texlive[53738] Master/texmf-dist: euclideangeometry (9feb20)
commits+karl at tug.org
commits+karl at tug.org
Sun Feb 9 23:07:48 CET 2020
Revision: 53738
http://tug.org/svn/texlive?view=revision&revision=53738
Author: karl
Date: 2020-02-09 23:07:48 +0100 (Sun, 09 Feb 2020)
Log Message:
-----------
euclideangeometry (9feb20)
Modified Paths:
--------------
trunk/Master/texmf-dist/doc/latex/euclideangeometry/README.txt
trunk/Master/texmf-dist/doc/latex/euclideangeometry/euclideangeometry-man.pdf
trunk/Master/texmf-dist/doc/latex/euclideangeometry/euclideangeometry-man.tex
trunk/Master/texmf-dist/doc/latex/euclideangeometry/euclideangeometry.pdf
trunk/Master/texmf-dist/source/latex/euclideangeometry/euclideangeometry.dtx
trunk/Master/texmf-dist/tex/latex/euclideangeometry/euclideangeometry.sty
Modified: trunk/Master/texmf-dist/doc/latex/euclideangeometry/README.txt
===================================================================
--- trunk/Master/texmf-dist/doc/latex/euclideangeometry/README.txt 2020-02-09 22:07:33 UTC (rev 53737)
+++ trunk/Master/texmf-dist/doc/latex/euclideangeometry/README.txt 2020-02-09 22:07:48 UTC (rev 53738)
@@ -10,7 +10,7 @@
%% License information appended
%%
File README.txt for package euclideangeometry
- [2020-02-02 v.0.1.2 Extension package for curve2e]
+ [2020-02-09 v.0.1.3 Extension package for curve2e]
The package bundle euclideangeometry is composed of the following files
Modified: trunk/Master/texmf-dist/doc/latex/euclideangeometry/euclideangeometry-man.pdf
===================================================================
(Binary files differ)
Modified: trunk/Master/texmf-dist/doc/latex/euclideangeometry/euclideangeometry-man.tex
===================================================================
--- trunk/Master/texmf-dist/doc/latex/euclideangeometry/euclideangeometry-man.tex 2020-02-09 22:07:33 UTC (rev 53737)
+++ trunk/Master/texmf-dist/doc/latex/euclideangeometry/euclideangeometry-man.tex 2020-02-09 22:07:48 UTC (rev 53738)
@@ -10,10 +10,96 @@
\usepackage{etoolbox,enumitem,xspace,xcolor,euclideangeometry}
\usepackage{url}
+\providecommand\file{}
+\renewcommand*\file[1]{{\normalfont\texttt{#1}}}
+\providecommand\prog{}
+\renewcommand*\prog[1]{{\normalfont\texttt{#1}}}
+\newcommand*\conta[1]{\texttt{\slshape#1}}
+\providecommand\cs{}
+\renewcommand\cs[1]{{\normalfont\texttt{\char92#1}}}
+\providecommand\meta{}
+\renewcommand*\meta[1]{{\normalfont$\langle$\textit{#1}$\rangle$}}
+\providecommand\marg{}
+\renewcommand*\marg[1]{{\ttfamily \char123\meta{#1}\char125}}
+\newcommand*\Marg[1]{{\normalfont\ttfamily\{#1\}}}\let\Arg\Marg
+\providecommand\oarg{}
+\renewcommand*\oarg[1]{{\ttfamily[\meta{#1}]}}
+\newcommand*\Oarg[1]{{\ttfamily[#1]}}
+\newcommand*\aarg[1]{{\ttfamily{<\meta{#1}>}}}
+\newcommand*\Aarg[1]{{\ttfamily<#1>}}
+\newcommand*\Bambiente[1]{\texttt{\char92begin\{#1\}}}
+\newcommand*\Eambiente[1]{\texttt{\char92end\{#1\}}}
+\newcommand*\garg[1]{\texttt{(\splitgarg#1,!)}}\let\parg\garg
+\newcommand*\Garg[1]{\texttt{(#1)}}\let\Parg\Garg
+ \def\secgarg#1,{#1}
+ \def\splitgarg#1,#2!{%
+ \ifstrequal{#2}{}{\meta{#1}}{\meta{#1},\meta{\secgarg#2}}}
+\providecommand\pack{}
+\renewcommand*\pack[1]{{\normalfont\textsf{#1}}}
+\providecommand\opt{}
+\renewcommand*\opt[1]{{\normalfont\textsl{#1}}}\let\opz\opt
+\providecommand\env{}
+\renewcommand*\env[1]{{\normalfont\textit{\bfseries#1}}}\let\amb\env
+
+\providecommand*\ped[1]{\ensuremath{_{\mathrm{#1}}}}
+\providecommand*\ap[1]{\ensuremath{^{\mathrm{#1}}}}
+\providecommand*\unit[1]{\ensuremath{\,\mathrm{#1}}}
+\providecommand*\sigla[1]{\textsc{\lowercase{#1}}}
+\providecommand*\iu{\ensuremath{\mathrm{i}}}\let\gei\iu
+\providecommand*\eu{\ensuremath{\mathop{\mathrm{e}}\nolimits}}
+
+\providecommand\GetFileInfo{}
+\makeatletter
+\renewcommand*\GetFileInfo[1]{%
+ \def\filename{#1}%
+ \def\@tempb##1 v.##2 ##3\relax##4\relax{%
+ \def\filedate{##1}\def\fileversion{##2}\def\fileinfo{##3}}%
+ \edef\@tempa{\csname ver@#1\endcsname}%
+ \expandafter\@tempb\@tempa\relax? ? \relax\relax}
+\makeatother
+
+\DeclareRobustCommand*{\Ars}{% for the bibliography
+ \textsf{\lower -.48ex\hbox{\rotatebox{-20}{A}}\kern -.3em{rs}}%
+ \kern -.05em\TeX\unskip\kern -.17em\lower -.357ex\hbox{nica}\xspace}
+
+
+\definecolor{verdeguit}{rgb}{0, 0.40, 0}
+\providecommand\GuIT{\mbox{\color{verdeguit}\def\I{\textcolor{black}{I}}%
+ \fontfamily{lmr}\fontseries{m}\fontshape{sc}\selectfont
+g\raisebox{-0.715ex}{\kern-0.26em u}\kern-0.13em\I\kern-0.14em t}\xspace}
+
+
+\makeatletter
\AfterEndPreamble{%
-\apptocmd{\TeX}{{}\xspace}{}{}
-\apptocmd{\LaTeX}{{}\xspace}{}{}}
+\DeclareRobustCommand{\TeX}{T\kern-.1667em\lower.5ex\hbox{E}\kern-.125emX\@\xspace}
