texlive[51872] Master/texmf-dist: scontents (13aug19)
commits+karl at tug.org
commits+karl at tug.org
Tue Aug 13 22:54:27 CEST 2019
Revision: 51872
http://tug.org/svn/texlive?view=revision&revision=51872
Author: karl
Date: 2019-08-13 22:54:26 +0200 (Tue, 13 Aug 2019)
Log Message:
-----------
scontents (13aug19)
Modified Paths:
--------------
trunk/Master/texmf-dist/doc/latex/scontents/README.md
trunk/Master/texmf-dist/doc/latex/scontents/scontents.pdf
trunk/Master/texmf-dist/source/latex/scontents/scontents.dtx
trunk/Master/texmf-dist/tex/latex/scontents/scontents.sty
Modified: trunk/Master/texmf-dist/doc/latex/scontents/README.md
===================================================================
--- trunk/Master/texmf-dist/doc/latex/scontents/README.md 2019-08-13 20:54:10 UTC (rev 51871)
+++ trunk/Master/texmf-dist/doc/latex/scontents/README.md 2019-08-13 20:54:26 UTC (rev 51872)
@@ -1,10 +1,10 @@
-# scontents — Store LaTeX content in Sequences (l3seq)
-- Version: 1.0
-- Date: 2019/07/30
-- Authors: Pablo González and Phelype Oleinik
+## scontents — Stores LaTeX contents in memory or files
+- Version: 1.1
+- Date: 2019/08/12
+- Author: Pablo González
## Description
-The `scontents` package stores valid `LaTeX` code in sequences using the
+The `scontents` package stores valid `LaTeX` code in memory (sequences) using the
`l3seq` module of `expl3`. The stored content (including verbatim) can be
used as many times as desired in the document, additionally can be written
to external files if desired.
@@ -15,6 +15,12 @@
- [l3keys2e](https://ctan.org/pkg/l3keys2e)
- [xparse](https://ctan.org/pkg/xparse)
+## Installation
+
+The package `scontents` is present in `TeXLive` and `MiKTeX`, use the
+package manager to install. For a manual installation, put `scontents.dtx`
+in your working directory and run `tex scontents.dtx`.
+
## License
The scontents package may be modified and distributed under the terms and
conditions of the [LaTeX Project Public License](https://www.latex-project.org/lppl/), version 1.3c or greater.
@@ -21,6 +27,5 @@
## Contents
- README.md (this file)
-- scontents.sty (the sty)
- scontents.pdf (documentation)
- scontents.dtx (master file that produced all files)
Modified: trunk/Master/texmf-dist/doc/latex/scontents/scontents.pdf
===================================================================
(Binary files differ)
Modified: trunk/Master/texmf-dist/source/latex/scontents/scontents.dtx
===================================================================
--- trunk/Master/texmf-dist/source/latex/scontents/scontents.dtx 2019-08-13 20:54:10 UTC (rev 51871)
+++ trunk/Master/texmf-dist/source/latex/scontents/scontents.dtx 2019-08-13 20:54:26 UTC (rev 51872)
@@ -1,37 +1,5 @@
% \iffalse meta-comment
%<*internal>
-\iffalse
-%</internal>
-%<*readme>
-# scontents — Store LaTeX content in Sequences (l3seq)
-- Version: 1.0
-- Date: 2019/07/30
-- Authors: Pablo González and Phelype Oleinik
-
-## Description
-The `scontents` package stores valid `LaTeX` code in sequences using the
-`l3seq` module of `expl3`. The stored content (including verbatim) can be
-used as many times as desired in the document, additionally can be written
-to external files if desired.
-
-## Requirements
-The package requires the following packages:
-- [filecontentsdef](https://ctan.org/pkg/filecontentsdef)
-- [l3keys2e](https://ctan.org/pkg/l3keys2e)
-- [xparse](https://ctan.org/pkg/xparse)
-
-## License
-The scontents package may be modified and distributed under the terms and
-conditions of the [LaTeX Project Public License](https://www.latex-project.org/lppl/), version 1.3c or greater.
