texlive[57552] Master/texmf-dist: multirow (29jan21)
commits+karl at tug.org
commits+karl at tug.org
Fri Jan 29 23:32:12 CET 2021
Revision: 57552
http://tug.org/svn/texlive?view=revision&revision=57552
Author: karl
Date: 2021-01-29 23:32:12 +0100 (Fri, 29 Jan 2021)
Log Message:
-----------
multirow (29jan21)
Modified Paths:
--------------
trunk/Master/texmf-dist/doc/latex/multirow/README
trunk/Master/texmf-dist/doc/latex/multirow/multirow.pdf
trunk/Master/texmf-dist/source/latex/multirow/multirow.dtx
trunk/Master/texmf-dist/tex/latex/multirow/bigdelim.sty
trunk/Master/texmf-dist/tex/latex/multirow/bigstrut.sty
trunk/Master/texmf-dist/tex/latex/multirow/multirow.sty
Modified: trunk/Master/texmf-dist/doc/latex/multirow/README
===================================================================
--- trunk/Master/texmf-dist/doc/latex/multirow/README 2021-01-29 22:31:57 UTC (rev 57551)
+++ trunk/Master/texmf-dist/doc/latex/multirow/README 2021-01-29 22:32:12 UTC (rev 57552)
@@ -1,6 +1,6 @@
-multirow.sty v2.6 2021/01/02
-bigstruts.sty v2.6 2021/01/02
-bigdelim.sty v2.6 2021/01/02
+multirow.sty v2.7 2021/01/29
+bigstruts.sty v2.7 2021/01/29
+bigdelim.sty v2.7 2021/01/29
Original Author: Jerry Leichter
Current Author: Pieter van Oostrum <pieter at vanoostrum.org>
Modified: trunk/Master/texmf-dist/doc/latex/multirow/multirow.pdf
===================================================================
(Binary files differ)
Modified: trunk/Master/texmf-dist/source/latex/multirow/multirow.dtx
===================================================================
--- trunk/Master/texmf-dist/source/latex/multirow/multirow.dtx 2021-01-29 22:31:57 UTC (rev 57551)
+++ trunk/Master/texmf-dist/source/latex/multirow/multirow.dtx 2021-01-29 22:32:12 UTC (rev 57552)
@@ -32,7 +32,7 @@
%<multirow>\ProvidesPackage{multirow}%
%<bigstrut>\ProvidesPackage{bigstrut}
%<bigdelim>\ProvidesPackage{bigdelim}
-%<multirow|bigstrut|bigdelim> [2021/01/02 v2.6
+%<multirow|bigstrut|bigdelim> [2021/01/29 v2.7
%<multirow> Span multiple rows of a table]%
%<bigstrut> Provide larger struts in tabulars]
%<bigdelim> Create big delimiters in tabular or array]
@@ -48,6 +48,7 @@
\usepackage{booktabs}
\usepackage{calc}
\usepackage{url}
+\usepackage[colorlinks, urlcolor=blue, linktocpage]{hyperref}
\usepackage{tikz}
\usepackage{hhline}
\usepackage{etoolbox}
@@ -56,8 +57,8 @@
\DisableCrossrefs
\CodelineIndex
\RecordChanges
-\let\environment\texttt
-\let\Package\textsf
+\newcommand{\env}[1]{\texttt{#1}}
+\newcommand{\Package}[1]{\textsf{#1}}
\def\bsbs{\cs{\char`\\}}
\begin{document}
\DeleteShortVerb{\|}
@@ -115,7 +116,7 @@
%
% \section{Introduction}
% These packages offer a series of extensions to the standard \LaTeX{}
-% \environment{tabular} environment. Their respective functions are:
+% \env{tabular} environment. Their respective functions are:
% \begin{description}
% \item[\Package{multirow}] which provides a construction for table cells
% that span more than one row of the table;
@@ -129,6 +130,14 @@
% \section{Changes in version 2}
% \label{sec:changes-2}
%
+%\subsection*{version 2.7}
+%
+%\begin{itemize}
+%\item Make \cs{@xmultirow} and \cs{multirow at setcolwidth} \cs{long} to allow
+% multi-paragraph text.
