texlive[52384] Master: lni (14oct19)
commits+karl at tug.org
commits+karl at tug.org
Mon Oct 14 22:50:14 CEST 2019
Revision: 52384
http://tug.org/svn/texlive?view=revision&revision=52384
Author: karl
Date: 2019-10-14 22:50:13 +0200 (Mon, 14 Oct 2019)
Log Message:
-----------
lni (14oct19)
Modified Paths:
--------------
trunk/Master/texmf-dist/bibtex/bst/lni/lni.bst
trunk/Master/texmf-dist/bibtex/bst/lni/lnig.bst
trunk/Master/texmf-dist/doc/latex/lni/CHANGELOG.md
trunk/Master/texmf-dist/doc/latex/lni/README.md
trunk/Master/texmf-dist/doc/latex/lni/lni.pdf
trunk/Master/texmf-dist/source/latex/lni/lni.dtx
trunk/Master/texmf-dist/source/latex/lni/lni.ins
trunk/Master/texmf-dist/tex/latex/lni/lni.cls
trunk/Master/tlpkg/libexec/ctan2tds
Added Paths:
-----------
trunk/Master/texmf-dist/doc/latex/lni/lni-author-template.tex
trunk/Master/texmf-dist/doc/latex/lni/lni-paper-example-de.bib
trunk/Master/texmf-dist/doc/latex/lni/lni-paper-example-de.tex
Modified: trunk/Master/texmf-dist/bibtex/bst/lni/lni.bst
===================================================================
--- trunk/Master/texmf-dist/bibtex/bst/lni/lni.bst 2019-10-14 20:46:45 UTC (rev 52383)
+++ trunk/Master/texmf-dist/bibtex/bst/lni/lni.bst 2019-10-14 20:50:13 UTC (rev 52384)
@@ -553,7 +553,7 @@
FUNCTION {article}
{ output.bibitem
- format.authors %"author" output.check %% No dot after authors
+ format.authors write$ %"author" output.check %% No dot after authors
new.block
format.title "title" output.check
new.block
@@ -576,7 +576,7 @@
{ output.bibitem
author empty$
{ format.editors "author and editor" output.check }
- { format.authors %output.nonnull %%no dot after authors:
+ { format.authors write$ %output.nonnull %%no dot after authors:
crossref missing$
{ "author and editor" editor either.or.check }
'skip$
@@ -622,7 +622,7 @@
{ output.bibitem
author empty$
{ format.editors "author and editor" output.check }
- { format.authors %*output.nonnull %%no dot after authors:
+ { format.authors write$ %*output.nonnull %%no dot after authors:
crossref missing$
{ "author and editor" editor either.or.check }
'skip$
@@ -657,7 +657,7 @@
FUNCTION {incollection}
{ output.bibitem
- format.authors %"author" output.check %%no dot after authors:
+ format.authors write$ %"author" output.check %%no dot after authors:
new.block
format.title "title" output.check
new.block
@@ -683,7 +683,7 @@
FUNCTION {inproceedings}
{ output.bibitem
- format.authors %"author" output.check %%no dot after authors:
+ format.authors write$ %"author" output.check %%no dot after authors:
new.block
format.title "title" output.check
new.block
@@ -752,7 +752,7 @@
FUNCTION {mastersthesis}
{ output.bibitem
- format.authors %"author" output.check
+ format.authors write$ %"author" output.check
new.block
format.title "title" output.check
new.block
@@ -795,7 +795,7 @@
FUNCTION {phdthesis}
{ output.bibitem
- format.authors %"author" output.check
+ format.authors write$ %"author" output.check
new.block
format.btitle "title" output.check
new.block
@@ -845,7 +845,7 @@
FUNCTION {techreport}
{ output.bibitem
- format.authors %"author" output.check
+ format.authors write$ %"author" output.check
new.block
format.title "title" output.check
new.block
@@ -860,7 +860,7 @@
FUNCTION {unpublished}
{ output.bibitem
- format.authors %"author" output.check
+ format.authors write$ %"author" output.check
new.block
format.title "title" output.check
new.block
@@ -1285,7 +1285,7 @@
EXECUTE {end.bib}
%%
-%% Copyright (C) 2016-2019 by Gesellschaft für Informatik e.V. (GI)
+%% Copyright (C) 2016-2019 by Gesellschaft f^^c3^^bcr Informatik e.V. (GI)
%%
%% This work may be distributed and/or modified under the
%% conditions of the LaTeX Project Public License (LPPL), either
Modified: trunk/Master/texmf-dist/bibtex/bst/lni/lnig.bst
===================================================================
--- trunk/Master/texmf-dist/bibtex/bst/lni/lnig.bst 2019-10-14 20:46:45 UTC (rev 52383)
+++ trunk/Master/texmf-dist/bibtex/bst/lni/lnig.bst 2019-10-14 20:50:13 UTC (rev 52384)
@@ -553,7 +553,7 @@
FUNCTION {article}
{ output.bibitem
- format.authors %"author" output.check %% No dot after authors
+ format.authors write$ %"author" output.check %% No dot after authors
new.block
format.title "title" output.check
new.block
@@ -576,7 +576,7 @@
{ output.bibitem
author empty$
{ format.editors "author and editor" output.check }
- { format.authors %output.nonnull %%no dot after authors:
+ { format.authors write$ %output.nonnull %%no dot after authors:
crossref missing$
{ "author and editor" editor either.or.check }
'skip$
@@ -622,7 +622,7 @@
{ output.bibitem
author empty$
{ format.editors "author and editor" output.check }
- { format.authors %*output.nonnull %%no dot after authors:
+ { format.authors write$ %*output.nonnull %%no dot after authors:
crossref missing$
{ "author and editor" editor either.or.check }
'skip$
@@ -657,7 +657,7 @@
FUNCTION {incollection}
{ output.bibitem
- format.authors %"author" output.check %%no dot after authors:
+ format.authors write$ %"author" output.check %%no dot after authors:
new.block
format.title "title" output.check
new.block
@@ -683,7 +683,7 @@
FUNCTION {inproceedings}
{ output.bibitem
- format.authors %"author" output.check %%no dot after authors:
+ format.authors write$ %"author" output.check %%no dot after authors:
new.block
format.title "title" output.check
new.block
@@ -752,7 +752,7 @@
FUNCTION {mastersthesis}
{ output.bibitem
- format.authors %"author" output.check
+ format.authors write$ %"author" output.check
new.block
format.title "title" output.check
new.block
@@ -795,7 +795,7 @@
FUNCTION {phdthesis}
{ output.bibitem
- format.authors %"author" output.check
+ format.authors write$ %"author" output.check
new.block
format.btitle "title" output.check
new.block
@@ -845,7 +845,7 @@
FUNCTION {techreport}
{ output.bibitem
- format.authors %"author" output.check
+ format.authors write$ %"author" output.check
new.block
format.title "title" output.check
new.block
@@ -860,7 +860,7 @@
FUNCTION {unpublished}
{ output.bibitem
- format.authors %"author" output.check
+ format.authors write$ %"author" output.check
new.block
format.title "title" output.check
new.block
@@ -875,7 +875,7 @@
MACRO {feb} {"Februar"}
-MACRO {mar} {"März"}
+MACRO {mar} {"M^^c3^^a4rz"}
MACRO {apr} {"April"}
@@ -1285,7 +1285,7 @@
EXECUTE {end.bib}
%%
-%% Copyright (C) 2016-2019 by Gesellschaft für Informatik e.V. (GI)
+%% Copyright (C) 2016-2019 by Gesellschaft f^^c3^^bcr Informatik e.V. (GI)
%%
%% This work may be distributed and/or modified under the
%% conditions of the LaTeX Project Public License (LPPL), either
Modified: trunk/Master/texmf-dist/doc/latex/lni/CHANGELOG.md
===================================================================
--- trunk/Master/texmf-dist/doc/latex/lni/CHANGELOG.md 2019-10-14 20:46:45 UTC (rev 52383)
+++ trunk/Master/texmf-dist/doc/latex/lni/CHANGELOG.md 2019-10-14 20:50:13 UTC (rev 52384)
@@ -6,9 +6,26 @@
## [Unreleased]
-## [1.5.0] -2019-04-04
+## [1.6.0] - 2019-10-14
### Added
+- Optional argument for `\booktitle` to support a short book title for running headers
+- New macro `\booksubtitle`
+- Add support for `selnolig` (LuaTeX-only)
+
+### Changed
+- `\email` now generates a `mailto:` hyperlink
+- Example file: `align` instead of `eqnarray`
+- Add `driver=none` option to `geometry` for better crop results (independent from engine)
+
+### Fixed
+- Global options are passed to `article` class ([#78](https://github.com/gi-ev/LNI/issues/78))
+- Finally fix BiBTeX issue thanks to @ytzemih ([#6](https://github.com/gi-ev/LNI/issues/6))
+- `hyperref` is loaded without options to make it more compatible with other packages like `authorarchive`
+
+## [1.5.0] - 2019-04-04
+
+### Added
- Load package `textcomp` by default and add option `upquote` to `listings` package ([#69](https://github.com/gi-ev/LNI/issues/69))
- New option `norunningheads` to remove all running headers from the document
([#77](https://github.com/gi-ev/LNI/issues/77))
@@ -79,11 +96,11 @@
## [1.0.0] - 2017-04-07
First release of the revised files
-[Unreleased]: https://github.com/gi-ev/LNI/compare/v1.4...HEAD
-[1.4.0]: https://github.com/gi-ev/LNI/releases/tag/v1.5
+[Unreleased]: https://github.com/gi-ev/LNI/compare/v1.6...HEAD
+[1.6.0]: https://github.com/gi-ev/LNI/releases/tag/v1.6
+[1.5.0]: https://github.com/gi-ev/LNI/releases/tag/v1.5
[1.4.0]: https://github.com/gi-ev/LNI/releases/tag/v1.4
[1.3.0]: https://github.com/gi-ev/LNI/releases/tag/v1.3
[1.2.0]: https://github.com/gi-ev/LNI/releases/tag/v1.2
[1.1.0]: https://github.com/gi-ev/LNI/releases/tag/v1.1
[1.0.0]: https://github.com/gi-ev/LNI/releases/tag/v1.0
-
Modified: trunk/Master/texmf-dist/doc/latex/lni/README.md
===================================================================
--- trunk/Master/texmf-dist/doc/latex/lni/README.md 2019-10-14 20:46:45 UTC (rev 52383)
+++ trunk/Master/texmf-dist/doc/latex/lni/README.md 2019-10-14 20:50:13 UTC (rev 52384)
@@ -4,7 +4,7 @@
----------------------------------------------------------------------------
lni -- A class for submissions to the ``Lecture Notes in Informatics''
(c) 2016-2019 Gesellschaft für Informatik (GI)
-Version: 1.5
+Version: 1.6
Maintainer: Martin Sievers
Email: martin.sievers at schoenerpublizieren.de
License: Released under the LaTeX Project Public License v1.3c or later
@@ -19,10 +19,10 @@
It is based on previous templates created on behalf of the GI.
Quick start:
-Download [lni-author-template.tex](lni-author-template.tex) and edit it in
+Download [lni-author-template.tex](lni-author-template.tex) and edit it in
your favorite LaTeX editor.
You will have to use [BibTeX](https://www.ctan.org/pkg/bibtex) as bibliography tool.
-In case you want to use [biblatex](https://www.ctan.org/pkg/biblatex) and
+In case you want to use [biblatex](https://www.ctan.org/pkg/biblatex) and
[Biber](https://www.ctan.org/pkg/biber), read on in the documentation of this class.
You should use `pdflatex` as `xelatex` and `lualatex` lack some features of the class file.
Added: trunk/Master/texmf-dist/doc/latex/lni/lni-author-template.tex
===================================================================
--- trunk/Master/texmf-dist/doc/latex/lni/lni-author-template.tex (rev 0)
+++ trunk/Master/texmf-dist/doc/latex/lni/lni-author-template.tex 2019-10-14 20:50:13 UTC (rev 52384)
@@ -0,0 +1,43 @@
+% !TeX encoding = UTF-8
+% !TeX program = pdflatex
+% !BIB program = bibtex
+
+%%% Um einen Artikel auf deutsch zu schreiben, gen^^c3^^bcgt es die Klasse ohne
+%%% Parameter zu laden.
