texlive[44299] Master: autoupdate
commits+karl at tug.org
commits+karl at tug.org
Fri May 12 02:02:47 CEST 2017
Revision: 44299
http://tug.org/svn/texlive?view=revision&revision=44299
Author: karl
Date: 2017-05-12 02:02:47 +0200 (Fri, 12 May 2017)
Log Message:
-----------
autoupdate
Modified Paths:
--------------
trunk/Master/texmf-dist/ls-R
trunk/Master/tlpkg/texlive.tlpdb
Modified: trunk/Master/texmf-dist/ls-R
===================================================================
--- trunk/Master/texmf-dist/ls-R 2017-05-11 22:45:29 UTC (rev 44298)
+++ trunk/Master/texmf-dist/ls-R 2017-05-12 00:02:47 UTC (rev 44299)
@@ -42292,6 +42292,7 @@
mpattern
mpcolornames
mpman-ru
+mptrees
piechartmp
repere
roundrect
@@ -43588,6 +43589,11 @@
mpman-ru.tex
mpman.ist
+./doc/metapost/mptrees:
+README.md
+mptrees-doc.pdf
+mptrees-doc.tex
+
./doc/metapost/piechartmp:
INSTALL
LEGAL
@@ -133965,6 +133971,7 @@
mparrows
mpattern
mpcolornames
+mptrees
nkarta
piechartmp
repere
@@ -134336,6 +134343,9 @@
mpcolornames-spec-xcolor-sty.mp
mpcolornames.mp
+./metapost/mptrees:
+mptrees.mp
+
./metapost/nkarta:
nkarta.mp
nkchars.mp
@@ -135728,7 +135738,6 @@
texdirflatten
./scripts/texdoc:
-Data.meta.lua
Data.tlpdb.lua
alias.tlu
config.tlu
Modified: trunk/Master/tlpkg/texlive.tlpdb
===================================================================
--- trunk/Master/tlpkg/texlive.tlpdb 2017-05-11 22:45:29 UTC (rev 44298)
+++ trunk/Master/tlpkg/texlive.tlpdb 2017-05-12 00:02:47 UTC (rev 44299)
@@ -24,11 +24,11 @@
depend container_split_src_files/1
depend minrelease/2016
depend release/2017
-depend revision/44286
+depend revision/44298
name 00texlive.image
category TLCore
-revision 44269
+revision 44297
shortdesc TeX Live files only in the source repository
longdesc The files here are not copied by the installer and containers
longdesc are not built for them; they exist only in the source
@@ -2222,6 +2222,7 @@
tlpkg/tlpsrc/mpman-ru.tlpsrc
tlpkg/tlpsrc/mpostinl.tlpsrc
tlpkg/tlpsrc/mptopdf.tlpsrc
+ tlpkg/tlpsrc/mptrees.tlpsrc
tlpkg/tlpsrc/ms.tlpsrc
tlpkg/tlpsrc/msc.tlpsrc
tlpkg/tlpsrc/msg.tlpsrc
@@ -6316,10 +6317,11 @@
longdesc file formats are: PS (PostScript), EPS, PDF, PNG, JPEG, TIFF,
longdesc PNM, BMP, GIF, LBM, XPM, PCX, TGA. Accepted output formats are:
longdesc EPS, PCL5, PDF, PDF1, PBM, PGM, PPM, PS, markedEPS, markedPS,
-longdesc PNG, XWD, BMP, TIFF, JPEG, GIF, XPM. a2ping delegates the low-
-longdesc level work to Ghostscript (GS), pdftops and sam2p. a2ping fixes
-longdesc many glitches during the EPS to EPS conversion, so its output
-longdesc is often more compatible and better embeddable than its input.
+longdesc PNG, XWD, BMP, TIFF, JPEG, GIF, XPM. a2ping delegates the
+longdesc low-level work to Ghostscript (GS), pdftops and sam2p. a2ping
+longdesc fixes many glitches during the EPS to EPS conversion, so its
+longdesc output is often more compatible and better embeddable than its
+longdesc input.
depend a2ping.ARCH
docfiles size=8
texmf-dist/doc/man/man1/a2ping.1
@@ -8695,8 +8697,8 @@
longdesc Options supported by the package include: letterpaper for US
longdesc letter; a4offset for a modified A4 layout suitable for platic
longdesc binders that cover a part of the left margin. The class's
-longdesc handling of dates has inspired an extended version of date-
-longdesc handling in the isodate package. The class supersedes an
+longdesc handling of dates has inspired an extended version of
+longdesc date-handling in the isodate package. The class supersedes an
longdesc earlier class called myletter.
docfiles size=69
texmf-dist/doc/latex/akletter/akletter.tex
@@ -11842,8 +11844,8 @@
longdesc Modern Mono 10 Regular. Every glyph and OpenType feature of the
longdesc Latin Modern Mono has been retained, with minor improvements.
longdesc On the other hand, we have changed the vertical metrics of the
-longdesc font. Although the Arabic script is designed to use the same x-
-longdesc size as Latin Modern Mono, the former script needs greater
+longdesc font. Although the Arabic script is designed to use the same
+longdesc x-size as Latin Modern Mono, the former script needs greater
longdesc ascender and descender space. Every Arabic glyph in each
longdesc Unicode-code block is supported (up to Unicode 7.0): Arabic,
longdesc Arabic Supplement, Arabic Extended, Arabic Presentation-Forms
@@ -13001,10 +13003,10 @@
revision 44166
shortdesc American Mathematical Society plain TeX macros
longdesc AMSTeX is a TeX macro package, originally written by Michael
-longdesc Spivak for the American Mathematical Society (AMS) during 1983-
-longdesc 1985 and is described in the book 'The Joy of TeX'. It is based
-longdesc on Plain TeX, and provides many features for producing more
-longdesc professional-looking maths formulas with less burden on
+longdesc Spivak for the American Mathematical Society (AMS) during
+longdesc 1983-1985 and is described in the book 'The Joy of TeX'. It is
+longdesc based on Plain TeX, and provides many features for producing
+longdesc more professional-looking maths formulas with less burden on
longdesc authors. More recently, the focus of attention has switched to
longdesc amslatex, but AMSTeX remains as a working system.
depend tex
@@ -14194,12 +14196,12 @@
shortdesc Format documents in APA style (6th edition)
longdesc The class formats documents in APA style (6th Edition). It
longdesc provides a full set of facilities in three different output
-longdesc modes (journal-like appearance, double-spaced manuscript, LaTeX-
-longdesc like document), in contrast to the earlier apa6e, which only
-longdesc formats double-spaced manuscripts in APA style. The class can
-longdesc mask author identity for copies for use in masked peer review.
-longdesc The class is a development of the apa class (which is no longer
-longdesc maintained).
+longdesc modes (journal-like appearance, double-spaced manuscript,
+longdesc LaTeX-like document), in contrast to the earlier apa6e, which
+longdesc only formats double-spaced manuscripts in APA style. The class
+longdesc can mask author identity for copies for use in masked peer
+longdesc review. The class is a development of the apa class (which is
+longdesc no longer maintained).
docfiles size=163
texmf-dist/doc/latex/apa6/README details="Readme"
texmf-dist/doc/latex/apa6/apa6.pdf details="Package documentation"
@@ -14756,11 +14758,11 @@
longdesc This package provides for LuaLaTeX an ArabTeX-like interface to
longdesc generate Arabic writing from an ascii transliteration. It is
longdesc particularly well-suited for complex documents such as
-longdesc technical documents or critical editions where a lot of left-to-
-longdesc right commands intertwine with Arabic writing. arabluatex is
-longdesc able to process any ArabTeX input notation. Its output can be
-longdesc set in the same modes of vocalization as ArabTeX, or in
-longdesc different roman transliterations. It further allows many
+longdesc technical documents or critical editions where a lot of
+longdesc left-to-right commands intertwine with Arabic writing.
+longdesc arabluatex is able to process any ArabTeX input notation. Its
+longdesc output can be set in the same modes of vocalization as ArabTeX,
+longdesc or in different roman transliterations. It further allows many
longdesc typographical refinements. It will eventually interact with
longdesc some other packages yet to come to produce from .tex source
longdesc files, in addition to printed books, TEI xml compliant critical
@@ -15699,9 +15701,9 @@
longdesc computer projector. In such a context, Arev Sans is quite
longdesc readable, with large x-height, "open letters", wide spacing,
longdesc and thick stems. The style is very similar to the SliTeX font
-longdesc lcmss, but heavier. Arev is one of a very small number of sans-
-longdesc font mathematics support packages. Others are cmbright, hvmath
-longdesc and kerkis.
+longdesc lcmss, but heavier. Arev is one of a very small number of
+longdesc sans-font mathematics support packages. Others are cmbright,
+longdesc hvmath and kerkis.
execute addMap arev.map
docfiles size=232
texmf-dist/doc/fonts/arev/ArevSansLicense.txt
@@ -18865,9 +18867,9 @@
longdesc provides some additional features not available in Acrobat,
longdesc such as the ability to use arbitrary LaTeX code for the file
longdesc icon -- including things like \includegraphics, tabular, and
-longdesc mathematics. Settings can be made either globally or on a per-
-longdesc attachment basis. Attachfile makes it easy to attach files and
-longdesc customize their appearance in the enclosing document. The
+longdesc mathematics. Settings can be made either globally or on a
+longdesc per-attachment basis. Attachfile makes it easy to attach files
+longdesc and customize their appearance in the enclosing document. The
longdesc package supports the Created, Modified, and Size keys in the
longdesc EmbeddedFile's Params dictionary.
docfiles size=90
@@ -20437,8 +20439,8 @@
shortdesc Babel support for documents written in Greek
longdesc The file provides modes for monotonic (single-diacritic) and
longdesc polytonic (multiple-diacritic) modes of writing. Provision is
-longdesc made for Greek function names in mathematics, and for classical-
-longdesc era symbols.
+longdesc made for Greek function names in mathematics, and for
+longdesc classical-era symbols.
docfiles size=282
texmf-dist/doc/generic/babel-greek/README details="Readme"
texmf-dist/doc/generic/babel-greek/README.html details="Readme (HTML)"
@@ -21035,8 +21037,8 @@
revision 30292
shortdesc Babel support for typesetting Slovak
longdesc The package provides the language definition file for support
-longdesc of Slovak in babel, including Slovak variants of LaTeX built-in-
-longdesc names. Shortcuts are also defined.
+longdesc of Slovak in babel, including Slovak variants of LaTeX
+longdesc built-in-names. Shortcuts are also defined.
docfiles size=48
texmf-dist/doc/generic/babel-slovak/slovak.pdf details="Package documentation"
srcfiles size=14
@@ -23121,9 +23123,9 @@
revision 32924
shortdesc Class for book-type documents written in Basque
longdesc The class is derived from the LaTeX book class. The extensions
-longdesc solve grammatical and numeration issues that occur when book-
-longdesc type documents are written in Basque. The class is useful for
-longdesc writing books, PhD and Master Theses, etc., in Basque.
+longdesc solve grammatical and numeration issues that occur when
+longdesc book-type documents are written in Basque. The class is useful
+longdesc for writing books, PhD and Master Theses, etc., in Basque.
docfiles size=117
texmf-dist/doc/latex/basque-book/README details="Readme"
texmf-dist/doc/latex/basque-book/basque-book.pdf details="Package documentation (English)" language="en"
@@ -24223,9 +24225,9 @@
longdesc posters may be created very rapidly. Features include: scalable
longdesc fonts using the fp and type1cm packages; posters in A-series
longdesc sizes, and custom sizes like double A0 are possible; still
-longdesc applicable to custom beamer slides, e.g. 16:9 slides for a wide-
-longdesc screen (i.e. 1.78 aspect ratio); orientation may be portrait or
-longdesc landscape; a 'debug mode' is provided.
+longdesc applicable to custom beamer slides, e.g. 16:9 slides for a
+longdesc wide-screen (i.e. 1.78 aspect ratio); orientation may be
+longdesc portrait or landscape; a 'debug mode' is provided.
docfiles size=22
texmf-dist/doc/latex/beamerposter/README details="Readme"
texmf-dist/doc/latex/beamerposter/beamerposter.pdf details="Package documentation (PDF)"
@@ -24600,8 +24602,8 @@
category Package
revision 18651
shortdesc Free replacement for basic MathTime fonts
-longdesc This package replaces the original MathTime fonts, not MathTime-
-longdesc Plus or MathTime Professional (the last being the only
+longdesc This package replaces the original MathTime fonts, not
+longdesc MathTime-Plus or MathTime Professional (the last being the only
longdesc currently available commercial bundle).
execute addMap belleek.map
docfiles size=1
@@ -25261,8 +25263,8 @@
shortdesc Packages by Javier Bezos
longdesc A set of packages that provide: tools for maths accents; a tool
longdesc that changes page-numbering in frontmatter to arabic; tools for
-longdesc dealing with some annoyances in babel; a tool for making end-
-longdesc environment checking more meaningful; tensorial indexes;
+longdesc dealing with some annoyances in babel; a tool for making
+longdesc end-environment checking more meaningful; tensorial indexes;
longdesc support for multi-file documents; tools for easy entry of
longdesc Spanish index entries; dotless i's and j's for maths fonts; and
longdesc fancy underlining.
@@ -25857,8 +25859,8 @@
shortdesc French translation of classical BibTeX styles
longdesc These files are French translations of the classical BibTeX
longdesc style files. The translations can easily be modified by simply
-longdesc redefining FUNCTIONs named fr.*, at the beginning (lines 50-
-longdesc 150) of each file.
+longdesc redefining FUNCTIONs named fr.*, at the beginning (lines
+longdesc 50-150) of each file.
docfiles size=2
texmf-dist/doc/bibtex/bib-fr/CHANGELOG
texmf-dist/doc/bibtex/bib-fr/README details="Readme"
@@ -26043,8 +26045,9 @@
shortdesc Extract a BibTeX file based on a .aux file
longdesc A Bourne shell script that uses BibTeX to extract bibliography
longdesc entries that are \cite'd in a document. It can also expand a
-longdesc BibTeX file, expanding the abbreviations (other than the built-
-longdesc in ones like month names) and following the cross-references.
+longdesc BibTeX file, expanding the abbreviations (other than the
+longdesc built-in ones like month names) and following the
+longdesc cross-references.
depend bibexport.ARCH
docfiles size=64
texmf-dist/doc/bibtex/bibexport/README details="Readme"
@@ -26587,8 +26590,8 @@
longdesc publications. It implements and automates most of the
longdesc guidelines in the APA 6th edition style guide for citations and
longdesc references with a few (documented) exceptions (which are mainly
-longdesc currently impossible to automate in principle for any BibTeX-
-longdesc backed system). An example document is also given which
+longdesc currently impossible to automate in principle for any
+longdesc BibTeX-backed system). An example document is also given which
longdesc typesets every citation and reference example in the APA 6th
longdesc edition style guide. This version of the package requires use
longdesc of BibLaTeX v2.4 and biber v3.3 (at least).
@@ -26642,8 +26645,8 @@
longdesc prehistory of the Deutsches Archaologisches Institut (German
longdesc Archaeological Institute), since these are referenced by most
longdesc guidelines in German prehistory and medieval archaeology and
-longdesc serve as a kind of template. It contains verbose and author-
-longdesc date styles as well.
+longdesc serve as a kind of template. It contains verbose and
+longdesc author-date styles as well.
docfiles size=1042
texmf-dist/doc/latex/biblatex-archaeology/README.md details="Readme"
texmf-dist/doc/latex/biblatex-archaeology/biblatex-archaeology-examples.bib
@@ -26879,8 +26882,8 @@
shortdesc Manage book edited in other entry type
longdesc This package provides new BibLaTeX entry types and fields for
longdesc book edited in other types, like for instance @bookinarticle.
-longdesc It offers more types than the older package biblatex-
-longdesc bookinarticle which it superseeds.
+longdesc It offers more types than the older package
+longdesc biblatex-bookinarticle which it superseeds.
docfiles size=148
texmf-dist/doc/latex/biblatex-bookinother/README details="Readme"
texmf-dist/doc/latex/biblatex-bookinother/documentation/biblatex-bookinother.pdf details="Package documentation"
@@ -27027,12 +27030,13 @@
category Package
revision 44156
shortdesc Chicago style files for BibLaTeX
-longdesc This is a BibLaTeX style that implements the Chicago 'author-
-longdesc date' and 'notes with bibliography' style specifications given
-longdesc in the Chicago Manual of Style, 16th edition (support for the
-longdesc 15th edition remains, but is 'strongly deprecated'). The style
-longdesc implements entry types for citing audio-visual materials. The
-longdesc package was previously known as biblatex-chicago-notes-df.
+longdesc This is a BibLaTeX style that implements the Chicago
+longdesc 'author-date' and 'notes with bibliography' style
+longdesc specifications given in the Chicago Manual of Style, 16th
+longdesc edition (support for the 15th edition remains, but is 'strongly
+longdesc deprecated'). The style implements entry types for citing
+longdesc audio-visual materials. The package was previously known as
+longdesc biblatex-chicago-notes-df.
docfiles size=1856
texmf-dist/doc/latex/biblatex-chicago/README details="Readme and usage outline"
texmf-dist/doc/latex/biblatex-chicago/RELEASE
@@ -27357,9 +27361,9 @@
longdesc BibLaTeX conventions, and can be used simply by loading
longdesc BibLaTeX with the appropriate option:
longdesc \usepackage[style=ieee]{biblatex} A demonstration database is
-longdesc provided to show how to format input for the style. biblatex-
-longdesc ieee requires BibLaTeX 2.7 or later, and works with both BibTeX
-longdesc and Biber as the database back-end.
+longdesc provided to show how to format input for the style.
+longdesc biblatex-ieee requires BibLaTeX 2.7 or later, and works with
+longdesc both BibTeX and Biber as the database back-end.
docfiles size=175
texmf-dist/doc/latex/biblatex-ieee/LICENSE.md
texmf-dist/doc/latex/biblatex-ieee/README.md details="Readme"
@@ -28650,8 +28654,8 @@
revision 43549
shortdesc BibTeX Perl Libraries
longdesc This package provides BibTeX related Perl libraries by Gerhard
-longdesc Gossen, repacked by Boris Veytsman, for TeX Live and other TDS-
-longdesc compliant distributions. The libraries are written in pure
+longdesc Gossen, repacked by Boris Veytsman, for TeX Live and other
+longdesc TDS-compliant distributions. The libraries are written in pure
longdesc Perl, so should work out of the box on any architecture. They
longdesc have been packaged here mostly for Boris Veytsman's BibTeX
longdesc suite, but can be used in any other Perl script.
