texlive[45796] Master: new cm-mf-extra-bold

commits+karl at tug.org commits+karl at tug.org
Tue Nov 14 18:38:42 CET 2017


Revision: 45796
          http://tug.org/svn/texlive?view=revision&revision=45796
Author:   karl
Date:     2017-11-14 18:38:41 +0100 (Tue, 14 Nov 2017)
Log Message:
-----------
new cm-mf-extra-bold

Modified Paths:
--------------
    trunk/Master/tlpkg/bin/tlpkg-ctan-check
    trunk/Master/tlpkg/tlpsrc/biber.tlpsrc
    trunk/Master/tlpkg/tlpsrc/collection-fontsextra.tlpsrc

Added Paths:
-----------
    trunk/Master/texmf-dist/fonts/source/public/cm-mf-extra-bold/
    trunk/Master/texmf-dist/fonts/source/public/cm-mf-extra-bold/cmbcsc10.mf
    trunk/Master/texmf-dist/fonts/source/public/cm-mf-extra-bold/cmbtex10.mf
    trunk/Master/texmf-dist/fonts/source/public/cm-mf-extra-bold/cmbtt10.mf
    trunk/Master/texmf-dist/fonts/source/public/cm-mf-extra-bold/cmbtt8.mf
    trunk/Master/texmf-dist/fonts/source/public/cm-mf-extra-bold/cmbtt9.mf
    trunk/Master/texmf-dist/fonts/source/public/cm-mf-extra-bold/cmexb10.mf
    trunk/Master/texmf-dist/fonts/source/public/cm-mf-extra-bold/cmttb10.mf
    trunk/Master/texmf-dist/fonts/tfm/public/cm-mf-extra-bold/
    trunk/Master/texmf-dist/fonts/tfm/public/cm-mf-extra-bold/cmbcsc10.tfm
    trunk/Master/texmf-dist/fonts/tfm/public/cm-mf-extra-bold/cmbtex10.tfm
    trunk/Master/texmf-dist/fonts/tfm/public/cm-mf-extra-bold/cmbtt10.tfm
    trunk/Master/texmf-dist/fonts/tfm/public/cm-mf-extra-bold/cmbtt8.tfm
    trunk/Master/texmf-dist/fonts/tfm/public/cm-mf-extra-bold/cmbtt9.tfm
    trunk/Master/texmf-dist/fonts/tfm/public/cm-mf-extra-bold/cmttb10.tfm
    trunk/Master/tlpkg/tlpsrc/cm-mf-extra-bold.tlpsrc

Removed Paths:
-------------
    trunk/Master/texmf-dist/fonts/source/public/cm/cmbcsc10.mf
    trunk/Master/texmf-dist/fonts/source/public/cm/cmbtex10.mf
    trunk/Master/texmf-dist/fonts/source/public/cm/cmbtt10.mf
    trunk/Master/texmf-dist/fonts/source/public/cm/cmbtt8.mf
    trunk/Master/texmf-dist/fonts/source/public/cm/cmbtt9.mf
    trunk/Master/texmf-dist/fonts/source/public/cm/cmexb10.mf
    trunk/Master/texmf-dist/fonts/source/public/cm/cmttb10.mf
    trunk/Master/texmf-dist/fonts/tfm/public/cm/cmbcsc10.tfm

Deleted: trunk/Master/texmf-dist/fonts/source/public/cm/cmbcsc10.mf
===================================================================
--- trunk/Master/texmf-dist/fonts/source/public/cm/cmbcsc10.mf	2017-11-14 08:49:25 UTC (rev 45795)
+++ trunk/Master/texmf-dist/fonts/source/public/cm/cmbcsc10.mf	2017-11-14 17:38:41 UTC (rev 45796)
@@ -1,112 +0,0 @@
-% This is CMBCSC10.MF in text format (RUM/KR)
-% This is CMCSC10.MF in text format, as of May 5, 1986.
-% Computer Modern Roman Caps and Small Caps 10 point
-if unknown cmbase: input cmbase fi
- 
-font_identifier:="CMBCSC"; font_size 10pt#;
- 
-% first come parameters used to set the uppercase letters
-% (including some for lowercase that aren't actually used)
-u#:=21/36pt#;                   % unit width
-width_adj#:=0pt#;               % width adjustment for certain characters
-serif_fit#:=0pt#;               % extra sidebar near lowercase serifs
-cap_serif_fit#:=6/36pt#;        % extra sidebar near uppercase serifs
-letter_fit#:=5/36pt#;           % extra space added to all sidebars
- 
-body_height#:=270/36pt#;        % height of tallest characters
-asc_height#:=250/36pt#;         % height of lowercase ascenders
-cap_height#:=246/36pt#;         % height of caps
-fig_height#:=232/36pt#;         % height of numerals
-x_height#:=160/36pt#;           % height of lowercase without ascenders
-math_axis#:=90/36pt#;           % axis of symmetry for math symbols
-bar_height#:=85/36pt#;          % height of crossbar in lowercase e
-comma_depth#:=70/36pt#;         % depth of comma below baseline
-desc_depth#:=70/36pt#;          % depth of lowercase descenders
- 
-crisp#:=0pt#;                   % diameter of serif corners
-tiny#:=13/36pt#;                % diameter of rounded corners
-fine#:=10/36pt#;                % diameter of sharply rounded corners
-thin_join#:=10/36pt#;           % width of extrafine details
-hair#:=17/36pt#;                % lowercase hairline breadth
-stem#:=41/36pt#;                % lowercase stem breadth
-curve#:=46/36pt#;               % lowercase curve breadth
-ess#:=38/36pt#;                 % breadth in middle of lowercase s
-flare#:=45/36pt#;               % diameter of bulbs or breadth of terminals
-dot_size#:=56/36pt#;            % diameter of dots
-cap_hair#:=19/36pt#;            % uppercase hairline breadth
-cap_stem#:=51/36pt#;            % uppercase stem breadth
-cap_curve#:=55/36pt#;           % uppercase curve breadth
-cap_ess#:=53/36pt#;             % breadth in middle of uppercase s
-rule_thickness#:=.6pt#;         % thickness of lines in math symbols
- 
-dish#:=1/36pt#;                 % amount erased at top or bottom of serifs
-bracket#:=10/36pt#;             % vertical distance from serif base to tangent
-jut#:=25/36pt#;                 % protrusion of lowercase serifs
-cap_jut#:=34/36pt#;             % protrusion of uppercase serifs
-beak_jut#:=11/36pt#;            % horizontal protrusion of beak serifs
-beak#:=70/36pt#;                % vertical protrusion of beak serifs
-vair#:=13/36pt#;                % vertical diameter of hairlines
-notch_cut#:=10pt#;              % maximum breadth above or below notches
-bar#:=17/36pt#;                 % lowercase bar thickness
-slab#:=17/36pt#;                % serif and arm thickness
-cap_bar#:=17/36pt#;             % uppercase bar thickness
-cap_band#:=17/36pt#;            % uppercase thickness above/below lobes
-cap_notch_cut#:=10pt#;          % max breadth above/below uppercase notches
-serif_drop#:=3/36pt#;           % vertical drop of sloped serifs
-stem_corr#:=2/36pt#;            % for small refinements of stem breadth
-vair_corr#:=1.5/36pt#;          % for small refinements of hairline height
-apex_corr#:=0pt#;               % extra width at diagonal junctions
- 
-o#:=4/36pt#;                    % amount of overshoot for curves
-apex_o#:=3/36pt#;               % amount of overshoot for diagonal junctions
- 
-slant:=0;                       % tilt ratio $(*Delta x/*Delta y)$
-fudge:=1;                       % factor applied to weights of heavy characters
-math_spread:=0.5;               % extra openness of math symbols
-superness:=8/11;                % parameter for superellipses
-superpull:=1/8;                 % extra openness inside bowls
-beak_darkness:=0.4;             % fraction of triangle inside beak serifs
-ligs:=1;                        % level of ligatures to be included
- 
-square_dots:=false;             % should dots be square?
-hefty:=false;                   % should we try hard not to be overweight?
-serifs:=true;                   % should serifs and bulbs be attached?
-monospace:=false;               % should all characters have the same width?
-variant_g:=false;               % should an italic-style g be used?
-low_asterisk:=false;            % should the asterisk be centered at the axis?
-math_fitting:=false;            % should math-mode spacing be used?
- 
-% now come replacements used to set the lowercase caps
- 
-lower.u#:=16/36pt#;             % unit width
-lower.width_adj#:=0pt#;         % width adjustment for certain characters
-lower.cap_serif_fit#:=5/36pt#;  % extra sidebar near uppercase serifs
-lower.letter_fit#:=2.4/36pt#;   % extra space added to all sidebars
- 
-lower.body_height#:=200/36pt#;  % height of tallest characters
-lower.cap_height#:=185/36pt#;   % height of caps
-lower.x_height#:=120/36pt#;     % height of lowercase without ascenders
-lower.bar_height#:=64/36pt#;    % height of crossbar in lower case e
-lower.comma_depth#:=52/36pt#;   % depth of comma below baseline
- 
-lower.flare#:=34/36pt#;         % diameter of bulbs or breadth of terminals
-lower.cap_hair#:=16.2/36pt#;    % uppercase hairline breadth
-lower.stem#:=34/36pt#;          % lowercase stem breadth
-lower.cap_stem#:=42/36pt#;      % uppercase stem breadth
-lower.cap_curve#:=48/36pt#;     % uppercase curve breadth
-lower.cap_ess#:=47/36pt#;       % breadth in middle of uppercases
- 
-lower.cap_jut#:=24/36pt#;       % protrusion of uppercase serifs
-lower.beak_jut#:=8/36pt#;       % horizontal protrusion of beak serifs
-lower.beak#:=52/36pt#;          % vertical protrusion of beak serifs
-lower.slab#:=14/36pt#;          % serif and arm thickness
-lower.cap_bar#:=14/36pt#;       % uppercase bar thickness
-lower.cap_band#:=14/36pt#;      % uppercase thickness above/below lobes
-lower.cap_notch_cut#:=10pt#;    % max breadth above/below uppercase notches
- 
-lower.o#:=2.5/36pt#;            % amount of overshoot for curves
-lower.apex_o#:=2.5/36pt#;       % amount of overshoot for diagonal junctions
- 
-lower.fudge:=1;                 % factor applied to weights of heavy characters
- 
-generate csc                    % switch to the driver file

