texlive[54222] Master/texmf-dist/tex/generic/genmisc: remove these
commits+karl at tug.org
commits+karl at tug.org
Tue Mar 10 17:50:57 CET 2020
Revision: 54222
http://tug.org/svn/texlive?view=revision&revision=54222
Author: karl
Date: 2020-03-10 17:50:57 +0100 (Tue, 10 Mar 2020)
Log Message:
-----------
remove these genmisc files, noinfo license
Removed Paths:
-------------
trunk/Master/texmf-dist/tex/generic/genmisc/cropmark.sty
trunk/Master/texmf-dist/tex/generic/genmisc/cropmark.tex
trunk/Master/texmf-dist/tex/generic/genmisc/croptest.tex
trunk/Master/texmf-dist/tex/generic/genmisc/dayofweek.tex
trunk/Master/texmf-dist/tex/generic/genmisc/daytime.sty
trunk/Master/texmf-dist/tex/generic/genmisc/default.sty
trunk/Master/texmf-dist/tex/generic/genmisc/dow.tex
trunk/Master/texmf-dist/tex/generic/genmisc/emtrees.tex
trunk/Master/texmf-dist/tex/generic/genmisc/endnote.tex
trunk/Master/texmf-dist/tex/generic/genmisc/fakebold.tex
trunk/Master/texmf-dist/tex/generic/genmisc/hep.tex
trunk/Master/texmf-dist/tex/generic/genmisc/inscrutable.tex
Deleted: trunk/Master/texmf-dist/tex/generic/genmisc/cropmark.sty
===================================================================
--- trunk/Master/texmf-dist/tex/generic/genmisc/cropmark.sty 2020-03-10 16:46:34 UTC (rev 54221)
+++ trunk/Master/texmf-dist/tex/generic/genmisc/cropmark.sty 2020-03-10 16:50:57 UTC (rev 54222)
@@ -1,94 +0,0 @@
-%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
-%
-% Cropmark.tex
-% version 1.0
-%
-% This will put crop marks on everythings that's \shipout'ed.
-% It will work with any format, since it relies on redefinition
-% of \shipout. Exception: if you declare \output{} you will
-% not get crop marks.
-%
-% Cut along the center of the rules to get exactly the shipped
-% out box. To get padding around this box, use the parameters below.
-%
-% User adjustable parameters:
-% \croplength length of the crop rules
-% \cropwidth width of the crop rules
-% \cropsep separation between rule and page box
-% \croppadtop padding in case page box looks bigger than it is
-% \croppadbot (for instance with plain TeX head/footline)
-% \croppadlr
-%
-% Date: 17 March 1992
-%
-% Author:
-% Victor Eijkhout
-% Department of Computer Science
-% University Tennessee at Knoxville
-% 104 Ayres Hall
-% Knoxville, TN 37996
-% USA
-%
-% eijkhout at cs.utk.edu
-%
-%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
-% save the old \shipout command
-\let\xshipout\shipout
-
-% define a new one: investigate what's being shipped
-\def\shipout{\futurelet\SomeBox\yshipout}
-
-% if its a box register, do postprocessing with \afterassignment,
-% otherwise do \afterassignment which will do \aftergroup
-\def\yshipout
- {\ifx\SomeBox\box \let\next\shipAfterRegister
- \else \ifx\SomeBox\copy \let\next\shipAfterRegister
- \else \let\next\shipAfterBox \fi\fi
- \afterassignment\next\setbox0=
- }
-\def\shipAfterBox{\aftergroup\shipAfterRegister}
-
-% now we have whatever is being shipped in box0,
-% so we can insert crop marks
-\newdimen\croplength \croplength=20pt
-\newdimen\cropsep \cropsep=10pt
-\newdimen\cropwidth \cropwidth=2pt
-
-\newdimen\croppadtop \croppadtop=0pt
-\newdimen\croppadbot \croppadbot=0pt
-\newdimen\croppadlr \croppadlr=0pt
-
-\def\crophrule{\vrule height\cropwidth depth0pt width\croplength}
-\def\cropvrule{\vrule width\cropwidth depth0pt height\croplength}
-
-\def\shipAfterRegister
- {\setbox0\vbox
- {\offinterlineskip
- \dimen0\cropsep\advance\dimen0\croplength
- \setbox2\hbox to \wd0
- {\kern-\croppadlr\kern-.5\cropwidth
- \cropvrule\hfil\cropvrule
- \kern-.5\cropwidth\kern-\croppadlr}
- \setbox4\hbox to \wd0{\llap{\crophrule\kern\cropsep\kern\croppadlr}
- \hfil
- \rlap{\kern\croppadlr\kern\cropsep\crophrule}}
- % go a bit up, put vertical rules, put horizontal rules
- \kern-\dimen0
- \copy2
- \kern\cropsep\kern-.5\cropwidth
- \copy4
- \kern-.5\cropwidth
- % padding
- \kern\croppadtop
- % the box to be shipped
- \box0
- % padding
- \kern\croppadbot
- % and now the top in reverse
- \kern-.5\cropwidth
- \box4
- \kern-.5\cropwidth\kern\cropsep
- \box2
- }
- \xshipout\box0\relax}
-\endinput
Deleted: trunk/Master/texmf-dist/tex/generic/genmisc/cropmark.tex
===================================================================
--- trunk/Master/texmf-dist/tex/generic/genmisc/cropmark.tex 2020-03-10 16:46:34 UTC (rev 54221)
+++ trunk/Master/texmf-dist/tex/generic/genmisc/cropmark.tex 2020-03-10 16:50:57 UTC (rev 54222)
@@ -1,154 +0,0 @@
-%% Save file as: CROPMARK.TEX Source: FILESERV at SHSU.BITNET
-% Author: Peter Ungar <LAXA at ACFcluster.NYU.EDU>
-%
-% CROPMARK MACROS FOR PLAIN TEX. Feb. 10, 1992 01:31 Peter Ungar 914 723 7187
-% Cropmarks are markings on pages intended to be phototypeset. They mark the
-% corners of the intended book page.
-% THE DIMENSION SPECIFICATIONS (\paperheight,\paperwidth, \topmargin,
-% \outsidemargin, \hsize, \vsize) SHOULD COME BEFORE THE MACROS. OTHERWISE
-% THE CROPMARKS GO INTO ODD LOCATIONS. THESE QUANTITIES ARE ASSIGNED VALUES
-% IN THIS FILE TO MAKE THE EXAMPLE WORK. REPLACE THE GIVEN VALUES BY THE
-% ONES YOU NEED BEFORE INSTALLING THE MACROS. HSIZE IS THE LENGTH OF THE LINES
-% AND VSIZE IS THE HEIGHT OF THE PRINTED PAGE NOT COUNTING HEADER OR FOOTER.