+\documentclass[]{lni}
+%%% To write an article in English, please use the option ``english'' in order
+%%% to get the correct hyphenation patterns and terms.
+%%% \documentclass[english]{class}
+%%
+\begin{document}
+%%% Mehrere Autoren werden durch \and voneinander getrennt.
+%%% Die Fu^^c3^^9fnote enth^^c3^^a4lt die Adresse sowie eine E-Mail-Adresse.
+%%% Das optionale Argument (sofern angegeben) wird f^^c3^^bcr die Kopfzeile verwendet.
+\title[Ein Kurztitel]{Ein sehr langer Titel ^^c3^^bcber mehrere Zeilen mit sehr vielen
+Worten und noch mehr Buchstaben}
+%%%\subtitle{Untertitel / Subtitle} % if needed
+\author[Vorname1 Nachname1 \and Firstname2 Lastname2]
+{Vorname1 Nachname1\footnote{Universit^^c3^^a4t, Abteilung, Stra^^c3^^9fe, Postleitzahl Ort,
+Land \email{emailaddress at author1}} \and
+Firstname2 Lastname2\footnote{University, Department, Address, Country
+\email{emailaddress at author2}}}
+\startpage{11} % Beginn der Seitenz^^c3^^a4hlung f^^c3^^bcr diesen Beitrag / Start page
+\editor{Herausgeber et al.} % Names of Editors
+\booktitle{Name-der-Konferenz} % Name of book title
+\year{2017}
+%%%\lnidoi{18.18420/provided-by-editor-02} % if known
+\maketitle
+
+\begin{abstract}
+This is a brief overview of the paper, which should be 70 to 150 words long and
+include the most relevant points. This has to be a single paragraph.
+\end{abstract}
+\begin{keywords}
+Schlagwort1 \and Schlagwort2 %Keyword1 \and Keyword2
+\end{keywords}
+%%% Beginn des Artikeltexts
+\section{^^c3^^9cberschrift/Heading}
+
+%%% Angabe der .bib-Datei (ohne Endung) / State .bib file (for BibTeX usage)
+\bibliography{mybibfile} %\printbibliography if you use biblatex/Biber
+\end{document}
Property changes on: trunk/Master/texmf-dist/doc/latex/lni/lni-author-template.tex
___________________________________________________________________
Added: svn:eol-style
## -0,0 +1 ##
+native
\ No newline at end of property
Added: trunk/Master/texmf-dist/doc/latex/lni/lni-paper-example-de.bib
===================================================================
--- trunk/Master/texmf-dist/doc/latex/lni/lni-paper-example-de.bib (rev 0)
+++ trunk/Master/texmf-dist/doc/latex/lni/lni-paper-example-de.bib 2019-10-14 20:50:13 UTC (rev 52384)
@@ -0,0 +1,90 @@
+
+ at InProceedings{ABC01,
+ author = {N. Abraham and U. Bibel and P. Corleone},
+ title = {Formatting Contributions for Proceedings},
+ pages = {46-53},
+ crossref = {Gl01},
+}
+
+ at InBook{Az09,
+ pages = {135-162},
+ title = {Die Fu^^c3^^9fnote in LNI-B^^c3^^a4nden},
+ author = {Azubi, L. and others},
+ crossref = {Gl09},
+}
+
+ at Book{AB00,
+ title = {Formatierungsrichtlinien f^^c3^^bcr Tagungsb^^c3^^a4nde},
+ publisher = {Format-Verlag},
+ year = {2000},
+ author = {K. Abel and U. Bibel},
+ address = {Bonn},
+}
+
+ at Book{Ez10,
+ title = {The Magic Format -- Your Way to Pretty Books},
+ publisher = {Noah \& Sons},
+ year = {2010},
+ author = {O. Ezgarani},
+}
+
+ at Article{Gl06,
+ author = {H. I. Gl^^c3^^bcck},
+ title = {Formatierung leicht gemacht},
+ journal = {Formatierungsjournal},
+ volume = {11},
+ number = {09},
+ year = {2009},
+ pages = {23-27},
+}
+
+ at Book{Wa14,
+ title = {Essenzen der Informatik},
+ publisher = {Verlag Formvoll},
+ year = {2014},
+ author = {K. Wasser and H. Feuer and R. Erde and H. Licht},
+}
+
+ at Book{Wa14b,
+ title = {Ganz neue Essenzen der Informatik im selben Jahr},
+ publisher = {Format-Verlag},
+ year = {2014},
+ author = {K. Wasser and H. Feuer and R. Erde and H. Licht},
+}
+
+ at Proceedings{Gl01,
+ title = {Proc. 7th Int. Conf. on Formatting of Workshop-Proceedings},
+ year = {2001},
+ editor = {Gl^^c3^^bcck, H. I.},
+ address = {San Francisco},
+ publisher = {Noah \& Sons},
+ booktitle = {Proc. 7th Int. Conf. on Formatting of Workshop-Proceedings},
+}
+
+ at Book{Gl09,
+ title = {Formatierung 2009},
+ publisher = {Format-Verlag},
+ year = {2009},
+ editor = {H. I. Gl^^c3^^bcck},
+ number = {999},
+ series = {LNI},
+ address = {Bonn},
+ booktitle = {Formatierung 2009},
+}
+
+ at Misc{XX14,
+ title = {Anteil an Frauen in der Informatik},
+ label = {An},
+ howpublished = {Statistics Worldwide},
+ year = {2014},
+}
+
+ at Online{GI19,
+ author = {{Gesellschaft f^^c3^^bcr Informatik e.\,V.}},
+ label = {GI},
+ year = {2019},
+ url = {http://www.gi.de},
+ urldate = {2019-03-21}
+}
+
+ at Comment{jabref-meta: databaseType:biblatex;}
Property changes on: trunk/Master/texmf-dist/doc/latex/lni/lni-paper-example-de.bib
___________________________________________________________________
Added: svn:eol-style
## -0,0 +1 ##
+native
\ No newline at end of property
Added: trunk/Master/texmf-dist/doc/latex/lni/lni-paper-example-de.tex
===================================================================
--- trunk/Master/texmf-dist/doc/latex/lni/lni-paper-example-de.tex (rev 0)
+++ trunk/Master/texmf-dist/doc/latex/lni/lni-paper-example-de.tex 2019-10-14 20:50:13 UTC (rev 52384)
@@ -0,0 +1,173 @@
+% !TeX encoding = UTF-8
+% !TeX spellcheck = de_DE
+
+%% Dies gibt Warnungen aus, sollten veraltete LaTeX-Befehle verwendet werden
+\RequirePackage[l2tabu, orthodox]{nag}
+
+\documentclass[utf8,biblatex]{lni}
+\bibliography{lni-paper-example-de}
+
+%% Sch^^c3^^b6ne Tabellen mittels \toprule, \midrule, \bottomrule
+\usepackage{booktabs}
+
+%% Zu Demonstrationszwecken
+\usepackage[math]{blindtext}
+\usepackage{mwe}
+
+%% BibLaTeX-Sonderkonfiguration,
+%% falls man schnell eine existierende Bibliographie wiederverwenden will, aber nicht die .bib-Datei h^^c3^^a4ndisch anpassen m^^c3^^b6chte.
+%% Bitte \iffalse und \fi entfernen, dann ist diese Konfiguration aktiviert.
+
+\iffalse
+\AtEveryBibitem{%
+ \ifentrytype{article}{%
+ }{%
+ \clearfield{doi}%
+ \clearfield{issn}%
+ \clearfield{url}%
+ \clearfield{urldate}%
+ }%
+ \ifentrytype{inproceedings}{%
+ }{%
+ \clearfield{doi}%
+ \clearfield{issn}%
+ \clearfield{url}%
+ \clearfield{urldate}%
+ }%
+}
+\fi
+
+\begin{document}
+%%% Mehrere Autoren werden durch \and voneinander getrennt.
+%%% Die Fu^^c3^^9fnote enth^^c3^^a4lt die Adresse sowie eine E-Mail-Adresse.
+%%% Das optionale Argument (sofern angegeben) wird f^^c3^^bcr die Kopfzeile verwendet.
+\title[Ein Kurztitel]{Ein sehr langer Titel ^^c3^^bcber mehrere Zeilen mit sehr vielen Worten und noch mehr Buchstaben}
+%%%\subtitle{Untertitel / Subtitle} % falls ben^^c3^^b6tigt
+\author[Vorname1 Nachname1 \and Vorname2 Nachname2]
+{Vorname1 Nachname1\footnote{Universit^^c3^^a4t, Abteilung, Stra^^c3^^9fe, Postleitzahl Ort, Land \email{emailaddress at author1}} \and
+ Vorname2 Nachname2\footnote{University, Department, Address, Country \email{emailaddress at author2}}}
+\startpage{11} % Beginn der Seitenz^^c3^^a4hlung f^^c3^^bcr diesen Beitrag
+\editor{Herausgeber et al.} % Namen der Herausgeber
+\booktitle{Name-der-Konferenz} % Name des Tagungsband; optional Kurztitel
+\year{2017}
+%%%\lnidoi{18.18420/provided-by-editor-02} % Falls bekannt
+\maketitle
+
+\begin{abstract}
+Die \LaTeX-Klasse \texttt{lni} setzt die Layout-Vorgaben f^^c3^^bcr Beitr^^c3^^a4ge in LNI Konferenzb^^c3^^a4nden um.
+Dieses Dokument beschreibt ihre Verwendung und ist ein Beispiel f^^c3^^bcr die entsprechende Darstellung.
+Der Abstract ist ein kurzer ^^c3^^9cberblick ^^c3^^bcber die Arbeit der zwischen 70 und 150 W^^c3^^b6rtern lang sein und das Wichtigste enthalten sollte.
+Die Formatierung erfolgt automatisch innerhalb des abstract-Bereichs.
+\end{abstract}
+
+\begin{keywords}
+LNI Guidelines \and \LaTeX Vorlage
+\end{keywords}
+
+\section{Verwendung}
+Die GI gibt unter \url{http://www.gi-ev.de/LNI} Vorgaben f^^c3^^bcr die Formatierung von Dokumenten in der LNI Reihe.
+F^^c3^^bcr \LaTeX-Dokumente werden diese durch die Dokumentenklasse \texttt{lni} realisiert.
+
+Dieses Dokument basiert auf der offiziellen Dokumentation, simplifiziert und setzt grundlegendes LaTeX-Wissen voraus.
+Es werden generische Platzhalter an die entsprechenden Stellen (wie beispielsweise die Authoren-Angaben) gesetzt und nicht weiter an anderer Stelle dokumentiert.
+
+Dieses Template ist wie folgt gegliedert:
+\Cref{sec:demos} zeigt Demonstrationen der LNI-Verlage.
+\Cref{sec:lniconformance} zeigt die Einhaltung der Richtlinien durch einfachen Text.
+
+\section{Demonstrationen}
+\label{sec:demos}
+Das Symbol f^^c3^^bcr Potenzmengen ($\powerset$) wird korrekt angezeigt.
+Es ist kein Weierstra^^c3^^9f-p ($\wp$) mehr.
+
+Spitze Klammen k^^c3^^b6nnen direkt eingegeben werden: <test />
+
+Hier eine kleine Demonstration von \href{https://www.ctan.org/pkg/microtype}{microtype}:
+\blindtext
+
+\section{Demonstration der Einhaltung der Richtlinien}
+\label{sec:lniconformance}
+
+\subsection{Literaturverzeichnis}
+Der letzte Abschnitt zeigt ein beispielhaftes Literaturverzeichnis f^^c3^^bcr B^^c3^^bccher mit einem Autor \cite{Ez10} und zwei AutorInnen \cite{AB00}, einem Beitrag in Proceedings mit drei AutorInnen \cite{ABC01}, einem Beitrag in einem LNI Band mit mehr als drei AutorInnen \cite{Az09}, zwei B^^c3^^bccher mit den jeweils selben vier AutorInnen im selben Erscheinungsjahr \cite{Wa14} und \cite{Wa14b}, ein Journal \cite{Gl06}, eine Website \cite{GI19} bzw.\ anderweitige Literatur ohne konkrete AutorInnenschaft \cite{XX14}.
