texlive[47287] Master/texmf-dist: jacow (4apr18)
commits+karl at tug.org
commits+karl at tug.org
Wed Apr 4 22:17:45 CEST 2018
Revision: 47287
http://tug.org/svn/texlive?view=revision&revision=47287
Author: karl
Date: 2018-04-04 22:17:44 +0200 (Wed, 04 Apr 2018)
Log Message:
-----------
jacow (4apr18)
Modified Paths:
--------------
trunk/Master/texmf-dist/doc/latex/jacow/README
trunk/Master/texmf-dist/tex/latex/jacow/jacow.cls
Added Paths:
-----------
trunk/Master/texmf-dist/doc/latex/jacow/JACoW_A4_LaTeX.pdf
trunk/Master/texmf-dist/doc/latex/jacow/JACoW_A4_LaTeX.tex
trunk/Master/texmf-dist/doc/latex/jacow/JACoW_US_LaTeX.pdf
trunk/Master/texmf-dist/doc/latex/jacow/JACoW_US_LaTeX.tex
trunk/Master/texmf-dist/doc/latex/jacow/annexes-A4.tex
trunk/Master/texmf-dist/doc/latex/jacow/annexes-US.tex
trunk/Master/texmf-dist/doc/latex/jacow/jacow-collaboration-2018.pdf
trunk/Master/texmf-dist/doc/latex/jacow/jacow-collaboration-2018.tex
trunk/Master/texmf-dist/doc/latex/jacow/jacow2017.jpg
Removed Paths:
-------------
trunk/Master/texmf-dist/doc/latex/jacow/JACpic2v5.png
trunk/Master/texmf-dist/doc/latex/jacow/LaTeX-A4-JACoW.pdf
trunk/Master/texmf-dist/doc/latex/jacow/LaTeX-A4-JACoW.tex
trunk/Master/texmf-dist/doc/latex/jacow/LaTeX-Letter-JACoW.pdf
trunk/Master/texmf-dist/doc/latex/jacow/LaTeX-Letter-JACoW.tex
trunk/Master/texmf-dist/doc/latex/jacow/jacow-collaboration-2016.pdf
trunk/Master/texmf-dist/doc/latex/jacow/jacow-collaboration-2016.tex
Added: trunk/Master/texmf-dist/doc/latex/jacow/JACoW_A4_LaTeX.pdf
===================================================================
(Binary files differ)
Index: trunk/Master/texmf-dist/doc/latex/jacow/JACoW_A4_LaTeX.pdf
===================================================================
--- trunk/Master/texmf-dist/doc/latex/jacow/JACoW_A4_LaTeX.pdf 2018-04-04 20:17:27 UTC (rev 47286)
+++ trunk/Master/texmf-dist/doc/latex/jacow/JACoW_A4_LaTeX.pdf 2018-04-04 20:17:44 UTC (rev 47287)
Property changes on: trunk/Master/texmf-dist/doc/latex/jacow/JACoW_A4_LaTeX.pdf
___________________________________________________________________
Added: svn:mime-type
## -0,0 +1 ##
+application/pdf
\ No newline at end of property
Added: trunk/Master/texmf-dist/doc/latex/jacow/JACoW_A4_LaTeX.tex
===================================================================
--- trunk/Master/texmf-dist/doc/latex/jacow/JACoW_A4_LaTeX.tex (rev 0)
+++ trunk/Master/texmf-dist/doc/latex/jacow/JACoW_A4_LaTeX.tex 2018-04-04 20:17:44 UTC (rev 47287)
@@ -0,0 +1,468 @@
+\documentclass[a4paper,
+ %boxit, % check whether paper is inside correct margins
+ %titlepage, % separate title page
+ %refpage % separate references
+ %biblatex, % biblatex is used
+ keeplastbox, % flushend option: not to un-indent last line in References
+ %nospread, % flushend option: do not fill with whitespace to balance columns
+ %hyphens, % allow \url to hyphenate at "-" (hyphens)
+ %xetex, % use XeLaTeX to process the file
+ %luatex, % use LuaLaTeX to process the file
+ ]{jacow}
+%
+% ONLY FOR \footnote in table/tabular
+%
+\usepackage{pdfpages,multirow,ragged2e} %
+%
+% CHANGE SEQUENCE OF GRAPHICS EXTENSION TO BE EMBEDDED
+% ----------------------------------------------------
+% test for XeTeX where the sequence is by default eps-> pdf, jpg, png, pdf, ...
+% and the JACoW template provides JACpic2v3.eps and JACpic2v3.jpg which
+% might generates errors, therefore PNG and JPG first
+%
+\makeatletter%
+ \ifboolexpr{bool{xetex}}
+ {\renewcommand{\Gin at extensions}{.pdf,%
+ .png,.jpg,.bmp,.pict,.tif,.psd,.mac,.sga,.tga,.gif,%
+ .eps,.ps,%
+ }}{}
+\makeatother
+
+% CHECK FOR XeTeX/LuaTeX BEFORE DEFINING AN INPUT ENCODING
+% --------------------------------------------------------
+% utf8 is default for XeTeX/LuaTeX
+% utf8 in LaTeX only realises a small portion of codes
+%
+\ifboolexpr{bool{xetex} or bool{luatex}} % test for XeTeX/LuaTeX
+ {} % input encoding is utf8 by default
+ {\usepackage[utf8]{inputenc}} % switch to utf8
+
+\usepackage[USenglish]{babel}
+
+
+%
+% if BibLaTeX is used
+%
+\ifboolexpr{bool{jacowbiblatex}}%
+ {%
+ \addbibresource{jacow-test.bib}
+ \addbibresource{biblatex-examples.bib}
+ }{}
+\listfiles
+
+%%
+%% Lengths for the spaces in the title
+%% \setlength\titleblockstartskip{..} %before title, default 3pt
+%% \setlength\titleblockmiddleskip{..} %between title + author, default 1em
+%% \setlength\titleblockendskip{..} %afterauthor, default 1em
+
+\begin{document}
+
+\title{preparation OF papers for \NoCaseChange{JACoW} conferences\thanks{Work supported by ...}}
+
+\author{A. N. Author\thanks{email address}, H. Coauthor, Name of Institute or Affiliation, [Postal Code] City, Country \\
+ P. Contributor\textsuperscript{1}, Name of Institute or Affiliation, [Postal Code] City, Country \\
+ \textsuperscript{1}also at Name of Secondary Institute or Affiliation, [Postal Code] City, Country}
+
+\maketitle
+
+%
+\begin{abstract}
+ Many conference series have adopted the same standards
+ for electronic publication and have joined the Joint
+ Accelerator Conferences Website (JACoW) collaboration
+ for the publication of their proceedings. This document
+ describes the common requirements for the submission of
+ papers to these conferences. Please consult individual
+ conference information for page limits, method of electronic
+ submission, etc. It is not intended that this should
+ be a tutorial in word processing; the aim is to explain the
+ particular requirements for electronic publication at
+ www.JACoW.org. The abstract itself is to act as a standalone
+ entity and, as such, should not include citations. Any acronyms
+ should be expanded on their first occurrence, both in the
+ abstract and in the rest of the paper.
+ The abstract itself is to act as a standalone entity and,
+ as such, should not include citations. Any acronyms should
+ be expanded on their first occurrence, both in the abstract
+ and in the rest of the paper.
+\end{abstract}
+
+
+\section{SUBMISSION OF PAPERS}
+Each author should submit the PDF file and all source
+files (text and figures) to enable the paper to be
+reconstructed if there are processing difficulties.
+
+\section{MANUSCRIPTS}
+Templates are provided for recommended software and
+authors are advised to use them. Please consult the
+individual conference help pages if questions arise.
+
+\subsection{General Layout}
+
+These instructions are a typical implementation of the
+requirements. Manuscripts should have:
+\begin{Itemize}
+ \item Either A4 (\SI{21.0}{cm}~$\times$~\SI{29.7}{cm}; \SI{8.27}{in}~$\times$~\SI{11.69}{in}) or US
+ letter size (\SI{21.6}{cm}~$\times$~\SI{27.9}{cm}; \SI{8.5}{in}~$\times$~\SI{11.0}{in}) paper.
+ \item Single-spaced text in two columns of \SI{82.5}{mm} (\SI{3.25}{in}) with \SI{5.3}{mm}
+ (\SI{0.2}{in}) separation. More recent versions of Microsoft Word have a default spacing of 1.5 lines;
+ authors must change this to 1 line.
+ \item The text located within the margins specified in Table~\ref{l2ea4-t1}.
+\end{Itemize}
+\begin{table}[!hbt]
+ \centering
+ \caption{Margin Specifications}
+ \begin{tabular}{lcc}
+ \toprule
+ \textbf{Margin} & \textbf{A4 Paper} & \textbf{US Letter Paper} \\
+ \midrule
+ Top & \SI{37}{mm} (\SI{1.46}{in}) & \SI{0.75}{in} (\SI{19}{mm}) \\ %[3pt]
+ Bottom & \SI{19}{mm} (\SI{0.75}{in}) & \SI{0.75}{in} (\SI{19}{mm}) \\ %[3pt]
+ Left & \SI{20}{mm} (\SI{0.79}{in}) & \SI{0.79}{in} (\SI{20}{mm}) \\ %[3pt]
+ Right & \SI{20}{mm} (\SI{0.79}{in}) & \SI{1.02}{in} (\SI{26}{mm}) \\
+ \bottomrule
+ \end{tabular}
+ \label{l2ea4-t1}
+\end{table}
+
+\subsection{Fonts}
+
+In order to produce good Adobe Acrobat PDF files, authors
+using the `jacow' \LaTeX{} template are asked to use only the fonts
+defined in the ‘jacow’ class file (v2.2 of 2018/02/23) in standard,
+bold (i.\,e., \verb|\textbf|) or italic (i.\,e., \verb|\textit|) form and
+symbols from the standard set of fonts. In Word use only
+Symbol and, depending on your platform, Times or Times New Roman
+fonts in standard, bold or italic form.
+
+The layout of the text on the page is illustrated in
+Fig.~\ref{fig:paper_layout}. Note that the paper’s title and the author list should
+be the width of the full page. Tables and figures may span
+the whole \SI{170}{mm} page width, if desired (see Fig.~\ref{fig:jacow_team}), but
+if they span both columns, they should be placed at either
+the top or bottom of a page to ensure proper flow of the
+text (which should flow from top to bottom in each column
+and the numbering should be in sequence).
+
+\begin{figure}[!htb]
+ \centering
+ \includegraphics*[width=.7\columnwidth]{JACpic_mc}
+ \caption{Layout of papers.}
+ \label{fig:paper_layout}
+\end{figure}
+
+\begin{figure*}[!tbh]
+ \centering
+ \includegraphics*[width=\textwidth]{jacow2017}
+
+ \caption{Example of a full-width figure showing the JACoW Team at their annual
+ meeting in November 2017. This figure has a multi-line caption that has to be
+ justified rather than centred.}
+ \label{fig:jacow_team}
+\end{figure*}
+
+\subsection{Title and Author List}
+
+The title should use \SI{14}{pt} bold uppercase letters and be centred on the page.
+Individual letters may be lowercased to avoid misinterpretation (e.\,g., mW, GeV, SPRing-8, SwissFEL).
+To include a funding support statement, put an asterisk after the title and
+the support text at the bottom of the first column on page~1---in Word,
+use a text box; in \LaTeX, use $\backslash$\texttt{thanks}. See also the
+subsection on footnotes.
+
+The names of authors, their organizations/affiliations and
+postal addresses should be grouped by affiliation and
+listed in \SI{12}{pt} upper- and lowercase letters. The name of
+the submitting or primary author should be first, followed
+by the coauthors, alphabetically by affiliation. Where
+authors have multiple affiliations, the secondary affiliation
+may be indicated with a superscript, as shown in the
+author listing of this paper. See \textbf{ANNEX~A} for further examples.
+
+\subsection{Section Headings}
+
+Section headings should not be numbered. They should
+use \SI{12}{pt} bold uppercase letters and be centred in the
+column. All section headings should appear directly above
+the text---there should never be a column break between a heading and the
+following paragraph.
+
+\subsection{Subsection Headings}
+
+Subsection headings should not be numbered.
+They should use \SI{12}{pt} italic letters and be left aligned in the column.
+Subsection headings use Title Case (or Initial Caps)
+and should appear directly above the text---there should never be a column break
+between a subheading and the following paragraph.
+
+\subsubsection{Third-level Headings} These should use \SI{10}{pt} bold
+letters and be run into the paragraph text. In \LaTeX{} these headings are
+created with \LaTeX's \verb|\subsubsection| command.
+In the Word templates authors must bold the heading text themselves.
+This heading should be used sparingly. See Table~\ref{tab:styles}
+for its style details.
+
+\subsection{Paragraph Text}
+
+Paragraphs should use \SI{10}{pt} font and be justified (touch each side) in
+the column. The beginning of each paragraph should be indented
+approximately \SI{0.33}{cm} (\SI{0.13}{in}). The last line of a paragraph should not be
+printed by itself at the beginning of a column nor should the first line of
+a paragraph be printed by itself at the end of a column.
+
+\subsection{Figures, Tables and Equations}
+
+Place figures and tables as close to their place of mention as
+possible. Lettering in figures and tables should be large enough to
+reproduce clearly. Use of non-approved fonts in figures can lead to
+problems when the files are processed. \LaTeX{} users should be sure to use
+non-bitmapped versions of Computer Modern fonts in equations (Type\,1 PostScript
+or OpenType fonts are required. Their use is described in the help
+pages of the JACoW website\cite{jacow-help}).
+
+Each figure and table must be numbered in ascending
+order (1, 2, 3, etc.) throughout the paper.
+Figure captions are placed below figures, and table
+captions are placed above tables.
+
+Figure captions are formatted as shown in Figs.~\ref{fig:paper_layout} and \ref{fig:jacow_team},
+while table captions take the form of a heading,
+with initial letters of principle words, capitalized, and
+without a period at the end (see Tables~\ref{eq:units} and \ref{tab:styles}).
+Any reference to the contents of the table should be made from
+the body of the paper rather than from within the table
+caption itself.
+
+Single-line captions are centred in the column, while captions
+that span more than one line should be justified.
+The \LaTeX{} template uses the ‘booktabs’ package to
+format tables.
+
+When referring to a figure from within the text, the
+convention is to use the abbreviated form [e.\,g., Fig.~1]
+\emph{unless} the reference is at the start of the sentence, in
+which case “Figure” is written in full. Reference to a
+table, however, is never abbreviated [e.\,g., Table~1].
+
+
+If a displayed equation needs a number (i.\,e., it will be
+referenced), place it in parentheses, and flush with the
+right margin of the column. The equation itself should be
+indented and centred, as far as is possible:
+\begin{equation}\label{eq:units}
+ C_B=\frac{q^3}{3\epsilon_{0} mc}=\SI{3.54}{\micro eV/T}
+\end{equation}
+
+When referencing a numbered equation, use the word
+“Equation” at the start of a sentence, and the abbreviated
+form, “Eq.”, if in the text. The equation number is placed
+in parentheses [e.g., Eq. (1)].
+
+\subsection{Units}
+
+Units should be written using the standard, roman font,
+not the italic font, as shown in Eq.~(\ref{eq:units}).
+An unbreakable space should precede a unit (in \LaTeX{} use a “\verb|\,|”,
+the template uses the ‘siunitx’ package to format units).
+Some examples are: \SI{3}{keV},
+\SI{100}{kW}, \SI{7}{µm}. When a unit appears in a hyphenated,
+compound adjective that precedes a noun, it takes on the
+singular form, e.\,g., the 3.8-metre long undulator.
+
+\subsection{References}
+%
+% References examples given here are not formatted using \cite as there
+% are only reference numbers [1] and [2] in the template
+%
+All bibliographical and web references should be numbered and listed at the
+end of the paper in a section called \textbf{REFERENCES}. When citing a
+reference in the text, place the corresponding reference number in square
+brackets~[1]. The reference citations in the text should be numbered
+in ascending order. Multiple citations should appear in
+the same bracket~[3, 4] and
+with ranges where appropriate~[1--4, 10].
+
+A URL or DOI may be included as part of a reference, but its
+hyperlink should NOT be added. The usual practice is to
+use a monospace font for the URL so as to help distinguish
+it from normal text. In \LaTeX{} the ‘url’ package is used.
+
+For authors to properly cite the resources used when researching
+their papers is an obligation. In the interest of
+promoting uniformity and complete citations, the IEEE
+Editorial Style for Transactions and Journals, which itself
+adheres to the Chicago Manual of Style, has been
+adopted~\cite{IEEE}. Please consult the appended material, \textbf{ANNEX~B},
+for details. The onus is on authors to pay attention to
+the details of the said style to ensure complete, accurate
+and properly formatted references.
+
+ \begin{table}[h!b]
+ \setlength\tabcolsep{3.5pt}
+ \centering
+ \caption{Summary of Styles}
+ \label{tab:styles}
+ \begin{tabular}{llcc}
+ \toprule
+ \textbf{Style} & \textbf{Font} & \textbf{Space} & \textbf{Space} \\
+ & & \textbf{Before} & \textbf{After} \\
+ \midrule
+ \textbf{PAPER} & \SI{14}{pt} & \SI{0}{pt} & \SI{3}{pt} \\
+ \textbf{TITLE} & \textbf{UPPERCASE} & & \\
+ & \textbf{EXCEPT FOR} & & \\
+ & \textbf{REQUIRED lowercase} & & \\
+ & \textbf{letters} & & \\
+ & \textbf{Bold} & & \\[5pt]
+ %\midrule
+ Author list & \SI{12}{pt} & \SI{9}{pt} & \SI{12}{pt} \\
+ & UPPER- and lowercase & & \\[5pt]
+ %\midrule
+ \textit{Abstract} & \SI{12}{pt} & \SI{0}{pt} & \SI{3}{pt} \\
+ \textit{Title} & \textit{Initial Caps} & & \\
+ & \textit{Italic} & & \\[5pt]
+ %\midrule
+ \textbf{Section} & \SI{12}{pt} & \SI{9}{pt} & \SI{3}{pt} \\
+ \textbf{Heading} & \textbf{UPPERCASE} & & \\
+ & \textbf{bold} & & \\[5pt]
+ %\midrule
+ \textit{Subsection} & \SI{12}{pt} & \SI{6}{pt} & \SI{3}{pt} \\
+ \textit{Heading}
+ & \textit{Initial Caps} & & \\
+ & \textit{Italic} & & \\[5pt]
+ %\midrule
+ \textbf{Third-level} & \SI{10}{pt} & \SI{6}{pt} & \SI{0}{pt} \\
+ \textbf{Heading}
+ & \textbf{Initial Caps} & & \\
+ & \textbf{Bold} & & \\[5pt]
+ %\midrule
+ Figure & \SI{10}{pt} & \SI{3}{pt} & $\ge$\SI{3}{pt} \\
+ Captions & & & \\[5pt]
+ %\midrule
+ Table & \SI{10}{pt} & $\ge$\SI{3}{pt} & \SI{3}{pt} \\
+ Captions & & & \\[5pt]
+ %\midrule
+ Equations & \SI{10}{pt} base font & $\ge$\SI{6}{pt} & $\ge$\SI{6}{pt} \\[5pt]
+ %\midrule
+ References & \SI{9}{pt} & \SI{0}{pt} & \SI{3}{pt} \\
+ when $\le9$ & \verb|\bibliography{9}| & & \\[5pt]
+ Refs. $\ge10$ & \SI{9}{pt} & \SI{0}{pt} & \SI{3}{pt} \\
+ & \verb|\bibliography{99}| & & \\
+ \bottomrule %\SI{0.25}{in}
+ \end{tabular}
+\end{table}
+
+\subsection{Footnotes}
+
+Footnotes on the title and author lines may be used for acknowledgements
+and e-mail addresses. A non-numeric sequence of characters (*, \#,
+\dag, \ddag, \P) should be used to indicate the footnote.
+These “pseudo footnotes” should only
+appear at the bottom of the first column on the first page.
+
+Any other footnote in the body of the paper should
+use the normal numeric sequencing (i.\,e., 1, 2, 3)
+and appear at the bottom of the same column in which
+it is used. All footnotes are of 8pt font size.
+
+\subsection{Acronyms}
+
+Acronyms should be defined the first time they appear,
+both in the abstract and in the rest of the paper.
+
+\section{STYLES}
+
+Table~\ref{tab:styles} summarizes the fonts and spacing used in the styles of
+a JACoW template. In \LaTeX, these
+are implemented in the ‘jacow’ class file.
+
+\section{PAGE NUMBERS}
+
+\textbf{DO NOT include any page numbers}. They will be added
+when the final proceedings are produced.
+
+\section{TEMPLATES}
+
+Template documents for the recommended word processing
+software are available from the JACoW website~\cite{jacow-help}
+and exist for \LaTeX, Microsoft Word (Mac and PC)
+and LibreOffice/Apache OpenOffice for US letter and A4
+paper sizes. Use the correct template for your paper size and
+platform.
+
+Fonts are embedded by default with pdf\LaTeX. Using \LaTeX{} with `dvips',
+make sure that `ps2pdf' has the option \texttt{-dEmbedAllFonts=true}'.
+Fonts of included figure graphics in PDF or EPS are often not embedded.
+So make sure that this done when generating them or reprocess them
+in `Ghostscript' with the switch \texttt{-dEmbedAllFonts=true}' set.
+
+\flushcolsend
+
+\section{CHECKLIST FOR ELECTRONIC PUBLICATION}
+Authors are requested to go over the following checklist for electronic publication:
+\begin{Itemize}
+ \item Use only Times or Times New Roman (standard, bold or italic) and Symbol
+ fonts for text, \SI{10}{pt} except references, which should be \SI{9}{pt}.
+
+ \item Figures should use Times or Times New Roman (standard, bold or italic) and
+ Symbol fonts when possible---\SI{6}{pt} minimum, with fonts embedded.
+ \item Check that citations to references appear in sequential order and
+ that all references are cited.
+ \item Check that the PDF file prints correctly.
+ \item Check that there are no page numbers.
+ \item Check that the margins on the printed version are within \SI{\pm1}{mm}
+ of the specifications.
+ \item \LaTeX{} users can check their margins by invoking the
+ \texttt{boxit} option.
+\end{Itemize}
+
+Please also check the list of common oversights which can be found in \textbf{ANNEX C}.
+
+\section{CONCLUSION}
+
+Any conclusions should be in a separate section directly preceding
+the \textbf{ACKNOWLEDGEMENTS}, \textbf{APPENDIX}, or \textbf{REFERENCES} sections, in that
+order.
+
+\section{ACKNOWLEDGEMENTS}
+Any acknowledgement should be in a separate section directly preceding
+the \textbf{REFERENCES} or \textbf{APPENDIX} section.
+
+
+\section{APPENDIX}
+Any appendix should be in a separate section directly preceding
+the \textbf{REFERENCES} section. If there is no \textbf{REFERENCES} section,
+this should be the last section of the paper.
+
+%
+% only for "biblatex"
+%
+\ifboolexpr{bool{jacowbiblatex}}%
+ {\printbibliography}%
+ {%
+ % "biblatex" is not used, go the "manual" way
+
+ %\begin{thebibliography}{99} % Use for 10-99 references
+ \begin{thebibliography}{9} % Use for 1-9 references
+
+ \bibitem{jacow-help}
+ JACoW,
+ \url{http://www.jacow.org}
+
+ \bibitem{IEEE}
+ \textit{IEEE Editorial Style Manual},
+ IEEE Periodicals, Piscataway,
+ NJ, USA, Oct. 2014, pp. 34--52.
+ \end{thebibliography}
+
+} % end \ifboolexpr
+%
+% for use as JACoW template the inclusion of the ANNEX parts have been commented out
+% to generate the complete documentation please remove the "%" of the next two commands
+%
+%\newpage
+
+%\include{annexes-A4}
+
+\end{document}
Property changes on: trunk/Master/texmf-dist/doc/latex/jacow/JACoW_A4_LaTeX.tex
___________________________________________________________________
Added: svn:eol-style
## -0,0 +1 ##
+native
\ No newline at end of property
Added: trunk/Master/texmf-dist/doc/latex/jacow/JACoW_US_LaTeX.pdf
===================================================================
(Binary files differ)
Index: trunk/Master/texmf-dist/doc/latex/jacow/JACoW_US_LaTeX.pdf
===================================================================
--- trunk/Master/texmf-dist/doc/latex/jacow/JACoW_US_LaTeX.pdf 2018-04-04 20:17:27 UTC (rev 47286)
+++ trunk/Master/texmf-dist/doc/latex/jacow/JACoW_US_LaTeX.pdf 2018-04-04 20:17:44 UTC (rev 47287)
Property changes on: trunk/Master/texmf-dist/doc/latex/jacow/JACoW_US_LaTeX.pdf
___________________________________________________________________
Added: svn:mime-type
## -0,0 +1 ##
+application/pdf
\ No newline at end of property
Added: trunk/Master/texmf-dist/doc/latex/jacow/JACoW_US_LaTeX.tex
===================================================================
--- trunk/Master/texmf-dist/doc/latex/jacow/JACoW_US_LaTeX.tex (rev 0)
+++ trunk/Master/texmf-dist/doc/latex/jacow/JACoW_US_LaTeX.tex 2018-04-04 20:17:44 UTC (rev 47287)
@@ -0,0 +1,470 @@
+\documentclass[letter, %
+ %boxit, % check whether paper is inside correct margins
+ %titlepage, % separate title page
+ %refpage % separate references
+ %biblatex, % biblatex is used
+ keeplastbox, % flushend option: not to un-indent last line in References
+ %nospread, % flushend option: do not fill with whitespace to balance columns
+ %hyphens, % allow \url to hyphenate at "-" (hyphens)
+ %xetex, % use XeLaTeX to process the file
+ %luatex, % use LuaLaTeX to process the file
+ ]{jacow}
+%
+% ONLY FOR \footnote in table/tabular
+%
+\usepackage{pdfpages,multirow,ragged2e} %
+%
+% CHANGE SEQUENCE OF GRAPHICS EXTENSION TO BE EMBEDDED
+% ----------------------------------------------------
+% test for XeTeX where the sequence is by default eps-> pdf, jpg, png, pdf, ...
