%%%%% End preamble %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
-
\begin{document}
@@ -177,25 +175,30 @@
% note on names: most of the following names are made up; Silas Holman was a professor at MIT in the 19th century.
-\Author{Silas W. Holman}{Department of Physics}%[B.S. Physics, MIT, 1876]
+\Author{Silas W. Holman}{Department of Physics}%[B.S. Physics, MIT, 1876][MBA, Ferengi School of Management, 2022]
%\Author{Luisa Hernández}{Department of Research}[B.S. Mechanical Engineering, UCLA, 2018][M.S. Stellar Interiors, Vulcan Science Academy, 2020][MBA, Ferengi School of Management, 2022]
% Use once for each degree fulfilled by thesis
+% For two degrees from one department, leave the department argument blank for the second degree {}.
\Degree{Bachelor of Science in Physics}{Department of Physics}
+%\Degree{Master of Science in Physics}{}
%\Degree{Bachelor of Science in Mechanical Engineering}{Department of Mechanical Engineering}
% If there is more than one supervisor, use the \Supervisor command for each.
\Supervisor{Edward C. Pickering}{Professor of Physics}
-%\Supervisor{Secunda Castor}{Department of Mechanical Engineering}
+%\Supervisor{Secunda Castor}{Professor of Research}
+%\Supervisor{Quintus Castor}{Professor of Log Dams}
% Professor who formally accepts theses for your department (e.g., the Graduate Officer, Professor Sméagol,...)
% If more than one department, use more than once
-\Acceptor{Primus Castor}{Professor of Wetlands Engineering}{Graduate Officer, First Degree Department}
-%\Acceptor{Tertius Castor}{Professor of Log Dams}{Graduate Officer, Second Degree Department}
+% If you need to reduce vertical space, put the acceptor title in the second argument and leave the third blank {}.
+\Acceptor{Primus Castor}{Professor of Wetlands Engineering}{Undergraduate Officer, Department of Physics}
+%\Acceptor{Tertius Castor}{Professor of Log Dams}{Graduate Officer, Department of Research}
+%\Acceptor{Quarta Castor}{Professor of Lodge Building}{Graduate Officer, Department of Mechanical Engineering}
% If your title page is overflowing (from too many names, degrees, etc.), you can scale
% down the Signature block at the bottom with this command, or use another creative solution...
-%\SignatureBlockSize{\small}
+%\SignatureBlockSize{\small} %\SignatureBlockSize{\footnotesize}
% Usage: \DegreeDate{Month}{year}
% Valid degree months are September, February, or June.
@@ -242,21 +245,11 @@
\cleardoublepage
-%%% Table of contents and lists of stuff (edit only if you want different lists) %%%%%%%%%%%%%%%%
+%%% Table of contents and lists of stuff (delete lists you don't need, e.g., if no tables) %%%%%%%%
- \pdfbookmark[0]{Table of Contents}{toc}%
\tableofcontents
- \cleardoublepage
-
- \phantomsection
\listoffigures
- \addcontentsline{toc}{chapter}{\protect\textbf{\listfigurename}}%
- \cleardoublepage
-
- \phantomsection
\listoftables
- \addcontentsline{toc}{chapter}{\protect\textbf{\listtablename}}%
- \cleardoublepage
%%% Chapters of thesis %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
Modified: trunk/Master/texmf-dist/doc/latex/mitthesis/examples/font_samples/latex_sources/Newtx.tex
===================================================================
--- trunk/Master/texmf-dist/doc/latex/mitthesis/examples/font_samples/latex_sources/Newtx.tex 2023-07-22 20:19:50 UTC (rev 67707)
+++ trunk/Master/texmf-dist/doc/latex/mitthesis/examples/font_samples/latex_sources/Newtx.tex 2023-07-22 20:20:15 UTC (rev 67708)
@@ -3,7 +3,7 @@
% !BIB program = biber
% This file is MIT-Thesis.tex, a template for producing MIT theses with the mitthesis class.
-% Version: 1.00, 2023/06/17
+% Version: 1.01, 2023/07/21
% Author: John H. Lienhard (c) 2023. Reuse under the MIT license: https://ctan.org/license/mit
% Documentation: https://ctan.org/pkg/mitthesis
@@ -115,9 +115,8 @@
%%%%%%%%%%% Hyperref setting and metadata %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
+\newcommand*\YourName{John H. Lienhard}% <====== CHANGE TO YOUR NAME !!!
-\def\YourName{John H. Lienhard}% <====== CHANGE TO YOUR NAME !!!
-
\hypersetup{%
%
% Be sure to change the following to your own information! <======== !!!
