texlive[59176] trunk: doc, sync
commits+karl at tug.org
commits+karl at tug.org
Wed May 12 23:49:59 CEST 2021
Revision: 59176
http://tug.org/svn/texlive?view=revision&revision=59176
Author: karl
Date: 2021-05-12 23:49:59 +0200 (Wed, 12 May 2021)
Log Message:
-----------
doc, sync
Modified Paths:
--------------
trunk/Build/source/texk/tests/TeXLive/TLConfig.pm
trunk/Build/source/texk/tests/TeXLive/TLUtils.pm
trunk/Build/source/texk/texlive/linked_scripts/texlive/fmtutil.pl
trunk/Build/source/texk/texlive/linked_scripts/texlive/tlmgr.pl
trunk/Build/source/texk/texlive/linked_scripts/texlive/updmap.pl
trunk/Build/source/texk/texlive/w32_wrapper/runscript.tlu
trunk/Master/tlpkg/dev/srclist.txt
trunk/Master/tlpkg/doc/releng.txt
Modified: trunk/Build/source/texk/tests/TeXLive/TLConfig.pm
===================================================================
--- trunk/Build/source/texk/tests/TeXLive/TLConfig.pm 2021-05-12 20:04:18 UTC (rev 59175)
+++ trunk/Build/source/texk/tests/TeXLive/TLConfig.pm 2021-05-12 21:49:59 UTC (rev 59176)
@@ -5,7 +5,7 @@
package TeXLive::TLConfig;
-my $svnrev = '$Revision: 57875 $';
+my $svnrev = '$Revision: 59122 $';
my $_modulerevision = ($svnrev =~ m/: ([0-9]+) /) ? $1 : "unknown";
sub module_revision { return $_modulerevision; }
@@ -34,6 +34,7 @@
$BlockSize
$Archive
$TeXLiveServerURL
+ $TeXLiveServerURLRegexp
$TeXLiveServerPath
$TeXLiveURL
@CriticalPackagesList
@@ -100,7 +101,8 @@
our $MaxLWPReinitCount = 10;
our $Archive = "archive";
-our $TeXLiveServerURL = "http://mirror.ctan.org";
+our $TeXLiveServerURL = "https://mirror.ctan.org";
+our $TeXLiveServerURLRegexp = 'https?://mirror\.ctan\.org';
# from 2009 on we try to put them all into tlnet directly without any
# release year since we hope that we can switch over to 2010 on the fly
# our $TeXLiveServerPath = "systems/texlive/tlnet/$ReleaseYear";
@@ -122,10 +124,13 @@
our @AcceptedFallbackDownloaders = qw/curl wget/;
our %FallbackDownloaderProgram = ( 'wget' => 'wget', 'curl' => 'curl');
our %FallbackDownloaderArgs = (
- 'curl' => ['--user-agent', 'texlive/curl', '--retry', '4', '--retry-delay', '5',
- '--fail', '--location',
- '--connect-timeout', "$NetworkTimeout", '--silent', '--output'],
+ 'curl' => ['--user-agent', 'texlive/curl',
+ '--retry', '4', '--retry-delay', '4',
+ '--connect-timeout', "$NetworkTimeout",
+ '--insecure',
+ '--fail', '--location', '--silent', '--output'],
'wget' => ['--user-agent=texlive/wget', '--tries=4',
+ '--no-check-certificate',
"--timeout=$NetworkTimeout", '-q', '-O'],
);
# the way we package things on the web
@@ -340,10 +345,11 @@
These values specify where to find packages.
=item C<$TeXLive::TLConfig::TeXLiveServerURL>
+=item C<$TeXLive::TLConfig::TeXLiveServerURLRegexp>
=item C<$TeXLive::TLConfig::TeXLiveServerPath>
C<TeXLiveURL> is concatenated from these values, with a string between.
-The defaults are respectively, C<http://mirror.ctan.org> and
+The defaults are respectively, C<https://mirror.ctan.org> and
C<systems/texlive/tlnet/>.
=item C<@TeXLive::TLConfig::CriticalPackagesList>
Modified: trunk/Build/source/texk/tests/TeXLive/TLUtils.pm
===================================================================
--- trunk/Build/source/texk/tests/TeXLive/TLUtils.pm 2021-05-12 20:04:18 UTC (rev 59175)
+++ trunk/Build/source/texk/tests/TeXLive/TLUtils.pm 2021-05-12 21:49:59 UTC (rev 59176)
@@ -1,4 +1,3 @@
-# $Id: TLUtils.pm 58139 2021-03-05 00:26:37Z preining $
# TeXLive::TLUtils.pm - the inevitable utilities for TeX Live.
# Copyright 2007-2021 Norbert Preining, Reinhard Kotucha
# This file is licensed under the GNU General Public License version 2
@@ -6,7 +5,7 @@
package TeXLive::TLUtils;
-my $svnrev = '$Revision: 58139 $';
+my $svnrev = '$Revision: 59149 $';
my $_modulerevision = ($svnrev =~ m/: ([0-9]+) /) ? $1 : "unknown";
sub module_revision { return $_modulerevision; }
@@ -656,8 +655,8 @@
=item C<system_pipe($prog, $infile, $outfile, $removeIn, @extraargs)>
-Runs C<$prog> with C<@extraargs> redirecting stdin from C<$infile>, stdout to C<$outfile>.
-Removes C<$infile> if C<$removeIn> is true.
+Runs C<$prog> with C<@extraargs> redirecting stdin from C<$infile>,
+stdout to C<$outfile>. Removes C<$infile> if C<$removeIn> is true.
=cut
@@ -2394,7 +2393,7 @@
# quoting issues.
# so fall back on chdir in Perl.
#
- debug("unpacking $tarfile in $targetdir\n");
+ debug("TLUtils::untar: unpacking $tarfile in $targetdir\n");
my $cwd = cwd();
chdir($targetdir) || die "chdir($targetdir) failed: $!";
@@ -2750,7 +2749,7 @@
return \*RETFH;
} else {
if (-r $filetoopen) {
- copy ($filetoopen, $par);
+ copy ("-f", "-L", $filetoopen, $dest);
return 1;
}
return 0;
@@ -2910,7 +2909,7 @@
=cut
sub nulldev {
- return (&win32)? 'nul' : '/dev/null';
+ return (&win32()) ? 'nul' : '/dev/null';
}
=item C<get_full_line ($fh)>
@@ -3913,16 +3912,59 @@
default (specified in L<$TLConfig::TexLiveServerURL>) if we get a
response, else the empty string.
-Neither C<TL_DOWNLOAD_PROGRAM> nor <TL_DOWNLOAD_ARGS> is honored (see
-L<download_file>), since certain options have to be set to do the job
-and the program has to be C<wget> since we parse the output.
+Use C<curl> if it is listed as a C<working_downloader>, else C<wget>,
+else give up. We can't support arbitrary downloaders here, as we do for
+regular package downloads, since certain options have to be set and the
+output has to be parsed.
+We try invoking the program three times (hardwired).
+
=cut
sub query_ctan_mirror {
+ my @working_downloaders = @{$::progs{'working_downloaders'}};
+ ddebug("query_ctan_mirror: working_downloaders: @working_downloaders\n");
+ if (TeXLive::TLUtils::member("curl", @working_downloaders)) {
+ return query_ctan_mirror_curl();
+ } elsif (TeXLive::TLUtils::member("wget", @working_downloaders)) {
+ return query_ctan_mirror_wget();
+ } else {
+ return;
+ }
+}
+
+# curl will follow the redirect chain for us.
