[pstricks] PSTricks on the linux distrib Fedora 22
Jacques RUBIN
jac.rub at gmail.com
Mon Oct 5 12:33:31 CEST 2015
Hi!
I tried to use the PSTricks extension on Fedora 22. I ought to mention
that I have no compilation problems with LaTeX for a lot of other latex
files.
Also, I use regularly Tikz with gnuplot for instance.
I tried to compile the file provided on the PSTricks website named
'psplot1.tex' (http://tug.org/PSTricks/pst-plot/psplot1.tex). The
PSTricks commands are not recognized though the corresponding texlive
pstricks package with all of its extensions is correctly installed in
the /usr/share/texlive/texmf-dist folder. Here is below the result of
the unix command: latex psplot1.tex; also, the content of the log file.
Why this issue and, obviously, how to correct it?
Best regards
Jacques
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
[user at pc2 ~]$ latex '/home/user/Bureau/psplot1.tex'
This is pdfTeX, Version 3.14159265-2.6-1.40.15 (TeX Live 2014)
(preloaded format=latex)
restricted \write18 enabled.
entering extended mode
(/home/user/Bureau/psplot1.tex
LaTeX2e <2011/06/27>
Babel <3.9k> and hyphenation patterns for 19 languages loaded.
(/usr/share/texlive/texmf-dist/tex/latex/base/article.cls
Document Class: article 2007/10/19 v1.4h Standard LaTeX document class
(/usr/share/texlive/texmf-dist/tex/latex/base/size10.clo))
(/usr/share/texlive/texmf-dist/tex/latex/pstricks/pstricks.sty
(/usr/share/texlive/texmf-dist/tex/generic/oberdiek/ifpdf.sty)
(/usr/share/texlive/texmf-dist/tex/generic/pstricks/pstricks.tex
(/usr/share/texlive/texmf-dist/tex/generic/xkeyval/pst-xkey.tex
(/usr/share/texlive/texmf-dist/tex/latex/xkeyval/xkeyval.sty
(/usr/share/texlive/texmf-dist/tex/generic/xkeyval/xkeyval.tex
(/usr/share/texlive/texmf-dist/tex/generic/xkeyval/keyval.tex))))
(/usr/share/texlive/texmf-dist/tex/generic/pstricks/pst-fp.tex`pst-fp'
v0.05, 2010/01/17 (hv))
(/usr/share/texlive/texmf-dist/tex/generic/pgf/utilities/pgfutil-common.tex
(/usr/share/texlive/texmf-dist/tex/generic/pgf/utilities/pgfutil-common-lists.t
ex))
(/usr/share/texlive/texmf-dist/tex/generic/pgf/utilities/pgfkeys.code.tex
(/usr/share/texlive/texmf-dist/tex/generic/pgf/utilities/pgfkeysfiltered.code.t
ex))
(/usr/share/texlive/texmf-dist/tex/generic/pgf/utilities/pgffor.code.tex
(/usr/share/texlive/texmf-dist/tex/generic/pgf/math/pgfmath.code.tex
(/usr/share/texlive/texmf-dist/tex/generic/pgf/math/pgfmathcalc.code.tex
(/usr/share/texlive/texmf-dist/tex/generic/pgf/math/pgfmathutil.code.tex)
(/usr/share/texlive/texmf-dist/tex/generic/pgf/math/pgfmathparser.code.tex)
(/usr/share/texlive/texmf-dist/tex/generic/pgf/math/pgfmathfunctions.code.tex
(/usr/share/texlive/texmf-dist/tex/generic/pgf/math/pgfmathfunctions.basic.code.tex)
(/usr/share/texlive/texmf-dist/tex/generic/pgf/math/pgfmathfunctions.trigonometric.code.tex)
(/usr/share/texlive/texmf-dist/tex/generic/pgf/math/pgfmathfunctions.random.code.tex)
(/usr/share/texlive/texmf-dist/tex/generic/pgf/math/pgfmathfunctions.comparison.code.tex)
(/usr/share/texlive/texmf-dist/tex/generic/pgf/math/pgfmathfunctions.base.code.tex)
(/usr/share/texlive/texmf-dist/tex/generic/pgf/math/pgfmathfunctions.round.code.tex)
(/usr/share/texlive/texmf-dist/tex/generic/pgf/math/pgfmathfunctions.misc.code.tex)
(/usr/share/texlive/texmf-dist/tex/generic/pgf/math/pgfmathfunctions.integerarithmetics.code.tex)))
(/usr/share/texlive/texmf-dist/tex/generic/pgf/math/pgfmathfloat.code.tex)))`PSTricks'
v2.53a <2014/03/30> (tvz)
(/usr/share/texlive/texmf-dist/tex/generic/pstricks/pstricks.con))
(/usr/share/texlive/texmf-dist/tex/generic/pstricks/pst-fp.tex)
(/usr/share/texlive/texmf-dist/tex/latex/xcolor/xcolor.sty
(/usr/share/texlive/texmf-dist/tex/latex/latexconfig/color.cfg)
(/usr/share/texlive/texmf-dist/tex/latex/graphics/dvips.def)))
(/usr/share/texlive/texmf-dist/tex/latex/pst-plot/pst-plot.sty
(/usr/share/texlive/texmf-dist/tex/latex/xkeyval/pst-xkey.sty)
(/usr/share/texlive/texmf-dist/tex/latex/multido/multido.sty
(/usr/share/texlive/texmf-dist/tex/generic/multido/multido.tex
v1.42, 2010/05/14 <tvz>))
(/usr/share/texlive/texmf-dist/tex/generic/pst-plot/pst-plot.tex
v1.61, 2014/03/12 (tvz,hv))) (./psplot1.aux)
Overfull \hbox (125.2439pt too wide) in paragraph at lines 13--14[][]
Overfull \hbox (125.2439pt too wide) in paragraph at lines 22--23[][]
Overfull \hbox (27.74675pt too wide) in paragraph at lines 48--48[]
\OT1/cmtt/m/n/10 \psgrid[griddots=10,gridlabels=0pt, subgriddiv=0,
gridcolor=black!20][]
Overfull \hbox (27.74675pt too wide) in paragraph at lines 48--48[]
\OT1/cmtt/m/n/10 \psgrid[griddots=10,gridlabels=0pt, subgriddiv=0,
gridcolor=black!20][]
[1] (./psplot1.aux) )
(see the transcript file for additional information)
Output written on psplot1.dvi (1 page, 18928 bytes).
Transcript written on psplot1.log.
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
The log file:
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
This is pdfTeX, Version 3.14159265-2.6-1.40.15 (TeX Live 2014)
(preloaded format=pdflatex 2015.9.30) 5 OCT 2015 11:54
entering extended mode
\write18 enabled.
%&-line parsing enabled.