@@ -29374,10 +29378,10 @@
longdesc Biochemistry-colors.sty defines the standard colors of
longdesc biochemistry for use with the color package and the xcolor
longdesc package. xcolor is loaded by Biochemistry-colors.sty. Colors
-longdesc include: Shapely-colors for amino acids and nucleotides. CPK-
-longdesc Colors (Corey, Pauling and Koltun) of elements. Jmol-colors of
-longdesc elements, important isotopes and structures. Glycopedia colors
-longdesc for sugars.
+longdesc include: Shapely-colors for amino acids and nucleotides.
+longdesc CPK-Colors (Corey, Pauling and Koltun) of elements. Jmol-colors
+longdesc of elements, important isotopes and structures. Glycopedia
+longdesc colors for sugars.
docfiles size=50
texmf-dist/doc/latex/biochemistry-colors/Biochemistry-colors.pdf details="Package documentation"
texmf-dist/doc/latex/biochemistry-colors/Biochemistry-colors.xls
@@ -30315,8 +30319,8 @@
longdesc Insular Minuscule (6th cenury onwards); Carolingian Minuscule
longdesc (8th-12th centuries); Early Gothic (11th-12th centuries);
longdesc Gothic Textura Quadrata (13th-15th centuries); Gothic Textura
-longdesc Prescisus vel sine pedibus (13th century onwards); Rotunda (13-
-longdesc 15th centuries); Humanist Minuscule (14th century onwards);
+longdesc Prescisus vel sine pedibus (13th century onwards); Rotunda
+longdesc (13-15th centuries); Humanist Minuscule (14th century onwards);
longdesc Uncial (3rd-6th centuries); Half Uncial (3rd-9th centuries);
longdesc Artificial Uncial (6th-10th centuries); and Insular Majuscule
longdesc (6th-9th centuries).
@@ -30988,9 +30992,9 @@
shortdesc Mathematical alphabets derived from the STIX fonts
longdesc The package contains a number of PostScript fonts derived from
longdesc the STIX OpenType fonts that may be used in maths mode in
-longdesc regular and bold weights for calligraphic, fraktur and double-
-longdesc struck alphabets. Virtual fonts with metrics suitable for maths
-longdesc mode are provided, as are LaTeX support files.
+longdesc regular and bold weights for calligraphic, fraktur and
+longdesc double-struck alphabets. Virtual fonts with metrics suitable
+longdesc for maths mode are provided, as are LaTeX support files.
execute addMap boondox.map
docfiles size=28
texmf-dist/doc/fonts/boondox/README details="Readme"
@@ -31086,8 +31090,8 @@
longdesc matrix, and the program takes care of computing the dimensions
longdesc of the arrows and realizing the pagesetting. All the user has
longdesc to do about the arrows is to specify their type (monomorphism,
-longdesc pair of adjoint arrows, etc.) and their direction (north, south-
-longdesc east, etc.); 12 types and 32 directions are available.
+longdesc pair of adjoint arrows, etc.) and their direction (north,
+longdesc south-east, etc.); 12 types and 32 directions are available.
docfiles size=23
texmf-dist/doc/generic/borceux/Diagram_Mode_d_Emploi
texmf-dist/doc/generic/borceux/Diagram_Read_Me
@@ -31293,8 +31297,8 @@
revision 39701
shortdesc A Class for Typesetting Brazilian legal texts
longdesc This class implements rules to typeset Brazilian legal texts.
-longdesc Its purpose is to be an easy-to-use implementation for the end-
-longdesc user.
+longdesc Its purpose is to be an easy-to-use implementation for the
+longdesc end-user.
docfiles size=27
texmf-dist/doc/latex/br-lex/README details="Readme"
texmf-dist/doc/latex/br-lex/brlex-doc.pdf details="Package documentation" language="pt-br"
@@ -31468,19 +31472,19 @@
revision 43071
shortdesc Automatic line breaking of displayed equations
longdesc The package provides solutions to a number of common
-longdesc difficulties in writing displayed equations and getting high-
-longdesc quality output. For example, it is a well-known inconvenience
-longdesc that if an equation must be broken into more than one line,
-longdesc 'left...right' constructs cannot span lines. The breqn package
-longdesc makes them work as one would expect whether or not there is an
-longdesc intervening line break. The single most ambitious goal of the
-longdesc package, however, is to support automatic linebreaking of
-longdesc displayed equations. Such linebreaking cannot be done without
-longdesc substantial changes under the hood in the way formulae are
-longdesc processed; the code must be watched carefully, keeping an eye
-longdesc on possible glitches. The bundle also contains the flexisym and
-longdesc mathstyle packages, which are both designated as support for
-longdesc breqn.
+longdesc difficulties in writing displayed equations and getting
+longdesc high-quality output. For example, it is a well-known
+longdesc inconvenience that if an equation must be broken into more than
+longdesc one line, 'left...right' constructs cannot span lines. The
+longdesc breqn package makes them work as one would expect whether or
+longdesc not there is an intervening line break. The single most
+longdesc ambitious goal of the package, however, is to support automatic
+longdesc linebreaking of displayed equations. Such linebreaking cannot
+longdesc be done without substantial changes under the hood in the way
+longdesc formulae are processed; the code must be watched carefully,
+longdesc keeping an eye on possible glitches. The bundle also contains
+longdesc the flexisym and mathstyle packages, which are both designated
+longdesc as support for breqn.
docfiles size=282
texmf-dist/doc/latex/breqn/README.md details="Readme"
texmf-dist/doc/latex/breqn/breqn.pdf details="Package documentation"
@@ -31897,8 +31901,8 @@
longdesc This single-function package enables authors to specify a
longdesc global driver option (dvips, dvipdfmx, etc) which is applied
longdesc only when the engine outputs a DVI file. It is useful to create
-longdesc special document- templates that can be compiled in both PDF-
-longdesc mode and DVI-mode.
+longdesc special document- templates that can be compiled in both
+longdesc PDF-mode and DVI-mode.
docfiles size=2
texmf-dist/doc/latex/bxdvidriver/LICENSE
texmf-dist/doc/latex/bxdvidriver/README.md details="Readme"
@@ -32075,8 +32079,8 @@
longdesc This package enables users to specify in their sources the
longdesc following settings on the PDF document to output: PDF version
longdesc (1.4, 1.5 etc.); whether or not to compress streams; whether or
-longdesc not to use object streams. This package supports all major PDF-
-longdesc output engines and dvipdfmx.
+longdesc not to use object streams. This package supports all major
+longdesc PDF-output engines and dvipdfmx.
docfiles size=6
texmf-dist/doc/latex/bxpdfver/LICENSE
texmf-dist/doc/latex/bxpdfver/README-ja.md details="Readme" language="ja"
@@ -33184,8 +33188,8 @@
longdesc The package prints a calendar for 2 or more years, according to
longdesc a language selection. The package is also "culture dependent",
longdesc in the sense that it will start weeks according to local rules:
-longdesc e.g., weeks conventionally start on Monday in the English-
-longdesc speaking world. It requires array, babel, and geometry.
+longdesc e.g., weeks conventionally start on Monday in the
+longdesc English-speaking world. It requires array, babel, and geometry.
docfiles size=108
texmf-dist/doc/latex/calxxxx-yyyy/README details="Readme"
texmf-dist/doc/latex/calxxxx-yyyy/README.pdf details="Outline of usage"
@@ -38532,9 +38536,9 @@
category Package
revision 15878
shortdesc Page numbering by chapter
-longdesc The package provides for 'chapterno-pageno' or 'chaptername-
-longdesc pageno' page numbering. Provision is made for front- and
-longdesc backmatter in book class.
+longdesc The package provides for 'chapterno-pageno' or
+longdesc 'chaptername-pageno' page numbering. Provision is made for
+longdesc front- and backmatter in book class.
docfiles size=51
texmf-dist/doc/latex/chappg/chappg.pdf details="Package documentation"
srcfiles size=6
@@ -39134,9 +39138,9 @@
longdesc molecules using the tikz package. The <code> argument provides
longdesc instructions for the drawing operation. While the diagrams
longdesc produced are essentially 2-dimensional, the package supports
-longdesc many of the conventional notations for illustrating the 3-
-longdesc dimensional layout of a molecule. The package uses TikZ for its
-longdesc actual drawing operations.
+longdesc many of the conventional notations for illustrating the
+longdesc 3-dimensional layout of a molecule. The package uses TikZ for
+longdesc its actual drawing operations.
docfiles size=616
texmf-dist/doc/generic/chemfig/README details="Readme"
texmf-dist/doc/generic/chemfig/chemfig-en.pdf details="Package documentation (English)" language="en"
@@ -40142,9 +40146,9 @@
category Package
revision 28552
shortdesc Bibliography style for Chalmers University of Technology
-longdesc The package, heavily based on the harvard package for Harvard-
-longdesc style citations, provides a citation suite for students at
-longdesc Chalmers University of Technology that follows given
+longdesc The package, heavily based on the harvard package for
+longdesc Harvard-style citations, provides a citation suite for students
+longdesc at Chalmers University of Technology that follows given
longdesc recommendations.
docfiles size=48
texmf-dist/doc/latex/chscite/README details="Readme"
@@ -40167,8 +40171,8 @@
shortdesc Typeset documents in Church Slavonic language using Unicode
longdesc The package provides fonts, hyphenation patterns, and
longdesc supporting macros to typeset Church Slavonic texts. It depends
-longdesc on the following other packages: fonts-churchslavonic, hyph-
-longdesc utf8, intcalc, etoolbox, and xcolor.
+longdesc on the following other packages: fonts-churchslavonic,
+longdesc hyph-utf8, intcalc, etoolbox, and xcolor.
depend fonts-churchslavonic
depend hyphen-churchslavonic
depend etoolbox
@@ -40315,9 +40319,9 @@
longdesc with wires. The package also contains an American resistor
longdesc symbol for those of us on that side of the Atlantic. The
longdesc package also has simple facilities for producing optics
-longdesc diagrams; however, no-one would deny that the PSTricks pst-
-longdesc optic package, or the MetaPost makecirc package does the job
-longdesc better.
+longdesc diagrams; however, no-one would deny that the PSTricks
+longdesc pst-optic package, or the MetaPost makecirc package does the
+longdesc job better.
docfiles size=81
texmf-dist/doc/latex/circ/COPYING
texmf-dist/doc/latex/circ/README details="Readme"
@@ -40490,9 +40494,9 @@
longdesc support for various Asian scripts in many encodings (including
longdesc Unicode): Chinese (both traditional and simplified), Japanese,
longdesc Korean and Thai. A special add-on feature is an interface to
-longdesc the Emacs editor (cjk-enc.el) which gives simultaneous, easy-to-
-longdesc use support to a bunch of other scripts in addition to the
-longdesc above -- Cyrillic, Greek, Latin-based scripts, Russian and
+longdesc the Emacs editor (cjk-enc.el) which gives simultaneous,
+longdesc easy-to-use support to a bunch of other scripts in addition to
+longdesc the above -- Cyrillic, Greek, Latin-based scripts, Russian and
longdesc Vietnamese are supported.
depend arphic
depend cns
@@ -48222,8 +48226,8 @@
category Collection
revision 44195
shortdesc Japanese
-longdesc Support for Japanese; additional packages in collection-
-longdesc langcjk.
+longdesc Support for Japanese; additional packages in
+longdesc collection-langcjk.
depend collection-langcjk
depend babel-japanese
depend bxbase
@@ -49860,7 +49864,7 @@
name collection-metapost
category Collection
-revision 39729
+revision 44297
shortdesc MetaPost and Metafont packages
depend collection-basic
depend automata
@@ -49894,6 +49898,7 @@
depend mpattern
depend mpcolornames
depend mpgraphics
+depend mptrees
depend piechartmp
depend repere
depend roex
@@ -51416,10 +51421,10 @@
longdesc separated by commas. The package filesdo provides the command
longdesc \DoWithBasesExts: \DoWithBasesExts{<cmd>}{<bases>}{<exts>}
longdesc which runs the single parameter command <cmd> on each file
-longdesc whose base and extension are respectively from the comma-
-longdesc separated lists <bases> and <exts>. These 'loop'-like commands
-longdesc are (themselves) entirely expandable. The packages rely on
-longdesc packages plainpkg, and stacklet
+longdesc whose base and extension are respectively from the
+longdesc comma-separated lists <bases> and <exts>. These 'loop'-like
+longdesc commands are (themselves) entirely expandable. The packages
+longdesc rely on packages plainpkg, and stacklet
docfiles size=148
texmf-dist/doc/generic/commado/README details="Readme"
texmf-dist/doc/generic/commado/SrcFILEs.txt
@@ -55647,9 +55652,9 @@
category ConTeXt
revision 23167
shortdesc A BNF module for ConTeXt
-longdesc The module provides a simple way to write good-looking BNF-
-longdesc style grammars in ConTeXt. Grammars are written using the BNF
-longdesc syntax right in your ConTeXt documents, so there is a clear
+longdesc The module provides a simple way to write good-looking
+longdesc BNF-style grammars in ConTeXt. Grammars are written using the
+longdesc BNF syntax right in your ConTeXt documents, so there is a clear
longdesc separation between content and layout. This allows the user to
longdesc decide exactly how the grammar is to be displayed, while also
longdesc allowing the gist of the grammar to be understood from simply
@@ -56064,8 +56069,9 @@
revision 23171
shortdesc Notes on using ConTeXt MkIV
longdesc An introductory tutorial on ConTeXt, in Chinese. The document
-longdesc covers ConTeXt installation, fonts, layout design, cross-
-longdesc reference, project structure, metafun and presentation design.
+longdesc covers ConTeXt installation, fonts, layout design,
+longdesc cross-reference, project structure, metafun and presentation
+longdesc design.
depend context
docfiles size=252
texmf-dist/doc/context/third/context-notes-zh-cn/README details="Readme"
@@ -58277,9 +58283,9 @@
revision 43704
shortdesc Linguistic support
longdesc Numerous minor LaTeX enhancements for linguistics, including
-longdesc multiple accents on the same letter, interline glosses (word-by-
-longdesc word translations), Discourse Representation Structures, and
-longdesc example numbering.
+longdesc multiple accents on the same letter, interline glosses
+longdesc (word-by-word translations), Discourse Representation
+longdesc Structures, and example numbering.
docfiles size=136
texmf-dist/doc/latex/covington/README details="Readme"
texmf-dist/doc/latex/covington/covington.pdf details="Package documentation" language="en"
@@ -58536,8 +58542,8 @@
revision 15878
shortdesc Crossreferences within documents
longdesc The package defines cross-references (essentially 'grand' label
-longdesc references), which may be listed in a table of cross-
-longdesc references.
+longdesc references), which may be listed in a table of
+longdesc cross-references.
docfiles size=17
texmf-dist/doc/latex/crossreference/README details="Readme"
texmf-dist/doc/latex/crossreference/crossreference.pdf details="Package documentation"
@@ -62011,8 +62017,8 @@
longdesc to a format compatible with the fp package; datapie.sty: a
longdesc database may be represented as a pie chart; flexible options
longdesc allow colouring of the chart, and annotation hooks are
-longdesc available; dataplot.sty: a database may be represented as a 2-
-longdesc dimensional scatter or line plot; flexible options control of
+longdesc available; dataplot.sty: a database may be represented as a
+longdesc 2-dimensional scatter or line plot; flexible options control of
longdesc the plot's overall appearance, and of legends and other extra
longdesc information; databar.sty: a database may be represented as a
longdesc bar chart; overall appearance, colouring and annotation are
@@ -62021,13 +62027,13 @@
longdesc sorting and collating instead of using an external indexing
longdesc application, such as xindy or makeindex; databib.sty: a
longdesc bibliography may be loaded into a datatool database, and
-longdesc manipulated there before being printed (this permits a LaTeX-
-longdesc based route to printing bibliographies in formats for which no
-longdesc BibTeX style is available); and person.sty: provides support
-longdesc for displaying a person's name and pronoun in a document, thus
-longdesc avoiding cumbersome use of "he/she", etc. The drawing packages
-longdesc make use of PGF/TikZ for their output. The bundle supersedes
-longdesc and replaces the author's csvtools bundle.
+longdesc manipulated there before being printed (this permits a
+longdesc LaTeX-based route to printing bibliographies in formats for
+longdesc which no BibTeX style is available); and person.sty: provides
+longdesc support for displaying a person's name and pronoun in a
+longdesc document, thus avoiding cumbersome use of "he/she", etc. The
+longdesc drawing packages make use of PGF/TikZ for their output. The
+longdesc bundle supersedes and replaces the author's csvtools bundle.
docfiles size=803
texmf-dist/doc/latex/datatool/CHANGES
texmf-dist/doc/latex/datatool/INSTALL
@@ -62235,12 +62241,13 @@
longdesc time zones and redefines \today to use the same formatting
longdesc style. In addition to \today, you can also use \DTMcurrenttime
longdesc (current time) or \DTMnow (current date and time). Dates and
-longdesc times can be saved for later use. The accompanying datetime2-
-longdesc calc package can be used to convert date-times to UTC+00:00.
-longdesc Language and regional support is provided by independently
-longdesc maintained and installed modules. The datetime2-calc package
-longdesc uses the pgfcalendar package (part of the PGF/TikZ bundle).
-longdesc This package replaces datetime.sty which is now obsolete.
+longdesc times can be saved for later use. The accompanying
+longdesc datetime2-calc package can be used to convert date-times to
+longdesc UTC+00:00. Language and regional support is provided by
+longdesc independently maintained and installed modules. The
+longdesc datetime2-calc package uses the pgfcalendar package (part of
+longdesc the PGF/TikZ bundle). This package replaces datetime.sty which
+longdesc is now obsolete.
docfiles size=256
texmf-dist/doc/latex/datetime2/CHANGES
texmf-dist/doc/latex/datetime2/README details="Readme"
@@ -62519,9 +62526,9 @@
longdesc Britain and Northern Ireland) en-US (English - United States of
longdesc America) en-CA (English - Canada) en-AU (English - Commonwealth
longdesc of Australia) en-NZ (English - New Zealand) en-GG (English -
-longdesc Bailiwick of Guernsey) en-JE (English - Bailiwick of Jersey) en-
-longdesc IM (English - Isle of Man) en-MT (English - Republic of Malta)
-longdesc en-IE (English - Republic of Ireland)
+longdesc Bailiwick of Guernsey) en-JE (English - Bailiwick of Jersey)
+longdesc en-IM (English - Isle of Man) en-MT (English - Republic of
+longdesc Malta) en-IE (English - Republic of Ireland)
docfiles size=161
texmf-dist/doc/latex/datetime2-english/CHANGES
texmf-dist/doc/latex/datetime2-english/README details="Readme"
@@ -64284,10 +64291,10 @@
category Package
revision 39589
shortdesc Delimiter commands that are easy to use and resize
-longdesc This package provides commands to give a consistent, easy-to-
-longdesc remember, easy to edit way to control the size and blackness of
-longdesc delimiters: append 1-4 "b"s to command for larger sizes;
-longdesc prepend "B" for for boldface. These commands reduce the
+longdesc This package provides commands to give a consistent,
+longdesc easy-to-remember, easy to edit way to control the size and
+longdesc blackness of delimiters: append 1-4 "b"s to command for larger
+longdesc sizes; prepend "B" for for boldface. These commands reduce the
longdesc likelihood of incomplete delimeter pairs and typically use
longdesc fewer characters than the LaTeX default.
docfiles size=61
@@ -64881,11 +64888,11 @@
longdesc book is detailed here. Other formats, such as HTML or screen
longdesc optimized PDF, are available from the package home page. Books
longdesc included are: "LaTeX for Complete Novices": an introductory
-longdesc guide to LaTeX. "Using LaTeX to Write a PhD Thesis": a follow-
-longdesc on from "LaTeX for Complete Novices" geared towards students
-longdesc who want to use LaTeX to write their PhD thesis. "Creating a
-longdesc LaTeX minimal example": describes how to create a minimal
-longdesc example, which can be used as a debugging aid when you
+longdesc guide to LaTeX. "Using LaTeX to Write a PhD Thesis": a
+longdesc follow-on from "LaTeX for Complete Novices" geared towards
+longdesc students who want to use LaTeX to write their PhD thesis.
