texlive[48314] Master: tikz-network (30jul18)
commits+karl at tug.org
commits+karl at tug.org
Mon Jul 30 23:13:38 CEST 2018
Revision: 48314
http://tug.org/svn/texlive?view=revision&revision=48314
Author: karl
Date: 2018-07-30 23:13:38 +0200 (Mon, 30 Jul 2018)
Log Message:
-----------
tikz-network (30jul18)
Modified Paths:
--------------
trunk/Master/tlpkg/bin/tlpkg-ctan-check
trunk/Master/tlpkg/tlpsrc/collection-pictures.tlpsrc
Added Paths:
-----------
trunk/Master/texmf-dist/doc/latex/tikz-network/
trunk/Master/texmf-dist/doc/latex/tikz-network/README.md
trunk/Master/texmf-dist/doc/latex/tikz-network/data/
trunk/Master/texmf-dist/doc/latex/tikz-network/data/edges.csv
trunk/Master/texmf-dist/doc/latex/tikz-network/data/front.pdf
trunk/Master/texmf-dist/doc/latex/tikz-network/data/ml_edges.csv
trunk/Master/texmf-dist/doc/latex/tikz-network/data/ml_edges_simple.csv
trunk/Master/texmf-dist/doc/latex/tikz-network/data/ml_vertices.csv
trunk/Master/texmf-dist/doc/latex/tikz-network/data/ml_vertices_simple.csv
trunk/Master/texmf-dist/doc/latex/tikz-network/data/plane.png
trunk/Master/texmf-dist/doc/latex/tikz-network/data/vertices.csv
trunk/Master/texmf-dist/doc/latex/tikz-network/data/vertices_RGB.csv
trunk/Master/texmf-dist/doc/latex/tikz-network/tikz-network.pdf
trunk/Master/texmf-dist/doc/latex/tikz-network/tikz-network.tex
trunk/Master/texmf-dist/tex/latex/tikz-network/
trunk/Master/texmf-dist/tex/latex/tikz-network/tikz-network.sty
trunk/Master/tlpkg/tlpsrc/tikz-network.tlpsrc
Added: trunk/Master/texmf-dist/doc/latex/tikz-network/README.md
===================================================================
--- trunk/Master/texmf-dist/doc/latex/tikz-network/README.md (rev 0)
+++ trunk/Master/texmf-dist/doc/latex/tikz-network/README.md 2018-07-30 21:13:38 UTC (rev 48314)
@@ -0,0 +1,71 @@
+# tikz-network - A tool to visualize complex networks in LaTeX.
+
+## Summary
+
+**tikz-network** is an open source software project for visualizing graphs and
+networks in LaTeX. It aims to provide a simple and easy tool to create,
+visualize and modify complex networks. The packaged is based on the PGF/TikZ
+languages for producing vector graphics from a geometric/algebraic
+description. Particular focus is made on the software usability and
+interoperability with other tools. Simple networks can be directly created
+within LaTeX, while more complex networks can be imported from external
+sources (e.g. igraph, networkx, QGIS, ...). Additionally, **tikz-network**
+supports visualization of multilayer networks in two and three dimensions.
+
+## Purpose
+
+In recent years, complex network theory becomes more and more popular within the
+scientific community. Besides a solid mathematical base on which these theories
+are built on, a visual representation of the networks allow communicating
+complex relationships to a broad audience.
+
+Nowadays, a variety of great visualization tools are available, which helps to
+structure, filter, manipulate and of course to visualize the networks. However,
+they come with some limitations, including the need for specific software tools,
+difficulties to embed the outputs properly in a LaTeX file (e.g. font type,
+font size, additional equations and math symbols needed,...) and challenges
+in the post-processing of the graphs, without rerunning the software tools
+again.
+
+In order to overcome this issues, the package **tikz-network*** was
+created. Since LaTeX is a standard for scientific publications and widely
+used, there is a high chance that users are already familiar with the syntax and
+the structure of this language. Beside LaTeX, no other software tool is
+needed. The commands of **tikz-network** are kept simple but allow a high
+control over the produced output. Post-processing of the network (e.g. adding
+drawings, images, texts, equations,...) can be done easily, due to the
+compatibility with PGF/TikZ (Tantau 2015). Also, the embedding of
+the network visualization into the LaTeX-environment enables the use of the
+fonts, font sizes, mathematical symbols, hyperlinks, references,..., as used
+in the document. Additional features are the three-dimensional visualization of
+(multilayer) networks, and the compatible with other layout and visualization
+tools (e.g. igraph, netwrokx, QGIS, ...).
+
+## Additional information and examples
+
+- The usage of the package is documented in the
+ [manual](https://github.com/hackl/tikz-network/blob/master/manual.pdf)
+ ([arXiv](https://arxiv.org/pdf/1709.06005.pdf)).
+- The current developer version of the package is available on
+ [GitHub](https://github.com/hackl/tikz-network).
+- [There](https://github.com/hackl/tikz-network/tree/master/examples), also
+ additional (more complex) examples can be found.
+- To convert networks from Python into TikZ an API for the package is available
+ under <https://pypi.org/project/network2tikz/> or
+ <https://github.com/hackl/network2tikz>
+
+## License
+
+Copyright (c) 2018 [Juergen Hackl](mailto:hackl.j at gmx.at)
+
+This program is free software: you can redistribute it and/or modify it under
+the terms of the GNU General Public License as published by the Free Software
+Foundation, either version 3 of the License, or (at your option) any later
+version.
+
+This program is distributed in the hope that it will be useful, but WITHOUT ANY
+WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+PARTICULAR PURPOSE. See the GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License along with
+this program. If not, see <http://www.gnu.org/licenses/>.
Property changes on: trunk/Master/texmf-dist/doc/latex/tikz-network/README.md
___________________________________________________________________
Added: svn:eol-style
## -0,0 +1 ##
+native
\ No newline at end of property
Added: trunk/Master/texmf-dist/doc/latex/tikz-network/data/edges.csv
===================================================================
--- trunk/Master/texmf-dist/doc/latex/tikz-network/data/edges.csv (rev 0)
+++ trunk/Master/texmf-dist/doc/latex/tikz-network/data/edges.csv 2018-07-30 21:13:38 UTC (rev 48314)
@@ -0,0 +1,7 @@
+u,v,label,lw,color ,opacity,bend, R , G , B ,Direct
+A,B, ab ,.5,red , 1 , 30, 0,120,255,false
+B,C, bc ,.7,blue , 1 , -60, 76, 55,255,false
+B,D, bd ,.5,blue , .5 , -60, 76, 55,255,false
+A,E, ae , 1,green , 1 , 75,255, 0, 0,true
+C,E, ce , 2,orange, 1 , 0,150,150,150,false
+A,A, aa ,.3,black , .5 , 75,255, 0 ,0,false
Property changes on: trunk/Master/texmf-dist/doc/latex/tikz-network/data/edges.csv
___________________________________________________________________
Added: svn:eol-style
## -0,0 +1 ##
+native
\ No newline at end of property
Added: trunk/Master/texmf-dist/doc/latex/tikz-network/data/front.pdf
===================================================================
(Binary files differ)
Index: trunk/Master/texmf-dist/doc/latex/tikz-network/data/front.pdf
===================================================================
--- trunk/Master/texmf-dist/doc/latex/tikz-network/data/front.pdf 2018-07-30 21:12:14 UTC (rev 48313)
+++ trunk/Master/texmf-dist/doc/latex/tikz-network/data/front.pdf 2018-07-30 21:13:38 UTC (rev 48314)
Property changes on: trunk/Master/texmf-dist/doc/latex/tikz-network/data/front.pdf
___________________________________________________________________
Added: svn:mime-type
## -0,0 +1 ##
+application/pdf
\ No newline at end of property
Added: trunk/Master/texmf-dist/doc/latex/tikz-network/data/ml_edges.csv
===================================================================
--- trunk/Master/texmf-dist/doc/latex/tikz-network/data/ml_edges.csv (rev 0)
+++ trunk/Master/texmf-dist/doc/latex/tikz-network/data/ml_edges.csv 2018-07-30 21:13:38 UTC (rev 48314)
@@ -0,0 +1,12 @@
+u,v,label,lw,color ,opacity,bend,Direct
+A,B, ab ,.5,red , 1 , 30,false
+B,C, bc ,.7,blue , 1 , -60,false
+A,E, ae , 1,green , 1 , 45,true
+C,E, ce , 2,orange, 1 , 0,false
+A,A, aa ,.3,black , .5 , 75,false
+C,G, cg , 1,blue , .5 , 0,false
+E,H, eh , 1,gray , .5 , 0,false
+F,A, fa ,.7,red , .7 , 0,true
+D,F, df ,.7,cyan , 1 , 30,true
+F,H, fh ,.7,purple, 1 , 60,false
+D,G, dg ,.7,blue , .7 , 60,false
Property changes on: trunk/Master/texmf-dist/doc/latex/tikz-network/data/ml_edges.csv
___________________________________________________________________
Added: svn:eol-style
## -0,0 +1 ##
+native
\ No newline at end of property
Added: trunk/Master/texmf-dist/doc/latex/tikz-network/data/ml_edges_simple.csv
===================================================================
--- trunk/Master/texmf-dist/doc/latex/tikz-network/data/ml_edges_simple.csv (rev 0)
+++ trunk/Master/texmf-dist/doc/latex/tikz-network/data/ml_edges_simple.csv 2018-07-30 21:13:38 UTC (rev 48314)
@@ -0,0 +1,12 @@
+u,v
+A,B
+B,C
+A,E
+C,E
+A,A
+C,G
+E,H
+F,A
+D,F
+F,H
+D,G
Property changes on: trunk/Master/texmf-dist/doc/latex/tikz-network/data/ml_edges_simple.csv
___________________________________________________________________
Added: svn:eol-style
## -0,0 +1 ##
+native
\ No newline at end of property
Added: trunk/Master/texmf-dist/doc/latex/tikz-network/data/ml_vertices.csv
===================================================================
--- trunk/Master/texmf-dist/doc/latex/tikz-network/data/ml_vertices.csv (rev 0)
+++ trunk/Master/texmf-dist/doc/latex/tikz-network/data/ml_vertices.csv 2018-07-30 21:13:38 UTC (rev 48314)
@@ -0,0 +1,9 @@
+id, x, y ,size, color,opacity,label,layer
+ A, 0, 0, .4 , green, .9 , a , 1
+ B, 1, .7, .6 , , .5 , b , 1
+ C, 2, 1, .8 ,orange, .3 , c , 1
+ D, 2, 0, .5 , red, .7 , d , 2
+ E,.2,1.5, .5 , gray, , e , 1
+ F,.1, .5, .7 , blue, .3 , f , 2
+ G, 2, 1, .4 , cyan, .7 , g , 2
+ H, 1, 1, .4 ,yellow, .7 , h , 2
Property changes on: trunk/Master/texmf-dist/doc/latex/tikz-network/data/ml_vertices.csv
___________________________________________________________________
Added: svn:eol-style
## -0,0 +1 ##
+native
\ No newline at end of property
Added: trunk/Master/texmf-dist/doc/latex/tikz-network/data/ml_vertices_simple.csv
===================================================================
--- trunk/Master/texmf-dist/doc/latex/tikz-network/data/ml_vertices_simple.csv (rev 0)
+++ trunk/Master/texmf-dist/doc/latex/tikz-network/data/ml_vertices_simple.csv 2018-07-30 21:13:38 UTC (rev 48314)
@@ -0,0 +1,9 @@
+id, x, y ,layer
+ A, 0, 0, 1
+ B, 1, .7, 1
+ C, 2, 1, 1
+ D, 2, 0, 2
+ E,.2,1.5, 1
+ F,.1, .5, 2
+ G, 2, 1, 2
+ H, 1, 1, 2
Property changes on: trunk/Master/texmf-dist/doc/latex/tikz-network/data/ml_vertices_simple.csv
___________________________________________________________________
Added: svn:eol-style
## -0,0 +1 ##
+native
\ No newline at end of property
Added: trunk/Master/texmf-dist/doc/latex/tikz-network/data/plane.png
===================================================================
(Binary files differ)
Index: trunk/Master/texmf-dist/doc/latex/tikz-network/data/plane.png
===================================================================
--- trunk/Master/texmf-dist/doc/latex/tikz-network/data/plane.png 2018-07-30 21:12:14 UTC (rev 48313)
+++ trunk/Master/texmf-dist/doc/latex/tikz-network/data/plane.png 2018-07-30 21:13:38 UTC (rev 48314)
Property changes on: trunk/Master/texmf-dist/doc/latex/tikz-network/data/plane.png
___________________________________________________________________
Added: svn:mime-type
## -0,0 +1 ##
+application/octet-stream
\ No newline at end of property
Added: trunk/Master/texmf-dist/doc/latex/tikz-network/data/vertices.csv
===================================================================
--- trunk/Master/texmf-dist/doc/latex/tikz-network/data/vertices.csv (rev 0)
+++ trunk/Master/texmf-dist/doc/latex/tikz-network/data/vertices.csv 2018-07-30 21:13:38 UTC (rev 48314)
@@ -0,0 +1,6 @@
+id, x, y ,size, color,opacity,label,IdAsLabel,NoLabel
+ A, 0, 0, .4 , green, .9 , a , false , false
+ B, 1, .7, .6 , , .5 , b , false , false
+ C, 2, 1, .8 ,orange, .3 , c , false , true
+ D, 2, 0, .5 , red, .7 , d , true , false
+ E,.2,1.5, .5 , gray, , e , false , false
Property changes on: trunk/Master/texmf-dist/doc/latex/tikz-network/data/vertices.csv
___________________________________________________________________
Added: svn:eol-style
## -0,0 +1 ##
+native
\ No newline at end of property
Added: trunk/Master/texmf-dist/doc/latex/tikz-network/data/vertices_RGB.csv
===================================================================
--- trunk/Master/texmf-dist/doc/latex/tikz-network/data/vertices_RGB.csv (rev 0)
+++ trunk/Master/texmf-dist/doc/latex/tikz-network/data/vertices_RGB.csv 2018-07-30 21:13:38 UTC (rev 48314)
@@ -0,0 +1,6 @@
+id, x, y ,size, color,opacity,label, R , G , B
+ A, 0, 0, .4 , green, .9 , a ,255, 0, 0
+ B, 1, .7, .6 , , .5 , b , 0,255, 0
+ C, 2, 1, .8 ,orange, .3 , c , 0, 0,255
+ D, 2, 0, .5 , red, .7 , d , 10,120,255
+ E,.2,1.5, .5 , gray, , e , 76, 55,255
Property changes on: trunk/Master/texmf-dist/doc/latex/tikz-network/data/vertices_RGB.csv
___________________________________________________________________
Added: svn:eol-style
## -0,0 +1 ##
+native
\ No newline at end of property
Added: trunk/Master/texmf-dist/doc/latex/tikz-network/tikz-network.pdf
===================================================================
(Binary files differ)
Index: trunk/Master/texmf-dist/doc/latex/tikz-network/tikz-network.pdf
===================================================================
--- trunk/Master/texmf-dist/doc/latex/tikz-network/tikz-network.pdf 2018-07-30 21:12:14 UTC (rev 48313)
+++ trunk/Master/texmf-dist/doc/latex/tikz-network/tikz-network.pdf 2018-07-30 21:13:38 UTC (rev 48314)
Property changes on: trunk/Master/texmf-dist/doc/latex/tikz-network/tikz-network.pdf
___________________________________________________________________
Added: svn:mime-type
## -0,0 +1 ##
+application/pdf
\ No newline at end of property
Added: trunk/Master/texmf-dist/doc/latex/tikz-network/tikz-network.tex
===================================================================
--- trunk/Master/texmf-dist/doc/latex/tikz-network/tikz-network.tex (rev 0)
+++ trunk/Master/texmf-dist/doc/latex/tikz-network/tikz-network.tex 2018-07-30 21:13:38 UTC (rev 48314)
@@ -0,0 +1,3922 @@
+% =============================================================================
+% File : tikz-network.tex -- The manual for the package tikz-network
+% Author : Juergen Hackl <hackl.j at gmx.at>
+% Creation : 2018-07-30
+% Time-stamp: <Mon 2018-07-30 11:28 juergen>
+%
+% Copyright (c) 2018 Juergen Hackl <hackl.j at gmx.at>
+%
+% This program is free software: you can redistribute it and/or modify
+% it under the terms of the GNU General Public License as published by
+% the Free Software Foundation, either version 3 of the License, or
+% (at your option) any later version.
+%
+% This program is distributed in the hope that it will be useful,
+% but WITHOUT ANY WARRANTY; without even the implied warranty of
+% MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+% GNU General Public License for more details.
+%
+% You should have received a copy of the GNU General Public License
+% along with this program. If not, see <http://www.gnu.org/licenses/>.
+% =============================================================================
+
+\documentclass[a4paper,twosided,notoc]{tufte-book}
+\usepackage{siunitx}
+\hypersetup{colorlinks}% uncomment this line if you prefer colored hyperlinks (e.g., for onscreen viewing)
+
+%%
+% Book metadata
+\title{tikz-network\\manual}
+\author[J\"urgen Hackl]{J\"urgen Hackl}
+\publisher{Version 1.0}
+
+%%
+% If they're installed, use Bergamo and Chantilly from www.fontsite.com.
+% They're clones of Bembo and Gill Sans, respectively.
+%\IfFileExists{bergamo.sty}{\usepackage[osf]{bergamo}}{}% Bembo
+%\IfFileExists{chantill.sty}{\usepackage{chantill}}{}% Gill Sans
+
+%\usepackage{microtype}
+
+\usepackage{framed}
+\definecolor{shadecolor}{HTML}{abd7e6}%{cmyk}{0.49,0.22,.15,0}
+\definecolor{hlcolor}{HTML}{057498}%{cmyk}{0.49,0.22,.15,0}
+\FrameSep0pt
+
+\usepackage{tikz}
+\usetikzlibrary{backgrounds}
+\tikzset{background rectangle/.style={fill=yellow!30}}
+
+
+%%
+% Just some sample text
+\usepackage{lipsum}
+
+%%
+% For nicely typeset tabular material
+\usepackage{booktabs}
+\usepackage{tabularx}
+
+%%
+% For graphics / images
+\usepackage{graphicx}
+\setkeys{Gin}{width=\linewidth,totalheight=\textheight,keepaspectratio}
+\graphicspath{{data/}}
+
+% The fancyvrb package lets us customize the formatting of verbatim
+% environments. We use a slightly smaller font.
+\usepackage{fancyvrb}
+\fvset{fontsize=\normalsize}
+
+%%
+% Prints argument within hanging parentheses (i.e., parentheses that take
+% up no horizontal space). Useful in tabular environments.
+\newcommand{\hangp}[1]{\makebox[0pt][r]{(}#1\makebox[0pt][l]{)}}
+
+%%
+% Prints an asterisk that takes up no horizontal space.
+% Useful in tabular environments.
+\newcommand{\hangstar}{\makebox[0pt][l]{*}}
+
+%%
+% Prints a trailing space in a smart way.
+\usepackage{xspace}
+
+%%
+% Some shortcuts for Tufte's book titles. The lowercase commands will
+% produce the initials of the book title in italics. The all-caps commands
+% will print out the full title of the book in italics.
+\newcommand{\vdqi}{\textit{VDQI}\xspace}
+\newcommand{\ei}{\textit{EI}\xspace}
+\newcommand{\ve}{\textit{VE}\xspace}
+\newcommand{\be}{\textit{BE}\xspace}
+\newcommand{\VDQI}{\textit{The Visual Display of Quantitative Information}\xspace}
+\newcommand{\EI}{\textit{Envisioning Information}\xspace}
+\newcommand{\VE}{\textit{Visual Explanations}\xspace}
+\newcommand{\BE}{\textit{Beautiful Evidence}\xspace}
+
+\newcommand{\TL}{Tufte-\LaTeX\xspace}
+
+% Prints the month name (e.g., January) and the year (e.g., 2008)
+\newcommand{\monthyear}{%
+ \ifcase\month\or January\or February\or March\or April\or May\or June\or
+ July\or August\or September\or October\or November\or
+ December\fi\space\number\year
+}
+
+
+% Prints an epigraph and speaker in sans serif, all-caps type.
+\newcommand{\openepigraph}[2]{%
+ %\sffamily\fontsize{14}{16}\selectfont
+ \begin{fullwidth}
+ \sffamily\large
+ \begin{doublespace}
+ \noindent\allcaps{#1}\\% epigraph
+ \noindent\allcaps{#2}% author
+ \end{doublespace}
+ \end{fullwidth}
+}
+
+% Inserts a blank page
+\newcommand{\blankpage}{\newpage\hbox{}\thispagestyle{empty}\newpage}
+
+\usepackage{units}
+
+% Typesets the font size, leading, and measure in the form of 10/12x26 pc.
+\newcommand{\measure}[3]{#1/#2$\times$\unit[#3]{pc}}
+
+% Macros for typesetting the documentation
+\newcommand{\hlred}[1]{\textcolor{hlcolor}{#1}}% prints in red
+\newcommand{\hangleft}[1]{\makebox[0pt][r]{#1}}
+\newcommand{\hairsp}{\hspace{1pt}}% hair space
+\newcommand{\hquad}{\hskip0.5em\relax}% half quad space
+\newcommand{\TODO}{\textcolor{red}{\bf TODO!}\xspace}
+\newcommand{\na}{\quad--}% used in tables for N/A cells
+\providecommand{\XeLaTeX}{X\lower.5ex\hbox{\kern-0.15em\reflectbox{E}}\kern-0.1em\LaTeX}
+\newcommand{\tXeLaTeX}{\XeLaTeX\index{XeLaTeX@\protect\XeLaTeX}}
+% \index{\texttt{\textbackslash xyz}@\hangleft{\texttt{\textbackslash}}\texttt{xyz}}
+\newcommand{\tuftebs}{\symbol{'134}}% a backslash in tt type in OT1/T1
+\newcommand{\doccmdnoindex}[2][]{\texttt{\tuftebs#2}}% command name -- adds backslash automatically (and doesn't add cmd to the index)
+\newcommand{\doccmddef}[2][]{%
+ \hlred{\texttt{\tuftebs#2}}\label{cmd:#2}%
+ \ifthenelse{\isempty{#1}}%
+ {% add the command to the index
+ \index{#2 command@\protect\hangleft{\texttt{\tuftebs}}\texttt{#2}}% command name
+ }%
+ {% add the command and package to the index
+ \index{#2 command@\protect\hangleft{\texttt{\tuftebs}}\texttt{#2} (\texttt{#1} package)}% command name
+ \index{#1 package@\texttt{#1} package}\index{packages!#1@\texttt{#1}}% package name
+ }%
+}% command name -- adds backslash automatically
+\newcommand{\doccmd}[2][]{%
+ \texttt{\tuftebs#2}%
+ \ifthenelse{\isempty{#1}}%
+ {% add the command to the index
+ \index{#2 command@\protect\hangleft{\texttt{\tuftebs}}\texttt{#2}}% command name
+ }%
+ {% add the command and package to the index
+ \index{#2 command@\protect\hangleft{\texttt{\tuftebs}}\texttt{#2} (\texttt{#1} package)}% command name
+ \index{#1 package@\texttt{#1} package}\index{packages!#1@\texttt{#1}}% package name
+ }%
+}% command name -- adds backslash automatically
+\newcommand{\docopt}[1]{\ensuremath{\langle}\textrm{\textit{#1}}\ensuremath{\rangle}}% optional command argument
+\newcommand{\docarg}[1]{\textrm{\textit{#1}}}% (required) command argument
+%%%\newenvironment{docspec}{\begin{shaded}\begin{quotation}\ttfamily\parskip0pt\parindent0pt\ignorespaces}{\end{quotation}\end{shaded}}% command specification environment
+\newenvironment{docspecdef}{\begin{quotation}\ttfamily\parskip0pt\parindent0pt\ignorespaces}{\end{quotation}}% command specification environment
+\newcommand{\docenv}[1]{\texttt{#1}\index{#1 environment@\texttt{#1} environment}\index{environments!#1@\texttt{#1}}}% environment name
+\newcommand{\docenvdef}[1]{\hlred{\texttt{#1}}\label{env:#1}\index{#1 environment@\texttt{#1} environment}\index{environments!#1@\texttt{#1}}}% environment name
+\newcommand{\docpkg}[1]{\texttt{#1}\index{#1 package@\texttt{#1} package}\index{packages!#1@\texttt{#1}}}% package name
+\newcommand{\doccls}[1]{\texttt{#1}}% document class name
+\newcommand{\docclsopt}[1]{\texttt{#1}\index{#1 class option@\texttt{#1} class option}\index{class options!#1@\texttt{#1}}}% document class option name
+\newcommand{\docclsoptdef}[1]{\hlred{\texttt{#1}}\label{clsopt:#1}\index{#1 class option@\texttt{#1} class option}\index{class options!#1@\texttt{#1}}}% document class option name defined
+\newcommand{\docmsg}[2]{\bigskip\begin{fullwidth}\noindent\ttfamily#1\end{fullwidth}\medskip\par\noindent#2}
+\newcommand{\docfilehook}[2]{\texttt{#1}\index{file hooks!#2}\index{#1@\texttt{#1}}}
+\newcommand{\doccounter}[1]{\texttt{#1}\index{#1 counter@\texttt{#1} counter}}
+
+
+\newenvironment{docspec}{\begin{shaded}}{\vspace{-5mm}\end{shaded}}% command specification environment
+
+
+% Numerate the sections
+\setcounter{secnumdepth}{2}
+
+\setcounter{tocdepth}{3}
+
+
+\usepackage{etoolbox}
+
+\makeatletter
+\patchcmd{\ttlh at hang}{\parindent\z@}{\parindent\z@\leavevmode}{}{}
+%\patchcmd{\ttlh at hang}{\noindent}{}{}{}
+\patchcmd{\ttlh at hang}{\noindent}{}{}{}
+\makeatother
+
+
+% chapter format
+\titleformat{\chapter}%
+ {\huge\rmfamily\itshape}% format applied to label+text
+ {\llap{\parbox{1.5cm}{\hfill\itshape\huge\thechapter}\hspace{2mm}}}% label
+ {0em}% horizontal separation between label and title body
+ {}% before the title body
+ []% after the title body
+
+% section format
+\titleformat{\section}%
+ {\normalfont\Large\itshape}% format applied to label+text
+ {\llap{\parbox{1.0cm}{\hfill\thesection}\hspace{2mm}}}% label
+ {0em}% horizontal separation between label and title body
+ {}% before the title body
+ []% after the title body
+
+% subsection format
+\titleformat{\subsection}%
+ {\normalfont\large\itshape}% format applied to label+text
+ {\llap{\parbox{1.5cm}{\hfill\thesubsection}\hspace{2mm}}}% label
+ {0em}% horizontal separation between label and title body
+ {}% before the title body
+ []% after the title body
+
+\newcommand{\pkg}{\doccls{tikz-network}\xspace}
+\newcommand{\tikzsym}{Ti\emph{k}Z }
+
+\usepackage{listings}
+\lstset{ %
+basicstyle=\small\linespread{.8}\ttfamily,
+commentstyle=\itshape\color{black!70},
+stepnumber=2,
+showspaces=false,
+showstringspaces=false,
+showtabs=false,
+tabsize=2,
+captionpos=b,
+breaklines=true,
+breakatwhitespace=false,
+title=\lstname,
+escapeinside={+*}{*+},
+morekeywords={*,...},
+stringstyle=\ttfamily,
+emphstyle={\color{red}\bfseries},
+}
+
+\usepackage{tikz-network}
+
+
+% Generates the index
+\usepackage{makeidx}
+\makeindex
+
+\renewcommand{\chaptermark}[1]{%
+\markboth{#1}{}}
+
+\fancyhead[LE]{\thepage\quad\smallcaps{\newlinetospace{\leftmark}}}
+
+\begin{document}
+
+
+%\maketitle
+
+\thispagestyle{empty}
+
+ \begin{fullwidth}%
+\sffamily%
+ \fontsize{18}{20}\selectfont\par\noindent\textcolor{darkgray}{\allcaps{\thanklessauthor}}%
+ \vspace{11.5pc}%
+ \fontsize{36}{40}\selectfont\par\noindent\textcolor{darkgray}{\allcaps{\thanklesstitle}}%
+\vspace{3cm}
+\begin{center}
+\includegraphics[width=14cm]{data/front.pdf}%
+\end{center}
+\vfill%
+ \fontsize{14}{16}\selectfont\par\noindent\allcaps{\thanklesspublisher}%
+ \end{fullwidth}%
+
+
+\newpage
+
+\begin{fullwidth}
+% \begin{tikzpicture}[remember picture, overlay]
+% \node[rectangle,inner sep=2pt,fill=red!30,draw=black,text width=12cm] at ($(current page.center)+(0,6)$) {%
+% The \pkg package is still under development. Hence, changes in the commands and functionality cannot be excluded.
+% };
+% \end{tikzpicture}
+
+~\vfill
+\thispagestyle{empty}
+\setlength{\parindent}{0pt}
+\setlength{\parskip}{\baselineskip}
+
+
+\par\smallcaps{\pkg}
+\par\smallcaps{\thanklesspublisher}
+\par\smallcaps{\url{https://github.com/hackl/tikz-network}}
+
+\par\textit{Released, \monthyear}
+
+Copyright \copyright\ \the\year\ \thanklessauthor
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 3 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program. If not, see \url{https://www.gnu.org/licenses/}.
+
+
+\end{fullwidth}
+
+\begin{fullwidth}
+\tableofcontents
+\end{fullwidth}
+
+\cleardoublepage
+\chapter{Introduction}
+
+In recent years, complex network theory becomes more and more popular within the scientific community. Besides a solid mathematical base on which these theories are built on, a visual representation of the networks allow communicating complex relationships to a broad audience.
+
+Nowadays, a variety of great visualization tools are available, which helps to structure, filter, manipulate and of course to visualize the networks. However, they come with some limitations, including the need for specific software tools, difficulties to embed the outputs properly in a \LaTeX~file (e.g. font type, font size, additional equations and math symbols needed, \dots) and challenges in the post-processing of the graphs, without rerunning the software tools again.
+
+In order to overcome this issues, the package \pkg was created. Some of the features are:
+
+\begin{itemize}
+\item \LaTeX~ is a standard for scientific publications and widely used
+\item beside \LaTeX~ no other software is needed
+\item no programming skills are needed
+\item simple to use but allows 100\% control over the output
+\item easy for post-processing (e.g. adding drawings, texts, equations,\dots)
+\item same fonts, font sizes, mathematical symbols, \dots as in the document
+\item no quality loss of the output due to the pdf format
+\item networks are easy to adapt or modify for lectures or small examples
+\item able to visualize larger networks
+\item three-dimensional visualization of (multilayer) networks
+\item compatible with other visualization tools
+\end{itemize}
+\newpage
+
+\section{How to read this manual?}
+
+The aim of this manual is to describe the use of the \pkg library for visualizing networks. To ensure an easy use of the elements and to keep the clarity, this manual is structured as follows:
+\begin{itemize}
+\item In Chapter \ref{chap:simple_networks} the elements to create simple networks (by hand) in a plane are explained. Thereby, the use of the commands \doccmd{Vertex} and \doccmd{Edge} are shown.
+\item How to create complex networks from external files\footnote{e.g. \doccls{igraph} or \doccls{networkx}} are explained in Chapter \ref{chap:complex_networks}. The main commands, therefore are \doccmd{Vertices} and \doccmd{Edges} which are using the same options as in the simple case.
+\item In Chapter \ref{chap:multilayer_networks}, the visualization of multilayer networks is explained. Additional visualization tools such as \doccmd{Plane} and \docenv{Layer} are introduced.
+\item The default settings used and how they can be modified is explained in Chapter \ref{chap:default_settings}.
+\item Information about troubleshooting and support is given in Chapter \ref{chap:troubleshooting}
+\item Since this is the alpha version (0.1) of the package, features which will be probably added and commands which have to be fixed are listed in Appendix \ref{chap:todo}.
