[OS X TeX] Re: MacOSX-TeX Digest #1761 - 06/14/06
Ben Tipping
btipping at fas.harvard.edu
Sun Jun 18 16:08:40 CEST 2006
I will be out of my office from 8 June 2006 to 20 June 2006 inclusive.
On Jun 14, 2006, at 8:00 PM, "TeX on Mac OS X Mailing List"
<MacOSX-TeX at email.esm.psu.edu> wrote:
> MacOSX-TeX Digest #1761 - Wednesday, June 14, 2006
>
> Re: [OS X TeX] TeXShop 2.10beta2
> by "Kino" <quinon at rio.odn.ne.jp>
> OT: But what suggestions do TeXShop users have for collaborative
> writing
> by "John Vokey" <vokey at uleth.ca>
> Re: [OS X TeX] TeXShop 2.10beta2
> by "Herbert Schulz" <herbs at wideopenwest.com>
> Re: [OS X TeX] typsetting in TeXShop
> by "jkock" <jkock at start.no>
> Re: [OS X TeX] vertical positioning within a cell of a table
> by "Ross Moore" <ross at ics.mq.edu.au>
> Two Texshop requests
> by "David Poole" <poole at cs.ubc.ca>
> Re: [OS X TeX] OT: But what suggestions do TeXShop users have for
> collabo
> by "Ross Moore" <ross at ics.mq.edu.au>
> Re: [OS X TeX] OT: But what suggestions do TeXShop users have for
> collabo
> by "Alex Scorpan" <scorpan at gmail.com>
> How to use cmr-super ?
> by "Alain Matthes" <alain.matthes at mac.com>
> Re: [OS X TeX] typsetting in TeXShop
> by "Peter Dyballa" <Peter_Dyballa at Web.DE>
> Re: [OS X TeX] How to use cmr-super ?
> by "Frank STENGEL" <fstengel at mac.com>
> Re: [OS X TeX] typsetting in TeXShop
> by "Maarten Sneep" <maarten.sneep at xs4all.nl>
> Re: [OS X TeX] OT: But what suggestions do TeXShop users have for
> collabo
> by "Maarten Sneep" <maarten.sneep at xs4all.nl>
> Re: [OS X TeX] How to use cmr-super ?
> by "Alain Matthes" <alain.matthes at mac.com>
> Re: [OS X TeX] Two Texshop requests
> by "Herbert Schulz" <herbs at wideopenwest.com>
> Re: [OS X TeX] How to use cmr-super ?
> by "Herbert Schulz" <herbs at wideopenwest.com>
> (OT) What is this? Should I worry?
> by "Herbert Schulz" <herbs at wideopenwest.com>
> Re: [OS X TeX] Need applescript
> by "George Gratzer" <gratzer at ms.umanitoba.ca>
> Re: [OS X TeX] Need applescript
> by "George Gratzer" <gratzer at ms.umanitoba.ca>
> Re: [OS X TeX] Need applescript
> by "George Gratzer" <gratzer at ms.umanitoba.ca>
> Re: [OS X TeX] Need applescript
> by "Maarten Sneep" <maarten.sneep at xs4all.nl>
> Re: [OS X TeX] (OT) What is this? Should I worry?
> by "Jonathan Kew" <jonathan_kew at sil.org>
> Re: [OS X TeX] (OT) What is this? Should I worry?
> by "Herbert Schulz" <herbs at wideopenwest.com>
> Alpha-TeXShop communication: solved
> by "Samuel Lelievre" <samuel.lelievre at univ-rennes1.fr>
> Re: [OS X TeX] Need applescript
> by "George Gratzer" <gratzer at ms.umanitoba.ca>
> Re: [OS X TeX] Need applescript
> by "Claus Gerhardt" <gerhardt at math.uni-heidelberg.de>
> Re: [OS X TeX] Need applescript
> by "George Gratzer" <gratzer at ms.umanitoba.ca>
> Problem with cocoAspell after migrating to Intel Mac -- and solution
> by "Matthias Damm" <macplanet at macnews.de>
> Re: [OS X TeX] How to use cmr-super ?
> by "Peter Dyballa" <Peter_Dyballa at Web.DE>
> Re: [OS X TeX] Need applescript
> by "Claus Gerhardt" <gerhardt at math.uni-heidelberg.de>
> Re: [OS X TeX] Need applescript
> by "Maarten Sneep" <maarten.sneep at xs4all.nl>
> Re: [OS X TeX] Need applescript
> by "George Gratzer" <gratzer at ms.umanitoba.ca>
> Re: [OS X TeX] Placing eps figures
> by "George Gratzer" <gratzer at ms.umanitoba.ca>
>
>
> ----------------------------------------------------------------------
>
> Subject: Re: [OS X TeX] TeXShop 2.10beta2
> From: "Kino" <quinon at rio.odn.ne.jp>
> Date: Wed, 14 Jun 2006 09:58:56 +0900
>
>
> On 14 Jun 2006, at 1:12, Herbert Schulz wrote:
>
>> is there a command that will tell TeXShop to re-center the view of
>> the document so that the cursor remains in view?
>
> How about control-l? "centerSelectionInVisibleArea:" in Cocoa apps.
>
>
> Kino
>
>
>
>
> ----------------------------------------------------------------------
>
> Subject: OT: But what suggestions do TeXShop users have for
> collaborative writing
> From: "John Vokey" <vokey at uleth.ca>
> Date: Tue, 13 Jun 2006 19:13:20 -0600
>
> All,
> Sorry for the OT post, but I was asked today, so I thought I would
> seek further input from other TeXShop users. When I write with
> multiple authors who also use LaTeX, we simply swap the .tex files
> back and forth, handling all changes and suggestions with in-line
> comments (i.e., nothing is ever deleted, just commented out). That
> seems to work well. For non-tex co-authors, I send compiled pdfs
> with in-line \marginpar{} for comments and suggestions, but, of
> course, their comments in return are just usually emailed text. I
> suppose CVS would work as well, but seems like overkill. Any other
> suggestions, especially something more TeX-like?
>
> --
> Please avoid sending me Word or PowerPoint attachments.
> See <http://www.gnu.org/philosophy/no-word-attachments.html>
>
> -Dr. John R. Vokey
>
>
>
>
> ----------------------------------------------------------------------
>
> Subject: Re: [OS X TeX] TeXShop 2.10beta2
> From: "Herbert Schulz" <herbs at wideopenwest.com>
> Date: Tue, 13 Jun 2006 20:14:34 -0500
>
>
> On Jun 13, 2006, at 7:58 PM, Kino wrote:
>
>> On 14 Jun 2006, at 1:12, Herbert Schulz wrote:
>>
>>> is there a command that will tell TeXShop to re-center the view of
>>> the document so that the cursor remains in view?
>>
>> How about control-l? "centerSelectionInVisibleArea:" in Cocoa apps.
>>
>>
>> Kino
>
> Howdy,
>
> Sorry... I meant an Applescript command to send to the front document.
>
> Good Luck,
>
> Herb Schulz
> (herbs at wideopenwest.com)
>
>
>
> ----------------------------------------------------------------------
>
> Subject: Re: [OS X TeX] typsetting in TeXShop
> From: "jkock" <jkock at start.no>
> Date: Wed, 14 Jun 2006 05:58:21 +0200 (CEST)
>
>> What I don't know how to do is to go to the error line in the
>> TextWrangler window directly from TeXShop's console. Any ideas?
>>
>> Thanks!
>>
>> Nestor Aguilera
>
> Hello Nestor,
>
> TeXShop sends the open-source-file-at-error-line instruction to the
> editor
> specified in the unix environment variable TEXEDIT.
>
> So the first question is whether TextWrangler is able to act as TEXEDIT
> target. Alpha, emacs and BBEdit can do this. For Alpha, the value of
> TEXEDIT should be
>
> /Applications/AlphaX/Tools/alphac +%d %s
>
> Since BBEdit is capable as well, there is a fair chance TextWrangler
> is too, but I don't know the precise details.
