texlive[41520]

commits+kakuto at tug.org commits+kakuto at tug.org
Wed Jun 22 09:29:08 CEST 2016 

Revision: 41520
          http://tug.org/svn/texlive?view=revision&revision=41520
Author:   kakuto
Date:     2016-06-22 09:29:08 +0200 (Wed, 22 Jun 2016)
Log Message:
-----------
lcdf-typetools 2.106

Modified Paths:
--------------
    trunk/Build/source/texk/lcdf-typetools/lcdf-typetools-src/Makefile.in

Modified: trunk/Build/source/texk/lcdf-typetools/lcdf-typetools-src/Makefile.in
===================================================================
--- trunk/Build/source/texk/lcdf-typetools/lcdf-typetools-src/Makefile.in	2016-06-22 06:27:55 UTC (rev 41519)
+++ trunk/Build/source/texk/lcdf-typetools/lcdf-typetools-src/Makefile.in	2016-06-22 07:29:08 UTC (rev 41520)
@@ -86,18 +86,27 @@
 NORMAL_UNINSTALL = :
 PRE_UNINSTALL = :
 POST_UNINSTALL = :
-subdir = .
+build_triplet = @build@
+host_triplet = @host@
+subdir = lcdf-typetools-src
 ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-am__aclocal_m4_deps = $(top_srcdir)/m4/lcdf-typetools.m4 \
-	$(top_srcdir)/configure.ac
+am__aclocal_m4_deps = $(top_srcdir)/m4/ac_cxx_template_objs.m4 \
+	$(top_srcdir)/../../m4/kpse-common.m4 \
+	$(top_srcdir)/../../m4/kpse-cxx-hack.m4 \
+	$(top_srcdir)/../../m4/kpse-kpathsea-flags.m4 \
+	$(top_srcdir)/../../m4/kpse-warnings.m4 \
+	$(top_srcdir)/../../m4/kpse-win32.m4 \
+	$(top_srcdir)/../../m4/libtool.m4 \
+	$(top_srcdir)/../../m4/ltoptions.m4 \
+	$(top_srcdir)/../../m4/ltsugar.m4 \
+	$(top_srcdir)/../../m4/ltversion.m4 \
+	$(top_srcdir)/../../m4/lt~obsolete.m4 $(top_srcdir)/version.ac \
+	$(top_srcdir)/ac/lcdf-typetools.ac $(top_srcdir)/configure.ac
 am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
 	$(ACLOCAL_M4)
-DIST_COMMON = $(srcdir)/Makefile.am $(top_srcdir)/configure \
-	$(am__configure_deps) $(am__DIST_COMMON)
-am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
- configure.lineno config.status.lineno
+DIST_COMMON = $(srcdir)/Makefile.am $(am__DIST_COMMON)
 mkinstalldirs = $(install_sh) -d
-CONFIG_HEADER = autoconf.h
+CONFIG_HEADER = $(top_builddir)/autoconf.h
 CONFIG_CLEAN_FILES =
 CONFIG_CLEAN_VPATH_FILES =
 AM_V_P = $(am__v_P_ at AM_V@)
@@ -163,9 +172,8 @@
   $(RECURSIVE_CLEAN_TARGETS) \
   $(am__extra_recursive_targets)
 AM_RECURSIVE_TARGETS = $(am__recursive_targets:-recursive=) TAGS CTAGS \
-	cscope distdir dist dist-all distcheck
-am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) \
-	$(LISP)autoconf.h.in
+	distdir
+am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP)
 # Read a list of newline-separated strings from the standard input,
 # and print each of them once, without duplicates.  Input order is
 # *not* preserved.
@@ -184,19 +192,8 @@
   done | $(am__uniquify_input)`
 ETAGS = etags
 CTAGS = ctags
-CSCOPE = cscope
-am__DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/autoconf.h.in \
-	COPYING INSTALL compile depcomp install-sh missing
+am__DIST_COMMON = $(srcdir)/Makefile.in COPYING INSTALL NEWS.md
 DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
-distdir = $(PACKAGE)-$(VERSION)
-top_distdir = $(distdir)
-am__remove_distdir = \
-  if test -d "$(distdir)"; then \
-    find "$(distdir)" -type d ! -perm -200 -exec chmod u+w {} ';' \
-      && rm -rf "$(distdir)" \
-      || { sleep 5 && rm -rf "$(distdir)"; }; \
-  else :; fi
-am__post_remove_distdir = $(am__remove_distdir)
 am__relativize = \
   dir0=`pwd`; \
   sed_first='s,^\([^/]*\)/.*$$,\1,'; \
@@ -222,16 +219,11 @@
     dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \
   done; \
   reldir="$$dir2"
-DIST_ARCHIVES = $(distdir).tar.gz
-GZIP_ENV = --best
-DIST_TARGETS = dist-gzip
-distuninstallcheck_listfiles = find . -type f -print
-am__distuninstallcheck_listfiles = $(distuninstallcheck_listfiles) \
-  | sed 's|^\./|$(prefix)/|' | grep -v '$(infodir)/dir$$'
-distcleancheck_listfiles = find . -type f -print
 ACLOCAL = @ACLOCAL@
 AMTAR = @AMTAR@
 AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
+AR = @AR@
+AS = @AS@
 AUTOCONF = @AUTOCONF@
 AUTOHEADER = @AUTOHEADER@
 AUTOMAKE = @AUTOMAKE@
@@ -245,14 +237,19 @@
 CXXCPP = @CXXCPP@
 CXXDEPMODE = @CXXDEPMODE@
 CXXFLAGS = @CXXFLAGS@
+CXXLD = @CXXLD@
 CYGPATH_W = @CYGPATH_W@
 DEFS = @DEFS@
 DEPDIR = @DEPDIR@
+DLLTOOL = @DLLTOOL@
+DSYMUTIL = @DSYMUTIL@
+DUMPBIN = @DUMPBIN@
 ECHO_C = @ECHO_C@
 ECHO_N = @ECHO_N@
 ECHO_T = @ECHO_T@
 EGREP = @EGREP@
 EXEEXT = @EXEEXT@
+FGREP = @FGREP@
 GREP = @GREP@
 INSTALL = @INSTALL@
 INSTALL_DATA = @INSTALL_DATA@
@@ -262,15 +259,27 @@
 KPATHSEA_DEPEND = @KPATHSEA_DEPEND@
 KPATHSEA_INCLUDES = @KPATHSEA_INCLUDES@
 KPATHSEA_LIBS = @KPATHSEA_LIBS@
-KPATHSEA_RULE = @KPATHSEA_RULE@
+LCDF_TYPETOOLS_TREE = @LCDF_TYPETOOLS_TREE@
+LCDF_TYPETOOLS_VERSION = @LCDF_TYPETOOLS_VERSION@
+LD = @LD@
 LDFLAGS = @LDFLAGS@
 LIBOBJS = @LIBOBJS@
 LIBS = @LIBS@
+LIBTOOL = @LIBTOOL@
+LIPO = @LIPO@
+LN_S = @LN_S@
 LTLIBOBJS = @LTLIBOBJS@
+LT_SYS_LIBRARY_PATH = @LT_SYS_LIBRARY_PATH@
 MAINT = @MAINT@
 MAKEINFO = @MAKEINFO@
+MANIFEST_TOOL = @MANIFEST_TOOL@
 MKDIR_P = @MKDIR_P@
+NM = @NM@
+NMEDIT = @NMEDIT@
+OBJDUMP = @OBJDUMP@
 OBJEXT = @OBJEXT@
+OTOOL = @OTOOL@
+OTOOL64 = @OTOOL64@
 PACKAGE = @PACKAGE@
 PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
 PACKAGE_NAME = @PACKAGE_NAME@
@@ -279,7 +288,9 @@
 PACKAGE_URL = @PACKAGE_URL@
 PACKAGE_VERSION = @PACKAGE_VERSION@
 PATH_SEPARATOR = @PATH_SEPARATOR@
+PKG_CONFIG = @PKG_CONFIG@
 RANLIB = @RANLIB@
+SED = @SED@
 SELECTED_SUBDIRS = @SELECTED_SUBDIRS@
 SET_MAKE = @SET_MAKE@
 SHELL = @SHELL@
@@ -286,12 +297,16 @@
 STRIP = @STRIP@
 TEMPLATE_OBJS = @TEMPLATE_OBJS@
 VERSION = @VERSION@
+WARNING_CFLAGS = @WARNING_CFLAGS@
+WARNING_CXXFLAGS = @WARNING_CXXFLAGS@
 abs_builddir = @abs_builddir@
 abs_srcdir = @abs_srcdir@
 abs_top_builddir = @abs_top_builddir@
 abs_top_srcdir = @abs_top_srcdir@
+ac_ct_AR = @ac_ct_AR@
 ac_ct_CC = @ac_ct_CC@
 ac_ct_CXX = @ac_ct_CXX@
+ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
 am__include = @am__include@
 am__leading_dot = @am__leading_dot@
 am__quote = @am__quote@
@@ -298,7 +313,11 @@
 am__tar = @am__tar@
 am__untar = @am__untar@
 bindir = @bindir@
+build = @build@
 build_alias = @build_alias@
+build_cpu = @build_cpu@
+build_os = @build_os@
+build_vendor = @build_vendor@
 builddir = @builddir@
 datadir = @datadir@
 datarootdir = @datarootdir@
@@ -307,7 +326,11 @@
 encdir = @encdir@
 exec_prefix = @exec_prefix@
 glyphlistdir = @glyphlistdir@
+host = @host@
 host_alias = @host_alias@
+host_cpu = @host_cpu@
+host_os = @host_os@
+host_vendor = @host_vendor@
 htmldir = @htmldir@
 includedir = @includedir@
 infodir = @infodir@
@@ -331,13 +354,13 @@
 top_build_prefix = @top_build_prefix@
 top_builddir = @top_builddir@
 top_srcdir = @top_srcdir@
-AUTOMAKE_OPTIONS = foreign
+AUTOMAKE_OPTIONS = foreign check-news
 SUBDIRS = liblcdf libefont @SELECTED_SUBDIRS@
 DIST_SUBDIRS = liblcdf libefont cfftot1 mmafm mmpfb otfinfo otftotfm \
 	t1dotlessj t1lint t1rawafm t1reencode t1testpage ttftotype42
 
