texlive[54144] trunk: doc,updates

commits+karl at tug.org commits+karl at tug.org
Sat Mar 7 00:51:39 CET 2020 

Revision: 54144
          http://tug.org/svn/texlive?view=revision&revision=54144
Author:   karl
Date:     2020-03-07 00:51:39 +0100 (Sat, 07 Mar 2020)
Log Message:
-----------
doc,updates

Modified Paths:
--------------
    trunk/Build/source/ChangeLog
    trunk/Build/source/README
    trunk/Master/tlpkg/bin/c2l
    trunk/Master/tlpkg/bin/tl-update-bindir
    trunk/Master/tlpkg/doc/releng.txt

Modified: trunk/Build/source/ChangeLog
===================================================================
--- trunk/Build/source/ChangeLog	2020-03-06 23:51:18 UTC (rev 54143)
+++ trunk/Build/source/ChangeLog	2020-03-06 23:51:39 UTC (rev 54144)
@@ -1,3 +1,7 @@
+2020-03-06  Karl Berry  <karl at tug.org>
+
+	* .travis.yml: attempt to reenable musl build on github.
+
 2020-01-31  Karl Berry  <karl at tug.org>
 
 	* Makefile.am (texlinks_dir): now texk/texlive/tl_support

Modified: trunk/Build/source/README
===================================================================
--- trunk/Build/source/README	2020-03-06 23:51:18 UTC (rev 54143)
+++ trunk/Build/source/README	2020-03-06 23:51:39 UTC (rev 54144)
@@ -39,11 +39,16 @@
     CFLAGS=-D_NETBSD_SOURCE \
     CXXFLAGS='-D_NETBSD_SOURCE -std=c++11' \
     LDFLAGS='-L/usr/X11R7/lib -Wl,-rpath,/usr/X11R7/lib' \
-  ./Build --enable-xindy CLISP=/usr/local/bin/clisp --disable-dvisvgm
+  ./Build --enable-xindy CLISP=/usr/local/bin/clisp
+  Except that we take Nelson's asy build.
 
 i386-freebsd, amd64-freebsd:
   http://anthesphoria.net/FreeBSD/TeXLive-2018/ has details for 2018.
-  2019 built on contextgarden, see below.
+  2019 and forward built on contextgarden (see below).
+  In 2020: FreeBSD 12.1-RELEASE-p1
+  (e.g.,
+https://build.contextgarden.net/#/builders/56/builds/141/steps/2/logs/build _info
+  ) Except that we take Nelson's asy build.
 
 i386-linux: see travis below.
 

Modified: trunk/Master/tlpkg/bin/c2l
===================================================================
--- trunk/Master/tlpkg/bin/c2l	2020-03-06 23:51:18 UTC (rev 54143)
+++ trunk/Master/tlpkg/bin/c2l	2020-03-06 23:51:39 UTC (rev 54144)
@@ -56,7 +56,7 @@
     $arg = "x86_64-linuxmusl";
 
   } elsif ($arg eq "norbert" || $arg eq "nor") {
-    for my $p (qw(i386-linux x86_64-linux)) {
+    for my $p (qw(i386-linux x86_64-linux x86_64-linuxmusl)) {
       system ("$0 $p") && die "norbert/$p failed";
     }
     print "$0: norbert updates done.\n";
@@ -65,7 +65,6 @@
   } elsif ($arg eq "cg" || $arg eq "mojca") {
     for my $p (qw(i386-freebsd amd64-freebsd
                   x86_64-darwinlegacy
-                  x86_64-linuxmusl
                   i386-solaris x86_64-solaris)) {
       system ("$0 $p") && die "cg/$p failed";
     }

Modified: trunk/Master/tlpkg/bin/tl-update-bindir
===================================================================
--- trunk/Master/tlpkg/bin/tl-update-bindir	2020-03-06 23:51:18 UTC (rev 54143)
+++ trunk/Master/tlpkg/bin/tl-update-bindir	2020-03-06 23:51:39 UTC (rev 54144)
@@ -217,7 +217,7 @@
    x86_64-linuxmusl)
     default_bin_loc=$download_loc
     remurl=`curl -s https://api.github.com/repos/TeX-Live/texlive-source/releases/latest | grep browser_download_url | grep texlive-bin-x86_64-musl.tar.gz | cut -d : -f 2,3 | tr -d \"`
-    remurl=http://dl.contextgarden.net/build/texlive/$tlplat.tar.xz
+    #remurl=http://dl.contextgarden.net/build/texlive/$tlplat.tar.xz
     $grab $remurl;;
    x86_64-solaris)
     default_bin_loc=$download_loc

Modified: trunk/Master/tlpkg/doc/releng.txt
===================================================================
--- trunk/Master/tlpkg/doc/releng.txt	2020-03-06 23:51:18 UTC (rev 54143)
+++ trunk/Master/tlpkg/doc/releng.txt	2020-03-06 23:51:39 UTC (rev 54144)
@@ -181,6 +181,37 @@
   Can disable image building again after the initial build for a while.
 
