texlive[54588] Master/texmf-dist: physunits (27mar20)

commits+karl at tug.org commits+karl at tug.org
Fri Mar 27 22:14:17 CET 2020 

Revision: 54588
          http://tug.org/svn/texlive?view=revision&revision=54588
Author:   karl
Date:     2020-03-27 22:14:17 +0100 (Fri, 27 Mar 2020)
Log Message:
-----------
physunits (27mar20)

Modified Paths:
--------------
    trunk/Master/texmf-dist/doc/latex/physunits/CHANGELOG.md
    trunk/Master/texmf-dist/doc/latex/physunits/physunits.pdf
    trunk/Master/texmf-dist/source/latex/physunits/physunits.dtx
    trunk/Master/texmf-dist/tex/latex/physunits/physunits.sty

Modified: trunk/Master/texmf-dist/doc/latex/physunits/CHANGELOG.md
===================================================================
--- trunk/Master/texmf-dist/doc/latex/physunits/CHANGELOG.md	2020-03-27 21:14:03 UTC (rev 54587)
+++ trunk/Master/texmf-dist/doc/latex/physunits/CHANGELOG.md	2020-03-27 21:14:17 UTC (rev 54588)
@@ -36,4 +36,24 @@
 - modify the makefile to include the new distrubution readme and makefile
 - give instructions on using makefile for distribution
 - Did a little more reformatting in the README.
+## [1.0.3.d] - 2020/01/26
+- there was some issues and mixup with tags in github. This is just a version 
+number change to get the github tags to show up in the right order 
+## [1.0.3.e] - 2020/01/26
+### Changed
+- add a section on just build instructions into readme
+## [1.0.4] - 2020/03/26
+### Changes
+- kcal appeared to accept a prefix, though it was ignored; remove option for the
+macro
+- Celcius, Fahrenheit, and Rankine had the ^\circ outside of the ensuremath,
+causing problems for text mode. The degree symbol is also typically typeset
+with the unit instead of with the number. Correct both of these issues.
+- correct version number and file date in dtx and pdf documentation
+- Make sure \micro macro is compatable with siunitx
+### Added
+- Add acknowledgements to documentation
+- Add bug reporting section to documentation
+- Add prerequisites section to documentation
+- Give some explanation of differences to siunitx in introduction
 

Modified: trunk/Master/texmf-dist/doc/latex/physunits/physunits.pdf
===================================================================
(Binary files differ)

