texlive[55972] trunk: tl-update-auto
commits+karl at tug.org
commits+karl at tug.org
Tue Jul 28 01:53:24 CEST 2020
Revision: 55972
http://tug.org/svn/texlive?view=revision&revision=55972
Author: karl
Date: 2020-07-28 01:53:24 +0200 (Tue, 28 Jul 2020)
Log Message:
-----------
tl-update-auto
Modified Paths:
--------------
trunk/Build/source/build-aux/install-sh
trunk/Build/source/libs/freetype2/freetype-src/builds/unix/install-sh
trunk/Build/source/libs/icu/icu-src/source/install-sh
trunk/Build/source/utils/asymptote/doc/FAQ/install-sh
trunk/Build/source/utils/asymptote/doc/install-sh
trunk/Build/source/utils/asymptote/install-sh
trunk/Build/source/utils/autosp/autosp-src/install-sh
trunk/Master/doc.html
Modified: trunk/Build/source/build-aux/install-sh
===================================================================
--- trunk/Build/source/build-aux/install-sh 2020-07-27 23:47:27 UTC (rev 55971)
+++ trunk/Build/source/build-aux/install-sh 2020-07-27 23:53:24 UTC (rev 55972)
@@ -1,7 +1,7 @@
#!/bin/sh
# install - install a program, script, or datafile
-scriptversion=2018-03-11.20; # UTC
+scriptversion=2020-07-26.22; # UTC
# This originates from X11R5 (mit/util/scripts/install.sh), which was
# later released in X11R6 (xc/config/util/install.sh) with the
@@ -69,6 +69,10 @@
# Desired mode of installed file.
mode=0755
+# Create dirs (including intermediate dirs) using mode 755.
+# This is like GNU 'install' as of coreutils 8.32 (2020).
+mkdir_umask=22
+
chgrpcmd=
chmodcmd=$chmodprog
chowncmd=
@@ -301,22 +305,6 @@
if test $dstdir_status != 0; then
case $posix_mkdir in
'')
- # Create intermediate dirs using mode 755 as modified by the umask.
- # This is like FreeBSD 'install' as of 1997-10-28.
- umask=`umask`
- case $stripcmd.$umask in
- # Optimize common cases.
- *[2367][2367]) mkdir_umask=$umask;;
- .*0[02][02] | .[02][02] | .[02]) mkdir_umask=22;;
-
- *[0-7])
- mkdir_umask=`expr $umask + 22 \
- - $umask % 100 % 40 + $umask % 20 \
- - $umask % 10 % 4 + $umask % 2
- `;;
- *) mkdir_umask=$umask,go-w;;
- esac
-
# With -d, create the new directory with the user-specified mode.
# Otherwise, rely on $mkdir_umask.
if test -n "$dir_arg"; then
@@ -326,52 +314,49 @@
fi
posix_mkdir=false
- case $umask in
- *[123567][0-7][0-7])
- # POSIX mkdir -p sets u+wx bits regardless of umask, which
- # is incompatible with FreeBSD 'install' when (umask & 300) != 0.
- ;;
- *)
- # Note that $RANDOM variable is not portable (e.g. dash); Use it
- # here however when possible just to lower collision chance.
- tmpdir=${TMPDIR-/tmp}/ins$RANDOM-$$
+ # The $RANDOM variable is not portable (e.g., dash). Use it
+ # here however when possible just to lower collision chance.
+ tmpdir=${TMPDIR-/tmp}/ins$RANDOM-$$
- trap 'ret=$?; rmdir "$tmpdir/a/b" "$tmpdir/a" "$tmpdir" 2>/dev/null; exit $ret' 0
+ trap '
+ ret=$?
+ rmdir "$tmpdir/a/b" "$tmpdir/a" "$tmpdir" 2>/dev/null
+ exit $ret
+ ' 0
- # Because "mkdir -p" follows existing symlinks and we likely work
- # directly in world-writeable /tmp, make sure that the '$tmpdir'
- # directory is successfully created first before we actually test
- # 'mkdir -p' feature.
- if (umask $mkdir_umask &&
- $mkdirprog $mkdir_mode "$tmpdir" &&
- exec $mkdirprog $mkdir_mode -p -- "$tmpdir/a/b") >/dev/null 2>&1
- then
- if test -z "$dir_arg" || {
- # Check for POSIX incompatibilities with -m.
- # HP-UX 11.23 and IRIX 6.5 mkdir -m -p sets group- or
- # other-writable bit of parent directory when it shouldn't.
- # FreeBSD 6.1 mkdir -m -p sets mode of existing directory.
- test_tmpdir="$tmpdir/a"
- ls_ld_tmpdir=`ls -ld "$test_tmpdir"`
- case $ls_ld_tmpdir in
- d????-?r-*) different_mode=700;;
- d????-?--*) different_mode=755;;
- *) false;;
- esac &&
- $mkdirprog -m$different_mode -p -- "$test_tmpdir" && {
- ls_ld_tmpdir_1=`ls -ld "$test_tmpdir"`
- test "$ls_ld_tmpdir" = "$ls_ld_tmpdir_1"
- }
- }
- then posix_mkdir=:
- fi
- rmdir "$tmpdir/a/b" "$tmpdir/a" "$tmpdir"
- else
- # Remove any dirs left behind by ancient mkdir implementations.
- rmdir ./$mkdir_mode ./-p ./-- "$tmpdir" 2>/dev/null
- fi
- trap '' 0;;
- esac;;
+ # Because "mkdir -p" follows existing symlinks and we likely work
+ # directly in world-writeable /tmp, make sure that the '$tmpdir'
+ # directory is successfully created first before we actually test
+ # 'mkdir -p'.
+ if (umask $mkdir_umask &&
+ $mkdirprog $mkdir_mode "$tmpdir" &&
+ exec $mkdirprog $mkdir_mode -p -- "$tmpdir/a/b") >/dev/null 2>&1
+ then
+ if test -z "$dir_arg" || {
+ # Check for POSIX incompatibilities with -m.
+ # HP-UX 11.23 and IRIX 6.5 mkdir -m -p sets group- or
+ # other-writable bit of parent directory when it shouldn't.
+ # FreeBSD 6.1 mkdir -m -p sets mode of existing directory.
+ test_tmpdir="$tmpdir/a"
+ ls_ld_tmpdir=`ls -ld "$test_tmpdir"`
+ case $ls_ld_tmpdir in
+ d????-?r-*) different_mode=700;;
+ d????-?--*) different_mode=755;;
+ *) false;;
+ esac &&
+ $mkdirprog -m$different_mode -p -- "$test_tmpdir" && {
+ ls_ld_tmpdir_1=`ls -ld "$test_tmpdir"`
+ test "$ls_ld_tmpdir" = "$ls_ld_tmpdir_1"
+ }
+ }
+ then posix_mkdir=:
+ fi
+ rmdir "$tmpdir/a/b" "$tmpdir/a" "$tmpdir"
+ else
+ # Remove any dirs left behind by ancient mkdir implementations.
+ rmdir ./$mkdir_mode ./-p ./-- "$tmpdir" 2>/dev/null
+ fi
+ trap '' 0;;
esac
if
@@ -382,7 +367,7 @@
then :
else
- # The umask is ridiculous, or mkdir does not conform to POSIX,
+ # mkdir does not conform to POSIX,
# or it failed possibly due to a race condition. Create the
# directory the slow way, step by step, checking for races as we go.
@@ -411,7 +396,7 @@
prefixes=
else
if $posix_mkdir; then
- (umask=$mkdir_umask &&
+ (umask $mkdir_umask &&
$doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir") && break
# Don't fail if two instances are running concurrently.
test -d "$prefix" || exit 1
Modified: trunk/Build/source/libs/freetype2/freetype-src/builds/unix/install-sh
===================================================================
--- trunk/Build/source/libs/freetype2/freetype-src/builds/unix/install-sh 2020-07-27 23:47:27 UTC (rev 55971)
+++ trunk/Build/source/libs/freetype2/freetype-src/builds/unix/install-sh 2020-07-27 23:53:24 UTC (rev 55972)
@@ -1,7 +1,7 @@
#!/bin/sh
# install - install a program, script, or datafile
-scriptversion=2013-12-25.23; # UTC
+scriptversion=2020-07-26.22; # UTC
# This originates from X11R5 (mit/util/scripts/install.sh), which was
# later released in X11R6 (xc/config/util/install.sh) with the
@@ -69,6 +69,10 @@
# Desired mode of installed file.
mode=0755
+# Create dirs (including intermediate dirs) using mode 755.
+# This is like GNU 'install' as of coreutils 8.32 (2020).
+mkdir_umask=22
+
chgrpcmd=
chmodcmd=$chmodprog
chowncmd=
@@ -271,8 +275,7 @@
fi
dst=$dst_arg
- # If destination is a directory, append the input filename; won't work
- # if double slashes aren't ignored.
+ # If destination is a directory, append the input filename.
if test -d "$dst"; then
if test "$is_target_a_directory" = never; then
echo "$0: $dst_arg: Is a directory" >&2
@@ -279,7 +282,11 @@
exit 1
fi
dstdir=$dst
- dst=$dstdir/`basename "$src"`
+ dstbase=`basename "$src"`
+ case $dst in
+ */) dst=$dst$dstbase;;
+ *) dst=$dst/$dstbase;;
+ esac
dstdir_status=0
else
dstdir=`dirname "$dst"`
@@ -288,27 +295,16 @@
fi
fi
+ case $dstdir in
+ */) dstdirslash=$dstdir;;
+ *) dstdirslash=$dstdir/;;
+ esac
+
obsolete_mkdir_used=false
if test $dstdir_status != 0; then
case $posix_mkdir in
'')
- # Create intermediate dirs using mode 755 as modified by the umask.
- # This is like FreeBSD 'install' as of 1997-10-28.
- umask=`umask`
- case $stripcmd.$umask in
- # Optimize common cases.
- *[2367][2367]) mkdir_umask=$umask;;
- .*0[02][02] | .[02][02] | .[02]) mkdir_umask=22;;
-
- *[0-7])
- mkdir_umask=`expr $umask + 22 \
- - $umask % 100 % 40 + $umask % 20 \
- - $umask % 10 % 4 + $umask % 2
- `;;
- *) mkdir_umask=$umask,go-w;;
- esac
-
# With -d, create the new directory with the user-specified mode.
# Otherwise, rely on $mkdir_umask.
if test -n "$dir_arg"; then
@@ -318,43 +314,49 @@
fi
posix_mkdir=false
- case $umask in
- *[123567][0-7][0-7])
- # POSIX mkdir -p sets u+wx bits regardless of umask, which
- # is incompatible with FreeBSD 'install' when (umask & 300) != 0.
