eplain[55] doc/userdef.texi: doc updates and miniltx/optex references

commits+karl at tug.org commits+karl at tug.org
Mon Oct 3 02:49:11 CEST 2022


Revision: 55
          http://tug.org/svn/eplain?view=revision&revision=55
Author:   karl
Date:     2022-10-03 02:49:11 +0200 (Mon, 03 Oct 2022)
Log Message:
-----------
doc updates and miniltx/optex references

Modified Paths:
--------------
    trunk/ChangeLog
    trunk/INSTALL
    trunk/README
    trunk/doc/Makefile
    trunk/doc/arrow.texi
    trunk/doc/csindex.texi
    trunk/doc/demo.texi
    trunk/doc/eplain.1
    trunk/doc/eplain.info
    trunk/doc/eplain.pdf
    trunk/doc/eplain.texi
    trunk/doc/hlink.texi
    trunk/doc/index.texi
    trunk/doc/install.texi
    trunk/doc/intro.texi
    trunk/doc/invoke.texi
    trunk/doc/progdef.texi
    trunk/doc/userdef.texi

Removed Paths:
-------------
    trunk/doc/texinfo.tex

Property Changed:
----------------
    trunk/doc/arrow.texi
    trunk/doc/csindex.texi
    trunk/doc/demo.texi
    trunk/doc/eplain.texi
    trunk/doc/index.texi
    trunk/doc/install.texi
    trunk/doc/intro.texi
    trunk/doc/invoke.texi
    trunk/doc/progdef.texi

Modified: trunk/ChangeLog
===================================================================
--- trunk/ChangeLog	2022-10-02 17:52:12 UTC (rev 54)
+++ trunk/ChangeLog	2022-10-03 00:49:11 UTC (rev 55)
@@ -1,5 +1,29 @@
 2022-10-02  Karl Berry  <karl at freefriends.org>
 
+	* README: update urls, mention miniltx and optex.
+	* doc/userdef.texi (Loading LaTeX packages): mention that
+	miniltx.tex can usually be used on its own, without Eplain.
+		
+	* doc/eplain.texi (Top): remove detailed menu, seems
+	unnecessary (and Emacs commands for updating aren't working well).
+	* doc/intro.texi: mention alternatives to Eplain (miniltx, optex).
+
+	* doc/progdef.texi (Scratch registers): new section to describe
+	standard conventions for register usage.
+	
+	* doc/eplain.1,
+	* doc/install.texi,
+	* doc/invoke.texi: update to something like current reality.
+
+	* doc/*.texi: use svn $Id$.
+	* doc/*.texi: use https urls; update urls.
+	
+	* doc/texinfo.tex: remove; let's just assume it's available.
+
+	* doc/Makefile (TEXFOT): new definition for quieter TeX runs.
+
+2022-10-02  Karl Berry  <karl at freefriends.org>
+
 	* btxmac.tex (\futurenonspacelet, \@step..., \providecommand):
 	use \@btxcs instead of \cs, which may be otherwise defined,
 	e.g., by plain tugboat.sty. Version 0.99q.

Modified: trunk/INSTALL
===================================================================
--- trunk/INSTALL	2022-10-02 17:52:12 UTC (rev 54)
+++ trunk/INSTALL	2022-10-03 00:49:11 UTC (rev 55)
@@ -1,34 +1,27 @@
 Installation
+Invoking Eplain
+Installation
+Invoking Eplain
+Installation
 ************
 
 Your TeX installation should already contain a version of Eplain
-(`eplain.tex') in its main `texmf' tree (usually under
-`/usr/share/texmf/tex/eplain/' on Unix systems).  To install a newer
-version of Eplain, put the new `eplain.tex' (included in Eplain
-distributions) in the `tex/eplain/' subdirectory of your local `texmf'
-tree.  The newer version you install in the local tree should override
-the older one in the main tree.
+('eplain.tex') in its main 'texmf' tree; with TeX Live, it's in
+'.../texmf-dist/tex/eplain/eplain.tex'.
 
-   The location of the local `texmf' tree obviously depends on your
-operating system and TeX installation.  On Unix systems the usual
-location is `/usr/local/share/texmf/'.  If you don't have write
-permissions for `/usr/local/share/texmf/', many installations read the
-`texmf' tree in the user's home directory; `eplain.tex' then should go
-under `~/texmf/tex/eplain/'.  For more information about TeX directory
-structure, please see
-`http://www.tex.ac.uk/cgi-bin/texfaq2html?label=tds'.
+   Generally, you can just use that version and there is no need to do
+anything else. But if you want to use a newer version of Eplain for a
+given document, you can put the new 'eplain.tex' in the document's
+directory, and it will be found.
 
-   If you prefer to install `eplain.tex' in a non-standard place, set
-an environment variable (`TEXINPUTS' for the Web2C port of TeX to Unix)
-to tell TeX how to find it.
+   If you want to install a new 'eplain.tex' in some other place, set an
+environment variable (commonly, 'TEXINPUTS') to tell TeX how to find it.
 
-   If you want, you can also create a format (`.fmt') file for Eplain,
-which will eliminate the time spent reading the macro source file with
-`\input'.  You do this by issuing a sequence of Unix commands something
-like this:
+   Distributions should also create and maintain the 'eplain.fmt' file
+file. But if you want to do it yourself, you can:
 
-     prompt$ touch eplain.aux
-     prompt$ initex
+     $ touch eplain.aux
+     $ initex
      This is TeX, ...
      **&plain eplain
      (eplain.tex)
@@ -35,12 +28,11 @@
      *\dump
      ... MESSAGES ...
 
-You must make sure that `eplain.aux' exists _before_ you run `initex';
+You must make sure that 'eplain.aux' exists _before_ you run 'initex';
 otherwise, warning messages about undefined labels will never be issued.
 
-   You then have to install the resulting `eplain.fmt' in your local
-`texmf' tree or set an environment variable to tell TeX how to find it.
-For the Web2C port of TeX to Unix, format files are usually installed
-under `/usr/local/share/texmf/web2c/' or `/var/lib/texmf/web2c/'; the
-environment variable is `TEXFORMATS'.
+   You then have to install the resulting 'eplain.fmt' in your local
+'texmf' tree or set an environment variable ('TEXFORMATS' to tell TeX
+how to find it. You'll need to consult your distribution's documentation
+about that.
 

Modified: trunk/README
===================================================================
--- trunk/README	2022-10-02 17:52:12 UTC (rev 54)
+++ trunk/README	2022-10-03 00:49:11 UTC (rev 55)
@@ -31,5 +31,16 @@
 from http://www.gnu.org/software/teximpatient, along with several
 translations.
 
-Mailing list: http://lists.tug.org/tex-eplain (tex-eplain at tug.org)
-The Eplain home page is http://tug.org/eplain.
+Mailing list: https://lists.tug.org/tex-eplain (tex-eplain at tug.org)
+The Eplain home page is https://tug.org/eplain.
+
+P.S. Alternatives to Eplain:
+1) If you just want to load the LaTeX color or graphics package,
+the LaTeX team's miniltx.tex suffices:
+  \input miniltx.tex
+  \input graphicx.tex
+
+2) If you're interested in a fully-fledged format that shares much of
+Eplain's (and plain.tex's) philosophy, check out OpTeX:
+  https://ctan.org/pkg/optex
+

Modified: trunk/doc/Makefile
===================================================================
--- trunk/doc/Makefile	2022-10-02 17:52:12 UTC (rev 54)
+++ trunk/doc/Makefile	2022-10-03 00:49:11 UTC (rev 55)
@@ -6,12 +6,15 @@
 MAKEINFO_HTML   = $(MAKEINFO_FLAGS) --html \
                  -c TOP_NODE_UP_URL=http://tug.org/texinfohtml/
 
+# for quieter TeX
+TEXFOT          = texfot
+
 TEXI2FLAGS      = -b -I ..
 
-TEXI2PDF        = texi2dvi
+TEXI2PDF        = $(TEXFOT) texi2dvi
 TEXI2PDF_FLAGS  = --pdf $(TEXI2FLAGS)
 
-TEXI2DVI        = texi2dvi
+TEXI2DVI        = $(TEXFOT) texi2dvi
 TEXI2DVI_FLAGS  = $(TEXI2FLAGS)
 
 DVIPS           = dvips

Modified: trunk/doc/arrow.texi
===================================================================
--- trunk/doc/arrow.texi	2022-10-02 17:52:12 UTC (rev 54)
+++ trunk/doc/arrow.texi	2022-10-03 00:49:11 UTC (rev 55)
@@ -1,3 +1,4 @@
+ at c $Id$
 @c arrow.texi - documentation for Eplain's commutative diagrams.
 @c Copyright 1991, 1992, 2007, 2019 Steven Smith.
 @c This is part of the Eplain manual.
@@ -13,7 +14,7 @@
 @c GNU General Public License for more details.
 @c
 @c You should have received a copy of the GNU General Public License
- at c along with this file; if not, see <http://www.gnu.org/licenses/>.
+ at c along with this file; if not, see <https://www.gnu.org/licenses/>.
 
 @comment \input texinfo
 @comment setfilename arrow.info


Property changes on: trunk/doc/arrow.texi
___________________________________________________________________
Added: svn:keywords
## -0,0 +1 ##
+Date Author Id Revision
\ No newline at end of property
Modified: trunk/doc/csindex.texi
===================================================================
--- trunk/doc/csindex.texi	2022-10-02 17:52:12 UTC (rev 54)
+++ trunk/doc/csindex.texi	2022-10-03 00:49:11 UTC (rev 55)
@@ -1,3 +1,4 @@
+ at c $Id$
 @c Public domain.
 
 @node Macro index


Property changes on: trunk/doc/csindex.texi
___________________________________________________________________
Added: svn:keywords
## -0,0 +1 ##
+Date Author Id Revision
\ No newline at end of property
Modified: trunk/doc/demo.texi
===================================================================
--- trunk/doc/demo.texi	2022-10-02 17:52:12 UTC (rev 54)
+++ trunk/doc/demo.texi	2022-10-03 00:49:11 UTC (rev 55)
@@ -1,3 +1,4 @@
+ at c $Id$
 @c This is part of the Eplain manual.  Public domain.
 @set DEMODIR ../demo
 


Property changes on: trunk/doc/demo.texi
___________________________________________________________________
Added: svn:keywords
## -0,0 +1 ##
+Date Author Id Revision
\ No newline at end of property
Modified: trunk/doc/eplain.1
===================================================================
--- trunk/doc/eplain.1	2022-10-02 17:52:12 UTC (rev 54)
+++ trunk/doc/eplain.1	2022-10-03 00:49:11 UTC (rev 55)
@@ -1,4 +1,4 @@
-.TH EPLAIN 1 "30 September 2013" "Eplain 3.6"
+.TH EPLAIN 1 "2 October 2022" "Eplain 3.12"
 .\"=====================================================================
 .if t .ds TX \fRT\\h'-0.1667m'\\v'0.20v'E\\v'-0.20v'\\h'-0.125m'X\fP
 .if n .ds TX TeX
@@ -8,13 +8,6 @@
 .\" BX definition must follow TX so BX can use TX
 .if t .ds BX \fRB\s-2IB\s0\fP\*(TX
 .if n .ds BX BibTeX
-.\" LX definition must follow TX so LX can use TX
-.if t .ds LX \fRL\\h'-0.36m'\\v'-0.15v'\s-2A\s0\\h'-0.15m'\\v'0.15v'\fP\*(TX
-.if n .ds LX LaTeX
-.if t .ds AX \fRA\\h'-0.1667m'\\v'0.20v'M\\v'-0.20v'\\h'-0.125m'S\fP\*(TX
-.if n .ds AX AmSTeX
-.if t .ds AY \fRA\\h'-0.1667m'\\v'0.20v'M\\v'-0.20v'\\h'-0.125m'S\fP\*(LX
-.if n .ds AY AmSLaTeX
 .\"=====================================================================
 .SH NAME
 eplain \- expanded plain TeX
@@ -74,6 +67,12 @@
 .IR eplain.texi .
 .\"=====================================================================
 .SH "SEE ALSO"
+https://tug.org/eplain/
+.br
+https://ctan.org/pkg/graphics-pln
+.br
+https://ctan.org/pkg/optex
+.PP
 .BR texinfo (5),
 .BR tex (1),
 .br
@@ -80,8 +79,8 @@
 Karl Berry,
 .IR eplain ,
 TUGboat 11(4), 571--572, 1990,
-http://tug.org/TUGboat/tb11-4/tb30resources.pdf.
+https://tug.org/TUGboat/tb11-4/tb30resources.pdf
 .br
 Paul W. Abrahams with Karl Berry and Kathryn A. Hargreaves,
 .IR "\*(OX for the Impatient" ,
-http://www.gnu.org/software/teximpatient.
+https://ctan.org/pkg/impatient

Modified: trunk/doc/eplain.info
===================================================================
--- trunk/doc/eplain.info	2022-10-02 17:52:12 UTC (rev 54)
+++ trunk/doc/eplain.info	2022-10-03 00:49:11 UTC (rev 55)
@@ -1,8 +1,8 @@
-This is eplain.info, produced by makeinfo version 6.7 from eplain.texi.
+This is eplain.info, produced by makeinfo version 6.8 from eplain.texi.
 
-This manual documents the Eplain macros, version 3.11, July 2020. Eplain
-provides functionality for plain TeX that is intended to be useful
-regardless of how your document is actually formatted.
+This manual documents the Eplain macros, version 3.12, October 2022.
+Eplain provides functionality for plain TeX that is intended to be
+useful regardless of how your document is actually formatted.
 
    Most of this manual is in the public domain, like most of the Eplain
 code. It was originally written by Karl Berry, starting in 1989. Steven
@@ -21,7 +21,7 @@
 Eplain
 ******
 
-This manual documents the Eplain macros, version 3.11, July 2020.
+This manual documents the Eplain macros, version 3.12, October 2022.
 Eplain provides functionality for plain TeX that is intended to be
 useful regardless of how your document is actually formatted.
 
@@ -47,189 +47,6 @@
 * Macro index::                 Entries for TeX and Eplain control sequences.
 * Concept index::               General index.
 
- -- The Detailed Node Listing --
-
-User definitions
-
-* Diagnostics::                 Tracing information.
-* Rules::                       Changing the default rule dimensions.
-* Citations::                   Using BibTeX and Eplain to make bibliographies.
-* Displays::                    Changing the formatting of math displays.
-* Time of day::                 Producing the time of day.
-* Lists::                       Producing numbered and unordered lists.
-* Verbatim listing::            Producing text just as it appears.
-* Contents::                    Making a table of contents.
-* Cross-references::            Symbolically referring to pages or equations.
-* Page references::             Symbolic references to page numbers.
-* Equation references::         Symbolic references to equation numbers.
-* Indexing::                    Creating and typesetting indexes.
-* Justification::               Left- or right-justification, or centering.
-* Tables::                      Producing ordered tables.
-* Margins::                     Changing the margins directly.
-* Multiple columns::            Getting output in two columns.
-* Footnotes::                   Autonumbered footnotes; changing formatting.
-* Fractions::                   A better way to produce fractions in text.
-* Paths::                       Allowing line breaks in pathnames.
-* Logos::                       Various logos.
-* Boxes::                       Producing filled or open rectangles.
-* Checking for PDF output::     Checking for pdfTeX in PDF mode.
-* Loading LaTeX packages::      Support for LaTeX packages under plain TeX.
-
-Citations
-
-* Formatting citations::        Changing the way citations are printed.
-* Formatting bibliographies::   Changing the way bibliographies are printed.
-
-Displays
-
-* Formatting displays::         General formatting of displays.
-
-Lists
-
-* Formatting lists::            Changing how the lists look.
-
-Contents
-
-* Writing the .toc file::
-* Reading the .toc file::
-* Changing the .toc file's root name::
-* Alternative contents files::
-
-Cross-references
-
-* Defining generic references::
-* Using generic references::
-
-Equation references
-
-* Formatting equation references::
-* Subequation references::
-
-Indexing
-
-* Indexing terms::              Specifying what to index.
-* Typesetting an index::        Printing the sorted output.
-* Customizing indexing::        Creating commands and specifying extra actions.
-
-Indexing terms
-
-* Indexing commands::           Making index entries.
-* Modifying index entries::     Ranges, see/see also, page number typesetting.
-* Index entries with special characters::
-* Proofing index terms::        Noting index entries in the margins.
-
-Loading LaTeX packages
-
-* The \usepackage command::           Command to load packages.
-* Environment for loading packages::  Environment for the \usepackage commands.
-* Packages known to work::            Supported packages.
-* Packages known not to work::        Packages known not to work with Eplain.
-
-Hyperlinks
-
-* Introduction to hyperlinks::
-* Explicit hyperlinks::
-* Implicit hyperlinks::
-* Hyperlink drivers::
-* Setting hyperlink types and options::
-* Turning hyperlinks on/off::
-
-Implicit hyperlinks
-
-* General hyperlinks::              hrefint, hrefext
-* URL hyperlinks::                  url
-* Citation hyperlinks::             cite, bib
-* List hyperlinks::                 li
-* Cross-reference hyperlinks::      definexref, ref
-* Page reference hyperlinks::       xrdef, xref
-* Equation reference hyperlinks::   eq
-* Index hyperlinks::                idx
-* Footnote hyperlinks::             foot, footback
-* Contents hyperlinks::
-
-Index hyperlinks
-
-* Exact destinations for index terms::
-* Page destinations for index terms::
-* Choosing destination placement::
-* Index page list and page range parsers::
-* Hyperlinks in see and see also entries::
-
-Hyperlink drivers
-
-* Options supported by all drivers::
-* Hyperlink driver hypertex::
-* Hyperlink drivers pdftex and dvipdfm::
-* Hyperlink driver nolinks::
-
-Hyperlink driver hypertex::
-
-* Destination types for hypertex::
-* Destination options for hypertex::
-* Link types for hypertex::
-* Link options for hypertex::
-
-Hyperlink drivers pdftex and dvipdfm::
-
-* Destination types for pdftex and dvipdfm::
-* Destination options for pdftex and dvipdfm::
-* Link types for pdftex and dvipdfm::
-* Link options for pdftex and dvipdfm::
-
-Setting hyperlink types and options
-
-* Setting default types and options::
-* Setting group types::
-* Setting group options::
-
-Turning hyperlinks on/off
-
-* Turning low-level commands on/off::
-* Turning hyperlinks on/off for a group::
-
-Arrow theoretic diagrams
-
-* Slanted lines and vectors::
-* Commutative diagrams::
-
-Commutative diagrams
-
-* Arrows and morphisms::
-* Construction of commutative diagrams::
-* Commutative diagram parameters::
-
-Programming definitions
-
-* Category codes::              Changing category codes.
-* Allocation macros::           Non-outer versions of \newcount et al.
-* Iteration::                   Doing 'for' and 'while' loops in TeX.
-* Macro arguments::             Reading and ignoring them.
-* Converting to characters::    Normalizing control sequences and spaces.
-* Expansion::                   Controlling expansion.
-* Obeying spaces::              Making whitespace count anywhere.
-* Writing out numbers::         Making '1' into 'one'.
-* Mode-specific penalties::
-* Auxiliary files::             Testing for their existence.
-* User-defined environments::   User-defined environments.
-* Page list and page range parsers::
-
-Expansion
-
-* \csn and \ece::
-* \edefappend::
-* Hooks::                       Manipulating and executing named actions.
-* Properties::                  Associating information with a csname.
-* \expandonce::
-* \ifundefined::
-* \ifempty::
-* \ifinteger and \isinteger::
-* \futurenonspacelet::
-
-Demo files
-
-* Hyperlinks (xhyper.tex)::
-* Highlighting TeX comments in listings (lscommnt.tex)::
-
 
 File: eplain.info,  Node: Introduction,  Next: Installation,  Prev: Top,  Up: Top
 
@@ -245,7 +62,7 @@
 that.
 
    Eplain is not intended to provide typesetting capabilities, as does
-LaTeX (originally written by Leslie Lamport) and Texinfo (Originally
+LaTeX (originally written by Leslie Lamport) and Texinfo (originally
 written by Richard Stallman).  Instead, it provides definitions that are
 intended to be useful regardless of the high-level commands that you use
 when you actually prepare your manuscript.
@@ -283,19 +100,27 @@
 at the end of the source file 'eplain.tex'.  When corresponding, please
 refer to it.
 
-   To get on this mailing list yourself, email
-<tex-eplain-request at tug.org> with a message whose body contains a line
+   To subscribe to this mailing list (anyone can subscribe, and archives
+are public), visit <https://lists.tug.org/tex-eplain>.
 
-     subscribe YOU at YOUR.PREFERRED.ADDRESS
-
-or visit <http://lists.tug.org/tex-eplain>.
-
-   David Walden had reported his experience with Eplain as a new user.
-The article is available online at
+   David Walden reported his experience with Eplain as a new user.  The
+article is available online at
 <https://tug.org/pracjourn/2005-4/walden>.  An introductory article
 (written for TUGboat) is also available online at
 <https://tug.org/eplain/misc/tb84katsi.pdf>.
 
+   Finally, here are two alternatives to Eplain:
+
+  1. If you just want to load the LaTeX color or graphics package, the
+     LaTeX team's 'miniltx.tex' suffices:
+
+          \input miniltx.tex
+          \input graphicx.tex
+
+  2. If you're interested in a fully-fledged format that shares much of
+     Eplain's (and plain.tex's) philosophy, check out OpTeX:
+     <https://ctan.org/pkg/optex>.
+
 
 File: eplain.info,  Node: Installation,  Next: Invoking Eplain,  Prev: Introduction,  Up: Top
 
@@ -303,33 +128,22 @@
 **************
 
 Your TeX installation should already contain a version of Eplain
-('eplain.tex') in its main 'texmf' tree (usually under
-'/usr/share/texmf/tex/eplain/' on Unix systems).  To install a newer
-version of Eplain, put the new 'eplain.tex' (included in Eplain
-distributions) in the 'tex/eplain/' subdirectory of your local 'texmf'
-tree.  The newer version you install in the local tree should override
-the older one in the main tree.
+('eplain.tex') in its main 'texmf' tree; with TeX Live, it's in
+'.../texmf-dist/tex/eplain/eplain.tex'.
 
-   The location of the local 'texmf' tree obviously depends on your
-operating system and TeX installation.  On Unix systems the usual
-location is '/usr/local/share/texmf/'.  If you don't have write
-permissions for '/usr/local/share/texmf/', many installations read the
-'texmf' tree in the user's home directory; 'eplain.tex' then should go
-under '~/texmf/tex/eplain/'.  For more information about TeX directory
-structure, please see
-<http://www.tex.ac.uk/cgi-bin/texfaq2html?label=tds>.
+   Generally, you can just use that version and there is no need to do
+anything else.  But if you want to use a newer version of Eplain for a
+given document, you can put the new 'eplain.tex' in the document's
+directory, and it will be found.
 
-   If you prefer to install 'eplain.tex' in a non-standard place, set an
-environment variable ('TEXINPUTS' for the Web2C port of TeX to Unix) to
-tell TeX how to find it.
+   If you want to install a new 'eplain.tex' in some other place, set an
+environment variable (commonly, 'TEXINPUTS') to tell TeX how to find it.
 
-   If you want, you can also create a format ('.fmt') file for Eplain,
-which will eliminate the time spent reading the macro source file with
-'\input'.  You do this by issuing a sequence of Unix commands something
-like this:
+   Distributions should also create and maintain the 'eplain.fmt' file
+file.  But if you want to do it yourself, you can:
 
-     prompt$ touch eplain.aux
-     prompt$ initex
+     $ touch eplain.aux
+     $ initex
      This is TeX, ...
      **&plain eplain
      (eplain.tex)
@@ -340,10 +154,9 @@
 otherwise, warning messages about undefined labels will never be issued.
 
    You then have to install the resulting 'eplain.fmt' in your local
-'texmf' tree or set an environment variable to tell TeX how to find it.
-For the Web2C port of TeX to Unix, format files are usually installed
-under '/usr/local/share/texmf/web2c/' or '/var/lib/texmf/web2c/'; the
-environment variable is 'TEXFORMATS'.
+'texmf' tree or set an environment variable ('TEXFORMATS' to tell TeX
+how to find it.  You'll need to consult your distribution's
+documentation about that.
 
 
 File: eplain.info,  Node: Invoking Eplain,  Next: User definitions,  Prev: Installation,  Up: Top
@@ -355,30 +168,28 @@
 
      \input eplain
 
-at the beginning of your input file.  The macro file is small enough
-that reading it does not take an unbearably long time--at least on
-contemporary machines.
+at the beginning of your (plain TeX) input file.  The macro file is
+small enough that reading it does not take long.
 
-   In addition, if a format ('.fmt') file has been created for Eplain
-(see the previous section), you can eliminate the time spent reading the
+   However, if a format ('.fmt') file has been created for Eplain (see
+the previous section), you can eliminate even the time spent reading the
 macro source file.  You do this by responding '&eplain' to TeX's '**'
 prompt.  For example:
 
-     initex
+     $ tex
      This is TeX, ...
      **&eplain myfile
 
-   Depending on the implementation of TeX which you are using, you might
-also be able to invoke TeX as 'eplain' and have the format file
-automatically read.
+   In TeX Live and other distributions, a command-line executable named
+'eplain' is provided which reads the 'eplain.fmt' file automatically.
 
    If you write something which you will be distributing to others, you
 won't know if the Eplain format will be loaded already.  If it is, then
 doing '\input eplain' will waste time; if it isn't, then you must load
 it.  To solve this, Eplain defines the control sequence '\eplain' to be
-the letter 't' (a convention borrowed from Lisp; it doesn't actually
-matter what the definition is, only that the definition exists).
-Therefore, you can do the following:
+the letter 't' (a convention borrowed from Lisp; it doesn't matter what
+the definition is, only that the definition exists).  Therefore, you can
+do the following:
 
      \ifx\eplain\undefined \input eplain \fi
 
@@ -395,9 +206,10 @@
 'btxmac.tex'
      bibliography-related macros (*note Citations::);
 
-'ifpdf.sty'
-     sets the switch '\ifpdf', which can be used to detect pdfTeX in PDF
-     mode (*note Checking for PDF output::), written by Heiko Oberdiek;
+'iftex.sty'
+     sets the switch '\ifpdf' (among other things), which can be used to
+     detect direct PDF output (*note Checking for PDF output::),
+     originally written by Heiko Oberdiek;
 
 'path.sty'
      macro for allowing line breaks at punctuation characters within
@@ -426,7 +238,7 @@
      \let\nobibtex = t
      \input eplain
 
-By default, '\nobibtex' is undefined, and so the bibliography
+By default, '\nobibtex' is not defined, and so the bibliography
 definitions _are_ made.
 
    Likewise, define '\noarrow' if you don't want to include the
@@ -451,17 +263,18 @@
    Sometimes you may need to run TeX more then once on your '.tex' file
 in order to produce and typeset indexes, resolve undefined
 cross-references and/or citations.  The shell script 'texi2dvi' from the
-Texinfo documentation system (see <http://www.gnu.org/software/texinfo>)
-can automate this process: it runs BibTeX, MakeIndex and TeX as many
-times as needed to complete the compilation process.  You will need to
-set the 'LATEX' environment variable to 'tex'.  For example, in a
-Bourne-compatible shell, the following command will do all the work:
+Texinfo documentation system (see
+<https://www.gnu.org/software/texinfo>) can automate this process: it
+runs BibTeX, MakeIndex and TeX as many times as needed to complete the
+compilation process.  You will need to set the 'LATEX' environment
+variable to 'tex'.  For example, in a Bourne-compatible shell, the
+following command will do all the work:
 
-     prompt$ LATEX=tex texi2dvi file.tex
+     $ LATEX=tex texi2dvi file.tex
 
-(Despite the name, 'texi2dvi' can also produce '.pdf' files; just set
-'LATEX=pdftex'.)  See the output from the command 'texi2dvi --help' for
-invoking information and a full list of options.
+Despite the name, 'texi2dvi' can also produce '.pdf' output (among other
+formats); set 'LATEX=pdftex' for this.  See the output from 'texi2dvi
+--help' for a full list of options.
 
 
 File: eplain.info,  Node: User definitions,  Next: Hyperlinks,  Prev: Invoking Eplain,  Up: Top
@@ -1582,8 +1395,8 @@
        #1\char\subref
      }
 
-Sadly, we must define a new count register, '\subref', instead of using
-the scratch count register '\count255', because '#1' might include other
+We must define a new count register, '\subref', instead of using the
+scratch count register '\count255', because '#1' might include other
 macro calls which use '\count255'.
 
 
@@ -2109,7 +1922,7 @@
 name of the '.idx' file is 'myfile.idx' and the 'trimsee' script is
 placed in the current directory):
 
-     prompt$ cat myfile.idx | makeindex | ./trimsee > myfile.ind
+     $ cat myfile.idx | makeindex | ./trimsee >myfile.ind
 
    By default, 'trimsee' uses default page list separators and default
 "see ..." command names. If you set up MakeIndex to use different page
@@ -2502,8 +2315,9 @@
 Some spelling variants of these are also supported.
 
    Most of these macros come from 'texnames.sty', compiled by Nelson
-Beebe and available at <http://mirror.ctan.org/info/biblio/texnames.sty>
-(part of the 'biblio' package, <https://ctan.org/pkg/biblio>).
+Beebe and available at
+<https://mirror.ctan.org/info/biblio/texnames.sty> (part of the 'biblio'
+package, <https://ctan.org/pkg/biblio>).
 
 
 File: eplain.info,  Node: Boxes,  Next: Checking for PDF output,  Prev: Logos,  Up: User definitions
@@ -2594,7 +2408,8 @@
 'miniltx.tex' (<https://ctan.org/pkg/miniltx>) from the LaTeX graphics
 collection, written by David Carlisle and Sebastian Rahtz. Eplain
 extends 'miniltx.tex' to provide (primarily) support for package
-options.
+options; in many cases, you can use 'miniltx.tex' directly without
+loading Eplain at all.
 
 * Menu:
 
@@ -2720,8 +2535,8 @@
      system for TeX) installed on your system. The problem was fixed in
      'supp-mis.tex' version 2004.10.26. You can obtain up-to-date
      versions of 'supp-mis.tex' and the accompanying 'supp-pdf.tex' from
-     <http://mirror.ctan.org/macros/pdftex/graphics>. To convince TeX to
-     use the new files, you have the following options:
+     <https://mirror.ctan.org/macros/pdftex/graphics>. To convince TeX
+     to use the new files, you have the following options:
 
        1. put the new files in the same directory with your document;
 
@@ -2730,8 +2545,7 @@
 
        3. install the new 'supp-mis.tex' and 'supp-pdf.tex' files in the
           relevant subdirectory of your local 'texmf' tree (for info on
-          TeX directory structure see <https://tug.org/tds/> and
-          <http://www.tex.ac.uk/cgi-bin/texfaq2html?label=tds>);
+          TeX directory structure, see <https://tug.org/tds/>);
 
        4. upgrade your ConTeXt installation.
 
@@ -2747,7 +2561,7 @@
      command from the 'color.sty' package under pdfTeX, the cause may be
      an outdated pdfTeX color and graphics driver 'pdftex.def'. The
      problem was fixed in 'pdftex.def' version 0.03p. You can obtain an
-     up-to-date version from <http://ctan.org/pkg/pdftex-def>.
+     up-to-date version from <https://ctan.org/pkg/graphics-def>.
      *End of warning 2.*
 
      The '\fcolorbox' macro provided by the 'color' package requires the
@@ -2906,7 +2720,7 @@
    The knowledge about the commands that the various processors
 understand is programmed into Eplain's hyperlink drivers. Eplain
 provides three drivers: 'hypertex' (implementation of the HyperTeX
-standard, see <http://arxiv.org/hypertex>), and 'pdftex' and 'dvipdfm'
+standard, see <https://arxiv.org/hypertex>), and 'pdftex' and 'dvipdfm'
 (named after the programs which process the hyperlink commands, pdfTeX
 and dvipdfm). Therefore, Eplain can only produce HyperTeX commands and
 hyperlink commands for one of these two programs--except that the
@@ -3167,7 +2981,7 @@
 
      \enablehyperlinks
 
-     \url{http://foo/bar}
+     \url{https://foo/bar}
 
      \url{mailto:foobar at example.org}
 
@@ -3186,7 +3000,7 @@
      \enablehyperlinks
      \hlopts{bwidth=0}
 
-     \url{http://foo/bar}
+     \url{https://foo/bar}
 
      \url{mailto:foobar at example.org}
 
@@ -3378,7 +3192,7 @@
 the hyperlink label but identical otherwise. You should process the
 '.idx' with this script before passing it on to MakeIndex. For example:
 
-     prompt$ ./idxuniq file.idx | makeindex > file.ind
+     $ ./idxuniq file.idx | makeindex >file.ind
 
 Still, this solution is not ideal, as the page-range formation ability
 of MakeIndex will not work, and there will be problems of apparently
@@ -3619,7 +3433,7 @@
 ---------------------------------
 
 HyperTeX is a standard for inclusion of hyperlink information in TeX
-(and LaTeX) documents (see <http://arxiv.org/hypertex>). This standard
+(and LaTeX) documents (see <https://arxiv.org/hypertex>). This standard
 defines a set of hyperlink tags implemented as '\special' commands
 written into the DVI file. The major advantage of such standard is that
 a single '.dvi' file containing HyperTeX commands can be viewed by any
@@ -3639,8 +3453,8 @@
    For more information on programs which support the HyperTeX standard,
 please see
 
-     <http://arxiv.org/hypertex>
-     <http://mirror.ctan.org/support/hypertex/hypertex>
+     <https://arxiv.org/hypertex>
+     <https://mirror.ctan.org/support/hypertex/hypertex>
 
 For convenience, we list a few HyperTeX-enabled converters:
 
@@ -3651,9 +3465,9 @@
      Ghostscript. For example, if 'foo.tex' is a TeX file using HyperTeX
      commands, then
 
-          prompt$ tex foo.tex
-          prompt$ dvips -z foo.dvi -o
-          prompt$ ps2pdf foo.ps
+          $ tex foo.tex
+          $ dvips -z foo.dvi -o
+          $ ps2pdf foo.ps
 
      will produce 'foo.pdf' with hyperlinks.
 
@@ -5138,7 +4952,39 @@
      \innerdef\innerproclaim{proclaim}
      \innerinnerdef{proclaim}
 
+* Menu:
+
+* Scratch registers::
+
 
+File: eplain.info,  Node: Scratch registers,  Up: Allocation macros
+
+7.2.1 Scratch registers
+-----------------------
+
+It seems worth reiterating here the conventions for scratch registers
+defined by Knuth for plain TeX, which Eplain inherits and does not
+change.
+
+   * Registers numbered 0 to 9, and 255, are free for any use. Thus
+     their values must be assumed to be clobbered whenever another macro
+     might get control. Eplain macros do use the scratch registers.
+
+   * First exception: the '\count' registers '0..9' are used internally
+     by TeX for page numbering and thus are not available for any other
+     use.
+
+   * Second exception: the '\box255' register is likewise internally by
+     TeX, to ship out pages. So it's not available either.
+
+   * By convention, all assignments to the scratch registers 1, 3, 5, 7,
+     and 9 should be '\global', and assignments to the others should be
+     non-'\global'.
+
+   For more details on all aspects of register usage, see 'The TeXbook'
+or any other plain TeX reference.
+
+
 File: eplain.info,  Node: Iteration,  Next: Macro arguments,  Prev: Allocation macros,  Up: Programming definitions
 
 7.3 Iteration
@@ -5555,7 +5401,7 @@
 math mode).
 
    These macros come from the TeX Frequently Asked Questions
-(<http://www.tex.ac.uk/cgi-bin/texfaq2html>).
+(<https://texfaq.org>).
 
 
 File: eplain.info,  Node: \futurenonspacelet,  Prev: \ifinteger and \isinteger,  Up: Expansion
@@ -5760,6 +5606,7 @@
 
  [image src="xhyper.jpg" ]
 
+
 % (This file is public domain.)
 %
 % This file demonstrates the following features of Eplain:
@@ -5959,6 +5806,7 @@
 
  [image src="lscommnt.jpg" ]
 
+
 % (This file is public domain.)
 % Demonstrate how Eplain can be used to include a TeX source file
 % verbatim, typesetting comments in colored italic typewriter type.
@@ -6029,8 +5877,8 @@
                                                               (line  28)
 * abovecolumnskip:                       Multiple columns.    (line  33)
 * abovecolumnspenalty:                   Tables.              (line  30)
-* abovelistpenalty:                      Formatting lists.    (line  29)
-* abovelistskip:                         Formatting lists.    (line  29)
+* abovelistpenalty:                      Formatting lists.    (line  28)
+* abovelistskip:                         Formatting lists.    (line  28)
 * abovelistskipamount:                   Formatting lists.    (line  10)
 * adjarrow:                              Arrows and morphisms.
                                                               (line 113)
@@ -6078,7 +5926,7 @@
                                                               (line  22)
 * beginindex hook:                       Typesetting an index.
                                                               (line  30)
-* beginlist:                             Formatting lists.    (line  50)
+* beginlist:                             Formatting lists.    (line  49)
 * beginpackages:                         Environment for loading packages.
                                                               (line   6)
 * begin{picture}:                        Packages known to work.
@@ -6087,7 +5935,7 @@
                                                               (line  17)
 * belowcolumnskip:                       Multiple columns.    (line  34)
 * belowfootnoterulespace:                Footnotes.           (line  46)
-* belowlistskip:                         Formatting lists.    (line  30)
+* belowlistskip:                         Formatting lists.    (line  29)
 * belowlistskipamount:                   Formatting lists.    (line  10)
 * biarrow:                               Arrows and morphisms.
                                                               (line 110)
@@ -6159,7 +6007,7 @@
 * cmd (hyperlink option) <2>:            Link types for pdftex and dvipdfm.
                                                               (line  67)
 * cmd (hyperlink option) <3>:            Link options for pdftex and dvipdfm.
-                                                              (line  56)
+                                                              (line  55)
 * color (hyperlink option):              Options supported by all drivers.
                                                               (line  37)
 * colormodel (hyperlink option):         Options supported by all drivers.
@@ -6173,7 +6021,7 @@
                                                               (line  43)
 * csn:                                   \csn and \ece.       (line   6)
 * definecolor:                           Hyperlinks (xhyper.tex).
-                                                              (line   7)
+                                                              (line   8)
 * definecontentsfile:                    Alternative contents files.
                                                               (line   6)
 * defineindex:                           Indexing.            (line  35)
@@ -6180,7 +6028,7 @@
 * definexref:                            Defining generic references.
                                                               (line   6)
 * definexref <1>:                        Hyperlinks (xhyper.tex).
-                                                              (line   7)
+                                                              (line   8)
 * definexref (hyperlinks):               Cross-reference hyperlinks.
                                                               (line   6)
 * depth (destination option):            Destination types for pdftex and dvipdfm.
@@ -6188,7 +6036,7 @@
 * depth (destination option) <1>:        Destination options for pdftex and dvipdfm.
                                                               (line  34)
 * depth (hyperlink option):              Link options for pdftex and dvipdfm.
-                                                              (line 122)
+                                                              (line 121)
 * discretionaries:                       Paths.               (line  20)
 * displaylines:                          Displays.            (line  18)
 * DOCVIEW pdfmark:                       Making PDF outlines. (line  37)
@@ -6214,7 +6062,7 @@
                                                               (line  48)
 * end for index entries:                 Modifying index entries.
                                                               (line  22)
-* endlist:                               Formatting lists.    (line  52)
+* endlist:                               Formatting lists.    (line  51)
 * endnumberedlist:                       Lists.               (line  13)
 * endorderedlist:                        Lists.               (line  13)
 * endpackages:                           Environment for loading packages.
@@ -6224,7 +6072,7 @@
                                                               (line  14)
 * end{theindex}:                         Typesetting an index.
                                                               (line  17)
-* eplain:                                Invoking Eplain.     (line  30)
+* eplain:                                Invoking Eplain.     (line  28)
 * eplaininput:                           Environment for loading packages.
                                                               (line  24)
 * eqalignno:                             Displays.            (line  18)
@@ -6279,7 +6127,7 @@
 * file (hyperlink option) <3>:           Link types for pdftex and dvipdfm.
                                                               (line  53)
 * file (hyperlink option) <4>:           Link options for pdftex and dvipdfm.
-                                                              (line  63)
+                                                              (line  62)
 * fileexists (conditional):              Auxiliary files.     (line  10)
 * filename (hyperlink type):             Link types for hypertex.
                                                               (line  21)
@@ -6303,7 +6151,7 @@
                                                               (line  31)
 * flushleft:                             Justification.       (line   7)
 * flushright:                            Justification.       (line   7)
-* fmtversion:                            Introduction.        (line  51)
+* fmtversion:                            Introduction.        (line  49)
 * footnote (hyperlinks):                 Footnote hyperlinks. (line   7)
 * footnotemarkseparation:                Footnotes.           (line  25)
 * footnoteruleheight:                    Footnotes.           (line  44)
@@ -6335,7 +6183,7 @@
 * height (destination option) <1>:       Destination options for pdftex and dvipdfm.
                                                               (line  37)
 * height (hyperlink option):             Link options for pdftex and dvipdfm.
-                                                              (line 125)
+                                                              (line 124)
 * hgrid:                                 Construction of commutative diagrams.
                                                               (line 108)
 * hgrid <1>:                             Commutative diagram parameters.
@@ -6358,15 +6206,15 @@
 * hldestopts <1>:                        Setting group options.
                                                               (line  10)
 * hldestopts <2>:                        Hyperlinks (xhyper.tex).
-                                                              (line   7)
+                                                              (line   8)
 * hldesttype:                            Setting default types and options.
                                                               (line   6)
 * hldesttype <1>:                        Setting group types. (line   6)
 * hldesttype <2>:                        Hyperlinks (xhyper.tex).
-                                                              (line   7)
+                                                              (line   8)
 * hlend:                                 Explicit hyperlinks. (line  25)
 * hlend <1>:                             Hyperlinks (xhyper.tex).
-                                                              (line   7)
+                                                              (line   8)
 * hlfootbacklabel:                       Footnote hyperlinks. (line  12)
 * hlfootlabel:                           Footnote hyperlinks. (line  12)
 * hlfootlabelnumber:                     Footnote hyperlinks. (line  15)
@@ -6383,9 +6231,9 @@
 * hlidxpagelabel:                        Page destinations for index terms.
                                                               (line  11)
 * hlight (hyperlink option):             Link options for pdftex and dvipdfm.
-                                                              (line  69)
+                                                              (line  68)
 * hlightcommentslisting:                 Highlighting TeX comments in listings (lscommnt.tex).
-                                                              (line   7)
+                                                              (line   8)
 * hline:                                 Arrows and morphisms.
                                                               (line  54)
 * hloff:                                 Hyperlink driver nolinks.
@@ -6399,7 +6247,7 @@
 * hlopts <1>:                            Setting group options.
                                                               (line  10)
 * hlopts <2>:                            Hyperlinks (xhyper.tex).
-                                                              (line   7)
+                                                              (line   8)
 * hlstart:                               Explicit hyperlinks. (line  25)
 * hlstart <1>:                           Link types for hypertex.
                                                               (line  43)
@@ -6408,7 +6256,7 @@
 * hlstart <3>:                           Setting hyperlink types and options.
                                                               (line   7)
 * hlstart <4>:                           Hyperlinks (xhyper.tex).
-                                                              (line   7)
+                                                              (line   8)
 * hltype:                                Setting default types and options.
                                                               (line   6)
 * hltype <1>:                            Setting group types. (line   6)
@@ -6515,7 +6363,7 @@
                                                               (line  26)
 * ifundefined:                           \ifundefined.        (line   6)
 * includegraphics:                       Hyperlinks (xhyper.tex).
-                                                              (line   7)
+                                                              (line   8)
 * indexfilebasename:                     Typesetting an index.
                                                               (line  11)
 * indexfonts:                            Typesetting an index.
@@ -6567,14 +6415,14 @@
 * insidemargin:                          Proofing index terms.
                                                               (line  21)
 * interfootnoteskip:                     Footnotes.           (line  29)
-* interitemskip:                         Formatting lists.    (line  30)
+* interitemskip:                         Formatting lists.    (line  29)
 * interitemskipamount:                   Formatting lists.    (line  14)
 * isinteger:                             \ifinteger and \isinteger.
                                                               (line  13)
 * item in indexes:                       Typesetting an index.
                                                               (line  35)
-* itemletter:                            Formatting lists.    (line  44)
-* itemnumber:                            Formatting lists.    (line  44)
+* itemletter:                            Formatting lists.    (line  43)
+* itemnumber:                            Formatting lists.    (line  43)
 * ituline:                               Page list and page range parsers.
                                                               (line  26)
 * jobname:                               Citations.           (line  17)
@@ -6611,14 +6459,14 @@
 * li (hyperlinks):                       List hyperlinks.     (line   6)
 * linenumberedlisting:                   Verbatim listing.    (line  17)
 * linenumberedlisting <1>:               Highlighting TeX comments in listings (lscommnt.tex).
-                                                              (line   7)
+                                                              (line   8)
 * listcompact:                           Lists.               (line  38)
 * listing:                               Verbatim listing.    (line   7)
 * listing <1>:                           Highlighting TeX comments in listings (lscommnt.tex).
-                                                              (line   7)
+                                                              (line   8)
 * listingfont:                           Verbatim listing.    (line  10)
 * listleftindent:                        Formatting lists.    (line  18)
-* listmarkerspace:                       Formatting lists.    (line  33)
+* listmarkerspace:                       Formatting lists.    (line  32)
 * listrightindent:                       Formatting lists.    (line  18)
 * loggingall:                            Diagnostics.         (line  11)
 * loop:                                  Iteration.           (line  40)
@@ -6665,15 +6513,15 @@
 * newwin (hyperlink option) <1>:         Link types for pdftex and dvipdfm.
                                                               (line  54)
 * newwin (hyperlink option) <2>:         Link options for pdftex and dvipdfm.
-                                                              (line  90)
+                                                              (line  89)
 * new...:                                Allocation macros.   (line   8)
-* noarrow:                               Invoking Eplain.     (line  84)
-* noauxfile:                             Invoking Eplain.     (line  89)
-* nobibtex:                              Invoking Eplain.     (line  73)
+* noarrow:                               Invoking Eplain.     (line  83)
+* noauxfile:                             Invoking Eplain.     (line  88)
+* nobibtex:                              Invoking Eplain.     (line  72)
 * nocite:                                Citations.           (line  58)
 * nolastlinelisting:                     Verbatim listing.    (line  25)
 * nolastlinelisting <1>:                 Highlighting TeX comments in listings (lscommnt.tex).
-                                                              (line   7)
+                                                              (line   8)
 * nolinks (hyperlink driver):            Hyperlink driver nolinks.
                                                               (line   6)
 * normalbaselineskip:                    Options supported by all drivers.
@@ -6683,8 +6531,8 @@
 * numberedfootnote:                      Footnotes.           (line   7)
 * numberedfootnote (hyperlinks):         Footnote hyperlinks. (line   6)
 * numberedlist:                          Lists.               (line  13)
-* numberedlistdepth:                     Formatting lists.    (line  41)
-* numberedmarker:                        Formatting lists.    (line  37)
+* numberedlistdepth:                     Formatting lists.    (line  40)
+* numberedmarker:                        Formatting lists.    (line  36)
 * numbername:                            Writing out numbers. (line   6)
 * obeywhitespace:                        Obeying spaces.      (line   6)
 * orderedlist:                           Lists.               (line  13)
@@ -6701,7 +6549,7 @@
 * pagefit (hyperlink option) <2>:        Link types for pdftex and dvipdfm.
                                                               (line  54)
 * pagefit (hyperlink option) <3>:        Link options for pdftex and dvipdfm.
-                                                              (line 107)
+                                                              (line 106)
 * pageno:                                Proofing index terms.
                                                               (line  21)
 * pagetotal:                             Multiple columns.    (line  14)
@@ -6732,7 +6580,7 @@
                                                               (line  26)
 * printcitestart:                        Formatting citations.
                                                               (line  15)
-* printitem:                             Formatting lists.    (line  51)
+* printitem:                             Formatting lists.    (line  50)
 * printlistinglineno:                    Verbatim listing.    (line  19)
 * printlistinglineno <1>:                Verbatim listing.    (line  27)
 * providecommand:                        Commands from LaTeX. (line  18)
@@ -6763,7 +6611,7 @@
 * ref:                                   Using generic references.
                                                               (line  16)
 * ref <1>:                               Hyperlinks (xhyper.tex).
-                                                              (line   7)
+                                                              (line   8)
 * ref (hyperlinks):                      Cross-reference hyperlinks.
                                                               (line  19)
 * refn:                                  Using generic references.
@@ -6798,7 +6646,7 @@
 * righteqnumbers:                        Displays.            (line  23)
 * rightmargin:                           Margins.             (line  17)
 * rotatebox:                             Hyperlinks (xhyper.tex).
-                                                              (line   7)
+                                                              (line   8)
 * rt:                                    Arrows and morphisms.
                                                               (line  14)
 * sanitize:                              Converting to characters.
@@ -6823,7 +6671,7 @@
 * setproperty:                           Properties.          (line  13)
 * setuplistinghook:                      Verbatim listing.    (line  13)
 * setuplistinghook <1>:                  Highlighting TeX comments in listings (lscommnt.tex).
-                                                              (line   7)
+                                                              (line   8)
 * sidx:                                  Indexing commands.   (line   8)
 * sidxmarked:                            Indexing commands.   (line  29)
 * sidxname:                              Indexing commands.   (line  19)
@@ -6873,16 +6721,16 @@
 * tracingoff:                            Diagnostics.         (line  18)
 * triplecolumns:                         Multiple columns.    (line   7)
 * tt:                                    Packages known to work.
-                                                              (line  90)
+                                                              (line  87)
 * ttfamily:                              Packages known to work.
-                                                              (line  86)
+                                                              (line  84)
 * uncatcodespecials:                     Verbatim listing.    (line  57)
 * uncatcodespecials <1>:                 Category codes.      (line  49)
 * unorderedlist:                         Lists.               (line  20)
-* unorderedlistdepth:                    Formatting lists.    (line  41)
-* unorderedmarker:                       Formatting lists.    (line  37)
+* unorderedlistdepth:                    Formatting lists.    (line  40)
+* unorderedmarker:                       Formatting lists.    (line  36)
 * url:                                   Hyperlinks (xhyper.tex).
-                                                              (line   7)
+                                                              (line   8)
 * url (hyperlink type):                  Link types for hypertex.
                                                               (line  14)
 * url (hyperlink type) <1>:              Link types for pdftex and dvipdfm.
@@ -6932,7 +6780,7 @@
 * width (destination option) <1>:        Destination options for pdftex and dvipdfm.
                                                               (line  40)
 * width (hyperlink option):              Link options for pdftex and dvipdfm.
-                                                              (line 128)
+                                                              (line 127)
 * writenumberedtocentry:                 Writing the .toc file.
                                                               (line  13)
 * writenumberedtocline:                  Writing the .toc file.
@@ -6951,7 +6799,7 @@
                                                               (line  10)
 * xrefn (hyperlinks):                    Cross-reference hyperlinks.
                                                               (line  14)
-* xrefpageword:                          Page references.     (line  18)
+* xrefpageword:                          Page references.     (line  17)
 * xrefpageword <1>:                      Page reference hyperlinks.
                                                               (line  10)
 * xrefwarning conditional:               Using generic references.
@@ -6987,11 +6835,11 @@
 * .cls files:                            Loading LaTeX packages.
                                                               (line   6)
 * .eps files:                            Packages known to work.
-                                                              (line 103)
+                                                              (line 100)
 * .eps files <1>:                        Packages known to work.
-                                                              (line 112)
-* .fmt file:                             Installation.        (line  27)
-* .fmt file <1>:                         Invoking Eplain.     (line  14)
+                                                              (line 109)
+* .fmt file:                             Installation.        (line  18)
+* .fmt file <1>:                         Invoking Eplain.     (line  13)
 * .idx files:                            Indexing.            (line  22)
 * .idx files <1>:                        Index hyperlinks.    (line  14)
 * .ind files:                            Indexing.            (line  26)
@@ -6999,7 +6847,7 @@
 * .pdf files:                            Checking for PDF output.
                                                               (line   6)
 * .pdf files <1>:                        Packages known to work.
-                                                              (line 103)
+                                                              (line 100)
 * .pdf files <2>:                        Introduction to hyperlinks.
                                                               (line  13)
 * .ps files:                             Introduction to hyperlinks.
@@ -7015,9 +6863,9 @@
 * allocation macros:                     Allocation macros.   (line   6)
 * alphanumeric references:               Citations.           (line 128)
 * AMSLaTeX:                              Logos.               (line  10)
-* amsppt.sty:                            Invoking Eplain.     (line  92)
+* amsppt.sty:                            Invoking Eplain.     (line  91)
 * AMSTeX:                                Logos.               (line  10)
-* AMSTeX conflicts:                      Invoking Eplain.     (line  92)
+* AMSTeX conflicts:                      Invoking Eplain.     (line  91)
 * arguments, ignoring:                   Macro arguments.     (line   6)
 * arrows:                                Arrows and morphisms.
                                                               (line   6)
@@ -7041,7 +6889,7 @@
 * bibliography, formatting the:          Formatting bibliographies.
                                                               (line   6)
 * bibliography, hyperlinks:              Citation hyperlinks. (line  11)
-* bibtex:                                Invoking Eplain.     (line 103)
+* bibtex:                                Invoking Eplain.     (line 102)
 * BibTeX:                                Citations.           (line   9)
 * BibTeX <1>:                            Logos.               (line  10)
 * black boxes:                           Boxes.               (line   6)
@@ -7089,7 +6937,7 @@
 * color:                                 Packages known to work.
                                                               (line  25)
 * color, demo:                           Hyperlinks (xhyper.tex).
-                                                              (line   7)
+                                                              (line   8)
 * color, hyperlink border:               Link options for pdftex and dvipdfm.
                                                               (line  13)
 * color, hyperlinks:                     URL hyperlinks.      (line  17)
@@ -7107,7 +6955,7 @@
 * color.sty <3>:                         Setting default types and options.
                                                               (line  27)
 * color.sty <4>:                         Hyperlinks (xhyper.tex).
-                                                              (line   7)
+                                                              (line   8)
 * colored links:                         URL hyperlinks.      (line  17)
 * colored links <1>:                     Options supported by all drivers.
                                                               (line  37)
@@ -7120,7 +6968,7 @@
 * commas in cross-referencing index entries: Customizing indexing.
                                                               (line  62)
 * comments, highlighting in listings:    Highlighting TeX comments in listings (lscommnt.tex).
-                                                              (line   7)
+                                                              (line   8)
 * commutative diagrams:                  Commutative diagrams.
                                                               (line   6)
 * contents:                              Contents.            (line   6)
@@ -7139,7 +6987,7 @@
 * cross-references, defining general <1>: Using generic references.
                                                               (line   6)
 * cross-references, demo:                Hyperlinks (xhyper.tex).
-                                                              (line   7)
+                                                              (line   8)
 * cross-references, hyperlinks:          Cross-reference hyperlinks.
                                                               (line   6)
 * cross-referencing index entries:       Modifying index entries.
@@ -7174,12 +7022,12 @@
 * destgroup options <1>:                 Setting group options.
                                                               (line   6)
 * destgroup options, demo:               Hyperlinks (xhyper.tex).
-                                                              (line   7)
+                                                              (line   8)
 * destgroup type:                        Setting hyperlink types and options.
                                                               (line  12)
 * destgroup type <1>:                    Setting group types. (line   6)
 * destgroup type, demo:                  Hyperlinks (xhyper.tex).
-                                                              (line   7)
+                                                              (line   8)
 * destgroup 'bib':                       Citation hyperlinks. (line  11)
 * destgroup 'definexref':                Cross-reference hyperlinks.
                                                               (line   6)
@@ -7239,12 +7087,12 @@
 * destinations, group options <1>:       Setting group options.
                                                               (line   6)
 * destinations, group options, demo:     Hyperlinks (xhyper.tex).
-                                                              (line   7)
+                                                              (line   8)
 * destinations, group type:              Setting hyperlink types and options.
                                                               (line  12)
 * destinations, group type <1>:          Setting group types. (line   6)
 * destinations, group type, demo:        Hyperlinks (xhyper.tex).
-                                                              (line   7)
+                                                              (line   8)
 * destinations, in another file:         Link types for hypertex.
                                                               (line  21)
 * destinations, in another file <1>:     Link types for pdftex and dvipdfm.
@@ -7277,11 +7125,11 @@
 * Diagram, macros for LaTeX:             Construction of commutative diagrams.
                                                               (line  79)
 * dimensions, hyperlink:                 Link options for pdftex and dvipdfm.
-                                                              (line 122)
+                                                              (line 121)
 * dimensions, hyperlink <1>:             Link options for pdftex and dvipdfm.
-                                                              (line 125)
+                                                              (line 124)
 * dimensions, hyperlink <2>:             Link options for pdftex and dvipdfm.
-                                                              (line 128)
+                                                              (line 127)
 * dimensions, hyperlink destination:     Destination options for pdftex and dvipdfm.
                                                               (line  34)
 * dimensions, hyperlink destination <1>: Destination options for pdftex and dvipdfm.
@@ -7311,7 +7159,7 @@
                                                               (line  24)
 * do...while loops:                      Iteration.           (line   6)
 * draft, option for graphics.sty:        Packages known to work.
-                                                              (line  82)
+                                                              (line  80)
 * driver dvipdfm:                        Hyperlink drivers pdftex and dvipdfm.
                                                               (line   6)
 * driver hypertex:                       Hyperlink driver hypertex.
@@ -7347,15 +7195,15 @@
 * eject in multicolumns:                 Multiple columns.    (line  14)
 * electronic mail addresses, breaking:   Paths.               (line   6)
 * electronic mail addresses, breaking <1>: Packages known to work.
-                                                              (line 133)
+                                                              (line 130)
 * empty argument, checking for:          \ifempty.            (line   6)
 * empty equation labels:                 Equation references. (line  22)
 * empty equation labels, referring to:   Equation references. (line  27)
 * empty string, checking for:            \ifempty.            (line   6)
 * Encapsulated PostScript:               Packages known to work.
-                                                              (line 103)
+                                                              (line 100)
 * Encapsulated PostScript <1>:           Packages known to work.
-                                                              (line 112)
+                                                              (line 109)
 * environments, user-defined:            User-defined environments.
                                                               (line   6)
 * Eplain, installing:                    Installation.        (line   6)
@@ -7362,16 +7210,16 @@
 * Eplain, invoking:                      Invoking Eplain.     (line   6)
 * Eplain, purpose of:                    Introduction.        (line   6)
 * Eplain, upgrading:                     Installation.        (line   6)
-* eplain.aux:                            Installation.        (line  40)
-* eplain.fmt:                            Installation.        (line  27)
+* eplain.aux:                            Installation.        (line  29)
+* eplain.fmt:                            Installation.        (line  18)
 * EPS:                                   Packages known to work.
-                                                              (line 103)
+                                                              (line 100)
 * EPS <1>:                               Packages known to work.
-                                                              (line 112)
+                                                              (line 109)
 * epstopdf:                              Packages known to work.
-                                                              (line 103)
+                                                              (line 100)
 * epstopdf.sty:                          Packages known to work.
-                                                              (line 101)
+                                                              (line  98)
 * equation labels, characters valid in:  Equation references. (line  54)
 * equation numbers, formatting of:       Formatting equation references.
                                                               (line   6)
@@ -7393,7 +7241,7 @@
 * expansion, one-level:                  \expandonce.         (line   6)
 * explicit hyperlinks:                   Explicit hyperlinks. (line   6)
 * explicit hyperlinks, demo:             Hyperlinks (xhyper.tex).
-                                                              (line   7)
+                                                              (line   8)
 * ExTeX:                                 Logos.               (line  10)
 * file, hyperlink to:                    Link types for hypertex.
                                                               (line  21)
@@ -7404,10 +7252,10 @@
 * file: links:                           General hyperlinks.  (line  37)
 * filenames, breaking:                   Paths.               (line   6)
 * filenames, breaking <1>:               Packages known to work.
-                                                              (line 133)
+                                                              (line 130)
 * files, verbatim listing of:            Verbatim listing.    (line   6)
 * files, verbatim listing of, demo:      Highlighting TeX comments in listings (lscommnt.tex).
-                                                              (line   7)
+                                                              (line   8)
 * filtering index entries with hyperlinks: Exact destinations for index terms.
                                                               (line  33)
 * footnotes, hyperlinks:                 Footnote hyperlinks. (line   6)
@@ -7415,7 +7263,7 @@
 * for loops:                             Iteration.           (line   6)
 * form feed character, and verbatim listing: Verbatim listing.
                                                               (line  30)
-* format file:                           Installation.        (line  27)
+* format file:                           Installation.        (line  18)
 * formatting index entries:              Typesetting an index.
                                                               (line  35)
 * fractions:                             Fractions.           (line   6)
@@ -7436,9 +7284,9 @@
 * graphics collection, LaTeX <2>:        Hyperlink driver nolinks.
                                                               (line  34)
 * graphics collection, LaTeX, demo:      Hyperlinks (xhyper.tex).
-                                                              (line   7)
+                                                              (line   8)
 * graphics, omitting typesetting of:     Packages known to work.
-                                                              (line  82)
+                                                              (line  80)
 * graphics, problems with pdfTeX:        Packages known to work.
                                                               (line  30)
 * graphics.sty:                          Packages known to work.
@@ -7446,7 +7294,7 @@
 * graphicx.sty:                          Packages known to work.
                                                               (line  23)
 * graphicx.sty <1>:                      Hyperlinks (xhyper.tex).
-                                                              (line   7)
+                                                              (line   8)
 * grid:                                  Construction of commutative diagrams.
                                                               (line  79)
 * group option list:                     Setting group options.
@@ -7456,12 +7304,12 @@
 * group options, hyperlink <1>:          Setting group options.
                                                               (line   6)
 * group options, hyperlink, demo:        Hyperlinks (xhyper.tex).
-                                                              (line   7)
+                                                              (line   8)
 * group type, hyperlink:                 Setting hyperlink types and options.
                                                               (line  12)
 * group type, hyperlink <1>:             Setting group types. (line   6)
 * group type, hyperlink, demo:           Hyperlinks (xhyper.tex).
-                                                              (line   7)
+                                                              (line   8)
 * group '' (empty):                      Setting group types. (line  17)
 * group '*':                             Setting group types. (line  26)
 * group 'bib':                           Citation hyperlinks. (line  11)
@@ -7498,11 +7346,11 @@
                                                               (line  41)
 * help messages:                         Diagnostics.         (line  24)
 * highlight modes, hyperlink:            Link options for pdftex and dvipdfm.
-                                                              (line  69)
+                                                              (line  68)
 * highlighting:                          Packages known to work.
-                                                              (line 123)
+                                                              (line 120)
 * highlighting, in listings:             Highlighting TeX comments in listings (lscommnt.tex).
-                                                              (line   7)
+                                                              (line   8)
 * hooks:                                 Hooks.               (line   6)
 * hyperlink border color:                Link options for pdftex and dvipdfm.
                                                               (line  13)
@@ -7538,11 +7386,11 @@
 * hyperlink destination, raising:        Options supported by all drivers.
                                                               (line  13)
 * hyperlink dimensions:                  Link options for pdftex and dvipdfm.
-                                                              (line 122)
+                                                              (line 121)
 * hyperlink dimensions <1>:              Link options for pdftex and dvipdfm.
-                                                              (line 125)
+                                                              (line 124)
 * hyperlink dimensions <2>:              Link options for pdftex and dvipdfm.
-                                                              (line 128)
+                                                              (line 127)
 * hyperlink driver dvipdfm:              Hyperlink drivers pdftex and dvipdfm.
                                                               (line   6)
 * hyperlink driver hypertex:             Hyperlink driver hypertex.
@@ -7576,7 +7424,7 @@
                                                               (line   6)
 * hyperlinks, default type <1>:          Setting group types. (line  17)
 * hyperlinks, demo:                      Hyperlinks (xhyper.tex).
-                                                              (line   7)
+                                                              (line   8)
 * hyperlinks, disabling:                 Hyperlink driver nolinks.
                                                               (line   6)
 * hyperlinks, disabling <1>:             Turning hyperlinks on/off.
@@ -7585,7 +7433,7 @@
                                                               (line   6)
 * hyperlinks, explicit:                  Explicit hyperlinks. (line   6)
 * hyperlinks, explicit, demo:            Hyperlinks (xhyper.tex).
-                                                              (line   7)
+                                                              (line   8)
 * hyperlinks, filtering index entries:   Exact destinations for index terms.
                                                               (line  33)
 * hyperlinks, footnotes:                 Footnote hyperlinks. (line   6)
@@ -7596,15 +7444,15 @@
 * hyperlinks, group options <1>:         Setting group options.
                                                               (line   6)
 * hyperlinks, group options, demo:       Hyperlinks (xhyper.tex).
-                                                              (line   7)
+                                                              (line   8)
 * hyperlinks, group type:                Setting hyperlink types and options.
                                                               (line  12)
 * hyperlinks, group type <1>:            Setting group types. (line   6)
 * hyperlinks, highlight mode:            Link options for pdftex and dvipdfm.
-                                                              (line  69)
+                                                              (line  68)
 * hyperlinks, implicit:                  Implicit hyperlinks. (line   6)
 * hyperlinks, implicit, demo:            Hyperlinks (xhyper.tex).
-                                                              (line   7)
+                                                              (line   8)
 * hyperlinks, index:                     Index hyperlinks.    (line   6)
 * hyperlinks, index destination placement: Choosing destination placement.
                                                               (line   6)
@@ -7616,7 +7464,7 @@
                                                               (line  33)
 * hyperlinks, lists:                     List hyperlinks.     (line   6)
 * hyperlinks, opening in a new window:   Link options for pdftex and dvipdfm.
-                                                              (line  90)
+                                                              (line  89)
 * hyperlinks, page references:           Page reference hyperlinks.
                                                               (line   6)
 * hyperlinks, preserving page-breaking:  Hyperlink driver nolinks.
@@ -7652,7 +7500,7 @@
                                                               (line   6)
 * hypertext links:                       Hyperlinks.          (line   6)
 * Höppner, Klaus:                        Packages known to work.
-                                                              (line  96)
+                                                              (line  93)
 * identifying numbers:                   \ifinteger and \isinteger.
                                                               (line   6)
 * idxuniq:                               Exact destinations for index terms.
@@ -7662,7 +7510,7 @@
 * ignoring arguments:                    Macro arguments.     (line   6)
 * implicit hyperlinks:                   Implicit hyperlinks. (line   6)
 * implicit hyperlinks, demo:             Hyperlinks (xhyper.tex).
-                                                              (line   7)
+                                                              (line   8)
 * inaccessible macros:                   Category codes.      (line  19)
 * index entries and ranges:              Modifying index entries.
                                                               (line  22)
@@ -7726,12 +7574,12 @@
                                                               (line   6)
 * italic correction:                     Formatting bibliographies.
                                                               (line  45)
-* item labels, changing:                 Formatting lists.    (line  53)
+* item labels, changing:                 Formatting lists.    (line  52)
 * iteration:                             Iteration.           (line   6)
 * justification:                         Justification.       (line   6)
 * Knuth, Donald Ervin:                   Citations.           (line  91)
 * Knuth, Donald Ervin <1>:               Category codes.      (line   7)
-* labels on items, changing:             Formatting lists.    (line  53)
+* labels on items, changing:             Formatting lists.    (line  52)
 * labels, characters valid in:           Cross-references.    (line  20)
 * labels, empty equation:                Equation references. (line  22)
 * labels, empty equation, referring to:  Equation references. (line  27)
@@ -7758,7 +7606,7 @@
 * LaTeX graphics collection <2>:         Hyperlink driver nolinks.
                                                               (line  34)
 * LaTeX graphics collection, demo:       Hyperlinks (xhyper.tex).
-                                                              (line   7)
+                                                              (line   8)
 * LaTeX packages:                        Loading LaTeX packages.
                                                               (line   6)
 * LaTeX packages <1>:                    Packages known to work.
@@ -7771,7 +7619,7 @@
 * left-justification:                    Justification.       (line   6)
 * left-justification of displays:        Displays.            (line   6)
 * letterspacing:                         Packages known to work.
-                                                              (line 123)
+                                                              (line 120)
 * linear systems theory:                 Construction of commutative diagrams.
                                                               (line  38)
 * lines:                                 Slanted lines and vectors.
@@ -7800,7 +7648,7 @@
 * link, group options <1>:               Setting group options.
                                                               (line   6)
 * link, group options, demo:             Hyperlinks (xhyper.tex).
-                                                              (line   7)
+                                                              (line   8)
 * link, group type:                      Setting hyperlink types and options.
                                                               (line  12)
 * link, group type <1>:                  Setting group types. (line   6)
@@ -7810,7 +7658,7 @@
 * linkgroup options <1>:                 Setting group options.
                                                               (line   6)
 * linkgroup options, demo:               Hyperlinks (xhyper.tex).
-                                                              (line   7)
+                                                              (line   8)
 * linkgroup type:                        Setting hyperlink types and options.
                                                               (line  12)
 * linkgroup type <1>:                    Setting group types. (line   6)
@@ -7836,7 +7684,7 @@
                                                               (line   6)
 * listing files:                         Verbatim listing.    (line   6)
 * listing files, demo:                   Highlighting TeX comments in listings (lscommnt.tex).
-                                                              (line   7)
+                                                              (line   8)
 * lists:                                 Lists.               (line   6)
 * lists, formatting:                     Formatting lists.    (line   6)
 * lists, hyperlinks:                     List hyperlinks.     (line   6)
@@ -7846,10 +7694,10 @@
 * lookahead without spaces:              \futurenonspacelet.  (line   6)
 * loops:                                 Iteration.           (line   6)
 * lscommnt.tex:                          Highlighting TeX comments in listings (lscommnt.tex).
-                                                              (line   7)
+                                                              (line   8)
 * magnification, hyperlink destination:  Destination options for pdftex and dvipdfm.
                                                               (line  21)
-* makeindex:                             Invoking Eplain.     (line 103)
+* makeindex:                             Invoking Eplain.     (line 102)
 * makeindex <1>:                         Indexing.            (line  14)
 * makeindex <2>:                         Index hyperlinks.    (line  12)
 * margins, changing:                     Margins.             (line   6)
@@ -7879,7 +7727,7 @@
                                                               (line  18)
 * names, of TeX variants:                Logos.               (line   6)
 * new window, opening hyperlink in:      Link options for pdftex and dvipdfm.
-                                                              (line  90)
+                                                              (line  89)
 * newlinechar:                           Diagnostics.         (line  26)
 * newlines, obeying:                     Obeying spaces.      (line   6)
 * nolinks, hyperlink driver:             Hyperlink driver nolinks.
@@ -7898,8 +7746,9 @@
 * omitting hyperlinks <1>:               Turning hyperlinks on/off.
                                                               (line   6)
 * omitting typesetting of graphics:      Packages known to work.
-                                                              (line  82)
+                                                              (line  80)
 * open boxes:                            Boxes.               (line  12)
+* OpTeX:                                 Introduction.        (line  70)
 * option list, group:                    Setting group options.
                                                               (line  48)
 * option list, preserving for group:     Setting group options.
@@ -7927,7 +7776,7 @@
 * output routine and index proofing:     Proofing index terms.
                                                               (line  28)
 * overstriking:                          Packages known to work.
-                                                              (line 123)
+                                                              (line 120)
 * packages, LaTeX:                       Loading LaTeX packages.
                                                               (line   6)
 * packages, LaTeX <1>:                   Packages known to work.
@@ -7949,9 +7798,9 @@
 * Patashnik, Oren:                       Citations.           (line   9)
 * pathnames, breaking:                   Paths.               (line   6)
 * pathnames, breaking <1>:               Packages known to work.
-                                                              (line 133)
+                                                              (line 130)
 * PDF:                                   Packages known to work.
-                                                              (line 103)
+                                                              (line 100)
 * PDF outlines (a.k.a. bookmarks):       Making PDF outlines. (line   6)
 * PDF output:                            Checking for PDF output.
                                                               (line   6)
@@ -7982,7 +7831,7 @@
 * picture mode <1>:                      Slanted lines and vectors.
                                                               (line   7)
 * Portable Document Format:              Packages known to work.
-                                                              (line 103)
+                                                              (line 100)
 * PostScript point:                      Destination types for pdftex and dvipdfm.
                                                               (line  66)
 * PostScript point <1>:                  Destination options for pdftex and dvipdfm.
@@ -7997,7 +7846,7 @@
 * ps2pdf <1>:                            Hyperlink driver hypertex.
                                                               (line  35)
 * psfrag.sty:                            Packages known to work.
-                                                              (line 110)
+                                                              (line 107)
 * quadruple column output:               Multiple columns.    (line   6)
 * Rahtz, Sebastian:                      Loading LaTeX packages.
                                                               (line  14)
@@ -8017,6 +7866,7 @@
                                                               (line   6)
 * references, numbered:                  Citations.           (line  91)
 * register allocation:                   Allocation macros.   (line   6)
+* registers, scratch:                    Scratch registers.   (line   6)
 * restoring \input, LaTeX packages:      Environment for loading packages.
                                                               (line  24)
 * return character:                      Category codes.      (line  40)
@@ -8025,13 +7875,14 @@
 * rotation:                              Packages known to work.
                                                               (line  25)
 * rotation, demo:                        Hyperlinks (xhyper.tex).
-                                                              (line   7)
+                                                              (line   8)
 * rule thickness:                        Rules.               (line   7)
 * run: links:                            General hyperlinks.  (line  38)
 * scaling:                               Packages known to work.
                                                               (line  25)
 * scaling, demo:                         Hyperlinks (xhyper.tex).
-                                                              (line   7)
+                                                              (line   8)
+* scratch registers:                     Scratch registers.   (line   6)
 * sed:                                   Customizing indexing.
                                                               (line  64)
 * see also index entries and hyperlinks: Hyperlinks in see and see also entries.
@@ -8055,7 +7906,7 @@
 * sorting an index:                      Indexing.            (line   6)
 * sorting of index entries:              Indexing commands.   (line  50)
 * soul.sty:                              Packages known to work.
-                                                              (line 121)
+                                                              (line 118)
 * space above index entries:             Typesetting an index.
                                                               (line  35)
 * spaces, ignoring:                      \futurenonspacelet.  (line   6)
@@ -8062,7 +7913,7 @@
 * spaces, obeying:                       Obeying spaces.      (line   6)
 * spaces, trailing and indexing commands: Indexing terms.     (line  20)
 * spacing out:                           Packages known to work.
-                                                              (line 123)
+                                                              (line 120)
 * spacing, preserving with hyperlinks:   Hyperlink driver nolinks.
                                                               (line   6)
 * special characters:                    Verbatim listing.    (line  57)
@@ -8072,7 +7923,7 @@
                                                               (line  49)
 * Stallman, Richard:                     Introduction.        (line  16)
 * striking out:                          Packages known to work.
-                                                              (line 123)
+                                                              (line 120)
 * style, hyperlink border:               Link options for pdftex and dvipdfm.
                                                               (line  25)
 * subequations, referring to:            Subequation references.
@@ -8094,12 +7945,12 @@
 * TeX by Topic:                          Iteration.           (line  61)
 * TeX Frequently Asked Questions:        \ifinteger and \isinteger.
                                                               (line  26)
-* TEXFORMATS:                            Installation.        (line  43)
-* texi2dvi:                              Invoking Eplain.     (line 103)
+* TEXFORMATS:                            Installation.        (line  32)
+* texi2dvi:                              Invoking Eplain.     (line 102)
 * texi2dvi <1>:                          Citations.           (line 102)
 * texi2dvi <2>:                          Indexing.            (line  32)
 * Texinfo:                               Introduction.        (line  15)
-* TEXINPUTS:                             Installation.        (line  23)
+* TEXINPUTS:                             Installation.        (line  15)
 * texnames.sty:                          Logos.               (line  15)
 * time of day:                           Time of day.         (line   6)
 * toc files, writing several:            Changing the .toc file's root name.
@@ -8111,7 +7962,7 @@
 * triple column output:                  Multiple columns.    (line   6)
 * Tu, Loring W.:                         Construction of commutative diagrams.
                                                               (line  13)
-* TUGboat:                               Introduction.        (line  65)
+* TUGboat:                               Introduction.        (line  59)
 * type, link and destination:            Introduction to hyperlinks.
                                                               (line  88)
 * types, destination, dvipdfm:           Destination types for pdftex and dvipdfm.
@@ -8129,11 +7980,11 @@
 * typesetting an index:                  Typesetting an index.
                                                               (line   6)
 * undefined control sequence, checking for: \ifundefined.     (line  10)
-* undefined labels, warnings about:      Installation.        (line  40)
+* undefined labels, warnings about:      Installation.        (line  29)
 * underline hyperlink border:            Link options for pdftex and dvipdfm.
                                                               (line  25)
 * underlining:                           Packages known to work.
-                                                              (line 123)
+                                                              (line 120)
 * underlining page numbers in index:     Page list and page range parsers.
                                                               (line  26)
 * universal mapping property:            Construction of commutative diagrams.
@@ -8150,22 +8001,22 @@
 * URL hyperlink <3>:                     Link types for pdftex and dvipdfm.
                                                               (line  25)
 * url.sty:                               Packages known to work.
-                                                              (line 131)
+                                                              (line 128)
 * url.sty <1>:                           URL hyperlinks.      (line   6)
 * url.sty <2>:                           Hyperlinks (xhyper.tex).
-                                                              (line   7)
+                                                              (line   8)
 * user-inaccessible macros:              Category codes.      (line  19)
 * vectors:                               Slanted lines and vectors.
                                                               (line  15)
 * verbatim listing:                      Verbatim listing.    (line   6)
 * verbatim listing, demo:                Highlighting TeX comments in listings (lscommnt.tex).
-                                                              (line   7)
+                                                              (line   8)
 * verbatim text, in index:               Index entries with special characters.
                                                               (line  40)
 * verbatim text, in table of contents:   Writing the .toc file.
                                                               (line  49)
-* version number:                        Introduction.        (line  51)
-* Walden, David:                         Introduction.        (line  62)
+* version number:                        Introduction.        (line  49)
+* Walden, David:                         Introduction.        (line  56)
 * Warner, Frank W.:                      Construction of commutative diagrams.
                                                               (line  25)
 * whatsits made by hyperlinks:           Hyperlink driver nolinks.
@@ -8185,7 +8036,7 @@
 * xeplain.tex:                           Introduction.        (line   6)
 * XeTeX:                                 Logos.               (line  11)
 * xhyper.tex:                            Hyperlinks (xhyper.tex).
-                                                              (line   7)
+                                                              (line   8)
 * Zassenhaus, Hans:                      Construction of commutative diagrams.
                                                               (line 121)
 * zooming, hyperlink destination:        Destination options for pdftex and dvipdfm.
@@ -8194,131 +8045,132 @@
 