Deleted: trunk/Master/texmf-dist/fonts/source/public/cm/cmbtex10.mf
===================================================================
--- trunk/Master/texmf-dist/fonts/source/public/cm/cmbtex10.mf	2017-11-14 08:49:25 UTC (rev 45795)
+++ trunk/Master/texmf-dist/fonts/source/public/cm/cmbtex10.mf	2017-11-14 17:38:41 UTC (rev 45796)
@@ -1,78 +0,0 @@
-% Dies ist CMBTEX10.MF vom 1.5.89 Ar (W. Kaspar; kaspar at uni-muenster.de)
-% Entstanden aus CMTEX10.MF
-% Computer Modern TeX extended ASCII characters for use with 10 point
-if unknown cmbase: input cmbase fi
-
-font_identifier:="CMBTEX"; font_size 10pt#;
-
-u#:=21/36pt#;      % unit width
-width_adj#:=0pt#;    % width adjustment for certain characters
-serif_fit#:=0pt#;    % extra sidebar near lowercase serifs
-cap_serif_fit#:=0pt#;    % extra sidebar near uppercase serifs
-letter_fit#:=0pt#;    % extra space added to all sidebars
-
-body_height#:=250/36pt#;  % height of tallest characters
-asc_height#:=220/36pt#;    % height of lowercase ascenders
-cap_height#:=220/36pt#;    % height of caps
-fig_height#:=220/36pt#;    % height of numerals
-x_height#:=160/36pt#;    % height of lowercase without ascenders
-math_axis#:=110/36pt#;    % axis of symmetry for math symbols
-bar_height#:=77/36pt#;    % height of crossbar in lowercase e
-comma_depth#:=50/36pt#;    % depth of comma below baseline
-desc_depth#:=80/36pt#;    % depth of lowercase descenders
-
-crisp#:=22/36pt#;    % diameter of serif corners
-tiny#:=35/36pt#;    % diameter of rounded corners
-fine#:=32/36pt#;    % diameter of sharply rounded corners
-thin_join#:=34/36pt#;    % width of extrafine details
-hair#:=34/36pt#;    % lowercase hairline breadth
-stem#:=41/36pt#;    % lowercase stem breadth
-curve#:=39/36pt#;    % lowercase curve breadth
-ess#:=32/36pt#;      % breadth in middle of lowercase s
-flare#:=44/36pt#;    % diameter of bulbs or breadth of terminals
-dot_size#:=53/36pt#;    % diameter of dots
-cap_hair#:=42/36pt#;    % uppercase hairline breadth
-cap_stem#:=42/36pt#;    % uppercase stem breadth
-cap_curve#:=42/36pt#;    % uppercase curve breadth
-cap_ess#:=42/36pt#;    % breadth in middle of uppercase s
-rule_thickness#:=42/36pt#;  % thickness of lines in math symbols
-
-dish#:=0pt#;      % amount erased at top or bottom of serifs
-bracket#:=0pt#;      % vertical distance from serif base to tangent
-jut#:=31/36pt#;      % protrusion of lowercase serifs
-cap_jut#:=31/36pt#;    % protrusion of uppercase serifs
-beak_jut#:=0pt#;    % horizontal protrusion of beak serifs
-beak#:=34/36pt#;    % vertical protrusion of beak serifs
-vair#:=35/36pt#;    % vertical diameter of hairlines
-notch_cut#:=25/36pt#;    % maximum breadth above or below notches
-bar#:=34/36pt#;      % lowercase bar thickness
-slab#:=34/36pt#;    % serif and arm thickness
-cap_bar#:=34/36pt#;    % uppercase bar thickness
-cap_band#:=34/36pt#;    % uppercase thickness above/below lobes
-cap_notch_cut#:=25/36pt#;  % max breadth above/below uppercase notches
-serif_drop#:=0pt#;    % vertical drop of sloped serifs
-stem_corr#:=0pt#;    % for small refinements of stem breadth
-vair_corr#:=0pt#;    % for small refinements of hairline height
-apex_corr#:=10/36pt#;    % extra width at diagonal junctions
-
-o#:=2/36pt#;      % amount of overshoot for curves
-apex_o#:=1/36pt#;    % amount of overshoot for diagonal junctions
-
-slant:=.25;      % tilt ratio $(\Delta x/\Delta y)$
-fudge:=0.81;      % factor applied to weights of heavy characters
-math_spread:=-1;    % extra openness of math symbols
-superness:=8/11;    % parameter for superellipses
-superpull:=0;      % extra openness inside bowls
-beak_darkness:=0;    % fraction of triangle inside beak serifs
-ligs:=0;      % level of ligatures to be included
-
-square_dots:=false;    % should dots be square?
-hefty:=true;      % should we try hard not to be overweight?
-serifs:=true;      % should serifs and bulbs be attached?
-monospace:=true;    % should all characters have the same width?
-variant_g:=false;    % should an italic-style g be used?
-low_asterisk:=true;    % should the asterisk be centered at the axis?
-math_fitting:=false;    % should math-mode spacing be used?
-
-generate texset      % switch to the driver file
-

Deleted: trunk/Master/texmf-dist/fonts/source/public/cm/cmbtt10.mf
===================================================================
--- trunk/Master/texmf-dist/fonts/source/public/cm/cmbtt10.mf	2017-11-14 08:49:25 UTC (rev 45795)
+++ trunk/Master/texmf-dist/fonts/source/public/cm/cmbtt10.mf	2017-11-14 17:38:41 UTC (rev 45796)
@@ -1,78 +0,0 @@
-% Dies ist CMBTT10.MF vom 1.5.89 Ar (W. Kaspar; kaspar at uni-muenster.de)
-% Entstanden aus CMTT10.MF
-% Computer Modern Typewriter Text for use with 10 point
-if unknown cmbase: input cmbase fi
-
-font_identifier:="CMTT"; font_size 10pt#;
-
-u#:=21/36pt#;      % unit width
-width_adj#:=0pt#;    % width adjustment for certain characters
-serif_fit#:=0pt#;    % extra sidebar near lowercase serifs
-cap_serif_fit#:=0pt#;    % extra sidebar near uppercase serifs
-letter_fit#:=0pt#;    % extra space added to all sidebars
-
-body_height#:=250/36pt#;  % height of tallest characters
-asc_height#:=220/36pt#;    % height of lowercase ascenders
-cap_height#:=220/36pt#;    % height of caps
-fig_height#:=220/36pt#;    % height of numerals
-x_height#:=160/36pt#;    % height of lowercase without ascenders
-math_axis#:=110/36pt#;    % axis of symmetry for math symbols
-bar_height#:=77/36pt#;    % height of crossbar in lowercase e
-comma_depth#:=50/36pt#;    % depth of comma below baseline
-desc_depth#:=80/36pt#;    % depth of lowercase descenders
-
-crisp#:=22/36pt#;    % diameter of serif corners
-tiny#:=35/36pt#;    % diameter of rounded corners
-fine#:=32/36pt#;    % diameter of sharply rounded corners
-thin_join#:=34/36pt#;    % width of extrafine details
-hair#:=34/36pt#;    % lowercase hairline breadth
-stem#:=41/36pt#;    % lowercase stem breadth
-curve#:=39/36pt#;    % lowercase curve breadth
-ess#:=32/36pt#;      % breadth in middle of lowercase s
-flare#:=44/36pt#;    % diameter of bulbs or breadth of terminals
-dot_size#:=53/36pt#;    % diameter of dots
-cap_hair#:=42/36pt#;    % uppercase hairline breadth
-cap_stem#:=42/36pt#;    % uppercase stem breadth
-cap_curve#:=42/36pt#;    % uppercase curve breadth
-cap_ess#:=42/36pt#;    % breadth in middle of uppercase s
-rule_thickness#:=42/36pt#;  % thickness of lines in math symbols
-
-dish#:=0pt#;      % amount erased at top or bottom of serifs
-bracket#:=0pt#;      % vertical distance from serif base to tangent
-jut#:=31/36pt#;      % protrusion of lowercase serifs
-cap_jut#:=31/36pt#;    % protrusion of uppercase serifs
-beak_jut#:=0pt#;    % horizontal protrusion of beak serifs
-beak#:=34/36pt#;    % vertical protrusion of beak serifs
-vair#:=35/36pt#;    % vertical diameter of hairlines
-notch_cut#:=25/36pt#;    % maximum breadth above or below notches
-bar#:=34/36pt#;      % lowercase bar thickness
-slab#:=34/36pt#;    % serif and arm thickness
-cap_bar#:=34/36pt#;    % uppercase bar thickness
-cap_band#:=34/36pt#;    % uppercase thickness above/below lobes
-cap_notch_cut#:=25/36pt#;  % max breadth above/below uppercase notches
-serif_drop#:=0pt#;    % vertical drop of sloped serifs
-stem_corr#:=0pt#;    % for small refinements of stem breadth
-vair_corr#:=0pt#;    % for small refinements of hairline height
-apex_corr#:=10/36pt#;    % extra width at diagonal junctions
-
-o#:=2/36pt#;      % amount of overshoot for curves
-apex_o#:=1/36pt#;    % amount of overshoot for diagonal junctions
-
-slant:=0;      % tilt ratio $(\Delta x/\Delta y)$
-fudge:=0.81;      % factor applied to weights of heavy characters
-math_spread:=-1;    % extra openness of math symbols
-superness:=8/11;    % parameter for superellipses
-superpull:=0;      % extra openness inside bowls
-beak_darkness:=0;    % fraction of triangle inside beak serifs
-ligs:=0;      % level of ligatures to be included
-
-square_dots:=false;    % should dots be square?
-hefty:=true;      % should we try hard not to be overweight?
-serifs:=true;      % should serifs and bulbs be attached?
-monospace:=true;    % should all characters have the same width?
-variant_g:=false;    % should an italic-style g be used?
-low_asterisk:=true;    % should the asterisk be centered at the axis?
-math_fitting:=false;    % should math-mode spacing be used?
-
-generate roman      % switch to the driver file
-

