[OS X TeX] LaTeXiT! problem
Michael Sharpe
msharpe at ucsd.edu
Wed Jul 22 19:58:59 CEST 2009
I do see some of the same issues you do, though I do get correct
output from latexit. To investigate what's going on, I suggest the
following.
1. Copy latexit-1.pdf, latexit-1.tex and latexit-1-2.tex in the
temporary folder to another folder . Does latexit-1.pdf display a
typeset $\pi$?
2. Take a at latexit-1-2.tex. Edit the papersize parameters so that
each is followed by pt. This will get rid of the Illegal unit of
measure error messages.
3. I do get the error message 'Option `bb' does not make sense' from
pdftex.def, and when I try to run pdftex on latexit-1-2.tex, I get no
visible output.
4. If I modify latexit-1-2.tex to remove all parameters from
\includegraphics*, so that the line reads simply
\includegraphics*{latexit-1.pdf}
then I get output with a visible $\pi$, but incorrect size.
Perhaps you should post the contents of latexit-1-2.tex and
latexit-1.pdf so that others can compare the files to their own.
Best of luck with this.
Michael
On Jul 22, 2009, at 6:49 AM, Rowland McDonnell wrote:
> Hello,
>
> I am trying to get the LaTeXiT! external equation editor for Macs
> working.
>
> I have just installed MacTeX 2008.
>
> (I have rebuilt the supplied formats, but the fmtutil.cnf file used to
> do so used the stock settings for the standard formats and I have
> checked by hand to ensure that only files supplied with MacTeX 2008
> were
> used to re-create the stock formats - not one of the stock formats was
> created with any file that I've edited or supplied in my local texmf
> trees.)
>
> I have checked that LaTeXiT! is using only tex live TeX formats and
> only
> tex live files.
>
> I have tried to use LaTeXiT! to typeset some free-standing equations.
> All I get is blank output when I try. LaTeXiT! uses pdfLaTeX to
> generate pdf file output but the pdf files are blank.
>
> The logs from the pdfLaTeX runs imply that there is something wrong
> with
> the underlying TeX installation.
>
> I have emailed LaTeXiT!'s author: he suggests that there is something
> wrong with the TeX distro that I'm using because of these `strange
> errors' (his words) in the logs I sent him:
>
> /usr/local/texlive/2008/texmf-dist/tex/latex/geometry/geometry.sty:
> 856:
> Illegal unit of measure (pt inserted).
> Package pdftex.def Warning: Option `bb' does not make sense,
> (pdftex.def) using `viewport' instead on input line 23.
>
> My questions are these:
>
> 1) Is there some stock configuration task which I should have done to
> fix this problem?
>
> 1a) Or does anyone here have a better idea?
>
> 2) And why, when I type `kpsewhich geometry.cfg', do I get:
>
> /usr/local/texlive/2008/texmf-dist/tex/xelatex/xetexconfig/
> geometry.cfg?
>
> That is the version loaded when LaTeXiT! runs according to LaTeXiT!'s
> logs.
>
> Any hints or clues would be very welcome - the author of LaTeXiT!
> seems
> as puzzled as I am by this one.
>
> And yes, normal operations with MacTeX 2008 work entirely as one would
> expect. I can LaTeX files to my heart's content using TeXShop (my
> formats or the stock formats) and all works normally.
>
> Thank you,
> Rowland.
>
>
> P.S. Below is one of the two logs generated by a LaTeXiT! run - this
> log is the one with the strange errors. I'm afraid that it *IS* a
> minimum example - that's the log generated with `standard settings
> plus
> minimal user input' (a \pi and nothing more).
>
> This is pdfTeXk, Version 3.1415926-1.40.9 (Web2C 7.5.7)
> (format=pdflatex
> 2009.7.21) 22 JUL 2009 01:08
> entering extended mode
> file:line:error style messages enabled.
> %&-line parsing enabled.
> **/private/var/tmp/folders.501/TemporaryItems/latexit-1.16.1/
> latexit-1-
> baseline
> .tex
>
> (/private/var/tmp/folders.501/TemporaryItems/latexit-1.16.1/latexit-1-
> baseline.