+longdesc "Creating a LaTeX minimal example": describes how to create a
+longdesc minimal example, which can be used as a debugging aid when you
longdesc encounter errors in your LaTeX documents.
docfiles size=2142
texmf-dist/doc/latex/dickimaw/ERRATA
@@ -65253,8 +65260,8 @@
revision 15878
shortdesc An address book using BibTeX
longdesc A package for LaTeX and BibTeX that facilitates the
-longdesc construction, maintenance and exploitation of an address book-
-longdesc like database.
+longdesc construction, maintenance and exploitation of an address
+longdesc book-like database.
docfiles size=56
texmf-dist/doc/latex/directory/README details="Package Readme"
texmf-dist/doc/latex/directory/directory.pdf details="Package documentation"
@@ -66716,10 +66723,10 @@
longdesc intended to be a full-body text font, but its larger sizes can
longdesc also be used for simple display purposes, and its significant
longdesc body of symbols can stand on its own. It comes complete with
-longdesc textual ("old-style") and lining figures, and even has small-
-longdesc caps figures. It also comes with extensible decorative rules to
-longdesc be used with ornaments from itself or other fonts, along with
-longdesc an extremely flexible ellipsis package.
+longdesc textual ("old-style") and lining figures, and even has
+longdesc small-caps figures. It also comes with extensible decorative
+longdesc rules to be used with ornaments from itself or other fonts,
+longdesc along with an extremely flexible ellipsis package.
docfiles size=1005
texmf-dist/doc/fonts/drm/CHANGES
texmf-dist/doc/fonts/drm/OFL.txt
@@ -72194,8 +72201,8 @@
category Package
revision 15878
shortdesc Print EAN13 for ISBN
-longdesc The package provides the means to typeset ISBN codes with EAN-
-longdesc 13; it uses the (generic) package ean13.tex to typeset the
+longdesc The package provides the means to typeset ISBN codes with
+longdesc EAN-13; it uses the (generic) package ean13.tex to typeset the
longdesc actual barcode.
docfiles size=87
texmf-dist/doc/latex/ean13isbn/License.txt
@@ -72932,9 +72939,9 @@
revision 29466
shortdesc ebook
longdesc The package defines a command \ebook that defines page layout,
-longdesc fonts, and font-sizes for documents to be rendered as PDF-
-longdesc ebooks on small ebook-readers. The package has been tested with
-longdesc Kindle e-ink and iPad mini.
+longdesc fonts, and font-sizes for documents to be rendered as
+longdesc PDF-ebooks on small ebook-readers. The package has been tested
+longdesc with Kindle e-ink and iPad mini.
docfiles size=1
texmf-dist/doc/latex/ebook/README details="Readme"
runfiles size=1
@@ -75514,8 +75521,8 @@
category Package
revision 29349
shortdesc Examples from the book Einfuhrung in LaTeX
-longdesc The bundle consists of examples and data files for the DANTE-
-longdesc Edition book "Einfuhrung in LaTeX"
+longdesc The bundle consists of examples and data files for the
+longdesc DANTE-Edition book "Einfuhrung in LaTeX"
docfiles size=1167
texmf-dist/doc/latex/einfuehrung/03-01-1.ltxverb
texmf-dist/doc/latex/einfuehrung/03-01-2.xltxverb
@@ -76650,8 +76657,8 @@
category Package
revision 39153
shortdesc Examples from the book Einfuhrung in LaTeX
-longdesc The bundle consists of examples and data files for the DANTE-
-longdesc Edition book "Einfuhrung in LaTeX", second edition 2016.
+longdesc The bundle consists of examples and data files for the
+longdesc DANTE-Edition book "Einfuhrung in LaTeX", second edition 2016.
docfiles size=1369
texmf-dist/doc/latex/einfuehrung2/03-01-1.ltxverb
texmf-dist/doc/latex/einfuehrung2/03-01-2.xltxverb
@@ -78929,8 +78936,8 @@
category Package
revision 43750
shortdesc Running headers of the form "Notes to pp.xx-yy"
-longdesc Endheads provides running headers of the form "Notes to pp. xx-
-longdesc yy" for endnotes sections. It also enables one to reset the
+longdesc Endheads provides running headers of the form "Notes to pp.
+longdesc xx-yy" for endnotes sections. It also enables one to reset the
longdesc endnotes counter, and put a line marking the chapter change in
longdesc the endnotes, at the beginning of every chapter. Endheads
longdesc requires the fancyhdr, needspace, ifthen, and endnotes
@@ -79120,9 +79127,9 @@
shortdesc Control layout of itemize, enumerate, description
longdesc This package provides user control over the layout of the three
longdesc basic list environments: enumerate, itemize and description. It
-longdesc supersedes both enumerate and mdwlist (providing well-
-longdesc structured replacements for all their funtionality), and in
-longdesc addition provides functions to compute the layout of labels,
+longdesc supersedes both enumerate and mdwlist (providing
+longdesc well-structured replacements for all their funtionality), and
+longdesc in addition provides functions to compute the layout of labels,
longdesc and to 'clone' the standard environments, to create new
longdesc environments with counters of their own.
docfiles size=95
@@ -79352,9 +79359,9 @@
category Package
revision 15878
shortdesc Typesetting the Epi-Olmec Language
-longdesc The package contains all the necessary files to typeset Epi-
-longdesc Olmec "documents", in a script used in Southern Middle America
-longdesc until about 500 AD.
+longdesc The package contains all the necessary files to typeset
+longdesc Epi-Olmec "documents", in a script used in Southern Middle
+longdesc America until about 500 AD.
execute addMap epiolmec.map
docfiles size=32
texmf-dist/doc/latex/epiolmec/GlyphAccessCommands.pdf details="Package documentation"
@@ -79597,9 +79604,9 @@
longdesc for use with dvips, still widely used by Plain TeX users (in
longdesc particular). For LaTeX users, the package is nowadays (rather
longdesc strongly) deprecated in favour of the more sophisticated
-longdesc standard LaTeX latex-graphics bundle of packages. (The latex-
-longdesc graphics bundle is also available to Plain TeX users, via its
-longdesc Plain TeX version.)
+longdesc standard LaTeX latex-graphics bundle of packages. (The
+longdesc latex-graphics bundle is also available to Plain TeX users, via
+longdesc its Plain TeX version.)
docfiles size=98
texmf-dist/doc/generic/epsf/LICENSE
texmf-dist/doc/generic/epsf/Makefile
@@ -80249,12 +80256,12 @@
longdesc that end, the eqparbox package defines a new command,
longdesc \eqparbox, which works just like \parbox, except that instead
longdesc of specifying a width, one specifies a tag. All eqparboxes with
-longdesc the same tag--regardless of where they are in the document--
-longdesc will stretch to fit the widest eqparbox with that tag. This
-longdesc simple, equal-width mechanism can be used for a variety of
-longdesc alignment purposes, as is evidenced by the examples in
-longdesc eqparbox's documentation. Various derivatives of \eqparbox are
-longdesc also provided.
+longdesc the same tag--regardless of where they are in the
+longdesc document--will stretch to fit the widest eqparbox with that
+longdesc tag. This simple, equal-width mechanism can be used for a
+longdesc variety of alignment purposes, as is evidenced by the examples
+longdesc in eqparbox's documentation. Various derivatives of \eqparbox
+longdesc are also provided.
docfiles size=102
texmf-dist/doc/latex/eqparbox/README details="Readme"
texmf-dist/doc/latex/eqparbox/eqparbox.pdf details="Package documentation"
@@ -82485,17 +82492,17 @@
shortdesc Euler virtual math fonts
longdesc The well-known Euler fonts are suitable for typsetting
longdesc mathematics in conjunction with a variety of text fonts which
-longdesc do not provide mathematical character sets of their own. Euler-
-longdesc VM is a set of virtual mathematics fonts based on Euler and CM.
-longdesc This approach has several advantages over immediately using the
-longdesc real Euler fonts: Most noticeably, less TeX resources are
-longdesc consumed, the quality of various math symbols is improved and a
-longdesc usable \hslash symbol can be provided. The virtual fonts are
-longdesc accompanied by a LaTeX package which makes them easy to use,
-longdesc particularly in conjunction with Type1 PostScript text fonts.
-longdesc They are compatible with amsmath. A package option allows the
-longdesc fonts to be loaded at 95% of their nominal size, thus blending
-longdesc better with certain text fonts, e.g., Minion.
+longdesc do not provide mathematical character sets of their own.
+longdesc Euler-VM is a set of virtual mathematics fonts based on Euler
+longdesc and CM. This approach has several advantages over immediately
+longdesc using the real Euler fonts: Most noticeably, less TeX resources
+longdesc are consumed, the quality of various math symbols is improved
+longdesc and a usable \hslash symbol can be provided. The virtual fonts
+longdesc are accompanied by a LaTeX package which makes them easy to
+longdesc use, particularly in conjunction with Type1 PostScript text
+longdesc fonts. They are compatible with amsmath. A package option
+longdesc allows the fonts to be loaded at 95% of their nominal size,
+longdesc thus blending better with certain text fonts, e.g., Minion.
docfiles size=32
texmf-dist/doc/latex/eulervm/README.eulervm details="Package Readme"
texmf-dist/doc/latex/eulervm/eulervm.pdf details="Package documentation"
@@ -83020,11 +83027,11 @@
shortdesc Verbatim phrases and listings in LaTeX
longdesc Examplep provides sophisticated features for typesetting
longdesc verbatim source code listings, including the display of the
-longdesc source code and its compiled LaTeX or MetaPost output side-by-
-longdesc side, with automatic width detection and enabled page breaks
-longdesc (in the source), without the need for specifying the source
-longdesc twice. Special care is taken that section, page and footnote
-longdesc numbers do not interfere with the main document. For
+longdesc source code and its compiled LaTeX or MetaPost output
+longdesc side-by-side, with automatic width detection and enabled page
+longdesc breaks (in the source), without the need for specifying the
+longdesc source twice. Special care is taken that section, page and
+longdesc footnote numbers do not interfere with the main document. For
longdesc typesetting short verbatim phrases, a replacement for the \verb
longdesc command is also provided in the package, which can be used
longdesc inside tables and moving arguments such as footnotes and
@@ -83398,8 +83405,8 @@
longdesc diagrams that consist of boxes, lines, and annotations.
longdesc Particular support is provided for creating EXPRESS-G diagrams,
longdesc for example IDEF1X, OMT, Shlaer-Mellor, and NIAM diagrams. The
-longdesc package may also be used to create UML and most other Box-Line-
-longdesc Annotation charts, but not Gantt charts directly.
+longdesc package may also be used to create UML and most other
+longdesc Box-Line-Annotation charts, but not Gantt charts directly.
docfiles size=137
texmf-dist/doc/metapost/expressg/README details="Package Readme"
texmf-dist/doc/metapost/expressg/aamfigs.pdf details="Examples of use"
@@ -83429,13 +83436,14 @@
shortdesc Create exercise sheets and exams
longdesc The package provides the means to create exercises or questions
longdesc and their corresponding solutions. The questions may be divided
-longdesc into classes and/or topics and may be printed selectively. Meta-
-longdesc data to questions can be added and recovered. The solutions may
-longdesc be printed where they are, or collected and printed at a later
-longdesc point in the document all together, section-wise or selectively
-longdesc by ID. The package provides the means to selectively include
-longdesc questions from an external file, and to control the style of
-longdesc headings of both questions and solutions.
+longdesc into classes and/or topics and may be printed selectively.
+longdesc Meta-data to questions can be added and recovered. The
+longdesc solutions may be printed where they are, or collected and
+longdesc printed at a later point in the document all together,
+longdesc section-wise or selectively by ID. The package provides the
+longdesc means to selectively include questions from an external file,
+longdesc and to control the style of headings of both questions and
+longdesc solutions.
docfiles size=198
texmf-dist/doc/latex/exsheets/README details="Readme"
texmf-dist/doc/latex/exsheets/exsheets_en.pdf details="Package documentation"
@@ -92798,14 +92806,14 @@
shortdesc Drawing (linguistic) trees
longdesc The package provides a PGF/TikZ-based mechanism for drawing
longdesc linguistic (and other kinds of) trees. Its main features are: a
-longdesc packing algorithm which can produce very compact trees; a user-
-longdesc friendly interface consisting of the familiar bracket encoding
-longdesc of trees plus the key-value interface to option-setting; many
-longdesc tree-formatting options, with control over option values of
-longdesc individual nodes and mechanisms for their manipulation; the
-longdesc possibility to decorate the tree using the full power of
-longdesc PGF/TikZ; and an externalization mechanism sensitive to code-
-longdesc changes.
+longdesc packing algorithm which can produce very compact trees; a
+longdesc user-friendly interface consisting of the familiar bracket
+longdesc encoding of trees plus the key-value interface to
+longdesc option-setting; many tree-formatting options, with control over
+longdesc option values of individual nodes and mechanisms for their
+longdesc manipulation; the possibility to decorate the tree using the
+longdesc full power of PGF/TikZ; and an externalization mechanism
+longdesc sensitive to code-changes.
depend elocalloc
docfiles size=506
texmf-dist/doc/latex/forest/LICENCE
@@ -93050,11 +93058,11 @@
longdesc Adobe Utopia as its standard base font. Fourier-GUTenberg
longdesc provides all complementary typefaces needed to allow Utopia
longdesc based TeX typesetting, including an extensive mathematics set
-longdesc and several other symbols. The system is absolutely stand-
-longdesc alone: apart from Utopia and Fourier, no other typefaces are
-longdesc required. The fourier fonts will also work with Adobe Utopia
-longdesc Expert fonts, which are only available for purchase. Utopia is
-longdesc a registered trademark of Adobe Systems Incorporated
+longdesc and several other symbols. The system is absolutely
+longdesc stand-alone: apart from Utopia and Fourier, no other typefaces
+longdesc are required. The fourier fonts will also work with Adobe
+longdesc Utopia Expert fonts, which are only available for purchase.
+longdesc Utopia is a registered trademark of Adobe Systems Incorporated
execute addMap fourier.map
execute addMap fourier-utopia-expert.map
docfiles size=49
@@ -93794,10 +93802,10 @@
category Package
revision 24559
shortdesc French cursive hand fonts
-longdesc A hand-writing font in the style of the French academic running-
-longdesc hand. The font was written in Metafont and has been converted
-longdesc to Adobe Type 1 format. LaTeX support (NFFS fd files, and a
-longdesc package) and font maps are provided.
+longdesc A hand-writing font in the style of the French academic
+longdesc running-hand. The font was written in Metafont and has been
+longdesc converted to Adobe Type 1 format. LaTeX support (NFFS fd files,
+longdesc and a package) and font maps are provided.
execute addMap frcursive.map
docfiles size=83
texmf-dist/doc/fonts/frcursive/COPYING
@@ -94967,11 +94975,11 @@
revision 19716
shortdesc Flexible and complete interface to document dimensions
longdesc The package provides an easy and flexible user interface to
-longdesc customize page layout, implementing auto-centering and auto-
-longdesc balancing mechanisms so that the users have only to give the
-longdesc least description for the page layout. For example, if you want
-longdesc to set each margin 2cm without header space, what you need is
-longdesc just \usepackage[margin=2cm,nohead]{geometry}. The package
+longdesc customize page layout, implementing auto-centering and
+longdesc auto-balancing mechanisms so that the users have only to give
+longdesc the least description for the page layout. For example, if you
+longdesc want to set each margin 2cm without header space, what you need
+longdesc is just \usepackage[margin=2cm,nohead]{geometry}. The package
longdesc knows about all the standard paper sizes, so that the user need
longdesc not know what the nominal 'real' dimensions of the paper are,
longdesc just its standard name (such as a4, letter, etc.). An important
@@ -95684,12 +95692,12 @@
category Package
revision 19469
shortdesc A Greek font with a long history
-longdesc GFS Complutum derives, via a long development, from a minuscule-
-longdesc only font cut in the 16th century. An unsatisfactory set of
-longdesc majuscules were added in the early 20th century, but its author
-longdesc died before he could complete the revival of the font. The
-longdesc Greek Font Society has released this version, which has a new
-longdesc set of majuscules.
+longdesc GFS Complutum derives, via a long development, from a
+longdesc minuscule-only font cut in the 16th century. An unsatisfactory
+longdesc set of majuscules were added in the early 20th century, but its
+longdesc author died before he could complete the revival of the font.
+longdesc The Greek Font Society has released this version, which has a
+longdesc new set of majuscules.
execute addMap gfscomplutum.map
docfiles size=26
texmf-dist/doc/fonts/gfscomplutum/OFL-FAQ.txt
@@ -98190,11 +98198,11 @@
revision 44131
shortdesc BibTeX styles to format according to GOST
longdesc BibTeX styles to format bibliographies in English, Russian or
-longdesc Ukrainian according to GOST 7.0.5-2008 or GOST 7.1-2003. Both 8-
-longdesc bit and Unicode (UTF-8) versions of each BibTeX style, in each
-longdesc case offering a choice of sorted and unsorted. Further, a set
-longdesc of three styles (which do not conform to current standards) are
-longdesc retained for backwards compatibility.
