texlive[61170] Master: hep-math (27nov21)
commits+karl at tug.org
commits+karl at tug.org
Sat Nov 27 22:23:37 CET 2021
Revision: 61170
http://tug.org/svn/texlive?view=revision&revision=61170
Author: karl
Date: 2021-11-27 22:23:37 +0100 (Sat, 27 Nov 2021)
Log Message:
-----------
hep-math (27nov21)
Modified Paths:
--------------
trunk/Master/tlpkg/bin/tlpkg-ctan-check
Added Paths:
-----------
trunk/Master/texmf-dist/doc/latex/hep-math/
trunk/Master/texmf-dist/doc/latex/hep-math/README-hep-math.md
trunk/Master/texmf-dist/doc/latex/hep-math/README.md
trunk/Master/texmf-dist/doc/latex/hep-math/bibliography.bib
trunk/Master/texmf-dist/doc/latex/hep-math/hep-math-documentation.pdf
trunk/Master/texmf-dist/doc/latex/hep-math/hep-math-documentation.tex
trunk/Master/texmf-dist/doc/latex/hep-math/hep-math-implementation.pdf
trunk/Master/texmf-dist/doc/latex/hep-math/hep-math-test.tex
trunk/Master/texmf-dist/doc/latex/hep-math/license.md
trunk/Master/texmf-dist/source/latex/hep-math/
trunk/Master/texmf-dist/source/latex/hep-math/hep-math-implementation.dtx
trunk/Master/texmf-dist/source/latex/hep-math/hep-math.ins
trunk/Master/texmf-dist/tex/latex/hep-math/
trunk/Master/texmf-dist/tex/latex/hep-math/hep-math.sty
trunk/Master/tlpkg/tlpsrc/hep-math.tlpsrc
Added: trunk/Master/texmf-dist/doc/latex/hep-math/README-hep-math.md
===================================================================
--- trunk/Master/texmf-dist/doc/latex/hep-math/README-hep-math.md (rev 0)
+++ trunk/Master/texmf-dist/doc/latex/hep-math/README-hep-math.md 2021-11-27 21:23:37 UTC (rev 61170)
@@ -0,0 +1,21 @@
+
+
+# The `hep-math` package
+
+Extended math macros
+
+## Introduction
+
+The `hep-math` package provides some additional features beyond the `mathtools` and `amsmath` packages.
+
+To use the package place `\usepackage{hep-math}` in the preamble.
+
+## Author
+
+Jan Hajer
+
+## License
+
+This file may be distributed and/or modified under the conditions of the `LaTeX` Project Public License, either version 1.3c of this license or (at your option) any later version.
+The latest version of this license is in `http://www.latex-project.org/lppl.txt` and version 1.3c or later is part of all distributions of LaTeX version 2005/12/01 or later.
+
Property changes on: trunk/Master/texmf-dist/doc/latex/hep-math/README-hep-math.md
___________________________________________________________________
Added: svn:eol-style
## -0,0 +1 ##
+native
\ No newline at end of property
Added: trunk/Master/texmf-dist/doc/latex/hep-math/README.md
===================================================================
--- trunk/Master/texmf-dist/doc/latex/hep-math/README.md (rev 0)
+++ trunk/Master/texmf-dist/doc/latex/hep-math/README.md 2021-11-27 21:23:37 UTC (rev 61170)
@@ -0,0 +1,21 @@
+
+
+# The `hep-math` package
+
+Extended math macros
+
+## Introduction
+
+The `hep-math` package provides some additional features beyond the `mathtools` and `amsmath` packages.
+
+To use the package place `\usepackage{hep-math}` in the preamble.
+
+## Author
+
+Jan Hajer
+
+## License
+
+This file may be distributed and/or modified under the conditions of the `LaTeX` Project Public License, either version 1.3c of this license or (at your option) any later version.
+The latest version of this license is in `http://www.latex-project.org/lppl.txt` and version 1.3c or later is part of all distributions of LaTeX version 2005/12/01 or later.
+
Property changes on: trunk/Master/texmf-dist/doc/latex/hep-math/README.md
___________________________________________________________________
Added: svn:eol-style
## -0,0 +1 ##
+native
\ No newline at end of property
Added: trunk/Master/texmf-dist/doc/latex/hep-math/bibliography.bib
===================================================================
--- trunk/Master/texmf-dist/doc/latex/hep-math/bibliography.bib (rev 0)
+++ trunk/Master/texmf-dist/doc/latex/hep-math/bibliography.bib 2021-11-27 21:23:37 UTC (rev 61170)
@@ -0,0 +1,1055 @@
+ at article{hep-paper,
+title = "The |hep-paper| package",
+subtitle = "Publications in high energy physics",
+author = "Jan Hajer",
+year = "2019",
+eprinttype = "ctan",
+eprint = "hep-paper",
+related = "hep-paper-1",
+}
+
+ at manual{hep-paper-1,
+doi = "10.5281/zenodo.3606436",
+eprinttype = "github",
+eprintclass = "janhajer",
+eprint = "hep-paper",
+}
+
+ at article{hep-acronym,
+title = "The |hep-acronym| package",
+subtitle = "An acronym extension for glossaries",
+author = "Jan Hajer",
+year = "2021",
+eprinttype = "ctan",
+eprint = "hep-acronyms",
+related = "hep-paper-1",
+}
+
+ at article{hep-bibliography,
+title = "The |hep-bibliography| package",
+subtitle = "Bibliographies for high energy physics",
+author = "Jan Hajer",
+year = "2021",
+eprinttype = "ctan",
+eprint = "hep-bibliography",
+related = "hep-paper-1",
+}
+
+ at article{hep-float,
+title = "The |hep-float| package",
+subtitle = "Convenience package for float placement",
+author = "Jan Hajer",
+year = "2021",
+eprinttype = "ctan",
+eprint = "hep-float",
+related = "hep-paper-1",
+}
+
+ at article{hep-font,
+title = "The |hep-font| package",
+subtitle = "Latin modern extended by computer modern",
+author = "Jan Hajer",
+year = "2021",
+eprinttype = "ctan",
+eprint = "hep-font",
+related = "hep-paper-1",
+}
+
+ at article{hep-math-font,
+title = "The |hep-math-font| package",
+subtitle = "Extended Greek and sans serif math",
+author = "Jan Hajer",
+year = "2021",
+eprinttype = "ctan",
+eprint = "hep-math-font",
+related = "hep-paper-1",
+}
+
+ at article{hep-math,
+title = "The |hep-math| package",
+subtitle = "Extended math macros",
+author = "Jan Hajer",
+year = "2021",
+eprinttype = "ctan",
+eprint = "hep-math",
+related = "hep-paper-1",
+}
+
+ at article{hep-text,
+title = "The |hep-text| package",
+subtitle = "List and text extensions",
+author = "Jan Hajer",
+year = "2021",
+eprinttype = "ctan",
+eprint = "hep-text",
+related = "hep-paper-1",
+}
+
+ at article{hep-title,
+title = "The |hep-title| package",
+subtitle = "Extensions for the title page",
+author = "Jan Hajer",
+year = "2021",
+eprinttype = "ctan",
+eprint = "hep-title",
+related = "hep-paper-1",
+}
+
+ at article{kvoptions,
+title = "The |kvoptions| package",
+subtitle = "Key value format for package options",
+author = "Heiko Oberdiek",
+year = "2004",
+eprinttype = "ctan",
+eprint = "kvoptions",
+related = "kvoptions-1",
+}
+
+ at manual{kvoptions-1,
+eprinttype = "github",
+eprintclass = "ho-tex",
+eprint = "kvoptions",
+}
+
+ at article{cleveref,
+title = "The |cleveref| package",
+subtitle = "Intelligent cross-referencing",
+author = "Toby Cubitt",
+date = "2006",
+url = "http://dr-qubit.org/cleveref",
+eprinttype = "ctan",
+eprint = "cleveref",
+}
+
+ at article{foreign,
+title = "The |foreign| package for \hologo{LaTeX2e}",
+subtitle = "Systematic treatment of \enquote{foreign} words in documents",
+author = "Philip G. Ratcliffe",
+date = "2012",
+eprinttype = "ctan",
+eprint = "foreign",
+}
+
+ at article{geometry,
+title = "The |geometry| package",
+subtitle = "Flexible and complete interface to document dimensions",
+author = "David Carlisle and Hideo Umeki",
+date = "1996",
+eprinttype = "ctan",
+eprint = "geometry",
+related = "geometry-1",
+}
+
+ at manual{geometry-1,
+eprinttype = "github",
+eprintclass = "davidcarlisle",
+eprint = "geometry",
+}
+
+ at article{a4wide,
+title = "The |a4wide| package",
+subtitle = "\enquote{Wide} a4 layout",
+author = "Alexander Holt and Jean-François Lamy",
+date = "1986",
+eprinttype = "ctan",
+eprint = "a4wide",
+note = "depreciated and not used",
+}
+
+ at article{microtype,
+title = "The |microtype| package",
+subtitle = "Subliminal refinements towards typographical perfection",
+author = "Robert Schlicht",
+date = "2004",
+eprinttype = "ctan",
+eprint = "microtype",
+}
+
+ at article{authblk,
+title = "A \hologo{LaTeX} Package to Prepare Author and Affiliation Blocks",
+subtitle = "Support for footnote style author/affiliation",
+author = "Patrick W. Daly",
+date = "2001",
+eprinttype = "ctan",
+eprint = "authblk",
+}
+
+ at article{bm,
+title = "The |bm| package",
+subtitle = "Access bold symbols in maths mode",
+author = "David Carlisle and Frank Mittelbach",
+collaboration = "\hologo{LaTeX} Team",
+date = "1993",
+eprinttype = "ctan",
+eprint = "bm",
+}
+
+ at article{empheq,
+title = "The |empheq| package",
+author = "Lars Madsen and Morten Høgholm and Will Robertson and Joseph Wright",
+eprinttype = "ctan",
+eprint = "empheq",
+}
+
+ at article{mathtools,
+title = "The |mathtools| package",
+subtitle = "Mathematical tools to use with |amsmath|",
+author = "Lars Madsen and Morten Høgholm and Will Robertson and Joseph Wright",
+date = "2004",
+eprinttype = "ctan",
+eprint = "mathtools",
+}
+
+ at article{amsmath,
+title = "The |amsmath| package",
+subtitle = "AMS mathematical facilities for \hologo{LaTeX}",
+collaboration = "\hologo{LaTeX} Team",
+date = "1994",
+url = "https://ams.org/tex/amslatex",
+eprinttype = "ctan",
+eprint = "amsmath",
+}
+
+ at article{amstext,
+title = "The |amstext| package",
+subtitle = "Typeset text fragments in mathematics",
+collaboration = "\hologo{LaTeX} Team",
+date = "1995",
+url = "https://ams.org/tex/amslatex",
+eprinttype = "ctan",
+eprint = "amstext",
+}
+
+ at article{amsfonts,
+title = "The |amsfonts| package",
+subtitle = "\hologo{TeX} fonts from the American Mathematical Society",
+author = "Michael Downes and David M. Jones and Frank Mittelbach and Rainer Schöpf",
+collaboration = "American Mathematical Society",
+date = "1995",
+url = "https://ams.org/tex/amsfonts",
+eprinttype = "ctan",
+eprint = "amsfonts",
+}
+
+ at article{amssymb,
+title = "The |amssymb| package",
+author = "Michael Downes and David M. Jones and Frank Mittelbach and Rainer Schöpf",
+collaboration = "American Mathematical Society",
+date = "1995",
+eprinttype = "ctan",
+eprint = "amsfonts",
+}
+
+ at article{slashed,
+title = "The |slashed| package",
+subtitle = "Put a slash through characters",
+author = "David Carlisle",
+date = "1987",
+eprinttype = "ctan",
+eprint = "slashed",
+}
+
+ at article{physics,
+title = "The |physics| package",
+subtitle = "Macros supporting the Mathematics of Physics",
+author = "Sergio C. de la Barrera",
+date = "2012",
+eprinttype = "ctan",
+eprint = "physics",
+}
+
+ at article{units,
+title = "The |units| and |nicefrac| packages",
+subtitle = "Typeset units",
+author = "Axel Reichert",
+date = "1998",
+eprinttype = "ctan",
+eprint = "units",
+}
+
+ at article{subcaption,
+title = "The |subcaption| package",
+subtitle = "Support for sub-captions",
+author = "Axel Sommerfeldt",
+date = "2007",
+eprinttype = "ctan",
+eprint = "subcaption",
+related = "caption-1",
+}
+
+ at article{caption,
+title = "The |caption| package",
+subtitle = "Customising captions in floating environments",
+author = "Axel Sommerfeldt",
+date = "1994",
+eprinttype = "ctan",
+eprint = "caption",
+related = "caption-1",
+}
+
+ at manual{caption-1,
+eprinttype = "gitlab",
+eprintclass = "axelsommerfeldt",
+eprint = "caption",
+}
+
+
+ at article{biblatex,
+title = "The |biblatex| Package",
+subtitle = "Sophisticated Bibliographies in \hologo{LaTeX}",
+author = "Philipp Lehman and Joseph Wright and Audrey Boruvka and Philip Kime",
+date = "2006",
+eprinttype = "ctan",
+eprint = "biblatex",
+related = "biblatex-1",
+}
+
+ at manual{biblatex-1,
+eprinttype = "github",
+eprintclass = "plk",
+eprint = "biblatex",
+}
+
+ at article{hyperref,
+title = "Hypertext marks in \hologo{LaTeX}: a manual for |hyperref|",
+subtitle = "Extensive support for hypertext in \hologo{LaTeX}",
+author = "Sebastian Rahtz and Heiko Oberdiek",
+collaboration = "\hologo{LaTeX3} Project",
+date = "1995",
+eprinttype = "ctan",
+eprint = "hyperref",
+related = "hyperref-1",
+}
+
+ at manual{hyperref-1,
+eprinttype = "github",
+eprintclass = "latex3",
+eprint = "hyperref",
+}
+
+ at article{graphicx,
+title = "Packages in the \enquote{graphics} bundle",
+subtitle = "Enhanced support for graphics",
+author = "David Carlisle and Sebastian Rahtz",
+date = "1994",
+eprinttype = "ctan",
+eprint = "graphicx",
+}
+
+ at article{booktabs,
+title = "The |booktabs| package",
+subtitle = "Publication quality tables in \hologo{LaTeX}",
+author = "Danie Els and Simon Fear",
+date = "1995",
+eprinttype = "ctan",
+eprint = "booktabs",
+}
+
+ at article{multirow,
+title = "The |multirow|, |bigstrut| and |bigdelim| packages",
+subtitle = "Create tabular cells spanning multiple rows",
+author = "Piet van Oostrum and Jerry Leichter",
+date = "1994",
+eprinttype = "ctan",
+eprint = "multirow",
+}
+
+ at article{fixmath,
+title = "The |fixmath| package for \hologo{LaTeX2e}",
+subtitle = "Make maths comply with ISO 31-0:1992 to ISO 31-13:1992",
+author = "Walter Schmidt",
+date = "2000",
+eprinttype = "ctan",
+eprint = "fixmath",
+}
+
+ at article{alphabeta,
+title = "The |alphabeta| package",
+subtitle = "LICR macros and encoding definition files for Greek",
+author = "Günter Milde",
+date = "2013",
+eprinttype = "ctan",
+eprint = "greek-fontenc",
+}
+
+ at article{textalpha,
+title = "The |textalpha| package",
+subtitle = "LICR macros and encoding definition files for Greek",
+author = "Günter Milde",
+date = "2010",
+eprinttype = "ctan",
+eprint = "greek-fontenc",
+}
+
+ at article{arxiv-collector,
+title = "|arxiv-collector|",
+subtitle = "A little Python script to collect \hologo{LaTeX} sources for upload to the arXiv",
+author = "Dougal Sutherland",
+date = "2018",
+eprinttype = "github",
+eprintclass = "dougalsutherland",
+eprint = "arxiv-collector",
+}
+
+ at article{biber,
+title = "\hologo{biber}",
+subtitle = "Backend processor for Bib\hologo{LaTeX}",
+author = "François Charette and Philip Kime",
+date = "2009",
+eprinttype = "github",
+eprintclass = "plk",
+eprint = "biber",
+related = "biber-1",
+}
+
+ at manual{biber-1,
+eprinttype = "sourceforge",
+eprint = "biblatex-biber",
+}
+
+ at article{lmodern,
+title = "Latin Modern Family of Fonts",
+subtitle = "Latin modern fonts in outline formats",
+date = "2003",
+author = "B. Jackowski and J.M. Nowacki",
+url = "http://gust.org.pl/projects/e-foundry/latin-modern",
+eprinttype = "ctan",
+eprint = "lm",
+}
+
+ at article{ifluatex,
+title = "The |ifluatex| package",
+subtitle = "Provides the |\textbackslash ifluatex| switch",
+author = "Heiko Oberdiek",
+collaboration = "\hologo{LaTeX} Team",
+date = "2007",
+eprinttype = "ctan",
+eprint = "ifluatex",
+}
+
+ at article{ifxetex,
+title = "The |iftex| package",
+subtitle = "Am I running under \hologo{XeTeX}?",
+collaboration = "\hologo{LaTeX} Team",
+author = "Will Robertson",
+date = "2006",
+eprinttype = "ctan",
+eprint = "ifxetex",
+related = "ifxetex-1",
+}
+
+ at manual{ifxetex-1,
+eprinttype = "github",
+eprintclass = "latex3",
+eprint = "iftex",
+}
+
+ at article{fontspec,
+title = "The |fontspec| package",
+subtitle = "Advanced font selection in \hologo{XeLaTeX} and \hologo{LuaLaTeX}",
+author = "Will Robertson and Khaled Hosny",
+date = "2004",
+eprinttype = "ctan",
+eprint = "fontspec",
+}
+
+ at article{fontenc,
+title = "The |fontenc| package",
+subtitle = "Standard package for selecting font encodings",
+collaboration = "\hologo{LaTeX} Team",
+author = "Frank Mittelbach and Robin Fairbairns and Werner Lemberg",
+date = "1995",
+eprinttype = "ctan",
+eprint = "fontenc",
+}
+
+ at article{inputenc,
+title = "The |inputenc| package",
+subtitle = "Accept different input encodings",
+collaboration = "\hologo{LaTeX} Team",