Deleted: trunk/Master/texmf-dist/fonts/source/public/cm/cmbtt8.mf
===================================================================
--- trunk/Master/texmf-dist/fonts/source/public/cm/cmbtt8.mf	2017-11-14 08:49:25 UTC (rev 45795)
+++ trunk/Master/texmf-dist/fonts/source/public/cm/cmbtt8.mf	2017-11-14 17:38:41 UTC (rev 45796)
@@ -1,78 +0,0 @@
-% Dies ist CMBTT8.MF vom 1.5.89 Ar (W. Kaspar; kaspar at uni-muenster.de)
-% Entstanden aus CMTT8.MF
-% Computer Modern Typewriter Text for use with 8 point
-if unknown cmbase: input cmbase fi
-
-font_identifier:="CMTT"; font_size 8pt#;
-
-u#:=17/36pt#;      % unit width
-width_adj#:=0pt#;    % width adjustment for certain characters
-serif_fit#:=0pt#;    % extra sidebar near lowercase serifs
-cap_serif_fit#:=0pt#;    % extra sidebar near uppercase serifs
-letter_fit#:=0pt#;    % extra space added to all sidebars
-
-body_height#:=200/36pt#;  % height of tallest characters
-asc_height#:=176/36pt#;    % height of lowercase ascenders
-cap_height#:=176/36pt#;    % height of caps
-fig_height#:=176/36pt#;    % height of numerals
-x_height#:=128/36pt#;    % height of lowercase without ascenders
-math_axis#:=88/36pt#;    % axis of symmetry for math symbols
-bar_height#:=61/36pt#;    % height of crossbar in lowercase e
-comma_depth#:=40/36pt#;    % depth of comma below baseline
-desc_depth#:=64/36pt#;    % depth of lowercase descenders
-
-crisp#:=19/36pt#;    % diameter of serif corners
-tiny#:=32/36pt#;    % diameter of rounded corners
-fine#:=29/36pt#;    % diameter of sharply rounded corners
-thin_join#:=31/36pt#;    % width of extrafine details
-hair#:=31/36pt#;    % lowercase hairline breadth
-stem#:=38/36pt#;    % lowercase stem breadth
-curve#:=36/36pt#;    % lowercase curve breadth
-ess#:=29/36pt#;      % breadth in middle of lowercase s
-flare#:=40/36pt#;    % diameter of bulbs or breadth of terminals
-dot_size#:=47/36pt#;    % diameter of dots
-cap_hair#:=39/36pt#;    % uppercase hairline breadth
-cap_stem#:=39/36pt#;    % uppercase stem breadth
-cap_curve#:=39/36pt#;    % uppercase curve breadth
-cap_ess#:=39/36pt#;    % breadth in middle of uppercase s
-rule_thickness#:=39/36pt#;  % thickness of lines in math symbols
-
-dish#:=0pt#;      % amount erased at top or bottom of serifs
-bracket#:=0pt#;      % vertical distance from serif base to tangent
-jut#:=25/36pt#;      % protrusion of lowercase serifs
-cap_jut#:=25/36pt#;    % protrusion of uppercase serifs
-beak_jut#:=0pt#;    % horizontal protrusion of beak serifs
-beak#:=27/36pt#;    % vertical protrusion of beak serifs
-vair#:=31/36pt#;    % vertical diameter of hairlines
-notch_cut#:=22/36pt#;    % maximum breadth above or below notches
-bar#:=30/36pt#;      % lowercase bar thickness
-slab#:=30/36pt#;    % serif and arm thickness
-cap_bar#:=30/36pt#;    % uppercase bar thickness
-cap_band#:=30/36pt#;    % uppercase thickness above/below lobes
-cap_notch_cut#:=22/36pt#;  % max breadth above/below uppercase notches
-serif_drop#:=0pt#;    % vertical drop of sloped serifs
-stem_corr#:=0pt#;    % for small refinements of stem breadth
-vair_corr#:=0pt#;    % for small refinements of hairline height
-apex_corr#:=8/36pt#;    % extra width at diagonal junctions
-
-o#:=1.5/36pt#;      % amount of overshoot for curves
-apex_o#:=1/36pt#;    % amount of overshoot for diagonal junctions
-
-slant:=0;      % tilt ratio $(\Delta x/\Delta y)$
-fudge:=0.81;      % factor applied to weights of heavy characters
-math_spread:=-1;    % extra openness of math symbols
-superness:=8/11;    % parameter for superellipses
-superpull:=0;      % extra openness inside bowls
-beak_darkness:=0;    % fraction of triangle inside beak serifs
-ligs:=0;      % level of ligatures to be included
-
-square_dots:=false;    % should dots be square?
-hefty:=true;      % should we try hard not to be overweight?
-serifs:=true;      % should serifs and bulbs be attached?
-monospace:=true;    % should all characters have the same width?
-variant_g:=false;    % should an italic-style g be used?
-low_asterisk:=true;    % should the asterisk be centered at the axis?
-math_fitting:=false;    % should math-mode spacing be used?
-
-generate roman      % switch to the driver file
-

Deleted: trunk/Master/texmf-dist/fonts/source/public/cm/cmbtt9.mf
===================================================================
--- trunk/Master/texmf-dist/fonts/source/public/cm/cmbtt9.mf	2017-11-14 08:49:25 UTC (rev 45795)
+++ trunk/Master/texmf-dist/fonts/source/public/cm/cmbtt9.mf	2017-11-14 17:38:41 UTC (rev 45796)
@@ -1,78 +0,0 @@
-% Dies ist CMBTT9.MF vom 1.5.89 Ar (W. Kaspar; kaspar at uni-muenster.de)
-% Entstanden aus CMTT9.MF
-% Computer Modern Typewriter Text for use with 9 point
-if unknown cmbase: input cmbase fi
-
-font_identifier:="CMTT"; font_size 9pt#;
-
-u#:=18.9/36pt#;      % unit width
-width_adj#:=0pt#;    % width adjustment for certain characters
-serif_fit#:=0pt#;    % extra sidebar near lowercase serifs
-cap_serif_fit#:=0pt#;    % extra sidebar near uppercase serifs
-letter_fit#:=0pt#;    % extra space added to all sidebars
-
-body_height#:=225/36pt#;  % height of tallest characters
-asc_height#:=198/36pt#;    % height of lowercase ascenders
-cap_height#:=198/36pt#;    % height of caps
-fig_height#:=198/36pt#;    % height of numerals
-x_height#:=142/36pt#;    % height of lowercase without ascenders
-math_axis#:=99/36pt#;    % axis of symmetry for math symbols
-bar_height#:=69/36pt#;    % height of crossbar in lowercase e
-comma_depth#:=45/36pt#;    % depth of comma below baseline
-desc_depth#:=72/36pt#;    % depth of lowercase descenders
-
-crisp#:=21/36pt#;    % diameter of serif corners
-tiny#:=34/36pt#;    % diameter of rounded corners
-fine#:=31/36pt#;    % diameter of sharply rounded corners
-thin_join#:=33/36pt#;    % width of extrafine details
-hair#:=33/36pt#;    % lowercase hairline breadth
-stem#:=40/36pt#;    % lowercase stem breadth
-curve#:=38/36pt#;    % lowercase curve breadth
-ess#:=31/36pt#;      % breadth in middle of lowercase s
-flare#:=41/36pt#;    % diameter of bulbs or breadth of terminals
-dot_size#:=48/36pt#;    % diameter of dots
-cap_hair#:=41/36pt#;    % uppercase hairline breadth
-cap_stem#:=41/36pt#;    % uppercase stem breadth
-cap_curve#:=41/36pt#;    % uppercase curve breadth
-cap_ess#:=41/36pt#;    % breadth in middle of uppercase s
-rule_thickness#:=41/36pt#;  % thickness of lines in math symbols
-
-dish#:=0pt#;      % amount erased at top or bottom of serifs
-bracket#:=0pt#;      % vertical distance from serif base to tangent
-jut#:=28/36pt#;      % protrusion of lowercase serifs
-cap_jut#:=28/36pt#;    % protrusion of uppercase serifs
-beak_jut#:=0pt#;    % horizontal protrusion of beak serifs
-beak#:=31/36pt#;    % vertical protrusion of beak serifs
-vair#:=32/36pt#;    % vertical diameter of hairlines
-notch_cut#:=24/36pt#;    % maximum breadth above or below notches
-bar#:=33/36pt#;      % lowercase bar thickness
-slab#:=33/36pt#;    % serif and arm thickness
-cap_bar#:=33/36pt#;    % uppercase bar thickness
-cap_band#:=33/36pt#;    % uppercase thickness above/below lobes
-cap_notch_cut#:=24/36pt#;  % max breadth above/below uppercase notches
-serif_drop#:=0pt#;    % vertical drop of sloped serifs
-stem_corr#:=0pt#;    % for small refinements of stem breadth
-vair_corr#:=0pt#;    % for small refinements of hairline height
-apex_corr#:=9/36pt#;    % extra width at diagonal junctions
-
-o#:=1.8/36pt#;      % amount of overshoot for curves
-apex_o#:=1/36pt#;    % amount of overshoot for diagonal junctions
-
-slant:=0;      % tilt ratio $(\Delta x/\Delta y)$
-fudge:=0.81;      % factor applied to weights of heavy characters
-math_spread:=-1;    % extra openness of math symbols
-superness:=8/11;    % parameter for superellipses
-superpull:=0;      % extra openness inside bowls
-beak_darkness:=0;    % fraction of triangle inside beak serifs
-ligs:=0;      % level of ligatures to be included
-
-square_dots:=false;    % should dots be square?
-hefty:=true;      % should we try hard not to be overweight?
-serifs:=true;      % should serifs and bulbs be attached?
-monospace:=true;    % should all characters have the same width?
-variant_g:=false;    % should an italic-style g be used?
-low_asterisk:=true;    % should the asterisk be centered at the axis?
-math_fitting:=false;    % should math-mode spacing be used?
-
-generate roman      % switch to the driver file
-

Deleted: trunk/Master/texmf-dist/fonts/source/public/cm/cmexb10.mf
===================================================================
--- trunk/Master/texmf-dist/fonts/source/public/cm/cmexb10.mf	2017-11-14 08:49:25 UTC (rev 45795)
+++ trunk/Master/texmf-dist/fonts/source/public/cm/cmexb10.mf	2017-11-14 17:38:41 UTC (rev 45796)
@@ -1,85 +0,0 @@
-% Computer Modern Math Extension Bold 10 point
-% Modification of cmex10 by Sami Sozuer. August 10 1994. 
-if unknown cmbase: input cmbase fi
-
-font_identifier:="CMEXB"; font_size 10pt#;
-
-u#:=20/36pt#;      % unit width, must be the same as cmex10 (circle stuff)
-width_adj#:=0pt#;    % width adjustment for certain characters
-serif_fit#:=0pt#;    % extra sidebar near lowercase serifs
-cap_serif_fit#:=5/36pt#;  % extra sidebar near uppercase serifs
-letter_fit#:=0pt#;    % extra space added to all sidebars
-
-body_height#:=270/36pt#;  % height of tallest characters
-asc_height#:=250/36pt#;    % height of lowercase ascenders
-cap_height#:=246/36pt#;    % height of caps
-fig_height#:=232/36pt#;    % height of numerals
-x_height#:=155/36pt#;    % height of lowercase without ascenders
-math_axis#:=90/36pt#;    % axis of symmetry for math symbols
-bar_height#:=87/36pt#;    % height of crossbar in lowercase e
-comma_depth#:=70/36pt#;    % depth of comma below baseline
-desc_depth#:=70/36pt#;    % depth of lowercase descenders
-
-crisp#:=0pt#;      % diameter of serif corners
-tiny#:=8/36pt#;      % diameter of rounded corners
-fine#:=7/36pt#;      % diameter of sharply rounded corners
-thin_join#:=9.5/36pt#;    % width of extrafine details
-hair#:=13.5/36pt#;      % lowercase hairline breadth
-stem#:=37/36pt#;    % lowercase stem breadth
-curve#:=42/36pt#;    % lowercase curve breadth
-ess#:=40/36pt#;      % breadth in middle of lowercase s
-flare#:=46/36pt#;    % diameter of bulbs or breadth of terminals
-dot_size#:=48/36pt#;    % diameter of dots
-cap_hair#:=16/36pt#;    % uppercase hairline breadth
-cap_stem#:=47/36pt#;    % uppercase stem breadth
-cap_curve#:=50/36pt#;    % uppercase curve breadth
-cap_ess#:=47/36pt#;    % breadth in middle of uppercase s
-rule_thickness#:=.58pt#;    % thickness of lines in math symbols
-
-dish#:=1/36pt#;      % amount erased at top or bottom of serifs
-bracket#:=20/36pt#;    % vertical distance from serif base to tangent
-jut#:=28/36pt#;      % protrusion of lowercase serifs
-cap_jut#:=37/36pt#;    % protrusion of uppercase serifs
-beak_jut#:=10/36pt#;    % horizontal protrusion of beak serifs
-beak#:=70/36pt#;    % vertical protrusion of beak serifs
-vair#:=10.5/36pt#;      % vertical diameter of hairlines
-notch_cut#:=15pt#;    % maximum breadth above or below notches
-bar#:=16/36pt#;      % lowercase bar thickness
-slab#:=16/36pt#;    % serif and arm thickness
-cap_bar#:=16/36pt#;    % uppercase bar thickness
-cap_band#:=16/36pt#;    % uppercase thickness above/below lobes
-cap_notch_cut#:=16pt#;    % max breadth above/below uppercase notches
-serif_drop#:=4/36pt#;    % vertical drop of sloped serifs
-stem_corr#:=1/36pt#;    % for small refinements of stem breadth
-vair_corr#:=1/36pt#;    % for small refinements of hairline height
-apex_corr#:=0pt#;    % extra width at diagonal junctions
-
-o#:=8/36pt#;      % amount of overshoot for curves
-apex_o#:=8/36pt#;    % amount of overshoot for diagonal junctions
-
-slant:=0;      % tilt ratio $(\Delta x/\Delta y)$
-fudge:=1;      % factor applied to weights of heavy characters
-math_spread:=0;      % extra openness of math symbols
-superness:=1/sqrt2;    % parameter for superellipses
-superpull:=1/6;      % extra openness inside bowls
-beak_darkness:=11/30;    % fraction of triangle inside beak serifs
-ligs:=2;      % level of ligatures to be included
-
-square_dots:=false;    % should dots be square?
-hefty:=false;      % should we try hard not to be overweight?
-serifs:=true;      % should serifs and bulbs be attached?
-monospace:=false;    % should all characters have the same width?
-variant_g:=false;    % should an italic-style g be used?
-low_asterisk:=false;    % should the asterisk be centered at the axis?
-math_fitting:=false;    % should math-mode spacing be used?
-
-% the following font parameters are explained in {\sl The \TeX book}, Appendix G
-fontdimen 8:  % parameters $\xi_8$ through $\xi_{13}$ will now be listed
- rule_thickness#,  % default\_rule\_thickness
- 40/36pt#,    % big\_op\_spacing1
- 60/36pt#,    % big\_op\_spacing2
- 72/36pt#,    % big\_op\_spacing3
- 216/36pt#,    % big\_op\_spacing4
- 36/36pt#;    % big\_op\_spacing5
-
-generate mathex      % switch to the driver file