- ;;
- *)
- tmpdir=${TMPDIR-/tmp}/ins$RANDOM-$$
- trap 'ret=$?; rmdir "$tmpdir/d" "$tmpdir" 2>/dev/null; exit $ret' 0
+ # The $RANDOM variable is not portable (e.g., dash). Use it
+ # here however when possible just to lower collision chance.
+ tmpdir=${TMPDIR-/tmp}/ins$RANDOM-$$
- if (umask $mkdir_umask &&
- exec $mkdirprog $mkdir_mode -p -- "$tmpdir/d") >/dev/null 2>&1
- then
- if test -z "$dir_arg" || {
- # Check for POSIX incompatibilities with -m.
- # HP-UX 11.23 and IRIX 6.5 mkdir -m -p sets group- or
- # other-writable bit of parent directory when it shouldn't.
- # FreeBSD 6.1 mkdir -m -p sets mode of existing directory.
- ls_ld_tmpdir=`ls -ld "$tmpdir"`
- case $ls_ld_tmpdir in
- d????-?r-*) different_mode=700;;
- d????-?--*) different_mode=755;;
- *) false;;
- esac &&
- $mkdirprog -m$different_mode -p -- "$tmpdir" && {
- ls_ld_tmpdir_1=`ls -ld "$tmpdir"`
- test "$ls_ld_tmpdir" = "$ls_ld_tmpdir_1"
- }
- }
- then posix_mkdir=:
- fi
- rmdir "$tmpdir/d" "$tmpdir"
- else
- # Remove any dirs left behind by ancient mkdir implementations.
- rmdir ./$mkdir_mode ./-p ./-- 2>/dev/null
- fi
- trap '' 0;;
- esac;;
+ trap '
+ ret=$?
+ rmdir "$tmpdir/a/b" "$tmpdir/a" "$tmpdir" 2>/dev/null
+ exit $ret
+ ' 0
+
+ # Because "mkdir -p" follows existing symlinks and we likely work
+ # directly in world-writeable /tmp, make sure that the '$tmpdir'
+ # directory is successfully created first before we actually test
+ # 'mkdir -p'.
+ if (umask $mkdir_umask &&
+ $mkdirprog $mkdir_mode "$tmpdir" &&
+ exec $mkdirprog $mkdir_mode -p -- "$tmpdir/a/b") >/dev/null 2>&1
+ then
+ if test -z "$dir_arg" || {
+ # Check for POSIX incompatibilities with -m.
+ # HP-UX 11.23 and IRIX 6.5 mkdir -m -p sets group- or
+ # other-writable bit of parent directory when it shouldn't.
+ # FreeBSD 6.1 mkdir -m -p sets mode of existing directory.
+ test_tmpdir="$tmpdir/a"
+ ls_ld_tmpdir=`ls -ld "$test_tmpdir"`
+ case $ls_ld_tmpdir in
+ d????-?r-*) different_mode=700;;
+ d????-?--*) different_mode=755;;
+ *) false;;
+ esac &&
+ $mkdirprog -m$different_mode -p -- "$test_tmpdir" && {
+ ls_ld_tmpdir_1=`ls -ld "$test_tmpdir"`
+ test "$ls_ld_tmpdir" = "$ls_ld_tmpdir_1"
+ }
+ }
+ then posix_mkdir=:
+ fi
+ rmdir "$tmpdir/a/b" "$tmpdir/a" "$tmpdir"
+ else
+ # Remove any dirs left behind by ancient mkdir implementations.
+ rmdir ./$mkdir_mode ./-p ./-- "$tmpdir" 2>/dev/null
+ fi
+ trap '' 0;;
esac
if
@@ -365,7 +367,7 @@
then :
else
- # The umask is ridiculous, or mkdir does not conform to POSIX,
+ # mkdir does not conform to POSIX,
# or it failed possibly due to a race condition. Create the
# directory the slow way, step by step, checking for races as we go.
@@ -394,7 +396,7 @@
prefixes=
else
if $posix_mkdir; then
- (umask=$mkdir_umask &&
+ (umask $mkdir_umask &&
$doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir") && break
# Don't fail if two instances are running concurrently.
test -d "$prefix" || exit 1
@@ -427,14 +429,25 @@
else
# Make a couple of temp file names in the proper directory.
- dsttmp=$dstdir/_inst.$$_
- rmtmp=$dstdir/_rm.$$_
+ dsttmp=${dstdirslash}_inst.$$_
+ rmtmp=${dstdirslash}_rm.$$_
# Trap to clean up those temp files at exit.
trap 'ret=$?; rm -f "$dsttmp" "$rmtmp" && exit $ret' 0
# Copy the file name to the temp name.
- (umask $cp_umask && $doit_exec $cpprog "$src" "$dsttmp") &&
+ (umask $cp_umask &&
+ { test -z "$stripcmd" || {
+ # Create $dsttmp read-write so that cp doesn't create it read-only,
+ # which would cause strip to fail.
+ if test -z "$doit"; then
+ : >"$dsttmp" # No need to fork-exec 'touch'.
+ else
+ $doit touch "$dsttmp"
+ fi
+ }
+ } &&
+ $doit_exec $cpprog "$src" "$dsttmp") &&
# and set any options; do chmod last to preserve setuid bits.
#
@@ -493,9 +506,9 @@
done
# Local variables:
-# eval: (add-hook 'write-file-hooks 'time-stamp)
+# eval: (add-hook 'before-save-hook 'time-stamp)
# time-stamp-start: "scriptversion="
# time-stamp-format: "%:y-%02m-%02d.%02H"
-# time-stamp-time-zone: "UTC"
+# time-stamp-time-zone: "UTC0"
# time-stamp-end: "; # UTC"
# End:
Modified: trunk/Build/source/libs/icu/icu-src/source/install-sh
===================================================================
--- trunk/Build/source/libs/icu/icu-src/source/install-sh 2020-07-27 23:47:27 UTC (rev 55971)
+++ trunk/Build/source/libs/icu/icu-src/source/install-sh 2020-07-27 23:53:24 UTC (rev 55972)
@@ -1,7 +1,7 @@
#!/bin/sh
# install - install a program, script, or datafile
-scriptversion=2018-03-11.20; # UTC
+scriptversion=2020-07-26.22; # UTC
# This originates from X11R5 (mit/util/scripts/install.sh), which was
# later released in X11R6 (xc/config/util/install.sh) with the
@@ -69,6 +69,10 @@
# Desired mode of installed file.
mode=0755
+# Create dirs (including intermediate dirs) using mode 755.
+# This is like GNU 'install' as of coreutils 8.32 (2020).
+mkdir_umask=22
+
chgrpcmd=
chmodcmd=$chmodprog
chowncmd=
@@ -301,22 +305,6 @@
if test $dstdir_status != 0; then
case $posix_mkdir in
'')
- # Create intermediate dirs using mode 755 as modified by the umask.
- # This is like FreeBSD 'install' as of 1997-10-28.
- umask=`umask`
- case $stripcmd.$umask in
- # Optimize common cases.
- *[2367][2367]) mkdir_umask=$umask;;
- .*0[02][02] | .[02][02] | .[02]) mkdir_umask=22;;
-
- *[0-7])
- mkdir_umask=`expr $umask + 22 \
- - $umask % 100 % 40 + $umask % 20 \
- - $umask % 10 % 4 + $umask % 2
- `;;
- *) mkdir_umask=$umask,go-w;;
- esac
-
# With -d, create the new directory with the user-specified mode.
# Otherwise, rely on $mkdir_umask.
if test -n "$dir_arg"; then
@@ -326,52 +314,49 @@
fi
posix_mkdir=false
- case $umask in
- *[123567][0-7][0-7])
- # POSIX mkdir -p sets u+wx bits regardless of umask, which
- # is incompatible with FreeBSD 'install' when (umask & 300) != 0.
- ;;
- *)
- # Note that $RANDOM variable is not portable (e.g. dash); Use it
- # here however when possible just to lower collision chance.
- tmpdir=${TMPDIR-/tmp}/ins$RANDOM-$$
+ # The $RANDOM variable is not portable (e.g., dash). Use it
+ # here however when possible just to lower collision chance.
+ tmpdir=${TMPDIR-/tmp}/ins$RANDOM-$$
- trap 'ret=$?; rmdir "$tmpdir/a/b" "$tmpdir/a" "$tmpdir" 2>/dev/null; exit $ret' 0
+ trap '
+ ret=$?
+ rmdir "$tmpdir/a/b" "$tmpdir/a" "$tmpdir" 2>/dev/null
+ exit $ret
+ ' 0
- # Because "mkdir -p" follows existing symlinks and we likely work
- # directly in world-writeable /tmp, make sure that the '$tmpdir'
- # directory is successfully created first before we actually test
- # 'mkdir -p' feature.
- if (umask $mkdir_umask &&
- $mkdirprog $mkdir_mode "$tmpdir" &&
- exec $mkdirprog $mkdir_mode -p -- "$tmpdir/a/b") >/dev/null 2>&1
- then
- if test -z "$dir_arg" || {
- # Check for POSIX incompatibilities with -m.
- # HP-UX 11.23 and IRIX 6.5 mkdir -m -p sets group- or
- # other-writable bit of parent directory when it shouldn't.
- # FreeBSD 6.1 mkdir -m -p sets mode of existing directory.
- test_tmpdir="$tmpdir/a"
- ls_ld_tmpdir=`ls -ld "$test_tmpdir"`
- case $ls_ld_tmpdir in
- d????-?r-*) different_mode=700;;
- d????-?--*) different_mode=755;;
- *) false;;
- esac &&
- $mkdirprog -m$different_mode -p -- "$test_tmpdir" && {
- ls_ld_tmpdir_1=`ls -ld "$test_tmpdir"`
- test "$ls_ld_tmpdir" = "$ls_ld_tmpdir_1"
- }
- }
- then posix_mkdir=:
- fi
- rmdir "$tmpdir/a/b" "$tmpdir/a" "$tmpdir"
- else
- # Remove any dirs left behind by ancient mkdir implementations.
- rmdir ./$mkdir_mode ./-p ./-- "$tmpdir" 2>/dev/null
- fi
- trap '' 0;;
- esac;;
+ # Because "mkdir -p" follows existing symlinks and we likely work
+ # directly in world-writeable /tmp, make sure that the '$tmpdir'
+ # directory is successfully created first before we actually test
+ # 'mkdir -p'.
+ if (umask $mkdir_umask &&
+ $mkdirprog $mkdir_mode "$tmpdir" &&
+ exec $mkdirprog $mkdir_mode -p -- "$tmpdir/a/b") >/dev/null 2>&1
+ then
+ if test -z "$dir_arg" || {
+ # Check for POSIX incompatibilities with -m.
