texlive[55547] Master/texmf-dist: thuthesis (15jun20)
commits+karl at tug.org
commits+karl at tug.org
Mon Jun 15 00:17:30 CEST 2020
Revision: 55547
http://tug.org/svn/texlive?view=revision&revision=55547
Author: karl
Date: 2020-06-15 00:17:29 +0200 (Mon, 15 Jun 2020)
Log Message:
-----------
thuthesis (15jun20)
Modified Paths:
--------------
trunk/Master/texmf-dist/doc/latex/thuthesis/figures/scan-statement.pdf
trunk/Master/texmf-dist/doc/latex/thuthesis/latexmkrc
trunk/Master/texmf-dist/doc/latex/thuthesis/spine.pdf
trunk/Master/texmf-dist/doc/latex/thuthesis/thusetup.tex
trunk/Master/texmf-dist/doc/latex/thuthesis/thuthesis-example.pdf
trunk/Master/texmf-dist/doc/latex/thuthesis/thuthesis-example.tex
trunk/Master/texmf-dist/doc/latex/thuthesis/thuthesis.pdf
trunk/Master/texmf-dist/source/latex/thuthesis/thuthesis.dtx
trunk/Master/texmf-dist/tex/latex/thuthesis/thuthesis.cls
Added Paths:
-----------
trunk/Master/texmf-dist/doc/latex/thuthesis/CHANGELOG.md
trunk/Master/texmf-dist/doc/latex/thuthesis/LICENSE
trunk/Master/texmf-dist/doc/latex/thuthesis/Makefile
trunk/Master/texmf-dist/doc/latex/thuthesis/figures/scan-copyright.pdf
trunk/Master/texmf-dist/tex/latex/thuthesis/tsinghua-name-bachelor.pdf
Removed Paths:
-------------
trunk/Master/texmf-dist/doc/latex/thuthesis/dtx-style.sty
trunk/Master/texmf-dist/doc/latex/thuthesis/figures/scan-auth.pdf
trunk/Master/texmf-dist/doc/latex/thuthesis/tsinghua-name-bachelor.pdf
trunk/Master/texmf-dist/source/latex/thuthesis/Makefile
Added: trunk/Master/texmf-dist/doc/latex/thuthesis/CHANGELOG.md
===================================================================
--- trunk/Master/texmf-dist/doc/latex/thuthesis/CHANGELOG.md (rev 0)
+++ trunk/Master/texmf-dist/doc/latex/thuthesis/CHANGELOG.md 2020-06-14 22:17:29 UTC (rev 55547)
@@ -0,0 +1,659 @@
+# Changelog
+
+此处记载了 ThuThesis 中所有值得留意的改动，格式参照 [Keep a Changelog](https://keepachangelog.com/en/1.0.0/)。
+
+点击版本号即可在 GitHub 上查看相邻版本间的代码变动。
+
+## [Unreleased]
+
+## [v6.1.2] - 2020-06-14
+### Changed
+- `\statement` 和 `\copyrightpage` 命令都会在 PDF 中生成相应位置的书签。
+- `\statement` 命令编译生成声明页默认不含页码。
+- `\statement[xxx.pdf]` 插入扫描页时在页脚生成页码，以解决打印版与电子版页码不一致的情况。
+- 使用 `l3build` 编译的版本，在提交到 CTAN 时提供 TDS 结构，以解决编译时 `tsinghua-name-bachelor.pdf` 找不到的问题。
+
+### Added
+- 添加 `\record` 命令用于本科生插入综合论文训练记录表，同时在 PDF 中生成对应书签。
+- 添加选项 `statement-page-number` 控制编译声明页时是否含页码。
+
+### Fixed
+- 修正示例代码中关于 `\statement` 的 typo。
+
+## [v6.1.1] - 2020-06-12
+### Changed
+- 书脊中的西文不再需要调整高度。
+- 修改预生成的隶书版本本科生封面学校名称的文件名为 `tsinghua-name-bachelor.pdf`，不再尝试使用系统字体生成。
+- 将论文示例的文件名更改为 `thuthesis-example.tex / pdf`，以符合 CTAN 的要求。
+
+### Added
+- 添加选项 `include-spine`，允许在正文中插入书脊页（#551）。
+- 添加选项 `spine-title`、`spine-author` 控制书脊的内容。
+- 添加选项 `spine-font` 控制书脊的字号。
+- 添加选项 `output` 选择输出格式为打印版或用于提交的电子版（#553）。
+
+### Fixed
+- 修正书脊的格式。
+- 修复文档中 Changelog 的格式问题。
+
+## [v6.1.0] - 2020-06-08
+### Changed
+- 在 `translation` 环境中使用 `\bibliography` 改为生成参考文献，
+ 对应的原文索引改为 `translation-index` 环境（#529）。
+- 附录的图、表不再加入索引。
+- 使用 `threeparttable` 示例表内脚注。
+- 本科生的目录章标题的西文字母和数字默认使用 Arial（#542）。
+- GitHub repo 所有者更改为清华大学 TUNA 协会。
+- 接管 `ctex` 的 `fontset` 选项，允许更灵活的字体配置（#498）。
+
+### Fixed
+- 本科生附录的调研报告使用英文（#479）。
+- 修正本科生附录的 `algorithm` 和 `listings` 环境的编号格式。
+- 研究生的“使用授权说明”增加一空白页（#504）。
+- 修正 publication 列表行距问题（#507）。
+- 修正研究生目录的行距。
+- 调整本科生封面有辅导教师、联合指导教师时的格式（#522, #537）。
+- 修正本科生封面日期的字体（#532）。
+- 设置三线表横线的默认粗度。
+- 修正文档中关于本科生学科（专业）名称的说明。
+- 允许用户使用文档类选项 `openright`。
+- 修正本科生的“单设一页”格式（#545）。
+- 研究生的正文（main matter）起始于奇数页。
+
+### Added
+- 允许使用边注。
+- 新增 `amsthm` 支持。
+- 支持单个关键词设置样式。
+- 在 `survey` 和 `translation` 环境中生成独立目录。
+- 添加选项 `toc-chapter-style` 控制本科生的目录章标题的西文字体。
+
+## [v6.0.2] - 2020-02-23
+### Fixed
+- 修复图表公式目录内容缺失 (#467)。
+- 修复 Github Actions 执行 l3build check 问题。
+- 文本模式使用 `\checkmark`。
+
+### Added
+- 补充 PDF 元信息：文档标题，语言。
+
+### Changed
+- 补充“著者-出版年”引用命令使用方法。
+- 使用 `xeCJKfntef` 替换 `CJKfntef`。
+
+## [v6.0.1] - 2020-02-03
+### Changed
+- 更新文档。
+- 更新 bib 测试用例。
+
+### Fixed
+- 修复 PDF 目录层级问题 (#457)。
+- 修复 PDF 中章节连接问题 (#453)。
+
+## [v6.0.0] - 2020-01-06
+### Added
+- 新增 `survey`（调研阅读报告）和 `translation`（书面翻译）环境用于本科生的附录，
+ 其中的参考文献引用独立于论文正文（#343）。
+- 新增论文语言选项。
+- 增加 `l3build` 测试。
+
+### Changed
+- 重新设计 `\thusetup` 的接口。
+- 指导教师的姓名和职称用英文逗号分开（#424）。
+- 重新设计封面（题名页）。
+- `\makecover` 拆分为 `\maketitle`、`\copyrightpage`。
+- 中英文摘分别用 `abstract`、`abstract*` 环境生成。
+- 附录使用 `\appendix` 命令开始，不再使用 `appendix` 环境。
+- 修改 `shuji` 为 `spine`。
+- 修改 `acknowledgement` 为 `acknowledgements`。
+- 从 travis 切换到 github actions。
+- 更改日志从 `thuthesis.dtx` 挪到 `CHANGELOG.md`。
+- 整理 Makefile，便于日常使用。
+
+## Removed
+- 移除 `secret` 选项。
+- 移除 `translationbib` 环境。
+- 移除 `tocarialchapter`、`tocarialchapterentry` 和 `tocarialchapterpage` 选项。
+- 只保留 xelatex 编译方式。
+
+### Fixed
+- 修正本科生的文献引用样式。
+- 修正本科生目录章标题的字体。
+- 处理 `hyperref` 与 `unicode-math` 的兼容性问题。
+
+## [v5.5.2] - 2019-04-21
+### Changed
+- 使用 XITS 数学字体。
+
+## [v5.5.1] - 2019-04-16
+### Changed
+- `\thu at textcircled`: 修复 minipage 中 footnote 编号问题。
+
+## [v5.5.0] - 2019-03-15
+### Changed
+- 增加选项使用英文模板。
+- 使用 `unicode-math` 处理数学字体。
+- Windows 的中文字体开启伪粗。
+- `\thu at textcircled`: 去掉 `pifootnote` 选项。
+- 移除 cfg 文件。
+- 修正图表标题与文字之间的距离。
+- `\thu at first@titlepage`: 修正博士后封面的格式。
+- 增加 `nomencl` 宏包的支持。
+
+## [v5.4.5] - 2018-05-17
+### Changed
+- `\normalsize`: 调整公式和正文间距。
+
+## [v5.4.4] - 2018-04-22
+### Changed
+- 删除 `arialtitle`，所有论文格式都一样。
+- 让目录中的引用不影响正文中引用序号。
+- 参考文献列表的页码使用 hyphen 取代 en dash。
+- 参考文献标号左对齐。
+- 允许连续两个文献引用使用连接号。
+
+## [v5.4.2] - 2017-12-18
+### Changed
+- 删除 `\pozhehao`。
+- 使用 degree 取代 type 选项。
+
+## [v5.4.1] - 2017-12-04
+### Changed
+- bst 在 ctan 上不分路径，故加前缀。
+
+## [v5.4.0] - 2017-12-3
+### Changed
+- 基于 `natbib` 的环境调整距离兼容性更好。
+- `\bibliographystyle{<newbib>}` will cause `\bibstyle at newbib` to be called on THE NEXT LATEX RUN (via the aux file).
+
+## [v5.3.2] - 2017-05-01
+### Changed
+- 定理环境格式设置（环境标题和环境正文字体设置）统一放置到 .cfg 文件中。
+
+## [v5.3.1] - 2016-03-20
+### Changed
+- 使用 CTeX 默认中文字体配置，支持不同引擎。
+- `ctex` 默认加载 `CJKspace`。
+- 几乎没人主动安装 Arial 字体。
+
+## [v5.3.0] - 2016-03-11
+### Changed
+- 更新到研究生院 2016.3 指南。
+
+## [v5.2.3] - 2016-02-13
+### Changed
+- `\thu at def@fontsize`: 改写字体定义命令。
+- 安全注释本科公式部分。
+
+## [v5.2.2] - 2016-02-01
+### Changed
+- 不希望 `newtx` 修改 `\@makefnmark`。
+- 利用 `environ` 的 `\Collect at Body`。
+- 目录中标题和页码都是链接。
+- `\thu at textcircled`: 脚注编号每页允许至多 9 个。
+- 基于 `footmisc` 来设置不同位置 footnote marker 样式。
+- `\tableofcontents`: 用 `\patchcmd` 修改 `\@dottedtocline`。
+- 用 `environ` 封装的 `\Collect at Body`。
+
+## [v5.2.1] - 2016-01-14
+### Changed
+- 使用 `newtx` 替换 `txfonts`。
+- 使用 `newtx` 字体。
+- `denotation`: 利用 `enumitem` 改造环境定义，更直观。
+- `acknowledgement`: 用 `acknowledgement` 替换 `ack`。
+
+## [v5.2.0] - 2016-01-11
+### Changed
+- `\title`: 增加 `\title` 排版翻译标题。
+- `translationbib`: 增加翻译文献环境 `translationbib`。
+- `\publicationskip`: 增加 `\publicationskip`。
+
+## [v5.1.0] - 2015-12-27
+### Changed
+- `\thusetup`: 通过 `\thusetup` 统一设置封面信息。
+- `\thu at first@titlepage`: 利用 `CJKfilltwosides` 优化封面排版。
+- `\thu at first@titlepage`: 修改联合指导教师显示问题。
+
+## [v5.0.0] - 2015-12-21
+### Changed
+- 使用 `kvoptions` 简化选项 type。
+- norggedbottom 选项修改为 raggedbottom。
+- 删除 `paralist` 选项。
+- 固定字体设置，同时改善与 `ctex` 兼容性。
+- 不再将页面尺寸写入 dvi，因为已不支持 dvips， 而该方案会使得在使用 tikzexternalize 时外部 PDF 图片 BBox 不对。
+- 用 `geometry` 简化设置。
+- `\ps at thu@headings`: 利用 `fancyhdr` 设置页眉页脚。
+- 修正定理字样为黑体 (#104)。
+- 本科附录图表编号用-不用.（如图A-1，表A-2）。
+- 用 `\ctexset` 来设置，替换复杂的 `\@startsection`。
+- 修正章节间距问题(#57)
+- 硕士博士论文目录只出现到第 3 级标题即可。其他未明确要求。
+- `\tableofcontents`: 修正学位论文中目录里节前缩进(#103)
+- `\makecover`: 使用 `pdfpages` 宏包支持本硕博论文授权说明扫描版(#36)。
+- `acknowledgement`: 使用 pdfpages 宏包支持本硕博论文声明扫描版(#36)。
+- `\inlinecite`: 用 `\inlinecite` 替换 `\onlinecite`。为保证兼 容性，`\onlinecite` 会保留。
+- `achievements`: 博士后就不提在学期间了，不合适(#100)
+- `achievements`: 让简历部分更符合格式指南和示例文件(#122)
+- `\shuji`: 扩展 `\shuji[<标题>][<作者>]`。
+
+## [v4.8.1] - 2014-12-09
+### Changed
+- 按照 CTAN 的要求整理一下文件。
+
+## [v4.8] - 2014-11-25
+### Changed
+- no need to load `indentfirst` directly since we use `ctex`.