+% See \url{https://github.com/pietvo/multirow/issues/1}
+%\end{itemize}
+%
%\subsection*{version 2.6}
%
% \begin{itemize}
@@ -135,7 +144,7 @@
% \item Make the \texttt{supertabular} option compatible with newer
% versions of the \Package{supertabular} package
% \item Initialize \cs{@arstrutbox} when not defined, to enable some
-% uses of the big delims outside of an \environment{array} or \environment{tabular}.
+% uses of the big delims outside of an \env{array} or \env{tabular}.
% \end{itemize}
%
%\subsection*{version 2.5a}
@@ -193,7 +202,7 @@
% \section{Using \Package{multirow}}\label{sec:multirow}
%
% \DescribeMacro{\multirow}
-% \cs{multirow} sets a piece of text in a \environment{tabular} or
+% \cs{multirow} sets a piece of text in a \env{tabular} or
% similar environment, spanning multiple rows. We will call the block of
% rows and columns that the text spans the multirow block. Usually this
% covers one column, but by combining it with \cs{multicolumn} more
@@ -244,13 +253,13 @@
%
% If the width was given as \texttt{*} the text will be set in LR
% mode. If you want a multiline entry in this case you could use a
-% \environment{tabular} or \environment{array} environment in the text
-% parameter. See for example the \environment{minitab} below.
+% \env{tabular} or \env{array} environment in the text
+% parameter. See for example the \env{minitab} below.
%
% The width can also be given as \texttt{=} when the \cs{multirow} entry is given in a
% column that has a defined width, for example in a \texttt{p\{\}} column, an
-% \texttt{X} column in \environment{tabularx} or a \texttt{L}, \texttt{C},
-% \texttt{R} or \texttt{J} column in a \environment{tabulary} environment.
+% \texttt{X} column in \env{tabularx} or a \texttt{L}, \texttt{C},
+% \texttt{R} or \texttt{J} column in a \env{tabulary} environment.
% The text will be set in a \cs{parbox} of that width.
% If you give ``\texttt{=}'' in other situations, you will get strange
% results (usually a too wide column).
@@ -263,11 +272,11 @@
% document writer to include the \Package{calc} package;
% \Package{multirow} does not do this.
%
-% N.B. \cs{multirow} can be used in the \environment{tabular} environment and
-% most derivatives of it, for example \environment{tabularx},
-% \environment{tabulary}, \environment{supertabular}, \environment{ltablex},
-% \environment{xtab}, \environment{longtable}, \environment{tabu},
-% \environment{booktabs} and \environment{ctable}. For some of these you
+% N.B. \cs{multirow} can be used in the \env{tabular} environment and
+% most derivatives of it, for example \env{tabularx},
+% \env{tabulary}, \env{supertabular}, \env{ltablex},
+% \env{xtab}, \env{longtable}, \env{tabu},
+% \env{booktabs} and \env{ctable}. For some of these you
% have to pay special attention to certain cases, see below.
%
% \DescribeMacro{\multirowsetup}
@@ -386,7 +395,7 @@
% \end{quote}
% \vspace{1ex}
% An example with the ``\texttt{=}'' \meta{width} specifier in a
-% \environment{tabulary} (Note: The braces around the \texttt{=} may be omitted):
+% \env{tabulary} (Note: The braces around the \texttt{=} may be omitted):
%
% \begin{quote}
% \index{extrarowheight=\verb!*+\extrarowheight+|usage}
@@ -521,8 +530,8 @@
% chance that the \meta{vmove} will still be correct if you change the point
% size.)