+ # HP-UX 11.23 and IRIX 6.5 mkdir -m -p sets group- or
+ # other-writable bit of parent directory when it shouldn't.
+ # FreeBSD 6.1 mkdir -m -p sets mode of existing directory.
+ test_tmpdir="$tmpdir/a"
+ ls_ld_tmpdir=`ls -ld "$test_tmpdir"`
+ case $ls_ld_tmpdir in
+ d????-?r-*) different_mode=700;;
+ d????-?--*) different_mode=755;;
+ *) false;;
+ esac &&
+ $mkdirprog -m$different_mode -p -- "$test_tmpdir" && {
+ ls_ld_tmpdir_1=`ls -ld "$test_tmpdir"`
+ test "$ls_ld_tmpdir" = "$ls_ld_tmpdir_1"
+ }
+ }
+ then posix_mkdir=:
+ fi
+ rmdir "$tmpdir/a/b" "$tmpdir/a" "$tmpdir"
+ else
+ # Remove any dirs left behind by ancient mkdir implementations.
+ rmdir ./$mkdir_mode ./-p ./-- "$tmpdir" 2>/dev/null
+ fi
+ trap '' 0;;
esac
if
@@ -382,7 +367,7 @@
then :
else
- # The umask is ridiculous, or mkdir does not conform to POSIX,
+ # mkdir does not conform to POSIX,
# or it failed possibly due to a race condition. Create the
# directory the slow way, step by step, checking for races as we go.
@@ -411,7 +396,7 @@
prefixes=
else
if $posix_mkdir; then
- (umask=$mkdir_umask &&
+ (umask $mkdir_umask &&
$doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir") && break
# Don't fail if two instances are running concurrently.
test -d "$prefix" || exit 1
Modified: trunk/Build/source/utils/asymptote/doc/FAQ/install-sh
===================================================================
--- trunk/Build/source/utils/asymptote/doc/FAQ/install-sh 2020-07-27 23:47:27 UTC (rev 55971)
+++ trunk/Build/source/utils/asymptote/doc/FAQ/install-sh 2020-07-27 23:53:24 UTC (rev 55972)
@@ -1,7 +1,7 @@
#!/bin/sh
# install - install a program, script, or datafile
-scriptversion=2009-04-28.21; # UTC
+scriptversion=2020-07-26.22; # UTC
# This originates from X11R5 (mit/util/scripts/install.sh), which was
# later released in X11R6 (xc/config/util/install.sh) with the
@@ -35,25 +35,21 @@
# FSF changes to this file are in the public domain.
#
# Calling this script install-sh is preferred over install.sh, to prevent
-# `make' implicit rules from creating a file called install from it
+# 'make' implicit rules from creating a file called install from it
# when there is no Makefile.
#
# This script is compatible with the BSD install script, but was written
# from scratch.
+tab=' '
nl='
'
-IFS=" "" $nl"
+IFS=" $tab$nl"
-# set DOITPROG to echo to test this script
+# Set DOITPROG to "echo" to test this script.
-# Don't use :- since 4.3BSD and earlier shells don't like it.
doit=${DOITPROG-}
-if test -z "$doit"; then
- doit_exec=exec
-else
- doit_exec=$doit
-fi
+doit_exec=${doit:-exec}
# Put in absolute file names if you don't have them in your path;
# or use environment vars.
@@ -68,22 +64,15 @@
rmprog=${RMPROG-rm}
stripprog=${STRIPPROG-strip}
-posix_glob='?'
-initialize_posix_glob='
- test "$posix_glob" != "?" || {
- if (set -f) 2>/dev/null; then
- posix_glob=
- else
- posix_glob=:
- fi
- }
-'
-
posix_mkdir=
# Desired mode of installed file.
mode=0755
+# Create dirs (including intermediate dirs) using mode 755.
+# This is like GNU 'install' as of coreutils 8.32 (2020).
+mkdir_umask=22
+
chgrpcmd=
chmodcmd=$chmodprog
chowncmd=
@@ -97,7 +86,7 @@
dst_arg=
copy_on_change=false
-no_target_directory=
+is_target_a_directory=possibly
usage="\
Usage: $0 [OPTION]... [-T] SRCFILE DSTFILE
@@ -137,36 +126,41 @@
-d) dir_arg=true;;
-g) chgrpcmd="$chgrpprog $2"
- shift;;
+ shift;;
--help) echo "$usage"; exit $?;;
-m) mode=$2
- case $mode in
- *' '* | *' '* | *'
-'* | *'*'* | *'?'* | *'['*)
- echo "$0: invalid mode: $mode" >&2
- exit 1;;
- esac
- shift;;
+ case $mode in
+ *' '* | *"$tab"* | *"$nl"* | *'*'* | *'?'* | *'['*)
+ echo "$0: invalid mode: $mode" >&2
+ exit 1;;
+ esac
+ shift;;
-o) chowncmd="$chownprog $2"
- shift;;
+ shift;;
-s) stripcmd=$stripprog;;
- -t) dst_arg=$2
- shift;;
+ -t)
+ is_target_a_directory=always
+ dst_arg=$2
+ # Protect names problematic for 'test' and other utilities.
+ case $dst_arg in
+ -* | [=\(\)!]) dst_arg=./$dst_arg;;
+ esac
+ shift;;
- -T) no_target_directory=true;;
+ -T) is_target_a_directory=never;;
--version) echo "$0 $scriptversion"; exit $?;;
- --) shift
- break;;
+ --) shift
+ break;;
- -*) echo "$0: invalid option: $1" >&2
- exit 1;;
+ -*) echo "$0: invalid option: $1" >&2
+ exit 1;;
*) break;;
esac
@@ -173,6 +167,16 @@
shift
done
+# We allow the use of options -d and -T together, by making -d
+# take the precedence; this is for compatibility with GNU install.
+
+if test -n "$dir_arg"; then
+ if test -n "$dst_arg"; then
+ echo "$0: target directory not allowed when installing a directory." >&2
+ exit 1
+ fi
+fi
+
if test $# -ne 0 && test -z "$dir_arg$dst_arg"; then
# When -d is used, all remaining arguments are directories to create.
# When -t is used, the destination is already specified.
@@ -186,6 +190,10 @@
fi
shift # arg
dst_arg=$arg
+ # Protect names problematic for 'test' and other utilities.
+ case $dst_arg in
+ -* | [=\(\)!]) dst_arg=./$dst_arg;;
+ esac
done
fi
@@ -194,14 +202,27 @@
echo "$0: no input file specified." >&2
exit 1
fi
- # It's OK to call `install-sh -d' without argument.
+ # It's OK to call 'install-sh -d' without argument.
# This can happen when creating conditional directories.
exit 0
fi
if test -z "$dir_arg"; then
- trap '(exit $?); exit' 1 2 13 15
+ if test $# -gt 1 || test "$is_target_a_directory" = always; then
+ if test ! -d "$dst_arg"; then
+ echo "$0: $dst_arg: Is not a directory." >&2
+ exit 1
+ fi
+ fi
+fi
+if test -z "$dir_arg"; then
+ do_exit='(exit $ret); exit $ret'
+ trap "ret=129; $do_exit" 1
+ trap "ret=130; $do_exit" 2
+ trap "ret=141; $do_exit" 13
+ trap "ret=143; $do_exit" 15
+
# Set umask so as not to create temps with too-generous modes.
# However, 'strip' requires both read and write access to temps.
case $mode in
@@ -211,16 +232,16 @@
*[0-7])
if test -z "$stripcmd"; then
- u_plus_rw=
+ u_plus_rw=
else
- u_plus_rw='% 200'
+ u_plus_rw='% 200'
fi
cp_umask=`expr '(' 777 - $mode % 1000 ')' $u_plus_rw`;;
*)
if test -z "$stripcmd"; then
- u_plus_rw=
+ u_plus_rw=
else
- u_plus_rw=,u+rw
+ u_plus_rw=,u+rw
fi
cp_umask=$mode$u_plus_rw;;
esac
@@ -228,9 +249,9 @@
for src
do
- # Protect names starting with `-'.
+ # Protect names problematic for 'test' and other utilities.
case $src in
- -*) src=./$src;;
+ -* | [=\(\)!]) src=./$src;;
esac
if test -n "$dir_arg"; then
@@ -252,151 +273,116 @@
echo "$0: no destination specified." >&2
exit 1
fi
-
dst=$dst_arg
- # Protect names starting with `-'.
- case $dst in
- -*) dst=./$dst;;
- esac
- # If destination is a directory, append the input filename; won't work
- # if double slashes aren't ignored.
+ # If destination is a directory, append the input filename.
if test -d "$dst"; then
- if test -n "$no_target_directory"; then
- echo "$0: $dst_arg: Is a directory" >&2
- exit 1
+ if test "$is_target_a_directory" = never; then
+ echo "$0: $dst_arg: Is a directory" >&2
+ exit 1
fi
dstdir=$dst
- dst=$dstdir/`basename "$src"`
+ dstbase=`basename "$src"`
+ case $dst in
+ */) dst=$dst$dstbase;;
+ *) dst=$dst/$dstbase;;
+ esac
dstdir_status=0
else
- # Prefer dirname, but fall back on a substitute if dirname fails.
- dstdir=`
- (dirname "$dst") 2>/dev/null ||
- expr X"$dst" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
- X"$dst" : 'X\(//\)[^/]' \| \
- X"$dst" : 'X\(//\)$' \| \
- X"$dst" : 'X\(/\)' \| . 2>/dev/null ||
- echo X"$dst" |
- sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
- s//\1/
- q
- }
- /^X\(\/\/\)[^/].*/{
- s//\1/
- q
- }
- /^X\(\/\/\)$/{
- s//\1/
- q
- }
- /^X\(\/\).*/{
- s//\1/
- q
- }
- s/.*/./; q'
- `
-
+ dstdir=`dirname "$dst"`
test -d "$dstdir"
dstdir_status=$?
fi
fi
+ case $dstdir in
+ */) dstdirslash=$dstdir;;
+ *) dstdirslash=$dstdir/;;
+ esac
+
obsolete_mkdir_used=false
if test $dstdir_status != 0; then
case $posix_mkdir in
'')
- # Create intermediate dirs using mode 755 as modified by the umask.
- # This is like FreeBSD 'install' as of 1997-10-28.
- umask=`umask`
- case $stripcmd.$umask in
- # Optimize common cases.
- *[2367][2367]) mkdir_umask=$umask;;
- .*0[02][02] | .[02][02] | .[02]) mkdir_umask=22;;
+ # With -d, create the new directory with the user-specified mode.