+% and the JACoW template provides JACpic2v3.eps and JACpic2v3.jpg which
+% might generates errors, therefore PNG and JPG first
+%
+\makeatletter%
+ \ifboolexpr{bool{xetex}}
+ {\renewcommand{\Gin at extensions}{.pdf,%
+ .png,.jpg,.bmp,.pict,.tif,.psd,.mac,.sga,.tga,.gif,%
+ .eps,.ps,%
+ }}{}
+\makeatother
+
+% CHECK FOR XeTeX/LuaTeX BEFORE DEFINING AN INPUT ENCODING
+% --------------------------------------------------------
+% utf8 is default for XeTeX/LuaTeX
+% utf8 in LaTeX only realises a small portion of codes
+%
+\ifboolexpr{bool{xetex} or bool{luatex}} % test for XeTeX/LuaTeX
+ {} % input encoding is utf8 by default
+ {\usepackage[utf8]{inputenc}} % switch to utf8
+
+\usepackage[USenglish]{babel}
+
+
+%
+% if BibLaTeX is used
+%
+\ifboolexpr{bool{jacowbiblatex}}%
+ {%
+ \addbibresource{jacow-test.bib}
+ \addbibresource{biblatex-examples.bib}
+ }{}
+\listfiles
+
+%%
+%% Lengths for the spaces in the title
+%% \setlength\titleblockstartskip{..} %before title, default 3pt
+%% \setlength\titleblockmiddleskip{..} %between title + author, default 1em
+%% \setlength\titleblockendskip{..} %afterauthor, default 1em
+
+\begin{document}
+
+\title{preparation OF papers for \NoCaseChange{JACoW} conferences\thanks{Work supported by ...}}
+
+\author{A. N. Author\thanks{email address}, H. Coauthor, Name of Institute or Affiliation, [Postal Code] City, Country \\
+ P. Contributor\textsuperscript{1}, Name of Institute or Affiliation, [Postal Code] City, Country \\
+ \textsuperscript{1}also at Name of Secondary Institute or Affiliation, [Postal Code] City, Country}
+
+\maketitle
+
+%
+\begin{abstract}
+ Many conference series have adopted the same standards
+ for electronic publication and have joined the Joint
+ Accelerator Conferences Website (JACoW) collaboration
+ for the publication of their proceedings. This document
+ describes the common requirements for the submission of
+ papers to these conferences. Please consult individual
+ conference information for page limits, method of electronic
+ submission, etc. It is not intended that this should
+ be a tutorial in word processing; the aim is to explain the
+ particular requirements for electronic publication at
+ www.JACoW.org. The abstract itself is to act as a standalone
+ entity and, as such, should not include citations. Any acronyms
+ should be expanded on their first occurrence, both in the
+ abstract and in the rest of the paper.
+ The abstract itself is to act as a standalone entity and,
+ as such, should not include citations. Any acronyms should
+ be expanded on their first occurrence, both in the abstract
+ and in the rest of the paper.
+\end{abstract}
+
+
+\section{SUBMISSION OF PAPERS}
+Each author should submit the PDF file and all source
+files (text and figures) to enable the paper to be
+reconstructed if there are processing difficulties.
+
+\section{MANUSCRIPTS}
+Templates are provided for recommended software and
+authors are advised to use them. Please consult the
+individual conference help pages if questions arise.
+
+\subsection{General Layout}
+
+These instructions are a typical implementation of the
+requirements. Manuscripts should have:
+\begin{Itemize}
+ \item Either A4 (\SI{21.0}{cm}~$\times$~\SI{29.7}{cm}; \SI{8.27}{in}~$\times$~\SI{11.69}{in}) or US
+ letter size (\SI{21.6}{cm}~$\times$~\SI{27.9}{cm}; \SI{8.5}{in}~$\times$~\SI{11.0}{in}) paper.
+ \item Single-spaced text in two columns of \SI{82.5}{mm} (\SI{3.25}{in}) with \SI{5.3}{mm}
+ (\SI{0.2}{in}) separation. More recent versions of Microsoft Word have a default spacing of 1.5 lines;
+ authors must change this to 1 line.
+ \item The text located within the margins specified in Table~\ref{l2ea4-t1}.
+\end{Itemize}
+\begin{table}[!hbt]
+% \vspace*{-.5\baselineskip}
+ \centering
+ \caption{Margin Specifications}
+ \begin{tabular}{lcc}
+ \toprule
+ \textbf{Margin} & \textbf{A4 Paper} & \textbf{US Letter Paper} \\
+ \midrule
+ Top & \SI{37}{mm} (\SI{1.46}{in}) & \SI{0.75}{in} (\SI{19}{mm}) \\ %[3pt]
+ Bottom & \SI{19}{mm} (\SI{0.75}{in}) & \SI{0.75}{in} (\SI{19}{mm}) \\ %[3pt]
+ Left & \SI{20}{mm} (\SI{0.79}{in}) & \SI{0.79}{in} (\SI{20}{mm}) \\ %[3pt]
+ Right & \SI{20}{mm} (\SI{0.79}{in}) & \SI{1.02}{in} (\SI{26}{mm}) \\
+ \bottomrule
+ \end{tabular}
+ \label{l2ea4-t1}
+% \vspace*{-\baselineskip}
+\end{table}
+
+\subsection{Fonts}
+
+In order to produce good Adobe Acrobat PDF files, authors
+using the `jacow' \LaTeX{} template are asked to use only the fonts
+defined in the ‘jacow’ class file (v2.2 of 2018/02/23) in standard,
+bold (i.\,e., \verb|\textbf|) or italic (i.\,e., \verb|\textit|) form and
+symbols from the standard set of fonts. In Word use only
+Symbol and, depending on your platform, Times or Times New Roman
+fonts in standard, bold or italic form.
+
+The layout of the text on the page is illustrated in
+Fig.~\ref{fig:paper_layout}. Note that the paper’s title and the author list should
+be the width of the full page. Tables and figures may span
+the whole \SI{170}{mm} page width, if desired (see Fig.~\ref{fig:jacow_team}), but
+if they span both columns, they should be placed at either
+the top or bottom of a page to ensure proper flow of the
+text (which should flow from top to bottom in each column
+and the numbering should be in sequence).
+
+\begin{figure}[!htb]
+ \centering
+ \includegraphics*[width=.7\columnwidth]{JACpic_mc}
+ \caption{Layout of papers.}
+ \label{fig:paper_layout}
+\end{figure}
+
+\begin{figure*}[!tbh]
+ \centering
+ \includegraphics*[width=\textwidth]{jacow2017}
+
+ \caption{Example of a full-width figure showing the JACoW Team at their annual
+ meeting in November 2017. This figure has a multi-line caption that has to be
+ justified rather than centered.}
+ \label{fig:jacow_team}
+\end{figure*}
+
+\subsection{Title and Author List}
+
+The title should use \SI{14}{pt} bold uppercase letters and be centered on the page.
+Individual letters may be lowercased to avoid misinterpretation (e.\,g., mW, GeV, SPRing-8, SwissFEL).
+To include a funding support statement, put an asterisk after the title and
+the support text at the bottom of the first column on page~1---in Word,
+use a text box; in \LaTeX, use $\backslash$\texttt{thanks}. See also the
+subsection on footnotes.
+
+The names of authors, their organizations/affiliations and
+postal addresses should be grouped by affiliation and
+listed in \SI{12}{pt} upper- and lowercase letters. The name of
+the submitting or primary author should be first, followed
+by the coauthors, alphabetically by affiliation. Where
+authors have multiple affiliations, the secondary affiliation
+may be indicated with a superscript, as shown in the
+author listing of this paper. See \textbf{ANNEX~A} for further examples.
+
+\subsection{Section Headings}
+
+Section headings should not be numbered. They should
+use \SI{12}{pt} bold uppercase letters and be centered in the
+column. All section headings should appear directly above
+the text---there should never be a column break between a heading and the
+following paragraph.
+
+\subsection{Subsection Headings}
+
+Subsection headings should not be numbered.
+They should use \SI{12}{pt} italic letters and be left aligned in the column.
+Subsection headings use Title Case (or Initial Caps)
+and should appear directly above the text---there should never be a column break
+between a subheading and the following paragraph.
+
+\subsubsection{Third-level Headings} These should use \SI{10}{pt} bold
+letters and be run into the paragraph text. In \LaTeX{} these headings are
+created with \LaTeX's \verb|\subsubsection| command.
+In the Word templates authors must bold the heading text themselves.
+This heading should be used sparingly. See Table~\ref{tab:styles}
+for its style details.
+
+\subsection{Paragraph Text}
+
+Paragraphs should use \SI{10}{pt} font and be justified (touch each side) in
+the column. The beginning of each paragraph should be indented
+approximately \SI{0.33}{cm} (\SI{0.13}{in}). The last line of a paragraph should not be
+printed by itself at the beginning of a column nor should the first line of
+a paragraph be printed by itself at the end of a column.
+
+\subsection{Figures, Tables, and Equations}
+
+Place figures and tables as close to their place of mention as
+possible. Lettering in figures and tables should be large enough to
+reproduce clearly. Use of non-approved fonts in figures can lead to
+problems when the files are processed. \LaTeX{} users should be sure to use
+non-bitmapped versions of Computer Modern fonts in equations (Type\,1 PostScript
+or OpenType fonts are required. Their use is described in the help
+pages of the JACoW website\cite{jacow-help}).
+
+Each figure and table must be numbered in ascending
+order (1, 2, 3, etc.) throughout the paper.
+Figure captions are placed below figures, and table
+captions are placed above tables.
+
+Figure captions are formatted as shown in Figs.~\ref{fig:paper_layout} and \ref{fig:jacow_team},
+while table captions take the form of a heading,
+with initial letters of principle words, capitalized, and
+without a period at the end (see Tables~\ref{eq:units} and \ref{tab:styles}).
+Any reference to the contents of the table should be made from
+the body of the paper rather than from within the table
+caption itself.
+
+Single-line captions are centered in the column, while captions
+that span more than one line should be justified.
+The \LaTeX{} template uses the ‘booktabs’ package to
+format tables.
+
+When referring to a figure from within the text, the
+convention is to use the abbreviated form [e.\,g., Fig.~1]
+\emph{unless} the reference is at the start of the sentence, in
+which case “Figure” is written in full. Reference to a
+table, however, is never abbreviated [e.\,g., Table~1].
+
+
+If a displayed equation needs a number (i.\,e., it will be
+referenced), place it in parentheses, and flush with the
+right margin of the column. The equation itself should be
+indented and centered, as far as is possible:
+\begin{equation}\label{eq:units}
+ C_B=\frac{q^3}{3\epsilon_{0} mc}=\SI{3.54}{\micro eV/T}
+\end{equation}
+
+When referencing a numbered equation, use the word
+“Equation” at the start of a sentence, and the abbreviated
+form, “Eq.”, if in the text. The equation number is placed
+in parentheses [e.g., Eq. (1)].
+
+\subsection{Units}
+
+Units should be written using the standard, roman font,
+not the italic font, as shown in Eq.~(\ref{eq:units}).
+An unbreakable space should precede a unit (in \LaTeX{} use a “\verb|\,|”,
+the template uses the ‘siunitx’ package to format units).
+Some examples are: \SI{3}{keV},
+\SI{100}{kW}, \SI{7}{µm}. When a unit appears in a hyphenated,
+compound adjective that precedes a noun, it takes on the
+singular form, e.\,g., the 3.8-metre long undulator.
+
+\subsection{References}
+%
+% References examples given here are not formatted using \cite as there
+% are only reference numbers [1] and [2] in the template
+%
+All bibliographical and web references should be numbered and listed at the
+end of the paper in a section called \textbf{REFERENCES}. When citing a
+reference in the text, place the corresponding reference number in square
+brackets~[1]. The reference citations in the text should be numbered
+in ascending order. Multiple citations should appear in
+the same bracket~[3, 4] and
+with ranges where appropriate~[1--4, 10].
+
+A URL or DOI may be included as part of a reference, but its
+hyperlink should NOT be added. The usual practice is to
+use a monospace font for the URL so as to help distinguish
+it from normal text. In \LaTeX{} the ‘url’ package is used.
+
+For authors to properly cite the resources used when researching
+their papers is an obligation. In the interest of
+promoting uniformity and complete citations, the IEEE
+Editorial Style for Transactions and Journals, which itself
+adheres to the Chicago Manual of Style, has been
+adopted~\cite{IEEE}. Please consult the appended material, \textbf{ANNEX~B},
+for details. The onus is on authors to pay attention to
+the details of the said style to ensure complete, accurate
+and properly formatted references.
+
+ \begin{table}[h!b]
+ \setlength\tabcolsep{3.5pt}
+ \centering
+ \caption{Summary of Styles}
+ \label{tab:styles}
+ % \begin{tabular}{p{60pt}p{90pt}cc}
+ \begin{tabular}{llcc}
+ \toprule
+ \textbf{Style} & \textbf{Font} & \textbf{Space} & \textbf{Space} \\
+ & & \textbf{Before} & \textbf{After} \\
+ \midrule
+ \textbf{PAPER} & \SI{14}{pt} & \SI{0}{pt} & \SI{3}{pt} \\
+ \textbf{TITLE} & \textbf{UPPERCASE} & & \\
+ & \textbf{EXCEPT FOR} & & \\
+ & \textbf{REQUIRED lowercase} & & \\
+ & \textbf{letters} & & \\
+ & \textbf{Bold} & & \\[5pt]
+ %\midrule
+ Author list & \SI{12}{pt} & \SI{9}{pt} & \SI{12}{pt} \\
+ & UPPER- and lowercase & & \\[5pt]
+ %\midrule
+ \textit{Abstract} & \SI{12}{pt} & \SI{0}{pt} & \SI{3}{pt} \\
+ \textit{Title} & \textit{Initial Caps} & & \\
+ & \textit{Italic} & & \\[5pt]
+ %\midrule
+ \textbf{Section} & \SI{12}{pt} & \SI{9}{pt} & \SI{3}{pt} \\
+ \textbf{Heading} & \textbf{UPPERCASE} & & \\
+ & \textbf{bold} & & \\[5pt]
+ %\midrule
+ \textit{Subsection} & \SI{12}{pt} & \SI{6}{pt} & \SI{3}{pt} \\
+ \textit{Heading}
+ & \textit{Initial Caps} & & \\
+ & \textit{Italic} & & \\[5pt]
+ %\midrule
+ \textbf{Third-level} & \SI{10}{pt} & \SI{6}{pt} & \SI{0}{pt} \\
+ \textbf{Heading}
+ & \textbf{Initial Caps} & & \\
+ & \textbf{Bold} & & \\[5pt]
+ %\midrule
+ Figure & \SI{10}{pt} & \SI{3}{pt} & $\ge$\SI{3}{pt} \\
+ Captions & & & \\[5pt]
+ %\midrule
+ Table & \SI{10}{pt} & $\ge$\SI{3}{pt} & \SI{3}{pt} \\
+ Captions & & & \\[5pt]
+ %\midrule
+ Equations & \SI{10}{pt} base font & $\ge$\SI{6}{pt} & $\ge$\SI{6}{pt} \\[5pt]
+ %\midrule
+ References & \SI{9}{pt} & \SI{0}{pt} & \SI{3}{pt} \\
+ when $\le9$ & \verb|\bibliography{9}| & & \\[5pt]
+ Refs. $\ge10$ & \SI{9}{pt} & \SI{0}{pt} & \SI{3}{pt} \\
+ & \verb|\bibliography{99}| & & \\
+ \bottomrule %\SI{0.25}{in}
+ \end{tabular}
+\end{table}
+
+\subsection{Footnotes}
+
+Footnotes on the title and author lines may be used for acknowledgements
+and e-mail addresses. A non-numeric sequence of characters (*, \#,
+\dag, \ddag, \P) should be used to indicate the footnote.
+These “pseudo footnotes” should only
+appear at the bottom of the first column on the first page.
+
+Any other footnote in the body of the paper should
+use the normal numeric sequencing (i.\,e., 1, 2, 3)
+and appear at the bottom of the same column in which
+it is used. All footnotes are of 8pt font size.
+
+\subsection{Acronyms}
+
+Acronyms should be defined the first time they appear,
+both in the abstract and in the rest of the paper.
+
+\section{STYLES}
+
+Table~\ref{tab:styles} summarizes the fonts and spacing used in the styles of
+a JACoW template. In \LaTeX, these
+are implemented in the ‘jacow’ class file.
+
+\section{PAGE NUMBERS}
+
+\textbf{DO NOT include any page numbers}. They will be added
+when the final proceedings are produced.
+
+\section{TEMPLATES}
+
+Template documents for the recommended word processing
+software are available from the JACoW website~\cite{jacow-help}
+and exist for \LaTeX, Microsoft Word (Mac and PC)
+and LibreOffice/Apache OpenOffice for US letter and A4
+paper sizes. Use the correct template for your paper size and
+platform.
+
+Fonts are embedded by default with pdf\LaTeX. Using \LaTeX{} with `dvips',
+make sure that `ps2pdf' has the option \texttt{-dEmbedAllFonts=true}'.
+Fonts of included figure graphics in PDF or EPS are often not embedded.
+So make sure that this done when generating them or reprocess them
+in `Ghostscript' with the switch \texttt{-dEmbedAllFonts=true}' set.
+
+\flushcolsend
+
+\section{CHECKLIST FOR ELECTRONIC PUBLICATION}
+Authors are requested to go over the following checklist for electronic publication:
+\begin{Itemize}
+ \item Use only Times or Times New Roman (standard, bold or italic) and Symbol
+ fonts for text, \SI{10}{pt} except references, which should be \SI{9}{pt}.
+
+ \item Figures should use Times or Times New Roman (standard, bold or italic) and
+ Symbol fonts when possible---\SI{6}{pt} minimum, with fonts embedded.
+ \item Check that citations to references appear in sequential order and
+ that all references are cited.
+ \item Check that the PDF file prints correctly.
+ \item Check that there are no page numbers.
+ \item Check that the margins on the printed version are within \SI{\pm1}{mm}
+ of the specifications.
+ \item \LaTeX{} users can check their margins by invoking the
+ \texttt{boxit} option.
+\end{Itemize}
+
+Please also check the list of common oversights which can be found in \textbf{ANNEX C}.
+
+\section{CONCLUSION}
+
+Any conclusions should be in a separate section directly preceding
+the \textbf{ACKNOWLEDGEMENTS}, \textbf{APPENDIX}, or \textbf{REFERENCES} sections, in that
+order.
+
+\section{ACKNOWLEDGEMENTS}
+Any acknowledgement should be in a separate section directly preceding
+the \textbf{REFERENCES} or \textbf{APPENDIX} section.
+
+
+\section{APPENDIX}
+Any appendix should be in a separate section directly preceding
+the \textbf{REFERENCES} section. If there is no \textbf{REFERENCES} section,
+this should be the last section of the paper.
+
+% only for "biblatex"
+\ifboolexpr{bool{jacowbiblatex}}%
+ {\printbibliography}%
+ {%
+ % "biblatex" is not used, go the "manual" way
+
+ %\begin{thebibliography}{99} % Use for 10-99 references
+ \begin{thebibliography}{9} % Use for 1-9 references
+
+ \bibitem{jacow-help}
+ JACoW,
+ \url{http://www.jacow.org}
+
+ \bibitem{IEEE}
+ \textit{IEEE Editorial Style Manual},
+ IEEE Periodicals, Piscataway,
+ NJ, USA, Oct. 2014, pp. 34--52.
+ \end{thebibliography}
+
+} % end \ifboolexpr
+
+%
+% for use as JACoW template the inclusion of the ANNEX parts have been commented out
+% to generate the complete documentation please remove the "%" of the next two commands
+%
+%\newpage
+
+%\include{annexes-A4}
+
+\end{document}
Property changes on: trunk/Master/texmf-dist/doc/latex/jacow/JACoW_US_LaTeX.tex
___________________________________________________________________
Added: svn:eol-style
## -0,0 +1 ##
+native
\ No newline at end of property
Deleted: trunk/Master/texmf-dist/doc/latex/jacow/JACpic2v5.png
===================================================================
(Binary files differ)
Deleted: trunk/Master/texmf-dist/doc/latex/jacow/LaTeX-A4-JACoW.pdf
===================================================================
(Binary files differ)
Deleted: trunk/Master/texmf-dist/doc/latex/jacow/LaTeX-A4-JACoW.tex
===================================================================
--- trunk/Master/texmf-dist/doc/latex/jacow/LaTeX-A4-JACoW.tex 2018-04-04 20:17:27 UTC (rev 47286)
+++ trunk/Master/texmf-dist/doc/latex/jacow/LaTeX-A4-JACoW.tex 2018-04-04 20:17:44 UTC (rev 47287)
@@ -1,1058 +0,0 @@
-\documentclass[a4paper,
- %boxit,
- %titlepage, % separate title page
- %refpage % separate references
- ]{jacow}
-%
-% CHANGE SEQUENCE OF GRAPHICS EXTENSION TO BE EMBEDDED
-% ----------------------------------------------------
-% test for XeTeX where the sequence is by default eps-> pdf, jpg, png, pdf, ...
-% and the JACoW template provides JACpic2v3.eps and JACpic2v3.jpg which
-% might generates errors, therefore PNG and JPG first
-%
-\makeatletter%
- \ifboolexpr{bool{xetex}}
- {\renewcommand{\Gin at extensions}{.pdf,%
- .png,.jpg,.bmp,.pict,.tif,.psd,.mac,.sga,.tga,.gif,%
- .eps,.ps,%
- }}{}
-\makeatother
-
-% CHECK FOR XeTeX/LuaTeX BEFORE DEFINING AN INPUT ENCODING
-% --------------------------------------------------------
-% utf8 is default for XeTeX/LuaTeX
-% utf8 in LaTeX only realises a small portion of codes
-%
-\ifboolexpr{bool{xetex} or bool{luatex}} % test for XeTeX/LuaTeX
- {} % input encoding is utf8 by default
- {\usepackage[utf8]{inputenc}} % switch to utf8
-
-\usepackage[USenglish]{babel}
-
-\usepackage[final]{pdfpages}
-\usepackage{multirow}
-\usepackage{ragged2e}
-
-%
-% if BibLaTeX is used
-%
-\ifboolexpr{bool{jacowbiblatex}}%
- {%
- \addbibresource{jacow-test.bib}
- \addbibresource{biblatex-examples.bib}
- }{}
-\listfiles
-
-%
-% command for typesetting a \section like word
-%
-\newcommand\SEC[1]{\textbf{\uppercase{#1}}}
-
-%%
-%% Lengths for the spaces in the title
-%% \setlength\titleblockstartskip{..} %before title, default 3pt
-%% \setlength\titleblockmiddleskip{..} %between title + author, default 1em
-%% \setlength\titleblockendskip{..} %afterauthor, default 1em
-
-%\copyrightspace %default 1cm. arbitrary size with e.g. \copyrightspace[2cm]
-
-% testing to fill the copyright space
-%\usepackage{eso-pic}
-%\AddToShipoutPictureFG*{\AtTextLowerLeft{\textcolor{red}{COPYRIGHTSPACE}}}
-
-\begin{document}
-
-\title{preparation OF papers for \NoCaseChange{JACoW} conferences\thanks{Work supported by ...}}
-
-\author{A. N. Author\thanks{email address}, H. Co-author, Name of Institute or Affiliation, City, Country \\
- P. Contributor\textsuperscript{1}, Name of Institute or Affiliation, City, Country \\
- \textsuperscript{1}also at Name of Secondary Institute or Affiliation, City, Country}
-
-\maketitle
-
-%
-\begin{abstract}
- Many conference series have adopted the same standards
- for electronic publication and have joined the Joint
- Accelerator Conferences Website (JACoW) collaboration
- for the publication of their proceedings. This document
- describes the common requirements for the submission of
- papers to these conferences. Please consult individual
- conference information for page limits, method of electronic
- submission, etc. It is not intended that this should
- be a tutorial in word processing; the aim is to explain the
- particular requirements for electronic publication at
- www.JACoW.org.
-\end{abstract}
-
-
-\section{SUBMISSION OF PAPERS}
-Each author should submit the PDF file and all source
-files (text and figures) to enable the paper to be
-reconstructed if there are processing difficulties.