+- 内部调用 `ctex` 宏包，自动检测编译引擎。
+- dvips method is deprecated. We ask their users to load it manually.
+- reset baselinestretch after ctex's change.
+- 好几年累积的一些更新，最重要的是切换到 CTeX。
+- v4.7曾经想发布，但是一直没有做，于是就被跳过了，算是造一个段子吧。
+- 增加 noraggedbottom 选项。
+- 添加 nocap 选项，恢复默认标题样式，模板会进一步定制。
+- no need to load amssymb since we use txfonts.
+- 在 CJK 模式下用 `CJKspace` 保留中英文间空格。
+
+## [v4.7] - 2012-06-12
+### Changed
+- 去掉 `hypernat` 依赖，`hyperref` 和 `natbib` 可以很好配合了。
+- 修改本科生页脚间距与样例基本一致。
+- `\ps at thu@headings`: 本科页码用小五号字。
+- 修正本科生作者信息名称。
+- 本科生关键字也用分号分割了。
+- `\thu at first@titlepage`: 硕士中文封面不再需要英文标题。
+- `\thu at first@titlepage`: 本科生题目下划线长度自动适应字数。
+- `\thu at doctor@engcover`: 硕士生新增英文封面。
+- `\makecover`: 硕士论文也需要英文封面。
+- `\thu at makeabstract`: Bachelor sample uses Keywords w/o space `-_-`
+
+## [v4.6] - 2011-10-22
+### Changed
+- 增加博士后文档部分。
+- 使用手册更新。
+- 增加 postdoctor 选项。
+- 增加博士后相关指令。
+- 增加博士后相关配置。
+- `\thu at first@titlepage`: 增加博士后封面。
+- `\makecover`: 博士后报告无授权说明。
+- `resume`: 支持可选参数，自己定义简历章节标题。
+
+## [v4.5.2] - 2010-09-19
+### Changed
+- 研究生页面边距由 3.2cm 改为 3cm。
+- 本科论文日期具体到日。
+- `\makecover`: 本科封面和授权说明之间不要空白页。
+- `\thu at makeabstract`: 本科论文摘要亦无需右开。
+- `acknowledgement`: 研究生论文的致谢和声明终于分开了。
+
+## [v4.5.1] - 2009-01-06
+### Changed
+- 太好了，不用处理 `longtable` 的 `\caption` 了。
+- `\listoftables*`: 更优雅的插图/表格索引，避免跟 `caption` 包冲 突。`\thu at listof` 相应修改。
+
+## [v4.5] - 2009-01-04
+### Changed
+- 加入 XeTeX 支持，需要 `xeCJK`。
+- 彻底转向 UTF-8，并支持 XeLaTeX。
+- 增加 xetex, pdftex 选项。
+- `\shuji`: 简化代码，同时支持 XeLaTeX。
+
+## [v4.4.4] - 2008-06-12
+### Changed
+- 修复了一个从 v4.3 升级到 v4.4 过程中的丢失公式索引的 bug，原修改代码保留备忘。
+
+## [v4.4.3] - 2008-06-09
+### Changed
+- `\thu at first@titlepage`: 修改本科生论文封面格式以符合新样例。
+- `\thu at first@titlepage`: 修改本科生论文封面日期格式以符合新样例。
+
+## [v4.4.2] - 2008-06-07
+### Changed
+- 本科生格式终于也开始用空格作为关键字分隔符了。
+- 本科生签名之间距离改为 `\hskip1em`。
+- `\thu at authorization@mk`: 修改本科生的授权部分，按照 2008 年的新样例。
+- `\thu at makeabstract`: 本科生格式中文关键词采用首行缩进且无悬挂缩进。
+- `\thu at makeabstract`: Bachelor English abstract format requires indent and no hang-indent.
+
+## [v4.4] - 2008-06-18
+### Changed
+- 修复网址断字。
+- `\backmatter`: 本科正文后的页码延续前面的阿拉伯数字，不再用罗马数 字。
+- `\backmatter`: 本科取消了所有页眉。
+- 本科论文终于去掉了**公式**二字。
+- 调整段前距为 -20bp 而不是原来的 -24bp。
+- 修改本科生模板的二级节标题为小四而不是半小四。
+- 调整段前距为 -12bp 而不是原来的 -16bp。
+- 调整段前距为 -12bp 而不是原来的 -16bp。
+- `\tableofcontents`: 本科生目录字号改回`\xiaosi[<1.8>]`。
+- `\tableofcontents`: 本科生目录缩进要求不同。
+- `\tableofcontents`: 本科章目录项一直用黑体 (Arial)。
+
+## [v4.3] - 2008-03-11
+### Changed
+- 子图引用时加括号。
+
+## [v4.2] - 2008-03-07
+### Changed
+- `\eqref` 加括号。
+- 调整证明环境的编号和结尾的方块。
+- `\thu at doctor@engcover`: 博士英文封面补充联合导师。
+
+## [v4.0] - 2007-11-08
+### Changed
+- `\tableofcontents`: 本科研究生目录字号行距都不同。
+- **内部**密级前面终究还是不要五角星了。
+- `\thu at authorization@mk`: 研究生的授权部分调整了一下，不知道老师为什么总爱修改 那些无关紧要的格式，郁闷。感谢 PMHT at newsmth 的认真比对。
+
+## [v3.1] - 2007-10-09
+### Changed
+- 本科的目录又不要 arial 字体了。
+- replace `mathptmx` with `txfonts`.
+- 英文摘要标题要搞特殊化。
+- 博士论文目录只出现到第 3 级标题即可。
+- `\thu at def@term`: 重新定义摘要为环境，long 选项不需要了。
+- 重新定义摘要成为环境。
+- 增强的关键词命令。
+- 去掉配置文件中的 `\hfill`。
+- **内部**密级前面要五角星了。
+- `\thu at first@titlepage`: 重新放置封面表格的提示元素。
+- `\thu at makeabstract`: 研究生关键词不再沉底。
+
+## [v3.0] - 2007-05-13
+### Changed
+- 不用专门为本科论文生成“**提交**”版本了。
+- 没有了综合论文训练页面，很多本科论文专用命令就消失了。
+- 删除 submit 选项。
+- 本科公式又要取消全文统一编号了。
+- `\tableofcontents`: 缩小目录中标题与页码之间**点**之间的距离。
+- `\makecover`: 本科论文评语取消。
+- `\makecover`: 本科论文授权图片扫描取消。
+- `\makecover`: 本科综合论文训练在电子版中取消。
+- `\thu at makeabstract`: **Key words** but not **Keywords**. What are you doing?
+- `acknowledgement`: 本科论文声明部分图片扫描取消。
+
+## [v2.6.4] - 2006-10-23
+### Changed
+- 增加 `neverdecrease` 选项。
+- `\thu at makeabstract`: **Keywords** but not **Key words**.
+- `\listoftables*`: 增加 `\listoffigures*`，`\listoftables*`。
+- `\listofequations*`: 增加 `\listofequations*`。
+- 调整参考文献标签宽度，使得条目增多时仍能对齐。
+
+## [v2.6.3] - 2006-07-01
+### Changed
+- `\thu at makeabstract`: 为本科正确设置目录及以后的页码。
+- `acknowledgement`: 重画双虚线，自适应页面宽度。
+
+## [v2.6.2] - 2006-06-20
+### Changed
+- 改正 groupmembers 的拼写错误。
+- 去掉 `paralist` 的 `newitem` 和 `newenum` 选项，因为默认是打开的。
+- `\thu at def@fontsize`: 引入此命令重新定义字号。
+- 根据不同论文格式显示不同公式编号，并自动加入索引。
+- 增加问题和猜想两个数学环境。
+- `\thu at def@term`: 引入 `\thu at def@term` 定义封面命令。
+- `\thu at first@titlepage`: 如果本科生没有辅导教师则不显示。
+- `\thu at makeabstract`: 取消最后一列的空白。
+- `\thu at makeabstract`: 取消 tabular 环境，用 `\hangindent` 实现关键词 悬挂缩进，英文摘要同。
+- `\thu at makeabstract`: 取消最后一列的空白。
+- `\equcaption`: 此命令配合 `amsmath` 命令基本可以满足所有 公式需要。
+
+## [v2.6.1] - 2006-06-16
+### Changed
+- 取消 `thubib.bst` 中 inbook 类 volume 后的页 码。
+
+## [v2.6] - 2006-06-09
+### Changed
+- 增加 dvipdfm 选项。
+- 增加 `longtable`。
+- 去除 hyperref 选项，等待全局传递。
+- 脚注改成 1.5 倍行距，漂亮。
+- 增加 `\floatsep`，`\@fptop`，`\@fpsep` 和 `\@fpbot`。
+- `\thu at first@titlepage`: 本科生题目加长，最多 24 个字。
+
+## [v2.5.3] - 2006-06-08
+### Changed
+- submit 选项的一个笔误。
+- `\backmatter`: 第一章永远右开。
+- 不管 caption 出现在什么位置，`\aboveskip` 总是出现在标题和浮动体之间的距离。
+- 增加对 `longtable` 的处理。
+- `\thu at makeabstract`: `\pagenumber` 会自动设置页码为 1。
+- `\equcaption`: 取消 `\equcaption` 的参数
+
+## [v2.5.2] - 2006-06-01
+### Changed
+- 更改默认列表距离。
+- 上一个版本忘了把研究生的公式编号排除。
+- `\thu at chapter*`: 定义自己的 `\thu at chapter*`。
+- `\tableofcontents`: 用 `\thu at chapter*` 改写目录命令。
+- `\thu at first@titlepage`: 研究生论文标题中英文用 arial 字体。
+- `\thu at makeabstract`: 在研究生论文中，摘要不出现在目录中，但是要在书签中出现。
+- `acknowledgement`: 研究生致谢右开。
+- `acknowledgement`: 研究生致谢题目是致谢，目录是致谢与声明。
+- `resume`: 研究生的个人介绍要右开。
+
+## [v2.5.1] - 2006-05-28
+### Changed
+- 如果选项设置了 dvips，但是用 PDFLaTeX 编译，报错。
+- 根据教务处的新要求调整附录部分。
+- 参考文献中杂志文章如果没有卷号，那么页码直接跟在 年份后面，并用句点分割。在 `thubib.bst` 中增加 output.year 函数。
+- 如果没有设置格式选项，报错。
+- submit 只能由本科用。
+- 研究生院目录要 times，而教务处要 arial。
+- 本科 openright，研究生 openany。
+- `\backmatter`: 本科正文之后页码即用罗马数字，研究生不变。
+- `\thu at textcircled`: 脚注编号使用 `\textcircled` 命令，每页允许至多 99 个。
+- 本科公式编号前添加**公式**二字。需要修 `amsmath` 极其深的一个命令。
+- 教务处居然要本科论文公式全文编号！
+- 增加 `subfigure` 和 `subtable` 的 caption 配置。
+- 重新定义表格默认字体。
+- 让 `\chapter*` 自动 `\markboth`。
+- `\tableofcontents`: 减小目录项中的导引小点跟页码之间的留白。
+- 硕士封面的冒号前居然有点小距离！
+- `\thu at first@titlepage`: 本科封面标题调整微小的空隙。
+- `\thu at first@titlepage`: 本科封面标题第二行的横线上移一点。
+- `\thu at makeabstract`: 教务处又不要正文前的页眉了。
+- `\thu at makeabstract`: 不管是哪种论文格式，摘要都要右开。
+- `\thu at makeabstract`: 研究生封面英文摘要连续。
+- `\listofequations*`: 公式索引项 numwidth 增加。
+- `resume`: 教务处和研究生院非要搞的不一样！
+
+## [v2.5] - 2006-05-20
+### Changed
+- 对本科论文进行大幅度的重写，因为教务处修改了格式要求。
+- 重新整理代码，使其布局更易读。
+- 增加本科论文的提交选项 submit。
+- `\ps at thu@headings`: 本科的奇偶页眉不同。
+- `\ps at thu@headings`: 增加 empty 页面样式。
+- 修正 minipage 中的脚注。
+- 标题上下间距重调，以前没有考虑 `\intextsep` 的影响。
+- 增加索引名称定义。
+- 取消 `titlesec` 宏包，用基本 LaTeX 命令格式化标题。
+- `\tableofcontents`: 取消 `titletoc` 宏包，用 `\dottedtocline` 调整 目录。
+- 院系和专业分别改名用 department 和 major，代替原来 的 affil 和 subject。
+- `\makecover`: 本科论文评语位置调整。
+- `\makecover`: 综合论文训练在授权说明之后。
+- `acknowledgement`: 本科论文要求致谢声明分页，但是研究生的不分。
+- `\listoftables*`: 增加插图、表格和公式索引。
+- `\listoftables*`: 为了让索引中能出现**图 xxx**，不得不修改 LaTeX内部命令 `\@caption`。
+- `\equcaption`: 将公式编号写入临时文件以便生成公式列表。
+- `\listofequations*`: 增加公式索引命令。
+- 参考文献序号靠左，而不是靠右。
+- 不用 `\CJKcaption`，在导言区直接引入配置文件。
+
+## [v2.4.2] - 2006-04-18
+### Changed
+- 去掉参考文献第二个作者后面烦人的逗号。
+
+## [v2.4.1] - 2006-04-17
+### Changed
+- 2.4 忘了把关键词的 tabular 改成 thu at tabular。
+- 参考文献最后一个作者前是逗号而不是 and。
+
+## [v2.4] - 2006-04-15
+### Changed
+- Fill more pdf info. with `\hypersetup`.