>
> The next question is how to set this environment variable -- this is
> nontrivial if it doesn't already work out of the box. The obvious idea
> from a unix viewpoint is just to write it in .profile or in .bashrc,
> but
> unfortunately, in general, GUI applications inherit their environment
> variables from the login-window process, which is not a child process
> of
> any of those that read .profile or .bashrc, so it will not respect
> those
> settings. There is a way to circumvent this by specifying the
> environment
> variables in a certain .plist file. Then it will be respected by all
> GUI
> applications. However, Gerben Wierda strongly discourages changing
> this
> file, because some of his own applications are fragile w.r.t.
> environment
> variables and expect certain default settings in order to work.
>
> Ideally, every process should take care of these variables on its own
> and
> set those that are wrong, to make sure that all child processes
> inherit the
> correct value.
>
> Alpha does this. As soon as it is launched it redefines TEXEDIT to the
> value above. This redefinition is private to Alpha and all its child
> processes. In particular, when in Alpha you press Cmd-T to typeset
> (with
> TeXShop say), TeXShop will be a child process of Alpha and hence
> inherit
> the desired value of TEXEDIT automatically, and know that 'e' in an
> error
> prompt should be directed to Alpha.
>
> TextWrangler should do the same, but I have no idea about how this is
> done
> in TextWrangler. Of course this is not something the end user should
> ever
> be confronted with, it ought to just work like this out of the box.
>
> Hope this helps.
>
> Cheers,
> Joachim.
>
>
> -----------------------------------------------------------------------
> --
> Start.no tilbyr nå raskere bredbånd til lavere pris.
> Sjekk http://www.start.no/bredband/ for mer informasjon
>
> ----------------------------------------------------------------------
>
> Subject: Re: [OS X TeX] vertical positioning within a cell of a table
> From: "Ross Moore" <ross at ics.mq.edu.au>
> Date: Wed, 14 Jun 2006 14:10:47 +1000
>
>
> On 14/06/2006, at 12:45 AM, Alain Schremmer wrote:
>
>> Here is a simple case
>>
>> Say I have a table with 1 row and 2 columns.
>> In the first column I have a tall graphics and in the second column
>> I have text.
>> The graphic and the text come out bottom-aligned.
>> How do I get, say, at least a top-alignment or a center alignment?
>
> For top-alignment, try the following:
>
> \framebox{%
> \begin{tabular}{p{.3\textwidth}p{.7\textwidth}}
> Here's some text about the image at right:
> &\null
> \vskip-\baselineskip
> \framebox{\includegraphics{....}}%
> \end{tabular}
> }% end of \framebox
>
>
> The \framebox bits are just so that you can see how the
> alignment is working. In practice you don't need them.
>
> This works because the alignment is on the *base-line*
> of the top-most piece of vertical material in each cell.
> The \null provides a blank line to align with the first
> line of text in the other cell. Then the negative \vskip
> moves up by the appropriate amount so that the box generated
> by \includegraphics seems to start at the top of the whole
> {tabular} environment.
>
>
> You can do it without the \vskip as follows:
>
> \framebox{%
> \begin{tabular}{p{.3\textwidth}p{.7\textwidth}}
> \null
> Here's some text about the image at right:
> &\null
> \framebox{\includegraphics{....}}%
> \end{tabular}
> }% end of \framebox
>
> so that there is alignment of the two \null s.
> However, this gives extra space above the {tabular}.
> (as is easily seen with the \framebox ).
>
>
>
> For centre-alignment, there's a standard package:
>
> \usepackage{array}
>
> \begin{tabular}{m{.3\textwidth}m{.7\textwidth}}
> Here's some text about the image at right:
> &\includegraphics{....}%
> \end{tabular}
>
>
>
>> It works (by vmoving the graphic in the first column!) but seems to
>> me rather clunky.
>
> That sort-of corresponds to my \vskip-\baselineskip ,
> but I don't have to guess by how much to move.
>
>
>>
>> Is that really all there is? (\vspace{xmm} after the text doesn't
>> have the effect I would have expected.)
>>
>
> I find the above methods easiest.
> You do have to provide fixed widths for the cells.
>
> In TeX terms, the cell contents are placed inside \vtop boxes
> filled with vertical material; i.e. paragraphing.
> These are provided by the cell declaration:
>
> p{<width>} --- for top alignment
>
> m{<width>} --- for middle alignment ( array.sty )
> b{<width>} --- for bottom alignment ( array.sty )
>
>
> If you just use simple cell declarations such as: c l r
> then you get TeX's alignment for a 1-line box (as if
> it were an \hbox ) for the cells.
> This alignment is by their natural baseline, which is
> usually at the bottom for \includegraphics .
>
>
>> Regards
>> --schremmer
>
>
> Hope this helps,
>
> Ross
>
>
> -----------------------------------------------------------------------
> -
> Ross Moore ross at maths.mq.edu.au
> Mathematics Department office: E7A-419
> Macquarie University tel: +61 +2 9850
> 8955
> Sydney, Australia 2109 fax: +61 +2 9850
> 8114
> -----------------------------------------------------------------------
> -
>
>
>
> ----------------------------------------------------------------------
>
> Subject: Two Texshop requests
> From: "David Poole" <poole at cs.ubc.ca>
> Date: Tue, 13 Jun 2006 21:33:40 -0700
>
> Thanks for the great tools for tex on my mac!
>
> I have two suggestions for Texshop that I think should not be too
> difficult to implement and will probably be widely appreciated:
>
> 1. fullscreen mode for showing the pdf. I often give presentations
> using
> beamer. It would be great if I could show the presentation in texshop,
> then when I want to edit a mistake, I can quickly go to the latex
> source, recompile it and keep going. This is useful for practise talks
> and also to show everyone who only knows powerpoint that alternatives
> are just as simple to use!
>
> 2. when there are two filenames with the same name, it would be great
> to
> show enough of the path to make them unique (as emacs does). We are
> writing a textbook with associated slides and have ch08/lect3.tex and
> ch12/lect3.tex, etc. It is surprising how often I have the same file
> open, but I can't find the file I want very easily when the "window"
> menu lists them as the same.
>
> Thanks!
> David
>
>
> ----------------------------------------------------------------------
>
> Subject: Re: [OS X TeX] OT: But what suggestions do TeXShop users have
> for collaborative writing
> From: "Ross Moore" <ross at ics.mq.edu.au>
> Date: Wed, 14 Jun 2006 15:10:55 +1000
>
> Hello John,
>
> On 14/06/2006, at 11:13 AM, John Vokey wrote:
>
>> All,
>> Sorry for the OT post, but I was asked today, so I thought I
>> would seek further input from other TeXShop users. When I write
>> with multiple authors who also use LaTeX, we simply swap the .tex
>> files back and forth, handling all changes and suggestions with in-
>> line comments (i.e., nothing is ever deleted, just commented out).
>> That seems to work well. For non-tex co-authors, I send compiled
>> pdfs with in-line \marginpar{} for comments and suggestions, but,
>> of course, their comments in return are just usually emailed text.
>> I suppose CVS would work as well, but seems like overkill. Any
>> other suggestions, especially something more TeX-like?
>
> \usepackage{soul} lets you do Strike-Out and Under-Line .
> That's a way of marking changes in the LaTeX source, with
> a clear visual effect within the PDF.
>
> This could be mixed with different colours to provide a kind
> of version-tracking setting.
> When it comes to the final version, you would only need to
> redefine \so and \ul to gobble/place there arguments, according
> to whether they are meant to be discarded or included.
>
>
> For larger segments such as whole paragraphs, then you could
> \usepackage{comment}
> and declare your own \includecomment and \excludecomment
> markup environments.
>
>
>
> Another possibility, if you have Acrobat Pro --- not expensive
> at academic pricing --- is to add text-annotations, or coloured
> lines/circles/ovals, or hand/mouse-drawn lines.