+#
+sub query_ctan_mirror_curl {
+ my $max_trial = 3;
+ my $warg = (win32() ? "-w %{url_effective} " : "-w '%{url_effective}' ");
+ for (my $i = 1; $i <= $max_trial; $i++) {
+ # -L -> follow redirects
+ # -s -> silent
+ # -w -> what to output after completion
+ my $cmd = "$::progs{'curl'} -Ls "
+ . "-o " . nulldev() . " "
+ . $warg
+ . "--connect-timeout $NetworkTimeout "
+ . "--max-time $NetworkTimeout "
+ . $TeXLiveServerURL;
+ ddebug("query_ctan_mirror_curl: cmd: $cmd\n");
+ my $url = `$cmd`;
+ if (length $url) {
+ # remove trailing slashes
+ $url =~ s,/*$,,;
+ ddebug("query_ctan_mirror_curl: returning url: $url\n");
+ return $url;
+ }
+ sleep(1);
+ }
+ return;
+}
+
+sub query_ctan_mirror_wget {
my $wget = $::progs{'wget'};
if (!defined ($wget)) {
- tlwarn("query_ctan_mirror: Programs not set up, trying wget\n");
+ tlwarn("query_ctan_mirror_wget: Programs not set up, trying wget\n");
$wget = "wget";
}
@@ -3929,10 +3971,10 @@
# we need the verbose output, so no -q.
# do not reduce retries here, but timeout still seems desirable.
my $mirror = $TeXLiveServerURL;
- my $cmd = "$wget $mirror --timeout=$NetworkTimeout -O "
- . (win32() ? "nul" : "/dev/null") . " 2>&1";
+ my $cmd = "$wget $mirror --timeout=$NetworkTimeout "
+ . "-O " . nulldev() . " 2>&1";
+ ddebug("query_ctan_mirror_wget: cmd is $cmd\n");
- #
# since we are reading the output of wget to find a mirror
# we have to make sure that the locale is unset
my $saved_lcall;
@@ -3950,6 +3992,7 @@
foreach (@out) {
if (m/^Location: (\S*)\s*.*$/) {
(my $mhost = $1) =~ s,/*$,,; # remove trailing slashes since we add it
+ ddebug("query_ctan_mirror_wget: returning url: $mhost\n");
return $mhost;
}
}
@@ -4013,9 +4056,10 @@
sub give_ctan_mirror_base {
# only one backbone has existed for a while (2018).
- my @backbone = qw!http://www.ctan.org/tex-archive!;
+ my @backbone = qw!https://www.ctan.org/tex-archive!;
# start by selecting a mirror and test its operationality
+ ddebug("give_ctan_mirror_base: calling query_ctan_mirror\n");
my $mirror = query_ctan_mirror();
if (!defined($mirror)) {
# three times calling mirror.ctan.org did not give anything useful,
@@ -4541,8 +4585,12 @@
}
-=item C<check_sys_user_mode($user,$sys,$tmfc, $tmfsc, $tmfv, $tmfsv)>
+=item C<setup_sys_user_mode($prg, $optsref, $tmfc, $tmfsc, $tmfv, $tmfsv)>
+Return two-element list C<($texmfconfig,$texmfvar)> of which directories
+to use, either user or sys. If C<$prg> is C<mktexfmt>, and the system
+dirs are writable, use them even if we are in user mode.
+
=cut
sub setup_sys_user_mode {
@@ -4569,7 +4617,8 @@
exit(1);
}
if (!$optsref->{'sys'}) {
- print STDERR "$prg [WARNING]: hidden sys mode found, switching to sys mode.\n" if (!$optsref->{'quiet'});
+ print STDERR "$prg [WARNING]: hidden sys mode found, switching to sys mode.\n"
+ if (!$optsref->{'quiet'});
$optsref->{'sys'} = 1;
}
}
@@ -4579,16 +4628,42 @@
# we are running as updmap-sys, make sure that the right tree is used
$texmfconfig = $TEXMFSYSCONFIG;
$texmfvar = $TEXMFSYSVAR;
+ &debug("TLUtils::setup_sys_user_mode: sys mode\n");
+
} elsif ($optsref->{'user'}) {
$texmfconfig = $TEXMFCONFIG;
$texmfvar = $TEXMFVAR;
+ &debug("TLUtils::setup_sys_user_mode: user mode\n");
+
+ # mktexfmt is run (accidentally or on purpose) by a user with
+ # missing formats; we want to put the resulting format dumps in
+ # TEXMFSYSVAR if possible, so that future format updates will just
+ # work. Until 2021, they were put in TEXMFVAR, causing problems.
+ #
+ # We only do this for mktexfmt, not fmtutil; if fmtutil is called
+ # explicitly with fmtutil -user, ok, do what they said to do.
+ #
+ if ($prg eq "mktexfmt") {
+ my $switchit = 0;
+ if (-d "$TEXMFSYSVAR/web2c") {
+ $switchit = 1 if (-w "$TEXMFSYSVAR/web2c");
+ } elsif (-d $TEXMFSYSVAR && -w $TEXMFSYSVAR) {
+ $switchit = 1;
+ }
+ if ($switchit) {
+ $texmfvar = $TEXMFSYSVAR;
+ &ddebug(" switched to $texmfvar for mktexfmt\n");
+ }
+ }
} else {
- print STDERR "" .
+ print STDERR
"$prg [ERROR]: Either -sys or -user mode is required.\n" .
"$prg [ERROR]: In nearly all cases you should use $prg -sys.\n" .
"$prg [ERROR]: For special cases see https://tug.org/texlive/scripts-sys-user.html\n" ;
exit(1);
}
+
+ &debug(" returning: ($texmfconfig,$texmfvar)\n");
return ($texmfconfig, $texmfvar);
}
Modified: trunk/Build/source/texk/texlive/linked_scripts/texlive/fmtutil.pl
===================================================================
--- trunk/Build/source/texk/texlive/linked_scripts/texlive/fmtutil.pl 2021-05-12 20:04:18 UTC (rev 59175)
+++ trunk/Build/source/texk/texlive/linked_scripts/texlive/fmtutil.pl 2021-05-12 21:49:59 UTC (rev 59176)
@@ -1,5 +1,5 @@
#!/usr/bin/env perl
-# $Id: fmtutil.pl 58961 2021-04-22 00:55:07Z preining $
+# $Id: fmtutil.pl 59143 2021-05-09 02:23:44Z preining $
# fmtutil - utility to maintain format files.
# (Maintained in TeX Live:Master/texmf-dist/scripts/texlive.)
#
@@ -24,11 +24,11 @@
TeX::Update->import();
}
-my $svnid = '$Id: fmtutil.pl 58961 2021-04-22 00:55:07Z preining $';
-my $lastchdate = '$Date: 2021-04-22 02:55:07 +0200 (Thu, 22 Apr 2021) $';
+my $svnid = '$Id: fmtutil.pl 59143 2021-05-09 02:23:44Z preining $';
+my $lastchdate = '$Date: 2021-05-09 04:23:44 +0200 (Sun, 09 May 2021) $';
$lastchdate =~ s/^\$Date:\s*//;
$lastchdate =~ s/ \(.*$//;
-my $svnrev = '$Revision: 58961 $';
+my $svnrev = '$Revision: 59143 $';
$svnrev =~ s/^\$Revision:\s*//;
$svnrev =~ s/\s*\$$//;
my $version = "r$svnrev ($lastchdate)";
@@ -59,7 +59,13 @@
my @deferred_stderr;
my @deferred_stdout;
+# $::opt_verbosity = 3; # manually enable debugging
+my $first_time_creation_in_usermode = 0;
+
+my $DRYRUN = "";
+my $STATUS_FH;
+
(our $prg = basename($0)) =~ s/\.pl$//;
# make sure that the main binary path is available at the front
@@ -89,11 +95,12 @@
}
#
-# these need to be our since they are used from the
-# functions in TLUtils.pm
+# these need to be "our" variables since they are used from the
+# functions in TLUtils.pm.