%
-% \cs{multirow} is mainly designed for use with \environment{tabular}, as
-% opposed to \environment{array}, environments. It might not work well in an
+% \cs{multirow} is mainly designed for use with \env{tabular}, as
+% opposed to \env{array}, environments. It might not work well in an
% array environment if there are big formulas in some rows; in that case you can use the
% \meta{vmove} parameter to refine the result.
%
@@ -771,10 +780,10 @@
% \subsection{Use with \Package{longtable}}
% \label{sec:use-with-longtable}
%
-% \index{longtable=\environment{longtable}|usage}
-% \index{longtabu=\environment{longtabu}|usage}
-% It is possible to use \cs{multirow} in a \environment{longtable}
-% environment (as well as in its descendent \environment{longtabu}).
+% \index{longtable=\env{longtable}|usage}
+% \index{longtabu=\env{longtabu}|usage}
+% It is possible to use \cs{multirow} in a \env{longtable}
+% environment (as well as in its descendent \env{longtabu}).
% However, care must be taken that the longtable doesn't break the
% multirow entry when it is near the bottom of the page. For example:
%
@@ -845,8 +854,8 @@
% \subsection{Use with \Package{supertabular}}
% \label{sec:use-with-supertabular}
%
-% \index{supertabular=\environment{supertabular}|usage}
-% \index{xtab=\environment{xtab}|usage}
+% \index{supertabular=\env{supertabular}|usage}
+% \index{xtab=\env{xtab}|usage}
% With the package \Package{supertabular} (or the augmented version
% \Package{xtab}) there is the same requirement
% to keep the rows of a multirow together when a pagebreak occurs.
@@ -855,16 +864,16 @@
% suppress a pagebreak.
% Therefore \Package{multirow} provides a package option
% \texttt{supertabular} that redefines \verb+\\*+ inside a
-% \environment{supertabular} to suppress the pagebreak. You should use
+% \env{supertabular} to suppress the pagebreak. You should use
% this to end the intermediate rows in a multirow block. However, this
-% does not cause \environment{supertabular} to consider breaking the
-% page before the \cs{multirow}, contrary to \environment{longtable}.
+% does not cause \env{supertabular} to consider breaking the
+% page before the \cs{multirow}, contrary to \env{longtable}.
% Thus the table may become too long.
%
% \DescribeMacro{\STneed}
% Therefore when the \texttt{supertabular} option is given,
% \Package{multirow} also provides a command \cs{STneed} to be used
-% in a \environment{supertabular} that specifies how much space we need
+% in a \env{supertabular} that specifies how much space we need
% on the page. Then if there is not enough space, a pagebreak will occur
% at that place. For example:
% \begin{verbatim}
@@ -1091,7 +1100,7 @@
% \cs{bigstrut} in each row, that is 16pt per row, and as a \cs{bigstrut} is
% 2\cs{bigstrutjot}s, we set \cs{bigstrutjot} to 8pt. The
% \Package{booktabs} package adds some extra vertical space around the rules,
-% therefore when using the normal \environment{tabular} environment, it
+% therefore when using the normal \env{tabular} environment, it
% is probably better to make the struts a little bit bigger, or a bit
% smaller with \Package{booktabs}. After some experimentation it appeared
% that a \cs{bigstrutjot} of \texttt{7pt} was enough. Of course we added
@@ -1099,7 +1108,7 @@
% multirow. Please note that this is not possible with our own struts,
% unless we cheat.
%
-% \index{booktabs=\environment{booktabs}|usage}
+% \index{booktabs=\env{booktabs}|usage}
% Now with \Package{booktabs} the code becomes:
% \begin{verbatim}
% \newcommand{\mystrut}{\rule[-8pt]{0pt}{20pt}}
@@ -1174,7 +1183,7 @@
% \DescribeMacro{\bigstrutjot}
% \cs{bigstrut}\oarg{x} produces a strut (a rule with width 0) which is \cs{bigstrutjot}
% (\texttt{2pt} by default) higher, lower, or both than the standard
-% \environment{array}/\environment{tabular} strut. Use it in table entries that are adjacent to
+% \env{array}/\env{tabular} strut. Use it in table entries that are adjacent to
% \cs{hline}s to leave an extra bit of space\,---\,according to the
% TeXbook (page 246), ``This is a little touch that improves the
% appearance of boxed tables; look for it as a mark of quality.''