> This is what I do with students' work, while they are learning
> (La)TeX.
>
> Such annotations can be done in pdf-LaTeX, but they aren't so
> convenient to create and position, especially for something
> that is really just a 1-off. The point-&-click GUI of Acrobat
> is thus more appropriate for this kind of thing.
>
>
>>
>> --
>> Please avoid sending me Word or PowerPoint attachments.
>> See <http://www.gnu.org/philosophy/no-word-attachments.html>
>
> I never create them, so don't attach them. :-)
>
>>
>> -Dr. John R. Vokey
>
> Hope this helps,
>
> Ross
>
> -----------------------------------------------------------------------
> -
> Ross Moore ross at maths.mq.edu.au
> Mathematics Department office: E7A-419
> Macquarie University tel: +61 +2 9850
> 8955
> Sydney, Australia 2109 fax: +61 +2 9850
> 8114
> -----------------------------------------------------------------------
> -
>
>
>
> ----------------------------------------------------------------------
>
> Subject: Re: [OS X TeX] OT: But what suggestions do TeXShop users have
> for collaborative writing
> From: "Alex Scorpan" <scorpan at gmail.com>
> Date: Wed, 14 Jun 2006 01:48:00 -0400
>
>> Another possibility, if you have Acrobat Pro --- not expensive
>> at academic pricing --- is to add text-annotations, or coloured
>> lines/circles/ovals, or hand/mouse-drawn lines.
>> This is what I do with students' work, while they are learning
>> (La)TeX.
>>
>> Such annotations can be done in pdf-LaTeX, but they aren't so
>> convenient to create and position, especially for something
>> that is really just a 1-off. The point-&-click GUI of Acrobat
>> is thus more appropriate for this kind of thing.
>
> Note that some simple annotations can also be made in Apple's Preview.
>
> -- Alex
>
> ----------------------------------------------------------------------
>
> Subject: How to use cmr-super ?
> From: "Alain Matthes" <alain.matthes at mac.com>
> Date: Wed, 14 Jun 2006 10:45:13 +0200
>
> 1) I work with the last distribution of G. Wierda but i upgrade pdfetex
> (This is pdfeTeX, Version 3.141592-1.30.6-2.2 (Web2C 7.5.5))
>
> 2) and i work with files in utf8
> **************************************************************
> (/usr/local/teTeX/share/texmf.local/tex/latex/base/utf8.def
> (/usr/local/teTeX/share/texmf.local/tex/latex/base/t1enc.dfu)
> (/usr/local/teTeX/share/texmf.local/tex/latex/base/ot1enc.dfu)
>
> version of utf8 : 2006/03/30 v1.1i UTF-8 support for inputenc
> *************************************************************
>
> I made a try with the cmr-super ( from I-installer)
> first i use \usepackage[T1]{fontenc} but the .pdf file is very bad
> with Texniscope
>
> A) with \usepackage[T1]{fontenc}
>
> A1) the file :
>
> \documentclass[a4paper,10pt]{article}
> \usepackage[T1]{fontenc}
> \usepackage[utf8]{inputenc}
>
> \pagestyle{empty}
> \begin{document}
> test d'un problème avec cmr-super et \verb=\usepackage[T1]{fontenc}=
>
> \[ y=\ln(2x+3)\]
> \end{document}
>
> A2) the log
>
> (./try_cmr_with_T1.aux)
> (/usr/local/teTeX/share/texmf.local/tex/latex/base/t1cmtt.fd) [1{/
> Users/ego/Lib
> rary/texmf/fonts/map/pdftex/updmap/pdftex.map}] (./
> try_cmr_with_T1.aux) )</usr/
> local/teTeX/share/texmf.tetex/fonts/type1/bluesky/cm/cmr10.pfb></usr/
> local/teTe
> X/share/texmf.tetex/fonts/type1/bluesky/cm/cmmi10.pfb>
>
> </var/tmp/texfonts/pk/lj
> four/jknappen/ec/ectt1000.600pk> </var/tmp/texfonts/pk/ljfour/
> jknappen/ec/ecrm1
> 000.600pk> why this ???
>
> A3) look at the font in Acrobat reader
>
> Acrobat font properties :
>
> cmmi10 type 1
> cmr10 type1
> F15 Type 3 police réelle F15
> F16 Type 3 police réelle F16
>
> B) without \usepackage[T1]{fontenc}
>
> B1) the file :
>
> \documentclass[a4paper,10pt]{article}
> \usepackage[utf8]{inputenc}
>
> \pagestyle{empty}
> \begin{document}
> test d'un problème avec cmr-super et \verb=\usepackage[T1]{fontenc}=
>
> \[ y=\ln(2x+3)\]
> \end{document}
>
> B2) the log
>
> (./try_cmr_without_T1.aux) [1{/Users/ego/Library/texmf/fonts/map/
> pdftex/updmap/
> pdftex.map}] (./try_cmr_without_T1.aux) )</usr/local/teTeX/share/
> texmf.tetex/fo
> nts/type1/bluesky/cm/cmmi10.pfb></usr/local/teTeX/share/texmf.tetex/
> fonts/type1
> /bluesky/cm/cmtt10.pfb></usr/local/teTeX/share/texmf.tetex/fonts/
> type1/bluesky/
> cm/cmr10.pfb>
>
> B3) look at the font in Acrobat reader
> Acrobat font properties :
>
> cmmi10 type 1
> cmr10 type1
> cmtt10 type1
>
> Why the second possibity is best ?
>
> Perhaps i've a problem with my installation ?
>
> Thanks Alain Matthes
> ----------------------------------------------------------------------
>
> Subject: Re: [OS X TeX] typsetting in TeXShop
> From: "Peter Dyballa" <Peter_Dyballa at Web.DE>
> Date: Wed, 14 Jun 2006 10:33:29 +0200
>
>
> Am 14.06.2006 um 05:58 schrieb jkock:
>
>> The next question is how to set this environment variable -- this is
>> nontrivial if it doesn't already work out of the box. The obvious
>> idea
>> from a unix viewpoint is just to write it in .profile or
>> in .bashrc, but
>> unfortunately, in general, GUI applications inherit their environment
>> variables from the login-window process, which is not a child
>> process of
>> any of those that read .profile or .bashrc, so it will not respect
>> those
>> settings. There is a way to circumvent this by specifying the
>> environment
>> variables in a certain .plist file. Then it will be respected by
>> all GUI
>> applications. However, Gerben Wierda strongly discourages changing
>> this
>> file, because some of his own applications are fragile w.r.t.
>> environment
>> variables and expect certain default settings in order to work.
>
> Gerben Wierda's i-Installer has learned from this disasters and does
> not get fooled by false settings any more.
>
> If you do not have the file ~/.MacOSX/environment.plist yet, you'd
> need to invoke on the command line
>
> mkdir ~/.MacOSX
>
> and then create and edit the file ~/.MacOSX/environment.plist with
> something like
>
> defaults write ~/.MacOSX/environment.plist TEXEDIT "/Applications/
> AlphaX/Tools/alphac +%d %s"
>
> To check what's in the file: 'defaults read ~/.MacOSX/environment'
>
> To remove a specific key/value pair: 'defaults delete ~/.MacOSX/
> environment.plist TEXEDIT'
>
>
> With Apple's DeveloperTools package (and Xcode updates too?) comes /
> Developer/Applications/Utilities/Property List Editor.app. The Public
> Domain offers other GUIs like PlistEdit Pro (http://homepage.mac.com/
> bwebster/plisteditpro.html), PrefSetter (http://homepage.mac.com/
> darkshadow02/apps.htm#prefsetter) and the PLTools (http://
> www.macorchard.com/PLTools/) for the command line.
>
> --
> Greetings
>
> Pete
>
> "They're putting dimes in the hole in my head to see the change in me."
>
>
>
> ----------------------------------------------------------------------
>
> Subject: Re: [OS X TeX] How to use cmr-super ?