 
 Tag Table:
-Node: Top798
-Node: Introduction8129
-Node: Installation11170
-Node: Invoking Eplain13222
-Node: User definitions17820
-Node: Diagnostics19647
-Node: Rules21212
-Node: Citations22043
-Node: Formatting citations28471
-Node: Formatting bibliographies30010
-Node: Commands from LaTeX33246
-Node: Displays34220
-Node: Formatting displays35607
-Node: Time of day36240
-Node: Lists36999
-Node: Formatting lists39139
-Node: Verbatim listing41422
-Node: Contents44642
-Node: Writing the .toc file45311
-Node: Reading the .toc file48173
-Node: Changing the .toc file's root name49576
-Node: Alternative contents files50592
-Node: Cross-references51156
-Node: Defining generic references52636
-Node: Using generic references53512
-Node: Page references54796
-Node: Equation references55615
-Node: Formatting equation references58367
-Node: Subequation references62717
-Node: Indexing64633
-Node: Indexing terms67655
-Node: Indexing commands68767
-Node: Modifying index entries71728
-Node: Index entries with special characters74696
-Node: Proofing index terms78938
-Node: Typesetting an index80751
-Node: Customizing indexing83217
-Node: Justification86913
-Node: Tables90008
-Node: Margins92499
-Node: Multiple columns94652
-Node: Footnotes96689
-Node: Fractions99264
-Node: Paths100047
-Node: Logos101603
-Node: Boxes102386
-Node: Checking for PDF output104172
-Node: Loading LaTeX packages105198
-Node: The \usepackage command106400
-Node: Environment for loading packages107486
-Node: Packages known to work109826
-Node: Packages known not to work116576
-Node: Hyperlinks117349
-Node: Introduction to hyperlinks117998
-Node: Explicit hyperlinks123535
-Node: Implicit hyperlinks125820
-Node: General hyperlinks127641
-Node: URL hyperlinks129164
-Node: Citation hyperlinks131264
-Node: List hyperlinks131991
-Node: Cross-reference hyperlinks132382
-Node: Page reference hyperlinks133753
-Node: Equation reference hyperlinks134414
-Node: Index hyperlinks135804
-Node: Exact destinations for index terms137562
-Node: Page destinations for index terms139729
-Node: Choosing destination placement142347
-Node: Index page list and page range parsers143136
-Node: Hyperlinks in see and see also entries143688
-Node: Footnote hyperlinks144486
-Node: Contents hyperlinks145680
-Node: Hyperlink drivers146063
-Node: Options supported by all drivers146697
-Node: Hyperlink driver hypertex149493
-Node: Destination types for hypertex152429
-Node: Destination options for hypertex153463
-Node: Link types for hypertex153945
-Node: Link options for hypertex155953
-Node: Hyperlink drivers pdftex and dvipdfm156975
-Node: Destination types for pdftex and dvipdfm157620
-Node: Destination options for pdftex and dvipdfm161099
-Node: Link types for pdftex and dvipdfm163550
-Node: Link options for pdftex and dvipdfm167070
-Node: Hyperlink driver nolinks170708
-Node: Setting hyperlink types and options173111
-Node: Setting default types and options174112
-Node: Setting group types175538
-Node: Setting group options176727
-Node: Turning hyperlinks on/off179208
-Node: Turning low-level commands on/off179874
-Node: Turning hyperlinks on/off for a group180387
-Node: Making PDF outlines181540
-Node: Arrow theoretic diagrams184425
-Node: Slanted lines and vectors184792
-Node: Commutative diagrams186866
-Node: Arrows and morphisms187463
-Node: Construction of commutative diagrams191918
-Node: Commutative diagram parameters199083
-Node: Programming definitions200899
-Node: Category codes201900
-Node: Allocation macros204545
-Node: Iteration206680
-Node: Macro arguments208332
-Node: Converting to characters211707
-Node: Expansion213092
-Node: \csn and \ece213655
-Node: \edefappend214220
-Node: Hooks214767
-Node: Properties216941
-Node: \expandonce218020
-Node: \ifundefined218468
-Node: \ifempty219032
-Node: \ifinteger and \isinteger219774
-Node: \futurenonspacelet220814
-Node: Obeying spaces221415
-Node: Writing out numbers222439
-Node: Mode-specific penalties222762
-Node: Auxiliary files223491
-Node: User-defined environments224410
-Node: Page list and page range parsers225623
-Node: Demo files227755
-Node: Hyperlinks (xhyper.tex)228322
-Node: Highlighting TeX comments in listings (lscommnt.tex)236671
-Node: Macro index239127
-Node: Concept index307988
+Node: Top801
+Node: Introduction2219
+Node: Installation5572
+Node: Invoking Eplain6888
+Node: User definitions11442
+Node: Diagnostics13269
+Node: Rules14834
+Node: Citations15665
+Node: Formatting citations22093
+Node: Formatting bibliographies23632
+Node: Commands from LaTeX26868
+Node: Displays27842
+Node: Formatting displays29229
+Node: Time of day29862
+Node: Lists30621
+Node: Formatting lists32761
+Node: Verbatim listing35044
+Node: Contents38264
+Node: Writing the .toc file38933
+Node: Reading the .toc file41795
+Node: Changing the .toc file's root name43198
+Node: Alternative contents files44214
+Node: Cross-references44778
+Node: Defining generic references46258
+Node: Using generic references47134
+Node: Page references48418
+Node: Equation references49237
+Node: Formatting equation references51989
+Node: Subequation references56339
+Node: Indexing58248
+Node: Indexing terms61270
+Node: Indexing commands62382
+Node: Modifying index entries65343
+Node: Index entries with special characters68311
+Node: Proofing index terms72553
+Node: Typesetting an index74366
+Node: Customizing indexing76832
+Node: Justification80521
+Node: Tables83616
+Node: Margins86107
+Node: Multiple columns88260
+Node: Footnotes90297
+Node: Fractions92872
+Node: Paths93655
+Node: Logos95211
+Node: Boxes95995
+Node: Checking for PDF output97781
+Node: Loading LaTeX packages98807
+Node: The \usepackage command100090
+Node: Environment for loading packages101176
+Node: Packages known to work103516
+Node: Packages known not to work110204
+Node: Hyperlinks110977
+Node: Introduction to hyperlinks111626
+Node: Explicit hyperlinks117164
+Node: Implicit hyperlinks119449
+Node: General hyperlinks121270
+Node: URL hyperlinks122793
+Node: Citation hyperlinks124895
+Node: List hyperlinks125622
+Node: Cross-reference hyperlinks126013
+Node: Page reference hyperlinks127384
+Node: Equation reference hyperlinks128045
+Node: Index hyperlinks129435
+Node: Exact destinations for index terms131193
+Node: Page destinations for index terms133353
+Node: Choosing destination placement135971
+Node: Index page list and page range parsers136760
+Node: Hyperlinks in see and see also entries137312
+Node: Footnote hyperlinks138110
+Node: Contents hyperlinks139304
+Node: Hyperlink drivers139687
+Node: Options supported by all drivers140321
+Node: Hyperlink driver hypertex143117
+Node: Destination types for hypertex146038
+Node: Destination options for hypertex147072
+Node: Link types for hypertex147554
+Node: Link options for hypertex149562
+Node: Hyperlink drivers pdftex and dvipdfm150584
+Node: Destination types for pdftex and dvipdfm151229
+Node: Destination options for pdftex and dvipdfm154708
+Node: Link types for pdftex and dvipdfm157159
+Node: Link options for pdftex and dvipdfm160679
+Node: Hyperlink driver nolinks164317
+Node: Setting hyperlink types and options166720
+Node: Setting default types and options167721
+Node: Setting group types169147
+Node: Setting group options170336
+Node: Turning hyperlinks on/off172817
+Node: Turning low-level commands on/off173483
+Node: Turning hyperlinks on/off for a group173996
+Node: Making PDF outlines175149
+Node: Arrow theoretic diagrams178034
+Node: Slanted lines and vectors178401
+Node: Commutative diagrams180475
+Node: Arrows and morphisms181072
+Node: Construction of commutative diagrams185527
+Node: Commutative diagram parameters192692
+Node: Programming definitions194508
+Node: Category codes195509
+Node: Allocation macros198154
+Node: Scratch registers200321
+Node: Iteration201357
+Node: Macro arguments203009
+Node: Converting to characters206384
+Node: Expansion207769
+Node: \csn and \ece208332
+Node: \edefappend208897
+Node: Hooks209444
+Node: Properties211618
+Node: \expandonce212697
+Node: \ifundefined213145
+Node: \ifempty213709
+Node: \ifinteger and \isinteger214451
+Node: \futurenonspacelet215469
+Node: Obeying spaces216070
+Node: Writing out numbers217094
+Node: Mode-specific penalties217417
+Node: Auxiliary files218146
+Node: User-defined environments219065
+Node: Page list and page range parsers220278
+Node: Demo files222410
+Node: Hyperlinks (xhyper.tex)222977
+Node: Highlighting TeX comments in listings (lscommnt.tex)231327
+Node: Macro index233784
+Node: Concept index302645
 
 End Tag Table
 

Modified: trunk/doc/eplain.pdf
===================================================================
(Binary files differ)

Modified: trunk/doc/eplain.texi
===================================================================
--- trunk/doc/eplain.texi	2022-10-02 17:52:12 UTC (rev 54)
+++ trunk/doc/eplain.texi	2022-10-03 00:49:11 UTC (rev 55)
@@ -1,9 +1,10 @@
 \input texinfo
+ at c $Id$
 @setfilename eplain.info
 @settitle Eplain:  Expanded Plain @TeX{}
 
- at set UPDATED July 2020
- at set VERSION 3.11
+ at set UPDATED October 2022
+ at set VERSION 3.12
 
 @copying
 This manual documents the Eplain macros, version @value{VERSION},
@@ -71,194 +72,8 @@
 * Demo files::                  Sample documents demonstrating Eplain.
 * Macro index::                 Entries for TeX and Eplain control sequences.
 * Concept index::               General index.
-
- at detailmenu
- --- The Detailed Node Listing ---
-
-User definitions
-
-* Diagnostics::                 Tracing information.
-* Rules::                       Changing the default rule dimensions.
-* Citations::                   Using BibTeX and Eplain to make bibliographies.
-* Displays::                    Changing the formatting of math displays.
-* Time of day::                 Producing the time of day.
-* Lists::                       Producing numbered and unordered lists.
-* Verbatim listing::            Producing text just as it appears.
-* Contents::                    Making a table of contents.
-* Cross-references::            Symbolically referring to pages or equations.
-* Page references::             Symbolic references to page numbers.
-* Equation references::         Symbolic references to equation numbers.
-* Indexing::                    Creating and typesetting indexes.
-* Justification::               Left- or right-justification, or centering.
-* Tables::                      Producing ordered tables.
-* Margins::                     Changing the margins directly.
-* Multiple columns::            Getting output in two columns.
-* Footnotes::                   Autonumbered footnotes; changing formatting.
-* Fractions::                   A better way to produce fractions in text.
-* Paths::                       Allowing line breaks in pathnames.
-* Logos::                       Various logos.
-* Boxes::                       Producing filled or open rectangles.
-* Checking for PDF output::     Checking for pdfTeX in PDF mode.
-* Loading LaTeX packages::      Support for LaTeX packages under plain TeX.
-
-Citations
-
-* Formatting citations::        Changing the way citations are printed.
-* Formatting bibliographies::   Changing the way bibliographies are printed.
-
-Displays
-
-* Formatting displays::         General formatting of displays.
-
-Lists
-
-* Formatting lists::            Changing how the lists look.
-
-Contents
-
-* Writing the .toc file::
-* Reading the .toc file::
-* Changing the .toc file's root name::
-* Alternative contents files::
-
-Cross-references
-
-* Defining generic references::  
-* Using generic references::    
-
-Equation references
-
-* Formatting equation references::  
-* Subequation references::      
-
-Indexing
-
-* Indexing terms::              Specifying what to index.
-* Typesetting an index::        Printing the sorted output.
-* Customizing indexing::        Creating commands and specifying extra actions.
-
-Indexing terms
-
-* Indexing commands::           Making index entries.
-* Modifying index entries::     Ranges, see/see also, page number typesetting.
-* Index entries with special characters::
-* Proofing index terms::        Noting index entries in the margins.
-
-Loading LaTeX packages
-
-* The \usepackage command::           Command to load packages.
-* Environment for loading packages::  Environment for the \usepackage commands.
-* Packages known to work::            Supported packages.
-* Packages known not to work::        Packages known not to work with Eplain.
-
-Hyperlinks
-
-* Introduction to hyperlinks::
-* Explicit hyperlinks::
-* Implicit hyperlinks::
-* Hyperlink drivers::
-* Setting hyperlink types and options::
-* Turning hyperlinks on/off::
-
-Implicit hyperlinks
-
-* General hyperlinks::              hrefint, hrefext
-* URL hyperlinks::                  url
-* Citation hyperlinks::             cite, bib
-* List hyperlinks::                 li
-* Cross-reference hyperlinks::      definexref, ref
-* Page reference hyperlinks::       xrdef, xref
-* Equation reference hyperlinks::   eq
-* Index hyperlinks::                idx
-* Footnote hyperlinks::             foot, footback
-* Contents hyperlinks::
-
-Index hyperlinks
-
-* Exact destinations for index terms::
-* Page destinations for index terms::
-* Choosing destination placement::
-* Index page list and page range parsers::
-* Hyperlinks in see and see also entries::
-
-Hyperlink drivers
-
-* Options supported by all drivers::
-* Hyperlink driver hypertex::
-* Hyperlink drivers pdftex and dvipdfm::
-* Hyperlink driver nolinks::
-
-Hyperlink driver hypertex::
-
-* Destination types for hypertex::
-* Destination options for hypertex::
-* Link types for hypertex::
-* Link options for hypertex::
-
-Hyperlink drivers pdftex and dvipdfm::
-
-* Destination types for pdftex and dvipdfm::
-* Destination options for pdftex and dvipdfm::
-* Link types for pdftex and dvipdfm::
-* Link options for pdftex and dvipdfm::
-
-Setting hyperlink types and options
-
-* Setting default types and options::
-* Setting group types::
-* Setting group options::
-
-Turning hyperlinks on/off
-
-* Turning low-level commands on/off::
-* Turning hyperlinks on/off for a group::
-
-Arrow theoretic diagrams
-
-* Slanted lines and vectors::   
-* Commutative diagrams::        
-
-Commutative diagrams
-
-* Arrows and morphisms::        
-* Construction of commutative diagrams::  
-* Commutative diagram parameters::  
-
-Programming definitions
-
-* Category codes::              Changing category codes.
-* Allocation macros::           Non-outer versions of \newcount et al.
-* Iteration::                   Doing `for' and `while' loops in TeX.
-* Macro arguments::             Reading and ignoring them.
-* Converting to characters::    Normalizing control sequences and spaces.
-* Expansion::                   Controlling expansion.
-* Obeying spaces::              Making whitespace count anywhere.
-* Writing out numbers::         Making `1' into `one'.
-* Mode-specific penalties::
-* Auxiliary files::             Testing for their existence.
-* User-defined environments::   User-defined environments.
-* Page list and page range parsers::
-
-Expansion
-
-* \csn and \ece::               
-* \edefappend::                 
-* Hooks::                       Manipulating and executing named actions.
-* Properties::                  Associating information with a csname.
-* \expandonce::                 
-* \ifundefined::                
-* \ifempty::
-* \ifinteger and \isinteger::
-* \futurenonspacelet::          
-
-Demo files
-
-* Hyperlinks (xhyper.tex)::
-* Highlighting TeX comments in listings (lscommnt.tex)::
- at end detailmenu
 @end menu
 
-
 @include intro.texi
 @include install.texi
 @include invoke.texi
@@ -270,5 +85,4 @@
 @include csindex.texi
 @include index.texi
 
-
 @bye


Property changes on: trunk/doc/eplain.texi
___________________________________________________________________
Added: svn:keywords
## -0,0 +1 ##
+Date Author Id Revision
\ No newline at end of property
Modified: trunk/doc/hlink.texi
===================================================================
--- trunk/doc/hlink.texi	2022-10-02 17:52:12 UTC (rev 54)
+++ trunk/doc/hlink.texi	2022-10-03 00:49:11 UTC (rev 55)
@@ -61,7 +61,7 @@
 The knowledge about the commands that the various processors
 understand is programmed into Eplain's hyperlink drivers.  Eplain
 provides three drivers:  @code{hypertex} (implementation of the
-Hyper at TeX{} standard, see @url{http://arxiv.org/@/hypertex}), and
+Hyper at TeX{} standard, see @url{https://arxiv.org/hypertex}), and
 @code{pdftex} and @code{dvipdfm} (named after the programs which
 process the hyperlink commands,
 @pindex pdftex
@@ -398,7 +398,7 @@
 
 \enablehyperlinks
 
-\url@{http://foo/bar@}
+\url@{https://foo/bar@}
 
 \url@{mailto:foobar@@example.org@}
 
@@ -419,7 +419,7 @@
 \enablehyperlinks
 \hlopts@{bwidth=0@}
 
-\url@{http://foo/bar@}
+\url@{https://foo/bar@}
 
 \url@{mailto:foobar@@example.org@}
 
@@ -695,7 +695,7 @@
 example:
 
 @example
-prompt$ ./idxuniq file.idx | makeindex > file.ind
+$ ./idxuniq file.idx | makeindex >file.ind
 @end example
 
 @noindent Still, this solution is not ideal, as the page-range formation
@@ -1007,7 +1007,7 @@
 @cindex driver @code{hypertex}
 @cindex hyperlink driver @code{hypertex}
 Hyper at TeX{} is a standard for inclusion of hyperlink information in
- at TeX{} (and @LaTeX{}) documents (see @url{http://arxiv.org/@/hypertex}).
+ at TeX{} (and @LaTeX{}) documents (see @url{https://arxiv.org/@/hypertex}).
 This standard defines a set of hyperlink tags implemented as
 @code{\special} commands written into the @acronym{DVI} file.  The
 major advantage of such standard is that a single @file{.dvi} file
@@ -1057,9 +1057,9 @@
 Hyper at TeX{} commands, then
 
 @example
-prompt$ tex foo.tex
-prompt$ dvips -z foo.dvi -o
-prompt$ ps2pdf foo.ps
+$ tex foo.tex
+$ dvips -z foo.dvi -o
+$ ps2pdf foo.ps
 @end example
 
 @noindent will produce @file{foo.pdf} with hyperlinks.

Modified: trunk/doc/index.texi
===================================================================
--- trunk/doc/index.texi	2022-10-02 17:52:12 UTC (rev 54)
+++ trunk/doc/index.texi	2022-10-03 00:49:11 UTC (rev 55)
@@ -1,3 +1,4 @@
+ at c $Id$
 @c Public domain.
 
 @node Concept index


Property changes on: trunk/doc/index.texi
___________________________________________________________________
Added: svn:keywords
## -0,0 +1 ##
+Date Author Id Revision
\ No newline at end of property
Modified: trunk/doc/install.texi
===================================================================
--- trunk/doc/install.texi	2022-10-02 17:52:12 UTC (rev 54)
+++ trunk/doc/install.texi	2022-10-03 00:49:11 UTC (rev 55)
@@ -1,3 +1,4 @@
+ at c $Id$
 @c This is part of the Eplain manual.  Public domain.
 
 @node Installation
@@ -8,38 +9,28 @@
 @cindex Eplain, upgrading
 @cindex upgrading
 Your @TeX{} installation should already contain a version of Eplain
-(@file{eplain.tex}) in its main @file{texmf} tree (usually under
- at file{/usr/share/texmf/tex/eplain/} on Unix systems).  To install a
-newer version of Eplain, put the new @file{eplain.tex} (included in
-Eplain distributions) in the @file{tex/eplain/} subdirectory of your
-local @file{texmf} tree.  The newer version you install in the local
-tree should override the older one in the main tree.
+(@file{eplain.tex}) in its main @file{texmf} tree; with @TeX{} Live,
+it's in @file{.../texmf-dist/tex/eplain/eplain.tex}.
 
-The location of the local @file{texmf} tree obviously depends on your
-operating system and @TeX{} installation.  On Unix systems the usual
-location is @file{/usr/local/share/texmf/}.  If you don't have write
-permissions for @file{/usr/local/share/texmf/}, many installations read
-the @file{texmf} tree in the user's home directory; @file{eplain.tex}
-then should go under @file{~/texmf/tex/eplain/}.  For more information
-about @TeX{} directory structure, please see
- at url{http://www.tex.ac.uk/@/cgi-bin/@/texfaq2html?label=tds}.
+Generally, you can just use that version and there is no need to do
+anything else.  But if you want to use a newer version of Eplain for a
+given document, you can put the new @file{eplain.tex} in the
+document's directory, and it will be found.
 
 @vindex TEXINPUTS
-If you prefer to install @file{eplain.tex} in a non-standard place, set
-an environment variable (@code{TEXINPUTS} for the Web2C port of @TeX{}
-to Unix) to tell @TeX{} how to find it.
+If you want to install a new @file{eplain.tex} in some other place,
+set an environment variable (commonly, @code{TEXINPUTS}) to tell
+ at TeX{} how to find it.
 
-If you want, you can also create a format (@file{.fmt})
 @pindex .fmt @r{file}
 @cindex format file
 @pindex eplain.fmt
-file for Eplain, which will eliminate the time spent reading the macro
-source file with @code{\input}.  You do this by issuing a sequence of
-Unix commands something like this:
+Distributions should also create and maintain the @file{eplain.fmt}
+file file. But if you want to do it yourself, you can:
 
 @example
-prompt$ touch eplain.aux
-prompt$ initex
+$ touch eplain.aux
+$ initex
 This is TeX, ...
 **&plain eplain
 (eplain.tex)
@@ -49,14 +40,12 @@
 
 @pindex eplain.aux
 @cindex undefined labels, warnings about
- at noindent You must make sure that @file{eplain.aux} exists @emph{before} you
-run @file{initex}; otherwise, warning messages about undefined labels
-will never be issued.
+ at noindent You must make sure that @file{eplain.aux} exists
+ at emph{before} you run @file{initex}; otherwise, warning messages about
+undefined labels will never be issued.
 
 @vindex TEXFORMATS
 You then have to install the resulting @file{eplain.fmt} in your local
- at file{texmf} tree or set an environment variable to tell @TeX{} how to
-find it.  For the Web2C port of @TeX{} to Unix, format files are usually
-installed under @file{/usr/local/share/texmf/web2c/} or
- at file{/var/lib/texmf/web2c/}; the environment variable is
- at code{TEXFORMATS}.
+ at file{texmf} tree or set an environment variable (@code{TEXFORMATS} to
+tell @TeX{} how to find it.  You'll need to consult your
+distribution's documentation about that.


Property changes on: trunk/doc/install.texi
___________________________________________________________________
Added: svn:keywords
## -0,0 +1 ##
+Date Author Id Revision
\ No newline at end of property
Modified: trunk/doc/intro.texi
===================================================================
--- trunk/doc/intro.texi	2022-10-02 17:52:12 UTC (rev 54)
+++ trunk/doc/intro.texi	2022-10-03 00:49:11 UTC (rev 55)
@@ -1,3 +1,4 @@
+ at c $Id$
 @c This is part of the Eplain manual.  Public domain.
 
 @node Introduction
@@ -20,7 +21,7 @@
 @cindex Lamport, Leslie
 and Texinfo
 @cindex Texinfo
-(Originally written by Richard Stallman). 
+(originally written by Richard Stallman). 
 @cindex Stallman, Richard
 @cindex rms
 Instead, it provides definitions that are intended to be useful
@@ -65,18 +66,11 @@
 at the end of the source file @file{eplain.tex}.  When corresponding,
 please refer to it. 
 
-To get on this mailing list yourself, email
- at email{tex-eplain-request@@tug.org} with a message whose body contains
-a line
+To subscribe to this mailing list (anyone can subscribe, and archives
+are public), visit @url{https://lists.tug.org/tex-eplain}.
 
- at example
-subscribe @var{you@@your.preferred.address}
- at end example
-
- at noindent or visit @url{http://lists.tug.org/tex-eplain}.
-
 @cindex Walden, David
-David Walden had reported his experience with Eplain as a new user.
+David Walden reported his experience with Eplain as a new user.
 The article is available online at
 @url{https://tug.org/@/pracjourn/@/2005-4/@/walden}.  An introductory
 article (written for
@@ -83,3 +77,21 @@
 @cindex @i{TUGboat}
 @i{TUGboat}) is also available online at
 @url{https://tug.org/@/eplain/@/misc/@/tb84katsi.pdf}.
+
+Finally, here are two alternatives to Eplain:
+
+ at enumerate
+ at item If you just want to load the @LaTeX{} color or graphics package,
+the @LaTeX{} team's @file{miniltx.tex} suffices:
+
+ at example
+\input miniltx.tex
+\input graphicx.tex
+ at end example
+
+ at cindex Op at TeX{}
+ at item If you're interested in a fully-fledged format that shares much of
+Eplain's (and plain.tex's) philosophy, check out Op at TeX{}:
+ at url{https://ctan.org/pkg/optex}.
+
+ at end enumerate


Property changes on: trunk/doc/intro.texi
___________________________________________________________________
Added: svn:keywords
## -0,0 +1 ##
+Date Author Id Revision
\ No newline at end of property
Modified: trunk/doc/invoke.texi
===================================================================
--- trunk/doc/invoke.texi	2022-10-02 17:52:12 UTC (rev 54)
+++ trunk/doc/invoke.texi	2022-10-03 00:49:11 UTC (rev 55)
@@ -1,3 +1,4 @@
+ at c $Id$
 @c This is part of the Eplain manual.  Public domain.
 
 @node Invoking Eplain
@@ -10,26 +11,25 @@
 \input eplain
 @end example
 
- at noindent at the beginning of your input file.  The macro file is small
-enough that reading it does not take an unbearably long time---at least on
-contemporary machines.  
+ at noindent at the beginning of your (plain @TeX{}) input file.  The
+macro file is small enough that reading it does not take long.
 
-In addition, if a format (@file{.fmt})
+However, if a format (@file{.fmt})
 @pindex .fmt @r{file}
 file has been created for Eplain (see the previous section), you can
-eliminate the time spent reading the macro source file.  You do this
+eliminate even the time spent reading the macro source file.  You do this
 by responding @code{&eplain} to @TeX{}'s @samp{**} prompt.  For
 example:
 
 @example
-initex
+$ tex
 This is TeX, ...
 **&eplain myfile
 @end example
 
-Depending on the implementation of @TeX{} which you are using, you might
-also be able to invoke @TeX{} as @file{eplain} and have the format file
-automatically read.
+In @TeX{} Live and other distributions, a command-line executable
+named @file{eplain} is provided which reads the @file{eplain.fmt} file
+automatically.
 
 If you write something which you will be distributing to others, you
 won't know if the Eplain format will be loaded already.  If it is, then
@@ -38,8 +38,8 @@
 @code{\eplain}
 @findex eplain
 to be the letter @code{t} (a convention borrowed from Lisp; it doesn't
-actually matter what the definition is, only that the definition
-exists).  Therefore, you can do the following:
+matter what the definition is, only that the definition exists).
+Therefore, you can do the following:
 
 @example
 \ifx\eplain\undefined \input eplain \fi
@@ -59,10 +59,10 @@
 @item btxmac.tex
 bibliography-related macros (@pxref{Citations});
 
- at item ifpdf.sty
-sets the switch @code{\ifpdf}, which can be used to detect pdf at TeX{}
-in PDF mode (@pxref{Checking for PDF output}), written by Heiko
-Oberdiek;
+ at item iftex.sty
+sets the switch @code{\ifpdf} (among other things), which can be used
+to detect direct PDF output (@pxref{Checking for PDF output}),
+originally written by Heiko Oberdiek;
 
 @item path.sty
 macro for allowing line breaks at punctuation characters within long
@@ -96,7 +96,7 @@
 \input eplain
 @end example
 
- at noindent By default, @code{\nobibtex} is undefined, and so the
+ at noindent By default, @code{\nobibtex} is not defined, and so the
 bibliography definitions @emph{are} made.
 
 @findex noarrow
@@ -131,7 +131,7 @@
 @file{.tex} file in order to produce and typeset indexes, resolve
 undefined cross-references and/or citations.  The shell script
 @command{texi2dvi} from the Texinfo documentation system (see
- at url{http://www.gnu.org/@/software/@/texinfo}) can automate this process:
+ at url{https://www.gnu.org/@/software/@/texinfo}) can automate this process:
 it runs Bib at TeX{}, MakeIndex and @TeX{} as many times as needed to
 complete the compilation process.  You will need to set the
 @env{LATEX} environment variable to @samp{tex}.  For example, in a
@@ -138,11 +138,11 @@
 Bourne-compatible shell, the following command will do all the work:
 
 @example
-prompt$ LATEX=tex texi2dvi file.tex
+$ LATEX=tex texi2dvi file.tex
 @end example
 
 @pindex pdftex
- at noindent (Despite the name, @command{texi2dvi} can also produce
- at file{.pdf} files; just set @samp{LATEX=pdftex}.)  See the output from
-the command @command{texi2dvi --help} for invoking information and a
-full list of options.
+ at noindent Despite the name, @command{texi2dvi} can also produce
+ at file{.pdf} output (among other formats); set @code{LATEX=pdftex} for
+this.  See the output from @command{texi2dvi --help} for a full list
+of options.


Property changes on: trunk/doc/invoke.texi
___________________________________________________________________
Added: svn:keywords
## -0,0 +1 ##
+Date Author Id Revision
\ No newline at end of property
Modified: trunk/doc/progdef.texi
===================================================================
--- trunk/doc/progdef.texi	2022-10-02 17:52:12 UTC (rev 54)
+++ trunk/doc/progdef.texi	2022-10-03 00:49:11 UTC (rev 55)
@@ -1,3 +1,4 @@
+ at c $Id$
 @c This is part of the Eplain manual.  Public domain.
 
 @node Programming definitions
@@ -196,7 +197,45 @@
 \innerinnerdef@{proclaim@}
 @end example
 
+ at menu
+* Scratch registers::
+ at end menu
 
+ at node Scratch registers
+ at subsection Scratch registers
+
+ at cindex scratch registers
+ at cindex registers, scratch
+
+It seems worth reiterating here the conventions for scratch registers
+defined by Knuth for plain @TeX{}, which Eplain inherits and does not
+change.
+
+ at itemize
+ at item
+Registers numbered 0 to 9, and 255, are free for any use.  Thus their
+values must be assumed to be clobbered whenever another macro might
+get control.  Eplain macros do use the scratch registers.
+
+ at item
+First exception: the @code{\count} registers @code{0..9} are
+used internally by @TeX{} for page numbering and thus are not
+available for any other use.
+
+ at item
+Second exception: the @code{\box255} register is likewise internally
+by @TeX{}, to ship out pages.  So it's not available either.
+
+ at item 
+By convention, all assignments to the scratch registers 1, 3, 5, 7,
+and 9 should be @code{\global}, and assignments to the others should
+be non- at code{\global}.
+
+ at end itemize
+
+For more details on all aspects of register usage, see @cite{The
+ at TeX{}book} or any other plain @TeX{} reference.
+
 @node Iteration
 @section Iteration
 
@@ -716,7 +755,7 @@
 
 @cindex @TeX{} Frequently Asked Questions
 These macros come from the @TeX{} Frequently Asked Questions
-(@url{http://www.tex.ac.uk/@/cgi-bin/@/texfaq2html}).
+(@url{https://texfaq.org}).
 