+longdesc Ukrainian according to GOST 7.0.5-2008 or GOST 7.1-2003. Both
+longdesc 8-bit and Unicode (UTF-8) versions of each BibTeX style, in
+longdesc each case offering a choice of sorted and unsorted. Further, a
+longdesc set of three styles (which do not conform to current standards)
+longdesc are retained for backwards compatibility.
docfiles size=1160
texmf-dist/doc/bibtex/gost/README.md details="Readme" language="en"
texmf-dist/doc/bibtex/gost/examples/cp1251/bib/ex01.bib
@@ -100062,11 +100070,11 @@
shortdesc Scary and creepy math symbols with AMS-LaTeX integration
longdesc The package defines a handful of commands for typesetting
longdesc mathematical symbols of various kinds, ranging from 'large'
-longdesc operators to extensible arrow-like relations and growing arrow-
-longdesc like math accents that all draw from the classic Halloween-
-longdesc related iconography (pumpkins, witches, ghosts, cats, and so
-longdesc on) while being, at the same time, seamlessly integrated within
-longdesc the rest of the mathematics produced by (AmS-)LaTeX.
+longdesc operators to extensible arrow-like relations and growing
+longdesc arrow-like math accents that all draw from the classic
+longdesc Halloween-related iconography (pumpkins, witches, ghosts, cats,
+longdesc and so on) while being, at the same time, seamlessly integrated
+longdesc within the rest of the mathematics produced by (AmS-)LaTeX.
docfiles size=232
texmf-dist/doc/latex/halloweenmath/00readme.txt details="2nd Readme"
texmf-dist/doc/latex/halloweenmath/Makefile
@@ -102300,8 +102308,8 @@
shortdesc Generate astrological charts in LaTeX
longdesc The horoscop package provides a unified interface for
longdesc astrological font packages; typesetting with pict2e of standard
-longdesc wheel charts and some variations, in PostScript- and PDF-
-longdesc generating TeX engines; and access to external calculation
+longdesc wheel charts and some variations, in PostScript- and
+longdesc PDF-generating TeX engines; and access to external calculation
longdesc software (Astrolog and Swiss Ephemeris) for computing object
longdesc positions.
docfiles size=172
@@ -102478,9 +102486,10 @@
shortdesc Hyperref extensions for use with dvips
longdesc The hypdvips package fixes some problems when using hyperref
longdesc with dvips. It also adds support for breaking links, file
-longdesc attachments, embedded documents and different types of GoTo-
-longdesc links. The cooperation of hyperref with cleveref is improved,
-longdesc which in addition allows an enhanced back-referencing system.
+longdesc attachments, embedded documents and different types of
+longdesc GoTo-links. The cooperation of hyperref with cleveref is
+longdesc improved, which in addition allows an enhanced back-referencing
+longdesc system.
docfiles size=552
texmf-dist/doc/latex/hypdvips/README details="Readme"
texmf-dist/doc/latex/hypdvips/hypdvips.pdf details="Package documentation"
@@ -102765,9 +102774,9 @@
longdesc require hyphenation patterns in the 8-bit encoding of the font
longdesc in use (such encodings are codified in the LaTeX scheme with
longdesc names like OT1, T2A, TS1, OML, LY1, etc). The present package
-longdesc offers a collection of conversions of existing patterns to UTF-
-longdesc 8 format, together with converters for use with 8-bit fonts in
-longdesc older systems. Since hyphenation patterns for Knuthian-style
+longdesc offers a collection of conversions of existing patterns to
+longdesc UTF-8 format, together with converters for use with 8-bit fonts
+longdesc in older systems. Since hyphenation patterns for Knuthian-style
longdesc TeX systems are only read at iniTeX time, it is hoped that the
longdesc UTF-8 patterns, with their converters, will completely supplant
longdesc the older patterns.
@@ -103319,11 +103328,11 @@
longdesc The package includes the latest patterns from dehyph-exptl
longdesc (known to TeX under names 'german', 'ngerman' and
longdesc 'swissgerman'), however 8-bit engines still load old versions
-longdesc of patterns for 'german' and 'ngerman' for backward-
-longdesc compatibility reasons. Swiss German patterns are suitable for
-longdesc Swiss Standard German (Hochdeutsch) not the Alemannic dialects
-longdesc spoken in Switzerland (Schwyzerduetsch). There are no known
-longdesc patterns for written Schwyzerduetsch.
+longdesc of patterns for 'german' and 'ngerman' for
+longdesc backward-compatibility reasons. Swiss German patterns are
+longdesc suitable for Swiss Standard German (Hochdeutsch) not the
+longdesc Alemannic dialects spoken in Switzerland (Schwyzerduetsch).
+longdesc There are no known patterns for written Schwyzerduetsch.
depend hyphen-base
depend hyph-utf8
execute AddHyphen name=german lefthyphenmin=2 righthyphenmin=2 file=loadhyph-de-1901.tex file_patterns=hyph-de-1901.pat.txt file_exceptions=
@@ -103362,8 +103371,8 @@
catalogue elhyphen
shortdesc Modern Greek hyphenation patterns.
longdesc Hyphenation patterns for Modern Greek in monotonic and
-longdesc polytonic spelling in LGR and UTF-8 encodings. Patterns in UTF-
-longdesc 8 use two code positions for each of the vowels with acute
+longdesc polytonic spelling in LGR and UTF-8 encodings. Patterns in
+longdesc UTF-8 use two code positions for each of the vowels with acute
longdesc accent (a.k.a tonos, oxia), e.g., U+03AC, U+1F71 for alpha.
depend hyphen-base
depend hyph-utf8
@@ -104089,8 +104098,8 @@
longdesc Texts Project in 1987 and were suitable for both Modern Turkish
longdesc and Ottoman Turkish in Latin script, however the required
longdesc character set didn't fit into EC encoding, so support for
-longdesc Ottoman Turkish had to be dropped to keep compatibility with 8-
-longdesc bit engines.
+longdesc Ottoman Turkish had to be dropped to keep compatibility with
+longdesc 8-bit engines.
depend hyphen-base
depend hyph-utf8
execute AddHyphen name=turkish lefthyphenmin=2 righthyphenmin=2 file=loadhyph-tr.tex file_patterns=hyph-tr.pat.txt file_exceptions=
@@ -104220,8 +104229,8 @@
longdesc occasionally published in the TeX User Group journal TUGboat.
longdesc This bundle provides alternative Perl and Bourne shell scripts
longdesc to convert the source of such an article into an exceptions
-longdesc file, together with a recent copy of the article and machine-
-longdesc readable files.
+longdesc file, together with a recent copy of the article and
+longdesc machine-readable files.
srcfiles size=59
texmf-dist/source/generic/hyphenex/GNUmakefile
texmf-dist/source/generic/hyphenex/README
@@ -106270,11 +106279,11 @@
longdesc \pdfelapsedtime primitive. Most of these macros use pgfkeys to
longdesc provide a key-value syntax. The package also uses the package
longdesc scrlfile from the Koma-Script bundle (for controlled loading of
-longdesc other files) and etoolbox. The package is bundled with sub-
-longdesc packages containing actual interfaces: by default, the package
-longdesc loads all available sub-packages, but techniques are provided
-longdesc for the user to select no more than the interfaces needed for a
-longdesc job.
+longdesc other files) and etoolbox. The package is bundled with
+longdesc sub-packages containing actual interfaces: by default, the
+longdesc package loads all available sub-packages, but techniques are
+longdesc provided for the user to select no more than the interfaces
+longdesc needed for a job.
docfiles size=320
texmf-dist/doc/latex/interfaces/README details="Readme"
texmf-dist/doc/latex/interfaces/interfaces.pdf details="Package documentation"
@@ -113843,8 +113852,8 @@
revision 15878
catalogue binhex
shortdesc Convert numbers into binary, octal and hexadecimal
-longdesc Provides expandable macros for both fixed-width and minimum-
-longdesc width numbers to bases 2, 4, 8 and 16.
+longdesc Provides expandable macros for both fixed-width and
+longdesc minimum-width numbers to bases 2, 4, 8 and 16.
docfiles size=37
texmf-dist/doc/generic/kastrup/binhex.pdf details="Package documentation"
srcfiles size=7
@@ -114265,10 +114274,10 @@
longdesc When used with the tocdata package, the name also appears in
longdesc the List of Figures. Floats may be placed into a row
longdesc environment, and are typeset to fit within the given number of
-longdesc columns, continuing to the next row if necessary. Nested sub-
-longdesc rows may be used to generate layouts such as two small figures
-longdesc placed vertically next to one larger figure. Subfloats are
-longdesc supported by two environments.
+longdesc columns, continuing to the next row if necessary. Nested
+longdesc sub-rows may be used to generate layouts such as two small
+longdesc figures placed vertically next to one larger figure. Subfloats
+longdesc are supported by two environments.
docfiles size=218
texmf-dist/doc/latex/keyfloat/README.txt details="Readme"
texmf-dist/doc/latex/keyfloat/images/image.pdf
@@ -114361,8 +114370,8 @@
shortdesc Re-usable tables separating content and presentation
longdesc The main goal of the keyvaltable package is to offer means for
longdesc typesetting tables easily and yet still looking rather nicely
-longdesc in a way that separates content from presentation and with re-
-longdesc usable layout for tables of the same type. For this purpose,
+longdesc in a way that separates content from presentation and with
+longdesc re-usable layout for tables of the same type. For this purpose,
longdesc the package provides the environment KeyValTable, which allows
longdesc one to typeset tables that have a previously defined column
longdesc layout and whose rows can be produced in a key-value fashion.
@@ -114403,11 +114412,11 @@
revision 18488
shortdesc A font for KIX codes
longdesc The KIX code is a barcode-like format used by the Dutch PTT to
-longdesc encode country codes, zip codes and street numbers in a machine-
-longdesc readable format. If printed below the address line on bulk
-longdesc mailings, a discount can be obtained. The font is distributed
-longdesc in Metafont format, and covers the numbers and upper-case
-longdesc letters.
+longdesc encode country codes, zip codes and street numbers in a
+longdesc machine-readable format. If printed below the address line on
+longdesc bulk mailings, a discount can be obtained. The font is
+longdesc distributed in Metafont format, and covers the numbers and
+longdesc upper-case letters.
docfiles size=9
texmf-dist/doc/fonts/kixfont/kix.mf.asc
texmf-dist/doc/fonts/kixfont/kixtable.pdf details="Font table"
@@ -115231,8 +115240,8 @@
shortdesc A LaTeX document class for typesetting Korean documents
longdesc The class is based on memoir, and is adapted to typesetting
longdesc Korean documents. The bundle (of class and associated packages)
-longdesc belongs to the ko.TeX bundle. It depends on memoir and kotex-
-longdesc utf to function.
+longdesc belongs to the ko.TeX bundle. It depends on memoir and
+longdesc kotex-utf to function.
depend memoir
depend kotex-utf
docfiles size=98
@@ -115302,9 +115311,9 @@
revision 38558
shortdesc Typeset Hangul, coded in UTF-8
longdesc The package typesets Hangul, which is the native alphabet of
-longdesc the Korean language; input Korean text should be encoded in UTF-
-longdesc 8. The bundle (of class and associated packages) belongs to the
-longdesc ko.TeX bundle.
+longdesc the Korean language; input Korean text should be encoded in
+longdesc UTF-8. The bundle (of class and associated packages) belongs to
+longdesc the ko.TeX bundle.
depend cjk-ko
docfiles size=2066
texmf-dist/doc/latex/kotex-utf/ChangeLog
@@ -115553,11 +115562,11 @@
revision 44223
shortdesc Path searching library for TeX-related files
longdesc Kpathsea is a library and utility programs which provide path
-longdesc searching facilities for TeX file types, including the self-
-longdesc locating feature required for movable installations, layered on
-longdesc top of a general search mechanism. It is not distributed
-longdesc separately, but rather is released and maintained as part of
-longdesc the TeX live sources.
+longdesc searching facilities for TeX file types, including the
+longdesc self-locating feature required for movable installations,
+longdesc layered on top of a general search mechanism. It is not
+longdesc distributed separately, but rather is released and maintained
+longdesc as part of the TeX live sources.
depend kpathsea.ARCH
docfiles size=538
texmf-dist/doc/info/dir
@@ -119370,8 +119379,8 @@
longdesc volumes for publication with Language Science Press
longdesc (http://www.langsci-press.org). It includes all necessary files
longdesc for title pages, frontmatter, main content, list of references
-longdesc and indexes. Dust jackets for BoD and Createspace (print-on-
-longdesc demand service providers) can also be produced.
+longdesc and indexes. Dust jackets for BoD and Createspace
+longdesc (print-on-demand service providers) can also be produced.
docfiles size=34
texmf-dist/doc/xelatex/langsci/README.md details="README.md"
texmf-dist/doc/xelatex/langsci/avm.sty
@@ -119951,8 +119960,8 @@
revision 25831
shortdesc Examples for the book Bibliografien mit LaTeX
longdesc The bundle provides a collection of files containing every
-longdesc example in the book "Bibliografien mit LaTeX" (ISBN 978-
-longdesc 3865414151), by the package author.
+longdesc example in the book "Bibliografien mit LaTeX" (ISBN
+longdesc 978-3865414151), by the package author.
docfiles size=233
texmf-dist/doc/latex/latex-bib-ex/01-01-1.ltx
texmf-dist/doc/latex/latex-bib-ex/01-01-2.ltx
@@ -122264,12 +122273,12 @@
category Package
revision 40613
shortdesc A structured copy of the LaTeX distribution
-longdesc This bundle provides a set of zip file modules containing TDS-
-longdesc compliant trees for items of the LaTeX distribution (both the
-longdesc base system and required packages), together with 'user-
-longdesc friendly' documentation (PDF files with navigation support
-longdesc using bookmarks and links). A further module (knuth) performs
-longdesc the same service for Knuth's software distribution.
+longdesc This bundle provides a set of zip file modules containing
+longdesc TDS-compliant trees for items of the LaTeX distribution (both
+longdesc the base system and required packages), together with
+longdesc 'user-friendly' documentation (PDF files with navigation
+longdesc support using bookmarks and links). A further module (knuth)
+longdesc performs the same service for Knuth's software distribution.
docfiles size=50
texmf-dist/doc/latex/latex-tds/README details="Readme"
texmf-dist/doc/latex/latex-tds/README.html
@@ -122559,8 +122568,8 @@
category Package
revision 42541
shortdesc A French translation of "latex2e-help-texinfo"
-longdesc This package provides a complete French translation of latex2e-
-longdesc help-texinfo.
+longdesc This package provides a complete French translation of
+longdesc latex2e-help-texinfo.
docfiles size=1129
texmf-dist/doc/info/latex2e-fr.info
texmf-dist/doc/latex/latex2e-help-texinfo-fr/ChangeLog
@@ -127785,10 +127794,10 @@
revision 39746
shortdesc Libertine add-on to support Greek and Cyrillic
longdesc The package provides LaTeX support files to access the Greek
-longdesc and Cyrillic glyphs in LinuxLibertine. It functions as an add-
-longdesc on to the libertine package, using filenames and macro names
-longdesc that are compatible with that package. Supported encodings:
-longdesc LGR, T2A, T2B, T2C, OT2.
+longdesc and Cyrillic glyphs in LinuxLibertine. It functions as an
+longdesc add-on to the libertine package, using filenames and macro
+longdesc names that are compatible with that package. Supported
+longdesc encodings: LGR, T2A, T2B, T2C, OT2.
execute addMap libertinegc.map
docfiles size=76
texmf-dist/doc/fonts/libertinegc/README details="Readme"
@@ -127901,8 +127910,8 @@
longdesc bugs in the fonts. The family consists of: Libertinus Serif:
longdesc forked from Linux Libertine. Libertinus Sans: forked from Linux
longdesc Biolinum. Libertinus Mono: forked from Linux Libertine Mono.
-longdesc Libertinus Math: an OpenType math font for use in OpenType math-
-longdesc capable applications like LuaTeX, XeTeX or MS Word 2007+.
+longdesc Libertinus Math: an OpenType math font for use in OpenType
+longdesc math-capable applications like LuaTeX, XeTeX or MS Word 2007+.
docfiles size=1164
texmf-dist/doc/fonts/libertinus/FONTLOG.txt
texmf-dist/doc/fonts/libertinus/OFL.txt
@@ -128483,9 +128492,9 @@
longdesc LibrisADF is a sans-serif family designed to mimic Lydian. The
longdesc bundle includes: fonts, in Adobe Type 1, TrueType and OpenType
longdesc formats, and LaTeX support macros, for use with the Type 1
-longdesc versions of the fonts. The LaTeX macros depend on the nfssext-
-longdesc cfr bundle. GPL licensing applies the fonts themselves; the
-longdesc support macros are distributed under LPPL licensing.
+longdesc versions of the fonts. The LaTeX macros depend on the
+longdesc nfssext-cfr bundle. GPL licensing applies the fonts themselves;
+longdesc the support macros are distributed under LPPL licensing.
execute addMap yly.map
docfiles size=138
texmf-dist/doc/fonts/libris/COPYING
@@ -129112,9 +129121,9 @@
revision 41304
shortdesc Typeset linear operators as they appear in quantum theory or linear algebra
longdesc This small package aims to provide two simple commands and many
-longdesc options to easily write linear operators as they appear in many-
-longdesc body physics, quantum theory, and linear algebra, in any of the
-longdesc ways commonly in use.
+longdesc options to easily write linear operators as they appear in
+longdesc many-body physics, quantum theory, and linear algebra, in any
+longdesc of the ways commonly in use.
docfiles size=63
texmf-dist/doc/latex/linop/README.md details="Readme"
texmf-dist/doc/latex/linop/compact.png
@@ -129874,8 +129883,8 @@
longdesc accented ones, but not exclusively. There is one set of fonts,
longdesc available both in Adobe Type 1 format (*.pfb) and in OpenType
longdesc format (*.otf). There are five sets of TeX Font Metric files,
-longdesc corresponding to: Cork encoding (cork-*.tfm); QX encoding (qx-
-longdesc *.tfm); TeX'n'ANSI aka LY1 encoding (texnansi-*.tfm); T5
+longdesc corresponding to: Cork encoding (cork-*.tfm); QX encoding
+longdesc (qx-*.tfm); TeX'n'ANSI aka LY1 encoding (texnansi-*.tfm); T5
longdesc (Vietnamese) encoding (t5-*.tfm); and Text Companion for EC
longdesc fonts aka TS1 (ts1-*.tfm).
execute addMap lm.map
@@ -131331,10 +131340,10 @@
category Package
revision 15878
shortdesc Generate logarithmic graph paper with LaTeX
-longdesc The logpap package provides four macros for drawing logarithmic-
-longdesc logarithmic, logarithmic-linear, linear-logarithmic and
-longdesc (because it was easy to implement) linear-linear graph paper
-longdesc with LaTeX.