@@ -125,9 +124,9 @@
pdftitle={MIT thesis template},
pdfkeywords={\YourName, Massachusetts Institute of Technology, MIT},
pdfauthor={\YourName},
+% pdfauthor={{John H. Lienhard, V}},% if you have a comma in your name, surround by {..}
pdfauthortitle={Professor of Mechanical Engineering},
pdfcaptionwriter={\YourName},
-% pdfcaptionwriter={{John H. Lienhard, V}},% if you have a comma in your name, surround by {..}
pdfurl={https://lienhard.mit.edu},
pdfcontactemail={lienhard at mit.edu},
pdfcontactaddress={77 Massachusetts Avenue, Room 3-166},
@@ -139,11 +138,11 @@
pdfsubject={Template for writing MIT theses with the mitthesis class},% briefly state what this document is about
%
colorlinks=true,
- linkcolor=blue,
- citecolor=blue,
- urlcolor=violet,
+ linkcolor=Blue3,% from xcolor package
+ citecolor=Blue3,% from xcolor package
+ urlcolor=violet,% from xcolor package
filecolor=red,
-% anchorcolor=yellow,% not all pdf viewers recognize this field (Firefox does)
+% anchorcolor=yellow,% not all pdf viewers recognize this field (although Firefox does)
% colorscheme=phelype,% overrides link, cite, url, file colors with a preset scheme, through \DocumentMetadata
%
pdfborder={0 0 0},
@@ -155,16 +154,15 @@
pdfdisplaydoctitle=true,
pdfstartview=Fit,
pdfnewwindow=true,
-%
- pdfcopyright={Copyright © \DegreeYear\ by \YourName. \PDFRightsText},% definitions made by class file, don't change
- pdflicenseurl={\CCurl},% definition made by class file, don't change
}
+\AtEndDocument{
+ \hypersetup{pdfcopyright={Copyright © \DegreeYear\ by \YourName. \PDFRightsText},}% 1st and 3rd commands are defined by class file.
+}
%%%%%%%%%%%%%% End preamble %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
-
\begin{document}
@@ -177,25 +175,30 @@
% note on names: most of the following names are made up; Silas Holman was a professor at MIT in the 19th century.
-\Author{Silas W. Holman}{Department of Physics}%[B.S. Physics, MIT, 1876]
+\Author{Silas W. Holman}{Department of Physics}%[B.S. Physics, MIT, 1876][MBA, Ferengi School of Management, 2022]
%\Author{Luisa Hernández}{Department of Research}[B.S. Mechanical Engineering, UCLA, 2018][M.S. Stellar Interiors, Vulcan Science Academy, 2020][MBA, Ferengi School of Management, 2022]
% Use once for each degree fulfilled by thesis
+% For two degrees from one department, leave the department argument blank for the second degree {}.
\Degree{Bachelor of Science in Physics}{Department of Physics}
+%\Degree{Master of Science in Physics}{}
%\Degree{Bachelor of Science in Mechanical Engineering}{Department of Mechanical Engineering}
% If there is more than one supervisor, use the \Supervisor command for each.
\Supervisor{Edward C. Pickering}{Professor of Physics}
-%\Supervisor{Secunda Castor}{Department of Mechanical Engineering}
+%\Supervisor{Secunda Castor}{Professor of Research}
+%\Supervisor{Quintus Castor}{Professor of Log Dams}
% Professor who formally accepts theses for your department (e.g., the Graduate Officer, Professor Sméagol,...)
% If more than one department, use more than once
-\Acceptor{Primus Castor}{Professor of Wetlands Engineering}{Graduate Officer, First Degree Department}
-%\Acceptor{Tertius Castor}{Professor of Log Dams}{Graduate Officer, Second Degree Department}
+% If you need to reduce vertical space, put the acceptor title in the second argument and leave the third blank {}.
+\Acceptor{Primus Castor}{Professor of Wetlands Engineering}{Undergraduate Officer, Department of Physics}
+%\Acceptor{Tertius Castor}{Professor of Log Dams}{Graduate Officer, Department of Research}
+%\Acceptor{Quarta Castor}{Professor of Lodge Building}{Graduate Officer, Department of Mechanical Engineering}
% If your title page is overflowing (from too many names, degrees, etc.), you can scale
% down the Signature block at the bottom with this command, or use another creative solution...
-%\SignatureBlockSize{\small}
+%\SignatureBlockSize{\small} %\SignatureBlockSize{\footnotesize}
% Usage: \DegreeDate{Month}{year}
% Valid degree months are September, February, or June.
@@ -242,21 +245,11 @@
\cleardoublepage
-%%% Table of contents and lists of stuff (edit only if you want different lists) %%%%%%%%%%%%%%%%
+%%% Table of contents and lists of stuff (delete lists you don't need, e.g., if no tables) %%%%%%%%
- \pdfbookmark[0]{Table of Contents}{toc}%
\tableofcontents
- \cleardoublepage
-
- \phantomsection
\listoffigures
- \addcontentsline{toc}{chapter}{\protect\textbf{\listfigurename}}%
- \cleardoublepage
-
- \phantomsection
\listoftables
- \addcontentsline{toc}{chapter}{\protect\textbf{\listtablename}}%
- \cleardoublepage
%%% Chapters of thesis %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
Modified: trunk/Master/texmf-dist/doc/latex/mitthesis/examples/font_samples/latex_sources/Stix2.tex
===================================================================
--- trunk/Master/texmf-dist/doc/latex/mitthesis/examples/font_samples/latex_sources/Stix2.tex 2023-07-22 20:19:50 UTC (rev 67707)
+++ trunk/Master/texmf-dist/doc/latex/mitthesis/examples/font_samples/latex_sources/Stix2.tex 2023-07-22 20:20:15 UTC (rev 67708)
@@ -3,7 +3,7 @@
% !BIB program = biber
% This file is MIT-Thesis.tex, a template for producing MIT theses with the mitthesis class.