 
 @node \futurenonspacelet


Property changes on: trunk/doc/progdef.texi
___________________________________________________________________
Added: svn:keywords
## -0,0 +1 ##
+Date Author Id Revision
\ No newline at end of property
Deleted: trunk/doc/texinfo.tex
===================================================================
--- trunk/doc/texinfo.tex	2022-10-02 17:52:12 UTC (rev 54)
+++ trunk/doc/texinfo.tex	2022-10-03 00:49:11 UTC (rev 55)
@@ -1,11610 +0,0 @@
-% texinfo.tex -- TeX macros to handle Texinfo files.
-% 
-% Load plain if necessary, i.e., if running under initex.
-\expandafter\ifx\csname fmtname\endcsname\relax\input plain\fi
-%
-\def\texinfoversion{2019-05-18.15}
-%
-% Copyright 1985, 1986, 1988, 1990-2019 Free Software Foundation, Inc.
-%
-% This texinfo.tex file is free software: you can redistribute it and/or
-% modify it under the terms of the GNU General Public License as
-% published by the Free Software Foundation, either version 3 of the
-% License, or (at your option) any later version.
-%
-% This texinfo.tex file is distributed in the hope that it will be
-% useful, but WITHOUT ANY WARRANTY; without even the implied warranty
-% of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-% General Public License for more details.
-%
-% You should have received a copy of the GNU General Public License
-% along with this program.  If not, see <https://www.gnu.org/licenses/>.
-%
-% As a special exception, when this file is read by TeX when processing
-% a Texinfo source document, you may use the result without
-% restriction. This Exception is an additional permission under section 7
-% of the GNU General Public License, version 3 ("GPLv3").
-%
-% Please try the latest version of texinfo.tex before submitting bug
-% reports; you can get the latest version from:
-%   https://ftp.gnu.org/gnu/texinfo/ (the Texinfo release area), or
-%   https://ftpmirror.gnu.org/texinfo/ (same, via a mirror), or
-%   https://www.gnu.org/software/texinfo/ (the Texinfo home page)
-% The texinfo.tex in any given distribution could well be out
-% of date, so if that's what you're using, please check.
-%
-% Send bug reports to bug-texinfo at gnu.org.  Please include including a
-% complete document in each bug report with which we can reproduce the
-% problem.  Patches are, of course, greatly appreciated.
-%
-% To process a Texinfo manual with TeX, it's most reliable to use the
-% texi2dvi shell script that comes with the distribution.  For a simple
-% manual foo.texi, however, you can get away with this:
-%   tex foo.texi
-%   texindex foo.??
-%   tex foo.texi
-%   tex foo.texi
-%   dvips foo.dvi -o  # or whatever; this makes foo.ps.
-% The extra TeX runs get the cross-reference information correct.
-% Sometimes one run after texindex suffices, and sometimes you need more
-% than two; texi2dvi does it as many times as necessary.
-%
-% It is possible to adapt texinfo.tex for other languages, to some
-% extent.  You can get the existing language-specific files from the
-% full Texinfo distribution.
-%
-% The GNU Texinfo home page is https://www.gnu.org/software/texinfo.
-
-
-\message{Loading texinfo [version \texinfoversion]:}
-
-% If in a .fmt file, print the version number
-% and turn on active characters that we couldn't do earlier because
-% they might have appeared in the input file name.
-\everyjob{\message{[Texinfo version \texinfoversion]}%
-  \catcode`+=\active \catcode`\_=\active}
-
-% LaTeX's \typeout.  This ensures that the messages it is used for
-% are identical in format to the corresponding ones from latex/pdflatex.
-\def\typeout{\immediate\write17}%
-
-\chardef\other=12
-
-% We never want plain's \outer definition of \+ in Texinfo.
-% For @tex, we can use \tabalign.
-\let\+ = \relax
-
-% Save some plain tex macros whose names we will redefine.
-\let\ptexb=\b
-\let\ptexbullet=\bullet
-\let\ptexc=\c
-\let\ptexcomma=\,
-\let\ptexdot=\.
-\let\ptexdots=\dots
-\let\ptexend=\end
-\let\ptexequiv=\equiv
-\let\ptexexclam=\!
-\let\ptexfootnote=\footnote
-\let\ptexgtr=>
-\let\ptexhat=^
-\let\ptexi=\i
-\let\ptexindent=\indent
-\let\ptexinsert=\insert
-\let\ptexlbrace=\{
-\let\ptexless=<
-\let\ptexnewwrite\newwrite
-\let\ptexnoindent=\noindent
-\let\ptexplus=+
-\let\ptexraggedright=\raggedright
-\let\ptexrbrace=\}
-\let\ptexslash=\/
-\let\ptexsp=\sp
-\let\ptexstar=\*
-\let\ptexsup=\sup
-\let\ptext=\t
-\let\ptextop=\top
-{\catcode`\'=\active \global\let\ptexquoteright'}% active in plain's math mode
-
-% If this character appears in an error message or help string, it
-% starts a new line in the output.
-\newlinechar = `^^J
-
-% Use TeX 3.0's \inputlineno to get the line number, for better error
-% messages, but if we're using an old version of TeX, don't do anything.
-%
-\ifx\inputlineno\thisisundefined
-  \let\linenumber = \empty % Pre-3.0.
-\else
-  \def\linenumber{l.\the\inputlineno:\space}
-\fi
-
-% Set up fixed words for English if not already set.
-\ifx\putwordAppendix\undefined  \gdef\putwordAppendix{Appendix}\fi
-\ifx\putwordChapter\undefined   \gdef\putwordChapter{Chapter}\fi
-\ifx\putworderror\undefined     \gdef\putworderror{error}\fi
-\ifx\putwordfile\undefined      \gdef\putwordfile{file}\fi
-\ifx\putwordin\undefined        \gdef\putwordin{in}\fi
-\ifx\putwordIndexIsEmpty\undefined       \gdef\putwordIndexIsEmpty{(Index is empty)}\fi
-\ifx\putwordIndexNonexistent\undefined   \gdef\putwordIndexNonexistent{(Index is nonexistent)}\fi
-\ifx\putwordInfo\undefined      \gdef\putwordInfo{Info}\fi
-\ifx\putwordInstanceVariableof\undefined \gdef\putwordInstanceVariableof{Instance Variable of}\fi
-\ifx\putwordMethodon\undefined  \gdef\putwordMethodon{Method on}\fi
-\ifx\putwordNoTitle\undefined   \gdef\putwordNoTitle{No Title}\fi
-\ifx\putwordof\undefined        \gdef\putwordof{of}\fi
-\ifx\putwordon\undefined        \gdef\putwordon{on}\fi
-\ifx\putwordpage\undefined      \gdef\putwordpage{page}\fi
-\ifx\putwordsection\undefined   \gdef\putwordsection{section}\fi
-\ifx\putwordSection\undefined   \gdef\putwordSection{Section}\fi
-\ifx\putwordsee\undefined       \gdef\putwordsee{see}\fi
-\ifx\putwordSee\undefined       \gdef\putwordSee{See}\fi
-\ifx\putwordShortTOC\undefined  \gdef\putwordShortTOC{Short Contents}\fi
-\ifx\putwordTOC\undefined       \gdef\putwordTOC{Table of Contents}\fi
-%
-\ifx\putwordMJan\undefined \gdef\putwordMJan{January}\fi
-\ifx\putwordMFeb\undefined \gdef\putwordMFeb{February}\fi
-\ifx\putwordMMar\undefined \gdef\putwordMMar{March}\fi
-\ifx\putwordMApr\undefined \gdef\putwordMApr{April}\fi
-\ifx\putwordMMay\undefined \gdef\putwordMMay{May}\fi
-\ifx\putwordMJun\undefined \gdef\putwordMJun{June}\fi
-\ifx\putwordMJul\undefined \gdef\putwordMJul{July}\fi
-\ifx\putwordMAug\undefined \gdef\putwordMAug{August}\fi
-\ifx\putwordMSep\undefined \gdef\putwordMSep{September}\fi
-\ifx\putwordMOct\undefined \gdef\putwordMOct{October}\fi
-\ifx\putwordMNov\undefined \gdef\putwordMNov{November}\fi
-\ifx\putwordMDec\undefined \gdef\putwordMDec{December}\fi
-%
-\ifx\putwordDefmac\undefined    \gdef\putwordDefmac{Macro}\fi
-\ifx\putwordDefspec\undefined   \gdef\putwordDefspec{Special Form}\fi
-\ifx\putwordDefvar\undefined    \gdef\putwordDefvar{Variable}\fi
-\ifx\putwordDefopt\undefined    \gdef\putwordDefopt{User Option}\fi
-\ifx\putwordDeffunc\undefined   \gdef\putwordDeffunc{Function}\fi
-
-% Give the space character the catcode for a space.
-\def\spaceisspace{\catcode`\ =10\relax}
-
-% Likewise for ^^M, the end of line character.
-\def\endlineisspace{\catcode13=10\relax}
-
-\chardef\dashChar  = `\-
-\chardef\slashChar = `\/
-\chardef\underChar = `\_
-
-% Ignore a token.
-%
-\def\gobble#1{}
-
-% The following is used inside several \edef's.
-\def\makecsname#1{\expandafter\noexpand\csname#1\endcsname}
-
-% Hyphenation fixes.
-\hyphenation{
-  Flor-i-da Ghost-script Ghost-view Mac-OS Post-Script
-  ap-pen-dix bit-map bit-maps
-  data-base data-bases eshell fall-ing half-way long-est man-u-script
-  man-u-scripts mini-buf-fer mini-buf-fers over-view par-a-digm
-  par-a-digms rath-er rec-tan-gu-lar ro-bot-ics se-vere-ly set-up spa-ces
-  spell-ing spell-ings
-  stand-alone strong-est time-stamp time-stamps which-ever white-space
-  wide-spread wrap-around
-}
-
-% Sometimes it is convenient to have everything in the transcript file
-% and nothing on the terminal.  We don't just call \tracingall here,
-% since that produces some useless output on the terminal.  We also make
-% some effort to order the tracing commands to reduce output in the log
-% file; cf. trace.sty in LaTeX.
-%
-\def\gloggingall{\begingroup \globaldefs = 1 \loggingall \endgroup}%
-\def\loggingall{%
-  \tracingstats2
-  \tracingpages1
-  \tracinglostchars2  % 2 gives us more in etex
-  \tracingparagraphs1
-  \tracingoutput1
-  \tracingmacros2
-  \tracingrestores1
-  \showboxbreadth\maxdimen \showboxdepth\maxdimen
-  \ifx\eTeXversion\thisisundefined\else % etex gives us more logging
-    \tracingscantokens1
-    \tracingifs1
-    \tracinggroups1
-    \tracingnesting2
-    \tracingassigns1
-  \fi
-  \tracingcommands3  % 3 gives us more in etex
-  \errorcontextlines16
-}%
-
-% @errormsg{MSG}.  Do the index-like expansions on MSG, but if things
-% aren't perfect, it's not the end of the world, being an error message,
-% after all.
-% 
-\def\errormsg{\begingroup \indexnofonts \doerrormsg}
-\def\doerrormsg#1{\errmessage{#1}}
-
-% add check for \lastpenalty to plain's definitions.  If the last thing
-% we did was a \nobreak, we don't want to insert more space.
-%
-\def\smallbreak{\ifnum\lastpenalty<10000\par\ifdim\lastskip<\smallskipamount
-  \removelastskip\penalty-50\smallskip\fi\fi}
-\def\medbreak{\ifnum\lastpenalty<10000\par\ifdim\lastskip<\medskipamount
-  \removelastskip\penalty-100\medskip\fi\fi}
-\def\bigbreak{\ifnum\lastpenalty<10000\par\ifdim\lastskip<\bigskipamount
-  \removelastskip\penalty-200\bigskip\fi\fi}
-
-%
 Output routine
-%
-
-% For a final copy, take out the rectangles
-% that mark overfull boxes (in case you have decided
-% that the text looks ok even though it passes the margin).
-%
-\def\finalout{\overfullrule=0pt }
-
-\newdimen\outerhsize \newdimen\outervsize % set by the paper size routines
-\newdimen\topandbottommargin \topandbottommargin=.75in
-
-% Output a mark which sets \thischapter, \thissection and \thiscolor.
-% We dump everything together because we only have one kind of mark.
-% This works because we only use \botmark / \topmark, not \firstmark.
-%
-% A mark contains a subexpression of the \ifcase ... \fi construct.
-% \get*marks macros below extract the needed part using \ifcase.
-%
-% Another complication is to let the user choose whether \thischapter
-% (\thissection) refers to the chapter (section) in effect at the top
-% of a page, or that at the bottom of a page.
-
-% \domark is called twice inside \chapmacro, to add one
-% mark before the section break, and one after.
-%   In the second call \prevchapterdefs is the same as \currentchapterdefs,
-% and \prevsectiondefs is the same as \currentsectiondefs.
-%   Then if the page is not broken at the mark, some of the previous
-% section appears on the page, and we can get the name of this section
-% from \firstmark for @everyheadingmarks top.
-%   @everyheadingmarks bottom uses \botmark.
-%
-% See page 260 of The TeXbook.
-\def\domark{%
-  \toks0=\expandafter{\currentchapterdefs}%
-  \toks2=\expandafter{\currentsectiondefs}%
-  \toks4=\expandafter{\prevchapterdefs}%
-  \toks6=\expandafter{\prevsectiondefs}%
-  \toks8=\expandafter{\currentcolordefs}%
-  \mark{%
-                   \the\toks0 \the\toks2  % 0: marks for @everyheadingmarks top
-      \noexpand\or \the\toks4 \the\toks6  % 1: for @everyheadingmarks bottom
-    \noexpand\else \the\toks8             % 2: color marks
-  }%
-}
-
-% \gettopheadingmarks, \getbottomheadingmarks,
-% \getcolormarks - extract needed part of mark.
-%
-% \topmark doesn't work for the very first chapter (after the title
-% page or the contents), so we use \firstmark there -- this gets us
-% the mark with the chapter defs, unless the user sneaks in, e.g.,
-% @setcolor (or @url, or @link, etc.) between @contents and the very
-% first @chapter.
-\def\gettopheadingmarks{%
-  \ifcase0\the\savedtopmark\fi
-  \ifx\thischapter\empty \ifcase0\firstmark\fi \fi
-}
-\def\getbottomheadingmarks{\ifcase1\botmark\fi}
-\def\getcolormarks{\ifcase2\the\savedtopmark\fi}
-
-% Avoid "undefined control sequence" errors.
-\def\currentchapterdefs{}
-\def\currentsectiondefs{}
-\def\currentsection{}
-\def\prevchapterdefs{}
-\def\prevsectiondefs{}
-\def\currentcolordefs{}
-
-% Margin to add to right of even pages, to left of odd pages.
-\newdimen\bindingoffset
-\newdimen\normaloffset
-\newdimen\txipagewidth \newdimen\txipageheight
-
-% Main output routine.
-%
-\chardef\PAGE = 255
-\newtoks\defaultoutput
-\defaultoutput = {\savetopmark\onepageout{\pagecontents\PAGE}}
-\output=\expandafter{\the\defaultoutput}
-
-\newbox\headlinebox
-\newbox\footlinebox
-
-% When outputting the double column layout for indices, an output routine
-% is run several times, which hides the original value of \topmark.  This
-% can lead to a page heading being output and duplicating the chapter heading
-% of the index.  Hence, save the contents of \topmark at the beginning of
-% the output routine.  The saved contents are valid until we actually
-% \shipout a page.
-%
-% (We used to run a short output routine to actually set \topmark and 
-% \firstmark to the right values, but if this was called with an empty page 
-% containing whatsits for writing index entries, the whatsits would be thrown 
-% away and the index auxiliary file would remain empty.)
-%
-\newtoks\savedtopmark
-\newif\iftopmarksaved
-\topmarksavedtrue
-\def\savetopmark{%
-  \iftopmarksaved\else
-    \global\savedtopmark=\expandafter{\topmark}%
-    \global\topmarksavedtrue
-  \fi
-}
-
-% \onepageout takes a vbox as an argument.
-% \shipout a vbox for a single page, adding an optional header, footer
-% and footnote.  This also causes index entries for this page to be written
-% to the auxiliary files.
-%
-\def\onepageout#1{%
-  \hoffset=\normaloffset
-  %
-  \ifodd\pageno  \advance\hoffset by \bindingoffset
-  \else \advance\hoffset by -\bindingoffset\fi
-  %
-  % Retrieve the information for the headings from the marks in the page,
-  % and call Plain TeX's \makeheadline and \makefootline, which use the
-  % values in \headline and \footline.
-  %
-  % This is used to check if we are on the first page of a chapter.
-  \ifcase1\the\savedtopmark\fi
-  \let\prevchaptername\thischaptername
-  \ifcase0\firstmark\fi
-  \let\curchaptername\thischaptername
-  %
-  \ifodd\pageno \getoddheadingmarks \else \getevenheadingmarks \fi
-  %
-  \ifx\curchaptername\prevchaptername
-    \let\thischapterheading\thischapter
-  \else
-    % \thischapterheading is the same as \thischapter except it is blank
-    % for the first page of a chapter.  This is to prevent the chapter name 
-    % being shown twice.
-    \def\thischapterheading{}%
-  \fi
-  %
-  % Common context changes for both heading and footing.
-  % Do this outside of the \shipout so @code etc. will be expanded in
-  % the headline as they should be, not taken literally (outputting ''code).
-  \def\commmonheadfootline{\let\hsize=\txipagewidth \texinfochars}
-  %
-  \global\setbox\headlinebox = \vbox{\commmonheadfootline \makeheadline}%
-  %
-  \ifodd\pageno \getoddfootingmarks \else \getevenfootingmarks \fi
-  \global\setbox\footlinebox = \vbox{\commmonheadfootline \makefootline}%
-  %
-  {%
-    % Set context for writing to auxiliary files like index files.
-    % Have to do this stuff outside the \shipout because we want it to
-    % take effect in \write's, yet the group defined by the \vbox ends
-    % before the \shipout runs.
-    %
-    \atdummies         % don't expand commands in the output.
-    \turnoffactive
-    \shipout\vbox{%
-      % Do this early so pdf references go to the beginning of the page.
-      \ifpdfmakepagedest \pdfdest name{\the\pageno} xyz\fi
-      %
-      \unvbox\headlinebox
-      \pagebody{#1}%
-      \ifdim\ht\footlinebox > 0pt
-        % Only leave this space if the footline is nonempty.
-        % (We lessened \vsize for it in \oddfootingyyy.)
-        % The \baselineskip=24pt in plain's \makefootline has no effect.
-        \vskip 24pt
-        \unvbox\footlinebox
-      \fi
-      %
-    }%
-  }%
-  \global\topmarksavedfalse
-  \advancepageno
-  \ifnum\outputpenalty>-20000 \else\dosupereject\fi
-}
-
-\newinsert\margin \dimen\margin=\maxdimen
-
-% Main part of page, including any footnotes
-\def\pagebody#1{\vbox to\txipageheight{\boxmaxdepth=\maxdepth #1}}
-{\catcode`\@ =11
-\gdef\pagecontents#1{\ifvoid\topins\else\unvbox\topins\fi
-% marginal hacks, juha at viisa.uucp (Juha Takala)
-\ifvoid\margin\else % marginal info is present
-  \rlap{\kern\hsize\vbox to\z@{\kern1pt\box\margin \vss}}\fi
-\dimen@=\dp#1\relax \unvbox#1\relax
-\ifvoid\footins\else\vskip\skip\footins\footnoterule \unvbox\footins\fi
-\ifr at ggedbottom \kern-\dimen@ \vfil \fi}
-}
-
-
-% Argument parsing
-
-% Parse an argument, then pass it to #1.  The argument is the rest of
-% the input line (except we remove a trailing comment).  #1 should be a
-% macro which expects an ordinary undelimited TeX argument.
-% For example, \def\foo{\parsearg\fooxxx}.
-%
-\def\parsearg{\parseargusing{}}
-\def\parseargusing#1#2{%
-  \def\argtorun{#2}%
-  \begingroup
-    \obeylines
-    \spaceisspace
-    #1%
-    \parseargline\empty% Insert the \empty token, see \finishparsearg below.
-}
-
-{\obeylines %
-  \gdef\parseargline#1^^M{%
-    \endgroup % End of the group started in \parsearg.
-    \argremovecomment #1\comment\ArgTerm%
-  }%
-}
-
-% First remove any @comment, then any @c comment.  Pass the result on to 
-% \argcheckspaces.
-\def\argremovecomment#1\comment#2\ArgTerm{\argremovec #1\c\ArgTerm}
-\def\argremovec#1\c#2\ArgTerm{\argcheckspaces#1\^^M\ArgTerm}
-
-% Each occurrence of `\^^M' or `<space>\^^M' is replaced by a single space.
-%
-% \argremovec might leave us with trailing space, e.g.,
-%    @end itemize  @c foo
-% This space token undergoes the same procedure and is eventually removed
-% by \finishparsearg.
-%
-\def\argcheckspaces#1\^^M{\argcheckspacesX#1\^^M \^^M}
-\def\argcheckspacesX#1 \^^M{\argcheckspacesY#1\^^M}
-\def\argcheckspacesY#1\^^M#2\^^M#3\ArgTerm{%
-  \def\temp{#3}%
-  \ifx\temp\empty
-    % Do not use \next, perhaps the caller of \parsearg uses it; reuse \temp:
-    \let\temp\finishparsearg
-  \else
-    \let\temp\argcheckspaces
-  \fi
-  % Put the space token in:
-  \temp#1 #3\ArgTerm
-}
-
-% If a _delimited_ argument is enclosed in braces, they get stripped; so
-% to get _exactly_ the rest of the line, we had to prevent such situation.
-% We prepended an \empty token at the very beginning and we expand it now,
-% just before passing the control to \argtorun.
-% (Similarly, we have to think about #3 of \argcheckspacesY above: it is
-% either the null string, or it ends with \^^M---thus there is no danger
-% that a pair of braces would be stripped.
-%
-% But first, we have to remove the trailing space token.
-%
-\def\finishparsearg#1 \ArgTerm{\expandafter\argtorun\expandafter{#1}}
-
-
-% \parseargdef - define a command taking an argument on the line
-%
-% \parseargdef\foo{...}
-%	is roughly equivalent to
-% \def\foo{\parsearg\Xfoo}
-% \def\Xfoo#1{...}
-\def\parseargdef#1{%
-  \expandafter \doparseargdef \csname\string#1\endcsname #1%
-}
-\def\doparseargdef#1#2{%
-  \def#2{\parsearg#1}%
-  \def#1##1%
-}
-
-% Several utility definitions with active space:
-{
-  \obeyspaces
-  \gdef\obeyedspace{ }
-
-  % Make each space character in the input produce a normal interword
-  % space in the output.  Don't allow a line break at this space, as this
-  % is used only in environments like @example, where each line of input
-  % should produce a line of output anyway.
-  %
-  \gdef\sepspaces{\obeyspaces\let =\tie}
-
-  % If an index command is used in an @example environment, any spaces
-  % therein should become regular spaces in the raw index file, not the
-  % expansion of \tie (\leavevmode \penalty \@M \ ).
-  \gdef\unsepspaces{\let =\space}
-}
-
-
-\def\flushcr{\ifx\par\lisppar \def\next##1{}\else \let\next=\relax \fi \next}
-
-% Define the framework for environments in texinfo.tex.  It's used like this:
-%
-%   \envdef\foo{...}
-%   \def\Efoo{...}
-%
-% It's the responsibility of \envdef to insert \begingroup before the
-% actual body; @end closes the group after calling \Efoo.  \envdef also
-% defines \thisenv, so the current environment is known; @end checks
-% whether the environment name matches.  The \checkenv macro can also be
-% used to check whether the current environment is the one expected.
-%
-% Non-false conditionals (@iftex, @ifset) don't fit into this, so they
-% are not treated as environments; they don't open a group.  (The
-% implementation of @end takes care not to call \endgroup in this
-% special case.)
-
-
-% At run-time, environments start with this:
-\def\startenvironment#1{\begingroup\def\thisenv{#1}}
-% initialize
-\let\thisenv\empty
-
-% ... but they get defined via ``\envdef\foo{...}'':
-\long\def\envdef#1#2{\def#1{\startenvironment#1#2}}
-\def\envparseargdef#1#2{\parseargdef#1{\startenvironment#1#2}}
-
-% Check whether we're in the right environment:
-\def\checkenv#1{%
-  \def\temp{#1}%
-  \ifx\thisenv\temp
-  \else
-    \badenverr
-  \fi
-}
-
-% Environment mismatch, #1 expected:
-\def\badenverr{%
-  \errhelp = \EMsimple
-  \errmessage{This command can appear only \inenvironment\temp,
-    not \inenvironment\thisenv}%
-}
-\def\inenvironment#1{%
-  \ifx#1\empty
-    outside of any environment%
-  \else
-    in environment \expandafter\string#1%
-  \fi
-}
-
-% @end foo executes the definition of \Efoo.
-% But first, it executes a specialized version of \checkenv
-%
-\parseargdef\end{%
-  \if 1\csname iscond.#1\endcsname
-  \else
-    % The general wording of \badenverr may not be ideal.
-    \expandafter\checkenv\csname#1\endcsname
-    \csname E#1\endcsname
-    \endgroup
-  \fi
-}
-
-\newhelp\EMsimple{Press RETURN to continue.}
-
-
-% Be sure we're in horizontal mode when doing a tie, since we make space
-% equivalent to this in @example-like environments. Otherwise, a space
-% at the beginning of a line will start with \penalty -- and
-% since \penalty is valid in vertical mode, we'd end up putting the
-% penalty on the vertical list instead of in the new paragraph.
-{\catcode`@ = 11
- % Avoid using \@M directly, because that causes trouble
- % if the definition is written into an index file.
- \global\let\tiepenalty = \@M
- \gdef\tie{\leavevmode\penalty\tiepenalty\ }
-}
-
-% @: forces normal size whitespace following.
-\def\:{\spacefactor=1000 }
-
-% @* forces a line break.
-\def\*{\unskip\hfil\break\hbox{}\ignorespaces}
-
-% @/ allows a line break.
-\let\/=\allowbreak
-
-% @. is an end-of-sentence period.
-\def\.{.\spacefactor=\endofsentencespacefactor\space}
-
-% @! is an end-of-sentence bang.
-\def\!{!\spacefactor=\endofsentencespacefactor\space}
-
-% @? is an end-of-sentence query.
-\def\?{?\spacefactor=\endofsentencespacefactor\space}
-
-% @frenchspacing on|off  says whether to put extra space after punctuation.
-%
-\def\onword{on}
-\def\offword{off}
-%
-\parseargdef\frenchspacing{%
-  \def\temp{#1}%
-  \ifx\temp\onword \plainfrenchspacing
-  \else\ifx\temp\offword \plainnonfrenchspacing
-  \else
-    \errhelp = \EMsimple
-    \errmessage{Unknown @frenchspacing option `\temp', must be on|off}%
-  \fi\fi
-}
-
-% @w prevents a word break.  Without the \leavevmode, @w at the
-% beginning of a paragraph, when TeX is still in vertical mode, would
-% produce a whole line of output instead of starting the paragraph.
-\def\w#1{\leavevmode\hbox{#1}}
-
-% @group ... @end group forces ... to be all on one page, by enclosing
-% it in a TeX vbox.  We use \vtop instead of \vbox to construct the box
-% to keep its height that of a normal line.  According to the rules for
-% \topskip (p.114 of the TeXbook), the glue inserted is
-% max (\topskip - \ht (first item), 0).  If that height is large,
-% therefore, no glue is inserted, and the space between the headline and
-% the text is small, which looks bad.
-%
-% Another complication is that the group might be very large.  This can
-% cause the glue on the previous page to be unduly stretched, because it
-% does not have much material.  In this case, it's better to add an
-% explicit \vfill so that the extra space is at the bottom.  The
-% threshold for doing this is if the group is more than \vfilllimit
-% percent of a page (\vfilllimit can be changed inside of @tex).
-%
-\newbox\groupbox
-\def\vfilllimit{0.7}
-%
-\envdef\group{%
-  \ifnum\catcode`\^^M=\active \else
-    \errhelp = \groupinvalidhelp
-    \errmessage{@group invalid in context where filling is enabled}%
-  \fi
-  \startsavinginserts
-  %
-  \setbox\groupbox = \vtop\bgroup
-    % Do @comment since we are called inside an environment such as
-    % @example, where each end-of-line in the input causes an
-    % end-of-line in the output.  We don't want the end-of-line after
-    % the `@group' to put extra space in the output.  Since @group
-    % should appear on a line by itself (according to the Texinfo
-    % manual), we don't worry about eating any user text.
-    \comment
-}
-%
-% The \vtop produces a box with normal height and large depth; thus, TeX puts
-% \baselineskip glue before it, and (when the next line of text is done)
-% \lineskip glue after it.  Thus, space below is not quite equal to space
-% above.  But it's pretty close.
-\def\Egroup{%
-    % To get correct interline space between the last line of the group
-    % and the first line afterwards, we have to propagate \prevdepth.
-    \endgraf % Not \par, as it may have been set to \lisppar.
-    \global\dimen1 = \prevdepth
-  \egroup           % End the \vtop.
-  \addgroupbox
-  \prevdepth = \dimen1
-  \checkinserts
-}
-
-\def\addgroupbox{
-  % \dimen0 is the vertical size of the group's box.
-  \dimen0 = \ht\groupbox  \advance\dimen0 by \dp\groupbox
-  % \dimen2 is how much space is left on the page (more or less).
-  \dimen2 = \txipageheight   \advance\dimen2 by -\pagetotal
-  % if the group doesn't fit on the current page, and it's a big big
-  % group, force a page break.
-  \ifdim \dimen0 > \dimen2
-    \ifdim \pagetotal < \vfilllimit\txipageheight
-      \page
-    \fi
-  \fi
-  \box\groupbox
-}
-
-%
-% TeX puts in an \escapechar (i.e., `@') at the beginning of the help
-% message, so this ends up printing `@group can only ...'.
-%
-\newhelp\groupinvalidhelp{%
-group can only be used in environments such as @example,^^J%
-where each line of input produces a line of output.}
-
-% @need space-in-mils
-% forces a page break if there is not space-in-mils remaining.
-
-\newdimen\mil  \mil=0.001in
-
-\parseargdef\need{%
-  % Ensure vertical mode, so we don't make a big box in the middle of a
-  % paragraph.
-  \par
-  %
-  % If the @need value is less than one line space, it's useless.
-  \dimen0 = #1\mil
-  \dimen2 = \ht\strutbox
-  \advance\dimen2 by \dp\strutbox
-  \ifdim\dimen0 > \dimen2
-    %
-    % Do a \strut just to make the height of this box be normal, so the
-    % normal leading is inserted relative to the preceding line.
-    % And a page break here is fine.
-    \vtop to #1\mil{\strut\vfil}%
-    %
-    % TeX does not even consider page breaks if a penalty added to the
-    % main vertical list is 10000 or more.  But in order to see if the
-    % empty box we just added fits on the page, we must make it consider
-    % page breaks.  On the other hand, we don't want to actually break the
-    % page after the empty box.  So we use a penalty of 9999.
-    %
-    % There is an extremely small chance that TeX will actually break the
-    % page at this \penalty, if there are no other feasible breakpoints in
-    % sight.  (If the user is using lots of big @group commands, which
-    % almost-but-not-quite fill up a page, TeX will have a hard time doing
-    % good page breaking, for example.)  However, I could not construct an
-    % example where a page broke at this \penalty; if it happens in a real
-    % document, then we can reconsider our strategy.
-    \penalty9999
-    %
-    % Back up by the size of the box, whether we did a page break or not.
-    \kern -#1\mil
-    %
-    % Do not allow a page break right after this kern.
-    \nobreak
-  \fi
-}
-
-% @br   forces paragraph break (and is undocumented).
-
-\let\br = \par
-
-% @page forces the start of a new page.
-%
-\def\page{\par\vfill\supereject}
-
-% @exdent text....
-% outputs text on separate line in roman font, starting at standard page margin
-
-% This records the amount of indent in the innermost environment.
-% That's how much \exdent should take out.
-\newskip\exdentamount
-
-% This defn is used inside fill environments such as @defun.
-\parseargdef\exdent{\hfil\break\hbox{\kern -\exdentamount{\rm#1}}\hfil\break}
-
-% This defn is used inside nofill environments such as @example.
-\parseargdef\nofillexdent{{\advance \leftskip by -\exdentamount
-  \leftline{\hskip\leftskip{\rm#1}}}}
-
-% @inmargin{WHICH}{TEXT} puts TEXT in the WHICH margin next to the current
-% paragraph.  For more general purposes, use the \margin insertion
-% class.  WHICH is `l' or `r'.  Not documented, written for gawk manual.
-%
-\newskip\inmarginspacing \inmarginspacing=1cm
-\def\strutdepth{\dp\strutbox}
-%
-\def\doinmargin#1#2{\strut\vadjust{%
-  \nobreak
-  \kern-\strutdepth
-  \vtop to \strutdepth{%
-    \baselineskip=\strutdepth
-    \vss
-    % if you have multiple lines of stuff to put here, you'll need to
-    % make the vbox yourself of the appropriate size.
-    \ifx#1l%
-      \llap{\ignorespaces #2\hskip\inmarginspacing}%
-    \else
-      \rlap{\hskip\hsize \hskip\inmarginspacing \ignorespaces #2}%
-    \fi
-    \null
-  }%
-}}
-\def\inleftmargin{\doinmargin l}
-\def\inrightmargin{\doinmargin r}
-%
-% @inmargin{TEXT [, RIGHT-TEXT]}
-% (if RIGHT-TEXT is given, use TEXT for left page, RIGHT-TEXT for right;
-% else use TEXT for both).
-%
-\def\inmargin#1{\parseinmargin #1,,\finish}
-\def\parseinmargin#1,#2,#3\finish{% not perfect, but better than nothing.
-  \setbox0 = \hbox{\ignorespaces #2}%
-  \ifdim\wd0 > 0pt
-    \def\lefttext{#1}%  have both texts
-    \def\righttext{#2}%
-  \else
-    \def\lefttext{#1}%  have only one text
-    \def\righttext{#1}%
-  \fi
-  %
-  \ifodd\pageno
-    \def\temp{\inrightmargin\righttext}% odd page -> outside is right margin
-  \else
-    \def\temp{\inleftmargin\lefttext}%
-  \fi
-  \temp
-}
-
-% @include FILE -- \input text of FILE.
-%
-\def\include{\parseargusing\filenamecatcodes\includezzz}
-\def\includezzz#1{%
-  \pushthisfilestack
-  \def\thisfile{#1}%
-  {%
-    \makevalueexpandable  % we want to expand any @value in FILE.
-    \turnoffactive        % and allow special characters in the expansion
-    \indexnofonts         % Allow `@@' and other weird things in file names.
-    \wlog{texinfo.tex: doing @include of #1^^J}%
-    \edef\temp{\noexpand\input #1 }%
-    %
-    % This trickery is to read FILE outside of a group, in case it makes
-    % definitions, etc.
-    \expandafter
-  }\temp
-  \popthisfilestack
-}
-\def\filenamecatcodes{%
-  \catcode`\\=\other
-  \catcode`~=\other
-  \catcode`^=\other
-  \catcode`_=\other
-  \catcode`|=\other
-  \catcode`<=\other
-  \catcode`>=\other
-  \catcode`+=\other
-  \catcode`-=\other
-  \catcode`\`=\other
-  \catcode`\'=\other
-}
-
-\def\pushthisfilestack{%
-  \expandafter\pushthisfilestackX\popthisfilestack\StackTerm
-}
-\def\pushthisfilestackX{%
-  \expandafter\pushthisfilestackY\thisfile\StackTerm
-}
-\def\pushthisfilestackY #1\StackTerm #2\StackTerm {%
-  \gdef\popthisfilestack{\gdef\thisfile{#1}\gdef\popthisfilestack{#2}}%
-}
-
-\def\popthisfilestack{\errthisfilestackempty}
-\def\errthisfilestackempty{\errmessage{Internal error:
-  the stack of filenames is empty.}}
-%
-\def\thisfile{}
-
-% @center line
-% outputs that line, centered.
-%
-\parseargdef\center{%
-  \ifhmode
-    \let\centersub\centerH
-  \else
-    \let\centersub\centerV
-  \fi
-  \centersub{\hfil \ignorespaces#1\unskip \hfil}%
-  \let\centersub\relax % don't let the definition persist, just in case
-}
-\def\centerH#1{{%
-  \hfil\break
-  \advance\hsize by -\leftskip
-  \advance\hsize by -\rightskip
-  \line{#1}%
-  \break
-}}
-%
-\newcount\centerpenalty
-\def\centerV#1{%
-  % The idea here is the same as in \startdefun, \cartouche, etc.: if
-  % @center is the first thing after a section heading, we need to wipe
-  % out the negative parskip inserted by \sectionheading, but still
-  % prevent a page break here.
-  \centerpenalty = \lastpenalty
-  \ifnum\centerpenalty>10000 \vskip\parskip \fi
-  \ifnum\centerpenalty>9999 \penalty\centerpenalty \fi
-  \line{\kern\leftskip #1\kern\rightskip}%
-}
-
-% @sp n   outputs n lines of vertical space
-%
-\parseargdef\sp{\vskip #1\baselineskip}
-
-% @comment ...line which is ignored...
-% @c is the same as @comment
-% @ignore ... @end ignore  is another way to write a comment
-
-
-\def\c{\begingroup \catcode`\^^M=\active%
-\catcode`\@=\other \catcode`\{=\other \catcode`\}=\other%
-\cxxx}
-{\catcode`\^^M=\active \gdef\cxxx#1^^M{\endgroup}}
-%
-\let\comment\c
-
-% @paragraphindent NCHARS
-% We'll use ems for NCHARS, close enough.
-% NCHARS can also be the word `asis' or `none'.
-% We cannot feasibly implement @paragraphindent asis, though.
-%
-\def\asisword{asis} % no translation, these are keywords
-\def\noneword{none}
-%
-\parseargdef\paragraphindent{%
-  \def\temp{#1}%
-  \ifx\temp\asisword
-  \else
-    \ifx\temp\noneword
-      \defaultparindent = 0pt
-    \else
-      \defaultparindent = #1em
-    \fi
-  \fi
-  \parindent = \defaultparindent
-}
-
-% @exampleindent NCHARS
-% We'll use ems for NCHARS like @paragraphindent.
-% It seems @exampleindent asis isn't necessary, but
-% I preserve it to make it similar to @paragraphindent.
-\parseargdef\exampleindent{%
-  \def\temp{#1}%
-  \ifx\temp\asisword
-  \else
-    \ifx\temp\noneword
-      \lispnarrowing = 0pt
-    \else
-      \lispnarrowing = #1em
-    \fi
-  \fi
-}
-
-% @firstparagraphindent WORD
-% If WORD is `none', then suppress indentation of the first paragraph
-% after a section heading.  If WORD is `insert', then do indent at such
-% paragraphs.
-%
-% The paragraph indentation is suppressed or not by calling
-% \suppressfirstparagraphindent, which the sectioning commands do.
-% We switch the definition of this back and forth according to WORD.
-% By default, we suppress indentation.
-%
-\def\suppressfirstparagraphindent{\dosuppressfirstparagraphindent}
-\def\insertword{insert}
-%
-\parseargdef\firstparagraphindent{%
-  \def\temp{#1}%
-  \ifx\temp\noneword
-    \let\suppressfirstparagraphindent = \dosuppressfirstparagraphindent
-  \else\ifx\temp\insertword
-    \let\suppressfirstparagraphindent = \relax
-  \else
-    \errhelp = \EMsimple
-    \errmessage{Unknown @firstparagraphindent option `\temp'}%
-  \fi\fi
-}
-
-% Here is how we actually suppress indentation.  Redefine \everypar to
-% \kern backwards by \parindent, and then reset itself to empty.
-%
-% We also make \indent itself not actually do anything until the next
-% paragraph.
-%
-\gdef\dosuppressfirstparagraphindent{%
-  \gdef\indent  {\restorefirstparagraphindent \indent}%
-  \gdef\noindent{\restorefirstparagraphindent \noindent}%
-  \global\everypar = {\kern -\parindent \restorefirstparagraphindent}%
-}
-%
-\gdef\restorefirstparagraphindent{%
-  \global\let\indent = \ptexindent
-  \global\let\noindent = \ptexnoindent
-  \global\everypar = {}%
-}
-
-
-% @refill is a no-op.
-\let\refill=\relax
-
-% @setfilename INFO-FILENAME - ignored
-\let\setfilename=\comment
-
-% @bye.
-\outer\def\bye{\pagealignmacro\tracingstats=1\ptexend}
-
-
-\message{pdf,}
-% adobe `portable' document format
-\newcount\tempnum
-\newcount\lnkcount
-\newtoks\filename
-\newcount\filenamelength
-\newcount\pgn
-\newtoks\toksA
-\newtoks\toksB
-\newtoks\toksC
-\newtoks\toksD
-\newbox\boxA
-\newbox\boxB
-\newcount\countA
-\newif\ifpdf
-\newif\ifpdfmakepagedest
-
-%
-% For LuaTeX
-%
-
-\newif\iftxiuseunicodedestname
-\txiuseunicodedestnamefalse % For pdfTeX etc.
-
-\ifx\luatexversion\thisisundefined
-\else
-  % Use Unicode destination names
-  \txiuseunicodedestnametrue
-  % Escape PDF strings with converting UTF-16 from UTF-8
-  \begingroup
-    \catcode`\%=12
-    \directlua{
-      function UTF16oct(str)
-        tex.sprint(string.char(0x5c) .. '376' .. string.char(0x5c) .. '377')
-        for c in string.utfvalues(str) do
-          if c < 0x10000 then
-            tex.sprint(
-              string.format(string.char(0x5c) .. string.char(0x25) .. '03o' ..
-                            string.char(0x5c) .. string.char(0x25) .. '03o',
-                            (c / 256), (c % 256)))
-          else
-            c = c - 0x10000
-            local c_hi = c / 1024 + 0xd800
-            local c_lo = c % 1024 + 0xdc00
-            tex.sprint(
-              string.format(string.char(0x5c) .. string.char(0x25) .. '03o' ..
-                            string.char(0x5c) .. string.char(0x25) .. '03o' ..
-                            string.char(0x5c) .. string.char(0x25) .. '03o' ..
-                            string.char(0x5c) .. string.char(0x25) .. '03o',
-                            (c_hi / 256), (c_hi % 256),
-                            (c_lo / 256), (c_lo % 256)))
-          end
-        end
-      end
-    }
-  \endgroup
-  \def\pdfescapestrutfsixteen#1{\directlua{UTF16oct('\luaescapestring{#1}')}}
-  % Escape PDF strings without converting
-  \begingroup
-    \directlua{
-      function PDFescstr(str)
-        for c in string.bytes(str) do
-          if c <= 0x20 or c >= 0x80 or c == 0x28 or c == 0x29 or c == 0x5c then
-            tex.sprint(
-              string.format(string.char(0x5c) .. string.char(0x25) .. '03o',
-                            c))
-          else
-            tex.sprint(string.char(c))
-          end
-        end
-      end
-    }
-  \endgroup
-  \def\pdfescapestring#1{\directlua{PDFescstr('\luaescapestring{#1}')}}
-  \ifnum\luatexversion>84
-    % For LuaTeX >= 0.85
-    \def\pdfdest{\pdfextension dest}
-    \let\pdfoutput\outputmode
-    \def\pdfliteral{\pdfextension literal}
-    \def\pdfcatalog{\pdfextension catalog}
-    \def\pdftexversion{\numexpr\pdffeedback version\relax}
-    \let\pdfximage\saveimageresource
-    \let\pdfrefximage\useimageresource
-    \let\pdflastximage\lastsavedimageresourceindex
-    \def\pdfendlink{\pdfextension endlink\relax}
-    \def\pdfoutline{\pdfextension outline}
-    \def\pdfstartlink{\pdfextension startlink}
-    \def\pdffontattr{\pdfextension fontattr}
-    \def\pdfobj{\pdfextension obj}
-    \def\pdflastobj{\numexpr\pdffeedback lastobj\relax}
-    \let\pdfpagewidth\pagewidth
-    \let\pdfpageheight\pageheight
-    \edef\pdfhorigin{\pdfvariable horigin}
-    \edef\pdfvorigin{\pdfvariable vorigin}
-  \fi
-\fi
-
-% when pdftex is run in dvi mode, \pdfoutput is defined (so \pdfoutput=1
-% can be set).  So we test for \relax and 0 as well as being undefined.
-\ifx\pdfoutput\thisisundefined
-\else
-  \ifx\pdfoutput\relax
-  \else
-    \ifcase\pdfoutput
-    \else
-      \pdftrue
-    \fi
-  \fi
-\fi
-
-\newif\ifpdforxetex
-\pdforxetexfalse
-\ifpdf
-  \pdforxetextrue
-\fi
-\ifx\XeTeXrevision\thisisundefined\else
-  \pdforxetextrue
-\fi
-
-
-% PDF uses PostScript string constants for the names of xref targets,
-% for display in the outlines, and in other places.  Thus, we have to
-% double any backslashes.  Otherwise, a name like "\node" will be
-% interpreted as a newline (\n), followed by o, d, e.  Not good.
-% 
-% See http://www.ntg.nl/pipermail/ntg-pdftex/2004-July/000654.html and
-% related messages.  The final outcome is that it is up to the TeX user
-% to double the backslashes and otherwise make the string valid, so
-% that's what we do.  pdftex 1.30.0 (ca.2005) introduced a primitive to
-% do this reliably, so we use it.
-
-% #1 is a control sequence in which to do the replacements,
-% which we \xdef.
-\def\txiescapepdf#1{%
-  \ifx\pdfescapestring\thisisundefined
-    % No primitive available; should we give a warning or log?
-    % Many times it won't matter.
-    \xdef#1{#1}%
-  \else
-    % The expandable \pdfescapestring primitive escapes parentheses,
-    % backslashes, and other special chars.
-    \xdef#1{\pdfescapestring{#1}}%
-  \fi
-}
-\def\txiescapepdfutfsixteen#1{%
-  \ifx\pdfescapestrutfsixteen\thisisundefined
-    % No UTF-16 converting macro available.
-    \txiescapepdf{#1}%
-  \else
-    \xdef#1{\pdfescapestrutfsixteen{#1}}%
-  \fi
-}
-
-\newhelp\nopdfimagehelp{Texinfo supports .png, .jpg, .jpeg, and .pdf images
-with PDF output, and none of those formats could be found.  (.eps cannot
-be supported due to the design of the PDF format; use regular TeX (DVI
-output) for that.)}
-
-\ifpdf
-  %
-  % Color manipulation macros using ideas from pdfcolor.tex,
-  % except using rgb instead of cmyk; the latter is said to render as a
-  % very dark gray on-screen and a very dark halftone in print, instead
-  % of actual black. The dark red here is dark enough to print on paper as
-  % nearly black, but still distinguishable for online viewing.  We use
-  % black by default, though.
-  \def\rgbDarkRed{0.50 0.09 0.12}
-  \def\rgbBlack{0 0 0}
-  %
-  % rg sets the color for filling (usual text, etc.);
-  % RG sets the color for stroking (thin rules, e.g., normal _'s).
-  \def\pdfsetcolor#1{\pdfliteral{#1 rg  #1 RG}}
-  %
-  % Set color, and create a mark which defines \thiscolor accordingly,
-  % so that \makeheadline knows which color to restore.
-  \def\setcolor#1{%
-    \xdef\currentcolordefs{\gdef\noexpand\thiscolor{#1}}%
-    \domark
-    \pdfsetcolor{#1}%
-  }
-  %
-  \def\maincolor{\rgbBlack}
-  \pdfsetcolor{\maincolor}
-  \edef\thiscolor{\maincolor}
-  \def\currentcolordefs{}
-  %
-  \def\makefootline{%
-    \baselineskip24pt
-    \line{\pdfsetcolor{\maincolor}\the\footline}%
-  }
-  %
-  \def\makeheadline{%
-    \vbox to 0pt{%
-      \vskip-22.5pt
-      \line{%
-        \vbox to8.5pt{}%
-        % Extract \thiscolor definition from the marks.
-        \getcolormarks
-        % Typeset the headline with \maincolor, then restore the color.
-        \pdfsetcolor{\maincolor}\the\headline\pdfsetcolor{\thiscolor}%
-      }%
-      \vss
-    }%
-    \nointerlineskip
-  }
-  %
-  %
-  \pdfcatalog{/PageMode /UseOutlines}
-  %
-  % #1 is image name, #2 width (might be empty/whitespace), #3 height (ditto).
-  \def\dopdfimage#1#2#3{%
-    \def\pdfimagewidth{#2}\setbox0 = \hbox{\ignorespaces #2}%
-    \def\pdfimageheight{#3}\setbox2 = \hbox{\ignorespaces #3}%
-    %
-    % pdftex (and the PDF format) support .pdf, .png, .jpg (among
-    % others).  Let's try in that order, PDF first since if
-    % someone has a scalable image, presumably better to use that than a
-    % bitmap.
-    \let\pdfimgext=\empty
-    \begingroup
-      \openin 1 #1.pdf \ifeof 1
-        \openin 1 #1.PDF \ifeof 1
-          \openin 1 #1.png \ifeof 1
-            \openin 1 #1.jpg \ifeof 1
-              \openin 1 #1.jpeg \ifeof 1
-                \openin 1 #1.JPG \ifeof 1
-                  \errhelp = \nopdfimagehelp
-                  \errmessage{Could not find image file #1 for pdf}%
-                \else \gdef\pdfimgext{JPG}%
-                \fi
-              \else \gdef\pdfimgext{jpeg}%
-              \fi
-            \else \gdef\pdfimgext{jpg}%
-            \fi
-          \else \gdef\pdfimgext{png}%
-          \fi
-        \else \gdef\pdfimgext{PDF}%
-        \fi
-      \else \gdef\pdfimgext{pdf}%
-      \fi
-      \closein 1
-    \endgroup
-    %
-    % without \immediate, ancient pdftex seg faults when the same image is
-    % included twice.  (Version 3.14159-pre-1.0-unofficial-20010704.)
-    \ifnum\pdftexversion < 14
-      \immediate\pdfimage
-    \else
-      \immediate\pdfximage
-    \fi
-      \ifdim \wd0 >0pt width \pdfimagewidth \fi
-      \ifdim \wd2 >0pt height \pdfimageheight \fi
-      \ifnum\pdftexversion<13
-         #1.\pdfimgext
-       \else
-         {#1.\pdfimgext}%
-       \fi
-    \ifnum\pdftexversion < 14 \else
-      \pdfrefximage \pdflastximage
-    \fi}
-  %
-  \def\setpdfdestname#1{{%
-    % We have to set dummies so commands such as @code, and characters
-    % such as \, aren't expanded when present in a section title.
-    \indexnofonts
-    \makevalueexpandable
-    \turnoffactive
-    \iftxiuseunicodedestname
-      \ifx \declaredencoding \latone
-        % Pass through Latin-1 characters.
-        % LuaTeX with byte wise I/O converts Latin-1 characters to Unicode.
-      \else
-        \ifx \declaredencoding \utfeight
-          % Pass through Unicode characters.
-        \else
-          % Use ASCII approximations in destination names.
-          \passthroughcharsfalse
-        \fi
-      \fi
-    \else
-      % Use ASCII approximations in destination names.
-      \passthroughcharsfalse
-    \fi
-    \def\pdfdestname{#1}%
-    \txiescapepdf\pdfdestname
-  }}
-  %
-  \def\setpdfoutlinetext#1{{%
-    \indexnofonts
-    \makevalueexpandable
-    \turnoffactive
-    \ifx \declaredencoding \latone
-      % The PDF format can use an extended form of Latin-1 in bookmark
-      % strings.  See Appendix D of the PDF Reference, Sixth Edition, for
-      % the "PDFDocEncoding".
-      \passthroughcharstrue
-      % Pass through Latin-1 characters.
-      %   LuaTeX: Convert to Unicode
-      %   pdfTeX: Use Latin-1 as PDFDocEncoding
-      \def\pdfoutlinetext{#1}%
-    \else
-      \ifx \declaredencoding \utfeight
-        \ifx\luatexversion\thisisundefined
-          % For pdfTeX  with UTF-8.
-          % TODO: the PDF format can use UTF-16 in bookmark strings,
-          % but the code for this isn't done yet.
-          % Use ASCII approximations.
-          \passthroughcharsfalse
-          \def\pdfoutlinetext{#1}%
-        \else
-          % For LuaTeX with UTF-8.
-          % Pass through Unicode characters for title texts.
-          \passthroughcharstrue
-          \def\pdfoutlinetext{#1}%
-        \fi
-      \else
-        % For non-Latin-1 or non-UTF-8 encodings.
-        % Use ASCII approximations.
-        \passthroughcharsfalse
-        \def\pdfoutlinetext{#1}%
-      \fi
-    \fi
-    % LuaTeX: Convert to UTF-16
-    % pdfTeX: Use Latin-1 as PDFDocEncoding
-    \txiescapepdfutfsixteen\pdfoutlinetext
-  }}
-  %
-  \def\pdfmkdest#1{%
-    \setpdfdestname{#1}%
-    \safewhatsit{\pdfdest name{\pdfdestname} xyz}%
-  }
-  %
-  % used to mark target names; must be expandable.
-  \def\pdfmkpgn#1{#1}
-  %
-  % by default, use black for everything.
-  \def\urlcolor{\rgbBlack}
-  \def\linkcolor{\rgbBlack}
-  \def\endlink{\setcolor{\maincolor}\pdfendlink}
-  %
-  % Adding outlines to PDF; macros for calculating structure of outlines
-  % come from Petr Olsak
-  \def\expnumber#1{\expandafter\ifx\csname#1\endcsname\relax 0%
-    \else \csname#1\endcsname \fi}
-  \def\advancenumber#1{\tempnum=\expnumber{#1}\relax
-    \advance\tempnum by 1
-    \expandafter\xdef\csname#1\endcsname{\the\tempnum}}
-  %
-  % #1 is the section text, which is what will be displayed in the
-  % outline by the pdf viewer.  #2 is the pdf expression for the number
-  % of subentries (or empty, for subsubsections).  #3 is the node text,
-  % which might be empty if this toc entry had no corresponding node.
-  % #4 is the page number
-  %
-  \def\dopdfoutline#1#2#3#4{%
-    % Generate a link to the node text if that exists; else, use the
-    % page number.  We could generate a destination for the section
-    % text in the case where a section has no node, but it doesn't
-    % seem worth the trouble, since most documents are normally structured.
-    \setpdfoutlinetext{#1}
-    \setpdfdestname{#3}
-    \ifx\pdfdestname\empty
-      \def\pdfdestname{#4}%
-    \fi
-    %
-    \pdfoutline goto name{\pdfmkpgn{\pdfdestname}}#2{\pdfoutlinetext}%
-  }
-  %
-  \def\pdfmakeoutlines{%
-    \begingroup
-      % Read toc silently, to get counts of subentries for \pdfoutline.
-      \def\partentry##1##2##3##4{}% ignore parts in the outlines
-      \def\numchapentry##1##2##3##4{%
-	\def\thischapnum{##2}%
-	\def\thissecnum{0}%
-	\def\thissubsecnum{0}%
-      }%
-      \def\numsecentry##1##2##3##4{%
-	\advancenumber{chap\thischapnum}%
-	\def\thissecnum{##2}%
-	\def\thissubsecnum{0}%
-      }%
-      \def\numsubsecentry##1##2##3##4{%
-	\advancenumber{sec\thissecnum}%
-	\def\thissubsecnum{##2}%
-      }%
-      \def\numsubsubsecentry##1##2##3##4{%
-	\advancenumber{subsec\thissubsecnum}%
-      }%
-      \def\thischapnum{0}%
-      \def\thissecnum{0}%
-      \def\thissubsecnum{0}%
-      %
-      % use \def rather than \let here because we redefine \chapentry et
-      % al. a second time, below.
-      \def\appentry{\numchapentry}%
-      \def\appsecentry{\numsecentry}%
-      \def\appsubsecentry{\numsubsecentry}%
-      \def\appsubsubsecentry{\numsubsubsecentry}%
-      \def\unnchapentry{\numchapentry}%
-      \def\unnsecentry{\numsecentry}%
-      \def\unnsubsecentry{\numsubsecentry}%
-      \def\unnsubsubsecentry{\numsubsubsecentry}%
-      \readdatafile{toc}%
-      %
-      % Read toc second time, this time actually producing the outlines.
-      % The `-' means take the \expnumber as the absolute number of
-      % subentries, which we calculated on our first read of the .toc above.
-      %
-      % We use the node names as the destinations.
-      \def\numchapentry##1##2##3##4{%
-        \dopdfoutline{##1}{count-\expnumber{chap##2}}{##3}{##4}}%
-      \def\numsecentry##1##2##3##4{%
-        \dopdfoutline{##1}{count-\expnumber{sec##2}}{##3}{##4}}%
-      \def\numsubsecentry##1##2##3##4{%
-        \dopdfoutline{##1}{count-\expnumber{subsec##2}}{##3}{##4}}%
-      \def\numsubsubsecentry##1##2##3##4{% count is always zero
-        \dopdfoutline{##1}{}{##3}{##4}}%
-      %
-      % PDF outlines are displayed using system fonts, instead of
-      % document fonts.  Therefore we cannot use special characters,
-      % since the encoding is unknown.  For example, the eogonek from
-      % Latin 2 (0xea) gets translated to a | character.  Info from
-      % Staszek Wawrykiewicz, 19 Jan 2004 04:09:24 +0100.
-      %
-      % TODO this right, we have to translate 8-bit characters to
-      % their "best" equivalent, based on the @documentencoding.  Too
-      % much work for too little return.  Just use the ASCII equivalents
-      % we use for the index sort strings.
-      % 
-      \indexnofonts
-      \setupdatafile
-      % We can have normal brace characters in the PDF outlines, unlike
-      % Texinfo index files.  So set that up.
-      \def\{{\lbracecharliteral}%
-      \def\}{\rbracecharliteral}%
-      \catcode`\\=\active \otherbackslash
-      \input \tocreadfilename
-    \endgroup
-  }
-  {\catcode`[=1 \catcode`]=2
-   \catcode`{=\other \catcode`}=\other
-   \gdef\lbracecharliteral[{]%
-   \gdef\rbracecharliteral[}]%
-  ]
-  %
-  \def\skipspaces#1{\def\PP{#1}\def\D{|}%
-    \ifx\PP\D\let\nextsp\relax
-    \else\let\nextsp\skipspaces
-      \addtokens{\filename}{\PP}%
-      \advance\filenamelength by 1
-    \fi
-    \nextsp}
-  \def\getfilename#1{%
-    \filenamelength=0
-    % If we don't expand the argument now, \skipspaces will get
-    % snagged on things like "@value{foo}".
-    \edef\temp{#1}%
-    \expandafter\skipspaces\temp|\relax
-  }
-  \ifnum\pdftexversion < 14
-    \let \startlink \pdfannotlink
-  \else
-    \let \startlink \pdfstartlink
-  \fi
-  % make a live url in pdf output.
-  \def\pdfurl#1{%
-    \begingroup
-      % it seems we really need yet another set of dummies; have not
-      % tried to figure out what each command should do in the context
-      % of @url.  for now, just make @/ a no-op, that's the only one
-      % people have actually reported a problem with.
-      %
-      \normalturnoffactive
-      \def\@{@}%
-      \let\/=\empty
-      \makevalueexpandable
-      % do we want to go so far as to use \indexnofonts instead of just
-      % special-casing \var here?
-      \def\var##1{##1}%
-      %
-      \leavevmode\setcolor{\urlcolor}%
-      \startlink attr{/Border [0 0 0]}%
-        user{/Subtype /Link /A << /S /URI /URI (#1) >>}%
-    \endgroup}
-  % \pdfgettoks - Surround page numbers in #1 with @pdflink.  #1 may
-  % be a simple number, or a list of numbers in the case of an index
-  % entry.
-  \def\pdfgettoks#1.{\setbox\boxA=\hbox{\toksA={#1.}\toksB={}\maketoks}}
-  \def\addtokens#1#2{\edef\addtoks{\noexpand#1={\the#1#2}}\addtoks}
-  \def\adn#1{\addtokens{\toksC}{#1}\global\countA=1\let\next=\maketoks}
-  \def\poptoks#1#2|ENDTOKS|{\let\first=#1\toksD={#1}\toksA={#2}}
-  \def\maketoks{%
-    \expandafter\poptoks\the\toksA|ENDTOKS|\relax
-    \ifx\first0\adn0
-    \else\ifx\first1\adn1 \else\ifx\first2\adn2 \else\ifx\first3\adn3
-    \else\ifx\first4\adn4 \else\ifx\first5\adn5 \else\ifx\first6\adn6
-    \else\ifx\first7\adn7 \else\ifx\first8\adn8 \else\ifx\first9\adn9
-    \else
-      \ifnum0=\countA\else\makelink\fi
-      \ifx\first.\let\next=\done\else
-        \let\next=\maketoks
-        \addtokens{\toksB}{\the\toksD}
-        \ifx\first,\addtokens{\toksB}{\space}\fi
-      \fi
-    \fi\fi\fi\fi\fi\fi\fi\fi\fi\fi
-    \next}
-  \def\makelink{\addtokens{\toksB}%
-    {\noexpand\pdflink{\the\toksC}}\toksC={}\global\countA=0}
-  \def\pdflink#1{%
-    \startlink attr{/Border [0 0 0]} goto name{\pdfmkpgn{#1}}
-    \setcolor{\linkcolor}#1\endlink}
-  \def\done{\edef\st{\global\noexpand\toksA={\the\toksB}}\st}
-\else
-  % non-pdf mode
-  \let\pdfmkdest = \gobble
-  \let\pdfurl = \gobble
-  \let\endlink = \relax
-  \let\setcolor = \gobble
-  \let\pdfsetcolor = \gobble
-  \let\pdfmakeoutlines = \relax
-\fi  % \ifx\pdfoutput
-
-%
-% For XeTeX
-%
-\ifx\XeTeXrevision\thisisundefined
-\else
-  %
-  % XeTeX version check
-  %
-  \ifnum\strcmp{\the\XeTeXversion\XeTeXrevision}{0.99996}>-1
-    % TeX Live 2016 contains XeTeX 0.99996 and xdvipdfmx 20160307.
-    % It can use the `dvipdfmx:config' special (from TeX Live SVN r40941).
-    % For avoiding PDF destination name replacement, we use this special
-    % instead of xdvipdfmx's command line option `-C 0x0010'.
-    \special{dvipdfmx:config C 0x0010}
-    % XeTeX 0.99995+ comes with xdvipdfmx 20160307+.
-    % It can handle Unicode destination names for PDF.
-    \txiuseunicodedestnametrue
-  \else
-    % XeTeX < 0.99996 (TeX Live < 2016) cannot use the
-    % `dvipdfmx:config' special.
-    % So for avoiding PDF destination name replacement,
-    % xdvipdfmx's command line option `-C 0x0010' is necessary.
-    %
-    % XeTeX < 0.99995 can not handle Unicode destination names for PDF
-    % because xdvipdfmx 20150315 has a UTF-16 conversion issue.
-    % It is fixed by xdvipdfmx 20160106 (TeX Live SVN r39753).
-    \txiuseunicodedestnamefalse
-  \fi
-  %
-  % Color support
-  %
-  \def\rgbDarkRed{0.50 0.09 0.12}
-  \def\rgbBlack{0 0 0}
-  %
-  \def\pdfsetcolor#1{\special{pdf:scolor [#1]}}
-  %
-  % Set color, and create a mark which defines \thiscolor accordingly,
-  % so that \makeheadline knows which color to restore.
-  \def\setcolor#1{%
-    \xdef\currentcolordefs{\gdef\noexpand\thiscolor{#1}}%
-    \domark
-    \pdfsetcolor{#1}%
-  }
-  %
-  \def\maincolor{\rgbBlack}
-  \pdfsetcolor{\maincolor}
-  \edef\thiscolor{\maincolor}
-  \def\currentcolordefs{}
-  %
-  \def\makefootline{%
-    \baselineskip24pt
-    \line{\pdfsetcolor{\maincolor}\the\footline}%
-  }
-  %
-  \def\makeheadline{%
-    \vbox to 0pt{%
-      \vskip-22.5pt
-      \line{%
-        \vbox to8.5pt{}%
-        % Extract \thiscolor definition from the marks.
-        \getcolormarks
-        % Typeset the headline with \maincolor, then restore the color.
-        \pdfsetcolor{\maincolor}\the\headline\pdfsetcolor{\thiscolor}%
-      }%
-      \vss
-    }%
-    \nointerlineskip
-  }
-  %
-  % PDF outline support
-  %
-  % Emulate pdfTeX primitive
-  \def\pdfdest name#1 xyz{%
-    \special{pdf:dest (#1) [@thispage /XYZ @xpos @ypos null]}%
-  }
-  %
-  \def\setpdfdestname#1{{%
-    % We have to set dummies so commands such as @code, and characters
-    % such as \, aren't expanded when present in a section title.
-    \indexnofonts
-    \makevalueexpandable
-    \turnoffactive
-    \iftxiuseunicodedestname
-      % Pass through Unicode characters.
-    \else
-      % Use ASCII approximations in destination names.
-      \passthroughcharsfalse
-    \fi
-    \def\pdfdestname{#1}%
-    \txiescapepdf\pdfdestname
-  }}
-  %
-  \def\setpdfoutlinetext#1{{%
-    \turnoffactive
-    % Always use Unicode characters in title texts.
-    \def\pdfoutlinetext{#1}%
-    % For XeTeX, xdvipdfmx converts to UTF-16.
-    % So we do not convert.
-    \txiescapepdf\pdfoutlinetext
-  }}
-  %
-  \def\pdfmkdest#1{%
-    \setpdfdestname{#1}%
-    \safewhatsit{\pdfdest name{\pdfdestname} xyz}%
-  }
-  %
-  % by default, use black for everything.
-  \def\urlcolor{\rgbBlack}
-  \def\linkcolor{\rgbBlack}
-  \def\endlink{\setcolor{\maincolor}\pdfendlink}
-  %
-  \def\dopdfoutline#1#2#3#4{%
-    \setpdfoutlinetext{#1}
-    \setpdfdestname{#3}
-    \ifx\pdfdestname\empty
-      \def\pdfdestname{#4}%
-    \fi
-    %
-    \special{pdf:out [-] #2 << /Title (\pdfoutlinetext) /A
-      << /S /GoTo /D (\pdfdestname) >> >> }%
-  }
-  %
-  \def\pdfmakeoutlines{%
-    \begingroup
-      %
-      % For XeTeX, counts of subentries are not necessary.
-      % Therefore, we read toc only once.
-      %
-      % We use node names as destinations.
-      \def\partentry##1##2##3##4{}% ignore parts in the outlines
-      \def\numchapentry##1##2##3##4{%
-        \dopdfoutline{##1}{1}{##3}{##4}}%
-      \def\numsecentry##1##2##3##4{%
-        \dopdfoutline{##1}{2}{##3}{##4}}%
-      \def\numsubsecentry##1##2##3##4{%
-        \dopdfoutline{##1}{3}{##3}{##4}}%
-      \def\numsubsubsecentry##1##2##3##4{%
-        \dopdfoutline{##1}{4}{##3}{##4}}%
-      %
-      \let\appentry\numchapentry%
-      \let\appsecentry\numsecentry%
-      \let\appsubsecentry\numsubsecentry%
-      \let\appsubsubsecentry\numsubsubsecentry%
-      \let\unnchapentry\numchapentry%
-      \let\unnsecentry\numsecentry%
-      \let\unnsubsecentry\numsubsecentry%
-      \let\unnsubsubsecentry\numsubsubsecentry%
-      %
-      % For XeTeX, xdvipdfmx converts strings to UTF-16.
-      % Therefore, the encoding and the language may not be considered.
-      %
-      \indexnofonts
-      \setupdatafile
-      % We can have normal brace characters in the PDF outlines, unlike
-      % Texinfo index files.  So set that up.
-      \def\{{\lbracecharliteral}%
-      \def\}{\rbracecharliteral}%
-      \catcode`\\=\active \otherbackslash
-      \input \tocreadfilename
-    \endgroup
-  }
-  {\catcode`[=1 \catcode`]=2
-   \catcode`{=\other \catcode`}=\other
-   \gdef\lbracecharliteral[{]%
-   \gdef\rbracecharliteral[}]%
-  ]
-
-  \special{pdf:docview << /PageMode /UseOutlines >> }
-  % ``\special{pdf:tounicode ...}'' is not necessary
-  % because xdvipdfmx converts strings from UTF-8 to UTF-16 without it.
-  % However, due to a UTF-16 conversion issue of xdvipdfmx 20150315,
-  % ``\special{pdf:dest ...}'' cannot handle non-ASCII strings.
-  % It is fixed by xdvipdfmx 20160106 (TeX Live SVN r39753).
-%
-  \def\skipspaces#1{\def\PP{#1}\def\D{|}%
-    \ifx\PP\D\let\nextsp\relax
-    \else\let\nextsp\skipspaces
-      \addtokens{\filename}{\PP}%
-      \advance\filenamelength by 1
-    \fi
-    \nextsp}
-  \def\getfilename#1{%
-    \filenamelength=0
-    % If we don't expand the argument now, \skipspaces will get
-    % snagged on things like "@value{foo}".
-    \edef\temp{#1}%
-    \expandafter\skipspaces\temp|\relax
-  }
-  % make a live url in pdf output.
-  \def\pdfurl#1{%
-    \begingroup
-      % it seems we really need yet another set of dummies; have not
-      % tried to figure out what each command should do in the context
-      % of @url.  for now, just make @/ a no-op, that's the only one
-      % people have actually reported a problem with.
-      %
-      \normalturnoffactive
-      \def\@{@}%
-      \let\/=\empty
-      \makevalueexpandable
-      % do we want to go so far as to use \indexnofonts instead of just
-      % special-casing \var here?
-      \def\var##1{##1}%
-      %
-      \leavevmode\setcolor{\urlcolor}%
-      \special{pdf:bann << /Border [0 0 0]
-        /Subtype /Link /A << /S /URI /URI (#1) >> >>}%
-    \endgroup}
-  \def\endlink{\setcolor{\maincolor}\special{pdf:eann}}
-  \def\pdfgettoks#1.{\setbox\boxA=\hbox{\toksA={#1.}\toksB={}\maketoks}}
-  \def\addtokens#1#2{\edef\addtoks{\noexpand#1={\the#1#2}}\addtoks}
-  \def\adn#1{\addtokens{\toksC}{#1}\global\countA=1\let\next=\maketoks}
-  \def\poptoks#1#2|ENDTOKS|{\let\first=#1\toksD={#1}\toksA={#2}}
-  \def\maketoks{%
-    \expandafter\poptoks\the\toksA|ENDTOKS|\relax
-    \ifx\first0\adn0
-    \else\ifx\first1\adn1 \else\ifx\first2\adn2 \else\ifx\first3\adn3
-    \else\ifx\first4\adn4 \else\ifx\first5\adn5 \else\ifx\first6\adn6
-    \else\ifx\first7\adn7 \else\ifx\first8\adn8 \else\ifx\first9\adn9
-    \else
-      \ifnum0=\countA\else\makelink\fi
-      \ifx\first.\let\next=\done\else
-        \let\next=\maketoks
-        \addtokens{\toksB}{\the\toksD}
-        \ifx\first,\addtokens{\toksB}{\space}\fi
-      \fi
-    \fi\fi\fi\fi\fi\fi\fi\fi\fi\fi
-    \next}
-  \def\makelink{\addtokens{\toksB}%
-    {\noexpand\pdflink{\the\toksC}}\toksC={}\global\countA=0}
-  \def\pdflink#1{%
-    \special{pdf:bann << /Border [0 0 0]
-      /Type /Annot /Subtype /Link /A << /S /GoTo /D (#1) >> >>}%
-    \setcolor{\linkcolor}#1\endlink}
-  \def\done{\edef\st{\global\noexpand\toksA={\the\toksB}}\st}
-%
-  %
-  % @image support
-  %
-  % #1 is image name, #2 width (might be empty/whitespace), #3 height (ditto).
-  \def\doxeteximage#1#2#3{%
-    \def\xeteximagewidth{#2}\setbox0 = \hbox{\ignorespaces #2}%
-    \def\xeteximageheight{#3}\setbox2 = \hbox{\ignorespaces #3}%
-    %
-    % XeTeX (and the PDF format) supports .pdf, .png, .jpg (among
-    % others).  Let's try in that order, PDF first since if
-    % someone has a scalable image, presumably better to use that than a
-    % bitmap.
-    \let\xeteximgext=\empty
-    \begingroup
-      \openin 1 #1.pdf \ifeof 1
-        \openin 1 #1.PDF \ifeof 1
-          \openin 1 #1.png \ifeof 1
-            \openin 1 #1.jpg \ifeof 1
-              \openin 1 #1.jpeg \ifeof 1
-                \openin 1 #1.JPG \ifeof 1
-                  \errmessage{Could not find image file #1 for XeTeX}%
-                \else \gdef\xeteximgext{JPG}%
-                \fi
-              \else \gdef\xeteximgext{jpeg}%
-              \fi
-            \else \gdef\xeteximgext{jpg}%
-            \fi
-          \else \gdef\xeteximgext{png}%
-          \fi
-        \else \gdef\xeteximgext{PDF}%
-        \fi
-      \else \gdef\xeteximgext{pdf}%
-      \fi
-      \closein 1
-    \endgroup
-    %
-    \def\xetexpdfext{pdf}%
-    \ifx\xeteximgext\xetexpdfext
-      \XeTeXpdffile "#1".\xeteximgext ""
-    \else
-      \def\xetexpdfext{PDF}%
-      \ifx\xeteximgext\xetexpdfext
-        \XeTeXpdffile "#1".\xeteximgext ""
-      \else
-        \XeTeXpicfile "#1".\xeteximgext ""
-      \fi
-    \fi
-    \ifdim \wd0 >0pt width \xeteximagewidth \fi
-    \ifdim \wd2 >0pt height \xeteximageheight \fi \relax
-  }
-\fi
-
-
-%
-\message{fonts,}
-
-% Set the baselineskip to #1, and the lineskip and strut size
-% correspondingly.  There is no deep meaning behind these magic numbers
-% used as factors; they just match (closely enough) what Knuth defined.
-%
-\def\lineskipfactor{.08333}
-\def\strutheightpercent{.70833}
-\def\strutdepthpercent {.29167}
-%
-% can get a sort of poor man's double spacing by redefining this.
-\def\baselinefactor{1}
-%
-\newdimen\textleading
-\def\setleading#1{%
-  \dimen0 = #1\relax
-  \normalbaselineskip = \baselinefactor\dimen0
-  \normallineskip = \lineskipfactor\normalbaselineskip
-  \normalbaselines
-  \setbox\strutbox =\hbox{%
-    \vrule width0pt height\strutheightpercent\baselineskip
-                    depth \strutdepthpercent \baselineskip
-  }%
-}
-
-% PDF CMaps.  See also LaTeX's t1.cmap.
-%
-% do nothing with this by default.
-\expandafter\let\csname cmapOT1\endcsname\gobble
-\expandafter\let\csname cmapOT1IT\endcsname\gobble
-\expandafter\let\csname cmapOT1TT\endcsname\gobble
-
-% if we are producing pdf, and we have \pdffontattr, then define cmaps.
-% (\pdffontattr was introduced many years ago, but people still run
-% older pdftex's; it's easy to conditionalize, so we do.)
-\ifpdf \ifx\pdffontattr\thisisundefined \else
-  \begingroup
-    \catcode`\^^M=\active \def^^M{^^J}% Output line endings as the ^^J char.
-    \catcode`\%=12 \immediate\pdfobj stream {%!PS-Adobe-3.0 Resource-CMap
-%%DocumentNeededResources: ProcSet (CIDInit)
-%%IncludeResource: ProcSet (CIDInit)
-%%BeginResource: CMap (TeX-OT1-0)
-%%Title: (TeX-OT1-0 TeX OT1 0)
-%%Version: 1.000
-%%EndComments
-/CIDInit /ProcSet findresource begin
-12 dict begin
-begincmap
-/CIDSystemInfo
-<< /Registry (TeX)
-/Ordering (OT1)
-/Supplement 0
->> def
-/CMapName /TeX-OT1-0 def
-/CMapType 2 def
-1 begincodespacerange
-<00> <7F>
-endcodespacerange
-8 beginbfrange
-<00> <01> <0393>
-<09> <0A> <03A8>
-<23> <26> <0023>
-<28> <3B> <0028>
-<3F> <5B> <003F>
-<5D> <5E> <005D>
-<61> <7A> <0061>
-<7B> <7C> <2013>
-endbfrange
-40 beginbfchar
-<02> <0398>
-<03> <039B>
-<04> <039E>
-<05> <03A0>
-<06> <03A3>
-<07> <03D2>
-<08> <03A6>
-<0B> <00660066>
-<0C> <00660069>
-<0D> <0066006C>
-<0E> <006600660069>
-<0F> <00660066006C>
-<10> <0131>
-<11> <0237>
-<12> <0060>
-<13> <00B4>
-<14> <02C7>
-<15> <02D8>
-<16> <00AF>
-<17> <02DA>
-<18> <00B8>
-<19> <00DF>
-<1A> <00E6>
-<1B> <0153>
-<1C> <00F8>
-<1D> <00C6>
-<1E> <0152>
-<1F> <00D8>
-<21> <0021>
-<22> <201D>
-<27> <2019>
-<3C> <00A1>
-<3D> <003D>
-<3E> <00BF>
-<5C> <201C>
-<5F> <02D9>
-<60> <2018>
-<7D> <02DD>
-<7E> <007E>
-<7F> <00A8>
-endbfchar
-endcmap
-CMapName currentdict /CMap defineresource pop
-end
-end
-%%EndResource
-%%EOF
-    }\endgroup
-  \expandafter\edef\csname cmapOT1\endcsname#1{%
-    \pdffontattr#1{/ToUnicode \the\pdflastobj\space 0 R}%
-  }%
-%
-% \cmapOT1IT
-  \begingroup
-    \catcode`\^^M=\active \def^^M{^^J}% Output line endings as the ^^J char.
-    \catcode`\%=12 \immediate\pdfobj stream {%!PS-Adobe-3.0 Resource-CMap
-%%DocumentNeededResources: ProcSet (CIDInit)
-%%IncludeResource: ProcSet (CIDInit)
-%%BeginResource: CMap (TeX-OT1IT-0)
-%%Title: (TeX-OT1IT-0 TeX OT1IT 0)
-%%Version: 1.000
-%%EndComments
-/CIDInit /ProcSet findresource begin
-12 dict begin
-begincmap
-/CIDSystemInfo
-<< /Registry (TeX)
-/Ordering (OT1IT)
-/Supplement 0
->> def
-/CMapName /TeX-OT1IT-0 def
-/CMapType 2 def
-1 begincodespacerange
-<00> <7F>
-endcodespacerange
-8 beginbfrange
-<00> <01> <0393>
-<09> <0A> <03A8>
-<25> <26> <0025>
-<28> <3B> <0028>
-<3F> <5B> <003F>
-<5D> <5E> <005D>
-<61> <7A> <0061>
-<7B> <7C> <2013>
-endbfrange
-42 beginbfchar
-<02> <0398>
-<03> <039B>
-<04> <039E>
-<05> <03A0>
-<06> <03A3>
-<07> <03D2>
-<08> <03A6>
-<0B> <00660066>
-<0C> <00660069>
-<0D> <0066006C>
-<0E> <006600660069>
-<0F> <00660066006C>
-<10> <0131>
-<11> <0237>
-<12> <0060>
-<13> <00B4>
-<14> <02C7>
-<15> <02D8>
-<16> <00AF>
-<17> <02DA>
-<18> <00B8>
-<19> <00DF>
-<1A> <00E6>
-<1B> <0153>
-<1C> <00F8>
-<1D> <00C6>
-<1E> <0152>
-<1F> <00D8>
-<21> <0021>
-<22> <201D>
-<23> <0023>
-<24> <00A3>
-<27> <2019>
-<3C> <00A1>
-<3D> <003D>
-<3E> <00BF>
-<5C> <201C>
-<5F> <02D9>
-<60> <2018>
-<7D> <02DD>
-<7E> <007E>
-<7F> <00A8>
-endbfchar
-endcmap
-CMapName currentdict /CMap defineresource pop
-end
-end
-%%EndResource
-%%EOF
-    }\endgroup
-  \expandafter\edef\csname cmapOT1IT\endcsname#1{%
-    \pdffontattr#1{/ToUnicode \the\pdflastobj\space 0 R}%
-  }%
-%
-% \cmapOT1TT
-  \begingroup
-    \catcode`\^^M=\active \def^^M{^^J}% Output line endings as the ^^J char.
-    \catcode`\%=12 \immediate\pdfobj stream {%!PS-Adobe-3.0 Resource-CMap
-%%DocumentNeededResources: ProcSet (CIDInit)
-%%IncludeResource: ProcSet (CIDInit)
-%%BeginResource: CMap (TeX-OT1TT-0)
-%%Title: (TeX-OT1TT-0 TeX OT1TT 0)
-%%Version: 1.000
-%%EndComments
-/CIDInit /ProcSet findresource begin
-12 dict begin
-begincmap
-/CIDSystemInfo
-<< /Registry (TeX)
-/Ordering (OT1TT)
-/Supplement 0
->> def
-/CMapName /TeX-OT1TT-0 def
-/CMapType 2 def
-1 begincodespacerange
-<00> <7F>
-endcodespacerange
-5 beginbfrange
-<00> <01> <0393>
-<09> <0A> <03A8>
-<21> <26> <0021>
-<28> <5F> <0028>
-<61> <7E> <0061>
-endbfrange
-32 beginbfchar
-<02> <0398>
-<03> <039B>
-<04> <039E>
-<05> <03A0>
-<06> <03A3>
-<07> <03D2>
-<08> <03A6>
-<0B> <2191>
-<0C> <2193>
-<0D> <0027>
-<0E> <00A1>
-<0F> <00BF>
-<10> <0131>
-<11> <0237>
-<12> <0060>
-<13> <00B4>
-<14> <02C7>
-<15> <02D8>
-<16> <00AF>
-<17> <02DA>
-<18> <00B8>
-<19> <00DF>
-<1A> <00E6>
-<1B> <0153>
-<1C> <00F8>
-<1D> <00C6>
-<1E> <0152>
-<1F> <00D8>
-<20> <2423>
-<27> <2019>
-<60> <2018>
-<7F> <00A8>
-endbfchar
-endcmap
-CMapName currentdict /CMap defineresource pop
-end
-end
-%%EndResource
-%%EOF
-    }\endgroup
-  \expandafter\edef\csname cmapOT1TT\endcsname#1{%
-    \pdffontattr#1{/ToUnicode \the\pdflastobj\space 0 R}%
-  }%
-\fi\fi
-
-
-% Set the font macro #1 to the font named \fontprefix#2.
-% #3 is the font's design size, #4 is a scale factor, #5 is the CMap
-% encoding (only OT1, OT1IT and OT1TT are allowed, or empty to omit).
-% Example:
-% #1 = \textrm
-% #2 = \rmshape
-% #3 = 10
-% #4 = \mainmagstep
-% #5 = OT1
-%
-\def\setfont#1#2#3#4#5{%
-  \font#1=\fontprefix#2#3 scaled #4
-  \csname cmap#5\endcsname#1%
-}
-% This is what gets called when #5 of \setfont is empty.
-\let\cmap\gobble
-%
-% (end of cmaps)
-
-% Use cm as the default font prefix.
-% To specify the font prefix, you must define \fontprefix
-% before you read in texinfo.tex.
-\ifx\fontprefix\thisisundefined
-\def\fontprefix{cm}
-\fi
-% Support font families that don't use the same naming scheme as CM.
-\def\rmshape{r}
-\def\rmbshape{bx}               % where the normal face is bold
-\def\bfshape{b}
-\def\bxshape{bx}
-\def\ttshape{tt}
-\def\ttbshape{tt}
-\def\ttslshape{sltt}
-\def\itshape{ti}
-\def\itbshape{bxti}
-\def\slshape{sl}
-\def\slbshape{bxsl}
-\def\sfshape{ss}
-\def\sfbshape{ss}
-\def\scshape{csc}
-\def\scbshape{csc}
-
-% Definitions for a main text size of 11pt.  (The default in Texinfo.)
-%
-\def\definetextfontsizexi{%
-% Text fonts (11.2pt, magstep1).
-\def\textnominalsize{11pt}
-\edef\mainmagstep{\magstephalf}
-\setfont\textrm\rmshape{10}{\mainmagstep}{OT1}
-\setfont\texttt\ttshape{10}{\mainmagstep}{OT1TT}
-\setfont\textbf\bfshape{10}{\mainmagstep}{OT1}
-\setfont\textit\itshape{10}{\mainmagstep}{OT1IT}
-\setfont\textsl\slshape{10}{\mainmagstep}{OT1}
-\setfont\textsf\sfshape{10}{\mainmagstep}{OT1}
-\setfont\textsc\scshape{10}{\mainmagstep}{OT1}
-\setfont\textttsl\ttslshape{10}{\mainmagstep}{OT1TT}
-\font\texti=cmmi10 scaled \mainmagstep
-\font\textsy=cmsy10 scaled \mainmagstep
-\def\textecsize{1095}
-
-% A few fonts for @defun names and args.
-\setfont\defbf\bfshape{10}{\magstep1}{OT1}
-\setfont\deftt\ttshape{10}{\magstep1}{OT1TT}
-\setfont\defsl\slshape{10}{\magstep1}{OT1}
-\setfont\defttsl\ttslshape{10}{\magstep1}{OT1TT}
-\def\df{\let\ttfont=\deftt \let\bffont = \defbf
-\let\ttslfont=\defttsl \let\slfont=\defsl \bf}
-
-% Fonts for indices, footnotes, small examples (9pt).
-\def\smallnominalsize{9pt}
-\setfont\smallrm\rmshape{9}{1000}{OT1}
-\setfont\smalltt\ttshape{9}{1000}{OT1TT}
-\setfont\smallbf\bfshape{10}{900}{OT1}
-\setfont\smallit\itshape{9}{1000}{OT1IT}
-\setfont\smallsl\slshape{9}{1000}{OT1}
-\setfont\smallsf\sfshape{9}{1000}{OT1}
-\setfont\smallsc\scshape{10}{900}{OT1}
-\setfont\smallttsl\ttslshape{10}{900}{OT1TT}
-\font\smalli=cmmi9
-\font\smallsy=cmsy9
-\def\smallecsize{0900}
-
-% Fonts for small examples (8pt).
-\def\smallernominalsize{8pt}
-\setfont\smallerrm\rmshape{8}{1000}{OT1}
-\setfont\smallertt\ttshape{8}{1000}{OT1TT}
-\setfont\smallerbf\bfshape{10}{800}{OT1}
-\setfont\smallerit\itshape{8}{1000}{OT1IT}
-\setfont\smallersl\slshape{8}{1000}{OT1}
-\setfont\smallersf\sfshape{8}{1000}{OT1}
-\setfont\smallersc\scshape{10}{800}{OT1}
-\setfont\smallerttsl\ttslshape{10}{800}{OT1TT}
-\font\smalleri=cmmi8
-\font\smallersy=cmsy8
-\def\smallerecsize{0800}
-
-% Fonts for math mode superscripts (7pt).
-\def\sevennominalsize{7pt}
-\setfont\sevenrm\rmshape{7}{1000}{OT1}
-\setfont\seventt\ttshape{10}{700}{OT1TT}
-\setfont\sevenbf\bfshape{10}{700}{OT1}
-\setfont\sevenit\itshape{7}{1000}{OT1IT}
-\setfont\sevensl\slshape{10}{700}{OT1}
-\setfont\sevensf\sfshape{10}{700}{OT1}
-\setfont\sevensc\scshape{10}{700}{OT1}
-\setfont\seventtsl\ttslshape{10}{700}{OT1TT}
-\font\seveni=cmmi7
-\font\sevensy=cmsy7
-\def\sevenecsize{0700}
-
-% Fonts for title page (20.4pt):
-\def\titlenominalsize{20pt}
-\setfont\titlerm\rmbshape{12}{\magstep3}{OT1}
-\setfont\titleit\itbshape{10}{\magstep4}{OT1IT}
-\setfont\titlesl\slbshape{10}{\magstep4}{OT1}
-\setfont\titlett\ttbshape{12}{\magstep3}{OT1TT}
-\setfont\titlettsl\ttslshape{10}{\magstep4}{OT1TT}
-\setfont\titlesf\sfbshape{17}{\magstep1}{OT1}
-\let\titlebf=\titlerm
-\setfont\titlesc\scbshape{10}{\magstep4}{OT1}
-\font\titlei=cmmi12 scaled \magstep3
-\font\titlesy=cmsy10 scaled \magstep4
-\def\titleecsize{2074}
-
-% Chapter (and unnumbered) fonts (17.28pt).
-\def\chapnominalsize{17pt}
-\setfont\chaprm\rmbshape{12}{\magstep2}{OT1}
-\setfont\chapit\itbshape{10}{\magstep3}{OT1IT}
-\setfont\chapsl\slbshape{10}{\magstep3}{OT1}
-\setfont\chaptt\ttbshape{12}{\magstep2}{OT1TT}
-\setfont\chapttsl\ttslshape{10}{\magstep3}{OT1TT}
-\setfont\chapsf\sfbshape{17}{1000}{OT1}
-\let\chapbf=\chaprm
-\setfont\chapsc\scbshape{10}{\magstep3}{OT1}
-\font\chapi=cmmi12 scaled \magstep2
-\font\chapsy=cmsy10 scaled \magstep3
-\def\chapecsize{1728}
-
-% Section fonts (14.4pt).
-\def\secnominalsize{14pt}
-\setfont\secrm\rmbshape{12}{\magstep1}{OT1}
-\setfont\secrmnotbold\rmshape{12}{\magstep1}{OT1}
-\setfont\secit\itbshape{10}{\magstep2}{OT1IT}
-\setfont\secsl\slbshape{10}{\magstep2}{OT1}
-\setfont\sectt\ttbshape{12}{\magstep1}{OT1TT}
-\setfont\secttsl\ttslshape{10}{\magstep2}{OT1TT}
-\setfont\secsf\sfbshape{12}{\magstep1}{OT1}
-\let\secbf\secrm
-\setfont\secsc\scbshape{10}{\magstep2}{OT1}
-\font\seci=cmmi12 scaled \magstep1
-\font\secsy=cmsy10 scaled \magstep2
-\def\sececsize{1440}
-
-% Subsection fonts (13.15pt).
-\def\ssecnominalsize{13pt}
-\setfont\ssecrm\rmbshape{12}{\magstephalf}{OT1}
-\setfont\ssecit\itbshape{10}{1315}{OT1IT}
-\setfont\ssecsl\slbshape{10}{1315}{OT1}
-\setfont\ssectt\ttbshape{12}{\magstephalf}{OT1TT}
-\setfont\ssecttsl\ttslshape{10}{1315}{OT1TT}
-\setfont\ssecsf\sfbshape{12}{\magstephalf}{OT1}
-\let\ssecbf\ssecrm
-\setfont\ssecsc\scbshape{10}{1315}{OT1}
-\font\sseci=cmmi12 scaled \magstephalf
-\font\ssecsy=cmsy10 scaled 1315
-\def\ssececsize{1200}
-
-% Reduced fonts for @acronym in text (10pt).
-\def\reducednominalsize{10pt}
-\setfont\reducedrm\rmshape{10}{1000}{OT1}
-\setfont\reducedtt\ttshape{10}{1000}{OT1TT}
-\setfont\reducedbf\bfshape{10}{1000}{OT1}
-\setfont\reducedit\itshape{10}{1000}{OT1IT}
-\setfont\reducedsl\slshape{10}{1000}{OT1}
-\setfont\reducedsf\sfshape{10}{1000}{OT1}
-\setfont\reducedsc\scshape{10}{1000}{OT1}
-\setfont\reducedttsl\ttslshape{10}{1000}{OT1TT}
-\font\reducedi=cmmi10
-\font\reducedsy=cmsy10
-\def\reducedecsize{1000}
-
-\textleading = 13.2pt % line spacing for 11pt CM
-\textfonts            % reset the current fonts
-\rm
-} % end of 11pt text font size definitions, \definetextfontsizexi
-
-
-% Definitions to make the main text be 10pt Computer Modern, with
-% section, chapter, etc., sizes following suit.  This is for the GNU
-% Press printing of the Emacs 22 manual.  Maybe other manuals in the
-% future.  Used with @smallbook, which sets the leading to 12pt.
-%
-\def\definetextfontsizex{%
-% Text fonts (10pt).
-\def\textnominalsize{10pt}
-\edef\mainmagstep{1000}
-\setfont\textrm\rmshape{10}{\mainmagstep}{OT1}
-\setfont\texttt\ttshape{10}{\mainmagstep}{OT1TT}
-\setfont\textbf\bfshape{10}{\mainmagstep}{OT1}
-\setfont\textit\itshape{10}{\mainmagstep}{OT1IT}
-\setfont\textsl\slshape{10}{\mainmagstep}{OT1}
-\setfont\textsf\sfshape{10}{\mainmagstep}{OT1}
-\setfont\textsc\scshape{10}{\mainmagstep}{OT1}
-\setfont\textttsl\ttslshape{10}{\mainmagstep}{OT1TT}
-\font\texti=cmmi10 scaled \mainmagstep
-\font\textsy=cmsy10 scaled \mainmagstep
-\def\textecsize{1000}
-
-% A few fonts for @defun names and args.
-\setfont\defbf\bfshape{10}{\magstephalf}{OT1}
-\setfont\deftt\ttshape{10}{\magstephalf}{OT1TT}
-\setfont\defsl\slshape{10}{\magstephalf}{OT1}
-\setfont\defttsl\ttslshape{10}{\magstephalf}{OT1TT}
-\def\df{\let\ttfont=\deftt \let\bffont = \defbf
-\let\slfont=\defsl \let\ttslfont=\defttsl \bf}
-
-% Fonts for indices, footnotes, small examples (9pt).
-\def\smallnominalsize{9pt}
-\setfont\smallrm\rmshape{9}{1000}{OT1}
-\setfont\smalltt\ttshape{9}{1000}{OT1TT}
-\setfont\smallbf\bfshape{10}{900}{OT1}
-\setfont\smallit\itshape{9}{1000}{OT1IT}
-\setfont\smallsl\slshape{9}{1000}{OT1}
-\setfont\smallsf\sfshape{9}{1000}{OT1}
-\setfont\smallsc\scshape{10}{900}{OT1}
-\setfont\smallttsl\ttslshape{10}{900}{OT1TT}
-\font\smalli=cmmi9
-\font\smallsy=cmsy9
-\def\smallecsize{0900}
-
-% Fonts for small examples (8pt).
-\def\smallernominalsize{8pt}
-\setfont\smallerrm\rmshape{8}{1000}{OT1}
-\setfont\smallertt\ttshape{8}{1000}{OT1TT}
-\setfont\smallerbf\bfshape{10}{800}{OT1}
-\setfont\smallerit\itshape{8}{1000}{OT1IT}
-\setfont\smallersl\slshape{8}{1000}{OT1}
-\setfont\smallersf\sfshape{8}{1000}{OT1}
-\setfont\smallersc\scshape{10}{800}{OT1}
-\setfont\smallerttsl\ttslshape{10}{800}{OT1TT}
-\font\smalleri=cmmi8
-\font\smallersy=cmsy8
-\def\smallerecsize{0800}
-
-% Fonts for math mode superscripts (7pt).
-\def\sevennominalsize{7pt}
-\setfont\sevenrm\rmshape{7}{1000}{OT1}
-\setfont\seventt\ttshape{10}{700}{OT1TT}
-\setfont\sevenbf\bfshape{10}{700}{OT1}
-\setfont\sevenit\itshape{7}{1000}{OT1IT}
-\setfont\sevensl\slshape{10}{700}{OT1}
-\setfont\sevensf\sfshape{10}{700}{OT1}
-\setfont\sevensc\scshape{10}{700}{OT1}
-\setfont\seventtsl\ttslshape{10}{700}{OT1TT}
-\font\seveni=cmmi7
-\font\sevensy=cmsy7
-\def\sevenecsize{0700}
-
-% Fonts for title page (20.4pt):
-\def\titlenominalsize{20pt}
-\setfont\titlerm\rmbshape{12}{\magstep3}{OT1}
-\setfont\titleit\itbshape{10}{\magstep4}{OT1IT}
-\setfont\titlesl\slbshape{10}{\magstep4}{OT1}
-\setfont\titlett\ttbshape{12}{\magstep3}{OT1TT}
-\setfont\titlettsl\ttslshape{10}{\magstep4}{OT1TT}
-\setfont\titlesf\sfbshape{17}{\magstep1}{OT1}
-\let\titlebf=\titlerm
-\setfont\titlesc\scbshape{10}{\magstep4}{OT1}
-\font\titlei=cmmi12 scaled \magstep3
-\font\titlesy=cmsy10 scaled \magstep4
-\def\titleecsize{2074}
-
-% Chapter fonts (14.4pt).
-\def\chapnominalsize{14pt}
-\setfont\chaprm\rmbshape{12}{\magstep1}{OT1}
-\setfont\chapit\itbshape{10}{\magstep2}{OT1IT}
-\setfont\chapsl\slbshape{10}{\magstep2}{OT1}
-\setfont\chaptt\ttbshape{12}{\magstep1}{OT1TT}
-\setfont\chapttsl\ttslshape{10}{\magstep2}{OT1TT}
-\setfont\chapsf\sfbshape{12}{\magstep1}{OT1}
-\let\chapbf\chaprm
-\setfont\chapsc\scbshape{10}{\magstep2}{OT1}
-\font\chapi=cmmi12 scaled \magstep1
-\font\chapsy=cmsy10 scaled \magstep2
-\def\chapecsize{1440}
-
-% Section fonts (12pt).
-\def\secnominalsize{12pt}
-\setfont\secrm\rmbshape{12}{1000}{OT1}
-\setfont\secit\itbshape{10}{\magstep1}{OT1IT}
-\setfont\secsl\slbshape{10}{\magstep1}{OT1}
-\setfont\sectt\ttbshape{12}{1000}{OT1TT}
-\setfont\secttsl\ttslshape{10}{\magstep1}{OT1TT}
-\setfont\secsf\sfbshape{12}{1000}{OT1}
-\let\secbf\secrm
-\setfont\secsc\scbshape{10}{\magstep1}{OT1}
-\font\seci=cmmi12
-\font\secsy=cmsy10 scaled \magstep1
-\def\sececsize{1200}
-
-% Subsection fonts (10pt).
-\def\ssecnominalsize{10pt}
-\setfont\ssecrm\rmbshape{10}{1000}{OT1}
-\setfont\ssecit\itbshape{10}{1000}{OT1IT}
-\setfont\ssecsl\slbshape{10}{1000}{OT1}
-\setfont\ssectt\ttbshape{10}{1000}{OT1TT}
-\setfont\ssecttsl\ttslshape{10}{1000}{OT1TT}
-\setfont\ssecsf\sfbshape{10}{1000}{OT1}