Deleted: trunk/Master/texmf-dist/fonts/source/public/cm/cmttb10.mf
===================================================================
--- trunk/Master/texmf-dist/fonts/source/public/cm/cmttb10.mf	2017-11-14 08:49:25 UTC (rev 45795)
+++ trunk/Master/texmf-dist/fonts/source/public/cm/cmttb10.mf	2017-11-14 17:38:41 UTC (rev 45796)
@@ -1,77 +0,0 @@
-% Computer Modern Typewriter Text Bold for use with 10 point
-% Adopted from cmtt10 with ascender heights comparable to cmr10.
-if unknown cmbase: input cmbase fi
-
-font_identifier:="XXBTT"; font_size 10pt#;
-
-u#:=22/36pt#;      % unit width (extend slightly)
-width_adj#:=0pt#;    % width adjustment for certain characters
-serif_fit#:=0pt#;    % extra sidebar near lowercase serifs
-cap_serif_fit#:=0pt#;    % extra sidebar near uppercase serifs
-letter_fit#:=0pt#;    % extra space added to all sidebars
-
-body_height#:=250/36pt#;  % height of tallest characters
-asc_height#:=220/36pt#;    % height of lowercase ascenders
-cap_height#:=220/36pt#;    % height of caps
-fig_height#:=220/36pt#;    % height of numerals
-x_height#:=160/36pt#;    % height of lowercase without ascenders
-math_axis#:=110/36pt#;    % axis of symmetry for math symbols
-bar_height#:=77/36pt#;    % height of crossbar in lowercase e
-comma_depth#:=50/36pt#;    % depth of comma below baseline
-desc_depth#:=80/36pt#;    % depth of lowercase descenders
-
-crisp#:=22/36pt#;    % diameter of serif corners
-tiny#:=22/36pt#;    % diameter of rounded corners
-fine#:=21/36pt#;    % diameter of sharply rounded corners
-thin_join#:=29/36pt#;    % width of extrafine details
-hair#:=34/36pt#;    % lowercase hairline breadth
-stem#:=34/36pt#;    % lowercase stem breadth
-curve#:=34/36pt#;    % lowercase curve breadth
-ess#:=30/36pt#;      % breadth in middle of lowercase s
-flare#:=35/36pt#;    % diameter of bulbs or breadth of terminals
-dot_size#:=49/36pt#;    % diameter of dots
-cap_hair#:=34/36pt#;    % uppercase hairline breadth
-cap_stem#:=34/36pt#;    % uppercase stem breadth
-cap_curve#:=34/36pt#;    % uppercase curve breadth
-cap_ess#:=34/36pt#;    % breadth in middle of uppercase s
-rule_thickness#:=34/36pt#;  % thickness of lines in math symbols
-
-dish#:=0pt#;      % amount erased at top or bottom of serifs
-bracket#:=0pt#;      % vertical distance from serif base to tangent
-jut#:=32/36pt#;      % protrusion of lowercase serifs
-cap_jut#:=32/36pt#;    % protrusion of uppercase serifs
-beak_jut#:=0pt#;    % horizontal protrusion of beak serifs
-beak#:=34/36pt#;    % vertical protrusion of beak serifs
-vair#:=30/36pt#;    % vertical diameter of hairlines
-notch_cut#:=40/36pt#;    % maximum breadth above or below notches
-bar#:=30/36pt#;      % lowercase bar thickness
-slab#:=30/36pt#;    % serif and arm thickness
-cap_bar#:=30/36pt#;    % uppercase bar thickness
-cap_band#:=30/36pt#;    % uppercase thickness above/below lobes
-cap_notch_cut#:=55/36pt#;  % max breadth above/below uppercase notches
-serif_drop#:=0pt#;    % vertical drop of sloped serifs
-stem_corr#:=0pt#;    % for small refinements of stem breadth
-vair_corr#:=0pt#;    % for small refinements of hairline height
-apex_corr#:=11/36pt#;    % extra width at diagonal junctions
-
-o#:=3/36pt#;      % amount of overshoot for curves
-apex_o#:=2/36pt#;    % amount of overshoot for diagonal junctions
-
-slant:=0;      % tilt ratio $(\Delta x/\Delta y)$
-fudge:=0.81;      % factor applied to weights of heavy characters
-math_spread:=-1;    % extra openness of math symbols
-superness:=8/11;    % parameter for superellipses
-superpull:=0;      % extra openness inside bowls
-beak_darkness:=0;    % fraction of triangle inside beak serifs
-ligs:=0;      % level of ligatures to be included
-
-square_dots:=false;    % should dots be square?
-hefty:=true;      % should we try hard not to be overweight?
-serifs:=true;      % should serifs and bulbs be attached?
-monospace:=true;    % should all characters have the same width?
-variant_g:=false;    % should an italic-style g be used?
-low_asterisk:=true;    % should the asterisk be centered at the axis?
-math_fitting:=false;    % should math-mode spacing be used?
-
-generate roman      % switch to the driver file
-