+ # Otherwise, rely on $mkdir_umask.
+ if test -n "$dir_arg"; then
+ mkdir_mode=-m$mode
+ else
+ mkdir_mode=
+ fi
- *[0-7])
- mkdir_umask=`expr $umask + 22 \
- - $umask % 100 % 40 + $umask % 20 \
- - $umask % 10 % 4 + $umask % 2
- `;;
- *) mkdir_umask=$umask,go-w;;
- esac
+ posix_mkdir=false
+ # The $RANDOM variable is not portable (e.g., dash). Use it
+ # here however when possible just to lower collision chance.
+ tmpdir=${TMPDIR-/tmp}/ins$RANDOM-$$
- # With -d, create the new directory with the user-specified mode.
- # Otherwise, rely on $mkdir_umask.
- if test -n "$dir_arg"; then
- mkdir_mode=-m$mode
+ trap '
+ ret=$?
+ rmdir "$tmpdir/a/b" "$tmpdir/a" "$tmpdir" 2>/dev/null
+ exit $ret
+ ' 0
+
+ # Because "mkdir -p" follows existing symlinks and we likely work
+ # directly in world-writeable /tmp, make sure that the '$tmpdir'
+ # directory is successfully created first before we actually test
+ # 'mkdir -p'.
+ if (umask $mkdir_umask &&
+ $mkdirprog $mkdir_mode "$tmpdir" &&
+ exec $mkdirprog $mkdir_mode -p -- "$tmpdir/a/b") >/dev/null 2>&1
+ then
+ if test -z "$dir_arg" || {
+ # Check for POSIX incompatibilities with -m.
+ # HP-UX 11.23 and IRIX 6.5 mkdir -m -p sets group- or
+ # other-writable bit of parent directory when it shouldn't.
+ # FreeBSD 6.1 mkdir -m -p sets mode of existing directory.
+ test_tmpdir="$tmpdir/a"
+ ls_ld_tmpdir=`ls -ld "$test_tmpdir"`
+ case $ls_ld_tmpdir in
+ d????-?r-*) different_mode=700;;
+ d????-?--*) different_mode=755;;
+ *) false;;
+ esac &&
+ $mkdirprog -m$different_mode -p -- "$test_tmpdir" && {
+ ls_ld_tmpdir_1=`ls -ld "$test_tmpdir"`
+ test "$ls_ld_tmpdir" = "$ls_ld_tmpdir_1"
+ }
+ }
+ then posix_mkdir=:
+ fi
+ rmdir "$tmpdir/a/b" "$tmpdir/a" "$tmpdir"
else
- mkdir_mode=
+ # Remove any dirs left behind by ancient mkdir implementations.
+ rmdir ./$mkdir_mode ./-p ./-- "$tmpdir" 2>/dev/null
fi
-
- posix_mkdir=false
- case $umask in
- *[123567][0-7][0-7])
- # POSIX mkdir -p sets u+wx bits regardless of umask, which
- # is incompatible with FreeBSD 'install' when (umask & 300) != 0.
- ;;
- *)
- tmpdir=${TMPDIR-/tmp}/ins$RANDOM-$$
- trap 'ret=$?; rmdir "$tmpdir/d" "$tmpdir" 2>/dev/null; exit $ret' 0
-
- if (umask $mkdir_umask &&
- exec $mkdirprog $mkdir_mode -p -- "$tmpdir/d") >/dev/null 2>&1
- then
- if test -z "$dir_arg" || {
- # Check for POSIX incompatibilities with -m.
- # HP-UX 11.23 and IRIX 6.5 mkdir -m -p sets group- or
- # other-writeable bit of parent directory when it shouldn't.
- # FreeBSD 6.1 mkdir -m -p sets mode of existing directory.
- ls_ld_tmpdir=`ls -ld "$tmpdir"`
- case $ls_ld_tmpdir in
- d????-?r-*) different_mode=700;;
- d????-?--*) different_mode=755;;
- *) false;;
- esac &&
- $mkdirprog -m$different_mode -p -- "$tmpdir" && {
- ls_ld_tmpdir_1=`ls -ld "$tmpdir"`
- test "$ls_ld_tmpdir" = "$ls_ld_tmpdir_1"
- }
- }
- then posix_mkdir=:
- fi
- rmdir "$tmpdir/d" "$tmpdir"
- else
- # Remove any dirs left behind by ancient mkdir implementations.
- rmdir ./$mkdir_mode ./-p ./-- 2>/dev/null
- fi
- trap '' 0;;
- esac;;
+ trap '' 0;;
esac
if
$posix_mkdir && (
- umask $mkdir_umask &&
- $doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir"
+ umask $mkdir_umask &&
+ $doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir"
)
then :
else
- # The umask is ridiculous, or mkdir does not conform to POSIX,
+ # mkdir does not conform to POSIX,
# or it failed possibly due to a race condition. Create the
# directory the slow way, step by step, checking for races as we go.
case $dstdir in
- /*) prefix='/';;
- -*) prefix='./';;
- *) prefix='';;
+ /*) prefix='/';;
+ [-=\(\)!]*) prefix='./';;
+ *) prefix='';;
esac
- eval "$initialize_posix_glob"
-
oIFS=$IFS
IFS=/
- $posix_glob set -f
+ set -f
set fnord $dstdir
shift
- $posix_glob set +f
+ set +f
IFS=$oIFS
prefixes=
@@ -403,34 +389,34 @@
for d
do
- test -z "$d" && continue
+ test X"$d" = X && continue
- prefix=$prefix$d
- if test -d "$prefix"; then
- prefixes=
- else
- if $posix_mkdir; then
- (umask=$mkdir_umask &&
- $doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir") && break
- # Don't fail if two instances are running concurrently.
- test -d "$prefix" || exit 1
- else
- case $prefix in
- *\'*) qprefix=`echo "$prefix" | sed "s/'/'\\\\\\\\''/g"`;;
- *) qprefix=$prefix;;
- esac
- prefixes="$prefixes '$qprefix'"
- fi
- fi
- prefix=$prefix/
+ prefix=$prefix$d
+ if test -d "$prefix"; then
+ prefixes=
+ else
+ if $posix_mkdir; then
+ (umask $mkdir_umask &&
+ $doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir") && break
+ # Don't fail if two instances are running concurrently.
+ test -d "$prefix" || exit 1
+ else
+ case $prefix in
+ *\'*) qprefix=`echo "$prefix" | sed "s/'/'\\\\\\\\''/g"`;;
+ *) qprefix=$prefix;;
+ esac
+ prefixes="$prefixes '$qprefix'"
+ fi
+ fi
+ prefix=$prefix/
done
if test -n "$prefixes"; then
- # Don't fail if two instances are running concurrently.
- (umask $mkdir_umask &&
- eval "\$doit_exec \$mkdirprog $prefixes") ||
- test -d "$dstdir" || exit 1
- obsolete_mkdir_used=true
+ # Don't fail if two instances are running concurrently.
+ (umask $mkdir_umask &&
+ eval "\$doit_exec \$mkdirprog $prefixes") ||
+ test -d "$dstdir" || exit 1
+ obsolete_mkdir_used=true
fi
fi
fi
@@ -443,14 +429,25 @@
else
# Make a couple of temp file names in the proper directory.
- dsttmp=$dstdir/_inst.$$_
- rmtmp=$dstdir/_rm.$$_
+ dsttmp=${dstdirslash}_inst.$$_
+ rmtmp=${dstdirslash}_rm.$$_
# Trap to clean up those temp files at exit.
trap 'ret=$?; rm -f "$dsttmp" "$rmtmp" && exit $ret' 0
# Copy the file name to the temp name.
- (umask $cp_umask && $doit_exec $cpprog "$src" "$dsttmp") &&
+ (umask $cp_umask &&
+ { test -z "$stripcmd" || {
+ # Create $dsttmp read-write so that cp doesn't create it read-only,
+ # which would cause strip to fail.
+ if test -z "$doit"; then
+ : >"$dsttmp" # No need to fork-exec 'touch'.
+ else
+ $doit touch "$dsttmp"
+ fi
+ }
+ } &&
+ $doit_exec $cpprog "$src" "$dsttmp") &&
# and set any options; do chmod last to preserve setuid bits.
#
@@ -465,15 +462,12 @@
# If -C, don't bother to copy if it wouldn't change the file.
if $copy_on_change &&
- old=`LC_ALL=C ls -dlL "$dst" 2>/dev/null` &&
- new=`LC_ALL=C ls -dlL "$dsttmp" 2>/dev/null` &&
-
- eval "$initialize_posix_glob" &&
- $posix_glob set -f &&
+ old=`LC_ALL=C ls -dlL "$dst" 2>/dev/null` &&
+ new=`LC_ALL=C ls -dlL "$dsttmp" 2>/dev/null` &&
+ set -f &&
set X $old && old=:$2:$4:$5:$6 &&
set X $new && new=:$2:$4:$5:$6 &&
- $posix_glob set +f &&
-
+ set +f &&
test "$old" = "$new" &&
$cmpprog "$dst" "$dsttmp" >/dev/null 2>&1
then
@@ -486,24 +480,24 @@
# to itself, or perhaps because mv is so ancient that it does not
# support -f.
{
- # Now remove or move aside any old file at destination location.
- # We try this two ways since rm can't unlink itself on some
- # systems and the destination file might be busy for other
- # reasons. In this case, the final cleanup might fail but the new
- # file should still install successfully.
- {
- test ! -f "$dst" ||
- $doit $rmcmd -f "$dst" 2>/dev/null ||
- { $doit $mvcmd -f "$dst" "$rmtmp" 2>/dev/null &&
- { $doit $rmcmd -f "$rmtmp" 2>/dev/null; :; }
- } ||
- { echo "$0: cannot unlink or rename $dst" >&2
- (exit 1); exit 1
- }
- } &&
+ # Now remove or move aside any old file at destination location.
+ # We try this two ways since rm can't unlink itself on some
+ # systems and the destination file might be busy for other
+ # reasons. In this case, the final cleanup might fail but the new
+ # file should still install successfully.
+ {
+ test ! -f "$dst" ||
+ $doit $rmcmd -f "$dst" 2>/dev/null ||
+ { $doit $mvcmd -f "$dst" "$rmtmp" 2>/dev/null &&
+ { $doit $rmcmd -f "$rmtmp" 2>/dev/null; :; }
+ } ||
+ { echo "$0: cannot unlink or rename $dst" >&2
+ (exit 1); exit 1
+ }
+ } &&
- # Now rename the file to the real destination.
- $doit $mvcmd "$dsttmp" "$dst"
+ # Now rename the file to the real destination.
