texlive[47004] Build/source/libs: zziplib-0.13.69
commits+kakuto at tug.org
commits+kakuto at tug.org
Sun Mar 18 01:25:19 CET 2018
Revision: 47004
http://tug.org/svn/texlive?view=revision&revision=47004
Author: kakuto
Date: 2018-03-18 01:25:18 +0100 (Sun, 18 Mar 2018)
Log Message:
-----------
zziplib-0.13.69
Modified Paths:
--------------
trunk/Build/source/libs/README
trunk/Build/source/libs/zziplib/ChangeLog
trunk/Build/source/libs/zziplib/README
trunk/Build/source/libs/zziplib/TLpatches/ChangeLog
trunk/Build/source/libs/zziplib/TLpatches/TL-Changes
trunk/Build/source/libs/zziplib/config.h.in
trunk/Build/source/libs/zziplib/configure
trunk/Build/source/libs/zziplib/configure.ac
trunk/Build/source/libs/zziplib/version.ac
trunk/Build/source/libs/zziplib/zziplib-src/ChangeLog
trunk/Build/source/libs/zziplib/zziplib-src/Makefile.in
trunk/Build/source/libs/zziplib/zziplib-src/README
trunk/Build/source/libs/zziplib/zziplib-src/SDL/Makefile.in
trunk/Build/source/libs/zziplib/zziplib-src/bins/Makefile.am
trunk/Build/source/libs/zziplib/zziplib-src/bins/Makefile.in
trunk/Build/source/libs/zziplib/zziplib-src/bins/unzip-mem.c
trunk/Build/source/libs/zziplib/zziplib-src/bins/unzzipcat-big.c
trunk/Build/source/libs/zziplib/zziplib-src/bins/unzzipcat-mem.c
trunk/Build/source/libs/zziplib/zziplib-src/bins/unzzipcat-mix.c
trunk/Build/source/libs/zziplib/zziplib-src/bins/unzzipcat-zip.c
trunk/Build/source/libs/zziplib/zziplib-src/bins/unzzipdir-big.c
trunk/Build/source/libs/zziplib/zziplib-src/bins/unzzipdir-mem.c
trunk/Build/source/libs/zziplib/zziplib-src/bins/unzzipdir-mix.c
trunk/Build/source/libs/zziplib/zziplib-src/bins/unzzipdir-zip.c
trunk/Build/source/libs/zziplib/zziplib-src/config.h.in
trunk/Build/source/libs/zziplib/zziplib-src/configure
trunk/Build/source/libs/zziplib/zziplib-src/configure.ac
trunk/Build/source/libs/zziplib/zziplib-src/docs/Makefile.am
trunk/Build/source/libs/zziplib/zziplib-src/docs/Makefile.in
trunk/Build/source/libs/zziplib/zziplib-src/m4/ax_not_enable_frame_pointer.m4
trunk/Build/source/libs/zziplib/zziplib-src/m4/libtool.m4
trunk/Build/source/libs/zziplib/zziplib-src/m4/ltoptions.m4
trunk/Build/source/libs/zziplib/zziplib-src/m4/ltsugar.m4
trunk/Build/source/libs/zziplib/zziplib-src/m4/ltversion.m4
trunk/Build/source/libs/zziplib/zziplib-src/m4/lt~obsolete.m4
trunk/Build/source/libs/zziplib/zziplib-src/test/Makefile.am
trunk/Build/source/libs/zziplib/zziplib-src/test/Makefile.in
trunk/Build/source/libs/zziplib/zziplib-src/test/README
trunk/Build/source/libs/zziplib/zziplib-src/test/test.zip
trunk/Build/source/libs/zziplib/zziplib-src/test/zziptests.py
trunk/Build/source/libs/zziplib/zziplib-src/zzip/Makefile.in
trunk/Build/source/libs/zziplib/zziplib-src/zzip/__fnmatch.h
trunk/Build/source/libs/zziplib/zziplib-src/zzip/__mmap.h
trunk/Build/source/libs/zziplib/zziplib-src/zzip/__string.h
trunk/Build/source/libs/zziplib/zziplib-src/zzip/dir.c
trunk/Build/source/libs/zziplib/zziplib-src/zzip/fetch.c
trunk/Build/source/libs/zziplib/zziplib-src/zzip/file.c
trunk/Build/source/libs/zziplib/zziplib-src/zzip/info.c
trunk/Build/source/libs/zziplib/zziplib-src/zzip/lib.h
trunk/Build/source/libs/zziplib/zziplib-src/zzip/memdisk.c
trunk/Build/source/libs/zziplib/zziplib-src/zzip/mmapped.c
trunk/Build/source/libs/zziplib/zziplib-src/zzip/mmapped.h
trunk/Build/source/libs/zziplib/zziplib-src/zzip/plugin.c
trunk/Build/source/libs/zziplib/zziplib-src/zzip/plugin.h
trunk/Build/source/libs/zziplib/zziplib-src/zzip/stat.c
trunk/Build/source/libs/zziplib/zziplib-src/zzip/stdint.h
trunk/Build/source/libs/zziplib/zziplib-src/zzip/zip.c
trunk/Build/source/libs/zziplib/zziplib-src/zziplib.spec
trunk/Build/source/libs/zziplib/zziplib-src/zzipwrap/Makefile.in
trunk/Build/source/libs/zziplib/zziplib-src/zzipwrap/zzipwrap.pc
Added Paths:
-----------
trunk/Build/source/libs/zziplib/TLpatches/patch-05-no-const
trunk/Build/source/libs/zziplib/zziplib-src/SDL/zzip-sdl-config.pc
trunk/Build/source/libs/zziplib/zziplib-src/SDL/zzip-sdl-rwops.pc
trunk/Build/source/libs/zziplib/zziplib-src/bins/unzzipshow.c
trunk/Build/source/libs/zziplib/zziplib-src/docs/cpp2markdown-1.py
trunk/Build/source/libs/zziplib/zziplib-src/docs/cpp2markdown.py
trunk/Build/source/libs/zziplib/zziplib-src/docs/dbk2man.py
trunk/Build/source/libs/zziplib/zziplib-src/docs/dir-zzip-192.png
trunk/Build/source/libs/zziplib/zziplib-src/docs/dir-zzip-64.png
trunk/Build/source/libs/zziplib/zziplib-src/docs/site.htm
trunk/Build/source/libs/zziplib/zziplib-src/m4/ax_check_enable_debug.m4
trunk/Build/source/libs/zziplib/zziplib-src/m4/ax_enable_builddir_uname.m4
trunk/Build/source/libs/zziplib/zziplib-src/msvc7/README.TXT
trunk/Build/source/libs/zziplib/zziplib-src/msvc7/zip.exe
trunk/Build/source/libs/zziplib/zziplib-src/ports/
trunk/Build/source/libs/zziplib/zziplib-src/ports/symbian-S60/
trunk/Build/source/libs/zziplib/zziplib-src/ports/symbian-S60/zziplib-symbian.zip
Removed Paths:
-------------
trunk/Build/source/libs/zziplib/TLpatches/patch-01-binary
trunk/Build/source/libs/zziplib/TLpatches/patch-02-bugfix
trunk/Build/source/libs/zziplib/TLpatches/patch-03-w64-ptr
trunk/Build/source/libs/zziplib/TLpatches/patch-04-strnlen
trunk/Build/source/libs/zziplib/zziplib-src/SDL/SDL_rwops_zzip.pc
trunk/Build/source/libs/zziplib/zziplib-src/docs/zzipfseeko.html
trunk/Build/source/libs/zziplib/zziplib-src/docs/zziplib-manpages.tar
trunk/Build/source/libs/zziplib/zziplib-src/docs/zzipmmapped.html
trunk/Build/source/libs/zziplib/zziplib-src/test/test1.zip
trunk/Build/source/libs/zziplib/zziplib-src/zzip/zzip-zlib-config.pc
trunk/Build/source/libs/zziplib/zziplib-src/zzip/zzipfseeko.pc
trunk/Build/source/libs/zziplib/zziplib-src/zzip/zziplib.pc
trunk/Build/source/libs/zziplib/zziplib-src/zzip/zzipmmapped.pc
Modified: trunk/Build/source/libs/README
===================================================================
--- trunk/Build/source/libs/README 2018-03-17 22:23:43 UTC (rev 47003)
+++ trunk/Build/source/libs/README 2018-03-18 00:25:18 UTC (rev 47004)
@@ -66,5 +66,5 @@
zlib 1.2.11 - checked 15jan17
http://www.zlib.net/ - used by many
-zziplib 0.13.68 - checked 06feb18
- http://zziplib.sourceforge.net/ - used by luatex
+zziplib 0.13.69 - checked 18mar18
+ https://github.com/gdraheim/zziplib/archive/v0.13.69.tar.gz
Modified: trunk/Build/source/libs/zziplib/ChangeLog
===================================================================
--- trunk/Build/source/libs/zziplib/ChangeLog 2018-03-17 22:23:43 UTC (rev 47003)
+++ trunk/Build/source/libs/zziplib/ChangeLog 2018-03-18 00:25:18 UTC (rev 47004)
@@ -1,3 +1,8 @@
+2018-03-18 Akira Kakuto <kakuto at fuk.kindai.ac.jp>
+
+ * Import zziplib 0.13.69.