**psplot1.tex
(./psplot1.tex
LaTeX2e <2011/06/27>
Babel <3.9k> and hyphenation patterns for 19 languages loaded.
(/usr/share/texlive/texmf-dist/tex/latex/base/article.cls
Document Class: article 2007/10/19 v1.4h Standard LaTeX document class
(/usr/share/texlive/texmf-dist/tex/latex/base/size10.clo
File: size10.clo 2007/10/19 v1.4h Standard LaTeX file (size option)
)
\c at part=\count79
\c at section=\count80
\c at subsection=\count81
\c at subsubsection=\count82
\c at paragraph=\count83
\c at subparagraph=\count84
\c at figure=\count85
\c at table=\count86
\abovecaptionskip=\skip41
\belowcaptionskip=\skip42
\bibindent=\dimen102
) (./pstricks.sty
Package: pstricks 2013/12/12 v0.60 LaTeX wrapper for `PSTricks' (RN,HV)
(/usr/share/texlive/texmf-dist/tex/generic/oberdiek/ifpdf.sty
Package: ifpdf 2011/01/30 v2.3 Provides the ifpdf switch (HO)
Package ifpdf Info: pdfTeX in PDF mode is detected.) (./pstricks.tex
(/usr/share/texlive/texmf-dist/tex/generic/xkeyval/pst-xkey.tex
File: pst-xkey.tex 2005/11/25 v1.6 PSTricks specialization of
xkeyval (HA)
(/usr/share/texlive/texmf-dist/tex/latex/xkeyval/xkeyval.sty
Package: xkeyval 2012/10/14 v2.6b package option processing (HA)
(/usr/share/texlive/texmf-dist/tex/generic/xkeyval/xkeyval.tex
\XKV at toks=\toks14
\XKV at tempa@toks=\toks15
\XKV at depth=\count87
File: xkeyval.tex 2012/10/14 v2.6b key=value parser (HA)
(/usr/share/texlive/texmf-dist/tex/generic/xkeyval/keyval.tex))))
(/usr/share/texlive/texmf-dist/tex/generic/pstricks/pst-fp.tex`pst-fp'
v0.05, 2010/01/17 (hv)
\pstFP at xs=\count88
\pstFP at xia=\count89
\pstFP at xib=\count90
\pstFP at xfa=\count91
\pstFP at xfb=\count92
\pstFP at rega=\count93
\pstFP at regb=\count94
\pstFP at regs=\count95
\pstFP at times=\count96
)
(/usr/share/texlive/texmf-dist/tex/generic/pgf/utilities/pgfutil-common.tex
\pgfutil at everybye=\toks16
\pgfutil at tempdima=\dimen103
\pgfutil at tempdimb=\dimen104
(/usr/share/texlive/texmf-dist/tex/generic/pgf/utilities/pgfutil-common-lists.t
ex))
(/usr/share/texlive/texmf-dist/tex/generic/pgf/utilities/pgfkeys.code.tex
\pgfkeys at pathtoks=\toks17
\pgfkeys at temptoks=\toks18
(/usr/share/texlive/texmf-dist/tex/generic/pgf/utilities/pgfkeysfiltered.code.tex
\pgfkeys at tmptoks=\toks19
))
(/usr/share/texlive/texmf-dist/tex/generic/pgf/utilities/pgffor.code.tex
(/usr/share/texlive/texmf-dist/tex/generic/pgf/math/pgfmath.code.tex
(/usr/share/texlive/texmf-dist/tex/generic/pgf/math/pgfmathcalc.code.tex
(/usr/share/texlive/texmf-dist/tex/generic/pgf/math/pgfmathutil.code.tex
\pgf at x=\dimen105
\pgf at xa=\dimen106
\pgf at xb=\dimen107
\pgf at xc=\dimen108
\pgf at y=\dimen109
\pgf at ya=\dimen110
\pgf at yb=\dimen111
\pgf at yc=\dimen112
\c at pgf@counta=\count97
\c at pgf@countb=\count98
\c at pgf@countc=\count99
\c at pgf@countd=\count100
\pgfutil at tempcnta=\count101
\pgfutil at tempcntb=\count102
)
(/usr/share/texlive/texmf-dist/tex/generic/pgf/math/pgfmathparser.code.tex
\pgfmath at dimen=\dimen113
\pgfmath at count=\count103
\pgfmath at box=\box26
\pgfmath at toks=\toks20
\pgfmath at stack@operand=\toks21
\pgfmath at stack@operation=\toks22
)
(/usr/share/texlive/texmf-dist/tex/generic/pgf/math/pgfmathfunctions.code.tex
(/usr/share/texlive/texmf-dist/tex/generic/pgf/math/pgfmathfunctions.basic.code.tex)
(/usr/share/texlive/texmf-dist/tex/generic/pgf/math/pgfmathfunctions.trigonometric.code.tex)
(/usr/share/texlive/texmf-dist/tex/generic/pgf/math/pgfmathfunctions.random.code.tex)
(/usr/share/texlive/texmf-dist/tex/generic/pgf/math/pgfmathfunctions.comparison.code.tex)
(/usr/share/texlive/texmf-dist/tex/generic/pgf/math/pgfmathfunctions.base.code.tex)
(/usr/share/texlive/texmf-dist/tex/generic/pgf/math/pgfmathfunctions.round.code.tex)
(/usr/share/texlive/texmf-dist/tex/generic/pgf/math/pgfmathfunctions.misc.code.tex)
(/usr/share/texlive/texmf-dist/tex/generic/pgf/math/pgfmathfunctions.integerarithmetics.code.tex)))
(/usr/share/texlive/texmf-dist/tex/generic/pgf/math/pgfmathfloat.code.tex
\c at pgfmathroundto@lastzeros=\count104
))
\pgffor at iter=\dimen114
\pgffor at skip=\dimen115
\pgffor at stack=\toks23
\pgffor at toks=\toks24
)
\psLoopIndex=\count105
`PSTricks' v2.53a <2014/03/30> (tvz)
\pst at dima=\dimen116
\pst at dimb=\dimen117
\pst at dimc=\dimen118
\pst at dimd=\dimen119
\pst at dimg=\dimen120
\pst at dimh=\dimen121
\pst at dimm=\dimen122
\pst at dimn=\dimen123
\pst at dimo=\dimen124
\pst at dimp=\dimen125
\pst at hbox=\box27
\pst at ibox=\box28
\pst at boxg=\box29
\pst at cnta=\count106
\pst at cntb=\count107
\pst at cntc=\count108
\pst at cntd=\count109
\pst at cntg=\count110
\pst at cnth=\count111
\pst at cntm=\count112
\pst at cntn=\count113
\pst at cnto=\count114
\pst at cntp=\count115
\@zero=\count116
\pst at toks=\toks25
(/usr/share/texlive/texmf-dist/tex/generic/pstricks/pstricks.con)
\psunit=\dimen126
\psxunit=\dimen127
\psyunit=\dimen128
\pst at C@@rType=\count117
\pslinewidth=\dimen129
\psk at startLW=\dimen130
\psk at endLW=\dimen131
\pst at customdefs=\toks26
\pslinearc=\dimen132
\pst at symbolStep=\dimen133
\pst at symbolWidth=\dimen134
\pst at symbolLinewidth=\dimen135
\everypsbox=\toks27
\psframesep=\dimen136
\pslabelsep=\dimen137
\sh at wgridXunit=\dimen138
\sh at wgridYunit=\dimen139
\pst at shift=\dimen140
)
File: pstricks.tex 2014/03/30 v2.53a `PSTricks' (tvz,hv)
(/usr/share/texlive/texmf-dist/tex/generic/pstricks/pst-fp.tex)
File: pst-fp.tex 2014/03/30 v2.53a `PST-fp' (hv)
(/usr/share/texlive/texmf-dist/tex/latex/xcolor/xcolor.sty
Package: xcolor 2007/01/21 v2.11 LaTeX color extensions (UK)
(/usr/share/texlive/texmf-dist/tex/latex/latexconfig/color.cfg
File: color.cfg 2007/01/18 v1.5 color configuration of teTeX/TeXLive
)
Package xcolor Info: Driver file: pdftex.def on input line 225.