-% Version: 1.00, 2023/06/17
+% Version: 1.01, 2023/07/21
% Author: John H. Lienhard (c) 2023. Reuse under the MIT license: https://ctan.org/license/mit
% Documentation: https://ctan.org/pkg/mitthesis
@@ -115,9 +115,8 @@
%%%%%%%%%%% Hyperref setting and metadata %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
+\newcommand*\YourName{John H. Lienhard}% <====== CHANGE TO YOUR NAME !!!
-\def\YourName{John H. Lienhard}% <====== CHANGE TO YOUR NAME !!!
-
\hypersetup{%
%
% Be sure to change the following to your own information! <======== !!!
@@ -125,9 +124,9 @@
pdftitle={MIT thesis template},
pdfkeywords={\YourName, Massachusetts Institute of Technology, MIT},
pdfauthor={\YourName},
+% pdfauthor={{John H. Lienhard, V}},% if you have a comma in your name, surround by {..}
pdfauthortitle={Professor of Mechanical Engineering},
pdfcaptionwriter={\YourName},
-% pdfcaptionwriter={{John H. Lienhard, V}},% if you have a comma in your name, surround by {..}
pdfurl={https://lienhard.mit.edu},
pdfcontactemail={lienhard at mit.edu},
pdfcontactaddress={77 Massachusetts Avenue, Room 3-166},
@@ -139,11 +138,11 @@
pdfsubject={Template for writing MIT theses with the mitthesis class},% briefly state what this document is about
%
colorlinks=true,
- linkcolor=blue,
- citecolor=blue,
- urlcolor=violet,
+ linkcolor=Blue3,% from xcolor package
+ citecolor=Blue3,% from xcolor package
+ urlcolor=violet,% from xcolor package
filecolor=red,
-% anchorcolor=yellow,% not all pdf viewers recognize this field (Firefox does)
+% anchorcolor=yellow,% not all pdf viewers recognize this field (although Firefox does)
% colorscheme=phelype,% overrides link, cite, url, file colors with a preset scheme, through \DocumentMetadata
%
pdfborder={0 0 0},
@@ -155,16 +154,15 @@
pdfdisplaydoctitle=true,
pdfstartview=Fit,
pdfnewwindow=true,
-%
- pdfcopyright={Copyright © \DegreeYear\ by \YourName. \PDFRightsText},% definitions made by class file, don't change
- pdflicenseurl={\CCurl},% definition made by class file, don't change
}
+\AtEndDocument{
+ \hypersetup{pdfcopyright={Copyright © \DegreeYear\ by \YourName. \PDFRightsText},}% 1st and 3rd commands are defined by class file.
+}
%%%%%%%%%%%%%% End preamble %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
-
\begin{document}
@@ -177,25 +175,30 @@
% note on names: most of the following names are made up; Silas Holman was a professor at MIT in the 19th century.
-\Author{Silas W. Holman}{Department of Physics}%[B.S. Physics, MIT, 1876]
+\Author{Silas W. Holman}{Department of Physics}%[B.S. Physics, MIT, 1876][MBA, Ferengi School of Management, 2022]
%\Author{Luisa Hernández}{Department of Research}[B.S. Mechanical Engineering, UCLA, 2018][M.S. Stellar Interiors, Vulcan Science Academy, 2020][MBA, Ferengi School of Management, 2022]
% Use once for each degree fulfilled by thesis
+% For two degrees from one department, leave the department argument blank for the second degree {}.
\Degree{Bachelor of Science in Physics}{Department of Physics}
+%\Degree{Master of Science in Physics}{}
%\Degree{Bachelor of Science in Mechanical Engineering}{Department of Mechanical Engineering}
% If there is more than one supervisor, use the \Supervisor command for each.
\Supervisor{Edward C. Pickering}{Professor of Physics}
-%\Supervisor{Secunda Castor}{Department of Mechanical Engineering}
+%\Supervisor{Secunda Castor}{Professor of Research}
+%\Supervisor{Quintus Castor}{Professor of Log Dams}
% Professor who formally accepts theses for your department (e.g., the Graduate Officer, Professor Sméagol,...)
% If more than one department, use more than once
-\Acceptor{Primus Castor}{Professor of Wetlands Engineering}{Graduate Officer, First Degree Department}
-%\Acceptor{Tertius Castor}{Professor of Log Dams}{Graduate Officer, Second Degree Department}
+% If you need to reduce vertical space, put the acceptor title in the second argument and leave the third blank {}.
+\Acceptor{Primus Castor}{Professor of Wetlands Engineering}{Undergraduate Officer, Department of Physics}
+%\Acceptor{Tertius Castor}{Professor of Log Dams}{Graduate Officer, Department of Research}
+%\Acceptor{Quarta Castor}{Professor of Lodge Building}{Graduate Officer, Department of Mechanical Engineering}
% If your title page is overflowing (from too many names, degrees, etc.), you can scale
% down the Signature block at the bottom with this command, or use another creative solution...