-\let\ssecbf\ssecrm
-\setfont\ssecsc\scbshape{10}{1000}{OT1}
-\font\sseci=cmmi10
-\font\ssecsy=cmsy10
-\def\ssececsize{1000}
-
-% Reduced fonts for @acronym in text (9pt).
-\def\reducednominalsize{9pt}
-\setfont\reducedrm\rmshape{9}{1000}{OT1}
-\setfont\reducedtt\ttshape{9}{1000}{OT1TT}
-\setfont\reducedbf\bfshape{10}{900}{OT1}
-\setfont\reducedit\itshape{9}{1000}{OT1IT}
-\setfont\reducedsl\slshape{9}{1000}{OT1}
-\setfont\reducedsf\sfshape{9}{1000}{OT1}
-\setfont\reducedsc\scshape{10}{900}{OT1}
-\setfont\reducedttsl\ttslshape{10}{900}{OT1TT}
-\font\reducedi=cmmi9
-\font\reducedsy=cmsy9
-\def\reducedecsize{0900}
-
-\divide\parskip by 2  % reduce space between paragraphs
-\textleading = 12pt   % line spacing for 10pt CM
-\textfonts            % reset the current fonts
-\rm
-} % end of 10pt text font size definitions, \definetextfontsizex
-
-% Fonts for short table of contents.
-\setfont\shortcontrm\rmshape{12}{1000}{OT1}
-\setfont\shortcontbf\bfshape{10}{\magstep1}{OT1}  % no cmb12
-\setfont\shortcontsl\slshape{12}{1000}{OT1}
-\setfont\shortconttt\ttshape{12}{1000}{OT1TT}
-
-
-% We provide the user-level command
-%   @fonttextsize 10
-% (or 11) to redefine the text font size.  pt is assumed.
-%
-\def\xiword{11}
-\def\xword{10}
-\def\xwordpt{10pt}
-%
-\parseargdef\fonttextsize{%
-  \def\textsizearg{#1}%
-  %\wlog{doing @fonttextsize \textsizearg}%
-  %
-  % Set \globaldefs so that documents can use this inside @tex, since
-  % makeinfo 4.8 does not support it, but we need it nonetheless.
-  %
- \begingroup \globaldefs=1
-  \ifx\textsizearg\xword \definetextfontsizex
-  \else \ifx\textsizearg\xiword \definetextfontsizexi
-  \else
-    \errhelp=\EMsimple
-    \errmessage{@fonttextsize only supports `10' or `11', not `\textsizearg'}
-  \fi\fi
- \endgroup
-}
-
-%
-% Change the current font style to #1, remembering it in \curfontstyle.
-% For now, we do not accumulate font styles: @b{@i{foo}} prints foo in
-% italics, not bold italics.
-%
-\def\setfontstyle#1{%
-  \def\curfontstyle{#1}% not as a control sequence, because we are \edef'd.
-  \csname #1font\endcsname  % change the current font
-}
-
-\def\rm{\fam=0 \setfontstyle{rm}}
-\def\it{\fam=\itfam \setfontstyle{it}}
-\def\sl{\fam=\slfam \setfontstyle{sl}}
-\def\bf{\fam=\bffam \setfontstyle{bf}}\def\bfstylename{bf}
-\def\tt{\fam=\ttfam \setfontstyle{tt}}
-
-% Texinfo sort of supports the sans serif font style, which plain TeX does not.
-% So we set up a \sf.
-\newfam\sffam
-\def\sf{\fam=\sffam \setfontstyle{sf}}
-
-% We don't need math for this font style.
-\def\ttsl{\setfontstyle{ttsl}}
-
-
-% In order for the font changes to affect most math symbols and letters,
-% we have to define the \textfont of the standard families.
-% We don't bother to reset \scriptscriptfont; awaiting user need.
-%
-\def\resetmathfonts{%
-  \textfont0=\rmfont \textfont1=\ifont \textfont2=\syfont
-  \textfont\itfam=\itfont \textfont\slfam=\slfont \textfont\bffam=\bffont
-  \textfont\ttfam=\ttfont \textfont\sffam=\sffont
-  %
-  % Fonts for superscript.  Note that the 7pt fonts are used regardless
-  % of the current font size.
-  \scriptfont0=\sevenrm \scriptfont1=\seveni \scriptfont2=\sevensy
-  \scriptfont\itfam=\sevenit \scriptfont\slfam=\sevensl
-  \scriptfont\bffam=\sevenbf \scriptfont\ttfam=\seventt
-  \scriptfont\sffam=\sevensf
-}
-
-%
-
-% The font-changing commands (all called \...fonts) redefine the meanings
-% of \STYLEfont, instead of just \STYLE.  We do this because \STYLE needs
-% to also set the current \fam for math mode.  Our \STYLE (e.g., \rm)
-% commands hardwire \STYLEfont to set the current font.
-%
-% The fonts used for \ifont are for "math italics"  (\itfont is for italics
-% in regular text).  \syfont is also used in math mode only.
-%
-% Each font-changing command also sets the names \lsize (one size lower)
-% and \lllsize (three sizes lower).  These relative commands are used
-% in, e.g., the LaTeX logo and acronyms.
-%
-% This all needs generalizing, badly.
-%
-
-\def\assignfonts#1{%
-  \expandafter\let\expandafter\rmfont\csname #1rm\endcsname
-  \expandafter\let\expandafter\itfont\csname #1it\endcsname
-  \expandafter\let\expandafter\slfont\csname #1sl\endcsname
-  \expandafter\let\expandafter\bffont\csname #1bf\endcsname
-  \expandafter\let\expandafter\ttfont\csname #1tt\endcsname
-  \expandafter\let\expandafter\smallcaps\csname #1sc\endcsname
-  \expandafter\let\expandafter\sffont  \csname #1sf\endcsname
-  \expandafter\let\expandafter\ifont   \csname #1i\endcsname
-  \expandafter\let\expandafter\syfont  \csname #1sy\endcsname
-  \expandafter\let\expandafter\ttslfont\csname #1ttsl\endcsname
-}
-
-\newif\ifrmisbold
-
-% Select smaller font size with the current style.  Used to change font size
-% in, e.g., the LaTeX logo and acronyms.  If we are using bold fonts for
-% normal roman text, also use bold fonts for roman text in the smaller size.
-\def\switchtolllsize{%
-   \expandafter\assignfonts\expandafter{\lllsize}%
-   \ifrmisbold
-     \let\rmfont\bffont
-   \fi
-   \csname\curfontstyle\endcsname
-}%
-
-\def\switchtolsize{%
-   \expandafter\assignfonts\expandafter{\lsize}%
-   \ifrmisbold
-     \let\rmfont\bffont
-   \fi
-   \csname\curfontstyle\endcsname
-}%
-
-\def\definefontsetatsize#1#2#3#4#5{%
-\expandafter\def\csname #1fonts\endcsname{%
-  \def\curfontsize{#1}%
-  \def\lsize{#2}\def\lllsize{#3}%
-  \csname rmisbold#5\endcsname
-  \assignfonts{#1}%
-  \resetmathfonts
-  \setleading{#4}%
-}}
-
-\definefontsetatsize{text}   {reduced}{smaller}{\textleading}{false}
-\definefontsetatsize{title}  {chap}   {subsec} {27pt}  {true}
-\definefontsetatsize{chap}   {sec}    {text}   {19pt}  {true}
-\definefontsetatsize{sec}    {subsec} {reduced}{17pt}  {true}
-\definefontsetatsize{ssec}   {text}   {small}  {15pt}  {true}
-\definefontsetatsize{reduced}{small}  {smaller}{10.5pt}{false}
-\definefontsetatsize{small}  {smaller}{smaller}{10.5pt}{false}
-\definefontsetatsize{smaller}{smaller}{smaller}{9.5pt} {false}
-
-\def\titlefont#1{{\titlefonts\rm #1}}
-\let\subsecfonts = \ssecfonts
-\let\subsubsecfonts = \ssecfonts
-
-% Define these just so they can be easily changed for other fonts.
-\def\angleleft{$\langle$}
-\def\angleright{$\rangle$}
-
-% Set the fonts to use with the @small... environments.
-\let\smallexamplefonts = \smallfonts
-
-% About \smallexamplefonts.  If we use \smallfonts (9pt), @smallexample
-% can fit this many characters:
-%   8.5x11=86   smallbook=72  a4=90  a5=69
-% If we use \scriptfonts (8pt), then we can fit this many characters:
-%   8.5x11=90+  smallbook=80  a4=90+  a5=77
-% For me, subjectively, the few extra characters that fit aren't worth
-% the additional smallness of 8pt.  So I'm making the default 9pt.
-%
-% By the way, for comparison, here's what fits with @example (10pt):
-%   8.5x11=71  smallbook=60  a4=75  a5=58
-% --karl, 24jan03.
-
-% Set up the default fonts, so we can use them for creating boxes.
-%
-\definetextfontsizexi
-
-
-\message{markup,}
-
-% Check if we are currently using a typewriter font.  Since all the
-% Computer Modern typewriter fonts have zero interword stretch (and
-% shrink), and it is reasonable to expect all typewriter fonts to have
-% this property, we can check that font parameter.
-%
-\def\ifmonospace{\ifdim\fontdimen3\font=0pt }
-
-% Markup style infrastructure.  \defmarkupstylesetup\INITMACRO will
-% define and register \INITMACRO to be called on markup style changes.
-% \INITMACRO can check \currentmarkupstyle for the innermost
-% style.
-
-\let\currentmarkupstyle\empty
-
-\def\setupmarkupstyle#1{%
-  \def\currentmarkupstyle{#1}%
-  \markupstylesetup
-}
-
-\let\markupstylesetup\empty
-
-\def\defmarkupstylesetup#1{%
-  \expandafter\def\expandafter\markupstylesetup
-    \expandafter{\markupstylesetup #1}%
-  \def#1%
-}
-
-% Markup style setup for left and right quotes.
-\defmarkupstylesetup\markupsetuplq{%
-  \expandafter\let\expandafter \temp
-    \csname markupsetuplq\currentmarkupstyle\endcsname
-  \ifx\temp\relax \markupsetuplqdefault \else \temp \fi
-}
-
-\defmarkupstylesetup\markupsetuprq{%
-  \expandafter\let\expandafter \temp
-    \csname markupsetuprq\currentmarkupstyle\endcsname
-  \ifx\temp\relax \markupsetuprqdefault \else \temp \fi
-}
-
-{
-\catcode`\'=\active
-\catcode`\`=\active
-
-\gdef\markupsetuplqdefault{\let`\lq}
-\gdef\markupsetuprqdefault{\let'\rq}
-
-\gdef\markupsetcodequoteleft{\let`\codequoteleft}
-\gdef\markupsetcodequoteright{\let'\codequoteright}
-}
-
-\let\markupsetuplqcode \markupsetcodequoteleft
-\let\markupsetuprqcode \markupsetcodequoteright
-%
-\let\markupsetuplqexample \markupsetcodequoteleft
-\let\markupsetuprqexample \markupsetcodequoteright
-%
-\let\markupsetuplqkbd     \markupsetcodequoteleft
-\let\markupsetuprqkbd     \markupsetcodequoteright
-%
-\let\markupsetuplqsamp \markupsetcodequoteleft
-\let\markupsetuprqsamp \markupsetcodequoteright
-%
-\let\markupsetuplqverb \markupsetcodequoteleft
-\let\markupsetuprqverb \markupsetcodequoteright
-%
-\let\markupsetuplqverbatim \markupsetcodequoteleft
-\let\markupsetuprqverbatim \markupsetcodequoteright
-
-% Allow an option to not use regular directed right quote/apostrophe
-% (char 0x27), but instead the undirected quote from cmtt (char 0x0d).
-% The undirected quote is ugly, so don't make it the default, but it
-% works for pasting with more pdf viewers (at least evince), the
-% lilypond developers report.  xpdf does work with the regular 0x27.
-%
-\def\codequoteright{%
-  \ifmonospace
-    \expandafter\ifx\csname SETtxicodequoteundirected\endcsname\relax
-      \expandafter\ifx\csname SETcodequoteundirected\endcsname\relax
-        '%
-      \else \char'15 \fi
-    \else \char'15 \fi
-   \else
-     '%
-   \fi
-}
-%
-% and a similar option for the left quote char vs. a grave accent.
-% Modern fonts display ASCII 0x60 as a grave accent, so some people like
-% the code environments to do likewise.
-%
-\def\codequoteleft{%
-  \ifmonospace
-    \expandafter\ifx\csname SETtxicodequotebacktick\endcsname\relax
-      \expandafter\ifx\csname SETcodequotebacktick\endcsname\relax
-        % [Knuth] pp. 380,381,391
-        % \relax disables Spanish ligatures ?` and !` of \tt font.
-        \relax`%
-      \else \char'22 \fi
-    \else \char'22 \fi
-   \else
-     \relax`%
-   \fi
-}
-
-% Commands to set the quote options.
-% 
-\parseargdef\codequoteundirected{%
-  \def\temp{#1}%
-  \ifx\temp\onword
-    \expandafter\let\csname SETtxicodequoteundirected\endcsname
-      = t%
-  \else\ifx\temp\offword
-    \expandafter\let\csname SETtxicodequoteundirected\endcsname
-      = \relax
-  \else
-    \errhelp = \EMsimple
-    \errmessage{Unknown @codequoteundirected value `\temp', must be on|off}%
-  \fi\fi
-}
-%
-\parseargdef\codequotebacktick{%
-  \def\temp{#1}%
-  \ifx\temp\onword
-    \expandafter\let\csname SETtxicodequotebacktick\endcsname
-      = t%
-  \else\ifx\temp\offword
-    \expandafter\let\csname SETtxicodequotebacktick\endcsname
-      = \relax
-  \else
-    \errhelp = \EMsimple
-    \errmessage{Unknown @codequotebacktick value `\temp', must be on|off}%
-  \fi\fi
-}
-
-% [Knuth] pp. 380,381,391, disable Spanish ligatures ?` and !` of \tt font.
-\def\noligaturesquoteleft{\relax\lq}
-
-% Count depth in font-changes, for error checks
-\newcount\fontdepth \fontdepth=0
-
-% Font commands.
-
-% #1 is the font command (\sl or \it), #2 is the text to slant.
-% If we are in a monospaced environment, however, 1) always use \ttsl,
-% and 2) do not add an italic correction.
-\def\dosmartslant#1#2{%
-  \ifusingtt 
-    {{\ttsl #2}\let\next=\relax}%
-    {\def\next{{#1#2}\futurelet\next\smartitaliccorrection}}%
-  \next
-}
-\def\smartslanted{\dosmartslant\sl}
-\def\smartitalic{\dosmartslant\it}
-
-% Output an italic correction unless \next (presumed to be the following
-% character) is such as not to need one.
-\def\smartitaliccorrection{%
-  \ifx\next,%
-  \else\ifx\next-%
-  \else\ifx\next.%
-  \else\ifx\next\.%
-  \else\ifx\next\comma%
-  \else\ptexslash
-  \fi\fi\fi\fi\fi
-  \aftersmartic
-}
-
-% Unconditional use \ttsl, and no ic.  @var is set to this for defuns.
-\def\ttslanted#1{{\ttsl #1}}
-
-% @cite is like \smartslanted except unconditionally use \sl.  We never want
-% ttsl for book titles, do we?
-\def\cite#1{{\sl #1}\futurelet\next\smartitaliccorrection}
-
-\def\aftersmartic{}
-\def\var#1{%
-  \let\saveaftersmartic = \aftersmartic
-  \def\aftersmartic{\null\let\aftersmartic=\saveaftersmartic}%
-  \smartslanted{#1}%
-}
-
-\let\i=\smartitalic
-\let\slanted=\smartslanted
-\let\dfn=\smartslanted
-\let\emph=\smartitalic
-
-% Explicit font changes: @r, @sc, undocumented @ii.
-\def\r#1{{\rm #1}}              % roman font
-\def\sc#1{{\smallcaps#1}}       % smallcaps font
-\def\ii#1{{\it #1}}             % italic font
-
-% @b, explicit bold.  Also @strong.
-\def\b#1{{\bf #1}}
-\let\strong=\b
-
-% @sansserif, explicit sans.
-\def\sansserif#1{{\sf #1}}
-
-% We can't just use \exhyphenpenalty, because that only has effect at
-% the end of a paragraph.  Restore normal hyphenation at the end of the
-% group within which \nohyphenation is presumably called.
-%
-\def\nohyphenation{\hyphenchar\font = -1  \aftergroup\restorehyphenation}
-\def\restorehyphenation{\hyphenchar\font = `- }
-
-% Set sfcode to normal for the chars that usually have another value.
-% Can't use plain's \frenchspacing because it uses the `\x notation, and
-% sometimes \x has an active definition that messes things up.
-%
-\catcode`@=11
-  \def\plainfrenchspacing{%
-    \sfcode`\.=\@m \sfcode`\?=\@m \sfcode`\!=\@m
-    \sfcode`\:=\@m \sfcode`\;=\@m \sfcode`\,=\@m
-    \def\endofsentencespacefactor{1000}% for @. and friends
-  }
-  \def\plainnonfrenchspacing{%
-    \sfcode`\.3000\sfcode`\?3000\sfcode`\!3000
-    \sfcode`\:2000\sfcode`\;1500\sfcode`\,1250
-    \def\endofsentencespacefactor{3000}% for @. and friends
-  }
-\catcode`@=\other
-\def\endofsentencespacefactor{3000}% default
-
-% @t, explicit typewriter.
-\def\t#1{%
-  {\tt \plainfrenchspacing #1}%
-  \null
-}
-
-% @samp.
-\def\samp#1{{\setupmarkupstyle{samp}\lq\tclose{#1}\rq\null}}
-
-% @indicateurl is \samp, that is, with quotes.
-\let\indicateurl=\samp
-
-% @code (and similar) prints in typewriter, but with spaces the same
-% size as normal in the surrounding text, without hyphenation, etc.
-% This is a subroutine for that.
-\def\tclose#1{%
-  {%
-    % Change normal interword space to be same as for the current font.
-    \spaceskip = \fontdimen2\font
-    %
-    % Switch to typewriter.
-    \tt
-    %
-    % But `\ ' produces the large typewriter interword space.
-    \def\ {{\spaceskip = 0pt{} }}%
-    %
-    % Turn off hyphenation.
-    \nohyphenation
-    %
-    \plainfrenchspacing
-    #1%
-  }%
-  \null % reset spacefactor to 1000
-}
-
-% We *must* turn on hyphenation at `-' and `_' in @code.
-% (But see \codedashfinish below.)
-% Otherwise, it is too hard to avoid overfull hboxes
-% in the Emacs manual, the Library manual, etc.
-%
-% Unfortunately, TeX uses one parameter (\hyphenchar) to control
-% both hyphenation at - and hyphenation within words.
-% We must therefore turn them both off (\tclose does that)
-% and arrange explicitly to hyphenate at a dash. -- rms.
-{
-  \catcode`\-=\active \catcode`\_=\active
-  \catcode`\'=\active \catcode`\`=\active
-  \global\let'=\rq \global\let`=\lq  % default definitions
-  %
-  \global\def\code{\begingroup
-    \setupmarkupstyle{code}%
-    % The following should really be moved into \setupmarkupstyle handlers.
-    \catcode\dashChar=\active  \catcode\underChar=\active
-    \ifallowcodebreaks
-     \let-\codedash
-     \let_\codeunder
-    \else
-     \let-\normaldash
-     \let_\realunder
-    \fi
-    % Given -foo (with a single dash), we do not want to allow a break
-    % after the hyphen.
-    \global\let\codedashprev=\codedash
-    %
-    \codex
-  }
-  %
-  \gdef\codedash{\futurelet\next\codedashfinish}
-  \gdef\codedashfinish{%
-    \normaldash % always output the dash character itself.
-    % 
-    % Now, output a discretionary to allow a line break, unless
-    % (a) the next character is a -, or
-    % (b) the preceding character is a -.
-    % E.g., given --posix, we do not want to allow a break after either -.
-    % Given --foo-bar, we do want to allow a break between the - and the b.
-    \ifx\next\codedash \else
-      \ifx\codedashprev\codedash 
-      \else \discretionary{}{}{}\fi
-    \fi
-    % we need the space after the = for the case when \next itself is a
-    % space token; it would get swallowed otherwise.  As in @code{- a}.
-    \global\let\codedashprev= \next
-  }
-}
-\def\normaldash{-}
-%
-\def\codex #1{\tclose{#1}\endgroup}
-
-\def\codeunder{%
-  % this is all so @math{@code{var_name}+1} can work.  In math mode, _
-  % is "active" (mathcode"8000) and \normalunderscore (or \char95, etc.)
-  % will therefore expand the active definition of _, which is us
-  % (inside @code that is), therefore an endless loop.
-  \ifusingtt{\ifmmode
-               \mathchar"075F % class 0=ordinary, family 7=ttfam, pos 0x5F=_.
-             \else\normalunderscore \fi
-             \discretionary{}{}{}}%
-            {\_}%
-}
-
-% An additional complication: the above will allow breaks after, e.g.,
-% each of the four underscores in __typeof__.  This is bad.
-% @allowcodebreaks provides a document-level way to turn breaking at -
-% and _ on and off.
-%
-\newif\ifallowcodebreaks  \allowcodebreakstrue
-
-\def\keywordtrue{true}
-\def\keywordfalse{false}
-
-\parseargdef\allowcodebreaks{%
-  \def\txiarg{#1}%
-  \ifx\txiarg\keywordtrue
-    \allowcodebreakstrue
-  \else\ifx\txiarg\keywordfalse
-    \allowcodebreaksfalse
-  \else
-    \errhelp = \EMsimple
-    \errmessage{Unknown @allowcodebreaks option `\txiarg', must be true|false}%
-  \fi\fi
-}
-
-% For @command, @env, @file, @option quotes seem unnecessary,
-% so use \code rather than \samp.
-\let\command=\code
-\let\env=\code
-\let\file=\code
-\let\option=\code
-
-% @uref (abbreviation for `urlref') aka @url takes an optional
-% (comma-separated) second argument specifying the text to display and
-% an optional third arg as text to display instead of (rather than in
-% addition to) the url itself.  First (mandatory) arg is the url.
-
-% TeX-only option to allow changing PDF output to show only the second
-% arg (if given), and not the url (which is then just the link target).
-\newif\ifurefurlonlylink
-
-% The main macro is \urefbreak, which allows breaking at expected
-% places within the url.  (There used to be another version, which
-% didn't support automatic breaking.)
-\def\urefbreak{\begingroup \urefcatcodes \dourefbreak}
-\let\uref=\urefbreak
-%
-\def\dourefbreak#1{\urefbreakfinish #1,,,\finish}
-\def\urefbreakfinish#1,#2,#3,#4\finish{% doesn't work in @example
-  \unsepspaces
-  \pdfurl{#1}%
-  \setbox0 = \hbox{\ignorespaces #3}%
-  \ifdim\wd0 > 0pt
-    \unhbox0 % third arg given, show only that
-  \else
-    \setbox0 = \hbox{\ignorespaces #2}% look for second arg
-    \ifdim\wd0 > 0pt
-      \ifpdf
-        % For pdfTeX and LuaTeX
-        \ifurefurlonlylink
-          % PDF plus option to not display url, show just arg
-          \unhbox0             
-        \else
-          % PDF, normally display both arg and url for consistency,
-          % visibility, if the pdf is eventually used to print, etc.
-          \unhbox0\ (\urefcode{#1})%
-        \fi
-      \else
-        \ifx\XeTeXrevision\thisisundefined
-          \unhbox0\ (\urefcode{#1})% DVI, always show arg and url
-        \else
-          % For XeTeX
-          \ifurefurlonlylink
-            % PDF plus option to not display url, show just arg
-            \unhbox0             
-          \else
-            % PDF, normally display both arg and url for consistency,
-            % visibility, if the pdf is eventually used to print, etc.
-            \unhbox0\ (\urefcode{#1})%
-          \fi
-        \fi
-      \fi
-    \else
-      \urefcode{#1}% only url given, so show it
-    \fi
-  \fi
-  \endlink
-\endgroup}
-
-% Allow line breaks around only a few characters (only).
-\def\urefcatcodes{%
-  \catcode`\&=\active \catcode`\.=\active
-  \catcode`\#=\active \catcode`\?=\active
-  \catcode`\/=\active
-}
-{
-  \urefcatcodes
-  %
-  \global\def\urefcode{\begingroup
-    \setupmarkupstyle{code}%
-    \urefcatcodes
-    \let&\urefcodeamp
-    \let.\urefcodedot
-    \let#\urefcodehash
-    \let?\urefcodequest
-    \let/\urefcodeslash
-    \codex
-  }
-  %
-  % By default, they are just regular characters.
-  \global\def&{\normalamp}
-  \global\def.{\normaldot}
-  \global\def#{\normalhash}
-  \global\def?{\normalquest}
-  \global\def/{\normalslash}
-}
-
-\def\urefcodeamp{\urefprebreak \&\urefpostbreak}
-\def\urefcodedot{\urefprebreak .\urefpostbreak}
-\def\urefcodehash{\urefprebreak \#\urefpostbreak}
-\def\urefcodequest{\urefprebreak ?\urefpostbreak}
-\def\urefcodeslash{\futurelet\next\urefcodeslashfinish}
-{
-  \catcode`\/=\active
-  \global\def\urefcodeslashfinish{%
-    \urefprebreak \slashChar
-    % Allow line break only after the final / in a sequence of
-    % slashes, to avoid line break between the slashes in http://.
-    \ifx\next/\else \urefpostbreak \fi
-  }
-}
-
-% By default we'll break after the special characters, but some people like to 
-% break before the special chars, so allow that.  Also allow no breaking at 
-% all, for manual control.
-% 
-\parseargdef\urefbreakstyle{%
-  \def\txiarg{#1}%
-  \ifx\txiarg\wordnone
-    \def\urefprebreak{\nobreak}\def\urefpostbreak{\nobreak}
-  \else\ifx\txiarg\wordbefore
-    \def\urefprebreak{\urefallowbreak}\def\urefpostbreak{\nobreak}
-  \else\ifx\txiarg\wordafter
-    \def\urefprebreak{\nobreak}\def\urefpostbreak{\urefallowbreak}
-  \else
-    \errhelp = \EMsimple
-    \errmessage{Unknown @urefbreakstyle setting `\txiarg'}%
-  \fi\fi\fi
-}
-\def\wordafter{after}
-\def\wordbefore{before}
-\def\wordnone{none}
-
-% Allow a ragged right output to aid breaking long URL's.  Putting stretch in 
-% between characters of the URL doesn't look good.
-\def\urefallowbreak{%
-  \hskip 0pt plus 4 em\relax
-  \allowbreak
-  \hskip 0pt plus -4 em\relax
-}
-
-\urefbreakstyle after
-
-% @url synonym for @uref, since that's how everyone uses it.
-%
-\let\url=\uref
-
-% rms does not like angle brackets --karl, 17may97.
-% So now @email is just like @uref, unless we are pdf.
-%
-%\def\email#1{\angleleft{\tt #1}\angleright}
-\ifpdforxetex
-  \def\email#1{\doemail#1,,\finish}
-  \def\doemail#1,#2,#3\finish{\begingroup
-    \unsepspaces
-    \pdfurl{mailto:#1}%
-    \setbox0 = \hbox{\ignorespaces #2}%
-    \ifdim\wd0>0pt\unhbox0\else\code{#1}\fi
-    \endlink
-  \endgroup}
-\else
-  \let\email=\uref
-\fi
-
-% @kbdinputstyle -- arg is `distinct' (@kbd uses slanted tty font always),
-%   `example' (@kbd uses ttsl only inside of @example and friends),
-%   or `code' (@kbd uses normal tty font always).
-\parseargdef\kbdinputstyle{%
-  \def\txiarg{#1}%
-  \ifx\txiarg\worddistinct
-    \gdef\kbdexamplefont{\ttsl}\gdef\kbdfont{\ttsl}%
-  \else\ifx\txiarg\wordexample
-    \gdef\kbdexamplefont{\ttsl}\gdef\kbdfont{\tt}%
-  \else\ifx\txiarg\wordcode
-    \gdef\kbdexamplefont{\tt}\gdef\kbdfont{\tt}%
-  \else
-    \errhelp = \EMsimple
-    \errmessage{Unknown @kbdinputstyle setting `\txiarg'}%
-  \fi\fi\fi
-}
-\def\worddistinct{distinct}
-\def\wordexample{example}
-\def\wordcode{code}
-
-% Default is `distinct'.
-\kbdinputstyle distinct
-
-% @kbd is like @code, except that if the argument is just one @key command,
-% then @kbd has no effect.
-\def\kbd#1{{\def\look{#1}\expandafter\kbdsub\look??\par}}
-
-\def\xkey{\key}
-\def\kbdsub#1#2#3\par{%
-  \def\one{#1}\def\three{#3}\def\threex{??}%
-  \ifx\one\xkey\ifx\threex\three \key{#2}%
-  \else{\tclose{\kbdfont\setupmarkupstyle{kbd}\look}}\fi
-  \else{\tclose{\kbdfont\setupmarkupstyle{kbd}\look}}\fi
-}
-
-% definition of @key that produces a lozenge.  Doesn't adjust to text size.
-%\setfont\keyrm\rmshape{8}{1000}{OT1}
-%\font\keysy=cmsy9
-%\def\key#1{{\keyrm\textfont2=\keysy \leavevmode\hbox{%
-%  \raise0.4pt\hbox{\angleleft}\kern-.08em\vtop{%
-%    \vbox{\hrule\kern-0.4pt
-%     \hbox{\raise0.4pt\hbox{\vphantom{\angleleft}}#1}}%
-%    \kern-0.4pt\hrule}%
-%  \kern-.06em\raise0.4pt\hbox{\angleright}}}}
-
-% definition of @key with no lozenge.  If the current font is already
-% monospace, don't change it; that way, we respect @kbdinputstyle.  But
-% if it isn't monospace, then use \tt.
-%
-\def\key#1{{\setupmarkupstyle{key}%
-  \nohyphenation
-  \ifmonospace\else\tt\fi
-  #1}\null}
-
-% @clicksequence{File @click{} Open ...}
-\def\clicksequence#1{\begingroup #1\endgroup}
-
-% @clickstyle @arrow   (by default)
-\parseargdef\clickstyle{\def\click{#1}}
-\def\click{\arrow}
-
-% Typeset a dimension, e.g., `in' or `pt'.  The only reason for the
-% argument is to make the input look right: @dmn{pt} instead of @dmn{}pt.
-%
-\def\dmn#1{\thinspace #1}
-
-% @acronym for "FBI", "NATO", and the like.
-% We print this one point size smaller, since it's intended for
-% all-uppercase.
-%
-\def\acronym#1{\doacronym #1,,\finish}
-\def\doacronym#1,#2,#3\finish{%
-  {\switchtolsize #1}%
-  \def\temp{#2}%
-  \ifx\temp\empty \else
-    \space ({\unsepspaces \ignorespaces \temp \unskip})%
-  \fi
-  \null % reset \spacefactor=1000
-}
-
-% @abbr for "Comput. J." and the like.
-% No font change, but don't do end-of-sentence spacing.
-%
-\def\abbr#1{\doabbr #1,,\finish}
-\def\doabbr#1,#2,#3\finish{%
-  {\plainfrenchspacing #1}%
-  \def\temp{#2}%
-  \ifx\temp\empty \else
-    \space ({\unsepspaces \ignorespaces \temp \unskip})%
-  \fi
-  \null % reset \spacefactor=1000
-}
-
-% @asis just yields its argument.  Used with @table, for example.
-%
-\def\asis#1{#1}
-
-% @math outputs its argument in math mode.
-%
-% One complication: _ usually means subscripts, but it could also mean
-% an actual _ character, as in @math{@var{some_variable} + 1}.  So make
-% _ active, and distinguish by seeing if the current family is \slfam,
-% which is what @var uses.
-{
-  \catcode`\_ = \active
-  \gdef\mathunderscore{%
-    \catcode`\_=\active
-    \def_{\ifnum\fam=\slfam \_\else\sb\fi}%
-  }
-}
-% Another complication: we want \\ (and @\) to output a math (or tt) \.
-% FYI, plain.tex uses \\ as a temporary control sequence (for no
-% particular reason), but this is not advertised and we don't care.
-%
-% The \mathchar is class=0=ordinary, family=7=ttfam, position=5C=\.
-\def\mathbackslash{\ifnum\fam=\ttfam \mathchar"075C \else\backslash \fi}
-%
-\def\math{%
-  \ifmmode\else % only go into math if not in math mode already
-    \tex
-    \mathunderscore
-    \let\\ = \mathbackslash
-    \mathactive
-    % make the texinfo accent commands work in math mode
-    \let\"=\ddot
-    \let\'=\acute
-    \let\==\bar
-    \let\^=\hat
-    \let\`=\grave
-    \let\u=\breve
-    \let\v=\check
-    \let\~=\tilde
-    \let\dotaccent=\dot
-    % have to provide another name for sup operator
-    \let\mathopsup=\sup
-  $\expandafter\finishmath\fi
-}
-\def\finishmath#1{#1$\endgroup}  % Close the group opened by \tex.
-
-% Some active characters (such as <) are spaced differently in math.
-% We have to reset their definitions in case the @math was an argument
-% to a command which sets the catcodes (such as @item or @section).
-%
-{
-  \catcode`^ = \active
-  \catcode`< = \active
-  \catcode`> = \active
-  \catcode`+ = \active
-  \catcode`' = \active
-  \gdef\mathactive{%
-    \let^ = \ptexhat
-    \let< = \ptexless
-    \let> = \ptexgtr
-    \let+ = \ptexplus
-    \let' = \ptexquoteright
-  }
-}
-
-% for @sub and @sup, if in math mode, just do a normal sub/superscript.
-% If in text, use math to place as sub/superscript, but switch
-% into text mode, with smaller fonts.  This is a different font than the
-% one used for real math sub/superscripts (8pt vs. 7pt), but let's not
-% fix it (significant additions to font machinery) until someone notices.
-%
-\def\sub{\ifmmode \expandafter\sb \else \expandafter\finishsub\fi}
-\def\finishsub#1{$\sb{\hbox{\switchtolllsize #1}}$}%
-%
-\def\sup{\ifmmode \expandafter\ptexsp \else \expandafter\finishsup\fi}
-\def\finishsup#1{$\ptexsp{\hbox{\switchtolllsize #1}}$}%
-
-% @inlinefmt{FMTNAME,PROCESSED-TEXT} and @inlineraw{FMTNAME,RAW-TEXT}.
-% Ignore unless FMTNAME == tex; then it is like @iftex and @tex,
-% except specified as a normal braced arg, so no newlines to worry about.
-% 
-\def\outfmtnametex{tex}
-%
-\long\def\inlinefmt#1{\doinlinefmt #1,\finish}
-\long\def\doinlinefmt#1,#2,\finish{%
-  \def\inlinefmtname{#1}%
-  \ifx\inlinefmtname\outfmtnametex \ignorespaces #2\fi
-}
-% 
-% @inlinefmtifelse{FMTNAME,THEN-TEXT,ELSE-TEXT} expands THEN-TEXT if
-% FMTNAME is tex, else ELSE-TEXT.
-\long\def\inlinefmtifelse#1{\doinlinefmtifelse #1,,,\finish}
-\long\def\doinlinefmtifelse#1,#2,#3,#4,\finish{%
-  \def\inlinefmtname{#1}%
-  \ifx\inlinefmtname\outfmtnametex \ignorespaces #2\else \ignorespaces #3\fi
-}
-%
-% For raw, must switch into @tex before parsing the argument, to avoid
-% setting catcodes prematurely.  Doing it this way means that, for
-% example, @inlineraw{html, foo{bar} gets a parse error instead of being
-% ignored.  But this isn't important because if people want a literal
-% *right* brace they would have to use a command anyway, so they may as
-% well use a command to get a left brace too.  We could re-use the
-% delimiter character idea from \verb, but it seems like overkill.
-% 
-\long\def\inlineraw{\tex \doinlineraw}
-\long\def\doinlineraw#1{\doinlinerawtwo #1,\finish}
-\def\doinlinerawtwo#1,#2,\finish{%
-  \def\inlinerawname{#1}%
-  \ifx\inlinerawname\outfmtnametex \ignorespaces #2\fi
-  \endgroup % close group opened by \tex.
-}
-
-% @inlineifset{VAR, TEXT} expands TEXT if VAR is @set.
-%
-\long\def\inlineifset#1{\doinlineifset #1,\finish}
-\long\def\doinlineifset#1,#2,\finish{%
-  \def\inlinevarname{#1}%
-  \expandafter\ifx\csname SET\inlinevarname\endcsname\relax
-  \else\ignorespaces#2\fi
-}
-
-% @inlineifclear{VAR, TEXT} expands TEXT if VAR is not @set.
-%
-\long\def\inlineifclear#1{\doinlineifclear #1,\finish}
-\long\def\doinlineifclear#1,#2,\finish{%
-  \def\inlinevarname{#1}%
-  \expandafter\ifx\csname SET\inlinevarname\endcsname\relax \ignorespaces#2\fi
-}
-
-
-\message{glyphs,}
-% and logos.
-
-% @@ prints an @, as does @atchar{}.
-\def\@{\char64 }
-\let\atchar=\@
-
-% @{ @} @lbracechar{} @rbracechar{} all generate brace characters.
-\def\lbracechar{{\ifmonospace\char123\else\ensuremath\lbrace\fi}}
-\def\rbracechar{{\ifmonospace\char125\else\ensuremath\rbrace\fi}}
-\let\{=\lbracechar
-\let\}=\rbracechar
-
-% @comma{} to avoid , parsing problems.
-\let\comma = ,
-
-% Accents: @, @dotaccent @ringaccent @ubaraccent @udotaccent
-% Others are defined by plain TeX: @` @' @" @^ @~ @= @u @v @H.
-\let\, = \ptexc
-\let\dotaccent = \ptexdot
-\def\ringaccent#1{{\accent23 #1}}
-\let\tieaccent = \ptext
-\let\ubaraccent = \ptexb
-\let\udotaccent = \d
-
-% Other special characters: @questiondown @exclamdown @ordf @ordm
-% Plain TeX defines: @AA @AE @O @OE @L (plus lowercase versions) @ss.
-\def\questiondown{?`}
-\def\exclamdown{!`}
-\def\ordf{\leavevmode\raise1ex\hbox{\switchtolllsize \underbar{a}}}
-\def\ordm{\leavevmode\raise1ex\hbox{\switchtolllsize \underbar{o}}}
-
-% Dotless i and dotless j, used for accents.
-\def\imacro{i}
-\def\jmacro{j}
-\def\dotless#1{%
-  \def\temp{#1}%
-  \ifx\temp\imacro \ifmmode\imath \else\ptexi \fi
-  \else\ifx\temp\jmacro \ifmmode\jmath \else\j \fi
-  \else \errmessage{@dotless can be used only with i or j}%
-  \fi\fi
-}
-
-% The \TeX{} logo, as in plain, but resetting the spacing so that a
-% period following counts as ending a sentence.  (Idea found in latex.)
-%
-\edef\TeX{\TeX \spacefactor=1000 }
-
-% @LaTeX{} logo.  Not quite the same results as the definition in
-% latex.ltx, since we use a different font for the raised A; it's most
-% convenient for us to use an explicitly smaller font, rather than using
-% the \scriptstyle font (since we don't reset \scriptstyle and
-% \scriptscriptstyle).
-%
-\def\LaTeX{%
-  L\kern-.36em
-  {\setbox0=\hbox{T}%
-   \vbox to \ht0{\hbox{%
-     \ifx\textnominalsize\xwordpt
-       % for 10pt running text, lllsize (8pt) is too small for the A in LaTeX.
-       % Revert to plain's \scriptsize, which is 7pt.
-       \count255=\the\fam $\fam\count255 \scriptstyle A$%
-     \else
-       % For 11pt, we can use our lllsize.
-       \switchtolllsize A%
-     \fi
-     }%
-     \vss
-  }}%
-  \kern-.15em
-  \TeX
-}
-
-% Some math mode symbols.  Define \ensuremath to switch into math mode
-% unless we are already there.  Expansion tricks may not be needed here,
-% but safer, and can't hurt.
-\def\ensuremath{\ifmmode \expandafter\asis \else\expandafter\ensuredmath \fi}
-\def\ensuredmath#1{$\relax#1$}
-%
-\def\bullet{\ensuremath\ptexbullet}
-\def\geq{\ensuremath\ge}
-\def\leq{\ensuremath\le}
-\def\minus{\ensuremath-}
-
-% @dots{} outputs an ellipsis using the current font.
-% We do .5em per period so that it has the same spacing in the cm
-% typewriter fonts as three actual period characters; on the other hand,
-% in other typewriter fonts three periods are wider than 1.5em.  So do
-% whichever is larger.
-%
-\def\dots{%
-  \leavevmode
-  \setbox0=\hbox{...}% get width of three periods
-  \ifdim\wd0 > 1.5em
-    \dimen0 = \wd0
-  \else
-    \dimen0 = 1.5em
-  \fi
-  \hbox to \dimen0{%
-    \hskip 0pt plus.25fil
-    .\hskip 0pt plus1fil
-    .\hskip 0pt plus1fil
-    .\hskip 0pt plus.5fil
-  }%
-}
-
-% @enddots{} is an end-of-sentence ellipsis.
-%
-\def\enddots{%
-  \dots
-  \spacefactor=\endofsentencespacefactor
-}
-
-% @point{}, @result{}, @expansion{}, @print{}, @equiv{}.
-%
-% Since these characters are used in examples, they should be an even number of
-% \tt widths. Each \tt character is 1en, so two makes it 1em.
-%
-\def\point{$\star$}
-\def\arrow{\leavevmode\raise.05ex\hbox to 1em{\hfil$\rightarrow$\hfil}}
-\def\result{\leavevmode\raise.05ex\hbox to 1em{\hfil$\Rightarrow$\hfil}}
-\def\expansion{\leavevmode\hbox to 1em{\hfil$\mapsto$\hfil}}
-\def\print{\leavevmode\lower.1ex\hbox to 1em{\hfil$\dashv$\hfil}}
-\def\equiv{\leavevmode\hbox to 1em{\hfil$\ptexequiv$\hfil}}
-
-% The @error{} command.
-% Adapted from the TeXbook's \boxit.
-%
-\newbox\errorbox
-%
-{\ttfont \global\dimen0 = 3em}% Width of the box.
-\dimen2 = .55pt % Thickness of rules
-% The text. (`r' is open on the right, `e' somewhat less so on the left.)
-\setbox0 = \hbox{\kern-.75pt \reducedsf \putworderror\kern-1.5pt}
-%
-\setbox\errorbox=\hbox to \dimen0{\hfil
-   \hsize = \dimen0 \advance\hsize by -5.8pt % Space to left+right.
-   \advance\hsize by -2\dimen2 % Rules.
-   \vbox{%
-      \hrule height\dimen2
-      \hbox{\vrule width\dimen2 \kern3pt          % Space to left of text.
-         \vtop{\kern2.4pt \box0 \kern2.4pt}% Space above/below.
-         \kern3pt\vrule width\dimen2}% Space to right.
-      \hrule height\dimen2}
-    \hfil}
-%
-\def\error{\leavevmode\lower.7ex\copy\errorbox}
-
-% @pounds{} is a sterling sign, which Knuth put in the CM italic font.
-%
-\def\pounds{{\it\$}}
-
-% @euro{} comes from a separate font, depending on the current style.
-% We use the free feym* fonts from the eurosym package by Henrik
-% Theiling, which support regular, slanted, bold and bold slanted (and
-% "outlined" (blackboard board, sort of) versions, which we don't need).
-% It is available from http://www.ctan.org/tex-archive/fonts/eurosym.
-%
-% Although only regular is the truly official Euro symbol, we ignore
-% that.  The Euro is designed to be slightly taller than the regular
-% font height.
-%
-% feymr - regular
-% feymo - slanted
-% feybr - bold
-% feybo - bold slanted
-%
-% There is no good (free) typewriter version, to my knowledge.
-% A feymr10 euro is ~7.3pt wide, while a normal cmtt10 char is ~5.25pt wide.
-% Hmm.
-%
-% Also doesn't work in math.  Do we need to do math with euro symbols?
-% Hope not.
-%
-%
-\def\euro{{\eurofont e}}
-\def\eurofont{%
-  % We set the font at each command, rather than predefining it in
-  % \textfonts and the other font-switching commands, so that
-  % installations which never need the symbol don't have to have the
-  % font installed.
-  %
-  % There is only one designed size (nominal 10pt), so we always scale
-  % that to the current nominal size.
-  %
-  % By the way, simply using "at 1em" works for cmr10 and the like, but
-  % does not work for cmbx10 and other extended/shrunken fonts.
-  %
-  \def\eurosize{\csname\curfontsize nominalsize\endcsname}%
-  %
-  \ifx\curfontstyle\bfstylename
-    % bold:
-    \font\thiseurofont = \ifusingit{feybo10}{feybr10} at \eurosize
-  \else
-    % regular:
-    \font\thiseurofont = \ifusingit{feymo10}{feymr10} at \eurosize
-  \fi
-  \thiseurofont
-}
-
-% Glyphs from the EC fonts.  We don't use \let for the aliases, because
-% sometimes we redefine the original macro, and the alias should reflect
-% the redefinition.
-%
-% Use LaTeX names for the Icelandic letters.
-\def\DH{{\ecfont \char"D0}} % Eth
-\def\dh{{\ecfont \char"F0}} % eth
-\def\TH{{\ecfont \char"DE}} % Thorn
-\def\th{{\ecfont \char"FE}} % thorn
-%
-\def\guillemetleft{{\ecfont \char"13}}
-\def\guillemotleft{\guillemetleft}
-\def\guillemetright{{\ecfont \char"14}}
-\def\guillemotright{\guillemetright}
-\def\guilsinglleft{{\ecfont \char"0E}}
-\def\guilsinglright{{\ecfont \char"0F}}
-\def\quotedblbase{{\ecfont \char"12}}
-\def\quotesinglbase{{\ecfont \char"0D}}
-%
-% This positioning is not perfect (see the ogonek LaTeX package), but
-% we have the precomposed glyphs for the most common cases.  We put the
-% tests to use those glyphs in the single \ogonek macro so we have fewer
-% dummy definitions to worry about for index entries, etc.
-%
-% ogonek is also used with other letters in Lithuanian (IOU), but using
-% the precomposed glyphs for those is not so easy since they aren't in
-% the same EC font.
-\def\ogonek#1{{%
-  \def\temp{#1}%
-  \ifx\temp\macrocharA\Aogonek
-  \else\ifx\temp\macrochara\aogonek
-  \else\ifx\temp\macrocharE\Eogonek
-  \else\ifx\temp\macrochare\eogonek
-  \else
-    \ecfont \setbox0=\hbox{#1}%
-    \ifdim\ht0=1ex\accent"0C #1%
-    \else\ooalign{\unhbox0\crcr\hidewidth\char"0C \hidewidth}%
-    \fi
-  \fi\fi\fi\fi
-  }%
-}
-\def\Aogonek{{\ecfont \char"81}}\def\macrocharA{A}
-\def\aogonek{{\ecfont \char"A1}}\def\macrochara{a}
-\def\Eogonek{{\ecfont \char"86}}\def\macrocharE{E}
-\def\eogonek{{\ecfont \char"A6}}\def\macrochare{e}
-%
-% Use the European Computer Modern fonts (cm-super in outline format)
-% for non-CM glyphs.  That is ec* for regular text and tc* for the text
-% companion symbols (LaTeX TS1 encoding).  Both are part of the ec
-% package and follow the same conventions.
-% 
-\def\ecfont{\etcfont{e}}
-\def\tcfont{\etcfont{t}}
-%
-\def\etcfont#1{%
-  % We can't distinguish serif/sans and italic/slanted, but this
-  % is used for crude hacks anyway (like adding French and German
-  % quotes to documents typeset with CM, where we lose kerning), so
-  % hopefully nobody will notice/care.
-  \edef\ecsize{\csname\curfontsize ecsize\endcsname}%
-  \edef\nominalsize{\csname\curfontsize nominalsize\endcsname}%
-  \ifmonospace
-    % typewriter:
-    \font\thisecfont = #1ctt\ecsize \space at \nominalsize
-  \else
-    \ifx\curfontstyle\bfstylename
-      % bold:
-      \font\thisecfont = #1cb\ifusingit{i}{x}\ecsize \space at \nominalsize
-    \else
-      % regular:
-      \font\thisecfont = #1c\ifusingit{ti}{rm}\ecsize \space at \nominalsize
-    \fi
-  \fi
-  \thisecfont
-}
-
-% @registeredsymbol - R in a circle.  The font for the R should really
-% be smaller yet, but lllsize is the best we can do for now.
-% Adapted from the plain.tex definition of \copyright.
-%
-\def\registeredsymbol{%
-  $^{{\ooalign{\hfil\raise.07ex\hbox{\switchtolllsize R}%
-               \hfil\crcr\Orb}}%
-    }$%
-}
-
-% @textdegree - the normal degrees sign.
-%
-\def\textdegree{$^\circ$}
-
-% Laurent Siebenmann reports \Orb undefined with:
-%  Textures 1.7.7 (preloaded format=plain 93.10.14)  (68K)  16 APR 2004 02:38
-% so we'll define it if necessary.
-%
-\ifx\Orb\thisisundefined
-\def\Orb{\mathhexbox20D}
-\fi
-
-% Quotes.
-\chardef\quotedblleft="5C
-\chardef\quotedblright=`\"
-\chardef\quoteleft=`\`
-\chardef\quoteright=`\'
-
-
-\message{page headings,}
-
-\newskip\titlepagetopglue \titlepagetopglue = 1.5in
-\newskip\titlepagebottomglue \titlepagebottomglue = 2pc
-
-% First the title page.  Must do @settitle before @titlepage.
-\newif\ifseenauthor
-\newif\iffinishedtitlepage
-
-% @setcontentsaftertitlepage used to do an implicit @contents or
-% @shortcontents after @end titlepage, but it is now obsolete.
-\def\setcontentsaftertitlepage{%
-  \errmessage{@setcontentsaftertitlepage has been removed as a Texinfo
-              command; move your @contents command if you want the contents
-              after the title page.}}%
-\def\setshortcontentsaftertitlepage{%
-  \errmessage{@setshortcontentsaftertitlepage has been removed as a Texinfo
-              command; move your @shortcontents and @contents commands if you 
-              want the contents after the title page.}}%
-
-\parseargdef\shorttitlepage{%
-  \begingroup \hbox{}\vskip 1.5in \chaprm \centerline{#1}%
-  \endgroup\page\hbox{}\page}
-
-\envdef\titlepage{%
-  % Open one extra group, as we want to close it in the middle of \Etitlepage.
-  \begingroup
-    \parindent=0pt \textfonts
-    % Leave some space at the very top of the page.
-    \vglue\titlepagetopglue
-    % No rule at page bottom unless we print one at the top with @title.
-    \finishedtitlepagetrue
-    %
-    % Most title ``pages'' are actually two pages long, with space
-    % at the top of the second.  We don't want the ragged left on the second.
-    \let\oldpage = \page
-    \def\page{%
-      \iffinishedtitlepage\else
-	 \finishtitlepage
-      \fi
-      \let\page = \oldpage
-      \page
-      \null
-    }%
-}
-
-\def\Etitlepage{%
-    \iffinishedtitlepage\else
-	\finishtitlepage
-    \fi
-    % It is important to do the page break before ending the group,
-    % because the headline and footline are only empty inside the group.
-    % If we use the new definition of \page, we always get a blank page
-    % after the title page, which we certainly don't want.
-    \oldpage
-  \endgroup
-  %
-  % Need this before the \...aftertitlepage checks so that if they are
-  % in effect the toc pages will come out with page numbers.
-  \HEADINGSon
-}
-
-\def\finishtitlepage{%
-  \vskip4pt \hrule height 2pt width \hsize
-  \vskip\titlepagebottomglue
-  \finishedtitlepagetrue
-}
-
-% Settings used for typesetting titles: no hyphenation, no indentation,
-% don't worry much about spacing, ragged right.  This should be used
-% inside a \vbox, and fonts need to be set appropriately first. \par should
-% be specified before the end of the \vbox, since a vbox is a group.
-% 
-\def\raggedtitlesettings{%
-  \rm
-  \hyphenpenalty=10000
-  \parindent=0pt
-  \tolerance=5000
-  \ptexraggedright
-}
-
-% Macros to be used within @titlepage:
-
-\let\subtitlerm=\rmfont
-\def\subtitlefont{\subtitlerm \normalbaselineskip = 13pt \normalbaselines}
-
-\parseargdef\title{%
-  \checkenv\titlepage
-  \vbox{\titlefonts \raggedtitlesettings #1\par}%
-  % print a rule at the page bottom also.
-  \finishedtitlepagefalse
-  \vskip4pt \hrule height 4pt width \hsize \vskip4pt
-}
-
-\parseargdef\subtitle{%
-  \checkenv\titlepage
-  {\subtitlefont \rightline{#1}}%
-}
-
-% @author should come last, but may come many times.
-% It can also be used inside @quotation.
-%
-\parseargdef\author{%
-  \def\temp{\quotation}%
-  \ifx\thisenv\temp
-    \def\quotationauthor{#1}% printed in \Equotation.
-  \else
-    \checkenv\titlepage
-    \ifseenauthor\else \vskip 0pt plus 1filll \seenauthortrue \fi
-    {\secfonts\rm \leftline{#1}}%
-  \fi
-}
-
-
-% Set up page headings and footings.
-
-\let\thispage=\folio
-
-\newtoks\evenheadline    % headline on even pages
-\newtoks\oddheadline     % headline on odd pages
-\newtoks\evenfootline    % footline on even pages
-\newtoks\oddfootline     % footline on odd pages
-
-% Now make \makeheadline and \makefootline in Plain TeX use those variables
-\headline={{\textfonts\rm \ifodd\pageno \the\oddheadline
-                            \else \the\evenheadline \fi}}
-\footline={{\textfonts\rm \ifodd\pageno \the\oddfootline
-                            \else \the\evenfootline \fi}\HEADINGShook}
-\let\HEADINGShook=\relax
-
-% Commands to set those variables.
-% For example, this is what  @headings on  does
-% @evenheading @thistitle|@thispage|@thischapter
-% @oddheading @thischapter|@thispage|@thistitle
-% @evenfooting @thisfile||
-% @oddfooting ||@thisfile
-
-
-\def\evenheading{\parsearg\evenheadingxxx}
-\def\evenheadingxxx #1{\evenheadingyyy #1\|\|\|\|\finish}
-\def\evenheadingyyy #1\|#2\|#3\|#4\finish{%
-\global\evenheadline={\rlap{\centerline{#2}}\line{#1\hfil#3}}}
-
-\def\oddheading{\parsearg\oddheadingxxx}
-\def\oddheadingxxx #1{\oddheadingyyy #1\|\|\|\|\finish}
-\def\oddheadingyyy #1\|#2\|#3\|#4\finish{%
-\global\oddheadline={\rlap{\centerline{#2}}\line{#1\hfil#3}}}
-
-\parseargdef\everyheading{\oddheadingxxx{#1}\evenheadingxxx{#1}}%
-
-\def\evenfooting{\parsearg\evenfootingxxx}
-\def\evenfootingxxx #1{\evenfootingyyy #1\|\|\|\|\finish}
-\def\evenfootingyyy #1\|#2\|#3\|#4\finish{%
-\global\evenfootline={\rlap{\centerline{#2}}\line{#1\hfil#3}}}
-
-\def\oddfooting{\parsearg\oddfootingxxx}
-\def\oddfootingxxx #1{\oddfootingyyy #1\|\|\|\|\finish}
-\def\oddfootingyyy #1\|#2\|#3\|#4\finish{%
-  \global\oddfootline = {\rlap{\centerline{#2}}\line{#1\hfil#3}}%
-  %
-  % Leave some space for the footline.  Hopefully ok to assume
-  % @evenfooting will not be used by itself.
-  \global\advance\txipageheight by -12pt
-  \global\advance\vsize by -12pt
-}
-
-\parseargdef\everyfooting{\oddfootingxxx{#1}\evenfootingxxx{#1}}
-
-% @evenheadingmarks top     \thischapter <- chapter at the top of a page
-% @evenheadingmarks bottom  \thischapter <- chapter at the bottom of a page
-%
-% The same set of arguments for:
-%
-% @oddheadingmarks
-% @evenfootingmarks
-% @oddfootingmarks
-% @everyheadingmarks
-% @everyfootingmarks
-
-% These define \getoddheadingmarks, \getevenheadingmarks,
-% \getoddfootingmarks, and \getevenfootingmarks, each to one of
-% \gettopheadingmarks, \getbottomheadingmarks.
-%
-\def\evenheadingmarks{\headingmarks{even}{heading}}
-\def\oddheadingmarks{\headingmarks{odd}{heading}}
-\def\evenfootingmarks{\headingmarks{even}{footing}}
-\def\oddfootingmarks{\headingmarks{odd}{footing}}
-\parseargdef\everyheadingmarks{\headingmarks{even}{heading}{#1}
-                          \headingmarks{odd}{heading}{#1} }
-\parseargdef\everyfootingmarks{\headingmarks{even}{footing}{#1}
-                          \headingmarks{odd}{footing}{#1} }
-% #1 = even/odd, #2 = heading/footing, #3 = top/bottom.
-\def\headingmarks#1#2#3 {%
-  \expandafter\let\expandafter\temp \csname get#3headingmarks\endcsname
-  \global\expandafter\let\csname get#1#2marks\endcsname \temp
-}
-
-\everyheadingmarks bottom
-\everyfootingmarks bottom
-
-% @headings double      turns headings on for double-sided printing.
-% @headings single      turns headings on for single-sided printing.
-% @headings off         turns them off.
-% @headings on          same as @headings double, retained for compatibility.
-% @headings after       turns on double-sided headings after this page.
-% @headings doubleafter turns on double-sided headings after this page.
-% @headings singleafter turns on single-sided headings after this page.
-% By default, they are off at the start of a document,
-% and turned `on' after @end titlepage.
-
-\parseargdef\headings{\csname HEADINGS#1\endcsname}
-
-\def\headingsoff{% non-global headings elimination
-  \evenheadline={\hfil}\evenfootline={\hfil}%
-   \oddheadline={\hfil}\oddfootline={\hfil}%
-}
-
-\def\HEADINGSoff{{\globaldefs=1 \headingsoff}} % global setting
-\HEADINGSoff  % it's the default
-
-% When we turn headings on, set the page number to 1.
-% For double-sided printing, put current file name in lower left corner,
-% chapter name on inside top of right hand pages, document
-% title on inside top of left hand pages, and page numbers on outside top
-% edge of all pages.
-\def\HEADINGSdouble{%
-\global\pageno=1
-\global\evenfootline={\hfil}
-\global\oddfootline={\hfil}
-\global\evenheadline={\line{\folio\hfil\thistitle}}
-\global\oddheadline={\line{\thischapterheading\hfil\folio}}
-\global\let\contentsalignmacro = \chapoddpage
-}
-\let\contentsalignmacro = \chappager
-
-% For single-sided printing, chapter title goes across top left of page,
-% page number on top right.
-\def\HEADINGSsingle{%
-\global\pageno=1
-\global\evenfootline={\hfil}
-\global\oddfootline={\hfil}
-\global\evenheadline={\line{\thischapterheading\hfil\folio}}
-\global\oddheadline={\line{\thischapterheading\hfil\folio}}
-\global\let\contentsalignmacro = \chappager
-}
-\def\HEADINGSon{\HEADINGSdouble}
-
-\def\HEADINGSafter{\let\HEADINGShook=\HEADINGSdoublex}
-\let\HEADINGSdoubleafter=\HEADINGSafter
-\def\HEADINGSdoublex{%
-\global\evenfootline={\hfil}
-\global\oddfootline={\hfil}
-\global\evenheadline={\line{\folio\hfil\thistitle}}
-\global\oddheadline={\line{\thischapterheading\hfil\folio}}
-\global\let\contentsalignmacro = \chapoddpage
-}
-
-\def\HEADINGSsingleafter{\let\HEADINGShook=\HEADINGSsinglex}
-\def\HEADINGSsinglex{%
-\global\evenfootline={\hfil}
-\global\oddfootline={\hfil}
-\global\evenheadline={\line{\thischapterheading\hfil\folio}}
-\global\oddheadline={\line{\thischapterheading\hfil\folio}}
-\global\let\contentsalignmacro = \chappager
-}
-
-% Subroutines used in generating headings
-% This produces Day Month Year style of output.
-% Only define if not already defined, in case a txi-??.tex file has set
-% up a different format (e.g., txi-cs.tex does this).
-\ifx\today\thisisundefined
-\def\today{%
-  \number\day\space
-  \ifcase\month
-  \or\putwordMJan\or\putwordMFeb\or\putwordMMar\or\putwordMApr
-  \or\putwordMMay\or\putwordMJun\or\putwordMJul\or\putwordMAug
-  \or\putwordMSep\or\putwordMOct\or\putwordMNov\or\putwordMDec
-  \fi
-  \space\number\year}
-\fi
-
-% @settitle line...  specifies the title of the document, for headings.
-% It generates no output of its own.
-\def\thistitle{\putwordNoTitle}
-\def\settitle{\parsearg{\gdef\thistitle}}
-
-
-\message{tables,}
-% Tables -- @table, @ftable, @vtable, @item(x).
-
-% default indentation of table text
-\newdimen\tableindent \tableindent=.8in
-% default indentation of @itemize and @enumerate text
-\newdimen\itemindent  \itemindent=.3in
-% margin between end of table item and start of table text.
-\newdimen\itemmargin  \itemmargin=.1in
-
-% used internally for \itemindent minus \itemmargin
-\newdimen\itemmax
-
-% Note @table, @ftable, and @vtable define @item, @itemx, etc., with
-% these defs.
-% They also define \itemindex
-% to index the item name in whatever manner is desired (perhaps none).
-
-\newif\ifitemxneedsnegativevskip
-
-\def\itemxpar{\par\ifitemxneedsnegativevskip\nobreak\vskip-\parskip\nobreak\fi}
-
-\def\internalBitem{\smallbreak \parsearg\itemzzz}
-\def\internalBitemx{\itemxpar \parsearg\itemzzz}
-
-\def\itemzzz #1{\begingroup %
-  \advance\hsize by -\rightskip
-  \advance\hsize by -\tableindent
-  \setbox0=\hbox{\itemindicate{#1}}%
-  \itemindex{#1}%
-  \nobreak % This prevents a break before @itemx.
-  %
-  % If the item text does not fit in the space we have, put it on a line
-  % by itself, and do not allow a page break either before or after that
-  % line.  We do not start a paragraph here because then if the next
-  % command is, e.g., @kindex, the whatsit would get put into the
-  % horizontal list on a line by itself, resulting in extra blank space.
-  \ifdim \wd0>\itemmax
-    %
-    % Make this a paragraph so we get the \parskip glue and wrapping,
-    % but leave it ragged-right.
-    \begingroup
-      \advance\leftskip by-\tableindent
-      \advance\hsize by\tableindent
-      \advance\rightskip by0pt plus1fil\relax
-      \leavevmode\unhbox0\par
-    \endgroup
-    %
-    % We're going to be starting a paragraph, but we don't want the
-    % \parskip glue -- logically it's part of the @item we just started.
-    \nobreak \vskip-\parskip
-    %
-    % Stop a page break at the \parskip glue coming up.  However, if
-    % what follows is an environment such as @example, there will be no
-    % \parskip glue; then the negative vskip we just inserted would
-    % cause the example and the item to crash together.  So we use this
-    % bizarre value of 10001 as a signal to \aboveenvbreak to insert
-    % \parskip glue after all.  Section titles are handled this way also.
-    %
-    \penalty 10001
-    \endgroup
-    \itemxneedsnegativevskipfalse
-  \else
-    % The item text fits into the space.  Start a paragraph, so that the
-    % following text (if any) will end up on the same line.
-    \noindent
-    % Do this with kerns and \unhbox so that if there is a footnote in
-    % the item text, it can migrate to the main vertical list and
-    % eventually be printed.
-    \nobreak\kern-\tableindent
-    \dimen0 = \itemmax  \advance\dimen0 by \itemmargin \advance\dimen0 by -\wd0
-    \unhbox0
-    \nobreak\kern\dimen0
-    \endgroup
-    \itemxneedsnegativevskiptrue
-  \fi
-}
-
-\def\item{\errmessage{@item while not in a list environment}}
-\def\itemx{\errmessage{@itemx while not in a list environment}}
-
-% @table, @ftable, @vtable.
-\envdef\table{%
-  \let\itemindex\gobble
-  \tablecheck{table}%
-}
-\envdef\ftable{%
-  \def\itemindex ##1{\doind {fn}{\code{##1}}}%
-  \tablecheck{ftable}%
-}
-\envdef\vtable{%
-  \def\itemindex ##1{\doind {vr}{\code{##1}}}%
-  \tablecheck{vtable}%
-}
-\def\tablecheck#1{%
-  \ifnum \the\catcode`\^^M=\active
-    \endgroup
-    \errmessage{This command won't work in this context; perhaps the problem is
-      that we are \inenvironment\thisenv}%
-    \def\next{\doignore{#1}}%
-  \else
-    \let\next\tablex
-  \fi
-  \next
-}
-\def\tablex#1{%
-  \def\itemindicate{#1}%
-  \parsearg\tabley
-}
-\def\tabley#1{%
-  {%
-    \makevalueexpandable
-    \edef\temp{\noexpand\tablez #1\space\space\space}%
-    \expandafter
-  }\temp \endtablez
-}
-\def\tablez #1 #2 #3 #4\endtablez{%
-  \aboveenvbreak
-  \ifnum 0#1>0 \advance \leftskip by #1\mil \fi
-  \ifnum 0#2>0 \tableindent=#2\mil \fi
-  \ifnum 0#3>0 \advance \rightskip by #3\mil \fi
-  \itemmax=\tableindent
-  \advance \itemmax by -\itemmargin
-  \advance \leftskip by \tableindent
-  \exdentamount=\tableindent
-  \parindent = 0pt
-  \parskip = \smallskipamount
-  \ifdim \parskip=0pt \parskip=2pt \fi
-  \let\item = \internalBitem
-  \let\itemx = \internalBitemx
-}
-\def\Etable{\endgraf\afterenvbreak}
-\let\Eftable\Etable
-\let\Evtable\Etable
-\let\Eitemize\Etable
-\let\Eenumerate\Etable
-
-% This is the counter used by @enumerate, which is really @itemize
-
-\newcount \itemno
-
-\envdef\itemize{\parsearg\doitemize}
-
-\def\doitemize#1{%
-  \aboveenvbreak
-  \itemmax=\itemindent
-  \advance\itemmax by -\itemmargin
-  \advance\leftskip by \itemindent
-  \exdentamount=\itemindent
-  \parindent=0pt
-  \parskip=\smallskipamount
-  \ifdim\parskip=0pt \parskip=2pt \fi
-  %
-  % Try typesetting the item mark so that if the document erroneously says
-  % something like @itemize @samp (intending @table), there's an error
-  % right away at the @itemize.  It's not the best error message in the
-  % world, but it's better than leaving it to the @item.  This means if
-  % the user wants an empty mark, they have to say @w{} not just @w.
-  \def\itemcontents{#1}%
-  \setbox0 = \hbox{\itemcontents}%
-  %
-  % @itemize with no arg is equivalent to @itemize @bullet.
-  \ifx\itemcontents\empty\def\itemcontents{\bullet}\fi
-  %
-  \let\item=\itemizeitem
-}
-
-% Definition of @item while inside @itemize and @enumerate.
-%
-\def\itemizeitem{%
-  \advance\itemno by 1  % for enumerations
-  {\let\par=\endgraf \smallbreak}% reasonable place to break
-  {%
-   % If the document has an @itemize directly after a section title, a
-   % \nobreak will be last on the list, and \sectionheading will have
-   % done a \vskip-\parskip.  In that case, we don't want to zero
-   % parskip, or the item text will crash with the heading.  On the
-   % other hand, when there is normal text preceding the item (as there
-   % usually is), we do want to zero parskip, or there would be too much
-   % space.  In that case, we won't have a \nobreak before.  At least
-   % that's the theory.
-   \ifnum\lastpenalty<10000 \parskip=0in \fi
-   \noindent
-   \hbox to 0pt{\hss \itemcontents \kern\itemmargin}%
-   %
-   \ifinner\else
-     \vadjust{\penalty 1200}% not good to break after first line of item.
-   \fi
-   % We can be in inner vertical mode in a footnote, although an
-   % @itemize looks awful there.
-  }%
-  \flushcr
-}
-
-% \splitoff TOKENS\endmark defines \first to be the first token in
-% TOKENS, and \rest to be the remainder.
-%
-\def\splitoff#1#2\endmark{\def\first{#1}\def\rest{#2}}%
-
-% Allow an optional argument of an uppercase letter, lowercase letter,
-% or number, to specify the first label in the enumerated list.  No
-% argument is the same as `1'.
-%
-\envparseargdef\enumerate{\enumeratey #1  \endenumeratey}
-\def\enumeratey #1 #2\endenumeratey{%
-  % If we were given no argument, pretend we were given `1'.
-  \def\thearg{#1}%
-  \ifx\thearg\empty \def\thearg{1}\fi
-  %
-  % Detect if the argument is a single token.  If so, it might be a
-  % letter.  Otherwise, the only valid thing it can be is a number.
-  % (We will always have one token, because of the test we just made.
-  % This is a good thing, since \splitoff doesn't work given nothing at
-  % all -- the first parameter is undelimited.)
-  \expandafter\splitoff\thearg\endmark
-  \ifx\rest\empty
-    % Only one token in the argument.  It could still be anything.
-    % A ``lowercase letter'' is one whose \lccode is nonzero.
-    % An ``uppercase letter'' is one whose \lccode is both nonzero, and
-    %   not equal to itself.
-    % Otherwise, we assume it's a number.
-    %
-    % We need the \relax at the end of the \ifnum lines to stop TeX from
-    % continuing to look for a <number>.
-    %
-    \ifnum\lccode\expandafter`\thearg=0\relax
-      \numericenumerate % a number (we hope)
-    \else
-      % It's a letter.
-      \ifnum\lccode\expandafter`\thearg=\expandafter`\thearg\relax
-        \lowercaseenumerate % lowercase letter
-      \else
-        \uppercaseenumerate % uppercase letter
-      \fi
-    \fi
-  \else
-    % Multiple tokens in the argument.  We hope it's a number.
-    \numericenumerate
-  \fi
-}
-
-% An @enumerate whose labels are integers.  The starting integer is
-% given in \thearg.
-%
-\def\numericenumerate{%
-  \itemno = \thearg
-  \startenumeration{\the\itemno}%
-}
-
-% The starting (lowercase) letter is in \thearg.
-\def\lowercaseenumerate{%
-  \itemno = \expandafter`\thearg
-  \startenumeration{%
-    % Be sure we're not beyond the end of the alphabet.
-    \ifnum\itemno=0
-      \errmessage{No more lowercase letters in @enumerate; get a bigger
-                  alphabet}%
-    \fi
-    \char\lccode\itemno
-  }%
-}
-
-% The starting (uppercase) letter is in \thearg.
-\def\uppercaseenumerate{%
-  \itemno = \expandafter`\thearg
-  \startenumeration{%
-    % Be sure we're not beyond the end of the alphabet.
-    \ifnum\itemno=0
-      \errmessage{No more uppercase letters in @enumerate; get a bigger
-                  alphabet}
-    \fi
-    \char\uccode\itemno
-  }%
-}
-
-% Call \doitemize, adding a period to the first argument and supplying the
-% common last two arguments.  Also subtract one from the initial value in
-% \itemno, since @item increments \itemno.
-%
-\def\startenumeration#1{%
-  \advance\itemno by -1
-  \doitemize{#1.}\flushcr
-}
-
-% @alphaenumerate and @capsenumerate are abbreviations for giving an arg
-% to @enumerate.
-%
-\def\alphaenumerate{\enumerate{a}}
-\def\capsenumerate{\enumerate{A}}
-\def\Ealphaenumerate{\Eenumerate}
-\def\Ecapsenumerate{\Eenumerate}
-
-
-% @multitable macros
-% Amy Hendrickson, 8/18/94, 3/6/96
-%
-% @multitable ... @end multitable will make as many columns as desired.
-% Contents of each column will wrap at width given in preamble.  Width
-% can be specified either with sample text given in a template line,
-% or in percent of \hsize, the current width of text on page.
-
-% Table can continue over pages but will only break between lines.
-
-% To make preamble:
-%
-% Either define widths of columns in terms of percent of \hsize:
-%   @multitable @columnfractions .25 .3 .45
-%   @item ...
-%
-%   Numbers following @columnfractions are the percent of the total
-%   current hsize to be used for each column. You may use as many
-%   columns as desired.
-
-
-% Or use a template:
-%   @multitable {Column 1 template} {Column 2 template} {Column 3 template}
-%   @item ...
-%   using the widest term desired in each column.
-
-% Each new table line starts with @item, each subsequent new column
-% starts with @tab. Empty columns may be produced by supplying @tab's
-% with nothing between them for as many times as empty columns are needed,
-% ie, @tab at tab@tab will produce two empty columns.
-
-% @item, @tab do not need to be on their own lines, but it will not hurt
-% if they are.
-
-% Sample multitable:
-
-%   @multitable {Column 1 template} {Column 2 template} {Column 3 template}
-%   @item first col stuff @tab second col stuff @tab third col
-%   @item
-%   first col stuff
-%   @tab
-%   second col stuff
-%   @tab
-%   third col
-%   @item first col stuff @tab second col stuff
-%   @tab Many paragraphs of text may be used in any column.
-%
-%         They will wrap at the width determined by the template.
-%   @item at tab@tab This will be in third column.
-%   @end multitable
-
-% Default dimensions may be reset by user.
-% @multitableparskip is vertical space between paragraphs in table.
-% @multitableparindent is paragraph indent in table.
-% @multitablecolmargin is horizontal space to be left between columns.
-% @multitablelinespace is space to leave between table items, baseline
-%                                                            to baseline.
-%   0pt means it depends on current normal line spacing.
-%
-\newskip\multitableparskip
-\newskip\multitableparindent
-\newdimen\multitablecolspace
-\newskip\multitablelinespace
-\multitableparskip=0pt
-\multitableparindent=6pt
-\multitablecolspace=12pt
-\multitablelinespace=0pt
-
-% Macros used to set up halign preamble:
-%
-\let\endsetuptable\relax
-\def\xendsetuptable{\endsetuptable}
-\let\columnfractions\relax
-\def\xcolumnfractions{\columnfractions}
-\newif\ifsetpercent
-
-% #1 is the @columnfraction, usually a decimal number like .5, but might
-% be just 1.  We just use it, whatever it is.
-%
-\def\pickupwholefraction#1 {%
-  \global\advance\colcount by 1
-  \expandafter\xdef\csname col\the\colcount\endcsname{#1\hsize}%
-  \setuptable
-}
-
-\newcount\colcount
-\def\setuptable#1{%
-  \def\firstarg{#1}%
-  \ifx\firstarg\xendsetuptable
-    \let\go = \relax
-  \else
-    \ifx\firstarg\xcolumnfractions
-      \global\setpercenttrue
-    \else
-      \ifsetpercent
-         \let\go\pickupwholefraction
-      \else
-         \global\advance\colcount by 1
-         \setbox0=\hbox{#1\unskip\space}% Add a normal word space as a
-                   % separator; typically that is always in the input, anyway.
-         \expandafter\xdef\csname col\the\colcount\endcsname{\the\wd0}%
-      \fi
-    \fi
-    \ifx\go\pickupwholefraction
-      % Put the argument back for the \pickupwholefraction call, so
-      % we'll always have a period there to be parsed.
-      \def\go{\pickupwholefraction#1}%
-    \else
-      \let\go = \setuptable
-    \fi%
-  \fi
-  \go
-}
-
-% multitable-only commands.
-% 
-% @headitem starts a heading row, which we typeset in bold.  Assignments
-% have to be global since we are inside the implicit group of an
-% alignment entry.  \everycr below resets \everytab so we don't have to
-% undo it ourselves.
-\def\headitemfont{\b}% for people to use in the template row; not changeable
-\def\headitem{%
-  \checkenv\multitable
-  \crcr
-  \gdef\headitemcrhook{\nobreak}% attempt to avoid page break after headings
-  \global\everytab={\bf}% can't use \headitemfont since the parsing differs
-  \the\everytab % for the first item
-}%
-%
-% default for tables with no headings.
-\let\headitemcrhook=\relax
-%
-% A \tab used to include \hskip1sp.  But then the space in a template
-% line is not enough.  That is bad.  So let's go back to just `&' until
-% we again encounter the problem the 1sp was intended to solve.
-%					--karl, nathan at acm.org, 20apr99.
-\def\tab{\checkenv\multitable &\the\everytab}%
-
-% @multitable ... @end multitable definitions:
-%
-\newtoks\everytab  % insert after every tab.
-%
-\envdef\multitable{%
-  \vskip\parskip
-  \startsavinginserts
-  %
-  % @item within a multitable starts a normal row.
-  % We use \def instead of \let so that if one of the multitable entries
-  % contains an @itemize, we don't choke on the \item (seen as \crcr aka
-  % \endtemplate) expanding \doitemize.
-  \def\item{\crcr}%
-  %
-  \tolerance=9500
-  \hbadness=9500
-  \setmultitablespacing
-  \parskip=\multitableparskip
-  \parindent=\multitableparindent
-  \overfullrule=0pt
-  \global\colcount=0
-  %
-  \everycr = {%
-    \noalign{%
-      \global\everytab={}% Reset from possible headitem.
-      \global\colcount=0 % Reset the column counter.
-      %
-      % Check for saved footnotes, etc.:
-      \checkinserts
-      %
-      % Perhaps a \nobreak, then reset:
-      \headitemcrhook
-      \global\let\headitemcrhook=\relax
-    }%
-  }%
-  %
-  \parsearg\domultitable
-}
-\def\domultitable#1{%
-  % To parse everything between @multitable and @item:
-  \setuptable#1 \endsetuptable
-  %
-  % This preamble sets up a generic column definition, which will
-  % be used as many times as user calls for columns.
-  % \vtop will set a single line and will also let text wrap and
-  % continue for many paragraphs if desired.
-  \halign\bgroup &%
-    \global\advance\colcount by 1
-    \multistrut
-    \vtop{%
-      % Use the current \colcount to find the correct column width:
-      \hsize=\expandafter\csname col\the\colcount\endcsname
-      %
-      % In order to keep entries from bumping into each other
-      % we will add a \leftskip of \multitablecolspace to all columns after
-      % the first one.
-      %
-      % If a template has been used, we will add \multitablecolspace
-      % to the width of each template entry.
-      %
-      % If the user has set preamble in terms of percent of \hsize we will
-      % use that dimension as the width of the column, and the \leftskip
-      % will keep entries from bumping into each other.  Table will start at
-      % left margin and final column will justify at right margin.
-      %
-      % Make sure we don't inherit \rightskip from the outer environment.
-      \rightskip=0pt
-      \ifnum\colcount=1
-	% The first column will be indented with the surrounding text.
-	\advance\hsize by\leftskip
-      \else
-	\ifsetpercent \else
-	  % If user has not set preamble in terms of percent of \hsize
-	  % we will advance \hsize by \multitablecolspace.
-	  \advance\hsize by \multitablecolspace
-	\fi
-       % In either case we will make \leftskip=\multitablecolspace:
-      \leftskip=\multitablecolspace
-      \fi
-      % Ignoring space at the beginning and end avoids an occasional spurious
-      % blank line, when TeX decides to break the line at the space before the
-      % box from the multistrut, so the strut ends up on a line by itself.
-      % For example:
-      % @multitable @columnfractions .11 .89
-      % @item @code{#}
-      % @tab Legal holiday which is valid in major parts of the whole country.
-      % Is automatically provided with highlighting sequences respectively
-      % marking characters.
-      \noindent\ignorespaces##\unskip\multistrut
-    }\cr
-}
-\def\Emultitable{%
-  \crcr
-  \egroup % end the \halign
-  \global\setpercentfalse
-}
-
-\def\setmultitablespacing{%
-  \def\multistrut{\strut}% just use the standard line spacing
-  %
-  % Compute \multitablelinespace (if not defined by user) for use in
-  % \multitableparskip calculation.  We used define \multistrut based on
-  % this, but (ironically) that caused the spacing to be off.
-  % See bug-texinfo report from Werner Lemberg, 31 Oct 2004 12:52:20 +0100.
-\ifdim\multitablelinespace=0pt
-\setbox0=\vbox{X}\global\multitablelinespace=\the\baselineskip
-\global\advance\multitablelinespace by-\ht0
-\fi
-% Test to see if parskip is larger than space between lines of
-% table. If not, do nothing.
-%        If so, set to same dimension as multitablelinespace.
-\ifdim\multitableparskip>\multitablelinespace
-\global\multitableparskip=\multitablelinespace
-\global\advance\multitableparskip-7pt % to keep parskip somewhat smaller
-                                      % than skip between lines in the table.
-\fi%
-\ifdim\multitableparskip=0pt
-\global\multitableparskip=\multitablelinespace
-\global\advance\multitableparskip-7pt % to keep parskip somewhat smaller
-                                      % than skip between lines in the table.
-\fi}
-
-
-\message{conditionals,}
-
-% @iftex, @ifnotdocbook, @ifnothtml, @ifnotinfo, @ifnotplaintext,
-% @ifnotxml always succeed.  They currently do nothing; we don't
-% attempt to check whether the conditionals are properly nested.  But we
-% have to remember that they are conditionals, so that @end doesn't
-% attempt to close an environment group.
-%
-\def\makecond#1{%
-  \expandafter\let\csname #1\endcsname = \relax
-  \expandafter\let\csname iscond.#1\endcsname = 1
-}
-\makecond{iftex}
-\makecond{ifnotdocbook}
-\makecond{ifnothtml}
-\makecond{ifnotinfo}
-\makecond{ifnotplaintext}
-\makecond{ifnotxml}
-
-% Ignore @ignore, @ifhtml, @ifinfo, and the like.
-%
-\def\direntry{\doignore{direntry}}
-\def\documentdescription{\doignore{documentdescription}}
-\def\docbook{\doignore{docbook}}
-\def\html{\doignore{html}}
-\def\ifdocbook{\doignore{ifdocbook}}
-\def\ifhtml{\doignore{ifhtml}}
-\def\ifinfo{\doignore{ifinfo}}
-\def\ifnottex{\doignore{ifnottex}}
-\def\ifplaintext{\doignore{ifplaintext}}
-\def\ifxml{\doignore{ifxml}}
-\def\ignore{\doignore{ignore}}
-\def\menu{\doignore{menu}}
-\def\xml{\doignore{xml}}
-
-% Ignore text until a line `@end #1', keeping track of nested conditionals.
-%
-% A count to remember the depth of nesting.
-\newcount\doignorecount
-
-\def\doignore#1{\begingroup
-  % Scan in ``verbatim'' mode:
-  \obeylines
-  \catcode`\@ = \other
-  \catcode`\{ = \other
-  \catcode`\} = \other
-  %
-  % Make sure that spaces turn into tokens that match what \doignoretext wants.
-  \spaceisspace
-  %
-  % Count number of #1's that we've seen.
-  \doignorecount = 0
-  %
-  % Swallow text until we reach the matching `@end #1'.
-  \dodoignore{#1}%
-}
-
-{ \catcode`_=11 % We want to use \_STOP_ which cannot appear in texinfo source.
-  \obeylines %
-  %
-  \gdef\dodoignore#1{%
-    % #1 contains the command name as a string, e.g., `ifinfo'.
-    %
-    % Define a command to find the next `@end #1'.
-    \long\def\doignoretext##1^^M at end #1{%
-      \doignoretextyyy##1^^M@#1\_STOP_}%
-    %
-    % And this command to find another #1 command, at the beginning of a
-    % line.  (Otherwise, we would consider a line `@c @ifset', for
-    % example, to count as an @ifset for nesting.)
-    \long\def\doignoretextyyy##1^^M@#1##2\_STOP_{\doignoreyyy{##2}\_STOP_}%
-    %
-    % And now expand that command.
-    \doignoretext ^^M%
-  }%
-}
-
-\def\doignoreyyy#1{%
-  \def\temp{#1}%
-  \ifx\temp\empty			% Nothing found.
-    \let\next\doignoretextzzz
-  \else					% Found a nested condition, ...
-    \advance\doignorecount by 1
-    \let\next\doignoretextyyy		% ..., look for another.
-    % If we're here, #1 ends with ^^M\ifinfo (for example).
-  \fi
-  \next #1% the token \_STOP_ is present just after this macro.
-}
-
-% We have to swallow the remaining "\_STOP_".
-%
-\def\doignoretextzzz#1{%
-  \ifnum\doignorecount = 0	% We have just found the outermost @end.
-    \let\next\enddoignore
-  \else				% Still inside a nested condition.
-    \advance\doignorecount by -1
-    \let\next\doignoretext      % Look for the next @end.
-  \fi
-  \next
-}
-
-% Finish off ignored text.
-{ \obeylines%
-  % Ignore anything after the last `@end #1'; this matters in verbatim
-  % environments, where otherwise the newline after an ignored conditional
-  % would result in a blank line in the output.
-  \gdef\enddoignore#1^^M{\endgroup\ignorespaces}%
-}
-
-
-% @set VAR sets the variable VAR to an empty value.
-% @set VAR REST-OF-LINE sets VAR to the value REST-OF-LINE.
-%
-% Since we want to separate VAR from REST-OF-LINE (which might be
-% empty), we can't just use \parsearg; we have to insert a space of our
-% own to delimit the rest of the line, and then take it out again if we
-% didn't need it.
-% We rely on the fact that \parsearg sets \catcode`\ =10.
-%
-\parseargdef\set{\setyyy#1 \endsetyyy}
-\def\setyyy#1 #2\endsetyyy{%
-  {%
-    \makevalueexpandable
-    \def\temp{#2}%
-    \edef\next{\gdef\makecsname{SET#1}}%
-    \ifx\temp\empty
-      \next{}%
-    \else
-      \setzzz#2\endsetzzz
-    \fi
-  }%
-}
-% Remove the trailing space \setxxx inserted.
-\def\setzzz#1 \endsetzzz{\next{#1}}
-
-% @clear VAR clears (i.e., unsets) the variable VAR.
-%
-\parseargdef\clear{%
-  {%
-    \makevalueexpandable
-    \global\expandafter\let\csname SET#1\endcsname=\relax
-  }%
-}
-
-% @value{foo} gets the text saved in variable foo.
-\def\value{\begingroup\makevalueexpandable\valuexxx}
-\def\valuexxx#1{\expandablevalue{#1}\endgroup}
-{
-  \catcode`\-=\active \catcode`\_=\active
-  %
-  \gdef\makevalueexpandable{%
-    \let\value = \expandablevalue
-    % We don't want these characters active, ...
-    \catcode`\-=\other \catcode`\_=\other
-    % ..., but we might end up with active ones in the argument if
-    % we're called from @code, as @code{@value{foo-bar_}}, though.
-    % So \let them to their normal equivalents.
-    \let-\normaldash \let_\normalunderscore
-  }
-}
-
-\def\expandablevalue#1{%
-  \expandafter\ifx\csname SET#1\endcsname\relax
-    {[No value for ``#1'']}%
-    \message{Variable `#1', used in @value, is not set.}%
-  \else
-    \csname SET#1\endcsname
-  \fi
-}
-
-% Like \expandablevalue, but completely expandable (the \message in the
-% definition above operates at the execution level of TeX).  Used when
-% writing to auxiliary files, due to the expansion that \write does.
-% If flag is undefined, pass through an unexpanded @value command: maybe it 
-% will be set by the time it is read back in.
-%
-% NB flag names containing - or _ may not work here.
-\def\dummyvalue#1{%
-  \expandafter\ifx\csname SET#1\endcsname\relax
-    \noexpand\value{#1}%
-  \else
-    \csname SET#1\endcsname
-  \fi
-}
-
-% Used for @value's in index entries to form the sort key: expand the @value
-% if possible, otherwise sort late.
-\def\indexnofontsvalue#1{%
-  \expandafter\ifx\csname SET#1\endcsname\relax
-    ZZZZZZZ%
-  \else
-    \csname SET#1\endcsname
-  \fi
-}
-
-% @ifset VAR ... @end ifset reads the `...' iff VAR has been defined
-% with @set.
-% 
-% To get the special treatment we need for `@end ifset,' we call
-% \makecond and then redefine.
-%
-\makecond{ifset}
-\def\ifset{\parsearg{\doifset{\let\next=\ifsetfail}}}
-\def\doifset#1#2{%
-  {%
-    \makevalueexpandable
-    \let\next=\empty
-    \expandafter\ifx\csname SET#2\endcsname\relax
-      #1% If not set, redefine \next.
-    \fi
-    \expandafter
-  }\next
-}
-\def\ifsetfail{\doignore{ifset}}
-
-% @ifclear VAR ... @end executes the `...' iff VAR has never been
-% defined with @set, or has been undefined with @clear.
-%
-% The `\else' inside the `\doifset' parameter is a trick to reuse the
-% above code: if the variable is not set, do nothing, if it is set,
-% then redefine \next to \ifclearfail.
-%
-\makecond{ifclear}
-\def\ifclear{\parsearg{\doifset{\else \let\next=\ifclearfail}}}
-\def\ifclearfail{\doignore{ifclear}}
-
-% @ifcommandisdefined CMD ... @end executes the `...' if CMD (written
-% without the @) is in fact defined.  We can only feasibly check at the
-% TeX level, so something like `mathcode' is going to considered
-% defined even though it is not a Texinfo command.
-% 
-\makecond{ifcommanddefined}
-\def\ifcommanddefined{\parsearg{\doifcmddefined{\let\next=\ifcmddefinedfail}}}
-%
-\def\doifcmddefined#1#2{{%
-    \makevalueexpandable
-    \let\next=\empty
-    \expandafter\ifx\csname #2\endcsname\relax
-      #1% If not defined, \let\next as above.
-    \fi
-    \expandafter
-  }\next
-}
-\def\ifcmddefinedfail{\doignore{ifcommanddefined}}
-
-% @ifcommandnotdefined CMD ... handled similar to @ifclear above.
-\makecond{ifcommandnotdefined}
-\def\ifcommandnotdefined{%
-  \parsearg{\doifcmddefined{\else \let\next=\ifcmdnotdefinedfail}}}
-\def\ifcmdnotdefinedfail{\doignore{ifcommandnotdefined}}
-
-% Set the `txicommandconditionals' variable, so documents have a way to
-% test if the @ifcommand...defined conditionals are available.
-\set txicommandconditionals
-
-% @dircategory CATEGORY  -- specify a category of the dir file
-% which this file should belong to.  Ignore this in TeX.
-\let\dircategory=\comment
-
-% @defininfoenclose.
-\let\definfoenclose=\comment
-
-
-\message{indexing,}
-% Index generation facilities
-
-% Define \newwrite to be identical to plain tex's \newwrite
-% except not \outer, so it can be used within macros and \if's.
-\edef\newwrite{\makecsname{ptexnewwrite}}
-
-% \newindex {foo} defines an index named IX.
-% It automatically defines \IXindex such that
-% \IXindex ...rest of line... puts an entry in the index IX.
-% It also defines \IXindfile to be the number of the output channel for
-% the file that accumulates this index.  The file's extension is IX.
-% The name of an index should be no more than 2 characters long
-% for the sake of vms.
-%
-\def\newindex#1{%
-  \expandafter\chardef\csname#1indfile\endcsname=0
-  \expandafter\xdef\csname#1index\endcsname{%     % Define @#1index
-    \noexpand\doindex{#1}}
-}
-
-% @defindex foo  ==  \newindex{foo}
-%
-\def\defindex{\parsearg\newindex}
-
-% Define @defcodeindex, like @defindex except put all entries in @code.
-%
-\def\defcodeindex{\parsearg\newcodeindex}
-%
-\def\newcodeindex#1{%
-  \expandafter\chardef\csname#1indfile\endcsname=0
-  \expandafter\xdef\csname#1index\endcsname{%
-    \noexpand\docodeindex{#1}}%
-}
-
-% The default indices:
-\newindex{cp}%      concepts,
-\newcodeindex{fn}%  functions,
-\newcodeindex{vr}%  variables,
-\newcodeindex{tp}%  types,
-\newcodeindex{ky}%  keys
-\newcodeindex{pg}%  and programs.
-
-
-% @synindex foo bar    makes index foo feed into index bar.
-% Do this instead of @defindex foo if you don't want it as a separate index.
-%
-% @syncodeindex foo bar   similar, but put all entries made for index foo
-% inside @code.
-%
-\def\synindex#1 #2 {\dosynindex\doindex{#1}{#2}}
-\def\syncodeindex#1 #2 {\dosynindex\docodeindex{#1}{#2}}
-
-% #1 is \doindex or \docodeindex, #2 the index getting redefined (foo),
-% #3 the target index (bar).
-\def\dosynindex#1#2#3{%
-  \requireopenindexfile{#3}%
-  % redefine \fooindfile:
-  \expandafter\let\expandafter\temp\expandafter=\csname#3indfile\endcsname
-  \expandafter\let\csname#2indfile\endcsname=\temp
-  % redefine \fooindex:
-  \expandafter\xdef\csname#2index\endcsname{\noexpand#1{#3}}%
-}
-
-% Define \doindex, the driver for all index macros.
-% Argument #1 is generated by the calling \fooindex macro,
-% and it is the two-letter name of the index.
-
-\def\doindex#1{\edef\indexname{#1}\parsearg\doindexxxx}
-\def\doindexxxx #1{\doind{\indexname}{#1}}
-
-% like the previous two, but they put @code around the argument.
-\def\docodeindex#1{\edef\indexname{#1}\parsearg\docodeindexxxx}
-\def\docodeindexxxx #1{\doind{\indexname}{\code{#1}}}
-
-