 EXTRA_DIST = \
-	ONEWS README.md NEWS.md \
+	ONEWS README.md \
 	lcdf-typetools.spec \
 	include/config.h \
 	include/lcdf/bezier.hh \
@@ -395,58 +418,44 @@
 
 glyphlist_DATA = glyphlist.txt texglyphlist.txt
 enc_DATA = 7t.enc
-all: autoconf.h
-	$(MAKE) $(AM_MAKEFLAGS) all-recursive
+all: all-recursive
 
 .SUFFIXES:
-am--refresh: Makefile
-	@:
 $(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am  $(am__configure_deps)
 	@for dep in $?; do \
 	  case '$(am__configure_deps)' in \
 	    *$$dep*) \
-	      echo ' cd $(srcdir) && $(AUTOMAKE) --foreign'; \
-	      $(am__cd) $(srcdir) && $(AUTOMAKE) --foreign \
-		&& exit 0; \
+	      ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
+	        && { if test -f $@; then exit 0; else break; fi; }; \
 	      exit 1;; \
 	  esac; \
 	done; \
-	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign Makefile'; \
+	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign lcdf-typetools-src/Makefile'; \
 	$(am__cd) $(top_srcdir) && \
-	  $(AUTOMAKE) --foreign Makefile
+	  $(AUTOMAKE) --foreign lcdf-typetools-src/Makefile
 Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
 	@case '$?' in \
 	  *config.status*) \
-	    echo ' $(SHELL) ./config.status'; \
-	    $(SHELL) ./config.status;; \
+	    cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
 	  *) \
-	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)'; \
-	    cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe);; \
+	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
+	    cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
 	esac;
 
 $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
-	$(SHELL) ./config.status --recheck
+	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
 
 $(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
-	$(am__cd) $(srcdir) && $(AUTOCONF)
+	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
 $(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
-	$(am__cd) $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
+	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
 $(am__aclocal_m4_deps):
 
-autoconf.h: stamp-h1
-	@test -f $@ || rm -f stamp-h1
-	@test -f $@ || $(MAKE) $(AM_MAKEFLAGS) stamp-h1
+mostlyclean-libtool:
+	-rm -f *.lo
 