-% \lefttopcropmark should be inserted at the beginning of the
-% headline. It is a \llap and should not take space away from any other item
-% in the headline. \righttopcropmark should be at the end of the headline.
-% If there is no \hfil in the headline, use one to put the cropmark to
-% the end of the headline. It is a \rlap and in theory it should not take
-% space away
-% from other items. Do not to put a space in front of \righttopcropmark be-
-% cause the space will be typeset unless it is preceded by a control sequence.
-% The bottom cropmarks should be inserted in the beginning and end of the
-% \footline. Be sure to fill space in the middle with \hfil.
-% Remember that the \footline definition has to come BEFORE the end of the
-% first page.
-% The values of \voffset and \hoffset can be adjusted to try to push the
-% entire page including the cutmarks into the area your printer can print.
-% The quantities you have to input are
-% \paperheight, \paperwidth, \topmargin (measured from the top of the headline
-% which is assumed to be 10-point size, and \outsidemargin which will be the
-% right margin of odd-numbered pages and the left margin of even numbered
-% pages. The other quantities which are needed are computed by the macros.
-% The computations two empirical corrections.
-% If the dimensions on your printout are slightly off, try over or under-
-% stating the true dimensions of the above quantities.
-% The macros ought to work for all values of \hsize and \vsize but if these
-% are too large the cropmarks may not fit the area most printers can print.
-% \nocropmarks replaces the cropmark macros by \relax (blanks). The cropmarks
-% are needed only for phototypesetting and we may not want to see them on
-% printout prepared for other purposes.
-% TEX WILL NOT LET YOU KNOW IF YOU DID NOT ASSIGN A VALUE TO A DIMENSION.
-% THAT MAY BE THE REASON IF YOU GET BIZARRE RESULTS. THE VALUES MUST COME
-% BEFORE THE MACROS.
-
-%\magnification 1042 %% Needed to get exact dimensions on the MacPlus screen.
-
-\voffset=20mm\hoffset=15mm % Needed to bring cropmarks within printable area.
-\overfullrule=0mm % To prevent overfullrules being added to cropmarks
-\newdimen\paperheight
-\newdimen\paperwidth
-\newdimen\topmargin
-\newdimen\outsidemargin
-\newdimen\insidemargin
-\newdimen\leftmargin
-\newdimen\rightmargin
-\newdimen\topliftadjustment
-\newdimen\bottomliftadjustment
-\newdimen\topcropmarklift
-\newdimen\bottomcropmarklift
-\newdimen\leftsideskip
-\newdimen\rightsideskip
-\newdimen\bclifta
-\newdimen\bcliftb
-
-\vsize=182mm
-\hsize=112mm
-\paperheight=227.4mm % These six quantities specify the margins.
-\paperwidth=152.3mm % The ones introduced below are either
-\topmargin=14mm % computed from these by the macros or they
-\outsidemargin=25mm % are auxiliary.
-
-\topliftadjustment=2.6mm
-\bottomliftadjustment=15.5mm
-\insidemargin=\paperwidth
-\advance\insidemargin by -\outsidemargin
-\advance\insidemargin by -\hsize
-
-\def\leftorright{\ifodd\pageno
-\leftmargin=\insidemargin\rightmargin=\outsidemargin\else
-\leftmargin=\outsidemargin\rightmargin=\insidemargin\fi
-\leftsideskip=\leftmargin
-\advance\leftsideskip by -4.05mm
-\rightsideskip=\rightmargin
-\advance\rightsideskip by -4.05mm}
-
-\def\lefttopcropmark{{\parindent=0mm\llap{\vtop{
-\hsize=\leftmargin
-\vskip-\topliftadjustment
-\vskip-\topmargin
-\vrule height 0.05mm depth 4mm width 0.05mm
-\vrule height 0.05mm depth0mm width 4mm
-\hfill}}}}
-\def\righttopcropmark{{\parindent=0mm\rlap{\vtop{\hsize=\rightmargin
-\vskip-\topliftadjustment
-\vskip-\topmargin
-\hfill
-\vrule height 0.05mm depth0mm width 4mm
-\vrule height 0.05mm depth 4mm width 0.05mm
-}}}}
-
-\bottomcropmarklift=-\paperheight
-\advance\bottomcropmarklift by\topmargin
-\advance\bottomcropmarklift by\vsize
-\advance\bottomcropmarklift by\bottomliftadjustment
-
-\bclifta=\bottomcropmarklift
-\advance\bclifta by 4mm
-\bcliftb=\bottomcropmarklift
-\advance\bcliftb by -0.05mm
-
-\def\leftbottomcropmark{{\parindent=0mm\llap{
-\hbox{\vrule height\bclifta depth -\bottomcropmarklift width 0.05mm
-\vrule height \bottomcropmarklift depth -\bcliftb width 4mm
-\hskip\leftsideskip}}}}
-
-\def\rightbottomcropmark{{\parindent=0mm\rlap{\hbox{\hskip\rightsideskip
-\vrule height \bottomcropmarklift depth -\bcliftb width 4mm
-\vrule height\bclifta depth -\bottomcropmarklift width 0.05mm}}}}
-
-
-\def\nocropmarks{\def\lefttopcropmark{\relax} % THIS TURNS OFF CROPMARKS
-\def\righttopcropmark{\relax}
-\def\leftbottomcropmark{\relax}
-\def\rightbottomcropmark{\relax}}
-\endinput
-
-% END OF THE MACROS. AN EXAMPLE FOLLOWS. COMMENT OUT \endinput TO
-% TYPESET IT.
-
-\headline={\leftorright\lefttopcropmark\ifodd\pageno
-\hfil HEADLINE\hfil\folio\else
-\folio\hfil HEADLINE\hfil \fi
-\righttopcropmark}
-\footline={\leftorright\leftbottomcropmark
-\hfil
-\rightbottomcropmark}
-
-\noindent Topliftadjustment=2.6mm bottomliftadjustment=15.5mm
-\hfill H
-
-\noindent paperheight=227.4mm paperwidth=152.3mm
-
-\noindent topmargin=14mm outsidemargin=25mm
-
-\noindent vsize=182mm hsize=112mm
-
-NOTE THAT THE DIMENSION SPECIFICATIONS MUST COME BEFORE THE MACROS.
-\vfill
-\noindent\line{Here is the bottom left corner. \hfil Bottom right is H}
-\eject
-\noindent\line{Here is the top left corner.\hfil Top right is H}
-\vfill
-\noindent\line{Here is the bottom left corner. \hfil Bottom right is H}
-\eject
-\end
Deleted: trunk/Master/texmf-dist/tex/generic/genmisc/croptest.tex
===================================================================
--- trunk/Master/texmf-dist/tex/generic/genmisc/croptest.tex 2020-03-10 16:46:34 UTC (rev 54221)
+++ trunk/Master/texmf-dist/tex/generic/genmisc/croptest.tex 2020-03-10 16:50:57 UTC (rev 54222)
@@ -1,44 +0,0 @@
-% An illustration of cropmark.sty by Victor Eijkhout.