> tex
> LaTeX2e <2005/12/01>
> Babel <v3.8h> and hyphenation patterns for english, usenglishmax,
> dumylang, noh
> yphenation, german-x-2008-06-18, ngerman-x-2008-06-18, ancientgreek,
> ibycus, ar
> abic, basque, bulgarian, catalan, pinyin, coptic, croatian, czech,
> danish, dutc
> h, esperanto, estonian, farsi, finnish, french, galician, german,
> ngerman, mono
> greek, greek, hungarian, icelandic, indonesian, interlingua, irish,
> italian, la
> tin, lithuanian, mongolian, mongolian2a, bokmal, nynorsk, polish,
> portuguese, r
> omanian, russian, sanskrit, serbian, slovak, slovenian, spanish,
> swedish, turki
> sh, ukenglish, ukrainian, uppersorbian, welsh, loaded.
> (/usr/local/texlive/2008/texmf-dist/tex/latex/base/article.cls
> Document Class: article 2005/09/16 v1.4f Standard LaTeX document class
> (/usr/local/texlive/2008/texmf-dist/tex/latex/base/size10.clo
> File: size10.clo 2005/09/16 v1.4f Standard LaTeX file (size option)
> )
> \c at part=\count79
> \c at section=\count80
> \c at subsection=\count81
> \c at subsubsection=\count82
> \c at paragraph=\count83
> \c at subparagraph=\count84
> \c at figure=\count85
> \c at table=\count86
> \abovecaptionskip=\skip41
> \belowcaptionskip=\skip42
> \bibindent=\dimen102
> )
> (/usr/local/texlive/2008/texmf-dist/tex/latex/graphics/color.sty
> Package: color 2005/11/14 v1.0j Standard LaTeX Color (DPC)
>
> (/usr/local/texlive/2008/texmf/tex/latex/config/color.cfg
> File: color.cfg 2007/01/18 v1.5 color configuration of teTeX/TeXLive
> )
> Package color Info: Driver file: pdftex.def on input line 130.
>
> (/usr/local/texlive/2008/texmf-dist/tex/latex/pdftex-def/pdftex.def
> File: pdftex.def 2008/09/08 v0.04l Graphics/color for pdfTeX
> \Gread at gobject=\count87
> ))
> (/usr/local/texlive/2008/texmf-dist/tex/latex/amsfonts/amssymb.sty
> Package: amssymb 2002/01/22 v2.2d
>
> (/usr/local/texlive/2008/texmf-dist/tex/latex/amsfonts/amsfonts.sty
> Package: amsfonts 2001/10/25 v2.2f
> \@emptytoks=\toks14
> \symAMSa=\mathgroup4
> \symAMSb=\mathgroup5
> LaTeX Font Info: Overwriting math alphabet `\mathfrak' in version
> `bold'
> (Font) U/euf/m/n --> U/euf/b/n on input line 132.
> ))
> (/usr/local/texlive/2008/texmf-dist/tex/latex/amsmath/amsmath.sty
> Package: amsmath 2000/07/18 v2.13 AMS math features
> \@mathmargin=\skip43
>
> For additional information on amsmath, use the `?' option.
> (/usr/local/texlive/2008/texmf-dist/tex/latex/amsmath/amstext.sty
> Package: amstext 2000/06/29 v2.01
>
> (/usr/local/texlive/2008/texmf-dist/tex/latex/amsmath/amsgen.sty
> File: amsgen.sty 1999/11/30 v2.0
> \@emptytoks=\toks15
> \ex@=\dimen103
> ))
> (/usr/local/texlive/2008/texmf-dist/tex/latex/amsmath/amsbsy.sty
> Package: amsbsy 1999/11/29 v1.2d
> \pmbraise@=\dimen104
> )
> (/usr/local/texlive/2008/texmf-dist/tex/latex/amsmath/amsopn.sty
> Package: amsopn 1999/12/14 v2.01 operator names
> )
> \inf at bad=\count88
> LaTeX Info: Redefining \frac on input line 211.