-
-## Contents
-- README.md (this file)
-- scontents.sty (the sty)
-- scontents.pdf (documentation)
-- scontents.dtx (master file that produced all files)
-%</readme>
-%<*internal>
-\fi
\def\nameofplainTeX{plain}
\ifx\fmtname\nameofplainTeX\else
\expandafter\begingroup
@@ -53,11 +21,7 @@
\generate{
\file{\jobname.ins}{\from{\jobname.dtx}{install}}
}
-\nopreamble\nopostamble
-\usedir{doc/latex/scontents}
-\generate{
- \file{README.md}{\from{\jobname.dtx}{readme}}
-}
+
\ifx\fmtname\nameofplainTeX
\expandafter\endbatchfile
\else
@@ -67,35 +31,11 @@
%<*driver>
\documentclass[full]{l3doc}
\usepackage[top=0.5in,bottom=0.5in,left=2.0in,right=1in,footskip=0.2in,headsep=10pt]{geometry}
+\usepackage[osf,mono=false,scale=0.95,llscaled=0.95]{libertine}
\usepackage{unicode-math}
-\setmathfont[Scale = 0.95]{Latin Modern Math}
-\setmainfont[
- Numbers = OldStyle,
- Ligatures = TeX,
- Scale = 0.95,
- UprightFont = *-Regular,
- ItalicFont = *-Italic,
- BoldFont = *-Bold,
- BoldItalicFont = *-BoldItalic,
- SmallCapsFeatures = {Letters=SmallCaps},
- Extension =.otf]{LibertinusSerif}
-\setsansfont[
- Numbers = OldStyle,
- Ligatures = TeX,
- Scale = 0.95,
- UprightFont = *-Regular,
- ItalicFont = *-Italic,
- BoldFont = *-Bold,
- SmallCapsFeatures = {Letters=SmallCaps},
- Extension = .otf]{LibertinusSans}
-\setmonofont[
- Scale = 0.80,
- Extension = .otf,
- UprightFont = *-Regular ,
- ItalicFont = *-RegularIt,
- BoldFont = *-Medium ,
- BoldItalicFont = *-MediumIt
- ]{SourceCodePro}
+\setmathfont[Scale = 0.95]{latinmodern-math.otf}
+\usepackage[osf,scale=0.80,semibold]{sourcecodepro}
+\usepackage{fontawesome5}
\newfontfamily\lmmitalic{lmmono10-italic.otf}[
Scale = 0.95,%
Extension = .otf,%
@@ -108,7 +48,6 @@
RawFeature = {+latn,+rand,+kern,+size},%
]
\usepackage[svgnames]{xcolor}
-\usepackage{fontawesome5}
\usepackage[sf,bf,compact,medium,pagestyles]{titlesec}
\usepackage{hyperxmp,lastpage,imakeidx,microtype,attachfile2}
\usepackage{adjustbox,multicol,listings,accsupp,titletoc}
@@ -140,102 +79,102 @@
\expandafter\DoNotIndex\expandafter{\string\}}
\expandafter\DoNotIndex\expandafter{\string\begin}
\newcommand{\HP}[1]{\emph{\hyperpage{#1}}\normalsize}
-\def\MYSortIndex#1#2{\index[mydoc]{#1\actualchar#2|HP}}
+\def\MYSortIndex#1#2{\index[userdoc]{#1\actualchar#2|HP}}
\indexsetup{level=\section,firstpagestyle=myheader}
-\makeindex[name=mydoc,options=-s gind.ist,columnsep=15pt,title={Index of Documentation}]
+\makeindex[name=userdoc,options=-s gind.ist,columnsep=15pt,title={Index of Documentation}]
\makeindex[options=-s gind.ist,columnsep=15pt,title={Index of Implementation}]
\setlength{\parindent}{0pt}
-%%-------------------- ONLY FOR DOCUMENTATION ------------------------%%
-% Colors for options
+%^^A------------------- ONLY FOR DOCUMENTATION ------------------------%%
+%^^A Colors for options
\definecolor{optcolor}{rgb}{0.281,0.275,0.485}
\definecolor{mypkgcolor}{RGB}{0,128,128}%
-% Custom \mymeta[...]{...}, \mymarg[...]{...} and \myoarg[...]{...} for color
+%^^A Custom \meta[...]{...}, \marg[...]{...} and \oarg[...]{...} with color
\ExplSyntaxOn
%^^A user level commands
\NewDocumentCommand{\mymeta}{O{}m}
{
- \mydoc_mymeta_generic:Nnn \mydoc_mymeta:n { #1 } { #2 }