-%\SignatureBlockSize{\small}
+%\SignatureBlockSize{\small} %\SignatureBlockSize{\footnotesize}
% Usage: \DegreeDate{Month}{year}
% Valid degree months are September, February, or June.
@@ -242,21 +245,11 @@
\cleardoublepage
-%%% Table of contents and lists of stuff (edit only if you want different lists) %%%%%%%%%%%%%%%%
+%%% Table of contents and lists of stuff (delete lists you don't need, e.g., if no tables) %%%%%%%%
- \pdfbookmark[0]{Table of Contents}{toc}%
\tableofcontents
- \cleardoublepage
-
- \phantomsection
\listoffigures
- \addcontentsline{toc}{chapter}{\protect\textbf{\listfigurename}}%
- \cleardoublepage
-
- \phantomsection
\listoftables
- \addcontentsline{toc}{chapter}{\protect\textbf{\listtablename}}%
- \cleardoublepage
%%% Chapters of thesis %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
Modified: trunk/Master/texmf-dist/doc/latex/mitthesis/examples/font_samples/latex_sources/Termes-Stix2.tex
===================================================================
--- trunk/Master/texmf-dist/doc/latex/mitthesis/examples/font_samples/latex_sources/Termes-Stix2.tex 2023-07-22 20:19:50 UTC (rev 67707)
+++ trunk/Master/texmf-dist/doc/latex/mitthesis/examples/font_samples/latex_sources/Termes-Stix2.tex 2023-07-22 20:20:15 UTC (rev 67708)
@@ -3,7 +3,7 @@
% !BIB program = biber
% This file is MIT-Thesis.tex, a template for producing MIT theses with the mitthesis class.
-% Version: 1.00, 2023/06/17
+% Version: 1.01, 2023/07/21
% Author: John H. Lienhard (c) 2023. Reuse under the MIT license: https://ctan.org/license/mit
% Documentation: https://ctan.org/pkg/mitthesis
@@ -115,9 +115,8 @@
%%%%%%%%%%% Hyperref setting and metadata %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
+\newcommand*\YourName{John H. Lienhard}% <====== CHANGE TO YOUR NAME !!!
-\def\YourName{John H. Lienhard}% <====== CHANGE TO YOUR NAME !!!
-
\hypersetup{%
%
% Be sure to change the following to your own information! <======== !!!
@@ -125,9 +124,9 @@
pdftitle={MIT thesis template},
pdfkeywords={\YourName, Massachusetts Institute of Technology, MIT},
pdfauthor={\YourName},
+% pdfauthor={{John H. Lienhard, V}},% if you have a comma in your name, surround by {..}
pdfauthortitle={Professor of Mechanical Engineering},
pdfcaptionwriter={\YourName},
-% pdfcaptionwriter={{John H. Lienhard, V}},% if you have a comma in your name, surround by {..}
pdfurl={https://lienhard.mit.edu},
pdfcontactemail={lienhard at mit.edu},
pdfcontactaddress={77 Massachusetts Avenue, Room 3-166},
@@ -139,11 +138,11 @@
pdfsubject={Template for writing MIT theses with the mitthesis class},% briefly state what this document is about
%
colorlinks=true,
- linkcolor=blue,
- citecolor=blue,
- urlcolor=violet,
+ linkcolor=Blue3,% from xcolor package
+ citecolor=Blue3,% from xcolor package
+ urlcolor=violet,% from xcolor package
filecolor=red,
-% anchorcolor=yellow,% not all pdf viewers recognize this field (Firefox does)
+% anchorcolor=yellow,% not all pdf viewers recognize this field (although Firefox does)
% colorscheme=phelype,% overrides link, cite, url, file colors with a preset scheme, through \DocumentMetadata
%
pdfborder={0 0 0},
@@ -155,16 +154,15 @@
pdfdisplaydoctitle=true,
pdfstartview=Fit,
pdfnewwindow=true,
-%
- pdfcopyright={Copyright © \DegreeYear\ by \YourName. \PDFRightsText},% definitions made by class file, don't change
- pdflicenseurl={\CCurl},% definition made by class file, don't change
}
+\AtEndDocument{
+ \hypersetup{pdfcopyright={Copyright © \DegreeYear\ by \YourName. \PDFRightsText},}% 1st and 3rd commands are defined by class file.
+}
%%%%%%%%%%%%%% End preamble %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
-
\begin{document}
@@ -177,25 +175,30 @@
% note on names: most of the following names are made up; Silas Holman was a professor at MIT in the 19th century.
-\Author{Silas W. Holman}{Department of Physics}%[B.S. Physics, MIT, 1876]
+\Author{Silas W. Holman}{Department of Physics}%[B.S. Physics, MIT, 1876][MBA, Ferengi School of Management, 2022]
%\Author{Luisa Hernández}{Department of Research}[B.S. Mechanical Engineering, UCLA, 2018][M.S. Stellar Interiors, Vulcan Science Academy, 2020][MBA, Ferengi School of Management, 2022]
% Use once for each degree fulfilled by thesis
+% For two degrees from one department, leave the department argument blank for the second degree {}.