+\DeclareRobustCommand{\LaTeX}{L\kern-.36em%
+ {\sbox\z@ T%
+ \vbox to\ht\z@{\hbox{\check at mathfonts
+ \fontsize\sf at size\z@
+ \math at fontsfalse\selectfont
+ A}%
+ \vss}%
+ }%
+ \kern-.15em%
+ \TeX}}\makeatother
+\DeclareRobustCommand*\TeXLive{\TeX\ Live\xspace}
+\DeclareRobustCommand*\MiKTeX{MiK\TeX}
+\DeclareRobustCommand*\MacTeX{Mac\TeX}
+\DeclareRobustCommand*\pdfLaTeX{pdf\/\LaTeX}
+\DeclareRobustCommand*\LuaLaTeX{Lua\LaTeX}
+\DeclareRobustCommand*\XeLaTeX{X\ifdim\fontdimen1\font=0pt\kern-0.15em\fi
+\lower.5ex\hbox{\rotatebox[origin=c]{180}{E}}%
+\ifdim\fontdimen1\font=0pt\kern-0.15em\else\kern-0.275em\fi
+\LaTeX}
+\DeclareRobustCommand*\TikZ{Ti\emph{k}Z\xspace}
+\DeclareRobustCommand*\TUGboat{\textsl{TUG\-boat}\xspace}
+
+\def\hz{\hskip0pt}
+
+
+
+
\newcommand\heart[3]{%
\edef\X{\fpeval{#1*16*(sind(#2)^3)}}
\edef\Y{\fpeval{#1*(13*cosd(#2) - 5*cosd(2*#2)
@@ -152,7 +238,7 @@
user is invoking \pack{euclideangeometry}, it is certain s/he does
not want to use the native picture environment, but the modern
extended one; therefore the only meaningful possible options are
- \opt{latex} and\opt{pstricks}; such options influence only the shape
+ \opt{latex} and \opt{pstricks}; such options influence only the shape
of the arrow tips; with option \opt{latex} they are triangular,
while with \opt{pstricks} they have the shape of a stealth
aircraft. The difference is very small; therefore we imagine that
Modified: trunk/Master/texmf-dist/doc/latex/euclideangeometry/euclideangeometry.pdf
===================================================================
(Binary files differ)
Modified: trunk/Master/texmf-dist/source/latex/euclideangeometry/euclideangeometry.dtx
===================================================================
--- trunk/Master/texmf-dist/source/latex/euclideangeometry/euclideangeometry.dtx 2020-02-09 22:07:33 UTC (rev 53737)
+++ trunk/Master/texmf-dist/source/latex/euclideangeometry/euclideangeometry.dtx 2020-02-09 22:07:48 UTC (rev 53738)
@@ -45,7 +45,7 @@
%<package>\ProvidesPackage{euclideangeometry}%
%<readme>File README.txt for package euclideangeometry
%<*package|readme>
- [2020-02-02 v.0.1.2 Extension package for curve2e]
+ [2020-02-09 v.0.1.3 Extension package for curve2e]
%</package|readme>
%<*driver>
\documentclass{ltxdoc}\errorcontextlines=100
@@ -56,6 +56,13 @@
\usepackage{multicol,amsmath,fancyvrb,graphicx,verbatim}
\usepackage{etoolbox,enumitem,xspace,xcolor,euclideangeometry}
\providecommand*\diff{\mathop{}\!\mathrm{d}}
+\providecommand\file{}
+\renewcommand*\file[1]{{\normalfont\texttt{#1}}}
+\providecommand\prog{}
+\renewcommand*\prog[1]{{\normalfont\texttt{#1}}}
+\newcommand*\conta[1]{\texttt{\slshape#1}}
+\providecommand\cs{}
+\renewcommand\cs[1]{{\normalfont\texttt{\char92#1}}}
\renewcommand\meta[1]{{\normalfont\textlangle\textit{#1}\textrangle}}
\renewcommand\marg[1]{\texttt{\{\meta{#1}\}}}
\providecommand\Marg{}
@@ -81,9 +88,6 @@
\providecommand\TB{\mbox{\normalfont\slshape TUGboat}\xspace}
-\AfterEndPreamble{%
-\apptocmd{\TeX}{{}\xspace}{}{}
-\apptocmd{\LaTeX}{{}\xspace}{}{}}
\begin{document}\errorcontextlines=100
@@ -110,7 +114,7 @@
% installed with your updated complete \TeX system installation.
% Please refer to the user manual before using this package.
-% \CheckSum{1557}
+%^^A \CheckSum{}
%^^A%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
%\StopEventually{}
%^^A%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
@@ -128,32 +132,6 @@
%^^A%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
% This package has been already identified by the commands extracted
% by the |docstrip| package, during the |.dtx| file compilation.
-% Therefore we start providing the |\GetFileInfo| in case the package
-% is used outside a “documented \TeX\ source”; we just provide the
-% definition from the |ltxdoc| class code.
-% \begin{macrocode}
-\makeatletter
-\providecommand\GetFileInfo{}
-\renewcommand\GetFileInfo[1]{%
- \def\filename{#1}%
- \def\@tempb##1 v.##2 ##3\relax##4\relax{%
- \def\filedate{##1}\def\fileversion{##2}\def\fileinfo{##3}}%
- \edef\@tempa{\csname ver@#1\endcsname}%
- \expandafter\@tempb\@tempa\relax? ? \relax\relax}
-% \end{macrocode}
-%
-% But in order to make the file date comparison for loading a suitable
-% version of |curve2e| we need to strip away its date dash signs,
-% so we define the |\cleanfiledate| macro that defines a |\FileDate| macro
-% with a purely numerical string, suitable for numerical comparisons;
-% if the fetched class file is so old that the date is not in the ISO
-% format (for example with slashes instead of dashes) the macro fails
-% and the interpreter comparison algorithm produces \TeX\ error messages.