> \uproot@=\count89
> \leftroot@=\count90
> LaTeX Info: Redefining \overline on input line 307.
> \classnum@=\count91
> \DOTSCASE@=\count92
> LaTeX Info: Redefining \ldots on input line 379.
> LaTeX Info: Redefining \dots on input line 382.
> LaTeX Info: Redefining \cdots on input line 467.
> \Mathstrutbox@=\box26
> \strutbox@=\box27
> \big at size=\dimen105
> LaTeX Font Info: Redeclaring font encoding OML on input line 567.
> LaTeX Font Info: Redeclaring font encoding OMS on input line 568.
> \macc at depth=\count93
> \c at MaxMatrixCols=\count94
> \dotsspace@=\muskip10
> \c at parentequation=\count95
> \dspbrk at lvl=\count96
> \tag at help=\toks16
> \row@=\count97
> \column@=\count98
> \maxfields@=\count99
> \andhelp@=\toks17
> \eqnshift@=\dimen106
> \alignsep@=\dimen107
> \tagshift@=\dimen108
> \tagwidth@=\dimen109
> \totwidth@=\dimen110
> \lineht@=\dimen111
> \@envbody=\toks18
> \multlinegap=\skip44
> \multlinetaggap=\skip45
> \mathdisplay at stack=\toks19
> LaTeX Info: Redefining \[ on input line 2666.
> LaTeX Info: Redefining \] on input line 2667.
> )
> (/usr/local/texlive/2008/texmf-dist/tex/latex/base/inputenc.sty
> Package: inputenc 2006/05/05 v1.1b Input encoding file
> \inpenc at prehook=\toks20
> \inpenc at posthook=\toks21
>
> (/usr/local/texlive/2008/texmf-dist/tex/latex/base/utf8.def
> File: utf8.def 2006/03/30 v1.1i UTF-8 support for inputenc
> Now handling font encoding OML ...
> ... no UTF-8 mapping file for font encoding OML
> Now handling font encoding T1 ...
> ... processing UTF-8 mapping file for font encodingT1
>
> (/usr/local/texlive/2008/texmf-dist/tex/latex/base/t1enc.dfu
> File: t1enc.dfu 2006/03/30 v1.1i UTF-8 support for inputenc
> defining Unicode char U+00A1 (decimal 161)
> defining Unicode char U+00A3 (decimal 163)
> defining Unicode char U+00AB (decimal 171)
> defining Unicode char U+00BB (decimal 187)
> defining Unicode char U+00BF (decimal 191)
> defining Unicode char U+00C0 (decimal 192)
> defining Unicode char U+00C1 (decimal 193)
> defining Unicode char U+00C2 (decimal 194)
> defining Unicode char U+00C3 (decimal 195)
> defining Unicode char U+00C4 (decimal 196)
> defining Unicode char U+00C5 (decimal 197)
> defining Unicode char U+00C6 (decimal 198)
> defining Unicode char U+00C7 (decimal 199)
> defining Unicode char U+00C8 (decimal 200)
> defining Unicode char U+00C9 (decimal 201)
> defining Unicode char U+00CA (decimal 202)
> defining Unicode char U+00CB (decimal 203)
> defining Unicode char U+00CC (decimal 204)
> defining Unicode char U+00CD (decimal 205)
> defining Unicode char U+00CE (decimal 206)
> defining Unicode char U+00CF (decimal 207)
> defining Unicode char U+00D0 (decimal 208)
> defining Unicode char U+00D1 (decimal 209)
> defining Unicode char U+00D2 (decimal 210)
> defining Unicode char U+00D3 (decimal 211)
> defining Unicode char U+00D4 (decimal 212)
> defining Unicode char U+00D5 (decimal 213)
> defining Unicode char U+00D6 (decimal 214)
> defining Unicode char U+00D8 (decimal 216)
> defining Unicode char U+00D9 (decimal 217)
> defining Unicode char U+00DA (decimal 218)
> defining Unicode char U+00DB (decimal 219)
> defining Unicode char U+00DC (decimal 220)
> defining Unicode char U+00DD (decimal 221)
> defining Unicode char U+00DE (decimal 222)
> defining Unicode char U+00DF (decimal 223)
> defining Unicode char U+00E0 (decimal 224)