+author = "Frank Mittelbach and Alan Jeffrey",
+date = "1989",
+eprinttype = "ctan",
+eprint = "inputenc",
+}
+
+ at article{textcomp,
+title = "The |textcomp| package",
+subtitle = "\hologo{LaTeX} support for the Text Companion fonts",
+collaboration = "\hologo{LaTeX} Team",
+author = "Sebastian Rahtz",
+date = "1995",
+eprinttype = "ctan",
+eprint = "textcomp",
+}
+
+ at article{enumitem,
+title = "Customizing lists with the |enumitem| package",
+subtitle = "Control layout of itemize, enumerate, description",
+author = "Javier Bezos",
+date = "2003",
+url = "https://texnia.com/enumitem.html",
+eprinttype = "ctan",
+eprint = "enumitem",
+related = "enumitem-1",
+}
+
+ at manual{enumitem-1,
+eprinttype = "github",
+eprintclass = "jbezos",
+eprint = "enumitem",
+}
+
+ at article{atbegshi,
+title = "The |atbegshi| package",
+subtitle = "Execute stuff at |shipout| time",
+author = "Heiko Oberdiek",
+date = "2007",
+eprinttype = "ctan",
+eprint = "atbegshi",
+related = "atbegshi-1",
+}
+
+ at manual{atbegshi-1,
+eprinttype = "github",
+eprintclass = "ho-tex",
+eprint = "atbegshi",
+}
+
+ at article{picture,
+title = "The |picture| package",
+subtitle = "Dimens for picture macros",
+author = "Heiko Oberdiek",
+date = "2006",
+eprinttype = "ctan",
+eprint = "picture",
+related = "picture-1",
+}
+
+ at manual{picture-1,
+eprinttype = "github",
+eprintclass = "ho-tex",
+eprint = "picture",
+}
+
+ at article{varwidth,
+title = "The |varwidth| package",
+subtitle = "A variable-width minipage",
+author = "Donald Arseneau",
+date = "2003",
+eprinttype = "ctan",
+eprint = "varwidth",
+}
+
+ at article{csquotes,
+title = "The |csquotes| Package",
+subtitle = "Context sensitive quotation facilities",
+author = "Philipp Lehman and Joseph Wright",
+date = "2003",
+eprinttype = "ctan",
+eprint = "csquotes",
+}
+
+ at article{babel,
+title = "|Babel| Localization and internationalization",
+subtitle = "Multilingual support for Plain \hologo{TeX} or \hologo{LaTeX}",
+author = "Johannes Braams and Javier Bezos and at al.",
+date = "1989",
+eprinttype = "ctan",
+eprint = "babel",
+related = "babel-1",
+}
+
+ at manual{babel-1,
+eprinttype = "github",
+eprintclass = "latex3",
+eprint = "babel",
+}
+
+ at article{polyglossia,
+title = "The |polyglossia| package",
+author = "Arthur Reutenauer and François Charette and Elie Roux and Bastien Roucariès and Jürgen Spitzmüller",
+eprinttype = "ctan",
+eprint = "polyglossia",
+}
+
+ at article{parskip,
+title = "The |parskip| package",
+subtitle = "Layout with zero |\textbackslash parindent|, non-zero |\textbackslash parskip|",
+author = "Robin Fairbairns and Frank Mittelbach and H. Partl",
+date = "1989",
+eprinttype = "ctan",
+eprint = "parskip",
+related = "parskip-1",
+}
+
+ at manual{parskip-1,
+eprinttype = "github",
+eprintclass = "FrankMittelbach",
+eprint = "fmitex",
+}
+
+
+ at article{fntguide,
+title = "\hologo{LaTeX2e}\ font selection",
+subtitle = "Docmentation of \hologo{LaTeX} font commands",
+collaboration = "\hologo{LaTeX} Team",
+date = "1995",
+eprinttype = "ctan",
+eprint = "fntguide",
+}
+
+ at article{euenc,
+title = "The Experimental Unicode `EUx’ Encodings",
+author = "Will Robertson and Elie Roux and Khaled Hosny",
+eprinttype = "ctan",
+eprint = "euenc",
+}
+
+ at article{soul,
+title = "The |soul| package",
+subtitle = "Hyphenation for letterspacing, underlining, and more",
+author = "Melchior Franz",
+date = "1998",
+eprinttype = "ctan",
+eprint = "soul",
+}
+
+ at article{ulem,
+title = "The |ulem| package",
+subtitle = "Package for underlining",
+author = "Donald Arseneau",
+date = "1989",
+eprinttype = "ctan",
+eprint = "ulem",
+}
+
+ at article{glossaries,
+title = "The |glossaries| package",
+subtitle = "Create glossaries and lists of acronyms",
+author = "Nicola Talbot",
+date = "2007",
+eprinttype = "ctan",
+eprint = "glossaries",
+}
+
+ at article{glossaries-extra,
+title = "The |glossaries-extra| package",
+subtitle = "An extension to the |glossaries| package",
+author = "Dickimaw Books, Nicola Talbot",
+date = "2015",
+eprinttype = "ctan",
+eprint = "glossaries-extra",
+}
+
+ at article{xparse,
+title = "The |xparse| package",
+subtitle = "A generic document command parser",
+author = "Frank Mittelbach and Chris Rowley and David Carlisle",
+collaboration = "\hologo{LaTeX3} Project",
+date = "1999",
+eprinttype = "ctan",
+eprint = "xparse",
+}
+
+ at article{pdftexcmds,
+title = "The |pdftexcmds| package",
+subtitle = "\hologo{LuaTeX} support for \hologo{pdfTeX} utility functions",
+author = "Heiko Oberdiek",
+date = "2007",
+eprinttype = "ctan",
+eprint = "pdftexcmds",
+}
+
+ at article{fix-cm,
+title = "The |fix-cm| package",
+subtitle = "Permit Computer Modern fonts at arbitrary sizes",
+author = "Frank Mittelbach and David Carlisle and Chris Rowley and Walter Schmidt",
+date = "1993",
+eprinttype = "ctan",
+eprint = "fix-cm",
+}
+
+ at article{revtex,
+title = "The REV\hologo{TeX} class",
+subtitle = "Styles for various Physics Journals",
+author = "Mark Doyle and Arthur Ogawa",
+collaboration = "American Physical Society",
+date = "1999",
+url = "https://journals.aps.org/revtex",
+eprinttype = "ctan",
+eprint = "revtex",
+}
+
+ at article{encguide,
+title = "\hologo{LaTeX} font encodings",
+subtitle = "Documentation of \hologo{LaTeX} font encodings",
+author = "Frank Mittelbach and Robin Fairbairns and Werner Lemberg",
+collaboration = "\hologo{LaTeX3} Project Team",
+date = "1995",
+eprinttype = "ctan",
+eprint = "encguide",
+}
+
+ at article{sfmath,
+title = "The |sfmath| package",
+subtitle = "Sans-serif mathematics",
+author = "Olaf Dietrich",
+date = "2005",
+url = "https://dtrx.de/od/tex/sfmath",
+eprinttype = "ctan",
+eprint = "sfmath",
+}
+
+ at article{relsize,
+title = "The |relsize| package",
+subtitle = "Set the font size relative to the current font size",
+author = "Donald Arseneau and Matt Swift",
+date = "2011",
+eprinttype = "ctan",
+eprint = "relsize",
+}
+
+ at article{everyhook,
+title = "The |everyhook| package",
+subtitle = "Hooks for standard \hologo{TeX} token lists",
+author = "Stephen Checkoway",
+date = "2010",
+eprinttype = "ctan",
+eprint = "everyhook",
+}
+
+
+ at article{sansmathfonts,
+title = "The |sansmathfonts| package",
+subtitle = "Correct placement of accents in sans-serif maths",
+author = "Ariel Barton",
+date = "2013",
+eprinttype = "ctan",
+eprint = "sansmathfonts",
+}
+
+ at article{xspace,
+title = "The |xspace| package",
+subtitle = "Define commands that appear not to eat spaces",
+author = "David Carlisle and Morten Høgholm",
+collaboration = "\hologo{LaTeX} Team",
+date = "1993",
+eprinttype = "ctan",
+eprint = "xspace",
+}
+
+ at article{ragged2e,
+title = "The |ragged2e|-package",
+subtitle = "Alternative versions of \enquote{ragged}-type commands",
+author = "Martin Schröder",
+date = "1996",
+eprinttype = "ctan",
+eprint = "ragged2e",
+related = "ragged2e-1",
+}
+
+ at manual{ragged2e-1,
+eprinttype = "gitlab",
+eprintclass = "hagenbuch",
+eprint = "ragged2e",
+}
+
+ at article{url,
+title = "The |url| package",
+subtitle = "Verbatim with URL-sensitive line breaks",
+author = "Donald Arseneau",
+date = "1996",
+eprinttype = "ctan",
+eprint = "url",
+}
+
+ at article{jhep,
+title = "The |JHEP| package",
+collaboration = "SISSA Medialab",
+date = "1997",
+url = "https://jhep.sissa.it/jhep/help/JHEP_TeXclass.jsp",
+}
+
+ at article{jcap,
+title = "The |JCAP| package",
+collaboration = "SISSA Medialab",
+date = "2002",
+url = "https://jcap.sissa.it/jcap/help/JCAP_TeXclass.jsp",
+}
+
+ at article{bbm-macros,
+title = "A package for using the |bbm| fonts in math environment",
+author = "Torsten Hilbrich",
+date = "1994",
+eprinttype = "ctan",
+eprint = "bbm-macros",
+related = "bbm"
+}
+
+ at article{bbm,
+title = "|bbm|",
+subtitle = "\enquote{Blackboard-style} cm fonts",
+author = "Gilles Robert",
+date = "1993",
+eprinttype = "ctan",
+eprint = "bbm",
+}
+
+ at article{arxiv,
+title = "arXiv",
+subtitle = "free distribution service and an open archive for scholarly articles",
+url = "https://arxiv.org",
+author = "Paul Ginsparg",
+collaboration = "arXiv Team",
+year = "1991",
+organization = "Cornell University",
+}
+
+ at article{dsfont,
+title = "The |doublestroke| font",
+subtitle = "Typeset mathematical double stroke symbols",
+author = "Olaf Kummer",
+date = "1995",
+eprinttype = "ctan",
+eprint = "doublestroke",
+}
+
+ at article{mleftright,
+title = "The |mleftright| package",
+subtitle = "Variants of delimiters that act as maths open/close",
+author = "Heiko Oberdiek",
+date = "2010",
+eprinttype = "ctan",
+eprint = "mleftright",
+}
+
+ at article{urwchancal,
+title = "A virtual font for URW Chancery Math",
+subtitle = "Use URW's clone of Zapf Chancery as a maths alphabet",
+author = "Michael Sharpe",
+date = "2011",
+eprinttype = "ctan",
+eprint = "urwchancal",
+}
+
+ at article{footnotebackref,
+title = "The |footnotebackref| package",
+subtitle = "Back-references from footnotes",
+author = "Holger Lange",
+date = "2012",
+eprinttype = "ctan",
+eprint = "footnotebackref",
+}
+
+ at article{cancel,
+title = "The |cancel| package",
+subtitle = "Place lines through maths formulae",
+author = "Donald Arseneau",
+date = "2013",
+eprinttype = "ctan",
+eprint = "cancel",
+}
+
+ at article{beamer,
+title = "The |beamer| class",
+subtitle = "A \hologo{LaTeX} class for producing presentations and slides",
+author = "Till Tantau and Joseph Wright and Vedran Miletić",
+date = "2003",
+eprinttype = "ctan",
+eprint = "beamer",
+related = "beamer-1",
+}
+
+ at manual{beamer-1,
+eprinttype = "github",
+eprintclass = "josephwright",
+eprint = "beamer",
+}
+
+ at article{exscale,
+title = "The |exscale| package",
+subtitle = "Implements scaling of the \enquote{cmex} fonts",
+author = "Frank Mittelbach and Rainer Schöpf",
+date = "1993",
+eprinttype = "ctan",
+eprint = "exscale",
+}
+
+ at article{mathrsfs,
+title = "The |mathrsfs| package",
+subtitle = "Support for using RSFS fonts in maths",
+author = "Jörg Knappen",
+date = "1995",
+eprinttype = "ctan",
+eprint = "mathrsfs",
+}
+
+ at article{esint,
+title = "The |esint| package",
+subtitle = "Extended set of integrals for Computer Modern",
+author = "Eddie Saudrais",
+date = "2005",
+eprinttype = "ctan",
+eprint = "esint",
+}
+
+ at article{cmbright,
+title = "The |cmbright| package",
+subtitle = "Using the CM Bright typeface with \hologo{LaTeX}",
+author = "Walter A. Schmidt",
+date = "1996",
+eprinttype = "ctan",
+eprint = "cmbright",
+}
+
+ at article{titling,
+title = "The |titling| package",
+subtitle = "Control over the typesetting of the |\textbackslash maketitle| command",
+author = "Peter R. Wilson",
+date = "2000",
+eprinttype = "ctan",
+eprint = "titling",
+}
+
+ at article{MnSymbol,
+title = "The |MnSymbol| package",
+subtitle = "Mathematical symbol font for Adobe MinionPro",
+author = "Achim Blumensath",
+date = "2005",
+eprinttype = "ctan",
+eprint = "MnSymbol",
+}
+
+ at article{environ,
+title = "The |environ| package",
+subtitle = "A new interface for environments in \hologo{LaTeX}",
+author = "Will Robertson",
+date = "2007",
+eprinttype = "ctan",
+eprint = "environ",
+}
+
+ at article{abstract,
+title = "The |abstract| package",
+subtitle = "Control the typesetting of the abstract environment",
+author = "Peter R. Wilson",
+date = "2000",
+eprinttype = "ctan",
+eprint = "abstract",
+}
+
+ at article{cfr-lm,
+title = "The |cfr-lm| package",
+subtitle = "Enhanced support for the Latin Modern fonts",
+author = "Clea F. Rees",
+date = "2008",
+eprinttype = "ctan",
+eprint = "cfr-lm",
+}
+
+ at article{etoolbox,
+title = "The |etoolbox| package",
+subtitle = "e-\hologo{TeX} tools for \hologo{LaTeX}",
+author = "Philipp Lehman and Joseph Wright",
+date = "2007",
+eprinttype = "ctan",
+eprint = "etoolbox",
+}
+
+ at article{substitutefont,
+title = "The |substitutefont| package",
+subtitle = "Easy font substitution",
+author = "Günter Milde",
+date = "2010",
+eprinttype = "ctan",
+eprint = "substitutefont",
+}
+
+ at article{svjour,
+title = "The |svjour| package",
+subtitle = "Macros for Springer journals",
+collaboration = "Springer Verlag",
+date = "1997",
+eprinttype = "ctan",
+eprint = "springer",
+}
+
+ at article{cm,
+title = "Computer Modern fonts",
+author = "Donald E. Knuth",
+date = "1986",
+eprinttype = "ctan",
+eprint = "cm",
+}
+
+ at article{subdepth,
+title = "The |subdepth| package",
+subtitle = "Unify maths subscript height",
+author = "Will Robertson",
+date = "2007",
+eprinttype = "ctan",
+eprint = "subdepth",
+}
+
+ at article{xpatch,
+title = "The |xpatch| package",
+subtitle = "Extending etoolbox patching commands",
+author = "Enrico Gregorio",
+date = "2012",
+eprinttype = "ctan",
+eprint = "xpatch",
+}
+
+ at article{hfoldsty,
+title = "The |hfoldsty| package",
+subtitle = "Old style numerals with EC fonts",
+author = "Harald Harders",
+date = "2004",
+eprinttype = "ctan",
+eprint = "hfoldsty",
+}
+
+ at article{slantsc,
+title = "The |slantsc| package",
+subtitle = "Access different-shaped small-caps fonts",
+author = "Harald Harders",
+date = "2003",
+eprinttype = "ctan",
+eprint = "slantsc",
+}
+
+ at article{nfssext-cfr,
+title = "The |nfssext-cfr| package",
+subtitle = "Extensions to the \hologo{LaTeX} NFSS",
+author = "Clea F. Rees and Philipp Lehman",
+date = "2003",
+eprinttype = "ctan",
+eprint = "nfssext-cfr",
+}
+
+ at article{xstring,
+title = "The |xstring| package",
+subtitle = "String manipulation for \hologo{LaTeX}",
+author = "Christian Tellechea",
+date = "2008",
+eprinttype = "ctan",
+eprint = "xstring",
+}
+
+ at article{gregorio:2020,
+title = "\hologo{TeX}, \hologo{LaTeX} and math",
+author = "Enrico Gregorio",
+date = "2020",
+url = "https://latex-project.org/publications/2020-egreg-TUB-tb127gregorio-math.pdf",
+}
+
+ at article{soulutf8,
+title = "The |soulutf8| package",
+subtitle = "Permit use of UTF-8 characters in |soul|",
+author = "Heiko Oberdiek",
+date = "2007",
+eprinttype = "ctan",
+eprint = "soulutf8",
+}
+
Property changes on: trunk/Master/texmf-dist/doc/latex/hep-math/bibliography.bib
___________________________________________________________________
Added: svn:eol-style
## -0,0 +1 ##
+native
\ No newline at end of property
Added: trunk/Master/texmf-dist/doc/latex/hep-math/hep-math-documentation.pdf
===================================================================
(Binary files differ)
Index: trunk/Master/texmf-dist/doc/latex/hep-math/hep-math-documentation.pdf
===================================================================
--- trunk/Master/texmf-dist/doc/latex/hep-math/hep-math-documentation.pdf 2021-11-27 21:22:55 UTC (rev 61169)
+++ trunk/Master/texmf-dist/doc/latex/hep-math/hep-math-documentation.pdf 2021-11-27 21:23:37 UTC (rev 61170)
Property changes on: trunk/Master/texmf-dist/doc/latex/hep-math/hep-math-documentation.pdf
___________________________________________________________________
Added: svn:mime-type
## -0,0 +1 ##
+application/pdf
\ No newline at end of property
Added: trunk/Master/texmf-dist/doc/latex/hep-math/hep-math-documentation.tex
===================================================================
--- trunk/Master/texmf-dist/doc/latex/hep-math/hep-math-documentation.tex (rev 0)
+++ trunk/Master/texmf-dist/doc/latex/hep-math/hep-math-documentation.tex 2021-11-27 21:23:37 UTC (rev 61170)
@@ -0,0 +1,358 @@
+%%
+%% This is file `hep-math-documentation.tex',
+%% generated with the docstrip utility.