+ configure.ac, version.ac: Adapted.
+
2018-02-06 Akira Kakuto <kakuto at fuk.kindai.ac.jp>
* Import zziplib 0.13.68.
Modified: trunk/Build/source/libs/zziplib/README
===================================================================
--- trunk/Build/source/libs/zziplib/README 2018-03-17 22:23:43 UTC (rev 47003)
+++ trunk/Build/source/libs/zziplib/README 2018-03-18 00:25:18 UTC (rev 47004)
@@ -1,4 +1,4 @@
- Building zziplib-0.13.68 as part of the TL tree
+ Building zziplib-0.13.69 as part of the TL tree
===============================================
This directory libs/zziplib/ uses a proxy Makefile.am to build the zziplib
@@ -14,4 +14,4 @@
=============================
2010-01-30 Peter Breitenlohner <peb at mppmu.mpg.de>
-2018-02-06 Akira Kakuto <kakuto at fuk.kindai.ac.jp>
+2018-03-18 Akira Kakuto <kakuto at fuk.kindai.ac.jp>
Modified: trunk/Build/source/libs/zziplib/TLpatches/ChangeLog
===================================================================
--- trunk/Build/source/libs/zziplib/TLpatches/ChangeLog 2018-03-17 22:23:43 UTC (rev 47003)
+++ trunk/Build/source/libs/zziplib/TLpatches/ChangeLog 2018-03-18 00:25:18 UTC (rev 47004)
@@ -1,3 +1,11 @@
+2018-03-18 Akira Kakuto <kakuto at fuk.kindai.ac.jp>
+
+ * Import zziplib-0.13.69.
+ * patch-01-binary, patch-02-bugfix, patch-03-w64-ptr,
+ patch-04-strnlen: Removed.
+ * patch-05-no-const: Added because a crash occurs on
+ Windows for -D_USE_MMAP=1.
+
2018-03-01 Akira Kakuto <kakuto at fuk.kindai.ac.jp>
* patch-04-strnlen: Add for platforms without strnlen.
Modified: trunk/Build/source/libs/zziplib/TLpatches/TL-Changes
===================================================================
--- trunk/Build/source/libs/zziplib/TLpatches/TL-Changes 2018-03-17 22:23:43 UTC (rev 47003)
+++ trunk/Build/source/libs/zziplib/TLpatches/TL-Changes 2018-03-18 00:25:18 UTC (rev 47004)
@@ -1,5 +1,5 @@
-Changes applied to the zziplib-0.13.68/ tree as obtained from:
- http://zziplib.sourceforge.net/
+Changes applied to the zziplib-0.13.69 tree as obtained from:
+https://github.com/gdraheim/zziplib/archive/v0.13.69.tar.gz
Copied:
m4/ax_prefix_config_h.m4 -> ../m4/ (without AC_BEFORE)
@@ -6,10 +6,13 @@
m4/ac_sys_largefile_sensitive.m4 -> ../m4/
Removed:
+ .cdtproject
+ .gitignore
+ .pydevproject
aclocal.m4
+ msvc/
uses/
zzip/_msvc.h
- zzip/_config.h
Converted Dos/Win line ends to native:
docs/README.MSVC6
Deleted: trunk/Build/source/libs/zziplib/TLpatches/patch-01-binary
===================================================================
--- trunk/Build/source/libs/zziplib/TLpatches/patch-01-binary 2018-03-17 22:23:43 UTC (rev 47003)
+++ trunk/Build/source/libs/zziplib/TLpatches/patch-01-binary 2018-03-18 00:25:18 UTC (rev 47004)
@@ -1,126 +0,0 @@
-diff -ur zziplib-0.13.68.orig/bins/unzip-mem.c zziplib-0.13.68/bins/unzip-mem.c
---- zziplib-0.13.68.orig/bins/unzip-mem.c Tue Feb 06 05:00:56 2018
-+++ zziplib-0.13.68/bins/unzip-mem.c Tue Feb 06 08:07:16 2018
-@@ -96,7 +96,7 @@
- static void zzip_mem_entry_make(ZZIP_MEM_DISK* disk,
- ZZIP_MEM_ENTRY* entry)
- {
-- FILE* file = fopen (entry->zz_name, "w");
-+ FILE* file = fopen (entry->zz_name, "wb");
- if (file) { zzip_mem_entry_pipe (disk, entry, file); fclose (file); }
- perror (entry->zz_name);
- if (status < EXIT_WARNINGS) status = EXIT_WARNINGS;
-diff -ur zziplib-0.13.68.orig/bins/unzzipcat-big.c zziplib-0.13.68/bins/unzzipcat-big.c
---- zziplib-0.13.68.orig/bins/unzzipcat-big.c Tue Feb 06 05:00:56 2018
-+++ zziplib-0.13.68/bins/unzzipcat-big.c Tue Feb 06 09:58:56 2018
-@@ -89,7 +89,7 @@
- int argn;
- FILE* disk;
-
-- disk = fopen (argv[1], "r");
-+ disk = fopen (argv[1], "rb");
- if (! disk) {
- perror(argv[1]);
- return exitcode(errno);
-@@ -106,7 +106,7 @@
- done = EXIT_WARNINGS;
- continue;
- }
-- if (extract) out = create_fopen(name, "w", 1);
-+ if (extract) out = create_fopen(name, "wb", 1);
- if (! out) {
- if (errno != EISDIR) done = EXIT_ERRORS;
- continue;
-@@ -139,7 +139,7 @@
- FNM_NOESCAPE|FNM_PATHNAME|FNM_PERIOD))
- {
- FILE* out = stdout;
-- if (extract) out = create_fopen(name, "w", 1);
-+ if (extract) out = create_fopen(name, "wb", 1);
- if (! out) {
- if (errno != EISDIR) done = EXIT_ERRORS;
- continue;
-diff -ur zziplib-0.13.68.orig/bins/unzzipcat-mem.c zziplib-0.13.68/bins/unzzipcat-mem.c
---- zziplib-0.13.68.orig/bins/unzzipcat-mem.c Tue Feb 06 05:00:56 2018
-+++ zziplib-0.13.68/bins/unzzipcat-mem.c Tue Feb 06 09:59:22 2018
-@@ -114,7 +114,7 @@
- {
- char* name = zzip_mem_entry_to_name (entry);
- FILE* out = stdout;
-- if (extract) out = create_fopen(name, "w", 1);
-+ if (extract) out = create_fopen(name, "wb", 1);
- if (! out) {
- if (errno != EISDIR) done = EXIT_ERRORS;
- continue;
-@@ -146,7 +146,7 @@
- FNM_NOESCAPE|FNM_PATHNAME|FNM_PERIOD))
- {
- FILE* out = stdout;
-- if (extract) out = create_fopen(name, "w", 1);
-+ if (extract) out = create_fopen(name, "wb", 1);
- if (! out) {
- if (errno != EISDIR) done = EXIT_ERRORS;
- continue;
-diff -ur zziplib-0.13.68.orig/bins/unzzipcat-mix.c zziplib-0.13.68/bins/unzzipcat-mix.c
---- zziplib-0.13.68.orig/bins/unzzipcat-mix.c Tue Feb 06 05:00:56 2018
-+++ zziplib-0.13.68/bins/unzzipcat-mix.c Tue Feb 06 09:59:45 2018
-@@ -56,7 +56,7 @@
-
- static void unzzip_cat_file(ZZIP_DIR* disk, char* name, FILE* out)
- {
-- ZZIP_FILE* file = zzip_fopen(name, "r");
-+ ZZIP_FILE* file = zzip_fopen(name, "rb");
- if (file)
- {
- char buffer[1024]; int len;
-@@ -124,7 +124,7 @@
- {
- char* name = entry->d_name;
- FILE* out = stdout;
-- if (extract) out = create_fopen(name, "w", 1);
-+ if (extract) out = create_fopen(name, "wb", 1);