-% Used for the aux, toc and index files to prevent expansion of Texinfo 
-% commands.
-%
-\def\atdummies{%
-  \definedummyletter\@%
-  \definedummyletter\ %
-  \definedummyletter\{%
-  \definedummyletter\}%
-  %
-  % Do the redefinitions.
-  \definedummies
-  \otherbackslash
-}
-
-% \definedummyword defines \#1 as \string\#1\space, thus effectively
-% preventing its expansion.  This is used only for control words,
-% not control letters, because the \space would be incorrect for
-% control characters, but is needed to separate the control word
-% from whatever follows.
-%
-% These can be used both for control words that take an argument and
-% those that do not.  If it is followed by {arg} in the input, then
-% that will dutifully get written to the index (or wherever).
-%
-% For control letters, we have \definedummyletter, which omits the
-% space.
-%
-\def\definedummyword  #1{\def#1{\string#1\space}}%
-\def\definedummyletter#1{\def#1{\string#1}}%
-\let\definedummyaccent\definedummyletter
-
-% Called from \atdummies to prevent the expansion of commands.
-%
-\def\definedummies{%
-  %
-  \let\commondummyword\definedummyword
-  \let\commondummyletter\definedummyletter
-  \let\commondummyaccent\definedummyaccent
-  \commondummiesnofonts
-  %
-  \definedummyletter\_%
-  \definedummyletter\-%
-  %
-  % Non-English letters.
-  \definedummyword\AA
-  \definedummyword\AE
-  \definedummyword\DH
-  \definedummyword\L
-  \definedummyword\O
-  \definedummyword\OE
-  \definedummyword\TH
-  \definedummyword\aa
-  \definedummyword\ae
-  \definedummyword\dh
-  \definedummyword\exclamdown
-  \definedummyword\l
-  \definedummyword\o
-  \definedummyword\oe
-  \definedummyword\ordf
-  \definedummyword\ordm
-  \definedummyword\questiondown
-  \definedummyword\ss
-  \definedummyword\th
-  %
-  % Although these internal commands shouldn't show up, sometimes they do.
-  \definedummyword\bf
-  \definedummyword\gtr
-  \definedummyword\hat
-  \definedummyword\less
-  \definedummyword\sf
-  \definedummyword\sl
-  \definedummyword\tclose
-  \definedummyword\tt
-  %
-  \definedummyword\LaTeX
-  \definedummyword\TeX
-  %
-  % Assorted special characters.
-  \definedummyword\atchar
-  \definedummyword\arrow
-  \definedummyword\backslashchar
-  \definedummyword\bullet
-  \definedummyword\comma
-  \definedummyword\copyright
-  \definedummyword\registeredsymbol
-  \definedummyword\dots
-  \definedummyword\enddots
-  \definedummyword\entrybreak
-  \definedummyword\equiv
-  \definedummyword\error
-  \definedummyword\euro
-  \definedummyword\expansion
-  \definedummyword\geq
-  \definedummyword\guillemetleft
-  \definedummyword\guillemetright
-  \definedummyword\guilsinglleft
-  \definedummyword\guilsinglright
-  \definedummyword\lbracechar
-  \definedummyword\leq
-  \definedummyword\mathopsup
-  \definedummyword\minus
-  \definedummyword\ogonek
-  \definedummyword\pounds
-  \definedummyword\point
-  \definedummyword\print
-  \definedummyword\quotedblbase
-  \definedummyword\quotedblleft
-  \definedummyword\quotedblright
-  \definedummyword\quoteleft
-  \definedummyword\quoteright
-  \definedummyword\quotesinglbase
-  \definedummyword\rbracechar
-  \definedummyword\result
-  \definedummyword\sub
-  \definedummyword\sup
-  \definedummyword\textdegree
-  %
-  \definedummyword\subentry
-  %
-  % We want to disable all macros so that they are not expanded by \write.
-  \macrolist
-  \let\value\dummyvalue
-  %
-  \normalturnoffactive
-}
-
-% \commondummiesnofonts: common to \definedummies and \indexnofonts.
-% Define \commondummyletter, \commondummyaccent and \commondummyword before
-% using.  Used for accents, font commands, and various control letters.
-%
-\def\commondummiesnofonts{%
-  % Control letters and accents.
-  \commondummyletter\!%
-  \commondummyaccent\"%
-  \commondummyaccent\'%
-  \commondummyletter\*%
-  \commondummyaccent\,%
-  \commondummyletter\.%
-  \commondummyletter\/%
-  \commondummyletter\:%
-  \commondummyaccent\=%
-  \commondummyletter\?%
-  \commondummyaccent\^%
-  \commondummyaccent\`%
-  \commondummyaccent\~%
-  \commondummyword\u
-  \commondummyword\v
-  \commondummyword\H
-  \commondummyword\dotaccent
-  \commondummyword\ogonek
-  \commondummyword\ringaccent
-  \commondummyword\tieaccent
-  \commondummyword\ubaraccent
-  \commondummyword\udotaccent
-  \commondummyword\dotless
-  %
-  % Texinfo font commands.
-  \commondummyword\b
-  \commondummyword\i
-  \commondummyword\r
-  \commondummyword\sansserif
-  \commondummyword\sc
-  \commondummyword\slanted
-  \commondummyword\t
-  %
-  % Commands that take arguments.
-  \commondummyword\abbr
-  \commondummyword\acronym
-  \commondummyword\anchor
-  \commondummyword\cite
-  \commondummyword\code
-  \commondummyword\command
-  \commondummyword\dfn
-  \commondummyword\dmn
-  \commondummyword\email
-  \commondummyword\emph
-  \commondummyword\env
-  \commondummyword\file
-  \commondummyword\image
-  \commondummyword\indicateurl
-  \commondummyword\inforef
-  \commondummyword\kbd
-  \commondummyword\key
-  \commondummyword\math
-  \commondummyword\option
-  \commondummyword\pxref
-  \commondummyword\ref
-  \commondummyword\samp
-  \commondummyword\strong
-  \commondummyword\tie
-  \commondummyword\U
-  \commondummyword\uref
-  \commondummyword\url
-  \commondummyword\var
-  \commondummyword\verb
-  \commondummyword\w
-  \commondummyword\xref
-}
-
-\let\indexlbrace\relax
-\let\indexrbrace\relax
-\let\indexatchar\relax
-\let\indexbackslash\relax
-
-{\catcode`\@=0
-\catcode`\\=13
-  @gdef at backslashdisappear{@def\{}}
-}
-
-{
-\catcode`\<=13
-\catcode`\-=13
-\catcode`\`=13
-  \gdef\indexnonalnumdisappear{%
-    \expandafter\ifx\csname SETtxiindexlquoteignore\endcsname\relax\else
-      % @set txiindexlquoteignore makes us ignore left quotes in the sort term.
-      % (Introduced for FSFS 2nd ed.)
-      \let`=\empty
-    \fi
-    %
-    \expandafter\ifx\csname SETtxiindexbackslashignore\endcsname\relax\else
-      \backslashdisappear
-    \fi
-    %
-    \expandafter\ifx\csname SETtxiindexhyphenignore\endcsname\relax\else
-      \def-{}%
-    \fi
-    \expandafter\ifx\csname SETtxiindexlessthanignore\endcsname\relax\else
-      \def<{}%
-    \fi
-    \expandafter\ifx\csname SETtxiindexatsignignore\endcsname\relax\else
-      \def\@{}%
-    \fi
-  }
-
-  \gdef\indexnonalnumreappear{%
-    \let-\normaldash
-    \let<\normalless
-  }
-}
-
-
-% \indexnofonts is used when outputting the strings to sort the index
-% by, and when constructing control sequence names.  It eliminates all
-% control sequences and just writes whatever the best ASCII sort string
-% would be for a given command (usually its argument).
-%
-\def\indexnofonts{%
-  % Accent commands should become @asis.
-  \def\commondummyaccent##1{\let##1\asis}%
-  % We can just ignore other control letters.
-  \def\commondummyletter##1{\let##1\empty}%
-  % All control words become @asis by default; overrides below.
-  \let\commondummyword\commondummyaccent
-  \commondummiesnofonts
-  %
-  % Don't no-op \tt, since it isn't a user-level command
-  % and is used in the definitions of the active chars like <, >, |, etc.
-  % Likewise with the other plain tex font commands.
-  %\let\tt=\asis
-  %
-  \def\ { }%
-  \def\@{@}%
-  \def\_{\normalunderscore}%
-  \def\-{}% @- shouldn't affect sorting
-  %
-  \uccode`\1=`\{ \uppercase{\def\{{1}}%
-  \uccode`\1=`\} \uppercase{\def\}{1}}%
-  \let\lbracechar\{%
-  \let\rbracechar\}%
-  %
-  % Non-English letters.
-  \def\AA{AA}%
-  \def\AE{AE}%
-  \def\DH{DZZ}%
-  \def\L{L}%
-  \def\OE{OE}%
-  \def\O{O}%
-  \def\TH{TH}%
-  \def\aa{aa}%
-  \def\ae{ae}%
-  \def\dh{dzz}%
-  \def\exclamdown{!}%
-  \def\l{l}%
-  \def\oe{oe}%
-  \def\ordf{a}%
-  \def\ordm{o}%
-  \def\o{o}%
-  \def\questiondown{?}%
-  \def\ss{ss}%
-  \def\th{th}%
-  %
-  \def\LaTeX{LaTeX}%
-  \def\TeX{TeX}%
-  %
-  % Assorted special characters.  \defglyph gives the control sequence a
-  % definition that removes the {} that follows its use.
-  \defglyph\atchar{@}%
-  \defglyph\arrow{->}%
-  \defglyph\bullet{bullet}%
-  \defglyph\comma{,}%
-  \defglyph\copyright{copyright}%
-  \defglyph\dots{...}%
-  \defglyph\enddots{...}%
-  \defglyph\equiv{==}%
-  \defglyph\error{error}%
-  \defglyph\euro{euro}%
-  \defglyph\expansion{==>}%
-  \defglyph\geq{>=}%
-  \defglyph\guillemetleft{<<}%
-  \defglyph\guillemetright{>>}%
-  \defglyph\guilsinglleft{<}%
-  \defglyph\guilsinglright{>}%
-  \defglyph\leq{<=}%
-  \defglyph\lbracechar{\{}%
-  \defglyph\minus{-}%
-  \defglyph\point{.}%
-  \defglyph\pounds{pounds}%
-  \defglyph\print{-|}%
-  \defglyph\quotedblbase{"}%
-  \defglyph\quotedblleft{"}%
-  \defglyph\quotedblright{"}%
-  \defglyph\quoteleft{`}%
-  \defglyph\quoteright{'}%
-  \defglyph\quotesinglbase{,}%
-  \defglyph\rbracechar{\}}%
-  \defglyph\registeredsymbol{R}%
-  \defglyph\result{=>}%
-  \defglyph\textdegree{o}%
-  %
-  % We need to get rid of all macros, leaving only the arguments (if present).
-  % Of course this is not nearly correct, but it is the best we can do for now.
-  % makeinfo does not expand macros in the argument to @deffn, which ends up
-  % writing an index entry, and texindex isn't prepared for an index sort entry
-  % that starts with \.
-  %
-  % Since macro invocations are followed by braces, we can just redefine them
-  % to take a single TeX argument.  The case of a macro invocation that
-  % goes to end-of-line is not handled.
-  %
-  \macrolist
-  \let\value\indexnofontsvalue
-}
-\def\defglyph#1#2{\def#1##1{#2}} % see above
-
-