+%%
+%% The original source files were:
+%%
+%% hep-math-implementation.dtx (with options: `documentation')
+%% This is a generated file.
+%% Copyright (C) 2019-2020 by Jan Hajer
+%% This file may be distributed and/or modified under the
+%% conditions of the LaTeX Project Public License, either
+%% version 1.3c of this license or (at your option) any later
+%% version. The latest version of this license is in:
+%% http://www.latex-project.org/lppl.txt
+%% and version 1.3c or later is part of all distributions of
+%% LaTeX version 2005/12/01 or later.
+
+\ProvidesFile{hep-math-documentation.tex}[2021/09/01 v1.0 hep-math documentation]
+
+\RequirePackage[l2tabu, orthodox]{nag}
+
+\documentclass{ltxdoc}
+\AtBeginDocument{\DeleteShortVerb{\|}}
+\AtBeginDocument{\MakeShortVerb{\"}}
+
+\EnableCrossrefs
+\CodelineIndex
+\RecordChanges
+
+\usepackage[parskip]{hep-paper}
+
+\newenvironment{columns}[1][.5]{%
+ \par\vspace{-\bigskipamount}%
+ \begin{minipage}[t]{\linewidth}%
+ \begin{minipage}[t]{#1\linewidth}%
+ \def\column{%
+ \end{minipage}%
+ \begin{minipage}[t]{\linewidth-#1\linewidth}%
+ }%
+}{\end{minipage}\end{minipage}\par}
+
+\bibliography{bibliography}
+
+\usepackage{hologo}
+
+\MacroIndent=1.5em
+\setlength{\fboxsep}{1pt}
+\AtBeginEnvironment{macrocode}{\renewcommand{\ttdefault}{clmt}}
+
+\GetFileInfo{hep-math.sty}
+
+\title{The \software{hep-math} package\thanks{This document corresponds to \software{hep-math}~\fileversion.}}
+\subtitle{Extended math macros}
+\author{Jan Hajer \email{jan.hajer at unibas.ch}}
+\date{\filedate}
+
+\begin{document}
+
+\newgeometry{vscale=.8, vmarginratio=3:4, includeheadfoot, left=11em, marginparwidth=4.6cm, marginparsep=3mm, right=7em}
+
+\maketitle
+
+\begin{abstract}
+The \software{hep-math} package provides some additional features beyond the \software{mathtools} and \software{amsmath} packages.
+\end{abstract}
+
+To use the package place "\usepackage{hep-math}" in the preamble.
+
+The \software{mathtools} \cite{mathtools} package is loaded, which in turn loads the \hologo{AmSLaTeX} \software{amsmath} \cite{amsmath} package.
+Horizontal spacing in inline equations and page breaks in block equations are marginally adjusted.
+\DescribeMacro{\left}
+\DescribeMacro{\right}
+Spacing around "\left" and "\right" is fixed with the \software{mleftright} package \cite{mleftright}.
+
+\section{Macros}
+
+\DescribeMacro{\mathdef}
+The "\mathdef"\marg{name}\oarg{arguments}\marg{code} macro \prefix{re}{defines} macros only within math mode without changing the text mode definition.
+
+\DescribeMacro{\i}
+\DescribeMacro{\d}
+The imaginary unit "\i" and the differential "\d" are defined using this functionality.
+
+\DescribeMacro{\overline}
+The "\overline" macro is adjusted to \overline{work also outside} of math mode using the \software{soulutf8} \cite{soulutf8} package.
+
+\DescribeMacro{\oset}
+\DescribeMacro{\overleft}
+\DescribeMacro{\overright}
+\DescribeMacro{\overleftright}
+A better looking over left right arrow is defined \ie $\overleftright{\partial}$ using a new "\oset"\marg{over}\marg{math} functionality.
+
+\DescribeMacro{\diag}
+\DescribeMacro{\sgn}
+Diagonal matrix "\diag", signum "\sgn", trace "\tr", "\Tr", and "\rank" operators are defined.
+
+\DescribeMacro{\Re}
+\DescribeMacro{\Im}
+The real and imaginary projectors are redefined to look like ordinary operators.
+
+\DescribeMacro{\sin}
+\DescribeMacro{\cos}
+\DescribeMacro{\tan}
+"\cos" and "\tan" are adjusted to have the same height as "\sin".
+
+\DescribeMacro{\accsc}
+"\arccsc" and other inverse trigonometric functions are defined.
+
+\subsection{Fractions and units}
+
+\DescribeMacro{\unit}
+\DescribeMacro{\inv}
+The correct spacing for units is provided by the macro "\unit"\oarg{value}\marg{unit} from the \software{units} package \cite{units} which can also be used in text mode.
+The macro "\inv"\oarg{power}\marg{text} allows to avoid math mode also for inverse units such as \unit[5]{\inv{fb}} typeset via "\unit[5]{\inv{fb}}".
+
+\DescribeMacro{\nicefrac}
+\DescribeMacro{\flatfrac}
+\DescribeMacro{\textfrac}
+The "\frac"\marg{number}\marg{number} macro is accompanied by "\nicefrac"\linebreak[1]\marg{number}\linebreak[1]\marg{number}, "\textfrac"\marg{number}\marg{number}, and "\flatfrac"\marg{number}\marg{number} leading to $\frac12$, $\nicefrac12$, \textfrac12, and $\flatfrac12$.
+The "\textfrac" macro is mostly intended if a font with oldstyle numerals is used.
+
+Some macros of the \software{physics} package \cite{physics} are reimplemented with a more conventional typesetting in mind.
+Finer details about mathematical typesetting can be found in \cite{gregorio:2020}.
+
+\subsection{Differentials and derivatives}
+
+\DescribeMacro{\differential}
+\DescribeMacro{\newderivative}
+\DescribeMacro{\newpartialderivative}
+The three macros "\differential"\marg{symbol}, "\newderivative""{\name}"\marg{symbol}, and "\newpartialderivative""{\name}"\marg{symbol} allow to define a differential with correct spacing, a derivative using this differential, and if necessary a partial derivative that can handle three dimensional derivatives.
+
+\DescribeMacro{\d}
+\DescribeMacro{\dv}
+These macros are used for the usual differential and derivative, producing $\d x$ via "\d x" and
+\begin{center}
+\begin{tabular}{*4c}
+"\dv[f]x" & "\dv*[f]x^n" & "\dv[f]x*^n" & "\dv*[f]x*^n" \\
+$\dv[f]x$ & $\dv*[f]x^n$ & $\dv[f]x*^n$ & $\dv*[f]x*^n$ \\
+"\dv xf" & "\dv*xf" & "\dv x*f" & "\dv*x*f" \\
+$\dv xf$ & $\dv*xf$ & $\dv x*f$ & $\dv*x*f$
+\end{tabular}
+\end{center}
+via "\dv*"\oarg{f}\marg{x}"*""^"\marg{n}.
+Upright differential can be produced via "\renewcommand" "{\diffsymbol}""{\mathrm d}".
+
+\DescribeMacro{\pd}
+\DescribeMacro{\pdv}
+Similarly a partial differential and derivative are defined that can be used according to "\pdv*"\oarg{f}\marg{x}"*""^"\marg{a}\oarg{y}"^"\marg{b}\oarg{z}"^"\marg{c}.
+\begin{center}
+\begin{tabular}{*4c}
+"\pdv[f]x" & "\pdv[f]x[y]" & "\pdv[f]x^3" & "\pdv[f]x^2[y]" \\
+$\pdv[f]x$ & $\pdv[f]x[y]$ & $\pdv[f]x^3$ & $\pdv[f]x^2[y]$ \\
+"\pdv[f]x^2[y]^3" & "\pdv[f]x[y]^3" & "\pdv x[y]f"\\
+$\pdv[f]x^2[y]^3$ & $\pdv[f]x[y]^3$ & $\pdv x[y]f$
+\end{tabular}
+\end{center}
+
+\DescribeMacro{\var}
+\DescribeMacro{\fdv}
+Similarly a functional variation and functional derivative are defined.
+
+\DescribeMacro{\cancel}
+\DescribeMacro{\slashed}
+The "\cancel"\marg{characters} macro from the \software{cancel} package \cite{cancel} and the "\slashed" \marg{character} macro from the \software{slashed} package \cite{slashed} allow to $\cancel{\text{cancel}}$ math and use the Dirac slash notation \ie $\slashed \pd$, respectively.
+
+\subsection{Paired delimiters}
+
+\DescribeMacro{\abs}
+\DescribeMacro{\norm}
+\begin{center}
+\begin{tabular}{*8r}
+"\abs x" & "\norm x" & "\norm[2]x" & "\norm*[2]x" \\
+$\abs x$ & $\norm x$ & $\norm[2]x$ & $\norm*[2]x$
+\end{tabular}
+\end{center}
+
+\DescribeMacro{\eval}
+\DescribeMacro{\order}
+\begin{center}
+\begin{tabular}{*8r}
+"\order x" & "\eval x_0^\infty" & "\eval* x_0^\infty" \\
+$\order x$ & $\eval x_0^\infty$ & $\eval* x_0^\infty$
+\end{tabular}
+\end{center}
+
+\DescribeMacro{\newpair}
+\DescribeMacro{\comm}
+\DescribeMacro{\acomm}
+The "\newpair"\marg{name}\marg{left delim} \marg{right delim}"_"\marg{subscript}"^"\marg{superscript} macro is defined and used for the definition of \prefix{anti}{commutators} and Poisson brackets.
+\begin{center}
+\begin{tabular}{*8r}
+"\pb xy" & "\comm xy" & "\acomm xy" \\
+$\pb xy$ & $\comm xy$ & $\acomm xy$
+\end{tabular}
+\end{center}
+They can easily be redefined using \eg "\newpair\comm\lbrack\rbrack_-".
+
+\DescribeMacro{\bra}
+\DescribeMacro{\ket}
+\DescribeMacro{\braket}
+\DescribeMacro{\ketbra}
+\DescribeMacro{\mel}
+\DescribeMacro{\ev}
+\DescribeMacro{\vev}
+Macros for the bra-ket notation are introduced.
+\begin{center}
+\begin{tabular}{*4c}
+"\bra x" & "\ket x" & "\braket xy" & "\ketbra xy" \\
+$\bra x$ & $\ket x$ & $\braket xy$ & $\ketbra xy$ \\
+"\mel xyz" & "\ev x" & "\ev[\Omega] x" & "\vev x" \\
+$\mel xyz$ & $\ev x$ & $\ev[\Omega] x$ & $\vev x$
+\end{tabular}
+\end{center}
+
+\DescribeMacro{\column}
+\DescribeMacro{\row}
+\begin{center}
+\begin{tabular}{*4c}
+"\column{x,y,z}" & "\row{x,y,z}" \\
+$\column{x,y,z}$ & $\row{x,y,z}$ \\
+\end{tabular}
+\end{center}
+
+\section{Environments}
+
+\DescribeMacro{eqnarray}
+The "eqnarray" environment is depreciated, the "split", "multline", "align", "multlined", "aligned", "alignedat", and "cases" environments of the \software{amsmath} and \software{mathtools} packages should be used instead.
+
+\DescribeMacro{equation}
+Use the "equation" environment for short equations.
+\begin{columns}
+\begin{verbatim}
+\begin{equation}
+ left = right \ .
+\end{equation}
+\end{verbatim}
+\column
+\begin{equation}
+\framebox[2em]{left\strut} = \framebox[7em]{right\strut} \ .
+\end{equation}
+\end{columns}
+
+\DescribeMacro{multline}
+Use the "multline" environment for longer equations.
+\begin{columns}
+\begin{verbatim}
+\begin{multline}
+ left = right 1 \\
+ + right 2 \ .
+\end{multline}
+\end{verbatim}
+\column
+\begin{multline}
+\framebox[2em]{left\strut} = \framebox[7em]{right 1\strut} \\
+\framebox[7em]{+ right 2\strut} \ .
+\end{multline}
+\end{columns}
+
+\DescribeMacro{split}
+Use the "split" sub environment for equations in which multiple equal signs should be aligned.
+\begin{columns}
+\begin{verbatim}
+\begin{equation} \begin{split}
+ left &= right 1 \\
+ &= right 2 \ .
+\end{split} \end{equation}
+\end{verbatim}
+\column
+\begin{equation}
+\begin{split}
+\framebox[2em]{left\strut} &= \framebox[7em]{right 1\strut} \\
+&= \framebox[7em]{right 2\strut} \ .
+\end{split}
+\end{equation}
+\end{columns}
+
+\DescribeMacro{align}
+Use the "align" environment for the vertical alignment and horizontal distribution of multiple equations.
+\begin{columns}
+\begin{verbatim}
+\begin{subequations} \begin{align}
+ left &= right \ , &
+ left &= right \ , \\
+ left &= right \ , &
+ left &= right \ .
+\end{align} \end{subequations}
+\end{verbatim}
+\column
+\begin{subequations}
+\begin{align}
+\framebox[2em]{left\strut} &= \framebox[3em]{right\strut} \ , &
+\framebox[2em]{left\strut} &= \framebox[3em]{right\strut} \ , \\
+\framebox[2em]{left\strut} &= \framebox[3em]{right\strut} \ , &
+\framebox[2em]{left\strut} &= \framebox[3em]{right\strut} \ .
+\end{align}
+\end{subequations}
+\end{columns}
+
+\DescribeMacro{aligned}
+Use the "aligned" environment within a "equation" environment if the aligned equations should be labeled with a single equation number.
+
+\DescribeMacro{multlined}
+Use the "multlined" environment if either "split" or "align" contain very long lines.
+\begin{columns}
+\begin{verbatim}
+\begin{equation} \begin{split}
+ left &= right 1 \\ &=
+ \begin{multlined}[t]
+ right 2 \\ + right 3 \ .