- if (! out) {
- if (errno != EISDIR) done = EXIT_ERRORS;
- continue;
-@@ -155,7 +155,7 @@
- memcpy(mix_name, zip_name, zip_name_len);
- mix_name[zip_name_len] = '/';
- strcpy(mix_name + zip_name_len + 1, name);
-- if (extract) out = create_fopen(name, "w", 1);
-+ if (extract) out = create_fopen(name, "wb", 1);
- if (! out) {
- if (errno != EISDIR) done = EXIT_ERRORS;
- continue;
-diff -ur zziplib-0.13.68.orig/bins/unzzipcat-zip.c zziplib-0.13.68/bins/unzzipcat-zip.c
---- zziplib-0.13.68.orig/bins/unzzipcat-zip.c Tue Feb 06 05:00:56 2018
-+++ zziplib-0.13.68/bins/unzzipcat-zip.c Tue Feb 06 10:00:14 2018
-@@ -124,7 +124,7 @@
- {
- char* name = entry.d_name;
- FILE* out = stdout;
-- if (extract) out = create_fopen(name, "w", 1);
-+ if (extract) out = create_fopen(name, "wb", 1);
- if (! out) {
- DBG3("fopen' %s : %s", name, strerror(errno));
- if (errno != EISDIR) done = EXIT_ERRORS;
-@@ -146,7 +146,7 @@
- FNM_NOESCAPE|FNM_PATHNAME|FNM_PERIOD))
- {
- FILE* out = stdout;
-- if (extract) out = create_fopen(name, "w", 1);
-+ if (extract) out = create_fopen(name, "wb", 1);
- if (! out) {
- DBG3("fopen. %s : %s", name, strerror(errno));
- if (errno != EISDIR) done = EXIT_ERRORS;
-diff -ur zziplib-0.13.68.orig/bins/unzzipdir-big.c zziplib-0.13.68/bins/unzzipdir-big.c
---- zziplib-0.13.68.orig/bins/unzzipdir-big.c Tue Feb 06 05:00:56 2018
-+++ zziplib-0.13.68/bins/unzzipdir-big.c Tue Feb 06 08:20:44 2018
-@@ -35,7 +35,7 @@
- int argn;
- FILE* disk;
-
-- disk = fopen (argv[1], "r");
-+ disk = fopen (argv[1], "rb");
- if (! disk) {
- perror(argv[1]);
- return exitcode(errno);
Deleted: trunk/Build/source/libs/zziplib/TLpatches/patch-02-bugfix
===================================================================
--- trunk/Build/source/libs/zziplib/TLpatches/patch-02-bugfix 2018-03-17 22:23:43 UTC (rev 47003)
+++ trunk/Build/source/libs/zziplib/TLpatches/patch-02-bugfix 2018-03-18 00:25:18 UTC (rev 47004)
@@ -1,129 +0,0 @@
-diff -ur zziplib-0.13.68.orig/zzip/__fnmatch.h zziplib-0.13.68/zzip/__fnmatch.h
---- zziplib-0.13.68.orig/zzip/__fnmatch.h Tue Feb 06 05:00:56 2018
-+++ zziplib-0.13.68/zzip/__fnmatch.h Tue Feb 06 10:35:33 2018
-@@ -20,13 +20,7 @@
- #else
- # define _zzip_FNM_CASEFOLD 0
- /* if your system does not have fnmatch, we fall back to strcmp: */
--static int _zzip_fnmatch(char* pattern, char* string, int flags)
--{
--# ifdef DBG2
-- DBG1("<zzip:mmapped:strcmp>");
--# endif
-- return strcmp (pattern, string);
--}
-+#define _zzip_fnmatch(x,y,z) strcmp ((x),(y))
- #endif
-
- #endif
-diff -ur zziplib-0.13.68.orig/zzip/__mmap.h zziplib-0.13.68/zzip/__mmap.h
---- zziplib-0.13.68.orig/zzip/__mmap.h Tue Feb 06 05:00:56 2018
-+++ zziplib-0.13.68/zzip/__mmap.h Tue Feb 06 08:37:50 2018
-@@ -45,43 +45,61 @@
- #define MAP_FAILED 0
- #endif
- /* we (ab)use the "*user" variable to store the FileMapping handle */
-- /* which assumes (sizeof(long) == sizeof(HANDLE)) */
-+ /* and make sure (sizeof(*user) == sizeof(HANDLE)) */
-
- static size_t win32_getpagesize (void)
- {
- SYSTEM_INFO si; GetSystemInfo (&si);
- return si.dwAllocationGranularity;
- }
-+#ifdef _WIN64
-+static void* win32_mmap (__int64* user, int fd, zzip_off_t offs, size_t len)
-+#else
- static void* win32_mmap (long* user, int fd, zzip_off_t offs, size_t len)
-+#endif
- {
- if (! user || *user != 1) /* || offs % getpagesize() */
- return 0;
- {
- HANDLE hFile = (HANDLE)_get_osfhandle(fd);
- if (hFile)
-- *user = (int) CreateFileMapping (hFile, 0, PAGE_READONLY, 0, 0, NULL);
-+#ifdef _WIN64
-+ *user = (__int64) CreateFileMapping (hFile, 0, PAGE_READONLY, 0, 0, NULL);
-+#else
-+ *user = (long) CreateFileMapping (hFile, 0, PAGE_READONLY, 0, 0, NULL);
-+#endif
- if (*user)
- {
- char* p = 0;
- p = MapViewOfFile(*(HANDLE*)user, FILE_MAP_READ, 0, offs, len);
-- if (p) return p + offs;
-+ if (p) return p;
- CloseHandle (*(HANDLE*)user); *user = 1;
- }
- return MAP_FAILED;
- }
- }
-+#ifdef _WIN64
-+static void win32_munmap (__int64* user, char* fd_map, size_t len)
-+#else
- static void win32_munmap (long* user, char* fd_map, size_t len)
-+#endif
- {
- UnmapViewOfFile (fd_map);
- CloseHandle (*(HANDLE*)user); *user = 1;
- }
-
-+#ifdef _WIN64
-+#define _zzip_mmap(user, fd, offs, len) \
-+ win32_mmap ((__int64*) &(user), fd, offs, len)
-+#define _zzip_munmap(user, ptr, len) \
-+ win32_munmap ((__int64*) &(user), ptr, len)
-+#else
- #define _zzip_mmap(user, fd, offs, len) \
- win32_mmap ((long*) &(user), fd, offs, len)
- #define _zzip_munmap(user, ptr, len) \
- win32_munmap ((long*) &(user), ptr, len)
-+#endif
- #define _zzip_getpagesize(user) win32_getpagesize()
--
- #else /* disable */
- #define USE_MMAP 0
- /* USE_MAP is intentional: we expect the compiler to do some "code removal"
-diff -ur zziplib-0.13.68.orig/zzip/mmapped.h zziplib-0.13.68/zzip/mmapped.h
---- zziplib-0.13.68.orig/zzip/mmapped.h Tue Feb 06 05:00:56 2018
-+++ zziplib-0.13.68/zzip/mmapped.h Tue Feb 06 08:39:00 2018
-@@ -37,7 +37,11 @@
- void* reserved; /* - for later extensions (might be renamed) */
- void* user; /* - free for applications (use this!) */
- long flags; /* bit 0: findfile searches case-insensitive */
-+#ifdef _WIN64
-+ __int64 mapped;
-+#else
- long mapped; /* used for mmap() wrappers of zzip/__mmap.h */
-+#endif
- long unused; /* - for later extensions (might be renamed) */
- long code; /* - free for applications (use this!) */
- };
-diff -ur zziplib-0.13.68.orig/zzip/plugin.c zziplib-0.13.68/zzip/plugin.c
---- zziplib-0.13.68.orig/zzip/plugin.c Tue Feb 06 05:00:56 2018