-% This file belongs to cropmark.sty version 1.0 or later,
-% it is both plain TeX and LaTeX compatible.
-
-\def\plainname{plain}
-\ifx\fmtname\plainname
- \input cropmark.sty
-\else
- \documentstyle[cropmark]{article}
- \begin{document}
-\fi
-
-\parindent=0pt
-\def\page
-{Left\hfill toP
-\vfill
-Bottom\hfill righT
-\eject}
-
-% First illustrate the default settings
-
-\page
-
-% Now stretch a bit (this is necessary for LaTeX)
-
-\ifx\plainname\fmtname
- \advance\croppadtop by 5pt
- \advance\croppadbot by 5pt
- \advance\croppadlr by 2pt
-\else
- \addtolength{\croppadtop}{-10pt}
- \addtolength{\croppadbot}{15pt}
- \addtolength{\croppadlr}{15pt}
-\fi
-
-\page
-
-\edef\byebye{
-\if\fmtname\plainname
- \noexpand\csname bye\noexpand\endcsname
-\else
- \noexpand\end{document}
-\fi}
-\byebye
\ No newline at end of file
Deleted: trunk/Master/texmf-dist/tex/generic/genmisc/dayofweek.tex
===================================================================
--- trunk/Master/texmf-dist/tex/generic/genmisc/dayofweek.tex 2020-03-10 16:46:34 UTC (rev 54221)
+++ trunk/Master/texmf-dist/tex/generic/genmisc/dayofweek.tex 2020-03-10 16:50:57 UTC (rev 54222)
@@ -1,149 +0,0 @@
-%
-% \DayOfWeek expands to the day of the week ("Sunday", etc.)
-% \PhaseOfMoon expands to the phase of the moon
-%
-% Written by Martin Minow of DEC (minow%bolt.dec at decwrl.dec.com).
-%
-\def\DayOfWeek{%
-%
-% Calculate day of the week, return "Sunday", etc.
-%
- \newcount\dow % Gets day of the week
- \newcount\leap % Leap year fingaler
- \newcount\x % Temp register
- \newcount\y % Another temp register
-% leap = year + (month - 14)/12;
- \leap=\month \advance\leap by -14 \divide\leap by 12
- \advance\leap by \year
-% dow = (13 * (month + 10 - (month + 10)/13*12) - 1)/5
- \dow=\month \advance\dow by 10
- \y=\dow \divide\y by 13 \multiply\y by 12
- \advance\dow by -\y \multiply\dow by 13 \advance\dow by -1 \divide\dow by 5
-% dow += day + 77 + 5 * (leap % 100)/4
- \advance\dow by \day \advance\dow by 77
- \x=\leap \y=\x \divide\y by 100 \multiply\y by 100 \advance\x by -\y
- \multiply\x by 5 \divide\x by 4 \advance\dow by \x
-% dow += leap / 400
- \x=\leap \divide\x by 400 \advance\dow by \x
-% dow -= leap / 100 * 2;
-% dow = (dow % 7)
- \x=\leap \divide\x by 100 \multiply\x by 2 \advance\dow by -\x
- \x=\dow \divide\x by 7 \multiply\x by 7 \advance\dow by -\x
- \ifcase\dow Sunday\or Monday\or Tuesday\or Wednesday\or
- Thursday\or Friday\or Saturday\fi
-}
-%%
-%%
-%%
-\def\PhaseOfMoon{% Calculate the phase of the (civil) moon.
-%
-% The routine calculates the year's epact (the age of the moon on Jan 1.),
-% adds this to the number of days in the year, and calculates the phase
-% of the moon for this date. It returns the phase as a string, e.g.,
-% "new", "full", etc.
-%
-% In the algorithm:
-%
-% diy Is the day of the year - 1 (i.e., Jan 1 is day 0).
-%
-% golden Is the number of the year in the Mentonic cycle, used to
-% determine the position of the calender moon.
-%
-% epact Is the age of the calender moon (in days) at the beginning
-% of the year. To calculate epact, two century-based
-% corrections are applied:
-% Gregorian: (3 * cent)/4 - 12
-% is the number of years such as 1700, 1800 when
-% leap year was not held.
-% Clavian: (((8 * cent) + 5) / 25) - 5
-% is a correction to the Mentonic cycle of about
-% 8 days every 2500 years. Note that this will
-% overflow 16 bits in the year 409600. Beware.
-%
-% The algorithm is accurate for the Gregorian calender only.
-%
-% The magic numbers used in the phase calculation are as follows:
-% 29.5 The moon's period in days.
-% 177 29.5 scaled by 6
-% 22 (29.5 / 8) scaled by 6 (this gets the phase)
-% 11 ((29.5 / 8) / 2) scaled by 6
-%
-% Theoretically, this should yield a number in the range 0 .. 7. However,
-% two days per year, things don't work out too well.
-%
-% Epact is calculated by the algorithm given in Knuth vol. 1 (calculation
-% of Easter). See also the article on Calenders in the Encyclopaedia
-% Britannica and Knuth's algorithm in CACM April 1962, page 209.
-%
- \newcount\cent % Century number (1979 == 20)
- \newcount\epact % Age of the moon on Jan. 1
- \newcount\diy % Day in the year
- \newcount\golden % Moon's golden number
- \newcount\x % Temp
- \newcount\m % Temp for modulus
- \diy=\day \advance\diy by \ifcase\month % Jan 1 == 0
- -1\or -1\or 30\or 58\or 89\or 119\or 150\or % Jan .. Jun
- 180\or 211\or 241\or 272\or 303\or 333\fi % Jul .. Dec
-% if ((month > 2) && ((year % 4 == 0) &&
-% ((year % 400 == 0) || (year % 100 != 0))))
-% diy++; /* Leapyear fixup */
- \ifnum \month>2
- \x=\year \m=\x \divide\m by 4 \multiply\m by 4 \advance\x by -\m
- \ifnum \x=0 % month > 2 and maybe leapyear
- \x=\year \m=\x \divide\m by 400 \multiply\m by 400 \advance\x by -\m
- \ifnum \x=0 % 2000 is a leap year
- \advance\diy by 1 % so it's one day later
- \else % not 2000, check other '00's
- \x=\year \m=\x \divide\m by 100 \multiply\m by 100 \advance\x by -\m
- \ifnum \x>0 % not some other '00' year
- \advance\diy by 1 % it's still one day later
- \fi % not odd century
- \fi % not 2000-type century
- \fi % not leapish year
- \fi % not march or later
-% cent = (year / 100) + 1; /* Century number */
-% golden = (year % 19) + 1; /* Golden number */
- \cent=\year \divide\cent by 100 \advance\cent by 1
- \golden=\year
- \m=\year \divide\m by 19 \multiply\m by 19 \advance\golden by -\m
- \advance\golden by 1
-% epact = ((11 * golden) + 20 /* Golden number */
-% + (((8 * cent) + 5) / 25) - 5 /* 400 year cycle */
-% - (((3 * cent) / 4) - 12)) % 30;/* Leap year correction */
- \epact=11 \multiply\epact by \golden
- \advance\epact by 20
- \x=8 \multiply\x by \cent \advance\x by 5
- \divide\x by 25 \advance\x by -5
- \advance\epact by \x
- \x=3 \multiply\x by \cent \divide\x by 4 \advance\x by -12
- \advance\epact by -\x
- \m=\epact \divide\m by 30 \multiply\m by 30 \advance\epact by -\m
-% if (epact <= 0)
-% epact += 30; /* Age range is 1 .. 30 */
-% if ((epact == 25 && golden > 11) || epact == 24)
-% epact++;
- \ifnum \epact<0
- \advance\epact by 30
- \fi
- \ifnum \epact=25
- \ifnum \golden>11
- \advance \epact by 1
- \fi
- \else
- \ifnum \epact=24
- \advance \epact by 1
- \fi
- \fi
-%
-% Calculate the phase, using the magic numbers defined above.