+ \end{multlined}
+\end{split} \end{equation}
+\end{verbatim}
+\column
+\begin{equation}
+\begin{split}
+\framebox[2em]{left\strut} &= \framebox[7em]{right 1\strut} \\ &=
+ \begin{multlined}[t]
+ \framebox[7em]{right 2\strut} \\
+ \framebox[7em]{+ right 3\strut} \ .
+\end{multlined}
+\end{split}
+\end{equation}
+\end{columns}
+
+\DescribeMacro{alignat}
+Use the "alignat" environment together with the "\mathllap" macro for the alignment of multiple equations with vastly different lengths.
+\begin{columns}
+\begin{verbatim}
+\begin{subequations}
+\begin{alignat}{2}
+ left &= long right && \ , \\
+ le. 2 &= ri. 2 \ , &
+ \mathllap{le. 3 = ri. 3} & \ .
+\end{alignat}
+\end{subequations}
+\end{verbatim}
+\column
+\begin{subequations}
+\begin{alignat}{2}
+\framebox[2em]{left\strut} &=
+\framebox[11em]{long right\strut} && \ , \\
+\framebox[2em]{le.\ 2\strut}
+&= \framebox[2.5em]{ri.\ 2\strut} \ , &
+\mathllap{\framebox[2em]{le.\ 3\strut}
+= \framebox[2.5em]{ri.\ 3\strut}} & \ .
+\end{alignat}
+\end{subequations}
+\end{columns}
+
+As a rule of thumb if you have to use "\notag", "\nonumber", or perform manual spacing via "\quad" you are probably using the wrong environment.
+
+\printbibliography
+
+\end{document}
+
+\endinput
+%%
+%% End of file `hep-math-documentation.tex'.
Property changes on: trunk/Master/texmf-dist/doc/latex/hep-math/hep-math-documentation.tex
___________________________________________________________________
Added: svn:eol-style
## -0,0 +1 ##
+native
\ No newline at end of property
Added: trunk/Master/texmf-dist/doc/latex/hep-math/hep-math-implementation.pdf
===================================================================
(Binary files differ)
Index: trunk/Master/texmf-dist/doc/latex/hep-math/hep-math-implementation.pdf
===================================================================
--- trunk/Master/texmf-dist/doc/latex/hep-math/hep-math-implementation.pdf 2021-11-27 21:22:55 UTC (rev 61169)
+++ trunk/Master/texmf-dist/doc/latex/hep-math/hep-math-implementation.pdf 2021-11-27 21:23:37 UTC (rev 61170)
Property changes on: trunk/Master/texmf-dist/doc/latex/hep-math/hep-math-implementation.pdf
___________________________________________________________________
Added: svn:mime-type
## -0,0 +1 ##
+application/pdf
\ No newline at end of property
Added: trunk/Master/texmf-dist/doc/latex/hep-math/hep-math-test.tex
===================================================================
--- trunk/Master/texmf-dist/doc/latex/hep-math/hep-math-test.tex (rev 0)
+++ trunk/Master/texmf-dist/doc/latex/hep-math/hep-math-test.tex 2021-11-27 21:23:37 UTC (rev 61170)
@@ -0,0 +1,39 @@
+%%
+%% This is file `hep-math-test.tex',
+%% generated with the docstrip utility.
+%%
+%% The original source files were:
+%%
+%% hep-math-implementation.dtx (with options: `test')
+%% This is a generated file.
+%% Copyright (C) 2019-2020 by Jan Hajer
+%% This file may be distributed and/or modified under the
+%% conditions of the LaTeX Project Public License, either
+%% version 1.3c of this license or (at your option) any later
+%% version. The latest version of this license is in:
+%% http://www.latex-project.org/lppl.txt
+%% and version 1.3c or later is part of all distributions of
+%% LaTeX version 2005/12/01 or later.
+
+
+\documentclass{article}
+
+\usepackage{hep-math}
+
+\begin{document}
+
+\begin{gather}
+ \bra{x}\ket{y}
+ \braket*{x}{y}\\
+ \dv[f]{x}^3
+ \pdv[f]{x}[y]^2[z]^3
+ \fdv[f]{x}^3[y]\\
+ \set{x \suchthat x \in X}
+\end{gather}
+
+\end{document}
+
+
+\endinput
+%%
+%% End of file `hep-math-test.tex'.
Property changes on: trunk/Master/texmf-dist/doc/latex/hep-math/hep-math-test.tex
___________________________________________________________________
Added: svn:eol-style
## -0,0 +1 ##
+native
\ No newline at end of property
Added: trunk/Master/texmf-dist/doc/latex/hep-math/license.md
===================================================================
--- trunk/Master/texmf-dist/doc/latex/hep-math/license.md (rev 0)
+++ trunk/Master/texmf-dist/doc/latex/hep-math/license.md 2021-11-27 21:23:37 UTC (rev 61170)
@@ -0,0 +1,416 @@
+The LaTeX Project Public License
+=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
+
+LPPL Version 1.3c 2008-05-04
+
+Copyright 1999 2002-2008 LaTeX3 Project
+ Everyone is allowed to distribute verbatim copies of this
+ license document, but modification of it is not allowed.
+
+
+PREAMBLE
+========
+
+The LaTeX Project Public License (LPPL) is the primary license under
+which the LaTeX kernel and the base LaTeX packages are distributed.
+
+You may use this license for any work of which you hold the copyright
+and which you wish to distribute. This license may be particularly
+suitable if your work is TeX-related (such as a LaTeX package), but
+it is written in such a way that you can use it even if your work is
+unrelated to TeX.
+
+The section `WHETHER AND HOW TO DISTRIBUTE WORKS UNDER THIS LICENSE',
+below, gives instructions, examples, and recommendations for authors
+who are considering distributing their works under this license.
+
+This license gives conditions under which a work may be distributed
+and modified, as well as conditions under which modified versions of
+that work may be distributed.
+
+We, the LaTeX3 Project, believe that the conditions below give you
+the freedom to make and distribute modified versions of your work
+that conform with whatever technical specifications you wish while
+maintaining the availability, integrity, and reliability of
+that work. If you do not see how to achieve your goal while
+meeting these conditions, then read the document `cfgguide.tex'
+and `modguide.tex' in the base LaTeX distribution for suggestions.
+
+
+DEFINITIONS
+===========
+
+In this license document the following terms are used:
+
+ `Work'
+ Any work being distributed under this License.
+
+ `Derived Work'
+ Any work that under any applicable law is derived from the Work.
+
+ `Modification'
+ Any procedure that produces a Derived Work under any applicable
+ law -- for example, the production of a file containing an
+ original file associated with the Work or a significant portion of
+ such a file, either verbatim or with modifications and/or
+ translated into another language.
+
+ `Modify'
+ To apply any procedure that produces a Derived Work under any
+ applicable law.
+
+ `Distribution'
+ Making copies of the Work available from one person to another, in
+ whole or in part. Distribution includes (but is not limited to)
+ making any electronic components of the Work accessible by
+ file transfer protocols such as FTP or HTTP or by shared file
+ systems such as Sun's Network File System (NFS).
+
+ `Compiled Work'
+ A version of the Work that has been processed into a form where it
+ is directly usable on a computer system. This processing may
+ include using installation facilities provided by the Work,
+ transformations of the Work, copying of components of the Work, or
+ other activities. Note that modification of any installation
+ facilities provided by the Work constitutes modification of the Work.
+
+ `Current Maintainer'
+ A person or persons nominated as such within the Work. If there is
+ no such explicit nomination then it is the `Copyright Holder' under
+ any applicable law.
+
+ `Base Interpreter'
+ A program or process that is normally needed for running or
+ interpreting a part or the whole of the Work.
+
+ A Base Interpreter may depend on external components but these
+ are not considered part of the Base Interpreter provided that each
+ external component clearly identifies itself whenever it is used
+ interactively. Unless explicitly specified when applying the
+ license to the Work, the only applicable Base Interpreter is a
+ `LaTeX-Format' or in the case of files belonging to the
+ `LaTeX-format' a program implementing the `TeX language'.
+
+
+
+CONDITIONS ON DISTRIBUTION AND MODIFICATION
+===========================================
+
+1. Activities other than distribution and/or modification of the Work
+are not covered by this license; they are outside its scope. In
+particular, the act of running the Work is not restricted and no
+requirements are made concerning any offers of support for the Work.
+
+2. You may distribute a complete, unmodified copy of the Work as you
+received it. Distribution of only part of the Work is considered
+modification of the Work, and no right to distribute such a Derived
+Work may be assumed under the terms of this clause.
+
+3. You may distribute a Compiled Work that has been generated from a
+complete, unmodified copy of the Work as distributed under Clause 2
+above, as long as that Compiled Work is distributed in such a way that
+the recipients may install the Compiled Work on their system exactly
+as it would have been installed if they generated a Compiled Work
+directly from the Work.
+
+4. If you are the Current Maintainer of the Work, you may, without
+restriction, modify the Work, thus creating a Derived Work. You may
+also distribute the Derived Work without restriction, including
+Compiled Works generated from the Derived Work. Derived Works
+distributed in this manner by the Current Maintainer are considered to
+be updated versions of the Work.
+
+5. If you are not the Current Maintainer of the Work, you may modify
+your copy of the Work, thus creating a Derived Work based on the Work,
+and compile this Derived Work, thus creating a Compiled Work based on
+the Derived Work.
+
+6. If you are not the Current Maintainer of the Work, you may
+distribute a Derived Work provided the following conditions are met
+for every component of the Work unless that component clearly states
+in the copyright notice that it is exempt from that condition. Only
+the Current Maintainer is allowed to add such statements of exemption
+to a component of the Work.
+
+ a. If a component of this Derived Work can be a direct replacement
+ for a component of the Work when that component is used with the
+ Base Interpreter, then, wherever this component of the Work
+ identifies itself to the user when used interactively with that
+ Base Interpreter, the replacement component of this Derived Work
+ clearly and unambiguously identifies itself as a modified version
+ of this component to the user when used interactively with that
+ Base Interpreter.
+
+ b. Every component of the Derived Work contains prominent notices
+ detailing the nature of the changes to that component, or a
+ prominent reference to another file that is distributed as part
+ of the Derived Work and that contains a complete and accurate log
+ of the changes.
+
+ c. No information in the Derived Work implies that any persons,
+ including (but not limited to) the authors of the original version
+ of the Work, provide any support, including (but not limited to)
+ the reporting and handling of errors, to recipients of the
+ Derived Work unless those persons have stated explicitly that
+ they do provide such support for the Derived Work.
+
+ d. You distribute at least one of the following with the Derived Work:
+
+ 1. A complete, unmodified copy of the Work;
+ if your distribution of a modified component is made by
+ offering access to copy the modified component from a
+ designated place, then offering equivalent access to copy
+ the Work from the same or some similar place meets this
+ condition, even though third parties are not compelled to
+ copy the Work along with the modified component;
+
+ 2. Information that is sufficient to obtain a complete,
+ unmodified copy of the Work.
+
+7. If you are not the Current Maintainer of the Work, you may
+distribute a Compiled Work generated from a Derived Work, as long as
+the Derived Work is distributed to all recipients of the Compiled
+Work, and as long as the conditions of Clause 6, above, are met with
+regard to the Derived Work.
+
+8. The conditions above are not intended to prohibit, and hence do not
+apply to, the modification, by any method, of any component so that it
+becomes identical to an updated version of that component of the Work as
+it is distributed by the Current Maintainer under Clause 4, above.
+
+9. Distribution of the Work or any Derived Work in an alternative
+format, where the Work or that Derived Work (in whole or in part) is
+then produced by applying some process to that format, does not relax or
+nullify any sections of this license as they pertain to the results of
+applying that process.
+
+10. a. A Derived Work may be distributed under a different license
+ provided that license itself honors the conditions listed in
+ Clause 6 above, in regard to the Work, though it does not have
+ to honor the rest of the conditions in this license.
+
+ b. If a Derived Work is distributed under a different license, that
+ Derived Work must provide sufficient documentation as part of
+ itself to allow each recipient of that Derived Work to honor the
+ restrictions in Clause 6 above, concerning changes from the Work.
+
+11. This license places no restrictions on works that are unrelated to
+the Work, nor does this license place any restrictions on aggregating
+such works with the Work by any means.
+
+12. Nothing in this license is intended to, or may be used to, prevent
+complete compliance by all parties with all applicable laws.
+
+
+NO WARRANTY
+===========
+
+There is no warranty for the Work. Except when otherwise stated in
+writing, the Copyright Holder provides the Work `as is', without
+warranty of any kind, either expressed or implied, including, but not
+limited to, the implied warranties of merchantability and fitness for a
+particular purpose. The entire risk as to the quality and performance
+of the Work is with you. Should the Work prove defective, you assume
+the cost of all necessary servicing, repair, or correction.
+
+In no event unless required by applicable law or agreed to in writing
+will The Copyright Holder, or any author named in the components of the
+Work, or any other party who may distribute and/or modify the Work as
+permitted above, be liable to you for damages, including any general,
+special, incidental or consequential damages arising out of any use of
+the Work or out of inability to use the Work (including, but not limited
+to, loss of data, data being rendered inaccurate, or losses sustained by
+anyone as a result of any failure of the Work to operate with any other
+programs), even if the Copyright Holder or said author or said other
+party has been advised of the possibility of such damages.
+
+
+MAINTENANCE OF THE WORK
+=======================
+
+The Work has the status `author-maintained' if the Copyright Holder
+explicitly and prominently states near the primary copyright notice in
+the Work that the Work can only be maintained by the Copyright Holder
+or simply that it is `author-maintained'.
+
+The Work has the status `maintained' if there is a Current Maintainer
+who has indicated in the Work that they are willing to receive error
+reports for the Work (for example, by supplying a valid e-mail
+address). It is not required for the Current Maintainer to acknowledge
+or act upon these error reports.
+
+The Work changes from status `maintained' to `unmaintained' if there
+is no Current Maintainer, or the person stated to be Current
+Maintainer of the work cannot be reached through the indicated means
+of communication for a period of six months, and there are no other
+significant signs of active maintenance.
+
+You can become the Current Maintainer of the Work by agreement with
+any existing Current Maintainer to take over this role.
+
+If the Work is unmaintained, you can become the Current Maintainer of
+the Work through the following steps:
+
+ 1. Make a reasonable attempt to trace the Current Maintainer (and
+ the Copyright Holder, if the two differ) through the means of
+ an Internet or similar search.
+
+ 2. If this search is successful, then enquire whether the Work
+ is still maintained.
+
+ a. If it is being maintained, then ask the Current Maintainer
+ to update their communication data within one month.
+
+ b. If the search is unsuccessful or no action to resume active
+ maintenance is taken by the Current Maintainer, then announce
+ within the pertinent community your intention to take over
+ maintenance. (If the Work is a LaTeX work, this could be
+ done, for example, by posting to comp.text.tex.)
+
+ 3a. If the Current Maintainer is reachable and agrees to pass
+ maintenance of the Work to you, then this takes effect
+ immediately upon announcement.
+
+ b. If the Current Maintainer is not reachable and the Copyright
+ Holder agrees that maintenance of the Work be passed to you,
+ then this takes effect immediately upon announcement.
+
+ 4. If you make an `intention announcement' as described in 2b. above
+ and after three months your intention is challenged neither by
+ the Current Maintainer nor by the Copyright Holder nor by other
+ people, then you may arrange for the Work to be changed so as
+ to name you as the (new) Current Maintainer.
+
+ 5. If the previously unreachable Current Maintainer becomes
+ reachable once more within three months of a change completed
+ under the terms of 3b) or 4), then that Current Maintainer must
+ become or remain the Current Maintainer upon request provided
+ they then update their communication data within one month.
+
+A change in the Current Maintainer does not, of itself, alter the fact
+that the Work is distributed under the LPPL license.
+
+If you become the Current Maintainer of the Work, you should
+immediately provide, within the Work, a prominent and unambiguous
+statement of your status as Current Maintainer. You should also
+announce your new status to the same pertinent community as
+in 2b) above.
+
+
+WHETHER AND HOW TO DISTRIBUTE WORKS UNDER THIS LICENSE
+======================================================
+
+This section contains important instructions, examples, and
+recommendations for authors who are considering distributing their
+works under this license. These authors are addressed as `you' in
+this section.
+
+Choosing This License or Another License
+----------------------------------------
+
+If for any part of your work you want or need to use *distribution*
+conditions that differ significantly from those in this license, then
+do not refer to this license anywhere in your work but, instead,
+distribute your work under a different license. You may use the text
+of this license as a model for your own license, but your license
+should not refer to the LPPL or otherwise give the impression that
+your work is distributed under the LPPL.
