texlive[52042] Build/source/utils/axodraw2: axohelp 1.3
commits+kakuto at tug.org
commits+kakuto at tug.org
Sat Sep 7 00:26:30 CEST 2019
Revision: 52042
http://tug.org/svn/texlive?view=revision&revision=52042
Author: kakuto
Date: 2019-09-07 00:26:30 +0200 (Sat, 07 Sep 2019)
Log Message:
-----------
axohelp 1.3
Modified Paths:
--------------
trunk/Build/source/utils/axodraw2/ChangeLog
trunk/Build/source/utils/axodraw2/TLpatches/TL-Changes
trunk/Build/source/utils/axodraw2/axodraw2-src/ChangeLog
trunk/Build/source/utils/axodraw2/axodraw2-src/README
trunk/Build/source/utils/axodraw2/axodraw2-src/axodraw2-man.pdf
trunk/Build/source/utils/axodraw2/axodraw2-src/axodraw2-man.tex
trunk/Build/source/utils/axodraw2/axodraw2-src/axodraw2.sty
trunk/Build/source/utils/axodraw2/axodraw2-src/axohelp-big.test
trunk/Build/source/utils/axodraw2/axodraw2-src/axohelp.c
trunk/Build/source/utils/axodraw2/axodraw2-src/axohelp.test
trunk/Build/source/utils/axodraw2/axodraw2-src/test-big.ax2-std
trunk/Build/source/utils/axodraw2/configure
trunk/Build/source/utils/axodraw2/configure.ac
Modified: trunk/Build/source/utils/axodraw2/ChangeLog
===================================================================
--- trunk/Build/source/utils/axodraw2/ChangeLog 2019-09-06 21:14:35 UTC (rev 52041)
+++ trunk/Build/source/utils/axodraw2/ChangeLog 2019-09-06 22:26:30 UTC (rev 52042)
@@ -1,3 +1,8 @@
+2019-09-07 Akira Kakuto <kakuto at w32tex.org>
+
+ Import v1.3 from ctan.org/pkg/axodraw2.
+ * configure.ac: update version.
+
2018-02-21 Karl Berry <karl at tug.org>
Import v1.1 from ctan.org/pkg/axodraw2.
Modified: trunk/Build/source/utils/axodraw2/TLpatches/TL-Changes
===================================================================
--- trunk/Build/source/utils/axodraw2/TLpatches/TL-Changes 2019-09-06 21:14:35 UTC (rev 52041)
+++ trunk/Build/source/utils/axodraw2/TLpatches/TL-Changes 2019-09-06 22:26:30 UTC (rev 52042)
@@ -1,5 +1,4 @@
Changes applied to the axodraw tree as obtained from
https://ctan.org/pkg/axodraw2
-Remove:
- axohelp.exe
+No changes.
Modified: trunk/Build/source/utils/axodraw2/axodraw2-src/ChangeLog
===================================================================
--- trunk/Build/source/utils/axodraw2/axodraw2-src/ChangeLog 2019-09-06 21:14:35 UTC (rev 52041)
+++ trunk/Build/source/utils/axodraw2/axodraw2-src/ChangeLog 2019-09-06 22:26:30 UTC (rev 52042)
@@ -30,3 +30,8 @@
axodraw2 package [v. 2.1.1 2018/02/20]
axodraw2.sty [v. 2.1.1 2018/02/15]
axohelp [v. 1.2 2018/02/20]
+2019/07/30
+ axohelp: Exit code on error is 1, not -1 (unsigned is more OS-independent)
+ axohelp: Clean up CleanupOutput subroutine
+ axohelp: Fix bug in use of identification line
+ axohelp: Fix stack overflow bugs in subroutine DoOneObject
Modified: trunk/Build/source/utils/axodraw2/axodraw2-src/README
===================================================================
--- trunk/Build/source/utils/axodraw2/axodraw2-src/README 2019-09-06 21:14:35 UTC (rev 52041)
+++ trunk/Build/source/utils/axodraw2/axodraw2-src/README 2019-09-06 22:26:30 UTC (rev 52042)
@@ -1,8 +1,8 @@
-Axodraw2 2.1.1 2018/02/15
-=========================
+Axodraw2 2.1.1b 2019/09/02
+==========================
axodraw2.sty version is v2.1.1 2018/02/15
-axohelp.c version is 1.2 2018/02/14
+axohelp.c version is 1.3 2019/08/30
Axodraw2 is a package that defines macros for drawing Feynman graphs
in LaTeX documents.
@@ -30,7 +30,6 @@
axodraw2-man.tex Source for documentation
example.tex Example latex file for use of axodraw2
axohelp.c Source code of axohelp
- axohelp.exe MS-Windows executable for axohelp
axohelp.1 Man page for axohelp
axohelp.test Script for testing axohelp
test.ax1 Input file for test
@@ -49,7 +48,7 @@
Authors, copyright, license
---------------------------
-(C) 1994-2018 John Collins (jcc8 at psu dot edu) and Jos Vermaseren
+(C) 1994-2019 John Collins (jcc8 at psu dot edu) and Jos Vermaseren
(t68 at nikhef dot nl)
Axodraw2 is free software: you can redistribute it and/or modify it
Modified: trunk/Build/source/utils/axodraw2/axodraw2-src/axodraw2-man.pdf
===================================================================
(Binary files differ)
Modified: trunk/Build/source/utils/axodraw2/axodraw2-src/axodraw2-man.tex
===================================================================
--- trunk/Build/source/utils/axodraw2/axodraw2-src/axodraw2-man.tex 2019-09-06 21:14:35 UTC (rev 52041)
+++ trunk/Build/source/utils/axodraw2/axodraw2-src/axodraw2-man.tex 2019-09-06 22:26:30 UTC (rev 52042)
@@ -76,7 +76,7 @@
Science Park 105, 1098 XG Amsterdam, The Netherlands} \\
\texttt{t68 at nikhef dot nl} \\
\vspace{1.0cm}
-(15 February 2018)
+(2 September 2019)
\end{center}
\vspace{5mm}
@@ -397,8 +397,7 @@
At the moment that this document was updated (January 2018), axodraw2
was part of both the main \TeX{} distributions, TeXLive and MiKTeX.
The easiest way to install axodraw2 is therefore from the package
-manager of your \TeX{} distribution. (There is one complication
-concerning the \program{axohelp} program --- see below.)
+manager of your \TeX{} distribution.
You can also obtain axodraw2 from CTAN at
\url{http://ctan.org/pkg/axodraw2}, and install it manually, following
@@ -405,15 +404,12 @@
the instructions in Sec.\ \ref{sec:manual.install} below.
\paragraph{\program{axohelp} in TeXLive}
-In TeXLive 2017, a binary executable for the \program{axohelp} was not
-provided, even though the rest of the axodraw2 package was provided.
-Thus you could use axodraw2 with the \program{latex} but not with
-\program{pdflatex} unless you compiled and installed the program
-\program{axohelp} yourself following the instructions below. This is
-planned to be changed in TeXLive 2018, when \program{axohelp} should
-be provided as part of the distribution when the package axodraw2 is
-installed from the package manager.
+In TeXLive 2018 and later, a binary executable for the
+\program{axohelp} is provided, as part of the \program{axodraw2}
+package. So \program{axohelp} is available provided that the
+\program{axodraw2} package is installed..
+
\paragraph{\program{axohelp} in MiKTeX}
The axodraw2 package including an executable \program{axohelp.exe} was
provided by MiKTeX when this was checked in January 2018.
@@ -454,44 +450,49 @@
supplemented by running the relevant commands with the \program{sudo}
program.
-But note that if you later install the axodraw2 package from the
-package manager of you \TeX{} distribution, it's a good idea to delete
-the files you installed manually. Otherwise when you use axodraw2 in
-a document, then the wrong version of \file{axodraw2.sty} may get
-used. This is a particularly important issue after possible future
-updates to axodraw2 get installed by the package manager.
+If you later install the axodraw2 package from the package manager of
+your \TeX{} distribution, it's a good idea to delete the files you
+installed manually. Otherwise when you use axodraw2 in a document,
+then the wrong version of \file{axodraw2.sty} may get used. This is a
+particularly important issue after possible future updates to axodraw2
+get installed by the package manager.
%--
\subsubsection{Helper program \program{axohelp}}
\label{sec:axohelp}
-If you wish to use axodraw2 with \program{pdflatex}, \program{lualatex},
-or \program{xelatex}., then you need to install the \program{axohelp}
-program.
+If you wish to use axodraw2 with \program{pdflatex},
+\program{lualatex}, or \program{xelatex}, then you need to install the
+\program{axohelp} program. \emph{(It is useful to reiterate here that
+ the standard distributions of \TeX{} currently supply the
+ \program{axohelp} program. So the steps described here are only
+ necessary if for some reason you wish to do a manual installation.
+ One possible reason is to use a recent update of \program{axohelp},
+ since TeXLive normally only supplies updated versions of binary
+ executable files with the initial release of one of TeXLive's yearly
+ versions.)}
-On a Unix-like system (e.g., linux or OS-X), you first need to compile
-the program by a C compiler. An appropriate shell command to do this
-is
+To install \program{axohelp} manually, you will first need to compile
+the program by a C compiler. Under a Unix-like operating system
+(linux or macOS) an appropriate shell command is
\begin{verbatim}
cc -o axohelp -O3 axohelp.c -lm
\end{verbatim}
(Note that this is a C compiler, \emph{not} a C++ compiler.) Most linux
systems have the program \program{cc} already installed. This also applies to
-OS-X at versions below 10.7. But on OS-X version 10.7 and higher, you
+macOS(OS-X) at versions below 10.7. But on macOS version 10.7 and higher, you
will need to install a compiler, which can be done by installing XCode
and the associated command-line utilities. If you have the GNU
compilers installed, you might need to use the command \program{gcc}
instead of \program{cc}.
-For Microsoft Windows, if you do not have a C compiler available, you
-can use the Windows binary \file{axohelp.exe} we have provided. It
-was compiled on Windows 10, and should work with at least that version
-of Windows.
+For Microsoft Windows, you will need to have installed a C compiler,
+and use it to compile \file{axohelp.c}.
-In any case once you have the executable (named \program{axohelp} on
-unix-like systems, or \program{axohelp.exe} on a Microsoft system), put
-it in a directory where it will be found when you run programs from
-the command line.
+Once you have the executable (named \program{axohelp} on Unix-like
+systems, or \program{axohelp.exe} on a Microsoft system), put it in a
+directory where it will be found when you run programs from the
+command line.
%--
Modified: trunk/Build/source/utils/axodraw2/axodraw2-src/axodraw2.sty
===================================================================
--- trunk/Build/source/utils/axodraw2/axodraw2-src/axodraw2.sty 2019-09-06 21:14:35 UTC (rev 52041)
+++ trunk/Build/source/utils/axodraw2/axodraw2-src/axodraw2.sty 2019-09-06 22:26:30 UTC (rev 52042)
@@ -69,7 +69,7 @@
%
% #] About folds :
%
-\ProvidesPackage{axodraw2}[2018/02/15 v2.1.1]
+\ProvidesPackage{axodraw2}[2018/10/10 v2.1.2]
%
% axodraw.sty file, both for .tex -> .dvi -> .ps and for .tex -> .pdf
%
@@ -3127,7 +3127,12 @@
% Left on stack: dr = length of line
3 index 3 index translate
2 index sub exch 3 index sub
- 2 copy atan rotate
+% 2 copy atan rotate
+ 2 copy
+ 2 copy 0 ne exch 0 ne or
+ {atan rotate}
+ {pop pop}
+ ifelse
dup mul exch dup mul add sqrt
3 1 roll pop pop
} def
Modified: trunk/Build/source/utils/axodraw2/axodraw2-src/axohelp-big.test
===================================================================
--- trunk/Build/source/utils/axodraw2/axodraw2-src/axohelp-big.test 2019-09-06 21:14:35 UTC (rev 52041)
+++ trunk/Build/source/utils/axodraw2/axodraw2-src/axohelp-big.test 2019-09-06 22:26:30 UTC (rev 52042)
@@ -3,6 +3,7 @@
# Copyright (C) 2018 John Collins (jcc8 at psu dot edu)
# You may freely use, modify and/or distribute this file.
+# Prevent errors from sed if it encounters non-UTF-8 strings in utf-8 locale
LC_ALL=C; export LC_ALL; LANGUAGE=C; export LANGUAGE
# Notes about interpretation of tests:
Modified: trunk/Build/source/utils/axodraw2/axodraw2-src/axohelp.c
===================================================================
--- trunk/Build/source/utils/axodraw2/axodraw2-src/axohelp.c 2019-09-06 21:14:35 UTC (rev 52041)
+++ trunk/Build/source/utils/axodraw2/axodraw2-src/axohelp.c 2019-09-06 22:26:30 UTC (rev 52042)
@@ -1,7 +1,12 @@
/*
+
+ Need to do:
+ 1. Fix reporting of number of object to in-file number
+ 2. Or Don't require object 0 for ID line
+
#[ License :
- (C) 2016-2018 by authors:
+ (C) 2016-2019 by authors:
John Collins (jcc8 at psu dot edu)
Jos Vermaseren (t68 at nikhef dot nl)
@@ -60,6 +65,7 @@
#include <stdlib.h>
#include <math.h>
#include <string.h>
+#include <ctype.h>
/*
#] Includes :
@@ -67,9 +73,9 @@
*/
#define NAME "axohelp"
-#define VERSIONDATE "2018 Feb 20"
+#define VERSIONDATE "2019 Aug 28"
#define VERSION 1
-#define SUBVERSION 2
+#define SUBVERSION 3
#define COMMENTCHAR '%'
#define TERMCHAR ';'
@@ -110,7 +116,10 @@
int flip = 0;
int clockwise = 0;
-void OutputString(char *);
+void CleanupOutput(char *str);
+void send( char* str );
+void sendClean( char* str );
+
void ArrowHead();
void GetArrow(double *);
void BezierArrow(double *);
@@ -329,40 +338,43 @@
#[ PDF utilities :
These routines are included to make the program more readable and easier
- to write. It also allows the easy use of the OutputString routine that
+ to write. It also allows the easy use of the OutputString?? OLD name routine that
compactifies the output.