> From: "Frank STENGEL" <fstengel at mac.com>
> Date: Wed, 14 Jun 2006 11:04:37 +0000
>
>
> Le 14 juin 06 à 08:45, Alain Matthes a écrit :
>
> <cutting>
>
>> I made a try with the cmr-super ( from I-installer)
>> first i use \usepackage[T1]{fontenc} but the .pdf file is very bad
>> with Texniscope
>>
>> A) with \usepackage[T1]{fontenc}
>>
>> A1) the file :
>>
>> \documentclass[a4paper,10pt]{article}
>> \usepackage[T1]{fontenc}
>> \usepackage[utf8]{inputenc}
>>
>> \pagestyle{empty}
>> \begin{document}
>> test d'un problème avec cmr-super et \verb=\usepackage[T1]{fontenc}=
>>
>> \[ y=\ln(2x+3)\]
>> \end{document}
>>
>> A2) the log
>>
>> (./try_cmr_with_T1.aux)
>> (/usr/local/teTeX/share/texmf.local/tex/latex/base/t1cmtt.fd) [1{/
>> Users/ego/Lib
>> rary/texmf/fonts/map/pdftex/updmap/pdftex.map}] (./
>> try_cmr_with_T1.aux) )</usr/
>> local/teTeX/share/texmf.tetex/fonts/type1/bluesky/cm/cmr10.pfb></
>> usr/local/teTe
>> X/share/texmf.tetex/fonts/type1/bluesky/cm/cmmi10.pfb>
>>
>> </var/tmp/texfonts/pk/lj
>> four/jknappen/ec/ectt1000.600pk> </var/tmp/texfonts/pk/ljfour/
>> jknappen/ec/ecrm1
>> 000.600pk> why this ???
>
> This is the root of the problem: the cm-super fonts are not seen by
> pdftex. Pdftex is creating bitmap versions of the cm fonts in the T1
> encoding (actually the ec fonts). This could explain the ugly
> appearance of your documents.
>
> How did you install cm-super?
> Did you try updating maps manually using an updmap instead of an
> updmap-sys?
> Did you try using the tex i-Intaller to simply configure the font
> maps (use the ``configure only''button and select only ``update font
> mappings'' when asked to select tasks to be performed)...
>
>
> <snip>
>> B) without \usepackage[T1]{fontenc}
>>
>> B1) the file :
>>
>> \documentclass[a4paper,10pt]{article}
>> \usepackage[utf8]{inputenc}
>>
>> \pagestyle{empty}
>> \begin{document}
>> test d'un problème avec cmr-super et \verb=\usepackage[T1]{fontenc}=
>>
>> \[ y=\ln(2x+3)\]
>> \end{document}
>>
>> B2) the log
>>
>> (./try_cmr_without_T1.aux) [1{/Users/ego/Library/texmf/fonts/map/
>> pdftex/updmap/
>> pdftex.map}] (./try_cmr_without_T1.aux) )</usr/local/teTeX/share/
>> texmf.tetex/fo
>> nts/type1/bluesky/cm/cmmi10.pfb></usr/local/teTeX/share/texmf.tetex/
>> fonts/type1
>> /bluesky/cm/cmtt10.pfb></usr/local/teTeX/share/texmf.tetex/fonts/
>> type1/bluesky/
>> cm/cmr10.pfb>
>
> <snap>
>
>> Why the second possibity is best ?
>
> Because the "old" font encoding scheme (OT1) is used and only outline
> fonts are loaded.
>
>> Perhaps i've a problem with my installation ?
>
> Yes, see above...
>
>
>
> --
> Frank STENGEL (fstengel<at>mac.com)
>
>
> ----------------------------------------------------------------------
>
> Subject: Re: [OS X TeX] typsetting in TeXShop
> From: "Maarten Sneep" <maarten.sneep at xs4all.nl>
> Date: Wed, 14 Jun 2006 13:56:57 +0200
>
>
> On 14-jun-2006, at 5:58, jkock wrote:
>
>>> What I don't know how to do is to go to the error line in the
>>> TextWrangler window directly from TeXShop's console. Any ideas?
>>>
>>> Thanks!
>>>
>>> Nestor Aguilera
>>
>> Hello Nestor,
>>
>> TeXShop sends the open-source-file-at-error-line instruction to the
>> editor
>> specified in the unix environment variable TEXEDIT.
>>
>> So the first question is whether TextWrangler is able to act as
>> TEXEDIT
>> target. Alpha, emacs and BBEdit can do this. For Alpha, the value of
>> TEXEDIT should be
>>
>> /Applications/AlphaX/Tools/alphac +%d %s
>>
>> Since BBEdit is capable as well, there is a fair chance TextWrangler
>> is too, but I don't know the precise details.
>
> For TextWrangler, provided the command line tool is installed (see
> the preferences in TW):
> /usr/bin/edit +%d %s
>
> For BBEdit:
> /usr/bin/bbedit +%d %s
>
>> There is a way to circumvent this by specifying the environment
>> variables in a certain .plist file. Then it will be respected by
>> all GUI
>> applications. However, Gerben Wierda strongly discourages changing
>> this
>> file, because some of his own applications are fragile w.r.t.
>> environment
>> variables and expect certain default settings in order to work.
>
> I think you have to be careful (setting TEXINPUTS is a very bad
> idea). However, setting TEXEDIT _should_ not harm other applications.
>
>> Ideally, every process should take care of these variables on its
>> own and
>> set those that are wrong, to make sure that all child processes
>> inherit the
>> correct value.
>
> Agreed, and I think it would be a very good idea if TeXShop adds this
> in the preferences, with a default suitable to do it self (and having
> a command-line utility would be of tremendous help).
>
>> TextWrangler should do the same, but I have no idea about how this
>> is done
>> in TextWrangler. Of course this is not something the end user
>> should ever
>> be confronted with, it ought to just work like this out of the box.
>
> The Bare Bones folks encourage the use of said environment.plist
> file, so it is unlikely to work without using this system.
>
> Maarten
>
> ----------------------------------------------------------------------
>
> Subject: Re: [OS X TeX] OT: But what suggestions do TeXShop users have
> for collaborative writing
> From: "Maarten Sneep" <maarten.sneep at xs4all.nl>
> Date: Wed, 14 Jun 2006 13:58:29 +0200
>
> On 14-jun-2006, at 3:13, John Vokey wrote:
>
>> Sorry for the OT post, but I was asked today, so I thought I
>> would seek further input from other TeXShop users. When I write
>> with multiple authors who also use LaTeX, we simply swap the .tex
>> files back and forth, handling all changes and suggestions with in-
>> line comments (i.e., nothing is ever deleted, just commented out).
>> That seems to work well. For non-tex co-authors, I send compiled
>> pdfs with in-line \marginpar{} for comments and suggestions, but,
>> of course, their comments in return are just usually emailed text.
>> I suppose CVS would work as well, but seems like overkill. Any
>> other suggestions, especially something more TeX-like?
>
> latexdiff is really nice. You just need the "before" and "after"
> versions of the latex sources, and you get a nicely formatted diff
> file. I usually define a special command that inserts my comments in
> a different colour.
>
> Maarten
>
> ----------------------------------------------------------------------
>
> Subject: Re: [OS X TeX] How to use cmr-super ?