-
-\section{Manuscripts}
-Templates are provided for recommended software and
-authors are advised to use them. Please consult the
-individual conference help pages if questions arise.
-
-\subsection{General Layout}
-
-These instructions are a typical implementation of the
-requirements. Manuscripts should have:
-\begin{Itemize}
- \item Either A4 (\SI{21.0}{cm}~$\times$~\SI{29.7}{cm}; \SI{8.27}{in}~$\times$~\SI{11.69}{in}) or US
- letter size (\SI{21.6}{cm}~$\times$~\SI{27.9}{cm}; \SI{8.5}{in}~$\times$~\SI{11.0}{in}) paper.
- \item Single-spaced text in two columns of \SI{82.5}{mm} (\SI{3.25}{in}) with \SI{5.3}{mm}
- (\SI{0.2}{in}) separation. More recent versions of MSWord have a default spacing of 1.5 lines;
- authors must change this to 1 line.
- \item The text located within the margins specified in Table~\ref{l2ea4-t1}.
-\end{Itemize}
-\begin{table}[hbt]
-% \vspace*{-.5\baselineskip}
- \centering
- \caption{Margin Specifications}
- \begin{tabular}{lcc}
- \toprule
- \textbf{Margin} & \textbf{A4 Paper} & \textbf{US Letter Paper} \\
- \midrule
- Top & \SI{37}{mm} (\SI{1.46}{in}) & \SI{0.75}{in} (\SI{19}{mm}) \\ %[3pt]
- Bottom & \SI{19}{mm} (\SI{0.75}{in}) & \SI{0.75}{in} (\SI{19}{mm}) \\ %[3pt]
- Left & \SI{20}{mm} (\SI{0.79}{in}) & \SI{0.79}{in} (\SI{20}{mm}) \\ %[3pt]
- Right & \SI{20}{mm} (\SI{0.79}{in}) & \SI{1.02}{in} (\SI{26}{mm}) \\
- \bottomrule
- \end{tabular}
- \label{l2ea4-t1}
-% \vspace*{-\baselineskip}
-\end{table}
-
-\subsection{Fonts}
-
-In order to produce good Adobe Acrobat PDF files, authors
-using the LaTeX template are asked to use only the fonts
-defined in the class file in standard, bold (i.\,e. \verb|\textbf|)
-or italic (i.\,e., \verb|\textit|) form and
-symbols from the standard set of fonts. In Word use only
-Symbol and, depending on your platform, Times or Times New Roman
-fonts in standard, bold or italic form.
-
-The layout of the text on the page is illustrated in
-Fig.~\ref{l2ea4-f1}. Note that the paper’s title and the author list should
-be the width of the full page. Tables and figures may span
-the whole \SI{170}{mm} page width, if desired (see Fig.~\ref{l2ea4-f2}), but
-if they span both columns, they should be placed at either
-the top or bottom of a page to ensure proper flow of the
-text (Word templates only: the text should flow from top
-to bottom in each column).
-
-\begin{figure}[!htb]
-% \vspace*{-.5\baselineskip}
- \centering
- \includegraphics*[width=174pt]{JACpic_mc}
- \caption{Layout of papers.}
- \label{l2ea4-f1}
-% \vspace*{-\baselineskip}
-\end{figure}
-
-\begin{figure*}[!tbh]
- \centering
- \includegraphics*[width=\textwidth]{JACpic2v5}
-
- \caption{Example of a full-width figure showing the JACoW Team at their annual
- meeting in 2015. This figure has a multi-line caption that has to be
- justified rather than centred.}
- \label{l2ea4-f2}
-% \vspace*{-\baselineskip}
-\end{figure*}
-
-\subsection{Title and Author List}
-
-The title should use \SI{14}{pt} bold uppercase letters and be centred on the page.
-Individual letters may be lowercase to avoid misinterpretation (e.\,g., mW, MW, SPRing-8, SwissFEL).
-To include a funding support statement, put an asterisk after the title and
-the support text at the bottom of the first column on page~1---in Word,
-use a text box; in \LaTeX, use $\backslash$\texttt{thanks}. See also the
-subsection on footnotes.
-
-The names of authors, their organizations/affiliations and
-postal addresses should be grouped by affiliation and
-listed in \SI{12}{pt} upper- and lowercase letters. The name of
-the submitting or primary author should be first, followed
-by the co-authors, alphabetically by affiliation. Where
-authors have multiple affiliations, the secondary affiliation
-may be indicated with a superscript, as shown in the
-author listing of this paper. See \SEC{Annex~A} for further examples.
-
-\subsection{Section Headings}
-
-Section headings should not be numbered. They should
-use \SI{12}{pt} bold uppercase letters and be centred in the
-column. All section headings should appear directly above
-the text---there should never be a column break between a heading and the
-following paragraph.
-
-\subsection{Subsection Headings}
-
-Subsection headings should not be numbered.
-They should use \SI{12}{pt} italic letters and be left aligned in the column.
-Subsection headings use Title Case (or Initial Caps)
-and should appear directly above the text---there should never be a column break
-between a heading and the following paragraph.
-
-\subsubsection{Third-level Headings} These should use \SI{10}{pt} bold
-letters and be run into the paragraph text. In \LaTeX{} they are
-created with \LaTeX's \verb|\subsubsection|LaTeX’s command.
-In the Word templates authors must bold the heading text themselves.
-This heading should be used sparingly. See Table~\ref{style-tab}
-for its style details.
-
-\subsection{Paragraph Text}
-
-Paragraphs should use \SI{10}{pt} font and be justified (touch each side) in
-the column. The beginning of each paragraph should be indented
-approximately \SI{0.33}{cm} (\SI{0.13}{in}). The last line of a paragraph should not be
-printed by itself at the beginning of a column nor should the first line of
-a paragraph be printed by itself at the end of a column.
-
-\subsection{Figures, Tables and Equations}
-
-Place figures and tables as close to their place of mention as
-possible. Lettering in figures and tables should be large enough to
-reproduce clearly. Use of non-approved fonts in figures can lead to
-problems when the files are processed. \LaTeX\ users should be sure to use
-non-bitmapped versions of Computer Modern fonts in equations (Type\,1 PostScript
-or OpenType fonts are required, Their use is described in the JACoW help
-pages~\cite{jacow-help}).
-
-Each figure and table must be numbered in ascending
-order (1, 2, 3, etc.) throughout the paper. After inserting a
-figure in a Word document, click on the figure, right click
-on “Wrap Text”, and select the “In Line with Text” option.
-Figure captions are placed below figures, and table
-captions are placed above tables.
-
-Figure captions are formatted as shown in Figs.~\ref{l2ea4-f1} and \ref{l2ea4-f2},
-while table captions take the form of a heading,
-with initial letters of principle words, capitalised, and
-without a period at the end (see Tables~\ref{eq:units} and \ref{style-tab}).
-Any reference to the contents of the table should be made from
-the body of the paper rather than from within the table
-caption itself.
-
- Single-line captions are centered in the column, while captions
-that span more than one line should be justified.
-The \LaTeX\ template uses the ‘booktabs’ package to
-format tables.
-
-When referring to a figure from within the text, the
-convention is to use the abbreviated form [e.\,g., Fig.~1]
-unless the reference is at the start of the sentence, in
-which case “Figure” is written in full. Reference to a
-table, however, is never abbreviated [e.\,g., Table~1].
-
-
-If a displayed equation needs a number (i.\,e., it will be
-referenced), place it it in parentheses, and flush with the
-right margin of the column. The equation itself should be
-indented and centred, as far as is possible:
-\begin{equation}\label{eq:units}
- C_B=\frac{q^3}{3\epsilon_{0} mc}=\SI{3.54}{\micro eV/T}
-\end{equation}
-
-When referencing a numbered equation, use the word
-“Equation” at the start of a sentence, and the abbreviated
-form, “Eq.”, if in the text. The equation number is placed
-in parentheses [e.g., Eq. (1)].
-
-\subsection{Units}
-
-Units should be written using the standard, roman font,
-not the italic font, as shown in Eq.~(\ref{eq:units}).
-An unbreakable space should precede a unit (in \LaTeX\ use a “\verb|\,|”,
-the template uses the ‘siunits’ package to format units).
-Some examples are: \SI{3}{keV},
-\SI{100}{kW}, \SI{7}{µm}. When a unit appears in a hyphenated,
-compound adjective that precedes a noun, it takes on the
-singular form, e.\,g., the 3.8-metre long undulator.
-
-\subsection{References}
-%
-% References examples given here are not formatted using \cite as there
-% are only reference numbers [1] and [2] in the template
-%
-All bibliographical and web references should be numbered and listed at the
-end of the paper in a section called \SEC{References}. When citing a
-reference in the text, place the corresponding reference number in square
-brackets~[1]. The reference citations in the text should be numbered
-in ascending order. Multiple citations should appear in
-the same square bracket~[3, 4] and
-with ranges where appropriate~[1--4, 10].
-
-A URL may be included as part of a reference, but its
-hyperlink should NOT be added. The usual practice is to
-use a monospace font for the URL so as to help distinguish
-it from normal text. The Word template uses the
-Lucida Sans Typewriter font (size \SI{8}{pt}), while the ‘url’
-package in \LaTeX\ uses the Latin Modern Typewriter font.
-
-For authors to properly cite the resources used when researching
-their papers is an obligation. In the interest of
-promoting uniformity and complete citations, the IEEE
-Editorial Style for Transactions and Journals has been
-adopted~\cite{IEEE}. Please consult the appended material, \SEC{Annex~B},
-for details. The onus is on authors to pay attention to
-the details of the said style to ensure complete, accurate
-and properly formatted references.
-
-\subsection{Footnotes}
-
-Footnotes on the title and author lines may be used for acknowledgements,
-affiliations and e-mail addresses. A non-numeric sequence of characters (*, \#,
-\dag, \ddag) should be used.
-Word users---DO NOT use Word's footnote feature (\textbf{Insert}, \textbf{Footnote})
-to insert footnotes, as this will create formatting problems. Instead, insert
-the title or author footnotes manually in a text box at the bottom of the first column with a
-line at the top of the text box to separate the footnotes from the rest of
-the paper's text. The easiest way to do this is to copy the text box from
-the JACoW template and paste it into your own document.
-These “pseudo footnotes” in the text box should only
-appear at the bottom of the first column on the first page.
-
-Any other footnote in the body of the paper should
-use the normal numeric sequencing (i.\,e., 1, 2, 3)
-and appear at the bottom of the same column in which
-it is used.
-
-\subsection{Acronyms}
-
-Acronyms should be defined the first time they appear.
-
-\section{styles}
-
-Table~\ref{style-tab} summarises the fonts and spacings used in the styles of
-a JACoW template. In \LaTeX, these are implemented in the ‘jacow’ class file).
-
-\section{page numbers}
-
-\textbf{DO NOT include any page numbers}. They will be added
-when the final proceedings are produced.
-
-\begin{table}[h!t]
- \setlength\tabcolsep{3.5pt}
- \centering
- \caption{Summary of Styles}
- \label{style-tab}
- % \begin{tabular}{p{60pt}p{90pt}cc}
- \begin{tabular}{llcc}
- \toprule
- \textbf{Style} & \textbf{Font} & \textbf{Space} & \textbf{Space} \\
- & & \textbf{Before} & \textbf{After} \\
- \midrule
- \textbf{PAPER} & \SI{14}{pt} & \SI{0}{pt} & \SI{3}{pt} \\
- \textbf{TITLE} & \textbf{UPPERCASE} & & \\
- & \textbf{EXCEPT FOR} & & \\
- & \textbf{REQUIRED lowercase} & & \\
- & \textbf{letters} & & \\
- & \textbf{Bold} & & \\[5pt]
- %\midrule
- Author list & \SI{12}{pt} & \SI{9}{pt} & \SI{12}{pt} \\
- & UPPER- and lowercase & & \\[5pt]
- %\midrule
- \textit{Abstract} & \SI{12}{pt} & \SI{0}{pt} & \SI{3}{pt} \\
- \textit{Title} & \textit{Initial Caps} & & \\
- & \textit{Italic} & & \\[5pt]
- %\midrule
- \textbf{Section} & \SI{12}{pt} & \SI{9}{pt} & \SI{3}{pt} \\
- \textbf{Heading} & \textbf{UPPERCASE} & & \\
- & \textbf{bold} & & \\[5pt]
- %\midrule
- \textit{Subsection} & \SI{12}{pt} & \SI{6}{pt} & \SI{3}{pt} \\
- \textit{Heading} & \textit{Initial Caps} & & \\
- & \textit{Italic} & & \\[5pt]
- %\midrule
- \textbf{Third-level} & \SI{10}{pt} & \SI{6}{pt} & \SI{0}{pt} \\
- \textbf{Heading} & \textbf{Initial Caps} & & \\
- & \textbf{Bold} & & \\[5pt]
- %\midrule
- Figure & \SI{10}{pt} & \SI{3}{pt} & $\ge$\SI{3}{pt} \\
- Captions & & & \\[5pt]
- %\midrule
- Table & \SI{10}{pt} & $\ge$\SI{3}{pt} & \SI{3}{pt} \\
- Captions & & & \\[5pt]
- %\midrule
- Equations & \SI{10}{pt} base font & \SI{12}{pt} & \SI{12}{pt} \\[5pt]
- %\midrule
- References\footnotemark
- & \SI{9}{pt}, justified with & \SI{0}{pt} & \SI{0}{pt} \\
- & \SI{0.52}{cm} (\SI{0.2}{in}) hanging & & \\
- & indent & & \\
- \bottomrule %\SI{0.25}{in}
- \end{tabular}
-\end{table}
-\footnotetext{In the case of more than 9 references, to ensure their proper alignment,
- Refs. 1 to 9 only should also have a \SI{0.16}{cm} (\SI{0.06}{in}) left indent, while Refs. 10
- onwards should have their hanging indent increased to \SI{0.68}{cm} (\SI{0.26}{in}). Further
- information is given in \SEC{Annex~B}.}
-
-\section{templates}
-
-Template documents for the recommended word processing
-software are available from the JACoW website~\cite{jacow-help}
-and exist for \LaTeX, Microsoft Word (Mac and PC)
-and LibreOffice/Apache OpenOffice for US letter and A4
-paper sizes.
-
-Use the correct template for your paper size and version
-of Word. Do not transport Microsoft Word documents across
-platforms (e.\,g., Mac\,$\leftrightarrow$\,PC). To ensure
-that fonts are embedded in Word 2010 documents (PC), the
-“Embed fonts in file” option must be selected from within the
-Word Options$\rightarrow$Save window. Fonts are embedded by
-default when printing to PDF on MAC OSX.
-
-
-\section{checklist for electronic publication}
-
-\begin{Itemize}
- \item Use only Times or Times New Roman (standard, bold or italic) and Symbol
- fonts for text---\SI{10}{pt} minimum except references, which can be \SI{9}{pt} or \SI{10}{pt}.
- \item Figures should use Times or Times New Roman (standard, bold or italic) and
- Symbol fonts when possible---\SI{6}{pt} minimum.
- \item Check that citations to references appear in sequential order and
- that all references are cited.
- \item Check that the PDF file prints correctly.
- \item Check that there are no page numbers.
- \item Check that the margins on the printed version are within \SI{\pm1}{mm}
- of the specifications.
- \item \LaTeX\ users can check their margins by invoking the
- \texttt{boxit} option.
-\end{Itemize}
-
-\raggedend
-\newpage
-
-\section{Conclusion}
-
-Any conclusions should be in a separate section directly preceding
-the \SEC{Acknowledgement}, \SEC{Appendix}, or \SEC{References} sections, in that
-order.
-
-\section{acknowledgement}
-Any acknowledgement should be in a separate section directly preceding
-the \SEC{References} or \SEC{Appendix} section.
-
-
-\section{appendix}
-Any appendix should be in a separate section directly preceding
-the \SEC{References} section. If there is no \SEC{References} section,
-this should be the last section of the paper.
-
-\iffalse % only for "biblatex"
- \newpage
- \printbibliography
-
-% "biblatex" is not used, go the "manual" way
-\else
-
-%\begin{thebibliography}{99} % Use for 10-99 references
-\begin{thebibliography}{9} % Use for 1-9 references
-
-%\bibitem{accelconf-ref}
-% C. Petit-Jean-Genaz and J. Poole,
-% ``JACoW, A service to the Accelerator Community,''
-% EPAC'04, Lucerne, July 2004, THZCH03, p.~249,
-% \url{http://www.JACoW.org/e04/papers/THZCH03.PDF}
-
-\bibitem{jacow-help}
- JACoW,
- \url{http://www.jacow.org}
-
-\bibitem{IEEE}
- \textit{IEEE Editorial Style Manual},
- IEEE Periodicals, Piscataway,
- NJ, USA, Oct. 2014, pp. 34--52.
-\end{thebibliography}
-%\null % this is a hack for correcting the wrong un-indent by package 'flushend' in versions before 2015
-
-\fi
-
-\newpage
-
-\twocolumn[\vspace*{-1.8ex}\section{ANNEX A:\endgraf FORMATTING OF AUTHORS AND AFFILIATIONS}]
-
-The names of authors, their organizations/affiliations
-and postal addresses should be grouped by affiliation and
-listed in \SI{12}{pt} upper- and lowercase letters. The name of
-the submitting or primary author should be first, followed
-by the co-authors, alphabetically by affiliation. If the
-author list for a given affiliation spans multiple lines,
-please be sure to break the line in a manner that does not
-split the author’s initials from the author’s last name. This
-is easily done by placing unbreakable spaces between the
-initials and last name. The affiliation name and address
-are also best kept together on the same (but not necessarily
-separate) line, wherever possible. (See, for example,
-the entry for GSI in the following). In cases where authors
-have multiple affiliations, the secondary affiliation is
-inserted below the author/primary affiliation listing and is
-indicated with a superscript, as shown in the following. A
-spacing of \SI{3}{pt} is added to before the secondary affiliation.
-
-\newpage
-
-Footnotes on the title and author lines may be used for
-acknowledgements and e-mail addresses, using a nonnumeric
-sequence of characters (\textsuperscript{*}, \textsuperscript{†},
-\textsuperscript{‡}, \textsuperscript{§}, \textsuperscript{\#}). In Word,
-footnotes are best inserted manually in a text box at the
-bottom of the first column with a line at the top of the text
-box to separate the footnotes from the rest of the paper’s
-text.
-
-For examples of the preferred formatting of authors and
-affiliations, please consult the following list of JACoW
-collaboration members.
-
-For manuscripts submitted by large collaborations with
-potentially many tens of authors and where, additionally,
-there may be page number limitations, a format consisting
-of the principle author’s name and institute, followed by
-“on behalf of the … collaboration”, is preferred.
-
-
-\clearpage
-%
-% Include the title/author page of the JACoW Coolaboration
-%
-\includepdf[pages=-, noautoscale, pagecommand={}]{jacow-collaboration-2016.pdf}{}
-
-\clearpage
-
-\twocolumn[\vspace*{-1.8ex}\section{ANNEX B:\endgraf IEEE REFERENCE STYLE GUIDE AS APPLIED TO \NoCaseChange{JACoW}
- PAPERS, PERIODICALS AND OTHER WORKS}]
-
-
-\subsection{Referencing JACoW Proceedings}
-
-The format for published JACoW proceedings papers
-can be readily deduced from Refs. [1-3].
-
-\subsubsection{Author Listing} Careful attention should be given to the
-placing of commas and the use of ‘and’ in the author list.
-In particular, for the case of six or more authors
-(Ref. [3]), a comma also follows the penultimate author.
-The preference for ‘\emph{et al.}’\ takes precedence when the number
-of authors becomes large (e.g., $>$6).
-
-\subsubsection{Paper Title} As is modern practice in references, the title
-of the paper is written in sentence case, i.e., only the
-initial letter of the first word in the title is capitalised.
-Proper nouns, however, also have a capital. Capital letters
-appearing in acronyms likewise remain unaltered
-
-\subsubsection{Conference Proceedings} The proceedings title is written
-in title case in italics using standard abbreviations,
-such as Int. and Conf. The preposition, “in”, in normal
-font, precedes the proceedings title. The location,
-i.e., city, state (if USA), and country of the conference
-venue, the month (three-letter abbreviation) and the year
-the conference took place, is then listed. Finally, details
-pertaining to the paper itself, such as the conference paper
-ID and mandatory page numbers are given. The conference
-paper ID is optional, and may be included in the
-interest of facilitating a search through internet search
-engines. The complete or abbreviated form for citations,
-as shown in the following section, is recommended. The
-former is more informative to readers outside the immediate
-conference sphere. Both forms, however, ensure a
-proper import into digital libraries and information
-sources such as INSPIRE, Scopus, and Google Scholar.
-To this end, the minimal form is also listed for convenience.
-Although this form is not advocated, it nevertheless
-remains acceptable.
-
-Authors are also reminded to make a distinction between
-papers published in JACoW proceedings (which
-will always have page numbers) and those papers that
-may have been presented at past JACoW conferences but
-were not published [4]. References to contributions presented
-at the same conference should be written as shown
-in Ref. [5]; the wording “this conference” may be optionally
-appended.
-
-\subsection{Referencing Periodicals and Other Sources}
-
-The IEEE style is also shown for periodicals [6-11],
-online sources [12], books [13, 14], internal reports [15],
-theses [16], manuals or handbooks [17], patents [18] and
-unpublished material [19, 20]. Examples of correctly
-formatted references can be found at the JACoW website,
-under ‘Formatting Citations’ which is reached through the
-‘for Authors’ link.
-
-\subsection{Alignment of References}
-
-Entries to the References section follow a hanging indent
-structure. In this way, reference numbers in the first
-line of each reference entry are right aligned, while subsequent
-lines within a given reference are indented by a
-specified amount. The indentation values for Word are
-shown in Table~1 of this Annex and depend on whether
-the number of references exceeds single digit values.
-
-In the \LaTeX\ template, \verb|\bibliography{9}| is used for
-when the total number of references is less than ten. This
-should be changed to \verb|\bibliography{99}| if the number of
-references is ten or more.