*/
-#define Stroke outpos += sprintf(outpos," S")
-#define CloseAndStroke outpos += sprintf(outpos," h S")
-#define Fill outpos += sprintf(outpos," f")
-#define CloseAndFill outpos += sprintf(outpos," h f")
-#define SaveGraphicsState outpos += sprintf(outpos," q")
-#define RestoreGraphicsState outpos += sprintf(outpos," Q")
+#define Stroke send(" S")
+#define CloseAndStroke send(" h S")
+#define Fill send(" f")
+#define CloseAndFill send(" h f")
+#define SaveGraphicsState send(" q")
+#define RestoreGraphicsState send(" Q")
void Bezier(double x1,double y1,double x2,double y2,double x3,double y3) {
- outpos +=
- sprintf(outpos,"\n %12.3f %12.3f %12.3f %12.3f %12.3f %12.3f c",x1,y1,x2,y2,x3,y3);
+ sprintf(outputbuffer,"\n %12.3f %12.3f %12.3f %12.3f %12.3f %12.3f c",x1,y1,x2,y2,x3,y3);
+ sendClean(outputbuffer);
}
void LineTo(double x1,double y1) {
- outpos +=
- sprintf(outpos,"\n %12.3f %12.3f l",x1,y1);
+ sprintf(outputbuffer,"\n %12.3f %12.3f l",x1,y1);
+ sendClean(outputbuffer);
}
void MoveTo(double x1,double y1) {
- outpos +=
- sprintf(outpos,"\n %12.3f %12.3f m",x1,y1);
+ sprintf(outputbuffer,"\n %12.3f %12.3f m",x1,y1);
+ sendClean(outputbuffer);
}
void SetLineWidth(double w) {
- outpos +=
- sprintf(outpos," %12.3f w",w);
+ sprintf(outputbuffer," %12.3f w",w);
+ sendClean(outputbuffer);
}
void SetDashSize(double dashsize,double phase) {
- if ( dashsize ) outpos += sprintf(outpos," [%12.3f] %12.3f d",dashsize,phase);
- else outpos += sprintf(outpos," [] 0 d");
+ if ( dashsize ) {
+ sprintf(outputbuffer," [%12.3f] %12.3f d",dashsize,phase);
+ sendClean(outputbuffer);
+ }
+ else send(" [] 0 d");
}
void SetTransferMatrix(double x11,double x12,double x21,double x22,double x,double y)
@@ -370,8 +382,8 @@
if ( ( fabs(x11-1.) > 0.001 ) || ( fabs(x22-1.) > 0.001 )
|| ( fabs(x12) > 0.001 ) || ( fabs(x21) > 0.001 )
|| ( fabs(x) > 0.001 ) || ( fabs(y) > 0.001 ) ) {
- outpos +=
- sprintf(outpos,"%12.3f %12.3f %12.3f %12.3f %12.3f %12.3f cm\n",x11,x12,x21,x22,x,y);
+ sprintf(outputbuffer,"%12.3f %12.3f %12.3f %12.3f %12.3f %12.3f cm\n",x11,x12,x21,x22,x,y);
+ sendClean(outputbuffer);
}
}
@@ -379,6 +391,7 @@
void BezierCircle(double r,char *action)
{
+ char *outpos = outputbuffer;
outpos +=
sprintf(outpos," %12.3f 0 m %12.3f %12.3f %12.3f %12.3f 0 %12.3f c\n",-r,-r,r*BzK,-r*BzK,r,r);
outpos +=
@@ -387,10 +400,12 @@
sprintf(outpos," %12.3f %12.3f %12.3f %12.3f 0 %12.3f c\n",r,-r*BzK,r*BzK,-r,-r);
outpos +=
sprintf(outpos," %12.3f %12.3f %12.3f %12.3f %12.3f 0 c %s\n",-r*BzK,-r,-r,-r*BzK,-r,action);
+ sendClean(outputbuffer);
}
void BezierOval(double w, double h, char *action)
{
+ char *outpos = outputbuffer;
outpos +=
sprintf(outpos," %12.3f 0 m %12.3f %12.3f %12.3f %12.3f 0 %12.3f c\n",-w,-w,h*BzK,-w*BzK,h,h);
outpos +=
@@ -399,41 +414,45 @@
sprintf(outpos," %12.3f %12.3f %12.3f %12.3f 0 %12.3f c\n",w,-h*BzK,w*BzK,-h,-h);
outpos +=
sprintf(outpos," %12.3f %12.3f %12.3f %12.3f %12.3f 0 c %s\n",-w*BzK,-h,-w,-h*BzK,-w,action);
+ sendClean(outputbuffer);
}
void SetGray(double grayscale,int par)
{
if ( par == STROKING ) {
- outpos += sprintf(outpos," %12.3f G",grayscale);
+ sprintf(outputbuffer," %12.3f G",grayscale);
}
else {
- outpos += sprintf(outpos," %12.3f g",grayscale);
+ sprintf(outputbuffer," %12.3f g",grayscale);
}
+ sendClean(outputbuffer);
}
void SetColor(double c, double m, double y, double k,int par)
{
if ( par == STROKING ) {
- outpos += sprintf(outpos," %12.3f %12.3f %12.3f %12.3f K",c,m,y,k);
+ sprintf(outputbuffer," %12.3f %12.3f %12.3f %12.3f K",c,m,y,k);
}
else {
- outpos += sprintf(outpos," %12.3f %12.3f %12.3f %12.3f k",c,m,y,k);
+ sprintf(outputbuffer," %12.3f %12.3f %12.3f %12.3f k",c,m,y,k);
}
+ sendClean(outputbuffer);
}
void SetBackgroundColor(int par)
{
- if ( par == STROKING ) { outpos += sprintf(outpos," 0 0 0 0 K"); }
- else { outpos += sprintf(outpos," 0 0 0 0 k"); }
+ if ( par == STROKING ) { send(" 0 0 0 0 K"); }
+ else { send(" 0 0 0 0 k"); }
}
void Rectangle(double x,double y,double w,double h) {
- outpos += sprintf(outpos,"\n %12.3f %12.3f %12.3f %12.3f re",x,y,w,h);
+ sprintf(outputbuffer,"\n %12.3f %12.3f %12.3f %12.3f re",x,y,w,h);
+ sendClean(outputbuffer);
}
void Triangle(double x1,double y1,double x2,double y2,double x3,double y3) {
- outpos +=
- sprintf(outpos,"\n %12.3f %12.3f m %12.3f %12.3f l %12.3f %12.3f l h",x1,y1,x2,y2,x3,y3);
+ sprintf(outputbuffer,"\n %12.3f %12.3f m %12.3f %12.3f l %12.3f %12.3f l h",x1,y1,x2,y2,x3,y3);
+ sendClean(outputbuffer);
}
/*
@@ -503,10 +522,10 @@
LineTo(-length*0.5,-arrow.width);
if (k == 1) {
SetBackgroundColor(NONSTROKING);
- outpos += sprintf(outpos," h f");
+ send(" h f");
}
else {
- outpos += sprintf(outpos," s");
+ send(" s");
}
RestoreGraphicsState;
}
@@ -516,7 +535,7 @@
LineTo(-length*0.5,arrow.width);
LineTo(-length*0.5+length*arrow.inset,0);
LineTo(-length*0.5,-arrow.width);
- outpos += sprintf(outpos," h f");
+ send(" h f");
}
RestoreGraphicsState;
}
@@ -928,17 +947,17 @@
char *buffer;
if ( ( finput = fopen(filename,"r") ) == 0 ) {
fprintf(stderr,"%s: Cannot open file %s\n",axohelp,filename);
- exit(-1);
+ exit(1);
}
if ( ( fseek(finput,0,SEEK_END) != 0 )
|| ( ( filesize = ftell(finput) ) < 0 )
|| ( fseek(finput,0,SEEK_SET) != 0 ) ) {
fprintf(stderr,"%s: File error in file %s\n",axohelp,filename);
- exit(-1);
+ exit(1);
}
if ( ( buffer = malloc((filesize+1)*sizeof(char)) ) == 0 ) {
fprintf(stderr,"%s: Error allocating %ld bytes of memory",axohelp,filesize+1);
- exit(-1);
+ exit(1);
}
/*
Assume character in file is 1 byte, which is true for all cases
@@ -947,7 +966,7 @@
num = fread( buffer, 1, filesize, finput );
if ( ferror(finput) ) {
fprintf(stderr,"%s: Error reading file %s\n",axohelp,filename);
- exit(-1);
+ exit(1);
}
/*
By definition, fread reads ALL the items specified, or it gets to
@@ -974,31 +993,37 @@
char *s, *t;
int period = 0;
s = t = str;
- while ( *s && *s != '}' ) {
- if ( *s == '\n' ) *s = ' ';
- if ( ( *s == ' ' || *s == '\n' ) && ( s[1] == ' ' || s[1] == '\n' ) ) s++;
- else *t++ = *s++;
+ // Collapse multiple white space (' ' and '\n') to one. Remove trailing space.
+ while ( *s ) {
+ if ( *s == '\n' ) {*s = ' '; }
+ if ( (*s == ' ') && ( s[1] == ' ' || s[1] == '\n' || s[1] == 0 ) ) { s++;}
+ else { *t++ = *s++; }
}
- while ( *s ) *t++ = *s++;
*t = 0;
+
+ // Optimize format of numbers:
s = t = str;
while ( *s ) {
if ( *s == '.' ) { period = 1; *t++ = *s++; }
- else if ( *s == '-' && s[1] == '0' && s[2] == ' ' ) { s++; }
- else if ( *s <= '9' && *s >= '0' ) { *t++ = *s++; }
- else if ( *s == '\n' && ( t > str && t[-1] == '\n' ) ) { s++; }
+ else if ( isdigit(*s) ) { *t++ = *s++; }
else if ( period ) {
- while ( t > str && t[-1] == '0' ) t--;
- if ( t > str && t[-1] == '.' ) t--;
- while ( *s == ' ' && s[1] == ' ' ) s++;
+ while ( t > str && t[-1] == '0' ) { t--; }
+ if ( t > str && t[-1] == '.' ) {
+ t--;
+ // Handle case that number is .000, not e.g. 9.000
+ if (t > str && ! isdigit(t[-1]) ) {
+ *t++ = '0';
+ }
+ }
period = 0; *t++ = *s++;
}
- else if ( *s == ' ' && s[1] == ' ' ) s++;
else {
period = 0; *t++ = *s++;
}
}
*t = 0;
+
+ // Collapse '-0' to '0'
s = t = str;
while ( *s ) {
if ( *s == '-' && s[1] == '0' && s[2] == ' ' ) { s++; }
@@ -1008,53 +1033,75 @@
}
/*
- #] CleanupOutput :
+ #] CleanupOutput :
+ #[ send :
+*/
+
+void send( char* str ) {
+ fprintf(outfile, "%s",str);
+}
+
+/*
+ #] CleanupOutput :
+ #[ sendClean :
+*/
+
+void sendClean( char* str ) {
+ CleanupOutput(str);
+ send(str);
+}
+
+/*
+ #] sendClean :
#[ DoOneObject :
*/
int DoOneObject(char *cinput)
{
- int num, i, num1, num2;
- char *s, *t, *StartClean;
+ // Single point for exit, to ensure proper clean up.