@@ -1203,7 +1212,7 @@
%
% \section{Using \Package{bigdelim}}
%
-% The package is for working in a \environment{tabular} or \environment{array}
+% The package is for working in a \env{tabular} or \env{array}
% environment, in which the \Package{multirow} package is also used.
%
% \DescribeMacro{\ldelim}
@@ -1213,8 +1222,8 @@
% \cs{ldelim} ( \marg{n}\marg{width}\oarg{text}\\
% \cs{rdelim} ) \marg{n}\marg{width}\oarg{text}
% \end{quote}
-% The commands are used in a column of a \environment{tabular} or
-% \environment{array}; they create a big parenthesis, brace or whatever
+% The commands are used in a column of a \env{tabular} or
+% \env{array}; they create a big parenthesis, brace or whatever
% delimiter that extends over the \meta{n} rows starting at the one
% containing the command. Corresponding cells in the following rows
% must be explicitly given as empty cells.
@@ -1350,7 +1359,7 @@
% \verb|@{}|. The reason is that these color commands extend the color
% to cover the intercolumn spaces on both sides to prevent gaps in the
% color. The size of these so-called \textit{overhangs} is \verb|\tabcolsep| (or
-% \verb|\arraycolsep| when an \environment{array} is used) on each side.
+% \verb|\arraycolsep| when an \env{array} is used) on each side.
% However, when \verb|@{}| is used there is no such intercolumn space
% and the extension covers parts of the previous column.
% This can be cured by setting the left \textit{overhang} explicitly to
@@ -1358,7 +1367,7 @@
% \verb|>{\columncolor{white}[0pt][\tabcolsep]}|. Unfortunately the
% explicit color \texttt{white}, removes the transparency of the column,
% so if there are cells in that column that have no explicit color,
-% these cells are affected. If the background of the \environment{tabular} is
+% these cells are affected. If the background of the \env{tabular} is
% white, this normally will not be noticed, but if the background color
% is changed, for example with the \verb|\pagecolor| command, then that color
% should be used rather than \texttt{white}. Unfortunately, there is no
@@ -1422,7 +1431,9 @@
% www: \url{http://pieter.vanoostrum.org}
% \\[1ex]
% The source code can be found on Github:\\
-% \url{https://github.com/pietvo/multirow}
+% \url{https://github.com/pietvo/multirow}\\
+% Bugs can be reported at\\
+% \url{https://github.com/pietvo/multirow/issues}
%
% \StopEventually{%
% \PrintChanges
@@ -1479,7 +1490,7 @@
% The package option \texttt{longtable} redefines the \cs{cline} macro to
% work around a bug in \Package{longtable}. See section \ref{sec:use-with-longtable}\footnote{%
% Thanks to David Carlisle. See
-% \url{http://tex.stackexchange.com/questions/52100/longtable-multirow-problem-with-cline-and-nopagebreak#answer-52101} }.
+% \href{http://tex.stackexchange.com/questions/52100/longtable-multirow-problem-with-cline-and-nopagebreak\#answer-52101}{his answer on stackexchange}.}.
% First we check if the macro \cs{CT at arc} is defined. If so, this
% indocates that the \Package{colortbl} package is loaded. As
% \Package{colortbl} also redefines \cs{@cline}, we must take this into
@@ -1517,7 +1528,7 @@
% \changes{v1.9b}{2016/09/26}{Implement the \texttt{supertabular} option
% and the \cs{STneed} command.}
% The package option \texttt{supertabular} redefines \verb+\\*+ inside a
-% \environment{supertabular}.
+% \env{supertabular}.
% The redefinition is delayed until the \verb+\begin{document}+.