+\end{itemize}
+
+\subsection{A few explanations}
+
+The images in this manual are created with the \pkg library or \tikzsym. The code used for this is
+specified for each image.
+\begin{marginfigure}[30mm]
+\centering
+ \begin{tikzpicture}%[framed]
+ \filldraw (-.2,.2) circle (2pt) (.2,.2) circle (2pt);
+ \draw (0,0) circle (5mm) (-.3,-.1) .. controls (0,-.3) .. (.3,-.1);
+ \end{tikzpicture}
+\end{marginfigure}
+
+\begin{docspec}
+\begin{lstlisting}
+ \begin{tikzpicture}
+ \filldraw (-.2,.2) circle (2pt) (.2,.2) circle (2pt);
+ \draw (0,0) circle (5mm) (-.3,-.1) .. controls (0,-.3) .. (.3,-.1);
+ \end{tikzpicture}
+\end{lstlisting}
+\end{docspec}
+
+Special additions which are needed for a better understanding are shown in orange but are not in the sample code available.
+
+\begin{marginfigure}[23mm]
+\centering
+ \begin{tikzpicture}%[framed]
+ \filldraw [orange] (0,0) circle (2pt)
+ (1,1) circle (2pt)
+ (2,1) circle (2pt)
+ (2,0) circle (2pt);
+ \draw (0,0) .. controls (1,1) and (2,1) .. (2,0);
+ \end{tikzpicture}
+\end{marginfigure}
+
+\begin{docspec}
+\begin{lstlisting}
+ \begin{tikzpicture}
+ \draw (0,0) .. controls (1,1) and (2,1) .. (2,0);
+ \end{tikzpicture}
+\end{lstlisting}
+\end{docspec}
+
+\subsection{Inputs}
+\label{sec:inputs}
+
+The commands in the \pkg library (e.g. \doccmd{Vertex}, \doccmd{Edge}) always start with capital letters and DO NOT need a semicolon <<;>> at the end. Boolean arguments start also with capital letters (e.g. \docopt{NoLabel}). Arguments which need an user input, use are written in small letters (e.g. \docopt{color}).
+
+Basically, one can distinguish between the mandatory argument $\{~\}$ and the optional argument $[~]$. The first values must be entered compulsory. By contrast, nothing has to be entered for the optional input. Additional features (e.g. \docopt{size})) can be activated when entering optional parameters.
+
+When entering size values the base unit is always predefined in $[cm]$\footnote{The default unit can be changed with \doccmd{SetDefaultUnit}; see Section~\ref{sec:gerneral_settings}}, except for line widths which are dedined in $[pt]$. Percentage values $\%$ are always specified as decimal values; for example, $100\% = 1.0 $ and $ 10 \% $ corresponds to $ 0.1 $.
+
+
+\subsection{Additional help}
+
+Is the manual not enough, occur some ambiguities or some \tikzsym commands are unclear, please have a look in the ``\tikzsym and PGF Manual'' from Till Tantau\footnote{\url{http://mirror.switch.ch/ftp/mirror/tex/graphics/pgf/base/doc/pgfmanual.pdf}}.
+
+Should you have any further questions, please do not hesitate to contact me.
+
+\section{Installation}
+\label{sec:Installation}
+
+Actually, we can hardly speak of an installation since only the necessary package \pkg must be loaded in the preamble of your document.
+
+The current release of the package is available via CTAN\footnote{\url{https://ctan.org/pkg/tikz-network}}. A release candidate for the next version of \pkg is available on github\footnote{\url{https://github.com/hackl/}}
+
+Is the package installed or the style file is stored in the folder of the main file, so the library can be imported, as the following example shows:
+
+\begin{docspec}
+\begin{lstlisting}
+ % ------------
+ % header
+ \documentclass{scrreprt}
+
+ % ------------
+ % packages
+ \usepackage{tikz-network}
+\end{lstlisting}
+\end{docspec}
+
+\section{Additional necessary packages}
+
+To use all commands and options of \tikzsym, possibly some packages need to be reloaded. These missing files (or their names) appear in the error log when you convert the file. However, for the package described in this manual, it is sufficient to use the library and the \tikzsym standard commands.
+
+\chapter{Simple Networks}
+\label{chap:simple_networks}
+
+\section{Vertex}
+\label{sec:vertex}
+On essential command is \doccmddef{Vertex}, which allow placing vertices in the document and modify their appearance.
+\begin{docspecdef}
+ \doccmd{Vertex}[\docopt{local options}]\{\docarg{Name}\}
+\end{docspecdef}
+In order to be able to place a vertex, a non-empty \docarg{Name} argument is required. This argument defines the vertex's reference name, which must be unique. Mathematical symbols are not allowed as name as well as no blank spaces. The \docarg{Name} should not be confused with the \docopt{label}, that is used for display; for example one may want to display $A_1$ while the name will be \docarg{A1}.
+
+For a \doccmd{Vertex} the following options are available:
+
+\begin{table}[h]\index{Vertex!options}
+ \footnotesize%
+ \begin{center}
+ \begin{tabular}{lccl}
+ \toprule
+ Option & Default & Type &Definition \\
+ \midrule
+ x & 0 & measure& x-coordinate \\
+ y & 0 & measure& y-coordinate \\
+ size & \{\} & measure& diameter of the circle\\
+ color & \{\} & color & fill color of vertex\\
+ opacity & \{\} & number & opacity of the fill color \\
+ shape & \{\} & string & shape of the vertex\\
+ label & \{\} & string & label \\
+ fontsize & \{\} & string & font size of the label\\
+ fontcolor & \{\} & color & font color of the label\\
+ fontscale & \{\} & number & scale of the label\\
+ position & center& value$^a$ & label position\\
+ distance & 0 & measure & label distance from the center \\
+ style & \{\} & string & additional \tikzsym styles \\
+ layer & \{\} & number & assigned layer of the vertex \\
+ \midrule
+ NoLabel & false & Boolean & delete the label \\
+ IdAsLabel & false & Boolean & uses the \docarg{Name} as label \\
+ Math & false & Boolean & displays the label in math mode \\
+ RGB & false & Boolean & allow RGB colors \\
+ Pseudo & false & Boolean & create a pseudo vertex\\
+ \bottomrule
+ \end{tabular}
+ \scriptsize
+ \\$^a$ either measure or string
+ \end{center}
+ \caption{Local options for the \doccmd{Vertex} command.}
+ \label{tab:vertex_options}
+\end{table}
+
+The order how the options are entered does not matter. Changes to the default Vertex layout can be made with \doccmd{SetVertexStyle}\footnote{see Section \ref{sec:vertex_style}}
+
+\begin{docspecdef}
+ \doccmd{Vertex}[\docopt{x}=\docarg{measure},\docopt{y}=\docarg{measure}]\{\docarg{Name}\}
+\end{docspecdef}
+
+The location of the vertices are determined by Cartesian coordinates in \docopt{x} and \docopt{y}. The coordinates are optional. If no coordinates are determined the vertex will be placed at the origin ($0,0$). The entered \docarg{measures} are in default units (\si{cm}). Changing the unites (locally) can be done by adding the unit to the \docarg{measure}\footnote{e.g. x=\SI{1}{in}}. Changes to the default setting can be made with \doccmd{SetDefaultUnit}\footnote{see Section \ref{sec:gerneral_settings}}.
+
+%\newpage
+\begin{marginfigure}[6mm]
+\centering
+ \begin{tikzpicture}
+ \Vertex{A}
+ \Vertex[x=1,y=1]{B}
+ \Vertex[x=2]{C}
+ \node at (0,0)[font=\footnotesize,orange]{\textbf{A}};
+ \node at (1,1)[font=\footnotesize,orange]{\textbf{B}};
+ \node at (2,0)[font=\footnotesize,orange]{\textbf{C}};
+ \end{tikzpicture}
+\end{marginfigure}
+
+\begin{docspec}
+\begin{lstlisting}
+ \begin{tikzpicture}
+ \Vertex{A}
+ \Vertex[x=1,y=1]{B}
+ \Vertex[x=2]{C}
+ \end{tikzpicture}
+\end{lstlisting}
+\end{docspec}
+
+\begin{docspecdef}
+ \doccmd{Vertex}[\docopt{size}=\docarg{measure}]\{\docarg{Name}\}
+\end{docspecdef}
+
+The diameter of the vertex can be changed with the option \docopt{size}. Per default a vertex has \SI{0.6}{cm} in diameter. Also, here the default units are \si{cm} and have not to be added to the \docarg{measure}.
+
+\begin{marginfigure}[34mm]
+\centering
+ \begin{tikzpicture}
+ \Vertex[size=.3]{A}
+ \Vertex[x=1,size=.7]{B}
+ \Vertex[x=2.3,size=1]{C}
+ \end{tikzpicture}
+\end{marginfigure}
+
+\begin{docspec}
+\begin{lstlisting}
+ \begin{tikzpicture}
+ \Vertex[size=.3]{A}
+ \Vertex[x=1,size=.7]{B}
+ \Vertex[x=2.3,size=1]{C}
+ \end{tikzpicture}
+\end{lstlisting}
+\end{docspec}
+
+\begin{docspecdef}
+ \doccmd{Vertex}[\docopt{color}=\docarg{color}]\{\docarg{Name}\}
+\end{docspecdef}
+
+To change the fill color of each vertex individually, the option \docopt{color} has to be used. Without the option \docopt{RGB} set, the default \tikzsym and \LaTeX~ colors can be applied.
+
+\begin{marginfigure}[34mm]
+\centering
+ \begin{tikzpicture}
+ \Vertex[color = blue]{A}
+ \Vertex[x=1,color=red]{B}
+ \Vertex[x=2,color=green!70!blue]{C}
+ \end{tikzpicture}
+\end{marginfigure}
+
+\begin{docspec}
+\begin{lstlisting}
+ \begin{tikzpicture}
+ \Vertex[color = blue]{A}
+ \Vertex[x=1,color=red]{B}
+ \Vertex[x=2,color=green!70!blue]{C}
+ \end{tikzpicture}
+\end{lstlisting}
+\end{docspec}
+
+\begin{docspecdef}
+ \doccmd{Vertex}[\docopt{opacity}=\docarg{number}]\{\docarg{Name}\}
+\end{docspecdef}
+
+With the option \docopt{opacity} the opacity of the vertex fill color can be modified. The range of the \docarg{number} lies between $0$ and $1$. Where $0$ represents a fully transparent fill and $1$ a solid fill.
+
+\begin{marginfigure}[34mm]
+\centering
+ \begin{tikzpicture}
+ \draw[thick,orange,dashed] (-.5,0) -- (2.5,0);
+ \Vertex[opacity = 1]{A}
+ \Vertex[x=1,opacity =.7]{B}
+ \Vertex[x=2,opacity =.2]{C}
+ \end{tikzpicture}
+\end{marginfigure}
+
+\begin{docspec}
+\begin{lstlisting}
+ \begin{tikzpicture}
+ \Vertex[opacity = 1]{A}
+ \Vertex[x=1,opacity =.7]{B}
+ \Vertex[x=2,opacity =.2]{C}
+ \end{tikzpicture}
+\end{lstlisting}
+\end{docspec}
+
+\begin{docspecdef}
+ \doccmd{Vertex}[\docopt{shape}=\docarg{string}]\{\docarg{Name}\}
+\end{docspecdef}
+
+With the option \docopt{shape} the shape of the vertex can be modified. Thereby the shapes implemented in \tikzsym can be used, including: \docarg{circle}, \docarg{rectangle}, \docarg{diamond}, \docarg{trapezium}, \docarg{semicircle}, \docarg{isosceles triangle}, \dots.
+
+\begin{marginfigure}[34mm]
+\centering
+ \begin{tikzpicture}
+ \Vertex[shape = rectangle]{A}
+ \Vertex[x=1,shape = diamond]{B}
+ \Vertex[x=2,shape = isosceles triangle]{C}
+ \end{tikzpicture}
+\end{marginfigure}
+
+\begin{docspec}
+\begin{lstlisting}
+ \begin{tikzpicture}
+ \Vertex[shape = rectangle]{A}
+ \Vertex[x=1,shape = diamond]{B}
+ \Vertex[x=2,shape = isosceles triangle]{C}
+ \end{tikzpicture}
+\end{lstlisting}
+\end{docspec}
+
+\begin{docspecdef}
+ \doccmd{Vertex}[\docopt{label}=\docarg{string}]\{\docarg{Name}\}
+\end{docspecdef}
+
+In \pkg there are several ways to define the labels of the vertices and edges. The common way is via the option \docopt{label}. Here, any \docarg{string} argument can be used, including blank spaces. The environment \$ \$ can be used to display mathematical expressions.
+
+\begin{marginfigure}[34mm]
+\centering
+ \begin{tikzpicture}
+ \Vertex[label=foo]{A}
+ \Vertex[x=1,label=bar]{B}
+ \Vertex[x=2,label=$u_1$]{C}
+ \end{tikzpicture}
+\end{marginfigure}
+
+\begin{docspec}
+\begin{lstlisting}
+ \begin{tikzpicture}
+ \Vertex[label=foo]{A}
+ \Vertex[x=1,label=bar]{B}
+ \Vertex[x=2,label=$u_1$]{C}
+ \end{tikzpicture}
+\end{lstlisting}
+\end{docspec}
+
+\begin{docspecdef}
+ \doccmd{Vertex}[\docopt{label}=\docarg{string},\docopt{fontsize}=\docarg{string}]\{\docarg{Name}\}
+\end{docspecdef}
+
+The font size of the \docopt{label} can be modified with the option \docopt{fontsize}. Here common \LaTeX~ font size commands\footnote{e.g. \doccmd{tiny}, \doccmd{scriptsize}, \doccmd{footnotesize}, \doccmd{small}, \dots.} can be used to change the size of the label.
+
+\begin{marginfigure}[10mm]
+\centering
+ \begin{tikzpicture}
+ \Vertex[label=foo,fontsize=\normalsize]{A}
+ \Vertex[x=1,label=bar,fontsize=\tiny]{B}
+ \Vertex[x=2,label=$u_1$,fontsize=\large]{C}
+ \end{tikzpicture}
+\end{marginfigure}
+
+\begin{docspec}
+\begin{lstlisting}
+ \begin{tikzpicture}
+ \Vertex[label=foo,fontsize=\normalsize]{A}
+ \Vertex[x=1,label=bar,fontsize=\tiny]{B}
+ \Vertex[x=2,label=$u_1$,fontsize=\large]{C}
+ \end{tikzpicture}
+\end{lstlisting}
+\end{docspec}
+
+\begin{docspecdef}
+ \doccmd{Vertex}[\docopt{label}=\docarg{string},\docopt{fontcolor}=\docarg{color}]\{\docarg{Name}\}
+\end{docspecdef}
+
+The color of the \docopt{label} can be changed with the option \docopt{fontcolor}. Currently, only the default \tikzsym and \LaTeX~ colors are supported\footnote{\TODO Add RGB option!}.
+
+\begin{marginfigure}[8mm]
+\centering
+ \begin{tikzpicture}
+ \Vertex[label=foo,fontcolor=blue]{A}
+ \Vertex[x=1,label=bar,fontcolor=magenta]{B}
+ \Vertex[x=2,label=$u_1$,fontcolor=red]{C}
+ \end{tikzpicture}
+\end{marginfigure}
+
+\begin{docspec}
+\begin{lstlisting}
+ \begin{tikzpicture}
+ \Vertex[label=foo,fontcolor=blue]{A}
+ \Vertex[x=1,label=bar,fontcolor=magenta]{B}
+ \Vertex[x=2,label=$u_1$,fontcolor=red]{C}
+ \end{tikzpicture}
+\end{lstlisting}
+\end{docspec}
+
+\begin{docspecdef}
+ \doccmd{Vertex}[\docopt{label}=\docarg{string},\docopt{fontscale}=\docarg{number}]\{\docarg{Name}\}
+\end{docspecdef}
+
+Contrary to the option \docopt{fontsize}, the option \docopt{fontscale} does not change the font size itself but scales the curent font size up or down. The \docarg{number} defines the scale, where numbers between $0$ and $1$ down scale the font and numbers greater then $1$ up scale the label. For example $0.5$ reduces the size of the font to $50\%$ of its originial size, while $1.2$ scales the font to $120\%$.
+
+\begin{marginfigure}[34mm]
+\centering
+ \begin{tikzpicture}
+ \Vertex[label=foo,fontscale=0.5]{A}
+ \Vertex[x=1,label=bar,fontscale=1]{B}
+ \Vertex[x=2,label=$u_1$,fontscale=2]{C}
+ \end{tikzpicture}
+\end{marginfigure}
+
+\begin{docspec}
+\begin{lstlisting}
+ \begin{tikzpicture}
+ \Vertex[label=foo,fontscale=0.5]{A}
+ \Vertex[x=1,label=bar,fontscale=1]{B}
+ \Vertex[x=2,label=$u_1$,fontscale=2]{C}
+ \end{tikzpicture}
+\end{lstlisting}
+\end{docspec}
+
+\begin{docspecdef}
+ \doccmd{Vertex}[\docopt{label}=\docarg{string},\docopt{position}=\docarg{value},\docopt{distance}=\docarg{number}]\{\docarg{Name}\}
+\end{docspecdef}
+
+Per default the \docopt{position} of the \docopt{label} is in the \docarg{center} of the vertex. Classical \tikzsym commands\footnote{e.g. \docarg{above}, \docarg{below}, \docarg{left}, \docarg{right}, \docarg{above left}, \docarg{above right},\dots} can be used to change the \docopt{position} of the \docopt{label}. Instead, using such command, the position can be determined via an angle, by entering a \docarg{number} between $-360$ and $360$. The origin ($0^\circ$) is the $y$ axis. A positive \docarg{number} change the \docopt{position} counter clockwise, while a negative \docarg{number} make changes clockwise.
+
+With the option, \docopt{distance} the distance between the vertex and the label can be changed.
+
+\begin{marginfigure}[31mm]
+\centering
+ \begin{tikzpicture}
+ \Vertex[label=A,position=below]{A}
+ \Vertex[x=1,label=B,position=below,distance=2mm]{B}
+ \Vertex[x=2,label=C,position=30,distance=1mm]{C}
+ \draw[orange,dashed](2,0) --++ (7mm,0mm)(2,0)--++(30:7mm);
+ \draw[orange,->] (2.5,0) arc (0:30:5mm);
+ \node[orange] (x) at (2.6,-.2) {$30^\circ$};
+ \end{tikzpicture}
+\end{marginfigure}
+
+\begin{docspec}
+\begin{lstlisting}
+ \begin{tikzpicture}
+ \Vertex[label=A,position=below]{A}
+ \Vertex[x=1,label=B,position=below,distance=2mm]{B}
+ \Vertex[x=2,label=C,position=30,distance=1mm]{C}
+ \end{tikzpicture}
+\end{lstlisting}
+\end{docspec}
+
+\begin{docspecdef}
+ \doccmd{Vertex}[\docopt{style}=\{\docarg{string}\}]\{\docarg{Name}\}
+\end{docspecdef}
+
+Any other \tikzsym style option or command can be entered via the option \docopt{style}. Most of these commands can be found in the ``\tikzsym and PGF Manual''. Contain the commands additional options (e.g.\docopt{shading}=\docarg{ball}), then the argument for the \docopt{style} has to be between $\{~\}$ brackets.
+
+\begin{marginfigure}[32mm]
+\centering
+ \begin{tikzpicture}
+ \Vertex[style={color=green}]{A}
+ \Vertex[x=1,style=dashed]{B}
+ \Vertex[x=2,style={shading=ball}]{C}
+ \end{tikzpicture}
+\end{marginfigure}
+
+\begin{docspec}
+\begin{lstlisting}
+ \begin{tikzpicture}
+ \Vertex[style={color=green}]{A}
+ \Vertex[x=1,style=dashed]{B}
+ \Vertex[x=2,style={shading=ball}]{C}
+ \end{tikzpicture}
+\end{lstlisting}
+\end{docspec}
+
+\begin{docspecdef}
+ \doccmd{Vertex}[\docopt{IdAsLabel}]\{\docarg{Name}\}
+\end{docspecdef}
+\begin{docspecdef}
+ \doccmd{Vertex}[\docopt{NoLabel},\docopt{label}=\docarg{string}]\{\docarg{Name}\}
+\end{docspecdef}
+
+\docopt{IdAsLabel} is a Boolean option which assigns the \docarg{Name} of the vertex as label. On the contrary, \docopt{NoLabel} suppress all labels.
+
+\begin{marginfigure}[32mm]
+\centering
+ \begin{tikzpicture}
+ \Vertex[IdAsLabel]{A}
+ \Vertex[x=1,label=B,NoLabel]{B}
+ \Vertex[x=2,IdAsLabel,NoLabel]{C}
+ \end{tikzpicture}
+\end{marginfigure}
+
+\begin{docspec}
+\begin{lstlisting}
+ \begin{tikzpicture}
+ \Vertex[IdAsLabel]{A}
+ \Vertex[x=1,label=B,NoLabel]{B}
+ \Vertex[x=2,IdAsLabel,NoLabel]{C}
+ \end{tikzpicture}
+\end{lstlisting}
+\end{docspec}
+
+\begin{docspecdef}
+ \doccmd{Vertex}[\docopt{Math},\docopt{label}=\docarg{string}]\{\docarg{Name}\}
+\end{docspecdef}
+
+The option \docopt{Math} allows transforming labels into mathematical expressions without using the \$~\$ environment. In combination with \docopt{IdAsLabel} allows this option also mathematical expressions by the definition of the vertex \docarg{Name}.
+
+%\newpage
+\begin{marginfigure}[32mm]
+\centering
+ \begin{tikzpicture}
+ \Vertex[IdAsLabel]{A1}
+ \Vertex[x=1,label=B_1,Math]{B}
+ \Vertex[x=2,Math,IdAsLabel]{C_1}
+ \end{tikzpicture}
+\end{marginfigure}
+
+\begin{docspec}
+\begin{lstlisting}
+ \begin{tikzpicture}
+ \Vertex[IdAsLabel]{A1}
+ \Vertex[x=1,label=B_1,Math]{B}
+ \Vertex[x=2,Math,IdAsLabel]{C_1}
+ \end{tikzpicture}
+\end{lstlisting}
+\end{docspec}
+
+
+\begin{docspecdef}
+ \doccmd{Vertex}[\docopt{RGB},\docopt{color}=\docarg{RGB values}]\{\docarg{Name}\}
+\end{docspecdef}
+
+In order to display RGB colors for the vertex fill color, the option \docopt{RGB} has to be entered. In combination with this option, the \docopt{color} hast to be a list with the \docarg{RGB
+values}, separated by <<,>> and within $\{~\}$.\footnote{e.g. the RGB code for white: $\{255,255,255\}$}
+
+\begin{marginfigure}[4mm]
+\centering
+ \begin{tikzpicture}
+ \Vertex[RGB,color={127,201,127}]{A}
+ \Vertex[x=1,RGB,color={190,174,212}]{B}
+ \Vertex[x=2,RGB,color={253,192,134}]{C}
+ \end{tikzpicture}
+\end{marginfigure}
+
+\begin{docspec}
+\begin{lstlisting}
+ \begin{tikzpicture}
+ \Vertex[RGB,color={127,201,127}]{A}
+ \Vertex[x=1,RGB,color={190,174,212}]{B}
+ \Vertex[x=2,RGB,color={253,192,134}]{C}
+ \end{tikzpicture}
+\end{lstlisting}
+\end{docspec}
+
+\begin{docspecdef}
+ \doccmd{Vertex}[\docopt{Pseudo}]\{\docarg{Name}\}
+\end{docspecdef}
+
+The option \docopt{Pseudo} creates a pseudo vertex, where only the vertex name and the vertex coordinate will be drawn. Edges etc, can still be assigned to this vertex.
+
+\begin{marginfigure}[32mm]
+\centering
+ \begin{tikzpicture}
+ \Vertex{A}
+ \Vertex[x=2,Pseudo]{B}
+ \end{tikzpicture}
+\end{marginfigure}
+
+\begin{docspec}
+\begin{lstlisting}
+ \begin{tikzpicture}
+ \Vertex{A}
+ \Vertex[x=2,Pseudo]{B}
+ \end{tikzpicture}
+\end{lstlisting}
+\end{docspec}
+
+
+
+\begin{docspecdef}
+ \doccmd{Vertex}[\docopt{layer}=\docarg{number}]\{\docarg{Name}\}
+\end{docspecdef}
+
+With the option \docopt{layer} the vertex can be assigned to a specific layer. More about this option and the use of layers is explained in Chapter~\ref{chap:multilayer_networks}.
+
+\newpage
+
+\section{Edge}
+\label{sec:edge}
+
+The second essential command is an \doccmddef{Edge}, which allow connecting two vertices.
+
+\begin{docspecdef}
+ \doccmd{Edge}[\docopt{local options}](\docarg{Vertex i})(\docarg{Vertex j})
+\end{docspecdef}
+
+Edges can be generated between one or two vertices. In the first case, a self-loop will be generated. As mandatory arguments the \docarg{Names} of the vertices which should be connected must be entered between $(~)$ brackets. In case of a directed edge, the order is important. An edge is created from \docarg{Vertex i} (origin) to \docarg{Vertex j} (destination).
+
+For an \doccmd{Edge} the following options are available:
+
+\begin{table}[h]\index{Edge!options}
+ \footnotesize%
+ \begin{center}
+ \begin{tabular}{lccl}
+ \toprule
+ Option & Default & Type &Definition \\
+ \midrule
+ lw & \{\} & measure & line width of the edge \\
+ color & \{\} & color & edge color\\
+ opacity & \{\} & number & opacity of the edge \\
+ bend & 0 & number & angle out/in of the vertex \\
+ label & \{\} & string & label \\
+ fontsize & \{\} & string & font size of the label\\
+ fontcolor & \{\} & color & font color of the label\\
+ fontscale & \{\} & number & scale of the label\\
+ position & \{\} & string & label position\\
+ distance & 0.5 & number & label distance from vertex i\\
+ style & \{\} & string & additional \tikzsym styles \\
+ \midrule
+ path & \{\} & list & path over several vertices\\
+ \midrule
+ loopsize & 1cm & measure & size parameter of the self-loop\\
+ loopposition& 0 & number & orientation of the self-loop \\
+ loopshape & 90 & number & loop angle out/in of the vertex \\
+ \midrule
+ Direct & false & Boolean & allow directed edges \\
+ Math & false & Boolean & displays the label in math mode \\
+ RGB & false & Boolean & allow RGB colors \\
+ NotInBG & false & Boolean & edge is not in the background layer\\
+ \bottomrule
+ \end{tabular}
+ \scriptsize
+ \end{center}
+ \caption{Local options for the \doccmd{Edge} command.}
+ \label{tab:edge_options}
+\end{table}
+
+The options \docopt{loopsize}, \docopt{loopposition}, and \docopt{loopsize} are only for self-loops available.
+
+\begin{docspecdef}
+ \doccmd{Edge}(\docarg{Vertex i})(\docarg{Vertex j})
+\end{docspecdef}
+
+An edge is created between \docarg{Vertex i} and \docarg{Vertex j}.
+
+\begin{marginfigure}[28mm]
+\centering
+ \begin{tikzpicture}
+ \Vertex{A} \Vertex[x=2]{B}
+ \Edge(A)(B)
+ \end{tikzpicture}
+\end{marginfigure}
+
+\begin{docspec}
+\begin{lstlisting}
+ \begin{tikzpicture}
+ \Vertex{A} \Vertex[x=2]{B}
+ \Edge(A)(B)
+ \end{tikzpicture}
+\end{lstlisting}
+\end{docspec}
+
+\begin{docspecdef}
+ \doccmd{Edge}[\docopt{lw}=\docarg{measure}](\docarg{Vertex i})(\docarg{Vertex j})
+\end{docspecdef}
+
+The line width of an edge can be modified with the option \docopt{lw}. Here, the unit of the \docarg{measure} has to be specified. The default value is \SI{1.5}{pt}.
+
+\newpage
+\begin{marginfigure}[6mm]
+\centering
+ \begin{tikzpicture}
+ \Vertex{A} \Vertex[x=2]{B} \Vertex[x=2,y=-1]{C}
+ \Edge[lw=3pt](A)(B)
+ \Edge[lw=5pt](A)(C)
+ \end{tikzpicture}
+\end{marginfigure}
+
+\begin{docspec}
+\begin{lstlisting}
+ \begin{tikzpicture}
+ \Vertex{A} \Vertex[x=2]{B} \Vertex[x=2,y=-1]{C}
+ \Edge[lw=3pt](A)(B)
+ \Edge[lw=5pt](A)(C)
+ \end{tikzpicture}
+\end{lstlisting}
+\end{docspec}
+
+%\newpage
+
+\begin{docspecdef}
+ \doccmd{Edge}[\docopt{color}=\docarg{color}](\docarg{Vertex i})(\docarg{Vertex j})
+\end{docspecdef}
+
+To change the line color of each edge individually, the option \docopt{color} has to be used. Without the option \docopt{RGB} set, the default \tikzsym and \LaTeX~ colors can be applied.
+
+\begin{marginfigure}[30mm]
+\centering
+ \begin{tikzpicture}
+ \Vertex{A} \Vertex[x=2]{B} \Vertex[x=2,y=-1]{C}
+ \Edge[color=red](A)(B)
+ \Edge[color=green!70!blue](A)(C)
+ \end{tikzpicture}
+\end{marginfigure}
+
+\begin{docspec}
+\begin{lstlisting}
+ \begin{tikzpicture}
+ \Vertex{A} \Vertex[x=2]{B} \Vertex[x=2,y=-1]{C}
+ \Edge[color=red](A)(B)
+ \Edge[color=green!70!blue](A)(C)
+ \end{tikzpicture}
+\end{lstlisting}
+\end{docspec}
+
+\begin{docspecdef}
+ \doccmd{Edge}[\docopt{opacity}=\docarg{number}](\docarg{Vertex i})(\docarg{Vertex j})
+\end{docspecdef}
+
+With the option \docopt{opacity} the opacity of the edge line can be modified. The range of the \docarg{number} lies between $0$ and $1$. Where $0$ represents a fully transparent fill and $1$ a solid fill.
+
+\begin{marginfigure}[30mm]
+\centering
+ \begin{tikzpicture}
+ \Vertex{A} \Vertex[x=2]{B} \Vertex[x=2,y=-1]{C}
+ \fill [orange] (.9,.2) rectangle (1.1,-.7);
+ \EdgesNotInBG
+ \Edge[opacity=.7](A)(B)
+ \Edge[opacity=.2](A)(C)
+ \end{tikzpicture}
+\end{marginfigure}
+
+\begin{docspec}
+\begin{lstlisting}
+ \begin{tikzpicture}
+ \Vertex{A} \Vertex[x=2]{B} \Vertex[x=2,y=-1]{C}
+ \Edge[opacity=.7](A)(B)
+ \Edge[opacity=.2](A)(C)
+ \end{tikzpicture}
+\end{lstlisting}
+\end{docspec}
+
+\begin{docspecdef}
+ \doccmd{Edge}[\docopt{bend}=\docarg{number}](\docarg{Vertex i})(\docarg{Vertex j})
+\end{docspecdef}
+
+The shape of the edge can be modified with the \docopt{bend} option. If nothing is specified a straight edge, between the vertices, is drawn. The \docarg{number} defines the angle in which the edge is diverging from its straight connection. A positive \docarg{number} bend the edge counter clockwise, while a negative \docarg{number} make changes clockwise.
