FW: BibTex

[Ganz, Frank, SV USA]

-----Original Message-----
From: Ganz, Frank, SV USA
Sent: Thursday, July 08, 2004 2:01 PM
To: 'Support for users of Y&Y's TeX system'
Subject: RE: BibTex




You are running plain TeX on final.aux, not a .tex file. .aux files are usually produced by LaTeX alone. Are you sure you want to run plain TeX at all?

As for point 1, adding the code to dviwindo.ini resolved the issue I suppose?

Thanks,
Frank

>-----Original Message-----
>From: J. Gregory McDaniel [mailto:jgm at BU.EDU]
>Sent: Thursday, July 08, 2004 1:34 PM
>To: YANDYTEX at LISTS.UCC.IE
>Subject: BibTex
>
>
>Hi,
>
>I've encountered some strange issues trying to use BibTex from DVIwindo
>(Version 2.2.2, under windows xp).
>
>1. After trying all kinds of installations, bibtex never appears as an
>option under the "tex" menu.  This contradicts what I've read in
>bibtex-install.txt:
>
>" b. In the [Applications] portion of the file, you should already
>      have:
>
>      BiBTeX|F4=C:\YANDY\BIBTEX\bibtex.exe @.aux"
>
>2. After adding the above command and following the other well-written
>instructions in bibtex-install.txt, I get the following error:
>
>"This is TeX, Version 3.14159 (Y&Y TeX 2.2.2) (format=plain
>2000.2.24)  2004
>JUL 8 13:31
>**c:/jgm/cause/reports/final/final.aux
>(C:/yandy/YANDYTEX/FMT/plain.fmt)
>(c:/jgm/cause/reports/final/final.aux
>! Undefined control sequence.
>l.2 \bibstyle
>             {unsrt}
>?
>! Undefined control sequence.
>l.3 \citation
>             {McDaniel_1}
>?
>! Emergency stop.
>l.3 \citation
>             {McDaniel_1}
>End of file on the terminal!
>
>No pages of output."
>
>I have confirmed that the command being issued is
>"C:\YANDY\BIBTEX\bibtex.bat @.aux", which does not appear to call tex.
>However, as you can see the error message seems to indicate
>tex was called.
> I am pasting my DVIWindo.ini file below.
>
>Any help or advice would be greatly appreciated.
>
>Thanks,
>Greg McDaniel
>----------------
>
>;Installed: 07/08/04 9:15:47
>[Registration]
>Name=J. Gregory McDaniel
>Company=Boston University
>Serial=1113
>[Documents]
>DummyEntry=1
>File1="c:\jgm\cause\reports\final\final.dvi"
>File2="C:\yandy\dviwindo\dvi_help.dvi"
>File3="C:\yandy\dviwindo\truetype.dvi"
>[Window]
>DummyEntry=1
>Save=1
>Size=0 0 1280 940 1
>Preferences=0 0 0 0 0 0 1 1 1 0 1 0 1 1 1 0 1 0 0 1 1 1 0 0 0
>1 1 1 0 1 0 0
>1 1 1
>Preferences2=1 1 0 0 0 1 0 1 0
>Mapping=0 0 0
>FontMapping=0 0 0
>Defaults=c:\jgm\cause\reports\final\ final.dvi .dvi
>TestSize=400
>Filters=1 1
>Units=pt
>QuerySize=230 477 503 513
>FileName=final.dvi