-
-\begin{table}[h!t]
- \centering
- %\setlength\tabcolsep{3.5pt}
- \caption{Formatting of References}
- \label{format-refs}
- % \begin{tabular}{p{60pt}p{90pt}cc}
- \begin{tabular}{lllcc}
- \toprule
- \textbf{Font} & \textbf{Left} & \textbf{Hanging} & \textbf{Space} & \textbf{Space} \\
- & \textbf{Indent} & \textbf{Indent} & \textbf{Before} & \textbf{After} \\
- \midrule
- \multicolumn{5}{c}{\textbf{No. References $>$10}} \\[1mm]
- \SI{9}{pt}, & \SI{0.00}{cm} & \SI{0.52}{cm} & \multirow{2}{*}{\SI{0}{pt}}
- & \multirow{2}{*}{\SI{3}{pt}} \\
- justified & \SI{0.00}{in} & \SI{0.20}{in} & & \\
- \midrule
- \multicolumn{5}{c}{\textbf{No. References $\le$9}} \\
- \multicolumn{5}{l}{\textbf{Refs. 1 to 9}} \\[1mm]
- \SI{9}{pt}, & \SI{0.16}{cm} & \SI{0.52}{cm} & \multirow{2}{*}{\SI{0}{pt}}
- & \multirow{2}{*}{\SI{3}{pt}} \\
- justified & \SI{0.06}{in} & \SI{0.20}{in} & & \\[3mm] \multicolumn{5}{l}{\textbf{Refs. 10 onwards}} \\[1mm]
- \SI{9}{pt}, & \SI{0.00}{cm} & \SI{0.68}{cm} & \multirow{2}{*}{\SI{0}{pt}}
- & \multirow{2}{*}{\SI{3}{pt}} \\
- justified & \SI{0.00}{in} & \SI{0.26}{in} & & \\
- \bottomrule
- \end{tabular}
-\end{table}
-
-\patchcmd\thebibliography{\section*{REFERENCES\@mkboth {REFERENCES}{REFERENCES}}}{}{}{}
-\section{PAPER PUBLISHED IN A CONFERENCE PROCEEDINGS}
-
-\definecolor{jgreen}{cmyk}{0.81, 0.00, 0.97, 0.00}
-\definecolor{jred}{cmyk} {0.00, 0.99, 1.00, 0.00}
-\definecolor{jgrepc}{cmyk}{0.74, 0.05, 1.00, 0.00}
-\definecolor{jblue}{cmyk} {0.87, 0.54, 0.00, 0.00}
-\definecolor{jvio}{cmyk} {0.41, 0.82, 0.00, 0.00}
-\definecolor{jbook}{cmyk} {0.28, 0.88, 0.79, 0.25}
-\definecolor{jrept}{cmyk} {0.07, 0.70, 1.00, 0.00}
-\definecolor{jmanu}{cmyk} {0.28, 0.77, 1.00, 0.23}
-\definecolor{junpu}{cmyk} {0.00, 0.83, 0.65, 0.00}
-
-
-\subsection{Complete Form}
-
-%\begin{thebibliography}{99} % Use for 10-99 references
-\begin{thebibliography}{9} % Use for 1-9 references
-
- \bibitem{item:1-1}
- A.~Alpha and B.~T.~Beta, “An interesting paper”,
- in \textit{Proc. 1st Int. Particle Accelerator Conf. (IPAC’10)},
- Kyoto, Japan, May 2010,
- paper MOP057, pp. 567--569.\\
- \textcolor{jgreen}{[Conference Proceedings, two authors; optional paper ID]}
-
- \bibitem{item:1-2}
- A.~Alpha \emph{et al.},
- “A fascinating paper about FELs”,
- in \emph{Proc. 35th Int. Free-Electron Laser Conf. (FEL’13)},
- New York, NY, USA, Aug. 2013,
- paper WEP033, pp. 27--29.\\
- \textcolor{jgreen}{[Conference Proceedings, for six or more authors use \emph{et al.};
- paper ID is optional]}
-
- \bibitem{item:1-3}
- A.~Alpha, B.~T.~Beta, C.~Gamma, and D.~Delta,
- “An overview of control systems”,
- in \emph{Proc. 13th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS’11)}, Grenoble, France, Oct. 2011,
- paper TUP014, pp. 89--91.\\
- \textcolor{jgreen}{[Conference Proceedings, four authors; optional paper ID]}
-\end{thebibliography}
-
-\newpage
-\subsection{Abbreviated Form}
-
-\begin{thebibliography}{9} % Use for 1-9 references
- \bibitem{item:2-1}
- A.~Alpha and B.~T.~Beta, “An interesting paper”,
- in \textit{Proc. IPAC’10},
- Kyoto, Japan, May 2010,
- paper MOP057, pp. 567--569.\\
- \textcolor{jgreen}{[Conference Proceedings, two authors; optional paper ID]}
-
- \bibitem{item:2-2}
- A.~Alpha \emph{et al.},
- “A fascinating paper about FELs”,
- in \emph{Proc. FEL’13},
- New York, NY, USA, Aug. 2013,
- paper WEP033, pp. 27--29.\\
- \textcolor{jgreen}{[Conference Proceedings, for six or more authors use \emph{et al.};
- paper ID is optional]}
-
- \bibitem{item:2-3}
- A.~Alpha, B.~T.~Beta, C.~Gamma, and D.~Delta,
- “An overview of control systems”,
- in \emph{Proc. ICALEPCS’11}, Grenoble, France, Oct. 2011,
- paper TUP014, pp. 89--91.\\
- \textcolor{jgreen}{[Conference Proceedings, four authors; optional paper ID]}
-\end{thebibliography}
-
-\subsection{Minimal Form}
-
-\begin{thebibliography}{9} % Use for 1-9 references
-
- \bibitem{item:3-1}
- A.~Alpha and B.~T.~Beta,
- in \textit{Proc. IPAC’10},
- pp. 567--569.\\
- \textcolor{jgreen}{[Conference Proceedings, two authors]}
-
- \bibitem{item:3-2}
- A.~Alpha \emph{et al.},
- in \emph{Proc. FEL’13},
- pp. 27--29.\\
- \textcolor{jgreen}{[Conference Proceedings, for six or more authors use \emph{et al.}]}
-
- \bibitem{item:3-3}
- A.~Alpha, B.~T.~Beta, C.~Gamma, and D.~Delta,
- in \emph{Proc. ICALEPCS’11},
- pp. 89--91.\\
- \textcolor{jgreen}{[Conference Proceedings, four authors]}
-\end{thebibliography}
-
-\section{UNPUBLISHED PAPER PRESENTED AT A PREVIOUS CONFERENCE}
-
-\subsection{Complete Form}
-
-\begin{thebibliography}{9} % Use for 1-9 references
-\setcounter{enumi}{3}
- \bibitem{item:41}
- A.~Alpha and B.~T.~Beta,
- “An interesting talk”,
- presented at the 5th Int. Particle Accelerator Conf. (IPAC’14),
- Dresden, Germany, Jun. 2014, paper MOP057, unpublished.\\
- \textcolor{jred}{[Unpublished paper; conference name in normal font; paper
- ID may only be given if material supplementing the proceedings
- exists on the JACoW website, e.\,g., PDF of talk]}
-\end{thebibliography}
-
-\subsection{Abbreviated Form}
-
-\begin{thebibliography}{9} % Use for 1-9 references
-\setcounter{enumi}{3}
- \bibitem{item:42}
- A.~Alpha and B.~T.~Beta,
- “An interesting talk”,
- presented at IPAC’14,
- Dresden, Germany, Jun. 2014, paper MOP057, unpublished.\\
- \textcolor{jred}{[Unpublished paper; conference name in normal font; paper
- ID may only be given if material supplementing the proceedings
- exists on the JACoW website, e.\,g., PDF of talk]}
-\end{thebibliography}
-
-
-\section{PAPER PRESENTED AT THE CURRENT CONFERENCE}
-
-\subsection{Complete Form}
-
-\begin{thebibliography}{9} % Use for 1-9 references
-\setcounter{enumi}{4}
- \bibitem{item:51}
- A.~Alpha and B.~T.~Beta,
- “An interesting talk”,
- presented at the 7th Int. Particle Accelerator Conf. (IPAC’16),
- Busan, Korea, May 2016,
- paper MOAB01, this conference.\\
- \textcolor{jgrepc}{[Current conference; conference name in normal font; the
- wording “this conference” is optional]}
-\end{thebibliography}
-
-\subsection{Abbreviated Form}
-
-\begin{thebibliography}{9} % Use for 1-9 references
-\setcounter{enumi}{4}
- \bibitem{item:52}
- A.~Alpha and B.~T.~Beta,
- “An interesting talk”,
- presented at IPAC’16,
- Busan, Korea, May 2016,
- paper MOAB01, this conference.\\
- \textcolor{jgrepc}{[Current conference; conference name in normal font; the
- wording “this conference” is optional]}
-\end{thebibliography}
-
-
-\section{PAPER PUBLISHED IN, OR SUBMITTED TO, A PERIODICAL}
-
-\begin{thebibliography}{99} % Use for 1-9 references
- \setcounter{enumi}{5}
- \bibitem{item:6}
- P.~Mercury \emph{et al.},
- “Title of paper published in journal”,
- \emph{Phy. Rev. Lett.}, vol. 114, no. 5,
- p. 050511, Feb. 2014. \\
- \textcolor{jblue}{[Periodical, Phys. Rev. Lett.;
- issue no. and month may be omitted]}
-
- \bibitem{item:7}
- P.~Venus \emph{et al.},
- “New techniques in laser wakefield accelerators”,
- \emph{Phys. Rev. ST Accel. Beams}, vol. 18,
- p. 120198, Dec.~2015. \\
- \textcolor{jblue}{[Periodical, Phys. Rev. ST Accel. Beams;
- month may be omitted]}
-
- \bibitem{item:8}
- T.~Earth \emph{et al.},
- “Low dose irradiation impact on modern silicon detectors”,
- \emph{Nucl. Instr. Meth.}, vol. 692, pp. 256--280, 2014.
- \textcolor{jblue}{[Periodical, Nucl. Instr. Method.]}
-
- \bibitem{item:9}
- T.~Earth, L.~Moon, and A.~Belt,
- “Temporal correlations of x-ray free electron lasers”,
- \emph{Optics Express}, vol. 20, pp. 11396--11404, 2012.
- \textcolor{jblue}{[Periodical, Optics Express]}
-
- \bibitem{item:10}
- J.~B.~Good,
- “A paper accepted for publication”,
- \emph{Phys. Rev. Lett.}, to be published.
- \textcolor{jblue}{[Periodical, paper accepted for publication
- by Phys. Rev. Lett.]}
-
- \bibitem{item:11}
- G.~D.~Read,
- “Title of paper submitted for publication”,
- submitted for publication.
- \textcolor{jblue}{[Paper submitted for publication; the name of the
- periodical does not appear]}
-\end{thebibliography}
-
-\section{ONLINE SOURCE}
-
-\begin{thebibliography}{99} % Use for 1-9 references
- \setcounter{enumi}{11}
- \bibitem{item:121}
- JACoW, \url{http://www.jacow.org} \\
- \textcolor{jvio}{[online source; no hyperlink, no period at end of URL
- unless there is a trailing “/” as shown below. A monospace
- font, such as Lucida Sans Typewriter (size 8 pt), is used in
- Word, while the ‘url’ package in \LaTeX\ uses the Latin Modern Typewriter font]}
-
- \setcounter{enumi}{11}
- \bibitem{item:122}
- JACoW, \url{http://www.jacow.org/}. \\
- \textcolor{jvio}{[online source; no hyperlink, period after traling “/” in
- URL allowed. A monospace font, such as Lucida Sans Typewriter
- (size 8 pt), is used in Word, while the ‘url’ package in \LaTeX\
- uses the Latin Modern Typewriter font]}
-\end{thebibliography}
-
-\section{CITATIONS TO BOOKS}
-
-\begin{thebibliography}{99} % Use for 1-9 references
- \setcounter{enumi}{12}
- \bibitem{item:13}
- T.~Earth and L.~Moon,
- “Title of chapter in the book”,
- in \emph{Title of Book}, R Mars, Ed. New York, NY, USA:
- Wiley, 1994, pp.~42--48. \\
- \textcolor{jbook}{[Chapter in book]}
-
- \bibitem{item:14}
- A.~Belt, \emph{Title of Book}. Cambridge, MA, USA:
- MIT Press, 1986. \\
- \textcolor{jbook}{[Book]}
-\end{thebibliography}
-
-\section{REPORTS AND THESES}
-
-\begin{thebibliography}{99} % Use for 1-9 references
- \setcounter{enumi}{14}
- \bibitem{item:15}
- G. Jupiter \emph{et al.},
- “Title of report”, CERN, Geneva, Switzerland,
- Rep. CERN-2012-333, Oct. 2012.\\
- \textcolor{jrept}{[Report]}
-
- \bibitem{item:16}
- A.~Student, “Title of thesis”,
- Ph.D. thesis, Phys. Dept.,
- Karlsruher Institut für Technologie, Karlsruhe,
- Germany, 2014.\\
- \textcolor{jrept}{[Thesis]}
-\end{thebibliography}
-
-\newpage
-
-\section{MANUAL}
-
-\begin{thebibliography}{99} % Use for 1-9 references
- \setcounter{enumi}{16}
- \bibitem{item:17}
- \emph{IEEE Editorial Style Manual},
- IEEE Periodicals,
- Piscataway, NJ, USA, Oct. 2014, pp. 34-52;
- \url{http://www.ieee.org/documents/style_manual.pdf} \\
- \textcolor{jmanu}{[Handbook/Manual, no hyperlink, no period after URL]}
-\end{thebibliography}
-
-\section{PATENTS}
-
-\begin{thebibliography}{99} % Use for 1-9 references
- \setcounter{enumi}{17}
- \bibitem{item:18}
- A.~N.~Inventor,
- “Title of patent”,
- Patent Authority and No., Jan. 20, 2016.
-
-\end{thebibliography}
-
-\newpage
-
-\section{UNPUBLISHED WORK AND PRIVATE COMMUNICATION}
-
-\begin{thebibliography}{99} % Use for 1-9 references
- \setcounter{enumi}{18}
- \bibitem{item:19}
- P.~Neptune, “Title of paper”, unpublished.\\
- \textcolor{junpu}{[Unpublished]}
-
- \bibitem{item:20}
- P.~Uranus, private communication, Jun. 2015.\\
- \textcolor{junpu}{[Private communication]}
-
-\end{thebibliography}
-\null % this is a hack for correcting the wrong un-indent by package 'flushend' in versions before 2015
-
-\newpage
-
-\twocolumn[\vspace*{-1.8ex}\section{ANNEX C:\endgraf THE DILIGENT AUTHOR’S CHECKLIST}]
-
-\subsection{Common Oversights}
-
-In order to lessen the load on a small team of editors
-and to help expedite publication of the Proceedings, authors
-are kindly asked to give themselves an extra few
-minutes to go over the following points, which highlight
-the most common errors, before uploading their paper. By
-providing a properly formatted JACoW paper, the Proceedings
-Office is able to benefit from an autodistill process
-which automatically converts the author's PDF file
-into a version that adheres to the JACoW-compliant PDF
-standard. The process further ensures that all fonts required
-to view the entire document are embedded, rendering
-a final PDF that qualifies technically for publication.
-
-
-\subsection{Author and Affiliation Listing}
-
-The names of authors and their affiliations should be in
-\SI{12}{pt} uppercase and lowercase letters, with standard,
-roman fonts (i.\,e., not italics). When there is more than
-one author, the submitting author should be first, followed
-by the co-author. Co-authors should be grouped by affiliation
-and then be listed alphabetically. Please refer to \SEC{Annex~A}
-for further details and examples, particularly for
-the case where authors have multiple institutes.
-
-\subsection{Title, Abstract, and Author Listing in the SPMS}
-
-Authors are prompted to verify that the title, the abstract
-and the author/institute listing, previously submitted
-to the SPMS, has been updated to match that now appearing
-in the final manuscript. In particular, primary authors
-are reminded that it is their responsibility to check the
-accuracy of the co-authors entered in the SPMS database.
-These should be an exact match to that appearing in the
-paper. This is required to ensure the proper indexing of
-authors to papers in the published proceedings.
-
-\subsection{Subsection Headings}
-
-Subsection Headings use \SI{12}{pt} italic lowercase and uppercase.
-The initial letter of every principle word is capitalised,
-and the heading is left aligned in the column.
-
-\subsection{Figure Captions}
-
-Figure captions should be placed below the figure and
-centered if on one line, but justified if spanning two or
-more lines:
-\begin{center}
- Figure 1: A one line figure caption is centered.
-\end{center}
-\begin{justify}
- Figure 2: A lengthy figure caption that spans
- two lines is justified.
-\end{justify}
-Note the colon “:” after the figure number and the period
-“.” at the end of the caption.
-
-\newpage
-
-When referring to a figure from within the text, the
-convention is to use the abbreviated form, i.\,e., Fig.~1,
-unless the reference to the figure is at the start of the sentence:
-\begin{quote}
- Figure 1 shows a schematic view of...
-
- ... as shown in Fig.~1.
-\end{quote}
-
-\subsection{Table Headings}
-
-Table captions should be placed above the table and
-centered if on one line, but justified if spanning two or
-more lines:
-\begin{center}
- Table 1: Table Heading
-\end{center}
-\begin{justify}
- Table 2: A Particularly Long Table Heading
- Spanning Two Lines
-\end{justify}
-
-Note the colon ":" after the table number, that the initial
-letters of the principle words in the table heading are
-capitalised, and the absence of a period at the end of the
-caption.
-
-When referring to a table from within the text, the convention
-is NOT to abbreviate, i.\,e., Table 1.
-
-\subsection{Equations}
-
-If a displayed equation requires a number, it should be
-placed flush with the right margin of the column. Please
-leave sufficient space immediately before and after the
-equation, i.\,e., in Microsoft Word, \SI{12}{pt} before and after.
-
-\subsection{Units}
-
-An unbreakable space should always precede a unit. In \LaTeX\ use
-a “\verb|\,|” or the ‘siunits’ package to format units.
-Examples are:
-\SI{3}{keV}, \SI{4}{GeV}, \SI{100}{kW}, \SI{7}{µm}.
-
-\subsection{References}
-
-References are written in \SI{9}{pt} size and should be neatly
-presented in a consistent format with reference numbers
-aligned. Please refer to \SEC{Annex~B} for the preferred format
-and proper alignment.
-
-Please also ensure that references in the text are cited in
-sequential order.
-
-
-\end{document}
-
\ No newline at end of file
Deleted: trunk/Master/texmf-dist/doc/latex/jacow/LaTeX-Letter-JACoW.pdf
===================================================================
(Binary files differ)
Deleted: trunk/Master/texmf-dist/doc/latex/jacow/LaTeX-Letter-JACoW.tex
===================================================================
--- trunk/Master/texmf-dist/doc/latex/jacow/LaTeX-Letter-JACoW.tex 2018-04-04 20:17:27 UTC (rev 47286)
+++ trunk/Master/texmf-dist/doc/latex/jacow/LaTeX-Letter-JACoW.tex 2018-04-04 20:17:44 UTC (rev 47287)
@@ -1,1058 +0,0 @@
-\documentclass[letterpaper, %a4paper
- %boxit,
- %titlepage, % separate title page
- %refpage % separate references
- ]{jacow}
-%
-% CHANGE SEQUENCE OF GRAPHICS EXTENSION TO BE EMBEDDED
-% ----------------------------------------------------
-% test for XeTeX where the sequence is by default eps-> pdf, jpg, png, pdf, ...
-% and the JACoW template provides JACpic2v3.eps and JACpic2v3.jpg which
-% might generates errors, therefore PNG and JPG first
-%
-\makeatletter%
- \ifboolexpr{bool{xetex}}
- {\renewcommand{\Gin at extensions}{.pdf,%
- .png,.jpg,.bmp,.pict,.tif,.psd,.mac,.sga,.tga,.gif,%
- .eps,.ps,%
- }}{}
-\makeatother
-
-% CHECK FOR XeTeX/LuaTeX BEFORE DEFINING AN INPUT ENCODING
-% --------------------------------------------------------
-% utf8 is default for XeTeX/LuaTeX
-% utf8 in LaTeX only realizes a small portion of codes
-%
-\ifboolexpr{bool{xetex} or bool{luatex}} % test for XeTeX/LuaTeX
- {} % input encoding is utf8 by default
- {\usepackage[utf8]{inputenc}} % switch to utf8
-
-\usepackage[USenglish]{babel}
-
-\usepackage[final]{pdfpages}
-\usepackage{multirow}
-\usepackage{ragged2e}
-
-%
-% if BibLaTeX is used
-%
-\ifboolexpr{bool{jacowbiblatex}}%
- {%
- \addbibresource{jacow-test.bib}
- \addbibresource{biblatex-examples.bib}
- }{}
-\listfiles
-
-%
-% command for typesetting a \section like word
-%
-\newcommand\SEC[1]{\textbf{\uppercase{#1}}}
-
-%%
-%% Lengths for the spaces in the title
-%% \setlength\titleblockstartskip{..} %before title, default 3pt
-%% \setlength\titleblockmiddleskip{..} %between title + author, default 1em
-%% \setlength\titleblockendskip{..} %afterauthor, default 1em
-
-%\copyrightspace %default 1cm. arbitrary size with e.g. \copyrightspace[2cm]
-
-% testing to fill the copyright space
-%\usepackage{eso-pic}
-%\AddToShipoutPictureFG*{\AtTextLowerLeft{\textcolor{red}{COPYRIGHTSPACE}}}
-
-\begin{document}
-
-\title{preparation OF papers for \NoCaseChange{JACoW} conferences\thanks{Work supported by ...}}
-
-\author{A. N. Author\thanks{email address}, H. Co-author, Name of Institute or Affiliation, City, Country \\
- P. Contributor\textsuperscript{1}, Name of Institute or Affiliation, City, Country \\
- \textsuperscript{1}also at Name of Secondary Institute or Affiliation, City, Country}
-
-\maketitle
-
-%
-\begin{abstract}
- Many conference series have adopted the same standards
- for electronic publication and have joined the Joint
- Accelerator Conferences Website (JACoW) collaboration
- for the publication of their proceedings. This document
- describes the common requirements for the submission of
- papers to these conferences. Please consult individual
- conference information for page limits, method of electronic
- submission, etc. It is not intended that this should
- be a tutorial in word processing; the aim is to explain the
- particular requirements for electronic publication at
- www.JACoW.org.
-\end{abstract}
-
-
-\section{SUBMISSION OF PAPERS}
-Each author should submit the PDF file and all source
-files (text and figures) to enable the paper to be
-reconstructed if there are processing difficulties.
-
-\section{Manuscripts}
-Templates are provided for recommended software and
-authors are advised to use them. Please consult the
-individual conference help pages if questions arise.
-
-\subsection{General Layout}
-
-These instructions are a typical implementation of the
-requirements. Manuscripts should have:
-\begin{Itemize}
- \item Either A4 (\SI{21.0}{cm}~$\times$~\SI{29.7}{cm}; \SI{8.27}{in}~$\times$~\SI{11.69}{in}) or US
- letter size (\SI{21.6}{cm}~$\times$~\SI{27.9}{cm}; \SI{8.5}{in}~$\times$~\SI{11.0}{in}) paper.
- \item Single-spaced text in two columns of \SI{82.5}{mm} (\SI{3.25}{in}) with \SI{5.3}{mm}
- (\SI{0.2}{in}) separation. More recent versions of MSWord have a default spacing of 1.5 lines;
- authors must change this to 1 line.
- \item The text located within the margins specified in Table~\ref{l2ea4-t1}.
-\end{Itemize}
-\begin{table}[hbt]
-% \vspace*{-.5\baselineskip}
- \centering
- \caption{Margin Specifications}
- \begin{tabular}{lcc}
- \toprule
- \textbf{Margin} & \textbf{A4 Paper} & \textbf{US Letter Paper} \\
- \midrule
- Top & \SI{37}{mm} (\SI{1.46}{in}) & \SI{0.75}{in} (\SI{19}{mm}) \\ %[3pt]
- Bottom & \SI{19}{mm} (\SI{0.75}{in}) & \SI{0.75}{in} (\SI{19}{mm}) \\ %[3pt]
- Left & \SI{20}{mm} (\SI{0.79}{in}) & \SI{0.79}{in} (\SI{20}{mm}) \\ %[3pt]
- Right & \SI{20}{mm} (\SI{0.79}{in}) & \SI{1.02}{in} (\SI{26}{mm}) \\
- \bottomrule
- \end{tabular}
- \label{l2ea4-t1}
-% \vspace*{-\baselineskip}
-\end{table}
-
-\subsection{Fonts}
-
-In order to produce good Adobe Acrobat PDF files, authors
-using the LaTeX template are asked to use only the fonts
-defined in the class file in standard, bold (i.\,e. \verb|\textbf|)
-or italic (i.\,e., \verb|\textit|) form and
-symbols from the standard set of fonts. In Word use only
-Symbol and, depending on your platform, Times or Times New Roman
-fonts in standard, bold or italic form.
-
-The layout of the text on the page is illustrated in
-Fig.~\ref{l2ea4-f1}. Note that the paper’s title and the author list should
-be the width of the full page. Tables and figures may span
-the whole \SI{170}{mm} page width, if desired (see Fig.~\ref{l2ea4-f2}), but
-if they span both columns, they should be placed at either
-the top or bottom of a page to ensure proper flow of the
-text (Word templates only: the text should flow from top
-to bottom in each column).
-
-\begin{figure}[!htb]
-% \vspace*{-.5\baselineskip}
- \centering
- \includegraphics*[width=174pt]{JACpic_mc}
- \caption{Layout of papers.}
- \label{l2ea4-f1}
-% \vspace*{-\baselineskip}
-\end{figure}
-
-\begin{figure*}[!tbh]
- \centering
- \includegraphics*[width=\textwidth]{JACpic2v5}
-
- \caption{Example of a full-width figure showing the JACoW Team at their annual
- meeting in 2015. This figure has a multi-line caption that has to be
- justified rather than centered.}
- \label{l2ea4-f2}
-% \vspace*{-\baselineskip}
-\end{figure*}
-
-\subsection{Title and Author List}
-
-The title should use \SI{14}{pt} bold uppercase letters and be centered on the page.
-Individual letters may be lowercase to avoid misinterpretation (e.\,g., mW, MW, SPRing-8, SwissFEL).
-To include a funding support statement, put an asterisk after the title and
-the support text at the bottom of the first column on page~1---in Word,
-use a text box; in \LaTeX, use $\backslash$\texttt{thanks}. See also the
-subsection on footnotes.
-
-The names of authors, their organizations/affiliations and
-postal addresses should be grouped by affiliation and
-listed in \SI{12}{pt} upper- and lowercase letters. The name of
-the submitting or primary author should be first, followed
-by the co-authors, alphabetically by affiliation. Where
-authors have multiple affiliations, the secondary affiliation
-may be indicated with a superscript, as shown in the
-author listing of this paper. See \SEC{Annex~A} for further examples.
-
-\subsection{Section Headings}
-
-Section headings should not be numbered. They should
-use \SI{12}{pt} bold uppercase letters and be centered in the
-column. All section headings should appear directly above
-the text---there should never be a column break between a heading and the
-following paragraph.
-
-\subsection{Subsection Headings}
-
-Subsection headings should not be numbered.
-They should use \SI{12}{pt} italic letters and be left aligned in the column.
-Subsection headings use Title Case (or Initial Caps)
-and should appear directly above the text---there should never be a column break
-between a heading and the following paragraph.
-
-\subsubsection{Third-level Headings} These should use \SI{10}{pt} bold
-letters and be run into the paragraph text. In \LaTeX{} they are
-created with \LaTeX's \verb|\subsubsection| command.
-In the Word templates authors must bold the heading text themselves.
-This heading should be used sparingly. See Table~\ref{style-tab}
-for its style details.
-
-\subsection{Paragraph Text}
-
-Paragraphs should use \SI{10}{pt} font and be justified (touch each side) in
-the column. The beginning of each paragraph should be indented
-approximately \SI{0.33}{cm} (\SI{0.13}{in}). The last line of a paragraph should not be
-printed by itself at the beginning of a column nor should the first line of
-a paragraph be printed by itself at the end of a column.