+
+\begin{marginfigure}[32mm]
+\centering
+ \begin{tikzpicture}
+ \Vertex{A}
+ \Vertex[x=2]{B}
+ \Edge[bend=45](A)(B)
+ \Edge[bend=-70](A)(B)
+ \draw[orange,dashed](0,0) -- (20mm,0mm)(0,0)--(45:10mm);
+ \draw[orange,->] (.5,0) arc (0:45:5mm);
+ \draw[orange,dashed](0,0)--(-70:10mm);
+ \draw[orange,->] (.5,0) arc (0:-70:5mm);
+ \node[orange] (x) at (1,.25) {$45^\circ$};
+ \node[orange] (x) at (1,-.35) {$70^\circ$};
+ \draw[orange,dashed] (2,0)--++(135:10mm);
+ \draw[orange,->] (1.5,0) arc (180:135:5mm);
+ \draw[orange,dashed] (2,0)--++(-110:10mm);
+ \draw[orange,->] (1.5,0) arc (-180:-110:5mm);
+ \end{tikzpicture}
+\end{marginfigure}
+
+\begin{docspec}
+\begin{lstlisting}
+ \begin{tikzpicture}
+ \Vertex{A} \Vertex[x=2]{B}
+ \Edge[bend=45](A)(B)
+ \Edge[bend=-70](A)(B)
+ \end{tikzpicture}
+\end{lstlisting}
+\end{docspec}
+
+\begin{docspecdef}
+ \doccmd{Edge}[\docopt{label}=\docarg{string}](\docarg{Vertex i})(\docarg{Vertex j})
+\end{docspecdef}
+
+An edge is labeled with the option \docopt{label}. For the label any \docarg{string} argument can be used, including blank spaces. The environment \$ \$ can be used to display mathematical expressions.
+
+\begin{marginfigure}[30mm]
+\centering
+ \begin{tikzpicture}
+ \Vertex{A} \Vertex[x=2]{B}
+ \Edge[label=X](A)(B)
+ \end{tikzpicture}
+\end{marginfigure}
+
+\begin{docspec}
+\begin{lstlisting}
+ \begin{tikzpicture}
+ \Vertex{A} \Vertex[x=2]{B}
+ \Edge[label=X](A)(B)
+ \end{tikzpicture}
+\end{lstlisting}
+\end{docspec}
+
+\begin{docspecdef}
+ \doccmd{Edge}[\docopt{label}=\docarg{string},\docopt{fontsize}=\docarg{string}](\docarg{Vertex i})(\docarg{Vertex j})
+\end{docspecdef}
+
+The font size of the \docopt{label} can be modified with the option \docopt{fontsize}. Here common \LaTeX~ font size commands\footnote{e.g. \doccmd{tiny}, \doccmd{scriptsize}, \doccmd{footnotesize}, \doccmd{small}, \dots.} can be used to change the size of the label.
+
+\begin{marginfigure}[6mm]
+\centering
+ \begin{tikzpicture}
+ \Vertex{A} \Vertex[x=2]{B} \Vertex[x=2,y=-1]{C}
+ \Edge[label=X,fontsize=\large](A)(B)
+ \Edge[label=Y,fontsize=\tiny](A)(C)
+ \end{tikzpicture}
+\end{marginfigure}
+
+\begin{docspec}
+\begin{lstlisting}
+ \begin{tikzpicture}
+ \Vertex{A} \Vertex[x=2]{B} \Vertex[x=2,y=-1]{C}
+ \Edge[label=X,fontsize=\large](A)(B)
+ \Edge[label=Y,fontsize=\tiny](A)(C)
+ \end{tikzpicture}
+\end{lstlisting}
+\end{docspec}
+
+\begin{docspecdef}
+ \doccmd{Edge}[\docopt{label}=\docarg{string},\docopt{fontcolor}=\docarg{color}](\docarg{Vertex i})(\docarg{Vertex j})
+\end{docspecdef}
+
+The color of the \docopt{label} can be changed with the option \docopt{fontcolor}. Currently, only the default \tikzsym and \LaTeX~ colors are supported \footnote{\TODO Add RGB option!}.
+
+\begin{marginfigure}[1mm]
+\centering
+ \begin{tikzpicture}
+ \Vertex{A} \Vertex[x=2]{B} \Vertex[x=2,y=-1]{C}
+ \Edge[label=X,fontcolor=blue](A)(B)
+ \Edge[label=Y,fontcolor=red](A)(C)
+ \end{tikzpicture}
+\end{marginfigure}
+
+\begin{docspec}
+\begin{lstlisting}
+ \begin{tikzpicture}
+ \Vertex{A} \Vertex[x=2]{B} \Vertex[x=2,y=-1]{C}
+ \Edge[label=X,fontcolor=blue](A)(B)
+ \Edge[label=Y,fontcolor=red](A)(C)
+ \end{tikzpicture}
+\end{lstlisting}
+\end{docspec}
+
+
+\begin{docspecdef}
+ \doccmd{Edge}[\docopt{label}=\docarg{string},\docopt{fontscale}=\docarg{color}](\docarg{Vertex i})(\docarg{Vertex j})
+\end{docspecdef}
+
+Contrary to the option \docopt{fontsize}, the option \docopt{fontscale} does not change the font size itself but scales the curent font size up or down. The \docarg{number} defines the scale, where numbers between $0$ and $1$ down scale the font and numbers greater then $1$ up scale the label. For example $0.5$ reduces the size of the font to $50\%$ of its originial size, while $1.2$ scales the font to $120\%$.
+
+\begin{marginfigure}[30mm]
+\centering
+ \begin{tikzpicture}
+ \Vertex{A} \Vertex[x=2]{B} \Vertex[x=2,y=-1]{C}
+ \Edge[label=X,fontscale=.5](A)(B)
+ \Edge[label=Y,fontscale=1.2](A)(C)
+ \end{tikzpicture}
+\end{marginfigure}
+
+\begin{docspec}
+\begin{lstlisting}
+ \begin{tikzpicture}
+ \Vertex{A} \Vertex[x=2]{B} \Vertex[x=2,y=-1]{C}
+ \Edge[label=X,fontscale=.5](A)(B)
+ \Edge[label=Y,fontscale=2](A)(C)
+ \end{tikzpicture}
+\end{lstlisting}
+\end{docspec}
+
+\begin{docspecdef}
+ \doccmd{Edge}[\docopt{label}=\docarg{string},\docopt{position}=\docarg{string}](\docarg{Vertex i})(\docarg{Vertex j})
+\end{docspecdef}
+
+Per default the \docopt{label} is positioned in between both vertices in the center of the line. Classical \tikzsym commands\footnote{e.g. \docarg{above}, \docarg{below}, \docarg{left}, \docarg{right}, \docarg{above left}, \docarg{above right},\dots} can be used to change the \docopt{position} of the \docopt{label}.
+%\newpage
+
+\begin{marginfigure}[6mm]
+\centering
+ \begin{tikzpicture}
+ \Vertex{A} \Vertex[x=2]{B} \Vertex[x=2,y=-1]{C}
+ \Edge[label=X,position=above](A)(B)
+ \Edge[label=Y,position={below left=2mm}](A)(C)
+ \end{tikzpicture}
+\end{marginfigure}
+
+\begin{docspec}
+\begin{lstlisting}
+ \begin{tikzpicture}
+ \Vertex{A} \Vertex[x=2]{B} \Vertex[x=2,y=-1]{C}
+ \Edge[label=X,position=above](A)(B)
+ \Edge[label=Y,position={below left=2mm}](A)(C)
+ \end{tikzpicture}
+\end{lstlisting}
+\end{docspec}
+
+\begin{docspecdef}
+ \doccmd{Edge}[\docopt{label}=\docarg{string},\docopt{distance}=\docarg{number}](\docarg{Vertex i})(\docarg{Vertex j})
+\end{docspecdef}
+
+The label position between the vertices can be modified with the \docopt{distance} option. Per default the \docopt{label} is centered between both vertices. The position is expressed as the percentage of the length between the vertices, e.g. of \docopt{distance}=$0.7$, the label is placed at 70\% of the edge length away of \docarg{Vertex i}.
+
+\newpage
+\begin{marginfigure}[6mm]
+\centering
+ \begin{tikzpicture}
+ \Vertex{A} \Vertex[x=2]{B}
+ \Edge[label=X,distance=.7](A)(B)
+ \draw[orange,|->|] (.3,-.5) --++ (0.98,0) node[pos=.5,above]{$0.7$};
+ \draw[orange,|<->|] (.3,.5) --++ (1.4,0) node[pos=.5,below]{$1.0$};
+ \end{tikzpicture}
+\end{marginfigure}
+
+\begin{docspec}
+\begin{lstlisting}
+ \begin{tikzpicture}
+ \Vertex{A} \Vertex[x=2]{B}
+ \Edge[label=X,distance=.7](A)(B)
+ \end{tikzpicture}
+\end{lstlisting}
+\end{docspec}
+
+\begin{docspecdef}
+ \doccmd{Edge}[\docopt{style}=\docarg{string}](\docarg{Vertex i})(\docarg{Vertex j})
+\end{docspecdef}
+
+Any other \tikzsym style option or command can be entered via the option \docopt{style}. Most of these commands can be found in the ``\tikzsym and PGF Manual''. Contain the commands additional options (e.g.\docopt{shading}=\docarg{ball}), then the argument for the \docopt{style} has to be between $\{~\}$ brackets.
+
+\begin{marginfigure}[30mm]
+\centering
+ \begin{tikzpicture}
+ \Vertex{A} \Vertex[x=2]{B}
+ \Edge[style={dashed}](A)(B)
+ \end{tikzpicture}
+\end{marginfigure}
+
+\begin{docspec}
+\begin{lstlisting}
+ \begin{tikzpicture}
+ \Vertex{A} \Vertex[x=2]{B}
+ \Edge[style={dashed}](A)(B)
+ \end{tikzpicture}
+\end{lstlisting}
+\end{docspec}
+
+
+\begin{docspecdef}
+ \doccmd{Edge}[\docopt{path}=\docarg{list}](\docarg{Vertex i})(\docarg{Vertex j})
+\end{docspecdef}
+
+In order to draw a finite sequence of edges which connect a sequence of vertices and/or coordinates, the option \docopt{path} can be used\footnote{\TODO currently labels and bend edges are not supported!}. The argument for this option has to be a list element indicated by $\{~\}$ brackets, containing the \docarg{Names} of the intermediated vertices. New coordinates, i.e. there is no vertex located, can be insert with $\{\docopt{x},\docopt{y}\}$. Arguments of the list, have to be seperated by commas <<,>>.
+
+
+\begin{marginfigure}[18mm]
+\centering
+ \begin{tikzpicture}
+ \Vertex{A} \Vertex[x=2]{B} \Vertex[x=2,y=-1]{C}
+ \Edge[path={A,{0,-1},C,B}](A)(B)
+ \end{tikzpicture}
+\end{marginfigure}
+
+\begin{docspec}
+\begin{lstlisting}
+ \begin{tikzpicture}
+ \Vertex{A} \Vertex[x=2]{B} \Vertex[x=2,y=-1]{C}
+ \Edge[path={A,{0,-1},C,B}](A)(B)
+ \end{tikzpicture}
+\end{lstlisting}
+\end{docspec}
+
+%\newpage
+
+\begin{docspecdef}
+ \doccmd{Edge}(\docarg{Vertex i})(\docarg{Vertex i})
+\end{docspecdef}
+
+Self-loops are created by using the same vertex as origin and destination. Beside the options explained above, there are three self-loop specific options: \docopt{loopsize}, \docopt{loopposition}, and \docopt{loopshape}.
+
+\begin{marginfigure}[28mm]
+\centering
+ \begin{tikzpicture}
+ \Vertex{A}
+ \Edge(A)(A)
+ \end{tikzpicture}
+\end{marginfigure}
+
+\begin{docspec}
+\begin{lstlisting}
+ \begin{tikzpicture}
+ \Vertex{A}
+ \Edge(A)(A)
+ \end{tikzpicture}
+\end{lstlisting}
+\end{docspec}
+
+\begin{docspecdef}
+ \doccmd{Edge}[\docopt{loopsize}=\docarg{measure}](\docarg{Vertex i})(\docarg{Vertex i})
+\end{docspecdef}
+
+With the option \docopt{loopsize} the length of the edge can be modified. The \docarg{measure} value has to be insert together with its units. Per default the \docopt{loopsize} is \SI{1}{cm}.
+
+\newpage
+\begin{marginfigure}[2mm]
+\centering
+ \begin{tikzpicture}
+ \Vertex{A} \Vertex[x=1.3]{B}
+ \Edge[loopsize=.5cm](A)(A)
+ \Edge[loopsize=1.5cm](B)(B)
+ \end{tikzpicture}
+\end{marginfigure}
+
+\begin{docspec}
+\begin{lstlisting}
+ \begin{tikzpicture}
+ \Vertex{A} \Vertex[x=1.3]{B}
+ \Edge[loopsize=.5cm](A)(A)
+ \Edge[loopsize=1.5cm](B)(B)
+ \end{tikzpicture}
+\end{lstlisting}
+\end{docspec}
+
+\begin{docspecdef}
+ \doccmd{Edge}[\docopt{loopposition}=\docarg{number}](\docarg{Vertex i})(\docarg{Vertex i})
+\end{docspecdef}
+
+The position of the self-loop is defined via the rotation angle around the vertex. The origin ($0^\circ$) is the $y$ axis. A positive \docarg{number} change the \docopt{loopposition} counter clockwise, while a negative \docarg{number} make changes clockwise.
+
+\begin{marginfigure}[28mm]
+\centering
+ \begin{tikzpicture}
+ \Vertex{A}
+ \Vertex[x=1.5]{B}
+ \Edge[loopposition=45](A)(A)
+ \Edge[loopposition=-70](B)(B)
+ \draw[orange,dashed](0,0) -- (10mm,0mm)(0,0)--(45:10mm);
+ \draw[orange,->] (.5,0) arc (0:45:5mm);
+ \node[orange] (x) at (1,.35) {$45^\circ$};
+ \draw[orange,dashed](1.5,0)--++(-70:10mm);
+ \draw[orange,dashed](1.5,0)--++(10mm,0);
+ \draw[orange,->] (1.9,0) arc (0:-70:5mm);
+ \node[orange] (x) at (2.3,-.45) {$70^\circ$};
+ \end{tikzpicture}
+\end{marginfigure}
+
+\begin{docspec}
+\begin{lstlisting}
+ \begin{tikzpicture}
+ \Vertex{A} \Vertex[x=1.5]{B}
+ \Edge[loopposition=45](A)(A)
+ \Edge[loopposition=-70](B)(B)
+ \end{tikzpicture}
+\end{lstlisting}
+\end{docspec}
+
+\begin{docspecdef}
+ \doccmd{Edge}[\docopt{loopshape}=\docarg{number}](\docarg{Vertex i})(\docarg{Vertex i})
+\end{docspecdef}
+
+The shape of the self-loop is defined by the enclosing angle. The shape can be changed by decreasing or increasing the argument value of the \docopt{loopshape} option.
+
+\begin{marginfigure}[28mm]
+\centering
+ \begin{tikzpicture}
+ \Vertex{A}
+ \Edge[loopshape=45](A)(A)
+ \draw[orange,dashed](0,0) -- (-22.5:13mm)(0,0)--(22.5:13mm);
+ \draw[orange,->] (1.2,0) arc (0:22.5:12mm);
+ \draw[orange,->] (1.2,0) arc (0:-22.5:12mm);
+ \node[orange] (x) at (1.5,0) {$45^\circ$};
+ \end{tikzpicture}
+\end{marginfigure}
+
+\begin{docspec}
+\begin{lstlisting}
+ \begin{tikzpicture}
+ \Vertex{A}
+ \Edge[loopshape=45](A)(A)
+ \end{tikzpicture}
+\end{lstlisting}
+\end{docspec}
+
+%\newpage
+
+\begin{docspecdef}
+ \doccmd{Edge}[\docopt{Direct}](\docarg{Vertex i})(\docarg{Vertex j})
+\end{docspecdef}
+
+Directed edges are created by enabling the option \docopt{Direct}. The arrow is drawn from \docarg{Vertex i} to \docarg{Vertex j}.
+
+\begin{marginfigure}[28mm]
+\centering
+ \begin{tikzpicture}
+ \Vertex{A} \Vertex[x=2]{B}
+ \Edge[Direct](A)(B)
+ \end{tikzpicture}
+\end{marginfigure}
+
+\begin{docspec}
+\begin{lstlisting}
+ \begin{tikzpicture}
+ \Vertex{A} \Vertex[x=2]{B}
+ \Edge[Direct](A)(B)
+ \end{tikzpicture}
+\end{lstlisting}
+\end{docspec}
+
+
+\begin{docspecdef}
+ \doccmd{Edge}[Math, label=\docopt{string}](\docarg{Vertex i})(\docarg{Vertex j})
+\end{docspecdef}
+
+The option \docopt{Math} allows transforming labels into mathematical expressions without using the \$~\$ environment.
+
+\begin{marginfigure}[28mm]
+\centering
+ \begin{tikzpicture}
+ \Vertex{A} \Vertex[x=2]{B}
+ \Edge[Math,label=X_1](A)(B)
+ \end{tikzpicture}
+\end{marginfigure}
+
+\begin{docspec}
+\begin{lstlisting}
+ \begin{tikzpicture}
+ \Vertex{A} \Vertex[x=2]{B}
+ \Edge[Math,label=X_1](A)(B)
+ \end{tikzpicture}
+\end{lstlisting}
+\end{docspec}
+
+\begin{docspecdef}
+ \doccmd{Edge}[RBG, color=\docopt{RGB value}](\docarg{Vertex i})(\docarg{Vertex j})
+\end{docspecdef}
+
+In order to display RGB colors for the line color of the edge, the option \docopt{RGB} has to be entered. In combination with this option, the \docopt{color} hast to be a list with the \docarg{RGB
+values}, separated by <<,>> and within $\{~\}$.\footnote{e.g. the RGB code for white: $\{255,255,255\}$}
+
+\begin{marginfigure}%[28mm]
+\centering
+ \begin{tikzpicture}
+ \Vertex{A} \Vertex[x=2]{B} \Vertex[x=2,y=-1]{C}
+ \Edge[RGB,color={127,201,127}](A)(B)
+ \Edge[RGB,color={253,192,134}](A)(C)
+ \end{tikzpicture}
+\end{marginfigure}
+
+\begin{docspec}
+\begin{lstlisting}
+ \begin{tikzpicture}
+ \Vertex{A} \Vertex[x=2]{B} \Vertex[x=2,y=-1]{C}
+ \Edge[RGB,color={127,201,127}](A)(B)
+ \Edge[RGB,color={253,192,134}](A)(C)
+ \end{tikzpicture}
+\end{lstlisting}
+\end{docspec}
+
+\begin{docspecdef}
+ \doccmd{Edge}[\docopt{NotInBG}]\{\docarg{filename}\}
+\end{docspecdef}
+
+Per default, the edge is drawn on the background layer of the \docarg{tikzpicture}. I.e. objects which are created after the edges appear also on top of them. To turn this off, the option \docopt{NotInBG} has to be enabled. Changes to the default setting can be made with \doccmd{EdgesNotInBG} or \doccmd{EdgesInBG}\footnote{See Section \ref{sec:edge_style}}.
+
+\begin{marginfigure}[6mm]
+\centering
+ \begin{tikzpicture}
+ \Vertex{A} \Vertex[x=2]{B} \Vertex[x=1,y=-.5]{C}
+ \Vertex[y=-1]{D} \Vertex[x=2,y=-1]{E}
+ \Edge[bend=-30](A)(B)
+ \Edge[bend=30,NotInBG](D)(E)
+ \end{tikzpicture}
+\end{marginfigure}
+
+\begin{docspec}
+\begin{lstlisting}
+ \begin{tikzpicture}
+ \Vertex{A} \Vertex[x=2]{B} \Vertex[x=1,y=-.5]{C}
+ \Vertex[y=-1]{D} \Vertex[x=2,y=-1]{E}
+ \Edge[bend=-30](A)(B)
+ \Edge[bend=30,NotInBG](D)(E)
+ \end{tikzpicture}
+\end{lstlisting}
+\end{docspec}
+
+\newpage
+\section{Text}
+\label{sec:text}
+
+While \tikzsym offers multiple ways to label objects and create text elements, a simplified command \doccmddef{Text} is implemented, which allow placing and modifying text to the networks.
+\begin{docspecdef}
+ \doccmd{Text}[\docopt{local options}]\{\docarg{string}\}
+\end{docspecdef}
+In order to be able to create a text, a non-empty \docarg{string} argument is required. This argument is the actual text added to the figure. Mathematical symbols are entered in the same way as in a normal \LaTeX~document, i.e. between \$~\$.
+
+For a \doccmd{Text} the following options are available:
+
+\begin{table}[h]\index{Text!options}
+ \footnotesize%
+ \begin{center}
+ \begin{tabular}{lccl}
+ \toprule
+ Option & Default & Type &Definition \\
+ \midrule
+ x & 0 & measure & x-coordinate \\
+ y & 0 & measure & y-coordinate \\
+ fontsize & \{\} & fontsize & font size of the text\\
+ color & \{\} & color & color of the text\\
+ opacity & \{\} & number & opacity of the text \\
+ position & center& string & position of the text to the origin\\
+ distance & \SI{0}{cm} & measure & distance from the origin \\
+ rotation & 0 & number & rotation of the text \\
+ anchor & \{\} & string & anchor of the text \\
+ width & \{\} & number & width of the text box \\
+ style & \{\} & string & additional \tikzsym styles \\
+ layer & \{\} & number & assigned layer of the text \\
+ \midrule
+ RGB & false & Boolean & allow RGB colors \\
+ \bottomrule
+ \end{tabular}
+ \scriptsize
+ \end{center}
+ \caption{Local options for the \doccmd{Text} command.}
+ \label{tab:text_options}
+\end{table}
+
+The order how the options are entered does not matter. Changes to the default Text layout can be made with \doccmd{SetTextStyle}\footnote{see Section \ref{sec:text_style}}
+
+\begin{docspecdef}
+ \doccmd{Text}[\docopt{x}=\docarg{measure},\docopt{y}=\docarg{measure}]\{\docarg{string}\}
+\end{docspecdef}
+
+The location of the text is determined by Cartesian coordinates in \docopt{x} and \docopt{y}. The coordinates are optional. If no coordinates are determined the text will be placed at the origin ($0,0$). The entered \docarg{measures} are in default units (\si{cm}). Changing the unites (locally) can be done by adding the unit to the \docarg{measure}\footnote{e.g. x=\SI{1}{in}}. Changes to the default setting can be made with \doccmd{SetDefaultUnit}\footnote{see Section \ref{sec:gerneral_settings}}.
+
+\begin{marginfigure}[6mm]
+\centering
+ \begin{tikzpicture}
+ \Text{A}
+ \Text[x=1,y=1]{B}
+ \Text[x=2]{C}
+ \end{tikzpicture}
+\end{marginfigure}
+
+\begin{docspec}
+\begin{lstlisting}
+ \begin{tikzpicture}
+ \Text{A}
+ \Text[x=1,y=1]{B}
+ \Text[x=2]{C}
+ \end{tikzpicture}
+\end{lstlisting}
+\end{docspec}
+
+
+\begin{docspecdef}
+ \doccmd{Text}[\docopt{fontsize}=\docarg{font size}]\{\docarg{string}\}
+\end{docspecdef}
+
+The font size of the text can be changed with the option \docopt{fontsize}. Per default the font size of the text is defined as \doccmd{normalsize}.
+
+\begin{marginfigure}[34mm]
+\centering
+ \begin{tikzpicture}
+ \Text[fontsize=\small]{A}
+ \Text[x=1,fontsize=\LARGE]{B}
+ \Text[x=2,fontsize=\Huge]{C}
+ \end{tikzpicture}
+\end{marginfigure}
+
+\begin{docspec}
+\begin{lstlisting}
+ \begin{tikzpicture}
+ \Text[fontsize=\small]{A}
+ \Text[x=1,fontsize=\LARGE]{B}
+ \Text[x=2,fontsize=\Huge]{C}
+ \end{tikzpicture}
+\end{lstlisting}
+\end{docspec}
+
+\begin{docspecdef}
+ \doccmd{Text}[\docopt{color}=\docarg{color}]\{\docarg{string}\}
+\end{docspecdef}
+
+To change the text color individually, the option \docopt{color} has to be used. Without the option \docopt{RGB} set, the default \tikzsym and \LaTeX~ colors can be applied.
+
+\begin{marginfigure}[34mm]
+\centering
+ \begin{tikzpicture}
+ \Text[color = blue]{A}
+ \Text[x=1,color=red]{B}
+ \Text[x=2,color=green!70!blue]{C}
+ \end{tikzpicture}
+\end{marginfigure}
+
+\begin{docspec}
+\begin{lstlisting}
+ \begin{tikzpicture}
+ \Text[color = blue]{A}
+ \Text[x=1,color=red]{B}
+ \Text[x=2,color=green!70!blue]{C}
+ \end{tikzpicture}
+\end{lstlisting}
+\end{docspec}
+
+
+\begin{docspecdef}
+ \doccmd{Text}[\docopt{opacity}=\docarg{number}]\{\docarg{string}\}
+\end{docspecdef}
+
+With the option \docopt{opacity} the opacity of the text can be modified. The range of the \docarg{number} lies between $0$ and $1$. Where $0$ represents a fully transparent text and $1$ a solid text.
+
+\begin{marginfigure}[34mm]
+\centering
+ \begin{tikzpicture}
+ \draw[thick,orange,dashed] (-.5,0) -- (2.5,0);
+ \Text[opacity = 1]{A}
+ \Text[x=1,opacity =.7]{B}
+ \Text[x=2,opacity =.2]{C}
+ \end{tikzpicture}
+\end{marginfigure}
+
+\begin{docspec}
+\begin{lstlisting}
+ \begin{tikzpicture}
+ \Text[opacity = 1]{A}
+ \Text[x=1,opacity =.7]{B}
+ \Text[x=2,opacity =.2]{C}
+ \end{tikzpicture}
+\end{lstlisting}
+\end{docspec}
+
+
+
+\begin{docspecdef}
+ \doccmd{Text}[\docopt{position}=\docarg{string},\docopt{distance}=\docarg{measure}]\{\docarg{string}\}
+\end{docspecdef}
+
+Per default the \docopt{position} of the text is in the \docarg{center} of the origin. Classical \tikzsym commands\footnote{e.g. \docarg{above}, \docarg{below}, \docarg{left}, \docarg{right}, \docarg{above left}, \docarg{above right},\dots} can be used to change the \docopt{position} of the text.
+
+With the option, \docopt{distance} the distance between the text and the origin can be changed.
+
+\begin{marginfigure}[20mm]
+\centering
+ \begin{tikzpicture}
+ \filldraw [orange] (0,0) circle (2pt);
+ \draw[<-,orange] (0.1,0) --++ (0.5,0) node [pos=1,right]{origin ($0,0$)};
+ \Text[position=above]{above}
+ \Text[position=below]{below}
+ \Text[position=left,distance=5mm]{left}
+ \Text[position=above right,distance=5mm]{above right}
+ \end{tikzpicture}
+\end{marginfigure}
+
+\begin{docspec}
+\begin{lstlisting}
+ \begin{tikzpicture}
+ \Text[position=above]{above}
+ \Text[position=below]{below}
+ \Text[position=left,distance=5mm]{left}
+ \Text[position=above right,distance=5mm]{above right}
+ \end{tikzpicture}
+\end{lstlisting}
+\end{docspec}
+
+
+\begin{docspecdef}
+ \doccmd{Text}[\docopt{rotation}=\docarg{number}]\{\docarg{string}\}
+\end{docspecdef}
+
+With the \docopt{rotation}, the text can be rotated by entering a \docarg{number} between $-360$ and $360$. The origin ($0^\circ$) is the $y$ axis. A positive \docarg{number} change the \docopt{position} counter clockwise, while a negative \docarg{number} make changes clockwise.
+
+\begin{marginfigure}[31mm]
+\centering
+ \begin{tikzpicture}
+ \Text[rotation = 30]{A}
+ \Text[x=1,rotation = 45]{B}
+ \Text[x=2,rotation = 75]{C}
+ \draw[orange,dashed](2,0) --++ (7mm,0mm)(2,0)--++(75:7mm);
+ \draw[orange,->] (2.5,0) arc (0:75:5mm);
+ \node[orange] (x) at (2.6,-.2) {$75^\circ$};
+ \end{tikzpicture}
+\end{marginfigure}
+
+\begin{docspec}
+\begin{lstlisting}
+ \begin{tikzpicture}
+ \Text[rotation=30]{A}
+ \Text[x=1,rotation=45]{B}
+ \Text[x=2,rotation=75]{C}
+ \end{tikzpicture}
+\end{lstlisting}
+\end{docspec}
+\newpage
+
+\begin{docspecdef}
+ \doccmd{Text}[\docopt{anchor}=\docarg{string}]\{\docarg{string}\}
+\end{docspecdef}
+
+With the option \docopt{anchor} the alignment of the text can be changed. Per default the text will be aligned centered. Classical \tikzsym commands\footnote{e.g. \docarg{north}, \docarg{east}, \docarg{south}, \docarg{west}, \docarg{north east}, \docarg{north west},\dots} can be used to change the alignment of the text.
+
+\begin{marginfigure}[5mm]
+\centering
+ \begin{tikzpicture}
+ \filldraw [orange] (0,0) circle (2pt);
+ \filldraw [orange] (1,0) circle (2pt);
+ \filldraw [orange] (2,0) circle (2pt);
+ \Text[anchor=north east]{NE}
+ \Text[x=1,anchor = south]{S}
+ \Text[x=2,anchor =south west]{SW}
+ \end{tikzpicture}
+\end{marginfigure}
+
+\begin{docspec}
+\begin{lstlisting}
+ \begin{tikzpicture}
+ \Text[anchor=north east]{NE}
+ \Text[x=1,anchor = south]{S}
+ \Text[x=2,anchor =south west]{SW}
+ \end{tikzpicture}
+\end{lstlisting}
+\end{docspec}
+
+
+\begin{docspecdef}
+ \doccmd{Text}[\docopt{width}=\docarg{measure}]\{\docarg{string}\}
+\end{docspecdef}
+
+With the option \docopt{width} enabled, the text will break after the entered \docarg{measure}.
+
+\begin{marginfigure}[25mm]
+\centering
+ \begin{tikzpicture}
+ \draw[|<->|,orange] (-1.25,.7) --++ (2.5,0) node [pos=.5,above]{2.5cm};
+ \Text[width=2.5cm]{This might be a very long text.}
+ \end{tikzpicture}
+\end{marginfigure}
+
+\begin{docspec}
+\begin{lstlisting}
+ \begin{tikzpicture}
+ \Text[width=2.5cm]{This might be a very long text.}
+ \end{tikzpicture}
+\end{lstlisting}
+\end{docspec}
+
+\begin{docspecdef}
+ \doccmd{Text}[\docopt{style}=\{\docarg{string}\}]\{\docarg{string}\}
+\end{docspecdef}
+
+Any other \tikzsym style option or command can be entered via the option \docopt{style}. Most of these commands can be found in the ``\tikzsym and PGF Manual''. Contain the commands additional options (e.g.\docopt{fill}=\docarg{red}), then the argument for the \docopt{style} has to be between $\{~\}$ brackets.
+
+\begin{marginfigure}[32mm]
+\centering
+ \begin{tikzpicture}
+ \Text[style={draw,rectangle}]{A}
+ \Text[x=1,style={fill=red}]{B}
+ \Text[x=2,style={fill=blue,circle,opacity=.3}]{C}
+ \end{tikzpicture}
+\end{marginfigure}
+
+\begin{docspec}
+\begin{lstlisting}
+ \begin{tikzpicture}
+ \Text[style={draw,rectangle}]{A}
+ \Text[x=1,style={fill=red}]{B}
+ \Text[x=2,style={fill=blue,circle,opacity=.3}]{C}
+ \end{tikzpicture}
+\end{lstlisting}
+\end{docspec}
+
+\begin{docspecdef}
+ \doccmd{Text}[\docopt{RGB},\docopt{color}=\docarg{RGB values}]\{\docarg{string}\}
+\end{docspecdef}
+
+In order to display RGB colors for the text color, the option \docopt{RGB} has to be entered. In combination with this option, the \docopt{color} hast to be a list with the \docarg{RGB values}, separated by <<,>> and within $\{~\}$.\footnote{e.g. the RGB code for white: $\{255,255,255\}$}
+
+\begin{marginfigure}[7mm]
+\centering
+ \begin{tikzpicture}
+ \Text[RGB,color={127,201,127}]{A}
+ \Text[x=1,RGB,color={190,174,212}]{B}
+ \Text[x=2,RGB,color={253,192,134}]{C}
+ \end{tikzpicture}
+\end{marginfigure}
+
+\begin{docspec}
+\begin{lstlisting}
+ \begin{tikzpicture}
+ \Text[RGB,color={127,201,127}]{A}
+ \Text[x=1,RGB,color={190,174,212}]{B}
+ \Text[x=2,RGB,color={253,192,134}]{C}
+ \end{tikzpicture}
+\end{lstlisting}
+\end{docspec}
+
+\begin{docspecdef}
+ \doccmd{layer}[\docopt{layer}=\docarg{number}]\{\docarg{string}\}
+\end{docspecdef}
+
+With the option \docopt{layer} the text can be assigned to a specific layer. More about this option and the use of layers is explained in Chapter~\ref{chap:multilayer_networks}.