+Es wird biblatex verwendet, da es UTF8 sauber unterst^^c3^^bctzt und \href{https://github.com/gi-ev/LNI/issues/5}{im Gegensatz zu lni.bst} keine Fehler beim bibtexen auftreten.
+
+Referenzen sollten nicht direkt als Subjekt eingebunden werden, sondern immer nur durch Authorenanganben:
+Beispiel: \Citet{AB00} geben ein Beispiel, aber auch \citet{Az09}.
+Hinweis: Gro^^c3^^9fes C bei \texttt{Citet}, wenn es am Satzanfang steht. Dies ist analog zu \texttt{Cref}.
+
+Formatierung und Abk^^c3^^bcrzungen werden f^^c3^^bcr die Referenzen \texttt{book}, \texttt{inbook}, \texttt{proceedings}, \texttt{inproceedings}, \texttt{article}, \texttt{online} und \texttt{misc} automatisch vorgenommen.
+M^^c3^^b6gliche Felder f^^c3^^bcr Referenzen k^^c3^^b6nnen der Beispieldatei \texttt{lni-paper-example-de.bib} entnommen werden.
+Andere Referenzen sowie Felder m^^c3^^bcssen allenfalls nachtr^^c3^^a4glich angepasst werden.
+
+\subsection{Abbildungen}
+\Cref{fig:demo} zeigt eine Abbildung.
+
+\begin{figure}
+ \centering
+ \includegraphics[width=.8\textwidth]{example-image}
+ \caption{Demographik}
+ \label{fig:demo}
+\end{figure}
+
+\subsection{Tabellen}
+\Cref{tab:demo} zeigt eine Tabelle.
+
+\begin{table}
+\centering
+\begin{tabular}{lll}
+\toprule
+^^c3^^9cberschriftsebenen & Beispiel & Schriftgr^^c3^^b6^^c3^^9fe und -art \\
+\midrule
+Titel (linksb^^c3^^bcndig) & Der Titel \ldots & 14 pt, Fett\\
+^^c3^^9cberschrift 1 & 1 Einleitung & 12 pt, Fett\\
+^^c3^^9cberschrift 2 & 2.1 Titel & 10 pt, Fett\\
+\bottomrule
+\end{tabular}
+\caption{Die ^^c3^^9cberschriftsarten}
+\label{tab:demo}
+\end{table}
+
+\subsection{Programmcode}
+Die LNI-Formatvorlage verlangt die Einr^^c3^^bcckung von Listings vom linken Rand.
+In der \texttt{lni}-Dokumentenklasse ist dies f^^c3^^bcr die \texttt{verbatim}-Umgebung realisiert.
+
+\begin{verbatim}
+public class Hello {
+ public static void main (String[] args) {
+ System.out.println("Hello World!");
+ }
+}
+\end{verbatim}
+
+Alternativ kann auch die \texttt{lstlisting}-Umgebung verwendet werden.
+
+\Cref{L1} zeigt uns ein Beispiel, das mit Hilfe der \texttt{lstlisting}-Umgebung realisiert ist.
+
+\begin{lstlisting}[caption={Beschreibung}, label=L1, language=Java]
+public class Hello {
+ public static void main (String[] args) {
+ System.out.println("Hello World!");
+ }
+}
+\end{lstlisting}
+
+\subsection{Formeln und Gleichungen}
+
+Die korrekte Einr^^c3^^bcckung und Nummerierung f^^c3^^bcr Formeln ist bei den Umgebungen
+\texttt{equation} und \texttt{align} gew^^c3^^a4hrleistet.
+
+\begin{equation}
+ 1=4-3
+\end{equation}
+und
+\begin{align}
+ 2&=7-5\\
+ 3&=2-1
+\end{align}
+
+%% \bibliography{lni-paper-example-de.tex} ist hier nicht erlaubt: biblatex erwartet dies bei der Preambel
+%% Starten Sie "biber paper", um eine Biliographie zu erzeugen.
+\printbibliography
+
+\end{document}
Property changes on: trunk/Master/texmf-dist/doc/latex/lni/lni-paper-example-de.tex
___________________________________________________________________
Added: svn:eol-style
## -0,0 +1 ##
+native
\ No newline at end of property
Modified: trunk/Master/texmf-dist/doc/latex/lni/lni.pdf
===================================================================
(Binary files differ)
Modified: trunk/Master/texmf-dist/source/latex/lni/lni.dtx
===================================================================
--- trunk/Master/texmf-dist/source/latex/lni/lni.dtx 2019-10-14 20:46:45 UTC (rev 52383)
+++ trunk/Master/texmf-dist/source/latex/lni/lni.dtx 2019-10-14 20:50:13 UTC (rev 52384)
@@ -116,7 +116,7 @@
\file{lni-paper-example-de.bib}{\from{\jobname.dtx}{exampledebib}}
}
\generate{
- \usepreamble\templatepreger
+ \usepreamble\templatepreger
\file{lni-paper-example-de.tex}{\from{\jobname.dtx}{exampledetex}}
}
\ifx\fmtname\nameofplainTeX
@@ -134,7 +134,7 @@
%<class>\NeedsTeXFormat{LaTeX2e}[1999/12/01]
%<class>\ProvidesClass{lni}
%<*class>
- [2019/04/04 v1.5 Official class for submissions to the ``Lecture Notes
+ [2019/10/14 v1.6BETA Official class for submissions to the ``Lecture Notes
in Informatics'']
%</class>
%<*driver>
@@ -158,7 +158,7 @@
\usepackage{hologo}
\newcommand*{\MiKTeX}{\hologo{MiKTeX}}
\usepackage[%
- pdftitle={lni: Official LaTeX class for submissions to the ``Lecture Notes in
+ pdftitle={lni: Official LaTeX class for submissions to the ``Lecture Notes in
Informatics'', published by the ``Gesellschaft für Informatik e.\,V.'' (GI)},
pdfauthor={Martin Sievers},
urlcolor=blue,%
@@ -179,7 +179,7 @@
}{}
\DeclareMathSymbol{\powerset}{\mathord}{MnSyC}{180}
-\newcommand{\lni}{\texttt{lni}}
+\newcommand{\lni}{\texttt{lni}}
\newcommand{\LNI}{\emph{Lecture Notes in Informatics}}
\makeatletter
\newcommand*\DescribeOption{%
@@ -224,7 +224,7 @@
frame = single,
backgroundcolor = \color{yellow!60},
framesep = 5pt,
- literate={Ö}{{\"O}}1 {Ä}{{\"A}}1 {Ü}{{\"U}}1 {ß}{{\ss}}1 {ü}{{\"u}}1 {ä}{{\"a}}1 {ö}{{\"o}}1
+ literate={Ö}{{\"O}}1 {Ä}{{\"A}}1 {Ü}{{\"U}}1 {ß}{{\ss}}1 {ü}{{\"u}}1 {ä}{{\"a}}1 {ö}{{\"o}}1
}%
\lstnewenvironment{examplecode}[1][]
{\lstset{#1}}
@@ -260,37 +260,51 @@
% Right brace \} Tilde \~}
%
% \changes{v1.0}{2017/04/07}{Official release of revised version}
-% \changes{v1.1}{2017/04/08}{Added macros \cs{subtitle} and keyword delimiter
+% \changes{v1.1}{2017/04/08}{Added macros \cs{subtitle} and keyword delimiter
% \cs{add}}
% \changes{v1.1}{2017/04/08}{Fixed bug with \cs{Crefname}}
-% \changes{v1.1}{2017/04/08}{Updated documentation and bundle structure}
-% \changes{v1.1}{2017/04/12}{Changed spacing for \cs{subtitle}}
+% \changes{v1.1}{2017/04/08}{Updated documentation and bundle structure}
+% \changes{v1.1}{2017/04/12}{Changed spacing for \cs{subtitle}}
% \changes{v1.1}{2017/04/18}{Added check for ngerman-x-latest patterns}
% \changes{v1.1}{2017/04/19}{Added option \opt{crop}}
-% \changes{v1.2}{2017/04/26}{Set option \opt{straighquotes} for \pkg{newtxtt}
+% \changes{v1.2}{2017/04/26}{Set option \opt{straighquotes} for \pkg{newtxtt}
% manually to gain compatibility with version prior to v1.05}
-% \changes{v1.2}{2017/04/27}{Added \pkg{iftex} to check for pdflatex}
-% \changes{v1.2}{2017/05/04}{Added (partial) support for XeTeX and LuaTeX}
-% \changes{v1.3}{2017/05/04}{Added option \opt{nofonts} to suppress font
-% loading completely}
-% \changes{v1.3}{2017/05/08}{Changed syntax for \pkg{fontspec}}
+% \changes{v1.2}{2017/04/27}{Added \pkg{iftex} to check for pdflatex}
+% \changes{v1.2}{2017/05/04}{Added (partial) support for XeTeX and LuaTeX}
+% \changes{v1.3}{2017/05/04}{Added option \opt{nofonts} to suppress font
+% loading completely}
+% \changes{v1.3}{2017/05/08}{Changed syntax for \pkg{fontspec}}
% \changes{v1.4}{2017/05/27}{Added new macros taken from the EMISA class file}
% \changes{v1.4}{2017/05/27}{Added option \opt{oldfonts} to use a font package
% available}
-% \changes{v1.4}{2017/07/26}{Added package \pkg{caption} and changed all
+% \changes{v1.4}{2017/07/26}{Added package \pkg{caption} and changed all
% \cs{fontsize} calls to nativ \LaTeX{} macros}
% \changes{v1.4}{2017/09/11}{Fixed basewidth for \env{lstlistings}}
% \changes{v1.4}{2017/09/29}{Fixed font size for \cs{Large}}
% \changes{v1.4}{2017/11/08}{Added full example for an article in German}
% \changes{v1.4}{2017/11/08}{Adapting captions of \env{lstlistings}}
-% \changes{v1.4}{2017/11/08}{Fix font size bug regarding the running header
+% \changes{v1.4}{2017/11/08}{Fix font size bug regarding the running header
% and the captions: \cs{small} was redefined, so we need an \cs{oldsmall} here}
% \changes{v1.5}{2018/09/11}{Postpone loading of \pkg{cleveref}}
-% \changes{v1.5}{2018/09/11}{Load \pkg{textcomp} by default and add option
+% \changes{v1.5}{2018/09/11}{Load \pkg{textcomp} by default and add option
% \opt{upquote} to \pkg{listings}}
% \changes{v1.5}{2019/02/13}{Fix layout for English texts}
% \changes{v1.5}{2019/02/13}{Changed \cs{refname} for English texts}
% \changes{v1.5}{2019/02/20}{New option \opt{norunningheads}}
+% \changes{v1.6}{2019/04/18}{\cs{email} now generates a mailto: hyperlink}
+% \changes{v1.6}{2019/04/23}{Global options are passed to article class}
+% \changes{v1.6}{2019/09/14}{New macro \cs{booksubtitle}}
+% \changes{v1.6}{2019/09/14}{Add option `driver=none` to `geometry` for better
+% crop results}
+% \changes{v1.6}{2019/09/14}{\cs{booktitle} now uses an optional argument for
+% shorttitle}
+% \changes{v1.6}{2019/09/14}{New macro \cs{booksubtitle}}
+% \changes{v1.6}{2019/09/14}{\pkg{hypcap} is only loaded if \pkg{hyperref}
+% has been loaded before.}
+% \changes{v1.6}{2019/09/14}{\pkg{hyperref} is loaded without options to make
+% it more compatible with other packages like \pkg{authorarchive}}
+% \changes{v1.6}{2019/10/14}{Fix for BibTeX style}
+% \changes{v1.6}{2019/10/14}{Add support for \pkg{selnolig}}
%
% \GetFileInfo{\jobname.dtx}
% \DoNotIndex{\newcommand,\newenvironment}
@@ -298,7 +312,7 @@
% \title{\textsf{lni} -- Official class for submissions to the\\%
% ``Lecture Notes in Informatics''\thanks{This file describes version
% \fileversion, last revised \filedate.}}
-% \author{Martin Sievers\setcounter{footnote}{6}\thanks{Email:
+% \author{Martin Sievers\setcounter{footnote}{6}\thanks{Email:
% martin.sievers at schoenerpublizieren.de}}
% \date{Released \filedate}
%
@@ -305,118 +319,118 @@
% \maketitle
%
% \begin{abstract}
-% \noindent After several years the \lni{} bundle has been updated. The
+% \noindent After several years the \lni{} bundle has been updated. The
% resulting new version fixes some long-standing bugs, solves problems and
-% supports modern packages like \pkg{biblatex} and \pkg{microtype}. It has been
-% put into one DTX file to make maintaining and distributing via CTAN a bit
+% supports modern packages like \pkg{biblatex} and \pkg{microtype}. It has been
+% put into one DTX file to make maintaining and distributing via CTAN a bit
% easier.