-+++ zziplib-0.13.68/zzip/plugin.c Tue Feb 06 08:40:30 2018
-@@ -38,7 +38,7 @@
- return st.st_size;
- }
-
--static const struct zzip_plugin_io default_io = {
-+static struct zzip_plugin_io default_io = {
- &open,
- &close,
- &_zzip_read,
-diff -ur zziplib-0.13.68.orig/zzip/plugin.h zziplib-0.13.68/zzip/plugin.h
---- zziplib-0.13.68.orig/zzip/plugin.h Tue Feb 06 05:00:56 2018
-+++ zziplib-0.13.68/zzip/plugin.h Tue Feb 06 08:41:43 2018
-@@ -42,7 +42,11 @@
- zzip_ssize_t (*read)(int fd, void* buf, zzip_size_t len);
- zzip_off_t (*seeks)(int fd, zzip_off_t offset, int whence);
- zzip_off_t (*filesize)(int fd);
-+#ifdef _WIN64
-+ __int64 sys;
-+#else
- long sys;
-+#endif
- long type;
- zzip_ssize_t (*write)(int fd, _zzip_const void* buf, zzip_size_t len);
- };
Deleted: trunk/Build/source/libs/zziplib/TLpatches/patch-03-w64-ptr
===================================================================
--- trunk/Build/source/libs/zziplib/TLpatches/patch-03-w64-ptr 2018-03-17 22:23:43 UTC (rev 47003)
+++ trunk/Build/source/libs/zziplib/TLpatches/patch-03-w64-ptr 2018-03-18 00:25:18 UTC (rev 47004)
@@ -1,26 +0,0 @@
-diff -ur zziplib-0.13.68.orig/zzip/zip.c zziplib-0.13.68/zzip/zip.c
---- zziplib-0.13.68.orig/zzip/zip.c Tue Feb 06 05:00:56 2018
-+++ zziplib-0.13.68/zzip/zip.c Tue Feb 06 08:29:37 2018
-@@ -381,15 +381,19 @@
- * making pointer alignments to values that can be handled as structures
- * is tricky. We assume here that an align(4) is sufficient even for
- * 64 bit machines. Note that binary operations are not usually allowed
-- * to pointer types but we do need only the lower bits in this implementation,
-- * so we can just cast the value to a long value.
-+ * to pointer types but we can cast the value to a suitably sized integer.
- */
- _zzip_inline static char *
- __zzip_aligned4(char *p)
- {
- #define aligned4 __zzip_aligned4
-- p += ((long) p) & 1; /* warnings about truncation of a "pointer" */
-- p += ((long) p) & 2; /* to a "long int" may be safely ignored :) */
-+#ifdef _WIN64
-+ p += ((__int64) p) & 1;
-+ p += ((__int64) p) & 2;
-+#else
-+ p += ((long) p) & 1;
-+ p += ((long) p) & 2;
-+#endif
- return p;
- }
Deleted: trunk/Build/source/libs/zziplib/TLpatches/patch-04-strnlen
===================================================================
--- trunk/Build/source/libs/zziplib/TLpatches/patch-04-strnlen 2018-03-17 22:23:43 UTC (rev 47003)
+++ trunk/Build/source/libs/zziplib/TLpatches/patch-04-strnlen 2018-03-18 00:25:18 UTC (rev 47004)
@@ -1,20 +0,0 @@
-diff -ur zziplib-0.13.68.orig/zzip/__string.h zziplib-0.13.68/zzip/__string.h
---- zziplib-0.13.68.orig/zzip/__string.h Tue Feb 06 05:00:56 2018
-+++ zziplib-0.13.68/zzip/__string.h Thu Mar 01 12:13:00 2018
-@@ -18,6 +18,16 @@
- #define _zzip_strndup strndup
- #else
-
-+static size_t my_strnlen(const char* str, size_t maxlen)
-+{
-+ char *p = memchr(str, 0, maxlen);
-+ if (p == NULL)
-+ return maxlen;
-+ else
-+ return (p - str);
-+}
-+#define strnlen(x,y) my_strnlen((x),(y))
-+
- /* if your system does not have strndup: */
- zzip__new__ static char *
- _zzip_strndup(char const *p, size_t maxlen)
Added: trunk/Build/source/libs/zziplib/TLpatches/patch-05-no-const
===================================================================
--- trunk/Build/source/libs/zziplib/TLpatches/patch-05-no-const (rev 0)
+++ trunk/Build/source/libs/zziplib/TLpatches/patch-05-no-const 2018-03-18 00:25:18 UTC (rev 47004)
@@ -0,0 +1,12 @@
+diff -ur zziplib-0.13.69/zzip/plugin.c zziplib-src/zzip/plugin.c
+--- zziplib-0.13.69/zzip/plugin.c Sat Mar 17 21:46:45 2018
++++ zziplib-src/zzip/plugin.c Sun Mar 18 08:04:42 2018
+@@ -41,7 +41,7 @@
+ return st.st_size;
+ }
+
+-static const struct zzip_plugin_io default_io = {
++static struct zzip_plugin_io default_io = {
+ &open,
+ &close,
+ &_zzip_read,
Modified: trunk/Build/source/libs/zziplib/config.h.in
===================================================================
--- trunk/Build/source/libs/zziplib/config.h.in 2018-03-17 22:23:43 UTC (rev 47003)
+++ trunk/Build/source/libs/zziplib/config.h.in 2018-03-18 00:25:18 UTC (rev 47004)
@@ -52,6 +52,9 @@
/* Define to 1 if you have the `strndup' function. */
#undef HAVE_STRNDUP
+/* Define to 1 if you have the `strnlen' function. */
+#undef HAVE_STRNLEN
+
/* Define to 1 if you have the <sys/dir.h> header file, and it defines `DIR'.
*/
#undef HAVE_SYS_DIR_H
Modified: trunk/Build/source/libs/zziplib/configure
===================================================================
--- trunk/Build/source/libs/zziplib/configure 2018-03-17 22:23:43 UTC (rev 47003)
+++ trunk/Build/source/libs/zziplib/configure 2018-03-18 00:25:18 UTC (rev 47004)
@@ -1,6 +1,6 @@
#! /bin/sh
# Guess values for system-dependent variables and create Makefiles.
-# Generated by GNU Autoconf 2.69 for zziplib (TeX Live) 0.13.68.
+# Generated by GNU Autoconf 2.69 for zziplib (TeX Live) 0.13.69.
#
# Report bugs to <tex-k at tug.org>.
#
@@ -580,8 +580,8 @@
# Identity of this package.
PACKAGE_NAME='zziplib (TeX Live)'
PACKAGE_TARNAME='zziplib--tex-live-'
-PACKAGE_VERSION='0.13.68'
-PACKAGE_STRING='zziplib (TeX Live) 0.13.68'
+PACKAGE_VERSION='0.13.69'
+PACKAGE_STRING='zziplib (TeX Live) 0.13.69'
PACKAGE_BUGREPORT='tex-k at tug.org'
PACKAGE_URL=''
@@ -1295,7 +1295,7 @@
# Omit some internal or obsolete options to make the list less imposing.
# This message is too long to be a string in the A/UX 3.1 sh.
cat <<_ACEOF
-\`configure' configures zziplib (TeX Live) 0.13.68 to adapt to many kinds of systems.
+\`configure' configures zziplib (TeX Live) 0.13.69 to adapt to many kinds of systems.