> From: "Alain Matthes" <alain.matthes at mac.com>
> Date: Wed, 14 Jun 2006 14:47:24 +0200
>
>
> Le 14 juin 06 à 13:04, Frank STENGEL a écrit :
>
>>> A) with \usepackage[T1]{fontenc}
>>>
>>> A1) the file :
>>>
>>> \documentclass[a4paper,10pt]{article}
>>> \usepackage[T1]{fontenc}
>>> \usepackage[utf8]{inputenc}
>>>
>>> \pagestyle{empty}
>>> \begin{document}
>>> test d'un problème avec cmr-super et \verb=\usepackage[T1]{fontenc}=
>>>
>>> \[ y=\ln(2x+3)\]
>>> \end{document}
>>>
>>> A2) the log
>>>
>>> (./try_cmr_with_T1.aux)
>>> (/usr/local/teTeX/share/texmf.local/tex/latex/base/t1cmtt.fd) [1{/
>>> Users/ego/Lib
>>> rary/texmf/fonts/map/pdftex/updmap/pdftex.map}] (./
>>> try_cmr_with_T1.aux) )</usr/
>>> local/teTeX/share/texmf.tetex/fonts/type1/bluesky/cm/cmr10.pfb></
>>> usr/local/teTe
>>> X/share/texmf.tetex/fonts/type1/bluesky/cm/cmmi10.pfb>
>>>
>>> </var/tmp/texfonts/pk/lj
>>> four/jknappen/ec/ectt1000.600pk> </var/tmp/texfonts/pk/ljfour/
>>> jknappen/ec/ecrm1
>>> 000.600pk> why this ???
>>
>> This is the root of the problem: the cm-super fonts are not seen by
>> pdftex. Pdftex is creating bitmap versions of the cm fonts in the
>> T1 encoding (actually the ec fonts). This could explain the ugly
>> appearance of your documents.
>>
>> How did you install cm-super?
>
> I-installer
>
>> Did you try updating maps manually using an updmap instead of an
>> updmap-sys?
>
> I found the problem :
>
> in /usr/local/teTeX/share/texmf.local/web2c/updmap.cfg
> i've
>
> MixedMap cm-super-t1.map
> MixedMap cm-super-ts1.map
> MixedMap cm-super-t2a.map
> MixedMap cm-super-t2b.map
> MixedMap cm-super-t2c.map
> MixedMap cm-super-x2.map
>
> but not in "/Users/ego/Library/texmf/web2c/updmap.cfg"
>
> I copied the preceding lines in this file and I made : sudo updmap
>
> now all is okay ! thanks
>
>
>> Did you try using the tex i-Intaller to simply configure the font
>> maps (use the ``configure only''button and select only ``update
>> font mappings'' when asked to select tasks to be performed)...
>
> no perhaps a mistake :(
>
> Greetings Alain Matthes
> ----------------------------------------------------------------------
>
> Subject: Re: [OS X TeX] Two Texshop requests
> From: "Herbert Schulz" <herbs at wideopenwest.com>
> Date: Wed, 14 Jun 2006 08:06:14 -0500
>
>
> On Jun 13, 2006, at 11:33 PM, David Poole wrote:
>
>> Thanks for the great tools for tex on my mac!
>>
>> I have two suggestions for Texshop that I think should not be too
>> difficult to implement and will probably be widely appreciated:
>>
>> 1. fullscreen mode for showing the pdf. I often give presentations
>> using beamer. It would be great if I could show the presentation in
>> texshop, then when I want to edit a mistake, I can quickly go to
>> the latex source, recompile it and keep going. This is useful for
>> practise talks and also to show everyone who only knows powerpoint
>> that alternatives are just as simple to use!
>>
>> 2. when there are two filenames with the same name, it would be
>> great to show enough of the path to make them unique (as emacs
>> does). We are writing a textbook with associated slides and have
>> ch08/lect3.tex and ch12/lect3.tex, etc. It is surprising how often
>> I have the same file open, but I can't find the file I want very
>> easily when the "window" menu lists them as the same.
>>
>> Thanks!
>> David
>
> Howdy,
>
> Nice ideas. Since TeXShop is now a sourceforge project it is best to
> make feature requests at <http://sourceforge.net/tracker/?
> group_id=155796&atid=797241>, the projects Feature Request page. I
> actually see that item (1) has been requested already (did you do
> that? it is anonymous.) but I didn't see (2) there. It's a good idea
> to get a sourceforge login; easy and safe and then they'll know who
> sent it and get more information if needed.
>
> Good Luck,
>
> Herb Schulz
> (herbs at wideopenwest.com)
>
>
>
> ----------------------------------------------------------------------
>
> Subject: Re: [OS X TeX] How to use cmr-super ?
> From: "Herbert Schulz" <herbs at wideopenwest.com>
> Date: Wed, 14 Jun 2006 08:17:48 -0500
>
>
> On Jun 14, 2006, at 7:47 AM, Alain Matthes wrote:
>
>>
>> I found the problem :
>>
>> in /usr/local/teTeX/share/texmf.local/web2c/updmap.cfg
>> i've
>>
>> MixedMap cm-super-t1.map
>> MixedMap cm-super-ts1.map
>> MixedMap cm-super-t2a.map
>> MixedMap cm-super-t2b.map
>> MixedMap cm-super-t2c.map
>> MixedMap cm-super-x2.map
>>
>> but not in "/Users/ego/Library/texmf/web2c/updmap.cfg"
>>
>> I copied the preceding lines in this file and I made : sudo updmap
>>
>> now all is okay ! thanks
>>
>>
>
> Howdy,
>
> And updmap vs updmap-sys bites again! :-), :-(!
>
> Good Luck,
>
> Herb Schulz
> (herbs at wideopenwest.com)
>
>
>
> ----------------------------------------------------------------------
>
> Subject: (OT) What is this? Should I worry?
> From: "Herbert Schulz" <herbs at wideopenwest.com>
> Date: Wed, 14 Jun 2006 08:36:32 -0500
>
> Howdy,
>
> Sorry to get off topic but I happened to be looking in /var/tmp/
> (don't ask) and saw a socket named com.apple.dnbrecruiter and a file
> called recruiterd.pid which contains the the PID of python (I'm the
> owner of these files and this process) running under bfobserver
> (Owned by root). I have no idea what these do so I wonder if someone
> on the list would know or have an idea where I might find out.
>
> Good Luck,
>
> Herb Schulz
> (herbs at wideopenwest.com)
>
>
>
> ----------------------------------------------------------------------
>
> Subject: Re: [OS X TeX] Need applescript
> From: "George Gratzer" <gratzer at ms.umanitoba.ca>
> Date: Wed, 14 Jun 2006 09:16:07 -0500
>
> Actually, both Acrobat Reader and Acrobat Professional have "current
> page" as an option in the print dialog box.
>
> GG
>
> On Jun 13, 2006, at 3:54 PM, Maarten Sneep wrote:
>
>> On 13 Jun 2006, at 7:36, George Gratzer wrote:
>>
>>> I would need an applescript that does the following:
>>>
>>> I have a folder, open, the frontmost folder, say called slim.
>>>
>>> In the folder, there is a pdf file, open, say on page 7.
>>>
>>> The applescript should delete pages 1 - 6 and 8 - end of slim.pdf,
>>> so slim.pdf is only one page, the old page 7.
>>
>> Impossible: none of the PDF viewers will report to you which pdf is
>> open, or which page it is showing.
>>
>>> Can somebody help?
>>
>> Sorry,
>>
>> Maarten
>> ------------------------- Info --------------------------
>> Mac-TeX Website: http://www.esm.psu.edu/mac-tex/
>> & FAQ: http://latex.yauh.de/faq/
>> TeX FAQ: http://www.tex.ac.uk/faq
>> List Archive: http://tug.org/pipermail/macostex-archives/
>>
>
>
> ----------------------------------------------------------------------
>
> Subject: Re: [OS X TeX] Need applescript
> From: "George Gratzer" <gratzer at ms.umanitoba.ca>
> Date: Wed, 14 Jun 2006 09:16:51 -0500
>
> Thanks, this is possibly the best way to proceeds.
>
> GG
>
> On Jun 13, 2006, at 4:17 PM, Themis Matsoukas wrote:
>
>> On Jun 13, 2006, at 4:54 PM, Maarten Sneep wrote:
>>
>>> On 13 Jun 2006, at 7:36, George Gratzer wrote:
>>>
>>>> I would need an applescript that does the following:
>>>>
>>>> I have a folder, open, the frontmost folder, say called slim.
>>>>
>>>> In the folder, there is a pdf file, open, say on page 7.