-% Note that phase may be equal to 8 (== 0) on two days of the year
-% due to the way the algorithm was implemented.
-% phase = (((((diy + epact) * 6) + 11) % 177) / 22) & 7;
-%
- \x=\diy \advance\x by \epact \multiply\x by 6 \advance\x by 11
- \m=\x \divide\m by 177 \multiply\m by 177 \advance\x by -\m
- \divide\x by 22
- \ifcase\x new\or waxing crescent\or in its first quarter\or
- waxing gibbous\or full\or waning gibbous\or
- in its last quarter\or waning crescent\or new\fi
-}
Deleted: trunk/Master/texmf-dist/tex/generic/genmisc/daytime.sty
===================================================================
--- trunk/Master/texmf-dist/tex/generic/genmisc/daytime.sty 2020-03-10 16:46:34 UTC (rev 54221)
+++ trunk/Master/texmf-dist/tex/generic/genmisc/daytime.sty 2020-03-10 16:50:57 UTC (rev 54222)
@@ -1,30 +0,0 @@
-%% Save file as: DAYTIME.STY Source: FILESERV at SHSU.BITNET
-%% Source: INFO-TeX at SHSU.edu (Wed, 2 Oct 1991 10:01:43 EDT)
-%% Author: Mauro Orlandini <ORLANDINI at HEAVAX.GSFC.NASA.GOV>
-%% Modified: George D. Greenwade <bed_gdg at SHSU.edu> -- added \Daytime
-%% to not have the leading 0 on 1:00 --- 9:00
-\begingroup
- \count0=\time
- \count1=\count0
- \divide\count0 by 60
- \count2=\count0
- \multiply\count0 by 60
- \advance\count1 by -\count0
- \ifnum\count2>11
- \ifnum\count2>12 \advance\count2 by -12\fi
- \def\ampm{pm}%
- \else
- \ifnum\count2=0 \advance\count2 by 12\fi
- \def\ampm{am}%
- \fi
- \xdef\daytime{%
- \ifnum\count2<10 0\fi \the\count2:%
- \ifnum\count1<10 0\fi \the\count1
- \ampm
- }%
- \xdef\Daytime{% %GDG
- \the\count2:% %GDG
- \ifnum\count1<10 0\fi \the\count1 %GDG
- \ampm %GDG
- }% %GDG
-\endgroup
Deleted: trunk/Master/texmf-dist/tex/generic/genmisc/default.sty
===================================================================
--- trunk/Master/texmf-dist/tex/generic/genmisc/default.sty 2020-03-10 16:46:34 UTC (rev 54221)
+++ trunk/Master/texmf-dist/tex/generic/genmisc/default.sty 2020-03-10 16:50:57 UTC (rev 54222)
@@ -1,311 +0,0 @@
-% DEFAULT.STY, version 1.3 July 1998, provides
-% 1. macro parameter-defaulting mechanism.
-% 2. user stack and dynamic array
-% Particularly useful if you have macros with many parameters, and you
-% don't want to remember all of them all the time.
-%
-% Author: Zhuhan Jiang, University of New England, Australia
-% Email: zhuhan at neumann.une.edu.au
-%
-% NOTES:
-% 1. This style file can be loaded in as many times as you want,
-% without overrunning the resources for such as counter
-% registers and etc. So different packages may all use it to
-% default their macro parameters, without causing any conflict.
-% 2. Macro parameters that can be defaulted through this style file
-% are those included in square brackets. E.g. #1, #2, #3 in
-% \foo[#1][#2][#3]#4#5 are defaultable while #4 and #5 here are
-% not.
-% 3. If \foo is a macro to be defaulted, the original macro \foo
-% will be renamed as ``\foo@ raw'' (yes, there is a space) and
-% the new macro \foo will be defined through the use of the
-% original ``\foo@ raw''.
-%
-% MAIN MACRO:
-% \setdefalut{cmdname}{n}{default1}{..}{default_n}
-% - gives defaults to \cmdname[p_1][p_2]..[p_n]
-% (the macro to be defaulted must be already defined
-% when \setdefault is executed)
-% EXAMPLES:
-% 1. Suppose \foo is defined for \foo[#1][#2][#3]{#4}, we may default
-% all (or some of) the parameters in the SQUARE BRACKETS to for
-% instance 'one', 'two' and 'three' via
-% \setdefault{foo}{3}{one}{two}{three}
-% This way, command \foo{stuff} or \foo[]{stuff} or \foo[][]{stuff}
-% or \foo[][][]{stuff} will all be translated as
-% \foo[one][two][three]{stuff}. Command \foo[][2]{stuff} will be
-% translated as \foo[one][2][three]{stuff}.
-% 2. See how \placebox is defined and redefined via \setdefault
-% in this file.