+longdesc The logpap package provides four macros for drawing
+longdesc logarithmic-logarithmic, logarithmic-linear, linear-logarithmic
+longdesc and (because it was easy to implement) linear-linear graph
+longdesc paper with LaTeX.
docfiles size=23
texmf-dist/doc/latex/logpap/README details="Package Readme"
texmf-dist/doc/latex/logpap/example.pdf details="Package documentation"
@@ -131358,14 +131367,14 @@
longdesc involves running LaTeX several times, running tools such as
longdesc BibTeX or makeindex, and so on. It will log requests like
longdesc "please rerun LaTeX" or "please run BibTeX on file X" to an
-longdesc external XML file which lists all open tasks in a machine-
-longdesc readable format. Compiler scripts and integrated LaTeX editing
-longdesc environments may parse this file to determine the next steps in
-longdesc the workflow in a way that is more efficient than parsing the
-longdesc main log file. In sum, the package will do two things: enable
-longdesc package authors to use LaTeX commands to issue requests,
-longdesc collect all requests from all packages and write them to an
-longdesc external XML file at the end of the document.
+longdesc external XML file which lists all open tasks in a
+longdesc machine-readable format. Compiler scripts and integrated LaTeX
+longdesc editing environments may parse this file to determine the next
+longdesc steps in the workflow in a way that is more efficient than
+longdesc parsing the main log file. In sum, the package will do two
+longdesc things: enable package authors to use LaTeX commands to issue
+longdesc requests, collect all requests from all packages and write them
+longdesc to an external XML file at the end of the document.
docfiles size=12
texmf-dist/doc/latex/logreq/README details="Readme"
texmf-dist/doc/latex/logreq/examples/01-basic.run.xml
@@ -131638,10 +131647,10 @@
category Package
revision 34302
shortdesc Provides a figure-like environment that break over pages
-longdesc The longfigure package uses and relabels components of the well-
-longdesc known longtable package, written by David Carlisle, to provide
-longdesc a table-like environment that can display a stream of figures
-longdesc as a single figure that can break across pages.
+longdesc The longfigure package uses and relabels components of the
+longdesc well-known longtable package, written by David Carlisle, to
+longdesc provide a table-like environment that can display a stream of
+longdesc figures as a single figure that can break across pages.
docfiles size=111
texmf-dist/doc/latex/longfigure/README details="Readme"
texmf-dist/doc/latex/longfigure/longfigure.pdf details="Package documentation"
@@ -131829,8 +131838,9 @@
longdesc macros for typesetting a variant of sequence diagrams, in this
longdesc case the Live Sequence Charts of Damm and Harel. The package
longdesc supports the full LSC language of the original LSC paper, the
-longdesc Klose-extensions for formal verification and some of the Harel-
-longdesc extensions for the Play-In/Play-Out approach (cf. the manual).
+longdesc Klose-extensions for formal verification and some of the
+longdesc Harel-extensions for the Play-In/Play-Out approach (cf. the
+longdesc manual).
docfiles size=73
texmf-dist/doc/latex/lsc/README details="Readme"
texmf-dist/doc/latex/lsc/lsc.pdf details="Package documentation"
@@ -133567,8 +133577,8 @@
shortdesc Replacing inputenc for use in LuaTeX
longdesc LuaTeX operates by default in UTF-8 input; thus LaTeX documents
longdesc that need 8-bit character-sets need special treatment. (In
-longdesc fact, LaTeX documents using UTF-8 with "traditional" -- 256-
-longdesc glyph -- fonts also need support from this package.) The
+longdesc fact, LaTeX documents using UTF-8 with "traditional" --
+longdesc 256-glyph -- fonts also need support from this package.) The
longdesc package, therefore, replaces the LaTeX standard inputenc for
longdesc use under LuaTeX. With a current LuaTeX,the package has the
longdesc same behaviour with LuaTeX as inputenc has under pdfTeX.
@@ -134508,7 +134518,7 @@
name luatex.win32
category TLCore
-revision 44182
+revision 44296
shortdesc win32 files of luatex
binfiles arch=win32 size=3404
bin/win32/dviluatex.exe
@@ -135370,8 +135380,8 @@
longdesc M-Tx is a preprocessor to pmx, which is itself a preprocessor
longdesc to musixtex, a music typesetting system. The prime motivation
longdesc to the development of M-Tx was to provide lyrics for music to
-longdesc be typeset. In fact, pmx now provides a lyrics interface, but M-
-longdesc Tx continues in use by those who prefer its language.
+longdesc be typeset. In fact, pmx now provides a lyrics interface, but
+longdesc M-Tx continues in use by those who prefer its language.
depend m-tx.ARCH
docfiles size=226
texmf-dist/doc/generic/m-tx/Makefile
@@ -139090,8 +139100,8 @@
longdesc The Pazo Math fonts are a family of PostScript fonts suitable
longdesc for typesetting mathematics in combination with the Palatino
longdesc family of text fonts. The Pazo Math family is made up of five
-longdesc fonts provided in Adobe Type 1 format (PazoMath, PazoMath-
-longdesc Italic, PazoMath-Bold, PazoMath-BoldItalic, and
+longdesc fonts provided in Adobe Type 1 format (PazoMath,
+longdesc PazoMath-Italic, PazoMath-Bold, PazoMath-BoldItalic, and
longdesc PazoMathBlackboardBold). These contain, in designs that match
longdesc Palatino, glyphs that are usually not available in Palatino and
longdesc for which Computer Modern looks odd when combined with
@@ -140181,22 +140191,22 @@
category Package
revision 41203
shortdesc Typeset fiction, non-fiction and mathematical books
-longdesc The memoir class is for typesetting poetry, fiction, non-
-longdesc fiction, and mathematical works. Permissible document 'base'
-longdesc font sizes range from 9 to 60pt. There is a range of page-
-longdesc styles and well over a dozen chapter-styles to choose from, as
-longdesc well as methods for specifying your own layouts and designs.
-longdesc The class also provides the functionality of over thirty of the
-longdesc more popular packages, thus simplifying document sources. The
-longdesc class automatically loads an associated patch file mempatch;
-longdesc the patch file may be updated from time to time, between
-longdesc releases of the class itself. (The patch file stays around even
-longdesc when there are no extant patches.) Users who wish to use the
-longdesc hyperref package, in a document written with the memoir class,
-longdesc should also use the memhfixc package (part of this bundle).
-longdesc Note, however, that any current version of hyperref actually
-longdesc loads the package automatically if it detects that it is
-longdesc running under memoir.
+longdesc The memoir class is for typesetting poetry, fiction,
+longdesc non-fiction, and mathematical works. Permissible document
+longdesc 'base' font sizes range from 9 to 60pt. There is a range of
+longdesc page-styles and well over a dozen chapter-styles to choose
+longdesc from, as well as methods for specifying your own layouts and
+longdesc designs. The class also provides the functionality of over
+longdesc thirty of the more popular packages, thus simplifying document
+longdesc sources. The class automatically loads an associated patch file
+longdesc mempatch; the patch file may be updated from time to time,
+longdesc between releases of the class itself. (The patch file stays
+longdesc around even when there are no extant patches.) Users who wish
+longdesc to use the hyperref package, in a document written with the
+longdesc memoir class, should also use the memhfixc package (part of
+longdesc this bundle). Note, however, that any current version of
+longdesc hyperref actually loads the package automatically if it detects
+longdesc that it is running under memoir.
docfiles size=1066
texmf-dist/doc/latex/memoir/Makeidxglo
texmf-dist/doc/latex/memoir/README details="Readme"
@@ -140857,14 +140867,14 @@
category Package
revision 15878
shortdesc Plot-manipulation macros for use in MetaPost
-longdesc MetaPlot is a set of MetaPost macros for manipulating pre-
-longdesc generated plots (and similar objects), and formatting them for
-longdesc inclusion in a MetaPost figure. The intent is that the plots
-longdesc can be generated by some outside program, in an abstract manner
-longdesc that does not require making decisions about on-page sizing and
-longdesc layout, and then they can be imported into MetaPlot and
-longdesc arranged using the full capabilities of MetaPost. Metaplot also
-longdesc includes a very flexible set of macros for generating plot
+longdesc MetaPlot is a set of MetaPost macros for manipulating
+longdesc pre-generated plots (and similar objects), and formatting them
+longdesc for inclusion in a MetaPost figure. The intent is that the
+longdesc plots can be generated by some outside program, in an abstract
+longdesc manner that does not require making decisions about on-page
+longdesc sizing and layout, and then they can be imported into MetaPlot
+longdesc and arranged using the full capabilities of MetaPost. Metaplot
+longdesc also includes a very flexible set of macros for generating plot
longdesc axes, which may be useful in other contexts as well. Presently,
longdesc MetaPlot is in something of a pre-release beta state; it is
longdesc quite functional, but the syntax of the commands is still
@@ -142581,18 +142591,19 @@
category Package
revision 41676
shortdesc High-quality graphics from MGL scripts embedded in LaTeX documents
-longdesc This package allows you to create high-quality publication-
-longdesc ready graphics directly from MGL scripts embedded into your
-longdesc LaTeX document, using the MathGL library. Besides following the
-longdesc LaTeX philosophy of allowing you to concentrate on content
-longdesc rather than output (mglTeX takes care of producing the output),
-longdesc mglTeX facilitates the maintenance of your document, since both
-longdesc code for text and code for plots are contained in a single
-longdesc file. MathGL. is a fast and efficient library by Alexey Balakin
-longdesc for the creation of high-quality publication-ready scientific
-longdesc graphics. Although it defines interfaces for many programming
-longdesc languages, it also implements its own scripting language,
-longdesc called MGL, which can be used independently.
+longdesc This package allows you to create high-quality
+longdesc publication-ready graphics directly from MGL scripts embedded
+longdesc into your LaTeX document, using the MathGL library. Besides
+longdesc following the LaTeX philosophy of allowing you to concentrate
+longdesc on content rather than output (mglTeX takes care of producing
+longdesc the output), mglTeX facilitates the maintenance of your
+longdesc document, since both code for text and code for plots are
+longdesc contained in a single file. MathGL. is a fast and efficient
+longdesc library by Alexey Balakin for the creation of high-quality
+longdesc publication-ready scientific graphics. Although it defines
+longdesc interfaces for many programming languages, it also implements
+longdesc its own scripting language, called MGL, which can be used
+longdesc independently.
docfiles size=521
texmf-dist/doc/latex/mgltex/README details="Readme"
texmf-dist/doc/latex/mgltex/Recompilation_decision.eps
@@ -142726,8 +142737,8 @@
longdesc interword spacing and additional kerning, as well as
longdesc hyphenatable letterspacing (tracking) and the possibility to
longdesc disable all or selected ligatures. These features may be
-longdesc applied to customisable sets of fonts, and all micro-
-longdesc typographic aspects of the fonts can be configured in a
+longdesc applied to customisable sets of fonts, and all
+longdesc micro-typographic aspects of the fonts can be configured in a
longdesc straight-forward and flexible way. Settings for various fonts
longdesc are provided. Note that character protrusion requires pdfTeX,
longdesc LuaTeX, or XeTeX. Font expansion works with pdfTeX or LuaTeX.
@@ -142997,9 +143008,9 @@
longdesc other boxes. (It takes another approach than marginnote by
longdesc Markus Kohm: it saves all \marginpar-commands and typesets them
longdesc outside (i.e., after) the box.) The package defines an
-longdesc environment minipagewithmarginpars (to be used like minipage)--
-longdesc and the internal commands may be used by other packages to
-longdesc define similar environments or commands.
+longdesc environment minipagewithmarginpars (to be used like
+longdesc minipage)--and the internal commands may be used by other
+longdesc packages to define similar environments or commands.
docfiles size=51
texmf-dist/doc/latex/minipage-marginpar/README details="README file"
texmf-dist/doc/latex/minipage-marginpar/minipage-marginpar.pdf details="Package documentation" language="de"
@@ -143393,14 +143404,15 @@
category Package
revision 32165
shortdesc Quote and refer to a manuscript for minor revisions
-longdesc The package supports those who publish articles in peer-
-longdesc reviewed journals. In the final stages of the review process,
-longdesc the authors typically have to provide an additional document
-longdesc (such as a letter to the editors), in which they provide a list
-longdesc of modifications that they made to the manuscript. The package
-longdesc automatically provides line numbers and quotations from the
-longdesc manuscript, for this letter. The package loads the package
-longdesc lineno, so (in effect) shares lineno's incompatibilities.
+longdesc The package supports those who publish articles in
+longdesc peer-reviewed journals. In the final stages of the review
+longdesc process, the authors typically have to provide an additional
+longdesc document (such as a letter to the editors), in which they
+longdesc provide a list of modifications that they made to the
+longdesc manuscript. The package automatically provides line numbers and
+longdesc quotations from the manuscript, for this letter. The package
+longdesc loads the package lineno, so (in effect) shares lineno's
+longdesc incompatibilities.
docfiles size=44
texmf-dist/doc/latex/minorrevision/README details="Readme"
texmf-dist/doc/latex/minorrevision/minorrevision.pdf details="Package documentation"
@@ -150074,11 +150086,11 @@
shortdesc Multimedia inclusion package
longdesc The package provides an interface to embed movies, sounds and
longdesc 3D objects into PDF documents for use with LaTeX as well as
-longdesc pdfLaTeX. The package defines a command \includemovie with PDF-
-longdesc 1.5 compatibility. Option 'autoplay' causes the media clip to
-longdesc be started right after the page has loaded. This is useful for
-longdesc side by side movie clips to be played back synchronously. The
-longdesc package is now superseded by media9
+longdesc pdfLaTeX. The package defines a command \includemovie with
+longdesc PDF-1.5 compatibility. Option 'autoplay' causes the media clip
+longdesc to be started right after the page has loaded. This is useful
+longdesc for side by side movie clips to be played back synchronously.
+longdesc The package is now superseded by media9
docfiles size=196
texmf-dist/doc/latex/movie15/README details="README file"
texmf-dist/doc/latex/movie15/files/3dsystem.fig
@@ -150510,6 +150522,25 @@
binfiles arch=x86_64-solaris size=1
bin/x86_64-solaris/mptopdf
+name mptrees
+category Package
+revision 44297
+shortdesc Probability trees with MetaPost
+longdesc This package provides MetaPost tools for drawing simple
+longdesc probability trees. One command and several parameters to
+longdesc control the output are provided.
+docfiles size=101
+ texmf-dist/doc/metapost/mptrees/README.md details="Readme"
+ texmf-dist/doc/metapost/mptrees/mptrees-doc.pdf details="Package documentation"
+ texmf-dist/doc/metapost/mptrees/mptrees-doc.tex
+runfiles size=3
+ texmf-dist/metapost/mptrees/mptrees.mp
+catalogue-ctan /graphics/metapost/contrib/macros/mptrees
+catalogue-date 2017-05-10 23:01:33 +0200
+catalogue-license lppl1.3
+catalogue-topics diagram-maths maths probability
+catalogue-version 17.05
+
name ms
category Package
revision 42428
@@ -151466,8 +151497,8 @@
shortdesc Fonts used by MusixTeX
longdesc These are fonts for use with MusixTeX; they are provided both
longdesc as original Metafont source, and as converted Adobe Type 1. The
-longdesc bundle renders the older (Type 1 fonts only) bundle musixtex-
-longdesc t1fonts obsolete.
+longdesc bundle renders the older (Type 1 fonts only) bundle
+longdesc musixtex-t1fonts obsolete.
execute addMixedMap musix.map
docfiles size=24
texmf-dist/doc/fonts/musixtex-fonts/CHANGES.psfonts
@@ -151903,12 +151934,13 @@
longdesc \TransformNotes{input}{output} is that notes commands in the
longdesc source will expect their arguments to match the input pattern,
longdesc but the notes will be typeset according to the output pattern.
-longdesc An example is extracting single-instrument parts from a multi-
-longdesc instrument score. fixmsxpart corrects note spacing in a single-
-longdesc part MusiXTeX source (possibly derived from a multi-instrument
-longdesc score and as a result having irregular note spacing). msxlint
-longdesc detects incorrectly formatted notes lines in a MusiXTeX source
-longdesc file. This should be used before using \TransformNotes.
+longdesc An example is extracting single-instrument parts from a
+longdesc multi-instrument score. fixmsxpart corrects note spacing in a
+longdesc single-part MusiXTeX source (possibly derived from a
+longdesc multi-instrument score and as a result having irregular note
+longdesc spacing). msxlint detects incorrectly formatted notes lines in
+longdesc a MusiXTeX source file. This should be used before using
+longdesc \TransformNotes.
depend musixtex
depend musixtnt.ARCH
docfiles size=36
@@ -154313,10 +154345,10 @@
longdesc The bundle provides a package that implements both author-year
longdesc and numbered references, as well as much detailed of support
longdesc for other bibliography use. Also Provided are versions of the
-longdesc standard BibTeX styles that are compatible with natbib--
-longdesc plainnat, unsrtnat, abbrnat. The bibliography styles produced
-longdesc by custom-bib are designed from the start to be compatible with
-longdesc natbib.
+longdesc standard BibTeX styles that are compatible with
+longdesc natbib--plainnat, unsrtnat, abbrnat. The bibliography styles
+longdesc produced by custom-bib are designed from the start to be
+longdesc compatible with natbib.
docfiles size=123
texmf-dist/doc/latex/natbib/README.1st
texmf-dist/doc/latex/natbib/README.v831b details="Readme for this release" language="en"
@@ -154412,11 +154444,11 @@
longdesc Navigator implements PDF features for all formats (with some
longdesc limitations in ConTeXt) with pdfTeX, LuaTeX and XeTeX (i.e.
longdesc xdvipdfmx). Features include: Customizable outlines (i.e.
-longdesc bookmarks); Anchors; Links and actions (e.g. JavaScript or user-
-longdesc defined PDF actions); File embedding (not in ConTeXt); Document
-longdesc information and PDF viewer's display (not in ConTeXt); and
-longdesc Commands to create and use raw PDF objects. Navigator requires
-longdesc texapi and yax, both version at least 1.03.
+longdesc bookmarks); Anchors; Links and actions (e.g. JavaScript or
+longdesc user-defined PDF actions); File embedding (not in ConTeXt);
+longdesc Document information and PDF viewer's display (not in ConTeXt);
+longdesc and Commands to create and use raw PDF objects. Navigator
+longdesc requires texapi and yax, both version at least 1.03.
docfiles size=42
texmf-dist/doc/generic/navigator/README details="Readme"
texmf-dist/doc/generic/navigator/navigator-doc.pdf details="Package documentation"
@@ -154527,10 +154559,10 @@
longdesc "styles", mini floats, side floats; manually marked footnotes;
longdesc extension of amsmath; control of paragraph skip; an envelope to
longdesc the graphicx package; dashed and multiple rules; alternative
-longdesc techniques for declarations of sections, captions, and toc-
-longdesc entries; generalised text-stretching; generation of new theorem-
-longdesc like environments; control of the text area; centred page
-longdesc layouts; and un-numbered top-level section.