Added: trunk/Master/texmf-dist/fonts/source/public/cm-mf-extra-bold/cmbcsc10.mf
===================================================================
--- trunk/Master/texmf-dist/fonts/source/public/cm-mf-extra-bold/cmbcsc10.mf	                        (rev 0)
+++ trunk/Master/texmf-dist/fonts/source/public/cm-mf-extra-bold/cmbcsc10.mf	2017-11-14 17:38:41 UTC (rev 45796)
@@ -0,0 +1,113 @@
+% This is CMBCSC10.MF in text format (W. Kaspar; kaspar at uni-muenster.de)
+% Entstanden aus CMCSC10.MF.
+% Public domain (license statement update only: 2017-11-07).
+% Computer Modern Roman Caps and Small Caps 10 point, bold
+if unknown cmbase: input cmbase fi
+
+font_identifier:="CMBCSC"; font_size 10pt#;
+
+% first come parameters used to set the uppercase letters
+% (including some for lowercase that aren't actually used)
+u#:=21/36pt#;      % unit width
+width_adj#:=0pt#;    % width adjustment for certain characters
+serif_fit#:=0pt#;    % extra sidebar near lowercase serifs
+cap_serif_fit#:=6/36pt#;  % extra sidebar near uppercase serifs
+letter_fit#:=5/36pt#;    % extra space added to all sidebars
+
+body_height#:=270/36pt#;  % height of tallest characters
+asc_height#:=250/36pt#;    % height of lowercase ascenders
+cap_height#:=246/36pt#;    % height of caps
+fig_height#:=232/36pt#;    % height of numerals
+x_height#:=160/36pt#;    % height of lowercase without ascenders
+math_axis#:=90/36pt#;    % axis of symmetry for math symbols
+bar_height#:=85/36pt#;    % height of crossbar in lowercase e
+comma_depth#:=70/36pt#;    % depth of comma below baseline
+desc_depth#:=70/36pt#;    % depth of lowercase descenders
+
+crisp#:=0pt#;      % diameter of serif corners
+tiny#:=13/36pt#;      % diameter of rounded corners
+fine#:=10/36pt#;      % diameter of sharply rounded corners
+thin_join#:=10/36pt#;    % width of extrafine details
+hair#:=17/36pt#;      % lowercase hairline breadth
+stem#:=41/36pt#;    % lowercase stem breadth
+curve#:=46/36pt#;    % lowercase curve breadth
+ess#:=38/36pt#;      % breadth in middle of lowercase s
+flare#:=45/36pt#;    % diameter of bulbs or breadth of terminals
+dot_size#:=56/36pt#;    % diameter of dots
+cap_hair#:=19/36pt#;    % uppercase hairline breadth
+cap_stem#:=51/36pt#;    % uppercase stem breadth
+cap_curve#:=55/36pt#;    % uppercase curve breadth
+cap_ess#:=53/36pt#;    % breadth in middle of uppercase s
+rule_thickness#:=.6pt#;    % thickness of lines in math symbols
+
+dish#:=1/36pt#;      % amount erased at top or bottom of serifs
+bracket#:=10/36pt#;    % vertical distance from serif base to tangent
+jut#:=25/36pt#;      % protrusion of lowercase serifs
+cap_jut#:=34/36pt#;    % protrusion of uppercase serifs
+beak_jut#:=11/36pt#;    % horizontal protrusion of beak serifs
+beak#:=70/36pt#;    % vertical protrusion of beak serifs
+vair#:=13/36pt#;      % vertical diameter of hairlines
+notch_cut#:=10pt#;    % maximum breadth above or below notches
+bar#:=17/36pt#;      % lowercase bar thickness
+slab#:=17/36pt#;    % serif and arm thickness
+cap_bar#:=17/36pt#;    % uppercase bar thickness
+cap_band#:=17/36pt#;    % uppercase thickness above/below lobes
+cap_notch_cut#:=10pt#;    % max breadth above/below uppercase notches
+serif_drop#:=3/36pt#;    % vertical drop of sloped serifs
+stem_corr#:=2/36pt#;    % for small refinements of stem breadth
+vair_corr#:=1.5/36pt#;    % for small refinements of hairline height
+apex_corr#:=0pt#;    % extra width at diagonal junctions
+
+o#:=4/36pt#;      % amount of overshoot for curves
+apex_o#:=3/36pt#;    % amount of overshoot for diagonal junctions
+
+slant:=0;      % tilt ratio $(^Delta x/^Delta y)$
+fudge:=1;      % factor applied to weights of heavy characters
+math_spread:=0.5;      % extra openness of math symbols
+superness:=8/11;    % parameter for superellipses
+superpull:=1/8;      % extra openness inside bowls
+beak_darkness:=0.4;    % fraction of triangle inside beak serifs
+ligs:=1;      % level of ligatures to be included
+
+square_dots:=false;    % should dots be square?
+hefty:=false;      % should we try hard not to be overweight?
+serifs:=true;      % should serifs and bulbs be attached?
+monospace:=false;    % should all characters have the same width?
+variant_g:=false;    % should an italic-style g be used?
+low_asterisk:=false;    % should the asterisk be centered at the axis?
+math_fitting:=false;    % should math-mode spacing be used?
+
+% now come replacements used to set the lowercase caps
+
+lower.u#:=16/36pt#;    % unit width
+lower.width_adj#:=0pt#;    % width adjustment for certain characters
+lower.cap_serif_fit#:=5/36pt#;  % extra sidebar near uppercase serifs
+lower.letter_fit#:=2.4/36pt#;  % extra space added to all sidebars
+
+lower.body_height#:=200/36pt#;  % height of tallest characters
+lower.cap_height#:=185/36pt#;  % height of caps
+lower.x_height#:=120/36pt#;  % height of lowercase without ascenders
+lower.bar_height#:=64/36pt#;  % height of crossbar in lowercase e
+lower.comma_depth#:=52/36pt#;  % depth of comma below baseline
+
+lower.flare#:=34/36pt#;    % diameter of bulbs or breadth of terminals
+lower.cap_hair#:=16.2/36pt#;  % uppercase hairline breadth
+lower.stem#:=34/36pt#;    % lowercase stem breadth
+lower.cap_stem#:=42/36pt#;  % uppercase stem breadth
+lower.cap_curve#:=48/36pt#;  % uppercase curve breadth
+lower.cap_ess#:=47/36pt#;  % breadth in middle of uppercase s
+
+lower.cap_jut#:=24/36pt#;  % protrusion of uppercase serifs
+lower.beak_jut#:=8/36pt#;  % horizontal protrusion of beak serifs
+lower.beak#:=52/36pt#;    % vertical protrusion of beak serifs
+lower.slab#:=14/36pt#;    % serif and arm thickness
+lower.cap_bar#:=14/36pt#;  % uppercase bar thickness
+lower.cap_band#:=14/36pt#;  % uppercase thickness above/below lobes
+lower.cap_notch_cut#:=10pt#;  % max breadth above/below uppercase notches
+
+lower.o#:=2.5/36pt#;    % amount of overshoot for curves
+lower.apex_o#:=2.5/36pt#;    % amount of overshoot for diagonal junctions
+
+lower.fudge:=1;      % factor applied to weights of heavy characters
+
+generate csc      % switch to the driver file


Property changes on: trunk/Master/texmf-dist/fonts/source/public/cm-mf-extra-bold/cmbcsc10.mf
___________________________________________________________________
Added: svn:eol-style
## -0,0 +1 ##
+native
\ No newline at end of property
Added: trunk/Master/texmf-dist/fonts/source/public/cm-mf-extra-bold/cmbtex10.mf
===================================================================
--- trunk/Master/texmf-dist/fonts/source/public/cm-mf-extra-bold/cmbtex10.mf	                        (rev 0)
+++ trunk/Master/texmf-dist/fonts/source/public/cm-mf-extra-bold/cmbtex10.mf	2017-11-14 17:38:41 UTC (rev 45796)
@@ -0,0 +1,78 @@
+% Dies ist CMBTEX10.MF vom 1.5.89 Ar (W. Kaspar; kaspar at uni-muenster.de)
+% Entstanden aus CMTEX10.MF.
+% Public domain (license statement update only: 2017-11-07).
+% Computer Modern TeX extended ASCII characters for use with 10 point, bold
+if unknown cmbase: input cmbase fi
+
+font_identifier:="CMBTEX"; font_size 10pt#;
+
+u#:=21/36pt#;      % unit width
+width_adj#:=0pt#;    % width adjustment for certain characters
+serif_fit#:=0pt#;    % extra sidebar near lowercase serifs
+cap_serif_fit#:=0pt#;    % extra sidebar near uppercase serifs
+letter_fit#:=0pt#;    % extra space added to all sidebars
+
+body_height#:=250/36pt#;  % height of tallest characters
+asc_height#:=220/36pt#;    % height of lowercase ascenders
+cap_height#:=220/36pt#;    % height of caps
+fig_height#:=220/36pt#;    % height of numerals
+x_height#:=160/36pt#;    % height of lowercase without ascenders
+math_axis#:=110/36pt#;    % axis of symmetry for math symbols
+bar_height#:=77/36pt#;    % height of crossbar in lowercase e
+comma_depth#:=50/36pt#;    % depth of comma below baseline
+desc_depth#:=80/36pt#;    % depth of lowercase descenders
+
+crisp#:=22/36pt#;    % diameter of serif corners
+tiny#:=35/36pt#;    % diameter of rounded corners
+fine#:=32/36pt#;    % diameter of sharply rounded corners
+thin_join#:=34/36pt#;    % width of extrafine details
+hair#:=34/36pt#;    % lowercase hairline breadth
+stem#:=41/36pt#;    % lowercase stem breadth
+curve#:=39/36pt#;    % lowercase curve breadth
+ess#:=32/36pt#;      % breadth in middle of lowercase s
+flare#:=44/36pt#;    % diameter of bulbs or breadth of terminals
+dot_size#:=53/36pt#;    % diameter of dots
+cap_hair#:=42/36pt#;    % uppercase hairline breadth
+cap_stem#:=42/36pt#;    % uppercase stem breadth
+cap_curve#:=42/36pt#;    % uppercase curve breadth
+cap_ess#:=42/36pt#;    % breadth in middle of uppercase s
+rule_thickness#:=42/36pt#;  % thickness of lines in math symbols
+
+dish#:=0pt#;      % amount erased at top or bottom of serifs
+bracket#:=0pt#;      % vertical distance from serif base to tangent
+jut#:=31/36pt#;      % protrusion of lowercase serifs
+cap_jut#:=31/36pt#;    % protrusion of uppercase serifs
+beak_jut#:=0pt#;    % horizontal protrusion of beak serifs
+beak#:=34/36pt#;    % vertical protrusion of beak serifs
+vair#:=35/36pt#;    % vertical diameter of hairlines
+notch_cut#:=25/36pt#;    % maximum breadth above or below notches
+bar#:=34/36pt#;      % lowercase bar thickness
+slab#:=34/36pt#;    % serif and arm thickness
+cap_bar#:=34/36pt#;    % uppercase bar thickness
+cap_band#:=34/36pt#;    % uppercase thickness above/below lobes
+cap_notch_cut#:=25/36pt#;  % max breadth above/below uppercase notches
+serif_drop#:=0pt#;    % vertical drop of sloped serifs
+stem_corr#:=0pt#;    % for small refinements of stem breadth
+vair_corr#:=0pt#;    % for small refinements of hairline height
+apex_corr#:=10/36pt#;    % extra width at diagonal junctions
+
+o#:=2/36pt#;      % amount of overshoot for curves
+apex_o#:=1/36pt#;    % amount of overshoot for diagonal junctions
+
+slant:=.25;      % tilt ratio $(\Delta x/\Delta y)$
+fudge:=0.81;      % factor applied to weights of heavy characters
+math_spread:=-1;    % extra openness of math symbols
+superness:=8/11;    % parameter for superellipses
+superpull:=0;      % extra openness inside bowls
+beak_darkness:=0;    % fraction of triangle inside beak serifs
+ligs:=0;      % level of ligatures to be included
+
+square_dots:=false;    % should dots be square?
+hefty:=true;      % should we try hard not to be overweight?
+serifs:=true;      % should serifs and bulbs be attached?
+monospace:=true;    % should all characters have the same width?
+variant_g:=false;    % should an italic-style g be used?
+low_asterisk:=true;    % should the asterisk be centered at the axis?
+math_fitting:=false;    % should math-mode spacing be used?
+
+generate texset      % switch to the driver file