>>>>
>>>> The applescript should delete pages 1 - 6 and 8 - end of
>>>> slim.pdf, so slim.pdf is only one page, the old page 7.
>>>
>>> Impossible: none of the PDF viewers will report to you which pdf
>>> is open, or which page it is showing.
>>>
>>>> Can somebody help?
>>
>> A naive suggestion - why not just print page 7 into a pdf file?
>>
>> Themis
>> ------------------------- Info --------------------------
>> Mac-TeX Website: http://www.esm.psu.edu/mac-tex/
>> & FAQ: http://latex.yauh.de/faq/
>> TeX FAQ: http://www.tex.ac.uk/faq
>> List Archive: http://tug.org/pipermail/macostex-archives/
>>
>
>
> ----------------------------------------------------------------------
>
> Subject: Re: [OS X TeX] Need applescript
> From: "George Gratzer" <gratzer at ms.umanitoba.ca>
> Date: Wed, 14 Jun 2006 09:19:45 -0500
>
>
> On Jun 13, 2006, at 4:17 PM, Peter Dyballa wrote:
>
>> wouldn't it be easier to print just this page into a PDF file?
>> This could be a job for Automator ...
>>
>
>
> One problem: TeXShop does not have print current page.
>
> GG
>
>
>
> ----------------------------------------------------------------------
>
> Subject: Re: [OS X TeX] Need applescript
> From: "Maarten Sneep" <maarten.sneep at xs4all.nl>
> Date: Wed, 14 Jun 2006 16:52:10 +0200
>
> On 14-jun-2006, at 16:16, George Gratzer wrote:
>
>> Actually, both Acrobat Reader and Acrobat Professional have
>> "current page" as an option in the print dialog box.
>
> And the reader (at least) does not have an AppleScript dictionary, so
> it cannot be used from within AppleScript (unless you count user
> interface scripting (and I don't).
>
> Maarten
>
>
> ----------------------------------------------------------------------
>
> Subject: Re: [OS X TeX] (OT) What is this? Should I worry?
> From: "Jonathan Kew" <jonathan_kew at sil.org>
> Date: Wed, 14 Jun 2006 15:53:19 +0100
>
> On 14 Jun 2006, at 2:36 pm, Herbert Schulz wrote:
>
>> Howdy,
>>
>> Sorry to get off topic but I happened to be looking in /var/tmp/
>> (don't ask) and saw a socket named com.apple.dnbrecruiter and a
>> file called recruiterd.pid which contains the the PID of python
>> (I'm the owner of these files and this process) running under
>> bfobserver (Owned by root). I have no idea what these do so I
>> wonder if someone on the list would know or have an idea where I
>> might find out.
>
> Guess you've installed XCode 2.3; this sounds like part of the
> Network Builds subsystem. Unless you're in a big software-building
> environment, you probably don't have any use for it. Nothing to worry
> about, though.
>
> JK
>
>
> ----------------------------------------------------------------------
>
> Subject: Re: [OS X TeX] (OT) What is this? Should I worry?
> From: "Herbert Schulz" <herbs at wideopenwest.com>
> Date: Wed, 14 Jun 2006 09:54:01 -0500
>
>
> On Jun 14, 2006, at 8:36 AM, Herbert Schulz wrote:
>
>> Howdy,
>>
>> Sorry to get off topic but I happened to be looking in /var/tmp/
>> (don't ask) and saw a socket named com.apple.dnbrecruiter and a
>> file called recruiterd.pid which contains the the PID of python
>> (I'm the owner of these files and this process) running under
>> bfobserver (Owned by root). I have no idea what these do so I
>> wonder if someone on the list would know or have an idea where I
>> might find out.
>>
>> Good Luck,
>>
>> Herb Schulz
>> (herbs at wideopenwest.com)
>>
>
> Howdy,
>
> Just looked it up on the ADC site and it is related to Xcode 2.3.
>
> Good Luck,
>
> Herb Schulz
> (herbs at wideopenwest.com)
>
>
>
> ----------------------------------------------------------------------
>
> Subject: Alpha-TeXShop communication: solved
> From: "Samuel Lelievre" <samuel.lelievre at univ-rennes1.fr>
> Date: Wed, 14 Jun 2006 16:06:57 +0100
>
>
> The Alpha-TeXShop communication problem I mentioned earlier
> on this list (in the "TeXShop 2.10-beta" thread) is solved,
> here are the details for anyone interested and for the sake
> of having the topic complete in the list archive.
>
>
> The observation was that when latexing mydoc.tex with Alpha
> (I love Alpha's TeX interface), with mydoc.pdf displayed in
> TeXShop, the preview did not update.
> I observed this with AlphaX 8.0.2 and TeXShop 2.10-beta but
> things were working fine with 8.0.1 and 2.09d.
>
> It turns out there were two problems.
> - Changing TeXShop to 2.10-beta, the AutoPreviewUpdate pref
> got unchecked.
> - Things should have worked even with AutoPreviewUpdate off
> because Alpha sends an explicit refresh command to TeXShop,
> but it turned out that Applescript commands were ignored by
> the new TeXShop 2.10-beta.
>
> Both problems are solved with TeXShop 2.10-beta2: upgrading
> now keeps the pref checked, and the new beta now takes into
> account the refresh command Alpha sends it, so that preview
> update happens whether AutoPreviewUpdate is on or off, when
> Alpha sends a modified mydoc.pdf.
>
> AlphaX 8.0.2 and its excellent TeX interface work perfectly
> just as they did in 8.0.1.
>
> Thanks to Richard Koch for a quick release of TeXShop-beta2
> and many thanks to him and Joachim Kock for off-line emails
> which helped determine what was going wrong.
>
> Happy TeXing to all!
> Samuel
>
>
> ----------------------------------------------------------------------
>
> Subject: Re: [OS X TeX] Need applescript
> From: "George Gratzer" <gratzer at ms.umanitoba.ca>
> Date: Wed, 14 Jun 2006 10:24:23 -0500
>
> How about Acrobat Pro?
>
> GG
>
> On Jun 14, 2006, at 9:52 AM, Maarten Sneep wrote:
>
>> On 14-jun-2006, at 16:16, George Gratzer wrote:
>>
>>> Actually, both Acrobat Reader and Acrobat Professional have
>>> "current page" as an option in the print dialog box.
>>
>> And the reader (at least) does not have an AppleScript dictionary,
>> so it cannot be used from within AppleScript (unless you count user
>> interface scripting (and I don't).
>>
>> Maarten
>>
>> ------------------------- Info --------------------------
>> Mac-TeX Website: http://www.esm.psu.edu/mac-tex/
>> & FAQ: http://latex.yauh.de/faq/
>> TeX FAQ: http://www.tex.ac.uk/faq
>> List Archive: http://tug.org/pipermail/macostex-archives/
>>
>
>
> ----------------------------------------------------------------------
>
> Subject: Re: [OS X TeX] Need applescript
> From: "Claus Gerhardt" <gerhardt at math.uni-heidelberg.de>
> Date: Wed, 14 Jun 2006 18:08:40 +0200
>
> George,
>
> A week or so ago, when you raised a similar request by asking for a
> convenient way to select a page from a pdf document converting it to
> a ps document and open the latter by Illustrator, I sent you an
> Applescript solution which worked perfectly on my side - apart from
> Illustrator which I don't own - but didn't work in your set up.
>
> From your latest request I learnt that your document has the same
> basename as the folder it is in which causes the failure as I
> checked, for reasons that I can only guess and but won't pursue
> further.
>
> Thus, my advice is to try my old script and using different names for
> your file(s) and folder.
>
> Claus
>
>
> On Jun 13, 2006, at 7:36, George Gratzer wrote:
>
>> I would need an applescript that does the following:
>>
>> I have a folder, open, the frontmost folder, say called slim.
>>
>> In the folder, there is a pdf file, open, say on page 7.