+longdesc techniques for declarations of sections, captions, and
+longdesc toc-entries; generalised text-stretching; generation of new
+longdesc theorem-like environments; control of the text area; centred
+longdesc page layouts; and un-numbered top-level section.
docfiles size=729
texmf-dist/doc/latex/ncctools/README details="Readme"
texmf-dist/doc/latex/ncctools/README.source
@@ -155451,8 +155483,8 @@
longdesc letter for the existing math italic and Greek glyphs, making a
longdesc mathematics package that matches Libertine text quite well.
longdesc newtxmath can also use the maths italic font provided with the
-longdesc garamondx package, thus offering a garamond-alike text-with-
-longdesc maths combination.
+longdesc garamondx package, thus offering a garamond-alike
+longdesc text-with-maths combination.
depend kastrup
execute addMap newtx.map
docfiles size=234
@@ -156307,8 +156339,9 @@
longdesc meaning of Unicode characters. The document should be processed
longdesc by (pdf)LaTeX with the unicode option of inputenc or inputenx,
longdesc or by XeLaTeX/LuaLaTeX. The command provided is
-longdesc \newunicodechar{<char>}{<code>} where <char> is a directly-
-longdesc typed Unicode character, and <code> is its replacement.
+longdesc \newunicodechar{<char>}{<code>} where <char> is a
+longdesc directly-typed Unicode character, and <code> is its
+longdesc replacement.
docfiles size=96
texmf-dist/doc/latex/newunicodechar/README details="Readme"
texmf-dist/doc/latex/newunicodechar/newunicodechar.pdf details="Package documentation"
@@ -156583,12 +156616,13 @@
revision 39460
shortdesc A class for NIH biosketches based on the 2015 updated format
longdesc This LaTeX document class tries to adhere to the Biographical
-longdesc Sketch formatting requirements outlined in NIH Notice [NOT-OD-
-longdesc 15-032] (http://grants.nih.gov/grants/guide/notice-files/NOT-OD-
-longdesc 15-032.html). This new format is required for applications
-longdesc submitted for due dates on or after May 25, 2015. The package
-longdesc tries to mimic the example documents provided on the [SF 424
-longdesc (R&R) Forms and Applications page]
+longdesc Sketch formatting requirements outlined in NIH Notice
+longdesc [NOT-OD-15-032]
+longdesc (http://grants.nih.gov/grants/guide/notice-files/NOT-OD-15-032.
+longdesc html). This new format is required for applications submitted
+longdesc for due dates on or after May 25, 2015. The package tries to
+longdesc mimic the example documents provided on the [SF 424 (R&R) Forms
+longdesc and Applications page]
longdesc (http://grants.nih.gov/grants/funding/424/index.htm#format) as
longdesc closely as possible. The author has used this class for his own
longdesc grant submissions; however he offers no guarantee of conformity
@@ -157643,10 +157677,10 @@
shortdesc Prevent trouble from citations in table of contents, etc
longdesc If you have \cite commands in \section-like commands, or in
longdesc \caption, the citation will also appear in the table of
-longdesc contents, or list of whatever. If you are also using an unsrt-
-longdesc like bibliography style, these citations will come at the very
-longdesc start of the bibliography, which is confusing. This package
-longdesc suppresses the effect.
+longdesc contents, or list of whatever. If you are also using an
+longdesc unsrt-like bibliography style, these citations will come at the
+longdesc very start of the bibliography, which is confusing. This
+longdesc package suppresses the effect.
docfiles size=58
texmf-dist/doc/latex/notoccite/notoccite.pdf details="Package documentation"
texmf-dist/doc/latex/notoccite/notoccite.tex
@@ -157663,9 +157697,9 @@
shortdesc Class for printing fiction, such as novels
longdesc The novel class uses only LuaLaTeX. It is designed for authors
longdesc of original fiction, to be printed as a paper book,
-longdesc particularly for the commercial print-on-demand market. Built-
-longdesc in PDF/X is available, using new technology. The package is
-longdesc well suited for detective novels, science fiction, and short
+longdesc particularly for the commercial print-on-demand market.
+longdesc Built-in PDF/X is available, using new technology. The package
+longdesc is well suited for detective novels, science fiction, and short
longdesc stories. But it is not recommended for creating color picture
longdesc books or dissertations.
docfiles size=883
@@ -157865,8 +157899,8 @@
shortdesc Class for the NRC technical journals
longdesc Macros, and some documentation, for typesetting papers for
longdesc submission to journals published by the National Research
-longdesc Council Research Press. At present, only nrc2.cls (for two-
-longdesc column layout) should be used.
+longdesc Council Research Press. At present, only nrc2.cls (for
+longdesc two-column layout) should be used.
docfiles size=75
texmf-dist/doc/latex/nrc/00-2013-feb-authors.txt details="Notes for authors"
texmf-dist/doc/latex/nrc/README details="Readme"
@@ -157946,9 +157980,9 @@
longdesc The package offers enhancements for theorem-like environments:
longdesc easier control of layout; proper placement of endmarks even
longdesc when the environment ends with \end{enumerate} or
-longdesc \end{displaymath} (including support for amsmath displayed-
-longdesc equation environments); and support for making a list of
-longdesc theorems, analagous to \listoffigures.
+longdesc \end{displaymath} (including support for amsmath
+longdesc displayed-equation environments); and support for making a list
+longdesc of theorems, analagous to \listoffigures.
docfiles size=118
texmf-dist/doc/latex/ntheorem/README details="Readme"
texmf-dist/doc/latex/ntheorem/ntheorem.pdf details="Package documentation (English)" language="en"
@@ -159987,11 +160021,11 @@
longdesc This is a collection with various single-file plain TeX macros
longdesc written by Petr Olsak. The documentation is included in each
longdesc file separately. booklet.tex: re-orders PDF pages and collects
-longdesc them for booklet printing cnv.tex: conversion of texts cnv-
-longdesc pu.tex: example of usage of cnv.tex --- pdf outlines in Unicode
-longdesc cnv-word.tex: example of usage of cnv.tex --- word to word
-longdesc conversion eparam.tex: Full expansion during parameter scanning
-longdesc fun-coffee.tex: generates splotches in the document
+longdesc them for booklet printing cnv.tex: conversion of texts
+longdesc cnv-pu.tex: example of usage of cnv.tex --- pdf outlines in
+longdesc Unicode cnv-word.tex: example of usage of cnv.tex --- word to
+longdesc word conversion eparam.tex: Full expansion during parameter
+longdesc scanning fun-coffee.tex: generates splotches in the document
longdesc openclose.tex: repairs balanced text between \Open ...\Close
longdesc pair qrcode.tex: QR code generated at TeX level scanbase.tex:
longdesc parser of text-style mysql outputs scancsv.tex: parser of CSV
@@ -161897,11 +161931,11 @@
category Package
revision 35095
shortdesc Optimality Theory tableaux in LaTeX
-longdesc The package makes it easy to create beautiful optimality-
-longdesc theoretic tableaux. The LaTeX source is visually very similar
-longdesc to a formatted tableau, which makes working with the source
-longdesc code painless (well, less painful). A variety of stylistic
-longdesc variants are available to suit personal taste.
+longdesc The package makes it easy to create beautiful
+longdesc optimality-theoretic tableaux. The LaTeX source is visually
+longdesc very similar to a formatted tableau, which makes working with
+longdesc the source code painless (well, less painful). A variety of
+longdesc stylistic variants are available to suit personal taste.
docfiles size=19
texmf-dist/doc/latex/ot-tableau/README details="Readme"
texmf-dist/doc/latex/ot-tableau/ot-tableau.pdf details="Package documentation"
@@ -162119,8 +162153,8 @@
shortdesc Incremental slides
longdesc The overlay package allows to write presentations with
longdesc incremental slides. It does not presuppose any specific
-longdesc document class. Rather, it is a lightweight alternative to full-
-longdesc fledged presentation classes like beamer.
+longdesc document class. Rather, it is a lightweight alternative to
+longdesc full-fledged presentation classes like beamer.
docfiles size=36
texmf-dist/doc/latex/overlays/COPYING
texmf-dist/doc/latex/overlays/ChangeLog
@@ -162747,8 +162781,8 @@
category Package
revision 15878
shortdesc Origami-style folding paper CD case
-longdesc This package implements a LaTeX style file to produce origami-
-longdesc style folding paper CD cases.
+longdesc This package implements a LaTeX style file to produce
+longdesc origami-style folding paper CD cases.
docfiles size=39
texmf-dist/doc/latex/papercdcase/example.tex
texmf-dist/doc/latex/papercdcase/interactive.tex
@@ -163817,8 +163851,8 @@
revision 19963
shortdesc Layout with zero \parindent, non-zero \parskip
longdesc Simply changing \parskip and \parindent leaves a layout that is
-longdesc untidy; this package (though it is no substitute for a properly-
-longdesc designed class) helps alleviate this untidiness.
+longdesc untidy; this package (though it is no substitute for a
+longdesc properly-designed class) helps alleviate this untidiness.
docfiles size=44
texmf-dist/doc/latex/parskip/parskip-doc.pdf details="Package documentation"
texmf-dist/doc/latex/parskip/parskip-doc.tex
@@ -166273,10 +166307,10 @@
longdesc extensive facilities offered by the powerful PSTricks package
longdesc can be made use of in a pdfTeX document. This is done using the
longdesc shell escape function available in current TeX implementations.
-longdesc The package may also be used in support of other 'PostScript-
-longdesc output-only' packages, such as PSfrag. For alternatives, users
-longdesc may care to review the discussion in the PSTricks online
-longdesc documentation.
+longdesc The package may also be used in support of other
+longdesc 'PostScript-output-only' packages, such as PSfrag. For
+longdesc alternatives, users may care to review the discussion in the
+longdesc PSTricks online documentation.
docfiles size=107
texmf-dist/doc/latex/pdftricks/makefile
texmf-dist/doc/latex/pdftricks/manual.pdf details="Package documentation"
@@ -166820,9 +166854,10 @@
longdesc Perl's programmability. PerlTeX will make use of persistent
longdesc named pipes, and thereby run more efficiently, on operating
longdesc systems that offer them (mostly Unix-like systems). Also
-longdesc provided is a switch to generate a PerlTeX-free, document-
-longdesc specific, noperltex.sty that is useful when distributing a
-longdesc document to places where PerlTeX is not available.
+longdesc provided is a switch to generate a PerlTeX-free,
+longdesc document-specific, noperltex.sty that is useful when
+longdesc distributing a document to places where PerlTeX is not
+longdesc available.
depend perltex.ARCH
docfiles size=90
texmf-dist/doc/latex/perltex/README details="Readme"
@@ -168363,9 +168398,9 @@
category Package
revision 34573
shortdesc LaTeX package options with pgfkeys
-longdesc The pgfkeys package (part of the pgf distribution) is a well-
-longdesc designed way of defining and using large numbers of keys for
-longdesc key-value syntaxes. However, pgfkeys itself does not offer
+longdesc The pgfkeys package (part of the pgf distribution) is a
+longdesc well-designed way of defining and using large numbers of keys
+longdesc for key-value syntaxes. However, pgfkeys itself does not offer
longdesc means of handling LaTeX class and package options. This package
longdesc adds such option handling to pgfkeys, in the same way that
longdesc kvoptions adds the same facility to the LaTeX standard keyval
@@ -168871,8 +168906,9 @@
longdesc (kets, bras, brakets, matrix elements etc. which can be sized
longdesc as required), delimited expressions such as averages and norms,
longdesc and some basic Lie algebra/group names. Macros for entropy
-longdesc measures for quantum information theory (smooth min- and max-
-longdesc entropy, smooth relative entropies, etc.) are also provided.
+longdesc measures for quantum information theory (smooth min- and
+longdesc max-entropy, smooth relative entropies, etc.) are also
+longdesc provided.
docfiles size=87
texmf-dist/doc/latex/phfqit/Makefile
texmf-dist/doc/latex/phfqit/README.md details="Readme"
@@ -171269,8 +171305,8 @@
revision 30353
shortdesc 'Lorem ipsum' for Plain TeX developers
longdesc The package provides a paragraph generator designed for use in
-longdesc Plain TeX documents. The paragraphs generated contain many 'f-
-longdesc groups' (ff, fl etc.) so the text can act as a test of the
+longdesc Plain TeX documents. The paragraphs generated contain many
+longdesc 'f-groups' (ff, fl etc.) so the text can act as a test of the
longdesc ligatures of the font in use.
docfiles size=101
texmf-dist/doc/plain/plipsum/README details="Readme"
@@ -171353,8 +171389,8 @@
longdesc Instead of having to transform the common source into program
longdesc or documentation, the central idea was to develop a method to
longdesc have one common source which can be interpreted by a Prolog
-longdesc system as well as by LaTeX, whether that Prolog system be C-
-longdesc Prolog, Quintus-Prolog, or ECLiPSe.
+longdesc system as well as by LaTeX, whether that Prolog system be
+longdesc C-Prolog, Quintus-Prolog, or ECLiPSe.
docfiles size=34
texmf-dist/doc/latex/plweb/README details="Readme"
texmf-dist/doc/latex/plweb/pl.pdf details="Package documentation"
@@ -171402,9 +171438,9 @@
longdesc input file based on a .pmx input file in a much simpler
longdesc language, making most of the layout decisions by itself. It has
longdesc most of MusiXTeX's functionality, but it also permits in-line
-longdesc TeX to give access to virtually all of MusiXTeX. For proof-
-longdesc listening, pmxab will make a MIDI file of your score. scor2prt
-longdesc is an auxiliary program that makes parts from a score.
+longdesc TeX to give access to virtually all of MusiXTeX. For
+longdesc proof-listening, pmxab will make a MIDI file of your score.
+longdesc scor2prt is an auxiliary program that makes parts from a score.
depend pmx.ARCH
docfiles size=225
texmf-dist/doc/generic/pmx/README details="Readme"
@@ -173293,8 +173329,8 @@
revision 43949
shortdesc Examples from the book Presentationen mit LaTeX
longdesc This bundle contains all the examples, as source, eps and pdf,
-longdesc of the author's book "Presentationen mit LaTeX", from the Dante-
-longdesc Edition series.
+longdesc of the author's book "Presentationen mit LaTeX", from the
+longdesc Dante-Edition series.
docfiles size=2456
texmf-dist/doc/latex/presentations/01-01-1.ltx2crop
texmf-dist/doc/latex/presentations/01-01-2.ltx2ps
@@ -173582,8 +173618,8 @@
revision 29803
shortdesc Examples from the book Presentations with LaTeX
longdesc This bundle contains all the examples, as source, eps and pdf,
-longdesc of the author's book "Presentations with LaTeX", from the Dante-
-longdesc Edition series, Published by Lehmanns Media.
+longdesc of the author's book "Presentations with LaTeX", from the
+longdesc Dante-Edition series, Published by Lehmanns Media.
docfiles size=542
texmf-dist/doc/latex/presentations-en/01-01-1.ltx2crop
texmf-dist/doc/latex/presentations-en/01-01-2.ltx2ps
@@ -175067,9 +175103,9 @@
category Package
revision 33946
shortdesc Font support for common PostScript fonts
-longdesc Font definition files, macros and font metrics for freely-
-longdesc available Adobe Type 1 fonts. The font set consists of the
-longdesc 'LaserWriter 35' set (originally 'freely available' because
+longdesc Font definition files, macros and font metrics for
+longdesc freely-available Adobe Type 1 fonts. The font set consists of
+longdesc the 'LaserWriter 35' set (originally 'freely available' because
longdesc embedded in PostScript printers), and a variety of other free
longdesc fonts, together with some additions. Note that while many of
longdesc the fonts are available in PostScript (and other) printers,
@@ -175774,8 +175810,8 @@
revision 41901
shortdesc PSTricks package for drawing electric circuits
longdesc The package is built using PSTricks and in particular pst-node.
-longdesc It can easily draw current 2-terminal devices and some 3- and 4-
-longdesc terminal devices used in electronic or electric theory. The
+longdesc It can easily draw current 2-terminal devices and some 3- and
+longdesc 4-terminal devices used in electronic or electric theory. The
longdesc package's macros are designed with a view to 'logical'
longdesc representation of circuits, as far as possible, so as to
longdesc relieve the user of purely graphical considerations when
@@ -175831,12 +175867,12 @@
longdesc completely described by Coxeter in his book "Regular Complex
longdesc Polytopes". There exist only a finite numbers of exceptional
longdesc regular complex polytopes (for example the icosahedron) and
-longdesc some infinite series (for example, one can construct a multi-
-longdesc dimensional analogue of the hypercube in any finite dimension).
-longdesc The library contains two packages. The first, pst-coxcoor, is
-longdesc devoted to the exceptional complex regular polytopes whose
-longdesc coordinates have been pre-computed. The second, pst-coxeterp,
-longdesc is devoted to the infinite series.
+longdesc some infinite series (for example, one can construct a
+longdesc multi-dimensional analogue of the hypercube in any finite
+longdesc dimension). The library contains two packages. The first,
+longdesc pst-coxcoor, is devoted to the exceptional complex regular
+longdesc polytopes whose coordinates have been pre-computed. The second,
+longdesc pst-coxeterp, is devoted to the infinite series.
docfiles size=312
texmf-dist/doc/generic/pst-cox/README details="Readme"
texmf-dist/doc/generic/pst-cox/gpl.txt
@@ -176275,16 +176311,16 @@
shortdesc PSTricks package for plotting mathematical functions
longdesc The package is built for use with PSTricks. It provides macros
longdesc for plotting and manipulating various mathematical functions:
-longdesc polynomials and their derivatives f(x)=an*x^n+an-1*x^(n-
-longdesc 1)+...+a0 defined by the coefficients a0 a1 a2 ... and the
-longdesc derivative order; the Fourier sum f(x) = a0/2+a1cos(omega
-longdesc x)+...+b1sin(omega x)+... defined by the coefficients a0 a1 a2
-longdesc ... b1 b2 b3 ...; the Bessel function defined by its order; the
-longdesc Gauss function defined by sigma and mu; Bezier curves from
-longdesc order 1 (two control points) to order 9 (10 control points);
-longdesc the superellipse function (the Lame curve); Chebyshev
-longdesc polynomials of the first and second kind; the Thomae (or
-longdesc popcorn) function; the Weierstrass function; various
+longdesc polynomials and their derivatives
+longdesc f(x)=an*x^n+an-1*x^(n-1)+...+a0 defined by the coefficients a0
+longdesc a1 a2 ... and the derivative order; the Fourier sum f(x) =
+longdesc a0/2+a1cos(omega x)+...+b1sin(omega x)+... defined by the
+longdesc coefficients a0 a1 a2 ... b1 b2 b3 ...; the Bessel function
+longdesc defined by its order; the Gauss function defined by sigma and
+longdesc mu; Bezier curves from order 1 (two control points) to order 9
+longdesc (10 control points); the superellipse function (the Lame
+longdesc curve); Chebyshev polynomials of the first and second kind; the
+longdesc Thomae (or popcorn) function; the Weierstrass function; various
longdesc integration-derived functions; normal, binomial, poisson,
longdesc gamma, chi-squared, student's t, F, beta, Cauchy and Weibull
longdesc distribution functions and the Lorenz curve; the zeroes of a
@@ -176529,10 +176565,10 @@
shortdesc Using PSTricks plotting capacities with infix expressions rather than RPN
longdesc Plotting functions with pst-plot is very powerful but sometimes
longdesc difficult to learn since the syntax of \psplot and
-longdesc \parametricplot requires some PostScript knowledge. The infix-
-longdesc RPN and pst-infixplot styles simplify the usage of pst-plot for
-longdesc the beginner, providing macro commands that convert natural
-longdesc mathematical expressions to PostScript syntax.