-%
-% TIP:
-% The best strategy to define (e.g.) \foo[#1][#2]{#3} so that
-% it has defaults for #1 and #2
-% 1. define \foo@[#1][#2]#3 as normal (what you wish)
-% 2. define \foo[#1][#2]#{\foo@[#1][#2]} to make {#3} mandatory
-% 3. use \setdefault{foo}{2}{one}{two} to default #1=one and #2 to two
-%
-% MINOR MACROS:
-% \placebox[#1][#2][#3][#4][#5][#6]{#7}
-% - place stuff #7 in a box at the position specified
-% by parameters #1, ..., #6. (move mini page around)
-% #1: box position (default 0)
-% 1--6--2 <-- top of the box
-% | |
-% | |
-% | |
-% 9 5 7 0 is -5 <-- middle height of the box
-% | |
-% 10 11 12 <-height up <-- baseline
-% | | depth down
-% 4--8--3 <-- bottom of the box
-% #1<=0: box has no width, no height
-% #2: x shift (default 0pt)
-% #3: y shift (default 0pt)
-% #4,#5: extra x,y shift in multiple of box width/10, height/10
-% #6: box type: v=vbox, otherwise=hbox
-% #7: content to be boxed
-% \push{ ... } - push stuff to stack; anything can be saved to
-% \pop - pop stack
-% \popnil - delete stack top element (pop to nil)
-% \fetch{#1} - fetch #1-th entry from the stack
-% (illegal number #1 will produce \relax)
-% if #1>0, fetch #1-th entry from bottom of stack
-% if #1>=0, fetch (-#1)-th element from top of stack
-% e.g.
-% fetch{0} - fetch the element of the top of stack
-% fetch{-1} - the element just below the top of stack
-% fetch{2} - 2nd element from the bottom of stack
-%
-\ifx\EntryDefault\undefined
- \message{1.3 13/7/98}%
- {\catcode`\@=11\relax \def\temp at macro{\space\space\space\space}%
- \wlog{\temp at macro DEFAULT.STY version 1.3 July 1998 By Z Jiang}%
- \wlog{\temp at macro University of New England, Australia}%
- \wlog{\temp at macro Email: zhuhan at neumann.une.edu.au}}%
-\fi
-\xdef\EntryDefault{\the\catcode`\@}\catcode`\@=11\relax % SAVE @'s STATUS
-%
-%
-% NEW MEASURES etc (parameter defaulting mechanism given by macros below)
-\def\new at measures{%
- \def\temp@@macro##1##2##3{\expandafter\ifx\csname ##3temp##2##1\endcsname
- \relax\edef\next{\noexpand\csname new##1\noexpand\endcsname
- \csname ##3temp##2##1\endcsname}%
- \else\let\next\relax\fi\next}%
- \def\temp at macro##1{%
- \temp@@macro{##1}{@}{}\temp@@macro{##1}{@@}{}\temp@@macro{##1}{@@@}{}}%
- \temp at macro{count}\temp at macro{toks}\temp at macro{box}\temp at macro{read}%
- \temp@@macro{if}{@}{if}\temp@@macro{if}{@@}{if}\temp@@macro{if}{@@@}{if}%
- \def\temp@@macro##1{\expandafter\ifx\csname temp##1dim\endcsname
- \relax\edef\next{\noexpand\csname newdimen\noexpand\endcsname
- \csname temp##1dim\endcsname}%
- \else\let\next\relax\fi\next}%
- \temp@@macro{@}\temp@@macro{@@}\temp@@macro{@@@}%
-}%
-\let\temp@@@macro=\wlog\def\wlog#1{}\new at measures
-%
-%%% GENERAL STACK
-\def\make at STKcount{\csname newcount\endcsname
- \STKcount\global\STKcount=0\relax}%
-\ifx\STKcount\undefined@
- \def\next{\make at STKcount}\else\def\next{}\fi
-\next % ensures stack pointer not flushed if this piece of code
- % is loaded again
-%
-\long\def\push#1{\global\advance\STKcount1\relax
-\expandafter\gdef\csname STK\the\STKcount\string~\endcsname{#1}}%
-%
-\def\popnil{\expandafter\let\expandafter\temp at macro
- \csname STK\the\STKcount\string~\endcsname
- \ifnum\STKcount>0\global\expandafter\let
- \csname STK\the\STKcount\string~\endcsname=\undefined@
- \global\advance\STKcount-1%
- \else
- \def\temp at macro{}\global\STKcount=0%
- \fi\relax % \temp at macro for pop
-}%
-%
-\def\pop{\popnil\temp at macro}%
-%
-\def\fetch@#1{\ifnum#1>0 \relax \temp at count=#1 \else
- \temp at count=\STKcount \advance\temp at count by #1 \fi
- \csname STK\the\temp at count\string~\endcsname
-}%
-\def\fetch#{\fetch@}%
-%
-%% GET PARAMETERS
-\long\def\get at nepara[#1][#2]{{\def\next@{#2}%
-\ifx\next@\empty\push{#1}\else\push{#2}\fi}\ag at in}%
-%
-\long\def\get at para\left@#1\right@{%
-\def\check@{%
- \ifx[\next@ \def\full@####1{\get at nepara[#1]####1}%
- \else \def\full@{\get at nepara[#1][#1]}\fi
- \full@}%
-\futurelet\next@\check@}%
-%
-\long\def\do at nepara\left@#1\right@#2\p at r@end{%
-\gdef\p at r@data{#2}\global\advance\p at r@count1\get at para\left@#1\right@}%
-%
-\def\ag at in{\ifx\p at r@data\empty \def\next@{\relax
-\getp at r@s\run at CMD}\else
-\def\next@{\expandafter\do at nepara\p at r@data\p at r@end}\fi
-\next@}%
-%
-\def\run at CMD{\csname STK\the\STKcount\string~\endcsname}%
-%
-\def\num at to@word#1{\ifcase #1 \or
- \def\temp at macro{one}\or \def\temp at macro{two}\or
- \def\temp at macro{three}\or \def\temp at macro{four}\or
- \def\temp at macro{five}\or \def\temp at macro{six}\or
- \def\temp at macro{seven}\or \def\temp at macro{eight}\or
- \def\temp at macro{nine}\else \def\temp at macro{}\fi
-\temp at toks=\expandafter{\temp at macro}}%
-%
-\temp@@count=1 % make nine newtoks, if they don't already exist
-\loop \num at to@word{\temp@@count}%
- \expandafter\ifx\csname p at r@\the\temp at toks\endcsname\relax
- \temp@@toks={newtoks}\expandafter\csname\expandafter\the
- \expandafter\temp@@toks\expandafter\endcsname
- \csname p at r@\the\temp at toks\endcsname\fi
- \advance\temp@@count by 1 \ifnum\temp@@count<10 \repeat
-%
-\ifx\p at r@count\undefined@ \csname newcount\endcsname\p at r@count\fi
-\long\def\st at ckparas#1\p at r@end{%
-\global\p at r@count=0\gdef\p at r@data{#1}\ag at in}%
-%
-% PARAMETER ASSIGNMENT % use \temp at count
-\def\getp at r@s{\temp at count=\p at r@count
-{\loop
- \ifnum\temp at count>0 %
- \expandafter\let\expandafter
- \temp at macro\csname STK\the\STKcount\string~\endcsname
- \ifcase\temp at count
- \or \global\p at r@one=\expandafter{\temp at macro}%
- \or \global\p at r@two=\expandafter{\temp at macro}%
- \or \global\p at r@three=\expandafter{\temp at macro}%
- \or \global\p at r@four=\expandafter{\temp at macro}%
- \or \global\p at r@five=\expandafter{\temp at macro}%
- \or \global\p at r@six=\expandafter{\temp at macro}%
- \or \global\p at r@seven=\expandafter{\temp at macro}%
- \or \global\p at r@eight=\expandafter{\temp at macro}%
- \or \global\p at r@nine=\expandafter{\temp at macro}%
- \else \errmessage{Parameter capacity exceeded.}%