+
+\chapter{Complex Networks}
+\label{chap:complex_networks}
+
+While in Chapter~\ref{chap:simple_networks} the building blocks of the networks are introduced, here the main strength of the \pkg package is explained. This includes creating networks based on data, obtained from other sources (e.g. Python, R, GIS). The idea is that the layout will be done by this external sources and \pkg is used make some changes and to recreate the networks in \LaTeX.
+
+\section{Vertices}
+\label{sec:vertices}
+
+The \doccmddef{Vertices} command is the extension of the \doccmd{Vertex} command. Instead of a single vertex, a set of vertices will be drawn. This set of vertices is defined in an external file but can be modified with \doccmd{Vertices}.
+\begin{docspecdef}
+ \doccmd{Vertices}[\docopt{global options}]\{\docarg{filename}\}
+\end{docspecdef}
+
+The vertices have to be stored in a clear text file\footnote{e.g. .txt, .tex, .csv, .dat, \dots}, preferentially in a \texttt{.csv} format. The first row should contain the headings, which are equal to the options defined in Table \ref{tab:vertex_options}. Option are separated by a comma <<,>>. Each new row is corresponds to a new vertex.
+\marginnote[8mm]{File: vertices.csv}
+\begin{docspec}
+\begin{lstlisting}
+id, x, y ,size,color ,opacity,label,IdAsLabel,NoLabel
+ A, 0, 0, .4 ,green , .9 , a , false , false
+ B, 1, .7, .6 , , .5 , b , false , false
+ C, 2, 1, .8 ,orange, .3 , c , false , true
+ D, 2, 0, .5 ,red , .7 , d , true , false
+ E,.2,1.5, .5 ,gray , , e , false , false
+\end{lstlisting}
+\end{docspec}
+
+Only the \docopt{id} value is mandatory for a vertex and corresponds to the \docarg{Name} argument of a single \doccmd{Vertex}. Therefore, the same rules and naming conventions apply as for the \docarg{Name} argument: no mathematical expressions, no blank spaces, and the \docopt{id} must be unique! All other options are optional. No specific order of the options must be maintained. If no value is entered for an option, the default value will be chosen\footnote{\TODO This is NOT valid for Boolean options, here values for all vertices have to be entered.}. The \docarg{filename} should not contain blank spaces or special characters. The vertices are drawn by the command \doccmd{Vertex} with the \docarg{filename} plus file format (e.g. \texttt{.csv}). If the vertices file is not in the same directory as the main \LaTeX~file, also the path has to be specified.
+
+\newpage
+\begin{marginfigure}[2mm]
+\centering
+ \begin{tikzpicture}
+ \Vertices{data/vertices.csv}
+ \end{tikzpicture}
+\end{marginfigure}
+
+\begin{docspec}
+\begin{lstlisting}
+ \begin{tikzpicture}
+ \Vertices{data/vertices.csv}
+ \end{tikzpicture}
+\end{lstlisting}
+\end{docspec}
+
+Predefined \doccmd{Vertex} options can be overruled by the \docopt{global options} of the \doccmd{Vertices} command; I.e. these options apply for all vertices in the file. For the \doccmd{Vertices} the following options are available:
+
+\begin{table}[h]\index{Vertices!options}
+ \footnotesize%
+ \begin{center}
+ \begin{tabular}{lccl}
+ \toprule
+ Option & Default & Type &Definition \\
+ \midrule
+ size & \{\} & measure& diameter of the circles\\
+ color & \{\} & color & fillcolor of vertices\\
+ opacity & \{\} & number & opacity of the fill color \\
+ style & \{\} & string & additional \tikzsym styles \\
+ layer & \{\} & number & assigned layer of the vertices \\
+ \midrule
+ NoLabel & false & Boolean & delete the labels \\
+ IdAsLabel & false & Boolean & uses the \docarg{Names} as labels \\
+ Math & false & Boolean & displays the labels in math mode \\
+ RGB & false & Boolean & allow RGB colors \\
+ Pseudo & false & Boolean & create a pseudo vertices\\
+ \bottomrule
+ \end{tabular}
+ \scriptsize
+ \end{center}
+ \caption{Global options for the \doccmd{Vertices} command.}
+ \label{tab:vertices_options}
+\end{table}
+
+The use of these options are similar to the options for a single \doccmd{Vertex} defined in Section~\ref{sec:vertex}.
+
+\begin{docspecdef}
+ \doccmd{Vertices}[\docopt{size}=\docarg{measure}]\{\docarg{filename}\}
+\end{docspecdef}
+
+The diameter of the vertices can be changed with the option \docopt{size}. Per default a vertex has \SI{0.6}{cm} in diameter. Also, here the default units are \si{cm} and have not to be added to the \docarg{measure}.
+
+\begin{marginfigure}[28mm]
+\centering
+ \begin{tikzpicture}
+ \Vertices[size=.6]{data/vertices.csv}
+ \end{tikzpicture}
+\end{marginfigure}
+
+\begin{docspec}
+\begin{lstlisting}
+ \begin{tikzpicture}
+ \Vertices[size=.6]{data/vertices.csv}
+ \end{tikzpicture}
+\end{lstlisting}
+\end{docspec}
+
+\begin{docspecdef}
+ \doccmd{Vertices}[\docopt{color}=\docarg{color}]\{\docarg{filename}\}
+\end{docspecdef}
+
+To change the fill color for all vertices, the option \docopt{color} has to be used. Without the option \docopt{RGB} set, the default \tikzsym and \LaTeX~ colors can be applied.
+
+\begin{marginfigure}[22mm]
+\centering
+ \begin{tikzpicture}
+ \Vertices[color=green!70!blue]{data/vertices.csv}
+ \end{tikzpicture}
+\end{marginfigure}
+
+\begin{docspec}
+\begin{lstlisting}
+ \begin{tikzpicture}
+ \Vertices[color=green!70!blue]{data/vertices.csv}
+ \end{tikzpicture}
+\end{lstlisting}
+\end{docspec}
+
+\begin{docspecdef}
+ \doccmd{Vertices}[\docopt{opacity}=\docarg{number}]\{\docarg{filename}\}
+\end{docspecdef}
+
+With the option \docopt{opacity} the opacity of all vertices fills colors can be modified. The range of the \docarg{number} lies between $0$ and $1$. Where $0$ represents a fully transparent fill and $1$ a solid fill.
+
+\newpage
+\begin{marginfigure}[2mm]
+\centering
+ \begin{tikzpicture}
+ \Vertices[opacity=.3]{data/vertices.csv}
+ \end{tikzpicture}
+\end{marginfigure}
+
+\begin{docspec}
+\begin{lstlisting}
+ \begin{tikzpicture}
+ \Vertices[opacity=.3]{data/vertices.csv}
+ \end{tikzpicture}
+\end{lstlisting}
+\end{docspec}
+
+
+\begin{docspecdef}
+ \doccmd{Vertices}[\docopt{style}=\docarg{string}]\{\docarg{filename}\}
+\end{docspecdef}
+
+Any other \tikzsym style option or command can be entered via the option \docopt{style}. Most of these commands can be found in the ``\tikzsym and PGF Manual''. Contain the commands additional options (e.g.\docopt{shading}=\docarg{ball}), then the argument for the \docopt{style} has to be between $\{~\}$ brackets.
+
+\begin{marginfigure}[25mm]
+\centering
+ \begin{tikzpicture}
+ \Vertices[style={shading=ball,blue}]{data/vertices.csv}
+ \end{tikzpicture}
+\end{marginfigure}
+
+\begin{docspec}
+\begin{lstlisting}
+ \begin{tikzpicture}
+ \Vertices[style={shading=ball,blue}]{data/vertices.csv}
+ \end{tikzpicture}
+\end{lstlisting}
+\end{docspec}
+
+
+\begin{docspecdef}
+ \doccmd{Vertices}[\docopt{IdAsLabel}]\{\docarg{filename}\}
+\end{docspecdef}
+\begin{docspecdef}
+ \doccmd{Vertices}[\docopt{NoLabel}]\{\docarg{filename}\}
+\end{docspecdef}
+
+\docopt{IdAsLabel} is a Boolean option which assigns the \docopt{id} of the single vertices as labels. On the contrary, \docopt{NoLabel} suppress all labels.
+
+\begin{marginfigure}[22mm]
+\centering
+ \begin{tikzpicture}
+ \Vertices[IdAsLabel]{data/vertices.csv}
+ \node at (2,1)[font=\scriptsize]{C};
+ \end{tikzpicture}
+\end{marginfigure}
+
+\begin{docspec}
+\begin{lstlisting}
+ \begin{tikzpicture}
+ \Vertices[IdAsLabel]{data/vertices.csv}
+ \end{tikzpicture}
+\end{lstlisting}
+\end{docspec}
+
+\begin{marginfigure}[2mm]
+\centering
+ \begin{tikzpicture}
+ \Vertices[NoLabel]{data/vertices.csv}
+ \end{tikzpicture}
+\end{marginfigure}
+
+\begin{docspec}
+\begin{lstlisting}
+ \begin{tikzpicture}
+ \Vertices[NoLabel]{data/vertices.csv}
+ \end{tikzpicture}
+\end{lstlisting}
+\end{docspec}
+
+
+\begin{docspecdef}
+ \doccmd{Vertices}[\docopt{RGB}]\{\docarg{filename}\}
+\end{docspecdef}
+
+In order to display RGB colors for the vertex fill colors, the option \docopt{RGB} has to be entered. Additionally, the RGB values have to be specified in the file where the vertices are stored. Each value has its own column with the caption \docopt{R}, \docopt{G}, and \docopt{B}.
+
+\marginnote[8mm]{File: vertices\_RGB.csv}
+\begin{docspec}
+\begin{lstlisting}
+id, x, y ,size, color,opacity,label, R , G , B
+ A, 0, 0, .4 , green, .9 , a ,255, 0, 0
+ B, 1, .7, .6 , , .5 , b , 0,255, 0
+ C, 2, 1, .8 ,orange, .3 , c , 0, 0,255
+ D, 2, 0, .5 , red, .7 , d , 10,120,255
+ E,.2,1.5, .5 , gray, , e , 76, 55,255
+\end{lstlisting}
+\end{docspec}
+
+The ``normal'' color definition can also be part of the vertex definition. If the option \docopt{RGB} is not set, then the colors under \docopt{color} are applied.
+
+\newpage
+\begin{marginfigure}[3mm]
+\centering
+ \begin{tikzpicture}
+ \Vertices[RGB]{data/vertices_RGB.csv}
+ \end{tikzpicture}
+\end{marginfigure}
+
+\begin{docspec}
+\begin{lstlisting}
+ \begin{tikzpicture}
+ \Vertices[RGB]{data/vertices_RGB.csv}
+ \end{tikzpicture}
+\end{lstlisting}
+\end{docspec}
+
+
+\begin{docspecdef}
+ \doccmd{Vertices}[\docopt{Pseudo}]\{\docarg{filename}\}
+\end{docspecdef}
+
+The option \docopt{Pseudo} creates a pseudo vertices, where only the names and the coordinates of the vertices wil be drawn. Edges etc, can still be assigned to these vertices.
+
+\begin{docspecdef}
+ \doccmd{Vertices}[\docopt{layer}=\docarg{number}]\{\docarg{filename}\}
+\end{docspecdef}
+
+With the option \docopt{layer}, only the vertices on the selected layer are plotted. More about this option and the use of layers is explained in Chapter~\ref{chap:multilayer_networks}.
+
+\newpage
+\section{Edges}
+\label{sec:edges}
+
+The \doccmddef{Edges} command is the extension of the \doccmd{Edge} command. Instead of a single edge, a set of edges will be drawn. This set of edges is defined in an external file but can be modified with \doccmd{Edges}.
+\begin{docspecdef}
+ \doccmd{Edges}[\docopt{global options}]\{\docarg{filename}\}
+\end{docspecdef}
+
+Like the vertices, the edges have to be stored in a clear text file\footnote{e.g. .txt, .tex, .csv, .dat, \dots}, preferentially in a \texttt{.csv} format. The first row should contain the headings, which are equal to the options defined in Table \ref{tab:edge_options}. Option are separated by a comma <<,>>. Each new row is corresponds to a new edge.
+
+\marginnote[8mm]{File: edges.csv}
+\begin{docspec}
+\begin{lstlisting}
+u,v,label,lw,color ,opacity,bend, R , G , B ,Direct
+A,B, ab ,.5,red , 1 , 30, 0,120,255,false
+B,C, bc ,.7,blue , 1 , -60, 76, 55,255,false
+B,D, bd ,.5,blue , .5 , -60, 76, 55,255,false
+A,E, ae , 1,green , 1 , 75,255, 0, 0,true
+C,E, ce , 2,orange, 1 , 0,150,150,150,false
+A,A, aa ,.3,black , .5 , 75,255, 0 ,0,false
+\end{lstlisting}
+\end{docspec}
+
+The mandatory values are the \docopt{u} and \docopt{v} argument, which corresponds to the \docarg{Vertex i} and \docarg{Vertex j} arguments of a single \doccmd{Edge}. Edges can only create if a vertex exists with the same \docarg{Name}. All other options are optional. No specific order of the options must be maintained. If no value is entered for an option, the default value will be chosen\footnote{\TODO This is NOT valid for Boolean options, here values for all vertices have to be entered.}. The \docarg{filename} should not contain blank spaces or special characters. The edges are drawn by the command \doccmd{Edges} with the \docarg{filename} plus file format (e.g. \texttt{.csv}). If the edges file is not in the same directory as the main \LaTeX~file, also the path has to be specified. In order to draw edges, first, the vertices have to be generated. Only then, edges can be assigned.
+
+\begin{marginfigure}[18mm]
+\centering
+ \begin{tikzpicture}
+ \Vertices{data/vertices.csv}
+ \Edges{data/edges.csv}
+ \end{tikzpicture}
+\end{marginfigure}
+
+\begin{docspec}
+\begin{lstlisting}
+ \begin{tikzpicture}
+ \Vertices{data/vertices.csv}
+ \Edges{data/edges.csv}
+ \end{tikzpicture}
+\end{lstlisting}
+\end{docspec}
+
+Predefined \doccmd{Edge} options can be overruled by the \docopt{global options} of the \doccmd{Edges} command; I.e. these options apply for all edges in the file. For the \doccmd{Edges} the following options are available:
+
+\newpage
+\begin{table}[h]\index{Edges!options}
+ \footnotesize%
+ \begin{center}
+ \begin{tabular}{lccl}
+ \toprule
+ Option & Default & Type &Definition \\
+ \midrule
+ lw & \{\} & measure & line width of the edge \\
+ color & \{\} & color & edge color\\
+ opacity & \{\} & number & opacity of the edge \\
+ style & \{\} & string & additional \tikzsym styles \\
+ vertices & \{\} & file & vertices were the edges are assigned to\\
+ layer & \{\} & number & edges in specific layers \\
+ \midrule
+ Direct & false & Boolean & allow directed edges \\
+ Math & false & Boolean & displays the labels in math mode \\
+ NoLabel & false & Boolean & delete the labels\\
+ RGB & false & Boolean & allow RGB colors \\
+ NotInBG & false & Boolean & edges are not in the background layer\\
+ \bottomrule
+ \end{tabular}
+ \scriptsize
+ \end{center}
+ \caption{Global options for the \doccmd{Edges} command.}
+ \label{tab:edges_options}
+\end{table}
+
+The use of these options are similar to the options for a single \doccmd{Edge} defined in Section~\ref{sec:edge}.
+
+\begin{docspecdef}
+ \doccmd{Edges}[\docopt{lw}=\docarg{measure}]\{\docarg{filename}\}
+\end{docspecdef}
+
+The line width of the edges can be modified with the option \docopt{lw}. Here, the unit of the \docarg{measure} can be specified, otherwise, it is in \si{pt}.
+
+\begin{marginfigure}[35mm]
+\centering
+ \begin{tikzpicture}
+ \Vertices{data/vertices.csv}
+ \Edges[lw=2.5]{data/edges.csv}
+ \end{tikzpicture}
+\end{marginfigure}
+
+\begin{docspec}
+\begin{lstlisting}
+ \begin{tikzpicture}
+ \Vertices{data/vertices.csv}
+ \Edges[lw=2.5]{data/edges.csv}
+ \end{tikzpicture}
+\end{lstlisting}
+\end{docspec}
+
+\begin{docspecdef}
+ \doccmd{Edges}[\docopt{color}=\docarg{color}]\{\docarg{filename}\}
+\end{docspecdef}
+
+To change the line color of all edges, the option \docopt{color} has to be used. Without the option \docopt{RGB} set, the default \tikzsym and \LaTeX~ colors can be applied.
+
+\begin{marginfigure}[20mm]
+\centering
+ \begin{tikzpicture}
+ \Vertices{data/vertices.csv}
+ \Edges[color=green!70!blue]{data/edges.csv}
+ \end{tikzpicture}
+\end{marginfigure}
+
+\begin{docspec}
+\begin{lstlisting}
+ \begin{tikzpicture}
+ \Vertices{data/vertices.csv}
+ \Edges[color=green!70!blue]{data/edges.csv}
+ \end{tikzpicture}
+\end{lstlisting}
+\end{docspec}
+
+\begin{docspecdef}
+ \doccmd{Edges}[\docopt{opacity}=\docarg{number}]\{\docarg{filename}\}
+\end{docspecdef}
+
+With the option \docopt{opacity} the opacity of all edge lines can be modified. The range of the \docarg{number} lies between $0$ and $1$. Where $0$ represents a fully transparent fill and $1$ a solid fill.
+
+\begin{marginfigure}[20mm]
+\centering
+ \begin{tikzpicture}
+ \Vertices{data/vertices.csv}
+ \Edges[opacity=0.3]{data/edges.csv}
+ \end{tikzpicture}
+\end{marginfigure}
+
+\begin{docspec}
+\begin{lstlisting}
+ \begin{tikzpicture}
+ \Vertices{data/vertices.csv}
+ \Edges[opacity=0.3]{data/edges.csv}
+ \end{tikzpicture}
+\end{lstlisting}
+\end{docspec}
+
+\newpage
+\begin{docspecdef}
+ \doccmd{Edges}[\docopt{style}=\docarg{string}]\{\docarg{filename}\}
+\end{docspecdef}
+
+Any other \tikzsym style option or command can be entered via the option \docopt{style}. Most of these commands can be found in the ``\tikzsym and PGF Manual''.
+
+\begin{marginfigure}[25mm]
+\centering
+ \begin{tikzpicture}
+ \Vertices{data/vertices.csv}
+ \Edges[style={dashed}]{data/edges.csv}
+ \end{tikzpicture}
+\end{marginfigure}
+
+\begin{docspec}
+\begin{lstlisting}
+ \begin{tikzpicture}
+ \Vertices{data/vertices.csv}
+ \Edges[style={dashed}]{data/edges.csv}
+ \end{tikzpicture}
+\end{lstlisting}
+\end{docspec}
+
+
+\begin{docspecdef}
+ \doccmd{Edges}[\docopt{Direct}]\{\docarg{filename}\}
+\end{docspecdef}
+
+Directed edges are created by enabling the option \docopt{Direct}. The arrow is drawn from \docopt{u} to \docopt{v}.
+
+\begin{marginfigure}[15mm]
+\centering
+ \begin{tikzpicture}
+ \Vertices{data/vertices.csv}
+ \Edges[Direct]{data/edges.csv}
+ \end{tikzpicture}
+\end{marginfigure}
+
+\begin{docspec}
+\begin{lstlisting}
+ \begin{tikzpicture}
+ \Vertices{data/vertices.csv}
+ \Edges[Direct]{data/edges.csv}
+ \end{tikzpicture}
+\end{lstlisting}
+\end{docspec}
+
+\begin{docspecdef}
+ \doccmd{Edges}[Math]\{\docarg{filename}\}
+\end{docspecdef}
+
+The option \docopt{Math} allows transforming labels into mathematical expressions without using the \$~\$ environment.
+
+\begin{docspecdef}
+ \doccmd{Edges}[\docopt{NoLabel}]\{\docarg{filename}\}
+\end{docspecdef}
+
+The option \docopt{NoLabel} suppress all edge labels.
+
+\begin{marginfigure}[30mm]
+\centering
+ \begin{tikzpicture}
+ \Vertices{data/vertices.csv}
+ \Edges[NoLabel]{data/edges.csv}
+ \end{tikzpicture}
+\end{marginfigure}
+
+\begin{docspec}
+\begin{lstlisting}
+ \begin{tikzpicture}
+ \Vertices{data/vertices.csv}
+ \Edges[NoLabel]{data/edges.csv}
+ \end{tikzpicture}
+\end{lstlisting}
+\end{docspec}
+
+\begin{docspecdef}
+ \doccmd{Edges}[\docopt{RGB}]\{\docarg{filename}\}
+\end{docspecdef}
+
+In order to display RGB colors for the edge line colors, the option \docopt{RGB} has to be entered. Additionally, the RGB values have to be specified in the file where the vertices are stored. Each value has its own column with the caption \docopt{R}, \docopt{G}, and \docopt{B}. The ``normal'' color definition can also be part of the vertex definition. If the option \docopt{RGB} is not set, then the colors under \docopt{color} are applied.
+
+\begin{marginfigure}[34mm]
+\centering
+ \begin{tikzpicture}
+ \Vertices{data/vertices.csv}
+ \Edges[RGB]{data/edges.csv}
+ \end{tikzpicture}
+\end{marginfigure}
+
+\begin{docspec}
+\begin{lstlisting}
+ \begin{tikzpicture}
+ \Vertices{data/vertices.csv}
+ \Edges[RGB]{data/edges.csv}
+ \end{tikzpicture}
+\end{lstlisting}
+\end{docspec}
+
+
+\begin{docspecdef}
+ \doccmd{Edges}[\docopt{NotInBG}]\{\docarg{filename}\}
+\end{docspecdef}
+
+Per default, the edges are drawn on the background layer of the \docarg{tikzpicture}. I.e. objects which are created after the edges appear also on top of them. To turn this off, the option \docopt{NotInBG} has to be enabled.
+
+\begin{docspecdef}
+ \doccmd{Edges}[\docopt{vertices}=\docarg{filename}]\{\docarg{filename}\}
+\end{docspecdef}
+
+Edges can be assigned to a specific set of \doccmd{Vertices} with the option \docopt{vertices}. Thereby the argument \docarg{filename} is the same as used for the \doccmd{Vertices} command. This option might be necessary if multiple \doccmd{Vertices} are created and edges are assigned at the end.
+
+\begin{docspecdef}
+ \doccmd{Edges}[\docopt{layer}=\{\docarg{{layer $\alpha$}},\docarg{{layer $\beta$}}\}]\{\docarg{filename}\}
+\end{docspecdef}
+
+With the option \docopt{layer} only the edges between layer $\alpha$ and $\beta$ are plotted. The argument is a tuple of both layers indicated by $\{~,~\}$. More about this option and the use of layers is explained in Chapter~\ref{chap:multilayer_networks}.
+
+
+
+\chapter{Multilayer Networks}
+\label{chap:multilayer_networks}
+
+One of the main purposes of the \pkg package is the illustration of multilayer network structures. Thereby, all the previous commands can be used. A multilayer network is represented as a three-dimensional object, where each layer is located at a different $z$ plane. In order to enable this functionality, the option \docopt{multilayer} has to be used at the beginning of the \docenvdef{tikzpicture}.
+
+\section{Simple Networks}
+\label{sec:simple_networks}
+
+
+\begin{docspecdef}
+ \doccmd{Vertex}[\docopt{layer}=\docarg{number}]\{\docarg{Name}\}
+\end{docspecdef}
+
+With the option \docopt{layer} the vertex can be assigned to a specific layer. Layers are defined by numbers (e.g. $1$, $2$, $3$,\dots). Working with the \docopt{multilayer} option, each \doccmd{Vertex} has to be assigned to a specific layer. For the edge assignment no additional information is needed.
+
+\begin{marginfigure}[45mm]
+\centering
+ \begin{tikzpicture}[multilayer]
+ \begin{Layer}[layer=2]
+ \draw[orange,very thick] (0,0) rectangle (2.5,1);
+ \draw[step=.5, orange,draw opacity=.5] (0,0) grid (2.5,1);
+ \end{Layer}
+ \Vertex[x=.5,y=.5,IdAsLabel,layer=1]{A}
+ \Vertex[x=1.5,y=.5,IdAsLabel,layer=1]{B}
+ \Vertex[x=1.5,y=.5,IdAsLabel,layer=2]{C}
+ \Edge[bend=60](A)(B)
+ \Edge(C)(C)
+ \Edge[style=dashed](B)(C)
+ \end{tikzpicture}
+\end{marginfigure}
+
+\begin{docspec}
+\begin{lstlisting}
+ \begin{tikzpicture}[multilayer]
+ \Vertex[x=0.5,IdAsLabel,layer=1]{A}
+ \Vertex[x=1.5,IdAsLabel,layer=1]{B}
+ \Vertex[x=1.5,IdAsLabel,layer=2]{C}
+ \Edge[bend=60](A)(B)
+ \Edge[style=dashed](B)(C)
+ \Edge(C)(C)
+ \end{tikzpicture}
+\end{lstlisting}
+\end{docspec}
+
+Enabling the option \docopt{multilayer}, returns the network in a two-dimensional plane, like the networks discussed before. Setting the argument \docopt{multilayer}=\docarg{3d}, the network is rendered in a three-dimensional representation. Per default, the layer with the lowest number is on the top. This and the spacing between the layers can be changed with the command \doccmd{SetLayerDistance}.
+
+\begin{marginfigure}[45mm]
+\centering
+ \begin{tikzpicture}[multilayer=3d]
+ \SetLayerDistance{-1.5}
+ \begin{Layer}[layer=1]
+ \draw[orange,very thick] (0,0) rectangle (2.5,1);
+ \draw[step=.5, orange,draw opacity=.5] (0,0) grid (2.5,1);
+ \node at (0,0)[below right,orange]{Layer 1};
+ \end{Layer}
+ \begin{Layer}[layer=2]
+ \draw[orange,very thick] (0,0) rectangle (2.5,1);
+ \draw[step=.5, orange,draw opacity=.5] (0,0) grid (2.5,1);
+ \node at (0,0)[below right,orange]{Layer 2};
+ \end{Layer}
+ \Vertex[x=0.5,y=.5,IdAsLabel,layer=1]{A}
+ \Vertex[x=1.5,y=.5,IdAsLabel,layer=1]{B}
+ \Vertex[x=1.5,y=.5,IdAsLabel,layer=2]{C}
+ \Edge[bend=60](A)(B)
+ \Edge(C)(C)
+ \Edge[style=dashed](B)(C)
+ \end{tikzpicture}
+\end{marginfigure}
+
+\begin{docspec}
+\begin{lstlisting}
+ \begin{tikzpicture}[multilayer=3d]
+ \Vertex[x=0.5,IdAsLabel,layer=1]{A}
+ \Vertex[x=1.5,IdAsLabel,layer=1]{B}
+ \Vertex[x=1.5,IdAsLabel,layer=2]{C}
+ \Edge[bend=60](A)(B)
+ \Edge[style=dashed](B)(C)
+ \Edge(C)(C)
+ \end{tikzpicture}
+\end{lstlisting}
+\end{docspec}
+
+
+\section{Complex Networks}
+
+Similar as in Chapter \ref{chap:complex_networks} introduced, layers can be assigned to the vertices by adding a column \docopt{layer} to the file where the vertices are stored.
+
+\marginnote[8mm]{File: ml\_vertices.csv}
+\begin{docspec}
+\begin{lstlisting}
+id, x, y ,size, color,opacity,label,layer
+ A, 0, 0, .4 , green, .9 , a , 1
+ B, 1, .7, .6 , , .5 , b , 1
+ C, 2, 1, .8 ,orange, .3 , c , 1
+ D, 2, 0, .5 , red, .7 , d , 2
+ E,.2,1.5, .5 , gray, , e , 1
+ F,.1, .5, .7 , blue, .3 , f , 2
+ G, 2, 1, .4 , cyan, .7 , g , 2
+ H, 1, 1, .4 ,yellow, .7 , h , 2
+\end{lstlisting}
+\end{docspec}
+
+\marginnote[8mm]{File: ml\_edges.csv}
+\begin{docspec}
+\begin{lstlisting}
+u,v,label,lw,color ,opacity,bend,Direct
+A,B, ab ,.5,red , 1 , 30,false
+B,C, bc ,.7,blue , 1 , -60,false
+A,E, ae , 1,green , 1 , 45,true
+C,E, ce , 2,orange, 1 , 0,false
+A,A, aa ,.3,black , .5 , 75,false
+C,G, cg , 1,blue , .5 , 0,false
+E,H, eh , 1,gray , .5 , 0,false
+F,A, fa ,.7,red , .7 , 0,true
+D,F, df ,.7,cyan , 1 , 30,true
+F,H, fh ,.7,purple, 1 , 60,false
+D,G, dg ,.7,blue , .7 , 60,false
+\end{lstlisting}
+\end{docspec}
+
+With the commands \doccmd{Vertices} and \doccmd{Edges}, the network can be created automatically. Again the \doccmd{Vertices} vertices should be performed first and then the command \doccmd{Edges}.
+
+\begin{marginfigure}[25mm]
+\centering
+ \begin{tikzpicture}[multilayer=3d]
+ \SetLayerDistance{-1.5}
+ \Vertices[NoLabel,opacity=0]{data/ml_vertices.csv}
+ \begin{Layer}[layer=2]
+ \draw[orange,very thick] (-.5,-.5) rectangle (2.5,2);
+ \draw[step=.5, orange,draw opacity=.5] (-.5,-.5) grid (2.5,2);
+ \node at (-.5,-.5)[below right,orange]{Layer 2};
+ \end{Layer}
+ \Edges[NotInBG,layer={2,2}]{data/ml_edges.csv}
+ \Edges[NotInBG,layer={1,2}]{data/ml_edges.csv}
+ \Vertices[layer=2]{data/ml_vertices.csv}
+ \begin{Layer}[layer=1]
+ \draw[orange,very thick,fill=white,fill opacity=.7] (-.5,-.5) rectangle (2.5,2);
+ \draw[step=.5, orange,draw opacity=.5] (-.5,-.5) grid (2.5,2);
+ \node at (-.5,-.5)[below right,orange]{Layer 1};
+ \end{Layer}
+ \Edges[NotInBG,layer={1,1}]{data/ml_edges.csv}
+ \Vertices[layer=1]{data/ml_vertices.csv}
+ \end{tikzpicture}
+\end{marginfigure}
+
+\begin{docspec}
+\begin{lstlisting}
+ \begin{tikzpicture}[multilayer=3d]
+ \Vertices{data/ml_vertices.csv}
+ \Edges{data/ml_edges.csv}
+ \end{tikzpicture}
+\end{lstlisting}
+\end{docspec}
+
+\begin{docspecdef}
+ \doccmd{Vertices}[\docopt{layer}=\docarg{number}]\{\docarg{filename}\}
+\end{docspecdef}
+\begin{docspecdef}
+ \doccmd{Edges}[\docopt{layer}=\{\docarg{{layer $\alpha$}},\docarg{{layer $\beta$}}\}]\{\docarg{filename}\}
+\end{docspecdef}
+
+With the \doccmd{Vertices} option \docopt{layer} only the vertices on the selected layer are plotted. While, with the \doccmd{Edges} option \docopt{layer}, the edges between layer $\alpha$ and $\beta$ are plotted. The argument is a tuple of both layers indicated by $\{~,~\}$.
