texlive[54752] Master/texmf-dist: asmeconf (15apr20)
commits+karl at tug.org
commits+karl at tug.org
Wed Apr 15 23:33:36 CEST 2020
Revision: 54752
http://tug.org/svn/texlive?view=revision&revision=54752
Author: karl
Date: 2020-04-15 23:33:36 +0200 (Wed, 15 Apr 2020)
Log Message:
-----------
asmeconf (15apr20)
Modified Paths:
--------------
trunk/Master/texmf-dist/bibtex/bst/asmeconf/asmeconf.bst
trunk/Master/texmf-dist/doc/latex/asmeconf/README.md
trunk/Master/texmf-dist/doc/latex/asmeconf/asmeconf-sample.bib
trunk/Master/texmf-dist/doc/latex/asmeconf/asmeconf-template.pdf
trunk/Master/texmf-dist/doc/latex/asmeconf/asmeconf-template.tex
trunk/Master/texmf-dist/tex/latex/asmeconf/asmeconf.cls
Modified: trunk/Master/texmf-dist/bibtex/bst/asmeconf/asmeconf.bst
===================================================================
--- trunk/Master/texmf-dist/bibtex/bst/asmeconf/asmeconf.bst 2020-04-15 21:33:21 UTC (rev 54751)
+++ trunk/Master/texmf-dist/bibtex/bst/asmeconf/asmeconf.bst 2020-04-15 21:33:36 UTC (rev 54752)
@@ -1,10 +1,10 @@
%%%%%
%%%%% *** This .bst produces the reference format for ASME conference papers. ***
-%%%%% *** Follows the examples given on ASME's conference web pages in early 2019. ***
+%%%%% *** Follows the examples given on ASME's conference web pages in early 2020. ***
%%%%% *** https://www.asme.org/shop/proceedings/conference-publications/references ***
-%%%%% *** The examples given by ASME do not cover all possibilities ***
+%%%%% *** The examples given by ASME do *not* cover all possibilities ***
%%%%%
-%%%%% This file is version 1.1 dated 2019/07/07
+%%%%% This file is version 1.11 dated 2020/04/14
%%%%%
%%%%% Author: John H. Lienhard V
%%%%% Department of Mechanical Engineering
@@ -26,6 +26,22 @@
%%%%% Added: urlprefix = {}, format.web.urldate, bbl.urldate; urltype field changes "accessed" to something else.
%%%%% Added: venue and eventdate to @inproceedings
%%%%%
+%%%%% Edits in version 1.11, 2020/04/14:
+%%%%% correct error in journal eid code.
+%%%%% remove comma between Vol. and No. in article, per ASME style
+%%%%% capitalize "Thesis", per ASME style
+%%%%% insert "." after techreport number, per ASME style
+%%%%% edits to @inbook, @proceedings, @incollection related to chapter and series.
+%%%%% make punctuation after "(ed.)" consistent across entries.
+%%%%% adjust block breaks in @online.
+%%%%% allow for venue and eventdate in @proceedings
+%%%%% add macros for ASME journal titles. add hdl as an equivalent to hndl archive macro.
+%%%%% add numpages functionality for eid: "eid (numpages pages)"
+%%%%% remove "doi" field from @online (since doi is a digital object identifier, not a web page).
+%%%%% add "urldate" to eprint format, for optional use.
+%%%%% warn in @online not to use both eprint and url, and warn if neither is given.
+%%%%% remove series and add volume to @inproceedings.
+%%%%%
%%%%% Feel free to edit this file to suit your own needs, but please make note of changes in this header.
%%%%%
%%=========================================================
@@ -32,7 +48,7 @@
%% LICENSE:
%% This file is a derivative work from the generated file, as envisioned by the LaTeX Project Public License.
%%
-%% Copyright (c) 2019 John Lienhard
+%% Copyright (c) 2020 John Lienhard
%%
%% Permission is hereby granted, free of charge, to any person obtaining a copy of this software and
%% associated documentation files (the "Software"), to deal in the Software without restriction,
@@ -319,6 +335,9 @@
FUNCTION {bbl.in}
{ "in" }
+FUNCTION {bbl.paperno}
+{ "" }
+
FUNCTION {bbl.pages}
{ "pp." }
@@ -335,10 +354,10 @@
{ "Technical Report" }
FUNCTION {bbl.mthesis}
-{ "Master's thesis" }
+{ "Master's Thesis" }
FUNCTION {bbl.phdthesis}
-{ "Ph.D. thesis" }
+{ "Ph.D. Thesis" }
FUNCTION {bbl.first}
{ "1st" }
@@ -368,7 +387,7 @@
{ "th" }
FUNCTION {bbl.urldate}
- { "accessed" }
+ { "Accessed" }
MACRO {jan} {"Jan."}
@@ -420,13 +439,75 @@
MACRO {googlebooks} {"http://books.google.com/books?id="}
+MACRO {hdl} {"http://hdl.handle.net/"}
MACRO {hndl} {"http://hdl.handle.net/"}
MACRO {jstor} {"http://www.jstor.org/stable/"}
+MACRO {oclc} {"http://www.worldcat.org/oclc/"}
+
MACRO {pubmed} {"http://www.ncbi.nlm.nih.gov/pubmed/"}
+MACRO {amr} {"Appl. Mech. Rev."}
+
+MACRO {lds} {"ASME Letters Dynamic Systems"}
+
+MACRO {jru} {"ASME J. Risk Uncertainty"}
+
+MACRO {jsbc} {"ASME J. Sustainable Bldg. and Cities"}
+
+MACRO {jam} {"ASME J. Appl. Mech."}
+
+MACRO {jbe} {"ASME J. Biomed. Eng."}
+
+MACRO {jcnd} {"ASME J. Comput. Nonlin. Dyn."}
+
+MACRO {jcise} {"ASME J. Comput. Inf. Sci. Eng."}
+
+MACRO {jds} {"J. Dyn. Syst.-T. ASME"}
+
+MACRO {jep} {"ASME J. Electron. Packag."}
+
+MACRO {jert} {"ASME J. Energy Resour."}
+
+MACRO {jegtp} {"ASME J. Eng. Gas Turbines Power"}
+
+MACRO {jem} {"ASME J. Eng. Mater."}
+
+MACRO {jfe} {"ASME J. Fluids Eng."}
+
+MACRO {jfcst} {"ASME J. Fuel Cell Sci. Tech."}
+
+MACRO {jht} {"ASME J. Heat Transfer"}
+
+MACRO {jmse} {"ASME J. Manuf. Sci. E."}
+
+MACRO {jmd} {"ASME J. Mech. Des."}
+
+MACRO {jmr} {"ASME J. Mech. Robot."}
+
+MACRO {jmdv} {"ASME J. Med. Devices"}
+
+MACRO {jmnm} {"ASME J. Micro Nano-Manuf."}
+
+MACRO {jnem} {"ASME J. Nanotech Eng. Med."}
+
+MACRO {joma} {"ASME J. Offshore Mech. Arct."}
+
+MACRO {jpv} {"ASME J. Press. Vess."}
+
+MACRO {jse} {"ASME J. Sol. Energy"}
+
+MACRO {jtsea} {"ASME J. Therm. Sci. Eng. Appl."}
+
+MACRO {jtb} {"ASME J. Tribol."}
+
+MACRO {jtm} {"ASME J. Turbomach."}
+
+MACRO {jva} {"ASME J. Vib. Acoust."}
+
+
MACRO {acmcs} {"ACM Computing Surveys"}
MACRO {acta} {"Acta Informatica"}
@@ -504,21 +585,6 @@
if$
}
-
-FUNCTION {format.eprint}
-{ eprint duplicate$ empty$
- 'skip$
- { "\eprint"
- archive empty$
- { "there's an eprint but no archive in " cite$ * warning$ }
- { "[" * archive * "]" * }
- if$
- "{" * swap$ * "}" *
- }
- if$
-}
-
-
FUNCTION {format.web.urldate}
{ urldate empty$
{""}
@@ -537,6 +603,20 @@
if$
}
+FUNCTION {format.eprint}
+{ eprint duplicate$ empty$
+ 'skip$
+ { "\eprint"
+ archive empty$
+ { "there's an eprint but no archive in " cite$ * warning$ }
+ { "[" * archive * "]" * }
+ if$
+ "{" * swap$ * "}" *
+ format.web.urldate swap$ *
+ }
+ if$
+}
+
FUNCTION {format.url}
{
url
@@ -616,7 +696,6 @@
FUNCTION {format.editors}
{ editor "editor" format.names duplicate$ empty$ 'skip$
{
- "," *
" " *
get.bbl.editor
"(" swap$ * ")" *
@@ -788,6 +867,20 @@
}
if$
}
+
+FUNCTION {format.paper.number}
+{ number "number" bibinfo.check
+ type duplicate$ empty$
+ { pop$ bbl.paperno }
+ 'skip$
+ if$
+ "type" bibinfo.check
+ swap$ duplicate$ empty$
+ { pop$ "t" change.case$ }
+ { tie.or.space.prefix * * }
+ if$
+}
+
FUNCTION {format.number.series}
{ volume empty$
{ number empty$
@@ -800,7 +893,7 @@
if$
number tie.or.space.prefix "number" bibinfo.check * *
bbl.in space.word *
- series "series" bibinfo.check *
+ series emphasize "series" bibinfo.check *
}
if$
}
@@ -939,19 +1032,21 @@
{ eid "eid" bibinfo.check
duplicate$ empty$ 'pop$
{ swap$ duplicate$ empty$ 'skip$
- {
+ {
" " *
- }
- if$
- swap$ *
- numpages empty$ 'skip$
- { bbl.eidpp numpages tie.or.space.prefix
- "numpages" bibinfo.check * *
- " (" swap$ * ")" * *
+ format.year * ": " *
+ swap$
+ *
+ numpages empty$ 'skip$
+ { numpages bbl.eidpp tie.or.space.prefix
+ "numpages" bibinfo.check * *
+ " (" swap$ * ")" * *
+ }
+ if$
}
if$
- }
- if$
+ }
+ if$
}
FUNCTION {format.vol.num.pages}
{ volume field.or.null
@@ -969,7 +1064,7 @@
'skip$
if$
swap$
- ", " bbl.nr * number tie.or.space.prefix pop$ * swap$ *
+ " " bbl.nr * number tie.or.space.prefix pop$ * swap$ *
}
if$ *
}
@@ -976,7 +1071,7 @@
FUNCTION {format.chapter.pages}
{ chapter empty$
- { "" }
+ 'format.pages
{ type empty$
{ bbl.chapter }
{ type "l" change.case$
@@ -985,6 +1080,10 @@
if$
chapter tie.or.space.prefix
"chapter" bibinfo.check