\Degree{Bachelor of Science in Physics}{Department of Physics}
+%\Degree{Master of Science in Physics}{}
%\Degree{Bachelor of Science in Mechanical Engineering}{Department of Mechanical Engineering}
% If there is more than one supervisor, use the \Supervisor command for each.
\Supervisor{Edward C. Pickering}{Professor of Physics}
-%\Supervisor{Secunda Castor}{Department of Mechanical Engineering}
+%\Supervisor{Secunda Castor}{Professor of Research}
+%\Supervisor{Quintus Castor}{Professor of Log Dams}
% Professor who formally accepts theses for your department (e.g., the Graduate Officer, Professor Sméagol,...)
% If more than one department, use more than once
-\Acceptor{Primus Castor}{Professor of Wetlands Engineering}{Graduate Officer, First Degree Department}
-%\Acceptor{Tertius Castor}{Professor of Log Dams}{Graduate Officer, Second Degree Department}
+% If you need to reduce vertical space, put the acceptor title in the second argument and leave the third blank {}.
+\Acceptor{Primus Castor}{Professor of Wetlands Engineering}{Undergraduate Officer, Department of Physics}
+%\Acceptor{Tertius Castor}{Professor of Log Dams}{Graduate Officer, Department of Research}
+%\Acceptor{Quarta Castor}{Professor of Lodge Building}{Graduate Officer, Department of Mechanical Engineering}
% If your title page is overflowing (from too many names, degrees, etc.), you can scale
% down the Signature block at the bottom with this command, or use another creative solution...
-%\SignatureBlockSize{\small}
+%\SignatureBlockSize{\small} %\SignatureBlockSize{\footnotesize}
% Usage: \DegreeDate{Month}{year}
% Valid degree months are September, February, or June.
@@ -242,21 +245,11 @@
\cleardoublepage
-%%% Table of contents and lists of stuff (edit only if you want different lists) %%%%%%%%%%%%%%%%
+%%% Table of contents and lists of stuff (delete lists you don't need, e.g., if no tables) %%%%%%%%
- \pdfbookmark[0]{Table of Contents}{toc}%
\tableofcontents
- \cleardoublepage
-
- \phantomsection
\listoffigures
- \addcontentsline{toc}{chapter}{\protect\textbf{\listfigurename}}%
- \cleardoublepage
-
- \phantomsection
\listoftables
- \addcontentsline{toc}{chapter}{\protect\textbf{\listtablename}}%
- \cleardoublepage
%%% Chapters of thesis %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
Modified: trunk/Master/texmf-dist/doc/latex/mitthesis/examples/font_samples/latex_sources/Termes.tex
===================================================================
--- trunk/Master/texmf-dist/doc/latex/mitthesis/examples/font_samples/latex_sources/Termes.tex 2023-07-22 20:19:50 UTC (rev 67707)
+++ trunk/Master/texmf-dist/doc/latex/mitthesis/examples/font_samples/latex_sources/Termes.tex 2023-07-22 20:20:15 UTC (rev 67708)
@@ -4,7 +4,7 @@
% !BIB program = biber
% This file is MIT-Thesis.tex, a template for producing MIT theses with the mitthesis class.
-% Version: 1.00, 2023/06/17
+% Version: 1.01, 2023/07/21
% Author: John H. Lienhard (c) 2023. Reuse under the MIT license: https://ctan.org/license/mit
% Documentation: https://ctan.org/pkg/mitthesis
@@ -116,9 +116,8 @@
%%%%%%%%%%% Hyperref setting and metadata %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
+\newcommand*\YourName{John H. Lienhard}% <====== CHANGE TO YOUR NAME !!!
-\def\YourName{John H. Lienhard}% <====== CHANGE TO YOUR NAME !!!
-
\hypersetup{%
%
% Be sure to change the following to your own information! <======== !!!
@@ -126,9 +125,9 @@
pdftitle={MIT thesis template},
pdfkeywords={\YourName, Massachusetts Institute of Technology, MIT},
pdfauthor={\YourName},
+% pdfauthor={{John H. Lienhard, V}},% if you have a comma in your name, surround by {..}
pdfauthortitle={Professor of Mechanical Engineering},
pdfcaptionwriter={\YourName},
-% pdfcaptionwriter={{John H. Lienhard, V}},% if you have a comma in your name, surround by {..}
pdfurl={https://lienhard.mit.edu},
pdfcontactemail={lienhard at mit.edu},
pdfcontactaddress={77 Massachusetts Avenue, Room 3-166},
@@ -140,11 +139,11 @@
pdfsubject={Template for writing MIT theses with the mitthesis class},% briefly state what this document is about
%
colorlinks=true,
- linkcolor=blue,
- citecolor=blue,
- urlcolor=violet,
+ linkcolor=Blue3,% from xcolor package
+ citecolor=Blue3,% from xcolor package
+ urlcolor=violet,% from xcolor package
filecolor=red,
-% anchorcolor=yellow,% not all pdf viewers recognize this field (Firefox does)
+% anchorcolor=yellow,% not all pdf viewers recognize this field (although Firefox does)
% colorscheme=phelype,% overrides link, cite, url, file colors with a preset scheme, through \DocumentMetadata
%
pdfborder={0 0 0},
@@ -156,16 +155,15 @@
pdfdisplaydoctitle=true,
pdfstartview=Fit,
pdfnewwindow=true,
-%
- pdfcopyright={Copyright © \DegreeYear\ by \YourName. \PDFRightsText},% definitions made by class file, don't change
- pdflicenseurl={\CCurl},% definition made by class file, don't change
}
+\AtEndDocument{
+ \hypersetup{pdfcopyright={Copyright © \DegreeYear\ by \YourName. \PDFRightsText},}% 1st and 3rd commands are defined by class file.