+
+The document `modguide.tex' in the base LaTeX distribution explains
+the motivation behind the conditions of this license. It explains,
+for example, why distributing LaTeX under the GNU General Public
+License (GPL) was considered inappropriate. Even if your work is
+unrelated to LaTeX, the discussion in `modguide.tex' may still be
+relevant, and authors intending to distribute their works under any
+license are encouraged to read it.
+
+A Recommendation on Modification Without Distribution
+-----------------------------------------------------
+
+It is wise never to modify a component of the Work, even for your own
+personal use, without also meeting the above conditions for
+distributing the modified component. While you might intend that such
+modifications will never be distributed, often this will happen by
+accident -- you may forget that you have modified that component; or
+it may not occur to you when allowing others to access the modified
+version that you are thus distributing it and violating the conditions
+of this license in ways that could have legal implications and, worse,
+cause problems for the community. It is therefore usually in your
+best interest to keep your copy of the Work identical with the public
+one. Many works provide ways to control the behavior of that work
+without altering any of its licensed components.
+
+How to Use This License
+-----------------------
+
+To use this license, place in each of the components of your work both
+an explicit copyright notice including your name and the year the work
+was authored and/or last substantially modified. Include also a
+statement that the distribution and/or modification of that
+component is constrained by the conditions in this license.
+
+Here is an example of such a notice and statement:
+
+ %% pig.dtx
+ %% Copyright 2005 M. Y. Name
+ %
+ % This work may be distributed and/or modified under the
+ % conditions of the LaTeX Project Public License, either version 1.3
+ % of this license or (at your option) any later version.
+ % The latest version of this license is in
+ % http://www.latex-project.org/lppl.txt
+ % and version 1.3 or later is part of all distributions of LaTeX
+ % version 2005/12/01 or later.
+ %
+ % This work has the LPPL maintenance status `maintained'.
+ %
+ % The Current Maintainer of this work is M. Y. Name.
+ %
+ % This work consists of the files pig.dtx and pig.ins
+ % and the derived file pig.sty.
+
+Given such a notice and statement in a file, the conditions
+given in this license document would apply, with the `Work' referring
+to the three files `pig.dtx', `pig.ins', and `pig.sty' (the last being
+generated from `pig.dtx' using `pig.ins'), the `Base Interpreter'
+referring to any `LaTeX-Format', and both `Copyright Holder' and
+`Current Maintainer' referring to the person `M. Y. Name'.
+
+If you do not want the Maintenance section of LPPL to apply to your
+Work, change `maintained' above into `author-maintained'.
+However, we recommend that you use `maintained', as the Maintenance
+section was added in order to ensure that your Work remains useful to
+the community even when you can no longer maintain and support it
+yourself.
+
+Derived Works That Are Not Replacements
+---------------------------------------
+
+Several clauses of the LPPL specify means to provide reliability and
+stability for the user community. They therefore concern themselves
+with the case that a Derived Work is intended to be used as a
+(compatible or incompatible) replacement of the original Work. If
+this is not the case (e.g., if a few lines of code are reused for a
+completely different task), then clauses 6b and 6d shall not apply.
+
+
+Important Recommendations
+-------------------------
+
+ Defining What Constitutes the Work
+
+ The LPPL requires that distributions of the Work contain all the
+ files of the Work. It is therefore important that you provide a
+ way for the licensee to determine which files constitute the Work.
+ This could, for example, be achieved by explicitly listing all the
+ files of the Work near the copyright notice of each file or by
+ using a line such as:
+
+ % This work consists of all files listed in manifest.txt.
+
+ in that place. In the absence of an unequivocal list it might be
+ impossible for the licensee to determine what is considered by you
+ to comprise the Work and, in such a case, the licensee would be
+ entitled to make reasonable conjectures as to which files comprise
+ the Work.
+
Property changes on: trunk/Master/texmf-dist/doc/latex/hep-math/license.md
___________________________________________________________________
Added: svn:eol-style
## -0,0 +1 ##
+native
\ No newline at end of property
Added: trunk/Master/texmf-dist/source/latex/hep-math/hep-math-implementation.dtx
===================================================================
--- trunk/Master/texmf-dist/source/latex/hep-math/hep-math-implementation.dtx (rev 0)
+++ trunk/Master/texmf-dist/source/latex/hep-math/hep-math-implementation.dtx 2021-11-27 21:23:37 UTC (rev 61170)
@@ -0,0 +1,1134 @@
+% \iffalse meta-comment
+%
+% Copyright (C) 2019 by Jan Hajer
+% -----------------------------------
+%
+% This file may be distributed and/or modified under the
+% conditions of the LaTeX Project Public License, either version 1.3c
+% of this license or (at your option) any later version.
+% The latest version of this license is in:
+%
+% http://www.latex-project.org/lppl.txt
+%
+% and version 1.3c or later is part of all distributions of LaTeX
+% version 2005/12/01 or later.
+%
+% \fi
+%
+% \iffalse
+
+%<package>\NeedsTeXFormat{LaTeX2e}[2005/12/01]
+%<package>\ProvidesPackage{hep-math}[2021/09/01 v1.0 Math and physics macros]
+%<documentation>\ProvidesFile{hep-math-documentation.tex}[2021/09/01 v1.0 hep-math documentation]
+%
+%<*documentation>
+
+\RequirePackage[l2tabu, orthodox]{nag}
+
+\documentclass{ltxdoc}
+\AtBeginDocument{\DeleteShortVerb{\|}}
+\AtBeginDocument{\MakeShortVerb{\"}}
+
+\EnableCrossrefs
+\CodelineIndex
+\RecordChanges
+
+\usepackage[parskip]{hep-paper}
+
+\newenvironment{columns}[1][.5]{%
+ \par\vspace{-\bigskipamount}%
+ \begin{minipage}[t]{\linewidth}%
+ \begin{minipage}[t]{#1\linewidth}%
+ \def\column{%
+ \end{minipage}%
+ \begin{minipage}[t]{\linewidth-#1\linewidth}%
+ }%
+}{\end{minipage}\end{minipage}\par}
+
+\bibliography{bibliography}
+
+\usepackage{hologo}
+
+\MacroIndent=1.5em
+\setlength{\fboxsep}{1pt}
+\AtBeginEnvironment{macrocode}{\renewcommand{\ttdefault}{clmt}}
+%</documentation>
+
+%<*driver>
+\expandafter\newif\csname ifshort\endcsname
+\shortfalse
+\begin{document}
+\DocInput{hep-math-implementation.dtx}
+\end{document}
+%</driver>
+%
+% \fi
+%
+% \CheckSum{610}
+%
+% \CharacterTable
+% {Upper-case \A\B\C\D\E\F\G\H\I\J\K\L\M\N\O\P\Q\R\S\T\U\V\W\X\Y\Z
+% Lower-case \a\b\c\d\e\f\g\h\i\j\k\l\m\n\o\p\q\r\s\t\u\v\w\x\y\z
+% Digits \0\1\2\3\4\5\6\7\8\9
+% Exclamation \! Double quote \" Hash (number) \#
+% Dollar \$ Percent \% Ampersand \&
+% Acute accent \' Left paren \( Right paren \)
+% Asterisk \* Plus \+ Comma \,
+% Minus \- Point \. Solidus \/
+% Colon \: Semicolon \; Less than \<
+% Equals \= Greater than \> Question mark \?
+% Commercial at \@ Left bracket \[ Backslash \\
+% Right bracket \] Circumflex \^ Underscore \_
+% Grave accent \` Left brace \{ Vertical bar \|
+% Right brace \} Tilde \~}
+%
+% \changes{v1.0}{2021/09/01}{Initial version of the style file.}
+%
+% \ifshort
+%<*documentation>
+% \fi
+%
+\GetFileInfo{hep-math.sty}
+
+\title{The \software{hep-math} package\thanks{This document corresponds to \software{hep-math}~\fileversion.}}
+\subtitle{Extended math macros}
+\author{Jan Hajer \email{jan.hajer at unibas.ch}}
+\date{\filedate}
+
+% \ifshort
+\begin{document}
+% \fi
+
+\newgeometry{vscale=.8, vmarginratio=3:4, includeheadfoot, left=11em, marginparwidth=4.6cm, marginparsep=3mm, right=7em}
+
+\maketitle
+
+\begin{abstract}
+The \software{hep-math} package provides some additional features beyond the \software{mathtools} and \software{amsmath} packages.
+\end{abstract}
+
+To use the package place "\usepackage{hep-math}" in the preamble.
+
+The \software{mathtools} \cite{mathtools} package is loaded, which in turn loads the \hologo{AmSLaTeX} \software{amsmath} \cite{amsmath} package.
+Horizontal spacing in inline equations and page breaks in block equations are marginally adjusted.
+\DescribeMacro{\left}
+\DescribeMacro{\right}
+Spacing around "\left" and "\right" is fixed with the \software{mleftright} package \cite{mleftright}.
+
+\section{Macros}
+
+\DescribeMacro{\mathdef}
+The "\mathdef"\marg{name}\oarg{arguments}\marg{code} macro \prefix{re}{defines} macros only within math mode without changing the text mode definition.
+
+\DescribeMacro{\i}
+\DescribeMacro{\d}
+The imaginary unit "\i" and the differential "\d" are defined using this functionality.
+
+\DescribeMacro{\overline}
+The "\overline" macro is adjusted to \overline{work also outside} of math mode using the \software{soulutf8} \cite{soulutf8} package.
+
+\DescribeMacro{\oset}
+\DescribeMacro{\overleft}
+\DescribeMacro{\overright}
+\DescribeMacro{\overleftright}
+A better looking over left right arrow is defined \ie $\overleftright{\partial}$ using a new "\oset"\marg{over}\marg{math} functionality.
+
+\DescribeMacro{\diag}
+\DescribeMacro{\sgn}
+Diagonal matrix "\diag", signum "\sgn", trace "\tr", "\Tr", and "\rank" operators are defined.
+
+\DescribeMacro{\Re}
+\DescribeMacro{\Im}
+The real and imaginary projectors are redefined to look like ordinary operators.
+
+\DescribeMacro{\sin}
+\DescribeMacro{\cos}
+\DescribeMacro{\tan}
+"\cos" and "\tan" are adjusted to have the same height as "\sin".
+
+\DescribeMacro{\accsc}
+"\arccsc" and other inverse trigonometric functions are defined.
+
+\subsection{Fractions and units}
+
+\DescribeMacro{\unit}
+\DescribeMacro{\inv}
+The correct spacing for units is provided by the macro "\unit"\oarg{value}\marg{unit} from the \software{units} package \cite{units} which can also be used in text mode.
+The macro "\inv"\oarg{power}\marg{text} allows to avoid math mode also for inverse units such as \unit[5]{\inv{fb}} typeset via "\unit[5]{\inv{fb}}".
+
+\DescribeMacro{\nicefrac}
+\DescribeMacro{\flatfrac}
+\DescribeMacro{\textfrac}
+The "\frac"\marg{number}\marg{number} macro is accompanied by "\nicefrac"\linebreak[1]\marg{number}\linebreak[1]\marg{number}, "\textfrac"\marg{number}\marg{number}, and "\flatfrac"\marg{number}\marg{number} leading to $\frac12$, $\nicefrac12$, \textfrac12, and $\flatfrac12$.
+The "\textfrac" macro is mostly intended if a font with oldstyle numerals is used.
+
+Some macros of the \software{physics} package \cite{physics} are reimplemented with a more conventional typesetting in mind.
+Finer details about mathematical typesetting can be found in \cite{gregorio:2020}.
+
+\subsection{Differentials and derivatives}
+
+\DescribeMacro{\differential}
+\DescribeMacro{\newderivative}
+\DescribeMacro{\newpartialderivative}
+The three macros "\differential"\marg{symbol}, "\newderivative""{\name}"\marg{symbol}, and "\newpartialderivative""{\name}"\marg{symbol} allow to define a differential with correct spacing, a derivative using this differential, and if necessary a partial derivative that can handle three dimensional derivatives.
+
+\DescribeMacro{\d}
+\DescribeMacro{\dv}
+These macros are used for the usual differential and derivative, producing $\d x$ via "\d x" and
+\begin{center}
+\begin{tabular}{*4c}
+"\dv[f]x" & "\dv*[f]x^n" & "\dv[f]x*^n" & "\dv*[f]x*^n" \\
+$\dv[f]x$ & $\dv*[f]x^n$ & $\dv[f]x*^n$ & $\dv*[f]x*^n$ \\
+"\dv xf" & "\dv*xf" & "\dv x*f" & "\dv*x*f" \\
+$\dv xf$ & $\dv*xf$ & $\dv x*f$ & $\dv*x*f$
+\end{tabular}
+\end{center}
+via "\dv*"\oarg{f}\marg{x}"*""^"\marg{n}.
+Upright differential can be produced via "\renewcommand" "{\diffsymbol}""{\mathrm d}".
+
+\DescribeMacro{\pd}
+\DescribeMacro{\pdv}
+Similarly a partial differential and derivative are defined that can be used according to "\pdv*"\oarg{f}\marg{x}"*""^"\marg{a}\oarg{y}"^"\marg{b}\oarg{z}"^"\marg{c}.
+\begin{center}
+\begin{tabular}{*4c}
+"\pdv[f]x" & "\pdv[f]x[y]" & "\pdv[f]x^3" & "\pdv[f]x^2[y]" \\
+$\pdv[f]x$ & $\pdv[f]x[y]$ & $\pdv[f]x^3$ & $\pdv[f]x^2[y]$ \\
+"\pdv[f]x^2[y]^3" & "\pdv[f]x[y]^3" & "\pdv x[y]f"\\
+$\pdv[f]x^2[y]^3$ & $\pdv[f]x[y]^3$ & $\pdv x[y]f$
+\end{tabular}
+\end{center}
+
+\DescribeMacro{\var}
+\DescribeMacro{\fdv}
+Similarly a functional variation and functional derivative are defined.
+
+\DescribeMacro{\cancel}
+\DescribeMacro{\slashed}
+The "\cancel"\marg{characters} macro from the \software{cancel} package \cite{cancel} and the "\slashed" \marg{character} macro from the \software{slashed} package \cite{slashed} allow to $\cancel{\text{cancel}}$ math and use the Dirac slash notation \ie $\slashed \pd$, respectively.
+
+\subsection{Paired delimiters}
+
+\DescribeMacro{\abs}
+\DescribeMacro{\norm}
+\begin{center}
+\begin{tabular}{*8r}
+"\abs x" & "\norm x" & "\norm[2]x" & "\norm*[2]x" \\
+$\abs x$ & $\norm x$ & $\norm[2]x$ & $\norm*[2]x$
+\end{tabular}
+\end{center}
+
+\DescribeMacro{\eval}
+\DescribeMacro{\order}
+\begin{center}
+\begin{tabular}{*8r}
+"\order x" & "\eval x_0^\infty" & "\eval* x_0^\infty" \\
+$\order x$ & $\eval x_0^\infty$ & $\eval* x_0^\infty$
+\end{tabular}
+\end{center}
+
+\DescribeMacro{\newpair}
+\DescribeMacro{\comm}
+\DescribeMacro{\acomm}
+The "\newpair"\marg{name}\marg{left delim} \marg{right delim}"_"\marg{subscript}"^"\marg{superscript} macro is defined and used for the definition of \prefix{anti}{commutators} and Poisson brackets.
+\begin{center}
+\begin{tabular}{*8r}
+"\pb xy" & "\comm xy" & "\acomm xy" \\
+$\pb xy$ & $\comm xy$ & $\acomm xy$
+\end{tabular}
+\end{center}
+They can easily be redefined using \eg "\newpair\comm\lbrack\rbrack_-".
+
+\DescribeMacro{\bra}
+\DescribeMacro{\ket}
+\DescribeMacro{\braket}
+\DescribeMacro{\ketbra}
+\DescribeMacro{\mel}
+\DescribeMacro{\ev}
+\DescribeMacro{\vev}
+Macros for the bra-ket notation are introduced.
+\begin{center}
+\begin{tabular}{*4c}
+"\bra x" & "\ket x" & "\braket xy" & "\ketbra xy" \\
+$\bra x$ & $\ket x$ & $\braket xy$ & $\ketbra xy$ \\
+"\mel xyz" & "\ev x" & "\ev[\Omega] x" & "\vev x" \\
+$\mel xyz$ & $\ev x$ & $\ev[\Omega] x$ & $\vev x$
+\end{tabular}
+\end{center}
+
+\DescribeMacro{\column}
+\DescribeMacro{\row}
+\begin{center}
+\begin{tabular}{*4c}
+"\column{x,y,z}" & "\row{x,y,z}" \\
+$\column{x,y,z}$ & $\row{x,y,z}$ \\
+\end{tabular}
+\end{center}
+
+\section{Environments}
+
+\DescribeMacro{eqnarray}
+The "eqnarray" environment is depreciated, the "split", "multline", "align", "multlined", "aligned", "alignedat", and "cases" environments of the \software{amsmath} and \software{mathtools} packages should be used instead.