+ \userdoc_meta_generic:Nnn \userdoc_meta:n { #1 } { #2 }
}
\NewDocumentCommand{\mymarg}{O{}m}
{
- \mydoc_mymeta_generic:Nnn \mydoc_mymarg:n { #1 } { #2 }
+ \userdoc_meta_generic:Nnn \userdoc_marg:n { #1 } { #2 }
}
\NewDocumentCommand{\myoarg}{O{}m}
{
- \mydoc_mymeta_generic:Nnn \mydoc_myoarg:n { #1 } { #2 }
+ \userdoc_meta_generic:Nnn \userdoc_oarg:n { #1 } { #2 }
}
%^^A variables and keys
-\tl_new:N \l_mydoc_mymeta_font_tl
+\tl_new:N \l_userdoc_meta_font_tl
-\keys_define:nn { mydoc / mymeta }
+\keys_define:nn { userdoc / mymeta }
{
type .choice:,
- type / tt .code:n = \tl_set:Nn \l_mydoc_mymeta_font_tl { \ttfamily },
- type / rm .code:n = \tl_set:Nn \l_mydoc_mymeta_font_tl { \rmfamily },
+ type / tt .code:n = \tl_set:Nn \l_userdoc_meta_font_tl { \ttfamily },
+ type / rm .code:n = \tl_set:Nn \l_userdoc_meta_font_tl { \rmfamily },
type .initial:n = tt,
- cf .tl_set:N = \l_mydoc_mymeta_color_tl,
+ cf .tl_set:N = \l_userdoc_meta_color_tl,
cf .initial:n = black,
- ac .tl_set:N = \l_mydoc_mymeta_anglecolor_tl,
+ ac .tl_set:N = \l_userdoc_meta_anglecolor_tl,
ac .initial:n = black,
- sbc .tl_set:N = \l_mydoc_mymeta_brackcolor_tl,
+ sbc .tl_set:N = \l_userdoc_meta_brackcolor_tl,
sbc .initial:n = black,
- cbc .tl_set:N = \l_mydoc_mymeta_bracecolor_tl,
+ cbc .tl_set:N = \l_userdoc_meta_bracecolor_tl,
cbc .initial:n = black,
}
%^^A internal commands
-\cs_new_protected:Npn \mydoc_mymeta_generic:Nnn #1 #2 #3
+\cs_new_protected:Npn \userdoc_meta_generic:Nnn #1 #2 #3
{
\group_begin:
- \keys_set:nn { mydoc / mymeta } { #2 }
- \color{ \l_mydoc_mymeta_color_tl }
- \l_mydoc_mymeta_font_tl
- #1 { #3 } % #1 is \mydoc_mymeta:n, \mydoc_mymarg:n or \mydoc_myoarg:n
+ \keys_set:nn { userdoc / mymeta } { #2 }
+ \color{ \l_userdoc_meta_color_tl }
+ \l_userdoc_meta_font_tl
+ #1 { #3 } % #1 is \userdoc_meta:n, \userdoc_marg:n or \userdoc_oarg:n
\group_end:
}
-\cs_new_protected:Npn \mydoc_mymeta:n #1
+\cs_new_protected:Npn \userdoc_meta:n #1
{
- \mydoc_mymeta_angle:n { \textlangle }
- \mydoc_mymeta_mymeta:n { #1 }
- \mydoc_mymeta_angle:n { \textrangle }
+ \userdoc_meta_angle:n { \textlangle }
+ \userdoc_meta_meta:n { #1 }
+ \userdoc_meta_angle:n { \textrangle }
}
-\cs_new_protected:Npn \mydoc_mymarg:n #1
+\cs_new_protected:Npn \userdoc_marg:n #1
{
- \mydoc_mymeta_brace:n { \textbraceleft }
- \mydoc_mymeta:n { #1 }
- \mydoc_mymeta_brace:n { \textbraceright }
+ \userdoc_meta_brace:n { \textbraceleft }
+ \userdoc_meta:n { #1 }
+ \userdoc_meta_brace:n { \textbraceright }
}
-\cs_new_protected:Npn \mydoc_myoarg:n #1
+\cs_new_protected:Npn \userdoc_oarg:n #1
{
- \mydoc_mymeta_brack:n { [ }
- \mydoc_mymeta:n { #1 }
- \mydoc_mymeta_brack:n { ] }
+ \userdoc_meta_brack:n { [ }
+ \userdoc_meta:n { #1 }
+ \userdoc_meta_brack:n { ] }
}
-\cs_new_protected:Npn \mydoc_mymeta_mymeta:n #1
+\cs_new_protected:Npn \userdoc_meta_meta:n #1
{
\textnormal{\textit{#1}}
}
-\cs_new_protected:Npn \mydoc_mymeta_angle:n #1
+\cs_new_protected:Npn \userdoc_meta_angle:n #1
{
\group_begin:
\fontfamily{lmr}\selectfont
- \textcolor{\l_mydoc_mymeta_anglecolor_tl}{#1}
+ \textcolor{\l_userdoc_meta_anglecolor_tl}{#1}
\group_end:
}
-\cs_new_protected:Npn \mydoc_mymeta_brace:n #1