+}
%%%%%%%%%%%%%% End preamble %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
-
\begin{document}
@@ -178,25 +176,30 @@
% note on names: most of the following names are made up; Silas Holman was a professor at MIT in the 19th century.
-\Author{Silas W. Holman}{Department of Physics}%[B.S. Physics, MIT, 1876]
+\Author{Silas W. Holman}{Department of Physics}%[B.S. Physics, MIT, 1876][MBA, Ferengi School of Management, 2022]
%\Author{Luisa Hernández}{Department of Research}[B.S. Mechanical Engineering, UCLA, 2018][M.S. Stellar Interiors, Vulcan Science Academy, 2020][MBA, Ferengi School of Management, 2022]
% Use once for each degree fulfilled by thesis
+% For two degrees from one department, leave the department argument blank for the second degree {}.
\Degree{Bachelor of Science in Physics}{Department of Physics}
+%\Degree{Master of Science in Physics}{}
%\Degree{Bachelor of Science in Mechanical Engineering}{Department of Mechanical Engineering}
% If there is more than one supervisor, use the \Supervisor command for each.
\Supervisor{Edward C. Pickering}{Professor of Physics}
-%\Supervisor{Secunda Castor}{Department of Mechanical Engineering}
+%\Supervisor{Secunda Castor}{Professor of Research}
+%\Supervisor{Quintus Castor}{Professor of Log Dams}
% Professor who formally accepts theses for your department (e.g., the Graduate Officer, Professor Sméagol,...)
% If more than one department, use more than once
-\Acceptor{Primus Castor}{Professor of Wetlands Engineering}{Graduate Officer, First Degree Department}
-%\Acceptor{Tertius Castor}{Professor of Log Dams}{Graduate Officer, Second Degree Department}
+% If you need to reduce vertical space, put the acceptor title in the second argument and leave the third blank {}.
+\Acceptor{Primus Castor}{Professor of Wetlands Engineering}{Undergraduate Officer, Department of Physics}
+%\Acceptor{Tertius Castor}{Professor of Log Dams}{Graduate Officer, Department of Research}
+%\Acceptor{Quarta Castor}{Professor of Lodge Building}{Graduate Officer, Department of Mechanical Engineering}
% If your title page is overflowing (from too many names, degrees, etc.), you can scale
% down the Signature block at the bottom with this command, or use another creative solution...
-%\SignatureBlockSize{\small}
+%\SignatureBlockSize{\small} %\SignatureBlockSize{\footnotesize}
% Usage: \DegreeDate{Month}{year}
% Valid degree months are September, February, or June.
@@ -243,21 +246,11 @@
\cleardoublepage
-%%% Table of contents and lists of stuff (edit only if you want different lists) %%%%%%%%%%%%%%%%
+%%% Table of contents and lists of stuff (delete lists you don't need, e.g., if no tables) %%%%%%%%
- \pdfbookmark[0]{Table of Contents}{toc}%
\tableofcontents
- \cleardoublepage
-
- \phantomsection
\listoffigures
- \addcontentsline{toc}{chapter}{\protect\textbf{\listfigurename}}%
- \cleardoublepage
-
- \phantomsection
\listoftables
- \addcontentsline{toc}{chapter}{\protect\textbf{\listtablename}}%
- \cleardoublepage
%%% Chapters of thesis %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
Modified: trunk/Master/texmf-dist/doc/latex/mitthesis/mitthesis-doc/mitthesis-doc.pdf
===================================================================
(Binary files differ)
Modified: trunk/Master/texmf-dist/doc/latex/mitthesis/mitthesis-doc/mitthesis-doc.tex
===================================================================
--- trunk/Master/texmf-dist/doc/latex/mitthesis/mitthesis-doc/mitthesis-doc.tex 2023-07-22 20:19:50 UTC (rev 67707)
+++ trunk/Master/texmf-dist/doc/latex/mitthesis/mitthesis-doc/mitthesis-doc.tex 2023-07-22 20:20:15 UTC (rev 67708)
@@ -266,7 +266,7 @@
\item \verb|\Acceptor{acceptor name}{acceptor title}{thesis related position}|. Professor who accepts theses for your department (e.g., the Graduate Officer). Use once for each department.