% \end{abstract}
%
% \section{Introduction}
-% \LaTeX{} templates are often long-lasting. Even if they use meanwhile
-% deprecated packages they are often passed from one generation of authors to
+% \LaTeX{} templates are often long-lasting. Even if they use meanwhile
+% deprecated packages they are often passed from one generation of authors to
% the next.
%
-% The Gesellschaft für Informatik~e.\,V. (GI) thankfully realized, that their
-% bundle should be technologically
+% The Gesellschaft für Informatik~e.\,V. (GI) thankfully realized, that their
+% bundle should be technologically
% modernized while the general layout remains the same.
%
-% Based on the existing class and bib files I set-up a DTX file and started
-% reworking the source code. Editors and authors suggested different additions
-% and changes, which I tried to incoporate without changing the existing
+% Based on the existing class and bib files I set-up a DTX file and started
+% reworking the source code. Editors and authors suggested different additions
+% and changes, which I tried to incoporate without changing the existing
% mechanisms too much.
%
% This is the first public release. I would to thank especially
% \href{https://github.com/koppor/}{Oliver Kopp} and
-% \href{https://www.fernuni-hagen.de/evis/team/stefan.strecker.shtml}{Stefan
+% \href{https://www.fernuni-hagen.de/evis/team/stefan.strecker.shtml}{Stefan
% Strecker} and his team for their suggestions and tests.
-%
+%
% \section{Installation}
-% The \lni{} bundle is currently distributed via
+% The \lni{} bundle is currently distributed via
% \href{https://github.com/gi-ev/LNI}{GitHub}, the
% \href{https://www.gi.de/service/publikationen/lni/autorenrichtlinien.html}
% {GI website} and (preferably) \href{https://www.ctan.org/pkg/lni}{CTAN}.
% The later is the basis for all updates of the two main \TeX{} distributions
-% \MiKTeX{} and \TeX{}~Live. Thus the easiest way to get all files needed to
+% \MiKTeX{} and \TeX{}~Live. Thus the easiest way to get all files needed to
% typeset an article for the \LNI{} is to use the package manager of your
% distribution.
-%
-% For a manual installation please call \texttt{pdflatex lni.dtx} at least
-% twice and
-% copy all resulting files (cls, tex, pdf and bst) to your local TEXMF tree.
+%
+% For a manual installation please call \texttt{pdflatex lni.dtx} at least
+% twice and
+% copy all resulting files (cls, tex, pdf and bst) to your local TEXMF tree.
% Don't forget to update your file name database.
% \newpage
% \section{Usage}
-% To use the predefined layout for a (German) submission to the \LNI{} just
+% To use the predefined layout for a (German) submission to the \LNI{} just
% load the class file as usual with \cs{documentclass\{lni\}}.
%
-% The class file loads a bunch of packages which are all part of modern \TeX{}
-% distributions. Therefore, if you are confronted
-% with a missing package, please try to download and install it using your
-% distribution's package manager. Alternatively go to
+% The class file loads a bunch of packages which are all part of modern \TeX{}
+% distributions. Therefore, if you are confronted
+% with a missing package, please try to download and install it using your
+% distribution's package manager. Alternatively go to
% \href{http://www.ctan.org}{CTAN} to download missing packages.
%
-% Please note, that the support of \hologo{XeLaTeX} and \hologo{LuaLaTeX} is
-% only partial. For example the mono font is not the same. Moreover
-% \hologo{pdfLaTeX} is a \TeX{} engine used by the publishers. Therefore it is
-% strongly recommended to use \hologo{pdfLaTeX}.
-%
+% The \lni{} class can be used with \hologo{pdfLaTeX} as well as with
+% \hologo{XeLaTeX} and \hologo{LuaLaTeX}. To achieve same results, the
+% Type1-based packages \pkg{newtxtext}, \pkg{newtxmath} and \pkg{newtxtt}
+% are used even for the unicode engines.
+%
% \subsection{Options}\label{sec:options}
-% Although the class file includes all layout information for a submission to
+% Although the class file includes all layout information for a submission to
% the \LNI{}, there are options to adapt the output one way or another.
%
-% \DescribeOption{english}A document loading the \lni{} class file uses German
-% language adoptions by default. To switch to English, just load the class with
+% \DescribeOption{english}A document loading the \lni{} class file uses German
+% language adoptions by default. To switch to English, just load the class with
% option \opt{english}.
%
-% The language influences not only the hyphenation patterns and terms used in
-% the text, but also the choice of a corresponding \BibTeX{} file
+% The language influences not only the hyphenation patterns and terms used in
+% the text, but also the choice of a corresponding \BibTeX{} file
% (cf.~\cref{sec:bibliography}).
%
-% \DescribeOption{utf8}\DescribeOption{latin1}\DescribeOption{applemac}Although
-% nowadays all major plattforms support and widely use UTF-8 encoding for
+% \DescribeOption{utf8}\DescribeOption{latin1}\DescribeOption{applemac}Although
+% nowadays all major plattforms support and widely use UTF-8 encoding for
% text files, there might be some need to change the input encoding the
% \LaTeX{} document uses.
%
-% This can be achieved by giving one of the options \opt{utf8} (which is the
+% This can be achieved by giving one of the options \opt{utf8} (which is the
% default), \opt{latin1} or \opt{applemac} to the document class. Using UTF-8
% is strongly recommended. Please note, that currently the bib file is supposed
% to use the same encoding.
%
-% \DescribeOption{biblatex}Nowadays bibliographies cannot only be produced with
-% \BibTeX{}, but with a much more powerful approach consisting of the package
+% \DescribeOption{biblatex}Nowadays bibliographies cannot only be produced with
+% \BibTeX{}, but with a much more powerful approach consisting of the package
% \pkg{biblatex} and the tool \texttt{biber}.
%
-% There is even a specialized package \pkg{biblatex-lni} which is automatically
-% used when setting the class option \opt{biblatex}. For more information see
+% There is even a specialized package \pkg{biblatex-lni} which is automatically
+% used when setting the class option \opt{biblatex}. For more information see
% as well \cref{sec:bibliography}.
%
% \DescribeOption{crop\space(new in v1.1)}%
-% Option \opt{crop} gives you some crop marks (using the package \pkg{crop}) to
-% better illustrate the final
+% Option \opt{crop} gives you some crop marks (using the package \pkg{crop}) to
+% better illustrate the final
% result of your article.
%
% \DescribeOption{nocleveref}When referencing figures, one has to type
% \texttt{Figure\textasciitilde}\cs{ref\marg{label}}. The package \pkg{cleveref}
% reduces the effort by offering the command \cs{cref\marg{label}}. This can be
-% used with all floating objects. The package is loaded as default. In case it
+% used with all floating objects. The package is loaded as default. In case it
% causes issues, one can disable it using with the \opt{nocleveref} option.
%
-% \DescribeOption{nohyperref}\pkg{hyperref} is used for colored hyperlinks
-% within the articles. If you consider problems or just do not want that
+% \DescribeOption{nohyperref}\pkg{hyperref} is used for colored hyperlinks
+% within the articles. If you consider problems or just do not want that
% feature, you can disable it by using the option \opt{nohyperref}.
%
-% \DescribeOption{nofonts\space(new in v1.3, deprecated in v1.4)}On old systems
-% you might not have installed the New TX fonts. If for whatever reason the
-% \opt{oldfonts} option
-% does not work for you, you can activate option \opt{nofonts}. This allows to
+% \DescribeOption{nofonts\space(new in v1.3, deprecated in v1.4)}On old systems
+% you might not have installed the New TX fonts. If for whatever reason the
+% \opt{oldfonts} option
+% does not work for you, you can activate option \opt{nofonts}. This allows to
% suppress font loading completely using the engines standard fonts instead.
-% Usually there should be no need to do so. Please note, that your output will
+% Usually there should be no need to do so. Please note, that your output will
% differ from the publishers'.
%
% \DescribeOption{oldfonts\space(new in v1.4)}On older systems you might not
% have installed the New TX fonts. Therefore option \opt{oldfonts} allows to
-% to load the package \pkg{mathptmx} instead of the New TX fonts. The output
+% to load the package \pkg{mathptmx} instead of the New TX fonts. The output
% will be in accordance to (or at least near) the publisher's requirements.
%
% \DescribeOption{norunningheads\space(new in v1.5)}To easily remove all running
@@ -423,36 +437,40 @@
% headers from your document, you can use the option \opt{norunningheads}.
% \newpage
% \section{Setting up a document}
-% You can use the file \file{lni-author-template.tex} as a starting point
-% for setting up a document for submission. The \lni{} class uses the standard
+% You can use the file \file{lni-author-template.tex} as a starting point
+% for setting up a document for submission. The \lni{} class uses the standard
% ways to build an article.
%
% \subsection{Special meta data}\label{sec:metadata}
-% There is not just one \enquote{\TeX} and one \enquote{bibliography tool}, but
+% There is not just one \enquote{\TeX} and one \enquote{bibliography tool}, but
% many different ways to transform a .tex file into a PDF.
-% Some \TeX{} editors like \texttt{TeXstudio}, \texttt{TeXmaker} and
-% \texttt{TeXshop} support a special set of meta data to tell the editor, how
+% Some \TeX{} editors like \texttt{TeXstudio}, \texttt{TeXmaker} and
+% \texttt{TeXshop} support a special set of meta data to tell the editor, how
% to deal with a concrete document.
-%
+%
% A typical example looks like:
% \begin{examplecode}
% % !TeX program = pdflatex
% % !BIB program = bibtex8
% % !TeX encoding = UTF-8
-% !TeX spellcheck = de_DE
+% % !TeX spellcheck = de_DE
% \documentclass[english]{lni}
% \end{examplecode}
%
% \subsection{Special macros for editors}
-% \DescribeMacro{\startpage}\DescribeMacro{\editor}\DescribeMacro{\booktitle}%
-% \DescribeMacro{\year}In addition to the macros stated in
+% \DescribeMacro{\startpage}\DescribeMacro{\editor}%
+% \DescribeMacro{\booktitle\space(changed in v1.6)}%
+% \DescribeMacro{\booksubtitle\space(new in v1.6)}%
+% \DescribeMacro{\year}In addition to the macros stated in
% \cref{sec:titlepage} for authors, there are special editor macros to
% influence the layout of the article:
% \begin{itemize}
-% \item\cs{startpage} determines the starting page of the article. This
+% \item\cs{startpage} determines the starting page of the article. This
% should always be an odd (right) page.
% \item\cs{editor} states the name of the editor(s)
-% \item\cs{booktitle} holds the name of a conference
+% \item\cs{booktitle} holds the name of a conference (optional argument for
+% a short title used in the running headers)
+% \item\cs{booksubtitle} holds an optional subtitle of a conference
% \item\cs{year} can be used to set the year
% \end{itemize}
%
@@ -459,28 +477,28 @@
% \subsection{Title page}\label{sec:titlepage}
% \DescribeMacro{\title}%
% \DescribeMacro{\subtitle\space(new in v1.1)}%
-% The title of your work is given using the \cs{title} macro. In addition to
-% the title itself, you can add a short title to be used
+% The title of your work is given using the \cs{title} macro. In addition to
+% the title itself, you can add a short title to be used
% in the header of a page:
% \begin{examplecode}[label={lst:title}]
% \title[Short title]{Title}
% \end{examplecode}
-%
-% You can also add a subtitle by \cs{substitle\marg{subtitle}}.
-%
+%
+% You can also add a subtitle by \cs{subtitle\marg{subtitle}}.