+\cs_new_protected:Npn \userdoc_meta_brace:n #1
{
\group_begin:
- \color{\l_mydoc_mymeta_bracecolor_tl}
+ \color{\l_userdoc_meta_bracecolor_tl}
#1
\group_end:
}
-\cs_new_protected:Npn \mydoc_mymeta_brack:n #1
+\cs_new_protected:Npn \userdoc_meta_brack:n #1
{
- \textcolor{\l_mydoc_mymeta_brackcolor_tl}{#1}
+ \textcolor{\l_userdoc_meta_brackcolor_tl}{#1}
}
-% \envexamp{m}
+%^^A \envexamp{m}
\newsavebox{\marginexa}
\NewDocumentCommand{\envexamp}{m}
{
@@ -253,7 +192,7 @@
\ignorespaces%
}
-% \cmdexamp{s m o m o}
+%^^A \cmdexamp{s m o m o}
\DeclareDocumentCommand{\cmdexamp}{s m o m o}
{
\group_begin:
@@ -273,7 +212,7 @@
\MYSortIndex{Commands}{Commands ~ provide ~ by ~ \textcolor{gray}{scontents}>\texttt{\textbackslash#2}}%
}
-% \keyexamp{mmm}
+%^^A \keyexamp{mmm}
\DeclareDocumentCommand{\keyexamp}{ m m m }
{
\par
@@ -285,7 +224,7 @@
\MYSortIndex{Keys}{Keys>\texttt{#1}}%
}
-% \mypkg{sm}
+%^^A \mypkg{sm}
\NewDocumentCommand{\mypkg}{sm}
{
\IfBooleanTF{#1}
@@ -299,7 +238,7 @@
}
}
-% \myenv{sm}
+%^^A \myenv{sm}
\DeclareDocumentCommand{\myenv}{sm}
{
\IfBooleanTF{#1}
@@ -313,7 +252,7 @@
}
}
-% \ics{sm}
+%^^A \ics{sm}
\DeclareDocumentCommand{\ics}{sm}
{
\IfBooleanTF{#1}
@@ -328,7 +267,7 @@
}
\ExplSyntaxOff
-% email https://tex.stackexchange.com/a/663
+%^^A email https://tex.stackexchange.com/a/663
\catcode`\_=11\relax%
\newcommand\email[1]{\_email #1\q_nil}%
\def\_email#1@#2\q_nil{%
@@ -339,7 +278,7 @@
\catcode`\_=8\relax%
\makeatletter
-% Logo whit textffmw font for title
+%^^A Logo whit fetamont font for title
\newsavebox{\logobox}
\savebox{\logobox}{%
\normalsize\fetamontotf{\textcolor{mypkgcolor}{s}\textcolor{OrangeRed}{content}\textcolor{mypkgcolor}{s}}}
@@ -349,10 +288,10 @@
}
\makeatother
-% don't copy numbers in code example
+%^^A Don't copy numbers in code example
\newcommand*{\noaccsupp}[1]{\BeginAccSupp{ActualText={}}#1\EndAccSupp{}}
-% Create a language for documentation
+%^^A Create a language for documentation
\lstdefinelanguage{scontents-doc}{
texcsstyle=*,%
escapechar=`,%
@@ -393,7 +332,7 @@
{=}{{\textcolor{red}{=}}}{1},%
}[keywords,tex,comments,strings]% end languaje
-% \begin{examplecode}[optlst]...\end{examplecode}
+%^^A \begin{examplecode}[key=val]...\end{examplecode}
\lstnewenvironment{examplecode}[1][]{%
\lstset{
language=scontents-doc,%
@@ -410,7 +349,7 @@
}% close lstset
}{}% close examplecode
-% \lstinline[style=inline]|...|
+%^^A \lstinline[style=inline]|...|
\lstdefinestyle{inline}
{
language=scontents-doc,%
@@ -422,13 +361,13 @@
literate=*{\%}{{\bfseries\textcolor{gray}{\%}}}{1}
}
-% set default style
+%^^A Set default style
\lstset{style=inline}
-% Get file info
+%^^A Get file info
\GetFileInfo{\jobname.sty}
-% Config hyperref
+%^^A Config hyperref
\hypersetup{
linkcolor = blue!50,
citecolor = red!50,%
@@ -436,16 +375,16 @@
colorlinks = true,%
linktoc = all,%
pdftitle = {.:: The scontents package --- \fileinfo{} ::.},%
- pdfauthor = {Pablo González L and Phelype Oleinik},
+ pdfauthor = {Pablo González L},
pdfsubject = {Documentation for \fileversion{} [\filedate] },%
- pdfcopyright = {\textcopyright 2019 by Pablo González and Phelype Oleinik},
+ pdfcopyright = {\textcopyright 2019 by Pablo González},