+ int num, i, num1, num2, retcode;
+ char *s, *t;
double *argbuf = 0;
+ retcode = -1;
SetDefaults();
+
+ // Locate number of object:
s = cinput; while ( *s != '[' ) s++;
s++; t = s; while ( *t != ']' ) t++;
*t++ = 0; while ( *t == ' ' || *t == '\t' || *t == '\n' ) t++;
+
+ fprintf(outfile,"\\axo at setObject{%s}%%\n{%s%c}%%\n{",s,t,TERMCHAR);
outpos = outputbuffer;
- outpos += sprintf(outpos,"\\axo at setObject{%s}%%\n{%s%c}%%\n{",s,t,TERMCHAR);
- if ( *s == '0' && s[1] == ']' ) {
+
+ nameobject = t; while ( *t != ' ' && *t != '\t' && *t != '\n' && *t ) t++;
+ *t++ = 0; while ( *t == ' ' || *t == '\t' || *t == '\n' ) t++;
/*
+ Now nameobject is the name of the command and t points at the first parameter.
+*/
+
+ if ( *s == '0' && s[1] == 0 ) {
+/*
The identification line.
In due time we might add more options here.
*/
if ( strcmp(nameobject,"AxodrawWantsPDF") == 0 ) {
identification = 1;
- outpos += sprintf(outpos,"Axohelp version %d.%d. PDF output.}",VERSION,SUBVERSION);
- fprintf(outfile,"%s",outputbuffer);
- return(0);
+ fprintf(outfile,"Axohelp version %d.%d. PDF output.",VERSION,SUBVERSION);
+ goto SUCCESS;
}
else {
fprintf(stderr,"%s: Illegal request in identification string [0]: %s\n"
,axohelp,nameobject);
- if ( argbuf ) free(argbuf);
- return(-1);
+ goto EXIT;
}
}
/*
if ( identification == 0 ) {
fprintf(stderr,"%s: No identification string. Check versions.\n",axohelp);
- if ( argbuf ) free(argbuf);
- return(-1);
+ goto EXIT;
}
*/
- StartClean = outpos;
- nameobject = t; while ( *t != ' ' && *t != '\t' && *t != '\n' && *t ) t++;
- *t++ = 0; while ( *t == ' ' || *t == '\t' || *t == '\n' ) t++;
-/*
- Now nameobject is the name of the command and t points at the first parameter.
-*/
if ( ( strcmp(nameobject,"Curve") == 0 )
|| ( strcmp(nameobject,"Polygon") == 0 )
|| ( strcmp(nameobject,"FilledPolygon") == 0 ) ) {
@@ -1061,12 +1108,12 @@
/*
#[ Curve,Polygons :
*/
- if ( ( argbuf = ReadArray(t,&num1,&num2) ) == 0 ) return(-1);
+ if ( ( argbuf = ReadArray(t,&num1,&num2) ) == 0 )
+ goto EXIT;
if ( num2-1 != 0 ) {
fprintf(stderr,"%s: Command %s should have no extra numbers in %s.\n",
axohelp,nameobject,inname);
- free(argbuf);
- return(-1);
+ goto EXIT;
}
else {
/*
@@ -1087,6 +1134,7 @@
Polygon(argbuf,num1,1);
}
free(argbuf);
+ argbuf = 0;
}
/*
#] Curve,Polygons :
@@ -1096,12 +1144,12 @@
/*
#[ DashCurve :
*/
- if ( ( argbuf = ReadArray(t,&num1,&num2) ) == 0 ) return(-1);
+ if ( ( argbuf = ReadArray(t,&num1,&num2) ) == 0 )
+ goto EXIT;
if ( num2 != 2 ) {
fprintf(stderr,"%s: Command %s does not have two numbers after the coordinates\n in file %s.\n",
axohelp,nameobject,inname);
- free(argbuf);
- return(-1);
+ goto EXIT;
}
else {
/*
@@ -1114,6 +1162,7 @@
SetLineWidth(axolinewidth);
DashCurve(argbuf,num1);
free(argbuf);
+ argbuf = 0;
}
/*
#] DashCurve :
@@ -1123,7 +1172,8 @@
/*
#[ Regular command :
*/
- if ( ( argbuf = ReadTail(t,&num) ) == 0 ) return(-1);
+ if ( ( argbuf = ReadTail(t,&num) ) == 0 )
+ goto EXIT;
for ( i = 0; i < sizeof(commands)/sizeof(KEYWORD); i++ ) {
if ( strcmp(nameobject,commands[i].name) == 0 ) {
if ( num == commands[i].numargs+1 ) {
@@ -1137,13 +1187,13 @@
SetLineWidth(axolinewidth);
(*(commands[i].func))(argbuf);
free(argbuf);
+ argbuf = 0;
break;
}
else {
fprintf(stderr,"%s: Command %s should have %d(+1) arguments in %s.\n"
,axohelp,nameobject,commands[i].numargs,inname);
- free(argbuf);
- return(-1);
+ goto EXIT;
}
}
}
@@ -1153,14 +1203,15 @@
if ( i >= sizeof(commands)/sizeof(KEYWORD) ) {
fprintf(stderr,"%s: Command %s not recognized in file %s.\n",
axohelp,nameobject,inname);
- free(argbuf);
- return(-1);
+ goto EXIT;
}
}
- outpos += sprintf(outpos,"}\n");
- CleanupOutput(StartClean);
- fprintf(outfile,"%s",outputbuffer);
- return(0);
+ SUCCESS:
+ retcode = 0;
+ EXIT:
+ if (argbuf) { free(argbuf); }
+ fprintf(outfile,"}\n");
+ return(retcode);
}
/*
@@ -1219,7 +1270,7 @@
axohelp = *argv++;
if ( argc <= 0 ) {
PrintHelp(axohelp);
- return -1;
+ return 1;
}
while ( (*argv)[0] == '-' ) { /* we have options */
s = *argv;
@@ -1246,19 +1297,19 @@
else {
fprintf(stderr,"%s: Illegal option %s\n", axohelp, *argv);
PrintHelpPrompt(axohelp);
- return -1;
+ return 1;
}
argc--; argv++;
if ( argc <= 0 ) {
fprintf(stderr,"%s: Not enough arguments\n",axohelp);
PrintHelpPrompt(axohelp);
- return -1;
+ return 1;
}
}
if ( argc != 1 ) {
fprintf(stderr,"%s: Too many arguments\n",axohelp);
PrintHelpPrompt(axohelp);
- return -1;
+ return 1;
}
/*
The filename is now in s. We copy it to a separate string and
@@ -1276,10 +1327,10 @@
strcpy( inname+length, ".ax1" );
strcpy( outname+length, ".ax2" );
}
- if ( ( inbuffer = ReadInput(inname) ) == 0 ) return(-1);
+ if ( ( inbuffer = ReadInput(inname) ) == 0 ) return(1);
if ( ( outfile = fopen(outname,"w") ) == 0 ) {
fprintf(stderr,"%s: Cannot create file %s\n",axohelp,outname);
- exit(-1);
+ exit(1);
}
num = ScanForObjects(inbuffer);
for ( i = 0; i < num; i++ ) {
@@ -1290,7 +1341,7 @@
if ( error > 0 ) {
fprintf(stderr,"%s: %d objects in %s were not translated correctly.\n",
axohelp,error,inname);
- return(-1);
+ return(1);
}
return(0);
}
Modified: trunk/Build/source/utils/axodraw2/axodraw2-src/axohelp.test
===================================================================
--- trunk/Build/source/utils/axodraw2/axodraw2-src/axohelp.test 2019-09-06 21:14:35 UTC (rev 52041)
+++ trunk/Build/source/utils/axodraw2/axodraw2-src/axohelp.test 2019-09-06 22:26:30 UTC (rev 52042)
@@ -6,6 +6,9 @@
# This test is a rudimentary test of axohelp in a form suitable for
# use in TeXLive builds.
+# Prevent errors from sed if it encounters non-UTF-8 strings in utf-8 locale
+LC_ALL=C; export LC_ALL; LANGUAGE=C; export LANGUAGE
+
if test -z "$test_srcdir"; then
# If not set, then we are not running from `make check'.
test_srcdir=`echo "$0" | sed -e 's,/[^\\/]*$,,'` # == dirname $0
Modified: trunk/Build/source/utils/axodraw2/axodraw2-src/test-big.ax2-std
===================================================================
--- trunk/Build/source/utils/axodraw2/axodraw2-src/test-big.ax2-std 2019-09-06 21:14:35 UTC (rev 52041)
+++ trunk/Build/source/utils/axodraw2/axodraw2-src/test-big.ax2-std 2019-09-06 22:26:30 UTC (rev 52042)
@@ -15,13 +15,13 @@
{ 0.5 w 0.5 w 1 0 0 1 0 50 cm 12 -5 m 16.5 -5 16.5 5 8.4 5 c 3 5 0.6 2.5 0 0 c S 12 -5 m 7.5 -5 7.5 5 18 5 c 28.5 5 28.5 -5 24 -5 c 19.5 -5 19.5 5 30 5 c 40.5 5 40.5 -5 36 -5 c 31.5 -5 31.5 5 42 5 c 52.5 5 52.5 -5 48 -5 c 43.5 -5 43.5 5 51.6 5 c 57 5 59.4 2.5 60 0 c S}
\axo at setObject{6}%
{Vertex 60 50 2 0.5;}%
-{ 0.5 w 1 0 0 1 60 50 cm -2 0 m -2 1.105 -1.105 2 0 2 c 1.105 2 2 1.105 2 0 c 2 -1.105 1.105 -2 0 -2 c -1.105 -2 -2 -1.105 -2 0 c f }
+{ 0.5 w 1 0 0 1 60 50 cm -2 0 m -2 1.105 -1.105 2 0 2 c 1.105 2 2 1.105 2 0 c 2 -1.105 1.105 -2 0 -2 c -1.105 -2 -2 -1.105 -2 0 c f}
\axo at setObject{7}%
{AxoGluon 140 50 200 50 5 4 0 0 0.5;}%
{ 0.5 w 0.5 w 1 0 0 1 140 50 cm 12 -5 m 16.5 -5 16.5 5 8.4 5 c 3 5 0.6 2.5 0 0 c S 12 -5 m 7.5 -5 7.5 5 18 5 c 28.5 5 28.5 -5 24 -5 c 19.5 -5 19.5 5 30 5 c 40.5 5 40.5 -5 36 -5 c 31.5 -5 31.5 5 42 5 c 52.5 5 52.5 -5 48 -5 c 43.5 -5 43.5 5 51.6 5 c 57 5 59.4 2.5 60 0 c S}