+
+\begin{marginfigure}[30mm]
+\centering
+ \begin{tikzpicture}[multilayer=3d]
+ \SetLayerDistance{-1.5}
+ \begin{Layer}[layer=1]
+ \draw[orange,very thick,fill=white,fill opacity=.7] (-.5,-.5) rectangle (2.5,2);
+ \draw[step=.5, orange,draw opacity=.5] (-.5,-.5) grid (2.5,2);
+ \node at (-.5,-.5)[below right,orange]{Layer 1};
+ \end{Layer}
+ \Vertices[layer=1]{data/ml_vertices.csv}
+ \Edges[NotInBG,layer={1,1}]{data/ml_edges.csv}
+ \end{tikzpicture}
+\end{marginfigure}
+
+\begin{docspec}
+\begin{lstlisting}
+ \begin{tikzpicture}[multilayer=3d]
+ \Vertices[layer=1]{data/ml_vertices.csv}
+ \Edges[layer={1,1}]{data/ml_edges.csv}
+ \end{tikzpicture}
+\end{lstlisting}
+\end{docspec}
+
+\newpage
+
+Plotting edges without defining first the vertices can be done with the \doccmd{Edges} option \docopt{vertices}. This allows modifying specific sets of Edges.
+
+\begin{marginfigure}[15mm]
+\centering
+ \begin{tikzpicture}[multilayer=3d]
+ \SetLayerDistance{-1.5}
+ \Edges[vertices=data/ml_vertices.csv,layer={1,2},style=dashed]{data/ml_edges.csv}
+ \end{tikzpicture}
+\end{marginfigure}
+
+\begin{docspec}
+\begin{lstlisting}
+ \begin{tikzpicture}[multilayer=3d]
+ \Edges[vertices=data/ml_vertices.csv,
+ layer={1,2},style=dashed]{data/ml_edges.csv}
+ \end{tikzpicture}
+\end{lstlisting}
+\end{docspec}
+
+\section{Layers and Layouts}
+
+Besides adding vertices and edges to specific layers, every other \tikzsym object can be drawn on such a layer using the \docenvdef{Layer} environment. With the option \docopt{layer}=\docarg{layer $\alpha$}, the position of the canvas can be assigned to the specific layer.
+
+\begin{docspecdef}
+ \doccmd{begin}\{\docenv{Layer}\}[\docopt{layer}=\docarg{layer $\alpha$}]
+
+ \doccmd{end}\{\docenv{Layer}\}
+\end{docspecdef}
+
+\begin{marginfigure}[40mm]
+\centering
+ \begin{tikzpicture}[multilayer=3d]
+ \SetLayerDistance{-1.5}
+ \begin{Layer}[layer=1]
+ \draw[very thick] (-.5,-.5) rectangle (2.5,2);
+ \node at (-.5,-.5)[below right]{Layer 1};
+ \end{Layer}
+ \Vertices[layer=1]{data/ml_vertices.csv}
+ \Edges[layer={1,1}]{data/ml_edges.csv}
+ \end{tikzpicture}
+\end{marginfigure}
+
+\begin{docspec}
+\begin{lstlisting}
+ \begin{tikzpicture}[multilayer=3d]
+ \begin{Layer}[layer=1]
+ \draw[very thick] (-.5,-.5) rectangle (2.5,2);
+ \node at (-.5,-.5)[below right]{Layer 1};
+ \end{Layer}
+ \Vertices[layer=1]{data/ml_vertices.csv}
+ \Edges[layer={1,1}]{data/ml_edges.csv}
+ \end{tikzpicture}
+\end{lstlisting}
+\end{docspec}
+
+\begin{docspecdef}
+ \doccmd{SetLayerDistance}\{\docarg{measure}\}
+\end{docspecdef}
+
+With the command \doccmddef{SetLayerDistance} the distance between the layers and their orientation can be modified. Per default the distance is set to $-2$\doccmd{DefaultUnit} (here \si{cm}). A negative number implies that layers with a higher number will be stacked below layers with a smaller number.
+
+\begin{docspecdef}
+ \doccmd{SetCoordinates}[\docopt{xAngle}=\docarg{number},\docopt{yAngle}=\docarg{number},\docopt{zAngle}=\docarg{number}, \docopt{xLength}=\docarg{number},\docopt{yLength}=\docarg{number},\docopt{zLength}=\docarg{number}]
+\end{docspecdef}
+
+The perspective of the three-dimensional plot can be modified by changing the orientation of the coordinate system, which is done with the command \doccmddef{SetCoordinates}. Here the angle and the length of each axis can be modified. Angles are defined as a \docarg{number} in the range between $-360$ and $360$. Per default, the lengths of the axes are defined by the identity matrix, i.e. no distortion. If the length ratio is changed $x$, $y$, and/or $z$ values are distorted. The \doccmd{SetCoordinates} command has to be entered before the \docopt{multilayer} option is called!
+
+\begin{marginfigure}[25mm]
+\centering
+\SetCoordinates[xAngle=-30,yLength=1.2,xLength=.8]
+ \begin{tikzpicture}[multilayer=3d]
+ \SetLayerDistance{-1.5}
+ \begin{Layer}[layer=1]
+ \draw[orange,very thick,fill=white,fill opacity=.7] (-.5,-.5) rectangle (2.5,2);
+ \draw[step=.5, orange,draw opacity=.5] (-.5,-.5) grid (2.5,2);
+ \node at (-.5,-.5)[below right,orange]{Layer 1};
+ \end{Layer}
+ \Vertices[layer=1]{data/ml_vertices.csv}
+ \Edges[NotInBG,layer={1,1}]{data/ml_edges.csv}
+ \end{tikzpicture}
+\end{marginfigure}
+
+\begin{docspec}
+\begin{lstlisting}
+ \SetCoordinates[xAngle=-30,yLength=1.2,xLength=.8]
+ \begin{tikzpicture}[multilayer=3d]
+ \Vertices[layer=1]{data/ml_vertices.csv}
+ \Edges[layer={1,1}]{data/ml_edges.csv}
+ \end{tikzpicture}
+\end{lstlisting}
+\end{docspec}
+\newpage
+\section{Plane}
+
+To support the illustration of multilayer networks, the background of the layer can be simply visualized with the command \doccmddef{Plane}, which allow to draw boundaries, grids and include images to the layer.
+\begin{docspecdef}
+ \doccmd{Plane}[\docopt{options}]
+\end{docspecdef}
+No obligatory arguments are needed. For a \doccmd{Plane} the following options are available:
+
+\begin{table}[h]\index{Plane!options}
+ \footnotesize%
+ \begin{center}
+ \begin{tabular}{lccl}
+ \toprule
+ Option & Default & Type &Definition \\
+ \midrule
+ x & 0 & measure& x-coordinate of the origin\\
+ y & 0 & measure& y-coordinate of the origin\\
+ width & \SI{5}{cm} & measure& width of the plane\\
+ height & \SI{5}{cm} & measure& height of the plane\\
+ color & vertexfill & color & fill color of the plane \\
+ opacity & 0.3 & number & opacity of the fill color \\
+ grid & \{\} & measure& spacing of the grid\\
+ image & \{\} & file & path to the image file \\
+ style & \{\} & string & additional \tikzsym styles \\
+ layer & 1 & number & layer where the plane is located\\
+ \midrule
+ RGB & false & Boolean & allow RGB colors \\
+ NoFill & false & Boolean & disable fill color \\
+ NoBorder & false & Boolean & disable border line \\
+ ImageAndFill&false & Boolean & allow image and fill color \\
+ InBG & false & Boolean & plane is in the background layer\\
+ \bottomrule
+ \end{tabular}
+ \scriptsize
+ \\$^a$ either measure or string
+ \end{center}
+ \caption{Options for the \doccmd{Plane} command.}
+ \label{tab:plane_options}
+\end{table}
+
+\begin{docspecdef}
+ \doccmd{Plane}[\docopt{x}=\docarg{measure},\docopt{y}=\docarg{measure},\docopt{width}=\docarg{measure},\docopt{height}=\docarg{measure}]
+\end{docspecdef}
+
+A \doccmd{Plane} is a rectangle with origin (\docopt{x},\docopt{y}), a given \docopt{width} and \docopt{height}. The origin is defined in the left lower corner and per default $(0,0)$. The plane is default \SI{5}{cm} (width) by \SI{5}{cm} (height). This default options can be changed with \doccmd{SetPlaneWidth} and \doccmd{SetPlaneHeight}\footnote{See Section \ref{sec:plane_style}.}
+
+\begin{marginfigure}%[45mm]
+\centering
+ \begin{tikzpicture}[multilayer=3d]
+ \Plane[x=-.5,y=-.5,width=3,height=2.5]
+ \begin{Layer}[layer=1]
+ \filldraw [orange] (-.5,-.5) circle (3pt);
+ \node [orange,anchor=south west] at (-.5,-.5) {origin};
+ \draw[|<->|,orange] (-.5,-.8) --++ (3,0) node [pos=.5,below]{width};
+ \draw[|<->|,orange] (2.8,-.5) --++ (0,2.5) node [pos=.5,below,sloped]{height};
+ \end{Layer}
+ \end{tikzpicture}
+\end{marginfigure}
+
+\begin{docspec}
+\begin{lstlisting}
+ \begin{tikzpicture}[multilayer=3d]
+ \Plane[x=-.5,y=-.5,width=3,height=2.5]
+ \end{tikzpicture}
+\end{lstlisting}
+\end{docspec}
+
+
+\begin{docspecdef}
+ \doccmd{Plane}[\docopt{color}=\docarg{color}]
+\end{docspecdef}
+
+To change the fill color of each plane individually, the option \docopt{color} has to be used. Without the option \docopt{RGB} set, the default \tikzsym and \LaTeX~ colors can be applied. Per default the default vertex color is used.
+
+\begin{marginfigure}[22mm]
+\centering
+ \begin{tikzpicture}[multilayer=3d]
+ \Plane[x=-.5,y=-.5,width=3,height=2.5,color=green!70!blue]
+ \end{tikzpicture}
+\end{marginfigure}
+
+\begin{docspec}
+\begin{lstlisting}
+ \begin{tikzpicture}[multilayer=3d]
+ \Plane[x=-.5,y=-.5,width=3,height=2.5,color=green!70!blue]
+ \end{tikzpicture}
+\end{lstlisting}
+\end{docspec}
+
+\newpage
+
+\begin{docspecdef}
+ \doccmd{Plane}[\docopt{opacity}=\docarg{number}]
+\end{docspecdef}
+
+With the option \docopt{opacity} the opacity of the plane fill color can be modified. The range of the \docarg{number} lies between $0$ and $1$. Where $0$ represents a fully transparent fill and $1$ a solid fill. Per default the opacity is set to $0.3$.
+
+\begin{marginfigure}[22mm]
+\centering
+ \begin{tikzpicture}[multilayer=3d]
+ \Plane[x=-.5,y=-.5,width=3,height=2.5,opacity=.7]
+ \end{tikzpicture}
+\end{marginfigure}
+
+\begin{docspec}
+\begin{lstlisting}
+ \begin{tikzpicture}[multilayer=3d]
+ \Plane[x=-.5,y=-.5,width=3,height=2.5,opacity=.7]
+ \end{tikzpicture}
+\end{lstlisting}
+\end{docspec}
+
+
+\begin{docspecdef}
+ \doccmd{Plane}[\docopt{grid}=\docarg{measure}]
+\end{docspecdef}
+
+With the option \docopt{grid} a grid will be drawn on top of the plane. The argument of this option defines the spacing between the grid lines. The entered \docarg{measures} are in default units (\si{cm}). Changing the unites (locally) can be done by adding the unit to the \docarg{measure}\footnote{e.g. x=\SI{5}{mm}}. Changes to the default setting can be made with \doccmd{SetDefaultUnit}\footnote{see Section \ref{sec:gerneral_settings}}.
+
+\begin{marginfigure}%[22mm]
+\centering
+ \begin{tikzpicture}[multilayer=3d]
+ \Plane[x=-.5,y=-.5,width=3,height=2.5,grid=5mm]
+ \begin{Layer}[layer=1]
+ \draw[<->,orange] (2,-.7) --++ (.5,0) node [pos=.5,below]{5mm};
+ \draw[<->,orange] (2.7,-.5) --++ (0,.5) node [pos=.5,below,sloped]{5mm};
+ \end{Layer}
+ \end{tikzpicture}
+\end{marginfigure}
+
+\begin{docspec}
+\begin{lstlisting}
+ \begin{tikzpicture}[multilayer=3d]
+ \Plane[x=-.5,y=-.5,width=3,height=2.5,grid=5mm]
+ \end{tikzpicture}
+\end{lstlisting}
+\end{docspec}
+
+
+\begin{docspecdef}
+ \doccmd{Plane}[\docopt{image}=\docarg{file}]
+\end{docspecdef}
+
+An image can be assigned to a plane with the option \docopt{image}. The argument is the file name and the folder where the image is stored. The width and height of the figure is scaled to the size of the plane. Without the option \docopt{ImageAndFill} the image overwrite the color options.
+
+\begin{marginfigure}[22mm]
+\centering
+ \begin{tikzpicture}[multilayer=3d]
+ \Plane[x=-.5,y=-.5,width=3,height=2.5,image=data/plane.png]
+ \end{tikzpicture}
+\end{marginfigure}
+
+\begin{docspec}
+\begin{lstlisting}
+ \begin{tikzpicture}[multilayer=3d]
+ \Plane[x=-.5,y=-.5,width=3,height=2.5,image=data/plane.png]
+ \end{tikzpicture}
+\end{lstlisting}
+\end{docspec}
+
+\begin{docspecdef}
+ \doccmd{Plane}[\docopt{style}=\docarg{string}]
+\end{docspecdef}
+
+Any other \tikzsym style option or command can be entered via the option \docopt{style}. Most of these commands can be found in the ``\tikzsym and PGF Manual''. Contain the commands additional options (e.g.\docopt{inner color}=\docarg{color}), then the argument for the \docopt{style} has to be between $\{~\}$ brackets.
+
+\begin{marginfigure}[22mm]
+\centering
+ \begin{tikzpicture}[multilayer=3d]
+ \Plane[x=-.5,y=-.5,width=3,height=2.5,style={dashed,inner color=white,outer color=red!80}]
+ \end{tikzpicture}
+\end{marginfigure}
+
+\begin{docspec}
+\begin{lstlisting}
+ \begin{tikzpicture}[multilayer=3d]
+ \Plane[x=-.5,y=-.5,width=3,height=2.5,style={dashed,inner color=white,outer color=red!80}]
+ \end{tikzpicture}
+\end{lstlisting}
+\end{docspec}
+
+\begin{docspecdef}
+ \doccmd{Plane}[\docopt{layer}=\docarg{number}]
+\end{docspecdef}
+
+With the option \docopt{layer}=\docarg{layer $\alpha$}, the position of the plane can be assigned to a specific layer. Per default the plane is drawn on layer $1$.
+
+\newpage
+\begin{marginfigure}%[22mm]
+\centering
+ \begin{tikzpicture}[multilayer=3d]
+ \SetLayerDistance{-1.5}
+ \Plane[x=-.5,y=-.5,width=3,height=2.5,color=green,layer=2]
+ \Plane[x=-.5,y=-.5,width=3,height=2.5]
+ \Text[x=-.5,y=-.5,layer=2,color=orange,anchor=north west,fontsize=\normalsize]{Layer 2}
+ \Text[x=-.5,y=-.5,layer=1,color=orange,anchor=north west,fontsize=\normalsize]{Layer 2}
+ \end{tikzpicture}
+\end{marginfigure}
+
+\begin{docspec}
+\begin{lstlisting}
+ \begin{tikzpicture}[multilayer=3d]
+ \SetLayerDistance{-1.5}
+ \Plane[x=-.5,y=-.5,width=3,height=2.5,color=green,layer=2]
+ \Plane[x=-.5,y=-.5,width=3,height=2.5]
+ \end{tikzpicture}
+\end{lstlisting}
+\end{docspec}
+
+\begin{docspecdef}
+ \doccmd{Plane}[\docopt{RGB},\docopt{color}=\docarg{RGB values}]
+\end{docspecdef}
+
+In order to display RGB colors for the plane fill color, the option \docopt{RGB} has to be entered. In combination with this option, the \docopt{color} hast to be a list with the \docarg{RGB
+values}, separated by <<,>> and within $\{~\}$.\footnote{e.g. the RGB code for white: $\{255,255,255\}$}
+
+\begin{marginfigure}
+\centering
+ \begin{tikzpicture}[multilayer=3d]
+ \Plane[x=-.5,y=-.5,width=3,height=2.5,RGB,color={0,0,0}]
+ \end{tikzpicture}
+\end{marginfigure}
+
+\begin{docspec}
+\begin{lstlisting}
+ \begin{tikzpicture}[multilayer=3d]
+ \Plane[x=-.5,y=-.5,width=3,height=2.5,RGB,color={0,0,0}]
+ \end{tikzpicture}
+\end{lstlisting}
+\end{docspec}
+
+
+\begin{docspecdef}
+ \doccmd{Plane}[\docopt{NoFill}]
+\end{docspecdef}
+\begin{docspecdef}
+ \doccmd{Plane}[\docopt{NoBorder}]
+\end{docspecdef}
+
+\docopt{NoFill} is a Boolean option which disables the fill color of the plane and \docopt{NoBorder} is a Boolean option which suppress the border line of the plane.
+
+\begin{marginfigure}[16mm]
+\centering
+ \begin{tikzpicture}[multilayer=3d]
+ \SetLayerDistance{-1.5}
+ \Plane[x=-.5,y=-.5,width=3,height=2.5,layer=2,NoFill]
+ \Plane[x=-.5,y=-.5,width=3,height=2.5,NoBorder]
+ \Text[x=-.5,y=-.5,layer=2,color=orange,anchor=north west,fontsize=\normalsize]{Layer 2}
+ \Text[x=-.5,y=-.5,layer=1,color=orange,anchor=north west,fontsize=\normalsize]{Layer 2}
+ \end{tikzpicture}
+\end{marginfigure}
+
+\begin{docspec}
+\begin{lstlisting}
+ \begin{tikzpicture}[multilayer=3d]
+ \SetLayerDistance{-1.5}
+ \Plane[x=-.5,y=-.5,width=3,height=2.5,layer=2,NoFill]
+ \Plane[x=-.5,y=-.5,width=3,height=2.5,NoBorder]
+ \end{tikzpicture}
+\end{lstlisting}
+\end{docspec}
+
+\begin{docspecdef}
+ \doccmd{Plane}[\docopt{ImageAndFill}]
+\end{docspecdef}
+
+With the option \docopt{ImageAndFill} both, image and fill color can be drawn on a plane. The option \docopt{opacity} is applied to both objects.
+
+\begin{marginfigure}[18mm]
+\centering
+ \begin{tikzpicture}[multilayer=3d]
+ \Plane[x=-.5,y=-.5,width=3,height=2.5,image=data/plane.png,color=red,opacity=.4,ImageAndFill]
+ \end{tikzpicture}
+\end{marginfigure}
+
+\begin{docspec}
+\begin{lstlisting}
+ \begin{tikzpicture}[multilayer=3d]
+ \Plane[x=-.5,y=-.5,width=3,height=2.5,image=data/plane.png,color=red,opacity=.4,ImageAndFill]
+ \end{tikzpicture}
+\end{lstlisting}
+\end{docspec}
+
+\begin{docspecdef}
+ \doccmd{Plane}[\docopt{InBG}]
+\end{docspecdef}
+
+A plane is drawn on the current layer of the \docarg{tikzpicture}. I.e. objects which are created after the plane appear on top of it and objects created before below of it. With the option \docopt{InBG} enabled, the plane is drawn on the background layer of the \docarg{tikzpicture}.
+
+\chapter{Default Settings}
+\label{chap:default_settings}
+
+In order to customize the look of the networks, each layout setting used can be modified and adapted. There are three categories: General settings, vertex style, and edge style.
+
+\section{General Settings}
+\label{sec:gerneral_settings}
+
+With the general settings mainly the sizes, distances and measures of the networks can be modified.
+
+\begin{docspecdef}
+ \doccmd{SetDefaultUnit}\{\docarg{unit}\}
+\end{docspecdef}
+
+The command \doccmddef{SetDefaultUnit} allows to change the units used for drawing the network\footnote{Except the line width, which are defined in \si{pt}.}, including diameters of the vertices, $x$ and $y$ coordinates or the distance between the layers. The default unit is \si{cm}.
+
+\begin{docspecdef}
+ \doccmd{SetDistanceScale}\{\docarg{number}\}
+\end{docspecdef}
+
+With the command \doccmddef{SetDistanceScale}, the distance between the vertices can be scaled. Per default \SI{1}{cm} entered corresponds to \SI{1}{cm} drawn, i.e. \doccmd{SetDistanceScale}\{1\}. Decreasing or increasing the scale changes the drawing distances between the vertices.
+
+\begin{docspecdef}
+ \doccmd{SetLayerDistance}\{\docarg{measure}\}
+\end{docspecdef}
+
+With the command \doccmddef{SetLayerDistance} the distance between the layers and their orientation can be modified. Per default, the distance is set to $-2$. A negative number implies that layers with a higher number will be stacked below layers with a smaller number.
+
+\begin{docspecdef}
+ \doccmd{SetCoordinates}[\docopt{xAngle}=\docarg{number},\docopt{yAngle}=\docarg{number},\docopt{zAngle}=\docarg{number}, \docopt{xLength}=\docarg{number},\docopt{yLength}=\docarg{number},\docopt{zLength}=\docarg{number}]
+\end{docspecdef}
+
+The perspective of the three-dimensional plot can be modified by changing the orientation of the coordinate system, which is done with the command \doccmddef{SetCoordinates}. Here the angle and the length of each axis can be modified. Angles are defined as a \docarg{number} in the range between $-360$ and $360$. Per default, the length of the axes are defined by the identity matrix, i.e. no distortion. If the length ratio is changed $x$, $y$, and/or $z$ values are distorted. The \doccmd{SetCoordinates} command has to be entered before the \docopt{multilayer} option is called!
+
+\section{Vertex Style}
+\label{sec:vertex_style}
+
+The appearance of the vertices can be modified with the command \doccmddef{SetVertexStyle}. This command will change the default settings of the vertices in the network.
+
+\begin{docspecdef}
+ \doccmd{SetVertexStyle}[\docarg{document options}]
+\end{docspecdef}
+
+The following options are available:
+
+\begin{table}[h]\index{Vertex!style}
+ \footnotesize%
+ \begin{center}
+ \begin{tabularx}{\textwidth}{lccX}
+ \toprule
+ Option & Default & Type &Definition \\
+ \midrule
+Shape & circle & text & shape of the vertex \\
+InnerSep & 2pt & measure & separation space which will be added inside the shape \\
+OuterSep & 0pt & measure & separation space outside the background path \\
+MinSize & 0.6\doccmd{DefaultUnit} & measure & diameter (size) of the vertex \\
+FillColor & vertexfill & color & color of the vertex \\
+FillOpacity & 1 & number & opacity of the vertex \\
+LineWidth & 1pt & measure & line width of the vertex boundary \\
+LineColor & black & color & line color of the vertex boundary \\
+LineOpacity & 1 & number & line opacity of the vertex boundary \\
+TextFont & \doccmd{scriptsize} & fontsize & font size of the vertex label \\
+TextColor & black & color & color of the vertex label \\
+TextOpacity & 1 & number & opacity of the vertex label \\
+TextRotation & 0 & number & initial rotation of the vertex \\
+ \bottomrule
+ \end{tabularx}
+ \scriptsize
+ \end{center}
+ \caption{Document style options for the vertices.}
+ \label{tab:vertex_style}
+\end{table}
+
+
+\section{Edge Style}
+\label{sec:edge_style}
+
+The appearance of the edges can be modified with the command \doccmddef{SetEdgeStyle}. This command will change the default settings of the edges in the network.
+
+\begin{docspecdef}
+ \doccmd{SetEdgeStyle}[\docarg{document options}]
+\end{docspecdef}
+
+The following options are available:
+
+\begin{table}[h]\index{Edge!style}
+ \footnotesize%
+ \begin{center}
+ \begin{tabularx}{\textwidth}{lccX}
+ \toprule
+ Option & Default & Type &Definition \\
+ \midrule
+LineWidth & 1.5pt & measure & width of the edge \\
+Color & black!75 & color & color of the edge \\
+Opacity & 1 & number & opacity of the edge \\
+Arrow & -latex & text & arrow shape of the directed edge \\
+TextFont & \doccmd{scriptsize} & fontsize & font size of the edge label \\
+TextOpacity & 1 & number & opacity of the edge label \\
+TextFillColor & white & color & fill color of the edge label \\
+TextFillOpacity & 1 & number & fill opacity of the edge label \\
+InnerSep & 0pt & measure & separation space which will be added inside the shape \\
+OuterSep & 1pt & measure & separation space outside the background path \\
+TextRotation & 0 & number & initial rotation of the edge label \\
+ \bottomrule
+ \end{tabularx}
+ \scriptsize
+ \end{center}
+ \caption{Document style options for the edges.}
+ \label{tab:edge_style}
+\end{table}
+
+\begin{docspecdef}
+ \doccmd{EdgesNotInBG}
+\end{docspecdef}
+
+\begin{docspecdef}
+ \doccmd{EdgesInBG}
+\end{docspecdef}
+
+Per default edges are drawn on the background layer, with the command \doccmddef{EdgesNotInBG} this can be disabled, while the command \doccmddef{EdgesInBG} restores the default setting.
+
+\section{Text Style}
+\label{sec:text_style}
+
+The appearance of the text can be modified with the command \doccmddef{SetTextStyle}. This command will change the default settings of the text.
+
+\begin{docspecdef}
+ \doccmd{SetTextStyle}[\docarg{document options}]
+\end{docspecdef}
+
+The following options are available:
+
+\begin{table}[h]\index{Text!style}
+ \footnotesize%
+ \begin{center}
+ \begin{tabularx}{\textwidth}{lccX}
+ \toprule
+ Option & Default & Type &Definition \\
+ \midrule
+TextFont & \doccmd{normalsize} & fontsize & font size of the text \\
+TextOpacity & 1 & number & opacity of the text \\
+TextColor & black & color & color of the text \\
+TextOpacity & 1 & number & opacity of the text \\
+InnerSep & 2pt & measure & separation space which will be added inside the shape \\
+OuterSep & 0pt & measure & separation space outside the background path \\
+TextRotation & 0 & number & initial rotation of the text \\
+ \bottomrule
+ \end{tabularx}
+ \scriptsize
+ \end{center}
+ \caption{Document style options for the planes.}
+ \label{tab:plane_style}
+\end{table}
+
+
+\section{Plane Style}
+\label{sec:plane_style}
+
+The appearance of the planes can be modified with the command \doccmddef{SetPlaneStyle}. This command will change the default settings of the planes.
+
+\begin{docspecdef}
+ \doccmd{SetPlaneStyle}[\docarg{document options}]
+\end{docspecdef}
+
+The following options are available:
+
+\begin{table}[h]\index{Plane!style}
+ \footnotesize%
+ \begin{center}
+ \begin{tabularx}{\textwidth}{lccX}
+ \toprule
+ Option & Default & Type &Definition \\
+ \midrule
+LineWidth & 1.5pt & measure & width of the border line \\
+LineColor & black & color & color of the border line \\
+LineOpacity & 1 & number & opacity of the border line \\
+FillColor & vertexfill & color & fill color of the plane \\
+FillOpacity & 0.3 & number & fill opacity of the plane \\
+GridLineWidth & 0.5pt & measure & width of the grid lines \\
+GridColor & black & color & color of the grid lines \\
+GridOpacity & 0.5 & number & opacity of the grid lines \\
+ \bottomrule
+ \end{tabularx}
+ \scriptsize
+ \end{center}
+ \caption{Document style options for the planes.}
+ \label{tab:plane_style}
+\end{table}
+
+\begin{docspecdef}
+ \doccmd{SetPlaneWidth}\{\docarg{measure}\}
+\end{docspecdef}
+\begin{docspecdef}
+ \doccmd{SetPlaneHeight}\{\docarg{measure}\}
+\end{docspecdef}
+
+With the commands \doccmd{SetPlaneWidth} and \doccmd{SetPlaneHeight} the default size of the planes can be modified.
+
+
+
+
+\chapter{Troubleshooting and Support}
+\label{chap:troubleshooting}
+
+\section{\pkg Website}\label{sec:website}
+The website for the \pkg packages is located at
+\url{https://github.com/hackl/tikz-network}. There, you'll find the actual version of the source code, a bug tracker, and the documentation.
+
+\section{Getting Help}\label{sec:getting-help}
+If you've encountered a problem with one of the \pkg commands, have a
+question, or would like to report a bug, please send an email to me or visit our website.
+
+To help me troubleshoot the problem more quickly, please try to compile your
+document using the \docclsopt{debug} class option and send the generated
+\texttt{.log} file to the mailing list with a brief description of the problem.
+
+
+\section{Errors, Warnings, and Informational Messages}\label{sec:tl-messages}
+The following is a list of all of the errors, warnings, and other messages generated by the \pkg classes and a brief description of their meanings.
+\index{error messages}\index{warning messages}\index{debug messages}
+
+% Errors
+\docmsg{Error: ! TeX capacity exceeded, sorry [main memory size=5000000].}{%
+The considered network is to large and \texttt{pdflatex} runs out of memory. This problem can be solved by using \texttt{lualatex} or \texttt{xetex} instead.}
+
+\section{Package Dependencies}\label{sec:dependencies}
+The following is a list of packages that the \pkg package rely upon. Packages marked with an asterisk are optional.
+\begin{multicols}{2}
+ \begin{itemize}
+ \item etex
+ \item xifthen
+ \item xkeyval
+ \item datatool
+ \item tikz
+ \begin{itemize}
+ \item arrows
+ \item positioning
+ \item 3d
+ \item fit
+ \item calc
+ \item backgrounds
+ \end{itemize}
+ \end{itemize}
+\end{multicols}
+
+\appendix
+\chapter{ToDo}
+\label{chap:todo}
+
+\section{Code to fix}
+\begin{itemize}
+\item change default entries for Boolean options in the vertices file.
+\end{itemize}
+
+\section{Documentation}
+\begin{itemize}
+\item add indices to the manual.
+\item extended tutorial/example to the document.
+\item clean-up and document the .sty file.
+\end{itemize}
+
+\section{Features}
+\begin{itemize}
+\item add a spherical coordinate system
+\end{itemize}
+
+\section{Add-ons}
+\begin{itemize}
+\item add QGIS to tikz-network compiler
+\end{itemize}
+
+
+\chapter{Add-ons}
+\label{chap:todo}
+
+\section{Python networks to \tikzsym with network2tikz}
+\label{sec:python_to_tikz}
+
+\subsection{Introduction}
+
+\texttt{\href{https://github.com/hackl/network2tikz}{network2tikz}} is a Python tool for converting network visualizations into \pkg figures, for native inclusion into your LaTeX documents.
+
+\texttt{network2tikz} works with Python 3 and supports (currently) the following Python network modules:
+
+\begin{itemize}
+\item \texttt{\href{https://github.com/hackl/cnet}{cnet}}
+\item \texttt{\href{http://igraph.org/python/}{python-igraph}}
+\item \texttt{\href{https://networkx.github.io/}{networkx}}
+\item \texttt{\href{https://github.com/IngoScholtes/pathpy}{pathpy}}
+\item default node/edge lists
+\end{itemize}
+
+The output of \texttt{network2tikz} is a \pkg figure. Because you are not only getting an image of your network, but also the LaTeX source file, you can easily post-process the figures (e.g. adding drawings, texts, equations,...).