%
% \changes{v2.6}{2020/12/26}{Adapt the definition to be compatible with
@@ -1536,9 +1547,9 @@
% \end{macrocode}
% \begin{macro}{\ST at tabularcr}
% This macro is the definition of \verb+\\+ inside a
-% \environment{supertabular}. We check for a \verb+*+, and if it is
+% \env{supertabular}. We check for a \verb+*+, and if it is
% present we call our own version, otherwise the
-% \environment{supertabular} version. First we get the older version for
+% \env{supertabular} version. First we get the older version for
% pre-4.1f \texttt{supertabular}, then the newer version.
% \begin{macrocode}
\ifx\ST at save@lineno\undefined
@@ -1549,7 +1560,7 @@
% \end{macro}
% \begin{macro}{\MRST at cr}
% \cs{MRST at cr} is a truncated copy of \cs{ST at cr}. It does all the bookkeeping
-% about the space the \environment{longtable} occupies, but it doesn't
+% about the space the \env{longtable} occupies, but it doesn't
% do the pagebreaking part.
% \begin{macrocode}
\def\MRST at cr{%
@@ -1623,7 +1634,7 @@
% \end{macro}
% \end{macro}
% \begin{macro}{\STneed}
-% This macro can be used in a \environment{supertabular} to indicate how
+% This macro can be used in a \env{supertabular} to indicate how
% much space a multirow entry needs. See section~\ref{sec:use-with-supertabular}.
% \begin{macrocode}
\def\STneed#1{\ifdim\ST at pageleft<#1\ST at newpage\ST at next\fi}
@@ -1659,16 +1670,18 @@
% \begin{macro}{\multirow at setcolwidth}
% This macro calculates \cs{multirow at colwidth} for an entry that has the
% \meta{width} given as ``\texttt{=}''. We check if we are inside a
-% \environment{tabulary} environment, by checking if \cs{TY at final} is defined.
-% If not, then \cs{multirow at colwidth} = \cs{hsize}. The \environment{tabulary}
+% \env{tabulary} environment, by checking if \cs{TY at final} is defined.
+% If not, then \cs{multirow at colwidth} = \cs{hsize}. The \env{tabulary}
% environment will make two passes. On the first pass, we set \cs{multirow at colwidth}
% to the size that the text would have in LR mode (with newlines replaced
-% by spaces), so that \environment{tabulary} will gives us enough space.
+% by spaces), so that \env{tabulary} will gives us enough space.
% On the second pass (characterized by \cs{TY at box} = \cs{TY at box@v}) we use
-% the value that \environment{tabulary} has given us in \cs{hsize}.
+% the value that \env{tabulary} has given us in \cs{hsize}.
% This algorithm is not perfect, but good enough in most cases.
+% \changes{v2.7}{2021/01/29}{Make \cs{multirow at setcolwidth} \cs{long} to allow
+% multi-paragraph text}
% \begin{macrocode}
-\def\multirow at setcolwidth#1{%
+\long\def\multirow at setcolwidth#1{%
\ifx\TY at final\multirow at undefined \multirow at colwidth=\hsize
\else
\ifx\TY at box\TY at box@v\multirow at colwidth=\hsize
@@ -1755,8 +1768,10 @@
% \cs{ifdim} by putting a unit (\texttt{pt}) after the number.
% \changes{v2.4}{2019/01/01}{Support calc compatible expressions for \meta{width} and
% \meta{vmove}.}
+% \changes{v2.7}{2021/01/29}{Make \cs{@xmultirow} \cs{long} to allow
+% multi-paragraph text}
% \begin{macrocode}
-\def\@xmultirow[#1]#2[#3]#4[#5]#6{%
+\long\def\@xmultirow[#1]#2[#3]#4[#5]#6{%
\expandafter\multirow at piii#3\relax\end%
\setlength\multirow at dima{#2\ht\@arstrutbox}%
\addtolength\multirow at dima{#2\dp\@arstrutbox}%
@@ -1870,7 +1885,7 @@
% at the beginning to force horizontal mode}
% \begin{macro}{\bigstrut}
% This macro inserts a strut. Depending on the optional parameter it extends
-% above and/or below the standard \environment{array}/\environment{tabular} strut.