pdfcontacturl = {https://github.com/pablgonz/scontents},
pdfkeywords = {filecontents, filecontentsdef, xparse, expl3, l3seq, Store contents},
pdfstartview = {FitH},%
- bookmarksopenlevel = 2,%
+ bookmarksopenlevel = 1,%
}
-% Configuration titleps
+%^^A Configuration titleps and titlesec
\settitlemarks{section}
\renewpagestyle{plain}[\color{gray}\small\sffamily]{
\setfoot{}{}{\thepage/\pageref{LastPage}}}
@@ -452,7 +391,7 @@
\newpagestyle{myheader}[\color{gray}\small\sffamily]{
\renewcommand\makeheadrule{\color{gray}\rule[0.45\baselineskip]{\linewidth}{0.4pt}}
-\setfoot{\scalebox{0.8}{\mylogo}\space\textcopyright\space 2019 by Pablo González and Phelype Oleinik}
+\setfoot{\scalebox{0.8}{\mylogo}\space\textcopyright\space 2019 by Pablo González}
{}
{\thepage/\pageref{LastPage}}
\sethead{\raisebox{0.75\baselineskip}{Documentation for \fileversion\space[\filedate]}}
@@ -460,24 +399,18 @@
{\raisebox{0.75\baselineskip}{\scshape\small\S.\thesection\space\sectiontitle}}
}
-% add headheight
\setlength{\headheight}{21pt}%
-% Table of contents
\titlecontents{section}[0mm]{}%
- {\bfseries\contentspush{\makebox[4mm][l]{\thecontentslabel\hfill}}}%
- {\hspace*{-4mm}}% numberless
+ {\bfseries\contentspush{\makebox[5mm][l]{\thecontentslabel\hfill}}}%
+ {\hspace*{-5mm}}% numberless
{\hspace{0.25em}\titlerule*[6pt]{.}\contentspage}%
-\titlecontents{subsection}[4mm]{}%
+\titlecontents{subsection}[5mm]{}%
{\contentspush{\makebox[6mm][l]{\thecontentslabel\hfill}}}
- {\hspace*{-10mm}}% numberless
+ {\hspace*{-11mm}}% numberless
{\hspace{0.25em}\titlerule*[6pt]{.}\contentspage}%
-\titlecontents{subsubsection}[10mm]{}%
- {\contentspush{\makebox[8mm][l]{\thecontentslabel\hfill}}}
- {\hspace*{-18mm}}% numberless
- {\hspace{0.25em}\titlerule*[6pt]{.}\contentspage}%
-% Table of contents
+%^^A Table of contents
\makeatletter
\renewcommand\tableofcontents{%
\begingroup%
@@ -494,12 +427,6 @@
\endgroup
}
\makeatother
-
-\begingroup\expandafter\expandafter\expandafter\endgroup
-\expandafter\ifx\csname pdfxform\endcsname\relax
- \usepackage{luatex85} % For LuaTeX
-\fi
-
\begin{document}
\DocInput{\jobname.dtx}
\end{document}
@@ -507,16 +434,15 @@
% \fi
%
% \title{
-% \scalebox{1.1}{\mylogo}\\[2pt]
-% \large
-% \textsf{Store \hologo{LaTeX} contents in seq}\\[3pt]
+% \scalebox{1.025}{\mylogo}\\[2pt]
% \Large
+% \textsf{Stores \hologo{LaTeX} contents}\\[3pt]
% \fileversion{} --- \filedate\thanks{
% This file describes a documentation for \fileversion, last revised
% \filedate.}\\[25pt]
% \author{
% \large
-% \raisebox{-1pt}{\textcopyright}{}2019 by Pablo González and Phelype Oleinik
+% \raisebox{-1pt}{\textcopyright}{}2019 by Pablo González
% \thanks{E-mail: \textsf{\guillemotleft}\email{pablgonz at educarchile.cl}\textsf{\guillemotright}}%
% }
% \small
@@ -528,7 +454,7 @@
% \maketitle
%
% \begin{abstract}
-% The \mypkg*{scontents} package stores valid \hologo{LaTeX} code in sequences using
+% The \mypkg*{scontents} package stores valid \hologo{LaTeX} code in memory (sequences) using
% the \mypkg{l3seq} module of \mypkg{expl3}. The stored content (including
% \emph{verbatim}) can be used as many times as desired in the document,
% additionally can be written to external files if desired.