+- 自动隐藏密级为内部时后面的五角星。
+- 增加“注释 (Remark)”环境。
+- 压缩 item 之间的距离。
+- `thubib.bst` 文献标题取消自动小写。
+- 中文参考文献取消 In: Proceedings。
+- 英文文参考文献调整 In: editor, Proceedings。
+- 参考文献为学位论文时，加方括号，作者后面为实心点。
+- 中文参考文献作者超过三个加等。
+- 中文参考文献需要在 bib 中指定 `lang="chinese"`。
+- 学位论文不在需要 type 字段。
+- 为摘要等条目增加书签。
+- 章节的编号用黑体，也就是自动打开 `arialtitle` 选项。
+- 添加模板名称命令。
+- 把页面尺寸写入 dvi，避免有的用户通 过 dvips 不指定页面类型而得到古怪的结果。
+- 表格内容为 11 磅。
+- 图表标题左对齐，取消原先漂亮的 hang 模式。
+- `\thu at makeabstract`: It is **Key words**, but not **Key Words**.
+- `denotation`: 为主要符号表环境增加一个可选参数，调节符号列的宽度。
+- `acknowledgement`: 调整**致谢**等中间的距离。
+- 参考文献间距调小一点，label 长度增加一点，以便让超过 100 的参考文献更好地对齐。
+
+## [v2.3] - 2006-04-09
+### Changed
+- Fix a great bug: `\PassOptionsToClass` and `\LoadClass` rather than `\PassOptionToPackage` and `\LoadPackage`.
+- Reorganize the codes in cover, make the pagestyle more readable.
+- Add gbk2uni into the document.
+- Support `openright` and openany.
+- Adjust `\hypersetup` to remove color and box.
+- Adjust margins again.
+- Adjust references formats.
+- Redefine frontmatter and mainmatter to fit our case.
+- Add assumption environment.
+- Change the brace in the cover.
+
+## [v2.2] - 2006-03-26
+### Changed
+- Adjust margins. How bad it is to simulate MS WORD!.
+- Add bachelor training overview details supporting.
+- CJK support in preamble.
+- Adjust hyperref to avoid boxes around links.
+
+## [v2.1] - 2006-03-03
+### Changed
+- Add support to bachelor thesis.
+- Remove `fancyhdr` and `geometry`.
+- Redefine footnote marks.
+- Replace `thubib.bst` with `chinesebst.bst`.
+- Merge the modification of `ntheorem`.
+- Remove `footmisc` and refine the document.
+- Work very hard on the document.
+- Add `\checklab` code to reduce “unresolved labels“ warning
+- `\ps at thu@headings`: 彻底放弃 fancyhdr，定义自己的样式。
+- 让脚注它悬挂起来，而且中文中用上标，脚注中用正体。
+- `\thu at first@titlepage`: 增加本科部分。
+- `\makecover`: 分成几个小模块来搞，不然这个 macro 太大了，看不过来。
+
+## [v2.0e] - 2005-12-18
+### Changed
+- `denotation`: 主要符号表定义为一个 list，用起来方便。
+
+## [v2.0] - 2005-12-20
+### Changed
+- `\ps at thu@headings`: 以前的太乱了，重新整理过清晰多了。
+- `\tableofcontents`: 附录的目录项需要调整一下。以及公式编号方式等等。
+- 增加了封面密级，增加博士封面支持
+- `\thu at first@titlepage`: 封面的培养单位，学科等内容字距自动调整。
+- `acknowledgement`: 将致谢定义为一个环境更合适，里面也不用像以前段首需 要自己缩进。
+- `resume`: 最后决定将 resume 定义为环境。这样与前面的主要符号 表、致谢等对应。
+
+## [v1.5] - 2005-12-16
+### Changed
+- `acknowledgement`: 在那些不显示编号的章节前面先执行一次 `\cleardoublepage`，使新开章节的页码到达正确的状态。否则会因为 `\addcontentsline` 在 chapter 之前而导致目录页码错误。
+- `resume`: 增加个人简历章节的命令，去掉主文件中需要重新 定义 `\cleardoublepage` 和自己写 `\markboth`，`\addcontentsline` 的部分。
+
+## [v1.4rc1] - 2005-12-14
+### Changed
+- I do not know why `\thu at authorizationaddon` does not work now for v1.3, while it's fine in v1.2. Temporarily, I remove the directive :(. There might be better solution. Other changes: add `config` option to subfig to be compatible with subfigure. add `courier` package for tt font.
+- I have to put all chinese chars into cfg, otherwise they would not appear.
+
+## [v1.4] - 2005-12-05
+### Changed
+- Fix the problem of **chinese**, which is because both CJK and everysel redefine the `\selectfont`. So, a not so good workaround is to merge them up. Add `shuji.tex` example. Add `\pozhehao` command.
+
+## [v1.3] - 2005-11-14
+### Changed
+- Replace `subfigure` with `subfig`, replace `caption2` with `caption`, add details about using figure are in the example.
+
+## [v1.2] - 2005-11-04
+### Changed
+- Remove `fancyref`; Remove `ucite` and implement `\onlinecite`; use package `arial` or `helvet` selectively.
+
+## [v1.1] - 2005-11-03
+### Changed
+- Initial version, migrate from the old ``Bao--Pan'' version. Make the template a class instead of package.
+
+## [v1.0] - 2005-07-06
+### Changed
+- Please refer to ``Bao--Pan'' version.
+
+
+
+[Unreleased]: https://github.com/tuna/thuthesis/compare/v6.1.2...HEAD
+[v6.1.2]: https://github.com/tuna/thuthesis/compare/v6.1.1...v6.1.2
+[v6.1.1]: https://github.com/tuna/thuthesis/compare/v6.1.0...v6.1.1
+[v6.1.0]: https://github.com/tuna/thuthesis/compare/v6.0.2...v6.1.0
+[v6.0.2]: https://github.com/tuna/thuthesis/compare/v6.0.1...v6.0.2
+[v6.0.1]: https://github.com/tuna/thuthesis/compare/v6.0.0...v6.0.1
+[v6.0.0]: https://github.com/tuna/thuthesis/compare/v5.5.2...v6.0.0
+[v5.5.2]: https://github.com/tuna/thuthesis/compare/v5.5.1...v5.5.2
+[v5.5.1]: https://github.com/tuna/thuthesis/compare/v5.5.0...v5.5.1
+[v5.5.0]: https://github.com/tuna/thuthesis/compare/v5.4.5...v5.5.0
+[v5.4.5]: https://github.com/tuna/thuthesis/compare/v5.4.4...v5.4.5
+[v5.4.4]: https://github.com/tuna/thuthesis/compare/v5.4.2...v5.4.4
+[v5.4.2]: https://github.com/tuna/thuthesis/compare/v5.4.1...v5.4.2
+[v5.4.1]: https://github.com/tuna/thuthesis/compare/v5.4.0...v5.4.1
+[v5.4.0]: https://github.com/tuna/thuthesis/compare/v5.3.2...v5.4.0
+[v5.3.2]: https://github.com/tuna/thuthesis/compare/v5.3.1...v5.3.2
+[v5.3.1]: https://github.com/tuna/thuthesis/compare/v5.3.0...v5.3.1
+[v5.3.0]: https://github.com/tuna/thuthesis/compare/v5.2.3...v5.3.0
+[v5.2.3]: https://github.com/tuna/thuthesis/compare/v5.2.2...v5.2.3
+[v5.2.2]: https://github.com/tuna/thuthesis/compare/v5.2.1...v5.2.2
+[v5.2.1]: https://github.com/tuna/thuthesis/compare/v5.2.0...v5.2.1
+[v5.2.0]: https://github.com/tuna/thuthesis/compare/v5.1.0...v5.2.0
+[v5.1.0]: https://github.com/tuna/thuthesis/compare/v5.0.0...v5.1.0
+[v5.0.0]: https://github.com/tuna/thuthesis/compare/v4.8.1...v5.0.0
+[v4.8.1]: https://github.com/tuna/thuthesis/compare/v4.8...v4.8.1
+[v4.8]: https://github.com/tuna/thuthesis/compare/v4.7...v4.8
+[v4.7]: https://github.com/tuna/thuthesis/compare/v4.6...v4.7
+[v4.6]: https://github.com/tuna/thuthesis/compare/v4.5.2...v4.6
+[v4.5.2]: https://github.com/tuna/thuthesis/compare/v4.5.1...v4.5.2
+[v4.5.1]: https://github.com/tuna/thuthesis/compare/v4.5...v4.5.1
+[v4.5]: https://github.com/tuna/thuthesis/compare/v4.4.4...v4.5
+[v4.4.4]: https://github.com/tuna/thuthesis/compare/v4.4.3...v4.4.4
+[v4.4.3]: https://github.com/tuna/thuthesis/compare/v4.4.2...v4.4.3
+[v4.4.2]: https://github.com/tuna/thuthesis/compare/v4.4...v4.4.2
+[v4.4]: https://github.com/tuna/thuthesis/compare/v4.3...v4.4
+[v4.3]: https://github.com/tuna/thuthesis/compare/v4.2...v4.3
+[v4.2]: https://github.com/tuna/thuthesis/compare/v4.0...v4.2
+[v4.0]: https://github.com/tuna/thuthesis/compare/v3.1...v4.0
+[v3.1]: https://github.com/tuna/thuthesis/compare/v3.0...v3.1
+[v3.0]: https://github.com/tuna/thuthesis/compare/v2.6.4...v3.0
+[v2.6.4]: https://github.com/tuna/thuthesis/compare/v2.6.3...v2.6.4
+[v2.6.3]: https://github.com/tuna/thuthesis/compare/v2.6.2...v2.6.3
+[v2.6.2]: https://github.com/tuna/thuthesis/compare/v2.6.1...v2.6.2
+[v2.6.1]: https://github.com/tuna/thuthesis/compare/v2.6...v2.6.1
+[v2.6]: https://github.com/tuna/thuthesis/compare/v2.5.3...v2.6
+[v2.5.3]: https://github.com/tuna/thuthesis/compare/v2.5.2...v2.5.3
+[v2.5.2]: https://github.com/tuna/thuthesis/compare/v2.5.1...v2.5.2
+[v2.5.1]: https://github.com/tuna/thuthesis/compare/v2.5...v2.5.1
+[v2.5]: https://github.com/tuna/thuthesis/compare/v2.4.2...v2.5
+[v2.4.2]: https://github.com/tuna/thuthesis/compare/v2.4.1...v2.4.2
+[v2.4.1]: https://github.com/tuna/thuthesis/compare/v2.4...v2.4.1
+[v2.4]: https://github.com/tuna/thuthesis/compare/v2.3...v2.4
+[v2.3]: https://github.com/tuna/thuthesis/compare/v2.2...v2.3
+[v2.2]: https://github.com/tuna/thuthesis/compare/v2.1...v2.2
+[v2.1]: https://github.com/tuna/thuthesis/compare/v2.0e...v2.1
+[v2.0e]: https://github.com/tuna/thuthesis/compare/v2.0...v2.0e
+[v2.0]: https://github.com/tuna/thuthesis/compare/v1.5...v2.0
+[v1.5]: https://github.com/tuna/thuthesis/compare/v1.4rc1...v1.5
+[v1.4rc1]: https://github.com/tuna/thuthesis/compare/v1.4...v1.4rc1
+[v1.4]: https://github.com/tuna/thuthesis/compare/v1.3...v1.4
+[v1.3]: https://github.com/tuna/thuthesis/compare/v1.2...v1.3
+[v1.2]: https://github.com/tuna/thuthesis/compare/v1.1...v1.2
+[v1.1]: https://github.com/tuna/thuthesis/compare/v1.0...v1.1
+[v1.0]: https://github.com/tuna/thuthesis/releases/tag/v1.0
Property changes on: trunk/Master/texmf-dist/doc/latex/thuthesis/CHANGELOG.md
___________________________________________________________________
Added: svn:eol-style
## -0,0 +1 ##
+native
\ No newline at end of property
Added: trunk/Master/texmf-dist/doc/latex/thuthesis/LICENSE
===================================================================
--- trunk/Master/texmf-dist/doc/latex/thuthesis/LICENSE (rev 0)
+++ trunk/Master/texmf-dist/doc/latex/thuthesis/LICENSE 2020-06-14 22:17:29 UTC (rev 55547)
@@ -0,0 +1,416 @@
+The LaTeX Project Public License
+=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
+
+LPPL Version 1.3c 2008-05-04
+
+Copyright 1999 2002-2008 LaTeX3 Project
+ Everyone is allowed to distribute verbatim copies of this
+ license document, but modification of it is not allowed.