our $texmfconfig = $TEXMFCONFIG;
our $texmfvar = $TEXMFVAR;
our $alldata;
+
# command line options with defaults
# 20160623 - switch to turn on strict mode
our %opts = ( quiet => 0 , strict => 1 );
@@ -116,6 +123,7 @@
"sys",
"user",
"cnffile=s@",
+ "dry-run|n",
"fmtdir=s",
"no-engine-subdir",
"no-error-if-no-engine=s",
@@ -123,6 +131,7 @@
"nohash",
"recorder",
"refresh",
+ "status-file=s",
"strict!",
"quiet|silent|q",
"catcfg",
@@ -156,13 +165,25 @@
# (and nothing else), since kpathsea can only deal with one.
$mktexfmtMode = 1;
- # TODO TODO
- # which mode are we running in?
- # what happens if root runs mktexfmt?
+ # we default to user mode here, in particular because **if** TEXMFSYSVAR
+ # is writable we will use it to save format dumps created by mktexfmt
+ # If root is running mktexfmt, then most probably the formats will end
+ # up in TEXMFSYSVAR which is fine.
$opts{'user'} = 1;
- GetOptions ( "help" => \$opts{'help'}, "version" => \$opts{'version'} )
- || die "$prg: Unknown option in mktexfmt command line arguments.\n";
+ my @save_argv = @ARGV;
+ GetOptions (
+ "dry-run|n", \$opts{'dry-run'},
+ "help" => \$opts{'help'},
+ "version" => \$opts{'version'}
+ ) || die "$prg: Unknown option in mktexfmt command line: @save_argv\n";
+
+ help() if $opts{'help'};
+ if ($opts{'version'}) {
+ print version();
+ exit 0; # no final print_info
+ }
+
if ($ARGV[0]) {
if ($ARGV[0] =~ m/^(.*)\.(fmt|mem|base?)$/) {
$opts{'byfmt'} = $1;
@@ -214,11 +235,17 @@
}
}
}
+
+ $DRYRUN = "echo " if ($opts{'dry-run'});
+
+ if ($opts{'status-file'}) {
+ open $STATUS_FH, '>>', $opts{'status-file'}
+ || printf STDERR "Cannot open status-file: $opts{'status-file'}\nWill not write status information!\n";
+ }
- # these two functions should go to TLUtils (for use in updmap)
- ($texmfconfig, $texmfvar) =
- TeXLive::TLUtils::setup_sys_user_mode($prg, \%opts,
- $TEXMFCONFIG, $TEXMFSYSCONFIG, $TEXMFVAR, $TEXMFSYSVAR);
+ ($texmfconfig, $texmfvar)
+ = TeXLive::TLUtils::setup_sys_user_mode($prg, \%opts,
+ $TEXMFCONFIG, $TEXMFSYSCONFIG, $TEXMFVAR, $TEXMFSYSVAR);
determine_config_files("fmtutil.cnf");
my $changes_config_file = $alldata->{'changes_config'};
@@ -252,7 +279,7 @@
touch($bakFile);
touch($changes_config_file);
}
- system($editor, $changes_config_file);
+ system("$DRYRUN$editor", $changes_config_file);
$changed = files_are_different($bakFile, $changes_config_file);
} elsif ($opts{'showhyphen'}) {
@@ -311,6 +338,10 @@
return 1;
}
+ if ($STATUS_FH) {
+ close($STATUS_FH) || print STDERR "Cannot close fh for $opts{'status-file'}.\n";
+ }
+
unless ($opts{'nohash'}) {
# TODO should only do this if built something, e.g., not --listcfg
print_info("updating ls-R files\n");
@@ -328,6 +359,12 @@
print Data::Dumper::Dumper($alldata);
}
+#
+sub log_to_status {
+ if ($STATUS_FH) {
+ print $STATUS_FH "@_\n";
+ }
+}
#
callback_build_formats - (re)builds the formats as selected,
# returns exit status or dies. Exit status is always zero unless
@@ -341,39 +378,43 @@
# On W32 it seems that File::Temp creates restrictive permissions (ok)
# that are copied over with the files created inside it (not ok).
# So make our own temp dir.
- my $tmpdir;
- if (win32()) {
- my $foo;
- my $tmp_deflt = File::Spec->tmpdir;
- for my $i (1..5) {
- # $foo = "$texmfvar/temp.$$." . int(rand(1000000));
- $foo = (($texmfvar =~ m!^//!) ? $tmp_deflt : $texmfvar)
- . "/temp.$$." . int(rand(1000000));
- if (! -d $foo) {
- TeXLive::TLUtils::mkdirhier($foo);
- sleep 1;
- if (-d $foo) {
- $tmpdir = $foo;
- last;
+ my $tmpdir = "";
+ if (! $opts{"dry-run"}) {
+ if (win32()) {
+ my $foo;
+ my $tmp_deflt = File::Spec->tmpdir;
+ for my $i (1..5) {
+ # $foo = "$texmfvar/temp.$$." . int(rand(1000000));
+ $foo = (($texmfvar =~ m!^//!) ? $tmp_deflt : $texmfvar)
+ . "/temp.$$." . int(rand(1000000));
+ if (! -d $foo) {
+ TeXLive::TLUtils::mkdirhier($foo);
+ sleep 1;
+ if (-d $foo) {
+ $tmpdir = $foo;
+ last;
+ }
}
}
+ if (! $tmpdir) {
+ die "Cannot get a temporary directory after five iterations, sorry!";
+ }
+ if ($texmfvar =~ m!^//!) {
+ # used File::Spec->tmpdir; fix permissions
+ TeXLive::TLWinGoo::maybe_make_ro ($tmpdir);
+ }
+ } else {
+ $tmpdir = File::Temp::tempdir(CLEANUP => 1);
}
- if (! $tmpdir) {
- die "Cannot get a temporary directory after five iterations ... sorry!";
- }
- if ($texmfvar =~ m!^//!) {
- # used File::Spec->tmpdir; fix permissions
- TeXLive::TLWinGoo::maybe_make_ro ($tmpdir);
- }
- } else {
- $tmpdir = File::Temp::tempdir(CLEANUP => 1);
}
# set up destination directory
$opts{'fmtdir'} ||= "$texmfvar/web2c";
- TeXLive::TLUtils::mkdirhier($opts{'fmtdir'}) if (! -d $opts{'fmtdir'});
- if (! -w $opts{'fmtdir'}) {
- print_error("format directory not writable: $opts{fmtdir}\n");
- exit 1;
+ if (! $opts{"dry-run"}) {
+ TeXLive::TLUtils::mkdirhier($opts{'fmtdir'}) if (! -d $opts{'fmtdir'});
+ if (! -w $opts{'fmtdir'}) {
+ print_error("format directory not writable: $opts{fmtdir}\n");
+ exit 1;
+ }
}
# since the directory does not exist, we can make it absolute with abs_path
# without any trickery around non-existing dirs
@@ -397,7 +438,8 @@