@@ -538,7 +464,7 @@
%
% \setlength{\parskip}{3pt}
%
-% \section[Description]{Description}
+% \section*{Description}
%
% The \mypkg*{scontents} package encapsulates the \mypkg{filecontentsdef}
% package of \textsc{Jean Fran\c{c}ois Burnol} which allows you to save the
@@ -546,7 +472,7 @@
% style \myoarg{key = val} along with the ability to save content in sequences
% for later use in different parts of the document.
%
-% \section{Motivation and Acknowledgments}
+% \section*{Motivation and Acknowledgments}
%
% In \hologo{LaTeX} there is no direct way to record content for later use, although
% you can do this using \verb|\macros|, recording \meta{verbatim content} is a
@@ -560,7 +486,8 @@
% This package would not be possible without the great work of \textsc{Jean
% Fran\c{c}ois Burnol} who was kind enough to take my requirements into account
% and add the \myenv{filecontentsdefmacro} environment. Also a special thanks to
-% all the \hologo{LaTeX3} team for their great work and to the different members
+% Phelype Oleinik who has collaborated and adapted a large part of the code and
+% all \hologo{LaTeX3} team for their great work and to the different members
% of the \href{https://tex.stackexchange.com}{TeX-SX} community who have provided
% great answers and ideas. Here a note of the main ones:
%
@@ -576,8 +503,8 @@
% \item \href{https://tex.stackexchange.com/q/373647/7832}{Collect contents of an environment (that contains verbatim content)}
% \end{enumerate}
%
-% \section[License and Requirements]{License and Requirements}
-% \label{sec:Licenseandreq}
+% \section*{License and Requirements}
+% \label{sec:licence}
%
% Permission is granted to copy, distribute and/or modify this software under
% the terms of the LaTeX Project Public License (lppl), version 1.3 or later
@@ -595,7 +522,7 @@
%
% \pagestyle{myheader}
%
-% \section{The scontents package}
+% \section{The \texttt{scontents} package}
%
% The \mypkg*{scontents} package provides the \myenv*{scontents} environment,
% \ics*{Scontents} and \ics*{Scontents*} command to stored contents and \ics*{getstored}
@@ -638,13 +565,7 @@
%
% The summary with all possible options can be found in \ref{sec:optover}.
%
-% \section{User interface}
-% \label{sec:userinterface}
-%
-% The user interface provided by the package provides an environment and several
-% commands with some limitations that must be taken into account.
-%
-% \subsection{The environment scontents}
+% \section{The environment \env{scontents}}
% \label{sec:envscontents}
%
% \envexamp{scontents}
@@ -668,7 +589,7 @@
% For more technical information about the environment it is better to read
% the documentation of the \mypkg{filecontentsdef} package.
%
-% \subsubsection*{Options for environment}
+% \subsection*{Options for environment}
%
% The environment options can be configured globally using option
% in package or the \ics*{setupsc} command and locally
@@ -698,7 +619,7 @@
% it will not store the contents of this one. It is analogous to the
% \myenv{filecontents*} environment.
%
-% \subsection{The command \cs{Scontents}}
+% \section{The command \cs{Scontents}}
% \label{sec:Scontents}
%
% \cmdexamp{Scontents}[key=val]{argument}
@@ -726,7 +647,7 @@
% \ics{relax} or \lstinline[style=inline]|%| at the end.
% \end{enumerate}
%
-% \subsubsection*{Options for command}
+% \subsection*{Options for command}
%
% The command options (including star version) can be configured globally
% using option in package or the \ics*{setupsc} command and locally
@@ -742,7 +663,7 @@
% \keyexamp{print-cmd}{true\textbar false}{false}
% It will show the current content of \ics*{Scontents}.