> defining Unicode char U+00E1 (decimal 225)
> defining Unicode char U+00E2 (decimal 226)
> defining Unicode char U+00E3 (decimal 227)
> defining Unicode char U+00E4 (decimal 228)
> defining Unicode char U+00E5 (decimal 229)
> defining Unicode char U+00E6 (decimal 230)
> defining Unicode char U+00E7 (decimal 231)
> defining Unicode char U+00E8 (decimal 232)
> defining Unicode char U+00E9 (decimal 233)
> defining Unicode char U+00EA (decimal 234)
> defining Unicode char U+00EB (decimal 235)
> defining Unicode char U+00EC (decimal 236)
> defining Unicode char U+00ED (decimal 237)
> defining Unicode char U+00EE (decimal 238)
> defining Unicode char U+00EF (decimal 239)
> defining Unicode char U+00F0 (decimal 240)
> defining Unicode char U+00F1 (decimal 241)
> defining Unicode char U+00F2 (decimal 242)
> defining Unicode char U+00F3 (decimal 243)
> defining Unicode char U+00F4 (decimal 244)
> defining Unicode char U+00F5 (decimal 245)
> defining Unicode char U+00F6 (decimal 246)
> defining Unicode char U+00F8 (decimal 248)
> defining Unicode char U+00F9 (decimal 249)
> defining Unicode char U+00FA (decimal 250)
> defining Unicode char U+00FB (decimal 251)
> defining Unicode char U+00FC (decimal 252)
> defining Unicode char U+00FD (decimal 253)
> defining Unicode char U+00FE (decimal 254)
> defining Unicode char U+00FF (decimal 255)
> defining Unicode char U+0102 (decimal 258)
> defining Unicode char U+0103 (decimal 259)
> defining Unicode char U+0104 (decimal 260)
> defining Unicode char U+0105 (decimal 261)
> defining Unicode char U+0106 (decimal 262)
> defining Unicode char U+0107 (decimal 263)
> defining Unicode char U+010C (decimal 268)
> defining Unicode char U+010D (decimal 269)
> defining Unicode char U+010E (decimal 270)
> defining Unicode char U+010F (decimal 271)
> defining Unicode char U+0110 (decimal 272)
> defining Unicode char U+0111 (decimal 273)
> defining Unicode char U+0118 (decimal 280)
> defining Unicode char U+0119 (decimal 281)
> defining Unicode char U+011A (decimal 282)
> defining Unicode char U+011B (decimal 283)
> defining Unicode char U+011E (decimal 286)
> defining Unicode char U+011F (decimal 287)
> defining Unicode char U+0130 (decimal 304)
> defining Unicode char U+0131 (decimal 305)
> defining Unicode char U+0132 (decimal 306)
> defining Unicode char U+0133 (decimal 307)
> defining Unicode char U+0139 (decimal 313)
> defining Unicode char U+013A (decimal 314)
> defining Unicode char U+013D (decimal 317)
> defining Unicode char U+013E (decimal 318)
> defining Unicode char U+0141 (decimal 321)
> defining Unicode char U+0142 (decimal 322)
> defining Unicode char U+0143 (decimal 323)
> defining Unicode char U+0144 (decimal 324)
> defining Unicode char U+0147 (decimal 327)
> defining Unicode char U+0148 (decimal 328)
> defining Unicode char U+014A (decimal 330)
> defining Unicode char U+014B (decimal 331)
> defining Unicode char U+0150 (decimal 336)
> defining Unicode char U+0151 (decimal 337)
> defining Unicode char U+0152 (decimal 338)
> defining Unicode char U+0153 (decimal 339)
> defining Unicode char U+0154 (decimal 340)
> defining Unicode char U+0155 (decimal 341)
> defining Unicode char U+0158 (decimal 344)
> defining Unicode char U+0159 (decimal 345)
> defining Unicode char U+015A (decimal 346)
> defining Unicode char U+015B (decimal 347)
> defining Unicode char U+015E (decimal 350)