>>
>> The applescript should delete pages 1 - 6 and 8 - end of slim.pdf,
>> so slim.pdf is only one page, the old page 7.
>>
>> Can somebody help?
>>
>> GG
>> ------------------------- Info --------------------------
>> Mac-TeX Website: http://www.esm.psu.edu/mac-tex/
>> & FAQ: http://latex.yauh.de/faq/
>> TeX FAQ: http://www.tex.ac.uk/faq
>> List Archive: http://tug.org/pipermail/macostex-archives/
>>
>
>
> ----------------------------------------------------------------------
>
> Subject: Re: [OS X TeX] Need applescript
> From: "George Gratzer" <gratzer at ms.umanitoba.ca>
> Date: Wed, 14 Jun 2006 12:11:16 -0500
>
> Claus,
>
> The first dialog box is:
>
>
> Your selection for file # 1. The file will be saved as slim-1.pdf.
>
>
> What am I supposed to respond?
>
> GG
>
> On Jun 14, 2006, at 11:08 AM, Claus Gerhardt wrote:
>
>> George,
>>
>> A week or so ago, when you raised a similar request by asking for a
>> convenient way to select a page from a pdf document converting it
>> to a ps document and open the latter by Illustrator, I sent you an
>> Applescript solution which worked perfectly on my side - apart from
>> Illustrator which I don't own - but didn't work in your set up.
>>
>> From your latest request I learnt that your document has the same
>> basename as the folder it is in which causes the failure as I
>> checked, for reasons that I can only guess and but won't pursue
>> further.
>>
>> Thus, my advice is to try my old script and using different names
>> for your file(s) and folder.
>>
>> Claus
>>
>>
>> On Jun 13, 2006, at 7:36, George Gratzer wrote:
>>
>>> I would need an applescript that does the following:
>>>
>>> I have a folder, open, the frontmost folder, say called slim.
>>>
>>> In the folder, there is a pdf file, open, say on page 7.
>>>
>>> The applescript should delete pages 1 - 6 and 8 - end of slim.pdf,
>>> so slim.pdf is only one page, the old page 7.
>>>
>>> Can somebody help?
>>>
>>> GG
>>> ------------------------- Info --------------------------
>>> Mac-TeX Website: http://www.esm.psu.edu/mac-tex/
>>> & FAQ: http://latex.yauh.de/faq/
>>> TeX FAQ: http://www.tex.ac.uk/faq
>>> List Archive: http://tug.org/pipermail/macostex-archives/
>>>
>>
>> ------------------------- Info --------------------------
>> Mac-TeX Website: http://www.esm.psu.edu/mac-tex/
>> & FAQ: http://latex.yauh.de/faq/
>> TeX FAQ: http://www.tex.ac.uk/faq
>> List Archive: http://tug.org/pipermail/macostex-archives/
>>
>
>
> ----------------------------------------------------------------------
>
> Subject: Problem with cocoAspell after migrating to Intel Mac -- and
> solution
> From: "Matthias Damm" <macplanet at macnews.de>
> Date: Wed, 14 Jun 2006 19:15:23 +0200
>
> Hello everybody,
>
> I experienced some problem with CocoAspell after migrating to my
> Intel Macbook and thought some people here might find the solution
> useful:
>
> I had migrated from an iBook via Apple's migration assistant, so I
> had an old PPC version of CocoAspell on the system which did not work
> any more.
> But it turned out that I was unable to update to the Intel version
> using the installer:
> The installer updated the English language files, but the GNU Aspell
> and the Spelling packages were greyed out.
>
> In the end I was able to solve the problem by removing the receipt
> files from the old installers (which had been migrated by the
> migration tool as well) -- afterwards the installer worked fine, and
> cocoAspell works great again now.
>
> The following files have to be deleted:
> /Library/Receipts/aspell.pkg
> /Library/Receipts/Spelling.pkg
>
> Anton Leuski has already confirmed the problem.
>
> Best regards,
> Matthias
>
> --
> Matthias Damm
> mad at macpla.net
> PGP key: http://macpla.net/MatthiasDamm.asc
> PGP fingerprint: CED3 6074 7F7D 3148 C6F3 DFF2 05FF 3A0B 0D12 4D41
>
>
> ----------------------------------------------------------------------
>
> Subject: Re: [OS X TeX] How to use cmr-super ?
> From: "Peter Dyballa" <Peter_Dyballa at Web.DE>
> Date: Wed, 14 Jun 2006 19:22:11 +0200
>
>
> Am 14.06.2006 um 14:47 schrieb Alain Matthes:
>
>> but not in "/Users/ego/Library/texmf/web2c/updmap.cfg"
>>
>> I copied the preceding lines in this file and I made : sudo updmap
>
> It's not OK to use sudo to update one's own files.
>
>
>
> For the other readers and owners of private MAP files: you do need,
> i.e. you *must* invoke 'updmap --enable Map=<mapfilefragment>' after
> you've installed fonts and MAP file fragments with i-Installer in the
> system's tree.
>
> --
> Greetings
>
> Pete
>
> The problem with the French is that they don't have a word for
> «entrepreneur». - George W. Bush
>
>
>
>
> ----------------------------------------------------------------------
>
> Subject: Re: [OS X TeX] Need applescript
> From: "Claus Gerhardt" <gerhardt at math.uni-heidelberg.de>
> Date: Wed, 14 Jun 2006 19:22:45 +0200
>
> The page number(s), e.g., if you want a single page, then it is the
> first page number that appears in the tool bar of TS's pdf window.
>
> Claus
>
>
> On Jun 14, 2006, at 19:11, George Gratzer wrote:
>
>> Claus,
>>
>> The first dialog box is:
>>
>>
>> Your selection for file # 1. The file will be saved as slim-1.pdf.
>>
>>
>> What am I supposed to respond?
>>
>> GG
>>
>> On Jun 14, 2006, at 11:08 AM, Claus Gerhardt wrote:
>>
>>> George,
>>>
>>> A week or so ago, when you raised a similar request by asking for
>>> a convenient way to select a page from a pdf document converting
>>> it to a ps document and open the latter by Illustrator, I sent you
>>> an Applescript solution which worked perfectly on my side - apart
>>> from Illustrator which I don't own - but didn't work in your set up.
>>>
>>> From your latest request I learnt that your document has the same
>>> basename as the folder it is in which causes the failure as I
>>> checked, for reasons that I can only guess and but won't pursue
>>> further.
>>>
>>> Thus, my advice is to try my old script and using different names
>>> for your file(s) and folder.
>>>
>>> Claus
>>>
>>>
>>> On Jun 13, 2006, at 7:36, George Gratzer wrote:
>>>
>>>> I would need an applescript that does the following:
>>>>
>>>> I have a folder, open, the frontmost folder, say called slim.
>>>>
>>>> In the folder, there is a pdf file, open, say on page 7.
>>>>
>>>> The applescript should delete pages 1 - 6 and 8 - end of
>>>> slim.pdf, so slim.pdf is only one page, the old page 7.
>>>>
>>>> Can somebody help?
>>>>
>>>> GG
>>>> ------------------------- Info --------------------------
>>>> Mac-TeX Website: http://www.esm.psu.edu/mac-tex/
>>>> & FAQ: http://latex.yauh.de/faq/
>>>> TeX FAQ: http://www.tex.ac.uk/faq
>>>> List Archive: http://tug.org/pipermail/macostex-archives/
>>>>
>>>
>>> ------------------------- Info --------------------------
>>> Mac-TeX Website: http://www.esm.psu.edu/mac-tex/
>>> & FAQ: http://latex.yauh.de/faq/
>>> TeX FAQ: http://www.tex.ac.uk/faq
>>> List Archive: http://tug.org/pipermail/macostex-archives/
>>>
>>
>> ------------------------- Info --------------------------
>> Mac-TeX Website: http://www.esm.psu.edu/mac-tex/
>> & FAQ: http://latex.yauh.de/faq/
>> TeX FAQ: http://www.tex.ac.uk/faq
>> List Archive: http://tug.org/pipermail/macostex-archives/
>>
>
>
> ----------------------------------------------------------------------
>
> Subject: Re: [OS X TeX] Need applescript
> From: "Maarten Sneep" <maarten.sneep at xs4all.nl>
> Date: Wed, 14 Jun 2006 19:34:01 +0200
>
> On 14-jun-2006, at 17:24, George Gratzer wrote:
>
>> How about Acrobat Pro?