%
-% \subsection{The command \cs{getstored}}
+% \section{The command \cs{getstored}}
% \label{sec:getstored}
%
% \cmdexamp{getstored}[index]{seq name}
@@ -751,7 +672,7 @@
% and can be used as an \meta{argument} for another command. If the optional argument
% is not passed it defaults to the last element saved in the \meta{seq name}.
%
-% \subsection{The command \cs{typestored}}
+% \section{The command \cs{typestored}}
% \label{sec:typestored}
%
% \cmdexamp{typestored}[index]{seq name}
@@ -825,9 +746,9 @@
%</example>
% \fi
%
-% \subsection{Other commands provided}
+% \section{Other commands provided}
%
-% \subsubsection*{The command \cs{meaningsc}}
+% \subsection*{The command \cs{meaningsc}}
% \label{sec:meaningsc}
%
% \cmdexamp{meaningsc}[index]{seq name}
@@ -835,19 +756,19 @@
% in \meta{seq name}. If the optional argument is not passed it defaults to the
% last element saved in the \meta{seq name}.
%
-% \subsubsection*{The command \cs{countsc}}
+% \subsection*{The command \cs{countsc}}
% \label{sec:countsc}
%
% \cmdexamp{countsc}{seq name}
% The command \ics*{countsc} count a number of contents stored in \meta{seq name}.
%
-% \subsubsection*{The command \cs{cleansc}}
+% \subsection*{The command \cs{cleansc}}
% \label{sec:cleansc}
%
% \cmdexamp{cleansc}{seq name}
% The command \ics*{cleansc} remove all contents stored in \meta{seq name}.
%
-% \subsection{Options Overview}
+% \section{Options Overview}
% \label{sec:optover}
%
% \newcommand*{\xmark}{\textcolor{red}{✘}}%
@@ -1198,21 +1119,38 @@
%
% \section{Test \texttt{\textbackslash getstored}}
% \getstored[2]{contents}\par
-%
% \getstored[1]{contents}
%
% \section{Test \texttt{\textbackslash typestored}}
-%
% \typestored[1]{contents}
% \end{document}
% \end{VerbatimOut}
+%
% Customization of \myenv*{verbatimsc} using the \mypkg{minted} package
% \textattachfile[color=0 0 1]{scexamp8.ltx}{\faFile*[regular]}.
% \lstinputlisting[language=scontents-doc,numbers=left]{scexamp8.ltx}
%
+% \section{Change history}
+%
+% \label{sec:changes}
+%
+% \setlist[itemize,1]{label=\textendash, wide=0.5em, nosep, noitemsep, leftmargin=10pt}
+% \newlength\descrwidth
+% \settowidth{\descrwidth}{\textsf{v1.0, (ctan), 2019/07/30} }
+% \begin{description}[font=\small\sffamily, wide=0pt, style=multiline, leftmargin=\descrwidth, nosep, noitemsep]
+% \item [\fileversion{} (ctan), \filedate]
+% \begin{itemize}
+% \item Extension of documentation.
+% \item Replace \verb+\tex_endinput:D+ by \verb+\file_input_stop:+.
+% \end{itemize}
+% \item [v1.0 (ctan), 2019/07/30]
+% \begin{itemize}
+% \item First public release,
+% \end{itemize}
+% \end{description}
% \newpage
%
-% \printindex[mydoc]
+% \printindex[userdoc]
% \newpage
% \StopEventually{^^A
% \newgeometry{top=0.5in,bottom=0.5in,left=1.0in,right=1in,footskip=0.2in,headsep=10pt}
@@ -1222,9 +1160,86 @@
% \printindex
% }
%
-% \section{Implementation}
+% \section{scontents implementation}
% \label{sec:Implementation}
% \addtocontents{toc}{\protect\setcounter{tocdepth}{0}}
+%
+% \begin{documentation}
+% \subsection{User interface}
+%
+% The \emph{user interface} provided by this package consists of a couple of environments
+% and a series of commands described below.
+%
+% \begin{function}{\setupsc}
+% \begin{syntax}
+% \cs{setupsc} \Arg{key=val}
+% \end{syntax}
+% The command to set options for \cs{Scontents}, \cs{Scontents*} and the
+% environment \env{scontents}.