> defining Unicode char U+015F (decimal 351)
> defining Unicode char U+0160 (decimal 352)
> defining Unicode char U+0161 (decimal 353)
> defining Unicode char U+0162 (decimal 354)
> defining Unicode char U+0163 (decimal 355)
> defining Unicode char U+0164 (decimal 356)
> defining Unicode char U+0165 (decimal 357)
> defining Unicode char U+016E (decimal 366)
> defining Unicode char U+016F (decimal 367)
> defining Unicode char U+0170 (decimal 368)
> defining Unicode char U+0171 (decimal 369)
> defining Unicode char U+0178 (decimal 376)
> defining Unicode char U+0179 (decimal 377)
> defining Unicode char U+017A (decimal 378)
> defining Unicode char U+017B (decimal 379)
> defining Unicode char U+017C (decimal 380)
> defining Unicode char U+017D (decimal 381)
> defining Unicode char U+017E (decimal 382)
> defining Unicode char U+200C (decimal 8204)
> defining Unicode char U+2013 (decimal 8211)
> defining Unicode char U+2014 (decimal 8212)
> defining Unicode char U+2018 (decimal 8216)
> defining Unicode char U+2019 (decimal 8217)
> defining Unicode char U+201A (decimal 8218)
> defining Unicode char U+201C (decimal 8220)
> defining Unicode char U+201D (decimal 8221)
> defining Unicode char U+201E (decimal 8222)
> defining Unicode char U+2030 (decimal 8240)
> defining Unicode char U+2031 (decimal 8241)
> defining Unicode char U+2039 (decimal 8249)
> defining Unicode char U+203A (decimal 8250)
> defining Unicode char U+2423 (decimal 9251)
> )
> Now handling font encoding OT1 ...
> ... processing UTF-8 mapping file for font encodingOT1
>
> (/usr/local/texlive/2008/texmf-dist/tex/latex/base/ot1enc.dfu
> File: ot1enc.dfu 2006/03/30 v1.1i UTF-8 support for inputenc
> defining Unicode char U+00A1 (decimal 161)
> defining Unicode char U+00A3 (decimal 163)
> defining Unicode char U+00B8 (decimal 184)
> defining Unicode char U+00BF (decimal 191)
> defining Unicode char U+00C5 (decimal 197)
> defining Unicode char U+00C6 (decimal 198)
> defining Unicode char U+00D8 (decimal 216)
> defining Unicode char U+00DF (decimal 223)
> defining Unicode char U+00E6 (decimal 230)
> defining Unicode char U+00EC (decimal 236)
> defining Unicode char U+00ED (decimal 237)
> defining Unicode char U+00EE (decimal 238)
> defining Unicode char U+00EF (decimal 239)
> defining Unicode char U+00F8 (decimal 248)
> defining Unicode char U+0131 (decimal 305)
> defining Unicode char U+0141 (decimal 321)
> defining Unicode char U+0142 (decimal 322)
> defining Unicode char U+0152 (decimal 338)
> defining Unicode char U+0153 (decimal 339)
> defining Unicode char U+2013 (decimal 8211)
> defining Unicode char U+2014 (decimal 8212)
> defining Unicode char U+2018 (decimal 8216)
> defining Unicode char U+2019 (decimal 8217)
> defining Unicode char U+201C (decimal 8220)
> defining Unicode char U+201D (decimal 8221)
> )
> Now handling font encoding OMS ...
> ... processing UTF-8 mapping file for font encodingOMS
>
> (/usr/local/texlive/2008/texmf-dist/tex/latex/base/omsenc.dfu
> File: omsenc.dfu 2006/03/30 v1.1i UTF-8 support for inputenc
> defining Unicode char U+00A7 (decimal 167)
> defining Unicode char U+00B6 (decimal 182)
> defining Unicode char U+00B7 (decimal 183)
> defining Unicode char U+2020 (decimal 8224)
> defining Unicode char U+2021 (decimal 8225)
> defining Unicode char U+2022 (decimal 8226)
> )
> Now handling font encoding OMX ...
