[OS X TeX] How to get xasy to run?

[William Slough]

Murray,

As a postscript to my earlier comment, here's some additional information.
Section 11.1 of the Asymptote manual indicates which Python packages are
required. When I used "pip3" to install those, this seemed to be all that
was needed to allow my xasy command to run.

Hope this helps.

Bill Slough

On Thu, Aug 20, 2020 at 5:20 PM William Slough <wslough at gmail.com> wrote:

> Murray,
>
> My guess is that the GUI version, xasy, is not necessarily expected to run
> "out of the box" from a MacTeX installation, even though the script to
> start it is present. For what it's worth, I'm still on Mojave and when I
> tried to run xasy I got a slightly different error when try to run xasy:
>
> Traceback (most recent call last):
>   File "/Library/TeX/texbin/xasy", line 4, in <module>
>     import PyQt5.QtWidgets as Qw
> ModuleNotFoundError: No module named 'PyQt5'
>
> This may not be the answer you are looking for, but I think the simplest
> way to get it to run is to install it via Macports. If you already use
> Macports, this will probably be a simple matter to do a "port install."
> (Using Macports is one of the recommended approaches for OS X given on the
> Asymptote site. The other is compiling from source, which could be a
> daunting procedure.)
>
> Bill Slough
> Eastern Illinois University
> Mathematics and Computer Science Department (emeritus)
> Charleston, IL
>
>
> On Thu, Aug 20, 2020 at 10:51 AM Murray Eisenberg <
> murrayeisenberg at gmail.com> wrote:
>
>> My understanding is that the executable asymptote command-line binary is
>> included with MacTeX/TeXLive (2020), along with support packages to use it
>> with TeX. That executable seems to be asy in /Library/TeX/texbin (actually,
>> tracing the link, in /usr/local/texlive/2020/bin/x86_64-darwin). And I
>> can get that to work with the TeXShop Asymptote engine.
>>
>> MacTeX/TeXLive also include the GUI app xasy, which I want to be able to
>> use without going through TeXShop
>>
>> QUESTION: How can I get xasy to work (under macOS Catalina)?
>>
>> If I try to execute xasy at the Terminal command line, I get the error
>> message show below.
>> I did look at the troubleshooting link referenced in the error but still
>> do not see how to proceed.
>>
>> I did run the 3-line python script, provided at the end of the
>> troubleshooting page, to check environmental variables. But I don’t have a
>> clue still as to what could be wrong.
>>
>> $ xasy
>> Traceback (most recent call last):
>>   File
>> "/opt/anaconda3/lib/python3.7/site-packages/numpy/core/__init__.py", line
>> 22, in <module>
>>     from . import multiarray
>>   File
>> "/opt/anaconda3/lib/python3.7/site-packages/numpy/core/multiarray.py", line
>> 12, in <module>
>>     from . import overrides
>>   File
>> "/opt/anaconda3/lib/python3.7/site-packages/numpy/core/overrides.py", line
>> 7, in <module>
>>     from numpy.core._multiarray_umath import (
>> ImportError:
>> dlopen(/opt/anaconda3/lib/python3.7/site-packages/numpy/core/_
>> multiarray_umath.cpython-37m-darwin.so, 2): Library not loaded:
>> @rpath/libopenblas.dylib
>>   Referenced from: /opt/anaconda3/lib/python3.7/site-packages/numpy/core/_
>> multiarray_umath.cpython-37m-darwin.so
>>   Reason: image not found
>>
>> During handling of the above exception, another exception occurred:
>>
>> Traceback (most recent call last):
>>   File "/Library/TeX/texbin/xasy", line 6, in <module>
>>     from Window1 import MainWindow1
>>   File "/usr/local/texlive/2020/texmf-dist/asymptote/GUI/Window1.py",
>> line 10, in <module>
>>     import numpy as np
>>   File "/opt/anaconda3/lib/python3.7/site-packages/numpy/__init__.py",
>> line 140, in <module>
>>     from . import core
>>   File
>> "/opt/anaconda3/lib/python3.7/site-packages/numpy/core/__init__.py", line
>> 48, in <module>
>>     raise ImportError(msg)
>> ImportError:
>>
>> IMPORTANT: PLEASE READ THIS FOR ADVICE ON HOW TO SOLVE THIS ISSUE!
>>
>> Importing the numpy C-extensions failed. This error can happen for
>> many reasons, often due to issues with your setup or how NumPy was
>> installed.
>>
>> We have compiled some common reasons and troubleshooting tips at:
>>
>>     https://numpy.org/devdocs/user/troubleshooting-importerror.html
>>
>> Please note and check the following:
>>
>>   * The Python version is: Python3.7 from "/opt/anaconda3/bin/python3"
>>   * The NumPy version is: "1.19.1"
>>
>> and make sure that they are the versions you expect.
>> Please carefully study the documentation linked above for further help.
>>
>> Original error was:
>> dlopen(/opt/anaconda3/lib/python3.7/site-packages/numpy/core/_
>> multiarray_umath.cpython-37m-darwin.so, 2): Library not loaded:
>> @rpath/libopenblas.dylib
>>   Referenced from: /opt/anaconda3/lib/python3.7/site-packages/numpy/core/_
>> multiarray_umath.cpython-37m-darwin.so
>>   Reason: image not found
>>
>>
>> ---
>> Murray Eisenberg murrayeisenberg at gmail.com
>> 503 King Farm Blvd #101 Home (240)-246-7240
>> Rockville, MD 20850-6667 Mobile (413)-427-5334
>>
>>
>> ----------- Please Consult the Following Before Posting -----------
>> TeX FAQ: http://www.tex.ac.uk/faq
>> List Reminders and Etiquette: https://sites.esm.psu.edu/~gray/tex/
>> List Archives: http://dir.gmane.org/gmane.comp.tex.macosx
>>                 https://email.esm.psu.edu/pipermail/macosx-tex/
>> TeX on Mac OS X Website: http://mactex-wiki.tug.org/
>> List Info: https://email.esm.psu.edu/mailman/listinfo/macosx-tex
>>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://tug.org/pipermail/macostex-archives/attachments/20200820/6f2fa59e/attachment.html>
-------------- next part --------------
----------- Please Consult the Following Before Posting -----------
TeX FAQ: http://www.tex.ac.uk/faq
List Reminders and Etiquette: https://sites.esm.psu.edu/~gray/tex/
List Archives: http://dir.gmane.org/gmane.comp.tex.macosx
                https://email.esm.psu.edu/pipermail/macosx-tex/
TeX on Mac OS X Website: http://mactex-wiki.tug.org/
List Info: https://email.esm.psu.edu/mailman/listinfo/macosx-tex