+ pages empty$
+ 'skip$
+ { ", " * format.pages * }
+ if$
* *
}
if$
@@ -1003,7 +1102,7 @@
"" *
" " *
get.bbl.editor
- "(" swap$ * ") " *
+ "(" swap$ * "). " *
* swap$
* }
if$
@@ -1193,7 +1292,6 @@
{ output.bibitem
author empty$
{ format.editors "author and editor" output.check
- add.blank
}
{ format.authors output.nonnull
crossref missing$
@@ -1227,6 +1325,7 @@
format.note output
fin.entry
}
+
FUNCTION {booklet}
{ output.bibitem
format.authors output
@@ -1263,15 +1362,15 @@
new.block
crossref missing$
{
+ format.bvolume output
format.number.series output
+ new.block
+ new.sentence
format.publisher.address output
- format.bvolume output
- format.chapter.pages "chapter and pages" output.check
new.block
new.sentence
}
{
- format.chapter.pages "chapter and pages" output.check
new.block
format.book.crossref output.nonnull
}
@@ -1278,7 +1377,8 @@
if$
format.date "year" output.check
date.block
- format.pages "pages" output.check
+ format.chapter.pages "chapter and pages" output.check
+ new.block
format.doi output
new.block
format.eprint output
@@ -1297,9 +1397,9 @@
crossref missing$
{ format.in.ed.booktitle "booktitle" output.check
format.edition output
+ new.block
format.number.series output
format.bvolume output
- format.chapter.pages output
new.sentence
format.publisher.address output
}
@@ -1309,7 +1409,7 @@
if$
format.date "year" output.check
conf.date.block
- format.pages "pages" output.check
+ format.chapter.pages "pages" output.check
format.doi output
new.block
format.eprint output
@@ -1327,8 +1427,13 @@
new.block
crossref missing$
{ format.in.ed.booktitle "booktitle" output.check
+ volume empty$ 'skip$
+ { bbl.volume volume tie.or.space.prefix
+ "volume" bibinfo.check * * output
+ }
+ if$
new.sentence
- format.number.series output
+ format.paper.number output
conf.date.block
format.pages "pages" output.check
new.sentence
@@ -1355,6 +1460,7 @@
fin.entry
}
FUNCTION {conference} { inproceedings }
+
FUNCTION {manual}
{ output.bibitem
author empty$
@@ -1435,6 +1541,46 @@
empty.misc.check
}
+FUNCTION {online}
+{ output.bibitem
+ author empty$
+ { format.editors "author and editor" output.check
+ }
+ { format.authors output.nonnull
+ crossref missing$
+ { "author and editor" editor either.or.check }
+ 'skip$
+ if$
+ }
+ if$
+ new.block
+ format.title
+ "title" output.check
+ new.block
+ organization "organization" bibinfo.warn output
+ address "address" bibinfo.check output
+ format.date "year" output.check
+ new.block
+ url empty$
+ { eprint empty$
+ { "missing url and eprint in" cite$ * warning$ }
+ { format.eprint output }
+ if$
+ }
+ { "url and eprint" eprint either.or.check
+ format.url "url" bibinfo.warn output
+ }
+ if$
+ new.block
+ format.note output
+ fin.entry
+}
+
+FUNCTION {electronic} { online }
+
+FUNCTION {www} { online }
+
+
FUNCTION {phdthesis}
{ output.bibitem
format.authors "author" output.check
@@ -1461,11 +1607,16 @@
editor empty$
{ organization "organization" bibinfo.check output
}
- { format.editors output.nonnull }
+ { format.editors output.nonnull
+ }
if$
new.block
format.btitle "title" output.check
format.bvolume output
+ new.block
+ venue "venue" output.check
+ eventdate "eventdate" output.check
+ new.block
editor empty$
{ publisher empty$
{ format.number.series output }
@@ -1490,7 +1641,7 @@
if$
}
if$
- format.date "year" output.check
+ format.date "year" output.check
format.doi output
new.block
format.eprint output
@@ -1508,6 +1659,7 @@
"title" output.check
new.block
format.tr.number output.nonnull
+ new.block
institution "institution" bibinfo.warn output
address "address" bibinfo.check output
new.block
@@ -1521,35 +1673,6 @@
fin.entry
}
-FUNCTION {online}
-{ output.bibitem
- author empty$
- { format.editors "author and editor" output.check
- }
- { format.authors output.nonnull
- crossref missing$
- { "author and editor" editor either.or.check }
- 'skip$
- if$
- }
- if$
- format.title
- "title" output.check
- new.block
- organization "organization" bibinfo.warn output
- address "address" bibinfo.check output
- format.date "year" output.check
- format.doi output
- format.note output
- format.eprint output
- format.url "url" bibinfo.warn output
- fin.entry
-}
-
-FUNCTION {electronic} { online }
-
-FUNCTION {www} { online }
-
FUNCTION {unpublished}
{ output.bibitem
format.authors "author" output.check
Modified: trunk/Master/texmf-dist/doc/latex/asmeconf/README.md
===================================================================
--- trunk/Master/texmf-dist/doc/latex/asmeconf/README.md 2020-04-15 21:33:21 UTC (rev 54751)
+++ trunk/Master/texmf-dist/doc/latex/asmeconf/README.md 2020-04-15 21:33:36 UTC (rev 54752)
@@ -1,7 +1,7 @@
#asmeconf: A template for ASME conference papers#
- Version 1.17 dated 2020/02/29.
+ Version 1.18 dated 2020/04/14.
####Overview####
This class provides a template to format ASME Conference papers according to
@@ -37,7 +37,7 @@
- support hyperref package (hyperlinks to figures, tables, references, web)
-- support pdf bookmarks
+- support pdf bookmarks and metadata
- enable various math and text features with newtxmath and newtxtext packages
@@ -67,6 +67,8 @@
####Change log####
+ v1.18 (2020/04/14): edit and expand documentation; revise sample .bib file; extensive edits to asmeconf.bst, to better support hyperlinks, to correct eid error, and for better conformance to ASME style (details listed in .bst file); add foreign language example.
+
v1.17: set T1 font encoding with utf-8 input, ensure LuaLaTeX compatibility; load hologo and metalogo packages; edit documentation.
v1.16: remove xpatch and comment packages from class file; disable \\( and \\) in pdf bookmarks to avoid warnings; edit documentation.
Modified: trunk/Master/texmf-dist/doc/latex/asmeconf/asmeconf-sample.bib
===================================================================
--- trunk/Master/texmf-dist/doc/latex/asmeconf/asmeconf-sample.bib 2020-04-15 21:33:21 UTC (rev 54751)
+++ trunk/Master/texmf-dist/doc/latex/asmeconf/asmeconf-sample.bib 2020-04-15 21:33:36 UTC (rev 54752)
@@ -1,200 +1,179 @@
-%% Revised 2 October 2019
+%% Revised 14 April 2020
+%% John H. Lienhard, MIT
@article{ning2002,
- title = {On the Sliding Friction Characteristics of Unidirectional Continuous FRP Deposits},
- journal = {ASME Journal of Tribology},
- year = {2002},
- volume = {48},
- number = {5},
- pages = {2000--2008},
- author = {Xiang Ning and Mary Rose Lovell},
- doi = {10.1115/1.4042912},
- URL = {https://doi.org/10.1115/1.4042912},
+ author = {Xiang Ning and Mary Rose Lovell},
+ title = {On the Sliding Friction Characteristics of Unidirectional Continuous FRP Deposits},
+ journal = {ASME Journal of Tribology},
+ year = {2002},
+ volume = {48},
+ number = {5},
+ pages = {2000--2008},
+ doi = {10.1115/1.4042912},
}
-%% There's no need to give the URL if it is simply the DOI; the DOI itself will be hyperlinked.
+%% article supports these fields: author, year, title, journal, volume, number, pages OR eid (and numpages),
+%% doi, url, eprint with archive, note.
+%% There's no need to give the URL if it is simply the DOI, since the DOI itself will be hyperlinked.
+%% url = {https://doi.org/10.1115/1.4042912}. ASME requests that a URL point to the abstract.
@BOOK{gibson2008,
- title = {The Big Book of Cellular Studies},
+ title = {The Big Book of Cellular Studies},
publisher = {John Wiley and Sons},
- year = {2008},
- author = {Tom A. Gibson and Matthew A. Tucker},
- address = {New York},
+ year = {2008},
+ author = {Tom A. Gibson and Matthew A. Tucker},
+ address = {New York},
}
-%% If a URL or DOI is available, it may be included as in the article above.
+%% book supports these fields: author OR editor, year, title, edition, series, volume OR number
+%% publisher, address, doi, url, eprint with archive, note.
