texlive[52039] Master/texmf-dist: mismath (6sep19)
commits+karl at tug.org
commits+karl at tug.org
Fri Sep 6 23:13:02 CEST 2019
Revision: 52039
http://tug.org/svn/texlive?view=revision&revision=52039
Author: karl
Date: 2019-09-06 23:13:02 +0200 (Fri, 06 Sep 2019)
Log Message:
-----------
mismath (6sep19)
Modified Paths:
--------------
trunk/Master/texmf-dist/doc/latex/mismath/mismath.pdf
trunk/Master/texmf-dist/source/latex/mismath/mismath.dtx
trunk/Master/texmf-dist/tex/latex/mismath/mismath.sty
Modified: trunk/Master/texmf-dist/doc/latex/mismath/mismath.pdf
===================================================================
(Binary files differ)
Modified: trunk/Master/texmf-dist/source/latex/mismath/mismath.dtx
===================================================================
--- trunk/Master/texmf-dist/source/latex/mismath/mismath.dtx 2019-09-06 21:12:46 UTC (rev 52038)
+++ trunk/Master/texmf-dist/source/latex/mismath/mismath.dtx 2019-09-06 21:13:02 UTC (rev 52039)
@@ -20,7 +20,7 @@
%<*package>
\NeedsTeXFormat{LaTeX2e}[2005/12/01]
\ProvidesPackage{mismath}
- [2019/06/22 v1.5 .dtx mismath file]
+ [2019/09/06 v1.6 .dtx mismath file]
%</package>
%<*driver>
\documentclass{ltxdoc}
@@ -85,12 +85,13 @@
% creating general @moperator macro, using mathup instead of mathrm}
% \changes{v1.2}{2019/04/27}{Added mathtools package, font definition Roman -> up,
% changes in documentation, removing the PEroman macro}
-% \changes{v1.3}{2019/05/05}{Using bslash in the internal @mwarning macro}
+% \changes{v1.3}{2019/05/05}{Using bslash in the internal @mwarning macro, loading of mathfixs package}
% \changes{v1.3}{2019/05/08}{Many corrections in documentation}
% \changes{v1.4}{2019/05/22}{Changing font definition up -> UpSh,
% due to incompatibility with unicode-math}
-% \changes{v1.5}{2019/05/30}{A solution for using mul with frac, adding paren macro}
+% \changes{v1.5}{2019/05/30}{A solution for using mul with frac, addition of paren macro}
% \changes{v1.5}{2019/06/22}{small corrections in documentation}
+% \changes{v1.6}{2019/09/06}{Removing mathfixs package}
%
% \GetFileInfo{mismath.sty}
%
@@ -98,7 +99,7 @@
% corresponds to \textsf{mismath}~\fileversion, dated \filedate.
% Thanks to François Bastouil for help in English translation.}}
% \author{Antoine Missier \\ \texttt{antoine.missier at ac-toulouse.fr}}
-% \date{June 22, 2019}
+% \date{September 6, 2019}
% \maketitle
%
% \section{Introduction}
@@ -150,16 +151,15 @@
% \textsf{amsmath} has to be loaded
% with the required options before \textsf{mismath}.
%
-% Two other usefull packages are loaded:
+% Another package,
% \textsf{mathtools} by Morten Høgholm and Lars Madsen~\cite{TOOL}
-% and \textsf{mathfixs} by Niklas Beiser with \texttt{frac} and \texttt{root} options~\cite{MFIX}.
+% is also loaded. It provides many usefull macros.
%
% \medskip
% A recommendation, seldom observed, is to typeset uppercase Greek letters in italic shape
% like other variables~\cite{ICTNS}. This is automatically done with the \textsf{fixmath} package
-% by Walter Schmidt~\cite{FIXM} or \textsf{isomath} by Günter Milde~\cite{ISOM}
-% or you can do |\ProvideMathFix{greekcaps}| in the preamble, thanks to the \textsf{mathfixs} package.
-% But this feature is not implemented in \textsf{mismath} because this rule is conflicting
+% by Walter Schmidt~\cite{FIXM},
+% but this feature is not implemented in \textsf{mismath} because this rule is conflicting
% to the one used for instance in France where all mathematics capitals
% have to be typeset in upright shape\footnote{The \textsf{frenchmath} package~\cite{FR}
% takes this rule into account.}.
@@ -273,9 +273,7 @@
% from \textsf{amsbsy} package, loaded by \textsf{amsmath}.
% But other packages producing bold italic can be preferred, e.g.\@
% \texttt{\bslash bm} from \textsf{bm} package or |\mathbold| from \textsf{fixmath}
-% package (also implemented in \textsf{mathfixs}\footnote{To activate a feature
-% of \textsf{mathfix} like \texttt{mathbold}, do \texttt{\bslash ProvideMathFix\{mathbold\}}.})
-% or |\mathbfit| from \textsf{isomath}.
+% package or |\mathbfit| from \textsf{isomath}.
% For that, redefine |\boldvectcommand|:
% for instance |\renewcommand\boldvectcommand{\mathbold}|.
%
@@ -334,9 +332,8 @@
% italic, to make it different from variables
% (as mentioned in \cite{TYPMA}~\cite{NIST}~\cite{ICTNS}~\cite{LSHORT}).