+%
% \DescribeMacro{\author}\DescribeMacro{\email}\DescribeMacro{\footnote}%
% \DescribeMacro{\and}%
-% The authors of an article are
-% given using the standard \cs{author} macro. Multiple authors are separated
-% by \cs{and}; affiliations have to be added with
-% \cs{footnote\marg{affiliations}} where you can use
+% The authors of an article are
+% given using the standard \cs{author} macro. Multiple authors are separated
+% by \cs{and}; affiliations have to be added with
+% \cs{footnote\marg{affiliations}} where you can use
% \cs{email\marg{email address}} for the email address of an author:
-% \begin{examplecode}[label={lst:author}]
+% \begin{examplecode}[label={lst:author}]
% \author[Author 1 \and Author 2]{%
% Author 1\footnote{Affiliations including \email{email at author1}} \and%
% Author 2\footnote{Affiliations including \email{email at author2}}}
% \end{examplecode}
-% In case the authors are too long for the page header, see
+% In case the authors are too long for the page header, see
% \cref{sec:pageheader} of how to shorten the authors for the page header.
%
% \DescribeMacro{\lnidoi\space(new in v1.2)}%
@@ -495,13 +513,13 @@
% \subsection{Abstract and keywords}
% \DescribeEnv{abstract}\DescribeEnv{keywords}%
% \DescribeMacro{\and\space(new in v1.1)}%
-% Each article should start with a short (70 to 150 words) abstract and some
-% keywords. Please use the environments \env{abstract} and \env{keywords} for
+% Each article should start with a short (70 to 150 words) abstract and some
+% keywords. Please use the environments \env{abstract} and \env{keywords} for
% that purpose:
% \begin{examplecode}
% \begin{abstract}
% Tell the reader what your article is about
-% \end{abstract}
+% \end{abstract}
% \begin{keywords}
% Give some keywords to categorize your article. You can use \and between two
% keywords to get the correct delimiter (semicolon plus space) automatically.
@@ -510,8 +528,8 @@
%
% \subsection{Page header}\label{sec:pageheader}
% The template automatically sets the page headers according to the
-% requirements of \LNI. From page~2 onwards, the title and the authors are
-% printed. These information has to stay in one line. In case the title is too
+% requirements of \LNI. From page~2 onwards, the title and the authors are
+% printed. These information has to stay in one line. In case the title is too
% long, use the optional argument for \cs{title}:
% \begin{examplecode}
% \title[Short title]{Title}
@@ -521,7 +539,7 @@
% In case there are many authors on a paper, they might not fit into the paper.
% For that purpose, additionally use \cs{authorrunning}:
% \begin{examplecode}
-% \author[Firstname1 Lastname1 \and Firstname2 Lastname2%
+% \author[Firstname1 Lastname1 \and Firstname2 Lastname2%
% \and Firstname3 Lastname3]{Firstname1 Lastname1\footnote{...}%
% \and Firstname2 Lastname2\footnote{...}%
% \and Firstname3 Lastname3\footnote{...}}%
@@ -532,34 +550,34 @@
% \subsubsection{Headings}
% \DescribeMacro{\section}\DescribeMacro{\subsection}%
% \DescribeMacro{\subsubsection}
-% You can use the standard macros \cs{section}, \cs{subsection}, \dots{} for
+% You can use the standard macros \cs{section}, \cs{subsection}, \dots{} for
% sectioning your text.
-%
+%
% \subsubsection{Footnotes}
% \DescribeMacro{\footnote}%
-% For adding a footnote, just use \cs{footnote\marg{footnote text}} where
-% needed. Please note, that the footnote counter is automatically set to the
-% correct value at the beginning of your text, i.\,e. it respects the number
+% For adding a footnote, just use \cs{footnote\marg{footnote text}} where
+% needed. Please note, that the footnote counter is automatically set to the
+% correct value at the beginning of your text, i.\,e. it respects the number
% of affiliations given on the title page.
%
% \subsubsection{Lists}
% \DescribeEnv{itemize}\DescribeEnv{enumerate}%
-% The \lni{} class redefines the standard lists environments \env{itemize} and
+% The \lni{} class redefines the standard lists environments \env{itemize} and
% \env{enumerate} to meet the requirements of the \LNI{}.
-%
+%
% Lists can be filled as usual by adding \cs{item} macros.
%
% \subsubsection{Floating objects}
% \DescribeEnv{figure}\DescribeEnv{table}%
-% The environments \env{figure} and \env{table} can be used the standard way to
+% The environments \env{figure} and \env{table} can be used the standard way to
% include graphics or tables resp.
%
-% However, please note, that the default placement parameters are changed to
-% \opt{htbp} by the class \lni{}. If you need some local adjustment, please use
+% However, please note, that the default placement parameters are changed to
+% \opt{htbp} by the class \lni{}. If you need some local adjustment, please use
% the optional argument of both environments (cf.~Listing~\ref{lst:figure}).
%
% \DescribeMacro{\caption}\DescribeMacro{\label}
-% A caption should be added by \cs{caption\marg{caption text}}, followed
+% A caption should be added by \cs{caption\marg{caption text}}, followed
% immediately by a \cs{label\marg{unique label}} entry.
% \begin{examplecode}[label={lst:figure}]
% \begin{figure}[tb]
@@ -569,8 +587,8 @@
% \end{figure}
% \end{examplecode}
%
-% If you want to center floats, please \emph{do not} use the \env{center}
-% environment, but the macro \cs{centering}, which does not add extra white
+% If you want to center floats, please \emph{do not} use the \env{center}
+% environment, but the macro \cs{centering}, which does not add extra white
% space (cf.~Listing~\ref{lst:table}).
% \begin{examplecode}[label={lst:table}]
% \begin{table}
@@ -584,28 +602,28 @@
% \end{examplecode}
%
% \subsubsection{Listings\,/\,Source code}
-% The \lni{} bundle loads the \pkg{verbatim} and \pkg{listings} package. While
-% the former is there for compatability, the later is the standard way of
+% The \lni{} bundle loads the \pkg{verbatim} and \pkg{listings} package. While
+% the former is there for compatability, the later is the standard way of
% integrating source code listings into a \LaTeX{} document.
%
-% However, there are currently no config files shipped with the \lni{} bundle.
-% Please consult the documentation for help on setting up \pkg{listings} for a
+% However, there are currently no config files shipped with the \lni{} bundle.
+% Please consult the documentation for help on setting up \pkg{listings} for a
% specific programming language.
%
% \subsubsection{Math}
-% If you need mathematics, you can load packages \pkg{amsmath} and
-% \pkg{mathtools} for
-% additional features. The \lni{} class offers by default the command
-% \cs{powerset} to render the powerset symbol correctly as $\powerset$ and not
+% If you need mathematics, you can load packages \pkg{amsmath} and
+% \pkg{mathtools} for
+% additional features. The \lni{} class offers by default the command
+% \cs{powerset} to render the powerset symbol correctly as $\powerset$ and not
% as Weierstrass p ($\wp$).
%
% \subsubsection{Abbreviations and initialisms}
% \DescribeMacro{\eg}\DescribeMacro{\ie}\DescribeMacro{\cf}%
% \DescribeMacro{\etal}%
-% To achieve consistent typesetting of common abbreviations, macros are
-% predefined by the class. These macros should \emph{consistently} being used
-% instead of writing the plain version. For example use \verb|\eg| rather than
-% {\verb|e.g.,|}. The macros take care of spacing within and after the
+% To achieve consistent typesetting of common abbreviations, macros are
+% predefined by the class. These macros should \emph{consistently} being used
+% instead of writing the plain version. For example use \verb|\eg| rather than
+% {\verb|e.g.,|}. The macros take care of spacing within and after the
% abbreviations.
% \begin{itemize}
% \item \cs{eg} for e.\,g.
@@ -615,9 +633,9 @@
% \end{itemize}
%
% \DescribeMacro{\OMG}\DescribeMacro{\BPM}\DescribeMacro{\BPMN}\DescribeMacro{\UML}%
-% In addition to common abbreviations, further initialisms are provided by the
-% class for convenience and for a consistent visual appearance. Note that the
-% class uses \textsc{smallcaps} for typesetting initialisms. The list of
+% In addition to common abbreviations, further initialisms are provided by the
+% class for convenience and for a consistent visual appearance. Note that the
+% class uses \textsc{smallcaps} for typesetting initialisms. The list of
% predefined initialisms comprises:
%
% \begin{itemize}
@@ -628,41 +646,41 @@
% \item \cs{UML} for \textsc{uml} (Unified Modelling Language).
% \end{itemize}
%
-% \DescribeMacro{\lniinitialism} You can add your own initialisms by stating
+% \DescribeMacro{\lniinitialism} You can add your own initialisms by stating
% \cs{lniinitialism\marg{\textbackslash initialism\_macro}\marg{text}} in the
% preamble.
%
% \subsection{Bibliography}\label{sec:bibliography}
-% \enlargethispage{\baselineskip}The old \lni{} class file only supports
-% \BibTeX{} with bst files for German
+% \enlargethispage{\baselineskip}The old \lni{} class file only supports
+% \BibTeX{} with bst files for German
% and English submissions resp. If you want to use this approach for your
% article you have to add \cs{bibliography\marg{Bib file}} at an appropriate
% position within your text. The correct bst file is loaded automatically.
-%
-% With option
+%
+% With option
% \opt{biblatex} (cf.~\cref{sec:options}) you can easily switch to the modern
-% \pkg{biblatex} package. However, you have to add information on the bib
-% file(s) in your preamble using \cs{addbibresource\marg{Bib file(s)}} and call
+% \pkg{biblatex} package. However, you have to add information on the bib
+% file(s) in your preamble using \cs{addbibresource\marg{Bib file(s)}} and call
% \cs{printbibliography} where you want the bibliography to appear.
%
-% Please note, that the \lni{} class sets
-% \texttt{biber} as the default bibliography tool. \texttt{biber} is part of
-% both major \TeX{} distributions and can easily be used within most \TeX{}
+% Please note, that the \lni{} class sets
+% \texttt{biber} as the default bibliography tool. \texttt{biber} is part of
+% both major \TeX{} distributions and can easily be used within most \TeX{}
% editors, e.\,g. by using special meta data as described in
% \cref{sec:metadata}.
%
-% If you want to pass settings to \pkg{biblatex} you can use a config
-% file \texttt{biblatex.cfg}, for additional options please use the macro
+% If you want to pass settings to \pkg{biblatex} you can use a config
+% file \texttt{biblatex.cfg}, for additional options please use the macro
% \cs{ExecuteBibliographyOptions}. Please consult the
% \href{http://texdoc.net/pkg/biblatex}{package's documentation} for
% more information.
% \begin{examplecode}
% % !TeX program = pdflatex
-% % !BIB program = biber
+% % !BIB program = biber
% \documentclass[biblatex]{lni}
% ...
% \ExecuteBibliographyOptions{...}
-% \addbibresource{FILENAME.bib}
+% \addbibresource{FILENAME.bib}
% ...
% \begin{document}
% ...
@@ -698,10 +716,10 @@
% \texttt{!Package xkeyval Error: 'family\_i'
% undefined in families blx at opt@name}\\\texttt{part'.},\\
% it is an indicator that you
-% switched from \BibTeX{} to \pkg{biblatex}. Clean up (remove
+% switched from \BibTeX{} to \pkg{biblatex}. Clean up (remove
% \texttt{paper.bbl}) and recompile.
-% \item Errors with \BibTeX: The bst files may still report errors, although
-% the output is okay. This will be solved as soon as possible. However, you
+% \item Errors with \BibTeX: The bst files may still report errors, although
+% the output is okay. This will be solved as soon as possible. However, you
% might consider switching to \pkg{biblatex} (cf.~\cref{sec:bibliography}).