@INCOLLECTION{stevens1999,
- title = {Stochastic Fields and Their Digital Simulation},
+ author = {Thomas T. Stevens},
+ title = {Stochastic Fields and Their Digital Simulation},
+ booktitle = {Stochastic Methods},
publisher = {Martimius Publishers},
- pages = {22--36},
- year = {1999},
- booktitle = {Stochastic Methods},
- author = {Thomas T. Stevens},
- address = {Dordrecht},
+ address = {Dordrecht},
+ year = {1999},
+ pages = {22--36},
}
-%% If a URL or DOI is available, it may be included as in the article above.
+%% incollection supports these fields: author, year, title, booktitle, edition, editor, series,
+%% volume OR number, publisher, address, type,
+%% chapter, pages, doi, note, eprint with archive, url, urldate.
+%% type = { } changes default "Chap." to something else.
-
@inproceedings{wions2005,
- author = {Thomas Wions and Christopher D. Mills},
- title = {Structural Dynamics in Parallel Manipulation},
+ author = {Thomas Wions and Christopher D. Mills},
+ title = {Struct\-ur\-al Dynamics in Parallel Manipulation},
booktitle = {Proceedings of the ASME IDETC/CIE},
- year = {2005},
- pages = {777--798},
- number = {DETC2005-99532},
- doi = {10.1115/1.4042912},
- URL = {https://doi.org/10.1115/1.4042912},
- venue = {New Orleans, LA},
- confmonth = {September 10--13},
+ number = {DETC2005-99532},
+ venue = {New Orleans, LA},
+ eventdate = {September 10--13},
+ year = {2005},
+ pages = {777--798},
+ doi = {10.1115/1.4042912},
+ url = {https://doi.org/10.1115/1.4042912},
}
-% Note that venue and confmonth are specific to this .bst style
-% There's no need to give the URL if it is simply the DOI; the DOI itself will be hyperlinked.
+%% inproceedings supports these fields: author, year, title, booktitle, edition, editor, volume,
+%% organization OR publisher, address, venue, eventdate,
+%% [paper] number, pages, doi, note, eprint with archive, url, urldate.
+%% Note that venue and eventdate are specific to the asmeconf.bst style.
+%% There's really no need to give the URL if it is simply the DOI because the DOI itself will be hyperlinked.
+%% ASME requests that the URL point to the abstract.
-
@phdthesis{smith2002,
- author = {Robert Smith},
- title = {Conformal Lubricated Contact of Cylindrical Surfaces Involved in a Non-Steady Motion},
- school = {Rochester Institute of Technology},
- address = {Rochester, NY},
- year = {2002},
- doi = {10.1115/1.4042912},
- URL = {https://doi.org/10.1115/1.4042912},
+ author = {Robert Smith},
+ title = {Conformal Lubricated Contact of Cylindrical Surfaces Involved in a Non-Steady Motion},
+ school = {Rochester Institute of Technology},
+ address = {Rochester, NY},
+ year = {2002},
+ doi = {10.1115/1.4042912},
+ url = {https://doi.org/10.1115/1.4042912},
}
-% type = {Sc{D} Thesis}, could be added to change the type of thesis. See example below.
-% There's no need to give the URL if it is simply the DOI; the DOI itself will be hyperlinked.
+% type = {Sc{D} {T}hesis}, could be added to change the type of thesis. See two examples below.
+% There's no need to give the URL if it is simply the DOI; the DOI itself will be hyperlinked.
+% eprint with archive is also supported.
+%% ASME requests that the URL point to the abstract.
-
- at techreport{watson1982,
- author = {David Watson},
- title = {Evaporative Heat Transfer in the Contact Line of a Mixture},
- year = {1982},
- number = {HTL-26, CFD-4},
- institution = {Iowa State University},
- address = {Ames, IA},
- doi = {10.1115/1.4042912},
- URL = {https://doi.org/10.1115/1.4042912},
-}
-% type can be changed here also, see example below
-% see example below.
-
@mastersthesis{smith1998,
- author = {Robert Smith},
- title = {Conformal Lubricated Contact of Cylindrical Surfaces Involved in a Steady Motion},
- school = {Rochester Institute of Technology},
- address = {Rochester, NY},
- year = {1998},
+ author = {Robert Smith},
+ title = {Conformal Lubricated Contact of Cylindrical Surfaces Involved in a Steady Motion},
+ school = {Rochester Institute of Technology},
+ address = {Rochester, NY},
+ year = {1998},
}
+%% mastersthesis supports these fields: author, year, title, type, school, address, note.
+%% These fields are also supported, but don't use them all: doi, eprint with archive, url, urldate, urltype
+%% type={} can optionally be used to change the type of thesis. Default is "Master's thesis"
@mastersthesis{smith1996,
-author = {Robert Smith},
-title = {Cylindrical Surfaces Involved in a Steady Motion},
-type = {{BS} Thesis},
-school = {Rochester Institute of Technology},
-address = {Rochester, NY},
-year = {1996},
+ author = {Robert Smith},
+ title = {Cylindrical Surfaces Involved in a Steady Motion},
+ type = {{BS} {T}hesis},
+ school = {Rochester Institute of Technology},
+ address = {Rochester, NY},
+ year = {1996},
}
+%% To get a bachelor's thesis, use type = {} as above.
-
- at techreport{watson1981,
-author = {David Watson},
-title = {Evaporative Heat Transfer in the Contact Line of a Mixture},
-year = {1981},
-number = {TN-1234},
-institution = {National Aeronautics and Space Administration},
-address = {Washington, DC},
-URL = {https://doi.org/10.1115/1.4042912},
-type = {NASA Technical Memorandum No.}
+ at techreport{watson1982,
+ author = {David Watson},
+ title = {Evaporative Heat Transfer in the Contact Line of a Mixture},
+ institution = {Iowa State University},
+ address = {Ames, IA},
+ number = {HTL-26, CFD-4},
+ year = {1982},
+ doi = {10.1115/1.4042912},
+ url = {https://doi.org/10.1115/1.4042912},
}
+%% techreport supports the fields: author, title, number, institution, address, year, doi, url,
+%% eprint with archive, note.
+% if type = is omitted, it will default to "Tech. Rep." See the example below for changing this.
- at BOOK{bejan,
- title = {Advanced Engineering Thermodynamics},
- publisher = {John Wiley {\&} Sons, Inc.},
- year = {1988},
- author = {Adrian Bejan},
- address = {New York, NY},
+ at techreport{reynolds58,
+ author = {W. C. Reynolds and W. M. Kays and S. J. Kline},
+ title = {Heat Transfer in the Incompressible Turbulent Boundary Layer. {I}--{C}onstant Wall Temperature},
+ type = {Memorandum},
+ institution = {NASA},
+ address = {Washington, DC},
+ number = {12-1-58W},
+ year = {1958},
+ eprint = {2060/19980228020},
+ archive = hdl,
}
+% if type = is omitted, it will default to "Tech. Rep."
@incollection{DKE70,
- author = {Donald K. Edwards},
- title = {Thermal Radiation Measurements},
- editor = {Ernst R. G. Eckert and Richard J. Goldstein},
- booktitle = {Measurement Techniques in Heat Transfer},
- chapter = {9},
- pages = {353--396},
- volume ={130},
- series ={{AGARD}ograph},
- month = {November},
- type = {{C}hapter},
- publisher = {Technivision Services},
- address = {Slough, England},
- year ={1970},
- note ={Published by the Advisory Group for Aerospace Research and Development of {NATO}},
+ author = {Donald K. Edwards},
+ title = {Thermal Radiation Measurements},
+ editor = {Ernst R. G. Eckert and Richard J. Goldstein},
+ booktitle = {Measurement Techniques in Heat Transfer},
+ chapter = {9},
+ pages = {353--396},
+ volume = {130},
+ series = {{AGARD}ograph},
+ publisher = {Technivision Services},
+ address = {Slough, England},
+ year = {1970},
+ note = {Published by the Advisory Group for Aerospace Research and Development of {NATO}},
}
+%% If you need to change "Chap." to something else, use for example: type = {{C}hapter},
+%% It's uncommon to have the "series" field as above.
- at incollection{Lienhard2017,
- author = {John H. Lienhard and Karan H. Mistry and Mostafa H. Sharqawy and Gregory P. Thiel},
- title ={Thermodynamics, Exergy, and Energy Efficiency in Desalination Systems},
- editor = {Hassan A. Arafat},
- booktitle = {Desalination Sustainability},
- chapter = 4,
- pages = {127--206},
- publisher ={Elsevier Publishing Co.},
- address = {Amsterdam},
- year =2017,
- month = {June},
- url = {https://www.elsevier.com/books/desalination-sustainability/unknown/978-0-12-809791-5},
-}
-
@article{Lienhard2019b,
- title = "Exterior Shape Factors from Interior Shape Factors",
- journal = {J. Heat Transfer},
- year = "2019",
- doi = "10.1115/1.4042912",
- author = {Lienhard, V, John H.},
- eid = {061301},
- volume = {141},
- number = {6},
+ author = {Lienhard, V, John H.},
+ title = {Exterior Shape Factors from Interior Shape Factors},
+ journal = jht,
+ doi = {10.1115/1.4042912},
+ volume = {141},
+ number = {6},
+ eid = {061301},
+ year = {2019},
}
+%% Note eid field rather than page numbers. Will not produce "pp." before the eid number.
+%% May include numpages = {} to get "eid (numpages pages)"
+%% Note use of jht macro for title title (produces "ASME J. Heat Transfer"). All ASME journals have macros.