+longdesc \parametricplot requires some PostScript knowledge. The
+longdesc infix-RPN and pst-infixplot styles simplify the usage of
+longdesc pst-plot for the beginner, providing macro commands that
+longdesc convert natural mathematical expressions to PostScript syntax.
docfiles size=84
texmf-dist/doc/generic/pst-infixplot/README details="Readme"
texmf-dist/doc/generic/pst-infixplot/pst-infixplot-doc.ps
@@ -176655,10 +176691,11 @@
category Package
revision 29803
shortdesc Page layout macros based on PSTricks packages
-longdesc The package provides a means of creating elaborate ("pseudo-
-longdesc tabular") layouts of material, typically to be overlaid on an
-longdesc included graphic. The package requires a recent version of the
-longdesc package pst-node and some other pstricks-related material.
+longdesc The package provides a means of creating elaborate
+longdesc ("pseudo-tabular") layouts of material, typically to be
+longdesc overlaid on an included graphic. The package requires a recent
+longdesc version of the package pst-node and some other pstricks-related
+longdesc material.
docfiles size=29
texmf-dist/doc/latex/pst-layout/README details="Readme"
texmf-dist/doc/latex/pst-layout/pst-layout-doc.pdf details="Package documentation"
@@ -178269,9 +178306,9 @@
revision 44166
catalogue ps2eps
shortdesc Produce Encapsulated PostScript from PostScript
-longdesc Produce Encapsulated PostScript Files (EPS/EPSF) from a one-
-longdesc page PostScript document, or any PostScript document. A correct
-longdesc Bounding Box is calculated for the EPS files and some
+longdesc Produce Encapsulated PostScript Files (EPS/EPSF) from a
+longdesc one-page PostScript document, or any PostScript document. A
+longdesc correct Bounding Box is calculated for the EPS files and some
longdesc PostScript command sequences that can produce errorneous
longdesc results on printers are filtered. The input is cropped to
longdesc include just the image contained in the PostScript file. The
@@ -179101,8 +179138,8 @@
shortdesc A TeX system for publishing in Japanese
longdesc PTeX adds features related to vertical writing, and deals with
longdesc other problems in typesetting Japanese. A set of additions to a
-longdesc TEXMF tree, for use with PTeX, may be found in package PTeX-
-longdesc texmf. PTeX is distributed as WEB change files.
+longdesc TEXMF tree, for use with PTeX, may be found in package
+longdesc PTeX-texmf. PTeX is distributed as WEB change files.
depend ptex-base
depend ptex-fonts
depend cm
@@ -180308,8 +180345,8 @@
longdesc designs of the 1970s, and came up with this font! The fonts are
longdesc distributed as Metafont source. The package offers LaTeX
longdesc support by Rohit Grover, from an original by Sebastian Rahtz,
-longdesc which is slightly odd in claiming that the fonts are T1-
-longdesc encoded. A (possibly) more rational support package is to be
+longdesc which is slightly odd in claiming that the fonts are
+longdesc T1-encoded. A (possibly) more rational support package is to be
longdesc found in punk-latex
docfiles size=2
texmf-dist/doc/fonts/punk/punk.sty
@@ -183010,8 +183047,8 @@
longdesc detailed information. You can also configure the rcs package
longdesc easily to do special things for any keyword. This bundle comes
longdesc with a user manual, an internal interface description, full
-longdesc documentation of the implementation, style information for AUC-
-longdesc TeX, and test cases.
+longdesc documentation of the implementation, style information for
+longdesc AUC-TeX, and test cases.
docfiles size=52
texmf-dist/doc/latex/rcs/CATALOG
texmf-dist/doc/latex/rcs/History
@@ -183761,7 +183798,7 @@
name repere
category Package
-revision 42293
+revision 44298
shortdesc Diagrams for school mathematics
longdesc This package provides MetaPost macros for drawing secondary
longdesc school mathematics figures in a coordinate system: axis, grids
@@ -183768,11 +183805,11 @@
longdesc points, vectors functions (curves, tangents, integrals,
longdesc sequences) statistic diagrams plane geometry (polygons,
longdesc circles)
-docfiles size=175
+docfiles size=179
texmf-dist/doc/metapost/repere/README.md details="Readme"
texmf-dist/doc/metapost/repere/repere-doc.pdf details="Package documentation (French)" language="fr"
texmf-dist/doc/metapost/repere/repere-doc.tex
-runfiles size=15
+runfiles size=17
texmf-dist/metapost/repere/repere.mp
catalogue-ctan /graphics/metapost/contrib/macros/repere
catalogue-date 2017-05-10 22:32:48 +0200
@@ -184132,12 +184169,13 @@
longdesc The package lets you change page layout parameters in small
longdesc steps over a range of values using options. It can set
longdesc \textwidth appropriately for the main fount, and ensure that
-longdesc the text fits inside the printable area of a printer. An rmpage-
-longdesc formatted document can be typeset identically without rmpage
-longdesc after a single cut and paste operation. Local configuration can
-longdesc set defaults: for all documents; and by class, by printer, and
-longdesc by paper size. The geometry package is better if you want to
-longdesc set page layout parameters to particular measurements.
+longdesc the text fits inside the printable area of a printer. An
+longdesc rmpage-formatted document can be typeset identically without
+longdesc rmpage after a single cut and paste operation. Local
+longdesc configuration can set defaults: for all documents; and by
+longdesc class, by printer, and by paper size. The geometry package is
+longdesc better if you want to set page layout parameters to particular
+longdesc measurements.
docfiles size=194
texmf-dist/doc/latex/rmpage/readme details="Readme"
texmf-dist/doc/latex/rmpage/rmpage-doc.pdf details="Package documentation"
@@ -186753,12 +186791,12 @@
shortdesc Increase the number of available output streams in LaTeX
longdesc The package addresses, for LaTeX documents, the severe
longdesc limitation on the number of output streams that TeX provides.
-longdesc The package uses a single TeX output stream, and writes "marked-
-longdesc up" output to this stream. The user may then post-process the
-longdesc marked-up output file, using LaTeX, and the document's output
-longdesc appears as separate files, according to the calls made to the
-longdesc package. The output to be post-processed uses macros from the
-longdesc widely-available ProTeX package.
+longdesc The package uses a single TeX output stream, and writes
+longdesc "marked-up" output to this stream. The user may then
+longdesc post-process the marked-up output file, using LaTeX, and the
+longdesc document's output appears as separate files, according to the
+longdesc calls made to the package. The output to be post-processed uses
+longdesc macros from the widely-available ProTeX package.
docfiles size=26
texmf-dist/doc/latex/rvwrite/Makefile
texmf-dist/doc/latex/rvwrite/README details="Readme"
@@ -187585,8 +187623,8 @@
category Package
revision 15878
shortdesc A bundle of utilities by Jonathan Sauer
-longdesc The bundle consists of: a tool for collecting text for later re-
-longdesc use, a tool for typesetting the "meta-information" within a
+longdesc The bundle consists of: a tool for collecting text for later
+longdesc re-use, a tool for typesetting the "meta-information" within a
longdesc text, a tool for use in constructing macros with multiple
longdesc optional parameters, a package for multiple column parallel
longdesc texts, a tool for processing key-value structured lists, and
@@ -188264,11 +188302,11 @@
longdesc school subject. An extension for physics is currently in
longdesc progress. Extensions for other subjects are welcome. For the
longdesc time being, the whole package splits up into individual
-longdesc packages for informatics (including syntax diagrams, Nassi-
-longdesc Shneiderman diagrams, sequence diagrams, object diagrams, and
-longdesc class diagrams) as well as classes for written exams (tests,
-longdesc quizzes, teaching observations, information sheets, worksheets,
-longdesc and answer keys).
+longdesc packages for informatics (including syntax diagrams,
+longdesc Nassi-Shneiderman diagrams, sequence diagrams, object diagrams,
+longdesc and class diagrams) as well as classes for written exams
+longdesc (tests, quizzes, teaching observations, information sheets,
+longdesc worksheets, and answer keys).
docfiles size=807
texmf-dist/doc/latex/schule/README details="Readme"
texmf-dist/doc/latex/schule/README_DE details="Readme (German)" language="de"
@@ -188553,11 +188591,11 @@
longdesc pasting most of an article to a poster without any editing
longdesc (save reducing the size) -- see the manual. Sciposter does work
longdesc for LaTeX, not just pdfLaTeX. However, xdvi produces strange
-longdesc results, though a recent version of dvips does create good ps-
-longdesc files from the dvi files. Also note that logos must either be
-longdesc put in the current working directory or in the directories of
-longdesc your LaTeX distribution. For some reason graphicspath settings
-longdesc are ignored.
+longdesc results, though a recent version of dvips does create good
+longdesc ps-files from the dvi files. Also note that logos must either
+longdesc be put in the current working directory or in the directories
+longdesc of your LaTeX distribution. For some reason graphicspath
+longdesc settings are ignored.
docfiles size=176
texmf-dist/doc/latex/sciposter/README details="Readme"
texmf-dist/doc/latex/sciposter/sciposterexample/auto/sciposter-example.el
@@ -188923,8 +188961,8 @@
longdesc a new DVI file; dvitodvi, which will rearrange the pages of a
longdesc DVI file to create a new file; and libtex, a library for
longdesc manipulating the files, from the old SeeTeX project. The
-longdesc utilities are provided as C source with Imakefiles, and an MS-
-longdesc DOS version of dvibook is also provided.
+longdesc utilities are provided as C source with Imakefiles, and an
+longdesc MS-DOS version of dvibook is also provided.
depend seetexk.ARCH
docfiles size=14
texmf-dist/doc/man/man1/dvibook.1
@@ -194059,8 +194097,9 @@
longdesc This package provides Source Serif Pro for LaTeX. It includes
longdesc both Type1 and OpenType fonts and selects the latter when using
longdesc XeLaTeX or LuaLaTeX. Issues with this package can be reported
-longdesc on GitHub (https://github.com/silkeh/latex-
-longdesc sourceserifpro/issues) or emailed to tex at slxh.nl.
+longdesc on GitHub
+longdesc (https://github.com/silkeh/latex-sourceserifpro/issues) or
+longdesc emailed to tex at slxh.nl.
execute addMap SourceSerifPro.map
docfiles size=35
texmf-dist/doc/latex/sourceserifpro/LICENSE.txt
@@ -194808,8 +194847,8 @@
longdesc number of keystrokes needed to typeset small amounts of aligned
longdesc material (matrices, arrays, etc.). It provides a facility for
longdesc typing alignment environments and macros with spaces as the
-longdesc alignment delimiter and semicolons (by default) as the end-of-
-longdesc row indicator. For instance, typeset a matrix using
+longdesc alignment delimiter and semicolons (by default) as the
+longdesc end-of-row indicator. For instance, typeset a matrix using
longdesc \spalignmat{1 12 -3; 24 -2 2; 0 0 1}, or a vector using
longdesc \spalignvector{22 \frac{1}{2} -14}. This package also contains
longdesc utility macros for typesetting augmented matrices, vectors,
@@ -195720,9 +195759,9 @@
category Package
revision 19982
shortdesc The StarFont Sans astrological font
-longdesc The package contains StarFontSans and StarFontSerif, two public-
-longdesc domain astrological fonts designed by Anthony I.P. Owen, and
-longdesc the appropriate macros to use them with TeX and LaTeX. The
+longdesc The package contains StarFontSans and StarFontSerif, two
+longdesc public-domain astrological fonts designed by Anthony I.P. Owen,
+longdesc and the appropriate macros to use them with TeX and LaTeX. The
longdesc fonts are supplied both in the original TrueType Format and in
longdesc Adobe Type 1 format.
execute addMap starfont.map
@@ -196546,8 +196585,8 @@
category Package
revision 25916
shortdesc Draw Nassi-Schneidermann charts
-longdesc Even in the age of OOP one must develop algorithms. Nassi-
-longdesc Shneiderman diagrams are a well known tool to describe an
+longdesc Even in the age of OOP one must develop algorithms.
+longdesc Nassi-Shneiderman diagrams are a well known tool to describe an
longdesc algorithm in a graphical way. The package offers some macros
longdesc for generating those diagrams in a LaTeX document. The package
longdesc provides the most important elements of a Nassi-Shneiderman
@@ -196997,8 +197036,8 @@
shortdesc Automates layout when using the subfigure package
longdesc Defines an array/matrix-type environment that is used with the
longdesc subfigure package to automate the placement of subfigures (or
-longdesc tables or text). The subfigures are placed left-to-right, top-
-longdesc to-bottom.
+longdesc tables or text). The subfigures are placed left-to-right,
+longdesc top-to-bottom.
docfiles size=72
texmf-dist/doc/latex/subfigmat/subfigmat-doc.pdf details="Package documentation"
texmf-dist/doc/latex/subfigmat/subfigmat-doc.tex
@@ -197230,8 +197269,8 @@
longdesc to find a solution to the puzzle in the file named in the
longdesc argument; and createsudoku, which uses the random package to
longdesc generate a puzzle according to a bunch of parameters that the
-longdesc user sets via macros. The bundle comes with a set of ready-
-longdesc prepared puzzle files.
+longdesc user sets via macros. The bundle comes with a set of
+longdesc ready-prepared puzzle files.
docfiles size=97
texmf-dist/doc/latex/sudokubundle/README details="Readme"
texmf-dist/doc/latex/sudokubundle/somesudoku.tex
@@ -198141,9 +198180,9 @@
longdesc A collection of simple programs for manipulating Adobe Type 1
longdesc fonts, comprising: - t1ascii: convert PFB (binary) to PFA
longdesc (ascii) fonts; - t1binary: convert PFA to PFB fonts; -
-longdesc t1disasm: convert PFA or PFB fonts to human-readable and -
-longdesc editable format; - t1asm: reassemble such editable formats to a
-longdesc font; - t1unmac: extract font resources from a Macintosh font
+longdesc t1disasm: convert PFA or PFB fonts to human-readable and
+longdesc -editable format; - t1asm: reassemble such editable formats to
+longdesc a font; - t1unmac: extract font resources from a Macintosh font
longdesc file; and - t1mac: generate a Macintosh font from a Type 1
longdesc font.
depend t1utils.ARCH
@@ -198401,9 +198440,9 @@
longdesc for using Cyrillic characters in LaTeX: - the mathtext package,
longdesc for using Cyrillic letters 'transparently' in formulae - the
longdesc citehack package, for using Cyrillic (or indeed any non-ascii)
-longdesc characters in citation keys; - support for Cyrillic in BibTeX; -
-longdesc support for Cyrillic in Makeindex; and - various items of font
-longdesc support.
+longdesc characters in citation keys; - support for Cyrillic in BibTeX;
+longdesc - support for Cyrillic in Makeindex; and - various items of
+longdesc font support.
docfiles size=66
texmf-dist/doc/generic/t2/Makefile
texmf-dist/doc/generic/t2/OT2uni.map
@@ -202019,10 +202058,10 @@
longdesc fonts of the TeX-Gyre collection. The collection is available
longdesc in OpenType format, only; fonts conform to the developing
longdesc standards for OpenType maths fonts. TeX-Gyre-Math-Bonum (to
-longdesc match TeX-Gyre-Bonum), TeX-Gyre-Math-Pagella (to match TeX-Gyre-
-longdesc Pagella), TeX-Gyre-Math-Schola (to match TeX-Gyre-Schola) and
-longdesc TeX-Gyre-Math-Termes (to match TeX-Gyre-Termes) fonts are
-longdesc provided.
+longdesc match TeX-Gyre-Bonum), TeX-Gyre-Math-Pagella (to match
+longdesc TeX-Gyre-Pagella), TeX-Gyre-Math-Schola (to match
+longdesc TeX-Gyre-Schola) and TeX-Gyre-Math-Termes (to match
+longdesc TeX-Gyre-Termes) fonts are provided.
docfiles size=179
texmf-dist/doc/fonts/tex-gyre-math/GUST-FONT-LICENSE.txt
texmf-dist/doc/fonts/tex-gyre-math/INSTALL.txt
@@ -202994,8 +203033,8 @@
longdesc TeX4ht does not parse (La)TeX source (so that it avoids the
longdesc difficulties encountered by many other converters, arising from
longdesc the irregularity of (La)TeX syntax). Instead, TeX4ht uses
-longdesc (La)TeX itself (with an extra macro package) to produce a non-
-longdesc standard DVI file that it can then process. This technique
+longdesc (La)TeX itself (with an extra macro package) to produce a
+longdesc non-standard DVI file that it can then process. This technique
longdesc allows TeX4ht to approach the robustness characteristic of
longdesc restricted-syntax systems such as hyperlatex and gellmu. Note
longdesc that CTAN no longer holds the definitive sources of the
@@ -207214,8 +207253,8 @@
longdesc except that it isn't tied to LaTeX. Tools include: engine and
longdesc format detection, expansion control, command definition and
longdesc manipulation, various testing macros, string operations, and
-longdesc highly customizable while and for loops. The package requires e-
-longdesc TeX (and, should you want to compile its documentation, the
+longdesc highly customizable while and for loops. The package requires
+longdesc e-TeX (and, should you want to compile its documentation, the
longdesc pitex package is also needed).
docfiles size=48
texmf-dist/doc/generic/texapi/README details="Readme"
@@ -208042,7 +208081,7 @@
name texdoc
category TLCore
-revision 44268
+revision 44292
shortdesc Documentation access for TeX distributions
longdesc TeXdoc is an application for easy access to the package
longdesc documentation of a TeX distributions (i.e., .dvi, .pdf or .ps
@@ -208059,8 +208098,7 @@
texmf-dist/doc/texdoc/News
texmf-dist/doc/texdoc/texdoc.pdf
texmf-dist/doc/texdoc/texdoc.tex
-runfiles size=325
- texmf-dist/scripts/texdoc/Data.meta.lua
+runfiles size=394
texmf-dist/scripts/texdoc/Data.tlpdb.lua
texmf-dist/scripts/texdoc/alias.tlu
texmf-dist/scripts/texdoc/config.tlu
@@ -208922,7 +208960,7 @@
name texlive.infra
category TLCore
-revision 44275
+revision 44293
shortdesc basic TeX Live infrastructure
longdesc This package contains the files needed to get the TeX Live
longdesc tools (notably tlmgr) running: perl modules, xz binaries, plus
@@ -208930,7 +208968,7 @@
longdesc install packages, and in the tlcritical repository.
depend texlive.infra.ARCH
postaction shortcut type=menu name="TeX Live Manager" cmd=TEXDIR/bin/win32/tlmgr-gui.exe
-docfiles size=110
+docfiles size=111
README
README.usergroups
index.html
@@ -208968,7 +209006,7 @@
texmf-dist/scripts/texlive/NEWS
tlpkg/README
tlpkg/installer/COPYING.MinGW-runtime.txt
-runfiles size=229
+runfiles size=231
LICENSE.CTAN
LICENSE.TL
release-texlive.txt
@@ -209191,9 +209229,10 @@
longdesc compiled. (This feature is already available in the MikTeX
longdesc distribution for Windows machines.) To use the script, replace
longdesc your (LaTeX) compilation command with texliveonfly.py file.tex
-longdesc (default options are --engine=lualatex and --arguments="-
-longdesc synctex=1 -interaction=nonstopmode", which may all be changed).