% \end{itemize}
%
@@ -763,7 +781,7 @@
\newif\ifnorunningheads
\DeclareOption{norunningheads}{\norunningheadstrue}
\ExecuteOptions{utf8}
-\DeclareOption*{\ClassWarning{Option `\CurrentOption` is not supported!}}
+\DeclareOption*{\PassOptionsToClass{\CurrentOption}{article}}
\ProcessOptions\relax
%
\RequirePackage{iftex}
@@ -805,17 +823,17 @@
{%
\RequirePackage{newtxtext}
\RequirePackage{newtxmath}
- \RequirePackage[zerostyle=b,scaled=.9]{newtxtt}
+ \RequirePackage[zerostyle=b,scaled=.9]{newtxtt}
% \end{macrocode}
-% For compatibility with version of \pkg{newtxtt} prior to v1.05 we set the
+% For compatibility with version of \pkg{newtxtt} prior to v1.05 we set the
% option \opt{straightquotes} manually for recent versions
% \begin{macrocode}
\@ifpackagelater{newtxtt}{2014/11/18}%
{\txtt at upqtrue}%
- {\ClassWarning{lni}{You are using an old version of
- `newtxtt'.\MessageBreak
+ {\ClassWarning{lni}{You are using an old version of
+ `newtxtt'.\MessageBreak
Option `straightquotes' will not be used!}}%
-% \end{macrocode}
+% \end{macrocode}
% \begin{macrocode}
}%
{\IfFileExists{mathptmx.sty}
@@ -822,7 +840,7 @@
{\oldfontstrue}%
{\nofontstrue}%
}%
-% \end{macrocode}
+% \end{macrocode}
% for \hologo{XeTeX} or \hologo{LuaTeX} we use \pkg{fontspec}
% \begin{macrocode}
\else%
@@ -845,8 +863,8 @@
{\oldfontstrue}%
{\nofontstrue}%
}%
- \fi%
-\fi%
+ \fi%
+\fi%
\ifoldfonts
\RequirePackage{mathptmx}
\else%
@@ -871,6 +889,16 @@
\RequirePackage[%
final,%
protrusion=alltext-nott]{microtype}%
+% \end{macrocode}
+% When using \hologo{LuaLaTeX} we can activate \pkg{selnolig}
+% \begin{macrocode}
+ \ifluatex
+ \iflnienglish
+ \RequirePackage[english]{selnolig}%
+ \else
+ \RequirePackage[ngerman]{selnolig}%
+ \fi%
+ \fi%
\fi%
\SetTracking{encoding=*,shape=sc}{50}%
% \end{macrocode}
@@ -889,11 +917,12 @@
}{}
\DeclareMathSymbol{\powerset}{\mathord}{MnSyC}{180}
% \end{macrocode}
+% \begin{macrocode}
% Support for CC icons
\RequirePackage{ccicons}
% Support for \cs{ifdefempty}
\RequirePackage{etoolbox}
-% Satzspiegel
+% \end{macrocode}
% \begin{macrocode}
\newlength{\doihoffset}
\newlength{\doivoffset}
@@ -904,7 +933,8 @@
includehead,
headheight=20.39pt,
headsep=.31cm,
- centering]
+ centering,
+ driver=none]
{geometry}
\RequirePackage[a4,center,cam,info]{crop}
\renewcommand*\CROP@@info{{%
@@ -951,7 +981,7 @@
\setlength{\doivoffset}{4.3cm}
\fi%
% \end{macrocode}
-% We change \cs{small} and \cs{Large} to get the correct baseline skips and add
+% We change \cs{small} and \cs{Large} to get the correct baseline skips and add
% an \cs{oldsmall}
% \begin{macrocode}
\let\oldsmall\small%
@@ -1016,7 +1046,7 @@
captionpos=b,%
upquote}%
% \end{macrocode}
-% Ragged bottom -- verhindert die Ausdehnung der Seite = Veränderung der
+% Ragged bottom -- verhindert die Ausdehnung der Seite = Veränderung der
% Abstände
% \begin{macrocode}
\def\thisbottomragged{\def\@textbottom{\vskip\z@ plus.0001fil
@@ -1046,7 +1076,7 @@
\fi}
% \end{macrocode}
% \begin{macro}{\title}
-% \begin{macrocode}
+% \begin{macrocode}
\renewcommand{\title}{\@dblarg\@@title}
\def\@@title[#1]#2{\gdef\@shorttitle{#1}\gdef\@title{#2}}
% \end{macrocode}
@@ -1071,7 +1101,7 @@
% \end{macro}
% \begin{macro}{\email}
% \begin{macrocode}
-\newcommand*{\email}[1]{{\urlstyle{same}\protect\url{#1}}}
+\newcommand*{\email}[1]{\href{mailto:#1}{\urlstyle{same}\protect\nolinkurl{#1}}}
% \end{macrocode}
% \end{macro}
% \begin{macro}{\lnidoi}
@@ -1110,7 +1140,7 @@
\else
\thispagestyle{plain}
\fi%
- \@thanks
+ \@thanks
\endgroup
\global\let\thanks\relax
\global\let\maketitle\relax
@@ -1173,7 +1203,7 @@
\renewenvironment*{abstract}{%
\renewcommand{\abstractname}{Abstract}%
\small\noindent\ignorespaces{\bfseries\abstractname:\ }%
-}{\endquotation}
+}{\endquotation}
% \end{macrocode}
% \end{environment}
% \begin{environment}{keywords}
@@ -1186,16 +1216,16 @@
{\global\keywordsfalse}
\let\@RIGsection\section
\pretocmd\@startsection{\ifkeywords\ClassError{lni}{keywords is an environment, not a macro}%
- {Please change \string\keywords\space to an environment}\keywordsfalse\fi}{}{}
+ {Please change \string\keywords\space to an environment}\keywordsfalse\fi}{}{}
% \end{macrocode}
% \end{environment}
% Section headings
% \begin{macrocode}
\renewcommand{\section}{\@startsection{section}{1}{\z@}%
- {-16\p@ \@plus -4\p@ \@minus -4\p@}{5\p@ \@plus 4\p@ \@minus
+ {-16\p@ \@plus -4\p@ \@minus -4\p@}{5\p@ \@plus 4\p@ \@minus
4\p@}{\large\bfseries}}
\renewcommand{\subsection}{\@startsection{subsection}{2}{\z@}%
- {-16\p@ \@plus -4\p@ \@minus -4\p@}{8\p@ \@plus 4\p@ \@minus
+ {-16\p@ \@plus -4\p@ \@minus -4\p@}{8\p@ \@plus 4\p@ \@minus
4\p@}{\normalsize\bfseries}}
% \end{macrocode}
% Bildunterschriften
@@ -1262,9 +1292,9 @@
\ifnum \@itemdepth >\thr@@\@toodeep\else
\setlength{\labelsep}{0.70cm}%Abstand zum Aufzählungspunkt
\advance\@itemdepth\@ne
- \edef\@itemitem{labelitem\romannumeral\the\@itemdepth}%
+ \edef\@itemitem{labelitem\romannumeral\the\@itemdepth}%
\expandafter
- \list
+ \list
\csname\@itemitem\endcsname
{\def\makelabel##1{\hss\llap{##1}}%
\setlength{\itemsep}{8pt}%
@@ -1272,13 +1302,13 @@
\fi}
% \end{macrocode}
% and numbered lists
-% \begin{macrocode}
+% \begin{macrocode}
\renewcommand{\labelenumii}{\alph{enumii})}
- \renewcommand*\enumerate{%
+ \renewcommand*\enumerate{%
\ifnum \@enumdepth >\thr@@
\@toodeep
\else
- \setlength{\labelsep}{0.70cm}%Abstand zur Aufzählungsnummer
+ \setlength{\labelsep}{0.70cm}%Abstand zur Aufzählungsnummer
\advance\@enumdepth \@ne
\edef\@enumctr{enum\romannumeral\the\@enumdepth}%
\fi
@@ -1287,7 +1317,7 @@
\expandafter\list\csname label\@enumctr\endcsname{%
\usecounter{\@enumctr}%
\def\makelabel##1{\hss\llap{##1}}
- \setlength{\labelsep}{0.6cm} %Einrückung des Aufzählungszeichens
+ \setlength{\labelsep}{0.6cm} %Einrückung des Aufzählungszeichens
\setlength{\itemsep}{8pt}%
\setlength{\parsep}{-2pt}}
}%
@@ -1322,10 +1352,13 @@
% \end{macro}
% \begin{macro}{\booktitle}
% \begin{macrocode}
-\newcommand*{\@booktitle}{}
-\newcommand*{\booktitle}[1]{\renewcommand{\@booktitle}{#1}}
+\newcommand{\booktitle}{\@dblarg\@@booktitle}
+\def\@@booktitle[#1]#2{\gdef\@bookshorttitle{#1}\gdef\@booktitle{#2}}
% \end{macrocode}
% \end{macro}
+% \begin{macro}{\booksubtitle}
+\newcommand{\booksubtitle}[1]{\gdef\@booksubtitle{#1}}
+% \end{macro}
% \begin{macro}{\editor}
% \begin{macrocode}
\newcommand*{\@editor}{}
@@ -1345,12 +1378,14 @@
% \begin{macrocode}
\fancypagestyle{plain}{%
\fancyhead{} % Löscht alle Kopfzeileneinstellungen
- \fancyhead[RO]{\small\@editor~(Hrsg.):\ \@booktitle,\hspace{1sp}\null\linebreak%
+ \fancyhead[RO]{\small\@editor~(Hrsg.):\ \@bookshorttitle,\hspace{1sp}\null\linebreak%
Lecture Notes in Informatics (LNI), Gesellschaft für Informatik, Bonn~\@year%
\hspace{5pt}\thepage\hspace{0.05cm}}
- \fancyhead[LE]{\small\@editor~(Hrsg.):\ \@booktitle,\linebreak\hspace{0.05cm}\thepage\hspace{5pt} Lecture Notes in Informatics (LNI), Gesellschaft für Informatik, Bonn~\@year}
+ \fancyhead[LE]{\small\@editor~(Hrsg.):\
+ \@bookshorttitle,\linebreak\hspace{0.05cm}\thepage\hspace{5pt} Lecture Notes
+ in Informatics (LNI), Gesellschaft für Informatik, Bonn~\@year}
\fancyfoot{} % Löscht alle Fußzeileneinstellungen
- \renewcommand{\headrulewidth}{0.4pt} %Linie unter Kopfzeile
+ \renewcommand{\headrulewidth}{0.4pt} %Linie unter Kopfzeile
}%
\ifnorunningheads
\pagestyle{empty}
@@ -1360,7 +1395,7 @@
\fancyhead[RO]{\small\@shorttitle\hspace{5pt}\thepage\hspace{0.05cm}}
\fancyhead[LE]{\hspace{0.05cm}\small\thepage\hspace{5pt}\@shortauthor}
\fancyfoot{} % Löscht alle Fußzeileneinstellungen
- \renewcommand{\headrulewidth}{0.4pt} %Linie unter Kopfzeile
+ \renewcommand{\headrulewidth}{0.4pt} %Linie unter Kopfzeile
\fi%
% \end{macrocode}
% \begin{macrocode}
@@ -1376,12 +1411,14 @@
% \begin{macrocode}
\ifusehyperref
\AtEndPreamble{%
- \RequirePackage[pdfusetitle,bookmarks=false]{hyperref}
+ \RequirePackage[bookmarks=false]{hyperref}
\hypersetup{%
pdfdisplaydoctitle,%
colorlinks=true,%
allcolors=black,%
- pdfstartview=Fit%
+ pdfstartview=Fit,%
+ pdfauthor={\@author},%
+ pdftitle={\@title}%
}%
}%
\fi%
@@ -1407,7 +1444,11 @@
% \end{macrocode}
% enables correct jumping to figures when referencing
% \begin{macrocode}
-\AtEndPreamble{\RequirePackage[all]{hypcap}}
+\AtEndPreamble{%
+ \@ifpackageloaded{hyperref}
+ {\RequirePackage[all]{hypcap}}%
+ {}%
+}%
% \end{macrocode}
% \begin{macrocode}
\def\and{\unskip\hspace{-0.42em},\hspace{.6em}}
@@ -1459,7 +1500,7 @@
\endlist\egroup}
% \end{macrocode}
% \begin{macrocode}
-\frenchspacing
+\frenchspacing
\tolerance 1414
\hbadness 1414
\emergencystretch 1.5em
@@ -1666,7 +1707,7 @@
s num.names$ 'numnames :=
numnames 'namesleft :=
{ namesleft #0 > }
- { s nameptr "{vv~}{ll}{, jj}{, ff}" format.name$ 't
+ { s nameptr "{vv~}{ll}{, jj}{, ff}" format.name$ 't
% last name, prename(s)
:=
nameptr #1 >
@@ -1688,7 +1729,7 @@
if$
t "others" =
{ " et~al." * }
-% ``and'' changed to ``;''
+% ``and'' changed to ``;''
{ "; " * t * }
if$
}
@@ -1700,7 +1741,7 @@
namesleft #1 - 'namesleft :=
}
while$
-
+
}
FUNCTION {format.authors}