(/usr/share/texlive/texmf-dist/tex/latex/pdftex-def/pdftex.def
File: pdftex.def 2011/05/27 v0.06d Graphics/color for pdfTeX
(/usr/share/texlive/texmf-dist/tex/generic/oberdiek/infwarerr.sty
Package: infwarerr 2010/04/08 v1.3 Providing info/warning/error
messages (HO)
)
(/usr/share/texlive/texmf-dist/tex/generic/oberdiek/ltxcmds.sty
Package: ltxcmds 2011/11/09 v1.22 LaTeX kernel commands for general
use (HO)
)
\Gread at gobject=\count118
)
Package xcolor Info: Model `cmy' substituted by `cmy0' on input line
1337.
Package xcolor Info: Model `hsb' substituted by `rgb' on input line
1341.
Package xcolor Info: Model `RGB' extended on input line 1353.
Package xcolor Info: Model `HTML' substituted by `rgb' on input line
1355.
Package xcolor Info: Model `Hsb' substituted by `hsb' on input line
1356.
Package xcolor Info: Model `tHsb' substituted by `hsb' on input line
1357.
Package xcolor Info: Model `HSB' substituted by `hsb' on input line
1358.
Package xcolor Info: Model `Gray' substituted by `gray' on input
line 1359.
Package xcolor Info: Model `wave' substituted by `hsb' on input line
1360.
))
(./pst-plot.sty
Package: pst-plot 2011/06/05 v1.00 LaTeX wrapper for `pst-plot' (HV)
(/usr/share/texlive/texmf-dist/tex/latex/xkeyval/pst-xkey.sty
Package: pst-xkey 2005/11/25 v1.6 package wrapper for pst-xkey.tex (HA)
)
(/usr/share/texlive/texmf-dist/tex/latex/multido/multido.sty
Package: multido 2004/05/17 package wrapper for PSTricks
`multido.tex', (HV/RN)
(/usr/share/texlive/texmf-dist/tex/generic/multido/multido.tex
v1.42, 2010/05/14 <tvz>
\multido at count=\count119
\multidocount=\count120
\multido at stuff=\toks28
)
File: multido.tex 2010/05/14 v1.42 `multido' (tvz,hv)
)
Package: pst-plot 2011/04/13 package wrapper for pst-plot.tex (hv)
(./pst-plot.tex v1.61, 2014/03/12 (tvz,hv)
\pstRadUnit=\dimen141
\pstRadUnitInv=\dimen142
\pst at linecnt=\count121
\RCD at file=\read1
\psxlabelsep=\dimen143
\psylabelsep=\dimen144
\psk at subticksize=\dimen145
\pst at xticksizeA=\dimen146
\pst at xticksizeB=\dimen147
\pst at xticksizeC=\dimen148
\pst at yticksizeA=\dimen149
\pst at yticksizeB=\dimen150
\pst at yticksizeC=\dimen151
\@digitcounter=\count122
\psk at llx=\dimen152
\psk at lly=\dimen153
\psk at urx=\dimen154
\psk at ury=\dimen155
\pst at xunit=\dimen156
\pst at yunit=\dimen157
)
File: pst-plot.tex 2014/03/12 1.61 `pst-plot' (tvz,hv)
)
(./psplot1.aux)
\openout1 = `psplot1.aux'.
LaTeX Font Info: Checking defaults for OML/cmm/m/it on input line 6.
LaTeX Font Info: ... okay on input line 6.
LaTeX Font Info: Checking defaults for T1/cmr/m/n on input line 6.
LaTeX Font Info: ... okay on input line 6.
LaTeX Font Info: Checking defaults for OT1/cmr/m/n on input line 6.
LaTeX Font Info: ... okay on input line 6.
LaTeX Font Info: Checking defaults for OMS/cmsy/m/n on input line 6.
LaTeX Font Info: ... okay on input line 6.
LaTeX Font Info: Checking defaults for OMX/cmex/m/n on input line 6.
LaTeX Font Info: ... okay on input line 6.
LaTeX Font Info: Checking defaults for U/cmr/m/n on input line 6.
LaTeX Font Info: ... okay on input line 6.
(/usr/share/texlive/texmf-dist/tex/context/base/supp-pdf.mkii
[Loading MPS to PDF converter (version 2006.09.02).]
\scratchcounter=\count123
\scratchdimen=\dimen158
\scratchbox=\box30
\nofMPsegments=\count124
\nofMParguments=\count125
\everyMPshowfont=\toks29
\MPscratchCnt=\count126
\MPscratchDim=\dimen159
\MPnumerator=\count127
\makeMPintoPDFobject=\count128
\everyMPtoPDFconversion=\toks30
)
! Undefined control sequence.
<recently read> \c at lor@to at ps
l.10 \psaxes
(0,0)(-8,-2)(8,2)
The control sequence at the end of the top line
of your error message was never \def'ed. If you have
misspelled it (e.g., `\hobx'), type `I' and the correct
spelling (e.g., `I\hbox'). Otherwise just continue,
and I'll forget about whatever was undefined.
! Undefined control sequence.
\XC at usec@lor ...string \color@ #1#2\endcsname \@@
\fi \space
l.10 \psaxes
(0,0)(-8,-2)(8,2)
The control sequence at the end of the top line
of your error message was never \def'ed. If you have
misspelled it (e.g., `\hobx'), type `I' and the correct
spelling (e.g., `I\hbox'). Otherwise just continue,
and I'll forget about whatever was undefined.