$ENV{'TEXFORMATS'} = "$tmpdir$sep$ENV{TEXFORMATS}";
# switch to temporary directory for format generation
- chdir($tmpdir) || die "Cannot change to directory $tmpdir: $!";
+ $opts{"dry-run"} || chdir($tmpdir)
+ || die "Cannot change to directory $tmpdir: $!";
# we rebuild formats in two rounds:
# round 1: only formats with the same name as engine (pdftex/pdftex)
@@ -418,13 +460,28 @@
next if ($swi eq "format!=engine" && $fmt eq $eng);
$total++;
my $val = select_and_rebuild_format($fmt, $eng, $what, $whatarg);
- if ($val == $FMT_DISABLED) { $disabled++; }
- elsif ($val == $FMT_NOTSELECTED) { $nobuild++; }
- elsif ($val == $FMT_FAILURE) { $err++; push (@err, "$eng/$fmt"); }
- elsif ($val == $FMT_SUCCESS) { $suc++; }
- elsif ($val == $FMT_NOTAVAIL) { $notavail++; }
- else { print_error("callback_build_format (round 1): unknown return "
- . "from select_and_rebuild.\n"); }
+ if ($val == $FMT_DISABLED) {
+ log_to_status("DISABLED", $fmt, $eng, $what, $whatarg);
+ $disabled++;
+ } elsif ($val == $FMT_NOTSELECTED) {
+ log_to_status("NOTSELECTED", $fmt, $eng, $what, $whatarg);
+ $nobuild++;
+ } elsif ($val == $FMT_FAILURE) {
+ log_to_status("FAILURE", $fmt, $eng, $what, $whatarg);
+ $err++;
+ push (@err, "$eng/$fmt");
+ } elsif ($val == $FMT_SUCCESS) {
+ log_to_status("SUCCESS", $fmt, $eng, $what, $whatarg);
+ $suc++;
+ } elsif ($val == $FMT_NOTAVAIL) {
+ log_to_status("NOTAVAIL", $fmt, $eng, $what, $whatarg);
+ $notavail++;
+ }
+ else {
+ log_to_status("UNKNOWN", $fmt, $eng, $what, $whatarg);
+ print_error("callback_build_format (round 1): unknown return "
+ . "from select_and_rebuild.\n");
+ }
}
}
}
@@ -455,7 +512,37 @@
# try to remove the tmpdir with all files
TeXLive::TLUtils::rmtree($tmpdir);
}
- # return
+ #
+ # In case of user mode and formats rebuilt, warn that these formats
+ # will shadow future updates. Can be suppressed with --quiet which
+ # does not show print_info output
+ if ($opts{'user'} && $suc && $first_time_creation_in_usermode) {
+ print_info("
+*************************************************************
+* *
+* WARNING: you are switching to fmtutil's per-user formats. *
+* Please read the following warnings! *
+* *
+*************************************************************
+
+You have run fmtutil-user (as opposed to fmtutil-sys) for the first time;
+this has created format files which are local to your personal account.
+
+From now on, any changes in system formats will *not* be automatically
+reflected in your files; furthermore, running fmtutil-sys will no longer
+have any effect for you.
+
+As a consequence, you yourself have to rerun fmtutil-user after any
+change in the system directories. For example, when one of the LaTeX or
+other format source files changes, which happens frequently.
+See https://tug.org/texlive/scripts-sys-user.html for details.
+
+If you want to undo this, remove the files mentioned above.
+
+Run $prg --help for full documentation of fmtutil.
+");
+ }
+ # return
return $opts{"strict"} ? $err : 0;
}
@@ -519,6 +606,7 @@
}
}
if ($doit) {
+ check_and_warn_on_user_format($fmt,$eng);
return rebuild_one_format($fmt,$eng,$kpsefmt,$destdir,$fmtfile,$logfile);
} else {
return $FMT_NOTSELECTED;
@@ -525,6 +613,21 @@
}
}
+sub check_and_warn_on_user_format {
+ my ($fmt, $eng) = @_;
+ # do nothing if we are updating files in $TEXMFVAR
+ return if ($opts{'fmtdir'} eq $TEXMFVAR);
+ my $saved_fmtdir = $opts{'fmtdir'};
+ $opts{'fmtdir'} = "$TEXMFVAR/web2c";
+ my ($kpsefmt, $destdir, $fmtfile, $logfile) = compute_format_destination($fmt, $eng);
+ if (-r "$destdir/$fmtfile") {
+ print_deferred_warning("you have a shadowing format dump in TEXMFVAR for $fmt/$eng!!!\n");
+ }
+ $opts{'fmtdir'} = $saved_fmtdir;
+}
+
+
+
#
compute_format_destination
# takes fmt/eng and returns the locations where format and log files
# should be saved, that is, a list: (dump file full path, log file full path)
@@ -679,7 +782,7 @@
# in mktexfmtMode we must redirect *all* output to stderr
$cmdline .= " >&2" if $mktexfmtMode;
$cmdline .= " <$nul";
- my $retval = system($cmdline);
+ my $retval = system("$DRYRUN$cmdline");
# report error if it failed.
if ($retval != 0) {
@@ -689,7 +792,7 @@
# Copy the log file after the program is run, so that the log file
# is available to inspect even on failure. So we need the dest dir tree.
- TeXLive::TLUtils::mkdirhier($destdir);
+ TeXLive::TLUtils::mkdirhier($destdir) if ! $opts{"dry-run"};
#
# Here and in the following we use copy instead of move
# to make sure that in SElinux enabled cases the rules of
@@ -698,7 +801,8 @@
if (File::Copy::copy($logfile, "$destdir/$logfile")) {
print_info("log file copied to: $destdir/$logfile\n");
} else {
- print_deferred_error("cannot copy log $logfile to: $destdir\n");
+ print_deferred_error("cannot copy log $logfile to: $destdir\n")
+ unless $opts{"dry-run"};
}
# original shell script did *not* check the return value
@@ -748,8 +852,13 @@
}
my $destfile = "$destdir/$fmtfile";
+ # set flag to warn that new user format was installed
+ # we check whether the next command **would** create a new file,
+ # and if it succeeded, we set the actual flag.