-stamp-h1: $(srcdir)/autoconf.h.in $(top_builddir)/config.status
-	@rm -f stamp-h1
-	cd $(top_builddir) && $(SHELL) ./config.status autoconf.h
-$(srcdir)/autoconf.h.in: @MAINTAINER_MODE_TRUE@ $(am__configure_deps) 
-	($(am__cd) $(top_srcdir) && $(AUTOHEADER))
-	rm -f stamp-h1
-	touch $@
-
-distclean-hdr:
-	-rm -f autoconf.h stamp-h1
+clean-libtool:
+	-rm -rf .libs _libs
 install-encDATA: $(enc_DATA)
 	@$(NORMAL_INSTALL)
 	@list='$(enc_DATA)'; test -n "$(encdir)" || list=; \
@@ -570,12 +579,6 @@
 	here=`$(am__cd) $(top_builddir) && pwd` \
 	  && $(am__cd) $(top_srcdir) \
 	  && gtags -i $(GTAGS_ARGS) "$$here"
-cscope: cscope.files
-	test ! -s cscope.files \
-	  || $(CSCOPE) -b -q $(AM_CSCOPEFLAGS) $(CSCOPEFLAGS) -i cscope.files $(CSCOPE_ARGS)
-clean-cscope:
-	-rm -f cscope.files
-cscope.files: clean-cscope cscopelist
 cscopelist: cscopelist-recursive
 
 cscopelist-am: $(am__tagged_files)
@@ -594,11 +597,8 @@
 
 distclean-tags:
 	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
-	-rm -f cscope.out cscope.in.out cscope.po.out cscope.files
 