> ... no UTF-8 mapping file for font encoding OMX
> Now handling font encoding U ...
> ... no UTF-8 mapping file for font encoding U
> defining Unicode char U+00A9 (decimal 169)
> defining Unicode char U+00AA (decimal 170)
> defining Unicode char U+00AE (decimal 174)
> defining Unicode char U+00BA (decimal 186)
> defining Unicode char U+02C6 (decimal 710)
> defining Unicode char U+02DC (decimal 732)
> defining Unicode char U+200C (decimal 8204)
> defining Unicode char U+2026 (decimal 8230)
> defining Unicode char U+2122 (decimal 8482)
> defining Unicode char U+2423 (decimal 9251)
> ))
> (/usr/local/texlive/2008/texmf-dist/tex/latex/geometry/geometry.sty
> Package: geometry 2008/12/21 v4.2 Page Geometry
>
> (/usr/local/texlive/2008/texmf-dist/tex/latex/graphics/keyval.sty
> Package: keyval 1999/03/16 v1.13 key=value parser (DPC)
> \KV at toks@=\toks22
> )
> (/usr/local/texlive/2008/texmf-dist/tex/generic/oberdiek/ifpdf.sty
> Package: ifpdf 2007/12/12 v1.6 Provides the ifpdf switch (HO)
> Package ifpdf Info: pdfTeX in pdf mode detected.
> )
> (/usr/local/texlive/2008/texmf-dist/tex/generic/oberdiek/ifvtex.sty
> Package: ifvtex 2008/11/04 v1.4 Switches for detecting VTeX and its
> modes (HO)
> Package ifvtex Info: VTeX not detected.
> )
> \Gm at cnth=\count100
> \Gm at cntv=\count101
> \c at Gm@tempcnt=\count102
> \Gm at bindingoffset=\dimen112
> \Gm at wd@mp=\dimen113
> \Gm at odd@mp=\dimen114
> \Gm at even@mp=\dimen115
> \Gm at dimlist=\toks23
>
> (/usr/local/texlive/2008/texmf-dist/tex/xelatex/xetexconfig/
> geometry.cfg
> )
> /usr/local/texlive/2008/texmf-dist/tex/latex/geometry/geometry.sty:
> 856:
> Illegal
> unit of measure (pt inserted).
> <to be read again>
> \relax
> l.856 \ProcessOptionsKV[p]{Gm}
> %
> Dimensions can be in units of em, ex, in, pt, pc,
> cm, mm, dd, cc, nd, nc, bp, or sp; but yours is a new one!
> I'll assume that you meant to say pt, for printer's points.
> To recover gracefully from this error, it's best to
> delete the erroneous units; e.g., type `2' to delete
> two letters. (See Chapter 27 of The TeXbook.)
>
> /usr/local/texlive/2008/texmf-dist/tex/latex/geometry/geometry.sty:
> 856:
> Illegal
> unit of measure (pt inserted).
> <to be read again>
> \relax
> l.856 \ProcessOptionsKV[p]{Gm}
> %
> Dimensions can be in units of em, ex, in, pt, pc,
> cm, mm, dd, cc, nd, nc, bp, or sp; but yours is a new one!
> I'll assume that you meant to say pt, for printer's points.
> To recover gracefully from this error, it's best to
> delete the erroneous units; e.g., type `2' to delete
> two letters. (See Chapter 27 of The TeXbook.)
>
> /usr/local/texlive/2008/texmf-dist/tex/latex/geometry/geometry.sty:
> 856:
> Illegal
> unit of measure (pt inserted).
> <to be read again>
> \relax
> l.856 \ProcessOptionsKV[p]{Gm}
> %
> Dimensions can be in units of em, ex, in, pt, pc,
> cm, mm, dd, cc, nd, nc, bp, or sp; but yours is a new one!
> I'll assume that you meant to say pt, for printer's points.
> To recover gracefully from this error, it's best to
> delete the erroneous units; e.g., type `2' to delete
> two letters. (See Chapter 27 of The TeXbook.)
>
> /usr/local/texlive/2008/texmf-dist/tex/latex/geometry/geometry.sty:
> 856:
> Illegal
> unit of measure (pt inserted).