+
+
+PREAMBLE
+========
+
+The LaTeX Project Public License (LPPL) is the primary license under
+which the LaTeX kernel and the base LaTeX packages are distributed.
+
+You may use this license for any work of which you hold the copyright
+and which you wish to distribute. This license may be particularly
+suitable if your work is TeX-related (such as a LaTeX package), but
+it is written in such a way that you can use it even if your work is
+unrelated to TeX.
+
+The section `WHETHER AND HOW TO DISTRIBUTE WORKS UNDER THIS LICENSE',
+below, gives instructions, examples, and recommendations for authors
+who are considering distributing their works under this license.
+
+This license gives conditions under which a work may be distributed
+and modified, as well as conditions under which modified versions of
+that work may be distributed.
+
+We, the LaTeX3 Project, believe that the conditions below give you
+the freedom to make and distribute modified versions of your work
+that conform with whatever technical specifications you wish while
+maintaining the availability, integrity, and reliability of
+that work. If you do not see how to achieve your goal while
+meeting these conditions, then read the document `cfgguide.tex'
+and `modguide.tex' in the base LaTeX distribution for suggestions.
+
+
+DEFINITIONS
+===========
+
+In this license document the following terms are used:
+
+ `Work'
+ Any work being distributed under this License.
+
+ `Derived Work'
+ Any work that under any applicable law is derived from the Work.
+
+ `Modification'
+ Any procedure that produces a Derived Work under any applicable
+ law -- for example, the production of a file containing an
+ original file associated with the Work or a significant portion of
+ such a file, either verbatim or with modifications and/or
+ translated into another language.
+
+ `Modify'
+ To apply any procedure that produces a Derived Work under any
+ applicable law.
+
+ `Distribution'
+ Making copies of the Work available from one person to another, in
+ whole or in part. Distribution includes (but is not limited to)
+ making any electronic components of the Work accessible by
+ file transfer protocols such as FTP or HTTP or by shared file
+ systems such as Sun's Network File System (NFS).
+
+ `Compiled Work'
+ A version of the Work that has been processed into a form where it
+ is directly usable on a computer system. This processing may
+ include using installation facilities provided by the Work,
+ transformations of the Work, copying of components of the Work, or
+ other activities. Note that modification of any installation
+ facilities provided by the Work constitutes modification of the Work.
+
+ `Current Maintainer'
+ A person or persons nominated as such within the Work. If there is
+ no such explicit nomination then it is the `Copyright Holder' under
+ any applicable law.
+
+ `Base Interpreter'
+ A program or process that is normally needed for running or
+ interpreting a part or the whole of the Work.
+
+ A Base Interpreter may depend on external components but these
+ are not considered part of the Base Interpreter provided that each
+ external component clearly identifies itself whenever it is used
+ interactively. Unless explicitly specified when applying the
+ license to the Work, the only applicable Base Interpreter is a
+ `LaTeX-Format' or in the case of files belonging to the
+ `LaTeX-format' a program implementing the `TeX language'.
+
+
+
+CONDITIONS ON DISTRIBUTION AND MODIFICATION
+===========================================
+
+1. Activities other than distribution and/or modification of the Work
+are not covered by this license; they are outside its scope. In
+particular, the act of running the Work is not restricted and no
+requirements are made concerning any offers of support for the Work.
+
+2. You may distribute a complete, unmodified copy of the Work as you
+received it. Distribution of only part of the Work is considered
+modification of the Work, and no right to distribute such a Derived
+Work may be assumed under the terms of this clause.
+
+3. You may distribute a Compiled Work that has been generated from a
+complete, unmodified copy of the Work as distributed under Clause 2
+above, as long as that Compiled Work is distributed in such a way that
+the recipients may install the Compiled Work on their system exactly
+as it would have been installed if they generated a Compiled Work
+directly from the Work.
+
+4. If you are the Current Maintainer of the Work, you may, without
+restriction, modify the Work, thus creating a Derived Work. You may
+also distribute the Derived Work without restriction, including
+Compiled Works generated from the Derived Work. Derived Works
+distributed in this manner by the Current Maintainer are considered to
+be updated versions of the Work.
+
+5. If you are not the Current Maintainer of the Work, you may modify
+your copy of the Work, thus creating a Derived Work based on the Work,
+and compile this Derived Work, thus creating a Compiled Work based on
+the Derived Work.
+
+6. If you are not the Current Maintainer of the Work, you may
+distribute a Derived Work provided the following conditions are met
+for every component of the Work unless that component clearly states
+in the copyright notice that it is exempt from that condition. Only
+the Current Maintainer is allowed to add such statements of exemption
+to a component of the Work.
+
+ a. If a component of this Derived Work can be a direct replacement
+ for a component of the Work when that component is used with the
+ Base Interpreter, then, wherever this component of the Work
+ identifies itself to the user when used interactively with that
+ Base Interpreter, the replacement component of this Derived Work
+ clearly and unambiguously identifies itself as a modified version
+ of this component to the user when used interactively with that
+ Base Interpreter.
+
+ b. Every component of the Derived Work contains prominent notices
+ detailing the nature of the changes to that component, or a
+ prominent reference to another file that is distributed as part
+ of the Derived Work and that contains a complete and accurate log
+ of the changes.
+
+ c. No information in the Derived Work implies that any persons,
+ including (but not limited to) the authors of the original version
+ of the Work, provide any support, including (but not limited to)
+ the reporting and handling of errors, to recipients of the
+ Derived Work unless those persons have stated explicitly that
+ they do provide such support for the Derived Work.
+
+ d. You distribute at least one of the following with the Derived Work:
+
+ 1. A complete, unmodified copy of the Work;
+ if your distribution of a modified component is made by
+ offering access to copy the modified component from a
+ designated place, then offering equivalent access to copy
+ the Work from the same or some similar place meets this
+ condition, even though third parties are not compelled to
+ copy the Work along with the modified component;
+
+ 2. Information that is sufficient to obtain a complete,
+ unmodified copy of the Work.
+
+7. If you are not the Current Maintainer of the Work, you may
+distribute a Compiled Work generated from a Derived Work, as long as
+the Derived Work is distributed to all recipients of the Compiled
+Work, and as long as the conditions of Clause 6, above, are met with
+regard to the Derived Work.
+
+8. The conditions above are not intended to prohibit, and hence do not
+apply to, the modification, by any method, of any component so that it
+becomes identical to an updated version of that component of the Work as
+it is distributed by the Current Maintainer under Clause 4, above.
+
+9. Distribution of the Work or any Derived Work in an alternative
+format, where the Work or that Derived Work (in whole or in part) is
+then produced by applying some process to that format, does not relax or
+nullify any sections of this license as they pertain to the results of
+applying that process.
+
+10. a. A Derived Work may be distributed under a different license
+ provided that license itself honors the conditions listed in
+ Clause 6 above, in regard to the Work, though it does not have
+ to honor the rest of the conditions in this license.
+
+ b. If a Derived Work is distributed under a different license, that
+ Derived Work must provide sufficient documentation as part of
+ itself to allow each recipient of that Derived Work to honor the
+ restrictions in Clause 6 above, concerning changes from the Work.
+
+11. This license places no restrictions on works that are unrelated to
+the Work, nor does this license place any restrictions on aggregating
+such works with the Work by any means.
+
+12. Nothing in this license is intended to, or may be used to, prevent
+complete compliance by all parties with all applicable laws.
+
+
+NO WARRANTY
+===========
+
+There is no warranty for the Work. Except when otherwise stated in
+writing, the Copyright Holder provides the Work `as is', without
+warranty of any kind, either expressed or implied, including, but not
+limited to, the implied warranties of merchantability and fitness for a
+particular purpose. The entire risk as to the quality and performance
+of the Work is with you. Should the Work prove defective, you assume
+the cost of all necessary servicing, repair, or correction.
+
+In no event unless required by applicable law or agreed to in writing
+will The Copyright Holder, or any author named in the components of the
+Work, or any other party who may distribute and/or modify the Work as
+permitted above, be liable to you for damages, including any general,
+special, incidental or consequential damages arising out of any use of
+the Work or out of inability to use the Work (including, but not limited
+to, loss of data, data being rendered inaccurate, or losses sustained by
+anyone as a result of any failure of the Work to operate with any other
+programs), even if the Copyright Holder or said author or said other
+party has been advised of the possibility of such damages.
+
+
+MAINTENANCE OF THE WORK
+=======================
+
+The Work has the status `author-maintained' if the Copyright Holder
+explicitly and prominently states near the primary copyright notice in
+the Work that the Work can only be maintained by the Copyright Holder
+or simply that it is `author-maintained'.
+
+The Work has the status `maintained' if there is a Current Maintainer
+who has indicated in the Work that they are willing to receive error
+reports for the Work (for example, by supplying a valid e-mail
+address). It is not required for the Current Maintainer to acknowledge
+or act upon these error reports.
+
+The Work changes from status `maintained' to `unmaintained' if there
+is no Current Maintainer, or the person stated to be Current
+Maintainer of the work cannot be reached through the indicated means
+of communication for a period of six months, and there are no other
+significant signs of active maintenance.
+
+You can become the Current Maintainer of the Work by agreement with
+any existing Current Maintainer to take over this role.
+
+If the Work is unmaintained, you can become the Current Maintainer of
+the Work through the following steps:
+
+ 1. Make a reasonable attempt to trace the Current Maintainer (and
+ the Copyright Holder, if the two differ) through the means of
+ an Internet or similar search.
+
+ 2. If this search is successful, then enquire whether the Work
+ is still maintained.
+
+ a. If it is being maintained, then ask the Current Maintainer
+ to update their communication data within one month.
+
+ b. If the search is unsuccessful or no action to resume active
+ maintenance is taken by the Current Maintainer, then announce
+ within the pertinent community your intention to take over
+ maintenance. (If the Work is a LaTeX work, this could be
+ done, for example, by posting to comp.text.tex.)
+
+ 3a. If the Current Maintainer is reachable and agrees to pass
+ maintenance of the Work to you, then this takes effect
+ immediately upon announcement.
+
+ b. If the Current Maintainer is not reachable and the Copyright
+ Holder agrees that maintenance of the Work be passed to you,
+ then this takes effect immediately upon announcement.
+
+ 4. If you make an `intention announcement' as described in 2b. above
+ and after three months your intention is challenged neither by
+ the Current Maintainer nor by the Copyright Holder nor by other
+ people, then you may arrange for the Work to be changed so as
+ to name you as the (new) Current Maintainer.
+
+ 5. If the previously unreachable Current Maintainer becomes
+ reachable once more within three months of a change completed
+ under the terms of 3b) or 4), then that Current Maintainer must
+ become or remain the Current Maintainer upon request provided
+ they then update their communication data within one month.
+
+A change in the Current Maintainer does not, of itself, alter the fact
+that the Work is distributed under the LPPL license.
+
+If you become the Current Maintainer of the Work, you should
+immediately provide, within the Work, a prominent and unambiguous
+statement of your status as Current Maintainer. You should also
+announce your new status to the same pertinent community as
+in 2b) above.
+
+
+WHETHER AND HOW TO DISTRIBUTE WORKS UNDER THIS LICENSE
+======================================================
+
+This section contains important instructions, examples, and
+recommendations for authors who are considering distributing their
+works under this license. These authors are addressed as `you' in
+this section.