Property changes on: trunk/Master/texmf-dist/fonts/source/public/cm-mf-extra-bold/cmbtex10.mf
___________________________________________________________________
Added: svn:eol-style
## -0,0 +1 ##
+native
\ No newline at end of property
Added: trunk/Master/texmf-dist/fonts/source/public/cm-mf-extra-bold/cmbtt10.mf
===================================================================
--- trunk/Master/texmf-dist/fonts/source/public/cm-mf-extra-bold/cmbtt10.mf	                        (rev 0)
+++ trunk/Master/texmf-dist/fonts/source/public/cm-mf-extra-bold/cmbtt10.mf	2017-11-14 17:38:41 UTC (rev 45796)
@@ -0,0 +1,78 @@
+% Dies ist CMBTT10.MF vom 1.5.89 Ar (W. Kaspar; kaspar at uni-muenster.de)
+% Entstanden aus CMTT10.MF.
+% Public domain (license statement update only: 2017-11-07).
+% Computer Modern Typewriter Text for use with 10 point, bold
+if unknown cmbase: input cmbase fi
+
+font_identifier:="CMTT"; font_size 10pt#;
+
+u#:=21/36pt#;      % unit width
+width_adj#:=0pt#;    % width adjustment for certain characters
+serif_fit#:=0pt#;    % extra sidebar near lowercase serifs
+cap_serif_fit#:=0pt#;    % extra sidebar near uppercase serifs
+letter_fit#:=0pt#;    % extra space added to all sidebars
+
+body_height#:=250/36pt#;  % height of tallest characters
+asc_height#:=220/36pt#;    % height of lowercase ascenders
+cap_height#:=220/36pt#;    % height of caps
+fig_height#:=220/36pt#;    % height of numerals
+x_height#:=160/36pt#;    % height of lowercase without ascenders
+math_axis#:=110/36pt#;    % axis of symmetry for math symbols
+bar_height#:=77/36pt#;    % height of crossbar in lowercase e
+comma_depth#:=50/36pt#;    % depth of comma below baseline
+desc_depth#:=80/36pt#;    % depth of lowercase descenders
+
+crisp#:=22/36pt#;    % diameter of serif corners
+tiny#:=35/36pt#;    % diameter of rounded corners
+fine#:=32/36pt#;    % diameter of sharply rounded corners
+thin_join#:=34/36pt#;    % width of extrafine details
+hair#:=34/36pt#;    % lowercase hairline breadth
+stem#:=41/36pt#;    % lowercase stem breadth
+curve#:=39/36pt#;    % lowercase curve breadth
+ess#:=32/36pt#;      % breadth in middle of lowercase s
+flare#:=44/36pt#;    % diameter of bulbs or breadth of terminals
+dot_size#:=53/36pt#;    % diameter of dots
+cap_hair#:=42/36pt#;    % uppercase hairline breadth
+cap_stem#:=42/36pt#;    % uppercase stem breadth
+cap_curve#:=42/36pt#;    % uppercase curve breadth
+cap_ess#:=42/36pt#;    % breadth in middle of uppercase s
+rule_thickness#:=42/36pt#;  % thickness of lines in math symbols
+
+dish#:=0pt#;      % amount erased at top or bottom of serifs
+bracket#:=0pt#;      % vertical distance from serif base to tangent
+jut#:=31/36pt#;      % protrusion of lowercase serifs
+cap_jut#:=31/36pt#;    % protrusion of uppercase serifs
+beak_jut#:=0pt#;    % horizontal protrusion of beak serifs
+beak#:=34/36pt#;    % vertical protrusion of beak serifs
+vair#:=35/36pt#;    % vertical diameter of hairlines
+notch_cut#:=25/36pt#;    % maximum breadth above or below notches
+bar#:=34/36pt#;      % lowercase bar thickness
+slab#:=34/36pt#;    % serif and arm thickness
+cap_bar#:=34/36pt#;    % uppercase bar thickness
+cap_band#:=34/36pt#;    % uppercase thickness above/below lobes
+cap_notch_cut#:=25/36pt#;  % max breadth above/below uppercase notches
+serif_drop#:=0pt#;    % vertical drop of sloped serifs
+stem_corr#:=0pt#;    % for small refinements of stem breadth
+vair_corr#:=0pt#;    % for small refinements of hairline height
+apex_corr#:=10/36pt#;    % extra width at diagonal junctions
+
+o#:=2/36pt#;      % amount of overshoot for curves
+apex_o#:=1/36pt#;    % amount of overshoot for diagonal junctions
+
+slant:=0;      % tilt ratio $(\Delta x/\Delta y)$
+fudge:=0.81;      % factor applied to weights of heavy characters
+math_spread:=-1;    % extra openness of math symbols
+superness:=8/11;    % parameter for superellipses
+superpull:=0;      % extra openness inside bowls
+beak_darkness:=0;    % fraction of triangle inside beak serifs
+ligs:=0;      % level of ligatures to be included
+
+square_dots:=false;    % should dots be square?
+hefty:=true;      % should we try hard not to be overweight?
+serifs:=true;      % should serifs and bulbs be attached?
+monospace:=true;    % should all characters have the same width?
+variant_g:=false;    % should an italic-style g be used?
+low_asterisk:=true;    % should the asterisk be centered at the axis?
+math_fitting:=false;    % should math-mode spacing be used?
+
+generate roman      % switch to the driver file


Property changes on: trunk/Master/texmf-dist/fonts/source/public/cm-mf-extra-bold/cmbtt10.mf
___________________________________________________________________
Added: svn:eol-style
## -0,0 +1 ##
+native
\ No newline at end of property
Added: trunk/Master/texmf-dist/fonts/source/public/cm-mf-extra-bold/cmbtt8.mf
===================================================================
--- trunk/Master/texmf-dist/fonts/source/public/cm-mf-extra-bold/cmbtt8.mf	                        (rev 0)
+++ trunk/Master/texmf-dist/fonts/source/public/cm-mf-extra-bold/cmbtt8.mf	2017-11-14 17:38:41 UTC (rev 45796)
@@ -0,0 +1,78 @@
+% Dies ist CMBTT8.MF vom 1.5.89 Ar (W. Kaspar; kaspar at uni-muenster.de)
+% Entstanden aus CMTT8.MF.
+% Public domain (license statement update only: 2017-11-07).
+% Computer Modern Typewriter Text for use with 8 point, bold
+if unknown cmbase: input cmbase fi
+
+font_identifier:="CMTT"; font_size 8pt#;
+
+u#:=17/36pt#;      % unit width
+width_adj#:=0pt#;    % width adjustment for certain characters
+serif_fit#:=0pt#;    % extra sidebar near lowercase serifs
+cap_serif_fit#:=0pt#;    % extra sidebar near uppercase serifs
+letter_fit#:=0pt#;    % extra space added to all sidebars
+
+body_height#:=200/36pt#;  % height of tallest characters
+asc_height#:=176/36pt#;    % height of lowercase ascenders
+cap_height#:=176/36pt#;    % height of caps
+fig_height#:=176/36pt#;    % height of numerals
+x_height#:=128/36pt#;    % height of lowercase without ascenders
+math_axis#:=88/36pt#;    % axis of symmetry for math symbols
+bar_height#:=61/36pt#;    % height of crossbar in lowercase e
+comma_depth#:=40/36pt#;    % depth of comma below baseline
+desc_depth#:=64/36pt#;    % depth of lowercase descenders
+
+crisp#:=19/36pt#;    % diameter of serif corners
+tiny#:=32/36pt#;    % diameter of rounded corners
+fine#:=29/36pt#;    % diameter of sharply rounded corners
+thin_join#:=31/36pt#;    % width of extrafine details
+hair#:=31/36pt#;    % lowercase hairline breadth
+stem#:=38/36pt#;    % lowercase stem breadth
+curve#:=36/36pt#;    % lowercase curve breadth
+ess#:=29/36pt#;      % breadth in middle of lowercase s
+flare#:=40/36pt#;    % diameter of bulbs or breadth of terminals
+dot_size#:=47/36pt#;    % diameter of dots
+cap_hair#:=39/36pt#;    % uppercase hairline breadth
+cap_stem#:=39/36pt#;    % uppercase stem breadth
+cap_curve#:=39/36pt#;    % uppercase curve breadth
+cap_ess#:=39/36pt#;    % breadth in middle of uppercase s
+rule_thickness#:=39/36pt#;  % thickness of lines in math symbols
+
+dish#:=0pt#;      % amount erased at top or bottom of serifs
+bracket#:=0pt#;      % vertical distance from serif base to tangent
+jut#:=25/36pt#;      % protrusion of lowercase serifs
+cap_jut#:=25/36pt#;    % protrusion of uppercase serifs
+beak_jut#:=0pt#;    % horizontal protrusion of beak serifs
+beak#:=27/36pt#;    % vertical protrusion of beak serifs
+vair#:=31/36pt#;    % vertical diameter of hairlines
+notch_cut#:=22/36pt#;    % maximum breadth above or below notches
+bar#:=30/36pt#;      % lowercase bar thickness
+slab#:=30/36pt#;    % serif and arm thickness
+cap_bar#:=30/36pt#;    % uppercase bar thickness
+cap_band#:=30/36pt#;    % uppercase thickness above/below lobes
+cap_notch_cut#:=22/36pt#;  % max breadth above/below uppercase notches
+serif_drop#:=0pt#;    % vertical drop of sloped serifs
+stem_corr#:=0pt#;    % for small refinements of stem breadth
+vair_corr#:=0pt#;    % for small refinements of hairline height
+apex_corr#:=8/36pt#;    % extra width at diagonal junctions
+
+o#:=1.5/36pt#;      % amount of overshoot for curves
+apex_o#:=1/36pt#;    % amount of overshoot for diagonal junctions
+
+slant:=0;      % tilt ratio $(\Delta x/\Delta y)$
+fudge:=0.81;      % factor applied to weights of heavy characters
+math_spread:=-1;    % extra openness of math symbols
+superness:=8/11;    % parameter for superellipses
+superpull:=0;      % extra openness inside bowls
+beak_darkness:=0;    % fraction of triangle inside beak serifs
+ligs:=0;      % level of ligatures to be included
+
+square_dots:=false;    % should dots be square?
+hefty:=true;      % should we try hard not to be overweight?
+serifs:=true;      % should serifs and bulbs be attached?
+monospace:=true;    % should all characters have the same width?
+variant_g:=false;    % should an italic-style g be used?
+low_asterisk:=true;    % should the asterisk be centered at the axis?
+math_fitting:=false;    % should math-mode spacing be used?
+
+generate roman      % switch to the driver file