> <to be read again>
> \relax
> l.856 \ProcessOptionsKV[p]{Gm}
> %
> Dimensions can be in units of em, ex, in, pt, pc,
> cm, mm, dd, cc, nd, nc, bp, or sp; but yours is a new one!
> I'll assume that you meant to say pt, for printer's points.
> To recover gracefully from this error, it's best to
> delete the erroneous units; e.g., type `2' to delete
> two letters. (See Chapter 27 of The TeXbook.)
>
> /usr/local/texlive/2008/texmf-dist/tex/latex/geometry/geometry.sty:
> 857:
> Illegal
> unit of measure (pt inserted).
> <to be read again>
> \relax
> l.857 \Gm at process
>
> Dimensions can be in units of em, ex, in, pt, pc,
> cm, mm, dd, cc, nd, nc, bp, or sp; but yours is a new one!
> I'll assume that you meant to say pt, for printer's points.
> To recover gracefully from this error, it's best to
> delete the erroneous units; e.g., type `2' to delete
> two letters. (See Chapter 27 of The TeXbook.)
>
> /usr/local/texlive/2008/texmf-dist/tex/latex/geometry/geometry.sty:
> 857:
> Illegal
> unit of measure (pt inserted).
> <to be read again>
> \relax
> l.857 \Gm at process
>
> Dimensions can be in units of em, ex, in, pt, pc,
> cm, mm, dd, cc, nd, nc, bp, or sp; but yours is a new one!
> I'll assume that you meant to say pt, for printer's points.
> To recover gracefully from this error, it's best to
> delete the erroneous units; e.g., type `2' to delete
> two letters. (See Chapter 27 of The TeXbook.)
>
> ) (/usr/local/texlive/2008/texmf-dist/tex/latex/graphics/graphicx.sty
> Package: graphicx 1999/02/16 v1.0f Enhanced LaTeX Graphics (DPC,SPQR)
>
> (/usr/local/texlive/2008/texmf-dist/tex/latex/graphics/graphics.sty
> Package: graphics 2006/02/20 v1.0o Standard LaTeX Graphics (DPC,SPQR)
>
> (/usr/local/texlive/2008/texmf-dist/tex/latex/graphics/trig.sty
> Package: trig 1999/03/16 v1.09 sin cos tan (DPC)
> )
> (/usr/local/texlive/2008/texmf/tex/latex/config/graphics.cfg
> File: graphics.cfg 2007/01/18 v1.5 graphics configuration of
> teTeX/TeXLive
> )
> Package graphics Info: Driver file: pdftex.def on input line 90.
> )
> \Gin at req@height=\dimen116
> \Gin at req@width=\dimen117
> )
> \latexitbox=\box28
> \latexitdepth=\skip46
> LaTeX Font Info: Try loading font information for U+msa on input
> line
> 16.
>
> (/usr/local/texlive/2008/texmf-dist/tex/latex/amsfonts/umsa.fd
> File: umsa.fd 2002/01/19 v2.2g AMS font definitions
> )
> LaTeX Font Info: Try loading font information for U+msb on input
> line
> 16.
>
> (/usr/local/texlive/2008/texmf-dist/tex/latex/amsfonts/umsb.fd
> File: umsb.fd 2002/01/19 v2.2g AMS font definitions
> )
> \foo=\write3
> \openout3 = `latexit-1-baseline.sizes'.
>
>
> No file latexit-1-baseline.aux.
> \openout1 = `latexit-1-baseline.aux'.
>
> LaTeX Font Info: Checking defaults for OML/cmm/m/it on input line
> 23.
> LaTeX Font Info: ... okay on input line 23.
> LaTeX Font Info: Checking defaults for T1/cmr/m/n on input line 23.
> LaTeX Font Info: ... okay on input line 23.
> LaTeX Font Info: Checking defaults for OT1/cmr/m/n on input line
> 23.
> LaTeX Font Info: ... okay on input line 23.
> LaTeX Font Info: Checking defaults for OMS/cmsy/m/n on input line
> 23.