+
+Since \textit{a picture is worth a thousand words} a small example:
+
+\begin{marginfigure}[65mm]
+\centering
+ \begin{tikzpicture}[scale=.8]
+ %\clip (0,0) rectangle (6,6);
+ \Vertex[x=0.785,y=2.375,color=red,opacity=0.5,label=Alice]{a}
+ \Vertex[x=5.215,y=5.650,color=blue,opacity=0.5,label=Bob]{b}
+ \Vertex[x=3.819,y=0.350,color=red,opacity=0.5,label=Claire]{c}
+ \Vertex[x=4.654,y=2.051,color=blue,opacity=0.5,label=Dennis]{d}
+ \Edge[,bend=-8.531](a)(c)
+ \Edge[,bend=-8.531](c)(d)
+ \Edge[,bend=-8.531](d)(b)
+ \Edge[,bend=-8.531](a)(b)
+ \end{tikzpicture}
+\end{marginfigure}
+
+\begin{docspec}
+\begin{lstlisting}
+#!/usr/bin/python -tt
+# -*- coding: utf-8 -*-
+
+nodes = ['a','b','c','d']
+edges = [('a','b'), ('a','c'), ('c','d'),('d','b')]
+gender = ['f', 'm', 'f', 'm']
+colors = {'m': 'blue', 'f': 'red'}
+
+style = {}
+style['node_label'] = ['Alice', 'Bob', 'Claire', 'Dennis']
+style['node_color'] = [colors[g] for g in gender]
+style['node_opacity'] = .5
+style['edge_curved'] = .1
+
+from network2tikz import plot
+plot((nodes,edges),'network.tex',**style)
+\end{lstlisting}
+\end{docspec}
+
+(see above) gives
+
+\begin{docspec}
+\begin{lstlisting}
+\documentclass{standalone}
+\usepackage{tikz-network}
+\begin{document}
+\begin{tikzpicture}
+\clip (0,0) rectangle (6,6);
+\Vertex[x=0.785,y=2.375,color=red,opacity=0.5,label=Alice]{a}
+\Vertex[x=5.215,y=5.650,color=blue,opacity=0.5,label=Bob]{b}
+\Vertex[x=3.819,y=0.350,color=red,opacity=0.5,label=Claire]{c}
+\Vertex[x=4.654,y=2.051,color=blue,opacity=0.5,label=Dennis]{d}
+\Edge[,bend=-8.531](a)(c)
+\Edge[,bend=-8.531](c)(d)
+\Edge[,bend=-8.531](d)(b)
+\Edge[,bend=-8.531](a)(b)
+\end{tikzpicture}
+\end{document}
+\end{lstlisting}
+\end{docspec}
+
+Tweaking the plot is straightforward and can be done as part of your LaTeX workflow.
+
+
+\subsection{Installation}
+
+\texttt{network2tikz} is available from the \href{https://pypi.org/project/network2tikz/}{Python Package Index}, so simply type
+
+\begin{docspec}
+\begin{lstlisting}
+pip install -U network2tikz
+\end{lstlisting}
+\end{docspec}
+
+to install/update. If your are intersted in the development version of the module check out the \href{https://github.com/hackl/network2tikz}{github repository}.
+
+\subsection{Usage}
+
+\begin{enumerate}
+\item Generate, manipulation, and study of the structure, dynamics, and functions of your complex networks as usual, with your preferred python module.
+
+\item Instead of the default plot functions (e.g. \texttt{igraph.plot()} or \texttt{networkx.draw()}) invoke \texttt{network2tikz} by
+\begin{docspec}
+\begin{lstlisting}
+plot(G,'mytikz.tex')
+\end{lstlisting}
+\end{docspec}
+to store your network visualisation as the TikZ file \texttt{mytikz.tex}. Load the module with:
+\begin{docspec}
+\begin{lstlisting}
+from network2tikz import plot
+\end{lstlisting}
+\end{docspec}
+
+\textbf{Advanced usage:}
+
+Of course, you always can improve your plot by manipulating the generated LaTeX file, but why not do it directly in Python? To do so, all visualization options available in \pkg are also implemented in \texttt{network2tikz}. The appearance of the plot can be modified by keyword arguments.\footnote{For a detailed explanation, please see Section \ref{sec:plot_function}.}
+\begin{docspec}
+\begin{lstlisting}
+my_style = {}
+plot(G,'mytikz.tex',**my_style)
+\end{lstlisting}
+\end{docspec}
+
+The arguments follow the options described above in the manual.
+
+Additionally, if you are more interested in the final output and not only the \texttt{.tex} file, used
+\begin{docspec}
+\begin{lstlisting}
+plot(G,'mypdf.pdf')
+\end{lstlisting}
+\end{docspec}
+to save your plot as a pdf, or
+\begin{docspec}
+\begin{lstlisting}
+plot(G)
+\end{lstlisting}
+\end{docspec}
+to create a temporal plot and directly show the result, i.e. similar to the matplotlib function \texttt{show()}. Finally, you can also create a node and edge list, which can be read and easily modified (in a post-processing step) as showd above.
+\begin{docspec}
+\begin{lstlisting}
+plot(G,'mycsv.csv')
+\end{lstlisting}
+\end{docspec}
+
+\item Compile the figure or add the contents of \texttt{mytikz.tex} into your LaTeX source code. With the option \docopt{standalone}=\docarg{false} only the \tikzsym figure will be saved, which can then be easily included in your \LaTeX~ document via \doccmd{input}\{\texttt{/path/to/mytikz.tex}\}.
+
+\subsection{Simple example}
+
+For illustration purpose, a similar network as in the \href{http://igraph.org/python/doc/tutorial/tutorial.html}{python-igraph tutorial} is used. If you are using another Python network module, and like to follow this example, please have a look at the \href{https://github.com/hackl/network2tikz/tree/master/examples}{provided examples}.
+
+\end{enumerate}
+
+
+Create network object and add some edges.
+\begin{docspec}
+\begin{lstlisting}
+#!/usr/bin/python -tt
+# -*- coding: utf-8 -*-
+
+import igraph
+from network2tikz import plot
+
+net = igraph.Graph([(0,1), (0,2), (2,3), (3,4), (4,2), (2,5), (5,0), (6,3),
+ (5,6), (6,6)],directed=True)
+\end{lstlisting}
+\end{docspec}
+
+Adding node and edge properties.
+
+\begin{docspec}
+\begin{lstlisting}
+net.vs["name"] = ["Alice", "Bob", "Claire", "Dennis", "Esther", "Frank", "George"]
+net.vs["age"] = [25, 31, 18, 47, 22, 23, 50]
+net.vs["gender"] = ["f", "m", "f", "m", "f", "m", "m"]
+net.es["is_formal"] = [False, False, True, True, True, False, True, False,
+ False, False]
+\end{lstlisting}
+\end{docspec}
+
+Already now the network can be plotted.
+\begin{marginfigure}[5mm]
+\centering
+ \begin{tikzpicture}[scale=.8]
+%\clip (0,0) rectangle (6,6);
+\Vertex[x=3.629,y=0.350]{a}
+\Vertex[x=3.449,y=5.457]{b}
+\Vertex[x=2.647,y=5.650]{c}
+\Vertex[x=1.013,y=3.477]{d}
+\Vertex[x=4.987,y=2.834]{e}
+\Vertex[x=4.490,y=5.182]{f}
+\Vertex[x=2.808,y=4.470]{g}
+\Edge[](a)(b)
+\Edge[](a)(c)
+\Edge[](c)(d)
+\Edge[](d)(e)
+\Edge[](e)(c)
+\Edge[](c)(f)
+\Edge[](f)(a)
+\Edge[](f)(g)
+\Edge[](g)(d)
+\Edge[](g)(g)
+ \end{tikzpicture}
+\end{marginfigure}
+
+\begin{docspec}
+\begin{lstlisting}
+plot(net)
+\end{lstlisting}
+\end{docspec}
+
+Per default, the node positions are assigned uniform random. In order to create a layout, the layout methods of the network packages can be used. Or the position of the nodes can be directly assigned, in form of a dictionary, where the key is the node id and the value is a tuple of the node position in $x$ and $y$.
+
+\begin{docspec}
+\begin{lstlisting}
+layout = {0: (4.3191, -3.5352), 1: (0.5292, -0.5292),
+ 2: (8.6559, -3.8008), 3: (12.4117, -7.5239),
+ 4: (12.7, -1.7069), 5: (6.0022, -9.0323),
+ 6: (9.7608, -12.7)}
+plot(net,layout=layout)
+\end{lstlisting}
+\end{docspec}
+
+\begin{marginfigure}[5mm]
+\centering
+ \begin{tikzpicture}[scale=.8]
+\clip (0,0) rectangle (6,6);
+\Vertex[x=2.000,y=4.341]{a}
+\Vertex[x=0.350,y=5.650]{b}
+\Vertex[x=3.889,y=4.225]{c}
+\Vertex[x=5.524,y=2.604]{d}
+\Vertex[x=5.650,y=5.137]{e}
+\Vertex[x=2.733,y=1.947]{f}
+\Vertex[x=4.370,y=0.350]{g}
+\Edge[](a)(b)
+\Edge[](a)(c)
+\Edge[](c)(d)
+\Edge[](d)(e)
+\Edge[](e)(c)
+\Edge[](c)(f)
+\Edge[](f)(a)
+\Edge[](f)(g)
+\Edge[](g)(d)
+\Edge[](g)(g)
+ \end{tikzpicture}
+\end{marginfigure}
+
+
+This should open an external pdf viewer showing a visual representation of the network, something like the one on the following figure:
+
+We can simply re-using the previous layout object here, but we also specified that we need a bigger plot ($8 \times 8$ cm) and a larger margin around the graph to fit the self loop and potential labels (1 cm).\footnote{Per default, all size values are based on cm, and all line widths are defined in pt units. With the general option \docopt{units} this can be changed, see Section \ref{sec:plot_function}.}
+
+\begin{docspec}
+\begin{lstlisting}
+plot(net, layout=layout, canvas=(8,8), margin=1)
+\end{lstlisting}
+\end{docspec}
+
+\begin{marginfigure}[5mm]
+\centering
+ \begin{tikzpicture}[scale=.8]
+%\clip (0,0) rectangle (8.0,8.0);
+\Vertex[x=2.868,y=5.518]{a}
+\Vertex[x=1.000,y=7.000]{b}
+\Vertex[x=5.006,y=5.387]{c}
+\Vertex[x=6.858,y=3.552]{d}
+\Vertex[x=7.000,y=6.419]{e}
+\Vertex[x=3.698,y=2.808]{f}
+\Vertex[x=5.551,y=1.000]{g}
+\Edge[](a)(b)
+\Edge[](a)(c)
+\Edge[](c)(d)
+\Edge[](d)(e)
+\Edge[](e)(c)
+\Edge[](c)(f)
+\Edge[](f)(a)
+\Edge[](f)(g)
+\Edge[](g)(d)
+\Edge[](g)(g)
+ \end{tikzpicture}
+\end{marginfigure}
+
+In to keep the properties of the visual representation of your network separate from the network itself. You can simply set up a Python dictionary containing the keyword arguments you would pass to \texttt{plot} and then use the double asterisk (\texttt{**}) operator to pass your specific styling attributes to \texttt{plot}:
+
+\begin{docspec}
+\begin{lstlisting}
+color_dict = {'m': 'blue', 'f': 'red'}
+visual_style = {}
+
+# Node options
+visual_style['vertex_size'] = .5
+visual_style['vertex_color'] = [color_dict[g] for g in net.vs['gender']]
+visual_style['vertex_opacity'] = .7
+visual_style['vertex_label'] = net.vs['name']
+visual_style['vertex_label_position'] = 'below'
+
+# Edge options
+visual_style['edge_width'] = [1 + 2 * int(f) for f in net.es('is_formal')]
+visual_style['edge_curved'] = 0.1
+
+# General options and plot command.
+visual_style['layout'] = layout
+visual_style['canvas'] = (8,8)
+visual_style['margin'] = 1
+
+# Plot command
+plot(net,**visual_style)
+\end{lstlisting}
+\end{docspec}
+
+\begin{marginfigure}[5mm]
+\centering
+ \begin{tikzpicture}[scale=.8]
+%\clip (0,0) rectangle (8.0,8.0);
+\Vertex[x=2.868,y=5.518,size=0.5,color=red,opacity=0.7,label=Alice,position=below]{a}
+\Vertex[x=1.000,y=7.000,size=0.5,color=blue,opacity=0.7,label=Bob,position=below]{b}
+\Vertex[x=5.006,y=5.387,size=0.5,color=red,opacity=0.7,label=Claire,position=below]{c}
+\Vertex[x=6.858,y=3.552,size=0.5,color=blue,opacity=0.7,label=Dennis,position=below]{d}
+\Vertex[x=7.000,y=6.419,size=0.5,color=red,opacity=0.7,label=Esther,position=below]{e}
+\Vertex[x=3.698,y=2.808,size=0.5,color=blue,opacity=0.7,label=Frank,position=below]{f}
+\Vertex[x=5.551,y=1.000,size=0.5,color=blue,opacity=0.7,label=George,position=below]{g}
+\Edge[,lw=1.0,bend=-8.531,Direct](a)(b)
+\Edge[,lw=1.0,bend=-8.531,Direct](a)(c)
+\Edge[,lw=3.0,bend=-8.531,Direct](c)(d)
+\Edge[,lw=3.0,bend=-8.531,Direct](d)(e)
+\Edge[,lw=3.0,bend=-8.531,Direct](e)(c)
+\Edge[,lw=1.0,bend=-8.531,Direct](c)(f)
+\Edge[,lw=3.0,bend=-8.531,Direct](f)(a)
+\Edge[,lw=1.0,bend=-8.531,Direct](f)(g)
+\Edge[,lw=1.0,bend=-8.531,Direct](g)(g)
+\Edge[,lw=1.0,bend=-8.531,Direct](g)(d)
+ \end{tikzpicture}
+\end{marginfigure}
+
+
+Beside showing the network, we can also generate the latex source file, which can be used and modified later on. This is done by adding the output file name with the ending \texttt{'.tex'}.
+
+
+\begin{docspec}
+\begin{lstlisting}
+plot(net,'network.tex',**visual_style)
+\end{lstlisting}
+\end{docspec}
+
+produces
+
+\begin{fullwidth}
+\begin{minipage}{17cm}
+\begin{docspec}
+\begin{lstlisting}
+\documentclass{standalone}
+\usepackage{tikz-network}
+\begin{document}
+\begin{tikzpicture}
+\clip (0,0) rectangle (8.0,8.0);
+\Vertex[x=2.868,y=5.518,size=0.5,color=red,opacity=0.7,label=Alice,position=below]{a}
+\Vertex[x=1.000,y=7.000,size=0.5,color=blue,opacity=0.7,label=Bob,position=below]{b}
+\Vertex[x=5.006,y=5.387,size=0.5,color=red,opacity=0.7,label=Claire,position=below]{c}
+\Vertex[x=6.858,y=3.552,size=0.5,color=blue,opacity=0.7,label=Dennis,position=below]{d}
+\Vertex[x=7.000,y=6.419,size=0.5,color=red,opacity=0.7,label=Esther,position=below]{e}
+\Vertex[x=3.698,y=2.808,size=0.5,color=blue,opacity=0.7,label=Frank,position=below]{f}
+\Vertex[x=5.551,y=1.000,size=0.5,color=blue,opacity=0.7,label=George,position=below]{g}
+\Edge[,lw=1.0,bend=-8.531,Direct](a)(b)
+\Edge[,lw=1.0,bend=-8.531,Direct](a)(c)
+\Edge[,lw=3.0,bend=-8.531,Direct](c)(d)
+\Edge[,lw=3.0,bend=-8.531,Direct](d)(e)
+\Edge[,lw=3.0,bend=-8.531,Direct](e)(c)
+\Edge[,lw=1.0,bend=-8.531,Direct](c)(f)
+\Edge[,lw=3.0,bend=-8.531,Direct](f)(a)
+\Edge[,lw=1.0,bend=-8.531,Direct](f)(g)
+\Edge[,lw=1.0,bend=-8.531,Direct](g)(g)
+\Edge[,lw=1.0,bend=-8.531,Direct](g)(d)
+\end{tikzpicture}
+\end{document}
+\end{lstlisting}
+\end{docspec}
+\end{minipage}
+\end{fullwidth}
+
+Instead of the tex file, a node and edge list can be generates, which can also be used with the library.
+
+
+\begin{docspec}
+\begin{lstlisting}
+plot(net,'network.csv',**visual_style)
+\end{lstlisting}
+\end{docspec}
+
+The node list \texttt{network\_nodes.csv}.
+\begin{docspec}
+\begin{lstlisting}
+id,x,y,size,color,opacity,label,position
+a,2.868,5.518,0.5,red,0.7,Alice,below
+b,1.000,7.000,0.5,blue,0.7,Bob,below
+c,5.006,5.387,0.5,red,0.7,Claire,below
+d,6.858,3.552,0.5,blue,0.7,Dennis,below
+e,7.000,6.419,0.5,red,0.7,Esther,below
+f,3.698,2.808,0.5,blue,0.7,Frank,below
+g,5.551,1.000,0.5,blue,0.7,George,below
+\end{lstlisting}
+\end{docspec}
+
+The edge list \texttt{network\_edges.csv}.
+\begin{docspec}
+\begin{lstlisting}
+u,v,lw,bend,Direct
+a,b,1.0,-8.531,true
+a,c,1.0,-8.531,true
+c,d,3.0,-8.531,true
+d,e,3.0,-8.531,true
+e,c,3.0,-8.531,true
+c,f,1.0,-8.531,true
+f,a,3.0,-8.531,true
+f,g,1.0,-8.531,true
+g,g,1.0,-8.531,true
+g,d,1.0,-8.531,true
+\end{lstlisting}
+\end{docspec}
+
+\subsection{The plot function in detail}
+\label{sec:plot_function}
+
+\begin{docspecdef}
+ \texttt{network2tikz.plot}(\docarg{network}, \docopt{filename}=\docarg{None}, \docopt{type}= \docarg{None}, \docopt{**kwds})
+\end{docspecdef}
+
+\textbf{Parameters}
+
+\begin{description}
+\item[network] : network object
+
+Network to be drawn. The network can be a \texttt{cnet}, \texttt{networkx}, \texttt{igraph}, \texttt{pathpy} object, or a tuple of a node list and edge list.
+
+\item[filename] : file, string or None, optional (default = None)
+
+ File or filename to save. The file ending specifies the output. i.e. is the file ending with \texttt{.tex} a tex file will be created; if the file ends with '.pdf' a pdf is created; if the file ends with \texttt{.csv}, two csv files are generated \texttt{filename\_nodes.csv} and \texttt{filename\_edges.csv}. If the filename is a tuple of strings, the first entry will be used to name the node list and the second entry for the edge list; and if no ending and no type is defined a temporary pdf file is compiled and shown.
+
+\item[type] : str or None, optional (default = None)
+
+ Type of the output file. If no ending is defined trough the filename, the type of the output file can be specified by the type option. Currently the following output types are supported: \texttt{'tex'}, \texttt{'pdf'}, \texttt{'csv'} and \texttt{'dat'}.
+
+\item[kwds] : keyword arguments, optional (default= no attributes)
+
+ Attributes used to modify the appearance of the plot. For details see below.
+
+\end{description}
+
+\textbf{Keyword arguments for node styles}
+
+\begin{description}
+\item[node\_size] : size of the node. The default is 0.6 cm.
+
+\item[node\_color] : color of the nodes. The default is light blue. Colors can
+ be specified either by common color names, or by 3-tuples of floats
+ (ranging between 0 and 255 for the R, G and B components).
+
+\item[node\_opacity] : opacity of the nodes. The default is 1. The range of the
+ number lies between 0 and 1. Where 0 represents a fully transparent fill
+ and 1 a solid fill.
+
+\item[node\_label] : labels drawn next to the nodes.
+
+\item[node\_label\_position] : Per default the position of the label is in the
+ center of the node. Classical \tikzsym commands can be used to change the
+ position of the label. Instead, using such command, the position can be
+ determined via an angle, by entering a number between -360 and 360. The
+ origin (0) is the $y$ axis. A positive number change the position counter
+ clockwise, while a negative number make changes clockwise.
+
+\item[node\_label\_distance] : distance between the node and the label.
+
+\item[node\_label\_color] : color of the label.
+
+\item[node\_label\_size] : font size of the label.
+
+\item[node\_shape] : shape of the vertices. Possibilities are:
+ 'circle', 'rectangle', 'triangle', and any other Tikz shape
+
+\item[node\_style] : Any other Tikz style option or command can be entered via
+ the option style. Most of these commands can be found in the "TikZ and
+ PGF Manual". Contain the commands additional options (e.g. shading =
+ ball), then the argument for the style has to be between \{ \} brackets.
+
+\item[node\_layer] : the node can be assigned to a specific layer.
+
+\item[node\_label\_off] : is Boolean option which suppress all labels.
+
+\item[node\_label\_as\_id] : is a Boolean option which assigns the node id as label.
+
+\item[node\_math\_mode] : is a Boolean option which transforms the labels into
+ mathematical expressions without using the \$ \$ environment.
+
+\item[node\_pseudo] : is a Boolean option which creates a pseudo node, where only
+ the node name and the node coordinate will be provided.
+\end{description}
+
+\textbf{Keyword arguments for edge styles}
+
+\begin{description}
+\item[edge\_width] : width of the edges. The default unit is point (pt).
+
+\item[edge\_color] : color of the edges. The default is gray. Colors can
+ be specified either by common color names, or by 3-tuples of floats
+ (ranging between 0 and 255 for the R, G and B components).
+
+\item[edge\_opacity] : opacity of the edges. The default is 1. The range of the
+ number lies between 0 and 1. Where 0 represents a fully transparent fill
+ and 1 a solid fill.
+
+\item[edge\_curved] : whether the edges should be curved. Positive numbers
+ correspond to edges curved in a counter-clockwise direction, negative
+ numbers correspond to edges curved in a clockwise direction. Zero
+ represents straight edges.
+
+\item[edge\_label] : labels drawn next to the edges.
+
+\item[edge\_label\_position] : Per default the label is positioned in between
+ both nodes in the center of the line. Classical Tikz commands can be used to
+ change the position of the label.
+
+\item[edge\_label\_distance] : The label position between the nodes can be
+ modified with the distance option. Per default the label is centered
+ between both nodes. The position is expressed as the percentage of the
+ length between the nodes, e.g. of distance = 0.7, the label is placed at
+ 70\% of the edge length away of Vertex i.
+
+\item[edge\_label\_color] : color of the label.
+
+\item[edge\_label\_size] : font size of the label.
+
+\item[edge\_style] : Any other Tikz style option or command can be entered via
+ the option style. Most of these commands can be found in the "TikZ and
+ PGF Manual". Contain the commands additional options (e.g. shading =
+ ball), then the argument for the style has to be between \{ \} brackets.
+
+\item[edge\_arrow\_size] : arrow size of the edges.
+
+\item[edge\_arrow\_width] : width of the arrowhead on the edge.
+
+\item[edge\_loop\_size] : modifies the length of the edge. The measure value has
+ to be insert together with its units. Per default the loop size is 1 cm.
+
+\item[edge\_loop\_position] : The position of the self-loop is defined via the
+ rotation angle around the node. The origin (0) is the y axis. A positive
+ number change the loop position counter clockwise, while a negative
+ number make changes clockwise.
+
+\item[edge\_loop\_shape] : The shape of the self-loop is defined by the enclosing
+ angle. The shape can be changed by decreasing or increasing the argument
+ value of the loop shape option.
+
+\item[edge\_directed] : is a Boolean option which transform edges to directed
+ arrows. If the network is already defined as directed network this option
+ is not needed, except to turn off the direction for one or more edges.
+
+\item[edge\_math\_mode] : is a Boolean option which transforms the labels into
+ mathematical expressions without using the \$ \$ environment.
+
+\item[edge\_not\_in\_bg] : Per default, the edge is drawn on the background layer
+ of the tikz picture. I.e. objects which are created after the edges
+ appear also on top of them. To turn this off, the option edge\_not\_in\_bg
+ has to be enabled.
+
+\end{description}
+
+\textbf{Keyword arguments for layout styles}
+
+\begin{description}
+\item[layout] : dict or string, optional (default = None)
+ A dictionary with the node positions on a 2-dimensional plane. The
+ key value of the dict represents the node id while the value
+ represents a tuple of coordinates (e.g. n = (x,y)). The initial
+ layout can be placed anywhere on the 2-dimensional plane.
+
+ Instead of a dictionary, the algorithm used for the layout can be defined
+ via a string value. Currently, supported are:
+
+ \begin{description}
+ \item[Random layout], where the nodes are uniformly at random placed in the
+ unit square. This algorithm can be enabled with the keywords:
+ ``Random'', ``random'', ``rand'', or \texttt{None}.
+
+ \item[Fruchterman-Reingold force-directed algorithm]. In this algorithm, the
+ nodes are represented by steel rings and the edges are springs between
+ them. The attractive force is analogous to the spring force and the
+ repulsive force is analogous to the electrical force. The basic idea is
+ to minimize the energy of the system by moving the nodes and changing
+ the forces between them. This algorithm can be enabled with the
+ keywords: ``Fruchterman-Reingold'', ``fruchterman\_reingold'', ``fr'',
+ ``spring\_layout'', ``spring layout'', ``FR''.
+
+ \end{description}
+
+ \begin{table}[h]
+ \footnotesize%
+ \begin{center}
+ \begin{tabular}{ll}
+ \toprule
+ Keys & Other valid keys \\
+ \midrule
+ Random & Random, random, rand, None \\
+ Fruchterman-Reingold & Fruchterman-Reingold, fruchterman\_reingold, fr \\
+ & spring\_layout, spring layout, FR \\
+ \bottomrule
+ \end{tabular}
+ \scriptsize
+ \end{center}
+ \caption{Algorithms keyword naming convention.}
+ \label{tab:algo_keywords}
+\end{table}
+
+\item[force] : float, optional (default = None)
+ Optimal distance between nodes. If None the distance is set to
+ $1/\sqrt{n}$ where $n$ is the number of nodes. Increase this value to move
+ nodes farther apart.
+
+\item[positions] : dict or None optional (default = None)
+ Initial positions for nodes as a dictionary with node as keys and values
+ as a coordinate list or tuple. If None, then use random initial
+ positions.
+
+\item[fixed] : list or None, optional (default = None)
+ Nodes to keep fixed at initial position.
+
+\item[iterations] : int, optional (default = 50)
+ Maximum number of iterations taken
+
+\item[threshold]: float, optional (default = 1e-4)
+ Threshold for relative error in node position changes. The iteration
+ stops if the error is below this threshold.
+
+\item[weight] : string or None, optional (default = None)
+ The edge attribute that holds the numerical value used for the edge
+ weight. If None, then all edge weights are 1.
+
+\item[dimension] : int, optional (default = 2)
+ Dimension of layout. Currently, only plots in 2 dimension are supported.
+
+\item[seed] : int or None, optional (default = None)
+ Set the random state for deterministic node layouts. If int, \texttt{seed} is
+ the seed used by the random number generator, if None, the a random seed
+ by created by the numpy random number generator is used.
+\end{description}
+
+\textbf{Keyword arguments for general options}
+
+\begin{description}
+\item[units] : string or tuple of strings, optional (default = ('cm','pt'))
+ Per default, all size values are based on cm, and all line widths are
+ defined in pt units. Whit this option the input units can be
+ changed. Currently supported are: Pixel 'px', Points 'pt',
+ Millimeters 'mm', and Centimeters 'cm'. If a single value is entered as
+ unit all inputs have to be defined using this unit. If a tuple of units
+ is given, the sizes are defined with the first entry the line widths with
+ the second entry.
+
+\item[layout] : dict
+ A dictionary with the node positions on a 2-dimensional plane. The
+ key value of the dict represents the node id while the value
+ represents a tuple of coordinates (e.g. n = (x,y)). The initial
+ layout can be placed anywhere on the 2-dimensional plane.
+
+\item[margins] : None, int, float or dict, optional (default = None)
+ The margins define the 'empty' space from the canvas border. If no
+ margins are defined, the margin will be calculated based on the maximum
+ node size, to avoid clipping of the nodes. If a single int or float is
+ defined all margins using this distances. To define different the margin
+ sizes for all size a dictionary with in the form of
+ \texttt{\{'top':2,'left':1,'bottom':2,'right':.5\}} has to be used.
+
+\item[canvas] : None, tuple of int or floats, optional (default = (6,6))
+ Canvas or figure\_size defines the size of the plot. The values entered as
+ a tuple of numbers where the first number is width of the figure and the
+ second number is the height of the figure. If the option \texttt{units} is not
+ used the size is specified in cm. Per default the canvas is $6 \times 6$ cm.
+
+\item[keep\_aspect\_ratio] : bool, optional (default = True)
+ Defines whether to keep the aspect ratio of the current layout. If
+ \texttt{False}, the layout will be rescaled to fit exactly into the
+ available area in the canvas (i.e. removed margins). If \texttt{True}, the
+ original aspect ratio of the layout will be kept and it will be
+ centered within the canvas.
+
+\item[standalone] : bool, optional (default = True)
+ If this option is true, a standalone latex file will be created. i.e. the
+ figure can be compiled from this output file. If standalone is false,
+ only the tikz environment is stored in the tex file, and can be imported
+ in an existing tex file.
+
+\item[clean] : bool, optional (default = True)
+ Whether non-pdf files created that are created during compilation should
+ be removed.
+
+\item[clean\_tex] : bool, optional (default = True)
+ Also remove the generated tex file.
+
+\item[compiler] : str or None, optional (default = None)
+ The name of the LaTeX compiler to use. If it is None, cnet will choose a
+ fitting one on its own. Starting with \texttt{latexmk} and then \texttt{pdflatex}.
+
+\item[compiler\_args] : list or None, optional (default = None)
+ Extra arguments that should be passed to the LaTeX compiler. If this is
+ None it defaults to an empty list.
+
+\item[silent] : bool, optional (default = True)
+ Whether to hide compiler output or not.
+
+\end{description}
+
+\textbf{Keyword naming convention}
+
+In the style dictionary multiple keywords can be used to address attributes. These keywords will be converted to an unique key word, used in the remaining code. This allows to keep the keywords used in \texttt{igraph}.
+
+\begin{table}[h]\index{Edge!options}
+ \footnotesize%
+ \begin{center}
+ \begin{tabular}{ll}
+ \toprule
+ Keys & Other valid keys \\
+ \midrule
+ node & vertex, v, n \\
+ edge & link, l, e \\
+ margins & margin \\
+ canvas & bbox, figure\_size \\
+ units & unit \\
+ fixed & fixed\_nodes, fixed\_vertices, fixed\_n, fixed\_v\\
+ positions & initial\_positions, node\_positions, vertex\_positions, n\_positions, v\_positions\\
+ \bottomrule
+ \end{tabular}
+ \scriptsize
+ \end{center}
+ \caption{Keyword naming convention.}
+ \label{tab:keywords}
+\end{table}
+
+
+%%
+% The back matter contains appendices, bibliographies, indices, glossaries, etc.
+
+
+
+
+
+
+
+\backmatter
+
+\bibliography{sample-handout}
+\bibliographystyle{plainnat}
+
+
+\printindex
+
+\end{document}
+
+% =============================================================================
+%%% Local Variables:
+%%% mode: latex
+%%% TeX-master: t
+%%% End:
Property changes on: trunk/Master/texmf-dist/doc/latex/tikz-network/tikz-network.tex
___________________________________________________________________
Added: svn:eol-style
## -0,0 +1 ##
+native
\ No newline at end of property
Added: trunk/Master/texmf-dist/tex/latex/tikz-network/tikz-network.sty
===================================================================
--- trunk/Master/texmf-dist/tex/latex/tikz-network/tikz-network.sty (rev 0)
+++ trunk/Master/texmf-dist/tex/latex/tikz-network/tikz-network.sty 2018-07-30 21:13:38 UTC (rev 48314)
@@ -0,0 +1,1392 @@
+% ============================================================================
+% File : tikz-network.sty -- Library for plotting networks in TikZ
+% Author : Juergen Hackl <hackl.j at gmx.at>
+% Creation : 2017-02-28
+% Time-stamp: <Mon 2018-07-30 11:26 juergen>
+% Version : 1.0 (2018-07-30)
+%
+% Copyright (c) 2018 Juergen Hackl <hackl.j at gmx.at>
+%
+% This program is free software: you can redistribute it and/or modify
+% it under the terms of the GNU General Public License as published by
+% the Free Software Foundation, either version 3 of the License, or
+% (at your option) any later version.