! Undefined control sequence.
<recently read> \c at lor@to at ps
l.10 \psaxes
(0,0)(-8,-2)(8,2)
The control sequence at the end of the top line
of your error message was never \def'ed. If you have
misspelled it (e.g., `\hobx'), type `I' and the correct
spelling (e.g., `I\hbox'). Otherwise just continue,
and I'll forget about whatever was undefined.
! Undefined control sequence.
\XC at usec@lor ...\expandafter \c at lor@to at ps #1#2\@@
\else \expandafter
\expand...
l.10 \psaxes
(0,0)(-8,-2)(8,2)
The control sequence at the end of the top line
of your error message was never \def'ed. If you have
misspelled it (e.g., `\hobx'), type `I' and the correct
spelling (e.g., `I\hbox'). Otherwise just continue,
and I'll forget about whatever was undefined.
! Undefined control sequence.
<recently read> \c at lor@to at ps
l.10 \psaxes
(0,0)(-8,-2)(8,2)
The control sequence at the end of the top line
of your error message was never \def'ed. If you have
misspelled it (e.g., `\hobx'), type `I' and the correct
spelling (e.g., `I\hbox'). Otherwise just continue,
and I'll forget about whatever was undefined.
! Undefined control sequence.
\XC at usec@lor ...string \color@ #1#2\endcsname \@@
\fi \space
l.10 \psaxes
(0,0)(-8,-2)(8,2)
The control sequence at the end of the top line
of your error message was never \def'ed. If you have
misspelled it (e.g., `\hobx'), type `I' and the correct
spelling (e.g., `I\hbox'). Otherwise just continue,
and I'll forget about whatever was undefined.
! Undefined control sequence.
<recently read> \c at lor@to at ps
l.11 \psplot
[linecolor=red, linewidth=2pt]%
The control sequence at the end of the top line
of your error message was never \def'ed. If you have
misspelled it (e.g., `\hobx'), type `I' and the correct
spelling (e.g., `I\hbox'). Otherwise just continue,
and I'll forget about whatever was undefined.
! Undefined control sequence.
\XC at usec@lor ...string \color@ #1#2\endcsname \@@
\fi \space
l.11 \psplot
[linecolor=red, linewidth=2pt]%
The control sequence at the end of the top line
of your error message was never \def'ed. If you have
misspelled it (e.g., `\hobx'), type `I' and the correct
spelling (e.g., `I\hbox'). Otherwise just continue,
and I'll forget about whatever was undefined.
! Undefined control sequence.
<recently read> \c at lor@to at ps
l.11 \psplot
[linecolor=red, linewidth=2pt]%
The control sequence at the end of the top line
of your error message was never \def'ed. If you have
misspelled it (e.g., `\hobx'), type `I' and the correct
spelling (e.g., `I\hbox'). Otherwise just continue,
and I'll forget about whatever was undefined.
! Undefined control sequence.
\XC at usec@lor ...\expandafter \c at lor@to at ps #1#2\@@
\else \expandafter
\expand...
l.11 \psplot
[linecolor=red, linewidth=2pt]%
The control sequence at the end of the top line
of your error message was never \def'ed. If you have
misspelled it (e.g., `\hobx'), type `I' and the correct
spelling (e.g., `I\hbox'). Otherwise just continue,
and I'll forget about whatever was undefined.
! Undefined control sequence.
<recently read> \c at lor@to at ps
l.11 \psplot
[linecolor=red, linewidth=2pt]%
The control sequence at the end of the top line
of your error message was never \def'ed. If you have
misspelled it (e.g., `\hobx'), type `I' and the correct
spelling (e.g., `I\hbox'). Otherwise just continue,
and I'll forget about whatever was undefined.
! Undefined control sequence.
\XC at usec@lor ...\expandafter \c at lor@to at ps #1#2\@@
\else \expandafter
\expand...
l.11 \psplot
[linecolor=red, linewidth=2pt]%
The control sequence at the end of the top line
of your error message was never \def'ed. If you have
misspelled it (e.g., `\hobx'), type `I' and the correct
spelling (e.g., `I\hbox'). Otherwise just continue,
and I'll forget about whatever was undefined.
! Undefined control sequence.
<recently read> \c at lor@to at ps
l.11 \psplot
[linecolor=red, linewidth=2pt]%
The control sequence at the end of the top line
of your error message was never \def'ed. If you have
misspelled it (e.g., `\hobx'), type `I' and the correct
spelling (e.g., `I\hbox'). Otherwise just continue,
and I'll forget about whatever was undefined.
! Undefined control sequence.
\XC at usec@lor ...\expandafter \c at lor@to at ps #1#2\@@
\else \expandafter
\expand...
l.11 \psplot
[linecolor=red, linewidth=2pt]%
The control sequence at the end of the top line
of your error message was never \def'ed. If you have
misspelled it (e.g., `\hobx'), type `I' and the correct
spelling (e.g., `I\hbox'). Otherwise just continue,
and I'll forget about whatever was undefined.
! Undefined control sequence.
<recently read> \c at lor@to at ps
l.11 \psplot
[linecolor=red, linewidth=2pt]%
The control sequence at the end of the top line
of your error message was never \def'ed. If you have
misspelled it (e.g., `\hobx'), type `I' and the correct
spelling (e.g., `I\hbox'). Otherwise just continue,
and I'll forget about whatever was undefined.
! Undefined control sequence.
\XC at usec@lor ...\expandafter \c at lor@to at ps #1#2\@@
\else \expandafter
\expand...
l.11 \psplot
[linecolor=red, linewidth=2pt]%
The control sequence at the end of the top line
of your error message was never \def'ed. If you have
misspelled it (e.g., `\hobx'), type `I' and the correct
spelling (e.g., `I\hbox'). Otherwise just continue,
and I'll forget about whatever was undefined.
! Undefined control sequence.
<recently read> \c at lor@to at ps
l.11 \psplot
[linecolor=red, linewidth=2pt]%
The control sequence at the end of the top line
of your error message was never \def'ed. If you have
misspelled it (e.g., `\hobx'), type `I' and the correct
spelling (e.g., `I\hbox'). Otherwise just continue,
and I'll forget about whatever was undefined.
! Undefined control sequence.
\XC at usec@lor ...\expandafter \c at lor@to at ps #1#2\@@
\else \expandafter
\expand...
l.11 \psplot
[linecolor=red, linewidth=2pt]%
The control sequence at the end of the top line
of your error message was never \def'ed. If you have
misspelled it (e.g., `\hobx'), type `I' and the correct
spelling (e.g., `I\hbox'). Otherwise just continue,
and I'll forget about whatever was undefined.
! Undefined control sequence.