+ my $possibly_warn = ($opts{'user'} && ! -r $destfile);
if (File::Copy::copy($fmtfile, $destfile )) {
print_info("$destfile installed.\n");
+ $first_time_creation_in_usermode = $possibly_warn;
#
# original fmtutil.sh did some magic trick for mplib-luatex.mem
#
@@ -1090,30 +1199,14 @@
}
}
#
- # user mode (no -sys):
- # ====================
- # TEXMFCONFIG $HOME/.texliveYYYY/texmf-config/web2c/$fn
- # TEXMFVAR $HOME/.texliveYYYY/texmf-var/web2c/$fn
- # TEXMFHOME $HOME/texmf/web2c/$fn
- # TEXMFSYSCONFIG $TEXLIVE/YYYY/texmf-config/web2c/$fn
- # TEXMFSYSVAR $TEXLIVE/YYYY/texmf-var/web2c/$fn
- # TEXMFLOCAL $TEXLIVE/texmf-local/web2c/$fn
- # TEXMFDIST $TEXLIVE/YYYY/texmf-dist/web2c/$fn
- #
- # root mode (--sys):
- # ==================
- # TEXMFSYSCONFIG $TEXLIVE/YYYY/texmf-config/web2c/$fn
- # TEXMFSYSVAR $TEXLIVE/YYYY/texmf-var/web2c/$fn
- # TEXMFLOCAL $TEXLIVE/texmf-local/web2c/$fn
- # TEXMFDIST $TEXLIVE/YYYY/texmf-dist/web2c/$fn
+ # See help message for list of locations.
+ @{$opts{'cnffile'}} = @used_files;
#
- @{$opts{'cnffile'}} = @used_files;
- #
# determine the config file that we will use for changes
# if in the list of used files contains either one from
- # TEXMFHOME or TEXMFCONFIG (which is TEXMFSYSCONFIG in the -sys case)
+ # TEXMFHOME or TEXMFCONFIG (TEXMFSYSCONFIG in the -sys case)
# then use the *top* file (which will be either one of the two),
- # if none of the two exists, create a file in TEXMFCONFIG and use it
+ # if neither of the two exists, create a file in TEXMFCONFIG and use it.
my $use_top = 0;
for my $f (@used_files) {
if ($f =~ m!(\Q$TEXMFHOME\E|\Q$texmfconfig\E)/web2c/$fn!) {
@@ -1316,21 +1409,22 @@
Usage: $prg [-user|-sys] [OPTION] ... [COMMAND]
or: $prg-sys [OPTION] ... [COMMAND]
or: $prg-user [OPTION] ... [COMMAND]
- or: mktexfmt FORMAT.fmt|BASE.base|FMTNAME.EXT
+ or: mktexfmt FORMAT.fmt|BASE.base|FMTNAME
Rebuild and manage TeX fmts and Metafont bases, collectively called
"formats" here. (MetaPost no longer uses the past-equivalent "mems".)
+If not operating in mktexfmt mode, exactly one command must be given,
+filename suffixes should generally not be specified, no non-option
+arguments are allowed, and multiple formats can be generated.
+
If the command name ends in mktexfmt, only one format can be created.
The only options supported are --help and --version, and the command
line must be either a format name, with extension, or a plain name that
is passed as the argument to --byfmt (see below). The full name of the
-generated file (if any) is written to stdout, and nothing else.
+generated file (if any) is written to stdout, and nothing else. The
+system directories are used if they are writable, else the user directories.
-If not operating in mktexfmt mode, exactly one command must be given,
-extensions should generally not be specified, no non-option arguments
-are allowed, and multiple formats can be generated, as follows.
-
By default, the return status is zero if all formats requested are
successfully built, else nonzero.
@@ -1340,16 +1434,18 @@
--cnffile FILE read FILE instead of fmtutil.cnf
(can be given multiple times, in which case
all the files are used)
+ --dry-run, -n don't actually build formts
--fmtdir DIR write formats under DIR instead of TEXMF[SYS]VAR
--no-engine-subdir don't use engine-specific subdir of the fmtdir
- --no-error-if-no-format exit successfully if no format is selected
+ --no-error-if-no-format exit successfully if no format is selected
--no-error-if-no-engine=ENGINE1,ENGINE2,...
- exit successfully even if a required engine
+ exit successfully even if a required ENGINE
is missing, if it is included in the list.
--no-strict exit successfully even if a format fails to build
--nohash don't update ls-R files
--recorder pass the -recorder option and save .fls files
--refresh recreate only existing format files
+ --status-file FILE append status information about built formats to FILE
--quiet be silent
--catcfg (does nothing, exists for compatibility)
--dolinks (does nothing, exists for compatibility)
@@ -1362,8 +1458,8 @@
--byengine ENGINE (re)create formats built with ENGINE
--byfmt FORMAT (re)create format FORMAT
--byhyphen HYPHENFILE (re)create formats that depend on HYPHENFILE
- --enablefmt FORMAT[/ENGINE] enable FORMAT, as built with ENGINE
- --disablefmt FORMAT[/ENGINE] disable FORMAT, as built with ENGINE
+ --enablefmt FORMAT[/ENGINE] enable FORMAT, as built with ENGINE
+ --disablefmt FORMAT[/ENGINE] disable FORMAT, as built with ENGINE
If multiple formats have the same name and
different engines, /ENGINE specifier is required.
--listcfg list (enabled and disabled) configurations,
@@ -1376,8 +1472,8 @@
If --cnffile is specified on the command line (possibly multiple
times), its value(s) are used. Otherwise, fmtutil reads all the
- fmtutil.cnf files found by running \`kpsewhich -all fmtutil.cnf', in the
- order returned by kpsewhich. Files passed in via --cnffile are
+ fmtutil.cnf files found by running "kpsewhich -all fmtutil.cnf", in the
+ order returned by kpsewhich. Files specified via --cnffile are
first tried to be loaded directly, and if not found and the file names
don't contain directory parts, are searched via kpsewhich.
@@ -1405,19 +1501,21 @@
(where YYYY is the TeX Live release version).
- According to the actions, fmtutil might write to one of the given files
- or create a new fmtutil.cnf, described further below.
+ According to the actions, fmtutil might update one of the existing cnf
+ files or create a new fmtutil.cnf, as described below.
-Where formats are written:
+Where format files are written:
+
+ By default, format files are (re)written in \$TEXMFSYSVAR/ENGINE by
+ fmtutil-sys, and \$TEXMFVAR/ENGINE by fmtutil-user, where /ENGINE is
+ a subdirectory named for the engine used, such as "pdftex".
+
+ For mktexfmt, TEXMFSYSVAR is used if it is writable, else TEXMFVAR.
- By default, format files are (re)written in TEXMFSYSVAR/ENGINE by
- fmtutil-sys, and TEXMFVAR/ENGINE by fmtutil, where /ENGINE is a
- subdirectory named for the engine used, such as "pdftex".
-
If the --fmtdir=DIR option is specified, DIR is used instead of
TEXMF[SYS]VAR, but the /ENGINE subdir is still used by default.
- In any case, if the --no-engine-subdir option is specified, the
+ In all cases, if the --no-engine-subdir option is specified, the
/ENGINE subdir is omitted.
Where configuration changes are saved:
@@ -1424,13 +1522,14 @@
If config files are given on the command line, then the first one
given will be used to save any changes from --enable or --disable.
+
If the config files are taken from kpsewhich output, then the
- algorithm is more complex:
+ algorithm is more complicated:
- 1) If \$TEXMFCONFIG/web2c/fmtutil.cnf or \$TEXMFHOME/web2c/fmtutil.cnf
- appears in the list of used files, then the one listed first by
- kpsewhich --all (equivalently, the one returned by kpsewhich
- fmtutil.cnf), is used.