Modified: trunk/Master/texmf-dist/source/latex/physunits/physunits.dtx
===================================================================
--- trunk/Master/texmf-dist/source/latex/physunits/physunits.dtx	2020-03-27 21:14:03 UTC (rev 54587)
+++ trunk/Master/texmf-dist/source/latex/physunits/physunits.dtx	2020-03-27 21:14:17 UTC (rev 54588)
@@ -22,7 +22,7 @@
 %<package>\NeedsTeXFormat{LaTeX2e}[1994/06/01]
 %<package> \ProvidesPackage{physunits}
 %<*package>
-    [2020/01/26 v1.0.3 Physical units package]
+    [2020/03/26 v1.0.4 Physical units package]
 %</package>
 %<package>\ProcessOptions\relax
 %<*driver>
@@ -41,7 +41,7 @@
 %</driver>
 % \fi
 %
-% \CheckSum{486}
+% \CheckSum{490}
 %
 % \CharacterTable
 %  {Upper-case    \A\B\C\D\E\F\G\H\I\J\K\L\M\N\O\P\Q\R\S\T\U\V\W\X\Y\Z
@@ -63,10 +63,12 @@
 % \changes{v1.0.1}{2020/01/25}{Clean up formatting, fix index}
 % \changes{v1.0.2}{2020/01/25}{External changes in makefile}
 % \changes{v1.0.3}{2020/01/26}{External changes in makefile}
+% \changes{v1.0.4}{2020/03/26}{Corrected version number and date in 
+% documentation}
 %
 % \GetFileInfo{physunits.dtx}
-% \DeclareRobustCommand{\fileversion}{v1.0}
-% \DeclareRobustCommand{\filedate}{2020/01/26}
+% \DeclareRobustCommand{\fileversion}{v1.0.4}
+% \DeclareRobustCommand{\filedate}{2020/03/26}
 %
 % \DoNotIndex{\DeclareRobustCommand,\newenvironment,\DeclareRobustCommand,
 %  \left,\right,\textbf,\mathrm,\ensuremath,\units at separator,\expandafter,\,}
@@ -86,6 +88,33 @@
 % physical units that are commonly used in introductory level physics and 
 % astronomy classes. 
 %
+% At present, this package provides some similar units to those in siunitx, but
+% is uses slightly different macro names for each. This package also provides
+% a number of non-SI units (e.g. erg, cm, BTU).
+% 
+%
+% \section{Prerequisites / Dependencies}
+% \changes{v1.0.4}{2020/03/26}{Added section for dependencies.}
+%
+% \subsection{General}
+% This package requires the \verb|physunits| package.%
+%
+% \subsection{Generating Documentation}
+% The \verb|hyperref| package are required to generate the documentation
+% (this file) for this package.
+%
+% \section{Acknowledgements}
+% \changes{v1.0.4}{2020/03/26}{Added section for acknowledgements.}
+%
+% The author would like to thank Brian Dunn for catching bugs in the temperature
+% units and kcal, leading to changes in v1.0.4.
+%
+% \section{Bug Reporting}
+% \changes{v1.0.4}{2020/03/26}{Added section for bug reporting.}
+%
+% Please report bugs or issues in this package using github, at
+% \url{https://github.com/astrobit/physunits/issues}.%
+%
 % \section{Naming Convention}
 %
 % most macros consist of just the commonly used letter or unit, e.g. 
@@ -613,13 +642,17 @@
 %\iffalse
 %<*package>
 %\fi
-% \begin{macro}{\units at separator}
-% |\units at separator| is a special macro used to set the spacing between a
-% quantity and the associated units.
+% \begin{macro}{\micro}
+% \changes{v1.0.4}{2020/03/26}{Corrected version number and date in 
+% documentation}
+% |\micro| is a special macro used to typeset the symbol \textbackslash mu.
+% It is compatable with the \textbackslash micro in siunitx.
 %
 %    \begin{macrocode}
+\ifx\micro\undefined
 \DeclareRobustCommand{\micro}{\ensuremath{%
 \mu}}
+\fi
 %    \end{macrocode}
 % \end{macro}
 %\iffalse
@@ -899,10 +932,12 @@
 %<*package>
 %\fi
 % \begin{macro}{\kcal}
+% \changes{v1.0.4}{2020/03/26}{kcal appeared to take a prefix, but the prefix
+% was ignored; removed the prefix.}
 % |\kcal| is a macro for kilo-calories (kcal).
 %
 %    \begin{macrocode}
-\DeclareRobustCommand{\kcal}[1]{\ensuremath{%
+\DeclareRobustCommand{\kcal}{\ensuremath{%
 \expandafter\units at separator\mathrm{kcal}}}
 %    \end{macrocode}
 % \end{macro}
@@ -1628,11 +1663,15 @@
 %<*package>
 %\fi
 % \begin{macro}{\Celcius}
+% \changes{v1.0.4}{2020/03/26}{had ${}^\circ$ outside of 
+% ensuremath, causing problems for text mode. It is also more common to typeset
+% the $^\circ$ with the unit instead of the number. Corrects both of these 
+% issues}
 % |\Celcius| is a macro for degrees Celcius $(\Celcius)$.
 %
 %    \begin{macrocode}
-\DeclareRobustCommand{\Celcius}{^\circ\ensuremath{%
-\expandafter\units at separator\mathrm{C}}}
+\DeclareRobustCommand{\Celcius}{\ensuremath{\expandafter\units at separator{}%
+^\circ\mathrm{C}}}
 %    \end{macrocode}
 % \end{macro}
 %\iffalse
@@ -1643,11 +1682,15 @@
 %<*package>
 %\fi
 % \begin{macro}{\Rankine}
+% \changes{v1.0.4}{2020/03/26}{had ${}^\circ$ outside of 
+% ensuremath, causing problems for text mode. It is also more common to typeset
+% the $^\circ$ with the unit instead of the number. Corrects both of these 
+% issues}
 % |\Rankine| is a macro for degrees Rankine $(\Rankine)$.
 %
 %    \begin{macrocode}
-\DeclareRobustCommand{\Rankine}{^\circ\ensuremath{%
-\expandafter\units at separator\mathrm{R}}}
+\DeclareRobustCommand{\Rankine}{\ensuremath{%
+\expandafter\units at separator{}^\circ\mathrm{R}}}
 %    \end{macrocode}
 % \end{macro}
 %\iffalse
@@ -1658,11 +1701,15 @@
 %<*package>
 %\fi
 % \begin{macro}{\Fahrenheit}
+% \changes{v1.0.4}{2020/03/26}{had ${}^\circ$ outside of 
+% ensuremath, causing problems for text mode. It is also more common to typeset
+% the $^\circ$ with the unit instead of the number. Corrects both of these 
+% issues}
 % |\Fahrenheit| is a macro for degrees Fahrenheit $(\Fahrenheit)$.
 %
 %    \begin{macrocode}
-\DeclareRobustCommand{\Fahrenheit}{^\circ\ensuremath{%
-\expandafter\units at separator\mathrm{F}}}
+\DeclareRobustCommand{\Fahrenheit}{\ensuremath{%
+\expandafter\units at separator{}^\circ\mathrm{F}}}
 %    \end{macrocode}
 % \end{macro}
 %\iffalse

