texlive[49121] Master/texmf-dist: register (10nov18)
commits+karl at tug.org
commits+karl at tug.org
Sat Nov 10 23:18:17 CET 2018
Revision: 49121
http://tug.org/svn/texlive?view=revision&revision=49121
Author: karl
Date: 2018-11-10 23:18:17 +0100 (Sat, 10 Nov 2018)
Log Message:
-----------
register (10nov18)
Modified Paths:
--------------
trunk/Master/texmf-dist/doc/latex/register/register.pdf
trunk/Master/texmf-dist/source/latex/register/register.dtx
trunk/Master/texmf-dist/tex/latex/register/register.sty
Modified: trunk/Master/texmf-dist/doc/latex/register/register.pdf
===================================================================
(Binary files differ)
Modified: trunk/Master/texmf-dist/source/latex/register/register.dtx
===================================================================
--- trunk/Master/texmf-dist/source/latex/register/register.dtx 2018-11-10 22:17:02 UTC (rev 49120)
+++ trunk/Master/texmf-dist/source/latex/register/register.dtx 2018-11-10 22:18:17 UTC (rev 49121)
@@ -20,10 +20,10 @@
\ProvidesFile{register.dtx}
%</dtx>
% \fi
-% \CheckSum{739}
+% \CheckSum{776}
%
-% \def\fileversion{v1.7}
-% \def\filedate{2018/08/18}
+% \def\fileversion{v1.8}
+% \def\filedate{2018/11/10}
% \title{Register diagrams with field descriptions}
% \author{Matthew Lovell\\
% \texttt{lovells at gmail.com}
@@ -208,7 +208,11 @@
%
% A final example is shown in Figure~\ref{fig:regbus_cycle}. This
% example shows that the register drawing macros don't have to be used
-% solely within a |register| float.
+% solely within a |register| float or environment. With Version~1.8,
+% an unnumbered register environment is also available, using
+% |register*|. Diagrams produced using the starred environment
+% typeset just the register name, omitting the ``Register'' and number
+% prefix.
%
% \begin{figure}[H]
% \begin{center}^^A
@@ -293,7 +297,16 @@
% improve readability.
% \end{macro}
% \hspace*{\MacroIndent}|\regfield{|\meta{name}|}{|\meta{length}|}{|^^A
-% \meta{start bit}|}{|\meta{reset value}|}|
+% \meta{start bit}|}{|\meta{reset value}|}|\\[2pt]
+%
+% Note that the comments that are shown in the code are for the
+% benefit of the helper scripts that accompany the |register|
+% package. Those scripts are quite old and have \emph{not} been
+% updated to be tolerant of the optional color argument that is now
+% supported. However, the general notion of using embedded comments
+% to augment register or field information is still applicable, if
+% one is using this package with the intent of generating HDL code
+% from documentation.
%
% \begin{macro}{\regBitWidth}
% \begin{macro}{\regnewline}
@@ -314,7 +327,7 @@
% \hspace*{\MacroIndent}|\reglabel{|\meta{reset label}|}|\\[2pt]
%
%
-% As a final example, consider Register~\ref{Configuration}, which has
+% As another example, consider Register~\ref{Configuration} below, which has
% field descriptions as part of the float. This diagram was created
% with the following code:
% \begin{verbatim}
@@ -414,7 +427,7 @@
% the register description body should be. The default value is 90\%
% of |\textwidth|. For |reglist|, the optional argument is the
% longest field name, which allows the list to be spaced appropriately
-% (like examples given in \textit{The \LaTeX{} Companion}).
+% (like examples given in \emph{The \LaTeX{} Companion}).
%
% \begin{macro}{\regfieldb}
% Finally, if a register with no reset values is desired, one can use
@@ -427,12 +440,12 @@
% \subsection{TR Flags}
%
% \begin{macro}{\TR}
-% The last example also shows the TR flags. These marginal notes can
+% The previous example also shows the TR flags. These marginal notes can
% be used to denote features that are specific to a particular release
% of a chip. These macros were created since \LaTeX{}'s |\marginpar|
% is itself a float; as such it cannot be nested inside other floats.
% The |\TR| macros thus implement something very similar to the
-% solution for Problem~14.28 in \textit{The \TeX{}book}.
+% solution for Problem~14.28 in \emph{The \TeX{}book}.
% TR flags are turned on via the |TRflags| package option. If the
% option is not specified, then the |\TR| macro still exists but is
@@ -487,7 +500,7 @@
%
% \section{Helper Scripts} \label{sec:scripts}
%
-% A Perl module and a perl script are included as part of the
+% A (now old) Perl module and a Perl script are included as part of the
% |register| package. The module augments the package by
% providing the ability to parse the register macro information into
% Perl. This information consists of the parameters used within
@@ -502,6 +515,10 @@
% information for each register. The later data can be used in
% simulation to ensure that registers behave as documented.