+ $doit $mvcmd "$dsttmp" "$dst"
}
fi || exit 1
@@ -512,9 +506,9 @@
done
# Local variables:
-# eval: (add-hook 'write-file-hooks 'time-stamp)
+# eval: (add-hook 'before-save-hook 'time-stamp)
# time-stamp-start: "scriptversion="
# time-stamp-format: "%:y-%02m-%02d.%02H"
-# time-stamp-time-zone: "UTC"
+# time-stamp-time-zone: "UTC0"
# time-stamp-end: "; # UTC"
# End:
Modified: trunk/Build/source/utils/asymptote/doc/install-sh
===================================================================
--- trunk/Build/source/utils/asymptote/doc/install-sh 2020-07-27 23:47:27 UTC (rev 55971)
+++ trunk/Build/source/utils/asymptote/doc/install-sh 2020-07-27 23:53:24 UTC (rev 55972)
@@ -1,7 +1,7 @@
#!/bin/sh
# install - install a program, script, or datafile
-scriptversion=2009-04-28.21; # UTC
+scriptversion=2020-07-26.22; # UTC
# This originates from X11R5 (mit/util/scripts/install.sh), which was
# later released in X11R6 (xc/config/util/install.sh) with the
@@ -35,25 +35,21 @@
# FSF changes to this file are in the public domain.
#
# Calling this script install-sh is preferred over install.sh, to prevent
-# `make' implicit rules from creating a file called install from it
+# 'make' implicit rules from creating a file called install from it
# when there is no Makefile.
#
# This script is compatible with the BSD install script, but was written
# from scratch.
+tab=' '
nl='
'
-IFS=" "" $nl"
+IFS=" $tab$nl"
-# set DOITPROG to echo to test this script
+# Set DOITPROG to "echo" to test this script.
-# Don't use :- since 4.3BSD and earlier shells don't like it.
doit=${DOITPROG-}
-if test -z "$doit"; then
- doit_exec=exec
-else
- doit_exec=$doit
-fi
+doit_exec=${doit:-exec}
# Put in absolute file names if you don't have them in your path;
# or use environment vars.
@@ -68,22 +64,15 @@
rmprog=${RMPROG-rm}
stripprog=${STRIPPROG-strip}
-posix_glob='?'
-initialize_posix_glob='
- test "$posix_glob" != "?" || {
- if (set -f) 2>/dev/null; then
- posix_glob=
- else
- posix_glob=:
- fi
- }
-'
-
posix_mkdir=
# Desired mode of installed file.
mode=0755
+# Create dirs (including intermediate dirs) using mode 755.
+# This is like GNU 'install' as of coreutils 8.32 (2020).
+mkdir_umask=22
+
chgrpcmd=
chmodcmd=$chmodprog
chowncmd=
@@ -97,7 +86,7 @@
dst_arg=
copy_on_change=false
-no_target_directory=
+is_target_a_directory=possibly
usage="\
Usage: $0 [OPTION]... [-T] SRCFILE DSTFILE
@@ -137,36 +126,41 @@
-d) dir_arg=true;;
-g) chgrpcmd="$chgrpprog $2"
- shift;;
+ shift;;
--help) echo "$usage"; exit $?;;
-m) mode=$2
- case $mode in
- *' '* | *' '* | *'
-'* | *'*'* | *'?'* | *'['*)
- echo "$0: invalid mode: $mode" >&2
- exit 1;;
- esac
- shift;;
+ case $mode in
+ *' '* | *"$tab"* | *"$nl"* | *'*'* | *'?'* | *'['*)
+ echo "$0: invalid mode: $mode" >&2
+ exit 1;;
+ esac
+ shift;;
-o) chowncmd="$chownprog $2"
- shift;;
+ shift;;
-s) stripcmd=$stripprog;;
- -t) dst_arg=$2
- shift;;
+ -t)
+ is_target_a_directory=always
+ dst_arg=$2
+ # Protect names problematic for 'test' and other utilities.
+ case $dst_arg in
+ -* | [=\(\)!]) dst_arg=./$dst_arg;;
+ esac
+ shift;;
- -T) no_target_directory=true;;
+ -T) is_target_a_directory=never;;
--version) echo "$0 $scriptversion"; exit $?;;
- --) shift
- break;;
+ --) shift
+ break;;
- -*) echo "$0: invalid option: $1" >&2
- exit 1;;
+ -*) echo "$0: invalid option: $1" >&2
+ exit 1;;
*) break;;
esac
@@ -173,6 +167,16 @@
shift
done
+# We allow the use of options -d and -T together, by making -d
+# take the precedence; this is for compatibility with GNU install.
+
+if test -n "$dir_arg"; then
+ if test -n "$dst_arg"; then
+ echo "$0: target directory not allowed when installing a directory." >&2
+ exit 1
+ fi
+fi
+
if test $# -ne 0 && test -z "$dir_arg$dst_arg"; then
# When -d is used, all remaining arguments are directories to create.
# When -t is used, the destination is already specified.
@@ -186,6 +190,10 @@
fi
shift # arg
dst_arg=$arg
+ # Protect names problematic for 'test' and other utilities.
+ case $dst_arg in
+ -* | [=\(\)!]) dst_arg=./$dst_arg;;
+ esac
done
fi
@@ -194,14 +202,27 @@
echo "$0: no input file specified." >&2
exit 1
fi
- # It's OK to call `install-sh -d' without argument.
+ # It's OK to call 'install-sh -d' without argument.
# This can happen when creating conditional directories.
exit 0
fi
if test -z "$dir_arg"; then
- trap '(exit $?); exit' 1 2 13 15
+ if test $# -gt 1 || test "$is_target_a_directory" = always; then
+ if test ! -d "$dst_arg"; then
+ echo "$0: $dst_arg: Is not a directory." >&2
+ exit 1
+ fi
+ fi
+fi
+if test -z "$dir_arg"; then
+ do_exit='(exit $ret); exit $ret'
+ trap "ret=129; $do_exit" 1
+ trap "ret=130; $do_exit" 2
+ trap "ret=141; $do_exit" 13
+ trap "ret=143; $do_exit" 15
+
# Set umask so as not to create temps with too-generous modes.
# However, 'strip' requires both read and write access to temps.
case $mode in
@@ -211,16 +232,16 @@
*[0-7])
if test -z "$stripcmd"; then
- u_plus_rw=
+ u_plus_rw=
else
- u_plus_rw='% 200'
+ u_plus_rw='% 200'
fi
cp_umask=`expr '(' 777 - $mode % 1000 ')' $u_plus_rw`;;
*)
if test -z "$stripcmd"; then
- u_plus_rw=
+ u_plus_rw=
else
- u_plus_rw=,u+rw
+ u_plus_rw=,u+rw
fi
cp_umask=$mode$u_plus_rw;;
esac
@@ -228,9 +249,9 @@
for src
do
- # Protect names starting with `-'.
+ # Protect names problematic for 'test' and other utilities.
case $src in
- -*) src=./$src;;
+ -* | [=\(\)!]) src=./$src;;
esac
if test -n "$dir_arg"; then
@@ -252,151 +273,116 @@
echo "$0: no destination specified." >&2
exit 1
fi
-
dst=$dst_arg
- # Protect names starting with `-'.
- case $dst in
- -*) dst=./$dst;;
- esac
- # If destination is a directory, append the input filename; won't work
- # if double slashes aren't ignored.
+ # If destination is a directory, append the input filename.
if test -d "$dst"; then
- if test -n "$no_target_directory"; then
- echo "$0: $dst_arg: Is a directory" >&2
- exit 1
+ if test "$is_target_a_directory" = never; then
+ echo "$0: $dst_arg: Is a directory" >&2
+ exit 1
fi
dstdir=$dst
- dst=$dstdir/`basename "$src"`
+ dstbase=`basename "$src"`
+ case $dst in
+ */) dst=$dst$dstbase;;
+ *) dst=$dst/$dstbase;;
+ esac
dstdir_status=0
else
- # Prefer dirname, but fall back on a substitute if dirname fails.
- dstdir=`
- (dirname "$dst") 2>/dev/null ||
- expr X"$dst" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
- X"$dst" : 'X\(//\)[^/]' \| \
- X"$dst" : 'X\(//\)$' \| \
- X"$dst" : 'X\(/\)' \| . 2>/dev/null ||
- echo X"$dst" |
- sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
- s//\1/
- q
- }
- /^X\(\/\/\)[^/].*/{
- s//\1/
- q
- }
- /^X\(\/\/\)$/{
- s//\1/
- q
- }
- /^X\(\/\).*/{
- s//\1/
- q
- }
- s/.*/./; q'
- `
-
+ dstdir=`dirname "$dst"`
test -d "$dstdir"
dstdir_status=$?
fi
fi
+ case $dstdir in
+ */) dstdirslash=$dstdir;;
+ *) dstdirslash=$dstdir/;;
+ esac
+
obsolete_mkdir_used=false
if test $dstdir_status != 0; then
case $posix_mkdir in
'')
- # Create intermediate dirs using mode 755 as modified by the umask.
- # This is like FreeBSD 'install' as of 1997-10-28.
- umask=`umask`
- case $stripcmd.$umask in
- # Optimize common cases.
- *[2367][2367]) mkdir_umask=$umask;;
- .*0[02][02] | .[02][02] | .[02]) mkdir_umask=22;;
+ # With -d, create the new directory with the user-specified mode.
+ # Otherwise, rely on $mkdir_umask.
+ if test -n "$dir_arg"; then
+ mkdir_mode=-m$mode
+ else
+ mkdir_mode=
+ fi
- *[0-7])
- mkdir_umask=`expr $umask + 22 \
- - $umask % 100 % 40 + $umask % 20 \
- - $umask % 10 % 4 + $umask % 2
- `;;
- *) mkdir_umask=$umask,go-w;;
- esac
+ posix_mkdir=false
+ # The $RANDOM variable is not portable (e.g., dash). Use it
+ # here however when possible just to lower collision chance.
+ tmpdir=${TMPDIR-/tmp}/ins$RANDOM-$$
- # With -d, create the new directory with the user-specified mode.
- # Otherwise, rely on $mkdir_umask.
- if test -n "$dir_arg"; then
- mkdir_mode=-m$mode
+ trap '
+ ret=$?
+ rmdir "$tmpdir/a/b" "$tmpdir/a" "$tmpdir" 2>/dev/null
+ exit $ret
+ ' 0
+
+ # Because "mkdir -p" follows existing symlinks and we likely work
+ # directly in world-writeable /tmp, make sure that the '$tmpdir'
+ # directory is successfully created first before we actually test
+ # 'mkdir -p'.