\axo at setObject{8}%
{Vertex 140 50 2 0.5;}%
-{ 0.5 w 1 0 0 1 140 50 cm -2 0 m -2 1.105 -1.105 2 0 2 c 1.105 2 2 1.105 2 0 c 2 -1.105 1.105 -2 0 -2 c -1.105 -2 -2 -1.105 -2 0 c f }
+{ 0.5 w 1 0 0 1 140 50 cm -2 0 m -2 1.105 -1.105 2 0 2 c 1.105 2 2 1.105 2 0 c 2 -1.105 1.105 -2 0 -2 c -1.105 -2 -2 -1.105 -2 0 c f}
\axo at setObject{9}%
{Grid 0 0 10 10 9 14 0.5;}%
{ 0.5 w 0 0 m 0 140 l S 10 0 m 10 140 l S 20 0 m 20 140 l S 30 0 m 30 140 l S 40 0 m 40 140 l S 50 0 m 50 140 l S 60 0 m 60 140 l S 70 0 m 70 140 l S 80 0 m 80 140 l S 90 0 m 90 140 l S 0 0 m 90 0 l S 0 10 m 90 10 l S 0 20 m 90 20 l S 0 30 m 90 30 l S 0 40 m 90 40 l S 0 50 m 90 50 l S 0 60 m 90 60 l S 0 70 m 90 70 l S 0 80 m 90 80 l S 0 90 m 90 90 l S 0 100 m 90 100 l S 0 110 m 90 110 l S 0 120 m 90 120 l S 0 130 m 90 130 l S 0 140 m 90 140 l S}
@@ -357,7 +357,7 @@
{ 0.5 w 1 0 0 1 40 10 cm 0 1 -1 0 0 0 cm 0 0 m 2.122 5.333 2.878 5.333 5 0 c 7.122 -5.333 7.878 -5.333 10 0 c 12.122 5.333 12.878 5.333 15 0 c 17.122 -5.333 17.878 -5.333 20 0 c 22.122 5.333 22.878 5.333 25 0 c 27.122 -5.333 27.878 -5.333 30 0 c S}
\axo at setObject{120}%
{Vertex 40 10 1.5 0.5;}%
-{ 0.5 w 1 0 0 1 40 10 cm -1.5 0 m -1.5 0.828 -0.828 1.5 0 1.5 c 0.828 1.5 1.5 0.828 1.5 0 c 1.5 -0.828 0.828 -1.5 0 -1.5 c -0.828 -1.5 -1.5 -0.828 -1.5 0 c f }
+{ 0.5 w 1 0 0 1 40 10 cm -1.5 0 m -1.5 0.828 -0.828 1.5 0 1.5 c 0.828 1.5 1.5 0.828 1.5 0 c 1.5 -0.828 0.828 -1.5 0 -1.5 c -0.828 -1.5 -1.5 -0.828 -1.5 0 c f}
\axo at setObject{121}%
{Grid 0 0 10 10 6 6 0.5;}%
{ 0.5 w 0 0 m 0 60 l S 10 0 m 10 60 l S 20 0 m 20 60 l S 30 0 m 30 60 l S 40 0 m 40 60 l S 50 0 m 50 60 l S 60 0 m 60 60 l S 0 0 m 60 0 l S 0 10 m 60 10 l S 0 20 m 60 20 l S 0 30 m 60 30 l S 0 40 m 60 40 l S 0 50 m 60 50 l S 0 60 m 60 60 l S}
@@ -366,7 +366,7 @@
{ 0.5 w 0 0 m 60 60 l S}
\axo at setObject{123}%
{ECirc 30 30 20 0.5;}%
-{ 0.5 w 1 0 0 1 30 30 cm -20 0 m -20 11.046 -11.046 20 0 20 c 11.046 20 20 11.046 20 0 c 20 -11.046 11.046 -20 0 -20 c -11.046 -20 -20 -11.046 -20 0 c S }
+{ 0.5 w 1 0 0 1 30 30 cm -20 0 m -20 11.046 -11.046 20 0 20 c 11.046 20 20 11.046 20 0 c 20 -11.046 11.046 -20 0 -20 c -11.046 -20 -20 -11.046 -20 0 c S}
\axo at setObject{124}%
{Grid 0 0 10 10 6 6 0.5;}%
{ 0.5 w 0 0 m 0 60 l S 10 0 m 10 60 l S 20 0 m 20 60 l S 30 0 m 30 60 l S 40 0 m 40 60 l S 50 0 m 50 60 l S 60 0 m 60 60 l S 0 0 m 60 0 l S 0 10 m 60 10 l S 0 20 m 60 20 l S 0 30 m 60 30 l S 0 40 m 60 40 l S 0 50 m 60 50 l S 0 60 m 60 60 l S}
@@ -375,10 +375,10 @@
{ 0.5 w 0 0 m 60 60 l S}
\axo at setObject{126}%
{Vertex 30 30 20 0.5;}%
-{ 0.5 w 1 0 0 1 30 30 cm -20 0 m -20 11.046 -11.046 20 0 20 c 11.046 20 20 11.046 20 0 c 20 -11.046 11.046 -20 0 -20 c -11.046 -20 -20 -11.046 -20 0 c f }
+{ 0.5 w 1 0 0 1 30 30 cm -20 0 m -20 11.046 -11.046 20 0 20 c 11.046 20 20 11.046 20 0 c 20 -11.046 11.046 -20 0 -20 c -11.046 -20 -20 -11.046 -20 0 c f}
\axo at setObject{127}%
{ECirc 30 30 20 0.5;}%
-{ 0.5 w 1 0 0 1 30 30 cm -20 0 m -20 11.046 -11.046 20 0 20 c 11.046 20 20 11.046 20 0 c 20 -11.046 11.046 -20 0 -20 c -11.046 -20 -20 -11.046 -20 0 c S }
+{ 0.5 w 1 0 0 1 30 30 cm -20 0 m -20 11.046 -11.046 20 0 20 c 11.046 20 20 11.046 20 0 c 20 -11.046 11.046 -20 0 -20 c -11.046 -20 -20 -11.046 -20 0 c S}
\axo at setObject{128}%
{AxoLine 60 0 0 60 0 0 0 0 0 0 0 0 0 0 0 0.5;}%
{ 0.5 w 60 0 m 0 60 l S}
@@ -390,10 +390,10 @@
{ 0.5 w 0 0 m 60 60 l S}
\axo at setObject{131}%
{Vertex 30 30 20 0.5;}%
-{ 0.5 w 1 0 0 1 30 30 cm -20 0 m -20 11.046 -11.046 20 0 20 c 11.046 20 20 11.046 20 0 c 20 -11.046 11.046 -20 0 -20 c -11.046 -20 -20 -11.046 -20 0 c f }
+{ 0.5 w 1 0 0 1 30 30 cm -20 0 m -20 11.046 -11.046 20 0 20 c 11.046 20 20 11.046 20 0 c 20 -11.046 11.046 -20 0 -20 c -11.046 -20 -20 -11.046 -20 0 c f}
\axo at setObject{132}%
{ECirc 30 30 20 0.5;}%
-{ 0.5 w 1 0 0 1 30 30 cm -20 0 m -20 11.046 -11.046 20 0 20 c 11.046 20 20 11.046 20 0 c 20 -11.046 11.046 -20 0 -20 c -11.046 -20 -20 -11.046 -20 0 c S }
+{ 0.5 w 1 0 0 1 30 30 cm -20 0 m -20 11.046 -11.046 20 0 20 c 11.046 20 20 11.046 20 0 c 20 -11.046 11.046 -20 0 -20 c -11.046 -20 -20 -11.046 -20 0 c S}
\axo at setObject{133}%
{AxoLine 60 0 0 60 0 0 0 0 0 0 0 0 0 0 0 0.5;}%
{ 0.5 w 60 0 m 0 60 l S}
@@ -405,10 +405,10 @@
{ 0.5 w 0 0 m 60 60 l S}
\axo at setObject{136}%
{Vertex 30 30 20 0.5;}%
-{ 0.5 w 1 0 0 1 30 30 cm -20 0 m -20 11.046 -11.046 20 0 20 c 11.046 20 20 11.046 20 0 c 20 -11.046 11.046 -20 0 -20 c -11.046 -20 -20 -11.046 -20 0 c f }
+{ 0.5 w 1 0 0 1 30 30 cm -20 0 m -20 11.046 -11.046 20 0 20 c 11.046 20 20 11.046 20 0 c 20 -11.046 11.046 -20 0 -20 c -11.046 -20 -20 -11.046 -20 0 c f}
\axo at setObject{137}%
{ECirc 30 30 20 0.5;}%
-{ 0.5 w 1 0 0 1 30 30 cm -20 0 m -20 11.046 -11.046 20 0 20 c 11.046 20 20 11.046 20 0 c 20 -11.046 11.046 -20 0 -20 c -11.046 -20 -20 -11.046 -20 0 c S }
+{ 0.5 w 1 0 0 1 30 30 cm -20 0 m -20 11.046 -11.046 20 0 20 c 11.046 20 20 11.046 20 0 c 20 -11.046 11.046 -20 0 -20 c -11.046 -20 -20 -11.046 -20 0 c S}
\axo at setObject{138}%
{AxoLine 60 0 0 60 0 0 0 0 0 0 0 0 0 0 0 0.5;}%
{ 0.5 w 60 0 m 0 60 l S}
@@ -417,16 +417,16 @@
{ 0.5 w 0 0 m 0 110 l S 10 0 m 10 110 l S 20 0 m 20 110 l S 30 0 m 30 110 l S 40 0 m 40 110 l S 50 0 m 50 110 l S 60 0 m 60 110 l S 70 0 m 70 110 l S 80 0 m 80 110 l S 0 0 m 80 0 l S 0 10 m 80 10 l S 0 20 m 80 20 l S 0 30 m 80 30 l S 0 40 m 80 40 l S 0 50 m 80 50 l S 0 60 m 80 60 l S 0 70 m 80 70 l S 0 80 m 80 80 l S 0 90 m 80 90 l S 0 100 m 80 100 l S 0 110 m 80 110 l S}
\axo at setObject{140}%
{Oval 40 80 20 30 0 0.5;}%
-{ 0.5 w 1 0 0 1 40 80 cm -30 0 m -30 11.046 -16.569 20 0 20 c 16.569 20 30 11.046 30 0 c 30 -11.046 16.569 -20 0 -20 c -16.569 -20 -30 -11.046 -30 0 c S }
+{ 0.5 w 1 0 0 1 40 80 cm -30 0 m -30 11.046 -16.569 20 0 20 c 16.569 20 30 11.046 30 0 c 30 -11.046 16.569 -20 0 -20 c -16.569 -20 -30 -11.046 -30 0 c S}
\axo at setObject{141}%
{Oval 40 30 20 30 30 0.5;}%
-{ 0.5 w 1 0 0 1 40 30 cm 0.866 0.5 -0.5 0.866 0 0 cm -30 0 m -30 11.046 -16.569 20 0 20 c 16.569 20 30 11.046 30 0 c 30 -11.046 16.569 -20 0 -20 c -16.569 -20 -30 -11.046 -30 0 c S }
+{ 0.5 w 1 0 0 1 40 30 cm 0.866 0.5 -0.5 0.866 0 0 cm -30 0 m -30 11.046 -16.569 20 0 20 c 16.569 20 30 11.046 30 0 c 30 -11.046 16.569 -20 0 -20 c -16.569 -20 -30 -11.046 -30 0 c S}
\axo at setObject{142}%
{Grid 0 0 10 10 8 6 0.5;}%
{ 0.5 w 0 0 m 0 60 l S 10 0 m 10 60 l S 20 0 m 20 60 l S 30 0 m 30 60 l S 40 0 m 40 60 l S 50 0 m 50 60 l S 60 0 m 60 60 l S 70 0 m 70 60 l S 80 0 m 80 60 l S 0 0 m 80 0 l S 0 10 m 80 10 l S 0 20 m 80 20 l S 0 30 m 80 30 l S 0 40 m 80 40 l S 0 50 m 80 50 l S 0 60 m 80 60 l S}
\axo at setObject{143}%
{FOval 40 30 20 30 30 0.5;}%
-{ 0.5 w 1 0 0 1 40 30 cm 0.866 0.5 -0.5 0.866 0 0 cm -30 0 m -30 11.046 -16.569 20 0 20 c 16.569 20 30 11.046 30 0 c 30 -11.046 16.569 -20 0 -20 c -16.569 -20 -30 -11.046 -30 0 c f -30 0 m -30 11.046 -16.569 20 0 20 c 16.569 20 30 11.046 30 0 c 30 -11.046 16.569 -20 0 -20 c -16.569 -20 -30 -11.046 -30 0 c S }
+{ 0.5 w 1 0 0 1 40 30 cm 0.866 0.5 -0.5 0.866 0 0 cm -30 0 m -30 11.046 -16.569 20 0 20 c 16.569 20 30 11.046 30 0 c 30 -11.046 16.569 -20 0 -20 c -16.569 -20 -30 -11.046 -30 0 c f -30 0 m -30 11.046 -16.569 20 0 20 c 16.569 20 30 11.046 30 0 c 30 -11.046 16.569 -20 0 -20 c -16.569 -20 -30 -11.046 -30 0 c S}