+ 1) If \$TEXMFCONFIG/web2c/fmtutil.cnf or
+ \$TEXMFHOME/web2c/fmtutil.cnf appears in the list of used files,
+ then the one listed first by kpsewhich --all (equivalently, the one
+ returned by "kpsewhich fmtutil.cnf"), is used.
2) If neither of the above two are present and changes are made, a
new config file is created in \$TEXMFCONFIG/web2c/fmtutil.cnf.
@@ -1438,7 +1537,7 @@
In general, the idea is that if a given config file is not writable, a
higher-level one can be used. That way, the distribution's settings
can be overridden system-wide using TEXMFLOCAL, and system settings
- can be overridden again in a particular user's TEXMFHOME.
+ can be overridden again in a particular user's TEXMFHOME or TEXMFCONF.
Resolving multiple definitions of a format:
@@ -1449,11 +1548,11 @@
fmtutil.cnf files with higher priority (listed earlier) can disable
formats in lower priority (listed later) fmtutil.cnf files by
- writing a line like
+ writing a line like this in the higher-priority fmtutil.cnf file:
\#! <fmtname> <enginename> <hyphen> <args>
- in the higher-priority fmtutil.cnf file. The \#! must be at the
- beginning of the line, with at least one space or tab afterward, and
- there must be whitespace between each word on the list.
+ The \#! must be at the beginning of the line, with at least one space
+ or tab afterward, and there must be whitespace between each word on
+ the list.
For example, you can disable the luajitlatex format by creating
the file \$TEXMFCONFIG/web2c/fmtutil.cnf with the line
@@ -1460,21 +1559,21 @@
#! luajitlatex luajittex language.dat,language.dat.lua lualatex.ini
(As it happens, the luajittex-related formats are precisely why the
--no-error-if-no-engine option exists, since luajittex cannot be
- compiled on all platforms.)
+ compiled on all platforms. So this is not needed.)
fmtutil-user (fmtutil -user) vs. fmtutil-sys (fmtutil -sys):
- When fmtutil-sys is run or the command line option -sys is used,
- TEXMFSYSCONFIG and TEXMFSYSVAR are used instead of TEXMFCONFIG and
- TEXMFVAR, respectively. This is the primary difference between
+ When fmtutil-sys is run or the command line option -sys is used,
+ TEXMFSYSCONFIG and TEXMFSYSVAR are used instead of TEXMFCONFIG and
+ TEXMFVAR, respectively. This is the primary difference between
fmtutil-sys and fmtutil-user.
- See http://tug.org/texlive/scripts-sys-user.html for details.
+ See https://tug.org/texlive/scripts-sys-user.html for details.
Other locations may be used if you give them on the command line, or
these trees don't exist, or you are not using the original TeX Live.
-Supporting development binaries
+Supporting development binaries:
If an engine name ends with "-dev", formats are created in
the respective directory with the -dev stripped. This allows for
@@ -1482,7 +1581,7 @@
binaries.
Report bugs to: tex-live\@tug.org
-TeX Live home page: <http://tug.org/texlive/>
+TeX Live home page: <https://tug.org/texlive/>
EOF
;
print &version();
Modified: trunk/Build/source/texk/texlive/linked_scripts/texlive/tlmgr.pl
===================================================================
--- trunk/Build/source/texk/texlive/linked_scripts/texlive/tlmgr.pl 2021-05-12 20:04:18 UTC (rev 59175)
+++ trunk/Build/source/texk/texlive/linked_scripts/texlive/tlmgr.pl 2021-05-12 21:49:59 UTC (rev 59176)
@@ -1,12 +1,12 @@
#!/usr/bin/env perl
-# $Id: tlmgr.pl 59108 2021-05-06 22:52:43Z karl $
+# $Id: tlmgr.pl 59154 2021-05-09 22:00:07Z karl $
#
# Copyright 2008-2021 Norbert Preining
# This file is licensed under the GNU General Public License version 2
# or any later version.
-my $svnrev = '$Revision: 59108 $';
-my $datrev = '$Date: 2021-05-07 00:52:43 +0200 (Fri, 07 May 2021) $';
+my $svnrev = '$Revision: 59154 $';
+my $datrev = '$Date: 2021-05-10 00:00:07 +0200 (Mon, 10 May 2021) $';
my $tlmgrrevision;
my $tlmgrversion;
my $prg;
@@ -24,6 +24,7 @@
our $loadmediasrcerror;
our $packagelogfile;
our $packagelogged;
+our $commandslogged;
our $commandlogfile;
our $tlmgr_config_file;
our $pinfile;
@@ -632,6 +633,7 @@
# package related actions (install, remove, update) to
# the package-log file TEXMFSYSVAR/web2c/tlmgr.log
$packagelogged = 0; # how many msgs we logged
+ $commandslogged = 0;
chomp (my $texmfsysvar = `kpsewhich -var-value=TEXMFSYSVAR`);
$packagelogfile = $opts{"package-logfile"};
if ($opts{"usermode"}) {
@@ -699,9 +701,15 @@
my $ret = execute_action($action, @ARGV);
# close the special log file
- if ($packagelogfile && !$::gui_mode) {
- info("$prg: package log updated: $packagelogfile\n") if $packagelogged;
- close(PACKAGELOG);
+ if (!$::gui_mode) {
+ if ($packagelogfile) {
+ info("$prg: package log updated: $packagelogfile\n") if $packagelogged;
+ close(PACKAGELOG);
+ }
+ if ($commandlogfile) {
+ info("$prg: command log updated: $commandlogfile\n") if $commandslogged;
+ close(COMMANDLOG);