-
-
-% #1 is the index name, #2 is the entry text.
-\def\doind#1#2{%
-  \iflinks
-  {%
-    %
-    \requireopenindexfile{#1}%
-    \edef\writeto{\csname#1indfile\endcsname}%
-    %
-    \def\indextext{#2}%
-    \safewhatsit\doindwrite
-  }%
-  \fi
-}
-
-% Check if an index file has been opened, and if not, open it.
-\def\requireopenindexfile#1{%
-\ifnum\csname #1indfile\endcsname=0
-  \expandafter\newwrite \csname#1indfile\endcsname
-  \edef\suffix{#1}%
-  % A .fls suffix would conflict with the file extension for the output
-  % of -recorder, so use .f1s instead.
-  \ifx\suffix\indexisfl\def\suffix{f1}\fi
-  % Open the file
-  \immediate\openout\csname#1indfile\endcsname \jobname.\suffix
-  % Using \immediate above here prevents an object entering into the current 
-  % box, which could confound checks such as those in \safewhatsit for
-  % preceding skips.
-  \typeout{Writing index file \jobname.\suffix}%
-\fi}
-\def\indexisfl{fl}
-
-% Definition for writing index entry sort key.
-{
-\catcode`\-=13
-\gdef\indexwritesortas{%
-  \begingroup
-  \indexnonalnumreappear
-  \indexwritesortasxxx}
-\gdef\indexwritesortasxxx#1{%
-  \xdef\indexsortkey{#1}\endgroup}
-}
-
-\def\indexwriteseealso#1{
-  \gdef\pagenumbertext{\string\seealso{#1}}%
-}
-\def\indexwriteseeentry#1{
-  \gdef\pagenumbertext{\string\seeentry{#1}}%
-}
-
-% The default definitions
-\def\sortas#1{}%
-\def\seealso#1{\i{\putwordSeeAlso}\ #1}% for sorted index file only
-\def\putwordSeeAlso{See also}
-\def\seeentry#1{\i{\putwordSee}\ #1}% for sorted index file only
-
-
-% Given index entry text like "aaa @subentry bbb @sortas{ZZZ}":
-%   * Set \bracedtext to "{aaa}{bbb}"
-%   * Set \fullindexsortkey to "aaa @subentry ZZZ"
-%   * If @seealso occurs, set \pagenumbertext
-%
-\def\splitindexentry#1{%
-  \gdef\fullindexsortkey{}%
-  \xdef\bracedtext{}%
-  \def\sep{}%
-  \def\seealso##1{}%
-  \def\seeentry##1{}%
-  \expandafter\doindexsegment#1\subentry\finish\subentry
-}
-
-% append the results from the next segment
-\def\doindexsegment#1\subentry{%
-  \def\segment{#1}%
-  \ifx\segment\isfinish
-  \else
-    %
-    % Fully expand the segment, throwing away any @sortas directives, and 
-    % trim spaces.
-    \edef\trimmed{\segment}%
-    \edef\trimmed{\expandafter\eatspaces\expandafter{\trimmed}}%
-    %
-    \xdef\bracedtext{\bracedtext{\trimmed}}%
-    %
-    % Get the string to sort by.  Process the segment with all
-    % font commands turned off.
-    \bgroup
-      \let\sortas\indexwritesortas
-      \let\seealso\indexwriteseealso
-      \let\seeentry\indexwriteseeentry
-      \indexnofonts
-      % The braces around the commands are recognized by texindex.
-      \def\lbracechar{{\string\indexlbrace}}%
-      \def\rbracechar{{\string\indexrbrace}}%
-      \let\{=\lbracechar
-      \let\}=\rbracechar
-      \def\@{{\string\indexatchar}}%
-      \def\atchar##1{\@}%
-      \def\backslashchar{{\string\indexbackslash}}%
-      \uccode`\~=`\\ \uppercase{\let~\backslashchar}%
-      %
-      \let\indexsortkey\empty
-      \global\let\pagenumbertext\empty
-      % Execute the segment and throw away the typeset output.  This executes
-      % any @sortas or @seealso commands in this segment.
-      \setbox\dummybox = \hbox{\segment}%
-      \ifx\indexsortkey\empty{%
-        \indexnonalnumdisappear
-        \xdef\trimmed{\segment}%
-        \xdef\trimmed{\expandafter\eatspaces\expandafter{\trimmed}}%
-        \xdef\indexsortkey{\trimmed}%
-        \ifx\indexsortkey\empty\xdef\indexsortkey{ }\fi
-      }\fi
-      %
-      % Append to \fullindexsortkey.
-      \edef\tmp{\gdef\noexpand\fullindexsortkey{%
-                  \fullindexsortkey\sep\indexsortkey}}%
-      \tmp
-    \egroup
-    \def\sep{\subentry}%
-    %
-    \expandafter\doindexsegment
-  \fi
-}
-\def\isfinish{\finish}%
-\newbox\dummybox % used above
-
-\let\subentry\relax
-
-% Use \ instead of @ in index files.  To support old texi2dvi and texindex.
-% This works without changing the escape character used in the toc or aux
-% files because the index entries are fully expanded here, and \string uses
-% the current value of \escapechar.
-\def\escapeisbackslash{\escapechar=`\\}
-
-% Use \ in index files by default.  texi2dvi didn't support @ as as the escape 
-% character (as it checked for "\entry" in the files, and not "@entry").  When 
-% the new version of texi2dvi has had a chance to become more prevalent, then 
-% the escape character can change back to @ again.  This should be an easy 
-% change to make now because both @ and \ are only used as escape characters in 
-% index files, never standing for themselves. 
-%
-\set txiindexescapeisbackslash
-
-% Write the entry in \indextext to the index file.
-%
-\def\doindwrite{%
-  \maybemarginindex
-  %
-  \atdummies
-  %
-  \expandafter\ifx\csname SETtxiindexescapeisbackslash\endcsname\relax\else
-    \escapeisbackslash
-  \fi
-  %
-  % For texindex which always views { and } as separators.
-  \def\{{\lbracechar{}}%
-  \def\}{\rbracechar{}}%
-  \uccode`\~=`\\ \uppercase{\def~{\backslashchar{}}}%
-  %
-  % Split the entry into primary entry and any subentries, and get the index 
-  % sort key.
-  \splitindexentry\indextext
-  %
-  % Set up the complete index entry, with both the sort key and
-  % the original text, including any font commands.  We write
-  % three arguments to \entry to the .?? file (four in the
-  % subentry case), texindex reduces to two when writing the .??s
-  % sorted result.
-  %
-  \edef\temp{%
-    \write\writeto{%
-      \string\entry{\fullindexsortkey}%
-        {\ifx\pagenumbertext\empty\noexpand\folio\else\pagenumbertext\fi}%
-        \bracedtext}%
-  }%
-  \temp
-}
-
-% Put the index entry in the margin if desired (undocumented).
-\def\maybemarginindex{%
-  \ifx\SETmarginindex\relax\else
-    \insert\margin{\hbox{\vrule height8pt depth3pt width0pt \relax\indextext}}%
-  \fi
-}
-\let\SETmarginindex=\relax
-
-
-% Take care of unwanted page breaks/skips around a whatsit:
-%
-% If a skip is the last thing on the list now, preserve it
-% by backing up by \lastskip, doing the \write, then inserting
-% the skip again.  Otherwise, the whatsit generated by the
-% \write or \pdfdest will make \lastskip zero.  The result is that
-% sequences like this:
-% @end defun
-% @tindex whatever
-% @defun ...
-% will have extra space inserted, because the \medbreak in the
-% start of the @defun won't see the skip inserted by the @end of
-% the previous defun.
-%
-% But don't do any of this if we're not in vertical mode.  We
-% don't want to do a \vskip and prematurely end a paragraph.
-%
-% Avoid page breaks due to these extra skips, too.
-%
-% But wait, there is a catch there:
-% We'll have to check whether \lastskip is zero skip.  \ifdim is not
-% sufficient for this purpose, as it ignores stretch and shrink parts
-% of the skip.  The only way seems to be to check the textual
-% representation of the skip.
-%
-% The following is almost like \def\zeroskipmacro{0.0pt} except that
-% the ``p'' and ``t'' characters have catcode \other, not 11 (letter).
-%
-\edef\zeroskipmacro{\expandafter\the\csname z at skip\endcsname}
-%
-\newskip\whatsitskip
-\newcount\whatsitpenalty
-%
-% ..., ready, GO:
-%
-\def\safewhatsit#1{\ifhmode
-  #1%
- \else
-  % \lastskip and \lastpenalty cannot both be nonzero simultaneously.
-  \whatsitskip = \lastskip
-  \edef\lastskipmacro{\the\lastskip}%
-  \whatsitpenalty = \lastpenalty
-  %
-  % If \lastskip is nonzero, that means the last item was a
-  % skip.  And since a skip is discardable, that means this
-  % -\whatsitskip glue we're inserting is preceded by a
-  % non-discardable item, therefore it is not a potential
-  % breakpoint, therefore no \nobreak needed.
-  \ifx\lastskipmacro\zeroskipmacro
-  \else
-    \vskip-\whatsitskip
-  \fi
-  %
-  #1%
-  %
-  \ifx\lastskipmacro\zeroskipmacro
-    % If \lastskip was zero, perhaps the last item was a penalty, and
-    % perhaps it was >=10000, e.g., a \nobreak.  In that case, we want
-    % to re-insert the same penalty (values >10000 are used for various
-    % signals); since we just inserted a non-discardable item, any
-    % following glue (such as a \parskip) would be a breakpoint.  For example:
-    %   @deffn deffn-whatever
-    %   @vindex index-whatever
-    %   Description.
-    % would allow a break between the index-whatever whatsit
-    % and the "Description." paragraph.
-    \ifnum\whatsitpenalty>9999 \penalty\whatsitpenalty \fi
-  \else
-    % On the other hand, if we had a nonzero \lastskip,
-    % this make-up glue would be preceded by a non-discardable item
-    % (the whatsit from the \write), so we must insert a \nobreak.
-    \nobreak\vskip\whatsitskip
-  \fi
-\fi}
-
-% The index entry written in the file actually looks like
-%  \entry {sortstring}{page}{topic}
-% or
-%  \entry {sortstring}{page}{topic}{subtopic}
-% The texindex program reads in these files and writes files
-% containing these kinds of lines:
-%  \initial {c}
-%     before the first topic whose initial is c
-%  \entry {topic}{pagelist}
-%     for a topic that is used without subtopics
-%  \primary {topic}
-%  \entry {topic}{}
-%     for the beginning of a topic that is used with subtopics
-%  \secondary {subtopic}{pagelist}
-%     for each subtopic.
-%  \secondary {subtopic}{}
-%     for a subtopic with sub-subtopics
-%  \tertiary {subtopic}{subsubtopic}{pagelist}
-%     for each sub-subtopic.
-
-% Define the user-accessible indexing commands
-% @findex, @vindex, @kindex, @cindex.
-
-\def\findex {\fnindex}
-\def\kindex {\kyindex}
-\def\cindex {\cpindex}
-\def\vindex {\vrindex}
-\def\tindex {\tpindex}
-\def\pindex {\pgindex}
-
-% Define the macros used in formatting output of the sorted index material.
-
-% @printindex causes a particular index (the ??s file) to get printed.
-% It does not print any chapter heading (usually an @unnumbered).
-%
-\parseargdef\printindex{\begingroup
-  \dobreak \chapheadingskip{10000}%
-  %
-  \smallfonts \rm
-  \tolerance = 9500
-  \plainfrenchspacing
-  \everypar = {}% don't want the \kern\-parindent from indentation suppression.
-  %
-  % See comment in \requireopenindexfile.
-  \def\indexname{#1}\ifx\indexname\indexisfl\def\indexname{f1}\fi
-  %
-  % See if the index file exists and is nonempty.
-  \openin 1 \jobname.\indexname s
-  \ifeof 1
-    % \enddoublecolumns gets confused if there is no text in the index,
-    % and it loses the chapter title and the aux file entries for the
-    % index.  The easiest way to prevent this problem is to make sure
-    % there is some text.
-    \putwordIndexNonexistent
-    \typeout{No file \jobname.\indexname s.}%
-  \else
-    % If the index file exists but is empty, then \openin leaves \ifeof
-    % false.  We have to make TeX try to read something from the file, so
-    % it can discover if there is anything in it.
-    \read 1 to \thisline
-    \ifeof 1
-      \putwordIndexIsEmpty
-    \else
-      \expandafter\printindexzz\thisline\relax\relax\finish%
-    \fi
-  \fi
-  \closein 1
-\endgroup}
-
-% If the index file starts with a backslash, forgo reading the index
-% file altogether.  If somebody upgrades texinfo.tex they may still have
-% old index files using \ as the escape character.  Reading this would
-% at best lead to typesetting garbage, at worst a TeX syntax error.
-\def\printindexzz#1#2\finish{%
-  \expandafter\ifx\csname SETtxiindexescapeisbackslash\endcsname\relax
-    \uccode`\~=`\\ \uppercase{\if\noexpand~}\noexpand#1
-      \expandafter\ifx\csname SETtxiskipindexfileswithbackslash\endcsname\relax
-\errmessage{%
-ERROR: A sorted index file in an obsolete format was skipped.  
-To fix this problem, please upgrade your version of 'texi2dvi'
-or 'texi2pdf' to that at <https://ftp.gnu.org/gnu/texinfo>.
-If you are using an old version of 'texindex' (part of the Texinfo 
-distribution), you may also need to upgrade to a newer version (at least 6.0).
-You may be able to typeset the index if you run
-'texindex \jobname.\indexname' yourself.
-You could also try setting the 'txiindexescapeisbackslash' flag by 
-running a command like
-'texi2dvi -t "@set txiindexescapeisbackslash" \jobname.texi'.  If you do 
-this, Texinfo will try to use index files in the old format.
-If you continue to have problems, deleting the index files and starting again 
-might help (with 'rm \jobname.?? \jobname.??s')%
-}%
-      \else
-        (Skipped sorted index file in obsolete format)
-      \fi
-    \else
-      \begindoublecolumns
-      \input \jobname.\indexname s
-      \enddoublecolumns
-    \fi
-  \else
-    \message{trying to print index \indexname}%
-    \begindoublecolumns
-    \catcode`\\=0\relax
-    \catcode`\@=12\relax
-    \input \jobname.\indexname s
-    \enddoublecolumns
-  \fi
-}
-
-% These macros are used by the sorted index file itself.
-% Change them to control the appearance of the index.
-
-{\catcode`\/=13 \catcode`\-=13 \catcode`\^=13 \catcode`\~=13 \catcode`\_=13
-\catcode`\|=13 \catcode`\<=13 \catcode`\>=13 \catcode`\+=13 \catcode`\"=13
-\catcode`\$=3
-\gdef\initialglyphs{%
-  % special control sequences used in the index sort key
-  \let\indexlbrace\{%
-  \let\indexrbrace\}%
-  \let\indexatchar\@%
-  \def\indexbackslash{\math{\backslash}}%
-  %
-  % Some changes for non-alphabetic characters.  Using the glyphs from the
-  % math fonts looks more consistent than the typewriter font used elsewhere
-  % for these characters.
-  \uccode`\~=`\\ \uppercase{\def~{\math{\backslash}}}
-  %
-  % In case @\ is used for backslash
-  \uppercase{\let\\=~}
-  % Can't get bold backslash so don't use bold forward slash
-  \catcode`\/=13
-  \def/{{\secrmnotbold \normalslash}}%
-  \def-{{\normaldash\normaldash}}% en dash `--'
-  \def^{{\chapbf \normalcaret}}%
-  \def~{{\chapbf \normaltilde}}%
-  \def\_{%
-     \leavevmode \kern.07em \vbox{\hrule width.3em height.1ex}\kern .07em }%
-  \def|{$\vert$}%
-  \def<{$\less$}%
-  \def>{$\gtr$}%
-  \def+{$\normalplus$}%
-}}
-
-\def\initial{%
-  \bgroup
-  \initialglyphs
-  \initialx
-}
-
-\def\initialx#1{%
-  % Remove any glue we may have, we'll be inserting our own.
-  \removelastskip
-  %
-  % We like breaks before the index initials, so insert a bonus.
-  % The glue before the bonus allows a little bit of space at the
-  % bottom of a column to reduce an increase in inter-line spacing.
-  \nobreak
-  \vskip 0pt plus 5\baselineskip
-  \penalty -300 
-  \vskip 0pt plus -5\baselineskip
-  %
-  % Typeset the initial.  Making this add up to a whole number of
-  % baselineskips increases the chance of the dots lining up from column
-  % to column.  It still won't often be perfect, because of the stretch
-  % we need before each entry, but it's better.
-  %
-  % No shrink because it confuses \balancecolumns.
-  \vskip 1.67\baselineskip plus 1\baselineskip
-  \leftline{\secfonts \kern-0.05em \secbf #1}%
-  % \secfonts is inside the argument of \leftline so that the change of
-  % \baselineskip will not affect any glue inserted before the vbox that
-  % \leftline creates.
-  % Do our best not to break after the initial.
-  \nobreak
-  \vskip .33\baselineskip plus .1\baselineskip
-  \egroup % \initialglyphs
-}
-
-\newdimen\entryrightmargin
-\entryrightmargin=0pt
-
-% \entry typesets a paragraph consisting of the text (#1), dot leaders, and
-% then page number (#2) flushed to the right margin.  It is used for index
-% and table of contents entries.  The paragraph is indented by \leftskip.
-%
-\def\entry{%
-  \begingroup
-    %
-    % Start a new paragraph if necessary, so our assignments below can't
-    % affect previous text.
-    \par
-    %
-    % No extra space above this paragraph.
-    \parskip = 0in
-    %
-    % When reading the text of entry, convert explicit line breaks
-    % from @* into spaces.  The user might give these in long section
-    % titles, for instance.
-    \def\*{\unskip\space\ignorespaces}%
-    \def\entrybreak{\hfil\break}% An undocumented command
-    %
-    % Swallow the left brace of the text (first parameter):
-    \afterassignment\doentry
-    \let\temp =
-}
-\def\entrybreak{\unskip\space\ignorespaces}%
-\def\doentry{%
-    % Save the text of the entry
-    \global\setbox\boxA=\hbox\bgroup
-    \bgroup % Instead of the swallowed brace.
-      \noindent
-      \aftergroup\finishentry
-      % And now comes the text of the entry.
-      % Not absorbing as a macro argument reduces the chance of problems
-      % with catcodes occurring.
-}
-{\catcode`\@=11
-\gdef\finishentry#1{%
-    \egroup % end box A
-    \dimen@ = \wd\boxA % Length of text of entry
-    \global\setbox\boxA=\hbox\bgroup
-      \unhbox\boxA
-      % #1 is the page number.
-      %
-      % Get the width of the page numbers, and only use
-      % leaders if they are present.
-      \global\setbox\boxB = \hbox{#1}%
-      \ifdim\wd\boxB = 0pt
-        \null\nobreak\hfill\ %
-      \else
-        %
-        \null\nobreak\indexdotfill % Have leaders before the page number.
-        %
-        \ifpdforxetex
-          \pdfgettoks#1.%
-          \hskip\skip\thinshrinkable\the\toksA
-        \else
-          \hskip\skip\thinshrinkable #1%
-        \fi
-      \fi
-    \egroup % end \boxA
-    \ifdim\wd\boxB = 0pt
-      \noindent\unhbox\boxA\par
-      \nobreak
-    \else\bgroup
-      % We want the text of the entries to be aligned to the left, and the
-      % page numbers to be aligned to the right.
-      %
-      \parindent = 0pt
-      \advance\leftskip by 0pt plus 1fil
-      \advance\leftskip by 0pt plus -1fill
-      \rightskip = 0pt plus -1fil
-      \advance\rightskip by 0pt plus 1fill
-      % Cause last line, which could consist of page numbers on their own
-      % if the list of page numbers is long, to be aligned to the right.
-      \parfillskip=0pt plus -1fill
-      %
-      \advance\rightskip by \entryrightmargin
-      % Determine how far we can stretch into the margin.
-      % This allows, e.g., "Appendix H  GNU Free Documentation License" to
-      % fit on one line in @letterpaper format.
-      \ifdim\entryrightmargin>2.1em
-        \dimen at i=2.1em
-      \else
-        \dimen at i=0em
-      \fi
-      \advance \parfillskip by 0pt minus 1\dimen at i
-      %
-      \dimen at ii = \hsize
-      \advance\dimen at ii by -1\leftskip
-      \advance\dimen at ii by -1\entryrightmargin
-      \advance\dimen at ii by 1\dimen at i
-      \ifdim\wd\boxA > \dimen at ii % If the entry doesn't fit in one line
-      \ifdim\dimen@ > 0.8\dimen at ii   % due to long index text
-        % Try to split the text roughly evenly.  \dimen@ will be the length of 
-        % the first line.
-        \dimen@ = 0.7\dimen@
-        \dimen at ii = \hsize
-        \ifnum\dimen@>\dimen at ii
-          % If the entry is too long (for example, if it needs more than
-          % two lines), use all the space in the first line.
-          \dimen@ = \dimen at ii
-        \fi
-        \advance\leftskip by 0pt plus 1fill % ragged right
-        \advance \dimen@ by 1\rightskip
-        \parshape = 2 0pt \dimen@ 0em \dimen at ii
-        % Ideally we'd add a finite glue at the end of the first line only,
-        % instead of using \parshape with explicit line lengths, but TeX
-        % doesn't seem to provide a way to do such a thing.
-        %
-        % Indent all lines but the first one.
-        \advance\leftskip by 1em
-        \advance\parindent by -1em
-      \fi\fi
-      \indent % start paragraph
-      \unhbox\boxA
-      %
-      % Do not prefer a separate line ending with a hyphen to fewer lines.
-      \finalhyphendemerits = 0
-      %
-      % Word spacing - no stretch
-      \spaceskip=\fontdimen2\font minus \fontdimen4\font
-      %
-      \linepenalty=1000  % Discourage line breaks.
-      \hyphenpenalty=5000  % Discourage hyphenation.
-      %
-      \par % format the paragraph
-    \egroup % The \vbox
-    \fi
-  \endgroup
-}}
-
-\newskip\thinshrinkable
-\skip\thinshrinkable=.15em minus .15em
-
-% Like plain.tex's \dotfill, except uses up at least 1 em.
-% The filll stretch here overpowers both the fil and fill stretch to push
-% the page number to the right.
-\def\indexdotfill{\cleaders
-  \hbox{$\mathsurround=0pt \mkern1.5mu.\mkern1.5mu$}\hskip 1em plus 1filll}
-
-
-\def\primary #1{\line{#1\hfil}}
-
-\def\secondary{\indententry{0.5cm}}
-\def\tertiary{\indententry{1cm}}
-
-\def\indententry#1#2#3{%
-  \bgroup
-  \leftskip=#1
-  \entry{#2}{#3}%
-  \egroup
-}
-
-% Define two-column mode, which we use to typeset indexes.
-% Adapted from the TeXbook, page 416, which is to say,
-% the manmac.tex format used to print the TeXbook itself.
-\catcode`\@=11  % private names
-
-\newbox\partialpage
-\newdimen\doublecolumnhsize
-
-\def\begindoublecolumns{\begingroup % ended by \enddoublecolumns
-  % If not much space left on page, start a new page.
-  \ifdim\pagetotal>0.8\vsize\vfill\eject\fi
-  %
-  % Grab any single-column material above us.
-  \output = {%
-    \savetopmark
-    %
-    \global\setbox\partialpage = \vbox{%
-      % Unvbox the main output page.
-      \unvbox\PAGE
-      \kern-\topskip \kern\baselineskip
-    }%
-  }%
-  \eject % run that output routine to set \partialpage
-  %
-  % Use the double-column output routine for subsequent pages.
-  \output = {\doublecolumnout}%
-  %
-  % Change the page size parameters.  We could do this once outside this
-  % routine, in each of @smallbook, @afourpaper, and the default 8.5x11
-  % format, but then we repeat the same computation.  Repeating a couple
-  % of assignments once per index is clearly meaningless for the
-  % execution time, so we may as well do it in one place.
-  %
-  % First we halve the line length, less a little for the gutter between
-  % the columns.  We compute the gutter based on the line length, so it
-  % changes automatically with the paper format.  The magic constant
-  % below is chosen so that the gutter has the same value (well, +-<1pt)
-  % as it did when we hard-coded it.
-  %
-  % We put the result in a separate register, \doublecolumhsize, so we
-  % can restore it in \pagesofar, after \hsize itself has (potentially)
-  % been clobbered.
-  %
-  \doublecolumnhsize = \hsize
-    \advance\doublecolumnhsize by -.04154\hsize
-    \divide\doublecolumnhsize by 2
-  \hsize = \doublecolumnhsize
-  %
-  % Get the available space for the double columns -- the normal
-  % (undoubled) page height minus any material left over from the
-  % previous page.
-  \advance\vsize by -\ht\partialpage
-  \vsize = 2\vsize
-  %
-  % For the benefit of balancing columns
-  \advance\baselineskip by 0pt plus 0.5pt
-}
-
-% The double-column output routine for all double-column pages except
-% the last, which is done by \balancecolumns.
-%
-\def\doublecolumnout{%
-  %
-  \savetopmark
-  \splittopskip=\topskip \splitmaxdepth=\maxdepth
-  \dimen@ = \vsize
-  \divide\dimen@ by 2
-  %
-  % box0 will be the left-hand column, box2 the right.
-  \setbox0=\vsplit\PAGE to\dimen@ \setbox2=\vsplit\PAGE to\dimen@
-  \global\advance\vsize by 2\ht\partialpage
-  \onepageout\pagesofar % empty except for the first time we are called
-  \unvbox\PAGE
-  \penalty\outputpenalty
-}
-%
-% Re-output the contents of the output page -- any previous material,
-% followed by the two boxes we just split, in box0 and box2.
-\def\pagesofar{%
-  \unvbox\partialpage
-  %
-  \hsize = \doublecolumnhsize
-  \wd0=\hsize \wd2=\hsize
-  \hbox to\txipagewidth{\box0\hfil\box2}%
-}
-
-
-% Finished with with double columns.
-\def\enddoublecolumns{%
-  % The following penalty ensures that the page builder is exercised
-  % _before_ we change the output routine.  This is necessary in the
-  % following situation:
-  %
-  % The last section of the index consists only of a single entry.
-  % Before this section, \pagetotal is less than \pagegoal, so no
-  % break occurs before the last section starts.  However, the last
-  % section, consisting of \initial and the single \entry, does not
-  % fit on the page and has to be broken off.  Without the following
-  % penalty the page builder will not be exercised until \eject
-  % below, and by that time we'll already have changed the output
-  % routine to the \balancecolumns version, so the next-to-last
-  % double-column page will be processed with \balancecolumns, which
-  % is wrong:  The two columns will go to the main vertical list, with
-  % the broken-off section in the recent contributions.  As soon as
-  % the output routine finishes, TeX starts reconsidering the page
-  % break.  The two columns and the broken-off section both fit on the
-  % page, because the two columns now take up only half of the page
-  % goal.  When TeX sees \eject from below which follows the final
-  % section, it invokes the new output routine that we've set after
-  % \balancecolumns below; \onepageout will try to fit the two columns
-  % and the final section into the vbox of \txipageheight (see
-  % \pagebody), causing an overfull box.
-  %
-  % Note that glue won't work here, because glue does not exercise the
-  % page builder, unlike penalties (see The TeXbook, pp. 280-281).
-  \penalty0
-  %
-  \output = {%
-    % Split the last of the double-column material.
-    \savetopmark
-    \balancecolumns
-  }%
-  \eject % call the \output just set
-  \ifdim\pagetotal=0pt
-    % Having called \balancecolumns once, we do not
-    % want to call it again.  Therefore, reset \output to its normal
-    % definition right away.
-    \global\output=\expandafter{\the\defaultoutput}
-    %
-    \endgroup % started in \begindoublecolumns
-    % Leave the double-column material on the current page, no automatic
-    % page break.
-    \box\balancedcolumns
-    %
-    % \pagegoal was set to the doubled \vsize above, since we restarted
-    % the current page.  We're now back to normal single-column
-    % typesetting, so reset \pagegoal to the normal \vsize.
-    \global\vsize = \txipageheight %
-    \pagegoal = \txipageheight %
-  \else
-    % We had some left-over material.  This might happen when \doublecolumnout
-    % is called in \balancecolumns.  Try again.
-    \expandafter\enddoublecolumns
-  \fi
-}
-\newbox\balancedcolumns
-\setbox\balancedcolumns=\vbox{shouldnt see this}%
-%
-% Only called for the last of the double column material.  \doublecolumnout 
-% does the others.
-\def\balancecolumns{%
-  \setbox0 = \vbox{\unvbox\PAGE}% like \box255 but more efficient, see p.120.
-  \dimen@ = \ht0
-  \ifdim\dimen@<7\baselineskip
-    % Don't split a short final column in two.
-    \setbox2=\vbox{}%
-    \global\setbox\balancedcolumns=\vbox{\pagesofar}%
-  \else
-    % double the leading vertical space
-    \advance\dimen@ by \topskip
-    \advance\dimen@ by-\baselineskip
-    \divide\dimen@ by 2 % target to split to
-    \dimen at ii = \dimen@
-    \splittopskip = \topskip
-    % Loop until left column is at least as high as the right column.
-    {%
-      \vbadness = 10000
-      \loop
-        \global\setbox3 = \copy0
-        \global\setbox1 = \vsplit3 to \dimen@
-      \ifdim\ht1<\ht3
-        \global\advance\dimen@ by 1pt
-      \repeat
-    }%
-    % Now the left column is in box 1, and the right column in box 3.
-    %
-    % Check whether the left column has come out higher than the page itself.  
-    % (Note that we have doubled \vsize for the double columns, so
-    % the actual height of the page is 0.5\vsize).
-    \ifdim2\ht1>\vsize
-      % It appears that we have been called upon to balance too much material.
-      % Output some of it with \doublecolumnout, leaving the rest on the page.
-      \setbox\PAGE=\box0
-      \doublecolumnout
-    \else
-      % Compare the heights of the two columns.
-      \ifdim4\ht1>5\ht3
-        % Column heights are too different, so don't make their bottoms
-        % flush with each other.
-        \setbox2=\vbox to \ht1 {\unvbox3\vfill}%
-        \setbox0=\vbox to \ht1 {\unvbox1\vfill}%
-      \else
-        % Make column bottoms flush with each other.
-        \setbox2=\vbox to\ht1{\unvbox3\unskip}%
-        \setbox0=\vbox to\ht1{\unvbox1\unskip}%
-      \fi
-      \global\setbox\balancedcolumns=\vbox{\pagesofar}%
-    \fi
-  \fi
-  %
-}
-\catcode`\@ = \other
-
-
-\message{sectioning,}
-% Chapters, sections, etc.
-
-% Let's start with @part.
-\outer\parseargdef\part{\partzzz{#1}}
-\def\partzzz#1{%
-  \chapoddpage
-  \null
-  \vskip.3\vsize  % move it down on the page a bit
-  \begingroup
-    \noindent \titlefonts\rm #1\par % the text
-    \let\lastnode=\empty      % no node to associate with
-    \writetocentry{part}{#1}{}% but put it in the toc
-    \headingsoff              % no headline or footline on the part page
-    % This outputs a mark at the end of the page that clears \thischapter
-    % and \thissection, as is done in \startcontents.
-    \let\pchapsepmacro\relax
-    \chapmacro{}{Yomitfromtoc}{}%
-    \chapoddpage
-  \endgroup
-}
-
-% \unnumberedno is an oxymoron.  But we count the unnumbered
-% sections so that we can refer to them unambiguously in the pdf
-% outlines by their "section number".  We avoid collisions with chapter
-% numbers by starting them at 10000.  (If a document ever has 10000
-% chapters, we're in trouble anyway, I'm sure.)
-\newcount\unnumberedno \unnumberedno = 10000
-\newcount\chapno
-\newcount\secno        \secno=0
-\newcount\subsecno     \subsecno=0
-\newcount\subsubsecno  \subsubsecno=0
-
-% This counter is funny since it counts through charcodes of letters A, B, ...
-\newcount\appendixno  \appendixno = `\@
-%
-% \def\appendixletter{\char\the\appendixno}
-% We do the following ugly conditional instead of the above simple
-% construct for the sake of pdftex, which needs the actual
-% letter in the expansion, not just typeset.
-%
-\def\appendixletter{%
-  \ifnum\appendixno=`A A%
-  \else\ifnum\appendixno=`B B%
-  \else\ifnum\appendixno=`C C%
-  \else\ifnum\appendixno=`D D%
-  \else\ifnum\appendixno=`E E%
-  \else\ifnum\appendixno=`F F%
-  \else\ifnum\appendixno=`G G%
-  \else\ifnum\appendixno=`H H%
-  \else\ifnum\appendixno=`I I%
-  \else\ifnum\appendixno=`J J%
-  \else\ifnum\appendixno=`K K%
-  \else\ifnum\appendixno=`L L%
-  \else\ifnum\appendixno=`M M%
-  \else\ifnum\appendixno=`N N%
-  \else\ifnum\appendixno=`O O%
-  \else\ifnum\appendixno=`P P%
-  \else\ifnum\appendixno=`Q Q%
-  \else\ifnum\appendixno=`R R%
-  \else\ifnum\appendixno=`S S%
-  \else\ifnum\appendixno=`T T%
-  \else\ifnum\appendixno=`U U%
-  \else\ifnum\appendixno=`V V%
-  \else\ifnum\appendixno=`W W%
-  \else\ifnum\appendixno=`X X%
-  \else\ifnum\appendixno=`Y Y%
-  \else\ifnum\appendixno=`Z Z%
-  % The \the is necessary, despite appearances, because \appendixletter is
-  % expanded while writing the .toc file.  \char\appendixno is not
-  % expandable, thus it is written literally, thus all appendixes come out
-  % with the same letter (or @) in the toc without it.
-  \else\char\the\appendixno
-  \fi\fi\fi\fi\fi\fi\fi\fi\fi\fi\fi\fi\fi
-  \fi\fi\fi\fi\fi\fi\fi\fi\fi\fi\fi\fi\fi}
-
-% Each @chapter defines these (using marks) as the number+name, number
-% and name of the chapter.  Page headings and footings can use
-% these.  @section does likewise.
-\def\thischapter{}
-\def\thischapternum{}
-\def\thischaptername{}
-\def\thissection{}
-\def\thissectionnum{}
-\def\thissectionname{}
-
-\newcount\absseclevel % used to calculate proper heading level
-\newcount\secbase\secbase=0 % @raisesections/@lowersections modify this count
-
-% @raisesections: treat @section as chapter, @subsection as section, etc.
-\def\raisesections{\global\advance\secbase by -1}
-
-% @lowersections: treat @chapter as section, @section as subsection, etc.
-\def\lowersections{\global\advance\secbase by 1}
-
-% we only have subsub.
-\chardef\maxseclevel = 3
-%
-% A numbered section within an unnumbered changes to unnumbered too.
-% To achieve this, remember the "biggest" unnum. sec. we are currently in:
-\chardef\unnlevel = \maxseclevel
-%
-% Trace whether the current chapter is an appendix or not:
-% \chapheadtype is "N" or "A", unnumbered chapters are ignored.
-\def\chapheadtype{N}
-
-% Choose a heading macro
-% #1 is heading type
-% #2 is heading level
-% #3 is text for heading
-\def\genhead#1#2#3{%
-  % Compute the abs. sec. level:
-  \absseclevel=#2
-  \advance\absseclevel by \secbase
-  % Make sure \absseclevel doesn't fall outside the range:
-  \ifnum \absseclevel < 0
-    \absseclevel = 0
-  \else
-    \ifnum \absseclevel > 3
-      \absseclevel = 3
-    \fi
-  \fi
-  % The heading type:
-  \def\headtype{#1}%
-  \if \headtype U%
-    \ifnum \absseclevel < \unnlevel
-      \chardef\unnlevel = \absseclevel
-    \fi
-  \else
-    % Check for appendix sections:
-    \ifnum \absseclevel = 0
-      \edef\chapheadtype{\headtype}%
-    \else
-      \if \headtype A\if \chapheadtype N%
-	\errmessage{@appendix... within a non-appendix chapter}%
-      \fi\fi
-    \fi
-    % Check for numbered within unnumbered:
-    \ifnum \absseclevel > \unnlevel
-      \def\headtype{U}%
-    \else
-      \chardef\unnlevel = 3
-    \fi
-  \fi
-  % Now print the heading:
-  \if \headtype U%
-    \ifcase\absseclevel
-	\unnumberedzzz{#3}%
-    \or \unnumberedseczzz{#3}%
-    \or \unnumberedsubseczzz{#3}%
-    \or \unnumberedsubsubseczzz{#3}%
-    \fi
-  \else
-    \if \headtype A%
-      \ifcase\absseclevel
-	  \appendixzzz{#3}%
-      \or \appendixsectionzzz{#3}%
-      \or \appendixsubseczzz{#3}%
-      \or \appendixsubsubseczzz{#3}%
-      \fi
-    \else
-      \ifcase\absseclevel
-	  \chapterzzz{#3}%
-      \or \seczzz{#3}%
-      \or \numberedsubseczzz{#3}%
-      \or \numberedsubsubseczzz{#3}%
-      \fi
-    \fi
-  \fi
-  \suppressfirstparagraphindent
-}
-
-% an interface:
-\def\numhead{\genhead N}
-\def\apphead{\genhead A}
-\def\unnmhead{\genhead U}
-
-% @chapter, @appendix, @unnumbered.  Increment top-level counter, reset
-% all lower-level sectioning counters to zero.
-%
-% Also set \chaplevelprefix, which we prepend to @float sequence numbers
-% (e.g., figures), q.v.  By default (before any chapter), that is empty.
-\let\chaplevelprefix = \empty
-%
-\outer\parseargdef\chapter{\numhead0{#1}} % normally numhead0 calls chapterzzz
-\def\chapterzzz#1{%
-  % section resetting is \global in case the chapter is in a group, such
-  % as an @include file.
-  \global\secno=0 \global\subsecno=0 \global\subsubsecno=0
-    \global\advance\chapno by 1
-  %
-  % Used for \float.
-  \gdef\chaplevelprefix{\the\chapno.}%
-  \resetallfloatnos
-  %
-  % \putwordChapter can contain complex things in translations.
-  \toks0=\expandafter{\putwordChapter}%
-  \message{\the\toks0 \space \the\chapno}%
-  %
-  % Write the actual heading.
-  \chapmacro{#1}{Ynumbered}{\the\chapno}%
-  %
-  % So @section and the like are numbered underneath this chapter.
-  \global\let\section = \numberedsec
-  \global\let\subsection = \numberedsubsec
-  \global\let\subsubsection = \numberedsubsubsec
-}
-
-\outer\parseargdef\appendix{\apphead0{#1}} % normally calls appendixzzz
-%
-\def\appendixzzz#1{%
-  \global\secno=0 \global\subsecno=0 \global\subsubsecno=0
-    \global\advance\appendixno by 1
-  \gdef\chaplevelprefix{\appendixletter.}%
-  \resetallfloatnos
-  %
-  % \putwordAppendix can contain complex things in translations.
-  \toks0=\expandafter{\putwordAppendix}%
-  \message{\the\toks0 \space \appendixletter}%
-  %
-  \chapmacro{#1}{Yappendix}{\appendixletter}%
-  %
-  \global\let\section = \appendixsec
-  \global\let\subsection = \appendixsubsec
-  \global\let\subsubsection = \appendixsubsubsec
-}
-
-% normally unnmhead0 calls unnumberedzzz:
-\outer\parseargdef\unnumbered{\unnmhead0{#1}}
-\def\unnumberedzzz#1{%
-  \global\secno=0 \global\subsecno=0 \global\subsubsecno=0
-    \global\advance\unnumberedno by 1
-  %
-  % Since an unnumbered has no number, no prefix for figures.
-  \global\let\chaplevelprefix = \empty
-  \resetallfloatnos
-  %
-  % This used to be simply \message{#1}, but TeX fully expands the
-  % argument to \message.  Therefore, if #1 contained @-commands, TeX
-  % expanded them.  For example, in `@unnumbered The @cite{Book}', TeX
-  % expanded @cite (which turns out to cause errors because \cite is meant
-  % to be executed, not expanded).
-  %
-  % Anyway, we don't want the fully-expanded definition of @cite to appear
-  % as a result of the \message, we just want `@cite' itself.  We use
-  % \the<toks register> to achieve this: TeX expands \the<toks> only once,
-  % simply yielding the contents of <toks register>.  (We also do this for
-  % the toc entries.)
-  \toks0 = {#1}%
-  \message{(\the\toks0)}%
-  %
-  \chapmacro{#1}{Ynothing}{\the\unnumberedno}%
-  %
-  \global\let\section = \unnumberedsec
-  \global\let\subsection = \unnumberedsubsec
-  \global\let\subsubsection = \unnumberedsubsubsec
-}
-
-% @centerchap is like @unnumbered, but the heading is centered.
-\outer\parseargdef\centerchap{%
-  \let\centerparametersmaybe = \centerparameters
-  \unnmhead0{#1}%
-  \let\centerparametersmaybe = \relax
-}
-
-% @top is like @unnumbered.
-\let\top\unnumbered
-
-% Sections.
-% 
-\outer\parseargdef\numberedsec{\numhead1{#1}} % normally calls seczzz
-\def\seczzz#1{%
-  \global\subsecno=0 \global\subsubsecno=0  \global\advance\secno by 1
-  \sectionheading{#1}{sec}{Ynumbered}{\the\chapno.\the\secno}%
-}
-
-% normally calls appendixsectionzzz:
-\outer\parseargdef\appendixsection{\apphead1{#1}}
-\def\appendixsectionzzz#1{%
-  \global\subsecno=0 \global\subsubsecno=0  \global\advance\secno by 1
-  \sectionheading{#1}{sec}{Yappendix}{\appendixletter.\the\secno}%
-}
-\let\appendixsec\appendixsection
-
-% normally calls unnumberedseczzz:
-\outer\parseargdef\unnumberedsec{\unnmhead1{#1}}
-\def\unnumberedseczzz#1{%
-  \global\subsecno=0 \global\subsubsecno=0  \global\advance\secno by 1
-  \sectionheading{#1}{sec}{Ynothing}{\the\unnumberedno.\the\secno}%
-}
-
-% Subsections.
-% 
-% normally calls numberedsubseczzz:
-\outer\parseargdef\numberedsubsec{\numhead2{#1}}
-\def\numberedsubseczzz#1{%
-  \global\subsubsecno=0  \global\advance\subsecno by 1
-  \sectionheading{#1}{subsec}{Ynumbered}{\the\chapno.\the\secno.\the\subsecno}%
-}
-
-% normally calls appendixsubseczzz:
-\outer\parseargdef\appendixsubsec{\apphead2{#1}}
-\def\appendixsubseczzz#1{%
-  \global\subsubsecno=0  \global\advance\subsecno by 1
-  \sectionheading{#1}{subsec}{Yappendix}%
-                 {\appendixletter.\the\secno.\the\subsecno}%
-}
-
-% normally calls unnumberedsubseczzz:
-\outer\parseargdef\unnumberedsubsec{\unnmhead2{#1}}
-\def\unnumberedsubseczzz#1{%
-  \global\subsubsecno=0  \global\advance\subsecno by 1
-  \sectionheading{#1}{subsec}{Ynothing}%
-                 {\the\unnumberedno.\the\secno.\the\subsecno}%
-}
-
-% Subsubsections.
-% 
-% normally numberedsubsubseczzz:
-\outer\parseargdef\numberedsubsubsec{\numhead3{#1}}
-\def\numberedsubsubseczzz#1{%
-  \global\advance\subsubsecno by 1
-  \sectionheading{#1}{subsubsec}{Ynumbered}%
-                 {\the\chapno.\the\secno.\the\subsecno.\the\subsubsecno}%
-}
-
-% normally appendixsubsubseczzz:
-\outer\parseargdef\appendixsubsubsec{\apphead3{#1}}
-\def\appendixsubsubseczzz#1{%
-  \global\advance\subsubsecno by 1
-  \sectionheading{#1}{subsubsec}{Yappendix}%
-                 {\appendixletter.\the\secno.\the\subsecno.\the\subsubsecno}%
-}
-
-% normally unnumberedsubsubseczzz:
-\outer\parseargdef\unnumberedsubsubsec{\unnmhead3{#1}}
-\def\unnumberedsubsubseczzz#1{%
-  \global\advance\subsubsecno by 1
-  \sectionheading{#1}{subsubsec}{Ynothing}%
-                 {\the\unnumberedno.\the\secno.\the\subsecno.\the\subsubsecno}%
-}
-
-% These macros control what the section commands do, according
-% to what kind of chapter we are in (ordinary, appendix, or unnumbered).
-% Define them by default for a numbered chapter.
-\let\section = \numberedsec
-\let\subsection = \numberedsubsec
-\let\subsubsection = \numberedsubsubsec
-
-% Define @majorheading, @heading and @subheading
-
-\def\majorheading{%
-  {\advance\chapheadingskip by 10pt \chapbreak }%
-  \parsearg\chapheadingzzz
-}
-
-\def\chapheading{\chapbreak \parsearg\chapheadingzzz}
-\def\chapheadingzzz#1{%
-  \vbox{\chapfonts \raggedtitlesettings #1\par}%
-  \nobreak\bigskip \nobreak
-  \suppressfirstparagraphindent
-}
-
-% @heading, @subheading, @subsubheading.
-\parseargdef\heading{\sectionheading{#1}{sec}{Yomitfromtoc}{}
-  \suppressfirstparagraphindent}
-\parseargdef\subheading{\sectionheading{#1}{subsec}{Yomitfromtoc}{}
-  \suppressfirstparagraphindent}
-\parseargdef\subsubheading{\sectionheading{#1}{subsubsec}{Yomitfromtoc}{}
-  \suppressfirstparagraphindent}
-
-% These macros generate a chapter, section, etc. heading only
-% (including whitespace, linebreaking, etc. around it),
-% given all the information in convenient, parsed form.
-
-% Args are the skip and penalty (usually negative)
-\def\dobreak#1#2{\par\ifdim\lastskip<#1\removelastskip\penalty#2\vskip#1\fi}
-
-% Parameter controlling skip before chapter headings (if needed)
-\newskip\chapheadingskip
-
-% Define plain chapter starts, and page on/off switching for it.
-\def\chapbreak{\dobreak \chapheadingskip {-4000}}
-
-% Start a new page
-\def\chappager{\par\vfill\supereject}
-
-% \chapoddpage - start on an odd page for a new chapter
-% Because \domark is called before \chapoddpage, the filler page will
-% get the headings for the next chapter, which is wrong.  But we don't
-% care -- we just disable all headings on the filler page.
-\def\chapoddpage{%
-  \chappager
-  \ifodd\pageno \else
-    \begingroup
-      \headingsoff
-      \null
-      \chappager
-    \endgroup
-  \fi
-}
-
-\parseargdef\setchapternewpage{\csname CHAPPAG#1\endcsname}
-
-\def\CHAPPAGoff{%
-\global\let\contentsalignmacro = \chappager
-\global\let\pchapsepmacro=\chapbreak
-\global\let\pagealignmacro=\chappager}
-
-\def\CHAPPAGon{%
-\global\let\contentsalignmacro = \chappager
-\global\let\pchapsepmacro=\chappager
-\global\let\pagealignmacro=\chappager
-\global\def\HEADINGSon{\HEADINGSsingle}}
-
-\def\CHAPPAGodd{%
-\global\let\contentsalignmacro = \chapoddpage
-\global\let\pchapsepmacro=\chapoddpage
-\global\let\pagealignmacro=\chapoddpage
-\global\def\HEADINGSon{\HEADINGSdouble}}
-
-\CHAPPAGon
-
-% \chapmacro - Chapter opening.
-%
-% #1 is the text, #2 is the section type (Ynumbered, Ynothing,
-% Yappendix, Yomitfromtoc), #3 the chapter number.
-% Not used for @heading series.
-%
-% To test against our argument.
-\def\Ynothingkeyword{Ynothing}
-\def\Yappendixkeyword{Yappendix}
-\def\Yomitfromtockeyword{Yomitfromtoc}
-%
-\def\chapmacro#1#2#3{%
-  \expandafter\ifx\thisenv\titlepage\else
-    \checkenv{}% chapters, etc., should not start inside an environment.
-  \fi
-  % Insert the first mark before the heading break (see notes for \domark).
-  \let\prevchapterdefs=\currentchapterdefs
-  \let\prevsectiondefs=\currentsectiondefs
-  \gdef\currentsectiondefs{\gdef\thissectionname{}\gdef\thissectionnum{}%
-                        \gdef\thissection{}}%
-  %
-  \def\temptype{#2}%
-  \ifx\temptype\Ynothingkeyword
-    \gdef\currentchapterdefs{\gdef\thischaptername{#1}\gdef\thischapternum{}%
-                          \gdef\thischapter{\thischaptername}}%
-  \else\ifx\temptype\Yomitfromtockeyword
-    \gdef\currentchapterdefs{\gdef\thischaptername{#1}\gdef\thischapternum{}%
-                          \gdef\thischapter{}}%
-  \else\ifx\temptype\Yappendixkeyword
-    \toks0={#1}%
-    \xdef\currentchapterdefs{%
-      \gdef\noexpand\thischaptername{\the\toks0}%
-      \gdef\noexpand\thischapternum{\appendixletter}%
-      % \noexpand\putwordAppendix avoids expanding indigestible
-      % commands in some of the translations.
-      \gdef\noexpand\thischapter{\noexpand\putwordAppendix{}
-                                 \noexpand\thischapternum:
-                                 \noexpand\thischaptername}%
-    }%
-  \else
-    \toks0={#1}%
-    \xdef\currentchapterdefs{%
-      \gdef\noexpand\thischaptername{\the\toks0}%
-      \gdef\noexpand\thischapternum{\the\chapno}%
-      % \noexpand\putwordChapter avoids expanding indigestible
-      % commands in some of the translations.
-      \gdef\noexpand\thischapter{\noexpand\putwordChapter{}
-                                 \noexpand\thischapternum:
-                                 \noexpand\thischaptername}%
-    }%
-  \fi\fi\fi
-  %
-  % Output the mark.  Pass it through \safewhatsit, to take care of
-  % the preceding space.
-  \safewhatsit\domark
-  %
-  % Insert the chapter heading break.
-  \pchapsepmacro
-  %
-  % Now the second mark, after the heading break.  No break points
-  % between here and the heading.
-  \let\prevchapterdefs=\currentchapterdefs
-  \let\prevsectiondefs=\currentsectiondefs
-  \domark
-  %
-  {%
-    \chapfonts \rm
-    \let\footnote=\errfootnoteheading % give better error message
-    %
-    % Have to define \currentsection before calling \donoderef, because the
-    % xref code eventually uses it.  On the other hand, it has to be called
-    % after \pchapsepmacro, or the headline will change too soon.
-    \gdef\currentsection{#1}%
-    %
-    % Only insert the separating space if we have a chapter/appendix
-    % number, and don't print the unnumbered ``number''.
-    \ifx\temptype\Ynothingkeyword
-      \setbox0 = \hbox{}%
-      \def\toctype{unnchap}%
-    \else\ifx\temptype\Yomitfromtockeyword
-      \setbox0 = \hbox{}% contents like unnumbered, but no toc entry
-      \def\toctype{omit}%
-    \else\ifx\temptype\Yappendixkeyword
-      \setbox0 = \hbox{\putwordAppendix{} #3\enspace}%
-      \def\toctype{app}%
-    \else
-      \setbox0 = \hbox{#3\enspace}%
-      \def\toctype{numchap}%
-    \fi\fi\fi
-    %
-    % Write the toc entry for this chapter.  Must come before the
-    % \donoderef, because we include the current node name in the toc
-    % entry, and \donoderef resets it to empty.
-    \writetocentry{\toctype}{#1}{#3}%
-    %
-    % For pdftex, we have to write out the node definition (aka, make
-    % the pdfdest) after any page break, but before the actual text has
-    % been typeset.  If the destination for the pdf outline is after the
-    % text, then jumping from the outline may wind up with the text not
-    % being visible, for instance under high magnification.
-    \donoderef{#2}%
-    %
-    % Typeset the actual heading.
-    \nobreak % Avoid page breaks at the interline glue.
-    \vbox{\raggedtitlesettings \hangindent=\wd0 \centerparametersmaybe
-          \unhbox0 #1\par}%
-  }%
-  \nobreak\bigskip % no page break after a chapter title
-  \nobreak
-}
-
-% @centerchap -- centered and unnumbered.
-\let\centerparametersmaybe = \relax
-\def\centerparameters{%
-  \advance\rightskip by 3\rightskip
-  \leftskip = \rightskip
-  \parfillskip = 0pt
-}
-
-
-% Section titles.  These macros combine the section number parts and
-% call the generic \sectionheading to do the printing.
-%
-\newskip\secheadingskip
-\def\secheadingbreak{\dobreak \secheadingskip{-1000}}
-
-% Subsection titles.
-\newskip\subsecheadingskip
-\def\subsecheadingbreak{\dobreak \subsecheadingskip{-500}}
-
-% Subsubsection titles.
-\def\subsubsecheadingskip{\subsecheadingskip}
-\def\subsubsecheadingbreak{\subsecheadingbreak}
-
-
-% Print any size, any type, section title.
-%
-% #1 is the text of the title,
-% #2 is the section level (sec/subsec/subsubsec),
-% #3 is the section type (Ynumbered, Ynothing, Yappendix, Yomitfromtoc),
-% #4 is the section number.
-%
-\def\seckeyword{sec}
-%
-\def\sectionheading#1#2#3#4{%
-  {%
-    \def\sectionlevel{#2}%
-    \def\temptype{#3}%
-    %
-    % It is ok for the @heading series commands to appear inside an
-    % environment (it's been historically allowed, though the logic is
-    % dubious), but not the others.
-    \ifx\temptype\Yomitfromtockeyword\else
-      \checkenv{}% non-@*heading should not be in an environment.
-    \fi
-    \let\footnote=\errfootnoteheading
-    %
-    % Switch to the right set of fonts.
-    \csname #2fonts\endcsname \rm
-    %
-    % Insert first mark before the heading break (see notes for \domark).
-    \let\prevsectiondefs=\currentsectiondefs
-    \ifx\temptype\Ynothingkeyword
-      \ifx\sectionlevel\seckeyword
-        \gdef\currentsectiondefs{\gdef\thissectionname{#1}\gdef\thissectionnum{}%
-                              \gdef\thissection{\thissectionname}}%
-      \fi
-    \else\ifx\temptype\Yomitfromtockeyword
-      % Don't redefine \thissection.
-    \else\ifx\temptype\Yappendixkeyword
-      \ifx\sectionlevel\seckeyword
-        \toks0={#1}%
-        \xdef\currentsectiondefs{%
-          \gdef\noexpand\thissectionname{\the\toks0}%
-          \gdef\noexpand\thissectionnum{#4}%
-          % \noexpand\putwordSection avoids expanding indigestible
-          % commands in some of the translations.
-          \gdef\noexpand\thissection{\noexpand\putwordSection{}
-                                     \noexpand\thissectionnum:
-                                     \noexpand\thissectionname}%
-        }%
-      \fi
-    \else
-      \ifx\sectionlevel\seckeyword
-        \toks0={#1}%
-        \xdef\currentsectiondefs{%
-          \gdef\noexpand\thissectionname{\the\toks0}%
-          \gdef\noexpand\thissectionnum{#4}%
-          % \noexpand\putwordSection avoids expanding indigestible
-          % commands in some of the translations.
-          \gdef\noexpand\thissection{\noexpand\putwordSection{}
-                                     \noexpand\thissectionnum:
-                                     \noexpand\thissectionname}%
-        }%
-      \fi
-    \fi\fi\fi
-    %
-    % Go into vertical mode.  Usually we'll already be there, but we
-    % don't want the following whatsit to end up in a preceding paragraph
-    % if the document didn't happen to have a blank line.
-    \par
-    %
-    % Output the mark.  Pass it through \safewhatsit, to take care of
-    % the preceding space.
-    \safewhatsit\domark
-    %
-    % Insert space above the heading.
-    \csname #2headingbreak\endcsname
-    %
-    % Now the second mark, after the heading break.  No break points
-    % between here and the heading.
-    \global\let\prevsectiondefs=\currentsectiondefs
-    \domark
-    %
-    % Only insert the space after the number if we have a section number.
-    \ifx\temptype\Ynothingkeyword
-      \setbox0 = \hbox{}%
-      \def\toctype{unn}%
-      \gdef\currentsection{#1}%
-    \else\ifx\temptype\Yomitfromtockeyword
-      % for @headings -- no section number, don't include in toc,
-      % and don't redefine \currentsection.
-      \setbox0 = \hbox{}%
-      \def\toctype{omit}%
-      \let\sectionlevel=\empty
-    \else\ifx\temptype\Yappendixkeyword
-      \setbox0 = \hbox{#4\enspace}%
-      \def\toctype{app}%
-      \gdef\currentsection{#1}%
-    \else
-      \setbox0 = \hbox{#4\enspace}%
-      \def\toctype{num}%
-      \gdef\currentsection{#1}%
-    \fi\fi\fi
-    %
-    % Write the toc entry (before \donoderef).  See comments in \chapmacro.
-    \writetocentry{\toctype\sectionlevel}{#1}{#4}%
-    %
-    % Write the node reference (= pdf destination for pdftex).
-    % Again, see comments in \chapmacro.
-    \donoderef{#3}%
-    %
-    % Interline glue will be inserted when the vbox is completed.
-    % That glue will be a valid breakpoint for the page, since it'll be
-    % preceded by a whatsit (usually from the \donoderef, or from the
-    % \writetocentry if there was no node).  We don't want to allow that
-    % break, since then the whatsits could end up on page n while the
-    % section is on page n+1, thus toc/etc. are wrong.  Debian bug 276000.
-    \nobreak
-    %
-    % Output the actual section heading.
-    \vbox{\hyphenpenalty=10000 \tolerance=5000 \parindent=0pt \ptexraggedright
-          \hangindent=\wd0  % zero if no section number
-          \unhbox0 #1}%
-  }%
-  % Add extra space after the heading -- half of whatever came above it.
-  % Don't allow stretch, though.
-  \kern .5 \csname #2headingskip\endcsname
-  %
-  % Do not let the kern be a potential breakpoint, as it would be if it
-  % was followed by glue.
-  \nobreak
-  %
-  % We'll almost certainly start a paragraph next, so don't let that
-  % glue accumulate.  (Not a breakpoint because it's preceded by a
-  % discardable item.)  However, when a paragraph is not started next
-  % (\startdefun, \cartouche, \center, etc.), this needs to be wiped out
-  % or the negative glue will cause weirdly wrong output, typically
-  % obscuring the section heading with something else.
-  \vskip-\parskip
-  %
-  % This is so the last item on the main vertical list is a known
-  % \penalty > 10000, so \startdefun, etc., can recognize the situation
-  % and do the needful.
-  \penalty 10001
-}
-
-
-\message{toc,}
-% Table of contents.
-\newwrite\tocfile
-
-% Write an entry to the toc file, opening it if necessary.
-% Called from @chapter, etc.
-%
-% Example usage: \writetocentry{sec}{Section Name}{\the\chapno.\the\secno}
-% We append the current node name (if any) and page number as additional
-% arguments for the \{chap,sec,...}entry macros which will eventually
-% read this.  The node name is used in the pdf outlines as the
-% destination to jump to.
-%
-% We open the .toc file for writing here instead of at @setfilename (or
-% any other fixed time) so that @contents can be anywhere in the document.
-% But if #1 is `omit', then we don't do anything.  This is used for the
-% table of contents chapter openings themselves.
-%
-\newif\iftocfileopened
-\def\omitkeyword{omit}%
-%
-\def\writetocentry#1#2#3{%
-  \edef\writetoctype{#1}%
-  \ifx\writetoctype\omitkeyword \else
-    \iftocfileopened\else
-      \immediate\openout\tocfile = \jobname.toc
-      \global\tocfileopenedtrue
-    \fi
-    %
-    \iflinks
-      {\atdummies
-       \edef\temp{%
-         \write\tocfile{@#1entry{#2}{#3}{\lastnode}{\noexpand\folio}}}%
-       \temp
-      }%
-    \fi
-  \fi
-  %
-  % Tell \shipout to create a pdf destination on each page, if we're
-  % writing pdf.  These are used in the table of contents.  We can't
-  % just write one on every page because the title pages are numbered
-  % 1 and 2 (the page numbers aren't printed), and so are the first
-  % two pages of the document.  Thus, we'd have two destinations named
-  % `1', and two named `2'.
-  \ifpdforxetex
-    \global\pdfmakepagedesttrue
-  \fi
-}
-
-
-% These characters do not print properly in the Computer Modern roman
-% fonts, so we must take special care.  This is more or less redundant
-% with the Texinfo input format setup at the end of this file.
-%
-\def\activecatcodes{%
-  \catcode`\"=\active
-  \catcode`\$=\active
-  \catcode`\<=\active
-  \catcode`\>=\active
-  \catcode`\\=\active
-  \catcode`\^=\active
-  \catcode`\_=\active
-  \catcode`\|=\active
-  \catcode`\~=\active
-}
-
-
-% Read the toc file, which is essentially Texinfo input.
-\def\readtocfile{%
-  \setupdatafile
-  \activecatcodes
-  \input \tocreadfilename
-}
-
-\newskip\contentsrightmargin \contentsrightmargin=1in
-\newcount\savepageno
-\newcount\lastnegativepageno \lastnegativepageno = -1
-
-% Prepare to read what we've written to \tocfile.
-%
-\def\startcontents#1{%
-  % If @setchapternewpage on, and @headings double, the contents should
-  % start on an odd page, unlike chapters.  Thus, we maintain
-  % \contentsalignmacro in parallel with \pagealignmacro.
-  % From: Torbjorn Granlund <tege at matematik.su.se>
-  \contentsalignmacro
-  \immediate\closeout\tocfile
-  %
-  % Don't need to put `Contents' or `Short Contents' in the headline.
-  % It is abundantly clear what they are.
-  \chapmacro{#1}{Yomitfromtoc}{}%
-  %
-  \savepageno = \pageno
-  \begingroup                  % Set up to handle contents files properly.
-    \raggedbottom              % Worry more about breakpoints than the bottom.
-    \entryrightmargin=\contentsrightmargin % Don't use the full line length.
-    %
-    % Roman numerals for page numbers.
-    \ifnum \pageno>0 \global\pageno = \lastnegativepageno \fi
-}
-
-% redefined for the two-volume lispref.  We always output on
-% \jobname.toc even if this is redefined.
-%
-\def\tocreadfilename{\jobname.toc}
-
-% Normal (long) toc.
-%
-\def\contents{%
-  \startcontents{\putwordTOC}%
-    \openin 1 \tocreadfilename\space
-    \ifeof 1 \else
-      \readtocfile
-    \fi
-    \vfill \eject
-    \contentsalignmacro % in case @setchapternewpage odd is in effect
-    \ifeof 1 \else
-      \pdfmakeoutlines
-    \fi
-    \closein 1
-  \endgroup
-  \lastnegativepageno = \pageno
-  \global\pageno = \savepageno
-}
-
-% And just the chapters.
-\def\summarycontents{%
-  \startcontents{\putwordShortTOC}%
-    %
-    \let\partentry = \shortpartentry
-    \let\numchapentry = \shortchapentry
-    \let\appentry = \shortchapentry
-    \let\unnchapentry = \shortunnchapentry
-    % We want a true roman here for the page numbers.
-    \secfonts
-    \let\rm=\shortcontrm \let\bf=\shortcontbf
-    \let\sl=\shortcontsl \let\tt=\shortconttt
-    \rm
-    \hyphenpenalty = 10000
-    \advance\baselineskip by 1pt % Open it up a little.
-    \def\numsecentry##1##2##3##4{}
-    \let\appsecentry = \numsecentry
-    \let\unnsecentry = \numsecentry
-    \let\numsubsecentry = \numsecentry
-    \let\appsubsecentry = \numsecentry
-    \let\unnsubsecentry = \numsecentry
-    \let\numsubsubsecentry = \numsecentry
-    \let\appsubsubsecentry = \numsecentry
-    \let\unnsubsubsecentry = \numsecentry
-    \openin 1 \tocreadfilename\space
-    \ifeof 1 \else
-      \readtocfile
-    \fi
-    \closein 1
-    \vfill \eject
-    \contentsalignmacro % in case @setchapternewpage odd is in effect
-  \endgroup
-  \lastnegativepageno = \pageno
-  \global\pageno = \savepageno
-}
-\let\shortcontents = \summarycontents
-
-% Typeset the label for a chapter or appendix for the short contents.
-% The arg is, e.g., `A' for an appendix, or `3' for a chapter.
-%
-\def\shortchaplabel#1{%
-  % This space should be enough, since a single number is .5em, and the
-  % widest letter (M) is 1em, at least in the Computer Modern fonts.
-  % But use \hss just in case.
-  % (This space doesn't include the extra space that gets added after
-  % the label; that gets put in by \shortchapentry above.)
-  %
-  % We'd like to right-justify chapter numbers, but that looks strange
-  % with appendix letters.  And right-justifying numbers and
-  % left-justifying letters looks strange when there is less than 10
-  % chapters.  Have to read the whole toc once to know how many chapters
-  % there are before deciding ...
-  \hbox to 1em{#1\hss}%
-}
-
-% These macros generate individual entries in the table of contents.
-% The first argument is the chapter or section name.
-% The last argument is the page number.
-% The arguments in between are the chapter number, section number, ...
-
-% Parts, in the main contents.  Replace the part number, which doesn't
-% exist, with an empty box.  Let's hope all the numbers have the same width.
-% Also ignore the page number, which is conventionally not printed.
-\def\numeralbox{\setbox0=\hbox{8}\hbox to \wd0{\hfil}}
-\def\partentry#1#2#3#4{%
-  % Add stretch and a bonus for breaking the page before the part heading.
-  % This reduces the chance of the page being broken immediately after the
-  % part heading, before a following chapter heading.
-  \vskip 0pt plus 5\baselineskip
-  \penalty-300
-  \vskip 0pt plus -5\baselineskip
-  \dochapentry{\numeralbox\labelspace#1}{}%
-}
-%
-% Parts, in the short toc.
-\def\shortpartentry#1#2#3#4{%
-  \penalty-300
-  \vskip.5\baselineskip plus.15\baselineskip minus.1\baselineskip
-  \shortchapentry{{\bf #1}}{\numeralbox}{}{}%
-}
-
-% Chapters, in the main contents.
-\def\numchapentry#1#2#3#4{\dochapentry{#2\labelspace#1}{#4}}
-
-% Chapters, in the short toc.
-% See comments in \dochapentry re vbox and related settings.
-\def\shortchapentry#1#2#3#4{%
-  \tocentry{\shortchaplabel{#2}\labelspace #1}{\doshortpageno\bgroup#4\egroup}%
-}
-
-% Appendices, in the main contents.
-% Need the word Appendix, and a fixed-size box.
-%
-\def\appendixbox#1{%
-  % We use M since it's probably the widest letter.
-  \setbox0 = \hbox{\putwordAppendix{} M}%
-  \hbox to \wd0{\putwordAppendix{} #1\hss}}
-%
-\def\appentry#1#2#3#4{\dochapentry{\appendixbox{#2}\hskip.7em#1}{#4}}
-
-% Unnumbered chapters.
-\def\unnchapentry#1#2#3#4{\dochapentry{#1}{#4}}
-\def\shortunnchapentry#1#2#3#4{\tocentry{#1}{\doshortpageno\bgroup#4\egroup}}
-
-% Sections.
-\def\numsecentry#1#2#3#4{\dosecentry{#2\labelspace#1}{#4}}
-\let\appsecentry=\numsecentry
-\def\unnsecentry#1#2#3#4{\dosecentry{#1}{#4}}
-
-% Subsections.
-\def\numsubsecentry#1#2#3#4{\dosubsecentry{#2\labelspace#1}{#4}}
-\let\appsubsecentry=\numsubsecentry
-\def\unnsubsecentry#1#2#3#4{\dosubsecentry{#1}{#4}}
-
-% And subsubsections.
-\def\numsubsubsecentry#1#2#3#4{\dosubsubsecentry{#2\labelspace#1}{#4}}
-\let\appsubsubsecentry=\numsubsubsecentry
-\def\unnsubsubsecentry#1#2#3#4{\dosubsubsecentry{#1}{#4}}
-
-% This parameter controls the indentation of the various levels.
-% Same as \defaultparindent.
-\newdimen\tocindent \tocindent = 15pt
-
-% Now for the actual typesetting. In all these, #1 is the text and #2 is the
-% page number.
-%
-% If the toc has to be broken over pages, we want it to be at chapters
-% if at all possible; hence the \penalty.
-\def\dochapentry#1#2{%
-   \penalty-300 \vskip1\baselineskip plus.33\baselineskip minus.25\baselineskip
-   \begingroup
-     % Move the page numbers slightly to the right
-     \advance\entryrightmargin by -0.05em
-     \chapentryfonts
-     \tocentry{#1}{\dopageno\bgroup#2\egroup}%
-   \endgroup
-   \nobreak\vskip .25\baselineskip plus.1\baselineskip
-}
-
-\def\dosecentry#1#2{\begingroup
-  \secentryfonts \leftskip=\tocindent
-  \tocentry{#1}{\dopageno\bgroup#2\egroup}%
-\endgroup}
-
-\def\dosubsecentry#1#2{\begingroup
-  \subsecentryfonts \leftskip=2\tocindent
-  \tocentry{#1}{\dopageno\bgroup#2\egroup}%
-\endgroup}
-
-\def\dosubsubsecentry#1#2{\begingroup
-  \subsubsecentryfonts \leftskip=3\tocindent
-  \tocentry{#1}{\dopageno\bgroup#2\egroup}%
-\endgroup}
-
-% We use the same \entry macro as for the index entries.
-\let\tocentry = \entry
-
-% Space between chapter (or whatever) number and the title.
-\def\labelspace{\hskip1em \relax}
-
-\def\dopageno#1{{\rm #1}}
-\def\doshortpageno#1{{\rm #1}}
-
-\def\chapentryfonts{\secfonts \rm}
-\def\secentryfonts{\textfonts}
-\def\subsecentryfonts{\textfonts}
-\def\subsubsecentryfonts{\textfonts}
-
-
-\message{environments,}
-% @foo ... @end foo.
-
-% @tex ... @end tex    escapes into raw TeX temporarily.
-% One exception: @ is still an escape character, so that @end tex works.
-% But \@ or @@ will get a plain @ character.
-
-\envdef\tex{%
-  \setupmarkupstyle{tex}%
-  \catcode `\\=0 \catcode `\{=1 \catcode `\}=2
-  \catcode `\$=3 \catcode `\&=4 \catcode `\#=6
-  \catcode `\^=7 \catcode `\_=8 \catcode `\~=\active \let~=\tie
-  \catcode `\%=14
-  \catcode `\+=\other
-  \catcode `\"=\other
-  \catcode `\|=\other
-  \catcode `\<=\other
-  \catcode `\>=\other
-  \catcode `\`=\other
-  \catcode `\'=\other
-  %
-  % ' is active in math mode (mathcode"8000).  So reset it, and all our
-  % other math active characters (just in case), to plain's definitions.
-  \mathactive
-  %
-  % Inverse of the list at the beginning of the file.
-  \let\b=\ptexb
-  \let\bullet=\ptexbullet
-  \let\c=\ptexc
-  \let\,=\ptexcomma
-  \let\.=\ptexdot
-  \let\dots=\ptexdots
-  \let\equiv=\ptexequiv
-  \let\!=\ptexexclam
-  \let\i=\ptexi
-  \let\indent=\ptexindent
-  \let\noindent=\ptexnoindent
-  \let\{=\ptexlbrace
-  \let\+=\tabalign
-  \let\}=\ptexrbrace
-  \let\/=\ptexslash
-  \let\sp=\ptexsp
-  \let\*=\ptexstar
-  %\let\sup=\ptexsup % do not redefine, we want @sup to work in math mode
-  \let\t=\ptext
-  \expandafter \let\csname top\endcsname=\ptextop  % we've made it outer
-  \let\frenchspacing=\plainfrenchspacing
-  %
-  \def\endldots{\mathinner{\ldots\ldots\ldots\ldots}}%
-  \def\enddots{\relax\ifmmode\endldots\else$\mathsurround=0pt \endldots\,$\fi}%
-  \def\@{@}%
-}
-% There is no need to define \Etex.
-
-% Define @lisp ... @end lisp.
-% @lisp environment forms a group so it can rebind things,
-% including the definition of @end lisp (which normally is erroneous).
-
-% Amount to narrow the margins by for @lisp.
-\newskip\lispnarrowing \lispnarrowing=0.4in
-
-% This is the definition that ^^M gets inside @lisp, @example, and other
-% such environments.  \null is better than a space, since it doesn't
-% have any width.
-\def\lisppar{\null\endgraf}
-
-% This space is always present above and below environments.
-\newskip\envskipamount \envskipamount = 0pt
-
-% Make spacing and below environment symmetrical.  We use \parskip here
-% to help in doing that, since in @example-like environments \parskip
-% is reset to zero; thus the \afterenvbreak inserts no space -- but the
-% start of the next paragraph will insert \parskip.
-%
-\def\aboveenvbreak{{%
-  % =10000 instead of <10000 because of a special case in \itemzzz and
-  % \sectionheading, q.v.
-  \ifnum \lastpenalty=10000 \else
-    \advance\envskipamount by \parskip
-    \endgraf
-    \ifdim\lastskip<\envskipamount
-      \removelastskip
-      \ifnum\lastpenalty<10000
-        % Penalize breaking before the environment, because preceding text
-        % often leads into it.
-        \penalty100
-      \fi
-      \vskip\envskipamount
-    \fi
-  \fi
-}}
-
-\def\afterenvbreak{{%
-  % =10000 instead of <10000 because of a special case in \itemzzz and
-  % \sectionheading, q.v.
-  \ifnum \lastpenalty=10000 \else
-    \advance\envskipamount by \parskip
-    \endgraf
-    \ifdim\lastskip<\envskipamount
-      \removelastskip
-      % it's not a good place to break if the last penalty was \nobreak
-      % or better ...
-      \ifnum\lastpenalty<10000 \penalty-50 \fi
-      \vskip\envskipamount
-    \fi
-  \fi
-}}
-
-% \nonarrowing is a flag.  If "set", @lisp etc don't narrow margins; it will
-% also clear it, so that its embedded environments do the narrowing again.
-\let\nonarrowing=\relax
-
-% @cartouche ... @end cartouche: draw rectangle w/rounded corners around
-% environment contents.
-
-%
-\def\ctl{{\circle\char'013\hskip -6pt}}% 6pt from pl file: 1/2charwidth
-\def\ctr{{\hskip 6pt\circle\char'010}}
-\def\cbl{{\circle\char'012\hskip -6pt}}
-\def\cbr{{\hskip 6pt\circle\char'011}}
-\def\carttop{\hbox to \cartouter{\hskip\lskip
-        \ctl\leaders\hrule height\circthick\hfil\ctr
-        \hskip\rskip}}
-\def\cartbot{\hbox to \cartouter{\hskip\lskip
-        \cbl\leaders\hrule height\circthick\hfil\cbr
-        \hskip\rskip}}
-%
-\newskip\lskip\newskip\rskip
-
-% only require the font if @cartouche is actually used
-\def\cartouchefontdefs{%
-  \font\circle=lcircle10\relax
-  \circthick=\fontdimen8\circle
-}
-\newdimen\circthick
-\newdimen\cartouter\newdimen\cartinner
-\newskip\normbskip\newskip\normpskip\newskip\normlskip
-
-
-\envdef\cartouche{%
-  \cartouchefontdefs
-  \ifhmode\par\fi  % can't be in the midst of a paragraph.
-  \startsavinginserts
-  \lskip=\leftskip \rskip=\rightskip
-  \leftskip=0pt\rightskip=0pt % we want these *outside*.
-  \cartinner=\hsize \advance\cartinner by-\lskip
-  \advance\cartinner by-\rskip
-  \cartouter=\hsize
-  \advance\cartouter by 18.4pt	% allow for 3pt kerns on either
-				% side, and for 6pt waste from
-				% each corner char, and rule thickness
-  \normbskip=\baselineskip \normpskip=\parskip \normlskip=\lineskip
-  %
-  % If this cartouche directly follows a sectioning command, we need the
-  % \parskip glue (backspaced over by default) or the cartouche can
-  % collide with the section heading.
-  \ifnum\lastpenalty>10000 \vskip\parskip \penalty\lastpenalty \fi
-  %
-  \setbox\groupbox=\vbox\bgroup
-      \baselineskip=0pt\parskip=0pt\lineskip=0pt
-      \carttop
-      \hbox\bgroup
-	  \hskip\lskip
-	  \vrule\kern3pt
-	  \vbox\bgroup
-	      \kern3pt
-	      \hsize=\cartinner
-	      \baselineskip=\normbskip
-	      \lineskip=\normlskip
-	      \parskip=\normpskip
-	      \vskip -\parskip
-	      \comment % For explanation, see the end of def\group.
-}
-\def\Ecartouche{%
-              \ifhmode\par\fi
-	      \kern3pt
-	  \egroup
-	  \kern3pt\vrule
-	  \hskip\rskip
-      \egroup
-      \cartbot
-  \egroup
-  \addgroupbox
-  \checkinserts
-}
-
-
-% This macro is called at the beginning of all the @example variants,
-% inside a group.
-\newdimen\nonfillparindent
-\def\nonfillstart{%
-  \aboveenvbreak
-  \ifdim\hfuzz < 12pt \hfuzz = 12pt \fi % Don't be fussy
-  \sepspaces % Make spaces be word-separators rather than space tokens.
-  \let\par = \lisppar % don't ignore blank lines
-  \obeylines % each line of input is a line of output
-  \parskip = 0pt
-  % Turn off paragraph indentation but redefine \indent to emulate
-  % the normal \indent.
-  \nonfillparindent=\parindent
-  \parindent = 0pt
-  \let\indent\nonfillindent
-  %
-  \emergencystretch = 0pt % don't try to avoid overfull boxes
-  \ifx\nonarrowing\relax
-    \advance \leftskip by \lispnarrowing
-    \exdentamount=\lispnarrowing
-  \else
-    \let\nonarrowing = \relax
-  \fi
-  \let\exdent=\nofillexdent
-}
-
-\begingroup
-\obeyspaces
-% We want to swallow spaces (but not other tokens) after the fake
-% @indent in our nonfill-environments, where spaces are normally
-% active and set to @tie, resulting in them not being ignored after
-% @indent.
-\gdef\nonfillindent{\futurelet\temp\nonfillindentcheck}%
-\gdef\nonfillindentcheck{%
-\ifx\temp %
-\expandafter\nonfillindentgobble%
-\else%
-\leavevmode\nonfillindentbox%
-\fi%
-}%
-\endgroup
-\def\nonfillindentgobble#1{\nonfillindent}
-\def\nonfillindentbox{\hbox to \nonfillparindent{\hss}}
-
-% If you want all examples etc. small: @set dispenvsize small.
-% If you want even small examples the full size: @set dispenvsize nosmall.
-% This affects the following displayed environments:
-%    @example, @display, @format, @lisp
-%
-\def\smallword{small}
-\def\nosmallword{nosmall}
-\let\SETdispenvsize\relax
-\def\setnormaldispenv{%
-  \ifx\SETdispenvsize\smallword
-    % end paragraph for sake of leading, in case document has no blank
-    % line.  This is redundant with what happens in \aboveenvbreak, but
-    % we need to do it before changing the fonts, and it's inconvenient
-    % to change the fonts afterward.
-    \ifnum \lastpenalty=10000 \else \endgraf \fi
-    \smallexamplefonts \rm
-  \fi
-}
-\def\setsmalldispenv{%
-  \ifx\SETdispenvsize\nosmallword
-  \else
-    \ifnum \lastpenalty=10000 \else \endgraf \fi
-    \smallexamplefonts \rm
-  \fi
-}
-
-% We often define two environments, @foo and @smallfoo.
-% Let's do it in one command.  #1 is the env name, #2 the definition.
-\def\makedispenvdef#1#2{%
-  \expandafter\envdef\csname#1\endcsname {\setnormaldispenv #2}%
-  \expandafter\envdef\csname small#1\endcsname {\setsmalldispenv #2}%
-  \expandafter\let\csname E#1\endcsname \afterenvbreak
-  \expandafter\let\csname Esmall#1\endcsname \afterenvbreak
-}
-
-% Define two environment synonyms (#1 and #2) for an environment.
-\def\maketwodispenvdef#1#2#3{%
-  \makedispenvdef{#1}{#3}%
-  \makedispenvdef{#2}{#3}%
-}
-%
-% @lisp: indented, narrowed, typewriter font;
-% @example: same as @lisp.
-%
-% @smallexample and @smalllisp: use smaller fonts.
-% Originally contributed by Pavel at xerox.
-%
-\maketwodispenvdef{lisp}{example}{%
-  \nonfillstart
-  \tt\setupmarkupstyle{example}%
-  \let\kbdfont = \kbdexamplefont % Allow @kbd to do something special.
-  \gobble % eat return
-}
-% @display/@smalldisplay: same as @lisp except keep current font.
-%
-\makedispenvdef{display}{%
-  \nonfillstart
-  \gobble
-}
-
-% @format/@smallformat: same as @display except don't narrow margins.
-%
-\makedispenvdef{format}{%
-  \let\nonarrowing = t%
-  \nonfillstart
-  \gobble
-}
-
-% @flushleft: same as @format, but doesn't obey \SETdispenvsize.
-\envdef\flushleft{%
-  \let\nonarrowing = t%
-  \nonfillstart
-  \gobble
-}
-\let\Eflushleft = \afterenvbreak
-
-% @flushright.
-%
-\envdef\flushright{%
-  \let\nonarrowing = t%
-  \nonfillstart
-  \advance\leftskip by 0pt plus 1fill\relax
-  \gobble
-}
-\let\Eflushright = \afterenvbreak
-
-
-% @raggedright does more-or-less normal line breaking but no right
-% justification.  From plain.tex.
-\envdef\raggedright{%
-  \rightskip0pt plus2.4em \spaceskip.3333em \xspaceskip.5em\relax
-}
-\let\Eraggedright\par
-
-\envdef\raggedleft{%
-  \parindent=0pt \leftskip0pt plus2em
-  \spaceskip.3333em \xspaceskip.5em \parfillskip=0pt
-  \hbadness=10000 % Last line will usually be underfull, so turn off
-                  % badness reporting.
-}
-\let\Eraggedleft\par
-
-\envdef\raggedcenter{%
-  \parindent=0pt \rightskip0pt plus1em \leftskip0pt plus1em
-  \spaceskip.3333em \xspaceskip.5em \parfillskip=0pt
-  \hbadness=10000 % Last line will usually be underfull, so turn off
-                  % badness reporting.
-}
-\let\Eraggedcenter\par
-
-
-% @quotation does normal linebreaking (hence we can't use \nonfillstart)
-% and narrows the margins.  We keep \parskip nonzero in general, since
-% we're doing normal filling.  So, when using \aboveenvbreak and
-% \afterenvbreak, temporarily make \parskip 0.
-%
-\makedispenvdef{quotation}{\quotationstart}
-%
-\def\quotationstart{%
-  \indentedblockstart % same as \indentedblock, but increase right margin too.
-  \ifx\nonarrowing\relax
-    \advance\rightskip by \lispnarrowing
-  \fi
-  \parsearg\quotationlabel
-}
-
-% We have retained a nonzero parskip for the environment, since we're
-% doing normal filling.
-%
-\def\Equotation{%
-  \par
-  \ifx\quotationauthor\thisisundefined\else
-    % indent a bit.
-    \leftline{\kern 2\leftskip \sl ---\quotationauthor}%
-  \fi
-  {\parskip=0pt \afterenvbreak}%
-}
-\def\Esmallquotation{\Equotation}
-
-% If we're given an argument, typeset it in bold with a colon after.
-\def\quotationlabel#1{%
-  \def\temp{#1}%
-  \ifx\temp\empty \else
-    {\bf #1: }%
-  \fi
-}
-
-% @indentedblock is like @quotation, but indents only on the left and
-% has no optional argument.
-% 
-\makedispenvdef{indentedblock}{\indentedblockstart}
-%
-\def\indentedblockstart{%
-  {\parskip=0pt \aboveenvbreak}% because \aboveenvbreak inserts \parskip
-  \parindent=0pt
-  %
-  % @cartouche defines \nonarrowing to inhibit narrowing at next level down.
-  \ifx\nonarrowing\relax
-    \advance\leftskip by \lispnarrowing
-    \exdentamount = \lispnarrowing
-  \else
-    \let\nonarrowing = \relax
-  \fi
-}
-
-% Keep a nonzero parskip for the environment, since we're doing normal filling.
-%
-\def\Eindentedblock{%
-  \par
-  {\parskip=0pt \afterenvbreak}%
-}
-\def\Esmallindentedblock{\Eindentedblock}
-
-
-% LaTeX-like @verbatim... at end verbatim and @verb{<char>...<char>}
-% If we want to allow any <char> as delimiter,
-% we need the curly braces so that makeinfo sees the @verb command, eg:
-% `@verbx...x' would look like the '@verbx' command.  --janneke at gnu.org
-%
-% [Knuth]: Donald Ervin Knuth, 1996.  The TeXbook.
-%
-% [Knuth] p.344; only we need to do the other characters Texinfo sets
-% active too.  Otherwise, they get lost as the first character on a
-% verbatim line.
-\def\dospecials{%
-  \do\ \do\\\do\{\do\}\do\$\do\&%
-  \do\#\do\^\do\^^K\do\_\do\^^A\do\%\do\~%
-  \do\<\do\>\do\|\do\@\do+\do\"%
-  % Don't do the quotes -- if we do, @set txicodequoteundirected and
-  % @set txicodequotebacktick will not have effect on @verb and
-  % @verbatim, and ?` and !` ligatures won't get disabled.
-  %\do\`\do\'%
-}
-%
-% [Knuth] p. 380
-\def\uncatcodespecials{%
-  \def\do##1{\catcode`##1=\other}\dospecials}
-%
-% Setup for the @verb command.
-%
-% Eight spaces for a tab
-\begingroup
-  \catcode`\^^I=\active
-  \gdef\tabeightspaces{\catcode`\^^I=\active\def^^I{\ \ \ \ \ \ \ \ }}
-\endgroup
-%
-\def\setupverb{%
-  \tt  % easiest (and conventionally used) font for verbatim
-  \def\par{\leavevmode\endgraf}%
-  \setupmarkupstyle{verb}%
-  \tabeightspaces
-  % Respect line breaks,
-  % print special symbols as themselves, and
-  % make each space count
-  % must do in this order:
-  \obeylines \uncatcodespecials \sepspaces
-}
-
-% Setup for the @verbatim environment
-%
-% Real tab expansion.
-\newdimen\tabw \setbox0=\hbox{\tt\space} \tabw=8\wd0 % tab amount
-%
-% We typeset each line of the verbatim in an \hbox, so we can handle
-% tabs.  The \global is in case the verbatim line starts with an accent,
-% or some other command that starts with a begin-group.  Otherwise, the
-% entire \verbbox would disappear at the corresponding end-group, before
-% it is typeset.  Meanwhile, we can't have nested verbatim commands
-% (can we?), so the \global won't be overwriting itself.
-\newbox\verbbox
-\def\starttabbox{\global\setbox\verbbox=\hbox\bgroup}
-%
-\begingroup
-  \catcode`\^^I=\active
-  \gdef\tabexpand{%
-    \catcode`\^^I=\active
-    \def^^I{\leavevmode\egroup
-      \dimen\verbbox=\wd\verbbox % the width so far, or since the previous tab
-      \divide\dimen\verbbox by\tabw
-      \multiply\dimen\verbbox by\tabw % compute previous multiple of \tabw
-      \advance\dimen\verbbox by\tabw  % advance to next multiple of \tabw
-      \wd\verbbox=\dimen\verbbox \box\verbbox \starttabbox
-    }%
-  }
-\endgroup
-
-% start the verbatim environment.
-\def\setupverbatim{%
-  \let\nonarrowing = t%
-  \nonfillstart
-  \tt % easiest (and conventionally used) font for verbatim
-  % The \leavevmode here is for blank lines.  Otherwise, we would
-  % never \starttabbox and the \egroup would end verbatim mode.
-  \def\par{\leavevmode\egroup\box\verbbox\endgraf}%
-  \tabexpand
-  \setupmarkupstyle{verbatim}%
-  % Respect line breaks,
-  % print special symbols as themselves, and
-  % make each space count.
-  % Must do in this order:
-  \obeylines \uncatcodespecials \sepspaces
-  \everypar{\starttabbox}%
-}
-
-% Do the @verb magic: verbatim text is quoted by unique
-% delimiter characters.  Before first delimiter expect a
-% right brace, after last delimiter expect closing brace:
-%
-%    \def\doverb'{'<char>#1<char>'}'{#1}
-%
-% [Knuth] p. 382; only eat outer {}
-\begingroup
-  \catcode`[=1\catcode`]=2\catcode`\{=\other\catcode`\}=\other
-  \gdef\doverb{#1[\def\next##1#1}[##1\endgroup]\next]
-\endgroup
-%
-\def\verb{\begingroup\setupverb\doverb}
-%
-%
-% Do the @verbatim magic: define the macro \doverbatim so that
-% the (first) argument ends when '@end verbatim' is reached, ie:
-%
-%     \def\doverbatim#1 at end verbatim{#1}
-%
-% For Texinfo it's a lot easier than for LaTeX,
-% because texinfo's \verbatim doesn't stop at '\end{verbatim}':
-% we need not redefine '\', '{' and '}'.
-%
-% Inspired by LaTeX's verbatim command set [latex.ltx]
-%
-\begingroup
-  \catcode`\ =\active
-  \obeylines %
-  % ignore everything up to the first ^^M, that's the newline at the end
-  % of the @verbatim input line itself.  Otherwise we get an extra blank
-  % line in the output.
-  \xdef\doverbatim#1^^M#2 at end verbatim{#2\noexpand\end\gobble verbatim}%
-  % We really want {...\end verbatim} in the body of the macro, but
-  % without the active space; thus we have to use \xdef and \gobble.
-\endgroup
-%
-\envdef\verbatim{%
-    \setupverbatim\doverbatim
-}
-\let\Everbatim = \afterenvbreak
-
-
-% @verbatiminclude FILE - insert text of file in verbatim environment.
-%
-\def\verbatiminclude{\parseargusing\filenamecatcodes\doverbatiminclude}
-%
-\def\doverbatiminclude#1{%
-  {%
-    \makevalueexpandable
-    \setupverbatim
-    {%
-      \indexnofonts       % Allow `@@' and other weird things in file names.
-      \wlog{texinfo.tex: doing @verbatiminclude of #1^^J}%
-      \edef\tmp{\noexpand\input #1 }
-      \expandafter
-    }\tmp
-    \afterenvbreak
-  }%
-}
-
-% @copying ... @end copying.
-% Save the text away for @insertcopying later.
-%
-% We save the uninterpreted tokens, rather than creating a box.
-% Saving the text in a box would be much easier, but then all the
-% typesetting commands (@smallbook, font changes, etc.) have to be done
-% beforehand -- and a) we want @copying to be done first in the source
-% file; b) letting users define the frontmatter in as flexible order as
-% possible is desirable.
-%
-\def\copying{\checkenv{}\begingroup\scanargctxt\docopying}
-\def\docopying#1 at end copying{\endgroup\def\copyingtext{#1}}
-%
-\def\insertcopying{%
-  \begingroup
-    \parindent = 0pt  % paragraph indentation looks wrong on title page
-    \scanexp\copyingtext
-  \endgroup
-}
-
-
-\message{defuns,}
-% @defun etc.
-
-\newskip\defbodyindent \defbodyindent=.4in
-\newskip\defargsindent \defargsindent=50pt
-\newskip\deflastargmargin \deflastargmargin=18pt
-\newcount\defunpenalty
-
-% Start the processing of @deffn:
-\def\startdefun{%
-  \ifnum\lastpenalty<10000
-    \medbreak
-    \defunpenalty=10003 % Will keep this @deffn together with the
-                        % following @def command, see below.
-  \else
-    % If there are two @def commands in a row, we'll have a \nobreak,
-    % which is there to keep the function description together with its
-    % header.  But if there's nothing but headers, we need to allow a
-    % break somewhere.  Check specifically for penalty 10002, inserted
-    % by \printdefunline, instead of 10000, since the sectioning
-    % commands also insert a nobreak penalty, and we don't want to allow
-    % a break between a section heading and a defun.
-    %
-    % As a further refinement, we avoid "club" headers by signalling
-    % with penalty of 10003 after the very first @deffn in the
-    % sequence (see above), and penalty of 10002 after any following
-    % @def command.
-    \ifnum\lastpenalty=10002 \penalty2000 \else \defunpenalty=10002 \fi
-    %
-    % Similarly, after a section heading, do not allow a break.
-    % But do insert the glue.
-    \medskip  % preceded by discardable penalty, so not a breakpoint
-  \fi
-  %
-  \parindent=0in
-  \advance\leftskip by \defbodyindent
-  \exdentamount=\defbodyindent
-}
-
-\def\dodefunx#1{%
-  % First, check whether we are in the right environment:
-  \checkenv#1%
-  %
-  % As above, allow line break if we have multiple x headers in a row.
-  % It's not a great place, though.
-  \ifnum\lastpenalty=10002 \penalty3000 \else \defunpenalty=10002 \fi
-  %
-  % And now, it's time to reuse the body of the original defun:
-  \expandafter\gobbledefun#1%
-}
-\def\gobbledefun#1\startdefun{}
-
-% \printdefunline \deffnheader{text}
-%
-\def\printdefunline#1#2{%
-  \begingroup
-    % call \deffnheader:
-    #1#2 \endheader
-    % common ending:
-    \interlinepenalty = 10000
-    \advance\rightskip by 0pt plus 1fil\relax
-    \endgraf
-    \nobreak\vskip -\parskip
-    \penalty\defunpenalty  % signal to \startdefun and \dodefunx
-    % Some of the @defun-type tags do not enable magic parentheses,
-    % rendering the following check redundant.  But we don't optimize.
-    \checkparencounts
-  \endgroup
-}
-
-\def\Edefun{\endgraf\medbreak}
-
-% \makedefun{deffn} creates \deffn, \deffnx and \Edeffn;
-% the only thing remaining is to define \deffnheader.
-%
-\def\makedefun#1{%
-  \expandafter\let\csname E#1\endcsname = \Edefun
-  \edef\temp{\noexpand\domakedefun
-    \makecsname{#1}\makecsname{#1x}\makecsname{#1header}}%
-  \temp
-}
-
-% \domakedefun \deffn \deffnx \deffnheader { (defn. of \deffnheader) }
-%
-% Define \deffn and \deffnx, without parameters.
-% \deffnheader has to be defined explicitly.
-%
-\def\domakedefun#1#2#3{%
-  \envdef#1{%
-    \startdefun
-    \doingtypefnfalse    % distinguish typed functions from all else
-    \parseargusing\activeparens{\printdefunline#3}%
-  }%
-  \def#2{\dodefunx#1}%
-  \def#3%
-}
-
-\newif\ifdoingtypefn       % doing typed function?
-\newif\ifrettypeownline    % typeset return type on its own line?
-
-% @deftypefnnewline on|off says whether the return type of typed functions
-% are printed on their own line.  This affects @deftypefn, @deftypefun,
-% @deftypeop, and @deftypemethod.
-% 
-\parseargdef\deftypefnnewline{%
-  \def\temp{#1}%
-  \ifx\temp\onword
-    \expandafter\let\csname SETtxideftypefnnl\endcsname
-      = \empty
-  \else\ifx\temp\offword
-    \expandafter\let\csname SETtxideftypefnnl\endcsname
-      = \relax
-  \else
-    \errhelp = \EMsimple
-    \errmessage{Unknown @txideftypefnnl value `\temp',
-                must be on|off}%
-  \fi\fi
-}
-
-% \dosubind {index}{topic}{subtopic}
-%
-% If SUBTOPIC is present, precede it with a space, and call \doind.
-% (At some time during the 20th century, this made a two-level entry in an 
-% index such as the operation index.  Nobody seemed to notice the change in 
-% behaviour though.)
-\def\dosubind#1#2#3{%
-  \def\thirdarg{#3}%
-  \ifx\thirdarg\empty
-    \doind{#1}{#2}%
-  \else
-    \doind{#1}{#2\space#3}%
-  \fi
-}
-
-% Untyped functions:
-
-% @deffn category name args
-\makedefun{deffn}{\deffngeneral{}}
-
-% @deffn category class name args
-\makedefun{defop}#1 {\defopon{#1\ \putwordon}}
-
-% \defopon {category on}class name args
-\def\defopon#1#2 {\deffngeneral{\putwordon\ \code{#2}}{#1\ \code{#2}} }
-
-% \deffngeneral {subind}category name args
-%
-\def\deffngeneral#1#2 #3 #4\endheader{%
-  \dosubind{fn}{\code{#3}}{#1}%
-  \defname{#2}{}{#3}\magicamp\defunargs{#4\unskip}%
-}
-
-% Typed functions:
-
-% @deftypefn category type name args
-\makedefun{deftypefn}{\deftypefngeneral{}}
-
-% @deftypeop category class type name args
-\makedefun{deftypeop}#1 {\deftypeopon{#1\ \putwordon}}
-
-% \deftypeopon {category on}class type name args
-\def\deftypeopon#1#2 {\deftypefngeneral{\putwordon\ \code{#2}}{#1\ \code{#2}} }
-
-% \deftypefngeneral {subind}category type name args
-%
-\def\deftypefngeneral#1#2 #3 #4 #5\endheader{%
-  \dosubind{fn}{\code{#4}}{#1}%
-  \doingtypefntrue
-  \defname{#2}{#3}{#4}\defunargs{#5\unskip}%
-}
-
-% Typed variables:
-
-% @deftypevr category type var args
-\makedefun{deftypevr}{\deftypecvgeneral{}}
-
-% @deftypecv category class type var args
-\makedefun{deftypecv}#1 {\deftypecvof{#1\ \putwordof}}
-
-% \deftypecvof {category of}class type var args
-\def\deftypecvof#1#2 {\deftypecvgeneral{\putwordof\ \code{#2}}{#1\ \code{#2}} }
-
-% \deftypecvgeneral {subind}category type var args
-%
-\def\deftypecvgeneral#1#2 #3 #4 #5\endheader{%
-  \dosubind{vr}{\code{#4}}{#1}%
-  \defname{#2}{#3}{#4}\defunargs{#5\unskip}%
-}
-
-% Untyped variables:
-
-% @defvr category var args
-\makedefun{defvr}#1 {\deftypevrheader{#1} {} }
-
-% @defcv category class var args
-\makedefun{defcv}#1 {\defcvof{#1\ \putwordof}}
-
-% \defcvof {category of}class var args
-\def\defcvof#1#2 {\deftypecvof{#1}#2 {} }
-
-% Types:
-
-% @deftp category name args
-\makedefun{deftp}#1 #2 #3\endheader{%
-  \doind{tp}{\code{#2}}%
-  \defname{#1}{}{#2}\defunargs{#3\unskip}%
-}
-
-% Remaining @defun-like shortcuts:
-\makedefun{defun}{\deffnheader{\putwordDeffunc} }
-\makedefun{defmac}{\deffnheader{\putwordDefmac} }
-\makedefun{defspec}{\deffnheader{\putwordDefspec} }
-\makedefun{deftypefun}{\deftypefnheader{\putwordDeffunc} }
-\makedefun{defvar}{\defvrheader{\putwordDefvar} }
-\makedefun{defopt}{\defvrheader{\putwordDefopt} }
-\makedefun{deftypevar}{\deftypevrheader{\putwordDefvar} }
-\makedefun{defmethod}{\defopon\putwordMethodon}
-\makedefun{deftypemethod}{\deftypeopon\putwordMethodon}
-\makedefun{defivar}{\defcvof\putwordInstanceVariableof}
-\makedefun{deftypeivar}{\deftypecvof\putwordInstanceVariableof}
-
-% \defname, which formats the name of the @def (not the args).
-% #1 is the category, such as "Function".
-% #2 is the return type, if any.
-% #3 is the function name.
-%
-% We are followed by (but not passed) the arguments, if any.
-%
-\def\defname#1#2#3{%
-  \par
-  % Get the values of \leftskip and \rightskip as they were outside the @def...
-  \advance\leftskip by -\defbodyindent
-  %
-  % Determine if we are typesetting the return type of a typed function
-  % on a line by itself.
-  \rettypeownlinefalse
-  \ifdoingtypefn  % doing a typed function specifically?
-    % then check user option for putting return type on its own line:
-    \expandafter\ifx\csname SETtxideftypefnnl\endcsname\relax \else
-      \rettypeownlinetrue
-    \fi
-  \fi
-  %
-  % How we'll format the category name.  Putting it in brackets helps
-  % distinguish it from the body text that may end up on the next line
-  % just below it.
-  \def\temp{#1}%
-  \setbox0=\hbox{\kern\deflastargmargin \ifx\temp\empty\else [\rm\temp]\fi}
-  %
-  % Figure out line sizes for the paragraph shape.  We'll always have at
-  % least two.
-  \tempnum = 2
-  %
-  % The first line needs space for \box0; but if \rightskip is nonzero,
-  % we need only space for the part of \box0 which exceeds it:
-  \dimen0=\hsize  \advance\dimen0 by -\wd0  \advance\dimen0 by \rightskip
-  %
-  % If doing a return type on its own line, we'll have another line.
-  \ifrettypeownline
-    \advance\tempnum by 1
-    \def\maybeshapeline{0in \hsize}%
-  \else
-    \def\maybeshapeline{}%
-  \fi
-  %
-  % The continuations:
-  \dimen2=\hsize  \advance\dimen2 by -\defargsindent
-  %
-  % The final paragraph shape:
-  \parshape \tempnum  0in \dimen0  \maybeshapeline  \defargsindent \dimen2
-  %
-  % Put the category name at the right margin.
-  \noindent
-  \hbox to 0pt{%
-    \hfil\box0 \kern-\hsize
-    % \hsize has to be shortened this way:
-    \kern\leftskip
-    % Intentionally do not respect \rightskip, since we need the space.
-  }%
-  %
-  % Allow all lines to be underfull without complaint:
-  \tolerance=10000 \hbadness=10000
-  \exdentamount=\defbodyindent
-  {%
-    % defun fonts. We use typewriter by default (used to be bold) because:
-    % . we're printing identifiers, they should be in tt in principle.
-    % . in languages with many accents, such as Czech or French, it's
-    %   common to leave accents off identifiers.  The result looks ok in
-    %   tt, but exceedingly strange in rm.
-    % . we don't want -- and --- to be treated as ligatures.
-    % . this still does not fix the ?` and !` ligatures, but so far no
-    %   one has made identifiers using them :).
-    \df \tt
-    \def\temp{#2}% text of the return type
-    \ifx\temp\empty\else
-      \tclose{\temp}% typeset the return type
-      \ifrettypeownline
-        % put return type on its own line; prohibit line break following:
-        \hfil\vadjust{\nobreak}\break  
-      \else
-        \space  % type on same line, so just followed by a space
-      \fi
-    \fi           % no return type
-    #3% output function name
-  }%
-  {\rm\enskip}% hskip 0.5 em of \rmfont
-  %
-  \boldbrax
-  % arguments will be output next, if any.
-}
-
-% Print arguments in slanted roman (not ttsl), inconsistently with using
-% tt for the name.  This is because literal text is sometimes needed in
-% the argument list (groff manual), and ttsl and tt are not very
-% distinguishable.  Prevent hyphenation at `-' chars.
-%
-\def\defunargs#1{%
-  % use sl by default (not ttsl),
-  % tt for the names.
-  \df \sl \hyphenchar\font=0
-  %
-  % On the other hand, if an argument has two dashes (for instance), we
-  % want a way to get ttsl.  We used to recommend @var for that, so
-  % leave the code in, but it's strange for @var to lead to typewriter.
-  % Nowadays we recommend @code, since the difference between a ttsl hyphen
-  % and a tt hyphen is pretty tiny.  @code also disables ?` !`.
-  \def\var##1{{\setupmarkupstyle{var}\ttslanted{##1}}}%
-  #1%
-  \sl\hyphenchar\font=45
-}
-
-% We want ()&[] to print specially on the defun line.
-%
-\def\activeparens{%
-  \catcode`\(=\active \catcode`\)=\active
-  \catcode`\[=\active \catcode`\]=\active
-  \catcode`\&=\active
-}
-
-% Make control sequences which act like normal parenthesis chars.
-\let\lparen = ( \let\rparen = )
-
-% Be sure that we always have a definition for `(', etc.  For example,
-% if the fn name has parens in it, \boldbrax will not be in effect yet,
-% so TeX would otherwise complain about undefined control sequence.
-{
-  \activeparens
-  \global\let(=\lparen \global\let)=\rparen
-  \global\let[=\lbrack \global\let]=\rbrack
-  \global\let& = \&
-
-  \gdef\boldbrax{\let(=\opnr\let)=\clnr\let[=\lbrb\let]=\rbrb}
-  \gdef\magicamp{\let&=\amprm}
-}
-\let\ampchar\&
-
-\newcount\parencount
-
-% If we encounter &foo, then turn on ()-hacking afterwards
-\newif\ifampseen
-\def\amprm#1 {\ampseentrue{\bf\&#1 }}
-
-\def\parenfont{%
-  \ifampseen
-    % At the first level, print parens in roman,
-    % otherwise use the default font.
-    \ifnum \parencount=1 \rm \fi
-  \else
-    % The \sf parens (in \boldbrax) actually are a little bolder than
-    % the contained text.  This is especially needed for [ and ] .
-    \sf
-  \fi
-}
-\def\infirstlevel#1{%
-  \ifampseen
-    \ifnum\parencount=1
-      #1%
-    \fi
-  \fi
-}
-\def\bfafterword#1 {#1 \bf}
-
-\def\opnr{%
-  \global\advance\parencount by 1
-  {\parenfont(}%
-  \infirstlevel \bfafterword
-}
-\def\clnr{%
-  {\parenfont)}%
-  \infirstlevel \sl
-  \global\advance\parencount by -1
-}
-
-\newcount\brackcount
-\def\lbrb{%
-  \global\advance\brackcount by 1
-  {\bf[}%
-}
-\def\rbrb{%
-  {\bf]}%
-  \global\advance\brackcount by -1
-}
-
-\def\checkparencounts{%
-  \ifnum\parencount=0 \else \badparencount \fi
-  \ifnum\brackcount=0 \else \badbrackcount \fi
-}
-% these should not use \errmessage; the glibc manual, at least, actually
-% has such constructs (when documenting function pointers).
-\def\badparencount{%
-  \message{Warning: unbalanced parentheses in @def...}%
-  \global\parencount=0
-}
-\def\badbrackcount{%
-  \message{Warning: unbalanced square brackets in @def...}%
-  \global\brackcount=0
-}
-
-
-\message{macros,}
-% @macro.
-
-% To do this right we need a feature of e-TeX, \scantokens,
-% which we arrange to emulate with a temporary file in ordinary TeX.
-\ifx\eTeXversion\thisisundefined
-  \newwrite\macscribble
-  \def\scantokens#1{%
-    \toks0={#1}%
-    \immediate\openout\macscribble=\jobname.tmp
-    \immediate\write\macscribble{\the\toks0}%
-    \immediate\closeout\macscribble
-    \input \jobname.tmp
-  }
-\fi
-
-% Used at the time of macro expansion.
-% Argument is macro body with arguments substituted
-\def\scanmacro#1{%
-  \newlinechar`\^^M
-  \def\xeatspaces{\eatspaces}%
-  %
-  % Process the macro body under the current catcode regime.
-  \scantokens{#1 at comment}%
-  %
-  % The \comment is to remove the \newlinechar added by \scantokens, and
-  % can be noticed by \parsearg.  Note \c isn't used because this means cedilla 
-  % in math mode.
-}
-
-% Used for copying and captions
-\def\scanexp#1{%
-  \expandafter\scanmacro\expandafter{#1}%
-}
-
-\newcount\paramno   % Count of parameters
-\newtoks\macname    % Macro name
-\newif\ifrecursive  % Is it recursive?
-
-% List of all defined macros in the form
-%    \commondummyword\macro1\commondummyword\macro2...
-% Currently is also contains all @aliases; the list can be split
-% if there is a need.
-\def\macrolist{}
-
-% Add the macro to \macrolist
-\def\addtomacrolist#1{\expandafter \addtomacrolistxxx \csname#1\endcsname}
-\def\addtomacrolistxxx#1{%
-     \toks0 = \expandafter{\macrolist\commondummyword#1}%
-     \xdef\macrolist{\the\toks0}%
-}
-
-% Utility routines.
-% This does \let #1 = #2, with \csnames; that is,
-%   \let \csname#1\endcsname = \csname#2\endcsname
-% (except of course we have to play expansion games).
-%
-\def\cslet#1#2{%
-  \expandafter\let
-  \csname#1\expandafter\endcsname
-  \csname#2\endcsname
-}
-
-% Trim leading and trailing spaces off a string.
-% Concepts from aro-bend problem 15 (see CTAN).
-{\catcode`\@=11
-\gdef\eatspaces #1{\expandafter\trim@\expandafter{#1 }}
-\gdef\trim@ #1{\trim@@ @#1 @ #1 @ @@}
-\gdef\trim@@ #1@ #2@ #3@@{\trim@@@\empty #2 @}
-\def\unbrace#1{#1}
-\unbrace{\gdef\trim@@@ #1 } #2@{#1}
-}
-
-% Trim a single trailing ^^M off a string.
-{\catcode`\^^M=\other \catcode`\Q=3%
-\gdef\eatcr #1{\eatcra #1Q^^MQ}%
-\gdef\eatcra#1^^MQ{\eatcrb#1Q}%
-\gdef\eatcrb#1Q#2Q{#1}%
-}
-
-% Macro bodies are absorbed as an argument in a context where
-% all characters are catcode 10, 11 or 12, except \ which is active
-% (as in normal texinfo). It is necessary to change the definition of \
-% to recognize macro arguments; this is the job of \mbodybackslash.
-%
-% Non-ASCII encodings make 8-bit characters active, so un-activate
-% them to avoid their expansion.  Must do this non-globally, to
-% confine the change to the current group.
-%
-% It's necessary to have hard CRs when the macro is executed. This is
-% done by making ^^M (\endlinechar) catcode 12 when reading the macro
-% body, and then making it the \newlinechar in \scanmacro.
-%
-\def\scanctxt{% used as subroutine
-  \catcode`\"=\other
-  \catcode`\+=\other
-  \catcode`\<=\other
-  \catcode`\>=\other
-  \catcode`\^=\other
-  \catcode`\_=\other
-  \catcode`\|=\other
-  \catcode`\~=\other
-  \passthroughcharstrue
-}
-
-\def\scanargctxt{% used for copying and captions, not macros.
-  \scanctxt
-  \catcode`\@=\other
-  \catcode`\\=\other
-  \catcode`\^^M=\other
-}
-
-\def\macrobodyctxt{% used for @macro definitions
-  \scanctxt
-  \catcode`\ =\other
-  \catcode`\@=\other
-  \catcode`\{=\other
-  \catcode`\}=\other
-  \catcode`\^^M=\other
-  \usembodybackslash
-}
-
-% Used when scanning braced macro arguments.  Note, however, that catcode
-% changes here are ineffectual if the macro invocation was nested inside
-% an argument to another Texinfo command.
-\def\macroargctxt{%
-  \scanctxt
-  \catcode`\ =\active
-  \catcode`\@=\other
-  \catcode`\^^M=\other
-  \catcode`\\=\active
-}
-
-\def\macrolineargctxt{% used for whole-line arguments without braces
-  \scanctxt
-  \catcode`\@=\other
-  \catcode`\{=\other
-  \catcode`\}=\other
-}
-
-% \mbodybackslash is the definition of \ in @macro bodies.
-% It maps \foo\ => \csname macarg.foo\endcsname => #N
-% where N is the macro parameter number.
-% We define \csname macarg.\endcsname to be \realbackslash, so
-% \\ in macro replacement text gets you a backslash.
-%
-{\catcode`@=0 @catcode`@\=@active
- @gdef at usembodybackslash{@let\=@mbodybackslash}
- @gdef at mbodybackslash#1\{@csname macarg.#1 at endcsname}
-}
-\expandafter\def\csname macarg.\endcsname{\realbackslash}
-
-\def\margbackslash#1{\char`\#1 }
-
-\def\macro{\recursivefalse\parsearg\macroxxx}
-\def\rmacro{\recursivetrue\parsearg\macroxxx}
-
-\def\macroxxx#1{%
-  \getargs{#1}% now \macname is the macname and \argl the arglist
-  \ifx\argl\empty       % no arguments
-     \paramno=0\relax
-  \else
-     \expandafter\parsemargdef \argl;%
-     \if\paramno>256\relax
-       \ifx\eTeXversion\thisisundefined
-         \errhelp = \EMsimple
-         \errmessage{You need eTeX to compile a file with macros with more than 256 arguments}
-       \fi
-     \fi
-  \fi
-  \if1\csname ismacro.\the\macname\endcsname
-     \message{Warning: redefining \the\macname}%
-  \else
-     \expandafter\ifx\csname \the\macname\endcsname \relax
-     \else \errmessage{Macro name \the\macname\space already defined}\fi
-     \global\cslet{macsave.\the\macname}{\the\macname}%
-     \global\expandafter\let\csname ismacro.\the\macname\endcsname=1%
-     \addtomacrolist{\the\macname}%
-  \fi
-  \begingroup \macrobodyctxt
-  \ifrecursive \expandafter\parsermacbody
-  \else \expandafter\parsemacbody
-  \fi}
-
-\parseargdef\unmacro{%
-  \if1\csname ismacro.#1\endcsname
-    \global\cslet{#1}{macsave.#1}%
-    \global\expandafter\let \csname ismacro.#1\endcsname=0%
-    % Remove the macro name from \macrolist:
-    \begingroup
-      \expandafter\let\csname#1\endcsname \relax
-      \let\commondummyword\unmacrodo
-      \xdef\macrolist{\macrolist}%
-    \endgroup
-  \else
-    \errmessage{Macro #1 not defined}%
-  \fi
-}
-
-% Called by \do from \dounmacro on each macro.  The idea is to omit any
-% macro definitions that have been changed to \relax.
-%
-\def\unmacrodo#1{%
-  \ifx #1\relax
-    % remove this
-  \else
-    \noexpand\commondummyword \noexpand#1%
-  \fi
-}
-
-% \getargs -- Parse the arguments to a @macro line.  Set \macname to
-% the name of the macro, and \argl to the braced argument list.
-\def\getargs#1{\getargsxxx#1{}}
-\def\getargsxxx#1#{\getmacname #1 \relax\getmacargs}
-\def\getmacname#1 #2\relax{\macname={#1}}
-\def\getmacargs#1{\def\argl{#1}}
-% This made use of the feature that if the last token of a
-% <parameter list> is #, then the preceding argument is delimited by
-% an opening brace, and that opening brace is not consumed.
-
-% Parse the optional {params} list to @macro or @rmacro.
-% Set \paramno to the number of arguments,
-% and \paramlist to a parameter text for the macro (e.g. #1,#2,#3 for a
-% three-param macro.)  Define \macarg.BLAH for each BLAH in the params
-% list to some hook where the argument is to be expanded.  If there are
-% less than 10 arguments that hook is to be replaced by ##N where N
-% is the position in that list, that is to say the macro arguments are to be
-% defined `a la TeX in the macro body.  
-%
-% That gets used by \mbodybackslash (above).
-%
-% If there are 10 or more arguments, a different technique is used: see
-% \parsemmanyargdef.
-%
-\def\parsemargdef#1;{%
-  \paramno=0\def\paramlist{}%
-  \let\hash\relax
-  % \hash is redefined to `#' later to get it into definitions
-  \let\xeatspaces\relax
-  \parsemargdefxxx#1,;,%
-  \ifnum\paramno<10\relax\else
-    \paramno0\relax
-    \parsemmanyargdef@@#1,;,% 10 or more arguments
-  \fi
-}
-\def\parsemargdefxxx#1,{%
-  \if#1;\let\next=\relax
-  \else \let\next=\parsemargdefxxx
-    \advance\paramno by 1
-    \expandafter\edef\csname macarg.\eatspaces{#1}\endcsname
-        {\xeatspaces{\hash\the\paramno}}%
-    \edef\paramlist{\paramlist\hash\the\paramno,}%
-  \fi\next}
-
-% \parsemacbody, \parsermacbody
-%
-% Read recursive and nonrecursive macro bodies. (They're different since
-% rec and nonrec macros end differently.)
-% 
-% We are in \macrobodyctxt, and the \xdef causes backslashshes in the macro 
-% body to be transformed.
-% Set \macrobody to the body of the macro, and call \defmacro.
-%
-{\catcode`\ =\other\long\gdef\parsemacbody#1 at end macro{%
-\xdef\macrobody{\eatcr{#1}}\endgroup\defmacro}}%
-{\catcode`\ =\other\long\gdef\parsermacbody#1 at end rmacro{%
-\xdef\macrobody{\eatcr{#1}}\endgroup\defmacro}}%
-
-% Make @ a letter, so that we can make private-to-Texinfo macro names.
-\edef\texiatcatcode{\the\catcode`\@}
-\catcode `@=11\relax
-
-%%%%%%%%%%%%%% Code for > 10 arguments only   %%%%%%%%%%%%%%%%%%
-
-% If there are 10 or more arguments, a different technique is used, where the
-% hook remains in the body, and when macro is to be expanded the body is
-% processed again to replace the arguments.
-%
-% In that case, the hook is \the\toks N-1, and we simply set \toks N-1 to the
-% argument N value and then \edef the body (nothing else will expand because of
-% the catcode regime under which the body was input).
-%
-% If you compile with TeX (not eTeX), and you have macros with 10 or more
-% arguments, no macro can have more than 256 arguments (else error).
-%
-% In case that there are 10 or more arguments we parse again the arguments
-% list to set new definitions for the \macarg.BLAH macros corresponding to
-% each BLAH argument. It was anyhow needed to parse already once this list
-% in order to count the arguments, and as macros with at most 9 arguments
-% are by far more frequent than macro with 10 or more arguments, defining
-% twice the \macarg.BLAH macros does not cost too much processing power.
-\def\parsemmanyargdef@@#1,{%
-  \if#1;\let\next=\relax
-  \else 
-    \let\next=\parsemmanyargdef@@
-    \edef\tempb{\eatspaces{#1}}%
-    \expandafter\def\expandafter\tempa
-       \expandafter{\csname macarg.\tempb\endcsname}%
-    % Note that we need some extra \noexpand\noexpand, this is because we
-    % don't want \the  to be expanded in the \parsermacbody  as it uses an
-    % \xdef .
-    \expandafter\edef\tempa
-      {\noexpand\noexpand\noexpand\the\toks\the\paramno}%
-    \advance\paramno by 1\relax
-  \fi\next}
-
-
-\let\endargs@\relax
-\let\nil@\relax
-\def\nilm@{\nil@}%
-\long\def\nillm@{\nil@}%
-
-% This macro is expanded during the Texinfo macro expansion, not during its
-% definition.  It gets all the arguments' values and assigns them to macros
-% macarg.ARGNAME
-%
-% #1 is the macro name
-% #2 is the list of argument names
-% #3 is the list of argument values
-\def\getargvals@#1#2#3{%
-  \def\macargdeflist@{}%
-  \def\saveparamlist@{#2}% Need to keep a copy for parameter expansion.
-  \def\paramlist{#2,\nil@}%
-  \def\macroname{#1}%
-  \begingroup
-  \macroargctxt
-  \def\argvaluelist{#3,\nil@}%
-  \def\@tempa{#3}%
-  \ifx\@tempa\empty
-    \setemptyargvalues@
-  \else
-    \getargvals@@
-  \fi
-}
-\def\getargvals@@{%
-  \ifx\paramlist\nilm@
-      % Some sanity check needed here that \argvaluelist is also empty.
-      \ifx\argvaluelist\nillm@
-      \else
-        \errhelp = \EMsimple
-        \errmessage{Too many arguments in macro `\macroname'!}%
-      \fi
-      \let\next\macargexpandinbody@
-  \else
-    \ifx\argvaluelist\nillm@
-       % No more arguments values passed to macro.  Set remaining named-arg
-       % macros to empty.
-       \let\next\setemptyargvalues@
-    \else
-      % pop current arg name into \@tempb
-      \def\@tempa##1{\pop@{\@tempb}{\paramlist}##1\endargs@}%
-      \expandafter\@tempa\expandafter{\paramlist}%
-       % pop current argument value into \@tempc
-      \def\@tempa##1{\longpop@{\@tempc}{\argvaluelist}##1\endargs@}%
-      \expandafter\@tempa\expandafter{\argvaluelist}%
-       % Here \@tempb is the current arg name and \@tempc is the current arg value.
-       % First place the new argument macro definition into \@tempd
-       \expandafter\macname\expandafter{\@tempc}%
-       \expandafter\let\csname macarg.\@tempb\endcsname\relax
-       \expandafter\def\expandafter\@tempe\expandafter{%
-         \csname macarg.\@tempb\endcsname}%
-       \edef\@tempd{\long\def\@tempe{\the\macname}}%
-       \push@\@tempd\macargdeflist@
-       \let\next\getargvals@@
-    \fi
-  \fi
-  \next
-}
-
-\def\push@#1#2{%
-  \expandafter\expandafter\expandafter\def
-  \expandafter\expandafter\expandafter#2%
-  \expandafter\expandafter\expandafter{%
-  \expandafter#1#2}%
-}
-
-% Replace arguments by their values in the macro body, and place the result
-% in macro \@tempa.
-% 
-\def\macvalstoargs@{%
-  %  To do this we use the property that token registers that are \the'ed
-  % within an \edef  expand only once. So we are going to place all argument
-  % values into respective token registers.
-  %
-  % First we save the token context, and initialize argument numbering.
-  \begingroup
-    \paramno0\relax
-    % Then, for each argument number #N, we place the corresponding argument
-    % value into a new token list register \toks#N
-    \expandafter\putargsintokens@\saveparamlist@,;,%
-    % Then, we expand the body so that argument are replaced by their
-    % values. The trick for values not to be expanded themselves is that they
-    % are within tokens and that tokens expand only once in an \edef .
-    \edef\@tempc{\csname mac.\macroname .body\endcsname}%
-    % Now we restore the token stack pointer to free the token list registers
-    % which we have used, but we make sure that expanded body is saved after
-    % group.
-    \expandafter
-  \endgroup
-  \expandafter\def\expandafter\@tempa\expandafter{\@tempc}%
-  }
-
-% Define the named-macro outside of this group and then close this group. 
-% 
-\def\macargexpandinbody@{% 
-  \expandafter
-  \endgroup
-  \macargdeflist@
-  % First the replace in body the macro arguments by their values, the result
-  % is in \@tempa .
-  \macvalstoargs@
-  % Then we point at the \norecurse or \gobble (for recursive) macro value
-  % with \@tempb .
-  \expandafter\let\expandafter\@tempb\csname mac.\macroname .recurse\endcsname
-  % Depending on whether it is recursive or not, we need some tailing
-  % \egroup .
-  \ifx\@tempb\gobble
-     \let\@tempc\relax
-  \else
-     \let\@tempc\egroup
-  \fi
-  % And now we do the real job:
-  \edef\@tempd{\noexpand\@tempb{\macroname}\noexpand\scanmacro{\@tempa}\@tempc}%
-  \@tempd
-}
-
-\def\putargsintokens@#1,{%
-  \if#1;\let\next\relax
-  \else
-    \let\next\putargsintokens@
-    % First we allocate the new token list register, and give it a temporary
-    % alias \@tempb .
-    \toksdef\@tempb\the\paramno
-    % Then we place the argument value into that token list register.
-    \expandafter\let\expandafter\@tempa\csname macarg.#1\endcsname
-    \expandafter\@tempb\expandafter{\@tempa}%
-    \advance\paramno by 1\relax
-  \fi
-  \next
-}
-
-% Trailing missing arguments are set to empty.
-% 
-\def\setemptyargvalues@{%
-  \ifx\paramlist\nilm@
-    \let\next\macargexpandinbody@
-  \else
-    \expandafter\setemptyargvaluesparser@\paramlist\endargs@
-    \let\next\setemptyargvalues@
-  \fi
-  \next
-}
-
-\def\setemptyargvaluesparser@#1,#2\endargs@{%
-  \expandafter\def\expandafter\@tempa\expandafter{%
-    \expandafter\def\csname macarg.#1\endcsname{}}%
-  \push@\@tempa\macargdeflist@
-  \def\paramlist{#2}%
-}
-
-% #1 is the element target macro
-% #2 is the list macro
-% #3,#4\endargs@ is the list value
-\def\pop@#1#2#3,#4\endargs@{%
-   \def#1{#3}%
-   \def#2{#4}%
-}
-\long\def\longpop@#1#2#3,#4\endargs@{%
-   \long\def#1{#3}%
-   \long\def#2{#4}%
-}
-
-
-%%%%%%%%%%%%%% End of code for > 10 arguments %%%%%%%%%%%%%%%%%%
-
-
-% This defines a Texinfo @macro or @rmacro, called by \parsemacbody.
-%    \macrobody has the body of the macro in it, with placeholders for
-% its parameters, looking like "\xeatspaces{\hash 1}".
-%    \paramno is the number of parameters
-%    \paramlist is a TeX parameter text, e.g. "#1,#2,#3,"
-% There are four cases: macros of zero, one, up to nine, and many arguments.
-% \xdef is used so that macro definitions will survive the file
-% they're defined in: @include reads the file inside a group.
-%
-\def\defmacro{%
-  \let\hash=##% convert placeholders to macro parameter chars
-  \ifnum\paramno=1
-    \def\xeatspaces##1{##1}%
-    % This removes the pair of braces around the argument.  We don't
-    % use \eatspaces, because this can cause ends of lines to be lost
-    % when the argument to \eatspaces is read, leading to line-based
-    % commands like "@itemize" not being read correctly.
-  \else
-    \let\xeatspaces\relax % suppress expansion
-  \fi
-  \ifcase\paramno
-  % 0
-    \expandafter\xdef\csname\the\macname\endcsname{%
-      \bgroup
-        \noexpand\spaceisspace
-        \noexpand\endlineisspace
-        \noexpand\expandafter % skip any whitespace after the macro name.
-        \expandafter\noexpand\csname\the\macname @@@\endcsname}%
-    \expandafter\xdef\csname\the\macname @@@\endcsname{%
-      \egroup
-      \noexpand\scanmacro{\macrobody}}%
-  \or % 1
-    \expandafter\xdef\csname\the\macname\endcsname{%
-       \bgroup
-       \noexpand\braceorline
-       \expandafter\noexpand\csname\the\macname @@@\endcsname}%
-    \expandafter\xdef\csname\the\macname @@@\endcsname##1{%
-      \egroup
-      \noexpand\scanmacro{\macrobody}%
-      }%
-  \else % at most 9
-    \ifnum\paramno<10\relax
-      % @MACNAME sets the context for reading the macro argument
-      % @MACNAME@@ gets the argument, processes backslashes and appends a 
-      % comma.
-      % @MACNAME@@@ removes braces surrounding the argument list.
-      % @MACNAME@@@@ scans the macro body with arguments substituted.
-      \expandafter\xdef\csname\the\macname\endcsname{%
-        \bgroup
-        \noexpand\expandafter  % This \expandafter skip any spaces after the
-        \noexpand\macroargctxt % macro before we change the catcode of space.
-        \noexpand\expandafter
-        \expandafter\noexpand\csname\the\macname @@\endcsname}%
-      \expandafter\xdef\csname\the\macname @@\endcsname##1{%
-          \noexpand\passargtomacro
-          \expandafter\noexpand\csname\the\macname @@@\endcsname{##1,}}%
-      \expandafter\xdef\csname\the\macname @@@\endcsname##1{%
-          \expandafter\noexpand\csname\the\macname @@@@\endcsname ##1}%
-      \expandafter\expandafter
-      \expandafter\xdef
-      \expandafter\expandafter
-        \csname\the\macname @@@@\endcsname\paramlist{%
-          \egroup\noexpand\scanmacro{\macrobody}}%
-    \else % 10 or more:
-      \expandafter\xdef\csname\the\macname\endcsname{%
-        \noexpand\getargvals@{\the\macname}{\argl}%
-      }%
-      \global\expandafter\let\csname mac.\the\macname .body\endcsname\macrobody
-      \global\expandafter\let\csname mac.\the\macname .recurse\endcsname\gobble
-    \fi
-  \fi}
-
-\catcode `\@\texiatcatcode\relax % end private-to-Texinfo catcodes
-
-\def\norecurse#1{\bgroup\cslet{#1}{macsave.#1}}
-
-
-%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
-%
-{\catcode`\@=0 \catcode`\\=13  % We need to manipulate \ so use @ as escape
- at catcode`@_=11  % private names
- at catcode`@!=11  % used as argument separator
-
-% \passargtomacro#1#2 -
-% Call #1 with a list of tokens #2, with any doubled backslashes in #2
-% compressed to one.
-%
-% This implementation works by expansion, and not execution (so we cannot use 
-% \def or similar).  This reduces the risk of this failing in contexts where 
-% complete expansion is done with no execution (for example, in writing out to 
-% an auxiliary file for an index entry).
-% 
-% State is kept in the input stream: the argument passed to
-% @look_ahead, @gobble_and_check_finish and @add_segment is
-%
-% THE_MACRO ARG_RESULT ! {PENDING_BS} NEXT_TOKEN  (... rest of input)
-%
-% where:
-% THE_MACRO - name of the macro we want to call
-% ARG_RESULT - argument list we build to pass to that macro
-% PENDING_BS - either a backslash or nothing
-% NEXT_TOKEN - used to look ahead in the input stream to see what's coming next
-
- at gdef@passargtomacro#1#2{%
-  @add_segment #1!{}@relax#2\@_finish\%
-}
- at gdef@_finish{@_finishx} @global at let@_finishx at relax
-
-% #1 - THE_MACRO ARG_RESULT
-% #2 - PENDING_BS
-% #3 - NEXT_TOKEN
-% #4 used to look ahead
-%
-% If the next token is not a backslash, process the rest of the argument; 
-% otherwise, remove the next token.
- at gdef@look_ahead#1!#2#3#4{%
-  @ifx#4\%
-   @expandafter at gobble_and_check_finish 
-  @else
-   @expandafter at add_segment
-  @fi#1!{#2}#4#4%
-}
-
-% #1 - THE_MACRO ARG_RESULT
-% #2 - PENDING_BS
-% #3 - NEXT_TOKEN
-% #4 should be a backslash, which is gobbled.
-% #5 looks ahead
-%
-% Double backslash found.  Add a single backslash, and look ahead.
- at gdef@gobble_and_check_finish#1!#2#3#4#5{%
-  @add_segment#1\!{}#5#5%
-}
-
- at gdef@is_fi{@fi}
-
-% #1 - THE_MACRO ARG_RESULT
-% #2 - PENDING_BS
-% #3 - NEXT_TOKEN
-% #4 is input stream until next backslash
-%
-% Input stream is either at the start of the argument, or just after a 
-% backslash sequence, either a lone backslash, or a doubled backslash.  
-% NEXT_TOKEN contains the first token in the input stream: if it is \finish, 
-% finish; otherwise, append to ARG_RESULT the segment of the argument up until
-% the next backslash.  PENDING_BACKSLASH contains a backslash to represent
-% a backslash just before the start of the input stream that has not been
-% added to ARG_RESULT.
- at gdef@add_segment#1!#2#3#4\{%
- at ifx#3 at _finish
-  @call_the_macro#1!%
- at else
-  % append the pending backslash to the result, followed by the next segment
-  @expandafter at is_fi@look_ahead#1#2#4!{\}@fi
-  % this @fi is discarded by @look_ahead.
-  % we can't get rid of it with \expandafter because we don't know how 
-  % long #4 is.
-}
-
-% #1 - THE_MACRO
-% #2 - ARG_RESULT
-% #3 discards the res of the conditional in @add_segment, and @is_fi ends the 
-% conditional.
- at gdef@call_the_macro#1#2!#3 at fi{@is_fi #1{#2}}
-
-}
-%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
-
-% \braceorline MAC is used for a one-argument macro MAC.  It checks
-% whether the next non-whitespace character is a {.  It sets the context
-% for reading the argument (slightly different in the two cases).  Then,
-% to read the argument, in the whole-line case, it then calls the regular
-% \parsearg MAC; in the lbrace case, it calls \passargtomacro MAC.
-% 
-\def\braceorline#1{\let\macnamexxx=#1\futurelet\nchar\braceorlinexxx}
-\def\braceorlinexxx{%
-  \ifx\nchar\bgroup
-    \macroargctxt
-    \expandafter\passargtomacro
-  \else
-    \macrolineargctxt\expandafter\parsearg
-  \fi \macnamexxx}
-
-
-% @alias.
-% We need some trickery to remove the optional spaces around the equal
-% sign.  Make them active and then expand them all to nothing.
-%
-\def\alias{\parseargusing\obeyspaces\aliasxxx}
-\def\aliasxxx #1{\aliasyyy#1\relax}
-\def\aliasyyy #1=#2\relax{%
-  {%
-    \expandafter\let\obeyedspace=\empty
-    \addtomacrolist{#1}%
-    \xdef\next{\global\let\makecsname{#1}=\makecsname{#2}}%
-  }%
-  \next
-}
-
-
-\message{cross references,}
-
-\newwrite\auxfile
-\newif\ifhavexrefs    % True if xref values are known.
-\newif\ifwarnedxrefs  % True if we warned once that they aren't known.
-
-% @inforef is relatively simple.
-\def\inforef #1{\inforefzzz #1,,,,**}
-\def\inforefzzz #1,#2,#3,#4**{%
-  \putwordSee{} \putwordInfo{} \putwordfile{} \file{\ignorespaces #3{}},
-  node \samp{\ignorespaces#1{}}}
-
-% @node's only job in TeX is to define \lastnode, which is used in
-% cross-references.  The @node line might or might not have commas, and
-% might or might not have spaces before the first comma, like:
-% @node foo , bar , ...
-% We don't want such trailing spaces in the node name.
-%
-\parseargdef\node{\checkenv{}\donode #1 ,\finishnodeparse}
-%
-% also remove a trailing comma, in case of something like this:
-% @node Help-Cross,  ,  , Cross-refs
-\def\donode#1 ,#2\finishnodeparse{\dodonode #1,\finishnodeparse}
-\def\dodonode#1,#2\finishnodeparse{\gdef\lastnode{#1}\omittopnode}
-
-% Used so that the @top node doesn't have to be wrapped in an @ifnottex
-% conditional.
-% \doignore goes to more effort to skip nested conditionals but we don't need 
-% that here.
-\def\omittopnode{%
-   \ifx\lastnode\wordTop
-   \expandafter\ignorenode\fi
-}
-\def\wordTop{Top}
-
-% Until the next @node or @bye command, divert output to a box that is not 
-% output.
-\def\ignorenode{\setbox\dummybox\vbox\bgroup\def\node{\egroup\node}%
-\ignorenodebye
-}
-
-{\let\bye\relax
-\gdef\ignorenodebye{\let\bye\ignorenodebyedef}
-\gdef\ignorenodebyedef{\egroup(`Top' node ignored)\bye}}
-% The redefinition of \bye here is because it is declared \outer
-
-\let\lastnode=\empty
-
-% Write a cross-reference definition for the current node.  #1 is the
-% type (Ynumbered, Yappendix, Ynothing).
-%
-\def\donoderef#1{%
-  \ifx\lastnode\empty\else
-    \setref{\lastnode}{#1}%
-    \global\let\lastnode=\empty
-  \fi
-}
-
-% @anchor{NAME} -- define xref target at arbitrary point.
-%
-\newcount\savesfregister
-%
-\def\savesf{\relax \ifhmode \savesfregister=\spacefactor \fi}
-\def\restoresf{\relax \ifhmode \spacefactor=\savesfregister \fi}
-\def\anchor#1{\savesf \setref{#1}{Ynothing}\restoresf \ignorespaces}
-
-% \setref{NAME}{SNT} defines a cross-reference point NAME (a node or an
-% anchor), which consists of three parts:
-% 1) NAME-title - the current sectioning name taken from \currentsection,
-%                 or the anchor name.
-% 2) NAME-snt   - section number and type, passed as the SNT arg, or
-%                 empty for anchors.
-% 3) NAME-pg    - the page number.
-%
-% This is called from \donoderef, \anchor, and \dofloat.  In the case of
-% floats, there is an additional part, which is not written here:
-% 4) NAME-lof   - the text as it should appear in a @listoffloats.
-%
-\def\setref#1#2{%
-  \pdfmkdest{#1}%
-  \iflinks
-    {%
-      \requireauxfile
-      \atdummies  % preserve commands, but don't expand them
-      % match definition in \xrdef, \refx, \xrefX.
-      \def\value##1{##1}%
-      \edef\writexrdef##1##2{%
-	\write\auxfile{@xrdef{#1-% #1 of \setref, expanded by the \edef
-	  ##1}{##2}}% these are parameters of \writexrdef
-      }%
-      \toks0 = \expandafter{\currentsection}%
-      \immediate \writexrdef{title}{\the\toks0 }%
-      \immediate \writexrdef{snt}{\csname #2\endcsname}% \Ynumbered etc.
-      \safewhatsit{\writexrdef{pg}{\folio}}% will be written later, at \shipout
-    }%
-  \fi
-}
-
-% @xrefautosectiontitle on|off says whether @section(ing) names are used
-% automatically in xrefs, if the third arg is not explicitly specified.
-% This was provided as a "secret" @set xref-automatic-section-title
-% variable, now it's official.
-% 
-\parseargdef\xrefautomaticsectiontitle{%
-  \def\temp{#1}%
-  \ifx\temp\onword
-    \expandafter\let\csname SETxref-automatic-section-title\endcsname
-      = \empty
-  \else\ifx\temp\offword
-    \expandafter\let\csname SETxref-automatic-section-title\endcsname
-      = \relax
-  \else
-    \errhelp = \EMsimple
-    \errmessage{Unknown @xrefautomaticsectiontitle value `\temp',
-                must be on|off}%
-  \fi\fi
-}
-
-% 