 distdir: $(DISTFILES)
-	$(am__remove_distdir)
-	test -d "$(distdir)" || mkdir "$(distdir)"
 	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
 	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
 	list='$(DISTFILES)'; \
@@ -656,140 +656,9 @@
 	$(MAKE) $(AM_MAKEFLAGS) \
 	  top_distdir="$(top_distdir)" distdir="$(distdir)" \
 	  dist-hook
-	-test -n "$(am__skip_mode_fix)" \
-	|| find "$(distdir)" -type d ! -perm -755 \
-		-exec chmod u+rwx,go+rx {} \; -o \
-	  ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \
-	  ! -type d ! -perm -400 -exec chmod a+r {} \; -o \
-	  ! -type d ! -perm -444 -exec $(install_sh) -c -m a+r {} {} \; \
-	|| chmod -R a+r "$(distdir)"
-dist-gzip: distdir
-	tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
-	$(am__post_remove_distdir)
-
-dist-bzip2: distdir
-	tardir=$(distdir) && $(am__tar) | BZIP2=$${BZIP2--9} bzip2 -c >$(distdir).tar.bz2
-	$(am__post_remove_distdir)
-
-dist-lzip: distdir
-	tardir=$(distdir) && $(am__tar) | lzip -c $${LZIP_OPT--9} >$(distdir).tar.lz
-	$(am__post_remove_distdir)
-
-dist-xz: distdir
-	tardir=$(distdir) && $(am__tar) | XZ_OPT=$${XZ_OPT--e} xz -c >$(distdir).tar.xz
-	$(am__post_remove_distdir)
-
-dist-tarZ: distdir
-	@echo WARNING: "Support for distribution archives compressed with" \
-		       "legacy program 'compress' is deprecated." >&2
-	@echo WARNING: "It will be removed altogether in Automake 2.0" >&2
-	tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z
-	$(am__post_remove_distdir)
-
-dist-shar: distdir
-	@echo WARNING: "Support for shar distribution archives is" \
-	               "deprecated." >&2
-	@echo WARNING: "It will be removed altogether in Automake 2.0" >&2
-	shar $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).shar.gz
-	$(am__post_remove_distdir)
-
-dist-zip: distdir
-	-rm -f $(distdir).zip
-	zip -rq $(distdir).zip $(distdir)
-	$(am__post_remove_distdir)
-
-dist dist-all:
-	$(MAKE) $(AM_MAKEFLAGS) $(DIST_TARGETS) am__post_remove_distdir='@:'
-	$(am__post_remove_distdir)
-
-# This target untars the dist file and tries a VPATH configuration.  Then
-# it guarantees that the distribution is self-contained by making another
-# tarfile.
-distcheck: dist
-	case '$(DIST_ARCHIVES)' in \
-	*.tar.gz*) \
-	  GZIP=$(GZIP_ENV) gzip -dc $(distdir).tar.gz | $(am__untar) ;;\
-	*.tar.bz2*) \
-	  bzip2 -dc $(distdir).tar.bz2 | $(am__untar) ;;\
-	*.tar.lz*) \
-	  lzip -dc $(distdir).tar.lz | $(am__untar) ;;\
-	*.tar.xz*) \
-	  xz -dc $(distdir).tar.xz | $(am__untar) ;;\
-	*.tar.Z*) \
-	  uncompress -c $(distdir).tar.Z | $(am__untar) ;;\
-	*.shar.gz*) \
-	  GZIP=$(GZIP_ENV) gzip -dc $(distdir).shar.gz | unshar ;;\
-	*.zip*) \
-	  unzip $(distdir).zip ;;\
-	esac
-	chmod -R a-w $(distdir)
-	chmod u+w $(distdir)
-	mkdir $(distdir)/_build $(distdir)/_build/sub $(distdir)/_inst
-	chmod a-w $(distdir)
-	test -d $(distdir)/_build || exit 0; \
-	dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \
-	  && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \
-	  && am__cwd=`pwd` \
-	  && $(am__cd) $(distdir)/_build/sub \
-	  && ../../configure \
-	    $(AM_DISTCHECK_CONFIGURE_FLAGS) \
-	    $(DISTCHECK_CONFIGURE_FLAGS) \
-	    --srcdir=../.. --prefix="$$dc_install_base" \
-	  && $(MAKE) $(AM_MAKEFLAGS) \
-	  && $(MAKE) $(AM_MAKEFLAGS) dvi \
-	  && $(MAKE) $(AM_MAKEFLAGS) check \
-	  && $(MAKE) $(AM_MAKEFLAGS) install \
-	  && $(MAKE) $(AM_MAKEFLAGS) installcheck \
-	  && $(MAKE) $(AM_MAKEFLAGS) uninstall \
-	  && $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \
-	        distuninstallcheck \
-	  && chmod -R a-w "$$dc_install_base" \
-	  && ({ \
-	       (cd ../.. && umask 077 && mkdir "$$dc_destdir") \
-	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \
-	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \
-	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \
-	            distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \
-	      } || { rm -rf "$$dc_destdir"; exit 1; }) \
-	  && rm -rf "$$dc_destdir" \
-	  && $(MAKE) $(AM_MAKEFLAGS) dist \
-	  && rm -rf $(DIST_ARCHIVES) \
-	  && $(MAKE) $(AM_MAKEFLAGS) distcleancheck \
-	  && cd "$$am__cwd" \
-	  || exit 1
-	$(am__post_remove_distdir)
-	@(echo "$(distdir) archives ready for distribution: "; \
-	  list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \
-	  sed -e 1h -e 1s/./=/g -e 1p -e 1x -e '$$p' -e '$$x'
-distuninstallcheck:
-	@test -n '$(distuninstallcheck_dir)' || { \
-	  echo 'ERROR: trying to run $@ with an empty' \
-	       '$$(distuninstallcheck_dir)' >&2; \
-	  exit 1; \
-	}; \
-	$(am__cd) '$(distuninstallcheck_dir)' || { \
-	  echo 'ERROR: cannot chdir into $(distuninstallcheck_dir)' >&2; \
-	  exit 1; \
-	}; \
-	test `$(am__distuninstallcheck_listfiles) | wc -l` -eq 0 \
-	   || { echo "ERROR: files left after uninstall:" ; \
-	        if test -n "$(DESTDIR)"; then \
-	          echo "  (check DESTDIR support)"; \
-	        fi ; \
-	        $(distuninstallcheck_listfiles) ; \
-	        exit 1; } >&2
-distcleancheck: distclean
-	@if test '$(srcdir)' = . ; then \
-	  echo "ERROR: distcleancheck can only run from a VPATH build" ; \
-	  exit 1 ; \
-	fi
-	@test `$(distcleancheck_listfiles) | wc -l` -eq 0 \
-	  || { echo "ERROR: files left in build directory after distclean:" ; \
-	       $(distcleancheck_listfiles) ; \
-	       exit 1; } >&2
 check-am: all-am
 check: check-recursive
-all-am: Makefile $(DATA) autoconf.h
+all-am: Makefile $(DATA)
 installdirs: installdirs-recursive
 installdirs-am:
 	for dir in "$(DESTDIR)$(encdir)" "$(DESTDIR)$(glyphlistdir)"; do \
@@ -827,12 +696,11 @@
 	@echo "it deletes files that may require special tools to rebuild."
 clean: clean-recursive
 