+
+\DescribeMacro{equation}
+Use the "equation" environment for short equations.
+\begin{columns}
+\begin{verbatim}
+\begin{equation}
+ left = right \ .
+\end{equation}
+\end{verbatim}
+\column
+\begin{equation}
+\framebox[2em]{left\strut} = \framebox[7em]{right\strut} \ .
+\end{equation}
+\end{columns}
+
+\DescribeMacro{multline}
+Use the "multline" environment for longer equations.
+\begin{columns}
+\begin{verbatim}
+\begin{multline}
+ left = right 1 \\
+ + right 2 \ .
+\end{multline}
+\end{verbatim}
+\column
+\begin{multline}
+\framebox[2em]{left\strut} = \framebox[7em]{right 1\strut} \\
+\framebox[7em]{+ right 2\strut} \ .
+\end{multline}
+\end{columns}
+
+\DescribeMacro{split}
+Use the "split" sub environment for equations in which multiple equal signs should be aligned.
+\begin{columns}
+\begin{verbatim}
+\begin{equation} \begin{split}
+ left &= right 1 \\
+ &= right 2 \ .
+\end{split} \end{equation}
+\end{verbatim}
+\column
+\begin{equation}
+\begin{split}
+\framebox[2em]{left\strut} &= \framebox[7em]{right 1\strut} \\
+&= \framebox[7em]{right 2\strut} \ .
+\end{split}
+\end{equation}
+\end{columns}
+
+\DescribeMacro{align}
+Use the "align" environment for the vertical alignment and horizontal distribution of multiple equations.
+\begin{columns}
+\begin{verbatim}
+\begin{subequations} \begin{align}
+ left &= right \ , &
+ left &= right \ , \\
+ left &= right \ , &
+ left &= right \ .
+\end{align} \end{subequations}
+\end{verbatim}
+\column
+\begin{subequations}
+\begin{align}
+\framebox[2em]{left\strut} &= \framebox[3em]{right\strut} \ , &
+\framebox[2em]{left\strut} &= \framebox[3em]{right\strut} \ , \\
+\framebox[2em]{left\strut} &= \framebox[3em]{right\strut} \ , &
+\framebox[2em]{left\strut} &= \framebox[3em]{right\strut} \ .
+\end{align}
+\end{subequations}
+\end{columns}
+
+\DescribeMacro{aligned}
+Use the "aligned" environment within a "equation" environment if the aligned equations should be labeled with a single equation number.
+
+\DescribeMacro{multlined}
+Use the "multlined" environment if either "split" or "align" contain very long lines.
+\begin{columns}
+\begin{verbatim}
+\begin{equation} \begin{split}
+ left &= right 1 \\ &=
+ \begin{multlined}[t]
+ right 2 \\ + right 3 \ .
+ \end{multlined}
+\end{split} \end{equation}
+\end{verbatim}
+\column
+\begin{equation}
+\begin{split}
+\framebox[2em]{left\strut} &= \framebox[7em]{right 1\strut} \\ &=
+ \begin{multlined}[t]
+ \framebox[7em]{right 2\strut} \\
+ \framebox[7em]{+ right 3\strut} \ .
+\end{multlined}
+\end{split}
+\end{equation}
+\end{columns}
+
+\DescribeMacro{alignat}
+Use the "alignat" environment together with the "\mathllap" macro for the alignment of multiple equations with vastly different lengths.
+\begin{columns}
+\begin{verbatim}
+\begin{subequations}
+\begin{alignat}{2}
+ left &= long right && \ , \\
+ le. 2 &= ri. 2 \ , &
+ \mathllap{le. 3 = ri. 3} & \ .
+\end{alignat}
+\end{subequations}
+\end{verbatim}
+\column
+\begin{subequations}
+\begin{alignat}{2}
+\framebox[2em]{left\strut} &=
+\framebox[11em]{long right\strut} && \ , \\
+\framebox[2em]{le.\ 2\strut}
+&= \framebox[2.5em]{ri.\ 2\strut} \ , &
+\mathllap{\framebox[2em]{le.\ 3\strut}
+= \framebox[2.5em]{ri.\ 3\strut}} & \ .
+\end{alignat}
+\end{subequations}
+\end{columns}
+
+As a rule of thumb if you have to use "\notag", "\nonumber", or perform manual spacing via "\quad" you are probably using the wrong environment.
+
+% \ifshort
+\printbibliography
+
+\end{document}
+%
+%</documentation>
+% \fi
+%
+% \StopEventually{
+% \printbibliography
+% \PrintChanges
+% }
+%
+% \appendix
+%
+% \section{Implementation}
+%
+%<*package>
+%
+% Load the \software{mathtools} package \cite{mathtools} which loads the \software{amsmath} package \cite{amsmath}.
+% Allow page breaks within equations if necessary.
+% Adjust the thick and med mu skips slightly.
+% \begin{macrocode}
+\RequirePackage{mathtools}
+\allowdisplaybreaks[1]
+\thickmuskip=5mu plus 3mu minus 1mu
+\medmuskip=4mu plus 2mu minus 3mu
+% \end{macrocode}
+%
+% \begin{macro}{\mathdef}
+% Define the "\mathdef"\marg{name}\oarg{arguments}\marg{macro} macro which \prefix{re}{defines} macros in math mode only.
+% This macro is implemented using the \software{xparse} package \cite{xparse}.
+% \begin{macrocode}
+\RequirePackage{xparse}
+\DeclareDocumentCommand{\mathdef}{mO{0}m}{%
+ \expandafter\let\csname hep at text\string#1\endcsname=#1
+ \expandafter\newcommand\csname hep at math\string#1\endcsname[#2]{#3}
+ \DeclareRobustCommand#1{%
+ \ifmmode
+ \expandafter\let\expandafter\next\csname%
+ hep at math\string#1\endcsname%
+ \else
+ \expandafter\let\expandafter\next\csname%
+ hep at text\string#1\endcsname%
+ \fi
+ \next
+ }%
+}
+% \end{macrocode}
+% \end{macro}
+%
+% \begin{macro}{\i}
+% Provide an upright imaginary unit in math mode.
+% \begin{macrocode}
+\AtBeginDocument{\mathdef{\i}{\operatorname{i}}}
+% \end{macrocode}
+% \end{macro}
+%
+% \begin{macro}{\overline}
+% Redefine "\overline" to be a text macro using the \software{soulutf8} package \cite{soulutf8}.
+% Extend it as a math macro with the original definition from the \software{amsmath} package \cite{amsmath}.
+% \begin{macrocode}
+\RequirePackage{soulutf8}
+% \def\overline#1{{\renewcommand{\ULdepth}{-1.9ex}{}\uline{#1}}}
+\newcommand\textoverline[1]{{\setul{-1.9ex}{}\ul{#1}}}
+\let\overline\textoverline
+\DeclareRobustCommand{\over at line}[1]{\@@overline{#1}}
+\mathdef{\overline}{\over at line}
+% \end{macrocode}
+% \end{macro}
+%
+% \begin{macro}{\oset}
+% Define a new overset macro "\oset"\oarg{offset}\marg{over}\marg{base}
+% \begin{macrocode}
+\newcommand{\oset}[3][-1pt]{%
+ \text{\raisebox{.2ex}{$\mathop{#3}\limits^{%
+ \vbox to#1{\kern-2\ex@\hbox{$\scriptscriptstyle#2$}\vss}%
+ }$}}%
+}
+% \end{macrocode}
+% \end{macro}
+% \begin{macro}{\overleftright}
+% Define a over left right arrow "\overleftright"\marg{base}.
+% \begin{macrocode}
+\newcommand{\overleft}[1]{\oset{\leftarrow}{#1}}
+\newcommand{\overright}[1]{\oset{\rightarrow}{#1}}
+\newcommand{\overleftright}[1]{\oset{\leftrightarrow}{#1}}
+% \end{macrocode}
+% \end{macro}
+%
+% \begin{macro}{eqnarray}
+% Undefine the "eqnarray" environment if not prevented by package option.
+% \begin{macrocode}
+% \newif\ifhep at eqnarray\hep at eqnarraytrue
+% \ifhep at eqnarray\else
+% \let\eqnarray\@undefined
+% \let\endeqnarray\@undefined
+% \fi
+% \end{macrocode}
+% \end{macro}
+%
+% \subsection{Operators}
+%
+% \begin{macro}{\tr}
+% \begin{macro}{\Tr}
+% \begin{macro}{\rank}
+% \begin{macro}{\erf}
+% \begin{macro}{\Res}
+% \begin{macro}{\sgn}
+% \begin{macro}{\sgn}
+% \begin{macro}{\diag}
+% Provide the "\diag", "\sgn", and some other operators.
+% \begin{macrocode}
+\DeclareMathOperator{\tr}{tr}
+\DeclareMathOperator{\Tr}{Tr}
+\DeclareMathOperator{\rank}{rank}
+\DeclareMathOperator{\erf}{erf}
+\DeclareMathOperator{\Res}{Res}
+\DeclareMathOperator{\sgn}{sgn}
+\DeclareMathOperator{\diag}{diag}
+\let\det\relax\DeclareMathOperator{\det}{det}
+% \end{macrocode}
+% \end{macro}
+% \end{macro}
+% \end{macro}
+% \end{macro}
+% \end{macro}
+% \end{macro}
+% \end{macro}
+% \end{macro}
+
+% \begin{macro}{\Re}
+% \begin{macro}{\Im}
+% Redefine the real and imaginary projectors.
+% \begin{macrocode}
+\let\Re\relax\DeclareMathOperator{\Re}{Re}
+\let\Im\relax\DeclareMathOperator{\Im}{Im}
+% \end{macrocode}
+% \end{macro}
+% \end{macro}
+
+% \begin{macro}{\transpose}
+% \begin{macro}{\trans}
+% Define a transpose symbol.
+% \begin{macrocode}
+\newcommand*{\hep at transpose}[2]{\raisebox{\depth}{$\m at th#1\intercal$}}
+\newcommand*{\transpose}{{\mathpalette\hep at transpose{}}}
+\let\trans\transpose
+% \end{macrocode}
+% \end{macro}
+% \end{macro}
+
+
+
+% \subsubsection{Trigonometric functions}
+%
+% \begin{macro}{\cos}
+% \begin{macro}{\tan}
+% Adjust the height of of cos and tan to be equal to sin.
+% \begin{macrocode}
+\let\cos\undefined\DeclareMathOperator{\cos}{cos\vphantom{i}}
+\let\tan\undefined\DeclareMathOperator{\tan}{tan\vphantom{i}}
+% \end{macrocode}
+% \end{macro}
+% \end{macro}
+% \begin{macro}{\arccsc}
+% \begin{macro}{\arcsec}
+% \begin{macro}{\arccot}
+% Define arc operators.
+% \begin{macrocode}
+\DeclareMathOperator{\arccsc}{arccsc}
+\DeclareMathOperator{\arcsec}{arcsec}
+\DeclareMathOperator{\arccot}{arccot}
+% \end{macrocode}
+% \end{macro}
+% \end{macro}
+% \end{macro}
+% \begin{macro}{\asin}
+% \begin{macro}{\acos}
+% \begin{macro}{\atan}
+% \begin{macro}{\acsc}
+% \begin{macro}{\asec}
+% \begin{macro}{\acot}
+% Define shorthand for arc operators.
+% \begin{macrocode}
+\DeclareMathOperator{\asin}{asin}
+\DeclareMathOperator{\acos}{acos}
+\DeclareMathOperator{\atan}{atan}
+\DeclareMathOperator{\acsc}{acsc}
+\DeclareMathOperator{\asec}{asec}
+\DeclareMathOperator{\acot}{acot}
+% \end{macrocode}
+% \end{macro}
+% \end{macro}
+% \end{macro}
+% \end{macro}
+% \end{macro}
+% \end{macro}
+% \begin{macro}{\csch}
+% \begin{macro}{\sech}
+% Define csch and sech operators.
+% \begin{macrocode}
+\DeclareMathOperator{\csch}{csch}
+\DeclareMathOperator{\sech}{sech}
+% \end{macrocode}
+% \end{macro}
+% \end{macro}
+%
+% \subsection{Units and fractions}
+%
+% \begin{macro}{\unit}
+% Load the \software{units} package \cite{units} which provides the "\units" and "\nicefrac" macros.
+% \begin{macrocode}
+\RequirePackage{units}
+% \end{macrocode}
+% \end{macro}
+%
+% \begin{macro}{\inv}
+% Provide a macro for the inverse, useful in combination with the unit macro in text mode.
+% \begin{macrocode}
+\newcommand{\inv}[2][1]{#2\ensuremath{^{-#1}}}
+% \end{macrocode}
+% \end{macro}
+%
+% \begin{macro}{\textfrac}
+% Provide the "\textfrac" macro useful in combination with a font using lining numerals.
+% \begin{macrocode}
+\newcommand{\textfrac}[2]{\ensuremath{\nicefrac{\text{#1}}{\text{#2}}}}
+% \end{macrocode}
+% \end{macro}
+%
+% \begin{macro}{\flatfrac}
+% Provide a flat fraction.
+% \begin{macrocode}
+\DeclarePairedDelimiterX{\hep at flatfrac}[2]{.}{.}{%
+ #1\delimsize/\hep at left@delim#2%
+}
+\NewDocumentCommand{\flatfrac}{somm}{%
+ \IfBooleanTF{#1}{%
+ \hep at flatfrac*{#3}{#4}%
+ }{%
+ \IfNoValueTF{#2}{\,\hep at left@delim#3/\hep at left@delim#4\,%
+ }{%
+ \hep at flatfrac[#2]{#3}{#4}%
+ }%
+ }%
+}
+% \end{macrocode}
+% \end{macro}
+%
+% \subsubsection{Differentials and derivatives}
+%
+% \begin{macro}{\differential}
+% Define a generic differential "\differential".
+% \begin{macrocode}
+\newcommand{\differential}[1]{\mathop{}\!#1}
+% \end{macrocode}
+% \end{macro}
+%
+% \begin{macro}{\newderivative}
+% Define a generic derivative.
+% \begin{macrocode}
+\newcommand\newderivative[2]{
+ \NewDocumentCommand{#1}{somse{^}}{%
+ \IfBooleanTF{##4}{%
+ \IfBooleanTF{##1}{\nicefrac}{\frac}%
+ }{%
+ \IfBooleanTF{##1}{\flatfrac}{\dfrac}%
+ }{%
+ \differential#2\IfValueT{##5}{^{##5\!}}\IfValueT{##2}{##2}%
+ }{%
+ \differential#2{##3}\IfValueT{##5}{^{##5}}%
+ }%
+ }
+}
+% \end{macrocode}
+% \end{macro}
+%
+% \begin{macro}{\newpartialderivative}
+% Define a generic partial derivative
+% \begin{macrocode}
+\newcommand\newpartialderivative[2]{
+ \NewDocumentCommand{#1}{somsE{^}{1}oE{^}{1}oE{^}{1}}{%
+ \def\hep at one{\IfValueTF{##6}{##7}{0}}
+ \def\hep at two{\IfValueTF{##8}{##9}{0}}
+ \def\hep at sum{\the\numexpr##5+\hep at one+\hep at two\relax}
+ \IfBooleanTF{##4}{%
+ \IfBooleanTF{##1}{\nicefrac}{\frac}%
+ }{%
+ \IfBooleanTF{##1}{\flatfrac}{\dfrac}%
+ }{%
+ \differential#2\ifnum\hep at sum=1\relax\else{^{\hep at sum\!}}\fi
+ \IfValueT{##2}{##2}%
+ }{%
+ \differential#2{##3}\ifnum##5=1\relax\else{^{##5}}\fi%
+ \IfValueT{##6}{#2##6\ifnum##7=1\relax\else{^{##7}}\fi}%
+ \IfValueT{##8}{#2##8\ifnum##9=1\relax\else{^{##9}}\fi}%
+ }%
+ }
+}
+% \end{macrocode}
+% \end{macro}
+%
+% \begin{macro}{\diffsymbol}
+% \begin{macro}{\diff}
+% \begin{macro}{\d}
+% \begin{macro}{\derivative}
+% \begin{macro}{\dv}
+% Define the differential "\d" and the usual derivative.
+% \begin{macrocode}
+\providecommand{\diffsymbol}{d}
+\newcommand{\diff}{\differential\diffsymbol}
+\AtBeginDocument{\mathdef{\d}{\diff}}
+\newderivative{\derivative}{\diffsymbol}
+\newcommand\dv{\derivative}
+% \end{macrocode}
+% \end{macro}
+% \end{macro}
+% \end{macro}
+% \end{macro}
+% \end{macro}
+%
+% \begin{macro}{\partialdifferential}
+% \begin{macro}{\pd}
+% \begin{macro}{\partialderivative}
+% \begin{macro}{\pdv}
+% Define the partial differential and derivative.