+%
+% This program is distributed in the hope that it will be useful,
+% but WITHOUT ANY WARRANTY; without even the implied warranty of
+% MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+% GNU General Public License for more details.
+%
+% You should have received a copy of the GNU General Public License
+% along with this program. If not, see <http://www.gnu.org/licenses/>.
+% ============================================================================
+
+\NeedsTeXFormat{LaTeX2e}
+\ProvidesPackage{tikz-network}[2018/07/30 tikz-network v1.0]
+
+%=============================================================================
+% Used packages
+%=============================================================================
+\RequirePackage{etex}
+\RequirePackage{xifthen}
+\RequirePackage{xkeyval}[2005/11/25]
+\RequirePackage{tikz}
+\RequirePackage{datatool}
+\RequirePackage{graphicx}
+\usetikzlibrary{arrows}
+\usetikzlibrary{positioning}
+\usetikzlibrary{3d}
+\usetikzlibrary{fit}
+\usetikzlibrary{calc}
+\usetikzlibrary{backgrounds}
+\usetikzlibrary{arrows.meta}
+\usetikzlibrary{shapes.geometric}
+%=============================================================================
+
+
+%=============================================================================
+% Predefined variables
+%=============================================================================
+
+%<--------------------------------------------------------------------------->
+% Vertex
+%<--------------------------------------------------------------------------->
+\definecolor{vertexfill}{HTML}{abd7e6}
+\newcommand*{\DefaultUnit}{cm}
+\newcommand*{\DistanceScale}{1}
+\newcommand*{\VertexShape}{circle}
+\newcommand*{\VertexInnerSep}{2pt}
+\newcommand*{\VertexOuterSep}{0pt}
+\newcommand*{\VertexMinSize}{0.6\DefaultUnit}
+\newcommand*{\VertexLineWidth}{1pt}
+\newcommand*{\VertexLineColor}{black}
+\newcommand*{\VertexLineOpacity}{1}
+\newcommand*{\VertexTextColor}{black}
+\newcommand*{\VertexFillColor}{vertexfill}
+\newcommand*{\VertexFillOpacity}{1}
+\newcommand*{\VertexTextFont}{\scriptsize}%\tiny}
+\newcommand*{\VertexTextRotation}{0}
+\newcommand*{\VertexTextOpacity}{1}
+
+%<--------------------------------------------------------------------------->
+% Edge
+%<--------------------------------------------------------------------------->
+\newcommand*{\EdgeArrow}{-latex}
+\newcommand*{\EdgeLineWidth}{1.5pt}
+\newcommand*{\EdgeColor}{black!75}
+\newcommand*{\EdgeOpacity}{1}
+\newcommand*{\EdgeTextFillColor}{white}
+\newcommand*{\EdgeTextFillOpacity}{1}
+\newcommand*{\EdgeInnerSep}{0pt}
+\newcommand*{\EdgeOuterSep}{1pt}
+\newcommand*{\EdgeTextRotation}{0}
+\newcommand*{\EdgeTextOpacity}{1}
+\newcommand*{\EdgeTextFont}{\scriptsize}
+
+
+%<--------------------------------------------------------------------------->
+% Plane
+%<--------------------------------------------------------------------------->
+\newcommand*{\PlaneLineWidth}{1.5pt}
+\newcommand*{\PlaneLineColor}{black}
+\newcommand*{\PlaneLineOpacity}{1}
+\newcommand*{\PlaneGridLineWidth}{.5pt}
+\newcommand*{\PlaneGridColor}{black}
+\newcommand*{\PlaneGridOpacity}{.5}
+\newcommand*{\PlaneFillColor}{vertexfill}
+\newcommand*{\PlaneFillOpacity}{.3}
+\newcommand*{\PlaneWidth}{5\DefaultUnit}
+\newcommand*{\PlaneHeight}{5\DefaultUnit}
+
+
+%<--------------------------------------------------------------------------->
+% Text
+%<--------------------------------------------------------------------------->
+
+\newcommand*{\TextInnerSep}{2pt}
+\newcommand*{\TextOuterSep}{0pt}
+\newcommand*{\TextFont}{\normalsize}
+\newcommand*{\TextColor}{black}
+\newcommand*{\TextRotation}{0}
+\newcommand*{\TextOpacity}{1}
+
+
+%<--------------------------------------------------------------------------->
+% Network
+%<--------------------------------------------------------------------------->
+\newcommand*{\NetworkLayerDistance}{-2}
+\newcommand*{\xAngle}{-12}
+\newcommand*{\xLength}{1}
+\newcommand*{\yAngle}{37}
+\newcommand*{\yLength}{1}
+\newcommand*{\zAngle}{90}
+\newcommand*{\zLength}{1}
+
+
+\tikzset{edge canvas/.style={}}
+
+\tikzset{multilayer 2d/.style={y={(0:1cm)},x={(90:1cm)},z={(90:0cm)},every
+ node/.append style={transform shape},}}
+
+
+\def\Origin{\draw [->] (0,0,0) -- (2,0,0) node [at end, right] {$y$};
+\draw [->] (0,0,0) -- (0,2,0) node [at end, right] {$x$};
+\draw [->] (0,0,0) -- (0,0,2) node [at end, left] {$z$};}
+
+
+%=============================================================================
+% Predefined Styles
+%=============================================================================
+
+%<--------------------------------------------------------------------------->
+% Init Default Vertex Style
+%<--------------------------------------------------------------------------->
+\define at cmdkey [NW] {DVS} {Shape}{}
+\define at cmdkey [NW] {DVS} {MinSize}{}
+\define at cmdkey [NW] {DVS} {LineWidth}{}
+\define at cmdkey [NW] {DVS} {LineColor}{}
+\define at cmdkey [NW] {DVS} {LineOpacity}{}
+\define at cmdkey [NW] {DVS} {FillColor}{}
+\define at cmdkey [NW] {DVS} {FillOpacity}{}
+\define at cmdkey [NW] {DVS} {TextColor}{}
+\define at cmdkey [NW] {DVS} {TextFont}{}
+\define at cmdkey [NW] {DVS} {TextRotation}{}
+\define at cmdkey [NW] {DVS} {TextOpacity}{}
+\define at cmdkey [NW] {DVS} {InnerSep}{}
+\define at cmdkey [NW] {DVS} {OuterSep}{}
+\presetkeys [NW] {DVS} {Shape = \VertexShape,
+ MinSize = \VertexMinSize,
+ LineWidth = \VertexLineWidth,
+ LineColor = \VertexLineColor,
+ FillColor = \VertexFillColor,
+ LineOpacity = \VertexLineOpacity,
+ FillOpacity = \VertexFillOpacity,
+ InnerSep = \VertexInnerSep,
+ OuterSep = \VertexOuterSep,
+ TextColor = \VertexTextColor,
+ TextRotation = \VertexTextRotation,
+ TextOpacity = \VertexTextOpacity,
+ TextFont = \VertexTextFont}{}
+
+%<--------------------------------------------------------------------------->
+% Init Default Edge Style
+%<--------------------------------------------------------------------------->
+\define at cmdkey [NW] {DES} {Arrow}{}
+\define at cmdkey [NW] {DES} {LineWidth}{}
+\define at cmdkey [NW] {DES} {Color}{}
+\define at cmdkey [NW] {DES} {Opacity}{}
+\define at cmdkey [NW] {DES} {TextFillColor}{}
+\define at cmdkey [NW] {DES} {TextFillOpacity}{}
+\define at cmdkey [NW] {DES} {TextFont}{}
+\define at cmdkey [NW] {DES} {TextRotation}{}
+\define at cmdkey [NW] {DES} {TextOpacity}{}
+\define at cmdkey [NW] {DES} {InnerSep}{}
+\define at cmdkey [NW] {DES} {OuterSep}{}
+\presetkeys [NW] {DES} {Arrow = \EdgeArrow,
+ LineWidth = \EdgeLineWidth,
+ Color = \EdgeColor,
+ Opacity = \EdgeOpacity,
+ TextFillColor = \EdgeTextFillColor,
+ TextFillOpacity = \EdgeTextFillOpacity,
+ InnerSep = \EdgeInnerSep,
+ OuterSep = \EdgeOuterSep,
+ TextRotation = \EdgeTextRotation,
+ TextOpacity = \EdgeTextOpacity,
+ TextFont = \EdgeTextFont}{}
+
+
+%<--------------------------------------------------------------------------->
+% Init Default Plane Style
+%<--------------------------------------------------------------------------->
+\define at cmdkey [NW] {DPS} {LineWidth}{}
+\define at cmdkey [NW] {DPS} {LineColor}{}
+\define at cmdkey [NW] {DPS} {LineOpacity}{}
+\define at cmdkey [NW] {DPS} {GridLineWidth}{}
+\define at cmdkey [NW] {DPS} {GridColor}{}
+\define at cmdkey [NW] {DPS} {GridOpacity}{}
+\define at cmdkey [NW] {DPS} {FillColor}{}
+\define at cmdkey [NW] {DPS} {FillOpacity}{}
+\presetkeys [NW] {DPS} {LineWidth = \PlaneLineWidth,
+ LineColor = \PlaneLineColor,
+ LineOpacity = \PlaneLineOpacity,
+ GridLineWidth = \PlaneGridLineWidth,
+ GridColor = \PlaneGridColor,
+ GridOpacity = \PlaneGridOpacity,
+ FillColor = \PlaneFillColor,
+ FillOpacity = \PlaneFillOpacity}{}
+
+
+%<--------------------------------------------------------------------------->
+% Init Default Text Style
+%<--------------------------------------------------------------------------->
+\define at cmdkey [NW] {DTS} {InnerSep}{}
+\define at cmdkey [NW] {DTS} {OuterSep}{}
+\define at cmdkey [NW] {DTS} {TextFont}{}
+\define at cmdkey [NW] {DTS} {TextColor}{}
+\define at cmdkey [NW] {DTS} {TextRotation}{}
+\define at cmdkey [NW] {DTS} {TextOpacity}{}
+\presetkeys [NW] {DTS} {InnerSep = \TextInnerSep,
+ OuterSep = \TextOuterSep,
+ TextFont = \TextFont,
+ TextColor = \TextColor,
+ TextRotation = \TextRotation,
+ TextOpacity = \TextOpacity}{}
+
+
+
+%<--------------------------------------------------------------------------->
+% Init Default Coordinates 3D
+%<--------------------------------------------------------------------------->
+\define at cmdkey [NW] {COS} {xAngle}{}
+\define at cmdkey [NW] {COS} {xLength}{}
+\define at cmdkey [NW] {COS} {yAngle}{}
+\define at cmdkey [NW] {COS} {yLength}{}
+\define at cmdkey [NW] {COS} {zAngle}{}
+\define at cmdkey [NW] {COS} {zLength}{}
+\presetkeys [NW] {COS} {xAngle = \xAngle,
+ xLength = \xLength,
+ yAngle = \yAngle,
+ yLength = \yLength,
+ zAngle = \zAngle,
+ zLength = \zLength}{}
+
+%<--------------------------------------------------------------------------->
+% Default Style
+%<--------------------------------------------------------------------------->
+\newcommand*{\SetVertexStyle}[1][]{\NW at SetVertexStyleDefault[#1]}%
+\def\NW at SetVertexStyleDefault[#1]{%
+\setkeys[NW]{DVS}{#1}%
+\tikzset{VertexStyle/.style = {draw,
+ shape = \cmdNW at DVS@Shape,
+ color = \cmdNW at DVS@LineColor,
+ fill = \cmdNW at DVS@FillColor,
+ inner sep = \cmdNW at DVS@InnerSep,
+ outer sep = \cmdNW at DVS@OuterSep,
+ minimum size = \cmdNW at DVS@MinSize,
+ line width = \cmdNW at DVS@LineWidth,
+ font = \cmdNW at DVS@TextFont,
+ fill opacity = \cmdNW at DVS@FillOpacity,
+ draw opacity = \cmdNW at DVS@LineOpacity}}
+\tikzset{LabelStyle/.style={ \cmdNW at DVS@TextColor,
+ font = \cmdNW at DVS@TextFont,
+ rotate = \cmdNW at DVS@TextRotation,
+ opacity = \cmdNW at DVS@TextOpacity,}}
+}%
+
+\newcommand*{\SetEdgeStyle}[1][]{\NW at SetEdgeStyleDefault[#1]}%
+\def\NW at SetEdgeStyleDefault[#1]{%
+\setkeys[NW]{DES}{#1}%
+\tikzset{EdgeStyle/.style = {\cmdNW at DES@Arrow,
+ line width = \cmdNW at DES@LineWidth,
+ color = \cmdNW at DES@Color,
+ opacity = \cmdNW at DES@Opacity}}
+\tikzset{EdgeLabelStyle/.style={circle,
+ fill = \cmdNW at DES@TextFillColor,
+ fill opacity = \cmdNW at DES@TextFillOpacity,
+ inner sep = \cmdNW at DES@InnerSep,
+ outer sep = \cmdNW at DES@OuterSep,
+ rotate = \cmdNW at DES@TextRotation,
+ text opacity = \cmdNW at DES@TextOpacity,
+ font = \cmdNW at DES@TextFont}}
+}%
+
+
+\newcommand*{\SetPlaneStyle}[1][]{\NW at SetPlaneStyleDefault[#1]}%
+\def\NW at SetPlaneStyleDefault[#1]{%
+\setkeys[NW]{DPS}{#1}%
+\tikzset{PlaneBorderStyle/.style = {draw,
+ line width = \cmdNW at DPS@LineWidth,
+ color = \cmdNW at DPS@LineColor,
+ draw opacity = \cmdNW at DPS@LineOpacity}}
+\tikzset{PlaneFillStyle/.style = {
+ fill = \cmdNW at DPS@FillColor,
+ fill opacity = \cmdNW at DPS@FillOpacity}}
+\tikzset{PlaneGridStyle/.style = {draw,
+ line width = \cmdNW at DPS@GridLineWidth,
+ color = \cmdNW at DPS@GridColor,
+ opacity = \cmdNW at DPS@GridOpacity}}
+}%
+
+
+\newcommand*{\SetTextStyle}[1][]{\NW at SetTextStyleDefault[#1]}%
+\def\NW at SetTextStyleDefault[#1]{%
+\setkeys[NW]{DTS}{#1}%
+\tikzset{TextStyle/.style = {inner sep = \cmdNW at DTS@InnerSep,
+ outer sep = \cmdNW at DTS@OuterSep,
+ color = \cmdNW at DTS@TextColor,
+ rotate = \cmdNW at DTS@TextRotation,
+ text opacity = \cmdNW at DTS@TextOpacity,
+ font = \cmdNW at DTS@TextFont}}
+}%
+
+
+\tikzset{
+ multilayer/.code={%
+ \ifthenelse{\equal{#1}{3d}}{
+ \tikzset{edge canvas/.style={canvas is yx plane at z=0}}
+ \tikzset{multilayer 3d}
+ }{
+ \tikzset{edge canvas/.style={}}
+ \tikzset{multilayer 2d}
+ }
+ },
+ }
+
+
+
+\newcommand*{\SetCoordinates}[1][]{\NW at SetCoordinates[#1]}%
+\def\NW at SetCoordinates[#1]{%
+\setkeys[NW]{COS}{#1}%
+\tikzset{multilayer 3d/.style={
+ y={(\cmdNW at COS@xAngle:\cmdNW at COS@xLength \DefaultUnit)},
+ x={(\cmdNW at COS@yAngle:\cmdNW at COS@yLength \DefaultUnit)},
+ z={(\cmdNW at COS@zAngle:\cmdNW at COS@zLength \DefaultUnit)},
+ every node/.append style={transform shape},
+ }}
+%\tikzset{edge canvas/.style={canvas is yx plane at z=0}}
+}%
+
+
+%<--------------------------------------------------------------------------->
+% Apply default settings
+%<--------------------------------------------------------------------------->
+
+\SetCoordinates
+\SetVertexStyle
+\SetEdgeStyle
+\SetPlaneStyle
+\SetTextStyle
+
+%<--------------------------------------------------------------------------->
+% Redefine settings
+%<--------------------------------------------------------------------------->
+
+\newcommand*{\SetLayerDistance}[1]{\renewcommand{\NetworkLayerDistance}{#1}}
+\newcommand*{\SetDefaultUnit}[1]{\renewcommand{\DefaultUnit}{#1}}
+\newcommand*{\SetDistanceScale}[1]{\renewcommand{\DistanceScale}{#1}}
+\newcommand*{\SetPlaneWidth}[1]{\renewcommand{\PlaneWidth}{#1}}
+\newcommand*{\SetPlaneHeight}[1]{\renewcommand{\PlaneHeight}{#1}}
+\newcommand*{\EdgesInBG}{\presetkeys [NW] {edge} {NotInBG = false}{}}
+\newcommand*{\EdgesNotInBG}{\presetkeys [NW] {edge} {NotInBG = true}{}}
+
+%=============================================================================
+% Vertex and Edge creation
+%=============================================================================
+
+%<--------------------------------------------------------------------------->
+% Init Vertex
+%<--------------------------------------------------------------------------->
+\define at cmdkey [NW] {vertex} {x}{}
+\define at cmdkey [NW] {vertex} {y}{}
+\define at cmdkey [NW] {vertex} {label}{}
+\define at cmdkey [NW] {vertex} {size}{}
+\define at cmdkey [NW] {vertex} {color}{}
+\define at cmdkey [NW] {vertex} {opacity}{}
+\define at cmdkey [NW] {vertex} {style}{}
+\define at cmdkey [NW] {vertex} {layer}{}
+\define at cmdkey [NW] {vertex} {shape}{}
+\define at cmdkey [NW] {vertex} {fontsize}{}
+\define at cmdkey [NW] {vertex} {fontcolor}{}
+\define at cmdkey [NW] {vertex} {fontscale}{}
+\define at boolkey [NW] {vertex} {RGB}[true]{}
+\define at boolkey [NW] {vertex} {IdAsLabel}[true]{}
+\define at boolkey [NW] {vertex} {NoLabel}[true]{}
+\define at boolkey [NW] {vertex} {Math}[true]{}
+\define at boolkey [NW] {vertex} {Network}[true]{}
+\define at boolkey [NW] {vertex} {Pseudo}[true]{}
+\define at cmdkey [NW] {vertex} {distance}{}
+\define at cmdkey [NW] {vertex} {position}{}
+\presetkeys [NW] {vertex} {Network = false,}{}
+
+
+%<--------------------------------------------------------------------------->
+% Vertex
+%<--------------------------------------------------------------------------->
+\newcommand*{\Vertex}[1][]{\@vertex[#1]}%
+\def\@vertex[#1]#2{%
+ \setkeys[NW]{vertex}{#1}%
+ % Check if Vertex is used in a network, if so no default settings are
+ % necessary, otherwise default settings are applied.
+ \ifNW at vertex@Network
+ \cmdNW at vertex@opacity
+ \else
+ \setkeys[NW]{vertex}{x = {0},
+ y = {0},
+ label = {},
+ size = {},
+ color = {},
+ opacity = {},
+ layer = {},
+ shape = {},
+ style = {},
+ fontsize = {},
+ fontcolor = {},
+ fontscale = {},
+ NoLabel = false,
+ IdAsLabel = false,
+ Math = false,
+ RGB = false,
+ Pseudo = false,
+ distance = {0},
+ position = {center},}
+ \setkeys[NW]{vertex}{#1}%
+ \fi
+ \@@vertex{#2}%
+}
+\def\@@vertex#1{%
+ \def\vstyle{VertexStyle}
+ \begin{scope}
+ % [
+ % scale=1,yshift=0,every node/.append style={yslant=0.5,xslant=-1},yslant=0.5,xslant=-1
+ % ]
+ % If option NoLabel is true, no labels are printed in the network
+ \ifNW at vertex@NoLabel
+ \def\vertex at L{}%
+ \def\vertex at Name{}%
+ \else
+ % if IdAsLabel is true, the label of the vertex is equal to the vertex id
+ \ifNW at vertex@IdAsLabel
+ \def\vertex at Name{#1}
+ \def\vertex at L{\vertex at Name}
+ % Otherwise the label is equal to the label if it is non empty
+ \else
+ \ifthenelse{\not\equal{\cmdNW at vertex@label}{}}{
+ \def\vertex at L{\cmdNW at vertex@label}
+ \def\vertex at Name{#1}
+ }{
+ \def\vertex at Name{#1}
+ \def\vertex at L{}
+ }
+ \fi
+ \fi
+ % Check if Math is true, if so the label will be in math mode
+ \ifNW at vertex@Math
+ \def\vertex at Label{$\vertex at L$}%
+ \else
+ \def\vertex at Label{\vertex at L}%
+ \fi
+ % Check if the size of the vertex is redefined, if so the new style is used
+ \ifthenelse{\not\equal{\cmdNW at vertex@size}{}}{
+ \tikzset{LocalVertexSize/.style={minimum size = \cmdNW at vertex@size
+ \DefaultUnit}}
+ }{
+ \tikzset{LocalVertexSize/.style={}}
+ }
+ % Check if the font size of the vertex label is redefined, if so the new style is used
+ \ifthenelse{\not\equal{\cmdNW at vertex@fontsize}{}}{
+ \tikzset{LocalVertexFontSize/.style={font = \cmdNW at vertex@fontsize}}
+ }{
+ \tikzset{LocalVertexFontSize/.style={}}
+ }
+ % Check if the font scale of the vertex label is redefined, if so the new style is used
+ \ifthenelse{\not\equal{\cmdNW at vertex@fontscale}{}}{
+ \tikzset{LocalVertexFontScale/.style={scale = \cmdNW at vertex@fontscale}}
+ }{
+ \tikzset{LocalVertexFontScale/.style={}}
+ }
+ % Check if the opacity of the vertex is redefined, if so the new style is used
+ \ifthenelse{\not\equal{\cmdNW at vertex@opacity}{}}{
+ \tikzset{LocalVertexOpacity/.style={fill opacity = \cmdNW at vertex@opacity}}
+ }{
+ \tikzset{LocalVertexOpacity/.style={}}
+ }
+ % Check if the shape of the vertex is redefined, if so the new style is used
+ \ifthenelse{\not\equal{\cmdNW at vertex@shape}{}}{
+ \tikzset{LocalVertexShape/.style={shape = \cmdNW at vertex@shape}}
+ }{
+ \tikzset{LocalVertexShape/.style={}}
+ }
+ % Check if the color of the vertex is redefined, if so the new style is
+ % used. If the option RGB is true, RGB values can be used to define the
+ % color of the vertex entered in the form {R,G,B}. If RGB is not true the
+ % default colors of tikz can be used (e.g. blue!50!green)
+ \ifNW at vertex@RGB
+ \ifthenelse{\not\equal{\cmdNW at vertex@color}{}}{
+ \pgfutil at definecolor{LocalColor}{RGB}{\cmdNW at vertex@color}
+ \tikzset{LocalVertexFill/.style={fill = LocalColor}}
+ }{
+ \tikzset{LocalVertexFill/.style={}}
+ }
+ \ifthenelse{\not\equal{\cmdNW at vertex@fontcolor}{}}{
+ \pgfutil at definecolor{LocalFontColor}{RGB}{\cmdNW at vertex@fontcolor}
+ \tikzset{LocalVertexFontColor/.style={color = LocalFontColor}}
+ }{
+ \tikzset{LocalVertexFontColor/.style={}}
+ }
+ \else
+ \ifthenelse{\not\equal{\cmdNW at vertex@color}{}}{
+ \tikzset{LocalVertexFill/.style={fill = \cmdNW at vertex@color}}
+ }{
+ \tikzset{LocalVertexFill/.style={}}
+ }
+ \ifthenelse{\not\equal{\cmdNW at vertex@fontcolor}{}}{
+ \tikzset{LocalVertexFontColor/.style={color = \cmdNW at vertex@fontcolor}}
+ }{
+ \tikzset{LocalVertexFontColor/.style={}}
+ }
+
+ \fi
+ % Define empty style for the vertex
+ \ifNW at vertex@Pseudo
+ \tikzset{LocalPseudo/.style={opacity = 0}}
+ \else
+ \tikzset{LocalPseudo/.style={}}
+ \fi
+ % Define local style for the label
+ \tikzset{LocalLabel/.style={label = {[LabelStyle, LocalVertexFontColor,
+ LocalVertexFontSize, LocalVertexFontScale, label
+ distance=\cmdNW at vertex@distance]\cmdNW at vertex@position:\vertex at Label}}}
+ \ifthenelse{\equal{\cmdNW at vertex@layer}{}}{
+ \protected at edef\@tempa{%
+ \noexpand\node[\vstyle,LocalVertexSize,LocalVertexOpacity,LocalVertexFill,LocalVertexShape,LocalLabel,\cmdNW at vertex@style,LocalPseudo](#1)%
+ at (\cmdNW at vertex@x*\DistanceScale\DefaultUnit,\cmdNW at vertex@y*\DistanceScale\DefaultUnit){}}%
+ \@tempa;
+ }{
+ \begin{scope}[canvas is yx plane at z=(\cmdNW at vertex@layer-1)*\NetworkLayerDistance]
+ \protected at edef\@tempa{%
+ \noexpand\node[\vstyle,LocalVertexSize,LocalVertexOpacity,LocalVertexFill,LocalVertexShape,LocalLabel,\cmdNW at vertex@style,LocalPseudo](#1)%
+ at (\cmdNW at vertex@x*\DistanceScale\DefaultUnit,\cmdNW at vertex@y*\DistanceScale\DefaultUnit){}}%
+ \@tempa;
+ \end{scope}
+ }
+ \end{scope}
+}
+
+%<--------------------------------------------------------------------------->
+% Init Edge
+%<--------------------------------------------------------------------------->
+\define at cmdkey [NW] {edge} {label}{}
+\define at cmdkey [NW] {edge} {lw}{}
+\define at cmdkey [NW] {edge} {color}{}
+\define at cmdkey [NW] {edge} {opacity}{}
+\define at cmdkey [NW] {edge} {style}{}
+\define at cmdkey [NW] {edge} {fontcolor}{}
+\define at cmdkey [NW] {edge} {fontsize}{}
+\define at cmdkey [NW] {edge} {fontscale}{}
+\define at boolkey [NW] {edge} {RGB}[true]{}
+\define at boolkey [NW] {edge} {Math}[true]{}
+\define at boolkey [NW] {edge} {Direct}[true]{}
+\define at boolkey [NW] {edge} {Network}[true]{}
+\define at cmdkey [NW] {edge} {bend}{}
+\define at cmdkey [NW] {edge} {position}{}
+\define at cmdkey [NW] {edge} {distance}{}
+\define at cmdkey [NW] {edge} {loopsize}{}
+\define at cmdkey [NW] {edge} {loopposition}{}
+\define at cmdkey [NW] {edge} {loopshape}{}
+\define at boolkey [NW] {edge} {NotInBG}[true]{}
+\define at cmdkey [NW] {edge} {path}{}
+\presetkeys [NW] {edge} {Network = false,}{}
+% NotInBG = false,}{}
+
+%<--------------------------------------------------------------------------->
+% Edge
+%<--------------------------------------------------------------------------->
+\newcommand*{\Edge}[1][]{\@edge[#1]}%
+\def\@edge[#1](#2)(#3){%
+ \setkeys[NW]{edge}{#1}%
+ % Check if Vertex is used in a network, if so no default settings are
+ % necessary, otherwise default settings are applied.