%
+% Users are cautioned that the Perl script, since it is no longer in
+% active use by the author, has not been modified to support the
+% optional color argument for the |regfield| macro.
+%
% \section{Version History} \label{sec:history}
%
% \begin{itemize}
@@ -524,6 +541,7 @@
% \item [\textbf{v1.6}] (2011/01/11) Mainmatter correction suggested by Kjetil Oftedal
% \item [\textbf{v1.6.1}] (2018/05/19) Published with updated email address; no functional changes
% \item [\textbf{v1.7}] (2018/08/18) Added color option to package, suggested by Marco Stolba
+% \item [\textbf{v1.8}] (2018/11/10) Added unnumbered |register*| environment, suggested and written by Stephan Bauroth
% \end{itemize}
%
%
@@ -543,7 +561,7 @@
%
% Announce the name and unconditionally load most of the required packages:
% \begin{macrocode}
-\ProvidesPackage{register} [2018/08/18 v1.7 Register macros with
+\ProvidesPackage{register} [2018/11/10 v1.8 Register macros with
hyperref/LyX support]
\RequirePackage{ifthen}[1997/11/02]
@@ -785,7 +803,33 @@
\end{Regfloat}}
% \end{macrocode}
%
+% \begin{macro}{\register*}
+% This register* environment provides for an unnumbered or ``captionless'' register;
+% registers in such an environment are not added to the list of registers.
+% \end{macro}
+% \begin{macrocode}
+\newenvironment{register*}[3]
+{\begin{Regfloat}[#1]%
+ \setlength{\leftskip}{0pt}%
+ \setlength{\oldregdescsep}{\regdescsep}%
+ \setlength{\regdescsep}{0.5\baselineskip}%
+ \setlength{\partopsep}{0pt}%
+ \setlength{\topsep}{0pt}%
+ \setboolean{RegisterContext}{true}%
+ \ifthenelse{\equal{#3}{}}%
+ {\centering\textsc{#2}\\}% else
+ {\centering\textsc{#2} ({#3})\\}%
+ \centering}
+{% restore lengths
+ \leftskip\z@%
+ \rightskip\z@%
+ \parfillskip=\z@ plus 1fil%
+ \setlength{\regdescsep}{\oldregdescsep}%
+ \setboolean{RegisterContext}{false}%
+ \end{Regfloat}}
+% \end{macrocode}
%
+%
% \begin{macro}{\regUnderScore}
% \begin{macro}{\regFiller}
% \begin{macro}{\regSpread}
Modified: trunk/Master/texmf-dist/tex/latex/register/register.sty
===================================================================
--- trunk/Master/texmf-dist/tex/latex/register/register.sty 2018-11-10 22:17:02 UTC (rev 49120)
+++ trunk/Master/texmf-dist/tex/latex/register/register.sty 2018-11-10 22:18:17 UTC (rev 49121)
@@ -22,7 +22,7 @@
-\ProvidesPackage{register} [2018/08/18 v1.7 Register macros with
+\ProvidesPackage{register} [2018/11/10 v1.8 Register macros with
hyperref/LyX support]
\RequirePackage{ifthen}[1997/11/02]
@@ -144,6 +144,25 @@
\setlength{\regdescsep}{\oldregdescsep}%
\setboolean{RegisterContext}{false}%
\end{Regfloat}}
+\newenvironment{register*}[3]
+{\begin{Regfloat}[#1]%
+ \setlength{\leftskip}{0pt}%
+ \setlength{\oldregdescsep}{\regdescsep}%
+ \setlength{\regdescsep}{0.5\baselineskip}%
+ \setlength{\partopsep}{0pt}%
+ \setlength{\topsep}{0pt}%
+ \setboolean{RegisterContext}{true}%
+ \ifthenelse{\equal{#3}{}}%
+ {\centering\textsc{#2}\\}% else
+ {\centering\textsc{#2} ({#3})\\}%
+ \centering}
+{% restore lengths
+ \leftskip\z@%
+ \rightskip\z@%
+ \parfillskip=\z@ plus 1fil%
+ \setlength{\regdescsep}{\oldregdescsep}%
+ \setboolean{RegisterContext}{false}%
+ \end{Regfloat}}
\def\regUnderScore{_}%
\def\regFiller#1{\def\regInner{#1}%
\ifx\regInner\regUnderScore%
More information about the tex-live-commits
mailing list