-longdesc The script is designed to work on Linux distributions.
+longdesc (default options are --engine=lualatex and
+longdesc --arguments="-synctex=1 -interaction=nonstopmode", which may
+longdesc all be changed). The script is designed to work on Linux
+longdesc distributions.
depend texliveonfly.ARCH
docfiles size=1
texmf-dist/doc/support/texliveonfly/README details="Readme"
@@ -209800,14 +209839,14 @@
category Package
revision 29349
shortdesc Create dynamic online presentations with LaTeX
-longdesc TeXPower is a bundle of packages intended to provide an all-
-longdesc inclusive environment for designing pdf screen presentations to
-longdesc be viewed in full-screen mode, especially for projecting
-longdesc `online' with a video beamer. For some of its core functions,
-longdesc it uses code derived from ppower4 packages. It is, however, not
-longdesc a complete environment in itself: it relies on an existing
-longdesc class for preparing slides (such as foiltex or seminar) or
-longdesc another package such as pdfslide.
+longdesc TeXPower is a bundle of packages intended to provide an
+longdesc all-inclusive environment for designing pdf screen
+longdesc presentations to be viewed in full-screen mode, especially for
+longdesc projecting `online' with a video beamer. For some of its core
+longdesc functions, it uses code derived from ppower4 packages. It is,
+longdesc however, not a complete environment in itself: it relies on an
+longdesc existing class for preparing slides (such as foiltex or
+longdesc seminar) or another package such as pdfslide.
depend tpslifonts
docfiles size=267
texmf-dist/doc/latex/texpower/00readme.txt
@@ -211368,12 +211407,12 @@
longdesc The package combines a document's columns into a PDF "article
longdesc thread". PDF readers that support this mechanism (probably
longdesc Adobe Acrobat/Reader only) can be instructed to scroll
-longdesc automatically from column to column, which facilitates on-
-longdesc screen reading of two-column documents. Even for single-column
-longdesc documents, threadcol supports the creation of multiple article
-longdesc threads, which help organize discontiguous but logically
-longdesc related regions of text into a form that the user can scroll
-longdesc through as if its contents were contiguous.
+longdesc automatically from column to column, which facilitates
+longdesc on-screen reading of two-column documents. Even for
+longdesc single-column documents, threadcol supports the creation of
+longdesc multiple article threads, which help organize discontiguous but
+longdesc logically related regions of text into a form that the user can
+longdesc scroll through as if its contents were contiguous.
docfiles size=81
texmf-dist/doc/latex/threadcol/README details="Readme"
texmf-dist/doc/latex/threadcol/threadcol.pdf details="Package documentation"
@@ -211964,15 +212003,15 @@
category Package
revision 25087
shortdesc Coordinate transformation styles for 3d plotting in TikZ
-longdesc The package provides straightforward ways to define three-
-longdesc dimensional coordinate frames through which to plot in TikZ.
-longdesc The user can specify the orientation of the main coordinate
-longdesc frame, and use standard TikZ commands and coordinates to render
-longdesc their tikzfigure. A secondary coordinate frame is provided to
-longdesc allow rotations and translations with respect to the main
-longdesc coordinate frame. In addition, the package can also handle
-longdesc plotting user-specified functions in spherical polar
-longdesc coordinates, where both the radius and fill color can be
+longdesc The package provides straightforward ways to define
+longdesc three-dimensional coordinate frames through which to plot in
+longdesc TikZ. The user can specify the orientation of the main
+longdesc coordinate frame, and use standard TikZ commands and
+longdesc coordinates to render their tikzfigure. A secondary coordinate
+longdesc frame is provided to allow rotations and translations with
+longdesc respect to the main coordinate frame. In addition, the package
+longdesc can also handle plotting user-specified functions in spherical
+longdesc polar coordinates, where both the radius and fill color can be
longdesc expressed as parametric functions of polar angles.
docfiles size=139
texmf-dist/doc/latex/tikz-3dplot/CHANGELOG
@@ -212095,9 +212134,9 @@
longdesc easily generated within LaTeX with minimal user instructions
longdesc and without the need of external programs. It builds upon the
longdesc TikZ package and leverages the graph placement algorithms from
-longdesc TikZ in order to automate the placement of many vertices. tikz-
-longdesc feynman still allows fine-tuned placement of vertices so that
-longdesc even complex diagrams can still be generated with ease.
+longdesc TikZ in order to automate the placement of many vertices.
+longdesc tikz-feynman still allows fine-tuned placement of vertices so
+longdesc that even complex diagrams can still be generated with ease.
docfiles size=104
texmf-dist/doc/latex/tikz-feynman/LICENSE
texmf-dist/doc/latex/tikz-feynman/README.md details="Readme"
@@ -212318,8 +212357,8 @@
category Package
revision 28715
shortdesc Import TikZ images from colletions
-longdesc The package addresses the problem of importing only one TikZ-
-longdesc image from a file holding multiple images.
+longdesc The package addresses the problem of importing only one
+longdesc TikZ-image from a file holding multiple images.
docfiles size=43
texmf-dist/doc/latex/tikzinclude/README details="Readme"
texmf-dist/doc/latex/tikzinclude/tikzinclude.pdf details="Package documentation"
@@ -213919,8 +213958,8 @@
catalogue tlc2-examples
shortdesc Examples from "The LaTeX Companion", second edition
longdesc The source of the examples printed in the book, together with
-longdesc necessary supporting files. The book was published by Addison-
-longdesc Wesley, 2004, ISBN 0-201-36299-6.
+longdesc necessary supporting files. The book was published by
+longdesc Addison-Wesley, 2004, ISBN 0-201-36299-6.
docfiles size=890
texmf-dist/doc/latex/tlc2/1-3-1.ltx
texmf-dist/doc/latex/tlc2/1-3-2.ltx2
@@ -218582,8 +218621,8 @@
longdesc package uses PostScript code, loaded by dvips, so output can
longdesc only be generated by use of dvips. The package lingmacros.sty
longdesc defines a few macros for linguists: \enumsentence for
-longdesc enumerating sentence examples, simple tabular-based non-
-longdesc connected tree macros, and gloss macros.
+longdesc enumerating sentence examples, simple tabular-based
+longdesc non-connected tree macros, and gloss macros.
docfiles size=42
texmf-dist/doc/latex/tree-dvips/Makefile
texmf-dist/doc/latex/tree-dvips/README details="Readme"
@@ -219043,26 +219082,26 @@
longdesc https://tu-dresden.de/service/publizieren/cd/4_latex from the
longdesc university marketing university marketing with regard to the
longdesc use of LaTeX. To install the PostScript fonts, please refer to
-longdesc the corresponding release under https://github.com/tud-
-longdesc cd/tudscr/releases/tag/fonts and the LaTeX forum of the
-longdesc Technische Universitat Dresden: http://latex.wcms-file3.tu-
-longdesc dresden.de/phpBB3/. The bundle offers: the three document
-longdesc classes tudscrartcl, tudscrreprt and tudscrbook which serve as
-longdesc wrapper classes for scrartcl, scrreprt and scrbook, the class
-longdesc tudscrposter for creating posters, the package tudscrsupervisor
-longdesc providing environments and macros to create tasks, evaluations
-longdesc and notices for scientific theses, the package tudscrfonts,
-longdesc which makes the corporate design fonts of the Technische
-longdesc Universitat Dresden available for LaTeX standard classes and
-longdesc KOMA-Script classes, the package fix-tudscrfonts, which
-longdesc provides the same fonts to additional corporate design classes
-longdesc not related to TUD-Script the package tudscrcomp, which
-longdesc simplifies the switch to TUD-Script from external corporate
-longdesc design classes, the package mathswap for swapping math
-longdesc delimiters within numbers (similar to ionumbers), the package
-longdesc twocolfix for fixing the positioning bug of headings in
-longdesc twocolumn layout and an comprehensive user documentation as
-longdesc well as several tutorials.
+longdesc the corresponding release under
+longdesc https://github.com/tud-cd/tudscr/releases/tag/fonts and the
+longdesc LaTeX forum of the Technische Universitat Dresden:
+longdesc http://latex.wcms-file3.tu-dresden.de/phpBB3/. The bundle
+longdesc offers: the three document classes tudscrartcl, tudscrreprt and
+longdesc tudscrbook which serve as wrapper classes for scrartcl,
+longdesc scrreprt and scrbook, the class tudscrposter for creating
+longdesc posters, the package tudscrsupervisor providing environments
+longdesc and macros to create tasks, evaluations and notices for
+longdesc scientific theses, the package tudscrfonts, which makes the
+longdesc corporate design fonts of the Technische Universitat Dresden
+longdesc available for LaTeX standard classes and KOMA-Script classes,
+longdesc the package fix-tudscrfonts, which provides the same fonts to
+longdesc additional corporate design classes not related to TUD-Script
+longdesc the package tudscrcomp, which simplifies the switch to
+longdesc TUD-Script from external corporate design classes, the package
+longdesc mathswap for swapping math delimiters within numbers (similar
+longdesc to ionumbers), the package twocolfix for fixing the positioning
+longdesc bug of headings in twocolumn layout and an comprehensive user
+longdesc documentation as well as several tutorials.
docfiles size=1147
texmf-dist/doc/latex/tudscr/LICENSE.md
texmf-dist/doc/latex/tudscr/README.md details="Readme"
@@ -219425,9 +219464,9 @@
category Package
revision 29803
shortdesc Provide "turn page" instructions
-longdesc The package prints a 'turn' instruction at the bottom of odd-
-longdesc numbered pages (except the last). This is a common convention
-longdesc for examination papers and the like.
+longdesc The package prints a 'turn' instruction at the bottom of
+longdesc odd-numbered pages (except the last). This is a common
+longdesc convention for examination papers and the like.
docfiles size=45
texmf-dist/doc/latex/turnthepage/Makefile
texmf-dist/doc/latex/turnthepage/README details="Readme"
@@ -220261,14 +220300,14 @@
revision 44238
shortdesc Macros for font diagnostics
longdesc This package provides macros for measuring alphabet lengths
-longdesc (i.e. the length occupied by the characters "abcd...xyz"), em-
-longdesc widths and ex-heights, which may help in making typesetting
+longdesc (i.e. the length occupied by the characters "abcd...xyz"),
+longdesc em-widths and ex-heights, which may help in making typesetting
longdesc decisions. The package is compatible with pdfLaTeX, LuaLaTeX,
longdesc and XeLaTeX, and will accept font family switches defined via
longdesc the fontspec package. The plan is that future versions shall be
-longdesc able to provide even more diagnostic tools, and some LuaTeX-
-longdesc specific special commands, too. The package relies on the
-longdesc following other LaTeX packages: expl3, array, booktabs, and
+longdesc able to provide even more diagnostic tools, and some
+longdesc LuaTeX-specific special commands, too. The package relies on
+longdesc the following other LaTeX packages: expl3, array, booktabs, and
longdesc siunitx.
docfiles size=86
texmf-dist/doc/latex/typoaid/README.md details="Readme"
@@ -220311,8 +220350,8 @@
category Package
revision 15878
shortdesc University of Arizona thesis and dissertation format
-longdesc This package provides a LaTeX2e document class named 'ua-
-longdesc thesis' for typesetting theses and dissertations in the
+longdesc This package provides a LaTeX2e document class named
+longdesc 'ua-thesis' for typesetting theses and dissertations in the
longdesc official format required by the University of Arizona.
longdesc Moreover, there is a fully compatible alternative document
longdesc class 'my-thesis' for private 'nice' copies of the
@@ -225043,9 +225082,9 @@
longdesc set up and one for initialising XeTeX character classes as has
longdesc been carried out to date by unicode-letters.tex. The source
longdesc data are distributed in accordance with the license stipulated
-longdesc by the Unicode Consortium. The bundle as a whole is co-
-longdesc ordinated by the LaTeX3 Project as a general resource for TeX
-longdesc users.
+longdesc by the Unicode Consortium. The bundle as a whole is
+longdesc co-ordinated by the LaTeX3 Project as a general resource for
+longdesc TeX users.
docfiles size=2
texmf-dist/doc/generic/unicode-data/README.md details="Readme"
runfiles size=542
@@ -227271,10 +227310,10 @@
longdesc The package is an extension for the listings package that
longdesc provides a source code printer for LaTeX. This package defines
longdesc new language definitions and listing environments for the three
-longdesc language dialects of the Vienna Development Method: VDM-SL, VDM-
-longdesc PP and VDM-RT. If one wants to typeset VDM with a mathematical
-longdesc syntax instead of the ASCII syntax used here one should use the
-longdesc vdm pacakge instead
+longdesc language dialects of the Vienna Development Method: VDM-SL,
+longdesc VDM-PP and VDM-RT. If one wants to typeset VDM with a
+longdesc mathematical syntax instead of the ASCII syntax used here one
+longdesc should use the vdm pacakge instead
docfiles size=22
texmf-dist/doc/latex/vdmlisting/README details="Package Readme"
texmf-dist/doc/latex/vdmlisting/vdmlisting.pdf details="Package documentation"
@@ -228682,10 +228721,10 @@
category Package
revision 17177
shortdesc Define commands which expand to verbatim text
-longdesc The package defines a single command \verbdef (which has a *-
-longdesc form, like \verb). \verbdef will define a robust command whose
-longdesc body expands to verbatim text. By using commands defined by
-longdesc \verbdef, one can put verbatim text into the arguments of
+longdesc The package defines a single command \verbdef (which has a
+longdesc *-form, like \verb). \verbdef will define a robust command
+longdesc whose body expands to verbatim text. By using commands defined
+longdesc by \verbdef, one can put verbatim text into the arguments of
longdesc commands; since the defined command is robust, it doesn't
longdesc matter if the argument is moving. (Full details of syntax and
longdesc caveats about use are in comments in the file itself.)
@@ -231886,8 +231925,8 @@
revision 16082
shortdesc An environment for typesetting tables of specified width
longdesc The package defines a new environment that, unlike tabularX,
-longdesc typesets a table of specified width by working on the inter-
-longdesc column glue; the tabular cells will all be stretched (or
+longdesc typesets a table of specified width by working on the
+longdesc inter-column glue; the tabular cells will all be stretched (or
longdesc shrunk) according to need. The package will use the e-TeX
longdesc arithmetic extensions if they are available (they are, in most
longdesc modern distributions).
@@ -233630,10 +233669,10 @@
shortdesc Create beautiful scientific Persian/Latin posters using TikZ
longdesc This package is designed for making beautiful scientific
longdesc Persian/Latin posters. It is a fork of baposter by Brian Amberg
-longdesc and Reinhold Kainhofer available at http://www.brian-
-longdesc amberg.de/uni/poster/. baposter's users should be able to
-longdesc compile their poster using xebaposter (instead of baposter)
-longdesc without any problem.
+longdesc and Reinhold Kainhofer available at
+longdesc http://www.brian-amberg.de/uni/poster/. baposter's users should
+longdesc be able to compile their poster using xebaposter (instead of
+longdesc baposter) without any problem.
docfiles size=163
texmf-dist/doc/latex/xebaposter/README details="Readme"
texmf-dist/doc/latex/xebaposter/images/docs-boxshape.pdf
@@ -236004,10 +236043,10 @@
shortdesc Generate Unicode characters from accented glyphs
longdesc The package supports XeTeX's (and other putative future similar
longdesc engines') need for Unicode characters, in a similar way to what
-longdesc the fontenc does for 8-bit (and the like) fonts: convert accent-
-longdesc glyph sequence to a single Unicode character for output. The
-longdesc package also covers glyphs specified by packages (such as tipa)
-longdesc which define many commands for single text glyphs.
+longdesc the fontenc does for 8-bit (and the like) fonts: convert
+longdesc accent-glyph sequence to a single Unicode character for output.
+longdesc The package also covers glyphs specified by packages (such as
+longdesc tipa) which define many commands for single text glyphs.
depend tipa
docfiles size=1
texmf-dist/doc/xelatex/xunicode/README details="Readme"
@@ -236076,8 +236115,8 @@
longdesc endocyclic double bonds, and bond patterns. In some cases there
longdesc are additional arguments for specifying hetero-atoms on the
longdesc vertices of heterocycles. It is believed that this systematic
-longdesc design allows XyMTeX to operate as a practical (device-
-longdesc independent) tool for use with LaTeX.
+longdesc design allows XyMTeX to operate as a practical
+longdesc (device-independent) tool for use with LaTeX.
docfiles size=71
texmf-dist/doc/latex/xymtex/doc/README.TEXLIVE
texmf-dist/doc/latex/xymtex/readme/oldreadme/readme402.doc
@@ -236206,8 +236245,8 @@
revision 31859
shortdesc Flexible diagramming macros
longdesc A package for typesetting a variety of graphs and diagrams with
-longdesc TeX. Xy-pic works with most formats (including LaTeX, AMS-
-longdesc LaTeX, AMS-TeX, and plain TeX). The distribution includes
+longdesc TeX. Xy-pic works with most formats (including LaTeX,
+longdesc AMS-LaTeX, AMS-TeX, and plain TeX). The distribution includes
longdesc Michael Barr's diag package, which was previously distributed
longdesc stand-alone.
execute addMixedMap xypic.map
@@ -236504,8 +236543,8 @@
longdesc Unified Symbols Loader"... The package allows the user to
longdesc access a symbol without loading the package that usually
longdesc provides it; this has the advantage of avoiding the name
-longdesc clashes that so commonly trouble those who load symbol-
-longdesc packages.
+longdesc clashes that so commonly trouble those who load
+longdesc symbol-packages.
docfiles size=653
texmf-dist/doc/latex/yagusylo/LISEZMOI details="Lisez moi" language="fr"
texmf-dist/doc/latex/yagusylo/README details="Readme" language="en"
More information about the tex-live-commits
mailing list