-clean-am: clean-generic mostlyclean-am
+clean-am: clean-generic clean-libtool mostlyclean-am
 
 distclean: distclean-recursive
-	-rm -f $(am__CONFIG_DISTCLEAN_FILES)
 	-rm -f Makefile
-distclean-am: clean-am distclean-generic distclean-hdr distclean-tags
+distclean-am: clean-am distclean-generic distclean-tags
 
 dvi: dvi-recursive
 
@@ -875,14 +743,12 @@
 installcheck-am:
 
 maintainer-clean: maintainer-clean-recursive
-	-rm -f $(am__CONFIG_DISTCLEAN_FILES)
-	-rm -rf $(top_srcdir)/autom4te.cache
 	-rm -f Makefile
 maintainer-clean-am: distclean-am maintainer-clean-generic
 
 mostlyclean: mostlyclean-recursive
 
-mostlyclean-am: mostlyclean-generic
+mostlyclean-am: mostlyclean-generic mostlyclean-libtool
 
 pdf: pdf-recursive
 
@@ -894,23 +760,21 @@
 
 uninstall-am: uninstall-encDATA uninstall-glyphlistDATA
 
-.MAKE: $(am__recursive_targets) all install-am install-strip
+.MAKE: $(am__recursive_targets) install-am install-strip
 
-.PHONY: $(am__recursive_targets) CTAGS GTAGS TAGS all all-am \
-	am--refresh check check-am clean clean-cscope clean-generic \
-	cscope cscopelist-am ctags ctags-am dist dist-all dist-bzip2 \
-	dist-gzip dist-hook dist-lzip dist-shar dist-tarZ dist-xz \
-	dist-zip distcheck distclean distclean-generic distclean-hdr \
-	distclean-tags distcleancheck distdir distuninstallcheck dvi \
-	dvi-am html html-am info info-am install install-am \
-	install-data install-data-am install-dvi install-dvi-am \
-	install-encDATA install-exec install-exec-am \
-	install-glyphlistDATA install-html install-html-am \
-	install-info install-info-am install-man install-pdf \
-	install-pdf-am install-ps install-ps-am install-strip \
-	installcheck installcheck-am installdirs installdirs-am \
-	maintainer-clean maintainer-clean-generic mostlyclean \
-	mostlyclean-generic pdf pdf-am ps ps-am tags tags-am uninstall \
+.PHONY: $(am__recursive_targets) CTAGS GTAGS TAGS all all-am check \
+	check-am clean clean-generic clean-libtool cscopelist-am ctags \
+	ctags-am dist-hook distclean distclean-generic \
+	distclean-libtool distclean-tags distdir dvi dvi-am html \
+	html-am info info-am install install-am install-data \
+	install-data-am install-dvi install-dvi-am install-encDATA \
+	install-exec install-exec-am install-glyphlistDATA \
+	install-html install-html-am install-info install-info-am \
+	install-man install-pdf install-pdf-am install-ps \
+	install-ps-am install-strip installcheck installcheck-am \
+	installdirs installdirs-am maintainer-clean \
+	maintainer-clean-generic mostlyclean mostlyclean-generic \
+	mostlyclean-libtool pdf pdf-am ps ps-am tags tags-am uninstall \
 	uninstall-am uninstall-encDATA uninstall-glyphlistDATA
 
 .PRECIOUS: Makefile

More information about the tex-live-commits mailing list