-\item \verb|\DegreeDate{Month}{year}|. Date degree is awarded (February, June, or September).
+\item \verb|\DegreeDate{Month}{year}|. Date degree is awarded (February, May, June, or September).
\item \verb|\ThesisDate{date}|. Date that your final thesis is submitted to the department.
\end{itemize}
@@ -361,6 +361,7 @@
\toprule
Package & Class & User \\
\midrule
+bm & defines commands to access bold math symbols (loaded for default fonts) & with \pdfTeX, the command \verb|\bm{..}| produces a bold math symbol \\
bookmarks& is loaded automatically under the new pdf-management system & --- \\
doi & support for hyperlinking DOIs & hyperlink a doi number: \verb|\doi{..}| \\
etoolbox & extend or modify other macros & can use in preamble if needed \\
@@ -374,7 +375,7 @@
mathtools& loads and extends \texttt{amsmath} & \textbf{many useful math macros available}. See documentation for \texttt{amsmath} and \texttt{mathtools} \\
xparse & for systems older than 2020/10/01 & macros to define new commands\\[0.7em]
\midrule
-lineno & option for the class & keyvalue \texttt{lineno} will give line numbers; \texttt{lineno} package has additional commands that control line numbering\\[3em]
+lineno & loaded if class option is given & keyvalue \texttt{lineno} will give line numbers; \texttt{lineno} package has additional commands that control line numbering\\[3em]
\midrule
caption & also loaded by \texttt{mydesign.tex} & support for caption styling \\
subcaption & also loaded by \texttt{mydesign.tex} & support for subfigures within figures \\
Modified: trunk/Master/texmf-dist/tex/latex/mitthesis/mitthesis.cls
===================================================================
--- trunk/Master/texmf-dist/tex/latex/mitthesis/mitthesis.cls 2023-07-22 20:19:50 UTC (rev 67707)
+++ trunk/Master/texmf-dist/tex/latex/mitthesis/mitthesis.cls 2023-07-22 20:20:15 UTC (rev 67708)
@@ -7,8 +7,8 @@
%% MIT Libraries' requirements as of 2023.
%%
%% This file's version and date:
- \def\versionno{1.04}
- \def\versiondate{2023/07/03\space}
+ \def\versionno{1.05}
+ \def\versiondate{2023/07/21\space}
%%
%% Author: John H. Lienhard, V
%% Department of Mechanical Engineering
@@ -187,7 +187,20 @@
\providecommand{\@LN at col}[1]{\relax}
\providecommand{\@LN}[2]{\relax}
+%%%%%%%%%%%%% Patch table of contents, list of figures, and list of tables %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
+%
+% We'd like these to have pdf bookmarks and to have the lists appear in the table of contents
+\pretocmd{\tableofcontents}{\pdfbookmark[0]{Table of Contents}{toc}}{}{}
+\apptocmd{\tableofcontents}{\cleardoublepage}{}{}
+\pretocmd{\listoffigures}{\phantomsection}{}{}
+\patchcmd{\listoffigures}{\chapter*{\listfigurename}}{\chapter*{\listfigurename}\addcontentsline{toc}{chapter}{\protect\textbf{\listfigurename}}}{}{}
+\apptocmd{\listoffigures}{\cleardoublepage}{}{}
+\pretocmd{\listoftables}{\phantomsection}{}{}
+\patchcmd{\listoftables}{\chapter*{\listtablename}}{\chapter*{\listtablename}\addcontentsline{toc}{chapter}{\protect\textbf{\listtablename}}}{}{}
+\apptocmd{\listoftables}{\cleardoublepage}{}{}
+
+
%%%%%%%%%%%%% Geometry, mathtools, design, graphics, bibliography, hyperrefs, bookmarks %%%%%%%%%%%%%%%%%%%%%%%
\RequirePackage[letterpaper,top=1in,bottom=1in,left=1in,right=1in,marginparwidth=50pt,headsep=12pt,footskip=0.5in]{geometry}
@@ -218,7 +231,7 @@
\fi
\fi
\fi
- \usepackage[hyperref,\MyColorOption,dvipsnames,svgnames,x11names]{xcolor}
+ \RequirePackage[hyperref,\MyColorOption,dvipsnames,svgnames,x11names]{xcolor}
%
\RequirePackage{caption,subcaption}
%
@@ -235,7 +248,7 @@
\IfFileExists{fontsets/\ClassName-\mit at fontset.tex}{% 2023/07/03
\input{fontsets/\ClassName-\mit at fontset.tex}
}{%
- \typeout{^^JFontset file \ClassName-\mit at fontset.tex not found, using defaultfonts.}
+ \ClassWarning{\ClassName}{^^JFontset file \ClassName-\mit at fontset.tex not found, using default fonts.}
\ifpdftex
\typeout{^^JLoading Computer Modern text and math fonts (default for pdftex).^^J}