+% above and/or below the standard \env{array}/\env{tabular} strut.
% \begin{macrocode}
\newcommand\bigstrut[1][x]{%
\leavevmode\unskip\@tempdima=\ht\@arstrutbox \@tempdimb=\dp\@arstrutbox
Modified: trunk/Master/texmf-dist/tex/latex/multirow/bigdelim.sty
===================================================================
--- trunk/Master/texmf-dist/tex/latex/multirow/bigdelim.sty 2021-01-29 22:31:57 UTC (rev 57551)
+++ trunk/Master/texmf-dist/tex/latex/multirow/bigdelim.sty 2021-01-29 22:32:12 UTC (rev 57552)
@@ -23,7 +23,7 @@
%%
\NeedsTeXFormat{LaTeX2e}
\ProvidesPackage{bigdelim}
- [2021/01/02 v2.6
+ [2021/01/29 v2.7
Create big delimiters in tabular or array]
\RequirePackage{multirow}
\newcommand\ldelim[3]{\@ifnextchar[{\@ldelim{#1}{#2}{#3}}{\@ldelim{#1}{#2}{#3}[\null]}}
Modified: trunk/Master/texmf-dist/tex/latex/multirow/bigstrut.sty
===================================================================
--- trunk/Master/texmf-dist/tex/latex/multirow/bigstrut.sty 2021-01-29 22:31:57 UTC (rev 57551)
+++ trunk/Master/texmf-dist/tex/latex/multirow/bigstrut.sty 2021-01-29 22:32:12 UTC (rev 57552)
@@ -23,7 +23,7 @@
%%
\NeedsTeXFormat{LaTeX2e}
\ProvidesPackage{bigstrut}
- [2021/01/02 v2.6
+ [2021/01/29 v2.7
Provide larger struts in tabulars]
\@ifundefined{bigstrutjot}{\newdimen\bigstrutjot}{}\bigstrutjot=2pt
\newcommand\bigstrut[1][x]{%
Modified: trunk/Master/texmf-dist/tex/latex/multirow/multirow.sty
===================================================================
--- trunk/Master/texmf-dist/tex/latex/multirow/multirow.sty 2021-01-29 22:31:57 UTC (rev 57551)
+++ trunk/Master/texmf-dist/tex/latex/multirow/multirow.sty 2021-01-29 22:32:12 UTC (rev 57552)
@@ -23,7 +23,7 @@
%%
\NeedsTeXFormat{LaTeX2e}
\ProvidesPackage{multirow}%
- [2021/01/02 v2.6
+ [2021/01/29 v2.7
Span multiple rows of a table]%
\newif\ifmultirowdebug
\DeclareOption{debug}{\multirowdebugtrue}
@@ -118,7 +118,7 @@
\newlength{\multirow at colwidth}
\newcount\multirow at cntb
\newlength\multirow at dima
-\def\multirow at setcolwidth#1{%
+\long\def\multirow at setcolwidth#1{%
\ifx\TY at final\multirow at undefined \multirow at colwidth=\hsize
\else
\ifx\TY at box\TY at box@v\multirow at colwidth=\hsize
@@ -147,7 +147,7 @@
\else \multirow at cntb=#1#2#3%
\fi
\fi}
-\def\@xmultirow[#1]#2[#3]#4[#5]#6{%
+\long\def\@xmultirow[#1]#2[#3]#4[#5]#6{%
\expandafter\multirow at piii#3\relax\end%
\setlength\multirow at dima{#2\ht\@arstrutbox}%
\addtolength\multirow at dima{#2\dp\@arstrutbox}%
More information about the tex-live-commits
mailing list.