-
-\subsection{Figures, Tables and Equations}
-
-Place figures and tables as close to their place of mention as
-possible. Lettering in figures and tables should be large enough to
-reproduce clearly. Use of non-approved fonts in figures can lead to
-problems when the files are processed. \LaTeX\ users should be sure to use
-non-bitmapped versions of Computer Modern fonts in equations (Type\,1 PostScript
-or OpenType fonts are required, Their use is described in the JACoW help
-pages~\cite{jacow-help}).
-
-Each figure and table must be numbered in ascending
-order (1, 2, 3, etc.) throughout the paper. After inserting a
-figure in a Word document, click on the figure, right click
-on “Wrap Text”, and select the “In Line with Text” option.
-Figure captions are placed below figures, and table
-captions are placed above tables.
-
-Figure captions are formatted as shown in Figs.~\ref{l2ea4-f1} and \ref{l2ea4-f2},
-while table captions take the form of a heading,
-with initial letters of principle words, capitalized, and
-without a period at the end (see Tables~\ref{eq:units} and \ref{style-tab}).
-Any reference to the contents of the table should be made from
-the body of the paper rather than from within the table
-caption itself.
-
- Single-line captions are centered in the column, while captions
-that span more than one line should be justified.
-The \LaTeX\ template uses the ‘booktabs’ package to
-format tables.
-
-When referring to a figure from within the text, the
-convention is to use the abbreviated form [e.\,g., Fig.~1]
-unless the reference is at the start of the sentence, in
-which case “Figure” is written in full. Reference to a
-table, however, is never abbreviated [e.\,g., Table~1].
-
-
-If a displayed equation needs a number (i.\,e., it will be
-referenced), place it it in parentheses, and flush with the
-right margin of the column. The equation itself should be
-indented and centered, as far as is possible:
-\begin{equation}\label{eq:units}
- C_B=\frac{q^3}{3\epsilon_{0} mc}=\SI{3.54}{\micro eV/T}
-\end{equation}
-
-When referencing a numbered equation, use the word
-“Equation” at the start of a sentence, and the abbreviated
-form, “Eq.”, if in the text. The equation number is placed
-in parentheses [e.g., Eq. (1)].
-
-\subsection{Units}
-
-Units should be written using the standard, roman font,
-not the italic font, as shown in Eq.~(\ref{eq:units}).
-An unbreakable space should precede a unit (in \LaTeX\ use a “\verb|\,|”,
-the template uses the ‘siunits’ package to format units).
-Some examples are: \SI{3}{keV},
-\SI{100}{kW}, \SI{7}{µm}. When a unit appears in a hyphenated,
-compound adjective that precedes a noun, it takes on the
-singular form, e.\,g., the 3.8-meter long undulator.
-
-\subsection{References}
-%
-% References examples given here are not formatted using \cite as there
-% are only reference numbers [1] and [2] in the template
-%
-All bibliographical and web references should be numbered and listed at the
-end of the paper in a section called \SEC{References}. When citing a
-reference in the text, place the corresponding reference number in square
-brackets~[1]. The reference citations in the text should be numbered
-in ascending order. Multiple citations should appear in
-the same square bracket~[3, 4] and
-with ranges where appropriate~[1--4, 10].
-
-A URL may be included as part of a reference, but its
-hyperlink should NOT be added. The usual practice is to
-use a monospace font for the URL so as to help distinguish
-it from normal text. The Word template uses the
-Lucida Sans Typewriter font (size \SI{8}{pt}), while the ‘url’
-package in \LaTeX\ uses the Latin Modern Typewriter font.
-
-For authors to properly cite the resources used when researching
-their papers is an obligation. In the interest of
-promoting uniformity and complete citations, the IEEE
-Editorial Style for Transactions and Journals has been
-adopted~\cite{IEEE}. Please consult the appended material, \SEC{Annex~B},
-for details. The onus is on authors to pay attention to
-the details of the said style to ensure complete, accurate
-and properly formatted references.
-
-\subsection{Footnotes}
-
-Footnotes on the title and author lines may be used for acknowledgments,
-affiliations and e-mail addresses. A non-numeric sequence of characters (*, \#,
-\dag, \ddag) should be used.
-Word users---DO NOT use Word's footnote feature (\textbf{Insert}, \textbf{Footnote})
-to insert footnotes, as this will create formatting problems. Instead, insert
-the title or author footnotes manually in a text box at the bottom of the first column with a
-line at the top of the text box to separate the footnotes from the rest of
-the paper's text. The easiest way to do this is to copy the text box from
-the JACoW template and paste it into your own document.
-These “pseudo footnotes” in the text box should only
-appear at the bottom of the first column on the first page.
-
-Any other footnote in the body of the paper should
-use the normal numeric sequencing (i.\,e., 1, 2, 3)
-and appear at the bottom of the same column in which
-it is used.
-
-\subsection{Acronyms}
-
-Acronyms should be defined the first time they appear.
-
-\section{styles}
-
-Table~\ref{style-tab} summarizes the fonts and spacings used in the styles of
-a JACoW template. In \LaTeX, these are implemented in the ‘jacow’ class file).
-
-\section{page numbers}
-
-\textbf{DO NOT include any page numbers}. They will be added
-when the final proceedings are produced.
-
-\begin{table}[h!t]
- \setlength\tabcolsep{3.5pt}
- \centering
- \caption{Summary of Styles}
- \label{style-tab}
- % \begin{tabular}{p{60pt}p{90pt}cc}
- \begin{tabular}{llcc}
- \toprule
- \textbf{Style} & \textbf{Font} & \textbf{Space} & \textbf{Space} \\
- & & \textbf{Before} & \textbf{After} \\
- \midrule
- \textbf{PAPER} & \SI{14}{pt} & \SI{0}{pt} & \SI{3}{pt} \\
- \textbf{TITLE} & \textbf{UPPERCASE} & & \\
- & \textbf{EXCEPT FOR} & & \\
- & \textbf{REQUIRED lowercase} & & \\
- & \textbf{letters} & & \\
- & \textbf{Bold} & & \\[5pt]
- %\midrule
- Author list & \SI{12}{pt} & \SI{9}{pt} & \SI{12}{pt} \\
- & UPPER- and lowercase & & \\[5pt]
- %\midrule
- \textit{Abstract} & \SI{12}{pt} & \SI{0}{pt} & \SI{3}{pt} \\
- \textit{Title} & \textit{Initial Caps} & & \\
- & \textit{Italic} & & \\[5pt]
- %\midrule
- \textbf{Section} & \SI{12}{pt} & \SI{9}{pt} & \SI{3}{pt} \\
- \textbf{Heading} & \textbf{UPPERCASE} & & \\
- & \textbf{bold} & & \\[5pt]
- %\midrule
- \textit{Subsection} & \SI{12}{pt} & \SI{6}{pt} & \SI{3}{pt} \\
- \textit{Heading} & \textit{Initial Caps} & & \\
- & \textit{Italic} & & \\[5pt]
- %\midrule
- \textbf{Third-level} & \SI{10}{pt} & \SI{6}{pt} & \SI{0}{pt} \\
- \textbf{Heading} & \textbf{Initial Caps} & & \\
- & \textbf{Bold} & & \\[5pt]
- %\midrule
- Figure & \SI{10}{pt} & \SI{3}{pt} & $\ge$\SI{3}{pt} \\
- Captions & & & \\[5pt]
- %\midrule
- Table & \SI{10}{pt} & $\ge$\SI{3}{pt} & \SI{3}{pt} \\
- Captions & & & \\[5pt]
- %\midrule
- Equations & \SI{10}{pt} base font & \SI{12}{pt} & \SI{12}{pt} \\[5pt]
- %\midrule
- References\footnotemark
- & \SI{9}{pt}, justified with & \SI{0}{pt} & \SI{0}{pt} \\
- & \SI{0.52}{cm} (\SI{0.2}{in}) hanging & & \\
- & indent & & \\
- \bottomrule %\SI{0.25}{in}
- \end{tabular}
-\end{table}
-\footnotetext{In the case of more than 9 references, to ensure their proper alignment,
- Refs. 1 to 9 only should also have a \SI{0.16}{cm} (\SI{0.06}{in}) left indent, while Refs. 10
- onwards should have their hanging indent increased to \SI{0.68}{cm} (\SI{0.26}{in}). Further
- information is given in \SEC{Annex~B}.}
-
-\section{templates}
-
-Template documents for the recommended word processing
-software are available from the JACoW website~\cite{jacow-help}
-and exist for \LaTeX, Microsoft Word (Mac and PC)
-and LibreOffice/Apache OpenOffice for US letter and A4
-paper sizes.
-
-Use the correct template for your paper size and version
-of Word. Do not transport Microsoft Word documents across
-platforms (e.\,g., Mac\,$\leftrightarrow$\,PC). To ensure
-that fonts are embedded in Word 2010 documents (PC), the
-“Embed fonts in file” option must be selected from within the
-Word Options$\rightarrow$Save window. Fonts are embedded by
-default when printing to PDF on MAC OSX.
-
-
-\section{checklist for electronic publication}
-
-\begin{Itemize}
- \item Use only Times or Times New Roman (standard, bold or italic) and Symbol
- fonts for text---\SI{10}{pt} minimum except references, which can be \SI{9}{pt} or \SI{10}{pt}.
- \item Figures should use Times or Times New Roman (standard, bold or italic) and
- Symbol fonts when possible---\SI{6}{pt} minimum.
- \item Check that citations to references appear in sequential order and
- that all references are cited.
- \item Check that the PDF file prints correctly.
- \item Check that there are no page numbers.
- \item Check that the margins on the printed version are within \SI{\pm1}{mm}
- of the specifications.
- \item \LaTeX\ users can check their margins by invoking the
- \texttt{boxit} option.
-\end{Itemize}
-
-\raggedend
-\newpage
-
-\section{Conclusion}
-
-Any conclusions should be in a separate section directly preceding
-the \SEC{Acknowledgment}, \SEC{Appendix}, or \SEC{References} sections, in that
-order.
-
-\section{acknowledgment}
-Any acknowledgment should be in a separate section directly preceding
-the \SEC{References} or \SEC{Appendix} section.
-
-
-\section{appendix}
-Any appendix should be in a separate section directly preceding
-the \SEC{References} section. If there is no \SEC{References} section,
-this should be the last section of the paper.
-
-\iffalse % only for "biblatex"
- \newpage
- \printbibliography
-
-% "biblatex" is not used, go the "manual" way
-\else
-
-%\begin{thebibliography}{99} % Use for 10-99 references
-\begin{thebibliography}{9} % Use for 1-9 references
-
-%\bibitem{accelconf-ref}
-% C. Petit-Jean-Genaz and J. Poole,
-% ``JACoW, A service to the Accelerator Community,''
-% EPAC'04, Lucerne, July 2004, THZCH03, p.~249,
-% \url{http://www.JACoW.org/e04/papers/THZCH03.PDF}
-
-\bibitem{jacow-help}
- JACoW,
- \url{http://www.jacow.org}
-
-\bibitem{IEEE}
- \textit{IEEE Editorial Style Manual},
- IEEE Periodicals, Piscataway,
- NJ, USA, Oct. 2014, pp. 34--52.
-\end{thebibliography}
-%\null % this is a hack for correcting the wrong un-indent by package 'flushend' in versions before 2015
-
-\fi
-
-\newpage
-
-\twocolumn[\vspace*{-1.8ex}\section{ANNEX A:\endgraf FORMATTING OF AUTHORS AND AFFILIATIONS}]
-
-The names of authors, their organizations/affiliations
-and postal addresses should be grouped by affiliation and
-listed in \SI{12}{pt} upper- and lowercase letters. The name of
-the submitting or primary author should be first, followed
-by the co-authors, alphabetically by affiliation. If the
-author list for a given affiliation spans multiple lines,
-please be sure to break the line in a manner that does not
-split the author’s initials from the author’s last name. This
-is easily done by placing unbreakable spaces between the
-initials and last name. The affiliation name and address
-are also best kept together on the same (but not necessarily
-separate) line, wherever possible. (See, for example,
-the entry for GSI in the following). In cases where authors
-have multiple affiliations, the secondary affiliation is
-inserted below the author/primary affiliation listing and is
-indicated with a superscript, as shown in the following. A
-spacing of \SI{3}{pt} is added to before the secondary affiliation.
-
-\newpage
-
-Footnotes on the title and author lines may be used for
-acknowledgments and e-mail addresses, using a nonnumeric
-sequence of characters (\textsuperscript{*}, \textsuperscript{†},
-\textsuperscript{‡}, \textsuperscript{§}, \textsuperscript{\#}). In Word,
-footnotes are best inserted manually in a text box at the
-bottom of the first column with a line at the top of the text
-box to separate the footnotes from the rest of the paper’s
-text.
-
-For examples of the preferred formatting of authors and
-affiliations, please consult the following list of JACoW
-collaboration members.
-
-For manuscripts submitted by large collaborations with
-potentially many tens of authors and where, additionally,
-there may be page number limitations, a format consisting
-of the principle author’s name and institute, followed by
-“on behalf of the … collaboration”, is preferred.
-
-
-\clearpage
-%
-% Include the title/author page of the JACoW Coolaboration
-%
-\includepdf[pages=-, noautoscale, pagecommand={}]{jacow-collaboration-2016.pdf}{}
-
-\clearpage
-
-\twocolumn[\vspace*{-1.8ex}\section{ANNEX B:\endgraf IEEE REFERENCE STYLE GUIDE AS APPLIED TO \NoCaseChange{JACoW}
- PAPERS, PERIODICALS AND OTHER WORKS}]
-
-
-\subsection{Referencing JACoW Proceedings}
-
-The format for published JACoW proceedings papers
-can be readily deduced from Refs. [1-3].
-
-\subsubsection{Author Listing} Careful attention should be given to the
-placing of commas and the use of ‘and’ in the author list.
-In particular, for the case of six or more authors
-(Ref. [3]), a comma also follows the penultimate author.
-The preference for ‘\emph{et al.}’\ takes precedence when the number
-of authors becomes large (e.g., $>$6).
-
-\subsubsection{Paper Title} As is modern practice in references, the title
-of the paper is written in sentence case, i.e., only the
-initial letter of the first word in the title is capitalized.
-Proper nouns, however, also have a capital. Capital letters
-appearing in acronyms likewise remain unaltered
-
-\subsubsection{Conference Proceedings} The proceedings title is written
-in title case in italics using standard abbreviations,
-such as Int. and Conf. The preposition, “in”, in normal
-font, precedes the proceedings title. The location,
-i.e., city, state (if USA), and country of the conference
-venue, the month (three-letter abbreviation) and the year
-the conference took place, is then listed. Finally, details
-pertaining to the paper itself, such as the conference paper
-ID and mandatory page numbers are given. The conference
-paper ID is optional, and may be included in the
-interest of facilitating a search through internet search
-engines. The complete or abbreviated form for citations,
-as shown in the following section, is recommended. The
-former is more informative to readers outside the immediate
-conference sphere. Both forms, however, ensure a
-proper import into digital libraries and information
-sources such as INSPIRE, Scopus, and Google Scholar.
-To this end, the minimal form is also listed for convenience.
-Although this form is not advocated, it nevertheless
-remains acceptable.
-
-Authors are also reminded to make a distinction between
-papers published in JACoW proceedings (which
-will always have page numbers) and those papers that
-may have been presented at past JACoW conferences but
-were not published [4]. References to contributions presented
-at the same conference should be written as shown
-in Ref. [5]; the wording “this conference” may be optionally
-appended.
-
-\subsection{Referencing Periodicals and Other Sources}
-
-The IEEE style is also shown for periodicals [6-11],
-online sources [12], books [13, 14], internal reports [15],
-theses [16], manuals or handbooks [17], patents [18] and
-unpublished material [19, 20]. Examples of correctly
-formatted references can be found at the JACoW website,
-under ‘Formatting Citations’ which is reached through the
-‘for Authors’ link.
-
-\subsection{Alignment of References}
-
-Entries to the References section follow a hanging indent
-structure. In this way, reference numbers in the first
-line of each reference entry are right aligned, while subsequent
-lines within a given reference are indented by a
-specified amount. The indentation values for Word are
-shown in Table~1 of this Annex and depend on whether
-the number of references exceeds single digit values.
-
-In the \LaTeX\ template, \verb|\bibliography{9}| is used for
-when the total number of references is less than ten. This
-should be changed to \verb|\bibliography{99}| if the number of
-references is ten or more.
-
-\begin{table}[h!t]
- \centering
- %\setlength\tabcolsep{3.5pt}
- \caption{Formatting of References}
- \label{format-refs}
- % \begin{tabular}{p{60pt}p{90pt}cc}
- \begin{tabular}{lllcc}
- \toprule
- \textbf{Font} & \textbf{Left} & \textbf{Hanging} & \textbf{Space} & \textbf{Space} \\
- & \textbf{Indent} & \textbf{Indent} & \textbf{Before} & \textbf{After} \\
- \midrule
- \multicolumn{5}{c}{\textbf{No. References $>$10}} \\[1mm]
- \SI{9}{pt}, & \SI{0.00}{cm} & \SI{0.52}{cm} & \multirow{2}{*}{\SI{0}{pt}}
- & \multirow{2}{*}{\SI{3}{pt}} \\
- justified & \SI{0.00}{in} & \SI{0.20}{in} & & \\
- \midrule
- \multicolumn{5}{c}{\textbf{No. References $\le$9}} \\
- \multicolumn{5}{l}{\textbf{Refs. 1 to 9}} \\[1mm]
- \SI{9}{pt}, & \SI{0.16}{cm} & \SI{0.52}{cm} & \multirow{2}{*}{\SI{0}{pt}}
- & \multirow{2}{*}{\SI{3}{pt}} \\
- justified & \SI{0.06}{in} & \SI{0.20}{in} & & \\[3mm] \multicolumn{5}{l}{\textbf{Refs. 10 onwards}} \\[1mm]
- \SI{9}{pt}, & \SI{0.00}{cm} & \SI{0.68}{cm} & \multirow{2}{*}{\SI{0}{pt}}
- & \multirow{2}{*}{\SI{3}{pt}} \\
- justified & \SI{0.00}{in} & \SI{0.26}{in} & & \\
- \bottomrule
- \end{tabular}
-\end{table}
-
-\patchcmd\thebibliography{\section*{REFERENCES\@mkboth {REFERENCES}{REFERENCES}}}{}{}{}
-\section{PAPER PUBLISHED IN A CONFERENCE PROCEEDINGS}
-
-\definecolor{jgreen}{cmyk}{0.81, 0.00, 0.97, 0.00}
-\definecolor{jred}{cmyk} {0.00, 0.99, 1.00, 0.00}
-\definecolor{jgrepc}{cmyk}{0.74, 0.05, 1.00, 0.00}
-\definecolor{jblue}{cmyk} {0.87, 0.54, 0.00, 0.00}
-\definecolor{jvio}{cmyk} {0.41, 0.82, 0.00, 0.00}
-\definecolor{jbook}{cmyk} {0.28, 0.88, 0.79, 0.25}
-\definecolor{jrept}{cmyk} {0.07, 0.70, 1.00, 0.00}
-\definecolor{jmanu}{cmyk} {0.28, 0.77, 1.00, 0.23}
-\definecolor{junpu}{cmyk} {0.00, 0.83, 0.65, 0.00}
-
-
-\subsection{Complete Form}
-
-%\begin{thebibliography}{99} % Use for 10-99 references
-\begin{thebibliography}{9} % Use for 1-9 references
-
- \bibitem{item:1-1}
- A.~Alpha and B.~T.~Beta, “An interesting paper,”
- in \textit{Proc. 1st Int. Particle Accelerator Conf. (IPAC’10)},
- Kyoto, Japan, May 2010,
- paper MOP057, pp. 567--569.\\
- \textcolor{jgreen}{[Conference Proceedings, two authors; optional paper ID]}
-
- \bibitem{item:1-2}
- A.~Alpha \emph{et al.},
- “A fascinating paper about FELs,”
- in \emph{Proc. 35th Int. Free-Electron Laser Conf. (FEL’13)},
- New York, NY, USA, Aug. 2013,
- paper WEP033, pp. 27--29.\\
- \textcolor{jgreen}{[Conference Proceedings, for six or more authors use \emph{et al.};
- paper ID is optional]}
-
- \bibitem{item:1-3}
- A.~Alpha, B.~T.~Beta, C.~Gamma, and D.~Delta,
- “An overview of control systems,”
- in \emph{Proc. 13th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS’11)}, Grenoble, France, Oct. 2011,
- paper TUP014, pp. 89--91.\\
- \textcolor{jgreen}{[Conference Proceedings, four authors; optional paper ID]}
-\end{thebibliography}
-
-\newpage
-\subsection{Abbreviated Form}
-
-\begin{thebibliography}{9} % Use for 1-9 references
- \bibitem{item:2-1}
- A.~Alpha and B.~T.~Beta, “An interesting paper,”
- in \textit{Proc. IPAC’10},
- Kyoto, Japan, May 2010,
- paper MOP057, pp. 567--569.\\
- \textcolor{jgreen}{[Conference Proceedings, two authors; optional paper ID]}
-
- \bibitem{item:2-2}
- A.~Alpha \emph{et al.},
- “A fascinating paper about FELs,”
- in \emph{Proc. FEL’13},
- New York, NY, USA, Aug. 2013,
- paper WEP033, pp. 27--29.\\
- \textcolor{jgreen}{[Conference Proceedings, for six or more authors use \emph{et al.};
- paper ID is optional]}
-
- \bibitem{item:2-3}
- A.~Alpha, B.~T.~Beta, C.~Gamma, and D.~Delta,
- “An overview of control systems,”
- in \emph{Proc. ICALEPCS’11}, Grenoble, France, Oct. 2011,
- paper TUP014, pp. 89--91.\\
- \textcolor{jgreen}{[Conference Proceedings, four authors; optional paper ID]}
-\end{thebibliography}
-
-\subsection{Minimal Form}
-
-\begin{thebibliography}{9} % Use for 1-9 references
-
- \bibitem{item:3-1}
- A.~Alpha and B.~T.~Beta,
- in \textit{Proc. IPAC’10},
- pp. 567--569.\\
- \textcolor{jgreen}{[Conference Proceedings, two authors]}
-
- \bibitem{item:3-2}
- A.~Alpha \emph{et al.},
- in \emph{Proc. FEL’13},
- pp. 27--29.\\
- \textcolor{jgreen}{[Conference Proceedings, for six or more authors use \emph{et al.}]}
-
- \bibitem{item:3-3}
- A.~Alpha, B.~T.~Beta, C.~Gamma, and D.~Delta,
- in \emph{Proc. ICALEPCS’11},
- pp. 89--91.\\
- \textcolor{jgreen}{[Conference Proceedings, four authors]}
-\end{thebibliography}
-
-\section{UNPUBLISHED PAPER PRESENTED AT A PREVIOUS CONFERENCE}
-
-\subsection{Complete Form}
-
-\begin{thebibliography}{9} % Use for 1-9 references
-\setcounter{enumi}{3}
- \bibitem{item:41}
- A.~Alpha and B.~T.~Beta,
- “An interesting talk,”
- presented at the 5th Int. Particle Accelerator Conf. (IPAC’14),
- Dresden, Germany, Jun. 2014, paper MOP057, unpublished.\\
- \textcolor{jred}{[Unpublished paper; conference name in normal font; paper
- ID may only be given if material supplementing the proceedings
- exists on the JACoW website, e.\,g., PDF of talk]}
-\end{thebibliography}
-
-\subsection{Abbreviated Form}
-
-\begin{thebibliography}{9} % Use for 1-9 references
-\setcounter{enumi}{3}
- \bibitem{item:42}
- A.~Alpha and B.~T.~Beta,
- “An interesting talk,”
- presented at IPAC’14,
- Dresden, Germany, Jun. 2014, paper MOP057, unpublished.\\
- \textcolor{jred}{[Unpublished paper; conference name in normal font; paper
- ID may only be given if material supplementing the proceedings
- exists on the JACoW website, e.\,g., PDF of talk]}
-\end{thebibliography}
-
-
-\section{PAPER PRESENTED AT THE CURRENT CONFERENCE}
-
-\subsection{Complete Form}
-
-\begin{thebibliography}{9} % Use for 1-9 references
-\setcounter{enumi}{4}
- \bibitem{item:51}
- A.~Alpha and B.~T.~Beta,
- “An interesting talk,”
- presented at the 7th Int. Particle Accelerator Conf. (IPAC’16),
- Busan, Korea, May 2016,
- paper MOAB01, this conference.\\
- \textcolor{jgrepc}{[Current conference; conference name in normal font; the
- wording “this conference” is optional]}
-\end{thebibliography}
-
-\subsection{Abbreviated Form}
-
-\begin{thebibliography}{9} % Use for 1-9 references
-\setcounter{enumi}{4}
- \bibitem{item:52}
- A.~Alpha and B.~T.~Beta,
- “An interesting talk,”
- presented at IPAC’16,
- Busan, Korea, May 2016,
- paper MOAB01, this conference.\\
- \textcolor{jgrepc}{[Current conference; conference name in normal font; the
- wording “this conference” is optional]}
-\end{thebibliography}
-
-
-\section{PAPER PUBLISHED IN, OR SUBMITTED TO, A PERIODICAL}
-
-\begin{thebibliography}{99} % Use for 1-9 references
- \setcounter{enumi}{5}
- \bibitem{item:6}
- P.~Mercury \emph{et al.},
- “Title of paper published in journal,”
- \emph{Phy. Rev. Lett.}, vol. 114, no. 5,
- p. 050511, Feb. 2014. \\
- \textcolor{jblue}{[Periodical, Phys. Rev. Lett.;
- issue no. and month may be omitted]}
-
- \bibitem{item:7}
- P.~Venus \emph{et al.},
- “New techniques in laser wakefield accelerators,”
- \emph{Phys. Rev. ST Accel. Beams}, vol. 18,
- p. 120198, Dec.~2015. \\
- \textcolor{jblue}{[Periodical, Phys. Rev. ST Accel. Beams;
- month may be omitted]}
-
- \bibitem{item:8}
- T.~Earth \emph{et al.},
- “Low dose irradiation impact on modern silicon detectors,”
- \emph{Nucl. Instr. Meth.}, vol. 692, pp. 256--280, 2014.