+% \end{function}
+%
+% \begin{function}{scontents}
+% \begin{syntax}
+% \oarg{key=val}
+% \end{syntax}
+% The environment encapsulating \env{filecontentsdef*} and
+% \env{filecontentsdefmacro} from \pkg{filecontentsdef} package.
+% \end{function}
+%
+% \begin{function}{\Scontents}
+% \begin{syntax}
+% \cs{Scontents}~ \oarg{key=val} \Arg{argument}
+% \cs{Scontents*} \oarg{key=val} \Arg{argument}
+% \cs{Scontents*} \oarg{key=val} \meta{del}\Arg{argument}\meta{del}
+% \end{syntax}
+% The command to store content directly in memory, the star version allows to save
+% \meta{verbatim} content.
+% \end{function}
+%
+% \begin{function}{\getstored}
+% \begin{syntax}
+% \cs{getstored}~\oarg{index} \Arg{seq name}
+% \end{syntax}
+% The command to receive content stored in memory.
+% \end{function}
+%
+% \begin{function}{\typestored}
+% \begin{syntax}
+% \cs{typestored}~\oarg{index} \Arg{seq name}
+% \cs{typestored*}\oarg{index} \Arg{seq name}
+% \end{syntax}
+% The command to display the content stored in memory within the \env{verbatimsc},
+% the starred version displays the content stored by \cs{Scontents*}.
+% \end{function}
+%
+% \begin{function}{verbatimsc}
+% Internal environment used by \cs{typestored} and \cs{typestored*} to display
+% \meta{verbatim style} content.
+% \end{function}
+%
+% \begin{function}{\countsc}
+% \begin{syntax}
+% \cs{countsc} \Arg{seq name}
+% \end{syntax}
+% The command to count the number of elements stored.
+% \end{function}
+%
+% \begin{function}{\meaningsc}
+% \begin{syntax}
+% \cs{meaningsc}~\oarg{index} \Arg{seq name}
+% \end{syntax}
+% The command to display the \cs{meaning} of the stored content.
+% \end{function}
+%
+% \begin{function}{\cleanseqsc}
+% \begin{syntax}
+% \cs{meaningsc} \Arg{seq name}
+% \end{syntax}
+% The command to erase the memory sequence at the point at which it is executed.
+% \end{function}
+%
+% \end{documentation}
+%
% \iffalse
%<*package>
% \fi
@@ -1241,9 +1256,9 @@
% \begin{macrocode}
\RequirePackage{filecontentsdef}[2019/04/20]
\RequirePackage{l3keys2e}
-\RequirePackage{xparse}[2019/05/03]
-\ProvidesExplPackage{scontents}{2019/07/30}{1.0}
- {Store LaTeX content in Sequences (l3seq)}
+\RequirePackage{xparse}[2019/05/28]
+\ProvidesExplPackage{scontents}{2019/08/12}{1.1}
+ {Stores LaTeX contents in memory or files}
% \end{macrocode}
% A check to make sure that \pkg{xparse} is not too old
% \begin{macrocode}
@@ -1256,7 +1271,7 @@
'l3kernel'~and~'l3packages'.\MessageBreak
Loading~scontents~will~abort!
}
- \tex_endinput:D
+ \file_input_stop:
}
% \end{macrocode}
%
Modified: trunk/Master/texmf-dist/tex/latex/scontents/scontents.sty
===================================================================
--- trunk/Master/texmf-dist/tex/latex/scontents/scontents.sty 2019-08-13 20:54:10 UTC (rev 51871)
+++ trunk/Master/texmf-dist/tex/latex/scontents/scontents.sty 2019-08-13 20:54:26 UTC (rev 51872)
@@ -1,8 +1,8 @@
\RequirePackage{filecontentsdef}[2019/04/20]
\RequirePackage{l3keys2e}
-\RequirePackage{xparse}[2019/05/03]
-\ProvidesExplPackage{scontents}{2019/07/30}{1.0}
- {Store LaTeX content in Sequences (l3seq)}
+\RequirePackage{xparse}[2019/05/28]
+\ProvidesExplPackage{scontents}{2019/08/12}{1.1}
+ {Stores LaTeX contents in memory or files}
\@ifpackagelater { xparse } { 2019/05/03 }
{ }
{
@@ -12,7 +12,7 @@
'l3kernel'~and~'l3packages'.\MessageBreak
Loading~scontents~will~abort!
}
- \tex_endinput:D
+ \file_input_stop:
}
\keys_define:nn { scontents }
{
More information about the tex-live-commits
mailing list