-% @xref, @pxref, and @ref generate cross-references.  For \xrefX, #1 is
-% the node name, #2 the name of the Info cross-reference, #3 the printed
-% node name, #4 the name of the Info file, #5 the name of the printed
-% manual.  All but the node name can be omitted.
-%
-\def\pxref{\putwordsee{} \xrefXX}
-\def\xref{\putwordSee{} \xrefXX}
-\def\ref{\xrefXX}
-
-\def\xrefXX#1{\def\xrefXXarg{#1}\futurelet\tokenafterxref\xrefXXX}
-\def\xrefXXX{\expandafter\xrefX\expandafter[\xrefXXarg,,,,,,,]}
-%
-\newbox\toprefbox
-\newbox\printedrefnamebox
-\newbox\infofilenamebox
-\newbox\printedmanualbox
-%
-\def\xrefX[#1,#2,#3,#4,#5,#6]{\begingroup
-  \unsepspaces
-  %
-  % Get args without leading/trailing spaces.
-  \def\printedrefname{\ignorespaces #3}%
-  \setbox\printedrefnamebox = \hbox{\printedrefname\unskip}%
-  %
-  \def\infofilename{\ignorespaces #4}%
-  \setbox\infofilenamebox = \hbox{\infofilename\unskip}%
-  %
-  \def\printedmanual{\ignorespaces #5}%
-  \setbox\printedmanualbox  = \hbox{\printedmanual\unskip}%
-  %
-  % If the printed reference name (arg #3) was not explicitly given in
-  % the @xref, figure out what we want to use.
-  \ifdim \wd\printedrefnamebox = 0pt
-    % No printed node name was explicitly given.
-    \expandafter\ifx\csname SETxref-automatic-section-title\endcsname \relax
-      % Not auto section-title: use node name inside the square brackets.
-      \def\printedrefname{\ignorespaces #1}%
-    \else
-      % Auto section-title: use chapter/section title inside
-      % the square brackets if we have it.
-      \ifdim \wd\printedmanualbox > 0pt
-        % It is in another manual, so we don't have it; use node name.
-        \def\printedrefname{\ignorespaces #1}%
-      \else
-        \ifhavexrefs
-          % We (should) know the real title if we have the xref values.
-          \def\printedrefname{\refx{#1-title}{}}%
-        \else
-          % Otherwise just copy the Info node name.
-          \def\printedrefname{\ignorespaces #1}%
-        \fi%
-      \fi
-    \fi
-  \fi
-  %
-  % Make link in pdf output.
-  \ifpdf
-    % For pdfTeX and LuaTeX
-    {\indexnofonts
-     \makevalueexpandable
-     \turnoffactive
-     % This expands tokens, so do it after making catcode changes, so _
-     % etc. don't get their TeX definitions.  This ignores all spaces in
-     % #4, including (wrongly) those in the middle of the filename.
-     \getfilename{#4}%
-     %
-     % This (wrongly) does not take account of leading or trailing
-     % spaces in #1, which should be ignored.
-     \setpdfdestname{#1}%
-     %
-     \ifx\pdfdestname\empty
-       \def\pdfdestname{Top}% no empty targets
-     \fi
-     %
-     \leavevmode
-     \startlink attr{/Border [0 0 0]}%
-     \ifnum\filenamelength>0
-       goto file{\the\filename.pdf} name{\pdfdestname}%
-     \else
-       goto name{\pdfmkpgn{\pdfdestname}}%
-     \fi
-    }%
-    \setcolor{\linkcolor}%
-  \else
-    \ifx\XeTeXrevision\thisisundefined
-    \else
-      % For XeTeX
-      {\indexnofonts
-       \makevalueexpandable
-       \turnoffactive
-       % This expands tokens, so do it after making catcode changes, so _
-       % etc. don't get their TeX definitions.  This ignores all spaces in
-       % #4, including (wrongly) those in the middle of the filename.
-       \getfilename{#4}%
-       %
-       % This (wrongly) does not take account of leading or trailing
-       % spaces in #1, which should be ignored.
-       \setpdfdestname{#1}%
-       %
-       \ifx\pdfdestname\empty
-         \def\pdfdestname{Top}% no empty targets
-       \fi
-       %
-       \leavevmode
-       \ifnum\filenamelength>0
-         % With default settings,
-         % XeTeX (xdvipdfmx) replaces link destination names with integers.
-         % In this case, the replaced destination names of
-         % remote PDFs are no longer known.  In order to avoid a replacement,
-         % you can use xdvipdfmx's command line option `-C 0x0010'.
-         % If you use XeTeX 0.99996+ (TeX Live 2016+),
-         % this command line option is no longer necessary
-         % because we can use the `dvipdfmx:config' special.
-         \special{pdf:bann << /Border [0 0 0] /Type /Annot /Subtype /Link /A
-           << /S /GoToR /F (\the\filename.pdf) /D (\pdfdestname) >> >>}%
-       \else
-         \special{pdf:bann << /Border [0 0 0] /Type /Annot /Subtype /Link /A
-           << /S /GoTo /D (\pdfdestname) >> >>}%
-       \fi
-      }%
-      \setcolor{\linkcolor}%
-    \fi
-  \fi
-  {%
-    % Have to otherify everything special to allow the \csname to
-    % include an _ in the xref name, etc.
-    \indexnofonts
-    \turnoffactive
-    \def\value##1{##1}%
-    \expandafter\global\expandafter\let\expandafter\Xthisreftitle
-      \csname XR#1-title\endcsname
-  }%
-  %
-  % Float references are printed completely differently: "Figure 1.2"
-  % instead of "[somenode], p.3".  \iffloat distinguishes them by
-  % \Xthisreftitle being set to a magic string.
-  \iffloat\Xthisreftitle
-    % If the user specified the print name (third arg) to the ref,
-    % print it instead of our usual "Figure 1.2".
-    \ifdim\wd\printedrefnamebox = 0pt
-      \refx{#1-snt}{}%
-    \else
-      \printedrefname
-    \fi
-    %
-    % If the user also gave the printed manual name (fifth arg), append
-    % "in MANUALNAME".
-    \ifdim \wd\printedmanualbox > 0pt
-      \space \putwordin{} \cite{\printedmanual}%
-    \fi
-  \else
-    % node/anchor (non-float) references.
-    % 
-    % If we use \unhbox to print the node names, TeX does not insert
-    % empty discretionaries after hyphens, which means that it will not
-    % find a line break at a hyphen in a node names.  Since some manuals
-    % are best written with fairly long node names, containing hyphens,
-    % this is a loss.  Therefore, we give the text of the node name
-    % again, so it is as if TeX is seeing it for the first time.
-    % 
-    \ifdim \wd\printedmanualbox > 0pt
-      % Cross-manual reference with a printed manual name.
-      % 
-      \crossmanualxref{\cite{\printedmanual\unskip}}%
-    %
-    \else\ifdim \wd\infofilenamebox > 0pt
-      % Cross-manual reference with only an info filename (arg 4), no
-      % printed manual name (arg 5).  This is essentially the same as
-      % the case above; we output the filename, since we have nothing else.
-      % 
-      \crossmanualxref{\code{\infofilename\unskip}}%
-    %
-    \else
-      % Reference within this manual.
-      %
-      % _ (for example) has to be the character _ for the purposes of the
-      % control sequence corresponding to the node, but it has to expand
-      % into the usual \leavevmode...\vrule stuff for purposes of
-      % printing. So we \turnoffactive for the \refx-snt, back on for the
-      % printing, back off for the \refx-pg.
-      {\turnoffactive
-       % Only output a following space if the -snt ref is nonempty; for
-       % @unnumbered and @anchor, it won't be.
-       \setbox2 = \hbox{\ignorespaces \refx{#1-snt}{}}%
-       \ifdim \wd2 > 0pt \refx{#1-snt}\space\fi
-      }%
-      % output the `[mynode]' via the macro below so it can be overridden.
-      \xrefprintnodename\printedrefname
-      %
-      % But we always want a comma and a space:
-      ,\space
-      %
-      % output the `page 3'.
-      \turnoffactive \putwordpage\tie\refx{#1-pg}{}%
-      % Add a , if xref followed by a space
-      \if\space\noexpand\tokenafterxref ,%
-      \else\ifx\	\tokenafterxref ,% @TAB
-      \else\ifx\*\tokenafterxref ,%   @*
-      \else\ifx\ \tokenafterxref ,%   @SPACE
-      \else\ifx\
-                \tokenafterxref ,%    @NL
-      \else\ifx\tie\tokenafterxref ,% @tie
-      \fi\fi\fi\fi\fi\fi
-    \fi\fi
-  \fi
-  \endlink
-\endgroup}
-
-% Output a cross-manual xref to #1.  Used just above (twice).
-% 
-% Only include the text "Section ``foo'' in" if the foo is neither
-% missing or Top.  Thus, @xref{,,,foo,The Foo Manual} outputs simply
-% "see The Foo Manual", the idea being to refer to the whole manual.
-% 
-% But, this being TeX, we can't easily compare our node name against the
-% string "Top" while ignoring the possible spaces before and after in
-% the input.  By adding the arbitrary 7sp below, we make it much less
-% likely that a real node name would have the same width as "Top" (e.g.,
-% in a monospaced font).  Hopefully it will never happen in practice.
-% 
-% For the same basic reason, we retypeset the "Top" at every
-% reference, since the current font is indeterminate.
-% 
-\def\crossmanualxref#1{%
-  \setbox\toprefbox = \hbox{Top\kern7sp}%
-  \setbox2 = \hbox{\ignorespaces \printedrefname \unskip \kern7sp}%
-  \ifdim \wd2 > 7sp  % nonempty?
-    \ifdim \wd2 = \wd\toprefbox \else  % same as Top?
-      \putwordSection{} ``\printedrefname'' \putwordin{}\space
-    \fi
-  \fi
-  #1%
-}
-
-% This macro is called from \xrefX for the `[nodename]' part of xref
-% output.  It's a separate macro only so it can be changed more easily,
-% since square brackets don't work well in some documents.  Particularly
-% one that Bob is working on :).
-%
-\def\xrefprintnodename#1{[#1]}
-
-% Things referred to by \setref.
-%
-\def\Ynothing{}
-\def\Yomitfromtoc{}
-\def\Ynumbered{%
-  \ifnum\secno=0
-    \putwordChapter at tie \the\chapno
-  \else \ifnum\subsecno=0
-    \putwordSection at tie \the\chapno.\the\secno
-  \else \ifnum\subsubsecno=0
-    \putwordSection at tie \the\chapno.\the\secno.\the\subsecno
-  \else
-    \putwordSection at tie \the\chapno.\the\secno.\the\subsecno.\the\subsubsecno
-  \fi\fi\fi
-}
-\def\Yappendix{%
-  \ifnum\secno=0
-     \putwordAppendix at tie @char\the\appendixno{}%
-  \else \ifnum\subsecno=0
-     \putwordSection at tie @char\the\appendixno.\the\secno
-  \else \ifnum\subsubsecno=0
-    \putwordSection at tie @char\the\appendixno.\the\secno.\the\subsecno
-  \else
-    \putwordSection at tie
-      @char\the\appendixno.\the\secno.\the\subsecno.\the\subsubsecno
-  \fi\fi\fi
-}
-
-% \refx{NAME}{SUFFIX} - reference a cross-reference string named NAME.  SUFFIX 
-% is output afterwards if non-empty.
-\def\refx#1#2{%
-  \requireauxfile
-  {%
-    \indexnofonts
-    \otherbackslash
-    \def\value##1{##1}%
-    \expandafter\global\expandafter\let\expandafter\thisrefX
-      \csname XR#1\endcsname
-  }%
-  \ifx\thisrefX\relax
-    % If not defined, say something at least.
-    \angleleft un\-de\-fined\angleright
-    \iflinks
-      \ifhavexrefs
-        {\toks0 = {#1}% avoid expansion of possibly-complex value
-         \message{\linenumber Undefined cross reference `\the\toks0'.}}%
-      \else
-        \ifwarnedxrefs\else
-          \global\warnedxrefstrue
-          \message{Cross reference values unknown; you must run TeX again.}%
-        \fi
-      \fi
-    \fi
-  \else
-    % It's defined, so just use it.
-    \thisrefX
-  \fi
-  #2% Output the suffix in any case.
-}
-
-% This is the macro invoked by entries in the aux file.  Define a control 
-% sequence for a cross-reference target (we prepend XR to the control sequence 
-% name to avoid collisions).  The value is the page number.  If this is a float 
-% type, we have more work to do.
-%
-\def\xrdef#1#2{%
-  {% Expand the node or anchor name to remove control sequences.
-   % \turnoffactive stops 8-bit characters being changed to commands
-   % like @'e.  \refx does the same to retrieve the value in the definition.
-    \indexnofonts
-    \turnoffactive
-    \def\value##1{##1}%
-    \xdef\safexrefname{#1}%
-  }%
-  %
-  \bgroup
-    \expandafter\gdef\csname XR\safexrefname\endcsname{#2}%
-  \egroup
-  % We put the \gdef inside a group to avoid the definitions building up on 
-  % TeX's save stack, which can cause it to run out of space for aux files with 
-  % thousands of lines.  \gdef doesn't use the save stack, but \csname does
-  % when it defines an unknown control sequence as \relax. 
-  %
-  % Was that xref control sequence that we just defined for a float?
-  \expandafter\iffloat\csname XR\safexrefname\endcsname
-    % it was a float, and we have the (safe) float type in \iffloattype.
-    \expandafter\let\expandafter\floatlist
-      \csname floatlist\iffloattype\endcsname
-    %
-    % Is this the first time we've seen this float type?
-    \expandafter\ifx\floatlist\relax
-      \toks0 = {\do}% yes, so just \do
-    \else
-      % had it before, so preserve previous elements in list.
-      \toks0 = \expandafter{\floatlist\do}%
-    \fi
-    %
-    % Remember this xref in the control sequence \floatlistFLOATTYPE,
-    % for later use in \listoffloats.
-    \expandafter\xdef\csname floatlist\iffloattype\endcsname{\the\toks0
-      {\safexrefname}}%
-  \fi
-}
-
-% If working on a large document in chapters, it is convenient to
-% be able to disable indexing, cross-referencing, and contents, for test runs.
-% This is done with @novalidate at the beginning of the file.
-%
-\newif\iflinks \linkstrue % by default we want the aux files.
-\let\novalidate = \linksfalse
-
-% Used when writing to the aux file, or when using data from it.
-\def\requireauxfile{%
-  \iflinks
-    \tryauxfile
-    % Open the new aux file.  TeX will close it automatically at exit.
-    \immediate\openout\auxfile=\jobname.aux
-  \fi
-  \global\let\requireauxfile=\relax   % Only do this once.
-}
-
-% Read the last existing aux file, if any.  No error if none exists.
-%
-\def\tryauxfile{%
-  \openin 1 \jobname.aux
-  \ifeof 1 \else
-    \readdatafile{aux}%
-    \global\havexrefstrue
-  \fi
-  \closein 1
-}
-
-\def\setupdatafile{%
-  \catcode`\^^@=\other
-  \catcode`\^^A=\other
-  \catcode`\^^B=\other
-  \catcode`\^^C=\other
-  \catcode`\^^D=\other
-  \catcode`\^^E=\other
-  \catcode`\^^F=\other
-  \catcode`\^^G=\other
-  \catcode`\^^H=\other
-  \catcode`\^^K=\other
-  \catcode`\^^L=\other
-  \catcode`\^^N=\other
-  \catcode`\^^P=\other
-  \catcode`\^^Q=\other
-  \catcode`\^^R=\other
-  \catcode`\^^S=\other
-  \catcode`\^^T=\other
-  \catcode`\^^U=\other
-  \catcode`\^^V=\other
-  \catcode`\^^W=\other
-  \catcode`\^^X=\other
-  \catcode`\^^Z=\other
-  \catcode`\^^[=\other
-  \catcode`\^^\=\other
-  \catcode`\^^]=\other
-  \catcode`\^^^=\other
-  \catcode`\^^_=\other
-  \catcode`\^=\other
-  %
-  % Special characters.  Should be turned off anyway, but...
-  \catcode`\~=\other
-  \catcode`\[=\other
-  \catcode`\]=\other
-  \catcode`\"=\other
-  \catcode`\_=\other
-  \catcode`\|=\other
-  \catcode`\<=\other
-  \catcode`\>=\other
-  \catcode`\$=\other
-  \catcode`\#=\other
-  \catcode`\&=\other
-  \catcode`\%=\other
-  \catcode`+=\other % avoid \+ for paranoia even though we've turned it off
-  %
-  \catcode`\\=\active
-  %
-  % @ is our escape character in .aux files, and we need braces.
-  \catcode`\{=1
-  \catcode`\}=2
-  \catcode`\@=0
-}
-
-\def\readdatafile#1{%
-\begingroup
-  \setupdatafile
-  \input\jobname.#1
-\endgroup}
-
-
-\message{insertions,}
-% including footnotes.
-
-\newcount \footnoteno
-
-% The trailing space in the following definition for supereject is
-% vital for proper filling; pages come out unaligned when you do a
-% pagealignmacro call if that space before the closing brace is
-% removed. (Generally, numeric constants should always be followed by a
-% space to prevent strange expansion errors.)
-\def\supereject{\par\penalty -20000\footnoteno =0 }
-
-% @footnotestyle is meaningful for Info output only.
-\let\footnotestyle=\comment
-
-{\catcode `\@=11
-%
-% Auto-number footnotes.  Otherwise like plain.
-\gdef\footnote{%
-  \global\advance\footnoteno by \@ne
-  \edef\thisfootno{$^{\the\footnoteno}$}%
-  %
-  % In case the footnote comes at the end of a sentence, preserve the
-  % extra spacing after we do the footnote number.
-  \let\@sf\empty
-  \ifhmode\edef\@sf{\spacefactor\the\spacefactor}\ptexslash\fi
-  %
-  % Remove inadvertent blank space before typesetting the footnote number.
-  \unskip
-  \thisfootno\@sf
-  \dofootnote
-}%
-
-% Don't bother with the trickery in plain.tex to not require the
-% footnote text as a parameter.  Our footnotes don't need to be so general.
-%
-% Oh yes, they do; otherwise, @ifset (and anything else that uses
-% \parseargline) fails inside footnotes because the tokens are fixed when
-% the footnote is read.  --karl, 16nov96.
-%
-\gdef\dofootnote{%
-  \insert\footins\bgroup
-  %
-  % Nested footnotes are not supported in TeX, that would take a lot
-  % more work.  (\startsavinginserts does not suffice.)
-  \let\footnote=\errfootnotenest
-  %
-  % We want to typeset this text as a normal paragraph, even if the
-  % footnote reference occurs in (for example) a display environment.
-  % So reset some parameters.
-  \hsize=\txipagewidth
-  \interlinepenalty\interfootnotelinepenalty
-  \splittopskip\ht\strutbox % top baseline for broken footnotes
-  \splitmaxdepth\dp\strutbox
-  \floatingpenalty\@MM
-  \leftskip\z at skip
-  \rightskip\z at skip
-  \spaceskip\z at skip
-  \xspaceskip\z at skip
-  \parindent\defaultparindent
-  %
-  \smallfonts \rm
-  %
-  % Because we use hanging indentation in footnotes, a @noindent appears
-  % to exdent this text, so make it be a no-op.  makeinfo does not use
-  % hanging indentation so @noindent can still be needed within footnote
-  % text after an @example or the like (not that this is good style).
-  \let\noindent = \relax
-  %
-  % Hang the footnote text off the number.  Use \everypar in case the
-  % footnote extends for more than one paragraph.
-  \everypar = {\hang}%
-  \textindent{\thisfootno}%
-  %
-  % Don't crash into the line above the footnote text.  Since this
-  % expands into a box, it must come within the paragraph, lest it
-  % provide a place where TeX can split the footnote.
-  \footstrut
-  %
-  % Invoke rest of plain TeX footnote routine.
-  \futurelet\next\fo at t
-}
-}%end \catcode `\@=11
-
-\def\errfootnotenest{%
-  \errhelp=\EMsimple
-  \errmessage{Nested footnotes not supported in texinfo.tex,
-    even though they work in makeinfo; sorry}
-}
-
-\def\errfootnoteheading{%
-  \errhelp=\EMsimple
-  \errmessage{Footnotes in chapters, sections, etc., are not supported}
-}
-
-% In case a @footnote appears in a vbox, save the footnote text and create
-% the real \insert just after the vbox finished.  Otherwise, the insertion
-% would be lost.
-% Similarly, if a @footnote appears inside an alignment, save the footnote
-% text to a box and make the \insert when a row of the table is finished.
-% And the same can be done for other insert classes.  --kasal, 16nov03.
-%
-% Replace the \insert primitive by a cheating macro.
-% Deeper inside, just make sure that the saved insertions are not spilled
-% out prematurely.
-%
-\def\startsavinginserts{%
-  \ifx \insert\ptexinsert
-    \let\insert\saveinsert
-  \else
-    \let\checkinserts\relax
-  \fi
-}
-
-% This \insert replacement works for both \insert\footins{foo} and
-% \insert\footins\bgroup foo\egroup, but it doesn't work for \insert27{foo}.
-%
-\def\saveinsert#1{%
-  \edef\next{\noexpand\savetobox \makeSAVEname#1}%
-  \afterassignment\next
-  % swallow the left brace
-  \let\temp =
-}
-\def\makeSAVEname#1{\makecsname{SAVE\expandafter\gobble\string#1}}
-\def\savetobox#1{\global\setbox#1 = \vbox\bgroup \unvbox#1}
-
-\def\checksaveins#1{\ifvoid#1\else \placesaveins#1\fi}
-
-\def\placesaveins#1{%
-  \ptexinsert \csname\expandafter\gobblesave\string#1\endcsname
-    {\box#1}%
-}
-
-% eat @SAVE -- beware, all of them have catcode \other:
-{
-  \def\dospecials{\do S\do A\do V\do E} \uncatcodespecials  %  ;-)
-  \gdef\gobblesave @SAVE{}
-}
-
-% initialization:
-\def\newsaveins #1{%
-  \edef\next{\noexpand\newsaveinsX \makeSAVEname#1}%
-  \next
-}
-\def\newsaveinsX #1{%
-  \csname newbox\endcsname #1%
-  \expandafter\def\expandafter\checkinserts\expandafter{\checkinserts
-    \checksaveins #1}%
-}
-
-% initialize:
-\let\checkinserts\empty
-\newsaveins\footins
-\newsaveins\margin
-
-
-% @image.  We use the macros from epsf.tex to support this.
-% If epsf.tex is not installed and @image is used, we complain.
-%
-% Check for and read epsf.tex up front.  If we read it only at @image
-% time, we might be inside a group, and then its definitions would get
-% undone and the next image would fail.
-\openin 1 = epsf.tex
-\ifeof 1 \else
-  % Do not bother showing banner with epsf.tex v2.7k (available in
-  % doc/epsf.tex and on ctan).
-  \def\epsfannounce{\toks0 = }%
-  \input epsf.tex
-\fi
-\closein 1
-%
-% We will only complain once about lack of epsf.tex.
-\newif\ifwarnednoepsf
-\newhelp\noepsfhelp{epsf.tex must be installed for images to
-  work.  It is also included in the Texinfo distribution, or you can get
-  it from https://ctan.org/texarchive/macros/texinfo/texinfo/doc/epsf.tex.}
-%
-\def\image#1{%
-  \ifx\epsfbox\thisisundefined
-    \ifwarnednoepsf \else
-      \errhelp = \noepsfhelp
-      \errmessage{epsf.tex not found, images will be ignored}%
-      \global\warnednoepsftrue
-    \fi
-  \else
-    \imagexxx #1,,,,,\finish
-  \fi
-}
-%
-% Arguments to @image:
-% #1 is (mandatory) image filename; we tack on .eps extension.
-% #2 is (optional) width, #3 is (optional) height.
-% #4 is (ignored optional) html alt text.
-% #5 is (ignored optional) extension.
-% #6 is just the usual extra ignored arg for parsing stuff.
-\newif\ifimagevmode
-\def\imagexxx#1,#2,#3,#4,#5,#6\finish{\begingroup
-  \catcode`\^^M = 5     % in case we're inside an example
-  \normalturnoffactive  % allow _ et al. in names
-  \def\xprocessmacroarg{\eatspaces}% in case we are being used via a macro
-  % If the image is by itself, center it.
-  \ifvmode
-    \imagevmodetrue
-  \else \ifx\centersub\centerV
-    % for @center @image, we need a vbox so we can have our vertical space
-    \imagevmodetrue
-    \vbox\bgroup % vbox has better behavior than vtop herev
-  \fi\fi
-  %
-  \ifimagevmode
-    \nobreak\medskip
-    % Usually we'll have text after the image which will insert
-    % \parskip glue, so insert it here too to equalize the space
-    % above and below.
-    \nobreak\vskip\parskip
-    \nobreak
-  \fi
-  %
-  % Leave vertical mode so that indentation from an enclosing
-  %  environment such as @quotation is respected.
-  % However, if we're at the top level, we don't want the
-  %  normal paragraph indentation.
-  % On the other hand, if we are in the case of @center @image, we don't
-  %  want to start a paragraph, which will create a hsize-width box and
-  %  eradicate the centering.
-  \ifx\centersub\centerV\else \noindent \fi
-  %
-  % Output the image.
-  \ifpdf
-    % For pdfTeX and LuaTeX <= 0.80
-    \dopdfimage{#1}{#2}{#3}%
-  \else
-    \ifx\XeTeXrevision\thisisundefined
-      % For epsf.tex
-      % \epsfbox itself resets \epsf?size at each figure.
-      \setbox0 = \hbox{\ignorespaces #2}%
-        \ifdim\wd0 > 0pt \epsfxsize=#2\relax \fi
-      \setbox0 = \hbox{\ignorespaces #3}%
-        \ifdim\wd0 > 0pt \epsfysize=#3\relax \fi
-      \epsfbox{#1.eps}%
-    \else
-      % For XeTeX
-      \doxeteximage{#1}{#2}{#3}%
-    \fi
-  \fi
-  %
-  \ifimagevmode
-    \medskip  % space after a standalone image
-  \fi  
-  \ifx\centersub\centerV \egroup \fi
-\endgroup}
-
-
-% @float FLOATTYPE,LABEL,LOC ... @end float for displayed figures, tables,
-% etc.  We don't actually implement floating yet, we always include the
-% float "here".  But it seemed the best name for the future.
-%
-\envparseargdef\float{\eatcommaspace\eatcommaspace\dofloat#1, , ,\finish}
-
-% There may be a space before second and/or third parameter; delete it.
-\def\eatcommaspace#1, {#1,}
-
-% #1 is the optional FLOATTYPE, the text label for this float, typically
-% "Figure", "Table", "Example", etc.  Can't contain commas.  If omitted,
-% this float will not be numbered and cannot be referred to.
-%
-% #2 is the optional xref label.  Also must be present for the float to
-% be referable.
-%
-% #3 is the optional positioning argument; for now, it is ignored.  It
-% will somehow specify the positions allowed to float to (here, top, bottom).
-%
-% We keep a separate counter for each FLOATTYPE, which we reset at each
-% chapter-level command.
-\let\resetallfloatnos=\empty
-%
-\def\dofloat#1,#2,#3,#4\finish{%
-  \let\thiscaption=\empty
-  \let\thisshortcaption=\empty
-  %
-  % don't lose footnotes inside @float.
-  %
-  % BEWARE: when the floats start float, we have to issue warning whenever an
-  % insert appears inside a float which could possibly float. --kasal, 26may04
-  %
-  \startsavinginserts
-  %
-  % We can't be used inside a paragraph.
-  \par
-  %
-  \vtop\bgroup
-    \def\floattype{#1}%
-    \def\floatlabel{#2}%
-    \def\floatloc{#3}% we do nothing with this yet.
-    %
-    \ifx\floattype\empty
-      \let\safefloattype=\empty
-    \else
-      {%
-        % the floattype might have accents or other special characters,
-        % but we need to use it in a control sequence name.
-        \indexnofonts
-        \turnoffactive
-        \xdef\safefloattype{\floattype}%
-      }%
-    \fi
-    %
-    % If label is given but no type, we handle that as the empty type.
-    \ifx\floatlabel\empty \else
-      % We want each FLOATTYPE to be numbered separately (Figure 1,
-      % Table 1, Figure 2, ...).  (And if no label, no number.)
-      %
-      \expandafter\getfloatno\csname\safefloattype floatno\endcsname
-      \global\advance\floatno by 1
-      %
-      {%
-        % This magic value for \currentsection is output by \setref as the
-        % XREFLABEL-title value.  \xrefX uses it to distinguish float
-        % labels (which have a completely different output format) from
-        % node and anchor labels.  And \xrdef uses it to construct the
-        % lists of floats.
-        %
-        \edef\currentsection{\floatmagic=\safefloattype}%
-        \setref{\floatlabel}{Yfloat}%
-      }%
-    \fi
-    %
-    % start with \parskip glue, I guess.
-    \vskip\parskip
-    %
-    % Don't suppress indentation if a float happens to start a section.
-    \restorefirstparagraphindent
-}
-
-% we have these possibilities:
-% @float Foo,lbl & @caption{Cap}: Foo 1.1: Cap
-% @float Foo,lbl & no caption:    Foo 1.1
-% @float Foo & @caption{Cap}:     Foo: Cap
-% @float Foo & no caption:        Foo
-% @float ,lbl & Caption{Cap}:     1.1: Cap
-% @float ,lbl & no caption:       1.1
-% @float & @caption{Cap}:         Cap
-% @float & no caption:
-%
-\def\Efloat{%
-    \let\floatident = \empty
-    %
-    % In all cases, if we have a float type, it comes first.
-    \ifx\floattype\empty \else \def\floatident{\floattype}\fi
-    %
-    % If we have an xref label, the number comes next.
-    \ifx\floatlabel\empty \else
-      \ifx\floattype\empty \else % if also had float type, need tie first.
-        \appendtomacro\floatident{\tie}%
-      \fi
-      % the number.
-      \appendtomacro\floatident{\chaplevelprefix\the\floatno}%
-    \fi
-    %
-    % Start the printed caption with what we've constructed in
-    % \floatident, but keep it separate; we need \floatident again.
-    \let\captionline = \floatident
-    %
-    \ifx\thiscaption\empty \else
-      \ifx\floatident\empty \else
-        \appendtomacro\captionline{: }% had ident, so need a colon between
-      \fi
-      %
-      % caption text.
-      \appendtomacro\captionline{\scanexp\thiscaption}%
-    \fi
-    %
-    % If we have anything to print, print it, with space before.
-    % Eventually this needs to become an \insert.
-    \ifx\captionline\empty \else
-      \vskip.5\parskip
-      \captionline
-      %
-      % Space below caption.
-      \vskip\parskip
-    \fi
-    %
-    % If have an xref label, write the list of floats info.  Do this
-    % after the caption, to avoid chance of it being a breakpoint.
-    \ifx\floatlabel\empty \else
-      % Write the text that goes in the lof to the aux file as
-      % \floatlabel-lof.  Besides \floatident, we include the short
-      % caption if specified, else the full caption if specified, else nothing.
-      {%
-        \requireauxfile
-        \atdummies
-        %
-        \ifx\thisshortcaption\empty
-          \def\gtemp{\thiscaption}%
-        \else
-          \def\gtemp{\thisshortcaption}%
-        \fi
-        \immediate\write\auxfile{@xrdef{\floatlabel-lof}{\floatident
-          \ifx\gtemp\empty \else : \gtemp \fi}}%
-      }%
-    \fi
-  \egroup  % end of \vtop
-  %
-  \checkinserts
-}
-
-% Append the tokens #2 to the definition of macro #1, not expanding either.
-%
-\def\appendtomacro#1#2{%
-  \expandafter\def\expandafter#1\expandafter{#1#2}%
-}
-
-% @caption, @shortcaption
-%
-\def\caption{\docaption\thiscaption}
-\def\shortcaption{\docaption\thisshortcaption}
-\def\docaption{\checkenv\float \bgroup\scanargctxt\defcaption}
-\def\defcaption#1#2{\egroup \def#1{#2}}
-
-% The parameter is the control sequence identifying the counter we are
-% going to use.  Create it if it doesn't exist and assign it to \floatno.
-\def\getfloatno#1{%
-  \ifx#1\relax
-      % Haven't seen this figure type before.
-      \csname newcount\endcsname #1%
-      %
-      % Remember to reset this floatno at the next chap.
-      \expandafter\gdef\expandafter\resetallfloatnos
-        \expandafter{\resetallfloatnos #1=0 }%
-  \fi
-  \let\floatno#1%
-}
-
-% \setref calls this to get the XREFLABEL-snt value.  We want an @xref
-% to the FLOATLABEL to expand to "Figure 3.1".  We call \setref when we
-% first read the @float command.
-%
-\def\Yfloat{\floattype at tie \chaplevelprefix\the\floatno}%
-
-% Magic string used for the XREFLABEL-title value, so \xrefX can
-% distinguish floats from other xref types.
-\def\floatmagic{!!float!!}
-
-% #1 is the control sequence we are passed; we expand into a conditional
-% which is true if #1 represents a float ref.  That is, the magic
-% \currentsection value which we \setref above.
-%
-\def\iffloat#1{\expandafter\doiffloat#1==\finish}
-%
-% #1 is (maybe) the \floatmagic string.  If so, #2 will be the
-% (safe) float type for this float.  We set \iffloattype to #2.
-%
-\def\doiffloat#1=#2=#3\finish{%
-  \def\temp{#1}%
-  \def\iffloattype{#2}%
-  \ifx\temp\floatmagic
-}
-
-% @listoffloats FLOATTYPE - print a list of floats like a table of contents.
-%
-\parseargdef\listoffloats{%
-  \def\floattype{#1}% floattype
-  {%
-    % the floattype might have accents or other special characters,
-    % but we need to use it in a control sequence name.
-    \indexnofonts
-    \turnoffactive
-    \xdef\safefloattype{\floattype}%
-  }%
-  %
-  % \xrdef saves the floats as a \do-list in \floatlistSAFEFLOATTYPE.
-  \expandafter\ifx\csname floatlist\safefloattype\endcsname \relax
-    \ifhavexrefs
-      % if the user said @listoffloats foo but never @float foo.
-      \message{\linenumber No `\safefloattype' floats to list.}%
-    \fi
-  \else
-    \begingroup
-      \leftskip=\tocindent  % indent these entries like a toc
-      \let\do=\listoffloatsdo
-      \csname floatlist\safefloattype\endcsname
-    \endgroup
-  \fi
-}
-
-% This is called on each entry in a list of floats.  We're passed the
-% xref label, in the form LABEL-title, which is how we save it in the
-% aux file.  We strip off the -title and look up \XRLABEL-lof, which
-% has the text we're supposed to typeset here.
-%
-% Figures without xref labels will not be included in the list (since
-% they won't appear in the aux file).
-%
-\def\listoffloatsdo#1{\listoffloatsdoentry#1\finish}
-\def\listoffloatsdoentry#1-title\finish{{%
-  % Can't fully expand XR#1-lof because it can contain anything.  Just
-  % pass the control sequence.  On the other hand, XR#1-pg is just the
-  % page number, and we want to fully expand that so we can get a link
-  % in pdf output.
-  \toksA = \expandafter{\csname XR#1-lof\endcsname}%
-  %
-  % use the same \entry macro we use to generate the TOC and index.
-  \edef\writeentry{\noexpand\entry{\the\toksA}{\csname XR#1-pg\endcsname}}%
-  \writeentry
-}}
-
-
-\message{localization,}
-
-% For single-language documents, @documentlanguage is usually given very
-% early, just after @documentencoding.  Single argument is the language
-% (de) or locale (de_DE) abbreviation.
-%
-{
-  \catcode`\_ = \active
-  \globaldefs=1
-\parseargdef\documentlanguage{%
-  \tex % read txi-??.tex file in plain TeX.
-    % Read the file by the name they passed if it exists.
-    \let_ = \normalunderscore  % normal _ character for filename test
-    \openin 1 txi-#1.tex
-    \ifeof 1
-      \documentlanguagetrywithoutunderscore #1_\finish
-    \else
-      \globaldefs = 1  % everything in the txi-LL files needs to persist
-      \input txi-#1.tex
-    \fi
-    \closein 1
-  \endgroup % end raw TeX
-}
-%
-% If they passed de_DE, and txi-de_DE.tex doesn't exist,
-% try txi-de.tex.
-%
-\gdef\documentlanguagetrywithoutunderscore#1_#2\finish{%
-  \openin 1 txi-#1.tex
-  \ifeof 1
-    \errhelp = \nolanghelp
-    \errmessage{Cannot read language file txi-#1.tex}%
-  \else
-    \globaldefs = 1  % everything in the txi-LL files needs to persist
-    \input txi-#1.tex
-  \fi
-  \closein 1
-}
-}% end of special _ catcode
-%
-\newhelp\nolanghelp{The given language definition file cannot be found or
-is empty.  Maybe you need to install it?  Putting it in the current
-directory should work if nowhere else does.}
-
-% This macro is called from txi-??.tex files; the first argument is the
-% \language name to set (without the "\lang@" prefix), the second and
-% third args are \{left,right}hyphenmin.
-%
-% The language names to pass are determined when the format is built.
-% See the etex.log file created at that time, e.g.,
-% /usr/local/texlive/2008/texmf-var/web2c/pdftex/etex.log.
-%
-% With TeX Live 2008, etex now includes hyphenation patterns for all
-% available languages.  This means we can support hyphenation in
-% Texinfo, at least to some extent.  (This still doesn't solve the
-% accented characters problem.)
-%
-\catcode`@=11
-\def\txisetlanguage#1#2#3{%
-  % do not set the language if the name is undefined in the current TeX.
-  \expandafter\ifx\csname lang@#1\endcsname \relax
-    \message{no patterns for #1}%
-  \else
-    \global\language = \csname lang@#1\endcsname
-  \fi
-  % but there is no harm in adjusting the hyphenmin values regardless.
-  \global\lefthyphenmin = #2\relax
-  \global\righthyphenmin = #3\relax
-}
-
-% XeTeX and LuaTeX can handle Unicode natively.
-% Their default I/O uses UTF-8 sequences instead of a byte-wise operation.
-% Other TeX engines' I/O (pdfTeX, etc.) is byte-wise.
-%
-\newif\iftxinativeunicodecapable
-\newif\iftxiusebytewiseio
-
-\ifx\XeTeXrevision\thisisundefined
-  \ifx\luatexversion\thisisundefined
-    \txinativeunicodecapablefalse
-    \txiusebytewiseiotrue
-  \else
-    \txinativeunicodecapabletrue
-    \txiusebytewiseiofalse
-  \fi
-\else
-  \txinativeunicodecapabletrue
-  \txiusebytewiseiofalse
-\fi
-
-% Set I/O by bytes instead of UTF-8 sequence for XeTeX and LuaTex
-% for non-UTF-8 (byte-wise) encodings.
-%
-\def\setbytewiseio{%
-  \ifx\XeTeXrevision\thisisundefined
-  \else
-    \XeTeXdefaultencoding "bytes"  % For subsequent files to be read
-    \XeTeXinputencoding "bytes"  % For document root file
-    % Unfortunately, there seems to be no corresponding XeTeX command for
-    % output encoding.  This is a problem for auxiliary index and TOC files.
-    % The only solution would be perhaps to write out @U{...} sequences in
-    % place of non-ASCII characters.
-  \fi
-
-  \ifx\luatexversion\thisisundefined
-  \else
-    \directlua{
-    local utf8_char, byte, gsub = unicode.utf8.char, string.byte, string.gsub
-    local function convert_char (char)
-      return utf8_char(byte(char))
-    end
-
-    local function convert_line (line)
-      return gsub(line, ".", convert_char)
-    end
-
-    callback.register("process_input_buffer", convert_line)
-
-    local function convert_line_out (line)
-      local line_out = ""
-      for c in string.utfvalues(line) do
-         line_out = line_out .. string.char(c)
-      end
-      return line_out
-    end
-
-    callback.register("process_output_buffer", convert_line_out)
-    }
-  \fi
-
-  \txiusebytewiseiotrue
-}
-
-
-% Helpers for encodings.
-% Set the catcode of characters 128 through 255 to the specified number.
-%
-\def\setnonasciicharscatcode#1{%
-   \count255=128
-   \loop\ifnum\count255<256
-      \global\catcode\count255=#1\relax
-      \advance\count255 by 1
-   \repeat
-}
-
-\def\setnonasciicharscatcodenonglobal#1{%
-   \count255=128
-   \loop\ifnum\count255<256
-      \catcode\count255=#1\relax
-      \advance\count255 by 1
-   \repeat
-}
-
-% @documentencoding sets the definition of non-ASCII characters
-% according to the specified encoding.
-%
-\def\documentencoding{\parseargusing\filenamecatcodes\documentencodingzzz}
-\def\documentencodingzzz#1{%
-  %
-  % Encoding being declared for the document.
-  \def\declaredencoding{\csname #1.enc\endcsname}%
-  %
-  % Supported encodings: names converted to tokens in order to be able
-  % to compare them with \ifx.
-  \def\ascii{\csname US-ASCII.enc\endcsname}%
-  \def\latnine{\csname ISO-8859-15.enc\endcsname}%
-  \def\latone{\csname ISO-8859-1.enc\endcsname}%
-  \def\lattwo{\csname ISO-8859-2.enc\endcsname}%
-  \def\utfeight{\csname UTF-8.enc\endcsname}%
-  %
-  \ifx \declaredencoding \ascii
-     \asciichardefs
-  %
-  \else \ifx \declaredencoding \lattwo
-     \iftxinativeunicodecapable
-       \setbytewiseio
-     \fi
-     \setnonasciicharscatcode\active
-     \lattwochardefs
-  %
-  \else \ifx \declaredencoding \latone
-     \iftxinativeunicodecapable
-       \setbytewiseio
-     \fi
-     \setnonasciicharscatcode\active
-     \latonechardefs
-  %
-  \else \ifx \declaredencoding \latnine
-     \iftxinativeunicodecapable
-       \setbytewiseio
-     \fi
-     \setnonasciicharscatcode\active
-     \latninechardefs
-  %
-  \else \ifx \declaredencoding \utfeight
-     \iftxinativeunicodecapable
-       % For native Unicode handling (XeTeX and LuaTeX)
-       \nativeunicodechardefs
-     \else
-       % For treating UTF-8 as byte sequences (TeX, eTeX and pdfTeX)
-       \setnonasciicharscatcode\active
-       % since we already invoked \utfeightchardefs at the top level
-       % (below), do not re-invoke it, otherwise our check for duplicated
-       % definitions gets triggered.  Making non-ascii chars active is
-       % sufficient.
-     \fi
-  %
-  \else
-    \message{Ignoring unknown document encoding: #1.}%
-  %
-  \fi % utfeight
-  \fi % latnine
-  \fi % latone
-  \fi % lattwo
-  \fi % ascii
-  %
-  \ifx\XeTeXrevision\thisisundefined
-  \else
-    \ifx \declaredencoding \utfeight
-    \else
-      \ifx \declaredencoding \ascii
-      \else
-        \message{Warning: XeTeX with non-UTF-8 encodings cannot handle %
-        non-ASCII characters in auxiliary files.}%
-      \fi
-    \fi
-  \fi
-}
-
-% emacs-page
-% A message to be logged when using a character that isn't available
-% the default font encoding (OT1).
-%
-\def\missingcharmsg#1{\message{Character missing, sorry: #1.}}
-
-% Take account of \c (plain) vs. \, (Texinfo) difference.
-\def\cedilla#1{\ifx\c\ptexc\c{#1}\else\,{#1}\fi}
-
-% First, make active non-ASCII characters in order for them to be
-% correctly categorized when TeX reads the replacement text of
-% macros containing the character definitions.
-\setnonasciicharscatcode\active
-%
-
-\def\gdefchar#1#2{%
-\gdef#1{%
-   \ifpassthroughchars
-     \string#1%
-   \else
-     #2%
-   \fi
-}}
-
-% Latin1 (ISO-8859-1) character definitions.
-\def\latonechardefs{%
-  \gdefchar^^a0{\tie}
-  \gdefchar^^a1{\exclamdown}
-  \gdefchar^^a2{{\tcfont \char162}} % cent
-  \gdefchar^^a3{\pounds{}}
-  \gdefchar^^a4{{\tcfont \char164}} % currency
-  \gdefchar^^a5{{\tcfont \char165}} % yen
-  \gdefchar^^a6{{\tcfont \char166}} % broken bar
-  \gdefchar^^a7{\S}
-  \gdefchar^^a8{\"{}}
-  \gdefchar^^a9{\copyright{}}
-  \gdefchar^^aa{\ordf}
-  \gdefchar^^ab{\guillemetleft{}}
-  \gdefchar^^ac{\ensuremath\lnot}
-  \gdefchar^^ad{\-}
-  \gdefchar^^ae{\registeredsymbol{}}
-  \gdefchar^^af{\={}}
-  %
-  \gdefchar^^b0{\textdegree}
-  \gdefchar^^b1{$\pm$}
-  \gdefchar^^b2{$^2$}
-  \gdefchar^^b3{$^3$}
-  \gdefchar^^b4{\'{}}
-  \gdefchar^^b5{$\mu$}
-  \gdefchar^^b6{\P}
-  \gdefchar^^b7{\ensuremath\cdot}
-  \gdefchar^^b8{\cedilla\ }
-  \gdefchar^^b9{$^1$}
-  \gdefchar^^ba{\ordm}
-  \gdefchar^^bb{\guillemetright{}}
-  \gdefchar^^bc{$1\over4$}
-  \gdefchar^^bd{$1\over2$}
-  \gdefchar^^be{$3\over4$}
-  \gdefchar^^bf{\questiondown}
-  %
-  \gdefchar^^c0{\`A}
-  \gdefchar^^c1{\'A}
-  \gdefchar^^c2{\^A}
-  \gdefchar^^c3{\~A}
-  \gdefchar^^c4{\"A}
-  \gdefchar^^c5{\ringaccent A}
-  \gdefchar^^c6{\AE}
-  \gdefchar^^c7{\cedilla C}
-  \gdefchar^^c8{\`E}
-  \gdefchar^^c9{\'E}
-  \gdefchar^^ca{\^E}
-  \gdefchar^^cb{\"E}
-  \gdefchar^^cc{\`I}
-  \gdefchar^^cd{\'I}
-  \gdefchar^^ce{\^I}
-  \gdefchar^^cf{\"I}
-  %
-  \gdefchar^^d0{\DH}
-  \gdefchar^^d1{\~N}
-  \gdefchar^^d2{\`O}
-  \gdefchar^^d3{\'O}
-  \gdefchar^^d4{\^O}
-  \gdefchar^^d5{\~O}
-  \gdefchar^^d6{\"O}
-  \gdefchar^^d7{$\times$}
-  \gdefchar^^d8{\O}
-  \gdefchar^^d9{\`U}
-  \gdefchar^^da{\'U}
-  \gdefchar^^db{\^U}
-  \gdefchar^^dc{\"U}
-  \gdefchar^^dd{\'Y}
-  \gdefchar^^de{\TH}
-  \gdefchar^^df{\ss}
-  %
-  \gdefchar^^e0{\`a}
-  \gdefchar^^e1{\'a}
-  \gdefchar^^e2{\^a}
-  \gdefchar^^e3{\~a}
-  \gdefchar^^e4{\"a}
-  \gdefchar^^e5{\ringaccent a}
-  \gdefchar^^e6{\ae}
-  \gdefchar^^e7{\cedilla c}
-  \gdefchar^^e8{\`e}
-  \gdefchar^^e9{\'e}
-  \gdefchar^^ea{\^e}
-  \gdefchar^^eb{\"e}
-  \gdefchar^^ec{\`{\dotless i}}
-  \gdefchar^^ed{\'{\dotless i}}
-  \gdefchar^^ee{\^{\dotless i}}
-  \gdefchar^^ef{\"{\dotless i}}
-  %
-  \gdefchar^^f0{\dh}
-  \gdefchar^^f1{\~n}
-  \gdefchar^^f2{\`o}
-  \gdefchar^^f3{\'o}
-  \gdefchar^^f4{\^o}
-  \gdefchar^^f5{\~o}
-  \gdefchar^^f6{\"o}
-  \gdefchar^^f7{$\div$}
-  \gdefchar^^f8{\o}
-  \gdefchar^^f9{\`u}
-  \gdefchar^^fa{\'u}
-  \gdefchar^^fb{\^u}
-  \gdefchar^^fc{\"u}
-  \gdefchar^^fd{\'y}
-  \gdefchar^^fe{\th}
-  \gdefchar^^ff{\"y}
-}
-
-% Latin9 (ISO-8859-15) encoding character definitions.
-\def\latninechardefs{%
-  % Encoding is almost identical to Latin1.
-  \latonechardefs
-  %
-  \gdefchar^^a4{\euro{}}
-  \gdefchar^^a6{\v S}
-  \gdefchar^^a8{\v s}
-  \gdefchar^^b4{\v Z}
-  \gdefchar^^b8{\v z}
-  \gdefchar^^bc{\OE}
-  \gdefchar^^bd{\oe}
-  \gdefchar^^be{\"Y}
-}
-
-% Latin2 (ISO-8859-2) character definitions.
-\def\lattwochardefs{%
-  \gdefchar^^a0{\tie}
-  \gdefchar^^a1{\ogonek{A}}
-  \gdefchar^^a2{\u{}}
-  \gdefchar^^a3{\L}
-  \gdefchar^^a4{\missingcharmsg{CURRENCY SIGN}}
-  \gdefchar^^a5{\v L}
-  \gdefchar^^a6{\'S}
-  \gdefchar^^a7{\S}
-  \gdefchar^^a8{\"{}}
-  \gdefchar^^a9{\v S}
-  \gdefchar^^aa{\cedilla S}
-  \gdefchar^^ab{\v T}
-  \gdefchar^^ac{\'Z}
-  \gdefchar^^ad{\-}
-  \gdefchar^^ae{\v Z}
-  \gdefchar^^af{\dotaccent Z}
-  %
-  \gdefchar^^b0{\textdegree{}}
-  \gdefchar^^b1{\ogonek{a}}
-  \gdefchar^^b2{\ogonek{ }}
-  \gdefchar^^b3{\l}
-  \gdefchar^^b4{\'{}}
-  \gdefchar^^b5{\v l}
-  \gdefchar^^b6{\'s}
-  \gdefchar^^b7{\v{}}
-  \gdefchar^^b8{\cedilla\ }
-  \gdefchar^^b9{\v s}
-  \gdefchar^^ba{\cedilla s}
-  \gdefchar^^bb{\v t}
-  \gdefchar^^bc{\'z}
-  \gdefchar^^bd{\H{}}
-  \gdefchar^^be{\v z}
-  \gdefchar^^bf{\dotaccent z}
-  %
-  \gdefchar^^c0{\'R}
-  \gdefchar^^c1{\'A}
-  \gdefchar^^c2{\^A}
-  \gdefchar^^c3{\u A}
-  \gdefchar^^c4{\"A}
-  \gdefchar^^c5{\'L}
-  \gdefchar^^c6{\'C}
-  \gdefchar^^c7{\cedilla C}
-  \gdefchar^^c8{\v C}
-  \gdefchar^^c9{\'E}
-  \gdefchar^^ca{\ogonek{E}}
-  \gdefchar^^cb{\"E}
-  \gdefchar^^cc{\v E}
-  \gdefchar^^cd{\'I}
-  \gdefchar^^ce{\^I}
-  \gdefchar^^cf{\v D}
-  %
-  \gdefchar^^d0{\DH}
-  \gdefchar^^d1{\'N}
-  \gdefchar^^d2{\v N}
-  \gdefchar^^d3{\'O}
-  \gdefchar^^d4{\^O}
-  \gdefchar^^d5{\H O}
-  \gdefchar^^d6{\"O}
-  \gdefchar^^d7{$\times$}
-  \gdefchar^^d8{\v R}
-  \gdefchar^^d9{\ringaccent U}
-  \gdefchar^^da{\'U}
-  \gdefchar^^db{\H U}
-  \gdefchar^^dc{\"U}
-  \gdefchar^^dd{\'Y}
-  \gdefchar^^de{\cedilla T}
-  \gdefchar^^df{\ss}
-  %
-  \gdefchar^^e0{\'r}
-  \gdefchar^^e1{\'a}
-  \gdefchar^^e2{\^a}
-  \gdefchar^^e3{\u a}
-  \gdefchar^^e4{\"a}
-  \gdefchar^^e5{\'l}
-  \gdefchar^^e6{\'c}
-  \gdefchar^^e7{\cedilla c}
-  \gdefchar^^e8{\v c}
-  \gdefchar^^e9{\'e}
-  \gdefchar^^ea{\ogonek{e}}
-  \gdefchar^^eb{\"e}
-  \gdefchar^^ec{\v e}
-  \gdefchar^^ed{\'{\dotless{i}}}
-  \gdefchar^^ee{\^{\dotless{i}}}
-  \gdefchar^^ef{\v d}
-  %
-  \gdefchar^^f0{\dh}
-  \gdefchar^^f1{\'n}
-  \gdefchar^^f2{\v n}
-  \gdefchar^^f3{\'o}
-  \gdefchar^^f4{\^o}
-  \gdefchar^^f5{\H o}
-  \gdefchar^^f6{\"o}
-  \gdefchar^^f7{$\div$}
-  \gdefchar^^f8{\v r}
-  \gdefchar^^f9{\ringaccent u}
-  \gdefchar^^fa{\'u}
-  \gdefchar^^fb{\H u}
-  \gdefchar^^fc{\"u}
-  \gdefchar^^fd{\'y}
-  \gdefchar^^fe{\cedilla t}
-  \gdefchar^^ff{\dotaccent{}}
-}
-
-% UTF-8 character definitions.
-%
-% This code to support UTF-8 is based on LaTeX's utf8.def, with some
-% changes for Texinfo conventions.  It is included here under the GPL by
-% permission from Frank Mittelbach and the LaTeX team.
-%
-\newcount\countUTFx
-\newcount\countUTFy
-\newcount\countUTFz
-
-\gdef\UTFviiiTwoOctets#1#2{\expandafter
-   \UTFviiiDefined\csname u8:#1\string #2\endcsname}
-%
-\gdef\UTFviiiThreeOctets#1#2#3{\expandafter
-   \UTFviiiDefined\csname u8:#1\string #2\string #3\endcsname}
-%
-\gdef\UTFviiiFourOctets#1#2#3#4{\expandafter
-   \UTFviiiDefined\csname u8:#1\string #2\string #3\string #4\endcsname}
-
-\gdef\UTFviiiDefined#1{%
-  \ifx #1\relax
-    \message{\linenumber Unicode char \string #1 not defined for Texinfo}%
-  \else
-    \expandafter #1%
-  \fi
-}
-
-% Give non-ASCII bytes the active definitions for processing UTF-8 sequences
-\begingroup
-  \catcode`\~13
-  \catcode`\$12
-  \catcode`\"12
-
-  % Loop from \countUTFx to \countUTFy, performing \UTFviiiTmp
-  % substituting ~ and $ with a character token of that value.
-  \def\UTFviiiLoop{%
-    \global\catcode\countUTFx\active
-    \uccode`\~\countUTFx
-    \uccode`\$\countUTFx
-    \uppercase\expandafter{\UTFviiiTmp}%
-    \advance\countUTFx by 1
-    \ifnum\countUTFx < \countUTFy
-      \expandafter\UTFviiiLoop
-    \fi}
-
-  % For bytes other than the first in a UTF-8 sequence.  Not expected to
-  % be expanded except when writing to auxiliary files.
-  \countUTFx = "80
-  \countUTFy = "C2
-  \def\UTFviiiTmp{%
-    \gdef~{%
-        \ifpassthroughchars $\fi}}%
-  \UTFviiiLoop
-
-  \countUTFx = "C2
-  \countUTFy = "E0
-  \def\UTFviiiTmp{%
-    \gdef~{%
-        \ifpassthroughchars $%
-        \else\expandafter\UTFviiiTwoOctets\expandafter$\fi}}%
-  \UTFviiiLoop
-
-  \countUTFx = "E0
-  \countUTFy = "F0
-  \def\UTFviiiTmp{%
-    \gdef~{%
-        \ifpassthroughchars $%
-        \else\expandafter\UTFviiiThreeOctets\expandafter$\fi}}%
-  \UTFviiiLoop
-
-  \countUTFx = "F0
-  \countUTFy = "F4
-  \def\UTFviiiTmp{%
-    \gdef~{%
-        \ifpassthroughchars $%
-        \else\expandafter\UTFviiiFourOctets\expandafter$\fi
-        }}%
-  \UTFviiiLoop
-\endgroup
-
-\def\globallet{\global\let} % save some \expandafter's below
-
-% @U{xxxx} to produce U+xxxx, if we support it.
-\def\U#1{%
-  \expandafter\ifx\csname uni:#1\endcsname \relax
-    \iftxinativeunicodecapable
-      % All Unicode characters can be used if native Unicode handling is
-      % active.  However, if the font does not have the glyph,
-      % letters are missing.
-      \begingroup
-        \uccode`\.="#1\relax
-        \uppercase{.}
-      \endgroup
-    \else
-      \errhelp = \EMsimple	
-      \errmessage{Unicode character U+#1 not supported, sorry}%
-    \fi
-  \else
-    \csname uni:#1\endcsname
-  \fi
-}
-
-% These macros are used here to construct the name of a control
-% sequence to be defined.
-\def\UTFviiiTwoOctetsName#1#2{%
-  \csname u8:#1\string #2\endcsname}%
-\def\UTFviiiThreeOctetsName#1#2#3{%
-  \csname u8:#1\string #2\string #3\endcsname}%
-\def\UTFviiiFourOctetsName#1#2#3#4{%
-  \csname u8:#1\string #2\string #3\string #4\endcsname}%
-
-% For UTF-8 byte sequences (TeX, e-TeX and pdfTeX),
-% provide a definition macro to replace a Unicode character;
-% this gets used by the @U command
-%
-\begingroup
-  \catcode`\"=12
-  \catcode`\<=12
-  \catcode`\.=12
-  \catcode`\,=12
-  \catcode`\;=12
-  \catcode`\!=12
-  \catcode`\~=13
-  \gdef\DeclareUnicodeCharacterUTFviii#1#2{%
-    \countUTFz = "#1\relax
-    \begingroup
-      \parseXMLCharref
-    
-      % Give \u8:... its definition.  The sequence of seven \expandafter's
-      % expands after the \gdef three times, e.g.
-      %
-      % 1.  \UTFviiTwoOctetsName B1 B2
-      % 2.  \csname u8:B1 \string B2 \endcsname
-      % 3.  \u8: B1 B2  (a single control sequence token)
-      %
-      \expandafter\expandafter
-      \expandafter\expandafter
-      \expandafter\expandafter
-      \expandafter\gdef       \UTFviiiTmp{#2}%
-      % 
-      \expandafter\ifx\csname uni:#1\endcsname \relax \else
-       \message{Internal error, already defined: #1}%
-      \fi
-      %
-      % define an additional control sequence for this code point.
-      \expandafter\globallet\csname uni:#1\endcsname \UTFviiiTmp
-    \endgroup}
-  %
-  % Given the value in \countUTFz as a Unicode code point, set \UTFviiiTmp
-  % to the corresponding UTF-8 sequence.
-  \gdef\parseXMLCharref{%
-    \ifnum\countUTFz < "A0\relax
-      \errhelp = \EMsimple
-      \errmessage{Cannot define Unicode char value < 00A0}%
-    \else\ifnum\countUTFz < "800\relax
-      \parseUTFviiiA,%
-      \parseUTFviiiB C\UTFviiiTwoOctetsName.,%
-    \else\ifnum\countUTFz < "10000\relax
-      \parseUTFviiiA;%
-      \parseUTFviiiA,%
-      \parseUTFviiiB E\UTFviiiThreeOctetsName.{,;}%
-    \else
-      \parseUTFviiiA;%
-      \parseUTFviiiA,%
-      \parseUTFviiiA!%
-      \parseUTFviiiB F\UTFviiiFourOctetsName.{!,;}%
-    \fi\fi\fi
-  }
-
-  % Extract a byte from the end of the UTF-8 representation of \countUTFx.
-  % It must be a non-initial byte in the sequence.
-  % Change \uccode of #1 for it to be used in \parseUTFviiiB as one
-  % of the bytes.
-  \gdef\parseUTFviiiA#1{%
-    \countUTFx = \countUTFz
-    \divide\countUTFz by 64
-    \countUTFy = \countUTFz  % Save to be the future value of \countUTFz.
-    \multiply\countUTFz by 64
-    
-    % \countUTFz is now \countUTFx with the last 5 bits cleared.  Subtract
-    % in order to get the last five bits.
-    \advance\countUTFx by -\countUTFz
-
-    % Convert this to the byte in the UTF-8 sequence.
-    \advance\countUTFx by 128
-    \uccode `#1\countUTFx
-    \countUTFz = \countUTFy}
-
-  % Used to put a UTF-8 byte sequence into \UTFviiiTmp
-  % #1 is the increment for \countUTFz to yield a the first byte of the UTF-8
-  %    sequence.
-  % #2 is one of the \UTFviii*OctetsName macros.
-  % #3 is always a full stop (.)
-  % #4 is a template for the other bytes in the sequence.  The values for these
-  %    bytes is substituted in here with \uppercase using the \uccode's.
-  \gdef\parseUTFviiiB#1#2#3#4{%
-    \advance\countUTFz by "#10\relax
-    \uccode `#3\countUTFz
-    \uppercase{\gdef\UTFviiiTmp{#2#3#4}}}
-\endgroup
-
-% For native Unicode handling (XeTeX and LuaTeX),
-% provide a definition macro that sets a catcode to `other' non-globally
-%
-\def\DeclareUnicodeCharacterNativeOther#1#2{%
-  \catcode"#1=\other
-}
-
-% https://en.wikipedia.org/wiki/Plane_(Unicode)#Basic_M
-% U+0000..U+007F = https://en.wikipedia.org/wiki/Basic_Latin_(Unicode_block)
-% U+0080..U+00FF = https://en.wikipedia.org/wiki/Latin-1_Supplement_(Unicode_block)
-% U+0100..U+017F = https://en.wikipedia.org/wiki/Latin_Extended-A
-% U+0180..U+024F = https://en.wikipedia.org/wiki/Latin_Extended-B
-% 
-% Many of our renditions are less than wonderful, and all the missing
-% characters are available somewhere.  Loading the necessary fonts
-% awaits user request.  We can't truly support Unicode without
-% reimplementing everything that's been done in LaTeX for many years,
-% plus probably using luatex or xetex, and who knows what else.
-% We won't be doing that here in this simple file.  But we can try to at
-% least make most of the characters not bomb out.
-%
-\def\unicodechardefs{%
-  \DeclareUnicodeCharacter{00A0}{\tie}%
-  \DeclareUnicodeCharacter{00A1}{\exclamdown}%
-  \DeclareUnicodeCharacter{00A2}{{\tcfont \char162}}% 0242=cent
-  \DeclareUnicodeCharacter{00A3}{\pounds{}}%
-  \DeclareUnicodeCharacter{00A4}{{\tcfont \char164}}% 0244=currency
-  \DeclareUnicodeCharacter{00A5}{{\tcfont \char165}}% 0245=yen
-  \DeclareUnicodeCharacter{00A6}{{\tcfont \char166}}% 0246=brokenbar
-  \DeclareUnicodeCharacter{00A7}{\S}%
-  \DeclareUnicodeCharacter{00A8}{\"{ }}%
-  \DeclareUnicodeCharacter{00A9}{\copyright{}}%
-  \DeclareUnicodeCharacter{00AA}{\ordf}%
-  \DeclareUnicodeCharacter{00AB}{\guillemetleft{}}%
-  \DeclareUnicodeCharacter{00AC}{\ensuremath\lnot}%
-  \DeclareUnicodeCharacter{00AD}{\-}%
-  \DeclareUnicodeCharacter{00AE}{\registeredsymbol{}}%
-  \DeclareUnicodeCharacter{00AF}{\={ }}%
-  %
-  \DeclareUnicodeCharacter{00B0}{\ringaccent{ }}%
-  \DeclareUnicodeCharacter{00B1}{\ensuremath\pm}%
-  \DeclareUnicodeCharacter{00B2}{$^2$}%
-  \DeclareUnicodeCharacter{00B3}{$^3$}%
-  \DeclareUnicodeCharacter{00B4}{\'{ }}%
-  \DeclareUnicodeCharacter{00B5}{$\mu$}%
-  \DeclareUnicodeCharacter{00B6}{\P}%
-  \DeclareUnicodeCharacter{00B7}{\ensuremath\cdot}%
-  \DeclareUnicodeCharacter{00B8}{\cedilla{ }}%
-  \DeclareUnicodeCharacter{00B9}{$^1$}%
-  \DeclareUnicodeCharacter{00BA}{\ordm}%
-  \DeclareUnicodeCharacter{00BB}{\guillemetright{}}%
-  \DeclareUnicodeCharacter{00BC}{$1\over4$}%
-  \DeclareUnicodeCharacter{00BD}{$1\over2$}%
-  \DeclareUnicodeCharacter{00BE}{$3\over4$}%
-  \DeclareUnicodeCharacter{00BF}{\questiondown}%
-  %
-  \DeclareUnicodeCharacter{00C0}{\`A}%
-  \DeclareUnicodeCharacter{00C1}{\'A}%
-  \DeclareUnicodeCharacter{00C2}{\^A}%
-  \DeclareUnicodeCharacter{00C3}{\~A}%
-  \DeclareUnicodeCharacter{00C4}{\"A}%
-  \DeclareUnicodeCharacter{00C5}{\AA}%
-  \DeclareUnicodeCharacter{00C6}{\AE}%
-  \DeclareUnicodeCharacter{00C7}{\cedilla{C}}%
-  \DeclareUnicodeCharacter{00C8}{\`E}%
-  \DeclareUnicodeCharacter{00C9}{\'E}%
-  \DeclareUnicodeCharacter{00CA}{\^E}%
-  \DeclareUnicodeCharacter{00CB}{\"E}%
-  \DeclareUnicodeCharacter{00CC}{\`I}%
-  \DeclareUnicodeCharacter{00CD}{\'I}%
-  \DeclareUnicodeCharacter{00CE}{\^I}%
-  \DeclareUnicodeCharacter{00CF}{\"I}%
-  %
-  \DeclareUnicodeCharacter{00D0}{\DH}%
-  \DeclareUnicodeCharacter{00D1}{\~N}%
-  \DeclareUnicodeCharacter{00D2}{\`O}%
-  \DeclareUnicodeCharacter{00D3}{\'O}%
-  \DeclareUnicodeCharacter{00D4}{\^O}%
-  \DeclareUnicodeCharacter{00D5}{\~O}%
-  \DeclareUnicodeCharacter{00D6}{\"O}%
-  \DeclareUnicodeCharacter{00D7}{\ensuremath\times}%
-  \DeclareUnicodeCharacter{00D8}{\O}%
-  \DeclareUnicodeCharacter{00D9}{\`U}%
-  \DeclareUnicodeCharacter{00DA}{\'U}%
-  \DeclareUnicodeCharacter{00DB}{\^U}%
-  \DeclareUnicodeCharacter{00DC}{\"U}%
-  \DeclareUnicodeCharacter{00DD}{\'Y}%
-  \DeclareUnicodeCharacter{00DE}{\TH}%
-  \DeclareUnicodeCharacter{00DF}{\ss}%
-  %
-  \DeclareUnicodeCharacter{00E0}{\`a}%
-  \DeclareUnicodeCharacter{00E1}{\'a}%
-  \DeclareUnicodeCharacter{00E2}{\^a}%
-  \DeclareUnicodeCharacter{00E3}{\~a}%
-  \DeclareUnicodeCharacter{00E4}{\"a}%
-  \DeclareUnicodeCharacter{00E5}{\aa}%
-  \DeclareUnicodeCharacter{00E6}{\ae}%
-  \DeclareUnicodeCharacter{00E7}{\cedilla{c}}%
-  \DeclareUnicodeCharacter{00E8}{\`e}%
-  \DeclareUnicodeCharacter{00E9}{\'e}%
-  \DeclareUnicodeCharacter{00EA}{\^e}%
-  \DeclareUnicodeCharacter{00EB}{\"e}%
-  \DeclareUnicodeCharacter{00EC}{\`{\dotless{i}}}%
-  \DeclareUnicodeCharacter{00ED}{\'{\dotless{i}}}%
-  \DeclareUnicodeCharacter{00EE}{\^{\dotless{i}}}%
-  \DeclareUnicodeCharacter{00EF}{\"{\dotless{i}}}%
-  %
-  \DeclareUnicodeCharacter{00F0}{\dh}%
-  \DeclareUnicodeCharacter{00F1}{\~n}%
-  \DeclareUnicodeCharacter{00F2}{\`o}%
-  \DeclareUnicodeCharacter{00F3}{\'o}%
-  \DeclareUnicodeCharacter{00F4}{\^o}%
-  \DeclareUnicodeCharacter{00F5}{\~o}%
-  \DeclareUnicodeCharacter{00F6}{\"o}%
-  \DeclareUnicodeCharacter{00F7}{\ensuremath\div}%
-  \DeclareUnicodeCharacter{00F8}{\o}%
-  \DeclareUnicodeCharacter{00F9}{\`u}%
-  \DeclareUnicodeCharacter{00FA}{\'u}%
-  \DeclareUnicodeCharacter{00FB}{\^u}%
-  \DeclareUnicodeCharacter{00FC}{\"u}%
-  \DeclareUnicodeCharacter{00FD}{\'y}%
-  \DeclareUnicodeCharacter{00FE}{\th}%
-  \DeclareUnicodeCharacter{00FF}{\"y}%
-  %
-  \DeclareUnicodeCharacter{0100}{\=A}%
-  \DeclareUnicodeCharacter{0101}{\=a}%
-  \DeclareUnicodeCharacter{0102}{\u{A}}%
-  \DeclareUnicodeCharacter{0103}{\u{a}}%
-  \DeclareUnicodeCharacter{0104}{\ogonek{A}}%
-  \DeclareUnicodeCharacter{0105}{\ogonek{a}}%
-  \DeclareUnicodeCharacter{0106}{\'C}%
-  \DeclareUnicodeCharacter{0107}{\'c}%
-  \DeclareUnicodeCharacter{0108}{\^C}%
-  \DeclareUnicodeCharacter{0109}{\^c}%
-  \DeclareUnicodeCharacter{010A}{\dotaccent{C}}%
-  \DeclareUnicodeCharacter{010B}{\dotaccent{c}}%
-  \DeclareUnicodeCharacter{010C}{\v{C}}%
-  \DeclareUnicodeCharacter{010D}{\v{c}}%
-  \DeclareUnicodeCharacter{010E}{\v{D}}%
-  \DeclareUnicodeCharacter{010F}{d'}%
-  %
-  \DeclareUnicodeCharacter{0110}{\DH}%
-  \DeclareUnicodeCharacter{0111}{\dh}%
-  \DeclareUnicodeCharacter{0112}{\=E}%
-  \DeclareUnicodeCharacter{0113}{\=e}%
-  \DeclareUnicodeCharacter{0114}{\u{E}}%
-  \DeclareUnicodeCharacter{0115}{\u{e}}%
-  \DeclareUnicodeCharacter{0116}{\dotaccent{E}}%
-  \DeclareUnicodeCharacter{0117}{\dotaccent{e}}%
-  \DeclareUnicodeCharacter{0118}{\ogonek{E}}%
-  \DeclareUnicodeCharacter{0119}{\ogonek{e}}%
-  \DeclareUnicodeCharacter{011A}{\v{E}}%
-  \DeclareUnicodeCharacter{011B}{\v{e}}%
-  \DeclareUnicodeCharacter{011C}{\^G}%
-  \DeclareUnicodeCharacter{011D}{\^g}%
-  \DeclareUnicodeCharacter{011E}{\u{G}}%
-  \DeclareUnicodeCharacter{011F}{\u{g}}%
-  %
-  \DeclareUnicodeCharacter{0120}{\dotaccent{G}}%
-  \DeclareUnicodeCharacter{0121}{\dotaccent{g}}%
-  \DeclareUnicodeCharacter{0122}{\cedilla{G}}%
-  \DeclareUnicodeCharacter{0123}{\cedilla{g}}%
-  \DeclareUnicodeCharacter{0124}{\^H}%
-  \DeclareUnicodeCharacter{0125}{\^h}%
-  \DeclareUnicodeCharacter{0126}{\missingcharmsg{H WITH STROKE}}%
-  \DeclareUnicodeCharacter{0127}{\missingcharmsg{h WITH STROKE}}%
-  \DeclareUnicodeCharacter{0128}{\~I}%
-  \DeclareUnicodeCharacter{0129}{\~{\dotless{i}}}%
-  \DeclareUnicodeCharacter{012A}{\=I}%
-  \DeclareUnicodeCharacter{012B}{\={\dotless{i}}}%
-  \DeclareUnicodeCharacter{012C}{\u{I}}%
-  \DeclareUnicodeCharacter{012D}{\u{\dotless{i}}}%
-  \DeclareUnicodeCharacter{012E}{\ogonek{I}}%
-  \DeclareUnicodeCharacter{012F}{\ogonek{i}}%
-  %
-  \DeclareUnicodeCharacter{0130}{\dotaccent{I}}%
-  \DeclareUnicodeCharacter{0131}{\dotless{i}}%
-  \DeclareUnicodeCharacter{0132}{IJ}%
-  \DeclareUnicodeCharacter{0133}{ij}%
-  \DeclareUnicodeCharacter{0134}{\^J}%
-  \DeclareUnicodeCharacter{0135}{\^{\dotless{j}}}%
-  \DeclareUnicodeCharacter{0136}{\cedilla{K}}%
-  \DeclareUnicodeCharacter{0137}{\cedilla{k}}%
-  \DeclareUnicodeCharacter{0138}{\ensuremath\kappa}%
-  \DeclareUnicodeCharacter{0139}{\'L}%
-  \DeclareUnicodeCharacter{013A}{\'l}%
-  \DeclareUnicodeCharacter{013B}{\cedilla{L}}%
-  \DeclareUnicodeCharacter{013C}{\cedilla{l}}%
-  \DeclareUnicodeCharacter{013D}{L'}% should kern
-  \DeclareUnicodeCharacter{013E}{l'}% should kern
-  \DeclareUnicodeCharacter{013F}{L\U{00B7}}%
-  %
-  \DeclareUnicodeCharacter{0140}{l\U{00B7}}%
-  \DeclareUnicodeCharacter{0141}{\L}%
-  \DeclareUnicodeCharacter{0142}{\l}%
-  \DeclareUnicodeCharacter{0143}{\'N}%
-  \DeclareUnicodeCharacter{0144}{\'n}%
-  \DeclareUnicodeCharacter{0145}{\cedilla{N}}%
-  \DeclareUnicodeCharacter{0146}{\cedilla{n}}%
-  \DeclareUnicodeCharacter{0147}{\v{N}}%
-  \DeclareUnicodeCharacter{0148}{\v{n}}%
-  \DeclareUnicodeCharacter{0149}{'n}%
-  \DeclareUnicodeCharacter{014A}{\missingcharmsg{ENG}}%
-  \DeclareUnicodeCharacter{014B}{\missingcharmsg{eng}}%
-  \DeclareUnicodeCharacter{014C}{\=O}%
-  \DeclareUnicodeCharacter{014D}{\=o}%
-  \DeclareUnicodeCharacter{014E}{\u{O}}%
-  \DeclareUnicodeCharacter{014F}{\u{o}}%
-  %
-  \DeclareUnicodeCharacter{0150}{\H{O}}%
-  \DeclareUnicodeCharacter{0151}{\H{o}}%
-  \DeclareUnicodeCharacter{0152}{\OE}%
-  \DeclareUnicodeCharacter{0153}{\oe}%
-  \DeclareUnicodeCharacter{0154}{\'R}%
-  \DeclareUnicodeCharacter{0155}{\'r}%
-  \DeclareUnicodeCharacter{0156}{\cedilla{R}}%
-  \DeclareUnicodeCharacter{0157}{\cedilla{r}}%
-  \DeclareUnicodeCharacter{0158}{\v{R}}%
-  \DeclareUnicodeCharacter{0159}{\v{r}}%
-  \DeclareUnicodeCharacter{015A}{\'S}%
-  \DeclareUnicodeCharacter{015B}{\'s}%
-  \DeclareUnicodeCharacter{015C}{\^S}%
-  \DeclareUnicodeCharacter{015D}{\^s}%
-  \DeclareUnicodeCharacter{015E}{\cedilla{S}}%
-  \DeclareUnicodeCharacter{015F}{\cedilla{s}}%
-  %
-  \DeclareUnicodeCharacter{0160}{\v{S}}%
-  \DeclareUnicodeCharacter{0161}{\v{s}}%
-  \DeclareUnicodeCharacter{0162}{\cedilla{T}}%
-  \DeclareUnicodeCharacter{0163}{\cedilla{t}}%
-  \DeclareUnicodeCharacter{0164}{\v{T}}%
-  \DeclareUnicodeCharacter{0165}{\v{t}}%
-  \DeclareUnicodeCharacter{0166}{\missingcharmsg{H WITH STROKE}}%
-  \DeclareUnicodeCharacter{0167}{\missingcharmsg{h WITH STROKE}}%
-  \DeclareUnicodeCharacter{0168}{\~U}%
-  \DeclareUnicodeCharacter{0169}{\~u}%
-  \DeclareUnicodeCharacter{016A}{\=U}%
-  \DeclareUnicodeCharacter{016B}{\=u}%
-  \DeclareUnicodeCharacter{016C}{\u{U}}%
-  \DeclareUnicodeCharacter{016D}{\u{u}}%
-  \DeclareUnicodeCharacter{016E}{\ringaccent{U}}%
-  \DeclareUnicodeCharacter{016F}{\ringaccent{u}}%
-  %
-  \DeclareUnicodeCharacter{0170}{\H{U}}%
-  \DeclareUnicodeCharacter{0171}{\H{u}}%
-  \DeclareUnicodeCharacter{0172}{\ogonek{U}}%
-  \DeclareUnicodeCharacter{0173}{\ogonek{u}}%
-  \DeclareUnicodeCharacter{0174}{\^W}%
-  \DeclareUnicodeCharacter{0175}{\^w}%
-  \DeclareUnicodeCharacter{0176}{\^Y}%
-  \DeclareUnicodeCharacter{0177}{\^y}%
-  \DeclareUnicodeCharacter{0178}{\"Y}%
-  \DeclareUnicodeCharacter{0179}{\'Z}%
-  \DeclareUnicodeCharacter{017A}{\'z}%
-  \DeclareUnicodeCharacter{017B}{\dotaccent{Z}}%
-  \DeclareUnicodeCharacter{017C}{\dotaccent{z}}%
-  \DeclareUnicodeCharacter{017D}{\v{Z}}%
-  \DeclareUnicodeCharacter{017E}{\v{z}}%
-  \DeclareUnicodeCharacter{017F}{\missingcharmsg{LONG S}}%
-  %
-  \DeclareUnicodeCharacter{01C4}{D\v{Z}}%
-  \DeclareUnicodeCharacter{01C5}{D\v{z}}%
-  \DeclareUnicodeCharacter{01C6}{d\v{z}}%
-  \DeclareUnicodeCharacter{01C7}{LJ}%
-  \DeclareUnicodeCharacter{01C8}{Lj}%
-  \DeclareUnicodeCharacter{01C9}{lj}%
-  \DeclareUnicodeCharacter{01CA}{NJ}%
-  \DeclareUnicodeCharacter{01CB}{Nj}%
-  \DeclareUnicodeCharacter{01CC}{nj}%
-  \DeclareUnicodeCharacter{01CD}{\v{A}}%
-  \DeclareUnicodeCharacter{01CE}{\v{a}}%
-  \DeclareUnicodeCharacter{01CF}{\v{I}}%
-  %
-  \DeclareUnicodeCharacter{01D0}{\v{\dotless{i}}}%
-  \DeclareUnicodeCharacter{01D1}{\v{O}}%
-  \DeclareUnicodeCharacter{01D2}{\v{o}}%
-  \DeclareUnicodeCharacter{01D3}{\v{U}}%
-  \DeclareUnicodeCharacter{01D4}{\v{u}}%
-  %
-  \DeclareUnicodeCharacter{01E2}{\={\AE}}%
-  \DeclareUnicodeCharacter{01E3}{\={\ae}}%
-  \DeclareUnicodeCharacter{01E6}{\v{G}}%
-  \DeclareUnicodeCharacter{01E7}{\v{g}}%
-  \DeclareUnicodeCharacter{01E8}{\v{K}}%
-  \DeclareUnicodeCharacter{01E9}{\v{k}}%
-  %
-  \DeclareUnicodeCharacter{01F0}{\v{\dotless{j}}}%
-  \DeclareUnicodeCharacter{01F1}{DZ}%
-  \DeclareUnicodeCharacter{01F2}{Dz}%
-  \DeclareUnicodeCharacter{01F3}{dz}%
-  \DeclareUnicodeCharacter{01F4}{\'G}%
-  \DeclareUnicodeCharacter{01F5}{\'g}%
-  \DeclareUnicodeCharacter{01F8}{\`N}%
-  \DeclareUnicodeCharacter{01F9}{\`n}%
-  \DeclareUnicodeCharacter{01FC}{\'{\AE}}%
-  \DeclareUnicodeCharacter{01FD}{\'{\ae}}%
-  \DeclareUnicodeCharacter{01FE}{\'{\O}}%
-  \DeclareUnicodeCharacter{01FF}{\'{\o}}%
-  %
-  \DeclareUnicodeCharacter{021E}{\v{H}}%
-  \DeclareUnicodeCharacter{021F}{\v{h}}%
-  %
-  \DeclareUnicodeCharacter{0226}{\dotaccent{A}}%
-  \DeclareUnicodeCharacter{0227}{\dotaccent{a}}%
-  \DeclareUnicodeCharacter{0228}{\cedilla{E}}%
-  \DeclareUnicodeCharacter{0229}{\cedilla{e}}%
-  \DeclareUnicodeCharacter{022E}{\dotaccent{O}}%
-  \DeclareUnicodeCharacter{022F}{\dotaccent{o}}%
-  %
-  \DeclareUnicodeCharacter{0232}{\=Y}%
-  \DeclareUnicodeCharacter{0233}{\=y}%
-  \DeclareUnicodeCharacter{0237}{\dotless{j}}%
-  %
-  \DeclareUnicodeCharacter{02DB}{\ogonek{ }}%
-  %
-  % Greek letters upper case
-  \DeclareUnicodeCharacter{0391}{{\it A}}%
-  \DeclareUnicodeCharacter{0392}{{\it B}}%
-  \DeclareUnicodeCharacter{0393}{\ensuremath{\mit\Gamma}}%
-  \DeclareUnicodeCharacter{0394}{\ensuremath{\mit\Delta}}%
-  \DeclareUnicodeCharacter{0395}{{\it E}}%
-  \DeclareUnicodeCharacter{0396}{{\it Z}}%
-  \DeclareUnicodeCharacter{0397}{{\it H}}%
-  \DeclareUnicodeCharacter{0398}{\ensuremath{\mit\Theta}}%
-  \DeclareUnicodeCharacter{0399}{{\it I}}%
-  \DeclareUnicodeCharacter{039A}{{\it K}}%
-  \DeclareUnicodeCharacter{039B}{\ensuremath{\mit\Lambda}}%
-  \DeclareUnicodeCharacter{039C}{{\it M}}%
-  \DeclareUnicodeCharacter{039D}{{\it N}}%
-  \DeclareUnicodeCharacter{039E}{\ensuremath{\mit\Xi}}%
-  \DeclareUnicodeCharacter{039F}{{\it O}}%
-  \DeclareUnicodeCharacter{03A0}{\ensuremath{\mit\Pi}}%
-  \DeclareUnicodeCharacter{03A1}{{\it P}}%
-  %\DeclareUnicodeCharacter{03A2}{} % none - corresponds to final sigma
-  \DeclareUnicodeCharacter{03A3}{\ensuremath{\mit\Sigma}}%
-  \DeclareUnicodeCharacter{03A4}{{\it T}}%
-  \DeclareUnicodeCharacter{03A5}{\ensuremath{\mit\Upsilon}}%
-  \DeclareUnicodeCharacter{03A6}{\ensuremath{\mit\Phi}}%
-  \DeclareUnicodeCharacter{03A7}{{\it X}}%
-  \DeclareUnicodeCharacter{03A8}{\ensuremath{\mit\Psi}}%
-  \DeclareUnicodeCharacter{03A9}{\ensuremath{\mit\Omega}}%
-  %
-  % Vowels with accents
-  \DeclareUnicodeCharacter{0390}{\ensuremath{\ddot{\acute\iota}}}%
-  \DeclareUnicodeCharacter{03AC}{\ensuremath{\acute\alpha}}%
-  \DeclareUnicodeCharacter{03AD}{\ensuremath{\acute\epsilon}}%
-  \DeclareUnicodeCharacter{03AE}{\ensuremath{\acute\eta}}%
-  \DeclareUnicodeCharacter{03AF}{\ensuremath{\acute\iota}}%
-  \DeclareUnicodeCharacter{03B0}{\ensuremath{\acute{\ddot\upsilon}}}%
-  %
-  % Standalone accent
-  \DeclareUnicodeCharacter{0384}{\ensuremath{\acute{\ }}}%
-  %
-  % Greek letters lower case
-  \DeclareUnicodeCharacter{03B1}{\ensuremath\alpha}%
-  \DeclareUnicodeCharacter{03B2}{\ensuremath\beta}%
-  \DeclareUnicodeCharacter{03B3}{\ensuremath\gamma}%
-  \DeclareUnicodeCharacter{03B4}{\ensuremath\delta}%
-  \DeclareUnicodeCharacter{03B5}{\ensuremath\epsilon}%
-  \DeclareUnicodeCharacter{03B6}{\ensuremath\zeta}%
-  \DeclareUnicodeCharacter{03B7}{\ensuremath\eta}%
-  \DeclareUnicodeCharacter{03B8}{\ensuremath\theta}%
-  \DeclareUnicodeCharacter{03B9}{\ensuremath\iota}%
-  \DeclareUnicodeCharacter{03BA}{\ensuremath\kappa}%
-  \DeclareUnicodeCharacter{03BB}{\ensuremath\lambda}%
-  \DeclareUnicodeCharacter{03BC}{\ensuremath\mu}%
-  \DeclareUnicodeCharacter{03BD}{\ensuremath\nu}%
-  \DeclareUnicodeCharacter{03BE}{\ensuremath\xi}%
-  \DeclareUnicodeCharacter{03BF}{{\it o}}% omicron
-  \DeclareUnicodeCharacter{03C0}{\ensuremath\pi}%
-  \DeclareUnicodeCharacter{03C1}{\ensuremath\rho}%
-  \DeclareUnicodeCharacter{03C2}{\ensuremath\varsigma}%
-  \DeclareUnicodeCharacter{03C3}{\ensuremath\sigma}%
-  \DeclareUnicodeCharacter{03C4}{\ensuremath\tau}%
-  \DeclareUnicodeCharacter{03C5}{\ensuremath\upsilon}%
-  \DeclareUnicodeCharacter{03C6}{\ensuremath\phi}%
-  \DeclareUnicodeCharacter{03C7}{\ensuremath\chi}%
-  \DeclareUnicodeCharacter{03C8}{\ensuremath\psi}%
-  \DeclareUnicodeCharacter{03C9}{\ensuremath\omega}%
-  %
-  % More Greek vowels with accents
-  \DeclareUnicodeCharacter{03CA}{\ensuremath{\ddot\iota}}%
-  \DeclareUnicodeCharacter{03CB}{\ensuremath{\ddot\upsilon}}%
-  \DeclareUnicodeCharacter{03CC}{\ensuremath{\acute o}}%
-  \DeclareUnicodeCharacter{03CD}{\ensuremath{\acute\upsilon}}%
-  \DeclareUnicodeCharacter{03CE}{\ensuremath{\acute\omega}}%
-  %
-  % Variant Greek letters
-  \DeclareUnicodeCharacter{03D1}{\ensuremath\vartheta}%
-  \DeclareUnicodeCharacter{03D6}{\ensuremath\varpi}%
-  \DeclareUnicodeCharacter{03F1}{\ensuremath\varrho}%
-  %
-  \DeclareUnicodeCharacter{1E02}{\dotaccent{B}}%
-  \DeclareUnicodeCharacter{1E03}{\dotaccent{b}}%
-  \DeclareUnicodeCharacter{1E04}{\udotaccent{B}}%
-  \DeclareUnicodeCharacter{1E05}{\udotaccent{b}}%
-  \DeclareUnicodeCharacter{1E06}{\ubaraccent{B}}%
-  \DeclareUnicodeCharacter{1E07}{\ubaraccent{b}}%
-  \DeclareUnicodeCharacter{1E0A}{\dotaccent{D}}%
-  \DeclareUnicodeCharacter{1E0B}{\dotaccent{d}}%
-  \DeclareUnicodeCharacter{1E0C}{\udotaccent{D}}%
-  \DeclareUnicodeCharacter{1E0D}{\udotaccent{d}}%
-  \DeclareUnicodeCharacter{1E0E}{\ubaraccent{D}}%
-  \DeclareUnicodeCharacter{1E0F}{\ubaraccent{d}}%
-  %
-  \DeclareUnicodeCharacter{1E1E}{\dotaccent{F}}%
-  \DeclareUnicodeCharacter{1E1F}{\dotaccent{f}}%
-  %
-  \DeclareUnicodeCharacter{1E20}{\=G}%
-  \DeclareUnicodeCharacter{1E21}{\=g}%
-  \DeclareUnicodeCharacter{1E22}{\dotaccent{H}}%
-  \DeclareUnicodeCharacter{1E23}{\dotaccent{h}}%
-  \DeclareUnicodeCharacter{1E24}{\udotaccent{H}}%
-  \DeclareUnicodeCharacter{1E25}{\udotaccent{h}}%
-  \DeclareUnicodeCharacter{1E26}{\"H}%
-  \DeclareUnicodeCharacter{1E27}{\"h}%
-  %
-  \DeclareUnicodeCharacter{1E30}{\'K}%
-  \DeclareUnicodeCharacter{1E31}{\'k}%
-  \DeclareUnicodeCharacter{1E32}{\udotaccent{K}}%
-  \DeclareUnicodeCharacter{1E33}{\udotaccent{k}}%
-  \DeclareUnicodeCharacter{1E34}{\ubaraccent{K}}%
-  \DeclareUnicodeCharacter{1E35}{\ubaraccent{k}}%
-  \DeclareUnicodeCharacter{1E36}{\udotaccent{L}}%
-  \DeclareUnicodeCharacter{1E37}{\udotaccent{l}}%
-  \DeclareUnicodeCharacter{1E3A}{\ubaraccent{L}}%
-  \DeclareUnicodeCharacter{1E3B}{\ubaraccent{l}}%
-  \DeclareUnicodeCharacter{1E3E}{\'M}%
-  \DeclareUnicodeCharacter{1E3F}{\'m}%
-  %
-  \DeclareUnicodeCharacter{1E40}{\dotaccent{M}}%
-  \DeclareUnicodeCharacter{1E41}{\dotaccent{m}}%
-  \DeclareUnicodeCharacter{1E42}{\udotaccent{M}}%
-  \DeclareUnicodeCharacter{1E43}{\udotaccent{m}}%
-  \DeclareUnicodeCharacter{1E44}{\dotaccent{N}}%
-  \DeclareUnicodeCharacter{1E45}{\dotaccent{n}}%
-  \DeclareUnicodeCharacter{1E46}{\udotaccent{N}}%
-  \DeclareUnicodeCharacter{1E47}{\udotaccent{n}}%
-  \DeclareUnicodeCharacter{1E48}{\ubaraccent{N}}%
-  \DeclareUnicodeCharacter{1E49}{\ubaraccent{n}}%
-  %
-  \DeclareUnicodeCharacter{1E54}{\'P}%
-  \DeclareUnicodeCharacter{1E55}{\'p}%
-  \DeclareUnicodeCharacter{1E56}{\dotaccent{P}}%
-  \DeclareUnicodeCharacter{1E57}{\dotaccent{p}}%
-  \DeclareUnicodeCharacter{1E58}{\dotaccent{R}}%
-  \DeclareUnicodeCharacter{1E59}{\dotaccent{r}}%
-  \DeclareUnicodeCharacter{1E5A}{\udotaccent{R}}%
-  \DeclareUnicodeCharacter{1E5B}{\udotaccent{r}}%
-  \DeclareUnicodeCharacter{1E5E}{\ubaraccent{R}}%
-  \DeclareUnicodeCharacter{1E5F}{\ubaraccent{r}}%
-  %
-  \DeclareUnicodeCharacter{1E60}{\dotaccent{S}}%
-  \DeclareUnicodeCharacter{1E61}{\dotaccent{s}}%
-  \DeclareUnicodeCharacter{1E62}{\udotaccent{S}}%
-  \DeclareUnicodeCharacter{1E63}{\udotaccent{s}}%
-  \DeclareUnicodeCharacter{1E6A}{\dotaccent{T}}%
-  \DeclareUnicodeCharacter{1E6B}{\dotaccent{t}}%
-  \DeclareUnicodeCharacter{1E6C}{\udotaccent{T}}%
-  \DeclareUnicodeCharacter{1E6D}{\udotaccent{t}}%
-  \DeclareUnicodeCharacter{1E6E}{\ubaraccent{T}}%
-  \DeclareUnicodeCharacter{1E6F}{\ubaraccent{t}}%
-  %
-  \DeclareUnicodeCharacter{1E7C}{\~V}%
-  \DeclareUnicodeCharacter{1E7D}{\~v}%
-  \DeclareUnicodeCharacter{1E7E}{\udotaccent{V}}%
-  \DeclareUnicodeCharacter{1E7F}{\udotaccent{v}}%
-  %
-  \DeclareUnicodeCharacter{1E80}{\`W}%
-  \DeclareUnicodeCharacter{1E81}{\`w}%
-  \DeclareUnicodeCharacter{1E82}{\'W}%
-  \DeclareUnicodeCharacter{1E83}{\'w}%
-  \DeclareUnicodeCharacter{1E84}{\"W}%
-  \DeclareUnicodeCharacter{1E85}{\"w}%
-  \DeclareUnicodeCharacter{1E86}{\dotaccent{W}}%
-  \DeclareUnicodeCharacter{1E87}{\dotaccent{w}}%
-  \DeclareUnicodeCharacter{1E88}{\udotaccent{W}}%
-  \DeclareUnicodeCharacter{1E89}{\udotaccent{w}}%
-  \DeclareUnicodeCharacter{1E8A}{\dotaccent{X}}%
-  \DeclareUnicodeCharacter{1E8B}{\dotaccent{x}}%
-  \DeclareUnicodeCharacter{1E8C}{\"X}%
-  \DeclareUnicodeCharacter{1E8D}{\"x}%
-  \DeclareUnicodeCharacter{1E8E}{\dotaccent{Y}}%
-  \DeclareUnicodeCharacter{1E8F}{\dotaccent{y}}%
-  %
-  \DeclareUnicodeCharacter{1E90}{\^Z}%
-  \DeclareUnicodeCharacter{1E91}{\^z}%
-  \DeclareUnicodeCharacter{1E92}{\udotaccent{Z}}%
-  \DeclareUnicodeCharacter{1E93}{\udotaccent{z}}%
-  \DeclareUnicodeCharacter{1E94}{\ubaraccent{Z}}%
-  \DeclareUnicodeCharacter{1E95}{\ubaraccent{z}}%
-  \DeclareUnicodeCharacter{1E96}{\ubaraccent{h}}%
-  \DeclareUnicodeCharacter{1E97}{\"t}%
-  \DeclareUnicodeCharacter{1E98}{\ringaccent{w}}%
-  \DeclareUnicodeCharacter{1E99}{\ringaccent{y}}%
-  %
-  \DeclareUnicodeCharacter{1EA0}{\udotaccent{A}}%
-  \DeclareUnicodeCharacter{1EA1}{\udotaccent{a}}%
-  %
-  \DeclareUnicodeCharacter{1EB8}{\udotaccent{E}}%
-  \DeclareUnicodeCharacter{1EB9}{\udotaccent{e}}%
-  \DeclareUnicodeCharacter{1EBC}{\~E}%
-  \DeclareUnicodeCharacter{1EBD}{\~e}%
-  %
-  \DeclareUnicodeCharacter{1ECA}{\udotaccent{I}}%
-  \DeclareUnicodeCharacter{1ECB}{\udotaccent{i}}%
-  \DeclareUnicodeCharacter{1ECC}{\udotaccent{O}}%
-  \DeclareUnicodeCharacter{1ECD}{\udotaccent{o}}%
-  %
-  \DeclareUnicodeCharacter{1EE4}{\udotaccent{U}}%
-  \DeclareUnicodeCharacter{1EE5}{\udotaccent{u}}%
-  %
-  \DeclareUnicodeCharacter{1EF2}{\`Y}%
-  \DeclareUnicodeCharacter{1EF3}{\`y}%
-  \DeclareUnicodeCharacter{1EF4}{\udotaccent{Y}}%
-  %
-  \DeclareUnicodeCharacter{1EF8}{\~Y}%
-  \DeclareUnicodeCharacter{1EF9}{\~y}%
-  %
-  % Punctuation
-  \DeclareUnicodeCharacter{2013}{--}%
-  \DeclareUnicodeCharacter{2014}{---}%
-  \DeclareUnicodeCharacter{2018}{\quoteleft{}}%
-  \DeclareUnicodeCharacter{2019}{\quoteright{}}%
-  \DeclareUnicodeCharacter{201A}{\quotesinglbase{}}%
-  \DeclareUnicodeCharacter{201C}{\quotedblleft{}}%
-  \DeclareUnicodeCharacter{201D}{\quotedblright{}}%
-  \DeclareUnicodeCharacter{201E}{\quotedblbase{}}%
-  \DeclareUnicodeCharacter{2020}{\ensuremath\dagger}%
-  \DeclareUnicodeCharacter{2021}{\ensuremath\ddagger}%
-  \DeclareUnicodeCharacter{2022}{\bullet{}}%
-  \DeclareUnicodeCharacter{202F}{\thinspace}%
-  \DeclareUnicodeCharacter{2026}{\dots{}}%
-  \DeclareUnicodeCharacter{2039}{\guilsinglleft{}}%
-  \DeclareUnicodeCharacter{203A}{\guilsinglright{}}%
-  %
-  \DeclareUnicodeCharacter{20AC}{\euro{}}%
-  %
-  \DeclareUnicodeCharacter{2192}{\expansion{}}%
-  \DeclareUnicodeCharacter{21D2}{\result{}}%
-  %
-  % Mathematical symbols
-  \DeclareUnicodeCharacter{2200}{\ensuremath\forall}%
-  \DeclareUnicodeCharacter{2203}{\ensuremath\exists}%
-  \DeclareUnicodeCharacter{2208}{\ensuremath\in}%
-  \DeclareUnicodeCharacter{2212}{\minus{}}%
-  \DeclareUnicodeCharacter{2217}{\ast}%
-  \DeclareUnicodeCharacter{221E}{\ensuremath\infty}%
-  \DeclareUnicodeCharacter{2225}{\ensuremath\parallel}%
-  \DeclareUnicodeCharacter{2227}{\ensuremath\wedge}%
-  \DeclareUnicodeCharacter{2229}{\ensuremath\cap}%
-  \DeclareUnicodeCharacter{2261}{\equiv{}}%
-  \DeclareUnicodeCharacter{2264}{\ensuremath\leq}%
-  \DeclareUnicodeCharacter{2265}{\ensuremath\geq}%
-  \DeclareUnicodeCharacter{2282}{\ensuremath\subset}%
-  \DeclareUnicodeCharacter{2287}{\ensuremath\supseteq}%
-  %
-  \DeclareUnicodeCharacter{2016}{\ensuremath\Vert}%
-  \DeclareUnicodeCharacter{2032}{\ensuremath\prime}%
-  \DeclareUnicodeCharacter{210F}{\ensuremath\hbar}%
-  \DeclareUnicodeCharacter{2111}{\ensuremath\Im}%
-  \DeclareUnicodeCharacter{2113}{\ensuremath\ell}%
-  \DeclareUnicodeCharacter{2118}{\ensuremath\wp}%
-  \DeclareUnicodeCharacter{211C}{\ensuremath\Re}%
-  \DeclareUnicodeCharacter{2135}{\ensuremath\aleph}%
-  \DeclareUnicodeCharacter{2190}{\ensuremath\leftarrow}%
-  \DeclareUnicodeCharacter{2191}{\ensuremath\uparrow}%
-  \DeclareUnicodeCharacter{2193}{\ensuremath\downarrow}%
-  \DeclareUnicodeCharacter{2194}{\ensuremath\leftrightarrow}%
-  \DeclareUnicodeCharacter{2195}{\ensuremath\updownarrow}%
-  \DeclareUnicodeCharacter{2196}{\ensuremath\nwarrow}%
-  \DeclareUnicodeCharacter{2197}{\ensuremath\nearrow}%
-  \DeclareUnicodeCharacter{2198}{\ensuremath\searrow}%
-  \DeclareUnicodeCharacter{2199}{\ensuremath\swarrow}%
-  \DeclareUnicodeCharacter{21A6}{\ensuremath\mapsto}%
-  \DeclareUnicodeCharacter{21A9}{\ensuremath\hookleftarrow}%
-  \DeclareUnicodeCharacter{21AA}{\ensuremath\hookrightarrow}%
-  \DeclareUnicodeCharacter{21BC}{\ensuremath\leftharpoonup}%
-  \DeclareUnicodeCharacter{21BD}{\ensuremath\leftharpoondown}%
-  \DeclareUnicodeCharacter{21C0}{\ensuremath\rightharpoonup}%
-  \DeclareUnicodeCharacter{21C1}{\ensuremath\rightharpoondown}%
-  \DeclareUnicodeCharacter{21CC}{\ensuremath\rightleftharpoons}%
-  \DeclareUnicodeCharacter{21D0}{\ensuremath\Leftarrow}%
-  \DeclareUnicodeCharacter{21D1}{\ensuremath\Uparrow}%
-  \DeclareUnicodeCharacter{21D3}{\ensuremath\Downarrow}%
-  \DeclareUnicodeCharacter{21D4}{\ensuremath\Leftrightarrow}%
-  \DeclareUnicodeCharacter{21D5}{\ensuremath\Updownarrow}%
-  \DeclareUnicodeCharacter{2202}{\ensuremath\partial}%
-  \DeclareUnicodeCharacter{2205}{\ensuremath\emptyset}%
-  \DeclareUnicodeCharacter{2207}{\ensuremath\nabla}%
-  \DeclareUnicodeCharacter{2209}{\ensuremath\notin}%
-  \DeclareUnicodeCharacter{220B}{\ensuremath\owns}%
-  \DeclareUnicodeCharacter{220F}{\ensuremath\prod}%
-  \DeclareUnicodeCharacter{2210}{\ensuremath\coprod}%
-  \DeclareUnicodeCharacter{2211}{\ensuremath\sum}%
-  \DeclareUnicodeCharacter{2213}{\ensuremath\mp}%
-  \DeclareUnicodeCharacter{2218}{\ensuremath\circ}%
-  \DeclareUnicodeCharacter{221A}{\ensuremath\surd}%
-  \DeclareUnicodeCharacter{221D}{\ensuremath\propto}%
-  \DeclareUnicodeCharacter{2220}{\ensuremath\angle}%
-  \DeclareUnicodeCharacter{2223}{\ensuremath\mid}%
-  \DeclareUnicodeCharacter{2228}{\ensuremath\vee}%
-  \DeclareUnicodeCharacter{222A}{\ensuremath\cup}%
-  \DeclareUnicodeCharacter{222B}{\ensuremath\smallint}%
-  \DeclareUnicodeCharacter{222E}{\ensuremath\oint}%
-  \DeclareUnicodeCharacter{223C}{\ensuremath\sim}%
-  \DeclareUnicodeCharacter{2240}{\ensuremath\wr}%
-  \DeclareUnicodeCharacter{2243}{\ensuremath\simeq}%
-  \DeclareUnicodeCharacter{2245}{\ensuremath\cong}%
-  \DeclareUnicodeCharacter{2248}{\ensuremath\approx}%
-  \DeclareUnicodeCharacter{224D}{\ensuremath\asymp}%
-  \DeclareUnicodeCharacter{2250}{\ensuremath\doteq}%
-  \DeclareUnicodeCharacter{2260}{\ensuremath\neq}%
-  \DeclareUnicodeCharacter{226A}{\ensuremath\ll}%
-  \DeclareUnicodeCharacter{226B}{\ensuremath\gg}%
-  \DeclareUnicodeCharacter{227A}{\ensuremath\prec}%
-  \DeclareUnicodeCharacter{227B}{\ensuremath\succ}%
-  \DeclareUnicodeCharacter{2283}{\ensuremath\supset}%
-  \DeclareUnicodeCharacter{2286}{\ensuremath\subseteq}%
-  \DeclareUnicodeCharacter{228E}{\ensuremath\uplus}%
-  \DeclareUnicodeCharacter{2291}{\ensuremath\sqsubseteq}%
-  \DeclareUnicodeCharacter{2292}{\ensuremath\sqsupseteq}%
-  \DeclareUnicodeCharacter{2293}{\ensuremath\sqcap}%
-  \DeclareUnicodeCharacter{2294}{\ensuremath\sqcup}%
-  \DeclareUnicodeCharacter{2295}{\ensuremath\oplus}%
-  \DeclareUnicodeCharacter{2296}{\ensuremath\ominus}%
-  \DeclareUnicodeCharacter{2297}{\ensuremath\otimes}%
-  \DeclareUnicodeCharacter{2298}{\ensuremath\oslash}%
-  \DeclareUnicodeCharacter{2299}{\ensuremath\odot}%
-  \DeclareUnicodeCharacter{22A2}{\ensuremath\vdash}%
-  \DeclareUnicodeCharacter{22A3}{\ensuremath\dashv}%
-  \DeclareUnicodeCharacter{22A4}{\ensuremath\ptextop}%
-  \DeclareUnicodeCharacter{22A5}{\ensuremath\bot}%
-  \DeclareUnicodeCharacter{22A8}{\ensuremath\models}%
-  \DeclareUnicodeCharacter{22C0}{\ensuremath\bigwedge}%
-  \DeclareUnicodeCharacter{22C1}{\ensuremath\bigvee}%
-  \DeclareUnicodeCharacter{22C2}{\ensuremath\bigcap}%
-  \DeclareUnicodeCharacter{22C3}{\ensuremath\bigcup}%
-  \DeclareUnicodeCharacter{22C4}{\ensuremath\diamond}%
-  \DeclareUnicodeCharacter{22C5}{\ensuremath\cdot}%
-  \DeclareUnicodeCharacter{22C6}{\ensuremath\star}%
-  \DeclareUnicodeCharacter{22C8}{\ensuremath\bowtie}%
-  \DeclareUnicodeCharacter{2308}{\ensuremath\lceil}%
-  \DeclareUnicodeCharacter{2309}{\ensuremath\rceil}%
-  \DeclareUnicodeCharacter{230A}{\ensuremath\lfloor}%
-  \DeclareUnicodeCharacter{230B}{\ensuremath\rfloor}%
-  \DeclareUnicodeCharacter{2322}{\ensuremath\frown}%
-  \DeclareUnicodeCharacter{2323}{\ensuremath\smile}%
-  %
-  \DeclareUnicodeCharacter{25B3}{\ensuremath\triangle}%
-  \DeclareUnicodeCharacter{25B7}{\ensuremath\triangleright}%
-  \DeclareUnicodeCharacter{25BD}{\ensuremath\bigtriangledown}%
-  \DeclareUnicodeCharacter{25C1}{\ensuremath\triangleleft}%
-  \DeclareUnicodeCharacter{25C7}{\ensuremath\diamond}%
-  \DeclareUnicodeCharacter{2660}{\ensuremath\spadesuit}%
-  \DeclareUnicodeCharacter{2661}{\ensuremath\heartsuit}%
-  \DeclareUnicodeCharacter{2662}{\ensuremath\diamondsuit}%
-  \DeclareUnicodeCharacter{2663}{\ensuremath\clubsuit}%
-  \DeclareUnicodeCharacter{266D}{\ensuremath\flat}%
-  \DeclareUnicodeCharacter{266E}{\ensuremath\natural}%
-  \DeclareUnicodeCharacter{266F}{\ensuremath\sharp}%
-  \DeclareUnicodeCharacter{26AA}{\ensuremath\bigcirc}%
-  \DeclareUnicodeCharacter{27B9}{\ensuremath\rangle}%
-  \DeclareUnicodeCharacter{27C2}{\ensuremath\perp}%
-  \DeclareUnicodeCharacter{27E8}{\ensuremath\langle}%
-  \DeclareUnicodeCharacter{27F5}{\ensuremath\longleftarrow}%
-  \DeclareUnicodeCharacter{27F6}{\ensuremath\longrightarrow}%
-  \DeclareUnicodeCharacter{27F7}{\ensuremath\longleftrightarrow}%
-  \DeclareUnicodeCharacter{27FC}{\ensuremath\longmapsto}%
-  \DeclareUnicodeCharacter{29F5}{\ensuremath\setminus}%
-  \DeclareUnicodeCharacter{2A00}{\ensuremath\bigodot}%
-  \DeclareUnicodeCharacter{2A01}{\ensuremath\bigoplus}%
-  \DeclareUnicodeCharacter{2A02}{\ensuremath\bigotimes}%
-  \DeclareUnicodeCharacter{2A04}{\ensuremath\biguplus}%
-  \DeclareUnicodeCharacter{2A06}{\ensuremath\bigsqcup}%
-  \DeclareUnicodeCharacter{2A3F}{\ensuremath\amalg}%
-  \DeclareUnicodeCharacter{2AAF}{\ensuremath\preceq}%
-  \DeclareUnicodeCharacter{2AB0}{\ensuremath\succeq}%
-  %
-  \global\mathchardef\checkmark="1370% actually the square root sign
-  \DeclareUnicodeCharacter{2713}{\ensuremath\checkmark}%
-}% end of \unicodechardefs
-
-% UTF-8 byte sequence (pdfTeX) definitions (replacing and @U command)
-% It makes the setting that replace UTF-8 byte sequence.
-\def\utfeightchardefs{%
-  \let\DeclareUnicodeCharacter\DeclareUnicodeCharacterUTFviii
-  \unicodechardefs
-}
-
-% Whether the active definitions of non-ASCII characters expand to
-% non-active tokens with the same character code.  This is used to
-% write characters literally, instead of using active definitions for
-% printing the correct glyphs.
-\newif\ifpassthroughchars
-\passthroughcharsfalse
-
-% For native Unicode handling (XeTeX and LuaTeX),
-% provide a definition macro to replace/pass-through a Unicode character
-%
-\def\DeclareUnicodeCharacterNative#1#2{%
-  \catcode"#1=\active
-  \def\dodeclareunicodecharacternative##1##2##3{%
-    \begingroup
-      \uccode`\~="##2\relax
-      \uppercase{\gdef~}{%
-        \ifpassthroughchars
-          ##1%
-        \else
-          ##3%
-        \fi
-      }
-    \endgroup
-  }
-  \begingroup
-    \uccode`\.="#1\relax
-    \uppercase{\def\UTFNativeTmp{.}}%
-    \expandafter\dodeclareunicodecharacternative\UTFNativeTmp{#1}{#2}%
-  \endgroup
-}
-
-% Native Unicode handling (XeTeX and LuaTeX) character replacing definition.
-% It activates the setting that replaces Unicode characters.
-\def\nativeunicodechardefs{%
-  \let\DeclareUnicodeCharacter\DeclareUnicodeCharacterNative
-  \unicodechardefs
-}
-
-% For native Unicode handling (XeTeX and LuaTeX),
-% make the character token expand
-% to the sequences given in \unicodechardefs for printing.
-\def\DeclareUnicodeCharacterNativeAtU#1#2{%
-  \def\UTFAtUTmp{#2}
-  \expandafter\globallet\csname uni:#1\endcsname \UTFAtUTmp
-}
-
-% @U command definitions for native Unicode handling (XeTeX and LuaTeX).
-\def\nativeunicodechardefsatu{%
-  \let\DeclareUnicodeCharacter\DeclareUnicodeCharacterNativeAtU
-  \unicodechardefs
-}
-
-% US-ASCII character definitions.
-\def\asciichardefs{% nothing need be done
-   \relax
-}
-
-% Define all Unicode characters we know about.  This makes UTF-8 the default
-% input encoding and allows @U to work.
-\iftxinativeunicodecapable
-  \nativeunicodechardefsatu
-\else
-  \utfeightchardefs
-\fi
-
-\message{formatting,}
-
-\newdimen\defaultparindent \defaultparindent = 15pt
-
-\chapheadingskip = 15pt plus 4pt minus 2pt
-\secheadingskip = 12pt plus 3pt minus 2pt
-\subsecheadingskip = 9pt plus 2pt minus 2pt
-
-% Prevent underfull vbox error messages.
-\vbadness = 10000
-
-% Don't be very finicky about underfull hboxes, either.
-\hbadness = 6666
-
-% Following George Bush, get rid of widows and orphans.
-\widowpenalty=10000
-\clubpenalty=10000
-
-% Use TeX 3.0's \emergencystretch to help line breaking, but if we're
-% using an old version of TeX, don't do anything.  We want the amount of
-% stretch added to depend on the line length, hence the dependence on
-% \hsize.  We call this whenever the paper size is set.
-%
-\def\setemergencystretch{%
-  \ifx\emergencystretch\thisisundefined
-    % Allow us to assign to \emergencystretch anyway.
-    \def\emergencystretch{\dimen0}%
-  \else
-    \emergencystretch = .15\hsize
-  \fi
-}
-
-% Parameters in order: 1) textheight; 2) textwidth;
-% 3) voffset; 4) hoffset; 5) binding offset; 6) topskip;
-% 7) physical page height; 8) physical page width.
-%
-% We also call \setleading{\textleading}, so the caller should define
-% \textleading.  The caller should also set \parskip.
-%
-\def\internalpagesizes#1#2#3#4#5#6#7#8{%
-  \voffset = #3\relax
-  \topskip = #6\relax
-  \splittopskip = \topskip
-  %
-  \vsize = #1\relax
-  \advance\vsize by \topskip
-  \outervsize = \vsize
-  \advance\outervsize by 2\topandbottommargin
-  \txipageheight = \vsize
-  %
-  \hsize = #2\relax
-  \outerhsize = \hsize
-  \advance\outerhsize by 0.5in
-  \txipagewidth = \hsize
-  %
-  \normaloffset = #4\relax
-  \bindingoffset = #5\relax
-  %
-  \ifpdf
-    \pdfpageheight #7\relax
-    \pdfpagewidth #8\relax
-    % if we don't reset these, they will remain at "1 true in" of
-    % whatever layout pdftex was dumped with.
-    \pdfhorigin = 1 true in
-    \pdfvorigin = 1 true in
-  \else
-    \ifx\XeTeXrevision\thisisundefined
-      \special{papersize=#8,#7}%
-    \else
-      \pdfpageheight #7\relax
-      \pdfpagewidth #8\relax
-      % XeTeX does not have \pdfhorigin and \pdfvorigin.
-    \fi
-  \fi
-  %
-  \setleading{\textleading}
-  %
-  \parindent = \defaultparindent
-  \setemergencystretch
-}
-
-% @letterpaper (the default).
-\def\letterpaper{{\globaldefs = 1
-  \parskip = 3pt plus 2pt minus 1pt
-  \textleading = 13.2pt
-  %
-  % If page is nothing but text, make it come out even.
-  \internalpagesizes{607.2pt}{6in}% that's 46 lines
-                    {\voffset}{.25in}%
-                    {\bindingoffset}{36pt}%
-                    {11in}{8.5in}%
-}}
-
-% Use @smallbook to reset parameters for 7x9.25 trim size.
-\def\smallbook{{\globaldefs = 1
-  \parskip = 2pt plus 1pt
-  \textleading = 12pt
-  %
-  \internalpagesizes{7.5in}{5in}%
-                    {-.2in}{0in}%
-                    {\bindingoffset}{16pt}%
-                    {9.25in}{7in}%
-  %
-  \lispnarrowing = 0.3in
-  \tolerance = 700
-  \contentsrightmargin = 0pt
-  \defbodyindent = .5cm
-}}
-
-% Use @smallerbook to reset parameters for 6x9 trim size.
-% (Just testing, parameters still in flux.)
-\def\smallerbook{{\globaldefs = 1
-  \parskip = 1.5pt plus 1pt
-  \textleading = 12pt
-  %
-  \internalpagesizes{7.4in}{4.8in}%
-                    {-.2in}{-.4in}%
-                    {0pt}{14pt}%
-                    {9in}{6in}%
-  %
-  \lispnarrowing = 0.25in
-  \tolerance = 700
-  \contentsrightmargin = 0pt
-  \defbodyindent = .4cm
-}}
-
-% Use @afourpaper to print on European A4 paper.
-\def\afourpaper{{\globaldefs = 1
-  \parskip = 3pt plus 2pt minus 1pt
-  \textleading = 13.2pt
-  %
-  % Double-side printing via postscript on Laserjet 4050
-  % prints double-sided nicely when \bindingoffset=10mm and \hoffset=-6mm.
-  % To change the settings for a different printer or situation, adjust
-  % \normaloffset until the front-side and back-side texts align.  Then
-  % do the same for \bindingoffset.  You can set these for testing in
-  % your texinfo source file like this:
-  % @tex
-  % \global\normaloffset = -6mm
-  % \global\bindingoffset = 10mm
-  % @end tex
-  \internalpagesizes{673.2pt}{160mm}% that's 51 lines
-                    {\voffset}{\hoffset}%
-                    {\bindingoffset}{44pt}%
-                    {297mm}{210mm}%
-  %
-  \tolerance = 700
-  \contentsrightmargin = 0pt
-  \defbodyindent = 5mm
-}}
-
-% Use @afivepaper to print on European A5 paper.
-% From romildo at urano.iceb.ufop.br, 2 July 2000.
-% He also recommends making @example and @lisp be small.
-\def\afivepaper{{\globaldefs = 1
-  \parskip = 2pt plus 1pt minus 0.1pt
-  \textleading = 12.5pt
-  %
-  \internalpagesizes{160mm}{120mm}%
-                    {\voffset}{\hoffset}%
-                    {\bindingoffset}{8pt}%
-                    {210mm}{148mm}%
-  %
-  \lispnarrowing = 0.2in
-  \tolerance = 800
-  \contentsrightmargin = 0pt
-  \defbodyindent = 2mm
-  \tableindent = 12mm
-}}
-
-% A specific text layout, 24x15cm overall, intended for A4 paper.
-\def\afourlatex{{\globaldefs = 1
-  \afourpaper
-  \internalpagesizes{237mm}{150mm}%
-                    {\voffset}{4.6mm}%
-                    {\bindingoffset}{7mm}%
-                    {297mm}{210mm}%
-  %
-  % Must explicitly reset to 0 because we call \afourpaper.
-  \globaldefs = 0
-}}
-
-% Use @afourwide to print on A4 paper in landscape format.
-\def\afourwide{{\globaldefs = 1
-  \afourpaper
-  \internalpagesizes{241mm}{165mm}%
-                    {\voffset}{-2.95mm}%
-                    {\bindingoffset}{7mm}%
-                    {297mm}{210mm}%
-  \globaldefs = 0
-}}
-
-% @pagesizes TEXTHEIGHT[,TEXTWIDTH]
-% Perhaps we should allow setting the margins, \topskip, \parskip,
-% and/or leading, also. Or perhaps we should compute them somehow.
-%
-\parseargdef\pagesizes{\pagesizesyyy #1,,\finish}
-\def\pagesizesyyy#1,#2,#3\finish{{%
-  \setbox0 = \hbox{\ignorespaces #2}\ifdim\wd0 > 0pt \hsize=#2\relax \fi
-  \globaldefs = 1
-  %
-  \parskip = 3pt plus 2pt minus 1pt
-  \setleading{\textleading}%
-  %
-  \dimen0 = #1\relax
-  \advance\dimen0 by \voffset
-  \advance\dimen0 by 1in % reference point for DVI is 1 inch from top of page
-  %
-  \dimen2 = \hsize
-  \advance\dimen2 by \normaloffset
-  \advance\dimen2 by 1in % reference point is 1 inch from left edge of page
-  %
-  \internalpagesizes{#1}{\hsize}%
-                    {\voffset}{\normaloffset}%
-                    {\bindingoffset}{44pt}%
-                    {\dimen0}{\dimen2}%
-}}
-
-% Set default to letter.
-%
-\letterpaper
-
-% Default value of \hfuzz, for suppressing warnings about overfull hboxes.
-\hfuzz = 1pt
-
-
-\message{and turning on texinfo input format.}
-
-\def^^L{\par} % remove \outer, so ^L can appear in an @comment
-
-% DEL is a comment character, in case @c does not suffice.
-\catcode`\^^? = 14
-
-% Define macros to output various characters with catcode for normal text.
-\catcode`\"=\other \def\normaldoublequote{"}
-\catcode`\$=\other \def\normaldollar{$}%$ font-lock fix
-\catcode`\+=\other \def\normalplus{+}
-\catcode`\<=\other \def\normalless{<}
-\catcode`\>=\other \def\normalgreater{>}
-\catcode`\^=\other \def\normalcaret{^}
-\catcode`\_=\other \def\normalunderscore{_}
-\catcode`\|=\other \def\normalverticalbar{|}
-\catcode`\~=\other \def\normaltilde{~}
-
-% This macro is used to make a character print one way in \tt
-% (where it can probably be output as-is), and another way in other fonts,
-% where something hairier probably needs to be done.
-%
-% #1 is what to print if we are indeed using \tt; #2 is what to print
-% otherwise.  Since all the Computer Modern typewriter fonts have zero
-% interword stretch (and shrink), and it is reasonable to expect all
-% typewriter fonts to have this, we can check that font parameter.
-%
-\def\ifusingtt#1#2{\ifdim \fontdimen3\font=0pt #1\else #2\fi}
-
-% Same as above, but check for italic font.  Actually this also catches
-% non-italic slanted fonts since it is impossible to distinguish them from
-% italic fonts.  But since this is only used by $ and it uses \sl anyway
-% this is not a problem.
-\def\ifusingit#1#2{\ifdim \fontdimen1\font>0pt #1\else #2\fi}
-
-% Set catcodes for Texinfo file
-
-% Active characters for printing the wanted glyph.
-% Most of these we simply print from the \tt font, but for some, we can
-% use math or other variants that look better in normal text.
-%
-\catcode`\"=\active
-\def\activedoublequote{{\tt\char34}}
-\let"=\activedoublequote
-\catcode`\~=\active \def\activetilde{{\tt\char126}} \let~ = \activetilde
-\chardef\hatchar=`\^
-\catcode`\^=\active \def\activehat{{\tt \hatchar}} \let^ = \activehat
-
-\catcode`\_=\active
-\def_{\ifusingtt\normalunderscore\_}
-\def\_{\leavevmode \kern.07em \vbox{\hrule width.3em height.1ex}\kern .07em }
-\let\realunder=_
-
-\catcode`\|=\active \def|{{\tt\char124}}
-
-\chardef \less=`\<
-\catcode`\<=\active \def\activeless{{\tt \less}}\let< = \activeless
-\chardef \gtr=`\>
-\catcode`\>=\active \def\activegtr{{\tt \gtr}}\let> = \activegtr
-\catcode`\+=\active \def+{{\tt \char 43}}
-\catcode`\$=\active \def${\ifusingit{{\sl\$}}\normaldollar}%$ font-lock fix
-\catcode`\-=\active \let-=\normaldash
-
-
-% used for headline/footline in the output routine, in case the page
-% breaks in the middle of an @tex block.
-\def\texinfochars{%
-  \let< = \activeless
-  \let> = \activegtr
-  \let~ = \activetilde 
-  \let^ = \activehat
-  \markupsetuplqdefault \markupsetuprqdefault 
-  \let\b = \strong
-  \let\i = \smartitalic
-  % in principle, all other definitions in \tex have to be undone too.
-}
-
-% Used sometimes to turn off (effectively) the active characters even after
-% parsing them.
-\def\turnoffactive{%
-  \normalturnoffactive
-  \otherbackslash
-}
-
-\catcode`\@=0
-
-% \backslashcurfont outputs one backslash character in current font,
-% as in \char`\\.
-\global\chardef\backslashcurfont=`\\
-
-% \realbackslash is an actual character `\' with catcode other.
-{\catcode`\\=\other @gdef at realbackslash{\}}
-
-% In Texinfo, backslash is an active character; it prints the backslash
-% in fixed width font.
-\catcode`\\=\active  % @ for escape char from now on.
-
-% Print a typewriter backslash.  For math mode, we can't simply use
-% \backslashcurfont: the story here is that in math mode, the \char
-% of \backslashcurfont ends up printing the roman \ from the math symbol
-% font (because \char in math mode uses the \mathcode, and plain.tex
-% sets \mathcode`\\="026E).  Hence we use an explicit \mathchar,
-% which is the decimal equivalent of "715c (class 7, e.g., use \fam;
-% ignored family value; char position "5C).  We can't use " for the
-% usual hex value because it has already been made active.
-
- at def@ttbackslash{{@tt @ifmmode @mathchar29020 @else @backslashcurfont @fi}}
- at let@backslashchar = @ttbackslash % @backslashchar{} is for user documents.
-
-% \otherbackslash defines an active \ to be a literal `\' character with
-% catcode other.
- at gdef@otherbackslash{@let\=@realbackslash}
-
-% Same as @turnoffactive except outputs \ as {\tt\char`\\} instead of
-% the literal character `\'.
-%
-{@catcode`- = @active
- @gdef at normalturnoffactive{%
-   @passthroughcharstrue
-   @let-=@normaldash
-   @let"=@normaldoublequote
-   @let$=@normaldollar %$ font-lock fix
-   @let+=@normalplus
-   @let<=@normalless
-   @let>=@normalgreater
-   @let^=@normalcaret
-   @let_=@normalunderscore
-   @let|=@normalverticalbar
-   @let~=@normaltilde
-   @let\=@ttbackslash
-   @markupsetuplqdefault
-   @markupsetuprqdefault
-   @unsepspaces
- }
-}
-
-% If a .fmt file is being used, characters that might appear in a file
-% name cannot be active until we have parsed the command line.
-% So turn them off again, and have @fixbackslash turn them back on.
- at catcode`+=@other @catcode`@_=@other
-
-% \enablebackslashhack - allow file to begin `\input texinfo'
-%
-% If a .fmt file is being used, we don't want the `\input texinfo' to show up.
-% That is what \eatinput is for; after that, the `\' should revert to printing
-% a backslash.
-% If the file did not have a `\input texinfo', then it is turned off after
-% the first line; otherwise the first `\' in the file would cause an error.
-% This is used on the very last line of this file, texinfo.tex.
-% We also use @c to call @fixbackslash, in case ends of lines are hidden.
-{
- at catcode`@^=7
- at catcode`@^^M=13 at gdef@enablebackslashhack{%
-  @global at let\ = @eatinput%
-  @catcode`@^^M=13%
-  @def at c{@fixbackslash at c}%
-  % Definition for the newline at the end of this file.
-  @def ^^M{@let^^M at secondlinenl}%
-  % Definition for a newline in the main Texinfo file.
-  @gdef @secondlinenl{@fixbackslash}%
-  % In case the first line has a whole-line command on it
-  @let at originalparsearg@parsearg
-  @def at parsearg{@fixbackslash at originalparsearg}
-}}
-
-{@catcode`@^=7 @catcode`@^^M=13%
- at gdef@eatinput input texinfo#1^^M{@fixbackslash}}
-
-% Emergency active definition of newline, in case an active newline token
-% appears by mistake.
-{@catcode`@^=7 @catcode13=13%
- at gdef@enableemergencynewline{%
-  @gdef^^M{%
-    @par%
-    %<warning: active newline>@par%
-}}}
-
-
- at gdef@fixbackslash{%
-  @ifx\@eatinput @let\ = @ttbackslash @fi
-  @catcode13=5 % regular end of line
-  @enableemergencynewline
-  @let at c=@comment
-  @let at parsearg@originalparsearg
-  % Also turn back on active characters that might appear in the input
-  % file name, in case not using a pre-dumped format.
-  @catcode`+=@active
-  @catcode`@_=@active
-  %
-  % If texinfo.cnf is present on the system, read it.
-  % Useful for site-wide @afourpaper, etc.  This macro, @fixbackslash, gets
-  % called at the beginning of every Texinfo file.  Not opening texinfo.cnf
-  % directly in this file, texinfo.tex, makes it possible to make a format
-  % file for Texinfo.
-  %
-  @openin 1 texinfo.cnf
-  @ifeof 1 @else @input texinfo.cnf @fi
-  @closein 1
-}
-
-
-% Say @foo, not \foo, in error messages.
- at escapechar = `@@
-
-% These (along with & and #) are made active for url-breaking, so need
-% active definitions as the normal characters.
- at def@normaldot{.}
- at def@normalquest{?}
- at def@normalslash{/}
-
-% These look ok in all fonts, so just make them not special.
-% @hashchar{} gets its own user-level command, because of #line.
- at catcode`@& = @other @def at normalamp{&}
- at catcode`@# = @other @def at normalhash{#}
- at catcode`@% = @other @def at normalpercent{%}
-
- at let @hashchar = @normalhash
-
- at c Finally, make ` and ' active, so that txicodequoteundirected and
- at c txicodequotebacktick work right in, e.g., @w{@code{`foo'}}.  If we
- at c don't make ` and ' active, @code will not get them as active chars.
- at c Do this last of all since we use ` in the previous @catcode assignments.
- at catcode`@'=@active
- at catcode`@`=@active
- at markupsetuplqdefault
- at markupsetuprqdefault
-
- at c Local variables:
- at c eval: (add-hook 'before-save-hook 'time-stamp)
- at c page-delimiter: "^\\\\message\\|emacs-page"
- at c time-stamp-start: "def\\\\texinfoversion{"
- at c time-stamp-format: "%:y-%02m-%02d.%02H"
- at c time-stamp-end: "}"
- at c End:
-
- at c vim:sw=2:
-
- at enablebackslashhack