-% \begin{macrocode}
-\def\cleanfiledate#1-#2-#3!{\unless\ifx#3\empty
-\edef\FileDate{#1#2#3}\else\unless\ifx#2\empty
-\edef\FileDate{#1#2}\else\edef\FileDate{#1}\fi\fi}
-% \end{macrocode}
% In any case, if the test checks that the |curve2e| file date is too old;
% it warns the user with an emphasised error message on the console,
% loading this |euclideangeometry| package is stopped and the whole
@@ -167,87 +145,26 @@
%*************************************************************
%\end{flushleft}
% This message should be sufficiently strong in order to avoid using
-% this package with a vintage version of \TeXLive or Mik\TeX.
+% this package with a vintage version of \TeXLive or \MikTeX.
% \begin{macrocode}
\RequirePackage{curve2e}
-\GetFileInfo{curve2e.sty}
-\expandafter\cleanfiledate\filedate!
+\@ifpackagelater{curve2e}{2020/01/18}{}%
+ {%
+ \typeout{*************************************************************}
+ \typeout{Package curve2e too old}
+ \typeout{Be sure that your TeX installation is complete and up to date}
+ \typeout{*************************************************************}
+ \typeout{Input of euclideangeometry stopped and job aborted}
+ \typeout{*************************************************************}
+ \@@end
+ }%
-\ifnum\FileDate<20200118
-\typeout{*************************************************************}
-\typeout{Package curve2e too old}
-\typeout{Be sure that your TeX installation is complete and up to date}
-\typeout{*************************************************************}
-\typeout{Input of euclideangeometry stopped and job aborted}
-\typeout{*************************************************************}
-\expandafter\@@end\fi
-
% \end{macrocode}
%^^A%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
% \subsection{Service macros}
%^^A%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
-% The following macros are useful for typesetting the manual; but they
-% might be useful also for the final user; they mostly define commands
-% that classify the various entities of the programming language with
-% (generally different) font families, series and shapes; but the commands
-% that receive the “name of an argument” enclose this name between math
-% angle brackets.
-% \begin{macrocode}
-\providecommand\file{}
-\renewcommand*\file[1]{{\normalfont\texttt{#1}}}
-\providecommand\prog{}
-\renewcommand*\prog[1]{{\normalfont\texttt{#1}}}
-\newcommand*\conta[1]{\texttt{\slshape#1}}
-\providecommand\cs{}
-\renewcommand\cs[1]{{\normalfont\texttt{\char92#1}}}
-\providecommand\meta{}
-\renewcommand*\meta[1]{{\normalfont$\langle$\textit{#1}$\rangle$}}
-\providecommand\marg{}
-\renewcommand*\marg[1]{{\ttfamily \char123\meta{#1}\char125}}
-\newcommand*\Marg[1]{{\normalfont\ttfamily\{#1\}}}\let\Arg\Marg
-\providecommand\oarg{}
-\renewcommand*\oarg[1]{{\ttfamily[\meta{#1}]}}
-\newcommand*\Oarg[1]{{\ttfamily[#1]}}
-\newcommand*\aarg[1]{{\ttfamily{<\meta{#1}>}}}
-\newcommand*\Aarg[1]{{\ttfamily<#1>}}
-\newcommand*\Bambiente[1]{\texttt{\char92begin\{#1\}}}
-\newcommand*\Eambiente[1]{\texttt{\char92end\{#1\}}}
-\newcommand*\garg[1]{\texttt{(\splitgarg#1,!)}}\let\parg\garg
-\newcommand*\Garg[1]{\texttt{(#1)}}\let\Parg\Garg
- \def\secgarg#1,{#1}
- \def\splitgarg#1,#2!{%
- \ifstrequal{#2}{}{\meta{#1}}{\meta{#1},\meta{\secgarg#2}}}
-\providecommand\pack{}
-\renewcommand*\pack[1]{{\normalfont\textsf{#1}}}
-\providecommand\opt{}
-\renewcommand*\opt[1]{{\normalfont\textsl{#1}}}\let\opz\opt
-\providecommand\env{}
-\renewcommand*\env[1]{{\normalfont\textit{\bfseries#1}}}\let\amb\env
-% \end{macrocode}
-% The next commands are defined in the |babel-italian| module for |babel|;
-% |\ped| introduces a subscript in math mode, but the command may be used
-% also in text mode; the same holds true also for |\ap| that introduces
-% a superscript. |\unit| is a shorthand for attaching the units of measure
-% in math upright roman font, with an unbreakable space between the measure
-% and its units; |\sigla| is the Italian equivalent of |\acronym|, that
-% avoids any conflict with other packages; |\iu| (alias|\gei|) typesets
-% the imaginary unit in roman font according to the ISO regulations;
-% |\eu| defines the roman type “e”, the Neper number, as a math operator;
-% we all know that “e” is not an operator, but it is used very often as
-% the base of an exponential, therefore, in math mode it is better to
-% leave the necessary space before and after it, without any space between
-% it and its exponent.
-% \begin{macrocode}
-\providecommand*\ped[1]{\ensuremath{_{\mathrm{#1}}}}
-\providecommand*\ap[1]{\ensuremath{^{\mathrm{#1}}}}
-\providecommand*\unit[1]{\ensuremath{\,\mathrm{#1}}}
-\providecommand*\sigla[1]{\textsc{\lowercase{#1}}}
-\providecommand*\iu{\ensuremath{\mathrm{i}}}\let\gei\iu
-\providecommand*\eu{\ensuremath{\mathop{\mathrm{e}}\nolimits}}
-% \end{macrocode}
%
-% The next code is used to typeset the logo of \Ars logo, and the logo
-% of \LyX; the other command |\GuIT| typesets equally well the \GuIT logo;
+% The next code is used to typeset the \GuIT logo;
% if necessary the |\RequirePackage| macro loads the |xspace| package;
% therefore these macros do not require any special terminator of the
% control sequence name, because the |\xspace| command takes care of the
@@ -256,56 +173,13 @@
% punctuation marks, parentheses, quotation marks, and so on.