+ if (umask $mkdir_umask &&
+ $mkdirprog $mkdir_mode "$tmpdir" &&
+ exec $mkdirprog $mkdir_mode -p -- "$tmpdir/a/b") >/dev/null 2>&1
+ then
+ if test -z "$dir_arg" || {
+ # Check for POSIX incompatibilities with -m.
+ # HP-UX 11.23 and IRIX 6.5 mkdir -m -p sets group- or
+ # other-writable bit of parent directory when it shouldn't.
+ # FreeBSD 6.1 mkdir -m -p sets mode of existing directory.
+ test_tmpdir="$tmpdir/a"
+ ls_ld_tmpdir=`ls -ld "$test_tmpdir"`
+ case $ls_ld_tmpdir in
+ d????-?r-*) different_mode=700;;
+ d????-?--*) different_mode=755;;
+ *) false;;
+ esac &&
+ $mkdirprog -m$different_mode -p -- "$test_tmpdir" && {
+ ls_ld_tmpdir_1=`ls -ld "$test_tmpdir"`
+ test "$ls_ld_tmpdir" = "$ls_ld_tmpdir_1"
+ }
+ }
+ then posix_mkdir=:
+ fi
+ rmdir "$tmpdir/a/b" "$tmpdir/a" "$tmpdir"
else
- mkdir_mode=
+ # Remove any dirs left behind by ancient mkdir implementations.
+ rmdir ./$mkdir_mode ./-p ./-- "$tmpdir" 2>/dev/null
fi
-
- posix_mkdir=false
- case $umask in
- *[123567][0-7][0-7])
- # POSIX mkdir -p sets u+wx bits regardless of umask, which
- # is incompatible with FreeBSD 'install' when (umask & 300) != 0.
- ;;
- *)
- tmpdir=${TMPDIR-/tmp}/ins$RANDOM-$$
- trap 'ret=$?; rmdir "$tmpdir/d" "$tmpdir" 2>/dev/null; exit $ret' 0
-
- if (umask $mkdir_umask &&
- exec $mkdirprog $mkdir_mode -p -- "$tmpdir/d") >/dev/null 2>&1
- then
- if test -z "$dir_arg" || {
- # Check for POSIX incompatibilities with -m.
- # HP-UX 11.23 and IRIX 6.5 mkdir -m -p sets group- or
- # other-writeable bit of parent directory when it shouldn't.
- # FreeBSD 6.1 mkdir -m -p sets mode of existing directory.
- ls_ld_tmpdir=`ls -ld "$tmpdir"`
- case $ls_ld_tmpdir in
- d????-?r-*) different_mode=700;;
- d????-?--*) different_mode=755;;
- *) false;;
- esac &&
- $mkdirprog -m$different_mode -p -- "$tmpdir" && {
- ls_ld_tmpdir_1=`ls -ld "$tmpdir"`
- test "$ls_ld_tmpdir" = "$ls_ld_tmpdir_1"
- }
- }
- then posix_mkdir=:
- fi
- rmdir "$tmpdir/d" "$tmpdir"
- else
- # Remove any dirs left behind by ancient mkdir implementations.
- rmdir ./$mkdir_mode ./-p ./-- 2>/dev/null
- fi
- trap '' 0;;
- esac;;
+ trap '' 0;;
esac
if
$posix_mkdir && (
- umask $mkdir_umask &&
- $doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir"
+ umask $mkdir_umask &&
+ $doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir"
)
then :
else
- # The umask is ridiculous, or mkdir does not conform to POSIX,
+ # mkdir does not conform to POSIX,
# or it failed possibly due to a race condition. Create the
# directory the slow way, step by step, checking for races as we go.
case $dstdir in
- /*) prefix='/';;
- -*) prefix='./';;
- *) prefix='';;
+ /*) prefix='/';;
+ [-=\(\)!]*) prefix='./';;
+ *) prefix='';;
esac
- eval "$initialize_posix_glob"
-
oIFS=$IFS
IFS=/
- $posix_glob set -f
+ set -f
set fnord $dstdir
shift
- $posix_glob set +f
+ set +f
IFS=$oIFS
prefixes=
@@ -403,34 +389,34 @@
for d
do
- test -z "$d" && continue
+ test X"$d" = X && continue
- prefix=$prefix$d
- if test -d "$prefix"; then
- prefixes=
- else
- if $posix_mkdir; then
- (umask=$mkdir_umask &&
- $doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir") && break
- # Don't fail if two instances are running concurrently.
- test -d "$prefix" || exit 1
- else
- case $prefix in
- *\'*) qprefix=`echo "$prefix" | sed "s/'/'\\\\\\\\''/g"`;;
- *) qprefix=$prefix;;
- esac
- prefixes="$prefixes '$qprefix'"
- fi
- fi
- prefix=$prefix/
+ prefix=$prefix$d
+ if test -d "$prefix"; then
+ prefixes=
+ else
+ if $posix_mkdir; then
+ (umask $mkdir_umask &&
+ $doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir") && break
+ # Don't fail if two instances are running concurrently.
+ test -d "$prefix" || exit 1
+ else
+ case $prefix in
+ *\'*) qprefix=`echo "$prefix" | sed "s/'/'\\\\\\\\''/g"`;;
+ *) qprefix=$prefix;;
+ esac
+ prefixes="$prefixes '$qprefix'"
+ fi
+ fi
+ prefix=$prefix/
done
if test -n "$prefixes"; then
- # Don't fail if two instances are running concurrently.
- (umask $mkdir_umask &&
- eval "\$doit_exec \$mkdirprog $prefixes") ||
- test -d "$dstdir" || exit 1
- obsolete_mkdir_used=true
+ # Don't fail if two instances are running concurrently.
+ (umask $mkdir_umask &&
+ eval "\$doit_exec \$mkdirprog $prefixes") ||
+ test -d "$dstdir" || exit 1
+ obsolete_mkdir_used=true
fi
fi
fi
@@ -443,14 +429,25 @@
else
# Make a couple of temp file names in the proper directory.
- dsttmp=$dstdir/_inst.$$_
- rmtmp=$dstdir/_rm.$$_
+ dsttmp=${dstdirslash}_inst.$$_
+ rmtmp=${dstdirslash}_rm.$$_
# Trap to clean up those temp files at exit.
trap 'ret=$?; rm -f "$dsttmp" "$rmtmp" && exit $ret' 0
# Copy the file name to the temp name.
- (umask $cp_umask && $doit_exec $cpprog "$src" "$dsttmp") &&
+ (umask $cp_umask &&
+ { test -z "$stripcmd" || {
+ # Create $dsttmp read-write so that cp doesn't create it read-only,
+ # which would cause strip to fail.
+ if test -z "$doit"; then
+ : >"$dsttmp" # No need to fork-exec 'touch'.
+ else
+ $doit touch "$dsttmp"
+ fi
+ }
+ } &&
+ $doit_exec $cpprog "$src" "$dsttmp") &&
# and set any options; do chmod last to preserve setuid bits.
#
@@ -465,15 +462,12 @@
# If -C, don't bother to copy if it wouldn't change the file.
if $copy_on_change &&
- old=`LC_ALL=C ls -dlL "$dst" 2>/dev/null` &&
- new=`LC_ALL=C ls -dlL "$dsttmp" 2>/dev/null` &&
-
- eval "$initialize_posix_glob" &&
- $posix_glob set -f &&
+ old=`LC_ALL=C ls -dlL "$dst" 2>/dev/null` &&
+ new=`LC_ALL=C ls -dlL "$dsttmp" 2>/dev/null` &&
+ set -f &&
set X $old && old=:$2:$4:$5:$6 &&
set X $new && new=:$2:$4:$5:$6 &&
- $posix_glob set +f &&
-
+ set +f &&
test "$old" = "$new" &&
$cmpprog "$dst" "$dsttmp" >/dev/null 2>&1
then
@@ -486,24 +480,24 @@
# to itself, or perhaps because mv is so ancient that it does not
# support -f.
{
- # Now remove or move aside any old file at destination location.
- # We try this two ways since rm can't unlink itself on some
- # systems and the destination file might be busy for other
- # reasons. In this case, the final cleanup might fail but the new
- # file should still install successfully.
- {
- test ! -f "$dst" ||
- $doit $rmcmd -f "$dst" 2>/dev/null ||
- { $doit $mvcmd -f "$dst" "$rmtmp" 2>/dev/null &&
- { $doit $rmcmd -f "$rmtmp" 2>/dev/null; :; }
- } ||
- { echo "$0: cannot unlink or rename $dst" >&2
- (exit 1); exit 1
- }
- } &&
+ # Now remove or move aside any old file at destination location.
+ # We try this two ways since rm can't unlink itself on some
+ # systems and the destination file might be busy for other
+ # reasons. In this case, the final cleanup might fail but the new
+ # file should still install successfully.
+ {
+ test ! -f "$dst" ||
+ $doit $rmcmd -f "$dst" 2>/dev/null ||
+ { $doit $mvcmd -f "$dst" "$rmtmp" 2>/dev/null &&
+ { $doit $rmcmd -f "$rmtmp" 2>/dev/null; :; }
+ } ||
+ { echo "$0: cannot unlink or rename $dst" >&2
+ (exit 1); exit 1
+ }
+ } &&
- # Now rename the file to the real destination.
- $doit $mvcmd "$dsttmp" "$dst"
+ # Now rename the file to the real destination.
+ $doit $mvcmd "$dsttmp" "$dst"
}
fi || exit 1
@@ -512,9 +506,9 @@
done
# Local variables:
-# eval: (add-hook 'write-file-hooks 'time-stamp)
+# eval: (add-hook 'before-save-hook 'time-stamp)
# time-stamp-start: "scriptversion="
# time-stamp-format: "%:y-%02m-%02d.%02H"
-# time-stamp-time-zone: "UTC"
+# time-stamp-time-zone: "UTC0"
# time-stamp-end: "; # UTC"
# End:
Modified: trunk/Build/source/utils/asymptote/install-sh
===================================================================
--- trunk/Build/source/utils/asymptote/install-sh 2020-07-27 23:47:27 UTC (rev 55971)
+++ trunk/Build/source/utils/asymptote/install-sh 2020-07-27 23:53:24 UTC (rev 55972)
@@ -1,7 +1,7 @@
#!/bin/sh
# install - install a program, script, or datafile
-scriptversion=2009-04-28.21; # UTC
+scriptversion=2020-07-26.22; # UTC
# This originates from X11R5 (mit/util/scripts/install.sh), which was
# later released in X11R6 (xc/config/util/install.sh) with the
@@ -35,25 +35,21 @@
# FSF changes to this file are in the public domain.
#
# Calling this script install-sh is preferred over install.sh, to prevent
-# `make' implicit rules from creating a file called install from it
+# 'make' implicit rules from creating a file called install from it
# when there is no Makefile.
#
# This script is compatible with the BSD install script, but was written
# from scratch.
+tab=' '
nl='
'
-IFS=" "" $nl"
+IFS=" $tab$nl"
-# set DOITPROG to echo to test this script
+# Set DOITPROG to "echo" to test this script.