+
+Choosing This License or Another License
+----------------------------------------
+
+If for any part of your work you want or need to use *distribution*
+conditions that differ significantly from those in this license, then
+do not refer to this license anywhere in your work but, instead,
+distribute your work under a different license. You may use the text
+of this license as a model for your own license, but your license
+should not refer to the LPPL or otherwise give the impression that
+your work is distributed under the LPPL.
+
+The document `modguide.tex' in the base LaTeX distribution explains
+the motivation behind the conditions of this license. It explains,
+for example, why distributing LaTeX under the GNU General Public
+License (GPL) was considered inappropriate. Even if your work is
+unrelated to LaTeX, the discussion in `modguide.tex' may still be
+relevant, and authors intending to distribute their works under any
+license are encouraged to read it.
+
+A Recommendation on Modification Without Distribution
+-----------------------------------------------------
+
+It is wise never to modify a component of the Work, even for your own
+personal use, without also meeting the above conditions for
+distributing the modified component. While you might intend that such
+modifications will never be distributed, often this will happen by
+accident -- you may forget that you have modified that component; or
+it may not occur to you when allowing others to access the modified
+version that you are thus distributing it and violating the conditions
+of this license in ways that could have legal implications and, worse,
+cause problems for the community. It is therefore usually in your
+best interest to keep your copy of the Work identical with the public
+one. Many works provide ways to control the behavior of that work
+without altering any of its licensed components.
+
+How to Use This License
+-----------------------
+
+To use this license, place in each of the components of your work both
+an explicit copyright notice including your name and the year the work
+was authored and/or last substantially modified. Include also a
+statement that the distribution and/or modification of that
+component is constrained by the conditions in this license.
+
+Here is an example of such a notice and statement:
+
+ %% pig.dtx
+ %% Copyright 2005 M. Y. Name
+ %
+ % This work may be distributed and/or modified under the
+ % conditions of the LaTeX Project Public License, either version 1.3
+ % of this license or (at your option) any later version.
+ % The latest version of this license is in
+ % http://www.latex-project.org/lppl.txt
+ % and version 1.3 or later is part of all distributions of LaTeX
+ % version 2005/12/01 or later.
+ %
+ % This work has the LPPL maintenance status `maintained'.
+ %
+ % The Current Maintainer of this work is M. Y. Name.
+ %
+ % This work consists of the files pig.dtx and pig.ins
+ % and the derived file pig.sty.
+
+Given such a notice and statement in a file, the conditions
+given in this license document would apply, with the `Work' referring
+to the three files `pig.dtx', `pig.ins', and `pig.sty' (the last being
+generated from `pig.dtx' using `pig.ins'), the `Base Interpreter'
+referring to any `LaTeX-Format', and both `Copyright Holder' and
+`Current Maintainer' referring to the person `M. Y. Name'.
+
+If you do not want the Maintenance section of LPPL to apply to your
+Work, change `maintained' above into `author-maintained'.
+However, we recommend that you use `maintained', as the Maintenance
+section was added in order to ensure that your Work remains useful to
+the community even when you can no longer maintain and support it
+yourself.
+
+Derived Works That Are Not Replacements
+---------------------------------------
+
+Several clauses of the LPPL specify means to provide reliability and
+stability for the user community. They therefore concern themselves
+with the case that a Derived Work is intended to be used as a
+(compatible or incompatible) replacement of the original Work. If
+this is not the case (e.g., if a few lines of code are reused for a
+completely different task), then clauses 6b and 6d shall not apply.
+
+
+Important Recommendations
+-------------------------
+
+ Defining What Constitutes the Work
+
+ The LPPL requires that distributions of the Work contain all the
+ files of the Work. It is therefore important that you provide a
+ way for the licensee to determine which files constitute the Work.
+ This could, for example, be achieved by explicitly listing all the
+ files of the Work near the copyright notice of each file or by
+ using a line such as:
+
+ % This work consists of all files listed in manifest.txt.
+
+ in that place. In the absence of an unequivocal list it might be
+ impossible for the licensee to determine what is considered by you
+ to comprise the Work and, in such a case, the licensee would be
+ entitled to make reasonable conjectures as to which files comprise
+ the Work.
+
Added: trunk/Master/texmf-dist/doc/latex/thuthesis/Makefile
===================================================================
--- trunk/Master/texmf-dist/doc/latex/thuthesis/Makefile (rev 0)
+++ trunk/Master/texmf-dist/doc/latex/thuthesis/Makefile 2020-06-14 22:17:29 UTC (rev 55547)
@@ -0,0 +1,88 @@
+# Makefile for ThuThesis
+
+PACKAGE = thuthesis
+THESIS = thuthesis-example
+SPINE = spine
+
+SOURCES = $(PACKAGE).ins $(PACKAGE).dtx
+CLSFILE = dtx-style.sty $(PACKAGE).cls
+
+LATEXMK = latexmk
+SHELL := /bin/bash
+NPM ?= npm
+
+# make deletion work on Windows
+ifdef SystemRoot
+ RM = del /Q
+else
+ RM = rm -f
+endif
+
+.PHONY: all all-dev clean distclean dist thesis viewthesis spine viewspine doc viewdoc cls check save savepdf test FORCE_MAKE
+
+thesis: $(THESIS).pdf
+
+all: thesis spine
+
+all-dev: doc all
+
+cls: $(CLSFILE)
+
+$(CLSFILE): $(SOURCES)
+ xetex $(PACKAGE).ins
+
+doc: $(PACKAGE).pdf
+
+spine: $(SPINE).pdf
+
+$(PACKAGE).pdf: cls FORCE_MAKE
+ $(LATEXMK) $(PACKAGE).dtx
+
+$(THESIS).pdf: cls FORCE_MAKE
+ $(LATEXMK) $(THESIS)
+
+$(SPINE).pdf: cls FORCE_MAKE
+ $(LATEXMK) $(SPINE)
+
+viewdoc: doc
+ $(LATEXMK) -pv $(PACKAGE).dtx
+
+viewthesis: thesis
+ $(LATEXMK) -pv $(THESIS)
+
+viewspine: spine
+ $(LATEXMK) -pv $(SPINE)
+
+save:
+ bash testfiles/save.sh
+
+savepdf:
+ bash testfiles/save-pdf.sh
+
+test:
+ l3build check
+
+clean:
+ $(LATEXMK) -c $(PACKAGE).dtx $(THESIS) $(SPINE)
+ -@$(RM) -rf *~ main-survey.* main-translation.* _markdown_thuthesis* thuthesis.markdown.*
+
+cleanall: clean
+ -@$(RM) $(PACKAGE).pdf $(THESIS).pdf $(SPINE).pdf
+
+distclean: cleanall
+ -@$(RM) $(CLSFILE)
+ -@$(RM) -r dist
+
+check: FORCE_MAKE
+ifeq ($(version),)
+ @echo "Error: version missing: \"make [check|dist] version=X.Y.Z\""; exit 1
+else
+ @[[ $(shell grep -E -c '$(version) Tsinghua University Thesis Template|\\def\\version\{$(version)\}' thuthesis.dtx) -eq 3 ]] || (echo "update version in thuthesis.dtx before release"; exit 1)
+ @[[ $(shell grep -E -c '"version": "$(version)"' package.json) -eq 1 ]] || (echo "update version in package.json before release"; exit 1)
+endif
+
+dist: check all-dev
+ # use l3build for CTAN release (zip with .tds.zip)
+ l3build ctan --config build-ctan
+ # use gulp for GitHub release (zip with generated file)
+ $(NPM) run build -- --version=$(version)
Property changes on: trunk/Master/texmf-dist/doc/latex/thuthesis/Makefile
___________________________________________________________________
Added: svn:eol-style
## -0,0 +1 ##
+native
\ No newline at end of property
Deleted: trunk/Master/texmf-dist/doc/latex/thuthesis/dtx-style.sty
===================================================================
--- trunk/Master/texmf-dist/doc/latex/thuthesis/dtx-style.sty 2020-06-14 21:13:23 UTC (rev 55546)
+++ trunk/Master/texmf-dist/doc/latex/thuthesis/dtx-style.sty 2020-06-14 22:17:29 UTC (rev 55547)
@@ -1,216 +0,0 @@
-%%
-%% This is file `dtx-style.sty',
-%% generated with the docstrip utility.
-%%
-%% The original source files were:
-%%
-%% thuthesis.dtx (with options: `dtx-style')
-%%
-%% This is a generated file.
-%%
-%% Copyright (C) 2005-2020 by Ruini Xue <xueruini at gmail.com>
-%%
-%% This work may be distributed and/or modified under the
-%% conditions of the LaTeX Project Public License, either version 1.3
-%% of this license or (at your option) any later version.
-%% The latest version of this license is in
-%% http://www.latex-project.org/lppl.txt
-%% and version 1.3 or later is part of all distributions of LaTeX
-%% version 2005/12/01 or later.
-%%
-%% To produce the documentation run the original source files ending with `.dtx'
-%% through LaTeX.
-%%
-\newcommand\thu at error[1]{%
- \ClassError{thuthesis}{#1}{}%
-}
-\@ifl at t@r\fmtversion{2017/04/15}{}{
- \thu at error{%
- TeX Live 2017 or later version is required to compile this document%
- }
-}
-\RequirePackage{iftex}
-\ifXeTeX\else
- \thu at error{XeLaTeX is required to compile this document}
-\fi
-\ProvidesPackage{dtx-style}
-\RequirePackage{hypdoc}
-\RequirePackage{ifthen}
-\RequirePackage{fontspec}[2017/01/20]
-\RequirePackage{amsmath}
-\RequirePackage{unicode-math}
-\RequirePackage[UTF8,scheme=chinese]{ctex}
-\RequirePackage[
- top=2.5cm, bottom=2.5cm,
- left=4cm, right=2cm,
- headsep=3mm]{geometry}
-\RequirePackage{hologo}
-\RequirePackage{array,longtable,booktabs}
-\RequirePackage{listings}
-\RequirePackage{fancyhdr}
-\RequirePackage{xcolor}
-\RequirePackage{enumitem}
-\RequirePackage{etoolbox}
-\RequirePackage{metalogo}
-\RequirePackage[tightLists=false]{markdown}
-
-\markdownSetup{
- renderers = {
- link = {\href{#2}{#1}},
- }
-}
-
-\hypersetup{
- pdflang = zh-CN,
- pdftitle = {ThuThesis：清华大学学位论文模板},
- pdfauthor = {清华大学 TUNA 协会},
- pdfsubject = {清华大学学位论文模板使用说明},
- pdfkeywords = {论文模板; 清华大学; 使用说明},
- pdfdisplaydoctitle = true
-}%
-
-\ifthenelse{\equal{\@nameuse{g__ctex_fontset_tl}}{mac}}{
- \setmainfont{Palatino}
- \setsansfont[Scale=MatchLowercase]{Helvetica}
- \setmonofont[Scale=MatchLowercase]{Menlo}
- \xeCJKsetwidth{‘’“”}{1em}
-}{
- \setmainfont[
- Extension = .otf,
- UprightFont = *-regular,
- BoldFont = *-bold,
- ItalicFont = *-italic,
- BoldItalicFont = *-bolditalic,
- ]{texgyrepagella}
- \setsansfont[
- Extension = .otf,
- UprightFont = *-regular,
- BoldFont = *-bold,
- ItalicFont = *-italic,
- BoldItalicFont = *-bolditalic,
- ]{texgyreheros}
- \setmonofont[
- Extension = .otf,
- UprightFont = *-regular,
- BoldFont = *-bold,
- ItalicFont = *-italic,
- BoldItalicFont = *-bolditalic,
- Scale = MatchLowercase,
- ]{texgyrecursor}
-}
-\unimathsetup{
- math-style=ISO,
- bold-style=ISO,
-}
-\IfFontExistsTF{XITSMath-Regular.otf}{
- \setmathfont[
- Extension = .otf,
- BoldFont = XITSMath-Bold,
- StylisticSet = 8,
- ]{XITSMath-Regular}
- \setmathfont[range={cal,bfcal},StylisticSet=1]{XITSMath-Regular.otf}
-}{
- \setmathfont[
- Extension = .otf,
- BoldFont = *bold,
- StylisticSet = 8,
- ]{xits-math}
- \setmathfont[range={cal,bfcal},StylisticSet=1]{xits-math.otf}
-}
-
-\colorlet{thu at macro}{blue!60!black}
-\colorlet{thu at env}{blue!70!black}
-\colorlet{thu at option}{purple}
-\patchcmd{\PrintMacroName}{\MacroFont}{\MacroFont\bfseries\color{thu at macro}}{}{}
-\patchcmd{\PrintDescribeMacro}{\MacroFont}{\MacroFont\bfseries\color{thu at macro}}{}{}
-\patchcmd{\PrintDescribeEnv}{\MacroFont}{\MacroFont\bfseries\color{thu at env}}{}{}
-\patchcmd{\PrintEnvName}{\MacroFont}{\MacroFont\bfseries\color{thu at env}}{}{}
-
-\def\DescribeOption{%
- \leavevmode\@bsphack\begingroup\MakePrivateLetters%
- \Describe at Option}
-\def\Describe at Option#1{\endgroup
- \marginpar{\raggedleft\PrintDescribeOption{#1}}%
- \thu at special@index{option}{#1}\@esphack\ignorespaces}
-\def\PrintDescribeOption#1{\strut \MacroFont\bfseries\sffamily\color{thu at option} #1\ }
-\def\thu at special@index#1#2{\@bsphack
- \begingroup
- \HD at target
- \let\HDorg at encapchar\encapchar
- \edef\encapchar usage{%
- \HDorg at encapchar hdclindex{\the\c at HD@hypercount}{usage}%
- }%
- \index{#2\actualchar{\string\ttfamily\space#2}
- (#1)\encapchar usage}%
- \index{#1:\levelchar#2\actualchar
- {\string\ttfamily\space#2}\encapchar usage}%
- \endgroup
- \@esphack}
-
-\lstdefinestyle{lstStyleBase}{%
- basicstyle=\small\ttfamily,
- aboveskip=\medskipamount,
- belowskip=\medskipamount,
- lineskip=0pt,
- boxpos=c,
- showlines=false,
- extendedchars=true,
- upquote=true,
- tabsize=2,
- showtabs=false,
- showspaces=false,
- showstringspaces=false,
- numbers=none,
- linewidth=\linewidth,
- xleftmargin=4pt,
- xrightmargin=0pt,
- resetmargins=false,
- breaklines=true,
- breakatwhitespace=false,
- breakindent=0pt,
- breakautoindent=true,
- columns=flexible,
- keepspaces=true,
- gobble=4,
- framesep=3pt,
- rulesep=1pt,
- framerule=1pt,
- backgroundcolor=\color{gray!5},
- stringstyle=\color{green!40!black!100},
- keywordstyle=\bfseries\color{blue!50!black},
- commentstyle=\slshape\color{black!60}}
-
-\lstdefinestyle{lstStyleShell}{%
- style=lstStyleBase,
- frame=l,
- rulecolor=\color{purple},
- language=bash}
-
-\lstdefinestyle{lstStyleLaTeX}{%
- style=lstStyleBase,
- frame=l,
- rulecolor=\color{violet},
- language=[LaTeX]TeX}
-
-\lstnewenvironment{latex}{\lstset{style=lstStyleLaTeX}}{}
-\lstnewenvironment{shell}{\lstset{style=lstStyleShell}}{}
-
-\setlist{nosep}
-
-\DeclareDocumentCommand{\option}{m}{\textsf{#1}}
-\DeclareDocumentCommand{\env}{m}{\texttt{#1}}
-\DeclareDocumentCommand{\pkg}{s m}{%
- \texttt{#2}\IfBooleanF#1{\thu at special@index{package}{#2}}}
-\DeclareDocumentCommand{\file}{s m}{%
- \texttt{#2}\IfBooleanF#1{\thu at special@index{file}{#2}}}
-\newcommand{\myentry}[1]{%
- \marginpar{\raggedleft\color{purple}\bfseries\strut #1}}
-\newcommand{\note}[2][Note]{{%
- \color{magenta}{\bfseries #1}\emph{#2}}}
-
-\DeclareDocumentCommand{\githubuser}{m}{\href{https://github.com/#1}{@#1}}
-
-\def\thuthesis{\textsc{Thu}\-\textsc{Thesis}}
-\endinput
-%%
-%% End of file `dtx-style.sty'.