Property changes on: trunk/Master/texmf-dist/fonts/source/public/cm-mf-extra-bold/cmbtt8.mf
___________________________________________________________________
Added: svn:eol-style
## -0,0 +1 ##
+native
\ No newline at end of property
Added: trunk/Master/texmf-dist/fonts/source/public/cm-mf-extra-bold/cmbtt9.mf
===================================================================
--- trunk/Master/texmf-dist/fonts/source/public/cm-mf-extra-bold/cmbtt9.mf	                        (rev 0)
+++ trunk/Master/texmf-dist/fonts/source/public/cm-mf-extra-bold/cmbtt9.mf	2017-11-14 17:38:41 UTC (rev 45796)
@@ -0,0 +1,78 @@
+% Dies ist CMBTT9.MF vom 1.5.89 Ar (W. Kaspar; kaspar at uni-muenster.de)
+% Entstanden aus CMTT9.MF.
+% Public domain (license statement update only: 2017-11-07).
+% Computer Modern Typewriter Text for use with 9 point, bold
+if unknown cmbase: input cmbase fi
+
+font_identifier:="CMTT"; font_size 9pt#;
+
+u#:=18.9/36pt#;      % unit width
+width_adj#:=0pt#;    % width adjustment for certain characters
+serif_fit#:=0pt#;    % extra sidebar near lowercase serifs
+cap_serif_fit#:=0pt#;    % extra sidebar near uppercase serifs
+letter_fit#:=0pt#;    % extra space added to all sidebars
+
+body_height#:=225/36pt#;  % height of tallest characters
+asc_height#:=198/36pt#;    % height of lowercase ascenders
+cap_height#:=198/36pt#;    % height of caps
+fig_height#:=198/36pt#;    % height of numerals
+x_height#:=142/36pt#;    % height of lowercase without ascenders
+math_axis#:=99/36pt#;    % axis of symmetry for math symbols
+bar_height#:=69/36pt#;    % height of crossbar in lowercase e
+comma_depth#:=45/36pt#;    % depth of comma below baseline
+desc_depth#:=72/36pt#;    % depth of lowercase descenders
+
+crisp#:=21/36pt#;    % diameter of serif corners
+tiny#:=34/36pt#;    % diameter of rounded corners
+fine#:=31/36pt#;    % diameter of sharply rounded corners
+thin_join#:=33/36pt#;    % width of extrafine details
+hair#:=33/36pt#;    % lowercase hairline breadth
+stem#:=40/36pt#;    % lowercase stem breadth
+curve#:=38/36pt#;    % lowercase curve breadth
+ess#:=31/36pt#;      % breadth in middle of lowercase s
+flare#:=41/36pt#;    % diameter of bulbs or breadth of terminals
+dot_size#:=48/36pt#;    % diameter of dots
+cap_hair#:=41/36pt#;    % uppercase hairline breadth
+cap_stem#:=41/36pt#;    % uppercase stem breadth
+cap_curve#:=41/36pt#;    % uppercase curve breadth
+cap_ess#:=41/36pt#;    % breadth in middle of uppercase s
+rule_thickness#:=41/36pt#;  % thickness of lines in math symbols
+
+dish#:=0pt#;      % amount erased at top or bottom of serifs
+bracket#:=0pt#;      % vertical distance from serif base to tangent
+jut#:=28/36pt#;      % protrusion of lowercase serifs
+cap_jut#:=28/36pt#;    % protrusion of uppercase serifs
+beak_jut#:=0pt#;    % horizontal protrusion of beak serifs
+beak#:=31/36pt#;    % vertical protrusion of beak serifs
+vair#:=32/36pt#;    % vertical diameter of hairlines
+notch_cut#:=24/36pt#;    % maximum breadth above or below notches
+bar#:=33/36pt#;      % lowercase bar thickness
+slab#:=33/36pt#;    % serif and arm thickness
+cap_bar#:=33/36pt#;    % uppercase bar thickness
+cap_band#:=33/36pt#;    % uppercase thickness above/below lobes
+cap_notch_cut#:=24/36pt#;  % max breadth above/below uppercase notches
+serif_drop#:=0pt#;    % vertical drop of sloped serifs
+stem_corr#:=0pt#;    % for small refinements of stem breadth
+vair_corr#:=0pt#;    % for small refinements of hairline height
+apex_corr#:=9/36pt#;    % extra width at diagonal junctions
+
+o#:=1.8/36pt#;      % amount of overshoot for curves
+apex_o#:=1/36pt#;    % amount of overshoot for diagonal junctions
+
+slant:=0;      % tilt ratio $(\Delta x/\Delta y)$
+fudge:=0.81;      % factor applied to weights of heavy characters
+math_spread:=-1;    % extra openness of math symbols
+superness:=8/11;    % parameter for superellipses
+superpull:=0;      % extra openness inside bowls
+beak_darkness:=0;    % fraction of triangle inside beak serifs
+ligs:=0;      % level of ligatures to be included
+
+square_dots:=false;    % should dots be square?
+hefty:=true;      % should we try hard not to be overweight?
+serifs:=true;      % should serifs and bulbs be attached?
+monospace:=true;    % should all characters have the same width?
+variant_g:=false;    % should an italic-style g be used?
+low_asterisk:=true;    % should the asterisk be centered at the axis?
+math_fitting:=false;    % should math-mode spacing be used?
+
+generate roman      % switch to the driver file


Property changes on: trunk/Master/texmf-dist/fonts/source/public/cm-mf-extra-bold/cmbtt9.mf
___________________________________________________________________
Added: svn:eol-style
## -0,0 +1 ##
+native
\ No newline at end of property
Added: trunk/Master/texmf-dist/fonts/source/public/cm-mf-extra-bold/cmexb10.mf
===================================================================
--- trunk/Master/texmf-dist/fonts/source/public/cm-mf-extra-bold/cmexb10.mf	                        (rev 0)
+++ trunk/Master/texmf-dist/fonts/source/public/cm-mf-extra-bold/cmexb10.mf	2017-11-14 17:38:41 UTC (rev 45796)
@@ -0,0 +1,88 @@
+% Computer Modern Math Extension Bold 10 point
+% Modification of cmex10 by Sami Sozuer. August 10 1994. 
+% Released under the GNU GPL, any version.
+% (License update only: 2017-11-11)
+
+if unknown cmbase: input cmbase fi
+
+font_identifier:="CMEXB"; font_size 10pt#;
+
+u#:=20/36pt#;      % unit width, must be the same as cmex10 (circle stuff)
+width_adj#:=0pt#;    % width adjustment for certain characters
+serif_fit#:=0pt#;    % extra sidebar near lowercase serifs
+cap_serif_fit#:=5/36pt#;  % extra sidebar near uppercase serifs
+letter_fit#:=0pt#;    % extra space added to all sidebars
+
+body_height#:=270/36pt#;  % height of tallest characters
+asc_height#:=250/36pt#;    % height of lowercase ascenders
+cap_height#:=246/36pt#;    % height of caps
+fig_height#:=232/36pt#;    % height of numerals
+x_height#:=155/36pt#;    % height of lowercase without ascenders
+math_axis#:=90/36pt#;    % axis of symmetry for math symbols
+bar_height#:=87/36pt#;    % height of crossbar in lowercase e
+comma_depth#:=70/36pt#;    % depth of comma below baseline
+desc_depth#:=70/36pt#;    % depth of lowercase descenders
+
+crisp#:=0pt#;      % diameter of serif corners
+tiny#:=8/36pt#;      % diameter of rounded corners
+fine#:=7/36pt#;      % diameter of sharply rounded corners
+thin_join#:=9.5/36pt#;    % width of extrafine details
+hair#:=13.5/36pt#;      % lowercase hairline breadth
+stem#:=37/36pt#;    % lowercase stem breadth
+curve#:=42/36pt#;    % lowercase curve breadth
+ess#:=40/36pt#;      % breadth in middle of lowercase s
+flare#:=46/36pt#;    % diameter of bulbs or breadth of terminals
+dot_size#:=48/36pt#;    % diameter of dots
+cap_hair#:=16/36pt#;    % uppercase hairline breadth
+cap_stem#:=47/36pt#;    % uppercase stem breadth
+cap_curve#:=50/36pt#;    % uppercase curve breadth
+cap_ess#:=47/36pt#;    % breadth in middle of uppercase s
+rule_thickness#:=.58pt#;    % thickness of lines in math symbols
+
+dish#:=1/36pt#;      % amount erased at top or bottom of serifs
+bracket#:=20/36pt#;    % vertical distance from serif base to tangent
+jut#:=28/36pt#;      % protrusion of lowercase serifs
+cap_jut#:=37/36pt#;    % protrusion of uppercase serifs
+beak_jut#:=10/36pt#;    % horizontal protrusion of beak serifs
+beak#:=70/36pt#;    % vertical protrusion of beak serifs
+vair#:=10.5/36pt#;      % vertical diameter of hairlines
+notch_cut#:=15pt#;    % maximum breadth above or below notches
+bar#:=16/36pt#;      % lowercase bar thickness
+slab#:=16/36pt#;    % serif and arm thickness
+cap_bar#:=16/36pt#;    % uppercase bar thickness
+cap_band#:=16/36pt#;    % uppercase thickness above/below lobes
+cap_notch_cut#:=16pt#;    % max breadth above/below uppercase notches
+serif_drop#:=4/36pt#;    % vertical drop of sloped serifs
+stem_corr#:=1/36pt#;    % for small refinements of stem breadth
+vair_corr#:=1/36pt#;    % for small refinements of hairline height
+apex_corr#:=0pt#;    % extra width at diagonal junctions
+
+o#:=8/36pt#;      % amount of overshoot for curves
+apex_o#:=8/36pt#;    % amount of overshoot for diagonal junctions
+
+slant:=0;      % tilt ratio $(\Delta x/\Delta y)$
+fudge:=1;      % factor applied to weights of heavy characters
+math_spread:=0;      % extra openness of math symbols
+superness:=1/sqrt2;    % parameter for superellipses
+superpull:=1/6;      % extra openness inside bowls
+beak_darkness:=11/30;    % fraction of triangle inside beak serifs
+ligs:=2;      % level of ligatures to be included
+
+square_dots:=false;    % should dots be square?
+hefty:=false;      % should we try hard not to be overweight?
+serifs:=true;      % should serifs and bulbs be attached?
+monospace:=false;    % should all characters have the same width?
+variant_g:=false;    % should an italic-style g be used?
+low_asterisk:=false;    % should the asterisk be centered at the axis?
+math_fitting:=false;    % should math-mode spacing be used?
+
+% the following font parameters are explained in {\sl The \TeX book}, Appendix G
+fontdimen 8:  % parameters $\xi_8$ through $\xi_{13}$ will now be listed
+ rule_thickness#,  % default\_rule\_thickness
+ 40/36pt#,    % big\_op\_spacing1
+ 60/36pt#,    % big\_op\_spacing2
+ 72/36pt#,    % big\_op\_spacing3
+ 216/36pt#,    % big\_op\_spacing4
+ 36/36pt#;    % big\_op\_spacing5
+
+generate mathex      % switch to the driver file