@@ -1726,7 +1767,7 @@
{ ", Hrsg." * }
{ ", Hrsg." * }
%</ger>
-%<*eng|ger>
+%<*eng|ger>
if$
}
if$
@@ -1735,7 +1776,7 @@
FUNCTION {format.title}
{ title empty$
{ "" }
-% (RT) the title as typed in the database here
+% (RT) the title as typed in the database here
% { title "t" change.case$ }
'title
if$
@@ -1809,20 +1850,20 @@
%<*eng>
{ "volume" volume tie.or.space.connect
%</eng>
-%<*ger>
+%<*ger>
{ "Jgg." volume tie.or.space.connect
%</ger>
-%<*eng|ger>
+%<*eng|ger>
series empty$
'skip$
%</eng|ger>
-%<*eng>
- { " of " * series % no emphasize
+%<*eng>
+ { " of " * series % no emphasize
%</eng>
%<*ger>
- { " in " * series % no emphasize
+ { " in " * series % no emphasize
%</ger>
-%<*eng|ger>
+%<*eng|ger>
* }
if$
"volume and number" number either.or.check
@@ -1841,7 +1882,7 @@
series empty$
{ "" }
{ series * }
- if$
+ if$
number tie.or.space.connect % series and then the number, eg LNI 001
}
if$
@@ -1855,7 +1896,7 @@
{ "" }
{ output.state mid.sentence =
%</eng|ger>
-%<*eng>
+%<*eng>
{ edition "l" change.case$ " edition" * }
{ edition "t" change.case$ " edition" * }
%</eng>
@@ -1863,7 +1904,7 @@
{ edition "l" change.case$ ".~Auflage" * }
{ edition "t" change.case$ ".~Auflage" * }
%</ger>
-%<*eng|ger>
+%<*eng|ger>
if$
}
if$
@@ -1906,7 +1947,7 @@
{ "S." pages n.dashify tie.or.space.connect }
{ "S." pages tie.or.space.connect }
%</ger>
-%<*eng|ger>
+%<*eng|ger>
if$
}
if$
@@ -1938,13 +1979,13 @@
'format.pages
{ type empty$
%</eng|ger>
-%<*eng>
+%<*eng>
{ "chapter" }
%</eng>
%<*ger>
{ "Kapitel" }
%</ger>
-%<*eng|ger>
+%<*eng|ger>
{ type "l" change.case$ }
if$
chapter tie.or.space.connect
@@ -1960,7 +2001,7 @@
{ booktitle empty$
{ "" }
{ editor empty$
-% no emphasize
+% no emphasize
% { "In: " booktitle emphasize * }
% { "In: " format.editors * ", " * booktitle emphasize * }
{ "In: " booktitle * }
@@ -1998,7 +2039,7 @@
%<*ger>
{ "Bericht" }
%</ger>
-%<*eng|ger>
+%<*eng|ger>
'type
if$
number empty$
@@ -2057,7 +2098,7 @@
" in " *
}
%</ger>
-%<*eng|ger>
+%<*eng|ger>
if$
editor empty$
editor field.or.null author field.or.null =
@@ -2105,12 +2146,12 @@
FUNCTION {article}
{ output.bibitem
- format.authors %"author" output.check %% No dot after authors
+ format.authors write$ %"author" output.check %% No dot after authors
new.block
format.title "title" output.check
new.block
crossref missing$
- { journal % no emphasize
+ { journal % no emphasize
"journal" output.check
format.vol.num.pages output
format.date "year" output.check
@@ -2128,7 +2169,7 @@
{ output.bibitem
author empty$
{ format.editors "author and editor" output.check }
- { format.authors %output.nonnull %%no dot after authors:
+ { format.authors write$ %output.nonnull %%no dot after authors:
crossref missing$
{ "author and editor" editor either.or.check }
'skip$
@@ -2174,7 +2215,7 @@
{ output.bibitem
author empty$
{ format.editors "author and editor" output.check }
- { format.authors %*output.nonnull %%no dot after authors:
+ { format.authors write$ %*output.nonnull %%no dot after authors:
crossref missing$
{ "author and editor" editor either.or.check }
'skip$
@@ -2185,7 +2226,7 @@
format.btitle "title" output.check
new.block
crossref missing$ %changed whole order of next lines
- {
+ {
format.in.ed.booktitle "booktitle" output.check %added: mention title of the related book and editors
format.bvolume output
new.block
@@ -2209,7 +2250,7 @@
FUNCTION {incollection}
{ output.bibitem
- format.authors %"author" output.check %%no dot after authors:
+ format.authors write$ %"author" output.check %%no dot after authors:
new.block
format.title "title" output.check
new.block
@@ -2235,13 +2276,13 @@
FUNCTION {inproceedings}
{ output.bibitem
- format.authors %"author" output.check %%no dot after authors:
+ format.authors write$ %"author" output.check %%no dot after authors:
new.block
format.title "title" output.check
new.block
crossref missing$
{ format.in.ed.booktitle "booktitle" output.check
- new.block
+ new.block
format.bvolume output
format.number.series output
address empty$
@@ -2304,7 +2345,7 @@
FUNCTION {mastersthesis}
{ output.bibitem
- format.authors %"author" output.check
+ format.authors write$ %"author" output.check
new.block
format.title "title" output.check
new.block
@@ -2315,7 +2356,7 @@
%<*ger>
"Masterarbeit" format.thesis.type output.nonnull
%</ger>
-%<*eng|ger>
+%<*eng|ger>
school "school" output.check
address output
format.date "year" output.check
@@ -2354,7 +2395,7 @@
FUNCTION {phdthesis}
{ output.bibitem
- format.authors %"author" output.check
+ format.authors write$ %"author" output.check
new.block
format.btitle "title" output.check
new.block
@@ -2365,7 +2406,7 @@
%<*ger>
"Dissertation" format.thesis.type output.nonnull
%</ger>
-%<*eng|ger>
+%<*eng|ger>
school "school" output.check
address output
format.date "year" output.check
@@ -2411,7 +2452,7 @@
FUNCTION {techreport}
{ output.bibitem
- format.authors %"author" output.check
+ format.authors write$ %"author" output.check
new.block
format.title "title" output.check
new.block
@@ -2426,7 +2467,7 @@
FUNCTION {unpublished}
{ output.bibitem
- format.authors %"author" output.check
+ format.authors write$ %"author" output.check
new.block
format.title "title" output.check
new.block
@@ -2569,7 +2610,7 @@
""
{ namesleft #0 > }
{ nameptr numnames =
- { s nameptr "{ff }{vv }{ll}{ jj}" format.name$
+ { s nameptr "{ff }{vv }{ll}{ jj}" format.name$
"others" =
{ pop$ s #1 "{ll}" format.name$ #2 text.prefix$ %% second sign of first author if there are others
}
@@ -2582,7 +2623,7 @@
namesleft #1 - 'namesleft :=
}
while$
- numnames #3 >
+ numnames #3 >
{ pop$ s #1 "{ll}" format.name$ #2 text.prefix$ } % if more than 3 authors take second letter of first name
'skip$
if$
@@ -2859,7 +2900,7 @@
{ et.al.char.used
% to make it compatible with singlepass, we use \def
% { "\newcommand{\etalchar}[1]{$^{#1}$}" write$ newline$ }
- { "\gdef\etalchar#1{$^{#1}$}" write$ newline$ }
+ { "\gdef\etalchar#1{$^{#1}$}" write$ newline$ }
'skip$
if$
preamble$ empty$
@@ -2884,10 +2925,10 @@
%</eng|ger>
%</bibtex>
%<*template>
-%%% Um einen Artikel auf deutsch zu schreiben, genügt es die Klasse ohne
+%%% Um einen Artikel auf deutsch zu schreiben, genügt es die Klasse ohne
%%% Parameter zu laden.
\documentclass[]{lni}
-%%% To write an article in English, please use the option ``english'' in order
+%%% To write an article in English, please use the option ``english'' in order
%%% to get the correct hyphenation patterns and terms.
%%% \documentclass[english]{class}
%%
@@ -2895,15 +2936,15 @@
%%% Mehrere Autoren werden durch \and voneinander getrennt.
%%% Die Fußnote enthält die Adresse sowie eine E-Mail-Adresse.
%%% Das optionale Argument (sofern angegeben) wird für die Kopfzeile verwendet.
-\title[Ein Kurztitel]{Ein sehr langer Titel über mehrere Zeilen mit sehr vielen
+\title[Ein Kurztitel]{Ein sehr langer Titel über mehrere Zeilen mit sehr vielen
Worten und noch mehr Buchstaben}
%%%\subtitle{Untertitel / Subtitle} % if needed
\author[Vorname1 Nachname1 \and Firstname2 Lastname2]
-{Vorname1 Nachname1\footnote{Universität, Abteilung, Straße, Postleitzahl Ort,
+{Vorname1 Nachname1\footnote{Universität, Abteilung, Straße, Postleitzahl Ort,
Land \email{emailaddress at author1}} \and
-Firstname2 Lastname2\footnote{University, Department, Address, Country
+Firstname2 Lastname2\footnote{University, Department, Address, Country
\email{emailaddress at author2}}}
-\startpage{11} % Beginn der Seitenzählung für diesen Beitrag / Start page
+\startpage{11} % Beginn der Seitenzählung für diesen Beitrag / Start page
%numbering at this number
\editor{Herausgeber et al.} % Names of Editors
\booktitle{Name-der-Konferenz} % Name of book title
@@ -2912,7 +2953,7 @@
\maketitle
\begin{abstract}
-This is a brief overview of the paper, which should be 70 to 150 words long and
+This is a brief overview of the paper, which should be 70 to 150 words long and
include the most relevant points. This has to be a single paragraph.
\end{abstract}
\begin{keywords}
@@ -3066,7 +3107,7 @@
Vorname2 Nachname2\footnote{University, Department, Address, Country \email{emailaddress at author2}}}
\startpage{11} % Beginn der Seitenzählung für diesen Beitrag
\editor{Herausgeber et al.} % Namen der Herausgeber
-\booktitle{Name-der-Konferenz} % Name des Tagungsband
+\booktitle{Name-der-Konferenz} % Name des Tagungsband; optional Kurztitel
\year{2017}
%%%\lnidoi{18.18420/provided-by-editor-02} % Falls bekannt
\maketitle
@@ -3172,16 +3213,17 @@
\subsection{Formeln und Gleichungen}
-Die korrekte Einrückung und Nummerierung für Formeln ist bei den Umgebungen \texttt{equation} und \texttt{eqnarray} gewährleistet.
+Die korrekte Einrückung und Nummerierung für Formeln ist bei den Umgebungen
+\texttt{equation} und \texttt{align} gewährleistet.
\begin{equation}
1=4-3
\end{equation}
und
-\begin{eqnarray}
- 2=7-5\\
- 3=2-1
-\end{eqnarray}
+\begin{align}
+ 2&=7-5\\
+ 3&=2-1
+\end{align}
%% \bibliography{lni-paper-example-de.tex} ist hier nicht erlaubt: biblatex erwartet dies bei der Preambel
%% Starten Sie "biber paper", um eine Biliographie zu erzeugen.