Modified: trunk/doc/userdef.texi
===================================================================
--- trunk/doc/userdef.texi	2022-10-02 17:52:12 UTC (rev 54)
+++ trunk/doc/userdef.texi	2022-10-03 00:49:11 UTC (rev 55)
@@ -1439,7 +1439,7 @@
 @}
 @end example
 
- at noindent Sadly, we must define a new count register, @code{\subref},
+ at noindent We must define a new count register, @code{\subref},
 instead of using the scratch count register @code{\count255}, because
 @samp{#1} might include other macro calls which use @code{\count255}.
 
@@ -2188,7 +2188,7 @@
 and the @file{trimsee} script is placed in the current directory):
 
 @example
-prompt$ cat myfile.idx | makeindex | ./trimsee > myfile.ind
+$ cat myfile.idx | makeindex | ./trimsee >myfile.ind
 @end example
 
 By default, @file{trimsee} uses default page list separators and
@@ -2863,7 +2863,8 @@
 @file{miniltx.tex} (@url{https://ctan.org/pkg/miniltx}) from the
 @LaTeX{} graphics collection, written by David Carlisle and Sebastian
 Rahtz.  Eplain extends @file{miniltx.tex} to provide (primarily)
-support for package options.
+support for package options; in many cases, you can use
+ at file{miniltx.tex} directly without loading Eplain at all.
 
 @menu
 * The \usepackage command::           Command to load packages.
@@ -3044,8 +3045,7 @@
 @item
 install the new @file{supp-mis.tex} and @file{supp-pdf.tex} files in
 the relevant subdirectory of your local @file{texmf} tree (for info on
- at TeX{} directory structure see @url{https://tug.org/tds/} and
- at url{http://www.tex.ac.uk/@/cgi-bin/@/texfaq2html?label=tds});
+ at TeX{} directory structure, see @url{https://tug.org/tds/});
 
 @item
 upgrade your Con at TeX{}t installation.
@@ -3064,7 +3064,7 @@
 pdf at TeX{}, the cause may be an outdated pdf at TeX{} color and graphics
 driver @file{pdftex.def}.  The problem was fixed in @file{pdftex.def}
 version at tie{}0.03p.  You can obtain an up-to-date version from
- at url{http://ctan.org/pkg/pdftex-def}.@*
+ at url{https://ctan.org/pkg/graphics-def}.@*
 @strong{End of warning at tie{}2.}
 
 The @code{\fcolorbox} macro provided by the @code{color} package



More information about the tex-eplain-commits mailing list.