Usage: $0 [OPTION]... [VAR=VALUE]...
@@ -1366,7 +1366,7 @@
if test -n "$ac_init_help"; then
case $ac_init_help in
- short | recursive ) echo "Configuration of zziplib (TeX Live) 0.13.68:";;
+ short | recursive ) echo "Configuration of zziplib (TeX Live) 0.13.69:";;
esac
cat <<\_ACEOF
@@ -1472,7 +1472,7 @@
test -n "$ac_init_help" && exit $ac_status
if $ac_init_version; then
cat <<\_ACEOF
-zziplib (TeX Live) configure 0.13.68
+zziplib (TeX Live) configure 0.13.69
generated by GNU Autoconf 2.69
Copyright (C) 2012 Free Software Foundation, Inc.
@@ -2078,7 +2078,7 @@
This file contains any messages produced by compilers while
running configure, to aid debugging if configure makes a mistake.
-It was created by zziplib (TeX Live) $as_me 0.13.68, which was
+It was created by zziplib (TeX Live) $as_me 0.13.69, which was
generated by GNU Autoconf 2.69. Invocation command line was
$ $0 $@
@@ -4001,7 +4001,7 @@
# Define the identity of the package.
PACKAGE='zziplib--tex-live-'
- VERSION='0.13.68'
+ VERSION='0.13.69'
cat >>confdefs.h <<_ACEOF
@@ -6668,7 +6668,7 @@
# Checks for library functions.
-for ac_func in strcasecmp strndup
+for ac_func in strcasecmp strnlen strndup
do :
as_ac_var=`$as_echo "ac_cv_func_$ac_func" | $as_tr_sh`
ac_fn_c_check_func "$LINENO" "$ac_func" "$as_ac_var"
@@ -7366,7 +7366,7 @@
# report actual input values of CONFIG_FILES etc. instead of their
# values after options handling.
ac_log="
-This file was extended by zziplib (TeX Live) $as_me 0.13.68, which was
+This file was extended by zziplib (TeX Live) $as_me 0.13.69, which was
generated by GNU Autoconf 2.69. Invocation command line was
CONFIG_FILES = $CONFIG_FILES
@@ -7432,7 +7432,7 @@
cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
ac_cs_config="`$as_echo "$ac_configure_args" | sed 's/^ //; s/[\\""\`\$]/\\\\&/g'`"
ac_cs_version="\\
-zziplib (TeX Live) config.status 0.13.68
+zziplib (TeX Live) config.status 0.13.69
configured by $0, generated by GNU Autoconf 2.69,
with options \\"\$ac_cs_config\\"
Modified: trunk/Build/source/libs/zziplib/configure.ac
===================================================================
--- trunk/Build/source/libs/zziplib/configure.ac 2018-03-17 22:23:43 UTC (rev 47003)
+++ trunk/Build/source/libs/zziplib/configure.ac 2018-03-18 00:25:18 UTC (rev 47004)
@@ -64,7 +64,7 @@
ZZIPLIB_CHECK_ALIGNED_ACCESS
# Checks for library functions.
-AC_CHECK_FUNCS([strcasecmp strndup])
+AC_CHECK_FUNCS([strcasecmp strnlen strndup])
KPSE_ZLIB_FLAGS
Modified: trunk/Build/source/libs/zziplib/version.ac
===================================================================
--- trunk/Build/source/libs/zziplib/version.ac 2018-03-17 22:23:43 UTC (rev 47003)
+++ trunk/Build/source/libs/zziplib/version.ac 2018-03-18 00:25:18 UTC (rev 47004)
@@ -8,4 +8,4 @@
dnl --------------------------------------------------------
dnl
dnl m4-include this file to define the current zziplib version
-m4_define([zziplib_version], [0.13.68])
+m4_define([zziplib_version], [0.13.69])
Modified: trunk/Build/source/libs/zziplib/zziplib-src/ChangeLog
===================================================================
--- trunk/Build/source/libs/zziplib/zziplib-src/ChangeLog 2018-03-17 22:23:43 UTC (rev 47003)
+++ trunk/Build/source/libs/zziplib/zziplib-src/ChangeLog 2018-03-18 00:25:18 UTC (rev 47004)
@@ -1,3 +1,19 @@
+2018-03-15 guidod <guidod at gmx.de>
+ * fix a number of CVEs reported with special *.zip PoC files
+ * man-pages are generated with new dbk2man.py - docbook xmlto is optional now
+ * completing some doc strings while checking the new man-pages to look good
+ * allow the zziptests.py testsuite to run with an installed /bin path
+ * try to fix some issues on testing with non-installed binaries on non-linux platfors
+ * update autotools to allow compiling on some newer Mac / Win machines
+ * a zip-program is still required for testing, but some errors are gone when not there
+ * complete the approximation of fnmatch for the test binaries (on platforms without)
+ * allow windows __mmap.h to be simpler, helping with some problems on MingW
+ * integrate 'fopen("wb")' from TexLive to be more portable across
+ * more portability as well for helpers like strnlen being used in the sources
+ * update doc refs to point to github instead of sf.net
+ * update the sf.net pages to have a prominent hint on newer github.com location
+ * release v0.13.69
+
2018-02-02 guidod <guidod at gmx.de>
* fix a number of CVEs reported with special *.zip files
* the testsuite has been expanded to cover all the CVEs
Modified: trunk/Build/source/libs/zziplib/zziplib-src/Makefile.in
===================================================================
--- trunk/Build/source/libs/zziplib/zziplib-src/Makefile.in 2018-03-17 22:23:43 UTC (rev 47003)
+++ trunk/Build/source/libs/zziplib/zziplib-src/Makefile.in 2018-03-18 00:25:18 UTC (rev 47004)
@@ -1,7 +1,7 @@
-# Makefile.in generated by automake 1.13.4 from Makefile.am.
+# Makefile.in generated by automake 1.15.1 from Makefile.am.
# @configure_input@
-# Copyright (C) 1994-2013 Free Software Foundation, Inc.
+# Copyright (C) 1994-2017 Free Software Foundation, Inc.
# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
@@ -14,7 +14,17 @@
@SET_MAKE@
VPATH = @srcdir@
-am__is_gnu_make = test -n '$(MAKEFILE_LIST)' && test -n '$(MAKELEVEL)'
+am__is_gnu_make = { \
+ if test -z '$(MAKELEVEL)'; then \
+ false; \
+ elif test -n '$(MAKE_HOST)'; then \
+ true; \
+ elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \
+ true; \
+ else \
+ false; \
+ fi; \
+}
am__make_running_with_option = \
case $${target_option-} in \
?) ;; \
@@ -79,15 +89,6 @@
host_triplet = @host@
target_triplet = @target@
subdir = .
-DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/Makefile.am \
- $(top_srcdir)/configure $(am__configure_deps) \
- $(srcdir)/config.h.in $(top_srcdir)/uses/mkinstalldirs \
- COPYING.LIB ChangeLog README TODO uses/config.guess \
- uses/config.sub uses/depcomp uses/install-sh uses/missing \
- uses/mkinstalldirs uses/ltmain.sh \
- $(top_srcdir)/uses/config.guess $(top_srcdir)/uses/config.sub \
- $(top_srcdir)/uses/install-sh $(top_srcdir)/uses/ltmain.sh \
- $(top_srcdir)/uses/missing
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
am__aclocal_m4_deps = $(top_srcdir)/m4/ac_compile_check_sizeof.m4 \
$(top_srcdir)/m4/ac_set_default_paths_system.m4 \
@@ -98,6 +99,7 @@
$(top_srcdir)/m4/ax_cflags_strict_prototypes.m4 \
$(top_srcdir)/m4/ax_cflags_warn_all.m4 \
$(top_srcdir)/m4/ax_check_aligned_access_required.m4 \
+ $(top_srcdir)/m4/ax_check_enable_debug.m4 \
$(top_srcdir)/m4/ax_configure_args.m4 \
$(top_srcdir)/m4/ax_create_pkgconfig_info.m4 \
$(top_srcdir)/m4/ax_enable_builddir.m4 \
@@ -120,6 +122,8 @@
$(top_srcdir)/configure.ac
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
$(ACLOCAL_M4)
+DIST_COMMON = $(srcdir)/Makefile.am $(top_srcdir)/configure \
+ $(am__configure_deps) $(am__DIST_COMMON)
am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
configure.lineno config.status.lineno
mkinstalldirs = $(SHELL) $(top_srcdir)/uses/mkinstalldirs
@@ -182,6 +186,14 @@
ETAGS = etags
CTAGS = ctags
CSCOPE = cscope
+am__DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/config.h.in \
+ $(top_srcdir)/uses/compile $(top_srcdir)/uses/config.guess \
+ $(top_srcdir)/uses/config.sub $(top_srcdir)/uses/install-sh \
+ $(top_srcdir)/uses/ltmain.sh $(top_srcdir)/uses/missing \
+ $(top_srcdir)/uses/mkinstalldirs COPYING.LIB ChangeLog README \
+ TODO uses/compile uses/config.guess uses/config.sub \
+ uses/depcomp uses/install-sh uses/ltmain.sh uses/missing \
+ uses/mkinstalldirs
DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
distdir = $(PACKAGE)-$(VERSION)
top_distdir = $(distdir)
@@ -229,6 +241,8 @@
AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
AR = @AR@
AS = @AS@
+ASAN_CFLAGS = @ASAN_CFLAGS@
+ASAN_LIBS = @ASAN_LIBS@
AUTOCONF = @AUTOCONF@
AUTOHEADER = @AUTOHEADER@
AUTOMAKE = @AUTOMAKE@
@@ -268,8 +282,10 @@
LIPO = @LIPO@
LN_S = @LN_S@
LTLIBOBJS = @LTLIBOBJS@
+LT_SYS_LIBRARY_PATH = @LT_SYS_LIBRARY_PATH@
MAINT = @MAINT@
MAKEINFO = @MAKEINFO@
+MANIFEST_TOOL = @MANIFEST_TOOL@
MKDIR_P = @MKDIR_P@
MKZIP = @MKZIP@
NM = @NM@
@@ -315,6 +331,7 @@
abs_srcdir = @abs_srcdir@
abs_top_builddir = @abs_top_builddir@
abs_top_srcdir = @abs_top_srcdir@
+ac_ct_AR = @ac_ct_AR@
ac_ct_CC = @ac_ct_CC@
ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
aclocaldir = @aclocaldir@
@@ -349,7 +366,6 @@
libexecdir = @libexecdir@
localedir = @localedir@
localstatedir = @localstatedir@
-lt_ECHO = @lt_ECHO@
mandir = @mandir@
mkdir_p = @mkdir_p@
oldincludedir = @oldincludedir@
@@ -441,7 +457,6 @@
echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign Makefile'; \
$(am__cd) $(top_srcdir) && \
$(AUTOMAKE) --foreign Makefile
-.PRECIOUS: Makefile
Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
@case '$?' in \
*config.status*) \
@@ -462,8 +477,8 @@
$(am__aclocal_m4_deps):
config.h: stamp-h1
- @if test ! -f $@; then rm -f stamp-h1; else :; fi
- @if test ! -f $@; then $(MAKE) $(AM_MAKEFLAGS) stamp-h1; else :; fi
+ @test -f $@ || rm -f stamp-h1
+ @test -f $@ || $(MAKE) $(AM_MAKEFLAGS) stamp-h1
stamp-h1: $(srcdir)/config.h.in $(top_builddir)/config.status
@rm -f stamp-h1
@@ -656,7 +671,7 @@
! -type d ! -perm -444 -exec $(install_sh) -c -m a+r {} {} \; \
|| chmod -R a+r "$(distdir)"
dist-gzip: distdir
- tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
+ tardir=$(distdir) && $(am__tar) | eval GZIP= gzip $(GZIP_ENV) -c >$(distdir).tar.gz
$(am__post_remove_distdir)
dist-bzip2: distdir
tardir=$(distdir) && $(am__tar) | BZIP2=$${BZIP2--9} bzip2 -c >$(distdir).tar.bz2
@@ -671,11 +686,17 @@
$(am__post_remove_distdir)
dist-tarZ: distdir
+ @echo WARNING: "Support for distribution archives compressed with" \
+ "legacy program 'compress' is deprecated." >&2
+ @echo WARNING: "It will be removed altogether in Automake 2.0" >&2
tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z
$(am__post_remove_distdir)
dist-shar: distdir
- shar $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).shar.gz
+ @echo WARNING: "Support for shar distribution archives is" \
+ "deprecated." >&2
+ @echo WARNING: "It will be removed altogether in Automake 2.0" >&2
+ shar $(distdir) | eval GZIP= gzip $(GZIP_ENV) -c >$(distdir).shar.gz
$(am__post_remove_distdir)
dist-zip: distdir
@@ -693,7 +714,7 @@
distcheck: dist
case '$(DIST_ARCHIVES)' in \
*.tar.gz*) \
- GZIP=$(GZIP_ENV) gzip -dc $(distdir).tar.gz | $(am__untar) ;;\
+ eval GZIP= gzip $(GZIP_ENV) -dc $(distdir).tar.gz | $(am__untar) ;;\
*.tar.bz2*) \
bzip2 -dc $(distdir).tar.bz2 | $(am__untar) ;;\
*.tar.lz*) \
@@ -703,22 +724,23 @@
*.tar.Z*) \
uncompress -c $(distdir).tar.Z | $(am__untar) ;;\
*.shar.gz*) \
- GZIP=$(GZIP_ENV) gzip -dc $(distdir).shar.gz | unshar ;;\
+ eval GZIP= gzip $(GZIP_ENV) -dc $(distdir).shar.gz | unshar ;;\
*.zip*) \
unzip $(distdir).zip ;;\
esac
chmod -R a-w $(distdir)
chmod u+w $(distdir)
- mkdir $(distdir)/_build $(distdir)/_inst
+ mkdir $(distdir)/_build $(distdir)/_build/sub $(distdir)/_inst
chmod a-w $(distdir)
test -d $(distdir)/_build || exit 0; \
dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \
&& dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \
&& am__cwd=`pwd` \
- && $(am__cd) $(distdir)/_build \
- && ../configure --srcdir=.. --prefix="$$dc_install_base" \
+ && $(am__cd) $(distdir)/_build/sub \
+ && ../../configure \
$(AM_DISTCHECK_CONFIGURE_FLAGS) \
$(DISTCHECK_CONFIGURE_FLAGS) \
+ --srcdir=../.. --prefix="$$dc_install_base" \
&& $(MAKE) $(AM_MAKEFLAGS) \
&& $(MAKE) $(AM_MAKEFLAGS) dvi \
&& $(MAKE) $(AM_MAKEFLAGS) check \
@@ -895,7 +917,9 @@
mostlyclean-libtool pdf pdf-am ps ps-am tags tags-am uninstall \
uninstall-am
+.PRECIOUS: Makefile
+
rpm: dist-bzip2 $(PACKAGE).spec
rpmbuild -ta $(PACKAGE)-$(VERSION).tar.bz2
test -d ../pub && cp $(PACKAGE)-$(VERSION).tar.bz2 ../pub/
Modified: trunk/Build/source/libs/zziplib/zziplib-src/README
===================================================================
--- trunk/Build/source/libs/zziplib/zziplib-src/README 2018-03-17 22:23:43 UTC (rev 47003)
+++ trunk/Build/source/libs/zziplib/zziplib-src/README 2018-03-18 00:25:18 UTC (rev 47004)
@@ -12,7 +12,7 @@
COPYING
The zziplib may be used freely under the restrictions of the
- GNU Lesser General Public License version 2 or later. Alternativly
+ GNU Lesser General Public License version 2 or later. Alternatively
the Mozilla Public license can be chosen. The sources are under
a dual license, as long as the MPL hint is not removed, the modified
files will be again under a dual license for the final recipient.