 

+L. It may be that we need to update the "frozen" release while the
+  pretest is going on. To do that, the idea is to make a tag+branch for
+  the last update before switching to the pretest, check that out,
+  and use it for such critical updates. To do that,
+  a) look at https://tug.org/svn/texlive/tags/ to choose the right
+     tag name. For TL19 (during the TL20 pretest), it was texlive-2019.4,
+     since .0-3 were used during the release.
+  b) look at https://tug.org/pipermail/tex-live-commits/ to determine
+     the right revision number: probably the "autoupdate" during the
+     last build before the pretest setup. For TL19, that was 53984.
+  c) run the svn commands given below to create the tag and branch.
+  d) make working checkout of the new branch (at this point we should
+     be fine to wipe out the old branch checkout, if there was one).
+mkdir /home/texlive/branch 
+cd !$
+tlyear=2019
+subnum=4
+nice -19 svn co svn://tug.org/texlive/branches/branch$tlyear.$subnum . >&out
+# the redirect is because there's a lot of output. If there are no
+# errors, just rm out afterwards.
+
+  e) make the required update, probably most easily by copying the
+     affected files from the trunk. Running ctan2tl (c2l) inside the
+     branch checkout should also work, if no other changes have intervened.
+
+  e) Update the tlnet-final directory in historic:
+tlnet_live=/home/ftp/texlive/tlnet
+tlnet_historic=/home/ftp/historic/systems/texlive/2019/tlnet-final
+rsync -av -n $tlnet_live/ $tlnet_historic/ # trailing /'s needed
+# remove the -n after checking that only expected files are updated.
+
 M. As work proceeds, update the doc:
   MetaPost (in texmf-dist), other engine (in source) NEWS.
   Ensure all engine manuals updated in texmf-dist.
@@ -356,15 +387,21 @@
 tex-live @ release made.
 
 - make tag + branch:
-(determine revision number from svn log, in case commits were mistakenly made)
-rev=50896 # svnversion
-this=`date +%Y`; echo $this
+Before: Determine revision number from svn log
+ or https://tug.org/pipermail/tex-live-commits/ 
+ in case commits were mistakenly made.
+Also: look at https://tug.org/svn/texlive/tags/ to get subnum
+ and https://tug.org/svn/texlive/branches/ to avoid duplication.
+rev=53984
+subnum=0 # increase as necessary if multiple branches needed
+tlyear=`date +%Y`; echo $this # might be previous year during pretest, as above
 svn copy -r $rev \
- -m"texlive-$this.0 tag based on r$rev" \
- svn://tug.org/texlive/trunk svn://tug.org/texlive/tags/texlive-$this.0
+ -m"texlive-$tlyear.$subnum tag based on r$rev" \
+ svn://tug.org/texlive/trunk svn://tug.org/texlive/tags/texlive-$tlyear.$subnum
 svn copy -r $rev \
-  -m"branch$this branch based on r$rev" \
-  svn://tug.org/texlive/trunk svn://tug.org/texlive/branches/branch$this
+  -m"branch$tlyear branch based on r$rev" \
+  svn://tug.org/texlive/trunk svn://tug.org/texlive/branches/branch$tlyear
+  # add .$subnum to branch name (and in comment) if making 
 
   It's the same command, just different destinations.
   http://svnbook.red-bean.com/en/1.8/svn.branchmerge.html
@@ -374,6 +411,7 @@
 
   To check out the branch, for critical source fixes for the sake of
   during-the-year rebuilds or for the distros, if they request it:
+this=`date +%Y`; echo $this  # whatever year is appropriate
 cd /home/texlive
 rm -rf branch # when starting a new year on tug
 mkdir branch
@@ -384,7 +422,7 @@
   Do a test build, commit when successful.
   Ask for rebuilds,
   When (enough) rebuilds are done, commit to the branch and make another tag:
-  bcr=nnnnn # branch_commit_revision, e.g., 51236
+  bcr=nnnnn # branch commit revision, e.g., 51236
   bt=n      # branch tag, e.g., 2019.3
 #svn copy -r $bcr -m'texlive-$bt tag based on r$bcr, with <whatever> fix' \
 #   svn://tug.org/texlive/branches/branch2019 \

More information about the tex-live-commits mailing list.