-# Don't use :- since 4.3BSD and earlier shells don't like it.
doit=${DOITPROG-}
-if test -z "$doit"; then
- doit_exec=exec
-else
- doit_exec=$doit
-fi
+doit_exec=${doit:-exec}
# Put in absolute file names if you don't have them in your path;
# or use environment vars.
@@ -68,22 +64,15 @@
rmprog=${RMPROG-rm}
stripprog=${STRIPPROG-strip}
-posix_glob='?'
-initialize_posix_glob='
- test "$posix_glob" != "?" || {
- if (set -f) 2>/dev/null; then
- posix_glob=
- else
- posix_glob=:
- fi
- }
-'
-
posix_mkdir=
# Desired mode of installed file.
mode=0755
+# Create dirs (including intermediate dirs) using mode 755.
+# This is like GNU 'install' as of coreutils 8.32 (2020).
+mkdir_umask=22
+
chgrpcmd=
chmodcmd=$chmodprog
chowncmd=
@@ -97,7 +86,7 @@
dst_arg=
copy_on_change=false
-no_target_directory=
+is_target_a_directory=possibly
usage="\
Usage: $0 [OPTION]... [-T] SRCFILE DSTFILE
@@ -137,36 +126,41 @@
-d) dir_arg=true;;
-g) chgrpcmd="$chgrpprog $2"
- shift;;
+ shift;;
--help) echo "$usage"; exit $?;;
-m) mode=$2
- case $mode in
- *' '* | *' '* | *'
-'* | *'*'* | *'?'* | *'['*)
- echo "$0: invalid mode: $mode" >&2
- exit 1;;
- esac
- shift;;
+ case $mode in
+ *' '* | *"$tab"* | *"$nl"* | *'*'* | *'?'* | *'['*)
+ echo "$0: invalid mode: $mode" >&2
+ exit 1;;
+ esac
+ shift;;
-o) chowncmd="$chownprog $2"
- shift;;
+ shift;;
-s) stripcmd=$stripprog;;
- -t) dst_arg=$2
- shift;;
+ -t)
+ is_target_a_directory=always
+ dst_arg=$2
+ # Protect names problematic for 'test' and other utilities.
+ case $dst_arg in
+ -* | [=\(\)!]) dst_arg=./$dst_arg;;
+ esac
+ shift;;
- -T) no_target_directory=true;;
+ -T) is_target_a_directory=never;;
--version) echo "$0 $scriptversion"; exit $?;;
- --) shift
- break;;
+ --) shift
+ break;;
- -*) echo "$0: invalid option: $1" >&2
- exit 1;;
+ -*) echo "$0: invalid option: $1" >&2
+ exit 1;;
*) break;;
esac
@@ -173,6 +167,16 @@
shift
done
+# We allow the use of options -d and -T together, by making -d
+# take the precedence; this is for compatibility with GNU install.
+
+if test -n "$dir_arg"; then
+ if test -n "$dst_arg"; then
+ echo "$0: target directory not allowed when installing a directory." >&2
+ exit 1
+ fi
+fi
+
if test $# -ne 0 && test -z "$dir_arg$dst_arg"; then
# When -d is used, all remaining arguments are directories to create.
# When -t is used, the destination is already specified.
@@ -186,6 +190,10 @@
fi
shift # arg
dst_arg=$arg
+ # Protect names problematic for 'test' and other utilities.
+ case $dst_arg in
+ -* | [=\(\)!]) dst_arg=./$dst_arg;;
+ esac
done
fi
@@ -194,14 +202,27 @@
echo "$0: no input file specified." >&2
exit 1
fi
- # It's OK to call `install-sh -d' without argument.
+ # It's OK to call 'install-sh -d' without argument.
# This can happen when creating conditional directories.
exit 0
fi
if test -z "$dir_arg"; then
- trap '(exit $?); exit' 1 2 13 15
+ if test $# -gt 1 || test "$is_target_a_directory" = always; then
+ if test ! -d "$dst_arg"; then
+ echo "$0: $dst_arg: Is not a directory." >&2
+ exit 1
+ fi
+ fi
+fi
+if test -z "$dir_arg"; then
+ do_exit='(exit $ret); exit $ret'
+ trap "ret=129; $do_exit" 1
+ trap "ret=130; $do_exit" 2
+ trap "ret=141; $do_exit" 13
+ trap "ret=143; $do_exit" 15
+
# Set umask so as not to create temps with too-generous modes.
# However, 'strip' requires both read and write access to temps.
case $mode in
@@ -211,16 +232,16 @@
*[0-7])
if test -z "$stripcmd"; then
- u_plus_rw=
+ u_plus_rw=
else
- u_plus_rw='% 200'
+ u_plus_rw='% 200'
fi
cp_umask=`expr '(' 777 - $mode % 1000 ')' $u_plus_rw`;;
*)
if test -z "$stripcmd"; then
- u_plus_rw=
+ u_plus_rw=
else
- u_plus_rw=,u+rw
+ u_plus_rw=,u+rw
fi
cp_umask=$mode$u_plus_rw;;
esac
@@ -228,9 +249,9 @@
for src
do
- # Protect names starting with `-'.
+ # Protect names problematic for 'test' and other utilities.
case $src in
- -*) src=./$src;;
+ -* | [=\(\)!]) src=./$src;;
esac
if test -n "$dir_arg"; then
@@ -252,151 +273,116 @@
echo "$0: no destination specified." >&2
exit 1
fi
-
dst=$dst_arg
- # Protect names starting with `-'.
- case $dst in
- -*) dst=./$dst;;
- esac
- # If destination is a directory, append the input filename; won't work
- # if double slashes aren't ignored.
+ # If destination is a directory, append the input filename.
if test -d "$dst"; then
- if test -n "$no_target_directory"; then
- echo "$0: $dst_arg: Is a directory" >&2
- exit 1
+ if test "$is_target_a_directory" = never; then
+ echo "$0: $dst_arg: Is a directory" >&2
+ exit 1
fi
dstdir=$dst
- dst=$dstdir/`basename "$src"`
+ dstbase=`basename "$src"`
+ case $dst in
+ */) dst=$dst$dstbase;;
+ *) dst=$dst/$dstbase;;
+ esac
dstdir_status=0
else
- # Prefer dirname, but fall back on a substitute if dirname fails.
- dstdir=`
- (dirname "$dst") 2>/dev/null ||
- expr X"$dst" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
- X"$dst" : 'X\(//\)[^/]' \| \
- X"$dst" : 'X\(//\)$' \| \
- X"$dst" : 'X\(/\)' \| . 2>/dev/null ||
- echo X"$dst" |
- sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
- s//\1/
- q
- }
- /^X\(\/\/\)[^/].*/{
- s//\1/
- q
- }
- /^X\(\/\/\)$/{
- s//\1/
- q
- }
- /^X\(\/\).*/{
- s//\1/
- q
- }
- s/.*/./; q'
- `
-
+ dstdir=`dirname "$dst"`
test -d "$dstdir"
dstdir_status=$?
fi
fi
+ case $dstdir in
+ */) dstdirslash=$dstdir;;
+ *) dstdirslash=$dstdir/;;
+ esac
+
obsolete_mkdir_used=false
if test $dstdir_status != 0; then
case $posix_mkdir in
'')
- # Create intermediate dirs using mode 755 as modified by the umask.
- # This is like FreeBSD 'install' as of 1997-10-28.
- umask=`umask`
- case $stripcmd.$umask in
- # Optimize common cases.
- *[2367][2367]) mkdir_umask=$umask;;
- .*0[02][02] | .[02][02] | .[02]) mkdir_umask=22;;
+ # With -d, create the new directory with the user-specified mode.
+ # Otherwise, rely on $mkdir_umask.
+ if test -n "$dir_arg"; then
+ mkdir_mode=-m$mode
+ else
+ mkdir_mode=
+ fi
- *[0-7])
- mkdir_umask=`expr $umask + 22 \
- - $umask % 100 % 40 + $umask % 20 \
- - $umask % 10 % 4 + $umask % 2
- `;;
- *) mkdir_umask=$umask,go-w;;
- esac
+ posix_mkdir=false
+ # The $RANDOM variable is not portable (e.g., dash). Use it
+ # here however when possible just to lower collision chance.
+ tmpdir=${TMPDIR-/tmp}/ins$RANDOM-$$
- # With -d, create the new directory with the user-specified mode.
- # Otherwise, rely on $mkdir_umask.
- if test -n "$dir_arg"; then
- mkdir_mode=-m$mode
+ trap '
+ ret=$?
+ rmdir "$tmpdir/a/b" "$tmpdir/a" "$tmpdir" 2>/dev/null
+ exit $ret
+ ' 0
+
+ # Because "mkdir -p" follows existing symlinks and we likely work
+ # directly in world-writeable /tmp, make sure that the '$tmpdir'
+ # directory is successfully created first before we actually test
+ # 'mkdir -p'.
+ if (umask $mkdir_umask &&
+ $mkdirprog $mkdir_mode "$tmpdir" &&
+ exec $mkdirprog $mkdir_mode -p -- "$tmpdir/a/b") >/dev/null 2>&1
+ then
+ if test -z "$dir_arg" || {
+ # Check for POSIX incompatibilities with -m.
+ # HP-UX 11.23 and IRIX 6.5 mkdir -m -p sets group- or
+ # other-writable bit of parent directory when it shouldn't.
+ # FreeBSD 6.1 mkdir -m -p sets mode of existing directory.
+ test_tmpdir="$tmpdir/a"
+ ls_ld_tmpdir=`ls -ld "$test_tmpdir"`
+ case $ls_ld_tmpdir in
+ d????-?r-*) different_mode=700;;
+ d????-?--*) different_mode=755;;
+ *) false;;
+ esac &&
+ $mkdirprog -m$different_mode -p -- "$test_tmpdir" && {
+ ls_ld_tmpdir_1=`ls -ld "$test_tmpdir"`
+ test "$ls_ld_tmpdir" = "$ls_ld_tmpdir_1"
+ }
+ }
+ then posix_mkdir=:
+ fi
+ rmdir "$tmpdir/a/b" "$tmpdir/a" "$tmpdir"
else
- mkdir_mode=
+ # Remove any dirs left behind by ancient mkdir implementations.