Modified: trunk/Build/source/libs/zziplib/zziplib-src/SDL/Makefile.in
===================================================================
--- trunk/Build/source/libs/zziplib/zziplib-src/SDL/Makefile.in 2018-03-17 22:23:43 UTC (rev 47003)
+++ trunk/Build/source/libs/zziplib/zziplib-src/SDL/Makefile.in 2018-03-18 00:25:18 UTC (rev 47004)
@@ -1,7 +1,7 @@
-# Makefile.in generated by automake 1.13.4 from Makefile.am.
+# Makefile.in generated by automake 1.15.1 from Makefile.am.
# @configure_input@
-# Copyright (C) 1994-2013 Free Software Foundation, Inc.
+# Copyright (C) 1994-2017 Free Software Foundation, Inc.
# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
@@ -16,7 +16,17 @@
VPATH = @srcdir@
-am__is_gnu_make = test -n '$(MAKEFILE_LIST)' && test -n '$(MAKELEVEL)'
+am__is_gnu_make = { \
+ if test -z '$(MAKELEVEL)'; then \
+ false; \
+ elif test -n '$(MAKE_HOST)'; then \
+ true; \
+ elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \
+ true; \
+ else \
+ false; \
+ fi; \
+}
am__make_running_with_option = \
case $${target_option-} in \
?) ;; \
@@ -82,9 +92,6 @@
target_triplet = @target@
check_PROGRAMS = zzcatsdl$(EXEEXT)
subdir = SDL
-DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/Makefile.am \
- $(top_srcdir)/uses/mkinstalldirs $(top_srcdir)/uses/depcomp \
- $(pkgconfig_HEADERS)
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
am__aclocal_m4_deps = $(top_srcdir)/m4/ac_compile_check_sizeof.m4 \
$(top_srcdir)/m4/ac_set_default_paths_system.m4 \
@@ -95,6 +102,7 @@
$(top_srcdir)/m4/ax_cflags_strict_prototypes.m4 \
$(top_srcdir)/m4/ax_cflags_warn_all.m4 \
$(top_srcdir)/m4/ax_check_aligned_access_required.m4 \
+ $(top_srcdir)/m4/ax_check_enable_debug.m4 \
$(top_srcdir)/m4/ax_configure_args.m4 \
$(top_srcdir)/m4/ax_create_pkgconfig_info.m4 \
$(top_srcdir)/m4/ax_enable_builddir.m4 \
@@ -117,6 +125,8 @@
$(top_srcdir)/configure.ac
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
$(ACLOCAL_M4)
+DIST_COMMON = $(srcdir)/Makefile.am $(pkgconfig_HEADERS) \
+ $(am__DIST_COMMON)
mkinstalldirs = $(SHELL) $(top_srcdir)/uses/mkinstalldirs
CONFIG_HEADER = $(top_builddir)/config.h
CONFIG_CLEAN_FILES =
@@ -220,6 +230,8 @@
done | $(am__uniquify_input)`
ETAGS = etags
CTAGS = ctags
+am__DIST_COMMON = $(srcdir)/Makefile.in $(top_srcdir)/uses/depcomp \
+ $(top_srcdir)/uses/mkinstalldirs
DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
ACLOCAL = @ACLOCAL@
AMTAR = @AMTAR@
@@ -226,6 +238,8 @@
AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
AR = @AR@
AS = @AS@
+ASAN_CFLAGS = @ASAN_CFLAGS@
+ASAN_LIBS = @ASAN_LIBS@
AUTOCONF = @AUTOCONF@
AUTOHEADER = @AUTOHEADER@
AUTOMAKE = @AUTOMAKE@
@@ -265,8 +279,10 @@
LIPO = @LIPO@
LN_S = @LN_S@
LTLIBOBJS = @LTLIBOBJS@
+LT_SYS_LIBRARY_PATH = @LT_SYS_LIBRARY_PATH@
MAINT = @MAINT@
MAKEINFO = @MAKEINFO@
+MANIFEST_TOOL = @MANIFEST_TOOL@
MKDIR_P = @MKDIR_P@
MKZIP = @MKZIP@
NM = @NM@
@@ -312,6 +328,7 @@
abs_srcdir = @abs_srcdir@
abs_top_builddir = @abs_top_builddir@
abs_top_srcdir = @abs_top_srcdir@
+ac_ct_AR = @ac_ct_AR@
ac_ct_CC = @ac_ct_CC@
ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
aclocaldir = @aclocaldir@
@@ -346,7 +363,6 @@
libexecdir = @libexecdir@
localedir = @localedir@
localstatedir = @localstatedir@
-lt_ECHO = @lt_ECHO@
mandir = @mandir@
mkdir_p = @mkdir_p@
oldincludedir = @oldincludedir@
@@ -400,7 +416,6 @@
echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign SDL/Makefile'; \
$(am__cd) $(top_srcdir) && \
$(AUTOMAKE) --foreign SDL/Makefile
-.PRECIOUS: Makefile
Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
@case '$?' in \
*config.status*) \
@@ -446,7 +461,7 @@
@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
- at am__fastdepCC_FALSE@ $(AM_V_CC at am__nodep@)$(COMPILE) -c $<
+ at am__fastdepCC_FALSE@ $(AM_V_CC at am__nodep@)$(COMPILE) -c -o $@ $<
.c.obj:
@am__fastdepCC_TRUE@ $(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'`
@@ -453,7 +468,7 @@
@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
- at am__fastdepCC_FALSE@ $(AM_V_CC at am__nodep@)$(COMPILE) -c `$(CYGPATH_W) '$<'`
+ at am__fastdepCC_FALSE@ $(AM_V_CC at am__nodep@)$(COMPILE) -c -o $@ `$(CYGPATH_W) '$<'`
.c.lo:
@am__fastdepCC_TRUE@ $(AM_V_CC)$(LTCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
@@ -719,7 +734,9 @@
mostlyclean-libtool pdf pdf-am ps ps-am tags tags-am uninstall \
uninstall-am uninstall-pkgconfigHEADERS uninstall-zzipsdlDATA
+.PRECIOUS: Makefile
+
default: test-sdl
*.$(OBJEXT): ../zzip/zziplib.pc
../zzip/zziplib.pc : ../zzip/Makefile
Deleted: trunk/Build/source/libs/zziplib/zziplib-src/SDL/SDL_rwops_zzip.pc
===================================================================
--- trunk/Build/source/libs/zziplib/zziplib-src/SDL/SDL_rwops_zzip.pc 2018-03-17 22:23:43 UTC (rev 47003)
+++ trunk/Build/source/libs/zziplib/zziplib-src/SDL/SDL_rwops_zzip.pc 2018-03-18 00:25:18 UTC (rev 47004)
@@ -1,8 +0,0 @@
-prefix=/usr/local
-zzipsdldir=/usr/local/include/SDL_rwops_zzip
-
-Name: SDL_rwops_zzip
-Version: 0.13.68
-Description: SDL_rwops for ZZipLib
-Requires: sdl, zziplib
-Cflags: -I${zzipsdldir}
Added: trunk/Build/source/libs/zziplib/zziplib-src/SDL/zzip-sdl-config.pc
===================================================================
--- trunk/Build/source/libs/zziplib/zziplib-src/SDL/zzip-sdl-config.pc (rev 0)
+++ trunk/Build/source/libs/zziplib/zziplib-src/SDL/zzip-sdl-config.pc 2018-03-18 00:25:18 UTC (rev 47004)
@@ -0,0 +1,10 @@
+prefix=/usr
+sdl_static_libs=-L/usr/lib -lSDL -lpthread -lm -ldl -lasound -laudio -lXt -L/usr/X11R6/lib -lX11 -lXext
+sdl_libs=-L/usr/lib -lSDL -lpthread
+sdl_cflags=-I/usr/include/SDL -D_REENTRANT