<recently read> \c at lor@to at ps
l.11 \psplot
[linecolor=red, linewidth=2pt]%
The control sequence at the end of the top line
of your error message was never \def'ed. If you have
misspelled it (e.g., `\hobx'), type `I' and the correct
spelling (e.g., `I\hbox'). Otherwise just continue,
and I'll forget about whatever was undefined.
! Undefined control sequence.
\XC at usec@lor ...\expandafter \c at lor@to at ps #1#2\@@
\else \expandafter
\expand...
l.11 \psplot
[linecolor=red, linewidth=2pt]%
The control sequence at the end of the top line
of your error message was never \def'ed. If you have
misspelled it (e.g., `\hobx'), type `I' and the correct
spelling (e.g., `I\hbox'). Otherwise just continue,
and I'll forget about whatever was undefined.
! Undefined control sequence.
<recently read> \c at lor@to at ps
l.11 \psplot
[linecolor=red, linewidth=2pt]%
The control sequence at the end of the top line
of your error message was never \def'ed. If you have
misspelled it (e.g., `\hobx'), type `I' and the correct
spelling (e.g., `I\hbox'). Otherwise just continue,
and I'll forget about whatever was undefined.
! Undefined control sequence.
\XC at usec@lor ...\expandafter \c at lor@to at ps #1#2\@@
\else \expandafter
\expand...
l.11 \psplot
[linecolor=red, linewidth=2pt]%
The control sequence at the end of the top line
of your error message was never \def'ed. If you have
misspelled it (e.g., `\hobx'), type `I' and the correct
spelling (e.g., `I\hbox'). Otherwise just continue,
and I'll forget about whatever was undefined.
! Undefined control sequence.
<recently read> \c at lor@to at ps
l.11 \psplot
[linecolor=red, linewidth=2pt]%
The control sequence at the end of the top line
of your error message was never \def'ed. If you have
misspelled it (e.g., `\hobx'), type `I' and the correct
spelling (e.g., `I\hbox'). Otherwise just continue,
and I'll forget about whatever was undefined.
! Undefined control sequence.
\XC at usec@lor ...\expandafter \c at lor@to at ps #1#2\@@
\else \expandafter
\expand...
l.11 \psplot
[linecolor=red, linewidth=2pt]%
The control sequence at the end of the top line
of your error message was never \def'ed. If you have
misspelled it (e.g., `\hobx'), type `I' and the correct
spelling (e.g., `I\hbox'). Otherwise just continue,
and I'll forget about whatever was undefined.
! Undefined control sequence.
<recently read> \c at lor@to at ps
l.11 \psplot
[linecolor=red, linewidth=2pt]%
The control sequence at the end of the top line
of your error message was never \def'ed. If you have
misspelled it (e.g., `\hobx'), type `I' and the correct
spelling (e.g., `I\hbox'). Otherwise just continue,
and I'll forget about whatever was undefined.
! Undefined control sequence.
\XC at usec@lor ...\expandafter \c at lor@to at ps #1#2\@@
\else \expandafter
\expand...
l.11 \psplot
[linecolor=red, linewidth=2pt]%
The control sequence at the end of the top line
of your error message was never \def'ed. If you have
misspelled it (e.g., `\hobx'), type `I' and the correct
spelling (e.g., `I\hbox'). Otherwise just continue,
and I'll forget about whatever was undefined.
! Undefined control sequence.
<recently read> \c at lor@to at ps
l.11 \psplot
[linecolor=red, linewidth=2pt]%
The control sequence at the end of the top line
of your error message was never \def'ed. If you have
misspelled it (e.g., `\hobx'), type `I' and the correct
spelling (e.g., `I\hbox'). Otherwise just continue,
and I'll forget about whatever was undefined.
! Undefined control sequence.
\XC at usec@lor ...\expandafter \c at lor@to at ps #1#2\@@
\else \expandafter
\expand...
l.11 \psplot
[linecolor=red, linewidth=2pt]%
The control sequence at the end of the top line
of your error message was never \def'ed. If you have
misspelled it (e.g., `\hobx'), type `I' and the correct
spelling (e.g., `I\hbox'). Otherwise just continue,
and I'll forget about whatever was undefined.
! Undefined control sequence.
<recently read> \c at lor@to at ps
l.11 \psplot
[linecolor=red, linewidth=2pt]%
The control sequence at the end of the top line
of your error message was never \def'ed. If you have
misspelled it (e.g., `\hobx'), type `I' and the correct
spelling (e.g., `I\hbox'). Otherwise just continue,
and I'll forget about whatever was undefined.
! Undefined control sequence.
\XC at usec@lor ...\expandafter \c at lor@to at ps #1#2\@@
\else \expandafter
\expand...
l.11 \psplot
[linecolor=red, linewidth=2pt]%
The control sequence at the end of the top line
of your error message was never \def'ed. If you have
misspelled it (e.g., `\hobx'), type `I' and the correct
spelling (e.g., `I\hbox'). Otherwise just continue,
and I'll forget about whatever was undefined.
! Undefined control sequence.
<recently read> \c at lor@to at ps
l.11 \psplot
[linecolor=red, linewidth=2pt]%
The control sequence at the end of the top line
of your error message was never \def'ed. If you have
misspelled it (e.g., `\hobx'), type `I' and the correct
spelling (e.g., `I\hbox'). Otherwise just continue,
and I'll forget about whatever was undefined.
! Undefined control sequence.
\XC at usec@lor ...\expandafter \c at lor@to at ps #1#2\@@
\else \expandafter
\expand...
l.11 \psplot
[linecolor=red, linewidth=2pt]%
The control sequence at the end of the top line
of your error message was never \def'ed. If you have
misspelled it (e.g., `\hobx'), type `I' and the correct
spelling (e.g., `I\hbox'). Otherwise just continue,
and I'll forget about whatever was undefined.
! Undefined control sequence.
<recently read> \c at lor@to at ps
l.11 \psplot
[linecolor=red, linewidth=2pt]%
The control sequence at the end of the top line
of your error message was never \def'ed. If you have
misspelled it (e.g., `\hobx'), type `I' and the correct
spelling (e.g., `I\hbox'). Otherwise just continue,
and I'll forget about whatever was undefined.
! Undefined control sequence.
\XC at usec@lor ...\expandafter \c at lor@to at ps #1#2\@@
\else \expandafter
\expand...
l.11 \psplot
[linecolor=red, linewidth=2pt]%
The control sequence at the end of the top line
of your error message was never \def'ed. If you have
misspelled it (e.g., `\hobx'), type `I' and the correct
spelling (e.g., `I\hbox'). Otherwise just continue,
and I'll forget about whatever was undefined.
LaTeX Font Info: External font `cmex10' loaded for size
(Font) <7> on input line 11.
LaTeX Font Info: External font `cmex10' loaded for size
(Font) <5> on input line 11.
! Undefined control sequence.