+ \ifNW at edge@Network
+ \else
+ \setkeys[NW]{edge}{label = {},
+ lw = {},
+ path = {},
+ color = {},
+ opacity = {},
+ style = {},
+ fontcolor = {},
+ fontsize = {},
+ fontscale = {},
+ RGB = false,
+ Math = false,
+ Direct = false,
+ NotInBG = false,
+ bend = {0},
+ loopsize = {1\DefaultUnit},
+ position = {},
+ loopposition= {0},
+ loopshape = {90},
+ distance = {.5}}
+ \setkeys[NW]{edge}{#1}%
+ \fi
+ \def\estyle{EdgeStyle}
+ %
+ \ifNW at edge@NotInBG
+ \tikzset{EdgeInBG/.style={}}
+ \else
+ \tikzset{EdgeInBG/.style={on background layer}}
+ \fi
+ \begin{scope}[edge canvas,EdgeInBG]
+ % [
+ % scale=1,yshift=0,every node/.append style={yslant=0.5,xslant=-1},yslant=0.5,xslant=-1
+ % ]
+ % Check if Direct is true, if so use default arrow style
+ \ifNW at edge@Direct
+ \tikzset{LocalArrow/.style={}}
+ \else
+ \tikzset{LocalArrow/.style={-}}
+ \fi
+ % Check if the line width of the vertex is redefined, if so the new style is
+ % used
+ \ifthenelse{\not\equal{\cmdNW at edge@lw}{}}{
+ \tikzset{LocalEdgeLW/.style={line width = \cmdNW at edge@lw}}
+ }{
+ \tikzset{LocalEdgeLW/.style={}}
+ }
+ % Check if the opacity of the vertex is redefined, if so the new style is used
+ \ifthenelse{\not\equal{\cmdNW at edge@opacity}{}}{
+ \tikzset{LocalEdgeOpacity/.style={opacity = \cmdNW at edge@opacity}}
+ \tikzset{LocalTextOpacity/.style={text opacity = \cmdNW at edge@opacity}}
+ }{
+ \tikzset{LocalEdgeOpacity/.style={}}
+ \tikzset{LocalTextOpacity/.style={}}
+ }
+ % Check if the font size of the edge is redefined, if so the new style is
+ % used
+ \ifthenelse{\not\equal{\cmdNW at edge@fontsize}{}}{
+ \tikzset{LocalEdgeFontSize/.style={font = \cmdNW at edge@fontsize}}
+ }{
+ \tikzset{LocalEdgeFontSize/.style={}}
+ }
+ % Check if the font scale of the edge is redefined, if so the new style is
+ % used
+ \ifthenelse{\not\equal{\cmdNW at edge@fontscale}{}}{
+ \tikzset{LocalEdgeFontScale/.style={scale = \cmdNW at edge@fontscale}}
+ }{
+ \tikzset{LocalEdgeFontScale/.style={}}
+ }
+ % Check if the color of the vertex is redefined, if so the new style is
+ % used. If the option RGB is true, RGB values can be used to define the
+ % color of the vertex entered in the form {R,G,B}. If RGB is not true the
+ % default colors of tikz can be used (e.g. blue!50!green)
+ \ifNW at edge@RGB
+ \ifthenelse{\not\equal{\cmdNW at edge@color}{}}{
+ \pgfutil at definecolor{LocalColor}{RGB}{\cmdNW at edge@color}
+ \tikzset{LocalEdgeColor/.style={color = LocalColor}}
+ }{
+ \tikzset{LocalEdgeColor/.style={}}
+ }
+ \ifthenelse{\not\equal{\cmdNW at edge@fontcolor}{}}{
+ \pgfutil at definecolor{LocalFontColor}{RGB}{\cmdNW at edge@fontcolor}
+ \tikzset{LocalEdgeFontColor/.style={text = LocalFontColor}}
+ }{
+ \tikzset{LocalEdgeFontColor/.style={}}
+ }
+
+ \else
+ \ifthenelse{\not\equal{\cmdNW at edge@color}{}}{
+ \tikzset{LocalEdgeColor/.style={color = \cmdNW at edge@color}}
+ }{
+ \tikzset{LocalEdgeColor/.style={}}
+ }
+ \ifthenelse{\not\equal{\cmdNW at edge@fontcolor}{}}{
+ \tikzset{LocalEdgeFontColor/.style={text = \cmdNW at edge@fontcolor}}
+ }{
+ \tikzset{LocalEdgeFontColor/.style={}}
+ }
+
+ \fi
+ % Check if Math is true, if so the label will be in math mode
+ \ifNW at edge@Math
+ \def\edge at L{$\cmdNW at edge@label$}%
+ \else
+ \def\edge at L{\cmdNW at edge@label}%
+ \fi
+ % Check if a label is assigned, if so create a label variable
+ \ifthenelse{\not\equal{\cmdNW at edge@label}{}}{ \def\edge at Label{node[EdgeLabelStyle,LocalTextOpacity,LocalEdgeFontColor,LocalEdgeFontSize,LocalEdgeFontScale,pos=\cmdNW at edge@distance,\cmdNW at edge@position]{\edge at L}}
+ }{
+ \def\edge at Label{}
+ }
+ % Check if it is a self loop or a normal edge
+ % Normal edge
+ \ifthenelse{\not\equal{#2}{#3}}{
+ \ifthenelse{\not\equal{\cmdNW at edge@path}{}}{
+ \def\edge at pts{}%
+ \@for\tmp:=\cmdNW at edge@path\do{
+ \edef\edge at pts{\edge at pts (\tmp) --}
+ }
+ \protected at edef\@tempa{%
+ \noexpand\draw[\estyle,LocalEdgeLW,LocalEdgeOpacity,LocalEdgeColor,LocalArrow,\cmdNW at edge@style] (#2) -- \edge at pts (#3)} \@tempa;
+ }{
+ \protected at edef\@tempa{%
+ \noexpand\path[\estyle,LocalEdgeLW,LocalEdgeOpacity,LocalEdgeColor,LocalArrow,\cmdNW at edge@style] (#2) edge [bend left = \cmdNW at edge@bend] \edge at Label (#3)}%
+ \@tempa;
+ }
+ }{% Self loop
+ \protected at edef\@tempa{%
+ \noexpand\path[\estyle,LocalEdgeLW,LocalEdgeOpacity,LocalEdgeColor,LocalArrow,\cmdNW at edge@style]
+ (#2) edge [in=-\cmdNW at edge@loopshape/2+\cmdNW at edge@loopposition,out=\cmdNW at edge@loopshape/2+\cmdNW at edge@loopposition,loop,distance=\cmdNW at edge@loopsize,] \edge at Label (#3)}%
+ \@tempa;
+ }
+ \end{scope}
+}
+
+
+%=============================================================================
+% Vertices and Edges creation
+%=============================================================================
+
+%<--------------------------------------------------------------------------->
+% Init Vertices
+%<--------------------------------------------------------------------------->
+\define at cmdkey [NW] {vertices} {layer}{}
+\define at cmdkey [NW] {vertices} {size}{}
+\define at cmdkey [NW] {vertices} {color}{}
+\define at cmdkey [NW] {vertices} {opacity}{}
+\define at cmdkey [NW] {vertices} {style}{}
+\define at cmdkey [NW] {vertices} {shape}{}
+\define at boolkey [NW] {vertices} {RGB}[true]{}
+\define at boolkey [NW] {vertices} {IdAsLabel}[true]{}
+\define at boolkey [NW] {vertices} {NoLabel}[true]{}
+\define at boolkey [NW] {vertices} {Math}[true]{}
+\define at boolkey [NW] {vertices} {Pseudo}[true]{}
+\presetkeys [NW] {vertices} {layer = {},
+ opacity = {},
+ size = {},
+ color = {},
+ style = {},
+ shape = {},
+ RGB = false,
+ IdAsLabel = false,
+ NoLabel = false,
+ Math = false,
+ Pseudo = false,}{}
+
+\newcommand*{\setkeysexpanded}[2]{%
+ \expandafter\setkeysexpandedaux\expandafter{#2}{#1}}
+\newcommand*{\setkeysexpandedaux}[2]{%
+ \setkeys[NW]{#2}{#1}}
+
+% \newcommand*{\setkeysexpandedx}[2]{%
+% \expandafter\setkeysexpandedauxx\expandafter{#2}{#1}}
+% \newcommand*{\setkeysexpandedauxx}[2]{%
+% \setkeys[NW]{#2}{#1}}
+
+
+
+%<--------------------------------------------------------------------------->
+% Vertices
+%<--------------------------------------------------------------------------->
+\newcommand*{\Vertices}[1][]{\@vertices[#1]}%
+\def\@vertices[#1]#2{%
+ \setkeys[NW]{vertices}{#1}%
+ \@@vertices{#2}%
+}
+\def\@@vertices#1{%
+ % Check if data base already exist
+ \DTLifdbexists{#1}{}{
+ % create dummy data base to store name
+ \DTLnewdb{#1}
+ % delete existing vertices data base
+ \DTLifdbexists{vertices}{
+ \DTLgdeletedb{vertices}
+ }{}
+ % Load data file for vertices
+ \DTLloaddb[noheader=false]{vertices}{#1}
+ }
+ % Define variables to store option values
+ \def\vertex at Options{}%
+ \def\vertex at id{}%
+ \def\vertex at rgbValues{}%
+ % Go through each row and create vertices
+ \DTLforeach*{vertices}{}{%
+ % reset storage variable to default values
+ \edef\vertex at Options{x=0,y=0,label={},size={},color={},fontcolor={},fontsize={},fontscale={},
+ opacity={},layer={},style={},NoLabel=false,IdAsLabel=false,
+ Math=false,RGB=false,Pseudo=false,distance={0},position={center},shape={},}%
+ \edef\vertex at rgbValues{}%
+ % Go through each row element
+ \DTLforeachkeyinrow{\thisValue}{
+ \DTLifeq{\dtlkey}{id}{
+ % Assign vertex id to storage variable
+ \edef\vertex at id{\thisValue}%
+ }{
+ \DTLifeq{\dtlkey}{R}{
+ \edef\vertex at rgbValues{\vertex at rgbValues \thisValue,}
+ }{
+ \DTLifeq{\dtlkey}{G}{
+ \edef\vertex at rgbValues{\vertex at rgbValues \thisValue,}
+ }{
+ \DTLifeq{\dtlkey}{B}{
+ \edef\vertex at rgbValues{\vertex at rgbValues \thisValue,}
+ }{
+ % Assign option to storage variable
+ \edef\vertex at Options{\vertex at Options \dtlkey=\thisValue,}
+ }}}}
+ }
+ % Add general settings for the Vertex
+ % NoLabel
+ \ifNW at vertices@NoLabel
+ \edef\vertex at Options{\vertex at Options NoLabel=true,}
+ \fi
+ % Pseudo
+ \ifNW at vertices@Pseudo
+ \edef\vertex at Options{\vertex at Options Pseudo=true,}
+ \fi
+ % IdAsLabel
+ \ifNW at vertices@IdAsLabel
+ \edef\vertex at Options{\vertex at Options IdAsLabel=true,}
+ \fi
+ % Math
+ \ifNW at vertices@Math
+ \edef\vertex at Options{\vertex at Options Math=true,}
+ \fi
+ % RGB
+ \ifNW at vertices@RGB
+ \edef\vertex at Options{\vertex at Options RGB=true,color={\vertex at rgbValues},}
+ \fi
+ % opacity
+ \ifthenelse{\not\equal{\cmdNW at vertices@opacity}{}}
+ {
+ \edef\vertex at Options{\vertex at Options opacity=\cmdNW at vertices@opacity,}
+ }{}
+ % size
+ \ifthenelse{\not\equal{\cmdNW at vertices@size}{}}
+ {
+ \edef\vertex at Options{\vertex at Options size=\cmdNW at vertices@size,}
+ }{}
+ % shape
+ \ifthenelse{\not\equal{\cmdNW at vertices@shape}{}}
+ {
+ \edef\vertex at Options{\vertex at Options shape=\cmdNW at vertices@shape,}
+ }{}
+ % color
+ \ifthenelse{\not\equal{\cmdNW at vertices@color}{}}
+ {
+ \edef\vertex at Options{\vertex at Options color=\cmdNW at vertices@color,}
+ }{}
+ \ifthenelse{\not\equal{\cmdNW at vertices@style}{}}{
+ \edef\vertex at Options{\vertex at Options style={\cmdNW at vertices@style},}
+ }{}
+ % Apply settings for the Vertex
+ \setkeysexpanded{vertex}{\vertex at Options}%
+ \ifthenelse{\not\equal{\cmdNW at vertices@layer}{}}{
+ \ifthenelse{\equal{\cmdNW at vertices@layer}{\cmdNW at vertex@layer}}{
+ \Vertex[Network]{\vertex at id}
+ }{}
+ }{
+ \Vertex[Network]{\vertex at id}
+ }
+ % Create Vertex
+ }
+% Delete data base
+% \DTLgdeletedb{#1}
+}
+
+%<--------------------------------------------------------------------------->
+% Init Edges
+%<--------------------------------------------------------------------------->
+\def\myvariable{\KeySettingCommand{false}}
+\define at cmdkey [NW] {edges} {layer}{}
+\define at cmdkey [NW] {edges} {vertices}{}
+\define at cmdkey [NW] {edges} {style}{}
+\define at cmdkey [NW] {edges} {lw}{}
+\define at cmdkey [NW] {edges} {color}{}
+\define at cmdkey [NW] {edges} {opacity}{}
+\define at boolkey [NW] {edges} {RGB}[true]{}
+\define at boolkey [NW] {edges} {Math}[true]{}
+\define at boolkey [NW] {edges} {Direct}[true]{}
+\define at boolkey [NW] {edges} {NoLabel}[true]{}
+\define at boolkey [NW] {edges} {NotInBG}[true]{}
+\presetkeys [NW] {edges} {layer = {},
+ vertices = {},
+ style = {},
+ lw = {},
+ color = {},
+ opacity = {},
+ RGB = false,
+ Math = false,
+ Direct = false,
+ NoLabel = false,
+ NotInBG = false,}{}
+
+\newcommand{\shortcut}[1]{%
+ \@tempswafalse
+ \@for\next:=#1\do
+ {\if at tempswa+\else\@tempswatrue\fi\textbf{\next}}%
+}
+
+\newcounter{LayerCounter}
+
+
+\newcommand\myfunc[1]{\setcounter{LayerCounter}{0}\@for\tmp:=#1\do{
+\stepcounter{LayerCounter}
+\arabic{LayerCounter}-a-\textbf{\tmp}}
+}
+
+
+%<--------------------------------------------------------------------------->
+% Edges
+%<--------------------------------------------------------------------------->
+\newcommand*{\Edges}[1][]{\@edges[#1]}%
+\def\@edges[#1]#2{%
+ \setkeys[NW]{edges}{#1}%
+ \@@edges{#2}%
+}
+\def\@@edges#1{%
+\begin{scope}
+ % Check if data base already exist
+ \DTLifdbexists{#1}{}{
+ % create dummy data base to store name
+ \DTLnewdb{#1}
+ % delete existing vertices data base
+ \DTLifdbexists{edges}{
+ \DTLgdeletedb{edges}
+ }{}
+ % Load data file for vertices
+ \DTLloaddb[noheader=false]{edges}{#1}
+ }
+
+ % % Load data file for vertices
+ % \DTLloaddb[noheader=false]{#1}{#1}
+ % Define variables to store option values
+ \def\edge at Options{}%
+ \def\edge at u{}%
+ \def\edge at v{}%
+ \def\edge at u@layer{}%
+ \def\edge at v@layer{}%
+ \def\edge at rgbValues{}%
+ \def\u at layer{}%
+ \def\v at layer{}%
+ %
+ % Assign where the edges are drawn from to
+ \ifthenelse{\not\equal{\cmdNW at edges@layer}{}}{
+ % set layer count back to 0
+ \setcounter{LayerCounter}{0}
+ \@for\tmp:=\cmdNW at edges@layer\do{
+ \stepcounter{LayerCounter}
+ \ifthenelse{\value{LayerCounter}=1}{
+ \edef\u at layer{\tmp}%
+ }{
+ \edef\v at layer{\tmp}%
+ }
+ }
+ }{}
+ % Go through each row and create edges
+ \DTLforeach*{edges}{}{%
+ % reset storage variable to default values
+ \edef\edge at Options{label = {}, lw = {}, color = {}, opacity = {}, style =
+ {}, RGB = false, Math = false, Direct = false, NotInBG = false, bend = {0}, loopsize =
+ {1\DefaultUnit}, position = {}, loopposition = {0}, loopshape = {90},
+ distance = {.5}, path = {}, fontcolor = {}, fontsize = {}, fontscale ={},}
+ \edef\edge at rgbValues{}%
+ % Go through each row element
+ \DTLforeachkeyinrow{\thisValue}{
+ \DTLifeq{\dtlkey}{u}{
+ % Assign edge id to storage variable
+ \edef\edge at u{\thisValue}%
+ }{
+ \DTLifeq{\dtlkey}{v}{
+ \edef\edge at v{\thisValue}%
+ }{
+ \DTLifeq{\dtlkey}{R}{
+ \edef\edge at rgbValues{\edge at rgbValues \thisValue,}
+ }{
+ \DTLifeq{\dtlkey}{G}{
+ \edef\edge at rgbValues{\edge at rgbValues \thisValue,}
+ }{
+ \DTLifeq{\dtlkey}{B}{
+ \edef\edge at rgbValues{\edge at rgbValues \thisValue,}
+ }{
+ % Assign option to storage variable
+ \edef\edge at Options{\edge at Options \dtlkey=\thisValue,}
+ }}}}}
+ }
+ % Add general settings for the Edges
+ % NoLabel
+ \ifNW at edges@NoLabel
+ \edef\edge at Options{\edge at Options label={},}
+ \fi
+ % Direct
+ \ifNW at edges@Direct
+ \edef\edge at Options{\edge at Options Direct=true,}
+ \fi
+ % Math
+ \ifNW at edges@Math
+ \edef\edge at Options{\edge at Options Math=true,}
+ \fi
+ % RGB
+ \ifNW at edges@RGB
+ \edef\edge at Options{\edge at Options RGB=true,color={\edge at rgbValues},}
+ \fi
+ \ifthenelse{\not\equal{\cmdNW at edges@style}{}}{
+ \edef\edge at Options{\edge at Options style={\cmdNW at edges@style},}
+ }{}
+ % lw
+ \ifthenelse{\not\equal{\cmdNW at edges@lw}{}}
+ {
+ \edef\edge at Options{\edge at Options lw=\cmdNW at edges@lw,}
+ }{}
+ % color
+ \ifthenelse{\not\equal{\cmdNW at edges@color}{}}
+ {
+ \edef\edge at Options{\edge at Options color=\cmdNW at edges@color,}
+ }{}
+ % opacity
+ \ifthenelse{\not\equal{\cmdNW at edges@opacity}{}}
+ {
+ \edef\edge at Options{\edge at Options opacity=\cmdNW at edges@opacity,}
+ }{}
+ % NoLabel
+ \ifNW at edges@NotInBG
+ \edef\edge at Options{\edge at Options NotInBG=true,}
+ \fi
+ % Apply settings for the Edge
+ \setkeysexpanded{edge}{\edge at Options}%
+ % Create Edge
+ \ifthenelse{\equal{\cmdNW at edges@layer}{}}{
+ \Edge[Network](\edge at u)(\edge at v)
+ }{
+ \ifthenelse{\not\equal{\cmdNW at edges@vertices}{}}{
+ \DTLifdbexists{vertices}{
+ \DTLgdeletedb{vertices}
+ }{}
+ % Load data file for vertices
+ \DTLloaddb[noheader=false]{vertices}{\cmdNW at edges@vertices}
+ }{}
+ % find assigned layer to the used vertices
+ \DTLforeach*{vertices}{\id=id,\layer=layer}{%
+ \ifthenelse{\equal{\id}{\edge at u}}{
+ \edef\edge at u@layer{\layer}%
+ \dtlbreak
+ }{}
+ }
+ \DTLforeach*{vertices}{\id=id,\layer=layer}{%
+ \ifthenelse{\equal{\id}{\edge at v}}{
+ \edef\edge at v@layer{\layer}%
+ \dtlbreak
+ }{}
+ }
+ % if the edge is an intra layer edge
+ \ifthenelse{\equal{\u at layer}{\v at layer}}{
+ \ifthenelse{\equal{\u at layer}{\edge at u@layer}}{
+ \ifthenelse{\equal{\v at layer}{\edge at v@layer}}{
+ \Edge[Network](\edge at u)(\edge at v)
+ }{}
+ }{}
+ }{
+ \ifthenelse{\equal{\u at layer}{\edge at u@layer}}{
+ \ifthenelse{\equal{\v at layer}{\edge at v@layer}}{
+ \Edge[Network](\edge at u)(\edge at v)
+ }{}
+ }{}
+ \ifthenelse{\equal{\v at layer}{\edge at u@layer}}{
+ \ifthenelse{\equal{\u at layer}{\edge at v@layer}}{
+ \Edge[Network](\edge at u)(\edge at v)
+ }{}
+ }{}
+
+ }
+
+ }
+ }
+\end{scope}
+% Delete data base
+% \DTLgdeletedb{#1}
+}
+
+
+%<--------------------------------------------------------------------------->
+% Init Layer
+%<--------------------------------------------------------------------------->
+\define at cmdkey [NW] {layer} {layer}{}
+\define at cmdkey [NW] {layer} {z}{}
+\define at cmdkey [NW] {layer} {opacity}{}
+\presetkeys [NW] {layer} {layer = {1},
+ opacity = {},
+ z = {},}{}
+
+%<--------------------------------------------------------------------------->
+% Layer
+%<--------------------------------------------------------------------------->
+%\def\@layer{canvas is yx plane at z=-3,}
+
+\def\@layer[#1]#2{
+\setkeys[NW]{layer}{#1}
+\ifthenelse{\not\equal{\cmdNW at layer@z}{}}{
+ \tikzset{LocalLayerZ/.style={canvas is yx plane at z=\cmdNW at layer@z}}
+}{
+ \tikzset{LocalLayerZ/.style={canvas is yx plane at z=(\cmdNW at layer@layer-1)*\NetworkLayerDistance}}
+}
+\ifthenelse{\not\equal{\cmdNW at layer@opacity}{}}{
+ \tikzset{LocalLayerOpacity/.style={fill opacity = \cmdNW at layer@opacity}}
+}{
+ \tikzset{LocalLayerOpacity/.style={}}
+}
+\begin{scope}[LocalLayerZ,LocalLayerOpacity]
+}
+%\newcommand*{\Layer}[1][]{\@layer[#1]}%
+\newenvironment{Layer}[1][]{\@layer[#1]1}{\end{scope}}
+%\def\@layer[#1]#2{}
+% \newcommand*{\Edges}[1][]{\@edges[#1]}%
+% \def\@edges[#1]#2{%
+% \setkeys[NW]{edges}{#1}%
+% \@@edges{#2}%
+% }
+% \def\@@edges#1{%
+
+
+
+%<--------------------------------------------------------------------------->
+% Init Plane
+%<--------------------------------------------------------------------------->
+\define at cmdkey [NW] {plane} {x}{}
+\define at cmdkey [NW] {plane} {y}{}
+\define at cmdkey [NW] {plane} {width}{}
+\define at cmdkey [NW] {plane} {height}{}
+\define at cmdkey [NW] {plane} {color}{}
+\define at cmdkey [NW] {plane} {opacity}{}
+\define at cmdkey [NW] {plane} {style}{}
+\define at cmdkey [NW] {plane} {layer}{}
+\define at cmdkey [NW] {plane} {grid}{}
+\define at cmdkey [NW] {plane} {image}{}
+\define at boolkey [NW] {plane} {RGB}[true]{}
+\define at boolkey [NW] {plane} {InBG}[true]{}
+\define at boolkey [NW] {plane} {NoFill}[true]{}
+\define at boolkey [NW] {plane} {NoBorder}[true]{}
+\define at boolkey [NW] {plane} {ImageAndFill}[true]{}
+\presetkeys [NW] {plane} {x = {0},
+ y = {0},
+ width = {\PlaneWidth},
+ height = {\PlaneHeight},
+ color = {},
+ opacity = {},
+ style = {},
+ layer = {1},
+ grid = {},
+ image = {},
+ RGB = false,
+ InBG = false,
+ NoFill = false,
+ NoBorder= false,
+ ImageAndFill= false,}{}
+
+
+%<--------------------------------------------------------------------------->
+% Plane
+%<--------------------------------------------------------------------------->
+\newcommand*{\Plane}[1][]{\@plane[#1]}%
+\def\@plane[#1]{%
+ \setkeys[NW]{plane}{#1}%
+ \ifNW at plane@ImageAndFill
+ \setkeys[NW]{plane}{#1}%
+ \else
+ \ifthenelse{\not\equal{\cmdNW at plane@image}{}}{
+ \setkeys[NW]{plane}{#1,NoFill}
+ }{}
+ \fi
+ \@@plane%
+}
+\def\@@plane{%
+ % Draw Plane on the Background layer
+ \ifNW at plane@InBG
+ \tikzset{InBGStyle/.style={on background layer}}
+ \else
+ \tikzset{InBGStyle/.style={}}
+ \fi
+ \begin{scope}[InBGStyle]
+ % Check if the color of the plane is redefined, if so the new style is
+ % used. If the option RGB is true, RGB values can be used to define the
+ % color of the plane entered in the form {R,G,B}. If RGB is not true the
+ % default colors of tikz can be used (e.g. blue!50!green)
+ \ifNW at plane@RGB
+ \ifthenelse{\not\equal{\cmdNW at plane@color}{}}{
+ \pgfutil at definecolor{LocalColor}{RGB}{\cmdNW at plane@color}
+ \tikzset{LocalPlaneFill/.style={fill = LocalColor}}
+ }{
+ \tikzset{LocalPlaneFill/.style={}}
+ }
+ \else
+ \ifthenelse{\not\equal{\cmdNW at plane@color}{}}{
+ \tikzset{LocalPlaneFill/.style={fill = \cmdNW at plane@color}}
+ }{
+ \tikzset{LocalPlaneFill/.style={}}
+ }
+ \fi
+ % Check if the opacity of the plane is redefined, if so the new style is used
+ \ifthenelse{\not\equal{\cmdNW at plane@opacity}{}}{
+ \tikzset{LocalPlaneOpacity/.style={fill opacity = \cmdNW at plane@opacity}}
+ }{
+ \tikzset{LocalPlaneOpacity/.style={}}
+ }
+ \begin{scope}[canvas is yx plane at z=(\cmdNW at plane@layer-1)*\NetworkLayerDistance]
+ % Draw the fill of the Plane
+ \ifNW at plane@NoFill
+ \else
+ \protected at edef\@tempa{%
+ \noexpand\fill[PlaneFillStyle,LocalPlaneFill,LocalPlaneOpacity](\cmdNW at plane@x*\DistanceScale,\cmdNW at plane@y*\DistanceScale)
+ rectangle ++ (\cmdNW at plane@width*\DistanceScale,\cmdNW at plane@height*\DistanceScale)}%
+ \@tempa;
+ \fi
+ % Draw image on the Plane
+ \ifthenelse{\not\equal{\cmdNW at plane@image}{}}{
+ %\protected at edef\@tempa{%
+ %\noexpand
+ \node[inner sep=0pt,LocalPlaneOpacity] at
+ ($(\cmdNW at plane@width/2,\cmdNW at plane@height/2)+(\cmdNW at plane@x,\cmdNW at plane@y)$)
+ {\includegraphics[width=\cmdNW at plane@width\DefaultUnit,height=\cmdNW at plane@height\DefaultUnit]{\cmdNW at plane@image}};
+ %}%
+ %\@tempa;
+ }{}
+ % Draw grid on the Plane
+ \ifthenelse{\not\equal{\cmdNW at plane@grid}{}}{
+ \protected at edef\@tempa{%
+ \noexpand\draw[PlaneGridStyle,step=\cmdNW at plane@grid*\DistanceScale](\cmdNW at plane@x*\DistanceScale,\cmdNW at plane@y*\DistanceScale)
+ grid ++ (\cmdNW at plane@width*\DistanceScale,\cmdNW at plane@height*\DistanceScale)}%
+ \@tempa;
+ }{}
+ % Draw the border of the Plane
+ \ifNW at plane@NoBorder
+ \else
+ \protected at edef\@tempa{%
+ \noexpand\draw[PlaneBorderStyle,\cmdNW at plane@style](\cmdNW at plane@x*\DistanceScale,\cmdNW at plane@y*\DistanceScale)
+ rectangle ++ (\cmdNW at plane@width*\DistanceScale,\cmdNW at plane@height*\DistanceScale)}%
+ \@tempa;
+ \fi
+ \end{scope}
+\end{scope}
+}
+
+
+%<--------------------------------------------------------------------------->
+% Init Text
+%<--------------------------------------------------------------------------->
+\define at cmdkey [NW] {text} {x}{}
+\define at cmdkey [NW] {text} {y}{}
+\define at cmdkey [NW] {text} {layer}{}
+\define at cmdkey [NW] {text} {color}{}
+\define at cmdkey [NW] {text} {opacity}{}
+\define at cmdkey [NW] {text} {rotation}{}
+\define at cmdkey [NW] {text} {fontsize}{}
+\define at cmdkey [NW] {text} {anchor}{}
+\define at cmdkey [NW] {text} {position}{}
+\define at cmdkey [NW] {text} {distance}{}
+\define at cmdkey [NW] {text} {style}{}
+\define at cmdkey [NW] {text} {width}{}
+\define at boolkey [NW] {text} {RGB}[true]{}
+\presetkeys [NW] {text} {x = {0},
+ y = {0},
+ layer = {},
+ color = {},
+ opacity = {},
+ fontsize = {},
+ anchor = {},
+ position = {},
+ rotation = {},
+ distance = {0\DefaultUnit},
+ style = {},
+ width = {},
+ RGB = false,}{}
+
+
+%<--------------------------------------------------------------------------->
+% Text
+%<--------------------------------------------------------------------------->
+\newcommand*{\Text}[1][]{\@text[#1]}%
+\def\@text[#1]#2{%
+ \setkeys[NW]{text}{#1}%
+ \@@text{#2}%
+}
+\def\@@text#1{%
+ % Check if the color of the text is redefined, if so the new style is
+ % used. If the option RGB is true, RGB values can be used to define the
+ % color of the text entered in the form {R,G,B}. If RGB is not true the
+ % default colors of tikz can be used (e.g. blue!50!green)
+ \ifNW at text@RGB
+ \ifthenelse{\not\equal{\cmdNW at text@color}{}}{
+ \pgfutil at definecolor{LocalColor}{RGB}{\cmdNW at text@color}
+ \tikzset{LocalTextColor/.style={color = LocalColor}}
+ }{
+ \tikzset{LocalTextColor/.style={}}
+ }
+ \else
+ \ifthenelse{\not\equal{\cmdNW at text@color}{}}{
+ \tikzset{LocalTextColor/.style={color = \cmdNW at text@color}}
+ }{
+ \tikzset{LocalTextColor/.style={}}
+ }
+ \fi
+ % Check if the opacity of the text is redefined, if so the new style is used
+ \ifthenelse{\not\equal{\cmdNW at text@opacity}{}}{
+ \tikzset{LocalTextOpacity/.style={text opacity = \cmdNW at text@opacity}}
+ }{
+ \tikzset{LocalTextOpacity/.style={}}
+ }
+ % Check if the rotation of the text is redefined, if so the new style is used
+ \ifthenelse{\not\equal{\cmdNW at text@rotation}{}}{
+ \tikzset{LocalTextRotation/.style={rotate = \cmdNW at text@rotation}}
+ }{
+ \tikzset{LocalTextRotation/.style={}}
+ }
+ % Check if the font size of the text is redefined, if so the new style is used
+ \ifthenelse{\not\equal{\cmdNW at text@fontsize}{}}{
+ \tikzset{LocalTextFontSize/.style={font = \cmdNW at text@fontsize}}
+ }{
+ \tikzset{LocalTextFontSize/.style={}}
+ }
+ % Check if the position of the text is redefined, if so the new style is used
+ \ifthenelse{\not\equal{\cmdNW at text@position}{}}{
+ \tikzset{LocalTextPosition/.style={\cmdNW at text@position = \cmdNW at text@distance}}
+ }{
+ \tikzset{LocalTextPosition/.style={}}
+ }
+ % Check if the anchor of the text is redefined, if so the new style is used
+ \ifthenelse{\not\equal{\cmdNW at text@anchor}{}}{
+ \tikzset{LocalTextAnchor/.style={anchor = \cmdNW at text@anchor}}
+ }{
+ \tikzset{LocalTextAnchor/.style={}}
+ }
+ % Check if the text width of the text is redefined, if so the new style is used
+ \ifthenelse{\not\equal{\cmdNW at text@width}{}}{
+ \tikzset{LocalTextWidth/.style={text width = \cmdNW at text@width}}
+ }{
+ \tikzset{LocalTextWidth/.style={}}
+ }
+ \ifthenelse{\equal{\cmdNW at text@layer}{}}{
+ \protected at edef\@tempa{%
+ \noexpand\node[TextStyle, LocalTextColor, LocalTextOpacity,
+ LocalTextFontSize, LocalTextRotation, LocalTextPosition,
+ LocalTextAnchor, LocalTextWidth, \cmdNW at text@style] at
+ (\cmdNW at text@x*\DistanceScale,\cmdNW at text@y*\DistanceScale){#1}
+ }\@tempa;%
+ }{
+ \begin{scope}[canvas is yx plane at z=(\cmdNW at text@layer-1)*\NetworkLayerDistance]
+ \protected at edef\@tempa{%
+ \noexpand\node[TextStyle, LocalTextColor, LocalTextOpacity,
+ LocalTextFontSize, LocalTextRotation, LocalTextPosition,
+ LocalTextAnchor, LocalTextWidth, \cmdNW at text@style] at
+ (\cmdNW at text@x*\DistanceScale,\cmdNW at text@y*\DistanceScale){#1}
+ }\@tempa;%
+ \end{scope}
+ }
+ }
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+\endinput
+%=============================================================================
+% eof
+%
+% Local Variables:
+% mode: latex
+% mode: flyspell
+% mode: auto-fill
+% fill-column: 80
+% TeX-master: t
+% End:
Property changes on: trunk/Master/texmf-dist/tex/latex/tikz-network/tikz-network.sty
___________________________________________________________________
Added: svn:eol-style
## -0,0 +1 ##
+native
\ No newline at end of property
Modified: trunk/Master/tlpkg/bin/tlpkg-ctan-check
===================================================================
--- trunk/Master/tlpkg/bin/tlpkg-ctan-check 2018-07-30 21:12:14 UTC (rev 48313)
+++ trunk/Master/tlpkg/bin/tlpkg-ctan-check 2018-07-30 21:13:38 UTC (rev 48314)
@@ -636,7 +636,7 @@
tikz-bayesnet tikz-cd tikz-3dplot tikz-dependency tikz-dimline
tikz-feynhand tikz-feynman tikz-inet
tikz-kalender tikz-karnaugh tikz-ladder tikz-layers
- tikz-nef tikz-opm tikz-optics tikz-palattice tikz-qtree
+ tikz-nef tikz-network tikz-opm tikz-optics tikz-palattice tikz-qtree
tikz-relay tikz-sfc tikz-timing
tikzcodeblocks tikzducks tikzinclude tikzmark tikzmarmots tikzorbital
tikzpagenodes tikzpeople tikzpfeile tikzposter tikzscale tikzsymbols
Modified: trunk/Master/tlpkg/tlpsrc/collection-pictures.tlpsrc
===================================================================
--- trunk/Master/tlpkg/tlpsrc/collection-pictures.tlpsrc 2018-07-30 21:12:14 UTC (rev 48313)
+++ trunk/Master/tlpkg/tlpsrc/collection-pictures.tlpsrc 2018-07-30 21:13:38 UTC (rev 48314)
@@ -144,6 +144,7 @@
depend tikz-ladder
depend tikz-layers
depend tikz-nef
+depend tikz-network
depend tikz-opm
depend tikz-optics
depend tikz-page
Added: trunk/Master/tlpkg/tlpsrc/tikz-network.tlpsrc
===================================================================
More information about the tex-live-commits
mailing list