- \textcolor{jblue}{[Periodical, Nucl. Instr. Method.]}
-
- \bibitem{item:9}
- T.~Earth, L.~Moon, and A.~Belt,
- “Temporal correlations of x-ray free electron lasers,”
- \emph{Optics Express}, vol. 20, pp. 11396--11404, 2012.
- \textcolor{jblue}{[Periodical, Optics Express]}
-
- \bibitem{item:10}
- J.~B.~Good,
- “A paper accepted for publication,”
- \emph{Phys. Rev. Lett.}, to be published.
- \textcolor{jblue}{[Periodical, paper accepted for publication
- by Phys. Rev. Lett.]}
-
- \bibitem{item:11}
- G.~D.~Read,
- “Title of paper submitted for publication,”
- submitted for publication.
- \textcolor{jblue}{[Paper submitted for publication; the name of the
- periodical does not appear]}
-\end{thebibliography}
-
-\section{ONLINE SOURCE}
-
-\begin{thebibliography}{99} % Use for 1-9 references
- \setcounter{enumi}{11}
- \bibitem{item:121}
- JACoW, \url{http://www.jacow.org} \\
- \textcolor{jvio}{[online source; no hyperlink, no period at end of URL
- unless there is a trailing “/” as shown below. A monospace
- font, such as Lucida Sans Typewriter (size 8 pt), is used in
- Word, while the ‘url’ package in \LaTeX\ uses the Latin Modern Typewriter font]}
-
- \setcounter{enumi}{11}
- \bibitem{item:122}
- JACoW, \url{http://www.jacow.org/}. \\
- \textcolor{jvio}{[online source; no hyperlink, period after traling “/” in
- URL allowed. A monospace font, such as Lucida Sans Typewriter
- (size 8 pt), is used in Word, while the ‘url’ package in \LaTeX\
- uses the Latin Modern Typewriter font]}
-\end{thebibliography}
-
-\section{CITATIONS TO BOOKS}
-
-\begin{thebibliography}{99} % Use for 1-9 references
- \setcounter{enumi}{12}
- \bibitem{item:13}
- T.~Earth and L.~Moon,
- “Title of chapter in the book,”
- in \emph{Title of Book}, R Mars, Ed. New York, NY, USA:
- Wiley, 1994, pp.~42--48. \\
- \textcolor{jbook}{[Chapter in book]}
-
- \bibitem{item:14}
- A.~Belt, \emph{Title of Book}. Cambridge, MA, USA:
- MIT Press, 1986. \\
- \textcolor{jbook}{[Book]}
-\end{thebibliography}
-
-\section{REPORTS AND THESES}
-
-\begin{thebibliography}{99} % Use for 1-9 references
- \setcounter{enumi}{14}
- \bibitem{item:15}
- G. Jupiter \emph{et al.},
- “Title of report,” CERN, Geneva, Switzerland,
- Rep. CERN-2012-333, Oct. 2012.\\
- \textcolor{jrept}{[Report]}
-
- \bibitem{item:16}
- A.~Student, “Title of thesis,”
- Ph.D. thesis, Phys. Dept.,
- Karlsruher Institut für Technologie, Karlsruhe,
- Germany, 2014.\\
- \textcolor{jrept}{[Thesis]}
-\end{thebibliography}
-
-\newpage
-
-\section{MANUAL}
-
-\begin{thebibliography}{99} % Use for 1-9 references
- \setcounter{enumi}{16}
- \bibitem{item:17}
- \emph{IEEE Editorial Style Manual},
- IEEE Periodicals,
- Piscataway, NJ, USA, Oct. 2014, pp. 34-52;
- \url{http://www.ieee.org/documents/style_manual.pdf} \\
- \textcolor{jmanu}{[Handbook/Manual, no hyperlink, no period after URL]}
-\end{thebibliography}
-
-\section{PATENTS}
-
-\begin{thebibliography}{99} % Use for 1-9 references
- \setcounter{enumi}{17}
- \bibitem{item:18}
- A.~N.~Inventor,
- “Title of patent,”
- Patent Authority and No., Jan. 20, 2016.
-
-\end{thebibliography}
-
-\newpage
-
-\section{UNPUBLISHED WORK AND PRIVATE COMMUNICATION}
-
-\begin{thebibliography}{99} % Use for 1-9 references
- \setcounter{enumi}{18}
- \bibitem{item:19}
- P.~Neptune, “Title of paper,” unpublished.\\
- \textcolor{junpu}{[Unpublished]}
-
- \bibitem{item:20}
- P.~Uranus, private communication, Jun. 2015.\\
- \textcolor{junpu}{[Private communication]}
-
-\end{thebibliography}
-\null % this is a hack for correcting the wrong un-indent by package 'flushend' in versions before 2015
-
-\newpage
-
-\twocolumn[\vspace*{-1.8ex}\section{ANNEX C:\endgraf THE DILIGENT AUTHOR’S CHECKLIST}]
-
-\subsection{Common Oversights}
-
-In order to lessen the load on a small team of editors
-and to help expedite publication of the Proceedings, authors
-are kindly asked to give themselves an extra few
-minutes to go over the following points, which highlight
-the most common errors, before uploading their paper. By
-providing a properly formatted JACoW paper, the Proceedings
-Office is able to benefit from an autodistill process
-which automatically converts the author's PDF file
-into a version that adheres to the JACoW-compliant PDF
-standard. The process further ensures that all fonts required
-to view the entire document are embedded, rendering
-a final PDF that qualifies technically for publication.
-
-
-\subsection{Author and Affiliation Listing}
-
-The names of authors and their affiliations should be in
-\SI{12}{pt} uppercase and lowercase letters, with standard,
-roman fonts (i.\,e., not italics). When there is more than
-one author, the submitting author should be first, followed
-by the co-author. Co-authors should be grouped by affiliation
-and then be listed alphabetically. Please refer to \SEC{Annex~A}
-for further details and examples, particularly for
-the case where authors have multiple institutes.
-
-\subsection{Title, Abstract, and Author Listing in the SPMS}
-
-Authors are prompted to verify that the title, the abstract
-and the author/institute listing, previously submitted
-to the SPMS, has been updated to match that now appearing
-in the final manuscript. In particular, primary authors
-are reminded that it is their responsibility to check the
-accuracy of the co-authors entered in the SPMS database.
-These should be an exact match to that appearing in the
-paper. This is required to ensure the proper indexing of
-authors to papers in the published proceedings.
-
-\subsection{Subsection Headings}
-
-Subsection Headings use \SI{12}{pt} italic lowercase and uppercase.
-The initial letter of every principle word is capitalized,
-and the heading is left aligned in the column.
-
-\subsection{Figure Captions}
-
-Figure captions should be placed below the figure and
-centered if on one line, but justified if spanning two or
-more lines:
-\begin{center}
- Figure 1: A one line figure caption is centered.
-\end{center}
-\begin{justify}
- Figure 2: A lengthy figure caption that spans
- two lines is justified.
-\end{justify}
-Note the colon “:” after the figure number and the period
-“.” at the end of the caption.
-
-\newpage
-
-When referring to a figure from within the text, the
-convention is to use the abbreviated form, i.\,e., Fig.~1,
-unless the reference to the figure is at the start of the sentence:
-\begin{quote}
- Figure 1 shows a schematic view of...
-
- ... as shown in Fig.~1.
-\end{quote}
-
-\subsection{Table Headings}
-
-Table captions should be placed above the table and
-centered if on one line, but justified if spanning two or
-more lines:
-\begin{center}
- Table 1: Table Heading
-\end{center}
-\begin{justify}
- Table 2: A Particularly Long Table Heading
- Spanning Two Lines
-\end{justify}
-
-Note the colon ":" after the table number, that the initial
-letters of the principle words in the table heading are
-capitalized, and the absence of a period at the end of the
-caption.
-
-When referring to a table from within the text, the convention
-is NOT to abbreviate, i.\,e., Table 1.
-
-\subsection{Equations}
-
-If a displayed equation requires a number, it should be
-placed flush with the right margin of the column. Please
-leave sufficient space immediately before and after the
-equation, i.\,e., in Microsoft Word, \SI{12}{pt} before and after.
-
-\subsection{Units}
-
-An unbreakable space should always precede a unit. In \LaTeX\ use
-a “\verb|\,|” or the ‘siunits’ package to format units.
-Examples are:
-\SI{3}{keV}, \SI{4}{GeV}, \SI{100}{kW}, \SI{7}{µm}.
-
-\subsection{References}
-
-References are written in \SI{9}{pt} size and should be neatly
-presented in a consistent format with reference numbers
-aligned. Please refer to \SEC{Annex~B} for the preferred format
-and proper alignment.
-
-Please also ensure that references in the text are cited in
-sequential order.
-
-
-\end{document}
-
\ No newline at end of file
Modified: trunk/Master/texmf-dist/doc/latex/jacow/README
===================================================================
--- trunk/Master/texmf-dist/doc/latex/jacow/README 2018-04-04 20:17:27 UTC (rev 47286)
+++ trunk/Master/texmf-dist/doc/latex/jacow/README 2018-04-04 20:17:44 UTC (rev 47287)
@@ -6,9 +6,9 @@
Authors: John Jowett (CERN), Michel Goossens (CERN),
Martin Comyn (TRIUMF), John Poole (CERN), Todd Satogata (BNL),
Ulrike Fischer, Volker RW Schaa (GSI)
-Version: 1.95
-Date: 10 April 2016
-Copyright: 1996-2016 by JACoW, Geneva, Switzerland
+Version: 2.2
+Date: 22 Februar 2018
+Copyright: 1996-2018 by JACoW, Geneva, Switzerland
Homepage: http://www.jacow.org
License: LPPL 1.3c
Status: Maintained
@@ -32,26 +32,35 @@
The package consists of the following files
class file
- jacow.cls the class file
+ jacow.cls JACoW class file v2.2 of 2018/02/23
+
templates
- LaTeX-A4-JACoW.tex A4/letter templates to demonstrate the
- LaTeX-Letter-JACoW.tex use and explain the various parameters
+ JACoW_A4_LaTeX.tex basic A4/letter templates to demonstrate the
+ JACoW_US_LaTeX.tex use and explain the various parameters
and settings for a submission to a
- JACoW conference proceedings, in is divided
- LaTeX-A4-JACoW.pdf in a template in format "A4" with European
- settings (citation form, British hyphenation
- and writing) and a
- LaTeX-Letter-JACoW.pdf template in format "letter" and American
- setting (citation form and US-English
- hyphenation and writing)
- figures
- JACpic_mc.pdf a graphic showing the JACoW page format
- JACpic2v5.png a graphic for a full width figure (spanning
- the two columns and multiline caption)
- jacow-collaboration-2016.tex an example title page showing the
- jacow-collaboration-2016.pdf JACoW Colloaboration, the responsible
- editors for the various platform
- dependent templates (LaTeX, Word on PC and
- Mac, ODF). The PDF is later included in the
- template run.
+ JACoW conference proceedings.
+
+ JACoW_A4_LaTeX.pdf PDF with JACoW class file documentation and examples for
+ A4 with "en_uk" and Letter with en_us specific formatting.
+
+ JACoW_US_LaTeX.pdf template in format "letter" and American formatting
+ To generate the complete PDF for documentation
+ please remove the "%" of the last two commands
+ in "JACoW_xx_LaTeX.tex" which include the
+ Annexes A-C of "annexes-xx.tex"
+
+ annexes-A4.tex Annexes A-C which are included in "JACoW_A4_LaTeX.tex"
+ annexes-US.tex Annexes A-C which are included in "JACoW_US_LaTeX.tex"
+
+
+ figures/includes
+ JACpic_mc.pdf a graphic showing the JACoW page format
+ (being the smaller side of A4 and letter respectively)
+ jacow2017.jpg a graphic for a full width figure (spanning
+ the two columns and multiline caption) showing
+ the participants of the 2017 JACoW Team Meeting
+
+ jacow-collaboration-2018.tex an example title page showing the JACoW Collaboration.
+ jacow-collaboration-2018.pdf The PDF is later included in ANNEX A.
+
Added: trunk/Master/texmf-dist/doc/latex/jacow/annexes-A4.tex
===================================================================
--- trunk/Master/texmf-dist/doc/latex/jacow/annexes-A4.tex (rev 0)
+++ trunk/Master/texmf-dist/doc/latex/jacow/annexes-A4.tex 2018-04-04 20:17:44 UTC (rev 47287)
@@ -0,0 +1,521 @@
+\twocolumn[\vspace*{-1.8ex}\section{ANNEX A:\endgraf FORMATTING OF AUTHORS AND AFFILIATIONS}\vspace*{\baselineskip}]
+
+\flushcolsend
+
+The names of authors, their organizations/affiliations
+and postal addresses should be grouped by affiliation and
+listed in \SI{12}{pt} upper- and lowercase letters. The name of
+the submitting or primary author should be first, followed
+by the coauthors, alphabetically by affiliation. If the
+author list for a given affiliation spans multiple lines,
+please be sure to break the line in a manner that does not
+split the author’s initials from the author’s last name. This
+is easily done by placing unbreakable spaces between the
+initials and last name. The affiliation name and address
+are also best kept together on the same (but not necessarily
+separate) line, wherever possible. (See, for example,
+the entry for GSI in the following). In cases where authors
+have multiple affiliations, the secondary affiliation is
+inserted below the author/primary affiliation listing and is
+indicated with a superscript, as shown in the following.
+
+
+Footnotes on the title and author lines may be used for
+acknowledgements and e-mail addresses, using a non-numeric
+sequence of characters (\textsuperscript{*}, \textsuperscript{†},
+\textsuperscript{‡}, \textsuperscript{§}, \textsuperscript{\P}
+as generated by \LaTeX's \verb|\footnote| command).
+
+For examples of the preferred formatting of authors and
+affiliations, please consult the following list of JACoW
+collaboration members.
+
+For manuscripts submitted by large collaborations with
+potentially many tens of authors and where, additionally,
+there may be page number limitations, a format consisting
+of the principle author’s name and institute, followed by
+“on behalf of the … collaboration”, is preferred.
+
+
+\clearpage
+%
+% Include the title/author page of the JACoW Coolaboration
+%
+\includepdf[pages=-, noautoscale, pagecommand={}]{jacow-collaboration-2018.pdf}{}
+
+\clearpage
+
+\twocolumn[\vspace*{-1.8ex}\section{ANNEX B:\endgraf IEEE REFERENCE STYLE GUIDE AS APPLIED TO \NoCaseChange{JACoW} PAPERS, \break PERIODICALS AND OTHER WORKS}\vspace*{\baselineskip}]
+
+\subsection{Referencing JACoW Proceedings}
+
+The format for published JACoW proceedings papers is detailed in the following
+and can also be readily deduced from Refs. [1-3]. At the very minimum, sufficient
+information should be given to enable readers to clearly identify the paper and
+to facilitate its import into digital databases.
+\vspace*{-.6\baselineskip}
+
+\subsubsection{Author Listing} Careful attention should be given to the
+placing of commas and the use of ‘and’ in the author list.
+In particular, for the case of three or more authors
+(as in [3]), a comma also follows the penultimate author.
+The preference for ‘\emph{et al.}’\ takes precedence when the number
+of authors becomes large (e.g., $>$6).
+\vspace*{-.6\baselineskip}
+
+\subsubsection{Paper Title} As is modern practice in references, the title
+of the paper is written in sentence case, i.e., only the
+initial letter of the first word in the title is capitalized.
+Proper nouns, however, also have a capital. Capital letters
+appearing in acronyms likewise remain unaltered
+\vspace*{-.6\baselineskip}
+
+\subsubsection{Conference Proceedings} The proceedings title is
+written in title case in italics using standard abbreviations,
+such as \emph{Int.} and \emph{Conf.} The preposition, ``in'', in normal
+font, precedes the proceedings title. The location,
+i.\,e., city, state (if USA), and country of the conference
+venue, the month (three-letter abbreviation) and the year
+the conference took place, is then listed. Finally, details
+pertaining to the paper itself, such as the conference paper
+ID, mandatory page numbers, and the digital object
+identifier (DOI), if existing, are listed in the given order.
+A monospace font for the DOI is used so as to help
+distinguish it from normal text. In \LaTeX{}
+the ‘url’ package is used. The conference
+paper ID is optional and may be included in the absence
+of a DOI to facilitate a search through internet search
+engines. DOIs have been assigned to all JACoW
+publications appearing in recent proceedings and will
+likewise be assigned to articles from conferences further
+past, in due course. The use of DOIs is strongly
+emphasized.
+
+The complete or abbreviated form for citations, as
+shown in the following section, is advocated. The former
+is more informative to readers outside the immediate
+conference sphere, and will further serve to avoid
+potential ambiguities in cases where an acronym is not
+unique. Both forms, however, when adhered to, ensure a
+proper import into digital libraries and information
+sources such as INSPIRE, Scopus, and Google Scholar.
+Authors are also reminded to make a distinction between
+papers published in JACoW proceedings (which have
+page numbers and, in the case of recent publications,
+DOIs) and those papers that may have been presented at
+past JACoW conferences but were not published~[4].
+References to contributions presented at the same
+conference should be written as shown in [5]; the wording
+“this conference” may be optionally appended.
+
+\subsection{Referencing Periodicals and Other Sources}
+
+The IEEE style is also shown for periodicals [6-11],
+online sources [12], books [13, 14], internal reports [15],
+theses [16], manuals or handbooks [17], patents [18] and
+unpublished material [19, 20]. Examples of correctly
+formatted references can also be found at the JACoW website,
+under ‘Formatting Citations’ which is reached through the
+‘for Authors’ link.
+
+\subsection{Alignment of References}
+
+In the \LaTeX{} template, \verb|\bibliography{9}| is used for
+when the total number of references is less than ten. This
+should be changed to \verb|\bibliography{99}| if the number of
+references is ten or more.
+
+\patchcmd\thebibliography{\section*{REFERENCES\@mkboth {REFERENCES}{REFERENCES}}}{}{}{}
+\section{PAPER PUBLISHED IN A CONFERENCE PROCEEDINGS}
+
+\definecolor{jgreen}{cmyk}{0.81, 0.00, 0.97, 0.00}
+\definecolor{jred}{cmyk} {0.00, 0.99, 1.00, 0.00}
+\definecolor{jgrepc}{cmyk}{0.74, 0.05, 1.00, 0.00}
+\definecolor{jblue}{cmyk} {0.87, 0.54, 0.00, 0.00}
+\definecolor{jvio}{cmyk} {0.41, 0.82, 0.00, 0.00}
+\definecolor{jbook}{cmyk} {0.28, 0.88, 0.79, 0.25}
+\definecolor{jrept}{cmyk} {0.07, 0.70, 1.00, 0.00}
+\definecolor{jmanu}{cmyk} {0.28, 0.77, 1.00, 0.23}
+\definecolor{junpu}{cmyk} {0.00, 0.83, 0.65, 0.00}
+
+
+\subsection{Complete Form}
+
+\newcommand{\CCom}[2]{\newline\textcolor{#1}{[#2]}}
+%\begin{thebibliography}{99} % Use for 10-99 references
+\begin{thebibliography}{9} % Use for 1-9 references
+
+ \bibitem{item:1-1}
+ A.~Alpha and B.~T.~Beta, “Novel techniques for future TeV electron accelerators”,
+ in \textit{Proc. 8th Int. Particle Accelerator Conf. (IPAC’17)},
+ Copenhagen, Denmark, May 2017,
+ pp. 567-569, \url{doi:10.18429/JACoW-IPAC2017-PAPERID}
+ \CCom{jgreen}{Conference Proceedings, two authors; DOI encouraged}
+
+ \bibitem{item:1-2}
+ A.~Alpha \emph{et al.},
+ “A new 12\,GHz electron linear accelerator”,
+ in \emph{Proc. 28th Linear Accelerator Conf. (LINAC’16)},
+ East Lansing, MI, USA, Sep. 2016, pp. 27-31, \newline
+ \url{doi:10.18429/JACoW-LINAC2016-PAPERID}
+ \CCom{jgreen}{Conference Proceedings, for six or more authors use \emph{et al.};
+ DOI encouraged}
+
+ \bibitem{item:1-3}
+ A.~Alpha, B.~T.~Beta, C.~Gamma, and D.~Delta,
+ “An overview of control systems”,
+ in \emph{Proc. 13th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS’11)}, Grenoble, France, Oct. 2011,
+ paper TUP014, pp. 89--91.
+ \CCom{jgreen}{Conference Proceedings, four authors; optional paper ID
+ in the absence of a DOI}
+\end{thebibliography}
+
+\vspace*{-.5\baselineskip}
+\subsection{Abbreviated Form}
+
+\begin{thebibliography}{9} % Use for 1-9 references
+ \bibitem{item:2-1}
+ A.~Alpha and B.~T.~Beta, “Novel techniques for future TeV electron accelerators”,
+ in \textit{Proc. IPAC’17}, Copenhagen, Denmark, May 2017,
+ pp. 567-569, \newline
+ \url{doi:10.18429/JACoW-IPAC2017-PAPERID}
+ \CCom{jgreen}{Conference Proceedings, two authors; DOI encouraged}
+
+ \bibitem{item:2-2}
+ A.~Alpha \emph{et al.},
+ “A new 12\,GHz electron linear accelerator”,
+ in \emph{Proc. LINAC’16},
+ East Lansing, MI, USA, Sep. 2016, pp.\,27-31,
+ \url{doi:10.18429/JACoW-LINAC2016-PAPERID}
+ \CCom{jgreen}{Conference Proceedings, for six or more authors use \emph{et al.};
+ DOI encouraged}
+
+ \bibitem{item:2-3}
+ A.~Alpha, B.~T.~Beta, C.~Gamma, and D.~Delta,
+ “An overview of control systems”,
+ in \emph{Proc. ICALEPCS’11}, Grenoble, France, Oct. 2011,
+ paper TUP014, pp. 89--91.
+ \CCom{jgreen}{Conference Proceedings, four authors; optional paper ID
+ in the absence of a DOI}
+\end{thebibliography}
+
+\section{UNPUBLISHED PAPER PRESENTED AT A PREVIOUS CONFERENCE}
+
+\subsection{Complete Form}
+
+\begin{thebibliography}{9} % Use for 1-9 references
+\setcounter{enumi}{3}
+ \bibitem{item:41}
+ A.~Alpha and B.~T.~Beta,
+ “An interesting talk but paper not submitted”,
+ presented at the 5th Int. Particle Accelerator Conf. (IPAC’14),
+ Dresden, Germany, Jun. 2014, paper MOAX01, unpublished.
+ \CCom{jred}{Unpublished paper; conference name in normal font; paper
+ ID may only be given if material supplementing the proceedings
+ exists on the JACoW website, e.\,g., PDF of talk}
+\end{thebibliography}
+
+\subsection{Abbreviated Form}
+
+\begin{thebibliography}{9} % Use for 1-9 references
+\setcounter{enumi}{3}
+ \bibitem{item:42}
+ A.~Alpha and B.~T.~Beta,
+ “An interesting talk but paper not submitted”,
+ presented at IPAC’14,
+ Dresden, Germany, Jun. 2014, paper MOAX01, unpublished.
+ \CCom{jred}{Unpublished paper; conference name in normal font; paper
+ ID may only be given if material supplementing the proceedings
+ exists on the JACoW website, e.\,g., PDF of talk}
+\end{thebibliography}
+
+
+\section{PAPER PRESENTED AT THE CURRENT CONFERENCE}
+
+\subsection{Complete Form}
+
+\begin{thebibliography}{9} % Use for 1-9 references
+\setcounter{enumi}{4}
+ \bibitem{item:51}
+ A.~Alpha and B.~T.~Beta,
+ “An interesting talk at this conference”,
+ presented at the 9th Int. Particle Accelerator
+ Conf. (IPAC’18), Vancouver, Canada, Apr.-May 2018,
+ paper MOAB01, this conference.
+ \CCom{jgrepc}{Current conference; conference name in normal font;
+ the wording “this conference” is optional}
+\end{thebibliography}
+
+\subsection{Abbreviated Form}
+
+\begin{thebibliography}{9} % Use for 1-9 references
+\setcounter{enumi}{4}
+ \bibitem{item:52}
+ “An interesting talk at this conference”,
+ presented at IPAC’18, Vancouver, Canada, Apr.-May 2018,
+ paper MOAB01, this conference.