+ }
}
# F_ERROR stops processing immediately, and prevents postactions from
@@ -828,6 +836,7 @@
# and show it to the user before the possibly long delay.
info("running $cmd ...\n");
logcommand("running $cmd");
+ logpackage("command: $cmd");
my ($out, $ret);
if ($opts{"dry-run"}) {
$ret = $F_OK;
@@ -867,12 +876,15 @@
my $errors = 0;
my $sysmode = ($opts{"usermode"} ? "-user" : "-sys");
- my $invoke_fmtutil = "fmtutil$sysmode $common_fmtutil_args";
+ my $fmtutil_cmd = "fmtutil$sysmode";
+ my $status_file = TeXLive::TLUtils::tl_tmpfile();
+ my $fmtutil_args = "$common_fmtutil_args --status-file=$status_file";
+
# if create_formats is false (NOT the default) we add --refresh so that
# only existing formats are recreated
if (!$localtlpdb->option("create_formats")) {
- $invoke_fmtutil .= " --refresh";
+ $fmtutil_args .= " --refresh";
debug("refreshing only existing formats per user option (create_formats=0)\n");
}
@@ -973,7 +985,9 @@
for my $e (keys %updated_engines) {
debug ("updating formats based on $e\n");
$errors += do_cmd_and_check
- ("$invoke_fmtutil --no-error-if-no-format --byengine $e");
+ ("$fmtutil_cmd --byengine $e --no-error-if-no-format $fmtutil_args");
+ read_and_report_fmtutil_status_file($status_file);
+ unlink($status_file);
}
# now rebuild all other formats
for my $f (keys %do_enable) {
@@ -981,7 +995,9 @@
# ignore disabled formats
next if !$::execute_actions{'enable'}{'formats'}{$f}{'mode'};
debug ("(re)creating format dump $f\n");
- $errors += do_cmd_and_check ("$invoke_fmtutil --byfmt $f");
+ $errors += do_cmd_and_check ("$fmtutil_cmd --byfmt $f $fmtutil_args");
+ read_and_report_fmtutil_status_file($status_file);
+ unlink($status_file);
$done_formats{$f} = 1;
}
}
@@ -1000,7 +1016,9 @@
$lang = "$TEXMFSYSVAR/tex/generic/config/$lang";
}
if (!$::regenerate_all_formats) {
- $errors += do_cmd_and_check ("$invoke_fmtutil --byhyphen \"$lang\"");
+ $errors += do_cmd_and_check ("$fmtutil_cmd --byhyphen \"$lang\" $fmtutil_args");
+ read_and_report_fmtutil_status_file($status_file);
+ unlink($status_file);
}
}
}
@@ -1010,7 +1028,9 @@
if ($::regenerate_all_formats) {
info("Regenerating existing formats, this may take some time ...");
# --refresh might already be in $invoke_fmtutil, but we don't care
- $errors += do_cmd_and_check("$invoke_fmtutil --refresh --all");
+ $errors += do_cmd_and_check("$fmtutil_cmd --refresh --all $fmtutil_args");
+ read_and_report_fmtutil_status_file($status_file);
+ unlink($status_file);
info("done\n");
$::regenerate_all_formats = 0;
}
@@ -1028,6 +1048,42 @@
}
}
+sub read_and_report_fmtutil_status_file {
+ my $status_file = shift;
+ my $fh;
+ if (!open($fh, '<', $status_file)) {
+ printf STDERR "Cannot read status file $status_file, strange!\n";
+ return;
+ }
+ chomp(my @lines = <$fh>);
+ close $fh;
+ my @failed;
+ my @success;
+ for my $l (@lines) {
+ my ($status, $fmt, $eng, $what, $whatargs) = split(' ', $l, 5);
+ if ($status eq "DISABLED") {
+ # ignore for now
+ } elsif ($status eq "NOTSELECTED") {
+ # ignore for now
+ } elsif ($status eq "FAILURE") {
+ push @failed, "${fmt}.fmt/$eng";
+ } elsif ($status eq "SUCCESS") {
+ push @success, "${fmt}.fmt/$eng";
+ } elsif ($status eq "NOTAVAIL") {
+ # ignore for now
+ } elsif ($status eq "UNKNOWN") {
+ # ignore for now
+ } else {
+ # ignore for now
+ }
+ }
+ logpackage(" OK: @success") if (@success);
+ logpackage(" ERROR: @failed") if (@failed);
+ logcommand(" OK: @success") if (@success);
+ logcommand(" ERROR: @failed") if (@failed);
+ info(" OK: @success\n") if (@success);
+ info(" ERROR: @failed\n") if (@failed);
+}
#
GET_MIRROR
#
@@ -5243,7 +5299,8 @@
#
sub uninstall_texlive {
if (win32()) {
- printf STDERR "Please use \"Add/Remove Programs\" from the Control Panel to removing TeX Live!\n";
+ printf STDERR "Please use \"Add/Remove Programs\" from the Control Panel "
+ . "to uninstall TeX Live!\n";
return ($F_ERROR);
}
return if !check_on_writable();
@@ -5266,54 +5323,62 @@
return ($F_OK | $F_NOPOSTACTION);
}
}
- print ("Ok, removing the whole TL installation under: $tlroot\n");
+ print "Ok, removing the whole TL installation under: $tlroot\n";
- print ("symlinks... ");
+ # Must use kpsewhich before removing it.
+ chomp (my $texmfsysconfig = `kpsewhich -var-value=TEXMFSYSCONFIG`);
+ chomp (my $texmfsysvar = `kpsewhich -var-value=TEXMFSYSVAR`);
+ chomp (my $texmfconfig = `kpsewhich -var-value=TEXMFCONFIG`);
+ chomp (my $texmfvar = `kpsewhich -var-value=TEXMFVAR`);
+
+ print "symlinks... ";
TeXLive::TLUtils::remove_symlinks($localtlpdb->root,
$localtlpdb->platform(),
$localtlpdb->option("sys_bin"),
$localtlpdb->option("sys_man"),
$localtlpdb->option("sys_info"));
- # now remove the rest
- print ("main dirs... ");
+
+ # now remove the rest.
+ print "main dirs... ";
system("rm", "-rf", "$Master/texmf-dist");
system("rm", "-rf", "$Master/texmf-doc");
+ system("rm", "-rf", "$Master/texmf-config");
system("rm", "-rf", "$Master/texmf-var");
system("rm", "-rf", "$Master/tlpkg");
system("rm", "-rf", "$Master/bin");
- print ("misc... ");
+ # In case SYS{VAR,CONFIG} were configured with different values.
+ # Above we remove the hardwired $Master/texmf-{config,var}
+ # if present, assuming the user did not pathologically configure things.
+ system("rm", "-rf", "$texmfsysconfig");
+ system("rm", "-rf", "$texmfsysvar");
+
+ print "misc... ";
system("rm", "-rf", "$Master/readme-html.dir");
system("rm", "-rf", "$Master/readme-txt.dir");
- for my $f (qw/doc.html index.html install-tl
+ for my $f (qw/doc.html index.html install-tl install-tl.log
LICENSE.CTAN LICENSE.TL README README.usergroups
- release-texlive.txt texmf.cnf texmfcnf.lua/) {
+ release-texlive.txt texmf.cnf texmfcnf.lua
+ /) {
system("rm", "-f", "$Master/$f");
}
- if (-d "$Master/temp") {
- finddepth(sub { rmdir; }, "$Master/temp");
- }
- unlink("$Master/install-tl.log");
- # if they want removal, give them removal. Hopefully they know how to
- # regenerate any changed config files.
- system("rm", "-rf", "$Master/texmf-config");
- #
- finddepth(sub { rmdir; }, "$Master");
+ finddepth(sub { rmdir; }, $Master);
+ rmdir($Master);
+ print "done.\n";
- # but not user dirs.
- chomp (my $texmfconfig = `kpsewhich -var-value=TEXMFCONFIG`);
- chomp (my $texmfvar = `kpsewhich -var-value=TEXMFVAR`);
- print <<NOT_REMOVED;
+ # don't remove user dirs, which may have been abused.
+ if (-d $texmfconfig || -d $texmfvar) {
+ print <<NOT_REMOVED;
User directories intentionally not touched, removing them is up to you:
TEXMFCONFIG=$texmfconfig
TEXMFVAR=$texmfvar
-
NOT_REMOVED
+ }
my $remnants;
if (-d $Master) {
- print "\nSorry, something did not get removed, under: $Master\n";
+ print "\nSorry, something did not get removed under: $Master\n";
$remnants = 1;
} else {
$remnants = 0;
@@ -7543,6 +7608,7 @@
}
sub logcommand {
if ($commandlogfile) {
+ $commandslogged++;
my $tim = localtime();
print COMMANDLOG "[$tim] @_\n";
}
@@ -10150,7 +10216,7 @@
distribution (L<https://tug.org/texlive>) and both are licensed under the
GNU General Public License Version 2 or later.