- at misc{narayan2017,
- author = {Prakash Narayan Govindan and Steven Lam and Maximus G. {St. John}},
- title = {Systems including a condensing apparatus such as a bubble column condenser},
- year = {2017},
+ at misc{govindan2017,
+ author = {Prakash Narayan Govindan and Steven Lam and Maximus G. {St. John}},
+ title = {Systems Including a Condensing Apparatus Such As a Bubble Column Condenser},
howpublished = {US Patent {\#}9700811},
+ year = {2017},
+ url = {https://patents.google.com/patent/US9700811B2},
}
- at conference{Swaminathan2017IDABRO,
- Author = {Swaminathan, Jaichander and Stover, Richard L. and Tow, Emily W. and Warsinger, David M. and Lienhard, John H.},
- Booktitle = {Proceedings of IDA World Congress on Desalination and Water Reuse},
- Title = {Effect of practical losses on optimal design of batch {RO} systems},
- Year = {2017},
- Month = 10,
- Publisher = {International Desalination Association},
- address = {Topsfield, MA},
- venue ={S{\~a}o Paulo, Brazil},
- confmonth = {October 15--20},
- number = {IDA17WC-58334},
- eprint = {1721.1/111971},
- archive = hndl,
-}
-% number = {Paper No.\ IDA17WC-58334}, could be used instead.
-% url = {http://hdl.handle.net/1721.1/111971},
-
@misc{Fong2015,
- title = {Analytical Methods for Squaring the Disc},
- author = {Chamberlain Fong},
+ title = {Analytical Methods for Squaring the Disc},
+ author = {Chamberlain Fong},
howpublished = {{\itshape ArXiv e-prints}},
- eprint = {1509.06344},
- archive=arxiv,
- year = {2015},
- month = {sep},
+ year = {2015},
+ eprint = {1509.06344},
+ archive = arxiv,
}
-% URL = {https://arxiv.org/abs/1509.06344v3},
+% eprint + arxiv produces the same result as: url = {https://arxiv.org/abs/1509.06344v3},
@manual{GSL,
- title = {{GNU} Scientific Library Release 2.4},
- URL = {https://www.gnu.org/software/gsl/},
- author = {Mark Galassi
+ title = {{GNU} Scientific Library Release 2.4},
+ author = {Mark Galassi
and Jim Davies
and James Theiler
and Brian Gough
@@ -203,109 +182,150 @@
and Michael Booth
and Fabrice Rossi
and Rhys Ulerich},
- year = 2017,
- organization = {Free Software Foundation},
- address = {Boston, MA},
- month = {June},
+ organization = {Free Software Foundation},
+ address = {Boston, MA},
+ year = 2017,
+ url = {https://www.gnu.org/software/gsl/},
}
+%% manual supports these fields: author, year, title, edition, organization, address, doi, eprint with archive, urldate, url, note.
@online{mpl,
- title={mpl colormaps},
- author={St{\'e}fan {van der Walt} and Nathaniel Smith},
- URL = {http://bids.github.io/colormap/},
- urldate = {26 August 2018},
- year = 2015,
- organization = {GitHub},
- address = {San Francisco, CA},
- month = {September},
+ title = {mpl colormaps},
+ author = {St{\'e}fan {van der Walt} and Nathaniel Smith},
+ organization = {GitHub},
+ address = {San Francisco, CA},
+ year = 2015,
+ url = {http://bids.github.io/colormap/},
+ urldate = {August 26, 2018},
}
+%% online supports these fields: author OR editor, year, title, organization, address,
+%% note, url OR eprint with archive, urldate, urltype
+%% You can change "Accessed" with "urltype", e.g., urltype = {retrieved},
-
@BOOK{johnson1980,
- title = {Title of edited book},
+ editor = {Howard Johnson},
+ title = {Title of Edited Book},
publisher = {John Wiley and Sons, Inc.},
- year = {1980},
- editor = {Howard Johnson},
- address = {New York, NY},
+ address = {New York, NY},
+ year = {1980},
}
@proceedings{proceedings,
- title = {The title of the proceedings},
- year = 2015,
- editor = {Howard Johnson},
- volume = 2,
- address = {Address of publisher},
- organization = {The organization},
- publisher = {Name of publisher},
- note = {Optional note}
+ title = {The Title of the Proceedings},
+ year = 2015,
+ editor = {Al Yankovich and Howard Stern},
+ volume = {15},
+ organization = {Organization},
+ venue = {Boston, MA},
+ eventdate = {April 27--28},
+ url = {http://web.mit.edu},
+ note = {Optional note},
}
-% series = {Series A,
+%% proceedings supports these fields: author OR editor, year, title, edition, editor,
+%% series, volume OR number, organization, publisher,
+%% address [of organization or publisher], venue, eventdate,
+%% doi, url, eprint with archive.
+%% The organization will appear as author/editor if those fields are empty.
+%% In most instances, the publisher is the organization so only one should be given
@online{amsmath,
-author = {{American Mathematical Society} and {LATEX3 Project}},
-title = {User's Guide for the \textsf{amsmath} Package, Version 2.1},
-year = {2018},
-organization = {Comprehensive \TeX\ Archive Network},
-url = {https://ctan.org/tex-archive/macros/latex/required/amsmath/amsldoc.pdf},
-urldate = {5 July 2019},
+ author = {{American Mathematical Society} and {LATEX3 Project}},
+ title = {User's Guide for the \textsf{amsmath} Package, Version 2.1},
+ organization = {Comprehensive \TeX\ Archive Network},
+ year = {2018},
+ url = {https://ctan.org/tex-archive/macros/latex/required/amsmath/amsldoc.pdf},
+ urldate = {July 5, 2019},
}
-%% urltype = {retrieved},
@online{sharpe1,
-author = {Michael Sharpe},
-title = {New {TX} font package, Version 1.554},
-year = {2018},
-organization = {Comprehensive \TeX\ Archive Network},
-url = {https://ctan.org/pkg/newtx},
-urldate = {27 April 2019},
+ author = {Michael Sharpe},
+ title = {New {TX} Font Package, Version 1.554},
+ organization = {Comprehensive \TeX\ Archive Network},
+ year = {2018},
+ url = {https://ctan.org/pkg/newtx},
+ urldate = {April 27, 2019},
}
@online{sharpe2,
-author = {Michael Sharpe},
-title = {The \textsf{mathalfa} package, Version 1.10},
-year = {2018},
-organization = {Comprehensive \TeX\ Archive Network},
-url = {https://ctan.org/pkg/mathalfa},
-urldate = {27 April 2019},
+ author = {Michael Sharpe},
+ title = {The \textsf{mathalfa} Package, Version 1.10},
+ organization = {Comprehensive \TeX\ Archive Network},
+ year = {2018},
+ url = {https://ctan.org/pkg/mathalfa},
+ urldate = {April 27, 2019},
}
- @online{tolusis,
- author = {Sigitas Tolu{\v{s}}is},
- title = {The \textsf{flushend} package},
- year = {2017},
+ at online{tolusis,
+ author = {Sigitas Tolu{\v{s}}is},
+ title = {The \textsf{flushend} Package, Version 3.3},
organization = {Comprehensive \TeX\ Archive Network},
- url = {https://www.ctan.org/pkg/flushend},
- urldate = {October 1, 2019},
- version = {3.3},
+ year = {2017},
+ url = {https://www.ctan.org/pkg/flushend},
+ urldate = {October 1, 2019},
}
@online{bottcher,
- author = {Stephan I. B{\"o}ttcher and Uwe L{\"u}ck},
- title = {\textsf{lineno.sty}: A {\LaTeX} package to attach line numbers to paragraphs},
- year = {2005},
+ author = {Stephan I. B{\"o}ttcher and Uwe L{\"u}ck},
+ title = {\textsf{lineno.sty}: A {\LaTeX} Package to Attach Line Numbers to Paragraphs, Version 4.41},
organization = {Comprehensive \TeX\ Archive Network},
- url = {https://www.ctan.org/pkg/lineno},
- urldate = {August 17, 2019},
- version = {4.41},
+ year = {2005},
+ url = {https://www.ctan.org/pkg/lineno},
+ urldate = {August 17, 2019},
}
@online{oostrum,
- author = {Piet van Oostrum},
- title = {The \textsf{fancyhdr} and \textsf{extramarks} packages},
- year = {2019},
+ author = {Piet van Oostrum},
+ title = {The \textsf{fancyhdr} and \textsf{extramarks} Packages, Version 3.10},
organization = {Comprehensive \TeX\ Archive Network},
- url = {https://www.ctan.org/pkg/lineno},
- urldate = {August 17, 2019},
- version = {3.10},
+ year = {2019},
+ url = {https://www.ctan.org/pkg/lineno},
+ urldate = {August 17, 2019},
}
@online{fairbairns,
- author = {Robin Fairbairns and Sebastian Rahtz and Leonor Barroca},
- title = {A package for rotated objects in \LaTeX},
- year = {2016},
+ author = {Robin Fairbairns and Sebastian Rahtz and Leonor Barroca},
+ title = {A Package for Rotated Objects in \LaTeX, Version 2.16d},
organization = {Comprehensive \TeX\ Archive Network},
- url = {https://www.ctan.org/pkg/rotating},
- urldate = {October 2, 2019},
- version = {v2.16d},
-}
+ year = {2016},
+ url = {https://www.ctan.org/pkg/rotating},
+ urldate = {October 2, 2019},
+}
+
+ at BOOK{book,
+ author = {James Tiberius Kirk},
+ year = {2288},
+ title = {Decline and Fall of the Romulan Empire},
+ edition = {7},
+ series = {Humankind's Greatest Writings},
+ volume = {23},
+ url = {http://web.mit.edu},
+ publisher = {Vulcan Free Press},
+ address = {T'Paal},
+ note = {to appear},
+}
+
+ at inbook{inbook,
+ author = {Winston S. Churchill},
+ year = {1948},
+ title = {The Gathering Storm},
+ edition = {1},
+ series = {The Second World War},
+ volume = {1},
+ chapter = {5},
+ pages = {66--89},
+ publisher = {Houghton Mifflin Co.},
+ address = {Boston},
+ note = {{``The Locust Years''}},
+}
+%% inbook supports these fields: author OR editor, year, title, edition, version, series, volume OR number, doi, url, eprint with archive, publisher, address, note. type={} field changes "Chap." to something else.