Deleted: trunk/Master/texmf-dist/doc/latex/thuthesis/figures/scan-auth.pdf
===================================================================
(Binary files differ)
Added: trunk/Master/texmf-dist/doc/latex/thuthesis/figures/scan-copyright.pdf
===================================================================
(Binary files differ)
Index: trunk/Master/texmf-dist/doc/latex/thuthesis/figures/scan-copyright.pdf
===================================================================
--- trunk/Master/texmf-dist/doc/latex/thuthesis/figures/scan-copyright.pdf 2020-06-14 21:13:23 UTC (rev 55546)
+++ trunk/Master/texmf-dist/doc/latex/thuthesis/figures/scan-copyright.pdf 2020-06-14 22:17:29 UTC (rev 55547)
Property changes on: trunk/Master/texmf-dist/doc/latex/thuthesis/figures/scan-copyright.pdf
___________________________________________________________________
Added: svn:mime-type
## -0,0 +1 ##
+application/pdf
\ No newline at end of property
Modified: trunk/Master/texmf-dist/doc/latex/thuthesis/figures/scan-statement.pdf
===================================================================
(Binary files differ)
Modified: trunk/Master/texmf-dist/doc/latex/thuthesis/latexmkrc
===================================================================
--- trunk/Master/texmf-dist/doc/latex/thuthesis/latexmkrc 2020-06-14 21:13:23 UTC (rev 55546)
+++ trunk/Master/texmf-dist/doc/latex/thuthesis/latexmkrc 2020-06-14 22:17:29 UTC (rev 55547)
@@ -10,11 +10,6 @@
$clean_ext = "hd loe ptc synctex.gz thm xdv";
$makeindex = "makeindex -s gind.ist %O -o %D %S";
-add_cus_dep('glo', 'gls', 0, 'glo2gls');
-sub glo2gls {
- system("makeindex -s gglo.ist -o \"$_[0].gls\" \"$_[0].glo\"");
-}
-push @generated_exts, 'glo', 'gls';
add_cus_dep('nlo', 'nls', 0, 'nlo2nls');
sub nlo2nls {
Modified: trunk/Master/texmf-dist/doc/latex/thuthesis/spine.pdf
===================================================================
(Binary files differ)
Modified: trunk/Master/texmf-dist/doc/latex/thuthesis/thusetup.tex
===================================================================
--- trunk/Master/texmf-dist/doc/latex/thuthesis/thusetup.tex 2020-06-14 21:13:23 UTC (rev 55546)
+++ trunk/Master/texmf-dist/doc/latex/thuthesis/thusetup.tex 2020-06-14 22:17:29 UTC (rev 55547)
@@ -85,10 +85,16 @@
%
% date = {2019-07-07},
%
- % 是否在中文封面后的空白页生成书脊
+ % 是否在中文封面后的空白页生成书脊（默认 false）
%
include-spine = false,
%
+ % 生成的声明页是否要插入页码（默认 false）
+ % 仅在需要进行电子签名时，才需要打开这一选项
+ % 插入的扫描声明页总是会有页码，不受这一选项影响
+ %
+ statement-page-number = false,
+ %
% 密级和年限
% 秘密, 机密, 绝密
%
Modified: trunk/Master/texmf-dist/doc/latex/thuthesis/thuthesis-example.pdf
===================================================================
(Binary files differ)
Modified: trunk/Master/texmf-dist/doc/latex/thuthesis/thuthesis-example.tex
===================================================================
--- trunk/Master/texmf-dist/doc/latex/thuthesis/thuthesis-example.tex 2020-06-14 21:13:23 UTC (rev 55546)
+++ trunk/Master/texmf-dist/doc/latex/thuthesis/thuthesis-example.tex 2020-06-14 22:17:29 UTC (rev 55547)
@@ -20,8 +20,8 @@
% 使用授权的说明
\copyrightpage
-% 将签字扫描后授权文件 scan-auth.pdf 替换原始页面
-% \copyrightpage[scan-auth.pdf]
+% 将签字扫描后授权文件 scan-copyright.pdf 替换原始页面
+% \copyrightpage[scan-copyright.pdf]
\frontmatter
\input{data/abstract.tex}
@@ -57,8 +57,8 @@
% 声明
\statement
-% 将签字扫描后的声明n'g statement.pdf 替换原始页面
-% \copyrightpage[statement.pdf]
+% 将签字扫描后的声明文件 scan-statement.pdf 替换原始页面
+% \statement[scan-statement.pdf]
% 附录
\appendix
@@ -69,7 +69,7 @@
% 个人简历
\input{data/resume}
-% 本科生的综合论文训练记录表
-% \includepdf[pages=-]{scan-record.pdf}
+% 本科生的综合论文训练记录表（扫描版）
+% \record{scan-record.pdf}
\end{document}
Modified: trunk/Master/texmf-dist/doc/latex/thuthesis/thuthesis.pdf
===================================================================
(Binary files differ)
Deleted: trunk/Master/texmf-dist/doc/latex/thuthesis/tsinghua-name-bachelor.pdf
===================================================================
(Binary files differ)
Deleted: trunk/Master/texmf-dist/source/latex/thuthesis/Makefile
===================================================================
--- trunk/Master/texmf-dist/source/latex/thuthesis/Makefile 2020-06-14 21:13:23 UTC (rev 55546)
+++ trunk/Master/texmf-dist/source/latex/thuthesis/Makefile 2020-06-14 22:17:29 UTC (rev 55547)
@@ -1,85 +0,0 @@
-# Makefile for ThuThesis
-
-PACKAGE = thuthesis
-THESIS = thuthesis-example
-SPINE = spine
-
-SOURCES = $(PACKAGE).ins $(PACKAGE).dtx
-CLSFILE = dtx-style.sty $(PACKAGE).cls
-
-LATEXMK = latexmk
-SHELL := /bin/bash
-NPM ?= npm
-
-# make deletion work on Windows
-ifdef SystemRoot
- RM = del /Q
-else
- RM = rm -f
-endif
-
-.PHONY: all all-dev clean distclean dist thesis viewthesis spine viewspine doc viewdoc cls check save savepdf test FORCE_MAKE
-
-thesis: $(THESIS).pdf
-
-all: thesis spine
-
-all-dev: doc all
-
-cls: $(CLSFILE)
-
-$(CLSFILE): $(SOURCES)
- xetex $(PACKAGE).ins
-
-doc: $(PACKAGE).pdf
-
-spine: $(SPINE).pdf
-
-$(PACKAGE).pdf: cls FORCE_MAKE
- $(LATEXMK) $(PACKAGE).dtx
-
-$(THESIS).pdf: cls FORCE_MAKE
- $(LATEXMK) $(THESIS)
-
-$(SPINE).pdf: cls FORCE_MAKE
- $(LATEXMK) $(SPINE)
-
-viewdoc: doc
- $(LATEXMK) -pv $(PACKAGE).dtx
-
-viewthesis: thesis
- $(LATEXMK) -pv $(THESIS)
-
-viewspine: spine
- $(LATEXMK) -pv $(SPINE)
-
-save:
- bash testfiles/save.sh
-
-savepdf:
- bash testfiles/save-pdf.sh
-
-test:
- l3build check
-
-clean:
- $(LATEXMK) -c $(PACKAGE).dtx $(THESIS) $(SPINE)
- -@$(RM) -rf *~ main-survey.* main-translation.* _markdown_thuthesis* thuthesis.markdown.*
-
-cleanall: clean
- -@$(RM) $(PACKAGE).pdf $(THESIS).pdf $(SPINE).pdf
-
-distclean: cleanall
- -@$(RM) $(CLSFILE)
- -@$(RM) -r dist
-
-check: FORCE_MAKE
-ifeq ($(version),)
- @echo "Error: version missing: \"make [check|dist] version=X.Y.Z\""; exit 1
-else
- @[[ $(shell grep -E -c '$(version) Tsinghua University Thesis Template|\\def\\version\{$(version)\}' thuthesis.dtx) -eq 3 ]] || (echo "update version in thuthesis.dtx before release"; exit 1)
- @[[ $(shell grep -E -c '"version": "$(version)"' package.json) -eq 1 ]] || (echo "update version in package.json before release"; exit 1)
-endif
-
-dist: check all-dev
- $(NPM) run build -- --version=$(version)
Modified: trunk/Master/texmf-dist/source/latex/thuthesis/thuthesis.dtx
===================================================================
--- trunk/Master/texmf-dist/source/latex/thuthesis/thuthesis.dtx 2020-06-14 21:13:23 UTC (rev 55546)
+++ trunk/Master/texmf-dist/source/latex/thuthesis/thuthesis.dtx 2020-06-14 22:17:29 UTC (rev 55547)
@@ -17,7 +17,7 @@
%
% \iffalse
%<*driver>
-\ProvidesFile{thuthesis.dtx}[2020/06/12 6.1.1 Tsinghua University Thesis Template]
+\ProvidesFile{thuthesis.dtx}[2020/06/14 6.1.2 Tsinghua University Thesis Template]
\documentclass{ltxdoc}
\usepackage{dtx-style}
@@ -268,7 +268,6 @@
% \begin{shell}
% $ xelatex -shell-escape thuthesis.dtx
% $ makeindex -s gind.ist -o thuthesis.ind thuthesis.idx
-% $ makeindex -s gglo.ist -o thuthesis.gls thuthesis.glo
% $ xelatex -shell-escape thuthesis.dtx
% $ xelatex -shell-escape thuthesis.dtx # 生成说明文档 thuthesis.pdf
% \end{shell}
@@ -395,7 +394,8 @@
% 选择输出的格式是打印版还是电子版（用于提交），可选：\option{print}（默认）、\option{electronic}。
% 一些院系要求提交的电子版不含空白页，但是这对打印并不友好，
% 比如正文第一页可能会在左侧；以及一些部分需要单面打印，需要插入空白页。
-% 注意在不同选项下，生成的\textbf{声明页码很可能不同}，需要打印签字并扫描后插入的用户请特别关注这一情况。
+% 注意在不同选项下，生成的声明页码很可能不同。为了避免页码错误，
+% \thuthesis{}将会在插入扫描的 PDF 文件时自动生成页码，因此\textbf{扫描声明页时请移除底部的页码}，以防重叠。
%
% \begin{latex}
% \thusetup{
@@ -578,8 +578,8 @@
% 生成授权说明。用法：\cs{copyrightpage}\oarg{file}。
% 可选参数为扫描得到的 PDF 文件名，例如：
% \begin{latex}
-% % 将签字扫描后授权文件 scan-auth.pdf 替换原始页面
-% \copyrightpage[scan-auth.pdf]
+% % 将签字扫描后授权文件 scan-copyright.pdf 替换原始页面
+% \copyrightpage[scan-copyright.pdf]
% \end{latex}
%
% \subsubsection{摘要}
@@ -877,6 +877,18 @@
% \statement[scan-statement.pdf]
% \end{latex}
%