Modified: trunk/Master/texmf-dist/tex/latex/physunits/physunits.sty
===================================================================
--- trunk/Master/texmf-dist/tex/latex/physunits/physunits.sty	2020-03-27 21:14:03 UTC (rev 54587)
+++ trunk/Master/texmf-dist/tex/latex/physunits/physunits.sty	2020-03-27 21:14:17 UTC (rev 54588)
@@ -22,14 +22,16 @@
 %% 
 \NeedsTeXFormat{LaTeX2e}[1994/06/01]
  \ProvidesPackage{physunits}
-    [2020/01/26 v1.0.3 Physical units package]
+    [2020/03/26 v1.0.4 Physical units package]
 \ProcessOptions\relax
 
 
 \makeatletter
 \DeclareRobustCommand{\units at separator}{\,}
+\ifx\micro\undefined
 \DeclareRobustCommand{\micro}{\ensuremath{%
 \mu}}
+\fi
 \DeclareRobustCommand{\V}[1][ ]{\ensuremath{%
 \expandafter\units at separator\mathrm{#1V}}}
 \DeclareRobustCommand{\Volt}[1][ ]{\ensuremath{%
@@ -62,7 +64,7 @@
 \expandafter\units at separator\mathrm{#1J}}}
 \DeclareRobustCommand{\erg}{\ensuremath{%
 \expandafter\units at separator\mathrm{erg}}}
-\DeclareRobustCommand{\kcal}[1]{\ensuremath{%
+\DeclareRobustCommand{\kcal}{\ensuremath{%
 \expandafter\units at separator\mathrm{kcal}}}
 \DeclareRobustCommand{\Cal}{\ensuremath{%
 \expandafter\units at separator\mathrm{Cal}}}
@@ -161,12 +163,12 @@
 \expandafter\units at separator\mathrm{#1K}}}
 \DeclareRobustCommand{\Kelvin}[1][ ]{\ensuremath{%
 \expandafter\units at separator\mathrm{#1K}}}
-\DeclareRobustCommand{\Celcius}{^\circ\ensuremath{%
-\expandafter\units at separator\mathrm{C}}}
-\DeclareRobustCommand{\Rankine}{^\circ\ensuremath{%
-\expandafter\units at separator\mathrm{R}}}
-\DeclareRobustCommand{\Fahrenheit}{^\circ\ensuremath{%
-\expandafter\units at separator\mathrm{F}}}
+\DeclareRobustCommand{\Celcius}{\ensuremath{\expandafter\units at separator{}%
+^\circ\mathrm{C}}}
+\DeclareRobustCommand{\Rankine}{\ensuremath{%
+\expandafter\units at separator{}^\circ\mathrm{R}}}
+\DeclareRobustCommand{\Fahrenheit}{\ensuremath{%
+\expandafter\units at separator{}^\circ\mathrm{F}}}
 
 \DeclareRobustCommand{\rpm}{\ensuremath{%
 \expandafter\units at separator\mathrm{rev}%

More information about the tex-live-commits mailing list.