- % this should never happen: TeX's max para no. is 9
- \fi
- \global\expandafter\let
- \csname STK\the\STKcount\string~\endcsname=\undefined@%
- \global\advance\STKcount-1%
- \global\advance\temp at count-1\relax
- \fi
- \ifnum\temp at count>0 %
-\repeat}}%
-%
-\def\clrp at r@s{%GLOBALLY clear
-\global\p at r@one={}\global\p at r@two={}\global\p at r@three={}%
-\global\p at r@four={}\global\p at r@five={}\global\p at r@six={}%
-\global\p at r@seven={}\global\p at r@eight={}\global\p at r@nine={}}%
-%
-\def\read at paras#1{\temp@@@count=1 %use \temp@@@count and \temp@@count
- \loop \num at to@word{\the\temp@@@count}\csname p at r@\the\temp at toks\endcsname={}%
- \advance\temp@@@count by 1 \ifnum\temp@@@count<10 \repeat
- \temp@@@count=1 \temp@@count=#1 %
- \def\read at one@para##1{\num at to@word{\temp@@@count}%
- \def\temp at macro{\left@ ##1\right@}%
- \temp@@@toks=\expandafter{\temp at macro}%
- \csname p at r@\the\temp at toks\endcsname\expandafter{\temp at macro}%
- \advance\temp@@@count by 1 \read at continue}%
- \def\read at continue{\num at to@word{\temp@@@count}% which uses \temp at macro
- \ifnum\temp@@@count>\temp@@count \let\next@@\make at default
- \edef\temp@@macro{\the\p at r@one\the\p at r@two\the\p at r@three\the\p at r@four
- \the\p at r@five\the\p at r@six\the\p at r@seven\the\p at r@eight\the\p at r@nine}%
- \else \let\next@@\read at one@para
- \fi \next@@}\read at continue}%
-%
-\def\make@@default#1#2{\temp at count=#2\relax \temp@@count=1 %used \temp@@macro
- \loop \num at to@word{\temp@@count}%
- \ifnum\temp@@count>\temp at count \csname p at r@\the\temp at toks\endcsname={}%
- \else \csname p at r@\the\temp at toks\endcsname
- =\expandafter{\expandafter[\expandafter
- \the\csname p at r@\the\temp at toks\endcsname]}\fi
- \advance\temp@@count by 1 %
- \ifnum\temp@@count<10 \repeat
- \edef\temp at macro{\the\p at r@one\the\p at r@two\the\p at r@three\the\p at r@four
- \the\p at r@five\the\p at r@six\the\p at r@seven\the\p at r@eight\the\p at r@nine}%
- \temp at toks=\expandafter{\temp at macro}%
- \temp@@toks=\expandafter{\temp@@macro}%
- \expandafter\let\expandafter\temp at macro\csname #1\endcsname
- \expandafter\ifx\csname #1@ raw\endcsname\relax
- \expandafter\let\csname #1@ raw\endcsname\temp at macro\fi
- \expandafter\edef\csname#1\endcsname{%
- \noexpand\push{\noexpand\edef\noexpand\next@@{%
- \noexpand\noexpand \noexpand \csname \noexpand#1@ raw\noexpand\endcsname
- \the\temp at toks}%
- \noexpand\popnil\noexpand\clrp at r@s\noexpand\next@@}\noexpand\st at ckparas
- \the\temp@@toks \noexpand\p at r@end}}%
-%
-% \setdefalut{cmdname}{n}{default1}{..}{default_n}
-% then \cmdname[#1][..][#n] can be defaulted.
-\def\setdefault#1#2{\def\make at default{\make@@default{#1}{#2}}\read at paras{#2}}
-%
-% DEFAULT MECHANISM END: this piece of code can be included in any
-% package and can be reloaded any times without overruning the resources.
-%
-% Now an example to use \setdefault:
-% lower a box
-\long\def\xylower#1#2#3{\bgroup\hskip#1\hbox{% #1=x #2=y #3=content
- \ifmmode\let\SoftLower\undefined\else\def\SoftLower{}$\fi
- \mathop{\vtop{\ialign{##\crcr \noalign{\kern#2}#3\crcr}}}%
- \ifx\SoftLower\undefined\else $\fi}\egroup}%
-%
-% #1=box position(0) #2=x shift(0pt) #3=y shift(0pt) #6=v (vbox)
-% #4,#5=extra x,y shift in multiple of box width/10, height/10 #7=content
-\long\def\placebox[#1][#2][#3][#4][#5][#6]#7{\begingroup
-\def\temp at macro{#6}\def\temp@@macro{v}\ifx\temp at macro\temp@@macro
-\setbox\temp at box=\vbox{#7}\else \leavevmode % #1 (box position)
-\setbox\temp at box=\hbox{#7}\fi\temp at dim=-\wd\temp at box % 1--6--2
-\temp@@dim=\ht\temp at box \temp@@@dim=\dp\temp at box % | |
-\ifnum#1<0 \temp at count=-#1 \else\temp at count=#1 \fi % | |
-\ifnum\temp at count=0 \temp at count=5 \fi % | |
-\ifcase\temp at count % 9 5 7 0 is -5
- \or \temp at dim=0pt \temp@@dim=0pt % | |
- \or \temp@@dim=0pt % 10 11 12 <-height up
- \or \advance\temp@@dim by \temp@@@dim % | | depth down
- \temp@@dim=-\temp@@dim % 4--8--3
- \or \temp at dim=0pt \advance\temp@@dim by %
- \temp@@@dim \temp@@dim=-\temp@@dim % -#1: box has no width etc
- \or \divide\temp at dim by 2 \advance\temp@@@dim by \temp@@dim
- \divide\temp@@@dim by 2 \temp@@dim=-\temp@@@dim
- \or \divide\temp at dim by 2 \temp@@dim=0pt
- \or \advance\temp@@dim by \temp@@@dim
- \temp@@dim=-\temp@@dim \divide\temp@@dim by 2
- \or \advance\temp@@dim by \temp@@@dim
- \temp@@dim=-\temp@@dim \divide\temp at dim by 2
- \or \temp at dim=0pt \advance\temp@@dim by \temp@@@dim
- \temp@@dim=-\temp@@dim \divide\temp@@dim by 2
- \or \temp at dim=0pt \advance\temp@@@dim by \temp@@dim \temp@@dim=-\temp@@dim
- \or \divide\temp at dim by 2
- \advance\temp@@@dim by \temp@@dim \temp@@dim=-\temp@@dim
- \or \advance\temp@@@dim by \temp@@dim \temp@@dim=-\temp@@dim
- \or \errmessage{Invalid range of first parameter: #1}\fi
- \advance\temp at dim by #2 \advance \temp@@dim by #3
- \temp@@@dim=\wd\temp at box \divide \temp@@@dim by 10
- \multiply\temp@@@dim by #4 \advance\temp at dim by \temp@@@dim
- \temp@@@dim=\ht\temp at box \advance\temp@@@dim by \dp\temp at box
- \divide \temp@@@dim by 10 \multiply\temp@@@dim by #5
- \advance\temp@@dim by \temp@@@dim
- \setbox\temp at box=\hbox{\xylower{\temp at dim}{\temp@@dim}{\box\temp at box}}%
- \ifnum#1>0 \else \wd\temp at box=0pt \ht\temp at box=0pt \dp\temp at box=0pt \fi
- \box\temp at box\endgroup
-}%
-%
-\ifx\setdefault\undefined\else\setdefault{placebox}{6}{0}{0pt}{0pt}{0}{0}{h}\fi
-% example ends
-%
-\let\wlog\temp@@@macro\let\temp@@@macro\undefined@
-\catcode`\@=\EntryDefault\relax
-\endinput
-%
-%ENDMACROS
-%
Deleted: trunk/Master/texmf-dist/tex/generic/genmisc/dow.tex
===================================================================
--- trunk/Master/texmf-dist/tex/generic/genmisc/dow.tex 2020-03-10 16:46:34 UTC (rev 54221)
+++ trunk/Master/texmf-dist/tex/generic/genmisc/dow.tex 2020-03-10 16:50:57 UTC (rev 54222)
@@ -1,44 +0,0 @@
-%%%------------Start Cutting------------------------------------------
-% \dowcomp returns integer day of week in \dow with Sunday=0.