>SourceDefaults=c:\jgm\cause\reports\final\ *.tex .tex
>SourceFileName=final.aux
>[Environment]
>DummyEntry=1
>BIBINPUT=c:\yandy\bibtex\bib;c:\yandy\bibtex\contrib
>BSTINPUT=c:\yandy\bibtex\bst;c:\yandy\bibtex\contrib
>CSFINPUT=c:\yandy\bibtex\csf;c:\yandy\bibtex\contrib
>BIBTEX_CSFILE=3D88591lat.csf
>ENCODING=TEXNANSI
>TEXFORMATS=C:\yandy\YANDYTEX\FMT
>VECPATH=C:\yandy\FONTS\ENCODING
>PREPATH=C:\yandy\DVIPSONE
>SUBPATH=C:\yandy\DVIPSONE\SUB
>PSPATH=C:\YANDY\TEXINPUT;C:\YANDY\PS
>PSFONTS=C:\WINDOWS\fonts
>TEXPOOL=C:\yandy\YANDYTEX\FMT
>TEXINPUTS=C:\YANDY\TEXINPUT;C:\YANDY\TEX\BASE\\
>PLAIN=C:\YANDY\TEXINPUT;C:\YANDY\TEX\BASE\\
>AMSTEX=C:\YANDY\TEXINPUT;C:\YANDY\TEX\BASE\\
>YANDYPATH=C:\yandy
>TEXFONTS=C:\YANDY\FONTS\TFM\TEXNANSI\TFM;C:\YANDY\FONTS\TFM\NON
>TEXT\;C:\YANDY\FONTS\TFM\TEXNANSI\
>TEXNANSI=C:\YANDY\FONTS\TFM\TEXNANSI\TFM;C:\YANDY\FONTS\TFM\NON
>TEXT\;C:\YANDY\FONTS\TFM\TEXNANSI\
>TEX256=C:\YANDY\FONTS\TFM\TEX256\TFM;C:\YANDY\FONTS\TFM\NONTEXT
>\;C:\YANDY\FONTS\TFM\TEX256\
>ANSINEW=C:\YANDY\FONTS\TFM\ANSINEW\TFM;C:\YANDY\FONTS\TFM\NONTE
>XT\;C:\YANDY\FONTS\TFM\ANSINEW\
>STANDARD=C:\YANDY\FONTS\TFM\STANDARD\TFM;C:\YANDY\FONTS\TFM\NON
>TEXT\;C:\YANDY\FONTS\TFM\STANDARD\
>TEXTEXT=C:\YANDY\FONTS\TFM\TEXTEXT\TFM;C:\YANDY\FONTS\TFM\NONTE
>XT\;C:\YANDY\FONTS\TFM\TEXTEXT\
>LPLAIN=C:\YANDY\TEXINPUT;C:\YANDY\TEX\BASE\\;C:\YANDY\TEX\LATEX209\\
>LATEX=C:\YANDY\TEXINPUT;C:\YANDY\TEX\BASE\\;C:\YANDY\TEX\LATEX\
>\;C:\JGM\TEXINPUT\\
>[Applications]
>DummyEntry=1
>Help|F1=C:\yandy\dviwindo\dviwindo.exe C:\yandy\dviwindo\dvi_help.dvi
>DOS (Full Screen)|F2=C:\yandy\dviwindo\dosprmpt.pif
>DOS (Windowed)|F3=C:\yandy\dviwindo\doswinpt.pif
>BiBTeX|F4=C:\YANDY\BIBTEX\bibtex.bat @.aux
>Separator1=Line
>DVIPSONE|F12=C:\YANDY\DVIPSONE\DVIPSONE.BAT -d=LPT1 *
>Separator3=Line
>iniTeX|F9=C:\YANDY\YANDYTEX\INITEX.BAT "Format Source
>File|plain" "Format
>Menu Name|TeX"
>Separator4=Line
>plain TeX|F5=C:\YANDY\YANDYTEX\TEX.BAT @.tex
>AMSTeX|F6=C:\YANDY\YANDYTEX\TEX.BAT +amstex @.tex
>LaTeX 2.09|F7=C:\YANDY\YANDYTEX\TEX.BAT +lplain @.tex
>LaTeX|F8=C:\YANDY\YANDYTEX\TEX.BAT +latex @.tex
>[Diagnostics]
>Windows=5.1 Build: 2600 Platform: Windows 2000 CSD: Service Pack 1
>Vector=C:\yandy\FONTS\ENCODING\texnansi.vec
>Config=Win 95: 0, Win 98: 0, Win NT: 1, New Shell: 1, W2K: 1,
>ATM loaded: 0,
>TTF usable: 1
>Screen=32 BitsPerPixel, 1 Plane, 24 ColorRes, 0 True Color, 96
>x 96 logical
>dpi on 1280 x 1024 screen
>Version=2.2.2
>Faces=240
>LastTeX=C:\YANDY\BIBTEX\bibtex.bat c:\jgm\cause\reports\final\final.aux
>LastWinExe=C:\yandy\dviwindo\dosprmpt.pif
>