+% 由于打印版和电子版有空白页的差别，声明的页码可能不同。所以编译声明页时默认不加页码，
+% 在签字后插入扫描页时再补上页码，防止页码冲突。
+%
+% \DescribeOption{statement-page-number}
+% 如果需要编译时也加页码（如直接对电子版进行签名而不是插入扫描页），可以使用在 \cs{statement} 前设置
+% \begin{latex}
+% \thusetup{
+% statement-page-number = true,
+% }
+% \end{latex}
+% 注意，插入扫描页总是会加页码，不受该选项控制。
+%
% \subsubsection{附录}
%
% 附录由 \cs{appendix} 命令开启，然后像正文一样书写。
@@ -1001,6 +1013,15 @@
%
% 具体用法请参看示例文档 \file{data/resume.tex}。
%
+% \subsubsection{综合论文训练记录表}
+% \DescribeMacro{\record}
+% 本科生需要在最后附上综合论文训练记录表，可以用如下命令：
+%
+% \begin{latex}
+% \record{scan-record.pdf}
+% \end{latex}
+%
+%
% \subsection{书脊}
% \DescribeMacro{\spine}
% \DescribeOption{spine-font}
@@ -1061,7 +1082,7 @@
% \begin{macrocode}
%<cls>\NeedsTeXFormat{LaTeX2e}[2017/04/15]
%<cls>\ProvidesClass{thuthesis}
-%<cls>[2020/06/12 6.1.1 Tsinghua University Thesis Template]
+%<cls>[2020/06/14 6.1.2 Tsinghua University Thesis Template]
% \end{macrocode}
%
% 报错
@@ -1095,7 +1116,7 @@
%<*cls>
\hyphenation{Thu-Thesis}
\def\thuthesis{ThuThesis}
-\def\version{6.1.1}
+\def\version{6.1.2}
\RequirePackage{kvdefinekeys}
\RequirePackage{kvsetkeys}
\RequirePackage{kvoptions}
@@ -1570,7 +1591,7 @@
\ifodd\c at page
\else
\thispagestyle{empty}%
- \hbox{}
+ \hbox{}%
\newpage
\if at twocolumn
\hbox{}\newpage
@@ -1589,11 +1610,6 @@
% \begin{macrocode}
\renewcommand\frontmatter{%
\cleardoublepage
- \ifthu at degree@bachelor
- \pagestyle{thu at plain}
- \else
- \pagestyle{thu at headings}
- \fi
\@mainmatterfalse
\pagenumbering{Roman}%
\let\@tabular\thu at tabular
@@ -1601,10 +1617,14 @@
\renewcommand\mainmatter{%
\cleardoublepage
\@mainmattertrue
- \pagenumbering{arabic}
- \ifthu at degree@bachelor\pagestyle{thu at plain}\else\pagestyle{thu at headings}\fi}
+ \pagenumbering{arabic}%
+}
\renewcommand\backmatter{%
- \if at openright\cleardoublepage\else\clearpage\fi
+ \if at openright
+ \cleardoublepage
+ \else
+ \clearpage
+ \fi
\@mainmattertrue}
% \end{macrocode}
% \end{macro}
@@ -2281,40 +2301,59 @@
% \subsubsection{页眉页脚}
% \label{sec:headerfooter}
%
+% \pkg{fancyhdr} 定义页眉页脚很方便，但是有一个非常隐蔽的坑。
+% 第一次调用 \pkg{fancyhdr} 定义的样式时会修改 \cs{chaptermark}，
+% 这会导致页眉信息错误（多余章号并且英文大写）。
+% 这是因为在 \cs{ps at fancy} 中对 \cs{chaptermark} 进行重定义，
+% 所以我们先调用 \cs{ps at fancy}，再修改 \cs{chaptermark}。
+% \begin{macrocode}
+\pagestyle{fancy}
+% \end{macrocode}
+%
% 定义页眉和页脚。
-% \begin{macro}{\ps at thu@empty}
-% \begin{macro}{\ps at thu@plain}
-% \begin{macro}{\ps at thu@headings}
-% 定义三种页眉页脚格式：
-% \begin{itemize}
-% \item \texttt{thu at empty}：页眉页脚都没有
-% \item \texttt{thu at plain}：只显示页脚的页码。\cs{chapter} 自动调用
-% \cs{thispagestyle\{thu at plain\}}。
-% \item \texttt{thu at headings}：页眉页脚同时显示
-% \end{itemize}
+% 研究生要求：
+% 页眉宋体五号字，宋体五号字居中书写；
+% 页码五号 Times New Roman 体。
+%
+% 本科生要求：
+% 页眉：无；
+% 页码：位于页面底端，居中书写。
+%
+% 本科外文专业要求页码字号 12pt。
% \begin{macrocode}
-\fancypagestyle{thu at empty}{%
- \fancyhf{}
- \renewcommand{\headrulewidth}{0pt}
- \renewcommand{\footrulewidth}{0pt}}
-\fancypagestyle{thu at plain}{%
- \fancyhead{}
- \fancyfoot[C]{\xiaowu\thepage}
- \renewcommand{\headrulewidth}{0pt}
- \renewcommand{\footrulewidth}{0pt}}
-\fancypagestyle{thu at headings}{%
- \fancyhead{}
- \fancyhead[C]{\wuhao\normalfont\leftmark}
- \fancyfoot{}
- \fancyfoot[C]{\wuhao\thepage}
- \renewcommand{\headrulewidth}{0.4pt}
- \renewcommand{\footrulewidth}{0pt}}
+\fancypagestyle{plain}{%
+ \fancyhf{}%
+ \renewcommand\footrulewidth{0pt}%
+ \ifthu at degree@bachelor
+ \renewcommand\headrulewidth{0pt}%
+ \fancyfoot[C]{\xiaowu\thepage}%
+ \let\@mkboth\@gobbletwo
+ \else
+ \renewcommand\headrulewidth{0.75bp}%
+ \fancyhead[C]{\wuhao\leftmark}%
+ \fancyfoot[C]{\wuhao\thepage}%
+ \let\@mkboth\markboth
+ \fi
+ \def\chaptermark##1{%
+ \markboth{\CTEXifname{\CTEXthechapter\hskip\ccwd}{}##1}{}%
+ }%
+}
+\pagestyle{plain}
% \end{macrocode}
-% \end{macro}
-% \end{macro}
-% \end{macro}
%
+% 用于声明页，不含页脚。
+% \begin{macrocode}
+\fancypagestyle{nofooter}{%
+ \fancyfoot{}%
+}
+% \end{macrocode}
%
+% \cs{chapter} 会调用特殊的 page style。
+% \begin{macrocode}
+\ctexset{chapter/pagestyle = plain}
+% \end{macrocode}
+%
+%
% \subsubsection{段落}
% \label{sec:paragraph}
%
@@ -2611,35 +2650,6 @@
\fi
% \end{macrocode}
%
-% \pkg{fancyhdr} 定义页眉页脚很方便，但是有一个非常隐蔽的坑。通过 \pkg{fancyhdr}
-% 定义的样式在第一次被调用时会修改 \cs{chaptermark}，这会导致页眉信息错误（多余
-% 章号并且英文大写）。这是因为在原始的 \file{book.cls} 中定义如下（大意）：
-% \begin{latex}
-% \newcommand\chaptername{Chapter}
-% \newcommand\@chapapp{\chaptername}
-% \def\chaptermark#1{
-% \markboth{\MakeUppercase{\@chapapp\ \thechapter}}{}}
-% \end{latex}
-% 很显然这个 \cs{\@chapapp} 不适合中文，因此我们使用\cs{CTEXthechapter}（
-% 如，“第 x 章”），同时会将 \cs{MakeUppercase} 去掉。也就是说我们会做如下动作：
-% \begin{latex}
-% \renewcommand{\chaptermark}[1]{\@mkboth{\CTEXthechapter\hskip\ccwd#1}{}}
-% \end{latex}
-% 但，\pkg{fancyhdr} 不知何故在 \cs{ps at fancy} 中对 \cs{chaptermark} 进行重定义
-% （其实一模一样），而这个 \cs{ps at fancy} 会在 \cs{fancypagestyle} 中使用，如下：
-% \begin{latex}
-% \newcommand{\fancypagestyle}[2]{%
-% \@namedef{ps@#1}{\let\fancy at gbl\relax#2\relax\ps at fancy}}
-% \end{latex}
-% 这样的话，\cs{ps at fancy} 会在 \pkg{fancyhdr} 定义的任何样式首次样被激活时调用，从
-% 而覆盖我们的 \cs{chaptermark} 定义（后续样式再激活不会重复覆盖）。所以我们采用如下
-% 方法解决：
-% \begin{macrocode}
-\AtBeginDocument{%
- \pagestyle{thu at empty}
- \renewcommand{\chaptermark}[1]{\@mkboth{\CTEXthechapter\hskip\ccwd#1}{}}}
-% \end{macrocode}
-%
% 各级标题格式设置。
% \begin{description}
% \item[chapter] 章序号与章名之间空一个汉字符 黑体三号字，居中书写，单倍行距，段
@@ -2669,7 +2679,6 @@
\ctexset{%
chapter={
afterindent=true,
- pagestyle={\ifthu at degree@bachelor thu at plain\else thu at headings\fi},
beforeskip={\ifthu at degree@bachelor 15bp\else 9bp\fi},
aftername=\hskip\ccwd,
afterskip={\ifthu at degree@bachelor 20bp\else 24bp\fi},
@@ -3068,7 +3077,6 @@
% \begin{macrocode}
\renewcommand\maketitle{%
\cleardoublepage
- \pagestyle{thu at empty}%
\pagenumbering{Alph}%
\thu at pdfbookmark{-1}{\thu at title}%
\thu at titlepage
@@ -3128,6 +3136,7 @@
bottom = 6cm,
hmargin = 3.5cm,
}%
+ \thispagestyle{empty}%
\null\vskip 0.2cm%
\begingroup
\centering
@@ -3156,6 +3165,7 @@
bottom = 6cm,
hmargin = 3.5cm,
}%
+ \thispagestyle{empty}%
\null\vskip 0.45cm%
\begingroup
\centering
@@ -3315,6 +3325,7 @@
bottom = 5cm,
hmargin = 3.6cm,
}%
+ \thispagestyle{empty}%
\ifthu at degree@type at academic
\thu at titlepage@en at graduate@academic
\else
@@ -3435,6 +3446,7 @@
vmargin = 2.54cm,
hmargin = 3.17cm,
}%
+ \thispagestyle{empty}%
\null\vskip 0.44cm%
\begingroup
\centering
@@ -3500,6 +3512,7 @@
% \myentry{博士后封面}
% \begin{macrocode}
\newcommand\thu at cover@postdoc{%
+ \thispagestyle{empty}%
\begin{center}%
\renewcommand\ULthickness{0.7pt}%
\vspace*{0.35cm}%
@@ -3542,6 +3555,7 @@
% \myentry{博士后题名页}
% \begin{macrocode}
\newcommand\thu at titlepage@postdoc{%
+ \thispagestyle{empty}%
\begin{center}%
\vspace*{1.5cm}%
\parbox[t][3cm][c]{\textwidth}{%
@@ -3604,6 +3618,7 @@
\newcommand\copyrightpage[1][]{%
\ifthu at degree@postdoc\relax\else
\cleardoublepage
+ \thispagestyle{empty}%
\thu at pdfbookmark{0}{\thu at authorization@title}%
\def\thu@@tmp{#1}
\ifx\thu@@tmp\@empty
@@ -3618,6 +3633,7 @@
\end{list}%
\fi%
\else
+ \thu at phantomsection
\includepdf{#1}%
\fi
\fi
@@ -3777,7 +3793,7 @@
% \label{sec:ackanddeclare}
%
% \begin{environment}{acknowledgements}
-% 支持扫描文件替换。
+% 定义致谢环境
% \begin{macrocode}
\newcommand\thu at statement@name{声\hspace{\ccwd}明}
\newcommand{\thu at statement@text}{本人郑重声明：所呈交的学位论文，是本人在导师指导下
@@ -3802,8 +3818,20 @@
}
% \end{macrocode}
%
-% 声明部分
+% \end{environment}
+% \begin{environment}{statement}
+% 声明部分（支持扫描文件替换）
% \begin{macrocode}
+\thu at define@key{
+ statement-page-number = {
+ name = statement at page@number,
+ choices = {
+ false,
+ true,
+ },
+ default = false,
+ },
+}
\newcommand\statement[1][]{%
\ifthu at degree@bachelor
\cleardoublepage
@@ -3811,6 +3839,9 @@
\def\thu@@tmp{#1}%
\ifx\thu@@tmp\@empty
\thu at chapter*{\thu at statement@name}%
+ \ifthu at statement@page at number@false