+
+ at book{fourier1822,
+ author = {Jean Baptiste Joseph Fourier},
+ year = {1822},
+ title = {Th\'{e}orie Analytique de la Chaleur},
+ publisher = {Firmin Didot, P\`{e}re et Fils},
+ address = {Paris},
+ url = {https://archive.org/details/analyticaltheory00fourrich},
+}
+
Modified: trunk/Master/texmf-dist/doc/latex/asmeconf/asmeconf-template.pdf
===================================================================
(Binary files differ)
Modified: trunk/Master/texmf-dist/doc/latex/asmeconf/asmeconf-template.tex
===================================================================
--- trunk/Master/texmf-dist/doc/latex/asmeconf/asmeconf-template.tex 2020-04-15 21:33:21 UTC (rev 54751)
+++ trunk/Master/texmf-dist/doc/latex/asmeconf/asmeconf-template.tex 2020-04-15 21:33:36 UTC (rev 54752)
@@ -3,10 +3,11 @@
%% This file is asmeconf-template.tex, a template to format ASME Conference papers according to
%% the requirements on ASME's conference web pages.
%%
-%% This file is version 1.17 dated 2020/02/29
+%% This file is version 1.18 dated 2020/04/14
%%
%% As of version 1.11, this template follows ASME's newer conference guidelines first posted July 2019.
-%% The new guidelines have changed the requested author block formatting (old format is also supported)
+%% The new guidelines have changed the requested author block formatting to be inline.
+%% (This template supports the old grid format as a package option.)
%% Nomenclature now follows the abstract. Abstract is in italics.
%%
%% Author: John H. Lienhard V
@@ -85,9 +86,8 @@
%% Class options are described above.
-\documentclass[varvw,largesc,upint,mathalfa=cal=euler,colorlinks,hyphenate,balance]{asmeconf} % <=== remove colorlinks for submission to ASME
+\documentclass[varvw,largesc,upint,mathalfa=cal=euler,hyphenate,balance,lang-second=french,lang=english,colorlinks]{asmeconf} % <=== remove colorlinks before submission to ASME!
-
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
%%%%%%%%%%%%%%%%%%%%%%% Fields to be completed %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
@@ -104,7 +104,7 @@
\begin{document}
-% Change these fields to the right content for your conference!
+% Change these fields to the right content for your conference.
% You can comment these out if for some reason you don't want a header.
% Use title case (first letters capitalized), not all capitals
@@ -140,8 +140,9 @@
\maketitle
-%%% For tracking various versions of your draft. Change text to suit your own needs. Remove from final version.
-%%% \date{..} is the same command.
+%%% Use this footnote for tracking various versions of your draft. Change text to suit your own needs.
+%%% Remove from final version.
+%%% \date{..} calls the same command.
\versionfootnote{Documentation for \texttt{asmeconf.cls}. Version \versionno; \today.}% <=== Delete before final submission.
@@ -158,7 +159,7 @@
%%
%% Abstract should be no more than 200 words
\begin{abstract}
-This paper is an example and template for typesetting ASME Conference Papers in {\upshape\LaTeX} using the {\upshape\texttt{asmeconf}} class. This class follows ASME guidelines for margins, fonts, headings, captions, and reference formats as of early 2020. The class is compatible with the {\upshape\texttt{hyperref}} package for producing pdf files with links. The optional argument of \verb|\section| has been modified for manually setting pdf bookmarks when macros or complicated mathematics are included in section headings. The class is intended to be used with the {\upshape\texttt{asmeconf.bst} \hologo{BibTeX}} style, which is part of this distribution. The class may be invoked with several options, most of which address math fonts. The class calls a number of packages, all of which are in {\upshape\TeX\ Live} and on CTAN. The class is compatible with {\upshape\hologo{pdfLaTeX}} or {\upshape\hologo{LuaLaTeX}}.
+This paper is an example of and a template for typesetting ASME Conference Papers in {\upshape\LaTeX} using the {\upshape\texttt{asmeconf}} class. This class follows ASME guidelines for margins, fonts, headings, captions, and reference formats as of early 2020. The class is intended to be used with the {\upshape\texttt{asmeconf.bst} \hologo{BibTeX}} style, which is part of this distribution. The class is compatible with the {\upshape\texttt{hyperref}} package, so that pdfs will contain internal and external hyperlinks, pdf bookmarks, and metadata. Links may be colored, for online use, or black, for publication. Section headers may contain mathematics, references, citations, and footnotes. The class enables inline author names, following ASME's current style, but is backward compatible to the traditional block style. The class includes many options, e.g., for math fonts. The class calls a number of packages, all of which are in {\upshape\TeX\ Live} and on CTAN. The class is compatible with {\upshape\hologo{pdfLaTeX}} or {\upshape\hologo{LuaLaTeX}}.
\end{abstract}
%%%%%%%%% NOMENCLATURE (OPTIONAL) %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
@@ -193,7 +194,7 @@
\section{Introduction}
The \texttt{asmeconf} class file will typeset papers with margins, fonts, headings, captions, and reference formats that follow those specified for conference papers of the American Society of Mechanical Engineers (ASME). Internal and external hyperlinks will be set automatically, and the pdf file will contain bookmarks and metadata. This class is not a publication of ASME.
-The \texttt{.tex} file may be written using standard \LaTeX\ commands, although some specific initial commands are needed to format the blocks containing the author[s], title, and abstract. This class loads a number of other packages, all of which are contained in up-to-date versions of \href{https://www.tug.org/texlive/}{\TeX\ Live}, \href{http://www.tug.org/mactex/}{Mac\TeX}, and similar distributions. If you find you are missing one of these packages, you may obtain it from CTAN (\href{http://ctan.org}{ctan.org}).
+The \texttt{.tex} file may be written using standard \LaTeX\ commands, although some specific initial commands are needed to format the blocks containing the author[s], title, and abstract. This class loads a number of other packages, all of which are contained in up-to-date versions of \href{https://www.tug.org/texlive/}{\TeX\ Live}, \href{http://www.tug.org/mactex/}{Mac\TeX}, and similar distributions. If you find you are missing one of these packages, you may obtain it at no cost from CTAN (\href{http://ctan.org}{ctan.org}).
\subsection{Essential Initial Commands}
To begin, fill in the fields to be completed at top of the \texttt{asmeconf-template.tex} file. These fields include the headers for your conference and your paper number. Specified metadata will be placed into the pdf file itself.
@@ -201,30 +202,36 @@
Put author names into the \verb|\SetAuthors{name, name,...}| command in the desired order; follow the syntax illustrated \texttt{asmeconf-template.tex} file. Put each distinct address sequentially into a separate \verb|\SetAffiliation{n}{address}|, where $n = 1,2,\ldots$ Tag each author with the right affiliation by putting \verb|\affil{n}| after that author's name inside the \verb|\SetAuthors{..| command.
-Author addresses are to be kept short. List the author institution, and the City, State (US authors), City, Province, Canada (Canadian authors), or City, Country (other international authors).
+Author addresses are to be kept short. List the author institution, and the City, State (US authors), City, Province, Canada (Canadian authors), or City, Country (for other international authors).
One author (or more) may be designated as the corresponding author by placing \verb|\CorrespondingAuthor{email}| after \verb|\affil{#}|. Two or more authors may be joint first authors by putting \verb|\JointFirstAuthor| after \verb|\affil{#}|.
After setting up the headers, authors, and title, issue the \verb|\maketitle| command.
-The abstract text must be placed into \verb|\begin{abstract}..\end{abstract}|. The abstract will automatically be italicized. Keywords may optionally be including using the \verb|\keywords{..}| command. This command \textit{must} be issued before the abstract environment.
+The abstract text must be placed into \verb|\begin{abstract}| \ldots \verb|\end{abstract}|. The abstract will automatically be italicized. Keywords may be included using the \verb|\keywords{..}| command. The \texttt{keyword} command \textit{must} be issued before the abstract environment.
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
-\section{Equations and Nomenclature}
-Equations are typeset in the usual way. The class file loads the \texttt{amsmath} and \texttt{mathtools} packages. Further, the \texttt{newtxmath} package used for the math fonts includes many additional features (see Sect.~\ref{sec:moremath}).
+
+\section{Referring to Citations, Figures, and Equations}
+Citations are automatically numbered \cite{ning2002}. They should be inserted at the appropriate point using a \verb|\cite{ref}| command~\cite{gibson2008,stevens1999}. The citations will be automatically sorted and compressed if they are given in a set \cite{stevens1999,ning2002,gibson2008,wions2005,smith2002,watson1982}.
+A specific reference may be named with an abbreviation, as in Ref.~\cite{watson1982}.
+See the \texttt{asmeconf-sample.bib} file and Sect.~\ref{sec:references} for examples of how to enter your references.
+
+For ASME conference papers, the labels Equation and Figure should be abbreviated when they do not start a sentence, as in Eq.~\eqref{eqn:dw} and Fig.~\ref{fig:1}. Figure~\ref{fig:1} is spelled out when it starts a sentence. Equation~\eqref{eqn:dw} is spelled out when it starts a sentence.
+
+Equations are typeset in the usual way and will be automatically numbered. The class file loads the \texttt{amsmath} and \texttt{mathtools} packages. Further, the \texttt{newtxmath} package used for the math fonts includes many additional features (see Sect.~\ref{sec:moremath}).
\begin{equation}\label{eqn:fourier}
\vec{q} = -k\nabla T
\end{equation}
-ASME prefers SI units. U.S.\ style units may follow in parentheses. Be sure to put your symbols into the nomenclature list, including the units.
+ASME prefers SI units. (U.S.\ style units may follow in parentheses.) Be sure to put all symbols into the nomenclature list, including their units.