+ \CCom{jgrepc}{Current conference; conference name in normal font;
+ the wording “this conference” is optional}
+\end{thebibliography}
+
+
+\vspace*{-.5\baselineskip}
+\section{PAPER PUBLISHED IN, OR SUBMITTED TO, A PERIODICAL}
+
+\begin{thebibliography}{99} % Use for 1-9 references
+ \setcounter{enumi}{5}
+ \bibitem{item:6}
+ P.~Mercury \emph{et al.},
+ “Title of paper published in journal”,
+ \emph{Phy.~Rev.~ Lett.}, vol. 114, no. 5,
+ p. 050511, Feb. 2014,
+ \url{doi:10.1103/PhysRevLett.114.050511}
+ \CCom{jblue}{Periodical, Phys. Rev. Lett.;
+ issue no. and month may be omitted}
+
+ \bibitem{item:7}
+ P.~Venus \emph{et al.},
+ “New techniques in laser wakefield accelerators”,
+ \emph{Phys. Rev. ST Accel. Beams}, vol. 18,
+ p. 120198, Dec.~2015, \newline
+ \url{doi:10.1103/PhysRevAccelBeams.18.120198}
+ \CCom{jblue}{Periodical, Phys. Rev. ST Accel. Beams;
+ month may be omitted}
+
+ \bibitem{item:8}
+ T.~Earth \emph{et al.},
+ “Low dose irradiation impact on modern silicon detectors”,
+ \emph{Nucl. Instr. Meth.}, vol. 692, pp. 256--280, 2014,
+ \url{doi:10.1016/j.nima.2014.11.022}
+ \CCom{jblue}{Periodical, Nucl. Instr. Method.}
+
+ \bibitem{item:9}
+ T.~Earth, L.~Moon, and A.~Belt,
+ “Temporal correlations of x-ray free electron lasers”,
+ \emph{Optics Express}, vol. 20, pp. 11396--11404, 2012,
+ \url{doi:10.1364/OE.20.11396}
+ \CCom{jblue}{Periodical, Optics Express}
+
+ \bibitem{item:10}
+ J.~B.~Good,
+ “A paper accepted for publication”,
+ \emph{Phys. Rev. Lett.}, to be published.
+ \CCom{jblue}{Periodical, paper accepted for publication
+ by Phys. Rev. Lett.}
+
+ \bibitem{item:11}
+ G.~D.~Read,
+ “Title of paper submitted for publication”,
+ submitted for publication.
+ \CCom{jblue}{Paper submitted for publication; the name of the
+ periodical does not appear}
+\end{thebibliography}
+
+\vspace*{-.5\baselineskip}
+\section{ONLINE SOURCE}
+
+\begin{thebibliography}{99} % Use for 1-9 references
+ \setcounter{enumi}{11}
+ \bibitem{item:121}
+ JACoW, \url{http://www.jacow.org}
+ \CCom{jvio}{online source; no hyperlink, no period at end of URL unless there is a
+ trailing “/” as shown below. A monospace font should be used, this is
+ achieved using the ‘url’ package in \LaTeX}
+
+ \setcounter{enumi}{11}
+ \bibitem{item:122}
+ JACoW, \url{http://www.jacow.org/}.
+ \CCom{jvio}{online source; no hyperlink, period after traling “/” in
+ URL allowed. A monospace font should be used, this is
+ achieved using the ‘url’ package in \LaTeX}
+
+\end{thebibliography}
+
+\section{CITATIONS TO BOOKS}
+
+\begin{thebibliography}{99} % Use for 1-9 references
+ \setcounter{enumi}{12}
+ \bibitem{item:13}
+ T.~Earth and L.~Moon,
+ “Title of chapter in the book”,
+ in \emph{Title of Book}, R Mars, Ed. New York, NY, USA:
+ Wiley, 1994, pp.~42--48.
+ \CCom{jbook}{Chapter in book}
+
+ \bibitem{item:14}
+ A.~Belt, \emph{Title of Book}. Cambridge, MA, USA:
+ MIT Press, 1986.
+ \CCom{jbook}{Book}
+\end{thebibliography}
+
+\section{REPORTS AND THESES}
+
+\begin{thebibliography}{99} % Use for 1-9 references
+ \setcounter{enumi}{14}
+ \bibitem{item:15}
+ G. Jupiter \emph{et al.},
+ “Title of report”, CERN, Geneva, Switzerland,
+ Rep. CERN-2012-333, Oct. 2012.
+ \CCom{jrept}{Report}
+
+ \bibitem{item:16}
+ A.~Student, “Title of thesis”,
+ Ph.D. thesis, Phys. Dept.,
+ Karlsruher Institut für Technologie, Karlsruhe,
+ Germany, 2014.
+ \CCom{jrept}{Thesis}
+\end{thebibliography}
+
+\section{MANUAL}
+
+\begin{thebibliography}{99} % Use for 1-9 references
+ \setcounter{enumi}{16}
+ \bibitem{item:17}
+ \emph{IEEE Editorial Style Manual},
+ IEEE Periodicals,
+ Piscataway, NJ, USA, Oct. 2014, pp. 34-52;
+ \url{http://www.ieee.org/documents/style_manual.pdf}
+ \CCom{jmanu}{Handbook/Manual, no hyperlink, no period after URL}
+\end{thebibliography}
+
+\section{PATENTS}
+
+\begin{thebibliography}{99} % Use for 1-9 references
+ \setcounter{enumi}{17}
+ \bibitem{item:18}
+ A.~N.~Inventor,
+ “Title of patent”,
+ Patent Authority and No., Jan. 20, 2016.
+
+\end{thebibliography}
+
+\section{UNPUBLISHED WORK AND PRIVATE COMMUNICATION}
+
+\begin{thebibliography}{99} % Use for 1-9 references
+ \setcounter{enumi}{18}
+ \bibitem{item:19}
+ P.~Neptune, “Title of paper”, unpublished.
+ \CCom{junpu}{Unpublished}
+
+ \bibitem{item:20}
+ P.~Uranus, private communication, Jun. 2015.
+ \CCom{junpu}{Private communication}
+
+\end{thebibliography}
+
+\newpage
+
+\twocolumn[\vspace*{-1.8ex}\section{ANNEX C:\endgraf THE DILIGENT AUTHOR’S CHECKLIST}\vspace*{\baselineskip}]
+\flushcolsend
+
+\subsection{Common Oversights}
+
+In order to lessen the load on a small team of editors
+and to help expedite publication of the Proceedings, authors
+are kindly asked to give themselves an extra few
+minutes to go over the following points, which highlight
+the most common errors, before uploading their paper. By
+providing a properly formatted JACoW paper, the Proceedings
+Office is able to benefit from an autodistill process
+which automatically converts the author's PDF file
+into a version that adheres to the JACoW-compliant PDF
+standard. The process further ensures that all fonts required
+to view the entire document are embedded, rendering
+a final PDF that qualifies technically for publication.
+
+
+\subsection{Author and Affiliation Listing}
+
+The names of authors and their affiliations should be in
+\SI{12}{pt} uppercase and lowercase letters, with standard,
+roman fonts (i.\,e., not italics). When there is more than
+one author, the submitting author should be first, followed
+by the coauthor. Coauthors should be grouped by affiliation
+and then be listed alphabetically. Please refer to \textbf{ANNEX~A}
+for further details and examples, particularly for
+the case where authors have multiple institutes.
+
+\subsection{SPMS Database and Final Manuscript Validation}
+
+Primary authors are reminded that it is their
+responsibility to verify the accuracy of the title, abstract,
+and coauthor/institute listing, and that these are identical
+in both the final manuscript and SPMS database. This is
+required to ensure the proper indexing of author/coauthor(s)
+appear in the published proceedings.
+
+\subsection{Subsection Headings}
+
+Subsection Headings are in \SI{12}{pt} \emph{italic} lowercase and uppercase.
+The initial letter of every principle word is capitalized,
+and the heading is left aligned in the column.
+
+\subsection{Figure Captions}
+
+Figure captions should be placed \emph{below} the figure and
+centred if on one line, but justified if spanning two or
+more lines:
+\begin{center}
+ Figure 1: A one line figure caption is centred.
+\end{center}
+\begin{justify}
+ Figure 2: A lengthy figure caption that spans
+ two lines is justified.
+\end{justify}
+Note the colon “:” after the figure number and the period
+“.” at the end of the caption.
+
+
+When referring to a figure from within the text, the
+convention is to use the abbreviated form, i.\,e., Fig.~1,
+\emph{unless} the reference to the figure is at the start of the sentence:
+\begin{quote}
+ Figure 1 shows a schematic view of...
+
+ ... as shown in Fig.~1.
+\end{quote}
+
+\subsection{Table Headings}
+
+Table captions should be placed \emph{above} the table and
+centred if on one line, but justified if spanning two or
+more lines:
+\begin{center}
+ Table 1: Table Heading
+\end{center}
+\begin{justify}
+ Table 2: A Particularly Long Table Heading
+ Spanning Two Lines
+\end{justify}
+
+Note the colon ":" after the table number, that the initial
+letters of the principle words in the table heading are
+capitalized, and the absence of a period at the end of the
+caption.
+
+When referring to a table from within the text, the convention
+is \emph{not} to abbreviate, i.\,e., Table 1.
+
+\subsection{Equations}
+
+If a displayed equation requires a number, it should be
+placed flush with the right margin of the column.
+
+\subsection{Units}
+
+An unbreakable space should always precede a unit. In \LaTeX{} use
+a “\verb|\,|” or the ‘siunitx’ package to format units.
+Examples are:
+\SI{3}{keV}, \SI{4}{GeV}, \SI{100}{kW}, \SI{7}{µm}.
+
+\subsection{References}
+
+References are written in \SI{9}{pt} size and should be neatly
+presented in a consistent format with reference numbers
+aligned. Please refer to \textbf{ANNEX~B} for the preferred format
+and proper alignment.
+
+Please also ensure that references in the text are cited in
+sequential order.
+
+\flushend
Property changes on: trunk/Master/texmf-dist/doc/latex/jacow/annexes-A4.tex
___________________________________________________________________
Added: svn:eol-style
## -0,0 +1 ##
+native
\ No newline at end of property
Added: trunk/Master/texmf-dist/doc/latex/jacow/annexes-US.tex
===================================================================
--- trunk/Master/texmf-dist/doc/latex/jacow/annexes-US.tex (rev 0)
+++ trunk/Master/texmf-dist/doc/latex/jacow/annexes-US.tex 2018-04-04 20:17:44 UTC (rev 47287)
@@ -0,0 +1,521 @@
+\twocolumn[\vspace*{-1.8ex}\section{ANNEX A:\endgraf FORMATTING OF AUTHORS AND AFFILIATIONS}\vspace*{\baselineskip}]
+
+\flushcolsend
+
+The names of authors, their organizations/affiliations
+and postal addresses should be grouped by affiliation and
+listed in \SI{12}{pt} upper- and lowercase letters. The name of
+the submitting or primary author should be first, followed
+by the coauthors, alphabetically by affiliation. If the
+author list for a given affiliation spans multiple lines,
+please be sure to break the line in a manner that does not
+split the author’s initials from the author’s last name. This
+is easily done by placing unbreakable spaces between the
+initials and last name. The affiliation name and address
+are also best kept together on the same (but not necessarily
+separate) line, wherever possible. (See, for example,
+the entry for GSI in the following). In cases where authors
+have multiple affiliations, the secondary affiliation is
+inserted below the author/primary affiliation listing and is
+indicated with a superscript, as shown in the following.
+
+
+Footnotes on the title and author lines may be used for
+acknowledgements and e-mail addresses, using a non-numeric
+sequence of characters (\textsuperscript{*}, \textsuperscript{†},
+\textsuperscript{‡}, \textsuperscript{§}, \textsuperscript{\P}
+as generated by \LaTeX's \verb|\footnote| command).
+
+For examples of the preferred formatting of authors and
+affiliations, please consult the following list of JACoW
+collaboration members.
+
+For manuscripts submitted by large collaborations with
+potentially many tens of authors and where, additionally,
+there may be page number limitations, a format consisting
+of the principle author’s name and institute, followed by
+“on behalf of the … collaboration”, is preferred.
+
+
+\clearpage
+%
+% Include the title/author page of the JACoW Coolaboration
+%
+\includepdf[pages=-, noautoscale, pagecommand={}]{jacow-collaboration-2018.pdf}{}
+
+\clearpage
+
+\twocolumn[\vspace*{-1.8ex}\section{ANNEX B:\endgraf IEEE REFERENCE STYLE GUIDE AS APPLIED TO \NoCaseChange{JACoW} PAPERS, \break PERIODICALS AND OTHER WORKS}\vspace*{\baselineskip}]
+
+\subsection{Referencing JACoW Proceedings}
+
+The format for published JACoW proceedings papers is detailed in the following
+and can also be readily deduced from Refs. [1-3]. At the very minimum, sufficient
+information should be given to enable readers to clearly identify the paper and
+to facilitate its import into digital databases.
+\vspace*{-.6\baselineskip}
+
+\subsubsection{Author Listing} Careful attention should be given to the
+placing of commas and the use of ‘and’ in the author list.
+In particular, for the case of three or more authors
+(as in [3]), a comma also follows the penultimate author.
+The preference for ‘\emph{et al.}’\ takes precedence when the number
+of authors becomes large (e.g., $>$6).
+\vspace*{-.6\baselineskip}
+
+\subsubsection{Paper Title} As is modern practice in references, the title
+of the paper is written in sentence case, i.e., only the
+initial letter of the first word in the title is capitalized.
+Proper nouns, however, also have a capital. Capital letters
+appearing in acronyms likewise remain unaltered
+\vspace*{-.6\baselineskip}
+
+\subsubsection{Conference Proceedings} The proceedings title is
+written in title case in italics using standard abbreviations,
+such as \emph{Int.} and \emph{Conf.} The preposition, ``in'', in normal
+font, precedes the proceedings title. The location,
+i.\,e., city, state (if USA), and country of the conference
+venue, the month (three-letter abbreviation) and the year
+the conference took place, is then listed. Finally, details
+pertaining to the paper itself, such as the conference paper
+ID, mandatory page numbers, and the digital object
+identifier (DOI), if existing, are listed in the given order.
+A monospace font for the DOI is used so as to help
+distinguish it from normal text. In \LaTeX{}
+the ‘url’ package is used. The conference
+paper ID is optional and may be included in the absence
+of a DOI to facilitate a search through internet search
+engines. DOIs have been assigned to all JACoW
+publications appearing in recent proceedings and will
+likewise be assigned to articles from conferences further
+past, in due course. The use of DOIs is strongly
+emphasized.
+
+The complete or abbreviated form for citations, as
+shown in the following section, is advocated. The former
+is more informative to readers outside the immediate
+conference sphere, and will further serve to avoid
+potential ambiguities in cases where an acronym is not
+unique. Both forms, however, when adhered to, ensure a
+proper import into digital libraries and information
+sources such as INSPIRE, Scopus, and Google Scholar.
+Authors are also reminded to make a distinction between
+papers published in JACoW proceedings (which have
+page numbers and, in the case of recent publications,
+DOIs) and those papers that may have been presented at
+past JACoW conferences but were not published~[4].
+References to contributions presented at the same
+conference should be written as shown in [5]; the wording
+“this conference” may be optionally appended.
+
+\subsection{Referencing Periodicals and Other Sources}
+
+The IEEE style is also shown for periodicals [6-11],
+online sources [12], books [13, 14], internal reports [15],
+theses [16], manuals or handbooks [17], patents [18] and
+unpublished material [19, 20]. Examples of correctly
+formatted references can also be found at the JACoW website,
+under ‘Formatting Citations’ which is reached through the
+‘for Authors’ link.
+
+\subsection{Alignment of References}
+
+In the \LaTeX{} template, \verb|\bibliography{9}| is used for
+when the total number of references is less than ten. This
+should be changed to \verb|\bibliography{99}| if the number of
+references is ten or more.
+
+\patchcmd\thebibliography{\section*{REFERENCES\@mkboth {REFERENCES}{REFERENCES}}}{}{}{}
+\section{PAPER PUBLISHED IN A CONFERENCE PROCEEDINGS}
+
+\definecolor{jgreen}{cmyk}{0.81, 0.00, 0.97, 0.00}
+\definecolor{jred}{cmyk} {0.00, 0.99, 1.00, 0.00}
+\definecolor{jgrepc}{cmyk}{0.74, 0.05, 1.00, 0.00}
+\definecolor{jblue}{cmyk} {0.87, 0.54, 0.00, 0.00}
+\definecolor{jvio}{cmyk} {0.41, 0.82, 0.00, 0.00}
+\definecolor{jbook}{cmyk} {0.28, 0.88, 0.79, 0.25}
+\definecolor{jrept}{cmyk} {0.07, 0.70, 1.00, 0.00}
+\definecolor{jmanu}{cmyk} {0.28, 0.77, 1.00, 0.23}
+\definecolor{junpu}{cmyk} {0.00, 0.83, 0.65, 0.00}
+
+
+\subsection{Complete Form}
+
+\newcommand{\CCom}[2]{\newline\textcolor{#1}{[#2]}}
+%\begin{thebibliography}{99} % Use for 10-99 references
+\begin{thebibliography}{9} % Use for 1-9 references
+
+ \bibitem{item:1-1}
+ A.~Alpha and B.~T.~Beta, “Novel techniques for future TeV electron accelerators,”
+ in \textit{Proc. 8th Int. Particle Accelerator Conf. (IPAC’17)},
+ Copenhagen, Denmark, May 2017,
+ pp. 567-569, \url{doi:10.18429/JACoW-IPAC2017-PAPERID}
+ \CCom{jgreen}{Conference Proceedings, two authors; DOI encouraged}
+
+ \bibitem{item:1-2}
+ A.~Alpha \emph{et al.},
+ “A new 12\,GHz electron linear accelerator,”
+ in \emph{Proc. 28th Linear Accelerator Conf. (LINAC’16)},
+ East Lansing, MI, USA, Sep. 2016, pp. 27-31, \newline
+ \url{doi:10.18429/JACoW-LINAC2016-PAPERID}
+ \CCom{jgreen}{Conference Proceedings, for six or more authors use \emph{et al.};
+ DOI encouraged}
+
+ \bibitem{item:1-3}
+ A.~Alpha, B.~T.~Beta, C.~Gamma, and D.~Delta,
+ “An overview of control systems,”
+ in \emph{Proc. 13th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS’11)}, Grenoble, France, Oct. 2011,
+ paper TUP014, pp. 89--91.
+ \CCom{jgreen}{Conference Proceedings, four authors; optional paper ID
+ in the absence of a DOI}
+\end{thebibliography}
+
+\vspace*{-.5\baselineskip}
+\subsection{Abbreviated Form}
+
+\begin{thebibliography}{9} % Use for 1-9 references
+ \bibitem{item:2-1}
+ A.~Alpha and B.~T.~Beta, “Novel techniques for future TeV electron accelerators,”
+ in \textit{Proc. IPAC’17}, Copenhagen, Denmark, May 2017,
+ pp. 567-569, \newline
+ \url{doi:10.18429/JACoW-IPAC2017-PAPERID}
+ \CCom{jgreen}{Conference Proceedings, two authors; DOI encouraged}
+
+ \bibitem{item:2-2}
+ A.~Alpha \emph{et al.},
+ “A new 12\,GHz electron linear accelerator,”
+ in \emph{Proc. LINAC’16},
+ East Lansing, MI, USA, Sep. 2016, pp.\,27-31,
+ \url{doi:10.18429/JACoW-LINAC2016-PAPERID}
+ \CCom{jgreen}{Conference Proceedings, for six or more authors use \emph{et al.};
+ DOI encouraged}
+
+ \bibitem{item:2-3}
+ A.~Alpha, B.~T.~Beta, C.~Gamma, and D.~Delta,
+ “An overview of control systems,”
+ in \emph{Proc. ICALEPCS’11}, Grenoble, France, Oct. 2011,
+ paper TUP014, pp. 89--91.
+ \CCom{jgreen}{Conference Proceedings, four authors; optional paper ID
+ in the absence of a DOI}
+\end{thebibliography}
+
+\section{UNPUBLISHED PAPER PRESENTED AT A PREVIOUS CONFERENCE}
+
+
+\subsection{Complete Form}
+
+\begin{thebibliography}{9} % Use for 1-9 references
+\setcounter{enumi}{3}
+ \bibitem{item:41}
+ A.~Alpha and B.~T.~Beta,
+ “An interesting talk but paper not submitted,”
+ presented at the 5th Int. Particle Accelerator Conf. (IPAC’14),
+ Dresden, Germany, Jun. 2014, paper MOAX01, unpublished.
+ \CCom{jred}{Unpublished paper; conference name in normal font; paper
+ ID may only be given if material supplementing the proceedings
+ exists on the JACoW website, e.\,g., PDF of talk}
+\end{thebibliography}
+
+\subsection{Abbreviated Form}
+
+\begin{thebibliography}{9} % Use for 1-9 references
+\setcounter{enumi}{3}
+ \bibitem{item:42}
+ A.~Alpha and B.~T.~Beta,
+ “An interesting talk but paper not submitted,”
+ presented at IPAC’14,
+ Dresden, Germany, Jun. 2014, paper MOAX01, unpublished.
+ \CCom{jred}{Unpublished paper; conference name in normal font; paper
+ ID may only be given if material supplementing the proceedings
+ exists on the JACoW website, e.\,g., PDF of talk}
+\end{thebibliography}
+
+
+\section{PAPER PRESENTED AT THE CURRENT CONFERENCE}
+
+\subsection{Complete Form}
+
+\begin{thebibliography}{9} % Use for 1-9 references
+\setcounter{enumi}{4}
+ \bibitem{item:51}
+ A.~Alpha and B.~T.~Beta,
+ “An interesting talk at this conference,”
+ presented at the 9th Int. Particle Accelerator
+ Conf. (IPAC’18), Vancouver, Canada, Apr.-May 2018,
+ paper MOAB01, this conference.
+ \CCom{jgrepc}{Current conference; conference name in normal font;
+ the wording “this conference” is optional}
+\end{thebibliography}
+
+\subsection{Abbreviated Form}
+
+\begin{thebibliography}{9} % Use for 1-9 references
+\setcounter{enumi}{4}
+ \bibitem{item:52}
+ “An interesting talk at this conference,”
+ presented at IPAC’18, Vancouver, Canada, Apr.-May 2018,
+ paper MOAB01, this conference.
+ \CCom{jgrepc}{Current conference; conference name in normal font;
+ the wording “this conference” is optional}
+\end{thebibliography}
+
+
+\vspace*{-.5\baselineskip}
+\section{PAPER PUBLISHED IN, OR SUBMITTED TO, A PERIODICAL}
+
+\begin{thebibliography}{99} % Use for 1-9 references
+ \setcounter{enumi}{5}
+ \bibitem{item:6}
+ P.~Mercury \emph{et al.},
+ “Title of paper published in journal,”
+ \emph{Phy.~Rev.~ Lett.}, vol. 114, no. 5,
+ p. 050511, Feb. 2014,
+ \url{doi:10.1103/PhysRevLett.114.050511}
+ \CCom{jblue}{Periodical, Phys. Rev. Lett.;
+ issue no. and month may be omitted}
+
+ \bibitem{item:7}
+ P.~Venus \emph{et al.},
+ “New techniques in laser wakefield accelerators,”
+ \emph{Phys. Rev. ST Accel. Beams}, vol. 18,
+ p. 120198, Dec.~2015, \newline
+ \url{doi:10.1103/PhysRevAccelBeams.18.120198}
+ \CCom{jblue}{Periodical, Phys. Rev. ST Accel. Beams;
+ month may be omitted}
+
+ \bibitem{item:8}
+ T.~Earth \emph{et al.},
+ “Low dose irradiation impact on modern silicon detectors,”
+ \emph{Nucl. Instr. Meth.}, vol. 692, pp. 256--280, 2014,
+ \url{doi:10.1016/j.nima.2014.11.022}
+ \CCom{jblue}{Periodical, Nucl. Instr. Method.}
+
+ \bibitem{item:9}
+ T.~Earth, L.~Moon, and A.~Belt,
+ “Temporal correlations of x-ray free electron lasers,”
+ \emph{Optics Express}, vol. 20, pp. 11396--11404, 2012,
+ \url{doi:10.1364/OE.20.11396}
+ \CCom{jblue}{Periodical, Optics Express}
+
+ \bibitem{item:10}
+ J.~B.~Good,
+ “A paper accepted for publication,”
+ \emph{Phys. Rev. Lett.}, to be published.
+ \CCom{jblue}{Periodical, paper accepted for publication
+ by Phys. Rev. Lett.}
+
+ \bibitem{item:11}
+ G.~D.~Read,
+ “Title of paper submitted for publication,”
+ submitted for publication.