%
% \begin{macrocode}
-\DeclareRobustCommand*{\Ars}{%
- \textsf{\lower -.48ex\hbox{\rotatebox{-20}{A}}\kern -.3em{rs}}%
- \kern -.05em\TeX\unskip\kern -.17em\lower -.357ex\hbox{nica}\xspace}
-
-\DeclareRobustCommand*\LyX{%
- L\kern-0.2em\raisebox{-0.5ex}{Y}\kern-0.2em{X}\xspace}
\definecolor{verdeguit}{rgb}{0, 0.40, 0}
-\RequirePackage{iftex}
\def\GuIT{\mbox{\color{verdeguit}\def\I{\textcolor{black}{I}}%
-\ifPDFTeX
- \usefont{T1}{lmr}{m}{sc}
-\else
- \usefont{TU}{lmr}{m}{sc}
-\fi
+ \fontfamily{lmr}\fontseries{m}\fontshape{sc}\selectfont
g\raisebox{-0.715ex}{\kern-0.26em u}\kern-0.13em\I\kern-0.14em t}\xspace}
% \end{macrocode}
-% The following macros |\usecs| and |\whilenum| allow the use the internal
-% \LaTeX control sequence names that contain a |@| sign. They are not so
-% useful in this package, but they might be useful for the end user.
-% \begin{macrocode}
-\providecommand*\usecs[1]{\csname#1\endcsname}
-\providecommand*\whilenum[2]{\usecs{@whilenum}#1\do{#2}}
-% \end{macrocode}
-% Accordingly the following two macros, and their English aliases, allow
-% to delay the output of a (possibly floating) object to a page of the
-% desired parity; they are not infallible, because the the |\afterpage|
-% command defined by package |afterpage| (loaded if necessary) operates
-% on the typesetting program output routine and the object to be delayed
-% might be lost on the way, or might get delayed too much; these facts
-% take place very seldom, but are not impossible, the solution is to move
-% back several paragraphs the command with is argument.
-% \begin{macrocode}
-\RequirePackage{afterpage}
-\providecommand\supaginapari[1]{%
- \afterpage{%
- \ifodd\value{page}\expandafter\@firstoftwo
- \else\expandafter\@secondoftwo
- \fi{\supaginapari{#1}}{#1}
- }
-}\let\onevenpage\supaginapari
-\providecommand\supaginadispari[1]{%
- \afterpage{%
- \ifodd\value{page}\expandafter\@secondoftwo
- \else\expandafter\@firstoftwo
- \fi{\supaginadispari{#1}}{#1}
- }
-}\let\onoddpage\supaginadispari
-% \end{macrocode}
-% The following \LaTeX related logos are provided so as to make them
+% The following \LaTeX related logos are provided so as to make them
% coherent with the smart final space we have discussed above. The real
% difference is that it is necessary to use tue |etoolbox| facilities;
% therefore the package is (possibly) loaded. With it we add at the end
@@ -324,11 +198,21 @@
% \begin{macrocode}
\RequirePackage{etoolbox}
\AfterEndPreamble{%
-\apptocmd{\TeX}{{}\xspace}{}{}
-\apptocmd{\LaTeX}{{}\xspace}{}{}}
+\DeclareRobustCommand{\TeX}{T\kern-.1667em
+ \lower.5ex\hbox{E}\kern-.125emX\@\xspace}
+\DeclareRobustCommand{\LaTeX}{L\kern-.36em%
+ {\sbox\z@ T%
+ \vbox to\ht\z@{\hbox{\check at mathfonts
+ \fontsize\sf at size\z@
+ \math at fontsfalse\selectfont
+ A}%
+ \vss}%
+ }%
+ \kern-.15em%
+ \TeX}}
\DeclareRobustCommand*\TeXLive{\TeX\ Live\xspace}
-\DeclareRobustCommand*\MiKTeX{MiK\TeX}
+\DeclareRobustCommand*\MikTeX{Mik\TeX}
\DeclareRobustCommand*\MacTeX{Mac\TeX}
\DeclareRobustCommand*\pdfLaTeX{pdf\/\LaTeX}
\DeclareRobustCommand*\LuaLaTeX{Lua\LaTeX}
@@ -337,20 +221,8 @@
\ifdim\fontdimen1\font=0pt\kern-0.15em\else\kern-0.275em\fi
\LaTeX}
\DeclareRobustCommand*\TikZ{Ti\emph{k}Z\xspace}
-\DeclareRobustCommand*\TUGboat{\textsl{TUG\-boat}\xspace}
+
% \end{macrocode}
-% The following command is useful to output two column floats when
-% typesetting in |twocolumn| mode.
-% \begin{macrocode}
-\renewcommand\dbltopfraction{1.}
-% \end{macrocode}
-% This apparently useless command becomes useful to separate a font
-% selection command or the |\item| command from the following text so
-% as to allow hyphenation in what follows; it is just a very innocent
-% dirty trick, but it works.
-% \begin{macrocode}
-\def\hz{\hskip0pt}
-% \end{macrocode}
% Here we have a command that allows to display some framed code; it is
% usable also to display the syntax of some commands; and when doing this
% action the full range of service macros at the beginning of this section
@@ -453,11 +325,11 @@
% to use the optional asterisk to frame the text.