<recently read> \c at lor@to at ps
l.12 ...{x neg -1 atan 180 sub 180 div 3.1416 mul}
The control sequence at the end of the top line
of your error message was never \def'ed. If you have
misspelled it (e.g., `\hobx'), type `I' and the correct
spelling (e.g., `I\hbox'). Otherwise just continue,
and I'll forget about whatever was undefined.
! Undefined control sequence.
\XC at usec@lor ...\expandafter \c at lor@to at ps #1#2\@@
\else \expandafter
\expand...
l.12 ...{x neg -1 atan 180 sub 180 div 3.1416 mul}
The control sequence at the end of the top line
of your error message was never \def'ed. If you have
misspelled it (e.g., `\hobx'), type `I' and the correct
spelling (e.g., `I\hbox'). Otherwise just continue,
and I'll forget about whatever was undefined.
! Undefined control sequence.
<recently read> \c at lor@to at ps
l.12 ...{x neg -1 atan 180 sub 180 div 3.1416 mul}
The control sequence at the end of the top line
of your error message was never \def'ed. If you have
misspelled it (e.g., `\hobx'), type `I' and the correct
spelling (e.g., `I\hbox'). Otherwise just continue,
and I'll forget about whatever was undefined.
! Undefined control sequence.
\XC at usec@lor ...\expandafter \c at lor@to at ps #1#2\@@
\else \expandafter
\expand...
l.12 ...{x neg -1 atan 180 sub 180 div 3.1416 mul}
The control sequence at the end of the top line
of your error message was never \def'ed. If you have
misspelled it (e.g., `\hobx'), type `I' and the correct
spelling (e.g., `I\hbox'). Otherwise just continue,
and I'll forget about whatever was undefined.
Overfull \hbox (125.2439pt too wide) in paragraph at lines 13--14
[][]
[]
! Undefined control sequence.
<recently read> \c at lor@to at ps
l.19 \psaxes
(0,0)(-8,-2)(8,2)
The control sequence at the end of the top line
of your error message was never \def'ed. If you have
misspelled it (e.g., `\hobx'), type `I' and the correct
spelling (e.g., `I\hbox'). Otherwise just continue,
and I'll forget about whatever was undefined.
! Undefined control sequence.
\XC at usec@lor ...string \color@ #1#2\endcsname \@@
\fi \space
l.19 \psaxes
(0,0)(-8,-2)(8,2)
The control sequence at the end of the top line
of your error message was never \def'ed. If you have
misspelled it (e.g., `\hobx'), type `I' and the correct
spelling (e.g., `I\hbox'). Otherwise just continue,
and I'll forget about whatever was undefined.
! Undefined control sequence.
<recently read> \c at lor@to at ps
l.19 \psaxes
(0,0)(-8,-2)(8,2)
The control sequence at the end of the top line
of your error message was never \def'ed. If you have
misspelled it (e.g., `\hobx'), type `I' and the correct
spelling (e.g., `I\hbox'). Otherwise just continue,
and I'll forget about whatever was undefined.
! Undefined control sequence.
\XC at usec@lor ...\expandafter \c at lor@to at ps #1#2\@@
\else \expandafter
\expand...
l.19 \psaxes
(0,0)(-8,-2)(8,2)
The control sequence at the end of the top line
of your error message was never \def'ed. If you have
misspelled it (e.g., `\hobx'), type `I' and the correct
spelling (e.g., `I\hbox'). Otherwise just continue,
and I'll forget about whatever was undefined.
! Undefined control sequence.
<recently read> \c at lor@to at ps
l.19 \psaxes
(0,0)(-8,-2)(8,2)
The control sequence at the end of the top line
of your error message was never \def'ed. If you have
misspelled it (e.g., `\hobx'), type `I' and the correct
spelling (e.g., `I\hbox'). Otherwise just continue,
and I'll forget about whatever was undefined.
! Undefined control sequence.
\XC at usec@lor ...string \color@ #1#2\endcsname \@@
\fi \space
l.19 \psaxes
(0,0)(-8,-2)(8,2)
The control sequence at the end of the top line
of your error message was never \def'ed. If you have
misspelled it (e.g., `\hobx'), type `I' and the correct
spelling (e.g., `I\hbox'). Otherwise just continue,
and I'll forget about whatever was undefined.
! Undefined control sequence.
<recently read> \c at lor@to at ps
l.20 \parametricplot
[linecolor=red, linewidth=2pt]%
The control sequence at the end of the top line
of your error message was never \def'ed. If you have
misspelled it (e.g., `\hobx'), type `I' and the correct
spelling (e.g., `I\hbox'). Otherwise just continue,
and I'll forget about whatever was undefined.
! Undefined control sequence.
\XC at usec@lor ...string \color@ #1#2\endcsname \@@
\fi \space
l.20 \parametricplot
[linecolor=red, linewidth=2pt]%
The control sequence at the end of the top line
of your error message was never \def'ed. If you have
misspelled it (e.g., `\hobx'), type `I' and the correct
spelling (e.g., `I\hbox'). Otherwise just continue,
and I'll forget about whatever was undefined.
! Undefined control sequence.
<recently read> \c at lor@to at ps
l.20 \parametricplot
[linecolor=red, linewidth=2pt]%
The control sequence at the end of the top line
of your error message was never \def'ed. If you have
misspelled it (e.g., `\hobx'), type `I' and the correct
spelling (e.g., `I\hbox'). Otherwise just continue,
and I'll forget about whatever was undefined.
! Undefined control sequence.
\XC at usec@lor ...\expandafter \c at lor@to at ps #1#2\@@
\else \expandafter
\expand...
l.20 \parametricplot
[linecolor=red, linewidth=2pt]%
The control sequence at the end of the top line
of your error message was never \def'ed. If you have
misspelled it (e.g., `\hobx'), type `I' and the correct
spelling (e.g., `I\hbox'). Otherwise just continue,
and I'll forget about whatever was undefined.
! Undefined control sequence.
<recently read> \c at lor@to at ps
l.20 \parametricplot
[linecolor=red, linewidth=2pt]%
The control sequence at the end of the top line
of your error message was never \def'ed. If you have
misspelled it (e.g., `\hobx'), type `I' and the correct
spelling (e.g., `I\hbox'). Otherwise just continue,
and I'll forget about whatever was undefined.
! Undefined control sequence.
\XC at usec@lor ...\expandafter \c at lor@to at ps #1#2\@@
\else \expandafter
\expand...
l.20 \parametricplot
[linecolor=red, linewidth=2pt]%
The control sequence at the end of the top line
of your error message was never \def'ed. If you have
misspelled it (e.g., `\hobx'), type `I' and the correct
spelling (e.g., `I\hbox'). Otherwise just continue,
and I'll forget about whatever was undefined.
! Undefined control sequence.