-$Id: tlmgr.pl 59108 2021-05-06 22:52:43Z karl $
+$Id: tlmgr.pl 59154 2021-05-09 22:00:07Z karl $
=cut
# test HTML version: pod2html --cachedir=/tmp tlmgr.pl >/tmp/tlmgr.html
Modified: trunk/Build/source/texk/texlive/linked_scripts/texlive/updmap.pl
===================================================================
--- trunk/Build/source/texk/texlive/linked_scripts/texlive/updmap.pl 2021-05-12 20:04:18 UTC (rev 59175)
+++ trunk/Build/source/texk/texlive/linked_scripts/texlive/updmap.pl 2021-05-12 21:49:59 UTC (rev 59176)
@@ -1,5 +1,5 @@
#!/usr/bin/env perl
-# $Id: updmap.pl 59062 2021-05-03 15:46:54Z karl $
+# $Id: updmap.pl 59152 2021-05-09 21:49:52Z karl $
# updmap - maintain map files for outline fonts.
# (Maintained in TeX Live:Master/texmf-dist/scripts/texlive.)
#
@@ -14,7 +14,7 @@
# the original versions were licensed under the following agreement:
# Anyone may freely use, modify, and/or distribute this file, without
-my $svnid = '$Id: updmap.pl 59062 2021-05-03 15:46:54Z karl $';
+my $svnid = '$Id: updmap.pl 59152 2021-05-09 21:49:52Z karl $';
my $TEXMFROOT;
BEGIN {
@@ -27,10 +27,10 @@
unshift(@INC, "$TEXMFROOT/tlpkg");
}
-my $lastchdate = '$Date: 2021-05-03 17:46:54 +0200 (Mon, 03 May 2021) $';
+my $lastchdate = '$Date: 2021-05-09 23:49:52 +0200 (Sun, 09 May 2021) $';
$lastchdate =~ s/^\$Date:\s*//;
$lastchdate =~ s/ \(.*$//;
-my $svnrev = '$Revision: 59062 $';
+my $svnrev = '$Revision: 59152 $';
$svnrev =~ s/^\$Revision:\s*//;
$svnrev =~ s/\s*\$$//;
my $version = "r$svnrev ($lastchdate)";
Modified: trunk/Build/source/texk/texlive/w32_wrapper/runscript.tlu
===================================================================
--- trunk/Build/source/texk/texlive/w32_wrapper/runscript.tlu 2021-05-12 20:04:18 UTC (rev 59175)
+++ trunk/Build/source/texk/texlive/w32_wrapper/runscript.tlu 2021-05-12 21:49:59 UTC (rev 59176)
@@ -1,7 +1,7 @@
-local svnrevision = string.match("$Revision: 54353 $", "%d+") or "0"
-local svndate = string.match("$Date: 2020-03-16 21:32:20 +0100 (Mon, 16 Mar 2020) $", "[-%d]+") or "2009-12-04"
+local svnrevision = string.match("$Revision: 59060 $", "%d+") or "0"
+local svndate = string.match("$Date: 2021-05-03 05:50:12 +0200 (Mon, 03 May 2021) $", "[-%d]+") or "2009-12-04"
local bannerstr = "runscript wrapper utility (rev. " ..
svnrevision .. ", " .. svndate .. ")\n" ..
"usage: runscript script-name [arguments]\n" ..
@@ -408,7 +408,7 @@
-- creates directory or directory hierarchy
local function mkdir_plus(dir)
- if lfs.mkdir(dir) then
+ if lfs.mkdir(chgstrcp.syscptoutf8(dir)) then
return true
end
-- try with system's mkdir in case we need to create intermediate dirs too
@@ -786,7 +786,7 @@
end
elseif progname == 'dviout' then
local fontsdir = kpse.var_value('TEXMFVAR') .. '/fonts'
- if (lfs.attributes(fontsdir, 'mode') ~= 'directory') then
+ if (lfs.attributes(chgstrcp.syscptoutf8(fontsdir), 'mode') ~= 'directory') then
assert(mkdir_plus(fontsdir))
end
local tfmpath = kpse.show_path('tfm')
@@ -794,13 +794,13 @@
tfmpath = string.gsub(tfmpath, '/', '\\')
local texrt = {}
for d in string.gmatch(tfmpath, '([^;]+\\fonts)\\tfm[^;]*') do
- if (lfs.attributes(d, 'mode') == 'directory') then
+ if (lfs.attributes(chgstrcp.syscptoutf8(d), 'mode') == 'directory') then
table.insert(texrt, d)
end
end
local par = [["-gen=']] .. string.gsub(TEXDIR, '/', '\\') ..
[[\tlpkg\dviout\gen_pk'" "-TEXROOT=']] ..
- table.concat(texrt, ';') .. [['" "-gsx=']] .. GSEXE .. ' -dDELAYSAFER' .. [['"]];
+ table.concat(texrt, ';') .. [['" "-gsx=']] .. GSEXE .. [['"]];
ARGV = {[0]=TEXDIR..'/tlpkg/dviout/dviout.exe', 'dviout', par}
elseif progname == 'mkluatexfontdb' then
progname = 'luaotfload-tool'
@@ -823,7 +823,7 @@
local TW_INIPATH = kpse.var_value('TW_INIPATH') or TW_LIBPATH
os.setenv('TW_LIBPATH', TW_LIBPATH)
os.setenv('TW_INIPATH', TW_INIPATH)
- if (TW_INIPATH and lfs.attributes(TW_INIPATH, 'mode') ~= 'directory') then
+ if (TW_INIPATH and lfs.attributes(chgstrcp.syscptoutf8(TW_INIPATH), 'mode') ~= 'directory') then
-- TeXworks needs directory holding its configuration to exist
assert(mkdir_plus(TW_INIPATH))
end
Modified: trunk/Master/tlpkg/dev/srclist.txt
===================================================================
--- trunk/Master/tlpkg/dev/srclist.txt 2021-05-12 20:04:18 UTC (rev 59175)
+++ trunk/Master/tlpkg/dev/srclist.txt 2021-05-12 21:49:59 UTC (rev 59176)
@@ -13,8 +13,9 @@
#
# The output will be diffs for any files that are not up to date.
-# Basic config files.
-Master/texmf-dist/web2c/texmf.cnf Build/source/texk/kpathsea/
+# Basic config files. texmf.cnf is changed for all of 2021,
+# let's not see it every day.
+#Master/texmf-dist/web2c/texmf.cnf Build/source/texk/kpathsea/
Master/texmf-dist/web2c/fmtutil.cnf Build/source/texk/texlive/tl_support/fmtutil.cnf
# Platform detection for tests:
Modified: trunk/Master/tlpkg/doc/releng.txt
===================================================================
--- trunk/Master/tlpkg/doc/releng.txt 2021-05-12 20:04:18 UTC (rev 59175)
+++ trunk/Master/tlpkg/doc/releng.txt 2021-05-12 21:49:59 UTC (rev 59176)
@@ -129,6 +129,7 @@
then mv into place.
Master/texmf-dist/web2c/texmfcnf.lua
Master/texmf-dist/web2c/texmf.cnf # from Build/.../kpathsea
+ (also ensure that the Build and Master texmf.cnf files are in sync)
5. Ensure version numbers in sources are updated; see list above.
Then install new binaries with tl-update-bindir. Ask tlbuild.
More information about the tex-live-commits
mailing list.