% For this, we provide the |\di| command.
-% In the first following example, notice the thin spaces before the d,
-% as for classic function's names; in the second one,
-% spaces before fractions have been enlarged by the \textsf{mathfixs} package: \\
+% See the following examples (notice the thin spaces before the d,
+% as for classic function's names): \\
% \begin{minipage}[t]{7cm}
% \begin{verbatim}
%\[ \iint xy\di x\di y \]
@@ -540,16 +537,13 @@
% is less than $\lambda+\alpha \mul b-\beta \mul c$, obtained with |\mul|.
% \end{center}
%
-% When using |\mul| with fractions, irregular spacing may occur due to the \texttt{frac}
-% feature of the \textsf{mathfixs} package. As explained in the \textsf{mathfixs}
-% documentation~\cite{MFIX}, a solution to eliminate spaces around a fraction, is
-% to enclose the fraction with brackets:
-% |{\frac|\marg{num}\marg{denom}|}|\footnote{We have the same problem
-% and the same solution when using \texttt{\bslash mul} before an operator name
-% or a \texttt{\bslash left...\bslash right} structure.}.
+% When using |\mul| before an operator name
+% or a |\left...\right| structure, additionnal spacing occur on the right side of |\mul|.
+% A solution to get the same amount of space on the two sides of |\mul|, is to
+% enclose the operator name (or the structure) with brackets:
% \begin{center}
-% $x\mul\dfrac{1}{x}$ is less than $x\mul{\dfrac{1}{x}}$
-% obtained with |x\mul{\dfrac{1}{x}}|.
+% Compare $x\mul\sin x$ with $x\mul{\sin x}$
+% obtained with |x\mul{\sin x}|.
% \end{center}
%
% \DescribeMacro{\then}
@@ -568,7 +562,7 @@
% Spaces around parenthesis produced by |\left(...\right)| may be too large, for example
% after a function name or a point name with coordinates.
% A solution is to add a thin negative space |\!| before the opening (or after the closing)
-% parenthesis or to enclose the
+% parenthesis, or to enclose the
% |\left(...\right)| structure by brackets, or to use the |\paren| macro:
% \begin{center}
% $\sin\left(\frac{\pi}{3}\right)\mul 2$ is less than $\sin\paren{\frac{\pi}{3}}\mul 2$
@@ -729,7 +723,7 @@
% as shown in the following example.
% But you have to load the \textsf{multicol} package in the preamble.
% \begin{mathcols}
-% & \frac{1}{2 \mul \pow{\frac{1}{4}}{n} + 1} \geq 0.999 \\
+% & \frac{1}{2 \mul {\pow{\frac{1}{4}}{n}} + 1} \geq 0.999 \\
% \iff\ & 1 \geq 1.998 \pow{\frac{1}{4}}{n} + 0.999 \\
% \iff\ & 0.001 \geq \frac{1.998}{4^n} \\
% \changecol
@@ -767,7 +761,6 @@
\RequirePackage{ifthen}
\RequirePackage{xspace}
\RequirePackage{mathtools}
-\RequirePackage[frac,root]{mathfixs}
% \end{macrocode}
% The above conditional packages loading avoids ``option clash'' errors if the packages
% have been previously loaded with (other) options.
@@ -994,7 +987,6 @@
% Michael Downes, Davis M.~Jones, David Carlisle, CTAN, v2.17b 2018/12/01.
% \bibitem{TOOL} \emph{The \textsf{mathtool} package}. Morten Høgholm, Lars Madsen, CTAN,
% v1.21 2018/01/08.
-% \bibitem{MFIX} \emph{The \textsf{mathfixs} Package}. Niklas Beisert, CTAN, v1.01 2018/12/30.
% \bibitem{VECT} \emph{Typesetting vectors with beautiful arrow with \LaTeXe}.
% \textsf{esvect} package by Eddie Saudrais, CTAN, v1.3 2013/07/11.
% \bibitem{GREEK} \emph{The \textsf{upgreek} package for \LaTeXe}, Walter Schmidt,
Modified: trunk/Master/texmf-dist/tex/latex/mismath/mismath.sty
===================================================================
--- trunk/Master/texmf-dist/tex/latex/mismath/mismath.sty 2019-09-06 21:12:46 UTC (rev 52038)
+++ trunk/Master/texmf-dist/tex/latex/mismath/mismath.sty 2019-09-06 21:13:02 UTC (rev 52039)
@@ -22,7 +22,7 @@
%%
\NeedsTeXFormat{LaTeX2e}[2005/12/01]
\ProvidesPackage{mismath}
- [2019/06/22 v1.5 .dtx mismath file]
+ [2019/09/06 v1.6 .dtx mismath file]
\DeclareOption*{\PassOptionsToPackage{\CurrentOption}{amsmath}}
@@ -32,7 +32,6 @@
\RequirePackage{ifthen}
\RequirePackage{xspace}
\RequirePackage{mathtools}
-\RequirePackage[frac,root]{mathfixs}
{\catcode`\|=\z@ \catcode`\\=12 |gdef|bslash{\}} % the \bslash command
\newcommand\@mwarning[1]{
\PackageWarning{mismath}{
More information about the tex-live-commits
mailing list