% \begin{macrocode}
\providecommand\Pbox{}
+\newlength\PbDim
\RenewDocumentCommand\Pbox{D(){0,0} O{cc} m O{0.5ex} s D<>{0}}{%
\put(#1){\rotatebox{#6}{\makebox(0,0){%
-\dimendef\Dim=2566\relax
-\settowidth\Dim{#2}%
-\edef\Rapp{\fpeval{\Dim/{1ex}}}%
+\settowidth\PbDim{#2}%
+\edef\Rapp{\fpeval{\PbDim/{1ex}}}%
\fptest{\Rapp > 1.5}{\fboxsep=0.5ex}{\fboxsep=0.75ex}%
\IfBooleanTF{#5}{\fboxrule=0.4pt}{\fboxrule=0pt}%
\fptest{#4 = 0sp}%
@@ -514,24 +386,24 @@
% \begin{macrocode}
\def\EUGsplitArgs(#1,#2)#3#4{\edef#3{#1}\edef#4{#2}}
-
+\newlength\EUGZbox
\providecommand\Zbox{}
-\RenewDocumentCommand\Zbox{R(){0,0} D(){0,0} O{bl} m}{%
-\EUGsplitArgs(#2)\ZboxX\ZboxY % separa la x e la y della scatola
+\RenewDocumentCommand\Zbox{r() D(){0,0} O{bl} m}{%
+\EUGsplitArgs(#2)\ZboxX\ZboxY % splits box dimensions
\fboxsep=2\unitlength
-\ifnum\ZboxX=\csuse{z@}
+\ifnum\ZboxX=\z@
\def\ZTesto{\fbox{#4}}%
\else
- \ifnum\ZboxY=\csuse{z@}
+ \ifnum\ZboxY=\z@
\def\ZTesto{\fbox{\parbox{\ZboxX\unitlength}{#4}}}%
\else
\def\ZTesto{%
- \setbox2560=\hbox{\fbox{%
+ \setbox\EUGZbox=\hbox{\fbox{%
\parbox[c][\ZboxY\unitlength][c]{\ZboxX\unitlength}{#4}}}%
- \dimen2560=\dimexpr(\ht2560 +\dp2560)/2\relax
- \ht2560=\dimen2560\relax
- \dp2560=\dimen2560\relax
- \box2560%
+ \dimen\EUGZbox=\dimexpr(\ht\EUGZbox +\dp\EUGZbox)/2\relax
+ \ht\EUGZbox=\dimen\EUGZbox\relax
+ \dp\EUGZbox=\dimen\EUGZbox\relax
+ \box\EUGZbox%
}%
\fi
\fi
@@ -538,71 +410,6 @@
\put(#1){\makebox(0,0)[#3]{\ZTesto}}\ignorespaces}
% \end{macrocode}
-%^^A%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
-%\subsection{The \texttt{Example} environment}
-%^^A%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
-%
-% Another very useful facility is the |Esempio| environment;
-% it has an English alias |Example|, but we suggest to use the Italian
-% name, because it is safer in order to avoid conflicts with other packages;
-% this environment is very handy to typeset a stretch of code side by
-% side its typeset result obtained by executing it; it has advantages and
-% disadvantages, though. A similar environment was used to show the
-% examples in the \emph{The \LaTeX Companion}; another similar environment
-% may be used from the |tcolorbox| package (by T.F.~Sturm, read its
-% documentation by using the terminal command |texdoc tcolorbox|)
-% environment |tcolorbox| and using the keyword |sidebyside| among the
-% options; package |fancyvrb| also offers a similar environment.
-% The critical disadvantage is that that you cannot use any of these
-% environments, not even this |Esempio| one, when typesetting a
-% documented \TeX file, such as the one you are reading now. In facts
-% the |.dtx| file has all text lines that start with a comment character,
-% and the code parts, to be output to a |.sty|, or |.cls|, or whatever
-% other file used by the \TeX system to format documents, are explicitly
-% marked with the special delimiters \verb*|% \begin{macrocode}| and
-% \verb*|% \end{macrocode}|.
-%
-% Therefore with those packages and with this |Esempio| environment
-% the code you want to show appears with all lines with a |%| at the
-% beginning. This certainly does not help the description of a software
-% and this is the very reason why this package has a separate
-% |euclideangeometry-man| manual typeset with the |article| class.
-%
-% Nevertheless this environment makes use of the facilities of the
-% |verbatim| environment.
-%
-% \begin{macrocode}
-\RequirePackage{verbatim}
-\newwrite\example at out
-\ProvideDocumentEnvironment{Esempio}{s O{\normalsize} D(){0.40}}
-{\par\addvspace{3.0ex plus 0.8ex minus 0.5ex}\vskip -\parskip
-\dimendef\Wboxu=2570 \dimendef\Wboxd=2572
-\Wboxu=#3\textwidth\relax
-\Wboxd=\dimexpr\linewidth-\columnsep-\Wboxu\relax
-\begingroup
-\@bsphack
-\immediate\openout\example at out\jobname-temp.tex
-\let\do\@makeother\dospecials\catcode`\^^M\active
-\def\verbatim at processline{%
- \immediate\write\example at out{\the\verbatim at line}}%
-\verbatim at start\relax}%
-{\immediate\closeout\example at out\@esphack\endgroup
-\begin{minipage}{\textwidth}%
-\IfBooleanTF{#1}{\begin{minipage}{\textwidth}}{\begin{minipage}{\Wboxu}}%
-#2\relax
-\verbatiminput{\jobname-temp.tex}
-\end{minipage}%
-\IfBooleanTF{#1}{\par\bigskip}{\hfill}%
-\IfBooleanTF{#1}{\begin{minipage}{\textwidth}}{\begin{minipage}{\Wboxd}}%
-\raggedleft
-\input{\jobname-temp}
-\end{minipage}
-\end{minipage}\par
-%\medskip
-%\par\addvspace{3.0ex plus 0.8ex minus 0.5ex}\vskip -\parskip
-}
-% \end{macrocode}
-
%^^A%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
% \subsection{Service macros for ellipses}
%^^A%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
@@ -708,7 +515,7 @@
\XpartOfVect\IntPu to \xu \YpartOfVect\IntPu to \yu
\XpartOfVect\IntPd to \xd \YpartOfVect\IntPd to \yd
\edef\Den{\fpeval{-(\a*\d-\b*\c)}}%
- \fptest{abs(\Den)<1e-5}{% almost vanishing determinant
+ \fptest{abs(\Den)<1e-5}{% Almost vanishing determinant
\def#5{0,0}%
}{% Determinant OK
\edef\Numx{\fpeval{(\c*(\b*\xu-\a*\yu)-\a*(\d*\xd-\c*\yd))/\Den}}%
@@ -770,13 +577,13 @@
%
% \begin{macrocode}
-\NewDocumentCommand\ThreePointCircle{s d() d() d()}{%
+\NewDocumentCommand\ThreePointCircle{s r() r() r()}{%
\AxisOf#2and#3to\Mu\Du \AxisOf#2and#4to\Md\Dd
\IntersectionOfLines(\Mu)(\Du)and(\Md)(\Dd)to\C
\SubVect#2from\C to\R
\IfBooleanTF{#1}{\CircleWithCenter\C Radius\R}{}\ignorespaces}
-\NewDocumentCommand\ThreePointCircleCenter{d() d() d() m}{%
+\NewDocumentCommand\ThreePointCircleCenter{r() r() r() m}{%
\ThreePointCircle(#1)(#2)(#3)\CopyVect\C to#4}
% \end{macrocode}
%
@@ -819,7 +626,7 @@
%\begin{ttsyntax}
%\cs{AxisOf}\meta{P1} and\meta{P2} to\meta{Axis1}\meta{Axis2}
%\end{ttsyntax}
-% Macros |\SegmentCenter| and |\MiddlePointOf| are alias to one another;
+% Macros |\SegmentCenter| and |\MiddlePointOf| are alias of one another;
% their syntax is:
%\begin{ttsyntax}
%\cs{SegmentCenter}\parg{P1}\parg{P2}to\meta{center}
@@ -1231,15 +1038,16 @@
% See the documentation \file{euclideangeometry-man.pdf} for more
% information and usage examples.