\axo at setObject{144}%
{Grid 0 0 10 10 8 6 0.5;}%
{ 0.5 w 0 0 m 0 60 l S 10 0 m 10 60 l S 20 0 m 20 60 l S 30 0 m 30 60 l S 40 0 m 40 60 l S 50 0 m 50 60 l S 60 0 m 60 60 l S 70 0 m 70 60 l S 80 0 m 80 60 l S 0 0 m 80 0 l S 0 10 m 80 10 l S 0 20 m 80 20 l S 0 30 m 80 30 l S 0 40 m 80 40 l S 0 50 m 80 50 l S 0 60 m 80 60 l S}
@@ -435,10 +435,10 @@
{ 0.5 w 0 0 m 80 60 l S}
\axo at setObject{146}%
{FOval 40 30 20 30 0 0.5;}%
-{ 0.5 w 1 0 0 1 40 30 cm -30 0 m -30 11.046 -16.569 20 0 20 c 16.569 20 30 11.046 30 0 c 30 -11.046 16.569 -20 0 -20 c -16.569 -20 -30 -11.046 -30 0 c f -30 0 m -30 11.046 -16.569 20 0 20 c 16.569 20 30 11.046 30 0 c 30 -11.046 16.569 -20 0 -20 c -16.569 -20 -30 -11.046 -30 0 c S }
+{ 0.5 w 1 0 0 1 40 30 cm -30 0 m -30 11.046 -16.569 20 0 20 c 16.569 20 30 11.046 30 0 c 30 -11.046 16.569 -20 0 -20 c -16.569 -20 -30 -11.046 -30 0 c f -30 0 m -30 11.046 -16.569 20 0 20 c 16.569 20 30 11.046 30 0 c 30 -11.046 16.569 -20 0 -20 c -16.569 -20 -30 -11.046 -30 0 c S}
\axo at setObject{147}%
{Oval 40 30 20 30 0 0.5;}%
-{ 0.5 w 1 0 0 1 40 30 cm -30 0 m -30 11.046 -16.569 20 0 20 c 16.569 20 30 11.046 30 0 c 30 -11.046 16.569 -20 0 -20 c -16.569 -20 -30 -11.046 -30 0 c S }
+{ 0.5 w 1 0 0 1 40 30 cm -30 0 m -30 11.046 -16.569 20 0 20 c 16.569 20 30 11.046 30 0 c 30 -11.046 16.569 -20 0 -20 c -16.569 -20 -30 -11.046 -30 0 c S}
\axo at setObject{148}%
{AxoLine 80 0 0 60 0 0 0 0 0 0 0 0 0 0 0 0.5;}%
{ 0.5 w 80 0 m 0 60 l S}
@@ -450,10 +450,10 @@
{ 1 w 0 0 m 80 60 l S}
\axo at setObject{151}%
{FOval 40 30 20 30 20 1;}%
-{ 1 w 1 0 0 1 40 30 cm 0.94 0.342 -0.342 0.94 0 0 cm -30 0 m -30 11.046 -16.569 20 0 20 c 16.569 20 30 11.046 30 0 c 30 -11.046 16.569 -20 0 -20 c -16.569 -20 -30 -11.046 -30 0 c f -30 0 m -30 11.046 -16.569 20 0 20 c 16.569 20 30 11.046 30 0 c 30 -11.046 16.569 -20 0 -20 c -16.569 -20 -30 -11.046 -30 0 c S }
+{ 1 w 1 0 0 1 40 30 cm 0.94 0.342 -0.342 0.94 0 0 cm -30 0 m -30 11.046 -16.569 20 0 20 c 16.569 20 30 11.046 30 0 c 30 -11.046 16.569 -20 0 -20 c -16.569 -20 -30 -11.046 -30 0 c f -30 0 m -30 11.046 -16.569 20 0 20 c 16.569 20 30 11.046 30 0 c 30 -11.046 16.569 -20 0 -20 c -16.569 -20 -30 -11.046 -30 0 c S}
\axo at setObject{152}%
{Oval 40 30 20 30 20 1;}%
-{ 1 w 1 0 0 1 40 30 cm 0.94 0.342 -0.342 0.94 0 0 cm -30 0 m -30 11.046 -16.569 20 0 20 c 16.569 20 30 11.046 30 0 c 30 -11.046 16.569 -20 0 -20 c -16.569 -20 -30 -11.046 -30 0 c S }
+{ 1 w 1 0 0 1 40 30 cm 0.94 0.342 -0.342 0.94 0 0 cm -30 0 m -30 11.046 -16.569 20 0 20 c 16.569 20 30 11.046 30 0 c 30 -11.046 16.569 -20 0 -20 c -16.569 -20 -30 -11.046 -30 0 c S}
\axo at setObject{153}%
{AxoLine 80 0 0 60 0 0 0 0 0 0 0 0 0 0 0 1;}%
{ 1 w 80 0 m 0 60 l S}
@@ -609,37 +609,37 @@
{ 0.5 w 0 0 m 0 90 l S 10 0 m 10 90 l S 20 0 m 20 90 l S 30 0 m 30 90 l S 40 0 m 40 90 l S 50 0 m 50 90 l S 60 0 m 60 90 l S 70 0 m 70 90 l S 80 0 m 80 90 l S 90 0 m 90 90 l S 0 0 m 90 0 l S 0 10 m 90 10 l S 0 20 m 90 20 l S 0 30 m 90 30 l S 0 40 m 90 40 l S 0 50 m 90 50 l S 0 60 m 90 60 l S 0 70 m 90 70 l S 0 80 m 90 80 l S 0 90 m 90 90 l S}
\axo at setObject{204}%
{Vertex 10 10 1.5 0.5;}%
-{ 0.5 w 1 0 0 1 10 10 cm -1.5 0 m -1.5 0.828 -0.828 1.5 0 1.5 c 0.828 1.5 1.5 0.828 1.5 0 c 1.5 -0.828 0.828 -1.5 0 -1.5 c -0.828 -1.5 -1.5 -0.828 -1.5 0 c f }
+{ 0.5 w 1 0 0 1 10 10 cm -1.5 0 m -1.5 0.828 -0.828 1.5 0 1.5 c 0.828 1.5 1.5 0.828 1.5 0 c 1.5 -0.828 0.828 -1.5 0 -1.5 c -0.828 -1.5 -1.5 -0.828 -1.5 0 c f}
\axo at setObject{205}%
{Vertex 45 45 1.5 0.5;}%
-{ 0.5 w 1 0 0 1 45 45 cm -1.5 0 m -1.5 0.828 -0.828 1.5 0 1.5 c 0.828 1.5 1.5 0.828 1.5 0 c 1.5 -0.828 0.828 -1.5 0 -1.5 c -0.828 -1.5 -1.5 -0.828 -1.5 0 c f }
+{ 0.5 w 1 0 0 1 45 45 cm -1.5 0 m -1.5 0.828 -0.828 1.5 0 1.5 c 0.828 1.5 1.5 0.828 1.5 0 c 1.5 -0.828 0.828 -1.5 0 -1.5 c -0.828 -1.5 -1.5 -0.828 -1.5 0 c f}
\axo at setObject{206}%
{Vertex 80 80 1.5 0.5;}%
-{ 0.5 w 1 0 0 1 80 80 cm -1.5 0 m -1.5 0.828 -0.828 1.5 0 1.5 c 0.828 1.5 1.5 0.828 1.5 0 c 1.5 -0.828 0.828 -1.5 0 -1.5 c -0.828 -1.5 -1.5 -0.828 -1.5 0 c f }
+{ 0.5 w 1 0 0 1 80 80 cm -1.5 0 m -1.5 0.828 -0.828 1.5 0 1.5 c 0.828 1.5 1.5 0.828 1.5 0 c 1.5 -0.828 0.828 -1.5 0 -1.5 c -0.828 -1.5 -1.5 -0.828 -1.5 0 c f}
\axo at setObject{207}%
{Grid 0 0 10 10 9 9 0.5;}%
{ 0.5 w 0 0 m 0 90 l S 10 0 m 10 90 l S 20 0 m 20 90 l S 30 0 m 30 90 l S 40 0 m 40 90 l S 50 0 m 50 90 l S 60 0 m 60 90 l S 70 0 m 70 90 l S 80 0 m 80 90 l S 90 0 m 90 90 l S 0 0 m 90 0 l S 0 10 m 90 10 l S 0 20 m 90 20 l S 0 30 m 90 30 l S 0 40 m 90 40 l S 0 50 m 90 50 l S 0 60 m 90 60 l S 0 70 m 90 70 l S 0 80 m 90 80 l S 0 90 m 90 90 l S}
\axo at setObject{208}%
{Vertex 10 10 1.5 0.5;}%
-{ 0.5 w 1 0 0 1 10 10 cm -1.5 0 m -1.5 0.828 -0.828 1.5 0 1.5 c 0.828 1.5 1.5 0.828 1.5 0 c 1.5 -0.828 0.828 -1.5 0 -1.5 c -0.828 -1.5 -1.5 -0.828 -1.5 0 c f }
+{ 0.5 w 1 0 0 1 10 10 cm -1.5 0 m -1.5 0.828 -0.828 1.5 0 1.5 c 0.828 1.5 1.5 0.828 1.5 0 c 1.5 -0.828 0.828 -1.5 0 -1.5 c -0.828 -1.5 -1.5 -0.828 -1.5 0 c f}
\axo at setObject{209}%
{Vertex 45 45 1.5 0.5;}%
-{ 0.5 w 1 0 0 1 45 45 cm -1.5 0 m -1.5 0.828 -0.828 1.5 0 1.5 c 0.828 1.5 1.5 0.828 1.5 0 c 1.5 -0.828 0.828 -1.5 0 -1.5 c -0.828 -1.5 -1.5 -0.828 -1.5 0 c f }
+{ 0.5 w 1 0 0 1 45 45 cm -1.5 0 m -1.5 0.828 -0.828 1.5 0 1.5 c 0.828 1.5 1.5 0.828 1.5 0 c 1.5 -0.828 0.828 -1.5 0 -1.5 c -0.828 -1.5 -1.5 -0.828 -1.5 0 c f}
\axo at setObject{210}%
{Vertex 80 10 1.5 0.5;}%
-{ 0.5 w 1 0 0 1 80 10 cm -1.5 0 m -1.5 0.828 -0.828 1.5 0 1.5 c 0.828 1.5 1.5 0.828 1.5 0 c 1.5 -0.828 0.828 -1.5 0 -1.5 c -0.828 -1.5 -1.5 -0.828 -1.5 0 c f }
+{ 0.5 w 1 0 0 1 80 10 cm -1.5 0 m -1.5 0.828 -0.828 1.5 0 1.5 c 0.828 1.5 1.5 0.828 1.5 0 c 1.5 -0.828 0.828 -1.5 0 -1.5 c -0.828 -1.5 -1.5 -0.828 -1.5 0 c f}
\axo at setObject{211}%
{Grid 0 0 10 10 9 9 0.5;}%
{ 0.5 w 0 0 m 0 90 l S 10 0 m 10 90 l S 20 0 m 20 90 l S 30 0 m 30 90 l S 40 0 m 40 90 l S 50 0 m 50 90 l S 60 0 m 60 90 l S 70 0 m 70 90 l S 80 0 m 80 90 l S 90 0 m 90 90 l S 0 0 m 90 0 l S 0 10 m 90 10 l S 0 20 m 90 20 l S 0 30 m 90 30 l S 0 40 m 90 40 l S 0 50 m 90 50 l S 0 60 m 90 60 l S 0 70 m 90 70 l S 0 80 m 90 80 l S 0 90 m 90 90 l S}
\axo at setObject{212}%
{Vertex 10 10 1.5 0.5;}%
-{ 0.5 w 1 0 0 1 10 10 cm -1.5 0 m -1.5 0.828 -0.828 1.5 0 1.5 c 0.828 1.5 1.5 0.828 1.5 0 c 1.5 -0.828 0.828 -1.5 0 -1.5 c -0.828 -1.5 -1.5 -0.828 -1.5 0 c f }
+{ 0.5 w 1 0 0 1 10 10 cm -1.5 0 m -1.5 0.828 -0.828 1.5 0 1.5 c 0.828 1.5 1.5 0.828 1.5 0 c 1.5 -0.828 0.828 -1.5 0 -1.5 c -0.828 -1.5 -1.5 -0.828 -1.5 0 c f}
\axo at setObject{213}%
{Vertex 45 45 1.5 0.5;}%
-{ 0.5 w 1 0 0 1 45 45 cm -1.5 0 m -1.5 0.828 -0.828 1.5 0 1.5 c 0.828 1.5 1.5 0.828 1.5 0 c 1.5 -0.828 0.828 -1.5 0 -1.5 c -0.828 -1.5 -1.5 -0.828 -1.5 0 c f }
+{ 0.5 w 1 0 0 1 45 45 cm -1.5 0 m -1.5 0.828 -0.828 1.5 0 1.5 c 0.828 1.5 1.5 0.828 1.5 0 c 1.5 -0.828 0.828 -1.5 0 -1.5 c -0.828 -1.5 -1.5 -0.828 -1.5 0 c f}
\axo at setObject{214}%
{Vertex 80 80 1.5 0.5;}%
-{ 0.5 w 1 0 0 1 80 80 cm -1.5 0 m -1.5 0.828 -0.828 1.5 0 1.5 c 0.828 1.5 1.5 0.828 1.5 0 c 1.5 -0.828 0.828 -1.5 0 -1.5 c -0.828 -1.5 -1.5 -0.828 -1.5 0 c f }