@@ -3190,4 +3232,4 @@
\end{document}
%</exampledetex>
% \end{macrocode}
-%\fi
+%\fi
Modified: trunk/Master/texmf-dist/source/latex/lni/lni.ins
===================================================================
--- trunk/Master/texmf-dist/source/latex/lni/lni.ins 2019-10-14 20:46:45 UTC (rev 52383)
+++ trunk/Master/texmf-dist/source/latex/lni/lni.ins 2019-10-14 20:50:13 UTC (rev 52384)
@@ -62,7 +62,7 @@
\postamble
-Copyright (C) 2016-2019 by Gesellschaft für Informatik e.V. (GI)
+Copyright (C) 2016-2019 by Gesellschaft f^^c3^^bcr Informatik e.V. (GI)
This work may be distributed and/or modified under the
conditions of the LaTeX Project Public License (LPPL), either
@@ -102,7 +102,7 @@
}
\endbatchfile
%%
-%% Copyright (C) 2016-2019 by Gesellschaft für Informatik e.V. (GI)
+%% Copyright (C) 2016-2019 by Gesellschaft f^^c3^^bcr Informatik e.V. (GI)
%%
%% This work may be distributed and/or modified under the
%% conditions of the LaTeX Project Public License (LPPL), either
Modified: trunk/Master/texmf-dist/tex/latex/lni/lni.cls
===================================================================
--- trunk/Master/texmf-dist/tex/latex/lni/lni.cls 2019-10-14 20:46:45 UTC (rev 52383)
+++ trunk/Master/texmf-dist/tex/latex/lni/lni.cls 2019-10-14 20:50:13 UTC (rev 52384)
@@ -14,7 +14,7 @@
%% --------| -----------------------------------------------------------------
\NeedsTeXFormat{LaTeX2e}[1999/12/01]
\ProvidesClass{lni}
- [2019/04/04 v1.5 Official class for submissions to the ``Lecture Notes
+ [2019/10/14 v1.6BETA Official class for submissions to the ``Lecture Notes
in Informatics'']
\def\@clearglobaloption#1{%
\def\@tempa{#1}%
@@ -58,7 +58,7 @@
\newif\ifnorunningheads
\DeclareOption{norunningheads}{\norunningheadstrue}
\ExecuteOptions{utf8}
-\DeclareOption*{\ClassWarning{Option `\CurrentOption` is not supported!}}
+\DeclareOption*{\PassOptionsToClass{\CurrentOption}{article}}
\ProcessOptions\relax
\RequirePackage{iftex}
\ifPDFTeX
@@ -150,6 +150,13 @@
\RequirePackage[%
final,%
protrusion=alltext-nott]{microtype}%
+ \ifluatex
+ \iflnienglish
+ \RequirePackage[english]{selnolig}%
+ \else
+ \RequirePackage[ngerman]{selnolig}%
+ \fi%
+ \fi%
\fi%
\SetTracking{encoding=*,shape=sc}{50}%
\DeclareFontFamily{U}{MnSymbolC}{}
@@ -175,7 +182,8 @@
includehead,
headheight=20.39pt,
headsep=.31cm,
- centering]
+ centering,
+ driver=none]
{geometry}
\RequirePackage[a4,center,cam,info]{crop}
\renewcommand*\CROP@@info{{%
@@ -296,13 +304,13 @@
\def\and{\unskip,\ }#1}}\gdef\@author{#2}}
\newcommand{\authorrunning}[1]{%
\fancyhead[LE]{\hspace{0.05cm}\oldsmall\thepage\hspace{5pt}#1}}
-\newcommand*{\email}[1]{{\urlstyle{same}\protect\url{#1}}}
+\newcommand*{\email}[1]{\href{mailto:#1}{\urlstyle{same}\protect\nolinkurl{#1}}}
\newcommand{\@lnidoi}{}
\newcommand{\lnidoi}[1]{\gdef\@lnidoi{#1}}
\renewcommand\maketitle{\par%
\begingroup
\renewcommand\thefootnote{\@arabic\c at footnote}%
- \def\@makefnmark% keine Einrückung der Fußnoten eingestellt
+ \def\@makefnmark% keine Einr^^c3^^bcckung der Fu^^c3^^9fnoten eingestellt
{\@textsuperscript{\normalfont\@thefnmark}}%
\long\def\@makefntext##1{%
\@setpar{\@@par
@@ -346,7 +354,7 @@
\null
\begin{center}%
\vskip -24pt% Abstand vor dem Titel
- \raggedright% Linksbündig
+ \raggedright% Linksb^^c3^^bcndig
\let\footnote\thanks
{\Large\bfseries\@title\par}%
\ifx\@subtitle\empty\else
@@ -416,8 +424,8 @@
}%
\setcounter{topnumber}{10}% maximale Anzahl gleitender Objekte am Seitenanfang
\setcounter{bottomnumber}{10}% maximale Anzahl gleitender Objekte am Seitenende
-\renewcommand{\topfraction}{1.0}% Anteil den gleitende Objekte am Seitenanfang einnehmen dürfen
-\renewcommand{\bottomfraction}{1.0}% Anteil den gleitende Objekte am Seitenende einnehmen dürfen
+\renewcommand{\topfraction}{1.0}% Anteil den gleitende Objekte am Seitenanfang einnehmen d^^c3^^bcrfen
+\renewcommand{\bottomfraction}{1.0}% Anteil den gleitende Objekte am Seitenende einnehmen d^^c3^^bcrfen
\def\fps at table{htbp}
\def\fnum at table{\tablename~\thetable}
\renewcommand{\arraystretch}{1.1}
@@ -432,7 +440,7 @@
\fnindent0.18cm
\long\def\@makefntext#1{%
\parindent \fnindent%
- \leftskip \fnindent% Einrückung vor der footnotemark
+ \leftskip \fnindent% Einr^^c3^^bcckung vor der footnotemark
\noindent
\llap{\hb at xt@0.10cm{\hss\@makefnmark\ }}\ignorespaces#1}
\setlength{\parindent}{0pt}
@@ -440,7 +448,7 @@
\renewcommand{\labelitemi}{$\bullet$}
\renewcommand*\itemize{%
\ifnum \@itemdepth >\thr@@\@toodeep\else
- \setlength{\labelsep}{0.70cm}%Abstand zum Aufzählungspunkt
+ \setlength{\labelsep}{0.70cm}%Abstand zum Aufz^^c3^^a4hlungspunkt
\advance\@itemdepth\@ne
\edef\@itemitem{labelitem\romannumeral\the\@itemdepth}%
\expandafter
@@ -455,7 +463,7 @@
\ifnum \@enumdepth >\thr@@
\@toodeep
\else
-\setlength{\labelsep}{0.70cm}%Abstand zur Aufzählungsnummer
+\setlength{\labelsep}{0.70cm}%Abstand zur Aufz^^c3^^a4hlungsnummer
\advance\@enumdepth \@ne
\edef\@enumctr{enum\romannumeral\the\@enumdepth}%
\fi
@@ -464,7 +472,7 @@
\expandafter\list\csname label\@enumctr\endcsname{%
\usecounter{\@enumctr}%
\def\makelabel##1{\hss\llap{##1}}
-\setlength{\labelsep}{0.6cm} %Einrückung des Aufzählungszeichens
+\setlength{\labelsep}{0.6cm} %Einr^^c3^^bcckung des Aufz^^c3^^a4hlungszeichens
\setlength{\itemsep}{8pt}%
\setlength{\parsep}{-2pt}}
}%
@@ -484,8 +492,9 @@
\renewcommand{\refname}{Bibliography}%
}%
\newcommand*{\startpage}[1]{\setcounter{page}{#1}}
-\newcommand*{\@booktitle}{}
-\newcommand*{\booktitle}[1]{\renewcommand{\@booktitle}{#1}}
+\newcommand{\booktitle}{\@dblarg\@@booktitle}
+\def\@@booktitle[#1]#2{\gdef\@bookshorttitle{#1}\gdef\@booktitle{#2}}
+\newcommand{\booksubtitle}[1]{\gdef\@booksubtitle{#1}}
\newcommand*{\@editor}{}
\newcommand*{\editor}[1]{\renewcommand{\@editor}{#1}}
\AtBeginDocument{%
@@ -496,12 +505,14 @@
}%
}%
\fancypagestyle{plain}{%
- \fancyhead{} % Löscht alle Kopfzeileneinstellungen
- \fancyhead[RO]{\small\@editor~(Hrsg.):\ \@booktitle,\hspace{1sp}\null\linebreak%
- Lecture Notes in Informatics (LNI), Gesellschaft für Informatik, Bonn~\@year%
+ \fancyhead{} % L^^c3^^b6scht alle Kopfzeileneinstellungen
+ \fancyhead[RO]{\small\@editor~(Hrsg.):\ \@bookshorttitle,\hspace{1sp}\null\linebreak%
+ Lecture Notes in Informatics (LNI), Gesellschaft f^^c3^^bcr Informatik, Bonn~\@year%
\hspace{5pt}\thepage\hspace{0.05cm}}
- \fancyhead[LE]{\small\@editor~(Hrsg.):\ \@booktitle,\linebreak\hspace{0.05cm}\thepage\hspace{5pt} Lecture Notes in Informatics (LNI), Gesellschaft für Informatik, Bonn~\@year}
- \fancyfoot{} % Löscht alle Fußzeileneinstellungen
+ \fancyhead[LE]{\small\@editor~(Hrsg.):\
+ \@bookshorttitle,\linebreak\hspace{0.05cm}\thepage\hspace{5pt} Lecture Notes
+ in Informatics (LNI), Gesellschaft f^^c3^^bcr Informatik, Bonn~\@year}
+ \fancyfoot{} % L^^c3^^b6scht alle Fu^^c3^^9fzeileneinstellungen
\renewcommand{\headrulewidth}{0.4pt} %Linie unter Kopfzeile
}%
\ifnorunningheads
@@ -508,10 +519,10 @@
\pagestyle{empty}
\else
\pagestyle{fancy}
- \fancyhead{} % Löscht alle Kopfzeileneinstellungen
+ \fancyhead{} % L^^c3^^b6scht alle Kopfzeileneinstellungen
\fancyhead[RO]{\small\@shorttitle\hspace{5pt}\thepage\hspace{0.05cm}}
\fancyhead[LE]{\hspace{0.05cm}\small\thepage\hspace{5pt}\@shortauthor}
- \fancyfoot{} % Löscht alle Fußzeileneinstellungen
+ \fancyfoot{} % L^^c3^^b6scht alle Fu^^c3^^9fzeileneinstellungen
\renewcommand{\headrulewidth}{0.4pt} %Linie unter Kopfzeile
\fi%
\RequirePackage{url}
@@ -519,12 +530,14 @@
\RequirePackage{xspace}
\ifusehyperref
\AtEndPreamble{%
- \RequirePackage[pdfusetitle,bookmarks=false]{hyperref}
+ \RequirePackage[bookmarks=false]{hyperref}
\hypersetup{%
pdfdisplaydoctitle,%
colorlinks=true,%
allcolors=black,%
- pdfstartview=Fit%
+ pdfstartview=Fit,%
+ pdfauthor={\@author},%
+ pdftitle={\@title}%
}%
}%
\fi%
@@ -545,7 +558,11 @@
\Crefname{table}{\tablename}{\tablename}
}%
\fi%
-\AtEndPreamble{\RequirePackage[all]{hypcap}}
+\AtEndPreamble{%
+ \@ifpackageloaded{hyperref}
+ {\RequirePackage[all]{hypcap}}%
+ {}%
+}%
\def\and{\unskip\hspace{-0.42em},\hspace{.6em}}
\ifusebiblatex
\else
@@ -601,7 +618,7 @@
\vfuzz \hfuzz
\raggedbottom
%%
-%% Copyright (C) 2016-2019 by Gesellschaft für Informatik e.V. (GI)
+%% Copyright (C) 2016-2019 by Gesellschaft f^^c3^^bcr Informatik e.V. (GI)
%%
%% This work may be distributed and/or modified under the
%% conditions of the LaTeX Project Public License (LPPL), either
Modified: trunk/Master/tlpkg/libexec/ctan2tds
===================================================================
--- trunk/Master/tlpkg/libexec/ctan2tds 2019-10-14 20:46:45 UTC (rev 52383)
+++ trunk/Master/tlpkg/libexec/ctan2tds 2019-10-14 20:50:13 UTC (rev 52384)
@@ -2707,6 +2707,7 @@
'lcd' => 'latex -translate-file=empty.tcx', # no 8-bit
'listings' => 'latex', # requires interaction
'lmake' => 'latex', # requires interaction
+ 'lni' => 'tex',
'luaindex' => 'lualatex --shell-escape',
'luatexja' => 'lualatex',
'mandi' => 'pdflatex-preserve-pdf',
More information about the tex-live-commits
mailing list