+ \CCom{jblue}{Paper submitted for publication; the name of the
+ periodical does not appear}
+\end{thebibliography}
+
+\vspace*{-.5\baselineskip}
+\section{ONLINE SOURCE}
+
+\begin{thebibliography}{99} % Use for 1-9 references
+ \setcounter{enumi}{11}
+ \bibitem{item:121}
+ JACoW, \url{http://www.jacow.org}
+ \CCom{jvio}{online source; no hyperlink, no period at end of URL unless there is a
+ trailing “/” as shown below. A monospace font should be used, this is
+ achieved using the ‘url’ package in \LaTeX}
+
+ \setcounter{enumi}{11}
+ \bibitem{item:122}
+ JACoW, \url{http://www.jacow.org/}.
+ \CCom{jvio}{online source; no hyperlink, period after traling “/” in
+ URL allowed. A monospace font should be used, this is
+ achieved using the ‘url’ package in \LaTeX}
+
+\end{thebibliography}
+
+\section{CITATIONS TO BOOKS}
+
+\begin{thebibliography}{99} % Use for 1-9 references
+ \setcounter{enumi}{12}
+ \bibitem{item:13}
+ T.~Earth and L.~Moon,
+ “Title of chapter in the book,”
+ in \emph{Title of Book}, R Mars, Ed. New York, NY, USA:
+ Wiley, 1994, pp.~42--48.
+ \CCom{jbook}{Chapter in book}
+
+ \bibitem{item:14}
+ A.~Belt, \emph{Title of Book}. Cambridge, MA, USA:
+ MIT Press, 1986.
+ \CCom{jbook}{Book}
+\end{thebibliography}
+
+\section{REPORTS AND THESES}
+
+\begin{thebibliography}{99} % Use for 1-9 references
+ \setcounter{enumi}{14}
+ \bibitem{item:15}
+ G. Jupiter \emph{et al.},
+ “Title of report,” CERN, Geneva, Switzerland,
+ Rep. CERN-2012-333, Oct. 2012.
+ \CCom{jrept}{Report}
+
+ \bibitem{item:16}
+ A.~Student, “Title of thesis,”
+ Ph.D. thesis, Phys. Dept.,
+ Karlsruher Institut für Technologie, Karlsruhe,
+ Germany, 2014.
+ \CCom{jrept}{Thesis}
+\end{thebibliography}
+
+\section{MANUAL}
+
+\begin{thebibliography}{99} % Use for 1-9 references
+ \setcounter{enumi}{16}
+ \bibitem{item:17}
+ \emph{IEEE Editorial Style Manual},
+ IEEE Periodicals,
+ Piscataway, NJ, USA, Oct. 2014, pp. 34-52;
+ \url{http://www.ieee.org/documents/style_manual.pdf}
+ \CCom{jmanu}{Handbook/Manual, no hyperlink, no period after URL}
+\end{thebibliography}
+
+\section{PATENTS}
+
+\begin{thebibliography}{99} % Use for 1-9 references
+ \setcounter{enumi}{17}
+ \bibitem{item:18}
+ A.~N.~Inventor,
+ “Title of patent,”
+ Patent Authority and No., Jan. 20, 2016.
+
+\end{thebibliography}
+
+\section{UNPUBLISHED WORK AND PRIVATE COMMUNICATION}
+
+\begin{thebibliography}{99} % Use for 1-9 references
+ \setcounter{enumi}{18}
+ \bibitem{item:19}
+ P.~Neptune, “Title of paper,” unpublished.
+ \CCom{junpu}{Unpublished}
+
+ \bibitem{item:20}
+ P.~Uranus, private communication, Jun. 2015.
+ \CCom{junpu}{Private communication}
+
+\end{thebibliography}
+
+\newpage
+
+\twocolumn[\vspace*{-1.8ex}\section{ANNEX C:\endgraf THE DILIGENT AUTHOR’S CHECKLIST}\vspace*{\baselineskip}]
+\flushcolsend
+
+\subsection{Common Oversights}
+
+In order to lessen the load on a small team of editors
+and to help expedite publication of the Proceedings, authors
+are kindly asked to give themselves an extra few
+minutes to go over the following points, which highlight
+the most common errors, before uploading their paper. By
+providing a properly formatted JACoW paper, the Proceedings
+Office is able to benefit from an autodistill process
+which automatically converts the author's PDF file
+into a version that adheres to the JACoW-compliant PDF
+standard. The process further ensures that all fonts required
+to view the entire document are embedded, rendering
+a final PDF that qualifies technically for publication.
+
+
+\subsection{Author and Affiliation Listing}
+
+The names of authors and their affiliations should be in
+\SI{12}{pt} uppercase and lowercase letters, with standard,
+roman fonts (i.\,e., not italics). When there is more than
+one author, the submitting author should be first, followed
+by the coauthor. Coauthors should be grouped by affiliation
+and then be listed alphabetically. Please refer to \textbf{ANNEX~A}
+for further details and examples, particularly for
+the case where authors have multiple institutes.
+
+\subsection{SPMS Database and Final Manuscript Validation}
+
+Primary authors are reminded that it is their
+responsibility to verify the accuracy of the title, abstract,
+and coauthor/institute listing, and that these are identical
+in both the final manuscript and SPMS database. This is
+required to ensure the proper indexing of author/coauthor(s)
+appear in the published proceedings.
+
+\subsection{Subsection Headings}
+
+Subsection Headings are in \SI{12}{pt} \emph{italic} lowercase and uppercase.
+The initial letter of every principle word is capitalized,
+and the heading is left aligned in the column.
+
+\subsection{Figure Captions}
+
+Figure captions should be placed \emph{below} the figure and
+centred if on one line, but justified if spanning two or
+more lines:
+\begin{center}
+ Figure 1: A one line figure caption is centred.
+\end{center}
+\begin{justify}
+ Figure 2: A lengthy figure caption that spans
+ two lines is justified.
+\end{justify}
+Note the colon “:” after the figure number and the period
+“.” at the end of the caption.
+
+When referring to a figure from within the text, the
+convention is to use the abbreviated form, i.\,e., Fig.~1,
+\emph{unless} the reference to the figure is at the start of the sentence:
+\begin{quote}
+ Figure 1 shows a schematic view of...
+
+ ... as shown in Fig.~1.
+\end{quote}
+
+\subsection{Table Headings}
+
+Table captions should be placed \emph{above} the table and
+centred if on one line, but justified if spanning two or
+more lines:
+\begin{center}
+ Table 1: Table Heading
+\end{center}
+\begin{justify}
+ Table 2: A Particularly Long Table Heading
+ Spanning Two Lines
+\end{justify}
+
+Note the colon ":" after the table number, that the initial
+letters of the principle words in the table heading are
+capitalized, and the absence of a period at the end of the
+caption.
+
+When referring to a table from within the text, the convention
+is \emph{not} to abbreviate, i.\,e., Table 1.
+
+\subsection{Equations}
+
+If a displayed equation requires a number, it should be
+placed flush with the right margin of the column.
+
+\subsection{Units}
+
+An unbreakable space should always precede a unit. In \LaTeX{} use
+a “\verb|\,|” or the ‘siunitx’ package to format units.
+Examples are:
+\SI{3}{keV}, \SI{4}{GeV}, \SI{100}{kW}, \SI{7}{µm}.
+
+\subsection{References}
+
+References are written in \SI{9}{pt} size and should be neatly
+presented in a consistent format with reference numbers
+aligned. Please refer to \textbf{ANNEX~B} for the preferred format
+and proper alignment.
+
+Please also ensure that references in the text are cited in
+sequential order.
+
+\flushend
Property changes on: trunk/Master/texmf-dist/doc/latex/jacow/annexes-US.tex
___________________________________________________________________
Added: svn:eol-style
## -0,0 +1 ##
+native
\ No newline at end of property
Deleted: trunk/Master/texmf-dist/doc/latex/jacow/jacow-collaboration-2016.pdf
===================================================================
(Binary files differ)
Deleted: trunk/Master/texmf-dist/doc/latex/jacow/jacow-collaboration-2016.tex
===================================================================
--- trunk/Master/texmf-dist/doc/latex/jacow/jacow-collaboration-2016.tex 2018-04-04 20:17:27 UTC (rev 47286)
+++ trunk/Master/texmf-dist/doc/latex/jacow/jacow-collaboration-2016.tex 2018-04-04 20:17:44 UTC (rev 47287)
@@ -1,79 +0,0 @@
-\documentclass[a4paper,
-%boxit,
-%titlepage, % separate title page
-%refpage % separate references
-]{jacow}
-
-
-\makeatother
-
-% CHECK FOR XeTeX/LuaTeX BEFORE DEFINING AN INPUT ENCODING
-% --------------------------------------------------------
-%
-%
-\ifboolexpr{bool{xetex} or bool{luatex}} % test for XeTeX/LuaTeX
-{} % input encoding is utf8 by default
-{\usepackage[utf8]{inputenc}} % switch to utf8
-
-\usepackage[USenglish]{babel}
-\usepackage{multirow}
-
-%
-% if BibLaTeX is used
-%
-\ifboolexpr{bool{jacowbiblatex}}%
-{%
- \addbibresource{jacow-test.bib}
- \addbibresource{biblatex-examples.bib}
-}{}
-\listfiles
-
-\begin{document}
- \title{THE \NoCaseChange{JACoW} COLLABORATION\thanks{As of 2016\newline \hspace*{-.8em}Templates are managed by:}}
-
- \author{J. Poole\textsuperscript{1}, R. Billen, C. Carli, C. Petit-Jean-Genaz, CERN, 1211 Geneva 23,
- Switzerland \\
- C. E. Eyberger, M. Power, Argonne National Laboratory, Lemont, IL 60439, USA \\
- I. Costa, D. López Nonell, ALBA Synchrotron, 08290 Cerdanyola de Vallès, Barcelona, Spain \\
- D. Button, ANSTO, Lucas Heights, NSW 2234, Australia \\
- K. Riches, Australian Synchrotron, Clayton, VIC 3168, Australia \\
- J. Piton, L. Sanfelici, Brazilian Synchrontron Light Laboratory, 13083-970 Campinas, Brazil \\
- C. Hoffman, Brookhaven National Laboratory, Upton, NY 11973, USA \\
- M. V. Kuzin, Budker Institute of Nuclear Physics, 630090 Novosibirsk, Russia \\
- M. Marx, Deutsches Elektronen-Synchrotron, 22607 Hamburg, Germany \\
- I. Andrian\thanks{ivan.andrian at elettra.eu (OpenDocument)},
- S. Deiuri, Elettra Sincrotrone Trieste, 34149 Basovizza, Italy \\
- J. Olander, J. Pranke, G. Trahern, European Spallation Source, 221 00 Lund, Sweden \\
- M. Arena, Fermilab, Batavia IL 60510, USA \\
- M. Bai, Forschungszentrum Jülich, 52425 Jülich, Germany \\
- R. Müller, V. R. W. Schaa\thanks{v.r.w.schaa at gsi.de (\LaTeX)}, \\
- GSI Helmholtzzentrum für Schwerionenforschung, 64291 Darmstadt, Germany \\
- I. Izotov, Institute of Applied Physics, 603950 Nizhny Novgorod, Russia \\
- N. Zhao, Institute of High Energy Physics, Beijing 100049, P. R. China \\
- Y. H. Chin, K. Furukawa, T. Kosuge, T. Murakami, A. Shirakawa, \\
- KEK, Tsukuba, Ibaraki 305-0801, Japan \\
- S. Choi, Korea Basic Science Institute, 609-735 Busan, Korea \\
- J. Chew, Lawrence Berkeley National Laboratory, Berkeley, CA 04720, USA \\
- K. A. Bishofberger, Los Alamos National Laboratory, Los Alamos, NM 87545, USA \\
- V. G. Mitts, CAMD, Louisiana State University, Baton Rouge, LA 70806, USA \\
- K. Makino, Michigan State University, East Lansing, MI 48824, USA \\
- A. McCausey, FRIB, Michigan State University, East Lansing, MI 48824, USA \\
- T. Tanaka, LEBRA, Nihon University, Funabashi 274-8501, Japan \\
- C. Horak, Oak Ridge National Laboratory, Oak Ridge, TN 37831, USA \\
- J. Chrin\thanks{jan.chrin at psi.ch (MS Word)}, Paul Scherrer Institut, 5232 Villigen PSI, Switzerland \\
- L. Eun, K. G. Hwa, D.-E. Kim, K.-S. Kim, Pohang Accelerator Laboratory, Gyeongbuk, Korea \\
- K. Yamada, RIKEN, Wako, Saitama 351-0198, Japan \\
- Y. Leng, H. Xin, H. Yan, Shanghai Institute of Applied Physics, Shanghai 201800, P. R. China \\
- M. Montes-Loera, SLAC National Accelerator Laboratory, Menlo Park, CA 94025, USA \\
- S. Waller, STFC Daresbury Laboratory, Warrington, WA4 4AD, UK \\
- L. Liljeby, Stockholm University, 10691 Stockholm, Sweden \\
- E. Akers, A. Cuffe, T. Satogata\thanks{todd.satogata at jlab.org (MS Word for Mac)},\\
- Thomas Jefferson National Accelerator Facility, Newport News, VA 23606, USA \\
- J. Thomson, TRIUMF, Vancouver, BC V6T 2A3, Canada \\
- \textsuperscript{1}also at JP Scientific (Nantwich) Ltd, UK}
-
- \maketitle
-
-\raggedend
-
-\end{document}
Added: trunk/Master/texmf-dist/doc/latex/jacow/jacow-collaboration-2018.pdf
===================================================================
(Binary files differ)
Index: trunk/Master/texmf-dist/doc/latex/jacow/jacow-collaboration-2018.pdf
===================================================================
--- trunk/Master/texmf-dist/doc/latex/jacow/jacow-collaboration-2018.pdf 2018-04-04 20:17:27 UTC (rev 47286)
+++ trunk/Master/texmf-dist/doc/latex/jacow/jacow-collaboration-2018.pdf 2018-04-04 20:17:44 UTC (rev 47287)
Property changes on: trunk/Master/texmf-dist/doc/latex/jacow/jacow-collaboration-2018.pdf
___________________________________________________________________
Added: svn:mime-type
## -0,0 +1 ##
+application/pdf
\ No newline at end of property
Added: trunk/Master/texmf-dist/doc/latex/jacow/jacow-collaboration-2018.tex
===================================================================
--- trunk/Master/texmf-dist/doc/latex/jacow/jacow-collaboration-2018.tex (rev 0)
+++ trunk/Master/texmf-dist/doc/latex/jacow/jacow-collaboration-2018.tex 2018-04-04 20:17:44 UTC (rev 47287)
@@ -0,0 +1,75 @@
+% !TeX program = lualatex
+% !TeX encoding = utf8
+%
+\documentclass[a4paper,
+ %boxit,
+ %titlepage, % separate title page
+ %refpage % separate references
+ ]{jacow}
+
+\usepackage[USenglish]{babel}
+\renewcommand{\baselinestretch}{0.9535417264123889}
+%%
+%% Lengths for the spaces in the title
+\setlength\titleblockstartskip{0pt} %before title, default 3pt
+%\setlength\titleblockmiddleskip{.3\baselineskip} %between title + author, default 1em
+%\setlength\titleblockendskip{.0\baselineskip} %afterauthor, default 1em
+
+
+\begin{document}
+ \title{THE \NoCaseChange{JACoW} COLLABORATION\thanks{\mbox{As of Nov 2017, JACoW Collaboration Team Meeting Templates are managed by the collaboration and implemented by:}}}
+
+ \author{C. Petit-Jean-Genaz, J. Poole\textsuperscript{1}, T. Baron, R. Billen,
+ P. Ferreira, N. Juszka, M. Kołodziejski,\\
+ A. Mönnich, M. Vidal, CERN, 1211 Geneva 23, Switzerland \\
+ C. E. Eyberger, M. Power, Argonne National Laboratory, Lemont, IL 60439, USA \\
+ I. Costa, ALBA Synchrotron, 08290 Cerdanyola del Vallès, Barcelona, Spain \\
+ D. Button, M. Hewes, ANSTO, Lucas Heights NSW 2234, Australia \\
+ R. Dowd, K. Riches, N. White, ANSTO, Clayton VIC 3168, Australia \\
+ R. Picoreti, J. Piton, L. Sanfelici\\
+ Brazilian Synchrontron Light Laboratory, 13083-970 Campinas, Brazil \\
+ C. Hoffman, Brookhaven National Laboratory, Upton, NY 11973, USA \\
+ M. V. Kuzin, Budker Institute of Nuclear Physics, 630090 Novosibirsk, Russia \\
+ L. Serani, Centre d’Etudes Nucléaires de Bordeaux Gradignan, \\
+ Université de Bordeaux/IN2P3/CNRS, 33175 Gradignan, France \\
+ M. Marx, Deutsches Elektronen-Synchrotron, 22607 Hamburg, Germany \\
+ I. Andrian\thanks{ivan.andrian at elettra.eu (OpenDocument)},
+ S. Deiuri, Elettra Sincrotrone Trieste, 34149 Basovizza, Italy \\
+ J. Olander, G. Trahern, European Spallation Source, 221 00 Lund, Sweden \\
+ M. Arena, Fermilab, Batavia IL 60510, USA \\
+ K. Turzo, Grand Accélérateur National d'Ions Lourds, 14076 Caen, France \\
+ R. Müller, V. R. W. Schaa\thanks{v.r.w.schaa at gsi.de (\LaTeX)} \\
+ GSI Helmholtzzentrum für Schwerionenforschung, 64291 Darmstadt, Germany \\
+ Y.-Y Li, Hong Kong University of Science and Technology, Kowloon, Hong Kong \\
+ P. Pisciotta, INFN-LNS, 95123 Catania, Italy \\
+ N. Zhao, Institute of High Energy Physics, Beijing 100049, P. R. China \\
+ L. Li, Institute of Modern Physics, Lanzhou 730000, P. R. China \\
+ J. G. de Villiers, J. Mira, iThemba Labs, P.O. Box 722, Somerset West 7130, South Africa \\
+ Y. H. Chin, K. Furukawa, T. Kosuge, A. Shirakawa,
+ KEK, Tsukuba, Ibaraki 305-0801, Japan \\
+ K. A. Bishofberger, Los Alamos National Laboratory, Los Alamos, NM 87545, USA \\
+ V. G. Mitts, CAMD, Louisiana State University, Baton Rouge, LA 70806, USA \\
+ K. Makino, A. McCausey, Michigan State University, East Lansing, MI 48824, USA \\
+% A. McCausey, FRIB, Michigan State University, East Lansing, MI 48824, USA \\
+ T. Tanaka, LEBRA, Nihon University, Funabashi 274-8501, Japan \\
+ C. Horak, Oak Ridge National Laboratory, Oak Ridge, TN 37831, USA \\
+ Y.-S. Cheng \\
+ National Synchrotron Radiation Research Center, Hsinchu 30076, Taiwan, Republic of China \\
+ J. Chrin\thanks{jan.chrin at psi.ch (MS Word)}, Paul Scherrer Institut, 5232 Villigen PSI, Switzerland \\
+ D.-E. Kim, G.-H. Kim, K.-S. Kim, N.-Y. Kim, E.-H. Lee \\
+ Pohang Accelerator Laboratory, Gyeongbuk, Korea\\
+ A. Uchiyama, K. Yamada, RIKEN, Wako, Saitama 351-0198, Japan \\
+ H. Chen, X. Han, W. Qi, Shanghai Institute of Applied Physics, Shanghai 201800, P. R. China \\
+ M. Montes-Loera, SLAC National Accelerator Laboratory, Menlo Park, CA 94025, USA \\
+ S. Waller, STFC Daresbury Laboratory, Warrington, WA4 4AD, UK \\
+ M. Tilmont, Synchrotron Soleil, Saint-Aubin, 91192 Gif-sur-Yvette, France \\
+ E. Akers, A. Cuffe, T. Satogata\thanks{todd.satogata at jlab.org (MS Word for Mac)} \\
+ Thomas Jefferson National Accelerator Facility, Newport News, VA 23606, USA \\
+ J. Thomson, TRIUMF, Vancouver, BC V6T 2A3, Canada \\
+ \textsuperscript{1}also at JP Scientific (Nantwich) Ltd, UK}
+
+ \maketitle
+
+\raggedend
+
+\end{document}
Property changes on: trunk/Master/texmf-dist/doc/latex/jacow/jacow-collaboration-2018.tex
___________________________________________________________________
Added: svn:eol-style
## -0,0 +1 ##
+native
\ No newline at end of property
Added: trunk/Master/texmf-dist/doc/latex/jacow/jacow2017.jpg
===================================================================
(Binary files differ)
Index: trunk/Master/texmf-dist/doc/latex/jacow/jacow2017.jpg
===================================================================
--- trunk/Master/texmf-dist/doc/latex/jacow/jacow2017.jpg 2018-04-04 20:17:27 UTC (rev 47286)
+++ trunk/Master/texmf-dist/doc/latex/jacow/jacow2017.jpg 2018-04-04 20:17:44 UTC (rev 47287)
Property changes on: trunk/Master/texmf-dist/doc/latex/jacow/jacow2017.jpg
___________________________________________________________________
Added: svn:mime-type
## -0,0 +1 ##
+application/octet-stream
\ No newline at end of property
Modified: trunk/Master/texmf-dist/tex/latex/jacow/jacow.cls
===================================================================
--- trunk/Master/texmf-dist/tex/latex/jacow/jacow.cls 2018-04-04 20:17:27 UTC (rev 47286)
+++ trunk/Master/texmf-dist/tex/latex/jacow/jacow.cls 2018-04-04 20:17:44 UTC (rev 47287)
@@ -104,9 +104,39 @@
% statement (lppl1.3c) as preparation for publication on CTAN.
% Volker RW Schaa, 02 May 2014
%
-\def\fileversion{1.95}
-\def\filedate{2016/05/10}
-\def\docdate {2016/04/10}
+% v1.96
+% - modification of bibatex style information. Since the JACoW template Feb-2016
+% the bibliography requires the IEEEtran style. Heine provided an adapted
+% version using the required values of the template:
+% + ieee biblatex style instead of numeric-compv
+% + doi field is cleared for all entries
+% + et al. is used when there are > 6 authors (maxnames=6). In that case,
+% only the first author is mentioned (minnames=1)
+% + url field is cleared for articles and inproceedings
+% + giveninits=true reduces all given names to initials
+% Heine Dølrath Thomsen, 30 June 2016
+%
+% v2.00
+% - after using v1.96 during conferences where DOIs/URLs were present in biblio-
+% graphic records, the following changes to Heine's version have been made:
+% + doi field allowed
+% + url field allowed
+%
+% v2.1 new options introduced
+% flushend: new: keeplastbox
+% siunitx: new: binary-units=true
+% BibLaTeX: changed: style=ieee => bibstyle=ieee, citestyle=numeric-comp
+% new: dashed=false
+% removed: doi=false
+%
+% v2.2
+% - adapted to the changes of template version 2018-02
+% - made this one official
+% Volker RW Schaa, 23 Feb 2018
+%
+\def\fileversion{2.2}
+\def\filedate{2018/02/23}
+\def\docdate {2018/02/23}
\NeedsTeXFormat{LaTeX2e}
\ProvidesClass{jacow}[\filedate\space Version \fileversion]
@@ -149,9 +179,10 @@
\ExecuteOptions{aca4}
\ProcessOptions
+\RequirePackage{cmap}
\RequirePackage{fix-cm}
\LoadClass[10pt,twocolumn]{article}
-\RequirePackage{flushend}
+\RequirePackage[keeplastbox]{flushend} %% modified
% Tools:
\RequirePackage{etoolbox}
\RequirePackage{ifxetex}
@@ -177,7 +208,7 @@
\noexpand\@skipmath#3#4$\valign$}%
\reserved at a}
-\RequirePackage[detect-mode,detect-weight]{siunitx}
+\RequirePackage[detect-mode,detect-weight, binary-units=true]{siunitx}
\RequirePackage{graphicx}
\RequirePackage{booktabs}
\RequirePackage[figureposition=bottom,tableposition=top,skip=5pt]{caption}
@@ -356,7 +387,10 @@
{\par}
}
\ifboolexpr{bool{jacowbiblatex}}
- {\RequirePackage[style=numeric-comp,sorting=none]{biblatex}
+%2.00 {\RequirePackage[style=ieee,sorting=none,giveninits=true,doi=false,maxnames=6,minnames=1]{biblatex}
+%2.1 {\RequirePackage[style=ieee,sorting=none,giveninits=true,maxnames=6,minnames=1]{biblatex}
+%2.2
+ {\RequirePackage[bibstyle=ieee,citestyle=numeric-comp,dashed=false,sorting=none,giveninits=true,maxnames=6,minnames=1]{biblatex}
\renewbibmacro*{url+urldate}{%
\iffieldundef{url}
{}
@@ -364,6 +398,13 @@
\nopunct}}%
\DeclareFieldFormat{url}{\url{#1}}
\DeclareFieldFormat{eprint}{#1}
+%% when to activate this? Paper format acus/letter
+% \DefineBibliographyExtras{american}{\stdpunctuation} % mod
+ % Drop urls for article and inproceedings entries
+%2.00 \DeclareFieldFormat
+%2.00 [article,inproceedings]
+%2.00 {url}{}
+ %
\setlength\bibitemsep{0pt}
\setlength\bibparsep{0pt}
\setlength\biblabelsep{5pt}
More information about the tex-live-commits
mailing list