Property changes on: trunk/Master/texmf-dist/fonts/source/public/cm-mf-extra-bold/cmexb10.mf
___________________________________________________________________
Added: svn:eol-style
## -0,0 +1 ##
+native
\ No newline at end of property
Added: trunk/Master/texmf-dist/fonts/source/public/cm-mf-extra-bold/cmttb10.mf
===================================================================
--- trunk/Master/texmf-dist/fonts/source/public/cm-mf-extra-bold/cmttb10.mf	                        (rev 0)
+++ trunk/Master/texmf-dist/fonts/source/public/cm-mf-extra-bold/cmttb10.mf	2017-11-14 17:38:41 UTC (rev 45796)
@@ -0,0 +1,77 @@
+% Computer Modern Typewriter Text Bold for use with 10 point
+% Adopted from cmtt10 with ascender heights comparable to cmr10.
+% Public domain (license statement update only: 2017-11-07).
+if unknown cmbase: input cmbase fi
+
+font_identifier:="XXBTT"; font_size 10pt#;
+
+u#:=22/36pt#;      % unit width (extend slightly)
+width_adj#:=0pt#;    % width adjustment for certain characters
+serif_fit#:=0pt#;    % extra sidebar near lowercase serifs
+cap_serif_fit#:=0pt#;    % extra sidebar near uppercase serifs
+letter_fit#:=0pt#;    % extra space added to all sidebars
+
+body_height#:=250/36pt#;  % height of tallest characters
+asc_height#:=220/36pt#;    % height of lowercase ascenders
+cap_height#:=220/36pt#;    % height of caps
+fig_height#:=220/36pt#;    % height of numerals
+x_height#:=160/36pt#;    % height of lowercase without ascenders
+math_axis#:=110/36pt#;    % axis of symmetry for math symbols
+bar_height#:=77/36pt#;    % height of crossbar in lowercase e
+comma_depth#:=50/36pt#;    % depth of comma below baseline
+desc_depth#:=80/36pt#;    % depth of lowercase descenders
+
+crisp#:=22/36pt#;    % diameter of serif corners
+tiny#:=22/36pt#;    % diameter of rounded corners
+fine#:=21/36pt#;    % diameter of sharply rounded corners
+thin_join#:=29/36pt#;    % width of extrafine details
+hair#:=34/36pt#;    % lowercase hairline breadth
+stem#:=34/36pt#;    % lowercase stem breadth
+curve#:=34/36pt#;    % lowercase curve breadth
+ess#:=30/36pt#;      % breadth in middle of lowercase s
+flare#:=35/36pt#;    % diameter of bulbs or breadth of terminals
+dot_size#:=49/36pt#;    % diameter of dots
+cap_hair#:=34/36pt#;    % uppercase hairline breadth
+cap_stem#:=34/36pt#;    % uppercase stem breadth
+cap_curve#:=34/36pt#;    % uppercase curve breadth
+cap_ess#:=34/36pt#;    % breadth in middle of uppercase s
+rule_thickness#:=34/36pt#;  % thickness of lines in math symbols
+
+dish#:=0pt#;      % amount erased at top or bottom of serifs
+bracket#:=0pt#;      % vertical distance from serif base to tangent
+jut#:=32/36pt#;      % protrusion of lowercase serifs
+cap_jut#:=32/36pt#;    % protrusion of uppercase serifs
+beak_jut#:=0pt#;    % horizontal protrusion of beak serifs
+beak#:=34/36pt#;    % vertical protrusion of beak serifs
+vair#:=30/36pt#;    % vertical diameter of hairlines
+notch_cut#:=40/36pt#;    % maximum breadth above or below notches
+bar#:=30/36pt#;      % lowercase bar thickness
+slab#:=30/36pt#;    % serif and arm thickness
+cap_bar#:=30/36pt#;    % uppercase bar thickness
+cap_band#:=30/36pt#;    % uppercase thickness above/below lobes
+cap_notch_cut#:=55/36pt#;  % max breadth above/below uppercase notches
+serif_drop#:=0pt#;    % vertical drop of sloped serifs
+stem_corr#:=0pt#;    % for small refinements of stem breadth
+vair_corr#:=0pt#;    % for small refinements of hairline height
+apex_corr#:=11/36pt#;    % extra width at diagonal junctions
+
+o#:=3/36pt#;      % amount of overshoot for curves
+apex_o#:=2/36pt#;    % amount of overshoot for diagonal junctions
+
+slant:=0;      % tilt ratio $(\Delta x/\Delta y)$
+fudge:=0.81;      % factor applied to weights of heavy characters
+math_spread:=-1;    % extra openness of math symbols
+superness:=8/11;    % parameter for superellipses
+superpull:=0;      % extra openness inside bowls
+beak_darkness:=0;    % fraction of triangle inside beak serifs
+ligs:=0;      % level of ligatures to be included
+
+square_dots:=false;    % should dots be square?
+hefty:=true;      % should we try hard not to be overweight?
+serifs:=true;      % should serifs and bulbs be attached?
+monospace:=true;    % should all characters have the same width?
+variant_g:=false;    % should an italic-style g be used?
+low_asterisk:=true;    % should the asterisk be centered at the axis?
+math_fitting:=false;    % should math-mode spacing be used?
+
+generate roman      % switch to the driver file


Property changes on: trunk/Master/texmf-dist/fonts/source/public/cm-mf-extra-bold/cmttb10.mf
___________________________________________________________________
Added: svn:eol-style
## -0,0 +1 ##
+native
\ No newline at end of property
Deleted: trunk/Master/texmf-dist/fonts/tfm/public/cm/cmbcsc10.tfm
===================================================================
(Binary files differ)

Added: trunk/Master/texmf-dist/fonts/tfm/public/cm-mf-extra-bold/cmbcsc10.tfm
===================================================================
(Binary files differ)

Index: trunk/Master/texmf-dist/fonts/tfm/public/cm-mf-extra-bold/cmbcsc10.tfm
===================================================================
--- trunk/Master/texmf-dist/fonts/tfm/public/cm-mf-extra-bold/cmbcsc10.tfm	2017-11-14 08:49:25 UTC (rev 45795)
+++ trunk/Master/texmf-dist/fonts/tfm/public/cm-mf-extra-bold/cmbcsc10.tfm	2017-11-14 17:38:41 UTC (rev 45796)

Property changes on: trunk/Master/texmf-dist/fonts/tfm/public/cm-mf-extra-bold/cmbcsc10.tfm
___________________________________________________________________
Added: svn:mime-type
## -0,0 +1 ##
+application/octet-stream
\ No newline at end of property
Added: trunk/Master/texmf-dist/fonts/tfm/public/cm-mf-extra-bold/cmbtex10.tfm
===================================================================
(Binary files differ)

Index: trunk/Master/texmf-dist/fonts/tfm/public/cm-mf-extra-bold/cmbtex10.tfm
===================================================================
--- trunk/Master/texmf-dist/fonts/tfm/public/cm-mf-extra-bold/cmbtex10.tfm	2017-11-14 08:49:25 UTC (rev 45795)
+++ trunk/Master/texmf-dist/fonts/tfm/public/cm-mf-extra-bold/cmbtex10.tfm	2017-11-14 17:38:41 UTC (rev 45796)

Property changes on: trunk/Master/texmf-dist/fonts/tfm/public/cm-mf-extra-bold/cmbtex10.tfm
___________________________________________________________________
Added: svn:mime-type
## -0,0 +1 ##
+application/octet-stream
\ No newline at end of property
Added: trunk/Master/texmf-dist/fonts/tfm/public/cm-mf-extra-bold/cmbtt10.tfm
===================================================================
(Binary files differ)

Index: trunk/Master/texmf-dist/fonts/tfm/public/cm-mf-extra-bold/cmbtt10.tfm
===================================================================
--- trunk/Master/texmf-dist/fonts/tfm/public/cm-mf-extra-bold/cmbtt10.tfm	2017-11-14 08:49:25 UTC (rev 45795)
+++ trunk/Master/texmf-dist/fonts/tfm/public/cm-mf-extra-bold/cmbtt10.tfm	2017-11-14 17:38:41 UTC (rev 45796)

Property changes on: trunk/Master/texmf-dist/fonts/tfm/public/cm-mf-extra-bold/cmbtt10.tfm
___________________________________________________________________
Added: svn:mime-type
## -0,0 +1 ##
+application/octet-stream
\ No newline at end of property
Added: trunk/Master/texmf-dist/fonts/tfm/public/cm-mf-extra-bold/cmbtt8.tfm
===================================================================
(Binary files differ)

Index: trunk/Master/texmf-dist/fonts/tfm/public/cm-mf-extra-bold/cmbtt8.tfm
===================================================================
--- trunk/Master/texmf-dist/fonts/tfm/public/cm-mf-extra-bold/cmbtt8.tfm	2017-11-14 08:49:25 UTC (rev 45795)
+++ trunk/Master/texmf-dist/fonts/tfm/public/cm-mf-extra-bold/cmbtt8.tfm	2017-11-14 17:38:41 UTC (rev 45796)

Property changes on: trunk/Master/texmf-dist/fonts/tfm/public/cm-mf-extra-bold/cmbtt8.tfm
___________________________________________________________________
Added: svn:mime-type
## -0,0 +1 ##
+application/octet-stream
\ No newline at end of property
Added: trunk/Master/texmf-dist/fonts/tfm/public/cm-mf-extra-bold/cmbtt9.tfm
===================================================================
(Binary files differ)

Index: trunk/Master/texmf-dist/fonts/tfm/public/cm-mf-extra-bold/cmbtt9.tfm
===================================================================
--- trunk/Master/texmf-dist/fonts/tfm/public/cm-mf-extra-bold/cmbtt9.tfm	2017-11-14 08:49:25 UTC (rev 45795)
+++ trunk/Master/texmf-dist/fonts/tfm/public/cm-mf-extra-bold/cmbtt9.tfm	2017-11-14 17:38:41 UTC (rev 45796)

Property changes on: trunk/Master/texmf-dist/fonts/tfm/public/cm-mf-extra-bold/cmbtt9.tfm
___________________________________________________________________
Added: svn:mime-type
## -0,0 +1 ##
+application/octet-stream
\ No newline at end of property
Added: trunk/Master/texmf-dist/fonts/tfm/public/cm-mf-extra-bold/cmttb10.tfm
===================================================================
(Binary files differ)

Index: trunk/Master/texmf-dist/fonts/tfm/public/cm-mf-extra-bold/cmttb10.tfm
===================================================================
--- trunk/Master/texmf-dist/fonts/tfm/public/cm-mf-extra-bold/cmttb10.tfm	2017-11-14 08:49:25 UTC (rev 45795)
+++ trunk/Master/texmf-dist/fonts/tfm/public/cm-mf-extra-bold/cmttb10.tfm	2017-11-14 17:38:41 UTC (rev 45796)

Property changes on: trunk/Master/texmf-dist/fonts/tfm/public/cm-mf-extra-bold/cmttb10.tfm
___________________________________________________________________
Added: svn:mime-type
## -0,0 +1 ##
+application/octet-stream
\ No newline at end of property
Modified: trunk/Master/tlpkg/bin/tlpkg-ctan-check
===================================================================
--- trunk/Master/tlpkg/bin/tlpkg-ctan-check	2017-11-14 08:49:25 UTC (rev 45795)
+++ trunk/Master/tlpkg/bin/tlpkg-ctan-check	2017-11-14 17:38:41 UTC (rev 45796)
@@ -149,7 +149,7 @@
     cite citeall cje cjhebrew cjk cjk-gs-integrate cjk-ko cjkpunct
     classics classpack classicthesis
     cleanthesis clearsans clefval cleveref clipboard
-    clock cloze clrscode clrscode3e cm-lgc cm-super cm-unicode
+    clock cloze clrscode clrscode3e cm-lgc cm-mf-extra-bold cm-super cm-unicode
     cmap cmarrows cmbright cmcyr
     cmdstring cmdtrack cmexb cmextra cmll cmpica cmpj cmsd cmtiup
     cnbwp cnltx cntformats cntperchap

Modified: trunk/Master/tlpkg/tlpsrc/biber.tlpsrc
===================================================================
--- trunk/Master/tlpkg/tlpsrc/biber.tlpsrc	2017-11-14 08:49:25 UTC (rev 45795)
+++ trunk/Master/tlpkg/tlpsrc/biber.tlpsrc	2017-11-14 17:38:41 UTC (rev 45796)
@@ -9,6 +9,6 @@
 i386-solaris,\
 powerpc-darwin,\
 powerpc-linux,\
+sparc-solaris,\
 x86_64-darwinlegacy,\
-sparc-solaris\
   bin/${ARCH}/biber

Added: trunk/Master/tlpkg/tlpsrc/cm-mf-extra-bold.tlpsrc
===================================================================
Modified: trunk/Master/tlpkg/tlpsrc/collection-fontsextra.tlpsrc
===================================================================
--- trunk/Master/tlpkg/tlpsrc/collection-fontsextra.tlpsrc	2017-11-14 08:49:25 UTC (rev 45795)
+++ trunk/Master/tlpkg/tlpsrc/collection-fontsextra.tlpsrc	2017-11-14 17:38:41 UTC (rev 45796)
@@ -62,6 +62,7 @@
 depend cinzel
 depend clearsans
 depend cm-lgc
+depend cm-mf-extra-bold
 depend cm-unicode
 depend cmbright
 depend cmexb



More information about the tex-live-commits mailing list