>
> I don't know, I don't have the money to buy it. But it probably
> requires user interaction, as Adobe would like you to buy the server
> product at €20.000 or so. It will never be smooth (by design).
>
> Maarten
> --
> A: Because it messes up the order in which people normally read text.
> Q: Why is top-posting such a bad thing?
> A: Top-posting.
> Q: What is the most annoying thing on a mailing list?
>
>
>
> ----------------------------------------------------------------------
>
> Subject: Re: [OS X TeX] Need applescript
> From: "George Gratzer" <gratzer at ms.umanitoba.ca>
> Date: Wed, 14 Jun 2006 13:37:39 -0500
>
> Unfortunately, no change.
>
> I responded 9
>
> do shell script shellScript
>
> gives the error message as before.
>
> GG
>
> On Jun 14, 2006, at 12:22 PM, Claus Gerhardt wrote:
>
>> The page number(s), e.g., if you want a single page, then it is the
>> first page number that appears in the tool bar of TS's pdf window.
>>
>> Claus
>>
>>
>> On Jun 14, 2006, at 19:11, George Gratzer wrote:
>>
>>> Claus,
>>>
>>> The first dialog box is:
>>>
>>>
>>> Your selection for file # 1. The file will be saved as slim-1.pdf.
>>>
>>>
>>> What am I supposed to respond?
>>>
>>> GG
>>>
>>> On Jun 14, 2006, at 11:08 AM, Claus Gerhardt wrote:
>>>
>>>> George,
>>>>
>>>> A week or so ago, when you raised a similar request by asking for
>>>> a convenient way to select a page from a pdf document converting
>>>> it to a ps document and open the latter by Illustrator, I sent
>>>> you an Applescript solution which worked perfectly on my side -
>>>> apart from Illustrator which I don't own - but didn't work in
>>>> your set up.
>>>>
>>>> From your latest request I learnt that your document has the
>>>> same basename as the folder it is in which causes the failure as
>>>> I checked, for reasons that I can only guess and but won't
>>>> pursue further.
>>>>
>>>> Thus, my advice is to try my old script and using different names
>>>> for your file(s) and folder.
>>>>
>>>> Claus
>>>>
>>>>
>>>> On Jun 13, 2006, at 7:36, George Gratzer wrote:
>>>>
>>>>> I would need an applescript that does the following:
>>>>>
>>>>> I have a folder, open, the frontmost folder, say called slim.
>>>>>
>>>>> In the folder, there is a pdf file, open, say on page 7.
>>>>>
>>>>> The applescript should delete pages 1 - 6 and 8 - end of
>>>>> slim.pdf, so slim.pdf is only one page, the old page 7.
>>>>>
>>>>> Can somebody help?
>>>>>
>>>>> GG
>>>>> ------------------------- Info --------------------------
>>>>> Mac-TeX Website: http://www.esm.psu.edu/mac-tex/
>>>>> & FAQ: http://latex.yauh.de/faq/
>>>>> TeX FAQ: http://www.tex.ac.uk/faq
>>>>> List Archive: http://tug.org/pipermail/macostex-archives/
>>>>>
>>>>
>>>> ------------------------- Info --------------------------
>>>> Mac-TeX Website: http://www.esm.psu.edu/mac-tex/
>>>> & FAQ: http://latex.yauh.de/faq/
>>>> TeX FAQ: http://www.tex.ac.uk/faq
>>>> List Archive: http://tug.org/pipermail/macostex-archives/
>>>>
>>>
>>> ------------------------- Info --------------------------
>>> Mac-TeX Website: http://www.esm.psu.edu/mac-tex/
>>> & FAQ: http://latex.yauh.de/faq/
>>> TeX FAQ: http://www.tex.ac.uk/faq
>>> List Archive: http://tug.org/pipermail/macostex-archives/
>>>
>>
>> ------------------------- Info --------------------------
>> Mac-TeX Website: http://www.esm.psu.edu/mac-tex/
>> & FAQ: http://latex.yauh.de/faq/
>> TeX FAQ: http://www.tex.ac.uk/faq
>> List Archive: http://tug.org/pipermail/macostex-archives/
>>
>
>
> ----------------------------------------------------------------------
>
> Subject: Re: [OS X TeX] Placing eps figures
> From: "George Gratzer" <gratzer at ms.umanitoba.ca>
> Date: Wed, 14 Jun 2006 18:18:39 -0500
>
> Gary,
>
> I had to label some 12 diagrams today, and your method is really
> effective. I used eps files, so I did not have to crop, TeX Font
> Outliner.app did all the work.
>
> Thanks,
>
> GG
>
> On Jun 3, 2006, at 6:18 PM, Gary L. Gray wrote:
>
>>
>> On Jun 3, 2006, at 3:23 PM, George Gratzer wrote:
>>
>>> What I still miss, is the saving on a typeset page in Illustrator
>>> format. There was a lot of discussion on this in this forum, but
>>> nothing quite works.
>>
>> We have written two AppleScripts apps (that use Ghostscript and
>> pdfcrop) that make labeling figures much like it was in the
>> Textures. The general idea is that you can create the labels in
>> a .tex file, convert the fonts in the resulting .pdf file to
>> Postscript outlines, open that .ps file in AI, and then copy and
>> post those outlines in the AI figure file. The steps are as follows:
>>
>> (1) Create your figure in AI and save it as "Adobe PDF (pdf)". I
>> will assume it is called "test.pdf".
>>
>> (2) Create the labels for your figure in a .tex file. I will assume
>> it is called "labels.tex".
>>
>> (3) Typeset the labels.tex file and then drop the resulting
>> labels.pdf file on "TeX Font Outliner.app"
>>
>> (4) After you drop the .pdf file on "TeX Font Outliner.app", the
>> resulting .ps file will automatically open in AI. Copy the labels
>> from the .ps file and place them labels in the fig you saved in
>> part (1), i.e., in test.pdf
>>
>> (5) Move the labels into position and save test.pdf.
>>
>> (6) Drop test.pdf onto "PDF Cropper.app". This will rename test.pdf
>> to test-AI.pdf (so that you will have your original file for later
>> editing) and then it will crop that file by removing all white
>> space and it will name the cropped file test.pdf.
>>
>> That's all there is too it. I have placed the apps at:
>>
>> http://www.esm.psu.edu/mac-tex/PDF-Processing-Apps.zip
>>
>> if you want to try them out (I have only tested this with AI CS2).
>> They are universal binary.
>>
>> I hope this is useful.
>>
>> -- Gary
>> ------------------------- Info --------------------------
>> Mac-TeX Website: http://www.esm.psu.edu/mac-tex/
>> & FAQ: http://latex.yauh.de/faq/
>> TeX FAQ: http://www.tex.ac.uk/faq
>> List Archive: http://tug.org/pipermail/macostex-archives/
>>
>
>
> ----------------------------------------------------------------------
> End of MacOSX-TeX Digest
>
> ------------------------- Info --------------------------
> Mac-TeX Website: http://www.esm.psu.edu/mac-tex/
> & FAQ: http://latex.yauh.de/faq/
> TeX FAQ: http://www.tex.ac.uk/faq
> List Archive: http://tug.org/pipermail/macostex-archives/
------------------------- Info --------------------------
Mac-TeX Website: http://www.esm.psu.edu/mac-tex/
& FAQ: http://latex.yauh.de/faq/
TeX FAQ: http://www.tex.ac.uk/faq
List Archive: http://tug.org/pipermail/macostex-archives/
More information about the macostex-archives
mailing list