+% \begin{macrocode}
+\newcommand\partialdifferential{\differential\partial}
+\newcommand\pd{\partialdifferential}
+\newpartialderivative{\partialderivative}{\partial}
+\newcommand\pdv{\partialderivative}
+% \end{macrocode}
+% \end{macro}
+% \end{macro}
+% \end{macro}
+% \end{macro}
+%
+% \begin{macro}{\gaugediffsymbol}
+% \begin{macro}{\gaugediff}
+% \begin{macro}{\D}
+% Define the gauge covariant differential "\D".
+% \begin{macrocode}
+\providecommand{\gaugediffsymbol}{D}
+\newcommand{\gaugediff}{\differential\gaugediffsymbol}
+\newcommand{\D}{\gaugediff}
+% \end{macrocode}
+% \end{macro}
+% \end{macro}
+% \end{macro}
+%
+% \begin{macro}{\covariantdiff}
+% \begin{macro}{\cd}
+% Define the covariant differential "\cd".
+% \begin{macrocode}
+\newcommand{\covariantdiff}{\differential\nabla}
+\newcommand{\cd}{\covariantdiff}
+% \end{macrocode}
+% \end{macro}
+% \end{macro}
+%
+% \begin{macro}{\variation}
+% \begin{macro}{\var}
+% \begin{macro}{\functionalderivative}
+% \begin{macro}{\fdv}
+% Define the functional variation and derivative.
+% \begin{macrocode}
+\newcommand\variation{\differential\delta}
+\newcommand\var{\variation}
+\newpartialderivative{\functionalderivative}{\delta}
+\newcommand\fdv{\functionalderivative}
+% \end{macrocode}
+% \end{macro}
+% \end{macro}
+% \end{macro}
+% \end{macro}
+%
+% \begin{macro}{\cancel}
+% \begin{macro}{\slashed}
+% Load the \software{cancel} \cite{cancel} and \software{slashed} \cite{slashed} packages which provide the "\cancel" and "\slashed" macros.
+% \begin{macrocode}
+\RequirePackage{cancel}
+\RequirePackage{slashed}
+\declareslashed{}{/}{.06}{0}{\D}
+\declareslashed{}{/}{.055}{0}{\pd}
+% \end{macrocode}
+% \end{macro}
+% \end{macro}
+%
+% \subsection{Paired delimiters}
+%
+% \begin{macro}{\left}
+% \begin{macro}{\right}
+% Load the \software{mleftright} package \cite{mleftright} and adjust the spacing around "\left" and "\right".
+% \begin{macrocode}
+\RequirePackage{mleftright}
+\mleftright
+% \end{macrocode}
+% \end{macro}
+% \end{macro}
+%
+% \begin{macro}{\noargumentsymbol}
+% \begin{macro}{\optionalargument}
+% Allow for macros to have an empty argument.
+% \begin{macrocode}
+\newcommand{\noargumentsymbol}{\:\cdot\:}
+\newcommand{\optionalargument}[1]{\ifblank{#1}{\noargumentsymbol}{#1}}
+% \end{macrocode}
+% \end{macro}
+% \end{macro}
+%
+% \begin{macro}{\abs}
+% \begin{macro}{\norm}
+% \begin{macro}{\pnorm}
+% Absolute value and norm.
+% \begin{macrocode}
+\DeclarePairedDelimiterX\abs[1]\lvert\rvert{\optionalargument{#1}}
+\DeclarePairedDelimiterX\hep at norm[1]\lVert\rVert{\optionalargument{#1}}
+\DeclarePairedDelimiterXPP\hep at pnorm[2]{}\lVert\rVert{_{#1}}{#2}
+\NewDocumentCommand{\norm}{som}{%
+ \IfValueTF{#2}{%
+ \IfBooleanTF{#1}{\hep at pnorm*}{\hep at pnorm}{#2}%
+ }{%
+ \IfBooleanTF{#1}{\hep at norm*}{\hep at norm}%
+ }{\optionalargument{#3}}%
+}
+% \end{macrocode}
+% \end{macro}
+% \end{macro}
+% \end{macro}
+
+% \begin{macro}{\ordersymbol}
+% \begin{macro}{\order}
+% Order symbol and macro.
+% \begin{macrocode}
+\providecommand{\ordersymbol}{\mathcal{O}}
+\DeclarePairedDelimiterXPP\order[1]{\ordersymbol}(){}{#1}
+% \end{macrocode}
+% \end{macro}
+% \end{macro}
+
+% \begin{macro}{\evaluated}
+% \begin{macro}{\eval}
+% Vertical evaluation bar
+% \begin{macrocode}
+\DeclarePairedDelimiter{\hep at evaluated}{.}{\rvert}
+\NewDocumentCommand{\evaluated}{som}{%
+ \IfBooleanTF{#1}{%
+ \hep at evaluated*{#3}%
+ }{%
+ \IfNoValueTF{#2}{#3\rvert}{\hep at evaluated[#2]{#3}}%
+ }%
+}
+\newcommand\eval{\evaluated}
+% \end{macrocode}
+% \end{macro}
+% \end{macro}
+
+% \begin{macro}{\row}
+% \begin{macro}{\column}
+% Shortcuts for rows and columns
+% \begin{macrocode}
+\newcommand*{\rowseperator}{,\,}
+\ExplSyntaxOn
+\newcommand*{\hep at row}[1]{
+ \seq_set_split:Nnn\hep at seq{,}{#1}
+ \begin{matrix}\seq_use:Nn\hep at seq{\rowseperator}\end{matrix}
+}
+\newcommand*{\hep at column}[1]{%
+ \seq_set_split:Nnn\hep at seq{,}{#1}%
+ \begin{matrix}\seq_use:Nn\hep at seq{\\}\end{matrix}%
+}
+\ExplSyntaxOff
+\DeclarePairedDelimiterX{\row}[1]{(}{)}{\hep at row{#1}}
+\NewDocumentCommand{\column}{me{^}e{_}}{%
+ \left(\hep at column{#1}\right)\IfValueT{#2}{^{\!\!\!#2}}\IfValueT{#3}{_{\!\!\!#3}}%
+}
+% \end{macrocode}
+% \end{macro}
+% \end{macro}
+
+% \subsubsection{Set and Probability}
+%
+% \begin{macro}{\midbar}
+% Define a generic midbar.
+% \begin{macrocode}
+\newcommand\hep at left@delim{\mathopen{}}
+\providecommand{\midbar}[1][]{%
+ \nonscript\:#1\vert\allowbreak\nonscript\:\hep at left@delim%
+}
+% \end{macrocode}
+% \end{macro}
+
+% \begin{macro}{\suchthat}
+% \begin{macro}{\set}
+% Define a "\set" macro that allows a midbar via "\suchthat".
+% \begin{macrocode}
+\providecommand\suchthat{\midbar}
+\DeclarePairedDelimiterX\set[1]\{\}{%
+ \renewcommand\suchthat{\midbar[\delimsize]}#1%
+}
+% \end{macrocode}
+% \end{macro}
+% \end{macro}
+
+% \begin{macro}{\probabilitysymbol}
+% \begin{macro}{\given}
+% \begin{macro}{\Pr}
+% Redefine the "\Pr" macro to a macro that takes a "\given" macro and generates a midbar.
+% \begin{macrocode}
+\providecommand{\probabilitysymbol}{\operatorname{Pr}}
+\providecommand\given{\midbar}
+\DeclarePairedDelimiterXPP\hep at Pr[1]{%
+ \probabilitysymbol}(){}{%
+ \renewcommand\given{\midbar[\delimsize]}#1%
+}
+\let\Pr\relax
+\NewDocumentCommand{\Pr}{so}{%
+ \IfValueTF{#2}{%
+ \IfBooleanTF{#1}{\hep at Pr*}{\hep at Pr}{#2}%
+ }{%
+ \probabilitysymbol%
+ }%
+}
+% \end{macrocode}
+% \end{macro}
+% \end{macro}
+% \end{macro}
+
+% \subsubsection{Commutators}
+%
+% \begin{macro}{\newpair}
+% Define the "\newpair" macro that generates pairs surrounded by brackets.
+% \begin{macrocode}
+\NewDocumentCommand{\newpair}{mmme{_}e{^}}{%
+ \IfNoValueTF{#4}{%
+ \IfNoValueTF{#5}{%
+ \DeclarePairedDelimiterX{#1}[2]{#2}{#3}%
+ }{%
+ \DeclarePairedDelimiterXPP{#1}[2]{}{#2}{#3}{^{#5}}%
+ }%
+ }{%
+ \DeclarePairedDelimiterXPP{#1}[2]{}{#2}{#3}{_{#4}}%
+ }{%
+ \optionalargument{##1},\optionalargument{##2}%
+ }%
+}
+% \end{macrocode}
+%\end{macro}
+%
+% \begin{macro}{\innerproduct}
+% \begin{macro}{\poissonbracket}
+% \begin{macro}{\pb}
+% \begin{macro}{\commutator}
+% \begin{macro}{\comm}
+% \begin{macro}{\anticommutator}
+% \begin{macro}{\acomm}
+% Poissonbracket, commutator and anti-commutator.
+% \begin{macrocode}
+\newpair\innerproduct\langle\rangle
+\newpair\poissonbracket\lbrace\rbrace
+\newpair\commutator\lbrack\rbrack
+\newcommand\pb{\poissonbracket}
+\newcommand\comm{\commutator}
+\newcommand\acomm{\poissonbracket}
+% \end{macrocode}
+% \end{macro}
+% \end{macro}
+% \end{macro}
+% \end{macro}
+% \end{macro}
+% \end{macro}
+% \end{macro}
+%
+% \subsubsection{Bra-ket notation}
+%
+% \begin{macro}{\braketspace}
+% Define the space within braket notation.
+% \begin{macrocode}
+\providecommand\braketspace{\mskip1mu}
+\newcommand\hep at midvert{%
+ \braketspace\delimsize\vert\braketspace\hep at left@delim%
+}
+% \end{macrocode}
+% \end{macro}
+%
+% \begin{macro}{\braket}
+% Define the braket macro.
+% \begin{macrocode}
+\DeclarePairedDelimiterX\braket[2]{\langle}{\rangle}{%
+ \braketspace#1\hep at midvert#2\braketspace%
+}
+% \end{macrocode}
+% \end{macro}
+
+% \begin{macro}{\bra}
+% Define the bra macro.
+% \begin{macrocode}
+\DeclarePairedDelimiterXPP\hep at bra[1]{%
+ }{\langle}{\rvert}{\braketspace}{\braketspace#1\braketspace%
+}
+\NewDocumentCommand{\bra}{smt\ket sgt\ketbra sgg}{%
+ \IfBooleanTF{#6}{%
+ \IfBooleanTF{#1}{\braket*{#2}{#8}}{\braket{#2}{#8}}%
+ \IfBooleanTF{#7}{\bra*{#9}}{\bra{#9}}%
+ }{
+ \IfBooleanTF{#3}{%
+ \IfBooleanTF{#1}{\braket*}{%
+ \IfBooleanTF{#4}{\braket*}{\braket}}{#2}{#5%
+ }%
+ }{%
+ \IfBooleanTF{#1}{\hep at bra*}{\hep at bra}{#2}%
+ }%
+ }%
+}
+% \end{macrocode}
+% \end{macro}
+
+% \begin{macro}{\ket}
+% Define the ket macro.
+% \begin{macrocode}
+\DeclarePairedDelimiterXPP\ket[1]{%
+ \braketspace}{\lvert}{\rangle}{%
+}{%
+ \braketspace\hep at left@delim#1\braketspace%
+}
+% \end{macrocode}
+% \end{macro}
+
+% \begin{macro}{\ketbra}
+% Define the ketbra macro.
+% \begin{macrocode}
+\NewDocumentCommand{\ketbra}{smm}{%
+ \IfBooleanTF{#1}{%
+ \ket*{#2}\bra*{#3}%
+ }{%
+ \ket{#2}\bra{#3}%
+ }%
+}
+% \end{macrocode}
+% \end{macro}
+
+% \begin{macro}{\matrixelement}
+% \begin{macro}{\mel}
+% Define the matrixelement macro.
+% \begin{macrocode}
+\DeclarePairedDelimiterX\matrixelement[3]{%
+ \langle}{\rangle
+}{%
+ \braketspace#1\hep at midvert#2\hep at midvert#3\braketspace%
+}
+\newcommand\matrixel{\matrixelement}
+\newcommand\mel{\matrixelement}
+% \end{macrocode}
+% \end{macro}
+% \end{macro}
+
+% \begin{macro}{\expectationvalue}
+% \begin{macro}{\ev}
+% \begin{macro}{\vev}
+% Define the expectationvalue and vev macros.
+% \begin{macrocode}
+\DeclarePairedDelimiterX\hep at expvalue[1]{\langle}{\rangle}{%
+ \braketspace#1\braketspace%
+}
+\NewDocumentCommand{\expectationvalue}{som}{%
+ \IfNoValueTF{#2}{%
+ \IfBooleanTF{#1}{\hep at expvalue*}{\hep at expvalue}{#3}%
+ }{%
+ \IfBooleanTF{#1}{\matrixelement*}{\matrixelement}{#2}{#3}{#2}%
+ }%
+}
+\newcommand\ev{\expectationvalue}
+\newcommand\vev[1]{\expectationvalue[0]{#1}}
+% \end{macrocode}
+% \end{macro}
+% \end{macro}
+% \end{macro}
+%
+%</package>
+%
+% \section{Test}
+%
+%<*test>
+%
+% \begin{macrocode}
+\documentclass{article}
+
+\usepackage{hep-math}
+
+\begin{document}
+
+\begin{gather}
+ \bra{x}\ket{y}
+ \braket*{x}{y}\\
+ \dv[f]{x}^3
+ \pdv[f]{x}[y]^2[z]^3
+ \fdv[f]{x}^3[y]\\
+ \set{x \suchthat x \in X}
+\end{gather}
+
+\end{document}
+
+% \end{macrocode}
+%</test>
+%
+% \section{Readme}
+%
+%<*readme>
+%
+% \begin{macrocode}
+# The `hep-math` package
+
+Extended math macros
+
+## Introduction
+
+The `hep-math` package provides some additional features beyond the `mathtools` and `amsmath` packages.
+
+To use the package place `\usepackage{hep-math}` in the preamble.
+
+## Author
+
+Jan Hajer
+
+## License
+
+This file may be distributed and/or modified under the conditions of the `LaTeX` Project Public License, either version 1.3c of this license or (at your option) any later version.
+The latest version of this license is in `http://www.latex-project.org/lppl.txt` and version 1.3c or later is part of all distributions of LaTeX version 2005/12/01 or later.
+% \end{macrocode}
+%
+%</readme>
+%
+% \Finale
+
+\endinput
+
+% \PrintIndex
+% makeindex -s gglo.ist -o hep-math-implementation.gls hep-math-implementation.glo
+% makeindex -s gglo.ist -o hep-math-implementation.ind hep-math-implementation.idx
Property changes on: trunk/Master/texmf-dist/source/latex/hep-math/hep-math-implementation.dtx
___________________________________________________________________
Added: svn:eol-style
## -0,0 +1 ##
+native
\ No newline at end of property
Added: trunk/Master/texmf-dist/source/latex/hep-math/hep-math.ins
===================================================================
--- trunk/Master/texmf-dist/source/latex/hep-math/hep-math.ins (rev 0)
+++ trunk/Master/texmf-dist/source/latex/hep-math/hep-math.ins 2021-11-27 21:23:37 UTC (rev 61170)
@@ -0,0 +1,49 @@
+%% Copyright (C) 2019-2020 by Jan Hajer
+%%
+%% This file may be distributed and/or modified under the
+%% conditions of the LaTeX Project Public License, either
+%% version 1.3c of this license or (at your option) any later
+%% version. The latest version of this license is in:
+%%
+%% http://www.latex-project.org/lppl.txt
+%%
+%% and version 1.3c or later is part of all distributions of
+%% LaTeX version 2005/12/01 or later.
+
+\input docstrip.tex
+\keepsilent
+\usedir{tex/latex/hep-math}
+
+\preamble
+This is a generated file.
+Copyright (C) 2019-2020 by Jan Hajer
+This file may be distributed and/or modified under the
+conditions of the LaTeX Project Public License, either
+version 1.3c of this license or (at your option) any later
+version. The latest version of this license is in:
+http://www.latex-project.org/lppl.txt
+and version 1.3c or later is part of all distributions of
+LaTeX version 2005/12/01 or later.