+{ 0.5 w 1 0 0 1 80 80 cm -1.5 0 m -1.5 0.828 -0.828 1.5 0 1.5 c 0.828 1.5 1.5 0.828 1.5 0 c 1.5 -0.828 0.828 -1.5 0 -1.5 c -0.828 -1.5 -1.5 -0.828 -1.5 0 c f}
\axo at setObject{215}%
{Grid 0 0 10 10 10 9 0.5;}%
{ 0.5 w 0 0 m 0 90 l S 10 0 m 10 90 l S 20 0 m 20 90 l S 30 0 m 30 90 l S 40 0 m 40 90 l S 50 0 m 50 90 l S 60 0 m 60 90 l S 70 0 m 70 90 l S 80 0 m 80 90 l S 90 0 m 90 90 l S 100 0 m 100 90 l S 0 0 m 100 0 l S 0 10 m 100 10 l S 0 20 m 100 20 l S 0 30 m 100 30 l S 0 40 m 100 40 l S 0 50 m 100 50 l S 0 60 m 100 60 l S 0 70 m 100 70 l S 0 80 m 100 80 l S 0 90 m 100 90 l S}
@@ -840,10 +840,10 @@
{ 0.5 w 0.5 w 1 0 0 1 73 30 cm 5 -3 m 7.7 -3 7.7 3 3.5 3 c 1.25 3 0.25 1.5 0 0 c S 5 -3 m 2.3 -3 2.3 3 7.5 3 c 12.7 3 12.7 -3 10 -3 c 7.3 -3 7.3 3 12.5 3 c 17.7 3 17.7 -3 15 -3 c 12.3 -3 12.3 3 16.5 3 c 18.75 3 19.75 1.5 20 0 c S}
\axo at setObject{281}%
{Vertex 27 30 1.5 0.5;}%
-{ 0.5 w 1 0 0 1 27 30 cm -1.5 0 m -1.5 0.828 -0.828 1.5 0 1.5 c 0.828 1.5 1.5 0.828 1.5 0 c 1.5 -0.828 0.828 -1.5 0 -1.5 c -0.828 -1.5 -1.5 -0.828 -1.5 0 c f }
+{ 0.5 w 1 0 0 1 27 30 cm -1.5 0 m -1.5 0.828 -0.828 1.5 0 1.5 c 0.828 1.5 1.5 0.828 1.5 0 c 1.5 -0.828 0.828 -1.5 0 -1.5 c -0.828 -1.5 -1.5 -0.828 -1.5 0 c f}
\axo at setObject{282}%
{Vertex 73 30 1.5 0.5;}%
-{ 0.5 w 1 0 0 1 73 30 cm -1.5 0 m -1.5 0.828 -0.828 1.5 0 1.5 c 0.828 1.5 1.5 0.828 1.5 0 c 1.5 -0.828 0.828 -1.5 0 -1.5 c -0.828 -1.5 -1.5 -0.828 -1.5 0 c f }
+{ 0.5 w 1 0 0 1 73 30 cm -1.5 0 m -1.5 0.828 -0.828 1.5 0 1.5 c 0.828 1.5 1.5 0.828 1.5 0 c 1.5 -0.828 0.828 -1.5 0 -1.5 c -0.828 -1.5 -1.5 -0.828 -1.5 0 c f}
\axo at setObject{283}%
{AxoGluon 110 30 130 30 3 3 0 0 0.5;}%
{ 0.5 w 0.5 w 1 0 0 1 110 30 cm 5 -3 m 7.7 -3 7.7 3 3.5 3 c 1.25 3 0.25 1.5 0 0 c S 5 -3 m 2.3 -3 2.3 3 7.5 3 c 12.7 3 12.7 -3 10 -3 c 7.3 -3 7.3 3 12.5 3 c 17.7 3 17.7 -3 15 -3 c 12.3 -3 12.3 3 16.5 3 c 18.75 3 19.75 1.5 20 0 c S}
@@ -858,10 +858,10 @@
{ 0.5 w 0.5 w 1 0 0 1 170 30 cm 5 -3 m 7.7 -3 7.7 3 3.5 3 c 1.25 3 0.25 1.5 0 0 c S 5 -3 m 2.3 -3 2.3 3 7.5 3 c 12.7 3 12.7 -3 10 -3 c 7.3 -3 7.3 3 12.5 3 c 17.7 3 17.7 -3 15 -3 c 12.3 -3 12.3 3 16.5 3 c 18.75 3 19.75 1.5 20 0 c S}
\axo at setObject{287}%
{Vertex 130 30 1.5 0.5;}%
-{ 0.5 w 1 0 0 1 130 30 cm -1.5 0 m -1.5 0.828 -0.828 1.5 0 1.5 c 0.828 1.5 1.5 0.828 1.5 0 c 1.5 -0.828 0.828 -1.5 0 -1.5 c -0.828 -1.5 -1.5 -0.828 -1.5 0 c f }
+{ 0.5 w 1 0 0 1 130 30 cm -1.5 0 m -1.5 0.828 -0.828 1.5 0 1.5 c 0.828 1.5 1.5 0.828 1.5 0 c 1.5 -0.828 0.828 -1.5 0 -1.5 c -0.828 -1.5 -1.5 -0.828 -1.5 0 c f}
\axo at setObject{288}%
{Vertex 170 30 1.5 0.5;}%
-{ 0.5 w 1 0 0 1 170 30 cm -1.5 0 m -1.5 0.828 -0.828 1.5 0 1.5 c 0.828 1.5 1.5 0.828 1.5 0 c 1.5 -0.828 0.828 -1.5 0 -1.5 c -0.828 -1.5 -1.5 -0.828 -1.5 0 c f }
+{ 0.5 w 1 0 0 1 170 30 cm -1.5 0 m -1.5 0.828 -0.828 1.5 0 1.5 c 0.828 1.5 1.5 0.828 1.5 0 c 1.5 -0.828 0.828 -1.5 0 -1.5 c -0.828 -1.5 -1.5 -0.828 -1.5 0 c f}
\axo at setObject{289}%
{AxoGluon 210 30 230 30 3 3 0 0 0.5;}%
{ 0.5 w 0.5 w 1 0 0 1 210 30 cm 5 -3 m 7.7 -3 7.7 3 3.5 3 c 1.25 3 0.25 1.5 0 0 c S 5 -3 m 2.3 -3 2.3 3 7.5 3 c 12.7 3 12.7 -3 10 -3 c 7.3 -3 7.3 3 12.5 3 c 17.7 3 17.7 -3 15 -3 c 12.3 -3 12.3 3 16.5 3 c 18.75 3 19.75 1.5 20 0 c S}
@@ -876,10 +876,10 @@
{ 0.5 w 0.5 w 1 0 0 1 270 30 cm 5 -3 m 7.7 -3 7.7 3 3.5 3 c 1.25 3 0.25 1.5 0 0 c S 5 -3 m 2.3 -3 2.3 3 7.5 3 c 12.7 3 12.7 -3 10 -3 c 7.3 -3 7.3 3 12.5 3 c 17.7 3 17.7 -3 15 -3 c 12.3 -3 12.3 3 16.5 3 c 18.75 3 19.75 1.5 20 0 c S}
\axo at setObject{293}%
{Vertex 230 30 1.5 0.5;}%
-{ 0.5 w 1 0 0 1 230 30 cm -1.5 0 m -1.5 0.828 -0.828 1.5 0 1.5 c 0.828 1.5 1.5 0.828 1.5 0 c 1.5 -0.828 0.828 -1.5 0 -1.5 c -0.828 -1.5 -1.5 -0.828 -1.5 0 c f }
+{ 0.5 w 1 0 0 1 230 30 cm -1.5 0 m -1.5 0.828 -0.828 1.5 0 1.5 c 0.828 1.5 1.5 0.828 1.5 0 c 1.5 -0.828 0.828 -1.5 0 -1.5 c -0.828 -1.5 -1.5 -0.828 -1.5 0 c f}
\axo at setObject{294}%
{Vertex 270 30 1.5 0.5;}%
-{ 0.5 w 1 0 0 1 270 30 cm -1.5 0 m -1.5 0.828 -0.828 1.5 0 1.5 c 0.828 1.5 1.5 0.828 1.5 0 c 1.5 -0.828 0.828 -1.5 0 -1.5 c -0.828 -1.5 -1.5 -0.828 -1.5 0 c f }
+{ 0.5 w 1 0 0 1 270 30 cm -1.5 0 m -1.5 0.828 -0.828 1.5 0 1.5 c 0.828 1.5 1.5 0.828 1.5 0 c 1.5 -0.828 0.828 -1.5 0 -1.5 c -0.828 -1.5 -1.5 -0.828 -1.5 0 c f}
\axo at setObject{295}%
{AxoLine 310 30 330 30 0 3 0 0 0 0 0 0 0 0 0 0.5;}%
{ 0.5 w [ 3.333] 1.667 d 310 30 m 330 30 l S}
@@ -888,7 +888,7 @@
{ 0.5 w 0.5 w 1 0 0 1 350 30 cm -1 0 0 -1 0 0 cm 15.852 6.141 m 15.018 8.294 20.758 11.464 22.235 5.884 c 23.222 2.152 21.496 0.397 20 0 c S 15.852 6.141 m 16.686 3.988 23.565 5.632 19.555 12.108 c 15.545 18.584 11.008 13.159 12.563 11.453 c 14.119 9.746 19.939 13.764 13.861 18.354 c 7.782 22.945 5.511 16.247 7.578 15.218 c 9.645 14.189 13.62 20.038 6.294 22.122 c -1.032 24.206 -0.731 17.141 1.569 16.927 c 3.868 16.714 5.462 23.605 -2.122 22.902 c -9.707 22.199 -6.873 15.719 -4.652 16.351 c -2.431 16.983 -3.434 23.984 -10.252 20.589 c -17.07 17.194 -12.087 12.175 -10.245 13.566 c -8.402 14.958 -11.866 21.124 -16.997 15.495 c -22.129 9.866 -15.669 6.986 -14.454 8.949 c -13.238 10.913 -18.695 15.411 -21.447 8.309 c -24.198 1.206 -17.135 0.854 -16.711 3.124 c -16.286 5.393 -23 7.617 -23 0 c -23 -7.617 -16.286 -5.393 -16.711 -3.124 c -17.135 -0.854 -24.198 -1.206 -21.447 -8.309 c -18.695 -15.411 -13.238 -10.913 -14.454 -8.949 c -15.669 -6.986 -22.129 -9.866 -16.997 -15.495 c -11.866 -21.124 -8.402 -14.958 -10.245 -13.566 c -12.087 -12.175 -17.07 -17.194 -10.252 -20.589 c -3.434 -23.984 -2.431 -16.983 -4.652 -16.351 c -6.873 -15.719 -9.707 -22.199 -2.122 -22.902 c 5.462 -23.605 3.868 -16.714 1.569 -16.927 c -0.731 -17.141 -1.032 -24.206 6.294 -22.122 c 13.62 -20.038 9.645 -14.189 7.578 -15.218 c 5.511 -16.247 7.782 -22.945 13.861 -18.354 c 19.939 -13.764 14.119 -9.746 12.563 -11.453 c 11.008 -13.159 15.545 -18.584 19.555 -12.108 c 23.565 -5.632 16.686 -3.988 15.852 -6.141 c 15.018 -8.294 20.758 -11.464 22.235 -5.884 c 23.222 -2.152 21.496 -0.397 20 0 c S}
\axo at setObject{297}%
{Vertex 330 30 1.5 0.5;}%
-{ 0.5 w 1 0 0 1 330 30 cm -1.5 0 m -1.5 0.828 -0.828 1.5 0 1.5 c 0.828 1.5 1.5 0.828 1.5 0 c 1.5 -0.828 0.828 -1.5 0 -1.5 c -0.828 -1.5 -1.5 -0.828 -1.5 0 c f }
+{ 0.5 w 1 0 0 1 330 30 cm -1.5 0 m -1.5 0.828 -0.828 1.5 0 1.5 c 0.828 1.5 1.5 0.828 1.5 0 c 1.5 -0.828 0.828 -1.5 0 -1.5 c -0.828 -1.5 -1.5 -0.828 -1.5 0 c f}
\axo at setObject{298}%
{AxoLine 387 30 407 30 0 3 0 0 0 0 0 0 0 0 0 0.5;}%
{ 0.5 w [ 3.333] 1.667 d 387 30 m 407 30 l S}
@@ -897,7 +897,7 @@