-For ASME conference papers, the labels Equation and Figure should be abbreviated when they do not start a sentence, as in Eq.~\eqref{eqn:dw} and Fig.~\ref{fig:1}. Figure~\ref{fig:1} is spelled out when it starts a sentence. Equation~\eqref{eqn:dw} is spelled out when it starts a sentence.
-
%%%%%%%%%%%%% begin figure %%%%%%%%%%%%%%%%%
%% captions go below figures
+
\begin{figure}
\centering\includegraphics[width=0.7\linewidth]{sample-figure-1.pdf}
\caption{Figure caption with math, eqn.~\eqref{eqn:fourier}: $z = (r,\phi)$ \cite{Lienhard2019b}\label{fig:1}}
@@ -234,15 +241,17 @@
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
+
%% Use title case for subsections and subsubsections
+
\section{Section Headings and Captions}
-ASME requires that section headings and captions be set in an uppercase, sans serif font. The class will do this automatically. You can place \verb|\cite{..}|, \verb|\ref{..}|, \verb|\label{..}|, and mathematics into headings and captions directly, as you would in the main text. Do not enclose them braces, e.g.\ \verb|{\cite{..}}|, which will cause errors. You can place \verb|\footnote{..}| into headings, but not into captions.\footnote{See \texttt{tex-stackexchange} for various approaches to footnotes in captions, if they seem necessary. For footnotes in tables, use the \texttt{tablefootnote} package.}\footnote{Sequential footnote.}
+ASME requires that section headings and captions be set in an uppercase, sans serif font. The class will do this automatically. You can place \verb|\cite{..}|, \verb|\ref{..}|, \verb|\label{..}|, and mathematics into headings and captions directly, as you would in the main text. Do not enclose them braces, e.g.\ \verb|{\cite{..}}|, which will cause errors. You can place \verb|\footnote{..}| into headings, but not into captions.\footnote{See \texttt{tex-stackexchange} for various approaches to footnotes in captions, if they seem necessary. For footnotes in tables, use the \texttt{tablefootnote} package.}\footnote{Sequential footnotes are automatically separated by a comma.}
Text in section headings and captions will not be capitalized if enclosed in a \verb|\NoCaseChange{..}| command.
Sections may either be numbered or left unnumbered.
-Simple mathematical expressions can be used in either captions or section headings. For a section heading that includes more complicated math (and macros), you may use the optional argument of \verb|\section[..]{..}| to create a pdf bookmark without losing characters or producing warnings or errors. See the \texttt{asmeconf-template.tex} source file for examples of this. These bookmarks should usually be text expressions, although some math is supported.
+Simple mathematical expressions can be used in either captions or section headings. For a section heading that includes more complicated math (and macros), you may use the optional argument of \verb|\section[..]{..}| to create a pdf bookmark without losing characters or producing warnings or errors. See the \texttt{asmeconf-template.tex} source file for examples of this procedure. These bookmarks should usually be text expressions, although some math is supported.
If you wish to override the default math format in captions, put \verb|\mathversion{normal}| in the caption.
@@ -293,16 +302,71 @@
\section{Tables and Figures}
Table \ref{tab:1} is an example of a simple table. Table captions should be placed above tables.
-The class loads the \texttt{booktabs} package (used for horizontal rules in both Table \ref{tab:1} and \ref{tab:2}), and the \texttt{array} and \texttt{dcolumn} packages which provide extended capabilities for columns in the \texttt{tabular} environment (used in Table \ref{tab:2}). Table \ref{tab:3} is an example of a table that spans two columns.
+The class loads the \texttt{booktabs} package (used for horizontal rules in both Table \ref{tab:1} and \ref{tab:2}), and the \texttt{array} and \texttt{dcolumn} packages which provide extended capabilities for columns in the \texttt{tabular} environment (used in Table \ref{tab:2}). Table \ref{tab:3} is an example of a table that spans two columns. Two column tables (and figures) will always float to the top of a later page.
-Figure captions go below figures. Figure~\ref{fig:2} is an example of a figure that spans two columns and includes subfigures. The text in figures (and tables) should be no smaller than 6~point type. Images in figures are handles by the standard \texttt{graphicx} package.
+Figure captions go below figures. Figure~\ref{fig:2} is an example of a figure that spans two columns and includes subfigures. The text in figures (and tables) should be no smaller than 6~point type. Images in figures are handled by the standard \texttt{graphicx} package.
Landscape figures and tables may be produced at full-page size by putting \verb|\usepackage[figuresright]{rotating}| in your \texttt{.tex} file's preamble and using the \texttt{sidewaystable*} and \texttt{sidewaysfigure*} environments~\cite{fairbairns}.
+%%%%%%%%%%%%%%% begin two column table %%%%%%%%%%%%%%%%%%
+\begin{table*}
+\caption{A table spanning two columns\label{tab:3}}%
+\centering{%
+\begin{tabular*}{0.8\textwidth}{@{\hspace*{1.5em}}@{\extracolsep{\fill}}ccc!{\hspace*{3.em}}ccc@{\hspace*{1.5em}}}
+\toprule
+\multicolumn{1}{@{\hspace*{1.5em}}c}{$x$\rule{0pt}{11pt}} &
+\multicolumn{1}{c}{$\textrm{erf}(x)$} &
+\multicolumn{1}{c!{\hspace*{3.em}}}{$\textrm{erfc}(x)$} &
+\multicolumn{1}{c}{$x$} &
+\multicolumn{1}{c}{$\textrm{erf}(x)$} &
+\multicolumn{1}{c@{\hspace*{1.5em}}}{$\textrm{erfc}(x)$} \\ \midrule
+0.00 & 0.00000 & 1.00000 & 1.10 & 0.88021 & 0.11980\rule{0pt}{11pt} \\
+0.05 & 0.05637 & 0.94363 & 1.20 & 0.91031 & 0.08969 \\
+0.10 & 0.11246 & 0.88754 & 1.30 & 0.93401 & 0.06599 \\
+0.15 & 0.16800 & 0.83200 & 1.40 & 0.95229 & 0.04771 \\
+0.20 & 0.22270 & 0.77730 & 1.50 & 0.96611 & 0.03389 \\
+0.30 & 0.32863 & 0.67137 & 1.60 & 0.97635 & 0.02365 \\
+0.40 & 0.42839 & 0.57161 & 1.70 & 0.98379 & 0.01621 \\
+0.50 & 0.52050 & 0.47950 & 1.80 & 0.98909 & 0.01091 \\
+0.60 & 0.60386 & 0.39614 & 1.82\makebox[0pt][l]{14} & 0.99000 & 0.01000 \\
+0.70 & 0.67780 & 0.32220 & 1.90 & 0.99279 & 0.00721 \\
+0.80 & 0.74210 & 0.25790 & 2.00 & 0.99532 & 0.00468 \\
+0.90 & 0.79691 & 0.20309 & 2.50 & 0.99959 & 0.00041 \\
+1.00 & 0.84270 & 0.15730 & 3.00 & 0.99998 & 0.00002 \\[2pt]
+\bottomrule\end{tabular*}
+}
+\end{table*}
-%%%%%%%%%%%%%%%%% begin wide figure %%%%%%%%%%%%%%%%%%%%%%%%%%%
+%%%%%%%%%%%%%%%%% end two column table %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
-\begin{figure*}[t]
+
+
+
+%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
+
+\section{Reference Formatting with \NoCaseChange{\texttt{asmeconf.bst}}\footnote{If you have text in a section heading or caption that you do not want to be capitalized, such as an SI unit, enclose it in a \texttt{\textbackslash NoCaseChange} command.}}\label{sec:references}
+
+The {\upshape\texttt{asmeconf.bst}} \hologo{BibTeX} style follows the reference styles shown on ASME's conference web site in early 2020. Examples for these and many other cases are given in the \texttt{asmeconf-sample.bib} file, which is part of this distribution. Citations and references are managed by the standard \texttt{natbib} package. Nevertheless, a few comments are necessary.
+
+%% sub-subsections should *not* be numbered
+
+\subsubsection*{DOI, URL, and eprint} Include DOI numbers when they are available. URL's may alternatively be given. ASME requests that URLs point to a document's abstract.
+
+Elementary support for \texttt{eprint} numbers is also included, generating a url at the end of the citation. The \texttt{archive} type may be specified using the macros \texttt{arxiv, googlebooks, hdl, jstore, oclc}, or \texttt{pubmed} (e.g., \texttt{archive=hdl}, \textit{without} braces). Both \texttt{eprint} and \texttt{archive} fields \textit{must} be given. Other root urls may be invoked using \verb|archive = {http://another.url.org/}|.
+
+\subsubsection*{Online Sources} A bibliography field \verb|@online{..| is included for citation of online sources, such as web pages. A \texttt{url} or \texttt{eprint} with \texttt{archive} must be included. See the examples of use in the \texttt{asmeconf-sample.bib} file.
+
+\subsubsection*{Date Accessed} The \verb|urldate={..}| field may be used to provide the date on which a given url was accessed. By default, the text printed will be \texttt{Accessed `date',}. The word ``Accessed'' may be changed using the \verb|urltype={..}| field.
+
+\subsubsection*{Conference Location and Date} For the entry types \verb|@inproceeedings{..| and \verb|@proceeedings{..|, you may include \verb|venue={..}| and \verb|eventdate={..}| to specify the city and the date of a conference.
+
+\subsubsection*{Capitalization of Titles} ASME's bibliography style requires that document titles be in title case. The first letters of principal words are capitalized. Do this when writing the \texttt{.bib} file.