% \begin{macrocode}
-
+\newcount\RPI
\NewDocumentCommand\RegPolygon{s D(){0,0} m m O{0} D<>{\relax} }{{%
-\countdef\I=258 \I=0
+%\countdef\RPI=258
+\RPI=0
\CopyVect#5:#3to\P
\CopyVect\fpeval{360/#4}:1to\R
\put(#2){#6\relax
- \moveto(\P)\fpdowhile{\I < #4}%
- {\MultVect\P by\R to\P%\GetCoord(\P)\X\Y
- \lineto(\P)\advance\I by 1}%
+ \moveto(\P)\fpdowhile{\RPI < #4}%
+ {\MultVect\P by\R to\P
+ \lineto(\P)\advance\RPI by 1}%
\IfBooleanTF{#1}%
{\fillpath}{#6\strokepath}}}\ignorespaces}
%%%%%%%%%
@@ -1541,6 +1349,13 @@
% facilities; but, taking into consideration my age, I would invite
% the users to consider the possibility of assuming the maintenance
% of this package.
+%^^A%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
+%\section*{Aknowledgements}
+%^^A%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
+% I am very grateful to Enrico Gregorio who let me know the several
+% glitches I made in my first version; besides being a real \TeX wizard,
+% he is a wise person and suggested me several things that was important
+% to change, because they could offer risks of confusion with other packages.
%
%\iffalse
%</package>
Modified: trunk/Master/texmf-dist/tex/latex/euclideangeometry/euclideangeometry.sty
===================================================================
--- trunk/Master/texmf-dist/tex/latex/euclideangeometry/euclideangeometry.sty 2020-02-09 22:07:33 UTC (rev 53737)
+++ trunk/Master/texmf-dist/tex/latex/euclideangeometry/euclideangeometry.sty 2020-02-09 22:07:48 UTC (rev 53738)
@@ -11,108 +11,42 @@
%%
\NeedsTeXFormat{LaTeX2e}[2019/01/01]
\ProvidesPackage{euclideangeometry}%
- [2020-02-02 v.0.1.2 Extension package for curve2e]
+ [2020-02-09 v.0.1.3 Extension package for curve2e]
-\makeatletter
-\providecommand\GetFileInfo{}
-\renewcommand\GetFileInfo[1]{%
- \def\filename{#1}%
- \def\@tempb##1 v.##2 ##3\relax##4\relax{%
- \def\filedate{##1}\def\fileversion{##2}\def\fileinfo{##3}}%
- \edef\@tempa{\csname ver@#1\endcsname}%
- \expandafter\@tempb\@tempa\relax? ? \relax\relax}
-\def\cleanfiledate#1-#2-#3!{\unless\ifx#3\empty
-\edef\FileDate{#1#2#3}\else\unless\ifx#2\empty
-\edef\FileDate{#1#2}\else\edef\FileDate{#1}\fi\fi}
\RequirePackage{curve2e}
-\GetFileInfo{curve2e.sty}
-\expandafter\cleanfiledate\filedate!
+\@ifpackagelater{curve2e}{2020/01/18}{}%
+ {%
+ \typeout{*************************************************************}
+ \typeout{Package curve2e too old}
+ \typeout{Be sure that your TeX installation is complete and up to date}
+ \typeout{*************************************************************}
+ \typeout{Input of euclideangeometry stopped and job aborted}
+ \typeout{*************************************************************}
+ \@@end
+ }%
-\ifnum\FileDate<20200118
-\typeout{*************************************************************}
-\typeout{Package curve2e too old}
-\typeout{Be sure that your TeX installation is complete and up to date}
-\typeout{*************************************************************}
-\typeout{Input of euclideangeometry stopped and job aborted}
-\typeout{*************************************************************}
-\expandafter\@@end\fi
-\providecommand\file{}
-\renewcommand*\file[1]{{\normalfont\texttt{#1}}}
-\providecommand\prog{}
-\renewcommand*\prog[1]{{\normalfont\texttt{#1}}}
-\newcommand*\conta[1]{\texttt{\slshape#1}}
-\providecommand\cs{}
-\renewcommand\cs[1]{{\normalfont\texttt{\char92#1}}}
-\providecommand\meta{}
-\renewcommand*\meta[1]{{\normalfont$\langle$\textit{#1}$\rangle$}}
-\providecommand\marg{}
-\renewcommand*\marg[1]{{\ttfamily \char123\meta{#1}\char125}}
-\newcommand*\Marg[1]{{\normalfont\ttfamily\{#1\}}}\let\Arg\Marg
-\providecommand\oarg{}
-\renewcommand*\oarg[1]{{\ttfamily[\meta{#1}]}}
-\newcommand*\Oarg[1]{{\ttfamily[#1]}}