{ 0.5 w 0.5 w 1 0 0 1 430 30 cm 0.981 0.195 -0.195 0.981 0 0 cm 22.558 4.487 m 21.014 12.248 14.822 8.639 15.706 6.506 c 16.59 4.372 23.52 6.199 19.124 12.778 c 14.728 19.357 10.388 13.654 12.021 12.021 c 13.654 10.388 19.357 14.728 12.778 19.124 c 6.199 23.52 4.372 16.59 6.506 15.706 c 8.639 14.822 12.248 21.014 4.487 22.558 c -3.274 24.102 -2.309 17 0 17 c 2.309 17 3.274 24.102 -4.487 22.558 c -12.248 21.014 -8.639 14.822 -6.506 15.706 c -4.372 16.59 -6.199 23.52 -12.778 19.124 c -19.357 14.728 -13.654 10.388 -12.021 12.021 c -10.388 13.654 -14.728 19.357 -19.124 12.778 c -23.52 6.199 -16.59 4.372 -15.706 6.506 c -14.822 8.639 -21.014 12.248 -22.558 4.487 c -24.102 -3.274 -17 -2.309 -17 0 c -17 2.309 -24.102 3.274 -22.558 -4.487 c -21.014 -12.248 -14.822 -8.639 -15.706 -6.506 c -16.59 -4.372 -23.52 -6.199 -19.124 -12.778 c -14.728 -19.357 -10.388 -13.654 -12.021 -12.021 c -13.654 -10.388 -19.357 -14.728 -12.778 -19.124 c -6.199 -23.52 -4.372 -16.59 -6.506 -15.706 c -8.639 -14.822 -12.248 -21.014 -4.487 -22.558 c 3.274 -24.102 2.309 -17 0 -17 c -2.309 -17 -3.274 -24.102 4.487 -22.558 c 12.248 -21.014 8.639 -14.822 6.506 -15.706 c 4.372 -16.59 6.199 -23.52 12.778 -19.124 c 19.357 -14.728 13.654 -10.388 12.021 -12.021 c 10.388 -13.654 14.728 -19.357 19.124 -12.778 c 23.52 -6.199 16.59 -4.372 15.706 -6.506 c 14.822 -8.639 21.014 -12.248 22.558 -4.487 c 24.102 3.274 17 2.309 17 0 c 17 -2.309 24.102 -3.274 22.558 4.487 c S}
\axo at setObject{300}%
{Vertex 407 30 1.5 0.5;}%
-{ 0.5 w 1 0 0 1 407 30 cm -1.5 0 m -1.5 0.828 -0.828 1.5 0 1.5 c 0.828 1.5 1.5 0.828 1.5 0 c 1.5 -0.828 0.828 -1.5 0 -1.5 c -0.828 -1.5 -1.5 -0.828 -1.5 0 c f }
+{ 0.5 w 1 0 0 1 407 30 cm -1.5 0 m -1.5 0.828 -0.828 1.5 0 1.5 c 0.828 1.5 1.5 0.828 1.5 0 c 1.5 -0.828 0.828 -1.5 0 -1.5 c -0.828 -1.5 -1.5 -0.828 -1.5 0 c f}
\axo at setObject{301}%
{Grid 0 0 10 10 15 10 0.5;}%
{ 0.5 w 0 0 m 0 100 l S 10 0 m 10 100 l S 20 0 m 20 100 l S 30 0 m 30 100 l S 40 0 m 40 100 l S 50 0 m 50 100 l S 60 0 m 60 100 l S 70 0 m 70 100 l S 80 0 m 80 100 l S 90 0 m 90 100 l S 100 0 m 100 100 l S 110 0 m 110 100 l S 120 0 m 120 100 l S 130 0 m 130 100 l S 140 0 m 140 100 l S 150 0 m 150 100 l S 0 0 m 150 0 l S 0 10 m 150 10 l S 0 20 m 150 20 l S 0 30 m 150 30 l S 0 40 m 150 40 l S 0 50 m 150 50 l S 0 60 m 150 60 l S 0 70 m 150 70 l S 0 80 m 150 80 l S 0 90 m 150 90 l S 0 100 m 150 100 l S}
@@ -1176,28 +1176,28 @@
{ 0.5 w 0.5 w 1 0 0 1 100 40 cm 0 -1 1 0 0 0 cm 6 -3 m 8.7 -3 8.7 3 4.2 3 c 1.5 3 0.3 1.5 0 0 c S 6 -3 m 3.3 -3 3.3 3 9 3 c 14.7 3 14.7 -3 12 -3 c 9.3 -3 9.3 3 15 3 c 20.7 3 20.7 -3 18 -3 c 15.3 -3 15.3 3 21 3 c 26.7 3 26.7 -3 24 -3 c 21.3 -3 21.3 3 25.8 3 c 28.5 3 29.7 1.5 30 0 c S}
\axo at setObject{393}%
{Vertex 37 70 2 0.5;}%
-{ 0.5 w 1 0 0 1 37 70 cm -2 0 m -2 1.105 -1.105 2 0 2 c 1.105 2 2 1.105 2 0 c 2 -1.105 1.105 -2 0 -2 c -1.105 -2 -2 -1.105 -2 0 c f }
+{ 0.5 w 1 0 0 1 37 70 cm -2 0 m -2 1.105 -1.105 2 0 2 c 1.105 2 2 1.105 2 0 c 2 -1.105 1.105 -2 0 -2 c -1.105 -2 -2 -1.105 -2 0 c f}
\axo at setObject{394}%
{Vertex 163 70 2 0.5;}%
-{ 0.5 w 1 0 0 1 163 70 cm -2 0 m -2 1.105 -1.105 2 0 2 c 1.105 2 2 1.105 2 0 c 2 -1.105 1.105 -2 0 -2 c -1.105 -2 -2 -1.105 -2 0 c f }
+{ 0.5 w 1 0 0 1 163 70 cm -2 0 m -2 1.105 -1.105 2 0 2 c 1.105 2 2 1.105 2 0 c 2 -1.105 1.105 -2 0 -2 c -1.105 -2 -2 -1.105 -2 0 c f}
\axo at setObject{395}%
{Vertex 70 100 2 0.5;}%
-{ 0.5 w 1 0 0 1 70 100 cm -2 0 m -2 1.105 -1.105 2 0 2 c 1.105 2 2 1.105 2 0 c 2 -1.105 1.105 -2 0 -2 c -1.105 -2 -2 -1.105 -2 0 c f }
+{ 0.5 w 1 0 0 1 70 100 cm -2 0 m -2 1.105 -1.105 2 0 2 c 1.105 2 2 1.105 2 0 c 2 -1.105 1.105 -2 0 -2 c -1.105 -2 -2 -1.105 -2 0 c f}
\axo at setObject{396}%
{Vertex 70 40 2 0.5;}%
-{ 0.5 w 1 0 0 1 70 40 cm -2 0 m -2 1.105 -1.105 2 0 2 c 1.105 2 2 1.105 2 0 c 2 -1.105 1.105 -2 0 -2 c -1.105 -2 -2 -1.105 -2 0 c f }
+{ 0.5 w 1 0 0 1 70 40 cm -2 0 m -2 1.105 -1.105 2 0 2 c 1.105 2 2 1.105 2 0 c 2 -1.105 1.105 -2 0 -2 c -1.105 -2 -2 -1.105 -2 0 c f}
\axo at setObject{397}%
{Vertex 130 100 2 0.5;}%
-{ 0.5 w 1 0 0 1 130 100 cm -2 0 m -2 1.105 -1.105 2 0 2 c 1.105 2 2 1.105 2 0 c 2 -1.105 1.105 -2 0 -2 c -1.105 -2 -2 -1.105 -2 0 c f }
+{ 0.5 w 1 0 0 1 130 100 cm -2 0 m -2 1.105 -1.105 2 0 2 c 1.105 2 2 1.105 2 0 c 2 -1.105 1.105 -2 0 -2 c -1.105 -2 -2 -1.105 -2 0 c f}
\axo at setObject{398}%
{Vertex 130 40 2 0.5;}%
-{ 0.5 w 1 0 0 1 130 40 cm -2 0 m -2 1.105 -1.105 2 0 2 c 1.105 2 2 1.105 2 0 c 2 -1.105 1.105 -2 0 -2 c -1.105 -2 -2 -1.105 -2 0 c f }
+{ 0.5 w 1 0 0 1 130 40 cm -2 0 m -2 1.105 -1.105 2 0 2 c 1.105 2 2 1.105 2 0 c 2 -1.105 1.105 -2 0 -2 c -1.105 -2 -2 -1.105 -2 0 c f}
\axo at setObject{399}%
{Vertex 100 100 2 0.5;}%
-{ 0.5 w 1 0 0 1 100 100 cm -2 0 m -2 1.105 -1.105 2 0 2 c 1.105 2 2 1.105 2 0 c 2 -1.105 1.105 -2 0 -2 c -1.105 -2 -2 -1.105 -2 0 c f }
+{ 0.5 w 1 0 0 1 100 100 cm -2 0 m -2 1.105 -1.105 2 0 2 c 1.105 2 2 1.105 2 0 c 2 -1.105 1.105 -2 0 -2 c -1.105 -2 -2 -1.105 -2 0 c f}
\axo at setObject{400}%
{Vertex 100 40 2 0.5;}%
-{ 0.5 w 1 0 0 1 100 40 cm -2 0 m -2 1.105 -1.105 2 0 2 c 1.105 2 2 1.105 2 0 c 2 -1.105 1.105 -2 0 -2 c -1.105 -2 -2 -1.105 -2 0 c f }
+{ 0.5 w 1 0 0 1 100 40 cm -2 0 m -2 1.105 -1.105 2 0 2 c 1.105 2 2 1.105 2 0 c 2 -1.105 1.105 -2 0 -2 c -1.105 -2 -2 -1.105 -2 0 c f}
\axo at setObject{401}%
{AxoPhoton 7 70 40 70 4 3 0 0 0.5;}%
{ 0.5 w 1 0 0 1 7 70 cm 0 0 m 2.334 5.333 3.166 5.333 5.5 0 c 7.834 -5.333 8.666 -5.333 11 0 c 13.334 5.333 14.166 5.333 16.5 0 c 18.834 -5.333 19.666 -5.333 22 0 c 24.334 5.333 25.166 5.333 27.5 0 c 29.834 -5.333 30.666 -5.333 33 0 c S}
@@ -1242,25 +1242,25 @@
{ 0.5 w 0.5 w 1 0 0 1 100 40 cm 0 -1 1 0 0 0 cm 6 -3 m 8.7 -3 8.7 3 4.2 3 c 1.5 3 0.3 1.5 0 0 c S 6 -3 m 3.3 -3 3.3 3 9 3 c 14.7 3 14.7 -3 12 -3 c 9.3 -3 9.3 3 15 3 c 20.7 3 20.7 -3 18 -3 c 15.3 -3 15.3 3 21 3 c 26.7 3 26.7 -3 24 -3 c 21.3 -3 21.3 3 25.8 3 c 28.5 3 29.7 1.5 30 0 c S}
\axo at setObject{415}%
{Vertex 40 70 2 0.5;}%
-{ 0.5 w 1 0 0 1 40 70 cm -2 0 m -2 1.105 -1.105 2 0 2 c 1.105 2 2 1.105 2 0 c 2 -1.105 1.105 -2 0 -2 c -1.105 -2 -2 -1.105 -2 0 c f }
+{ 0.5 w 1 0 0 1 40 70 cm -2 0 m -2 1.105 -1.105 2 0 2 c 1.105 2 2 1.105 2 0 c 2 -1.105 1.105 -2 0 -2 c -1.105 -2 -2 -1.105 -2 0 c f}
\axo at setObject{416}%
{Vertex 163 70 2 0.5;}%
-{ 0.5 w 1 0 0 1 163 70 cm -2 0 m -2 1.105 -1.105 2 0 2 c 1.105 2 2 1.105 2 0 c 2 -1.105 1.105 -2 0 -2 c -1.105 -2 -2 -1.105 -2 0 c f }
+{ 0.5 w 1 0 0 1 163 70 cm -2 0 m -2 1.105 -1.105 2 0 2 c 1.105 2 2 1.105 2 0 c 2 -1.105 1.105 -2 0 -2 c -1.105 -2 -2 -1.105 -2 0 c f}
\axo at setObject{417}%
{Vertex 70 40 2 0.5;}%
-{ 0.5 w 1 0 0 1 70 40 cm -2 0 m -2 1.105 -1.105 2 0 2 c 1.105 2 2 1.105 2 0 c 2 -1.105 1.105 -2 0 -2 c -1.105 -2 -2 -1.105 -2 0 c f }
+{ 0.5 w 1 0 0 1 70 40 cm -2 0 m -2 1.105 -1.105 2 0 2 c 1.105 2 2 1.105 2 0 c 2 -1.105 1.105 -2 0 -2 c -1.105 -2 -2 -1.105 -2 0 c f}
\axo at setObject{418}%
{Vertex 130 100 2 0.5;}%
-{ 0.5 w 1 0 0 1 130 100 cm -2 0 m -2 1.105 -1.105 2 0 2 c 1.105 2 2 1.105 2 0 c 2 -1.105 1.105 -2 0 -2 c -1.105 -2 -2 -1.105 -2 0 c f }
+{ 0.5 w 1 0 0 1 130 100 cm -2 0 m -2 1.105 -1.105 2 0 2 c 1.105 2 2 1.105 2 0 c 2 -1.105 1.105 -2 0 -2 c -1.105 -2 -2 -1.105 -2 0 c f}
\axo at setObject{419}%
{Vertex 130 40 2 0.5;}%
-{ 0.5 w 1 0 0 1 130 40 cm -2 0 m -2 1.105 -1.105 2 0 2 c 1.105 2 2 1.105 2 0 c 2 -1.105 1.105 -2 0 -2 c -1.105 -2 -2 -1.105 -2 0 c f }
+{ 0.5 w 1 0 0 1 130 40 cm -2 0 m -2 1.105 -1.105 2 0 2 c 1.105 2 2 1.105 2 0 c 2 -1.105 1.105 -2 0 -2 c -1.105 -2 -2 -1.105 -2 0 c f}
\axo at setObject{420}%
{Vertex 100 100 2 0.5;}%
-{ 0.5 w 1 0 0 1 100 100 cm -2 0 m -2 1.105 -1.105 2 0 2 c 1.105 2 2 1.105 2 0 c 2 -1.105 1.105 -2 0 -2 c -1.105 -2 -2 -1.105 -2 0 c f }