+ \thispagestyle{nofooter}%
+ \fi
\thu at statement@text\par
\ifthu at degree@graduate
\vskip 2cm%
@@ -3820,7 +3851,8 @@
{\hfill\thu at signature\thu at underline[2.5cm]\relax
\thu at backdate\thu at underline[2.5cm]\relax}%
\else
- \includepdf[pagecommand={\thispagestyle{thu at empty}%
+ \includepdf[pagecommand={%
+ \thu at phantomsection
\addcontentsline{toc}{chapter}{\thu at statement@name}%
}]{#1}%
\fi
@@ -4053,7 +4085,7 @@
\g at addto@macro\appendix{%
\thusetup{
toc-depth = 0,
- }
+ }%
}
% \end{macrocode}
%
@@ -4234,6 +4266,21 @@
% \end{macrocode}
% \end{macro}
%
+% \subsection{综合论文训练记录表}
+%
+% \begin{macro}{\record}
+% （本科生专用）插入综合论文训练记录表的 PDF 版本，并加入书签。
+%
+% \begin{macrocode}
+\newcommand{\record}[1]{%
+ \clearpage
+ \thu at pdfbookmark{0}{综合论文训练记录表}%
+ \includepdf[pages=-]{#1}%
+}
+% \end{macrocode}
+%
+% \end{macro}
+%
% \subsection{其他宏包的设置}
%
% 这些宏包并非格式要求，但是为了方便同学们使用，在这里进行简单设置。
Modified: trunk/Master/texmf-dist/tex/latex/thuthesis/thuthesis.cls
===================================================================
--- trunk/Master/texmf-dist/tex/latex/thuthesis/thuthesis.cls 2020-06-14 21:13:23 UTC (rev 55546)
+++ trunk/Master/texmf-dist/tex/latex/thuthesis/thuthesis.cls 2020-06-14 22:17:29 UTC (rev 55547)
@@ -23,7 +23,7 @@
%%
\NeedsTeXFormat{LaTeX2e}[2017/04/15]
\ProvidesClass{thuthesis}
-[2020/06/12 6.1.1 Tsinghua University Thesis Template]
+[2020/06/14 6.1.2 Tsinghua University Thesis Template]
\newcommand\thu at error[1]{%
\ClassError{thuthesis}{#1}{}%
}
@@ -38,7 +38,7 @@
\fi
\hyphenation{Thu-Thesis}
\def\thuthesis{ThuThesis}
-\def\version{6.1.1}
+\def\version{6.1.2}
\RequirePackage{kvdefinekeys}
\RequirePackage{kvsetkeys}
\RequirePackage{kvoptions}
@@ -298,7 +298,7 @@
\ifodd\c at page
\else
\thispagestyle{empty}%
- \hbox{}
+ \hbox{}%
\newpage
\if at twocolumn
\hbox{}\newpage
@@ -309,11 +309,6 @@
}
\renewcommand\frontmatter{%
\cleardoublepage
- \ifthu at degree@bachelor
- \pagestyle{thu at plain}
- \else
- \pagestyle{thu at headings}
- \fi
\@mainmatterfalse
\pagenumbering{Roman}%
\let\@tabular\thu at tabular
@@ -321,10 +316,14 @@
\renewcommand\mainmatter{%
\cleardoublepage
\@mainmattertrue
- \pagenumbering{arabic}
- \ifthu at degree@bachelor\pagestyle{thu at plain}\else\pagestyle{thu at headings}\fi}
+ \pagenumbering{arabic}%
+}
\renewcommand\backmatter{%
- \if at openright\cleardoublepage\else\clearpage\fi
+ \if at openright
+ \cleardoublepage
+ \else
+ \clearpage
+ \fi
\@mainmattertrue}
\ifthu at fontset@mac
\thusetup{
@@ -841,22 +840,29 @@
}
\thu at set@punctuations
\thu at option@hook{language}{\thu at set@punctuations}
-\fancypagestyle{thu at empty}{%
- \fancyhf{}
- \renewcommand{\headrulewidth}{0pt}
- \renewcommand{\footrulewidth}{0pt}}
-\fancypagestyle{thu at plain}{%
- \fancyhead{}
- \fancyfoot[C]{\xiaowu\thepage}
- \renewcommand{\headrulewidth}{0pt}
- \renewcommand{\footrulewidth}{0pt}}
-\fancypagestyle{thu at headings}{%
- \fancyhead{}
- \fancyhead[C]{\wuhao\normalfont\leftmark}
- \fancyfoot{}
- \fancyfoot[C]{\wuhao\thepage}
- \renewcommand{\headrulewidth}{0.4pt}
- \renewcommand{\footrulewidth}{0pt}}
+\pagestyle{fancy}
+\fancypagestyle{plain}{%
+ \fancyhf{}%
+ \renewcommand\footrulewidth{0pt}%
+ \ifthu at degree@bachelor
+ \renewcommand\headrulewidth{0pt}%
+ \fancyfoot[C]{\xiaowu\thepage}%
+ \let\@mkboth\@gobbletwo
+ \else
+ \renewcommand\headrulewidth{0.75bp}%
+ \fancyhead[C]{\wuhao\leftmark}%
+ \fancyfoot[C]{\wuhao\thepage}%
+ \let\@mkboth\markboth
+ \fi
+ \def\chaptermark##1{%
+ \markboth{\CTEXifname{\CTEXthechapter\hskip\ccwd}{}##1}{}%
+ }%
+}
+\pagestyle{plain}
+\fancypagestyle{nofooter}{%
+ \fancyfoot{}%
+}
+\ctexset{chapter/pagestyle = plain}
\ctexset{%
punct=quanjiao,
space=auto,
@@ -986,9 +992,6 @@
\newcommand{\thu at abstract@name}{摘\hspace{\ccwd}要}
\newcommand{\thu at abstract@name at en}{Abstract}
\fi
-\AtBeginDocument{%
- \pagestyle{thu at empty}
- \renewcommand{\chaptermark}[1]{\@mkboth{\CTEXthechapter\hskip\ccwd#1}{}}}
\newcommand\thu at chapter@titleformat[1]{%
\ifthu at degree@bachelor #1\else%
\ifthenelse%
@@ -999,7 +1002,6 @@
\ctexset{%
chapter={
afterindent=true,
- pagestyle={\ifthu at degree@bachelor thu at plain\else thu at headings\fi},
beforeskip={\ifthu at degree@bachelor 15bp\else 9bp\fi},
aftername=\hskip\ccwd,
afterskip={\ifthu at degree@bachelor 20bp\else 24bp\fi},
@@ -1274,7 +1276,6 @@
}
\renewcommand\maketitle{%
\cleardoublepage
- \pagestyle{thu at empty}%
\pagenumbering{Alph}%
\thu at pdfbookmark{-1}{\thu at title}%
\thu at titlepage
@@ -1316,6 +1317,7 @@
bottom = 6cm,
hmargin = 3.5cm,
}%
+ \thispagestyle{empty}%
\null\vskip 0.2cm%
\begingroup
\centering
@@ -1340,6 +1342,7 @@
bottom = 6cm,
hmargin = 3.5cm,
}%
+ \thispagestyle{empty}%
\null\vskip 0.45cm%
\begingroup
\centering
@@ -1468,6 +1471,7 @@
bottom = 5cm,
hmargin = 3.6cm,
}%
+ \thispagestyle{empty}%
\ifthu at degree@type at academic
\thu at titlepage@en at graduate@academic
\else
@@ -1574,6 +1578,7 @@
vmargin = 2.54cm,
hmargin = 3.17cm,
}%
+ \thispagestyle{empty}%
\null\vskip 0.44cm%
\begingroup
\centering
@@ -1635,6 +1640,7 @@
\restoregeometry
}
\newcommand\thu at cover@postdoc{%
+ \thispagestyle{empty}%
\begin{center}%
\renewcommand\ULthickness{0.7pt}%
\vspace*{0.35cm}%
@@ -1673,6 +1679,7 @@
\end{center}%
}
\newcommand\thu at titlepage@postdoc{%
+ \thispagestyle{empty}%
\begin{center}%
\vspace*{1.5cm}%
\parbox[t][3cm][c]{\textwidth}{%
@@ -1729,6 +1736,7 @@
\newcommand\copyrightpage[1][]{%
\ifthu at degree@postdoc\relax\else
\cleardoublepage
+ \thispagestyle{empty}%
\thu at pdfbookmark{0}{\thu at authorization@title}%
\def\thu@@tmp{#1}
\ifx\thu@@tmp\@empty
@@ -1743,6 +1751,7 @@
\end{list}%
\fi%
\else
+ \thu at phantomsection
\includepdf{#1}%
\fi
\fi
@@ -1862,6 +1871,16 @@
\cleardoublepage
\fi
}
+\thu at define@key{
+ statement-page-number = {
+ name = statement at page@number,
+ choices = {
+ false,
+ true,
+ },
+ default = false,
+ },
+}
\newcommand\statement[1][]{%
\ifthu at degree@bachelor
\cleardoublepage
@@ -1869,6 +1888,9 @@
\def\thu@@tmp{#1}%
\ifx\thu@@tmp\@empty
\thu at chapter*{\thu at statement@name}%
+ \ifthu at statement@page at number@false
+ \thispagestyle{nofooter}%
+ \fi
\thu at statement@text\par
\ifthu at degree@graduate
\vskip 2cm%
@@ -1878,7 +1900,8 @@
{\hfill\thu at signature\thu at underline[2.5cm]\relax
\thu at backdate\thu at underline[2.5cm]\relax}%
\else
- \includepdf[pagecommand={\thispagestyle{thu at empty}%
+ \includepdf[pagecommand={%
+ \thu at phantomsection
\addcontentsline{toc}{chapter}{\thu at statement@name}%
}]{#1}%
\fi
@@ -1999,7 +2022,7 @@
\g at addto@macro\appendix{%
\thusetup{
toc-depth = 0,
- }
+ }%
}
\newenvironment{survey}{%
\chapter{外文资料的调研阅读报告}%
@@ -2105,6 +2128,11 @@
\setlist[achievements]{label=[\arabic*],align=left,nosep,itemsep=8bp,
leftmargin=10mm,labelsep=!,before=\xiaosi[1.26]}
\def\publicationskip{\bigskip\bigskip}
+\newcommand{\record}[1]{%
+ \clearpage
+ \thu at pdfbookmark{0}{综合论文训练记录表}%
+ \includepdf[pages=-]{#1}%
+}
\AtEndOfPackageFile*{hyperref}{
\hypersetup{
linktoc = all,
Added: trunk/Master/texmf-dist/tex/latex/thuthesis/tsinghua-name-bachelor.pdf
===================================================================
(Binary files differ)
Index: trunk/Master/texmf-dist/tex/latex/thuthesis/tsinghua-name-bachelor.pdf
===================================================================
--- trunk/Master/texmf-dist/tex/latex/thuthesis/tsinghua-name-bachelor.pdf 2020-06-14 21:13:23 UTC (rev 55546)
+++ trunk/Master/texmf-dist/tex/latex/thuthesis/tsinghua-name-bachelor.pdf 2020-06-14 22:17:29 UTC (rev 55547)
Property changes on: trunk/Master/texmf-dist/tex/latex/thuthesis/tsinghua-name-bachelor.pdf
___________________________________________________________________
Added: svn:mime-type
## -0,0 +1 ##
+application/pdf
\ No newline at end of property
More information about the tex-live-commits
mailing list.