+\endpreamble
+
+\generate{
+ \file{hep-math-documentation.tex}{\from{hep-math-implementation.dtx}{documentation}}
+ \file{hep-math.sty}{\from{hep-math-implementation.dtx}{package}}
+ \file{hep-math-test.tex}{\from{hep-math-implementation.dtx}{test}}
+ \nopreamble\nopostamble\file{README-hep-math.md}{\from{hep-math-implementation.dtx}{readme}}
+}
+
+\Msg{*********************************************************}
+\Msg{*}
+\Msg{* To finish the installation you have to move the}
+\Msg{* following file into a directory searched by TeX:}
+\Msg{*}
+\Msg{* \space\space hep-math.sty}
+\Msg{*}
+\Msg{* To produce the documentation run the file}
+\Msg{* hep-math-documentation.dtx through LaTeX.}
+\Msg{*}
+\Msg{* Happy TeXing!}
+\Msg{*********************************************************}
+
+\endbatchfile
Added: trunk/Master/texmf-dist/tex/latex/hep-math/hep-math.sty
===================================================================
--- trunk/Master/texmf-dist/tex/latex/hep-math/hep-math.sty (rev 0)
+++ trunk/Master/texmf-dist/tex/latex/hep-math/hep-math.sty 2021-11-27 21:23:37 UTC (rev 61170)
@@ -0,0 +1,305 @@
+%%
+%% This is file `hep-math.sty',
+%% generated with the docstrip utility.
+%%
+%% The original source files were:
+%%
+%% hep-math-implementation.dtx (with options: `package')
+%% This is a generated file.
+%% Copyright (C) 2019-2020 by Jan Hajer
+%% This file may be distributed and/or modified under the
+%% conditions of the LaTeX Project Public License, either
+%% version 1.3c of this license or (at your option) any later
+%% version. The latest version of this license is in:
+%% http://www.latex-project.org/lppl.txt
+%% and version 1.3c or later is part of all distributions of
+%% LaTeX version 2005/12/01 or later.
+
+\NeedsTeXFormat{LaTeX2e}[2005/12/01]
+\ProvidesPackage{hep-math}[2021/09/01 v1.0 Math and physics macros]
+
+\RequirePackage{mathtools}
+\allowdisplaybreaks[1]
+\thickmuskip=5mu plus 3mu minus 1mu
+\medmuskip=4mu plus 2mu minus 3mu
+\RequirePackage{xparse}
+\DeclareDocumentCommand{\mathdef}{mO{0}m}{%
+ \expandafter\let\csname hep at text\string#1\endcsname=#1
+ \expandafter\newcommand\csname hep at math\string#1\endcsname[#2]{#3}
+ \DeclareRobustCommand#1{%
+ \ifmmode
+ \expandafter\let\expandafter\next\csname%
+ hep at math\string#1\endcsname%
+ \else
+ \expandafter\let\expandafter\next\csname%
+ hep at text\string#1\endcsname%
+ \fi
+ \next
+ }%
+}
+\AtBeginDocument{\mathdef{\i}{\operatorname{i}}}
+\RequirePackage{soulutf8}
+\newcommand\textoverline[1]{{\setul{-1.9ex}{}\ul{#1}}}
+\let\overline\textoverline
+\DeclareRobustCommand{\over at line}[1]{\@@overline{#1}}
+\mathdef{\overline}{\over at line}
+\newcommand{\oset}[3][-1pt]{%
+ \text{\raisebox{.2ex}{$\mathop{#3}\limits^{%
+ \vbox to#1{\kern-2\ex@\hbox{$\scriptscriptstyle#2$}\vss}%
+ }$}}%
+}
+\newcommand{\overleft}[1]{\oset{\leftarrow}{#1}}
+\newcommand{\overright}[1]{\oset{\rightarrow}{#1}}
+\newcommand{\overleftright}[1]{\oset{\leftrightarrow}{#1}}
+\DeclareMathOperator{\tr}{tr}
+\DeclareMathOperator{\Tr}{Tr}
+\DeclareMathOperator{\rank}{rank}
+\DeclareMathOperator{\erf}{erf}
+\DeclareMathOperator{\Res}{Res}
+\DeclareMathOperator{\sgn}{sgn}
+\DeclareMathOperator{\diag}{diag}
+\let\det\relax\DeclareMathOperator{\det}{det}
+
+\let\Re\relax\DeclareMathOperator{\Re}{Re}
+\let\Im\relax\DeclareMathOperator{\Im}{Im}
+
+\newcommand*{\hep at transpose}[2]{\raisebox{\depth}{$\m at th#1\intercal$}}
+\newcommand*{\transpose}{{\mathpalette\hep at transpose{}}}
+\let\trans\transpose
+
+\let\cos\undefined\DeclareMathOperator{\cos}{cos\vphantom{i}}
+\let\tan\undefined\DeclareMathOperator{\tan}{tan\vphantom{i}}
+\DeclareMathOperator{\arccsc}{arccsc}
+\DeclareMathOperator{\arcsec}{arcsec}
+\DeclareMathOperator{\arccot}{arccot}
+\DeclareMathOperator{\asin}{asin}
+\DeclareMathOperator{\acos}{acos}
+\DeclareMathOperator{\atan}{atan}
+\DeclareMathOperator{\acsc}{acsc}
+\DeclareMathOperator{\asec}{asec}
+\DeclareMathOperator{\acot}{acot}
+\DeclareMathOperator{\csch}{csch}
+\DeclareMathOperator{\sech}{sech}
+\RequirePackage{units}
+\newcommand{\inv}[2][1]{#2\ensuremath{^{-#1}}}
+\newcommand{\textfrac}[2]{\ensuremath{\nicefrac{\text{#1}}{\text{#2}}}}
+\DeclarePairedDelimiterX{\hep at flatfrac}[2]{.}{.}{%
+ #1\delimsize/\hep at left@delim#2%
+}
+\NewDocumentCommand{\flatfrac}{somm}{%
+ \IfBooleanTF{#1}{%
+ \hep at flatfrac*{#3}{#4}%
+ }{%
+ \IfNoValueTF{#2}{\,\hep at left@delim#3/\hep at left@delim#4\,%
+ }{%
+ \hep at flatfrac[#2]{#3}{#4}%
+ }%
+ }%
+}
+\newcommand{\differential}[1]{\mathop{}\!#1}
+\newcommand\newderivative[2]{
+ \NewDocumentCommand{#1}{somse{^}}{%
+ \IfBooleanTF{##4}{%
+ \IfBooleanTF{##1}{\nicefrac}{\frac}%
+ }{%
+ \IfBooleanTF{##1}{\flatfrac}{\dfrac}%
+ }{%
+ \differential#2\IfValueT{##5}{^{##5\!}}\IfValueT{##2}{##2}%
+ }{%
+ \differential#2{##3}\IfValueT{##5}{^{##5}}%
+ }%
+ }
+}
+\newcommand\newpartialderivative[2]{
+ \NewDocumentCommand{#1}{somsE{^}{1}oE{^}{1}oE{^}{1}}{%
+ \def\hep at one{\IfValueTF{##6}{##7}{0}}
+ \def\hep at two{\IfValueTF{##8}{##9}{0}}
+ \def\hep at sum{\the\numexpr##5+\hep at one+\hep at two\relax}
+ \IfBooleanTF{##4}{%
+ \IfBooleanTF{##1}{\nicefrac}{\frac}%
+ }{%
+ \IfBooleanTF{##1}{\flatfrac}{\dfrac}%
+ }{%
+ \differential#2\ifnum\hep at sum=1\relax\else{^{\hep at sum\!}}\fi
+ \IfValueT{##2}{##2}%
+ }{%
+ \differential#2{##3}\ifnum##5=1\relax\else{^{##5}}\fi%
+ \IfValueT{##6}{#2##6\ifnum##7=1\relax\else{^{##7}}\fi}%
+ \IfValueT{##8}{#2##8\ifnum##9=1\relax\else{^{##9}}\fi}%
+ }%
+ }
+}
+\providecommand{\diffsymbol}{d}
+\newcommand{\diff}{\differential\diffsymbol}
+\AtBeginDocument{\mathdef{\d}{\diff}}
+\newderivative{\derivative}{\diffsymbol}
+\newcommand\dv{\derivative}
+\newcommand\partialdifferential{\differential\partial}
+\newcommand\pd{\partialdifferential}
+\newpartialderivative{\partialderivative}{\partial}
+\newcommand\pdv{\partialderivative}
+\providecommand{\gaugediffsymbol}{D}
+\newcommand{\gaugediff}{\differential\gaugediffsymbol}
+\newcommand{\D}{\gaugediff}
+\newcommand{\covariantdiff}{\differential\nabla}
+\newcommand{\cd}{\covariantdiff}
+\newcommand\variation{\differential\delta}
+\newcommand\var{\variation}
+\newpartialderivative{\functionalderivative}{\delta}
+\newcommand\fdv{\functionalderivative}
+\RequirePackage{cancel}
+\RequirePackage{slashed}
+\declareslashed{}{/}{.06}{0}{\D}
+\declareslashed{}{/}{.055}{0}{\pd}
+\RequirePackage{mleftright}
+\mleftright
+\newcommand{\noargumentsymbol}{\:\cdot\:}
+\newcommand{\optionalargument}[1]{\ifblank{#1}{\noargumentsymbol}{#1}}
+\DeclarePairedDelimiterX\abs[1]\lvert\rvert{\optionalargument{#1}}
+\DeclarePairedDelimiterX\hep at norm[1]\lVert\rVert{\optionalargument{#1}}
+\DeclarePairedDelimiterXPP\hep at pnorm[2]{}\lVert\rVert{_{#1}}{#2}
+\NewDocumentCommand{\norm}{som}{%
+ \IfValueTF{#2}{%
+ \IfBooleanTF{#1}{\hep at pnorm*}{\hep at pnorm}{#2}%
+ }{%
+ \IfBooleanTF{#1}{\hep at norm*}{\hep at norm}%
+ }{\optionalargument{#3}}%
+}
+
+\providecommand{\ordersymbol}{\mathcal{O}}
+\DeclarePairedDelimiterXPP\order[1]{\ordersymbol}(){}{#1}
+
+\DeclarePairedDelimiter{\hep at evaluated}{.}{\rvert}
+\NewDocumentCommand{\evaluated}{som}{%
+ \IfBooleanTF{#1}{%
+ \hep at evaluated*{#3}%
+ }{%
+ \IfNoValueTF{#2}{#3\rvert}{\hep at evaluated[#2]{#3}}%
+ }%
+}
+\newcommand\eval{\evaluated}
+
+\newcommand*{\rowseperator}{,\,}
+\ExplSyntaxOn
+\newcommand*{\hep at row}[1]{
+ \seq_set_split:Nnn\hep at seq{,}{#1}
+ \begin{matrix}\seq_use:Nn\hep at seq{\rowseperator}\end{matrix}
+}
+\newcommand*{\hep at column}[1]{%
+ \seq_set_split:Nnn\hep at seq{,}{#1}%
+ \begin{matrix}\seq_use:Nn\hep at seq{\\}\end{matrix}%
+}
+\ExplSyntaxOff
+\DeclarePairedDelimiterX{\row}[1]{(}{)}{\hep at row{#1}}
+\NewDocumentCommand{\column}{me{^}e{_}}{%
+ \left(\hep at column{#1}\right)\IfValueT{#2}{^{\!\!\!#2}}\IfValueT{#3}{_{\!\!\!#3}}%
+}
+
+\newcommand\hep at left@delim{\mathopen{}}
+\providecommand{\midbar}[1][]{%
+ \nonscript\:#1\vert\allowbreak\nonscript\:\hep at left@delim%
+}
+
+\providecommand\suchthat{\midbar}
+\DeclarePairedDelimiterX\set[1]\{\}{%
+ \renewcommand\suchthat{\midbar[\delimsize]}#1%
+}
+
+\providecommand{\probabilitysymbol}{\operatorname{Pr}}
+\providecommand\given{\midbar}
+\DeclarePairedDelimiterXPP\hep at Pr[1]{%
+ \probabilitysymbol}(){}{%
+ \renewcommand\given{\midbar[\delimsize]}#1%
+}
+\let\Pr\relax
+\NewDocumentCommand{\Pr}{so}{%
+ \IfValueTF{#2}{%
+ \IfBooleanTF{#1}{\hep at Pr*}{\hep at Pr}{#2}%
+ }{%
+ \probabilitysymbol%
+ }%
+}
+
+\NewDocumentCommand{\newpair}{mmme{_}e{^}}{%
+ \IfNoValueTF{#4}{%
+ \IfNoValueTF{#5}{%
+ \DeclarePairedDelimiterX{#1}[2]{#2}{#3}%
+ }{%
+ \DeclarePairedDelimiterXPP{#1}[2]{}{#2}{#3}{^{#5}}%
+ }%
+ }{%
+ \DeclarePairedDelimiterXPP{#1}[2]{}{#2}{#3}{_{#4}}%
+ }{%
+ \optionalargument{##1},\optionalargument{##2}%
+ }%
+}
+\newpair\innerproduct\langle\rangle
+\newpair\poissonbracket\lbrace\rbrace
+\newpair\commutator\lbrack\rbrack
+\newcommand\pb{\poissonbracket}
+\newcommand\comm{\commutator}
+\newcommand\acomm{\poissonbracket}
+\providecommand\braketspace{\mskip1mu}
+\newcommand\hep at midvert{%
+ \braketspace\delimsize\vert\braketspace\hep at left@delim%
+}
+\DeclarePairedDelimiterX\braket[2]{\langle}{\rangle}{%
+ \braketspace#1\hep at midvert#2\braketspace%
+}
+
+\DeclarePairedDelimiterXPP\hep at bra[1]{%
+ }{\langle}{\rvert}{\braketspace}{\braketspace#1\braketspace%
+}
+\NewDocumentCommand{\bra}{smt\ket sgt\ketbra sgg}{%
+ \IfBooleanTF{#6}{%
+ \IfBooleanTF{#1}{\braket*{#2}{#8}}{\braket{#2}{#8}}%
+ \IfBooleanTF{#7}{\bra*{#9}}{\bra{#9}}%
+ }{
+ \IfBooleanTF{#3}{%
+ \IfBooleanTF{#1}{\braket*}{%
+ \IfBooleanTF{#4}{\braket*}{\braket}}{#2}{#5%
+ }%
+ }{%
+ \IfBooleanTF{#1}{\hep at bra*}{\hep at bra}{#2}%
+ }%
+ }%
+}
+
+\DeclarePairedDelimiterXPP\ket[1]{%
+ \braketspace}{\lvert}{\rangle}{%
+}{%
+ \braketspace\hep at left@delim#1\braketspace%
+}
+
+\NewDocumentCommand{\ketbra}{smm}{%
+ \IfBooleanTF{#1}{%
+ \ket*{#2}\bra*{#3}%
+ }{%
+ \ket{#2}\bra{#3}%
+ }%
+}
+
+\DeclarePairedDelimiterX\matrixelement[3]{%
+ \langle}{\rangle
+}{%
+ \braketspace#1\hep at midvert#2\hep at midvert#3\braketspace%
+}
+\newcommand\matrixel{\matrixelement}
+\newcommand\mel{\matrixelement}
+
+\DeclarePairedDelimiterX\hep at expvalue[1]{\langle}{\rangle}{%
+ \braketspace#1\braketspace%
+}
+\NewDocumentCommand{\expectationvalue}{som}{%
+ \IfNoValueTF{#2}{%
+ \IfBooleanTF{#1}{\hep at expvalue*}{\hep at expvalue}{#3}%
+ }{%
+ \IfBooleanTF{#1}{\matrixelement*}{\matrixelement}{#2}{#3}{#2}%
+ }%
+}
+\newcommand\ev{\expectationvalue}
+\newcommand\vev[1]{\expectationvalue[0]{#1}}
+
+\endinput
+%%
+%% End of file `hep-math.sty'.
Property changes on: trunk/Master/texmf-dist/tex/latex/hep-math/hep-math.sty
___________________________________________________________________
Added: svn:eol-style
## -0,0 +1 ##
+native
\ No newline at end of property
Modified: trunk/Master/tlpkg/bin/tlpkg-ctan-check
===================================================================
--- trunk/Master/tlpkg/bin/tlpkg-ctan-check 2021-11-27 21:22:55 UTC (rev 61169)
+++ trunk/Master/tlpkg/bin/tlpkg-ctan-check 2021-11-27 21:23:37 UTC (rev 61170)
@@ -384,7 +384,7 @@
harvard harveyballs harvmac hatching hausarbeit-jura havannah
hc he-she hecthese helmholtz-ellis-ji-notation helvetic
hep hep-acronym hep-bibliography hep-float hep-font hep-float
- hep-math-font hep-paper hepnames
+ hep-math hep-math-font hep-paper hepnames
hepparticles hepthesis hepunits here heuristica hexgame
hf-tikz hfbright hfoldsty
hhtensor highlightlatex hindawi-latex-template hindmadurai
Added: trunk/Master/tlpkg/tlpsrc/hep-math.tlpsrc
===================================================================
More information about the tex-live-commits
mailing list.