-\newcommand*\aarg[1]{{\ttfamily{<\meta{#1}>}}}
-\newcommand*\Aarg[1]{{\ttfamily<#1>}}
-\newcommand*\Bambiente[1]{\texttt{\char92begin\{#1\}}}
-\newcommand*\Eambiente[1]{\texttt{\char92end\{#1\}}}
-\newcommand*\garg[1]{\texttt{(\splitgarg#1,!)}}\let\parg\garg
-\newcommand*\Garg[1]{\texttt{(#1)}}\let\Parg\Garg
- \def\secgarg#1,{#1}
- \def\splitgarg#1,#2!{%
- \ifstrequal{#2}{}{\meta{#1}}{\meta{#1},\meta{\secgarg#2}}}
-\providecommand\pack{}
-\renewcommand*\pack[1]{{\normalfont\textsf{#1}}}
-\providecommand\opt{}
-\renewcommand*\opt[1]{{\normalfont\textsl{#1}}}\let\opz\opt
-\providecommand\env{}
-\renewcommand*\env[1]{{\normalfont\textit{\bfseries#1}}}\let\amb\env
-\providecommand*\ped[1]{\ensuremath{_{\mathrm{#1}}}}
-\providecommand*\ap[1]{\ensuremath{^{\mathrm{#1}}}}
-\providecommand*\unit[1]{\ensuremath{\,\mathrm{#1}}}
-\providecommand*\sigla[1]{\textsc{\lowercase{#1}}}
-\providecommand*\iu{\ensuremath{\mathrm{i}}}\let\gei\iu
-\providecommand*\eu{\ensuremath{\mathop{\mathrm{e}}\nolimits}}
-\DeclareRobustCommand*{\Ars}{%
- \textsf{\lower -.48ex\hbox{\rotatebox{-20}{A}}\kern -.3em{rs}}%
- \kern -.05em\TeX\unskip\kern -.17em\lower -.357ex\hbox{nica}\xspace}
-
-\DeclareRobustCommand*\LyX{%
- L\kern-0.2em\raisebox{-0.5ex}{Y}\kern-0.2em{X}\xspace}
-
\definecolor{verdeguit}{rgb}{0, 0.40, 0}
-\RequirePackage{iftex}
\def\GuIT{\mbox{\color{verdeguit}\def\I{\textcolor{black}{I}}%
-\ifPDFTeX
- \usefont{T1}{lmr}{m}{sc}
-\else
- \usefont{TU}{lmr}{m}{sc}
-\fi
+ \fontfamily{lmr}\fontseries{m}\fontshape{sc}\selectfont
g\raisebox{-0.715ex}{\kern-0.26em u}\kern-0.13em\I\kern-0.14em t}\xspace}
-\providecommand*\usecs[1]{\csname#1\endcsname}
-\providecommand*\whilenum[2]{\usecs{@whilenum}#1\do{#2}}
-\RequirePackage{afterpage}
-\providecommand\supaginapari[1]{%
- \afterpage{%
- \ifodd\value{page}\expandafter\@firstoftwo
- \else\expandafter\@secondoftwo
- \fi{\supaginapari{#1}}{#1}
- }
-}\let\onevenpage\supaginapari
-\providecommand\supaginadispari[1]{%
- \afterpage{%
- \ifodd\value{page}\expandafter\@secondoftwo
- \else\expandafter\@firstoftwo
- \fi{\supaginadispari{#1}}{#1}
- }
-}\let\onoddpage\supaginadispari
\RequirePackage{etoolbox}
\AfterEndPreamble{%
-\apptocmd{\TeX}{{}\xspace}{}{}
-\apptocmd{\LaTeX}{{}\xspace}{}{}}
+\DeclareRobustCommand{\TeX}{T\kern-.1667em
+ \lower.5ex\hbox{E}\kern-.125emX\@\xspace}
+\DeclareRobustCommand{\LaTeX}{L\kern-.36em%
+ {\sbox\z@ T%
+ \vbox to\ht\z@{\hbox{\check at mathfonts
+ \fontsize\sf at size\z@
+ \math at fontsfalse\selectfont
+ A}%
+ \vss}%
+ }%
+ \kern-.15em%
+ \TeX}}
\DeclareRobustCommand*\TeXLive{\TeX\ Live\xspace}
-\DeclareRobustCommand*\MiKTeX{MiK\TeX}
+\DeclareRobustCommand*\MikTeX{Mik\TeX}
\DeclareRobustCommand*\MacTeX{Mac\TeX}
\DeclareRobustCommand*\pdfLaTeX{pdf\/\LaTeX}
\DeclareRobustCommand*\LuaLaTeX{Lua\LaTeX}
@@ -121,9 +55,7 @@
\ifdim\fontdimen1\font=0pt\kern-0.15em\else\kern-0.275em\fi
\LaTeX}
\DeclareRobustCommand*\TikZ{Ti\emph{k}Z\xspace}
-\DeclareRobustCommand*\TUGboat{\textsl{TUG\-boat}\xspace}
-\renewcommand\dbltopfraction{1.}
-\def\hz{\hskip0pt}
+
\newenvironment{ttsintassi}{\begin{lrbox}{0}
\minipage{\dimexpr\linewidth-2\fboxrule-2\fboxsep}\ttfamily\obeylines}%
{\endminipage\end{lrbox}\center\fbox{\box0}\endcenter}
@@ -135,11 +67,11 @@
\IfValueTF{#2}{\put(#1){\originalGraphGrid(#2)}}%
{\put(0,0){\originalGraphGrid(#1)}}}\fi
\providecommand\Pbox{}
+\newlength\PbDim
\RenewDocumentCommand\Pbox{D(){0,0} O{cc} m O{0.5ex} s D<>{0}}{%
\put(#1){\rotatebox{#6}{\makebox(0,0){%
-\dimendef\Dim=2566\relax
-\settowidth\Dim{#2}%
-\edef\Rapp{\fpeval{\Dim/{1ex}}}%
+\settowidth\PbDim{#2}%
+\edef\Rapp{\fpeval{\PbDim/{1ex}}}%
\fptest{\Rapp > 1.5}{\fboxsep=0.5ex}{\fboxsep=0.75ex}%
\IfBooleanTF{#5}{\fboxrule=0.4pt}{\fboxrule=0pt}%
\fptest{#4 = 0sp}%
@@ -153,58 +85,30 @@