+ rmdir ./$mkdir_mode ./-p ./-- "$tmpdir" 2>/dev/null
fi
-
- posix_mkdir=false
- case $umask in
- *[123567][0-7][0-7])
- # POSIX mkdir -p sets u+wx bits regardless of umask, which
- # is incompatible with FreeBSD 'install' when (umask & 300) != 0.
- ;;
- *)
- tmpdir=${TMPDIR-/tmp}/ins$RANDOM-$$
- trap 'ret=$?; rmdir "$tmpdir/d" "$tmpdir" 2>/dev/null; exit $ret' 0
-
- if (umask $mkdir_umask &&
- exec $mkdirprog $mkdir_mode -p -- "$tmpdir/d") >/dev/null 2>&1
- then
- if test -z "$dir_arg" || {
- # Check for POSIX incompatibilities with -m.
- # HP-UX 11.23 and IRIX 6.5 mkdir -m -p sets group- or
- # other-writeable bit of parent directory when it shouldn't.
- # FreeBSD 6.1 mkdir -m -p sets mode of existing directory.
- ls_ld_tmpdir=`ls -ld "$tmpdir"`
- case $ls_ld_tmpdir in
- d????-?r-*) different_mode=700;;
- d????-?--*) different_mode=755;;
- *) false;;
- esac &&
- $mkdirprog -m$different_mode -p -- "$tmpdir" && {
- ls_ld_tmpdir_1=`ls -ld "$tmpdir"`
- test "$ls_ld_tmpdir" = "$ls_ld_tmpdir_1"
- }
- }
- then posix_mkdir=:
- fi
- rmdir "$tmpdir/d" "$tmpdir"
- else
- # Remove any dirs left behind by ancient mkdir implementations.
- rmdir ./$mkdir_mode ./-p ./-- 2>/dev/null
- fi
- trap '' 0;;
- esac;;
+ trap '' 0;;
esac
if
$posix_mkdir && (
- umask $mkdir_umask &&
- $doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir"
+ umask $mkdir_umask &&
+ $doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir"
)
then :
else
- # The umask is ridiculous, or mkdir does not conform to POSIX,
+ # mkdir does not conform to POSIX,
# or it failed possibly due to a race condition. Create the
# directory the slow way, step by step, checking for races as we go.
case $dstdir in
- /*) prefix='/';;
- -*) prefix='./';;
- *) prefix='';;
+ /*) prefix='/';;
+ [-=\(\)!]*) prefix='./';;
+ *) prefix='';;
esac
- eval "$initialize_posix_glob"
-
oIFS=$IFS
IFS=/
- $posix_glob set -f
+ set -f
set fnord $dstdir
shift
- $posix_glob set +f
+ set +f
IFS=$oIFS
prefixes=
@@ -403,34 +389,34 @@
for d
do
- test -z "$d" && continue
+ test X"$d" = X && continue
- prefix=$prefix$d
- if test -d "$prefix"; then
- prefixes=
- else
- if $posix_mkdir; then
- (umask=$mkdir_umask &&
- $doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir") && break
- # Don't fail if two instances are running concurrently.
- test -d "$prefix" || exit 1
- else
- case $prefix in
- *\'*) qprefix=`echo "$prefix" | sed "s/'/'\\\\\\\\''/g"`;;
- *) qprefix=$prefix;;
- esac
- prefixes="$prefixes '$qprefix'"
- fi
- fi
- prefix=$prefix/
+ prefix=$prefix$d
+ if test -d "$prefix"; then
+ prefixes=
+ else
+ if $posix_mkdir; then
+ (umask $mkdir_umask &&
+ $doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir") && break
+ # Don't fail if two instances are running concurrently.
+ test -d "$prefix" || exit 1
+ else
+ case $prefix in
+ *\'*) qprefix=`echo "$prefix" | sed "s/'/'\\\\\\\\''/g"`;;
+ *) qprefix=$prefix;;
+ esac
+ prefixes="$prefixes '$qprefix'"
+ fi
+ fi
+ prefix=$prefix/
done
if test -n "$prefixes"; then
- # Don't fail if two instances are running concurrently.
- (umask $mkdir_umask &&
- eval "\$doit_exec \$mkdirprog $prefixes") ||
- test -d "$dstdir" || exit 1
- obsolete_mkdir_used=true
+ # Don't fail if two instances are running concurrently.
+ (umask $mkdir_umask &&
+ eval "\$doit_exec \$mkdirprog $prefixes") ||
+ test -d "$dstdir" || exit 1
+ obsolete_mkdir_used=true
fi
fi
fi
@@ -443,14 +429,25 @@
else
# Make a couple of temp file names in the proper directory.
- dsttmp=$dstdir/_inst.$$_
- rmtmp=$dstdir/_rm.$$_
+ dsttmp=${dstdirslash}_inst.$$_
+ rmtmp=${dstdirslash}_rm.$$_
# Trap to clean up those temp files at exit.
trap 'ret=$?; rm -f "$dsttmp" "$rmtmp" && exit $ret' 0
# Copy the file name to the temp name.
- (umask $cp_umask && $doit_exec $cpprog "$src" "$dsttmp") &&
+ (umask $cp_umask &&
+ { test -z "$stripcmd" || {
+ # Create $dsttmp read-write so that cp doesn't create it read-only,
+ # which would cause strip to fail.
+ if test -z "$doit"; then
+ : >"$dsttmp" # No need to fork-exec 'touch'.
+ else
+ $doit touch "$dsttmp"
+ fi
+ }
+ } &&
+ $doit_exec $cpprog "$src" "$dsttmp") &&
# and set any options; do chmod last to preserve setuid bits.
#
@@ -465,66 +462,6 @@
# If -C, don't bother to copy if it wouldn't change the file.
if $copy_on_change &&
- old=`LC_ALL=C ls -dlL "$dst" 2>/dev/null` &&
- new=`LC_ALL=C ls -dlL "$dsttmp" 2>/dev/null` &&
-
- eval "$initialize_posix_glob" &&
- $posix_glob set -f &&
- set X $old && old=:$2:$4:$5:$6 &&
- set X $new && new=:$2:$4:$5:$6 &&
- $posix_glob set +f &&
-
- test "$old" = "$new" &&
- $cmpprog "$dst" "$dsttmp" >/dev/null 2>&1
- then
- rm -f "$dsttmp"
- else
- # Rename the file to the real destination.
- $doit $mvcmd -f "$dsttmp" "$dst" 2>/dev/null ||
-
- # The rename failed, perhaps because mv can't rename something else
- # to itself, or perhaps because mv is so ancient that it does not
- # support -f.
- {
- # Now remove or move aside any old file at destination location.
- # We try this two ways since rm can't unlink itself on some
- # systems and the destination file might be busy for other
- # reasons. In this case, the final cleanup might fail but the new
- # file should still install successfully.
- {
- test ! -f "$dst" ||
- $doit $rmcmd -f "$dst" 2>/dev/null ||
- { $doit $mvcmd -f "$dst" "$rmtmp" 2>/dev/null &&
- { $doit $rmcmd -f "$rmtmp" 2>/dev/null; :; }
- } ||
- { echo "$0: cannot unlink or rename $dst" >&2
- (exit 1); exit 1
- }
- } &&
-
- # Now rename the file to the real destination.
- $doit $mvcmd "$dsttmp" "$dst"
- }
- fi || exit 1
-
- trap '' 0
- fi
-done
-
-# Local variables:
-# eval: (add-hook 'write-file-hooks 'time-stamp)
-# time-stamp-start: "scriptversion="
-# time-stamp-format: "%:y-%02m-%02d.%02H"
-# time-stamp-time-zone: "UTC"
-# time-stamp-end: "; # UTC"
-# End:
-est -z "$chowncmd" || $doit $chowncmd "$dsttmp"; } &&
- { test -z "$chgrpcmd" || $doit $chgrpcmd "$dsttmp"; } &&
- { test -z "$stripcmd" || $doit $stripcmd "$dsttmp"; } &&
- { test -z "$chmodcmd" || $doit $chmodcmd $mode "$dsttmp"; } &&
-
- # If -C, don't bother to copy if it wouldn't change the file.
- if $copy_on_change &&
old=`LC_ALL=C ls -dlL "$dst" 2>/dev/null` &&
new=`LC_ALL=C ls -dlL "$dsttmp" 2>/dev/null` &&
set -f &&
Modified: trunk/Build/source/utils/autosp/autosp-src/install-sh
===================================================================
(Binary files differ)
Modified: trunk/Master/doc.html
===================================================================
--- trunk/Master/doc.html 2020-07-27 23:47:27 UTC (rev 55971)
+++ trunk/Master/doc.html 2020-07-27 23:53:24 UTC (rev 55972)
@@ -12791,7 +12791,7 @@
<li id="librebaskerville"><b><a href="texmf-dist/doc/fonts/librebaskerville/">librebaskerville</a></b><small>
(<a href="https://ctan.org/pkg/librebaskerville">CTAN</a>):
-The Libre Baskerville family of fonts with support for XeLaTeX or LuaLaTeX.
+The Libre Baskerville family of fonts with LaTeX support.
<a href="texmf-dist/doc/fonts/librebaskerville/librebaskerville-samples.pdf">librebaskerville-samples.pdf</a>.
</small></li>
@@ -24703,5 +24703,5 @@
<p><a href="#letter-1">1</a> - <a href="#letter-2">2</a> - <a href="#letter-A">A</a> - <a href="#letter-B">B</a> - <a href="#letter-C">C</a> - <a href="#letter-D">D</a> - <a href="#letter-E">E</a> - <a href="#letter-F">F</a> - <a href="#letter-G">G</a> - <a href="#letter-H">H</a> - <a href="#letter-I">I</a> - <a href="#letter-J">J</a> - <a href="#letter-K">K</a> - <a href="#letter-L">L</a> - <a href="#letter-M">M</a> - <a href="#letter-N">N</a> - <a href="#letter-O">O</a> - <a href="#letter-P">P</a> - <a href="#letter-Q">Q</a> - <a href="#letter-R">R</a> - <a href="#letter-S">S</a> - <a href="#letter-T">T</a> - <a href="#letter-U">U</a> - <a href="#letter-V">V</a> - <a href="#letter-W">W</a> - <a href="#letter-X">X</a> - <a href="#letter-Y">Y</a> - <a href="#letter-Z">Z</a></p>
<hr>
-<small>Generated Mon Jul 27 01:53:26 CEST 2020 by tl-update-docindex.</small>
+<small>Generated Tue Jul 28 01:53:22 CEST 2020 by tl-update-docindex.</small>
</body></html>
More information about the tex-live-commits
mailing list.