-% \downame returns the name of the day of the week.
-% E.g., if \year=1963 \month=11 \day=22,
-% then \dowcomp ==> \dow=5 and \downame ==> Friday which happened
-% to be the day President John F. Kennedy was assasinated.
-
-% Converted from the lisp function DOW by Jon L. White given in
-% the file LIBDOC DOW JONL3 on MIT-MC (which follows).
-
-%(defun dow (year month day)
-% (and (and (fixp year) (fixp month) (fixp day))
-% ((lambda (a)
-% (declare (fixnum a))
-% (\ (+ (// (1- (* 13. (+ month 10.
-% (* (// (+ month 10.) -13.) 12.))))
-% 5.)
-% day
-% 77.
-% (// (* 5. (- a (* (// a 100.) 100.))) 4.)
-% (// a -2000.)
-% (// a 400.)
-% (* (// a -100.) 2.))
-% 7.))
-% (+ year (// (+ month -14.) 12.)))))
-
-\newcount\dow
-\def\dowcomp{{\count3 \month \advance\count3 -14 \divide\count3 12
- \advance\count3 \year \count4 \month \advance\count4 10
- \divide\count4 -13 \multiply\count4 12 \advance\count4 10
- \advance\count4 \month \multiply\count4 13 \advance\count4 -1
- \divide\count4 5 \advance\count4 \day \advance\count4 77
- \count2 \count3 \divide\count2 100 \multiply\count2 -100
- \advance\count2 \count3 \multiply\count2 5 \divide\count2 4
- \advance\count4 \count2 \count2 \count3 \divide\count2 -2000
- \advance\count4 \count2 \count2 \count3 \divide\count2 400
- \advance\count4 \count2 \count2 \count3 \divide\count2 -100
- \multiply\count2 2 \advance\count4 \count2 \count2 \count4
- \divide\count2 7 \multiply\count2 -7 \advance\count4 \count2
- \global\dow \count4}}
-
-\def\dayname{\dowcomp \ifcase\dow Sunday\or Monday\or Tuesday\or
- Wednesday\or Thursday\or Friday\else Saturday\fi}
-%%%--------------Stop cutting-----------------------------------------
Deleted: trunk/Master/texmf-dist/tex/generic/genmisc/emtrees.tex
===================================================================
--- trunk/Master/texmf-dist/tex/generic/genmisc/emtrees.tex 2020-03-10 16:46:34 UTC (rev 54221)
+++ trunk/Master/texmf-dist/tex/generic/genmisc/emtrees.tex 2020-03-10 16:50:57 UTC (rev 54222)
@@ -1,87 +0,0 @@
-%From: hwb at texnix.stgt.sub.org (Harald Boegeholz)
-%Newsgroups: comp.text.tex
-%Date: 14 Jan 91 13:44:29 GMT
-%
-%Hi!
-%
-%Some time ago I wrote some TeX-macros to typeset trees. Since
-%two people asked recently, here they are (quite short, so I thought
-%I might post). Be aware, though, of two possible problems:
-% 1. The macros use the \specials defined by emTeX. If your DVI-driver
-% doesn't support these, you won't see any lines.
-% 2. The semantic nest size required is considerable (too many boxes
-% inside of boxes inside of boxes...), so you'll possibly need
-% a TeX which is "large" in this respect for typesetting complex trees.
-%
-%Hope this helps
-%Harald
-%------------------ cut here with a sharp knife ------------------------
-%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
-% tree macros by Harald Boegeholz
-% This file uses the \specials defined by emTeX to draw the lines!
-%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
-\newcount\pointnumber \pointnumber=0
-\newcount\father
-\font\nodefont=cmr7
-\def\nextpoint{\global\advance\pointnumber by 1\relax}
-\def\endsubtrees{\endsubtrees}
-\def\tn#1{\vbox{%
- \vskip.5mm
- \hbox{\nodefont\hskip1ex\relax #1\hskip1ex}
- \vskip.5mm
- }%
-}
-\def\tree#1#2{%
- \vtop{%
- \nextpoint
- \father=\pointnumber
- \halign{\hfil##\hfil\cr
- #1\cr
- \special{em:point \number\father}\cr
- \noalign{\vskip5mm}
- \hbox{\subtrees#2\endsubtrees}\cr
- }%
- }%
-}%
-\def\subtrees#1{\ifx#1\endsubtrees\let\next\relax\else
- \vbox{\halign{\hfil##\hfil\cr
- \nextpoint
- \special{em:point \number\pointnumber}%
- \special{em:line \number\pointnumber h,\number\father h}\cr
- #1\cr
- }}%
- \let\next\subtrees\fi
- \next
-}
-\def\labeledtree#1#2{\vbox{\offinterlineskip\halign{\hfil##\hfil\cr
- #1\cr
- \noalign{\vskip3pt}%
- $\scriptstyle#2$\cr
-}}}
-
-\parindent0pt
-\raggedbottom
-
-%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
-% macros end here ... sample follows:
-%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
-\endinput
-
-{\labeledtree{%
- {\tree{\tn{1}}{%
- {\tree{\tn{2}}{%
- {\tn{3}}%
- {\tn{4}}%
- }}%
- {\tree{\tn{5}}{%
- {\tn{6}}%
- }}%
- }}%
-}{[1,2,2,1,5]}}%
-
-\bye
------------------- cut here with a sharp knife ------------------------
---
-Harald Boegeholz |Home: hwb at texnix.stgt.sub.org (read daily)
- |University: boegehol at az3.informatik.uni-stuttgart.de
- | ^ please use the latter for large (>100k) mails
Deleted: trunk/Master/texmf-dist/tex/generic/genmisc/endnote.tex
===================================================================
--- trunk/Master/texmf-dist/tex/generic/genmisc/endnote.tex 2020-03-10 16:46:34 UTC (rev 54221)
+++ trunk/Master/texmf-dist/tex/generic/genmisc/endnote.tex 2020-03-10 16:50:57 UTC (rev 54222)
@@ -1,36 +0,0 @@
-% Use \endnote{1}{text}. At the end of your document, type
-% \producenotes to actually flush all end notes to be printed.