+{ 0.5 w 1 0 0 1 100 100 cm -2 0 m -2 1.105 -1.105 2 0 2 c 1.105 2 2 1.105 2 0 c 2 -1.105 1.105 -2 0 -2 c -1.105 -2 -2 -1.105 -2 0 c f}
\axo at setObject{421}%
{Vertex 100 40 2 0.5;}%
-{ 0.5 w 1 0 0 1 100 40 cm -2 0 m -2 1.105 -1.105 2 0 2 c 1.105 2 2 1.105 2 0 c 2 -1.105 1.105 -2 0 -2 c -1.105 -2 -2 -1.105 -2 0 c f }
+{ 0.5 w 1 0 0 1 100 40 cm -2 0 m -2 1.105 -1.105 2 0 2 c 1.105 2 2 1.105 2 0 c 2 -1.105 1.105 -2 0 -2 c -1.105 -2 -2 -1.105 -2 0 c f}
\axo at setObject{422}%
{AxoArc 40 35 25 90 270 0 0 0 0 0 0 0 0 0 0 0 0 0.5;}%
{ 0.5 w 1 0 0 1 40 35 cm 0 25 m -13.807 25 -25 13.807 -25 0 c -25 -13.807 -13.807 -25 0 -25 c S}
@@ -1293,7 +1293,7 @@
{ 3 w 1 0 0 1 40 35 cm 0 25 m -13.807 25 -25 13.807 -25 0 c S}
\axo at setObject{432}%
{Vertex 50 60 1.3 3;}%
-{ 3 w 1 0 0 1 50 60 cm -1.3 0 m -1.3 0.718 -0.718 1.3 0 1.3 c 0.718 1.3 1.3 0.718 1.3 0 c 1.3 -0.718 0.718 -1.3 0 -1.3 c -0.718 -1.3 -1.3 -0.718 -1.3 0 c f }
+{ 3 w 1 0 0 1 50 60 cm -1.3 0 m -1.3 0.718 -0.718 1.3 0 1.3 c 0.718 1.3 1.3 0.718 1.3 0 c 1.3 -0.718 0.718 -1.3 0 -1.3 c -0.718 -1.3 -1.3 -0.718 -1.3 0 c f}
\axo at setObject{433}%
{AxoArc 40 35 25 90 270 0 0 0 0 0 0 0 0 0 0 0 0 0.5;}%
{ 0.5 w 1 0 0 1 40 35 cm 0 25 m -13.807 25 -25 13.807 -25 0 c -25 -13.807 -13.807 -25 0 -25 c S}
@@ -1326,7 +1326,7 @@
{ 3 w 1 0 0 1 40 35 cm 0 25 m -13.807 25 -25 13.807 -25 0 c S}
\axo at setObject{443}%
{Vertex 50 60 1.3 3;}%
-{ 3 w 1 0 0 1 50 60 cm -1.3 0 m -1.3 0.718 -0.718 1.3 0 1.3 c 0.718 1.3 1.3 0.718 1.3 0 c 1.3 -0.718 0.718 -1.3 0 -1.3 c -0.718 -1.3 -1.3 -0.718 -1.3 0 c f }
+{ 3 w 1 0 0 1 50 60 cm -1.3 0 m -1.3 0.718 -0.718 1.3 0 1.3 c 0.718 1.3 1.3 0.718 1.3 0 c 1.3 -0.718 0.718 -1.3 0 -1.3 c -0.718 -1.3 -1.3 -0.718 -1.3 0 c f}
\axo at setObject{444}%
{AxoArc 40 35 25 90 270 0 0 0 0 0 0 0 0 0 0 0 0 0.5;}%
{ 0.5 w 1 0 0 1 40 35 cm 0 25 m -13.807 25 -25 13.807 -25 0 c -25 -13.807 -13.807 -25 0 -25 c S}
@@ -1386,7 +1386,7 @@
{ 3 w 1 0 0 1 40 35 cm 0 25 m -13.807 25 -25 13.807 -25 0 c S}
\axo at setObject{463}%
{Vertex 50 60 1.3 3;}%
-{ 3 w 1 0 0 1 50 60 cm -1.3 0 m -1.3 0.718 -0.718 1.3 0 1.3 c 0.718 1.3 1.3 0.718 1.3 0 c 1.3 -0.718 0.718 -1.3 0 -1.3 c -0.718 -1.3 -1.3 -0.718 -1.3 0 c f }
+{ 3 w 1 0 0 1 50 60 cm -1.3 0 m -1.3 0.718 -0.718 1.3 0 1.3 c 0.718 1.3 1.3 0.718 1.3 0 c 1.3 -0.718 0.718 -1.3 0 -1.3 c -0.718 -1.3 -1.3 -0.718 -1.3 0 c f}
\axo at setObject{464}%
{AxoArc 40 35 25 90 270 0 0 0 0 0 0 0 0 0 0 0 0 0.5;}%
{ 0.5 w 1 0 0 1 40 35 cm 0 25 m -13.807 25 -25 13.807 -25 0 c -25 -13.807 -13.807 -25 0 -25 c S}
@@ -1413,7 +1413,7 @@
{ 3 w 50 10 m 50 60 l S}
\axo at setObject{472}%
{Vertex 50 60 1.3 3;}%
-{ 3 w 1 0 0 1 50 60 cm -1.3 0 m -1.3 0.718 -0.718 1.3 0 1.3 c 0.718 1.3 1.3 0.718 1.3 0 c 1.3 -0.718 0.718 -1.3 0 -1.3 c -0.718 -1.3 -1.3 -0.718 -1.3 0 c f }
+{ 3 w 1 0 0 1 50 60 cm -1.3 0 m -1.3 0.718 -0.718 1.3 0 1.3 c 0.718 1.3 1.3 0.718 1.3 0 c 1.3 -0.718 0.718 -1.3 0 -1.3 c -0.718 -1.3 -1.3 -0.718 -1.3 0 c f}
\axo at setObject{473}%
{AxoLine 40 60 50 60 0 0 0 0 0 0 0 0 0 0 0 3;}%
{ 3 w 40 60 m 50 60 l S}
@@ -1473,7 +1473,7 @@
{ 3 w 50 10 m 50 60 l S}
\axo at setObject{492}%
{Vertex 50 60 1.3 3;}%
-{ 3 w 1 0 0 1 50 60 cm -1.3 0 m -1.3 0.718 -0.718 1.3 0 1.3 c 0.718 1.3 1.3 0.718 1.3 0 c 1.3 -0.718 0.718 -1.3 0 -1.3 c -0.718 -1.3 -1.3 -0.718 -1.3 0 c f }
+{ 3 w 1 0 0 1 50 60 cm -1.3 0 m -1.3 0.718 -0.718 1.3 0 1.3 c 0.718 1.3 1.3 0.718 1.3 0 c 1.3 -0.718 0.718 -1.3 0 -1.3 c -0.718 -1.3 -1.3 -0.718 -1.3 0 c f}
\axo at setObject{493}%
{AxoLine 40 60 50 60 0 0 0 0 0 0 0 0 0 0 0 3;}%
{ 3 w 40 60 m 50 60 l S}
Modified: trunk/Build/source/utils/axodraw2/configure
===================================================================
--- trunk/Build/source/utils/axodraw2/configure 2019-09-06 21:14:35 UTC (rev 52041)
+++ trunk/Build/source/utils/axodraw2/configure 2019-09-06 22:26:30 UTC (rev 52042)
@@ -1,6 +1,6 @@
#! /bin/sh
# Guess values for system-dependent variables and create Makefiles.
-# Generated by GNU Autoconf 2.69 for axohelp (TeX Live) 1.1.
+# Generated by GNU Autoconf 2.69 for axohelp (TeX Live) 1.3.
#
# Report bugs to <jcc8 at psu.edu>.
#
@@ -578,8 +578,8 @@
# Identity of this package.
PACKAGE_NAME='axohelp (TeX Live)'
PACKAGE_TARNAME='axohelp--tex-live-'
-PACKAGE_VERSION='1.1'
-PACKAGE_STRING='axohelp (TeX Live) 1.1'
+PACKAGE_VERSION='1.3'
+PACKAGE_STRING='axohelp (TeX Live) 1.3'
PACKAGE_BUGREPORT='jcc8 at psu.edu'
PACKAGE_URL=''
@@ -1236,7 +1236,7 @@
# Omit some internal or obsolete options to make the list less imposing.
# This message is too long to be a string in the A/UX 3.1 sh.
cat <<_ACEOF
-\`configure' configures axohelp (TeX Live) 1.1 to adapt to many kinds of systems.
+\`configure' configures axohelp (TeX Live) 1.3 to adapt to many kinds of systems.
Usage: $0 [OPTION]... [VAR=VALUE]...
@@ -1303,7 +1303,7 @@
if test -n "$ac_init_help"; then
case $ac_init_help in
- short | recursive ) echo "Configuration of axohelp (TeX Live) 1.1:";;
+ short | recursive ) echo "Configuration of axohelp (TeX Live) 1.3:";;
esac
cat <<\_ACEOF
@@ -1399,7 +1399,7 @@
test -n "$ac_init_help" && exit $ac_status
if $ac_init_version; then
cat <<\_ACEOF
-axohelp (TeX Live) configure 1.1
+axohelp (TeX Live) configure 1.3
generated by GNU Autoconf 2.69
Copyright (C) 2012 Free Software Foundation, Inc.
@@ -1500,7 +1500,7 @@
This file contains any messages produced by compilers while
running configure, to aid debugging if configure makes a mistake.
-It was created by axohelp (TeX Live) $as_me 1.1, which was
+It was created by axohelp (TeX Live) $as_me 1.3, which was
generated by GNU Autoconf 2.69. Invocation command line was
$ $0 $@
@@ -3424,7 +3424,7 @@
# Define the identity of the package.
PACKAGE='axohelp--tex-live-'
- VERSION='1.1'
+ VERSION='1.3'
# Some tools Automake needs.
@@ -5111,7 +5111,7 @@
# report actual input values of CONFIG_FILES etc. instead of their
# values after options handling.
ac_log="
-This file was extended by axohelp (TeX Live) $as_me 1.1, which was
+This file was extended by axohelp (TeX Live) $as_me 1.3, which was
generated by GNU Autoconf 2.69. Invocation command line was
CONFIG_FILES = $CONFIG_FILES
@@ -5168,7 +5168,7 @@
cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
ac_cs_config="`$as_echo "$ac_configure_args" | sed 's/^ //; s/[\\""\`\$]/\\\\&/g'`"
ac_cs_version="\\
-axohelp (TeX Live) config.status 1.1
+axohelp (TeX Live) config.status 1.3
configured by $0, generated by GNU Autoconf 2.69,
with options \\"\$ac_cs_config\\"
Modified: trunk/Build/source/utils/axodraw2/configure.ac
===================================================================
--- trunk/Build/source/utils/axodraw2/configure.ac 2019-09-06 21:14:35 UTC (rev 52041)
+++ trunk/Build/source/utils/axodraw2/configure.ac 2019-09-06 22:26:30 UTC (rev 52042)
@@ -7,7 +7,7 @@
dnl gives unlimited permission to copy and/or distribute it,
dnl with or without modifications, as long as this notice is preserved.
dnl
-AC_INIT([axohelp (TeX Live)], [1.1], [jcc8 at psu.edu])
+AC_INIT([axohelp (TeX Live)], [1.3], [jcc8 at psu.edu])
AC_PREREQ([2.65])
AC_CONFIG_SRCDIR([axodraw2-src/axohelp.c])
AC_CONFIG_AUX_DIR([../../build-aux])
More information about the tex-live-commits
mailing list