+
+
+
+%%%%%%%%%%%%%%%%% begin two column figure %%%%%%%%%%%%%%%%%%%%%%%%%%%
+
+\begin{figure*}
\begin{subfigure}[t]{0.5\textwidth} %subfigure is basically the same as minipage
\vbox{
\vspace*{1.7em}
@@ -313,7 +377,7 @@
}
\subcaption{Interior region\label{fig:interior-region}}
\end{subfigure}%
-%%%%%%%%%%%%% no spaces or line breaks between these two minipages
+%%%%%%%%%%%%% no spaces or line breaks between these two subfigures
\begin{subfigure}[t]{0.5\textwidth}
\centering{%
\includegraphics{sample-figure-2b.pdf}
@@ -322,36 +386,16 @@
\caption{A figure with two subfigures \cite{Lienhard2019b}}\label{fig:2}
\end{figure*}
-%%%%%%%%%%%%%%%%%%% end wide figure %%%%%%%%%%%%%%%%%%%%%%%%%%%%%
+%%%%%%%%%%%%%%%%%%% end two column figure %%%%%%%%%%%%%%%%%%%%%%%%%%
-
-%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
-\section{Reference Formatting with \NoCaseChange{\texttt{asmeconf.bst}}\footnote{If you have text in a section heading or caption that you do not want to be capitalized, such as an SI unit, enclose it in a \texttt{\textbackslash NoCaseChange} command.}}
-
-Citations are automatically numbered \cite{ning2002}. They should be inserted at the appropriate point using a \verb|\cite{ref}| command~\cite{gibson2008,stevens1999}. The citations will be automatically sorted and compressed as well if they are given in a set \cite{stevens1999,ning2002,gibson2008,wions2005,smith2002,watson1982,smith1998}. See the \texttt{asmeconf-sample.bib} file for examples of how to enter your references. Citations and references are managed by the standard \texttt{natbib} package.
-
-The {\upshape\texttt{asmeconf.bst}} \hologo{BibTeX} style follows the reference styles posted on ASME's conference web site in early 2020. Examples for these and many other cases are given in the \texttt{asmeconf-sample.bib} file, which is part of this distribution. Nevertheless, a few comments are necessary.
-
-%% subsubsections are not numbered
-\subsubsection*{DOI, URL, and eprint} Include DOI numbers when they are available. URL's may alternatively be given.
-
-Elementary support for \texttt{eprint} numbers is also included, generating a url at the end of the citation. The \texttt{archive} type may be specified using the macros \texttt{arxiv, googlebooks, hndl, jstore}, or \texttt{pubmed} (e.g., \texttt{archive=hndl}, \textit{without} braces). Both \texttt{eprint} and \texttt{archive} fields \textit{must} be given. Other root urls may be invoked using \verb|archive = {http://another.url.org/}|.
-
-\subsubsection*{Online Sources} A bibliography field \verb|@online{..| is included for citation of online sources, such as web pages. See the examples of use in the \texttt{asmeconf-sample.bib} file.
-
-\subsubsection*{Date Accessed} The \verb|urldate={..}| field may be used to provide the date on which a given url was accessed. By default, the text printed will be \texttt{accessed `date',}. The word ``accessed'' may be changed using the \verb|urltype={..}| field.
-
-\subsubsection*{Conference Location and Date} For the entry types \verb|@inproceeedings{..| and \verb|@proceeedings{..|, you may include \verb|venue={..}| and \verb|eventdate={..}| to specify the city and the date of a conference.
-
-
%%%%%%%%%%%%%%% MORE ON MATH %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
%% Dealing with complicated math in a section or subsection heading:
-%% the optional argument to \section will provide the pdf bookmark
-%% without losing characters or producing warnings/errors.
+%% the optional argument to \section will provide the pdf bookmark
+%% without losing characters or producing warnings/errors.
%%
-%% In this heading, u is forced to be upright with \mathrm{u}
+%% In this heading, letter u is forced to be upright with \mathrm{u}
%%
\section[More on math: u\cdot\omega=0]{More on math: $\vec{\mathrm{u}}\cdot\vec{\omega}=0$}\label{sec:moremath}
@@ -360,11 +404,11 @@
\texttt{multline} environment:
\begin{multline}\label{eqn:energy}
\frac{\partial}{\partial t}\left[\rho\bigl(e + \lvert\vec{u}\rvert^2\big/2\bigr)\right] + \nabla\cdot\left[\rho\bigl(h + \lvert\vec{u}\rvert^2\big/2 \bigr)\vec{u}\right] \\
- ={}-\nabla \cdot \vec{q} + \rho \vec{u}\cdot\vec{g}+ \frac{\partial}{\partial x_j}\left(d_{ji}u_i\right) + \dot{Q}_v
+ ={}-\nabla \cdot \vec{q} + \rho \vec{u}\cdot\vec{g}+ \frac{\partial}{\partial x_j}\bigl(d_{ji}u_i\bigr) + \dot{Q}_v
\end{multline}
An example using \texttt{align} appears in Appendix~\ref{appendix:a}.
-An alternative solution may be to set large equations into two-column-wide tables or figures. (You can find code online that sets equations across two columns, but the results may be sketchy.)
+An alternative solution may be to set large equations into two-column-wide tables or figures. While a package exists for setting equations that span two columns (\texttt{widetext.sty}), that code is erratic in relation to floats and page breaks.
Math italics are used for roman and greek letters by default. If you want an upright letter in math, you can use the relevant math alphabet, e.g., \verb|\mathrm, \mathbf, \mathsf|:
\begin{equation}\label{eqn:dw}
@@ -372,30 +416,32 @@
\end{equation}
To get additional symbols in bold math, you can use the \verb|\bm{..}| macro from the \texttt{bm} package, which is loaded by the class.
-The class file also provides upright sans-serif greek letters with \verb|\sfalpha| and similar expressions (e.g.\ $\sfalpha, \sfbeta, \sfgamma, \sfdelta \ldots \bm{\sfalpha, \sfbeta, \sfgamma, \sfdelta \ldots}$), in case they are needed (but note that the \verb|newtxmath| options \verb|frenchmath| and \verb|slantedGreek| also affect how greek letters are presented).
+The class file also provides upright sans-serif greek letters with \verb|\sfalpha| and similar expressions (e.g., $\sfalpha, \sfbeta, \sfgamma, \sfdelta$ \ldots $\bm{\sfalpha, \sfbeta, \sfgamma, \sfdelta \ldots}$), in case they are needed (but note that the \verb|newtxmath| options \verb|frenchmath| and \verb|slantedGreek| also affect how greek letters are presented).
-\subsection{The \texttt{newtxmath} and \texttt{mathalpha} packages~\cite{sharpe1,sharpe2}} The \texttt{newtxmath} package~\cite{sharpe1}, loaded by default, includes a large number of options for mathematics. Most options can be called as options to \verb|\documentclass|. For example, the \texttt{upint} option of \texttt{newtxmath} selects upright integral signs (rather than slanted integral signs):
+\subsection{The \texttt{newtxmath} and \texttt{mathalpha} Packages~\cite{sharpe1,sharpe2}} The \texttt{newtxmath} package~\cite{sharpe1}, loaded by default, includes a large number of options for mathematics, most of which can be called as options to \verb|\documentclass|. For example, the \texttt{upint} option of \texttt{newtxmath} selects upright integral signs (rather than slanted integral signs):
\begin{quote}
\verb|\documentclass[upint]{asmeconf}|.
\end{quote}
These math options are discussed further in the \texttt{asmejour-template.tex} file.
-In addition, many options for calligraphic, script, and fraktur fonts are available as options to the \texttt{mathalfa} package, which is also loaded. These may be invoked, for example, as
+In addition, many options for calligraphic, fraktur, and script fonts are available as options to the \texttt{mathalfa} package, which is also loaded. These may be invoked, for example, as
\begin{center}
\verb|\documentclass[mathalfa=cal=euler]{asmeconf}|
\end{center}
which selects the Euler font for \verb|\mathcal| (this is our default). To find all the font options, refer to the \texttt{mathalfa} package documentation \cite{sharpe2}.
-The typewriter font loaded is \texttt{inconsolata} (which is sans serif), as suggested by the \texttt{newtx} package documentation. The class is not set up for use with the \texttt{fontspec} or \texttt{unicode-math} packages.
+The typewriter font loaded is \texttt{inconsolata} (which is sans serif), as suggested by the \texttt{newtx} package documentation.
+The \texttt{asmeconf} class is not set up for use with the \texttt{fontspec} or \texttt{unicode-math} packages.
-%%%%%%%%%%%%%%% ADDITIONAL PACKAGE OPTIONS %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
+%%%%%%%%%%%%%%% ADDITIONAL PACKAGE OPTIONS %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
+
\section{Additional Options for \NoCaseChange{\texttt{asmeconf.cls}}}
The class accepts a number of options in addition to those already described. These options are discussed next.
\subsection{Colored hyperlinks}
-ASME requires that all text be in black when the paper is submitted for publication. For other uses, authors may
+ASME requires that all text be \textbf{in black} when the paper is submitted for publication. For other uses, authors may
obtain colored hyperlinks with the [\texttt{colorlinks}] option.
\subsection{Final Column Balancing} The option \texttt{[balance]} invokes the the \texttt{flushend} package~\cite{tolusis}.
@@ -403,7 +449,7 @@
\subsection{Line Numbers} The option \texttt{[lineno]} invokes the the \texttt{lineno} package~\cite{bottcher}. This option will produce line numbers in the margins. You must run \LaTeX\ \textit{twice} for proper placement of the numbers. Tables, captions, and footnotes will not be numbered. Line numbers can be helpful for review and editing, but should not be used in your final manuscript. See the documentation of the \texttt{lineno} package for further commands to control line numbering.
-The \texttt{lineno} package is not compatible with the \texttt{flushend} package that makes final short columns the same height. Balancing is disabled when this option is called.
+The \texttt{lineno} package is not compatible with the \texttt{flushend} package that makes final short columns the same height. Balancing is automatically disabled when this option is called.
\subsection{Changing the Footer Text} The option \texttt{[nofoot]} will omit the ASME copyright from the first page footer.