-%
-% macros for making endnotes instead of footnotes
-% We make @ signs act like letters, temporarily, to avoid conflict
-% between user names and internal control sequences of plain format.
-\catcode`@=11
-\newbox\endnotebox
-\def\setendnotefont#1{\gdef\endnotefont{#1}}
-\setendnotefont{\rm}
-\def\endnote#1{\let\@sf\empty
- \ifhmode\edef\@sf{\spacefactor\the\spacefactor}\/\fi
- #1\@sf\vendnote{{#1}}}
-\def\vendnote#1{\global\setbox\endnotebox=
- \vbox{\parindent=0pt\endnotefont\unvbox\endnotebox\bgroup
- \indent\llap#1\ignorespaces\futurelet\next\aftergroup\no at te\relax}}
-\def\no at te{\ifcat\bgroup\noexpand\next \let\next\n@@te
- \else\let\next\n at t\fi \next}
-\def\n@@te{\bgroup\aftergroup\@endnote\let\next}
-\def\n at t#1{#1\@endnote}
-\def\@endnote{\strut\egroup}
-%
-\newcount\enotecounter
-\def\resetenotecount{\global\enotecounter=0 } \resetenotecount
-\def\setenotecount#1{\global\enotecounter=#1 }
-%
-\def\setendnoteflagfont#1{\gdef\endnoteflagfont{#1}}
-\setendnoteflagfont{\sevenrm}
-\def\enote{\unskip
- \global\advance \enotecounter by 1 % First bump the counter.
- % Now convert the current value of the counter into a superscripted numeral
- \endnote{{$^{\hbox{\endnoteflagfont\the\enotecounter}}$}}}
-%
-\def\producenotes{%
-\ifvoid\endnotebox\else\medskip\unvbox\endnotebox\par\fi}
-\catcode`@=12 % at signs are no longer letters
Deleted: trunk/Master/texmf-dist/tex/generic/genmisc/fakebold.tex
===================================================================
--- trunk/Master/texmf-dist/tex/generic/genmisc/fakebold.tex 2020-03-10 16:46:34 UTC (rev 54221)
+++ trunk/Master/texmf-dist/tex/generic/genmisc/fakebold.tex 2020-03-10 16:50:57 UTC (rev 54222)
@@ -1,5 +0,0 @@
-\def\fakebold#1{\leavevmode\setbox0=\hbox{#1}%
- \kern-.025em\copy0 \kern-\wd0
- \kern .05em\copy0 \kern-\wd0
- \kern-.025em\raise.0433em\box0
-}
Deleted: trunk/Master/texmf-dist/tex/generic/genmisc/hep.tex
===================================================================
--- trunk/Master/texmf-dist/tex/generic/genmisc/hep.tex 2020-03-10 16:46:34 UTC (rev 54221)
+++ trunk/Master/texmf-dist/tex/generic/genmisc/hep.tex 2020-03-10 16:50:57 UTC (rev 54222)
@@ -1,12 +0,0 @@
-\def\slasha#1{\setbox0=\hbox{$#1$}#1\hskip-\wd0\hbox to\wd0{\hss\sl/\/\hss}}
-\def\slashb#1{\setbox0=\hbox{$#1$}#1\hskip-\wd0\dimen0=5pt\advance
- \dimen0 by-\ht0\advance\dimen0 by\dp0\lower0.5\dimen0\hbox
- to\wd0{\hss\sl/\/\hss}}
-% Four macros for Dirac's bracket notation of expectation values
-\def\bra#1{\left< #1\right|}
-\def\ket#1{\left| #1\right>}
-\def\bracket#1#2{\left<#1\mid #2\right>}
-\def\EV#1#2#3{\bra{#1}#2\ket{#3}}
-% And finally a macro for printing so-called `normal ordered' products
-% They are denoted by a colon on either side
-\normalord#1{\mathopen{:}#1\mathclose{:}}
Deleted: trunk/Master/texmf-dist/tex/generic/genmisc/inscrutable.tex
===================================================================
--- trunk/Master/texmf-dist/tex/generic/genmisc/inscrutable.tex 2020-03-10 16:46:34 UTC (rev 54221)
+++ trunk/Master/texmf-dist/tex/generic/genmisc/inscrutable.tex 2020-03-10 16:50:57 UTC (rev 54222)
@@ -1,11 +0,0 @@
-% Date: Thu, 7 Feb 91 12:20:50 -0500
-%From: amgreene at ATHENA.MIT.EDU
-%Subject: A response to perl hackers
-\let~\catcode~`?`\
-\let?\the~`#?~`~~`]?~`~\let]\let~`\.?~`~~`,?~`~~`\%?~`~~`=?~`~]=\def
-],\expandafter~`[?~`~][{=%{\message[}~`\$?~`~=${\uccode`'.\uppercase
-{,=,%,{%'}}}~`*?~`~=*{\advance.by}]#\number~`/?~`~=/{*-1}\newcount.
-=\-{*-}~`-?~`~]-\-~`^?~`~=^{*1}~`\ ?~`~= {.`\ $}~`@?~`~=@{,.,"#`@^$}
-.`#*`'$.?~`~0-?~`~$//$^$ .``^$*?~`~$^$.?~`~0-?~`~/$-?~`~^$@*?~`~$ *
-?~`~*?~`~*?~`~*?~`~$@-?~`~$ .?~`~0-?~`~-?~`~$.``^$^^$.`<-?~`~*`<$@*
-?~`~$*?~`~-`(-`+$%}\batchmode
More information about the tex-live-commits
mailing list.