<recently read> \c at lor@to at ps
l.20 \parametricplot
[linecolor=red, linewidth=2pt]%
The control sequence at the end of the top line
of your error message was never \def'ed. If you have
misspelled it (e.g., `\hobx'), type `I' and the correct
spelling (e.g., `I\hbox'). Otherwise just continue,
and I'll forget about whatever was undefined.
! Undefined control sequence.
\XC at usec@lor ...\expandafter \c at lor@to at ps #1#2\@@
\else \expandafter
\expand...
l.20 \parametricplot
[linecolor=red, linewidth=2pt]%
The control sequence at the end of the top line
of your error message was never \def'ed. If you have
misspelled it (e.g., `\hobx'), type `I' and the correct
spelling (e.g., `I\hbox'). Otherwise just continue,
and I'll forget about whatever was undefined.
! Undefined control sequence.
<recently read> \c at lor@to at ps
l.20 \parametricplot
[linecolor=red, linewidth=2pt]%
The control sequence at the end of the top line
of your error message was never \def'ed. If you have
misspelled it (e.g., `\hobx'), type `I' and the correct
spelling (e.g., `I\hbox'). Otherwise just continue,
and I'll forget about whatever was undefined.
! Undefined control sequence.
\XC at usec@lor ...\expandafter \c at lor@to at ps #1#2\@@
\else \expandafter
\expand...
l.20 \parametricplot
[linecolor=red, linewidth=2pt]%
The control sequence at the end of the top line
of your error message was never \def'ed. If you have
misspelled it (e.g., `\hobx'), type `I' and the correct
spelling (e.g., `I\hbox'). Otherwise just continue,
and I'll forget about whatever was undefined.
! Undefined control sequence.
<recently read> \c at lor@to at ps
l.20 \parametricplot
[linecolor=red, linewidth=2pt]%
The control sequence at the end of the top line
of your error message was never \def'ed. If you have
misspelled it (e.g., `\hobx'), type `I' and the correct
spelling (e.g., `I\hbox'). Otherwise just continue,
and I'll forget about whatever was undefined.
! Undefined control sequence.
\XC at usec@lor ...\expandafter \c at lor@to at ps #1#2\@@
\else \expandafter
\expand...
l.20 \parametricplot
[linecolor=red, linewidth=2pt]%
The control sequence at the end of the top line
of your error message was never \def'ed. If you have
misspelled it (e.g., `\hobx'), type `I' and the correct
spelling (e.g., `I\hbox'). Otherwise just continue,
and I'll forget about whatever was undefined.
! Undefined control sequence.
<recently read> \c at lor@to at ps
l.20 \parametricplot
[linecolor=red, linewidth=2pt]%
The control sequence at the end of the top line
of your error message was never \def'ed. If you have
misspelled it (e.g., `\hobx'), type `I' and the correct
spelling (e.g., `I\hbox'). Otherwise just continue,
and I'll forget about whatever was undefined.
! Undefined control sequence.
\XC at usec@lor ...\expandafter \c at lor@to at ps #1#2\@@
\else \expandafter
\expand...
l.20 \parametricplot
[linecolor=red, linewidth=2pt]%
The control sequence at the end of the top line
of your error message was never \def'ed. If you have
misspelled it (e.g., `\hobx'), type `I' and the correct
spelling (e.g., `I\hbox'). Otherwise just continue,
and I'll forget about whatever was undefined.
! Undefined control sequence.
<recently read> \c at lor@to at ps
l.20 \parametricplot
[linecolor=red, linewidth=2pt]%
The control sequence at the end of the top line
of your error message was never \def'ed. If you have
misspelled it (e.g., `\hobx'), type `I' and the correct
spelling (e.g., `I\hbox'). Otherwise just continue,
and I'll forget about whatever was undefined.
! Undefined control sequence.
\XC at usec@lor ...\expandafter \c at lor@to at ps #1#2\@@
\else \expandafter
\expand...
l.20 \parametricplot
[linecolor=red, linewidth=2pt]%
The control sequence at the end of the top line
of your error message was never \def'ed. If you have
misspelled it (e.g., `\hobx'), type `I' and the correct
spelling (e.g., `I\hbox'). Otherwise just continue,
and I'll forget about whatever was undefined.
! Undefined control sequence.
<recently read> \c at lor@to at ps
l.20 \parametricplot
[linecolor=red, linewidth=2pt]%
The control sequence at the end of the top line
of your error message was never \def'ed. If you have
misspelled it (e.g., `\hobx'), type `I' and the correct
spelling (e.g., `I\hbox'). Otherwise just continue,
and I'll forget about whatever was undefined.
! Undefined control sequence.
\XC at usec@lor ...\expandafter \c at lor@to at ps #1#2\@@
\else \expandafter
\expand...
l.20 \parametricplot
[linecolor=red, linewidth=2pt]%
The control sequence at the end of the top line
of your error message was never \def'ed. If you have
misspelled it (e.g., `\hobx'), type `I' and the correct
spelling (e.g., `I\hbox'). Otherwise just continue,
and I'll forget about whatever was undefined.
! Undefined control sequence.
<recently read> \c at lor@to at ps
l.20 \parametricplot
[linecolor=red, linewidth=2pt]%
The control sequence at the end of the top line
of your error message was never \def'ed. If you have
misspelled it (e.g., `\hobx'), type `I' and the correct
spelling (e.g., `I\hbox'). Otherwise just continue,
and I'll forget about whatever was undefined.
! Undefined control sequence.
\XC at usec@lor ...\expandafter \c at lor@to at ps #1#2\@@
\else \expandafter
\expand...
l.20 \parametricplot
[linecolor=red, linewidth=2pt]%
The control sequence at the end of the top line
of your error message was never \def'ed. If you have
misspelled it (e.g., `\hobx'), type `I' and the correct
spelling (e.g., `I\hbox'). Otherwise just continue,
and I'll forget about whatever was undefined.
! Undefined control sequence.
<recently read> \c at lor@to at ps
l.20 \parametricplot
[linecolor=red, linewidth=2pt]%
The control sequence at the end of the top line
of your error message was never \def'ed. If you have
misspelled it (e.g., `\hobx'), type `I' and the correct
spelling (e.g., `I\hbox'). Otherwise just continue,
and I'll forget about whatever was undefined.
! Undefined control sequence.
\XC at usec@lor ...\expandafter \c at lor@to at ps #1#2\@@
\else \expandafter
\expand...
l.20 \parametricplot
[linecolor=red, linewidth=2pt]%
The control sequence at the end of the top line
of your error message was never \def'ed. If you have
misspelled it (e.g., `\hobx'), type `I' and the correct
spelling (e.g., `I\hbox'). Otherwise just continue,
and I'll forget about whatever was undefined.
! Undefined control sequence.