The footers are generated with the \texttt{fancyhdr} package~\cite{oostrum}, so you can change them in any way you like using the commands of that package. Only the default arrangement of footers matches ASME's style, however.
@@ -417,44 +463,15 @@
\subsection{Support for Other Languages} The package can be adapted to incorporate (or entirely use) languages other than English. See Appendix \ref{appendix:c} for details.
+%%%%% Conclusions %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
-%%%%%%%%%%%%%%% begin two column table %%%%%%%%%%%%%%%%%%
-\begin{table*}[t]
-\caption{A table spanning two columns\label{tab:3}}%
-\centering{%
-\begin{tabular*}{0.8\textwidth}{@{\hspace*{1.5em}}@{\extracolsep{\fill}}ccc!{\hspace*{3.em}}ccc@{\hspace*{1.5em}}}
-\toprule
-\multicolumn{1}{@{\hspace*{1.5em}}c}{$x$\rule{0pt}{11pt}} &
-\multicolumn{1}{c}{$\textrm{erf}(x)$} &
-\multicolumn{1}{c!{\hspace*{3.em}}}{$\textrm{erfc}(x)$} &
-\multicolumn{1}{c}{$x$} &
-\multicolumn{1}{c}{$\textrm{erf}(x)$} &
-\multicolumn{1}{c@{\hspace*{1.5em}}}{$\textrm{erfc}(x)$} \\ \midrule
-0.00 & 0.00000 & 1.00000 & 1.10 & 0.88021 & 0.11980\rule{0pt}{11pt} \\
-0.05 & 0.05637 & 0.94363 & 1.20 & 0.91031 & 0.08969 \\
-0.10 & 0.11246 & 0.88754 & 1.30 & 0.93401 & 0.06599 \\
-0.15 & 0.16800 & 0.83200 & 1.40 & 0.95229 & 0.04771 \\
-0.20 & 0.22270 & 0.77730 & 1.50 & 0.96611 & 0.03389 \\
-0.30 & 0.32863 & 0.67137 & 1.60 & 0.97635 & 0.02365 \\
-0.40 & 0.42839 & 0.57161 & 1.70 & 0.98379 & 0.01621 \\
-0.50 & 0.52050 & 0.47950 & 1.80 & 0.98909 & 0.01091 \\
-0.60 & 0.60386 & 0.39614 & 1.82\makebox[0pt][l]{14} & 0.99000 & 0.01000 \\
-0.70 & 0.67780 & 0.32220 & 1.90 & 0.99279 & 0.00721 \\
-0.80 & 0.74210 & 0.25790 & 2.00 & 0.99532 & 0.00468 \\
-0.90 & 0.79691 & 0.20309 & 2.50 & 0.99959 & 0.00041 \\
-1.00 & 0.84270 & 0.15730 & 3.00 & 0.99998 & 0.00002 \\[2pt]
-\bottomrule\end{tabular*}
-}
-\end{table*}
+\section{Conclusion}
+Provide a brief conclusion (3-4 lines).
-%%%%%%%%%%%%%%%% end two column table %%%%%%%%%%%%%%%%%%%
+%%%%% Acknowledgments %%%%%%%%%%%%%%%%%%%%%%%%%%%
-
-\section{Conclusion}
-Provide a brief conclusion (3-4 lines).
-
-\section*{Acknowledgment}
+\section*{Acknowledgments}
Place any acknowledgments here.
@@ -462,26 +479,26 @@
%%% REFERENCES %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
%%
%% Put your references into your .bib file in the usual way. Run latex once, bibtex once, then latex twice.
-%% This specific .bst style allows: venue = {location of conference}, and confmonth = {Month days}
+%% The asmeconf.bst style allows: venue = {Location of Conference}, and eventdate = {Month, days}
+%% for @inproceedings and @proceedings
%%
-\nocite{*} %% <=== delete this line unless you want to typeset the entire contents of your .bib file.
+\nocite{*} %% <=== Delete this line unless you want to typeset the entire contents of your .bib file!
\bibliographystyle{asmeconf} %% .bst file following ASME conference format. Do not change.
\bibliography{asmeconf-sample} %% <=== change this to name of your bib file
-
-
%%% APPENDICES %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
\appendix
%% Note that appendices will be "numbered" A, B, C, ... etc. Use \section, not \section*
-%% Equations should be numbered sequentially following those in the paper. Don't reset the equation counter.
+%% Equations will be numbered sequentially following those in the paper. Do not reset the equation counter.
%% Here we use the optional argument for the pdf bookmark.
\section[The vector product A\times B]{The vector product $\vec{A}\times\vec{B}$}\label{appendix:a}
-This is just a brief illustration of an appendix, showing numbering of the appendix and equations. Equations are numbered
+
+This brief illustration of an appendix shows the numbering of the appendix and equations. Equations are numbered
consecutively, following those in the paper.
\begin{align}
\frac{d\Gamma}{dt} &{}= \int_{\mathcal{C}} \frac{D\mathbf{u}}{Dt} \cdot d\mathbf{r}\\
@@ -492,8 +509,8 @@
\section{Option to use an author grid}\label{appendix:b}
-ASME's most recent templates place author names inline, with affiliations for all authors in rows below. This style is the
-default for this template.
+ASME's most recent templates place author names inline, with affiliations for all authors in rows below.
+This style is the default for this template.
The historical style of authors with affiliation in a grid of blocks may be invoked with
the option [\texttt{oldauthors}]. When using this form, the author names and addresses should be entered as below:
@@ -507,8 +524,10 @@
\noindent\hbox{}\hfil\verb|Institution \\ City, Country}|
\verb|\SetAuthorBlock{\CorrespondingAuthor{John Lienhard%|
\hbox{}\hfil\verb|}{lienhard at mit.edu}}{Institution \\ City, State}|
+
+Directly usable code is contained at the very end of the \texttt{asmeconf-template.tex} file.
-%% directly usable code follows \end{document}, below.
+%% directly usable code follows the \end{document} command below.
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
@@ -515,8 +534,11 @@
\section{Language Support}\label{appendix:c}
ASME publishes in English, but the \texttt{babel} package is loaded for
-users who may wish to include other languages. Options are supported to load a primary language, \texttt{lang=}, as well
-as a secondary and tertiary language, \texttt{lang-second} and \texttt{lang-third}. The primary language must be specified explicitly if a secondary language is loaded. If no language option is given, the package defaults to English.
+users who may wish to include other languages. Options are supported to load a primary language, \texttt{lang=},
+as well as a secondary and tertiary language, \texttt{lang-second} and \texttt{lang-third}.
+The primary language must be specified explicitly if a secondary language is loaded.
+If no language option is given, the package defaults to English. An example of use is
+shown in \selectlanguage{french}\appendixname\ \ref{app:fourier}.\selectlanguage{english}
The standard caption and section names will follow \texttt{babel}'s dictionary for primary languages other than English. Users may additionally change ``Keywords'', ``Nomenclature'', ``Corresponding author'', and ``Joint first authors'' by renewing the commands \verb|\keywordname|, \verb|\nomname|, \verb|\CAwords|, and \verb|\JAwords|. Changes to the page footer were described earlier. The pdf bookmark for ``Appendices'' may be changed by renewing \verb|\appendicesname|.
@@ -527,6 +549,15 @@
No effort has been made to support customization of language-specific fonts, although this is possible by modifying the class file (examples are given in the \texttt{newtx} documentation). The bibliography style, \texttt{asmeconf.bst}, is designed in English and aimed at \hologo{BibTeX}. Multilingual bibliographies can be supported using \texttt{BibLaTeX}.
+\selectlanguage{french}
+\section{Discours Préliminaire de Fourier}\label{app:fourier}
+
+Les causes primordiales ne nous sont point connues; mais elles sont assujetties à des lois simples et constantes, que l'on peut découvrir par l'observation, et dont l'étude est l'objet de la philosophie naturelle.
+
+La chale ur pénètre, comme la gravité, toutes les substances de l'univers, ses rayons occupent toutes les parties de l'espace. Le but de notre ouvrage est d'exposer les lois mathématiques que suit cet élément. Cette théorie formera désormais une des branches les plus importantes de la physique générale~\cite{fourier1822}.
+
+\selectlanguage{english}
+
\end{document}
@@ -548,7 +579,7 @@
% Can omit second argument of \CorrespondingAuthor if putting email into address
% i.e., can just use \CorrespondingAuthor{name}.
-% Can also put multiple emails and use command more than once for multiple corresponding authors.
+% Can also put multiple emails in the command and use more than once for multiple corresponding authors.
\SetAuthorBlock{\CorrespondingAuthor{John H.\ Lienhard V}{lienhard at mit.edu}}{%
Massachusetts Institute of Technology \\ Cambridge, MA}
Modified: trunk/Master/texmf-dist/tex/latex/asmeconf/asmeconf.cls
===================================================================
--- trunk/Master/texmf-dist/tex/latex/asmeconf/asmeconf.cls 2020-04-15 21:33:21 UTC (rev 54751)
+++ trunk/Master/texmf-dist/tex/latex/asmeconf/asmeconf.cls 2020-04-15 21:33:36 UTC (rev 54752)
@@ -1,13 +1,13 @@
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
%%
%% This file provides the asmeconf class for formatting conference papers according to
-%% ASME conference requirements as represented on ASME's conference web pages in mid-2019.
+%% ASME conference requirements as represented on ASME's conference web pages in 2020.
%%
%% Please note that ASME's journals follow specifications different from ASME conference papers.
%%
-%% This file is version 1.17 dated 2020/02/29.
- \def\versionno{1.17}
- \def\versiondate{2020/02/29\space}
+%% This file is version 1.18 dated 2020/04/14.
+ \def\versionno{1.18}
+ \def\versiondate{2020/04/14\space}
%%
%% Author: John H. Lienhard V
%% Department of Mechanical Engineering
More information about the tex-live-commits
mailing list.