\linespread{#1}\fontsize{#2}{#2}\selectfont}
\def\EUGsplitArgs(#1,#2)#3#4{\edef#3{#1}\edef#4{#2}}
-
+\newlength\EUGZbox
\providecommand\Zbox{}
-\RenewDocumentCommand\Zbox{R(){0,0} D(){0,0} O{bl} m}{%
-\EUGsplitArgs(#2)\ZboxX\ZboxY % separa la x e la y della scatola
+\RenewDocumentCommand\Zbox{r() D(){0,0} O{bl} m}{%
+\EUGsplitArgs(#2)\ZboxX\ZboxY % splits box dimensions
\fboxsep=2\unitlength
-\ifnum\ZboxX=\csuse{z@}
+\ifnum\ZboxX=\z@
\def\ZTesto{\fbox{#4}}%
\else
- \ifnum\ZboxY=\csuse{z@}
+ \ifnum\ZboxY=\z@
\def\ZTesto{\fbox{\parbox{\ZboxX\unitlength}{#4}}}%
\else
\def\ZTesto{%
- \setbox2560=\hbox{\fbox{%
+ \setbox\EUGZbox=\hbox{\fbox{%
\parbox[c][\ZboxY\unitlength][c]{\ZboxX\unitlength}{#4}}}%
- \dimen2560=\dimexpr(\ht2560 +\dp2560)/2\relax
- \ht2560=\dimen2560\relax
- \dp2560=\dimen2560\relax
- \box2560%
+ \dimen\EUGZbox=\dimexpr(\ht\EUGZbox +\dp\EUGZbox)/2\relax
+ \ht\EUGZbox=\dimen\EUGZbox\relax
+ \dp\EUGZbox=\dimen\EUGZbox\relax
+ \box\EUGZbox%
}%
\fi
\fi
\put(#1){\makebox(0,0)[#3]{\ZTesto}}\ignorespaces}
-\RequirePackage{verbatim}
-\newwrite\example at out
-\ProvideDocumentEnvironment{Esempio}{s O{\normalsize} D(){0.40}}
-{\par\addvspace{3.0ex plus 0.8ex minus 0.5ex}\vskip -\parskip
-\dimendef\Wboxu=2570 \dimendef\Wboxd=2572
-\Wboxu=#3\textwidth\relax
-\Wboxd=\dimexpr\linewidth-\columnsep-\Wboxu\relax
-\begingroup
-\@bsphack
-\immediate\openout\example at out\jobname-temp.tex
-\let\do\@makeother\dospecials\catcode`\^^M\active
-\def\verbatim at processline{%
- \immediate\write\example at out{\the\verbatim at line}}%
-\verbatim at start\relax}%
-{\immediate\closeout\example at out\@esphack\endgroup
-\begin{minipage}{\textwidth}%
-\IfBooleanTF{#1}{\begin{minipage}{\textwidth}}{\begin{minipage}{\Wboxu}}%
-#2\relax
-\verbatiminput{\jobname-temp.tex}
-\end{minipage}%
-\IfBooleanTF{#1}{\par\bigskip}{\hfill}%
-\IfBooleanTF{#1}{\begin{minipage}{\textwidth}}{\begin{minipage}{\Wboxd}}%
-\raggedleft
-\input{\jobname-temp}
-\end{minipage}
-\end{minipage}\par
-}
-
\NewDocumentCommand\ellisse{ s m m}{%
\IfBooleanTF{#1}%
{\let\fillstroke\fillpath}%
@@ -235,7 +139,7 @@
\XpartOfVect\IntPu to \xu \YpartOfVect\IntPu to \yu
\XpartOfVect\IntPd to \xd \YpartOfVect\IntPd to \yd
\edef\Den{\fpeval{-(\a*\d-\b*\c)}}%
- \fptest{abs(\Den)<1e-5}{% almost vanishing determinant
+ \fptest{abs(\Den)<1e-5}{% Almost vanishing determinant
\def#5{0,0}%
}{% Determinant OK
\edef\Numx{\fpeval{(\c*(\b*\xu-\a*\yu)-\a*(\d*\xd-\c*\yd))/\Den}}%
@@ -248,13 +152,13 @@
\SubVect#3from#4to\IoSvectd \DirOfVect\IoSvectd to\DirIoSVecd
\IntersectionOfLines(#1)(\DirIoSVecu)and(#3)(\DirIoSVecd)to#5\ignorespaces}
-\NewDocumentCommand\ThreePointCircle{s d() d() d()}{%
+\NewDocumentCommand\ThreePointCircle{s r() r() r()}{%
\AxisOf#2and#3to\Mu\Du \AxisOf#2and#4to\Md\Dd
\IntersectionOfLines(\Mu)(\Du)and(\Md)(\Dd)to\C
\SubVect#2from\C to\R
\IfBooleanTF{#1}{\CircleWithCenter\C Radius\R}{}\ignorespaces}
-\NewDocumentCommand\ThreePointCircleCenter{d() d() d() m}{%
+\NewDocumentCommand\ThreePointCircleCenter{r() r() r() m}{%
\ThreePointCircle(#1)(#2)(#3)\CopyVect\C to#4}
\def\CircleWithCenter#1Radius#2{\put(#1){\ModOfVect#2to\CWR
\circle{\fpeval{2*\CWR}}}\ignorespaces}
@@ -393,15 +297,15 @@
\IfValueTF{#9}{\let\fillstroke\strokepath
#9\Sellisse{#5}{#7}[#4]}{}}}%
\ignorespaces}
-
+\newcount\RPI
\NewDocumentCommand\RegPolygon{s D(){0,0} m m O{0} D<>{\relax} }{{%
-\countdef\I=258 \I=0
+\RPI=0
\CopyVect#5:#3to\P
\CopyVect\fpeval{360/#4}:1to\R
\put(#2){#6\relax
- \moveto(\P)\fpdowhile{\I < #4}%
- {\MultVect\P by\R to\P%\GetCoord(\P)\X\Y
- \lineto(\P)\advance\I by 1}%
+ \moveto(\P)\fpdowhile{\RPI < #4}%
+ {\MultVect\P by\R to\P
+ \lineto(\P)\advance\RPI by 1}%
\IfBooleanTF{#1}%
{\fillpath}{#6\strokepath}}}\ignorespaces}
%%%%%%%%%
More information about the tex-live-commits
mailing list.