> LaTeX Font Info: ... okay on input line 23.
> LaTeX Font Info: Checking defaults for OMX/cmex/m/n on input line
> 23.
> LaTeX Font Info: ... okay on input line 23.
> LaTeX Font Info: Checking defaults for U/cmr/m/n on input line 23.
> LaTeX Font Info: ... okay on input line 23.
> (/usr/local/texlive/2008/texmf-dist/tex/context/base/supp-pdf.tex
> [Loading MPS to PDF converter (version 2006.09.02).]
> \scratchcounter=\count103
> \scratchdimen=\dimen118
> \scratchbox=\box29
> \nofMPsegments=\count104
> \nofMParguments=\count105
> \everyMPshowfont=\toks24
> \MPscratchCnt=\count106
> \MPscratchDim=\dimen119
> \MPnumerator=\count107
> \everyMPtoPDFconversion=\toks25
> )
> *geometry auto-detecting driver*
> *geometry detected driver: pdftex*
> -------------------- Geometry parameters
> paper: user defined
> landscape: --
> twocolumn: --
> twoside: --
> asymmetric: --
> h-parts: 0.0pt, 557.0pt, 0.0pt
> v-parts: 0.0pt, 2384.0pt, 0.0pt
> hmarginratio: --
> vmarginratio: --
> lines: --
> heightrounded: --
> bindingoffset: 0.0pt
> truedimen: --
> includehead: --
> includefoot: --
> includemp: --
> driver: pdftex
> -------------------- Page layout dimensions and switches
> \paperwidth 557.0pt
> \paperheight 2384.0pt
> \textwidth 557.0pt
> \textheight 2384.0pt
> \oddsidemargin -72.26999pt
> \evensidemargin -72.26999pt
> \topmargin -109.26999pt
> \headheight 12.0pt
> \headsep 25.0pt
> \footskip 30.0pt
> \marginparwidth 65.0pt
> \marginparsep 11.0pt
> \columnsep 10.0pt
> \skip\footins 9.0pt plus 4.0pt minus 2.0pt
> \hoffset 0.0pt
> \voffset 0.0pt
> \mag 1000
>
> (1in=72.27pt, 1cm=28.45pt)
> -----------------------
>
> Package pdftex.def Warning: Option `bb' does not make sense,
> (pdftex.def) using `viewport' instead on input line 23.
>
> <latexit-1.pdf, id=1, 614.295pt x 794.97pt>
> File: latexit-1.pdf Graphic file (type pdf)
> <use latexit-1.pdf> [1
>
>
> <./latexit-1.pdf{/usr/local/texlive/2008/texmf-var/fonts/map/pdftex/
> updmap/pdf
> tex.map}>]
> (./latexit-1-baseline.aux) )
> Here is how much of TeX's memory you used:
> 2393 strings out of 493877
> 29940 string characters out of 1150610
> 82328 words of memory out of 3000000
> 5657 multiletter control sequences out of 10000+50000
> 5339 words of font info for 22 fonts, out of 3000000 for 5000
> 714 hyphenation exceptions out of 8191
> 27i,6n,32p,378b,122s stack positions out of
> 5000i,500n,10000p,200000b,50000s
> </usr/local/texlive/2008/texmf-dist/fonts/type1/blu
> esky/cm/cmmi10.pfb>
> Output written on latexit-1-baseline.pdf (1 page, 4312 bytes).
> PDF statistics:
> 16 PDF objects out of 1000 (max. 8388607)
> 0 named destinations out of 1000 (max. 131072)
> 12 words of extra memory for PDF output out of 10000 (max. 10000000)
>
> ----------- Please Consult the Following Before Posting -----------
> TeX FAQ: http://www.tex.ac.uk/faq
> List Reminders and Etiquette: http://email.esm.psu.edu/mac-tex/
> List Archive: http://tug.org/pipermail/macostex-archives/
> TeX on Mac OS X Website: http://mactex-wiki.tug.org/
> List Info: http://email.esm.psu.edu/mailman/listinfo/macosx-tex
>
More information about the macostex-archives
mailing list