<recently read> \c at lor@to at ps
l.20 \parametricplot
[linecolor=red, linewidth=2pt]%
The control sequence at the end of the top line
of your error message was never \def'ed. If you have
misspelled it (e.g., `\hobx'), type `I' and the correct
spelling (e.g., `I\hbox'). Otherwise just continue,
and I'll forget about whatever was undefined.
! Undefined control sequence.
\XC at usec@lor ...\expandafter \c at lor@to at ps #1#2\@@
\else \expandafter
\expand...
l.20 \parametricplot
[linecolor=red, linewidth=2pt]%
The control sequence at the end of the top line
of your error message was never \def'ed. If you have
misspelled it (e.g., `\hobx'), type `I' and the correct
spelling (e.g., `I\hbox'). Otherwise just continue,
and I'll forget about whatever was undefined.
! Undefined control sequence.
<recently read> \c at lor@to at ps
l.20 \parametricplot
[linecolor=red, linewidth=2pt]%
The control sequence at the end of the top line
of your error message was never \def'ed. If you have
misspelled it (e.g., `\hobx'), type `I' and the correct
spelling (e.g., `I\hbox'). Otherwise just continue,
and I'll forget about whatever was undefined.
! Undefined control sequence.
\XC at usec@lor ...\expandafter \c at lor@to at ps #1#2\@@
\else \expandafter
\expand...
l.20 \parametricplot
[linecolor=red, linewidth=2pt]%
The control sequence at the end of the top line
of your error message was never \def'ed. If you have
misspelled it (e.g., `\hobx'), type `I' and the correct
spelling (e.g., `I\hbox'). Otherwise just continue,
and I'll forget about whatever was undefined.
! Undefined control sequence.
<recently read> \c at lor@to at ps
l.20 \parametricplot
[linecolor=red, linewidth=2pt]%
The control sequence at the end of the top line
of your error message was never \def'ed. If you have
misspelled it (e.g., `\hobx'), type `I' and the correct
spelling (e.g., `I\hbox'). Otherwise just continue,
and I'll forget about whatever was undefined.
! Undefined control sequence.
\XC at usec@lor ...\expandafter \c at lor@to at ps #1#2\@@
\else \expandafter
\expand...
l.20 \parametricplot
[linecolor=red, linewidth=2pt]%
The control sequence at the end of the top line
of your error message was never \def'ed. If you have
misspelled it (e.g., `\hobx'), type `I' and the correct
spelling (e.g., `I\hbox'). Otherwise just continue,
and I'll forget about whatever was undefined.
! Undefined control sequence.
<recently read> \c at lor@to at ps
l.21 ...{1.446}{t RadtoDeg dup sin exch cos div t}
The control sequence at the end of the top line
of your error message was never \def'ed. If you have
misspelled it (e.g., `\hobx'), type `I' and the correct
spelling (e.g., `I\hbox'). Otherwise just continue,
and I'll forget about whatever was undefined.
! Undefined control sequence.
\XC at usec@lor ...\expandafter \c at lor@to at ps #1#2\@@
\else \expandafter
\expand...
l.21 ...{1.446}{t RadtoDeg dup sin exch cos div t}
The control sequence at the end of the top line
of your error message was never \def'ed. If you have
misspelled it (e.g., `\hobx'), type `I' and the correct
spelling (e.g., `I\hbox'). Otherwise just continue,
and I'll forget about whatever was undefined.
! Undefined control sequence.
<recently read> \c at lor@to at ps
l.21 ...{1.446}{t RadtoDeg dup sin exch cos div t}
The control sequence at the end of the top line
of your error message was never \def'ed. If you have
misspelled it (e.g., `\hobx'), type `I' and the correct
spelling (e.g., `I\hbox'). Otherwise just continue,
and I'll forget about whatever was undefined.
! Undefined control sequence.
\XC at usec@lor ...\expandafter \c at lor@to at ps #1#2\@@
\else \expandafter
\expand...
l.21 ...{1.446}{t RadtoDeg dup sin exch cos div t}
The control sequence at the end of the top line
of your error message was never \def'ed. If you have
misspelled it (e.g., `\hobx'), type `I' and the correct
spelling (e.g., `I\hbox'). Otherwise just continue,
and I'll forget about whatever was undefined.
Overfull \hbox (125.2439pt too wide) in paragraph at lines 22--23
[][]
[]
Overfull \hbox (27.74675pt too wide) in paragraph at lines 48--48
[] \OT1/cmtt/m/n/10 \psgrid[griddots=10,gridlabels=0pt,
subgriddiv=0, gridcolo
r=black!20][]
[]
Overfull \hbox (27.74675pt too wide) in paragraph at lines 48--48
[] \OT1/cmtt/m/n/10 \psgrid[griddots=10,gridlabels=0pt,
subgriddiv=0, gridcolo
r=black!20][]
[]
[1
Non-PDF special ignored!
Non-PDF special ignored!
Non-PDF special ignored!
Non-PDF special ignored!
Non-PDF special ignored!
Non-PDF special ignored!
Non-PDF special ignored!
Non-PDF special ignored!
Non-PDF special ignored!
Non-PDF special ignored!
Non-PDF special ignored!
Non-PDF special ignored!
Non-PDF special ignored!
Non-PDF special
ignored!{/usr/share/texlive/texmf-dist/fonts/map/pdftex/updmap/
pdftex.map}
Non-PDF special ignored!
Non-PDF special ignored!
Non-PDF special ignored!
Non-PDF special ignored!
Non-PDF special ignored!
Non-PDF special ignored!
Non-PDF special ignored!
Non-PDF special ignored!
Non-PDF special ignored!] (./psplot1.aux) )
Here is how much of TeX's memory you used:
8585 strings out of 494379
152842 string characters out of 6169016
227130 words of memory out of 5000000
11784 multiletter control sequences out of 15000+600000
3808 words of font info for 15 fonts, out of 8000000 for 9000
472 hyphenation exceptions out of 8191
37i,5n,52p,406b,224s stack positions out of
5000i,500n,10000p,200000b,80000s
</usr/share/texlive/texmf-dist/fonts
/type1/public/amsfonts/cm/cmr10.pfb></usr/share/texlive/texmf-dist/fonts/type1/
public/amsfonts/cm/cmsy10.pfb></usr/share/texlive/texmf-dist/fonts/type1/public
/amsfonts/cm/cmtt10.pfb>
Output written on psplot1.pdf (1 page, 33187 bytes).
PDF statistics:
20 PDF objects out of 1000 (max. 8388607)
13 compressed objects within 1 object stream
0 named destinations out of 1000 (max. 500000)
1 words of extra memory for PDF output out of 10000 (max. 10000000)
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://tug.org/pipermail/pstricks/attachments/20151005/c976facd/attachment-0001.html>
More information about the PSTricks
mailing list