\RequirePackage[T1]{fontenc}
@@ -254,7 +267,7 @@
\ClassInfo{\ClassName}{pdfmanagement is defined. Will not load hyperxmp}%
\else
\ClassInfo{\ClassName}{pdfmanagement is not defined. Will load hyperxmp}%
- \RequirePackage{hyperxmp}
+ \RequirePackage{hyperxmp}
\fi
\RequirePackage[psdextra]{hyperref}
@@ -326,10 +339,10 @@
\ExplSyntaxOn
\NewExpandableDocumentCommand\MonthCheck{mm}{%
- \str_case_e:nnF {#1}{ {June}{} {September}{} {February}{}
- {\space June}{} {\space September}{} {\space February}{}
- {June\space}{} {September\space}{} { February\space}{}
- {\space June\space}{} {\space September\space}{} {\space February\space}{}
+ \str_case_e:nnF {#1}{ {May}{} {June}{} {September}{} {February}{}
+ {\space May}{} {\space June}{} {\space September}{} {\space February}{}
+ {May\space}{} {June\space}{} {September\space}{} { February\space}{}
+ {\space May\space}{} {\space June\space}{} {\space September\space}{} {\space February\space}{}
}{#2}
}
\ExplSyntaxOff
@@ -394,6 +407,18 @@
}%
}
+\NewDocumentCommand\@AbstractAuthorBlock{}{% Revised 2023/07/20
+ \setcounter{authorno}{1}%
+ {by\par
+ \whiledo{\value{authorno}<\value{authorcnt}}{%
+ \ignorespaces\csname aut@\theauthorno\endcsname
+ \par and\par
+ \addtocounter{authorno}{1}%
+ }%
+ \ignorespaces\csname aut@\theauthorno\endcsname
+ }%
+}
+
\newcounter{autcrcnt}
\setcounter{autcrcnt}{1}
@@ -458,6 +483,31 @@
\MakeUppercase{\ignorespaces\csname deg@\thedegno\endcsname}\par\medskip
}
+\NewDocumentCommand\@AbstractDegreeBlock{}{% 2023/07/19
+ \setcounter{degno}{1}
+ \setcounter{depno}{1}
+ \newcommand*\PrevDept{\csname degdep@\thedepno\endcsname}
+ \newcommand*\CurrDept{}
+ Submitted to the \mbox{\PrevDept}%
+ \whiledo{\value{depno}<\value{degcnt}}{%
+ \addtocounter{depno}{1}%
+ \renewcommand*\CurrDept{\csname degdep@\thedepno\endcsname}%
+ \ifnum\value{depflag}=\value{depno}\relax\else
+ \space and the\linebreak
+ \mbox{\CurrDept}%
+ \fi%
+ }%
+ \linebreak on \@ThesisDate \space \mbox{in partial fulfillment of the requirements for the\space
+ \ifnum\value{degcnt}>1 degrees\else degree\fi\space of}%
+ \par\medskip
+ \whiledo{\value{degno}<\value{degcnt}}{%
+ \MakeUppercase{\ignorespaces\csname deg@\thedegno\endcsname}\par and\par
+ \addtocounter{degno}{1}%
+ }%
+ \MakeUppercase{\ignorespaces\csname deg@\thedegno\endcsname}\par\medskip
+}
+
+
\newcounter{supcnt}
\setcounter{supcnt}{0}
\newcounter{supno}
@@ -558,14 +608,18 @@
%%%%%%%%%%%%%%%%%%% Copyright related %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
-\def\CCurl{}% empty by default
+\ExplSyntaxOn
\newif\ifmit at cclicense\mit at cclicensefalse
\NewDocumentCommand\CClicense{m m}{%
\def\CClicensetext{\hrefurl{#2}{\ignorespaces#1}}% #1 - text, #2 - url
- \def\CCname{#1}
- \def\CCurl{#2}% for use in metadata
+ \def\CCname{#1}%
+ \def\CCurl{#2}% only for backward compatibility
\mit at cclicensetrue
+ \cs_if_exist:NT \pdfmeta_xmp_add:n {%
+ \pdfmeta_xmp_add:n {<xmpRights:WebStatement>#2</xmpRights:WebStatement>}
+ }
}
+\ExplSyntaxOff
%%%%%%%%%%%%%%%%%%% Create titlepage %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
@@ -605,8 +659,8 @@
\MIT\par
\@DegreeMonth\space\@DegreeYear
\MonthCheck{\@@DegreeMonth}{%
- \ClassError{\ClassName}{Acceptable months for the degree date are February, June, and September}{Change %
- the month of your degree date to one of February, June, or September.}%
+ \ClassError{\ClassName}{Acceptable months for the degree date are February, May, June, and September}{Change %
+ the month of your degree date to one of February, May, June, or September.}%
}%
\par
\copyright\space\@DegreeYear\space\@CopyrightAuthor. \CopyrightLicense
@@ -627,9 +681,9 @@
\begin{center}
{\large{\textbf{\@title}}\par}
\setlength{\parskip}{0.5\baselineskip plus 2pt minus 2pt}
- \@AuthorBlock
+ \@AbstractAuthorBlock
\par
- \@DegreeBlock
+ \@AbstractDegreeBlock
\end{center}
\vskip\baselineskip
\textbf{ABSTRACT}\par\vskip0.5em
More information about the tex-live-commits
mailing list.