+
+Name: zzip-sdl-config
+Version: 1.2.5
+Description: SDL Config (for ZZipLib)
+Libs: ${sdl_libs}
+Cflags: ${sdl_cflags}
Added: trunk/Build/source/libs/zziplib/zziplib-src/SDL/zzip-sdl-rwops.pc
===================================================================
--- trunk/Build/source/libs/zziplib/zziplib-src/SDL/zzip-sdl-rwops.pc (rev 0)
+++ trunk/Build/source/libs/zziplib/zziplib-src/SDL/zzip-sdl-rwops.pc 2018-03-18 00:25:18 UTC (rev 47004)
@@ -0,0 +1,8 @@
+zzipdatadir=/usr/local/share/zziplib
+zzipsdlrwops=${zzipdatadir}/SDL
+
+Name: zzip-sdl-rwops
+Version: 0.13.24
+Description: SDL_rwops for ZZipLib
+Requires: zzip-sdl-config, zziplib
+Cflags: -I${zzipsdlrwops}
Modified: trunk/Build/source/libs/zziplib/zziplib-src/bins/Makefile.am
===================================================================
--- trunk/Build/source/libs/zziplib/zziplib-src/bins/Makefile.am 2018-03-17 22:23:43 UTC (rev 47003)
+++ trunk/Build/source/libs/zziplib/zziplib-src/bins/Makefile.am 2018-03-18 00:25:18 UTC (rev 47004)
@@ -2,6 +2,7 @@
AUTOTOOL_VERSION=autoconf-2.52 automake-1.5 libtool-1.4.2
DEFAULT_INCLUDES = # nothing - no default of -I. -I$(srcdir)
DEFS = @DEFS@ -I$(top_builddir) -I$(top_srcdir) # also for automake 1.4
+CFLAGS = @CFLAGS@ @ASAN_CFLAGS@
bin_PROGRAMS = zzcat zzdir zzxorcat zzxordir zzxorcopy \
unzzip unzzip-mix unzzip-mem unzzip-big unzip-mem
@@ -20,26 +21,26 @@
EXTRA_DIST = $(aclocal_DATA) $(noinst_HEADERS)
CLEANFILES = $(WCC10_CLEAN)
-zziptest_LDADD = ../zzip/libzzip.la @RESOLVES@ -lz
-zzcat_LDADD = ../zzip/libzzip.la @RESOLVES@ -lz
-zzdir_LDADD = ../zzip/libzzip.la @RESOLVES@ -lz
-zzxorcat_LDADD = ../zzip/libzzip.la @RESOLVES@ -lz
-zzxordir_LDADD = ../zzip/libzzip.la @RESOLVES@ -lz
-zzobfuscated_LDADD = ../zzip/libzzip.la @RESOLVES@ -lz
+zziptest_LDADD = ../zzip/libzzip.la @RESOLVES@ -lz @ASAN_LIBS@
+zzcat_LDADD = ../zzip/libzzip.la @RESOLVES@ -lz @ASAN_LIBS@
+zzdir_LDADD = ../zzip/libzzip.la @RESOLVES@ -lz @ASAN_LIBS@
+zzxorcat_LDADD = ../zzip/libzzip.la @RESOLVES@ -lz @ASAN_LIBS@
+zzxordir_LDADD = ../zzip/libzzip.la @RESOLVES@ -lz @ASAN_LIBS@
+zzobfuscated_LDADD = ../zzip/libzzip.la @RESOLVES@ -lz @ASAN_LIBS@
-zzip_LDADD = ../zzip/libzzip.la @RESOLVES@ -lz
+zzip_LDADD = ../zzip/libzzip.la @RESOLVES@ -lz @ASAN_LIBS@
zzip_SOURCES = zzip.c zzipmake-zip.c
-unzzip_LDADD = ../zzip/libzzip.la @RESOLVES@ -lz
+unzzip_LDADD = ../zzip/libzzip.la @RESOLVES@ -lz @ASAN_LIBS@
unzzip_SOURCES = unzzip.c unzzipcat-zip.c unzzipdir-zip.c
-unzzip_mix_LDADD = ../zzip/libzzip.la @RESOLVES@ -lz
+unzzip_mix_LDADD = ../zzip/libzzip.la @RESOLVES@ -lz @ASAN_LIBS@
unzzip_mix_SOURCES = unzzip.c unzzipcat-mix.c unzzipdir-mix.c
-unzzip_mem_LDADD = ../zzip/libzzipmmapped.la @RESOLVES@ -lz
+unzzip_mem_LDADD = ../zzip/libzzipmmapped.la @RESOLVES@ -lz @ASAN_LIBS@
unzzip_mem_SOURCES = unzzip.c unzzipcat-mem.c unzzipdir-mem.c
-unzzip_big_LDADD = ../zzip/libzzipfseeko.la @RESOLVES@ -lz
+unzzip_big_LDADD = ../zzip/libzzipfseeko.la @RESOLVES@ -lz @ASAN_LIBS@
unzzip_big_SOURCES = unzzip.c unzzipcat-big.c unzzipdir-big.c
-unzip_mem_LDADD = ../zzip/libzzipmmapped.la @RESOLVES@ -lz
+unzip_mem_LDADD = ../zzip/libzzipmmapped.la @RESOLVES@ -lz @ASAN_LIBS@
../zzip/libzzip.la : @top_srcdir@/zzip/*.c
(cd ../zzip && $(MAKE) `basename $@`)
Modified: trunk/Build/source/libs/zziplib/zziplib-src/bins/Makefile.in
===================================================================
--- trunk/Build/source/libs/zziplib/zziplib-src/bins/Makefile.in 2018-03-17 22:23:43 UTC (rev 47003)
+++ trunk/Build/source/libs/zziplib/zziplib-src/bins/Makefile.in 2018-03-18 00:25:18 UTC (rev 47004)
@@ -1,7 +1,7 @@
-# Makefile.in generated by automake 1.13.4 from Makefile.am.
+# Makefile.in generated by automake 1.15.1 from Makefile.am.
# @configure_input@
-# Copyright (C) 1994-2013 Free Software Foundation, Inc.
+# Copyright (C) 1994-2017 Free Software Foundation, Inc.
# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
@@ -17,7 +17,17 @@
VPATH = @srcdir@
-am__is_gnu_make = test -n '$(MAKEFILE_LIST)' && test -n '$(MAKELEVEL)'
+am__is_gnu_make = { \
+ if test -z '$(MAKELEVEL)'; then \
+ false; \
+ elif test -n '$(MAKE_HOST)'; then \
+ true; \
+ elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \
+ true; \
+ else \
+ false; \
+ fi; \
+}
am__make_running_with_option = \
case $${target_option-} in \
?) ;; \
@@ -88,9 +98,6 @@
noinst_PROGRAMS = zziptest$(EXEEXT) zzobfuscated$(EXEEXT) \
zzip$(EXEEXT)
subdir = bins
-DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/Makefile.am \
- $(top_srcdir)/uses/mkinstalldirs $(top_srcdir)/uses/depcomp \
- $(noinst_HEADERS)
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
am__aclocal_m4_deps = $(top_srcdir)/m4/ac_compile_check_sizeof.m4 \
$(top_srcdir)/m4/ac_set_default_paths_system.m4 \
@@ -101,6 +108,7 @@
$(top_srcdir)/m4/ax_cflags_strict_prototypes.m4 \
$(top_srcdir)/m4/ax_cflags_warn_all.m4 \
$(top_srcdir)/m4/ax_check_aligned_access_required.m4 \
+ $(top_srcdir)/m4/ax_check_enable_debug.m4 \
$(top_srcdir)/m4/ax_configure_args.m4 \
$(top_srcdir)/m4/ax_create_pkgconfig_info.m4 \
$(top_srcdir)/m4/ax_enable_builddir.m4 \
@@ -123,6 +131,8 @@
$(top_srcdir)/configure.ac
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
$(ACLOCAL_M4)
+DIST_COMMON = $(srcdir)/Makefile.am $(noinst_HEADERS) \
+ $(am__DIST_COMMON)
mkinstalldirs = $(SHELL) $(top_srcdir)/uses/mkinstalldirs
CONFIG_HEADER = $(top_builddir)/config.h
CONFIG_CLEAN_FILES =
@@ -270,6 +280,8 @@
done | $(am__uniquify_input)`
ETAGS = etags
CTAGS = ctags
+am__DIST_COMMON = $(srcdir)/Makefile.in $(top_srcdir)/uses/depcomp \
+ $(top_srcdir)/uses/mkinstalldirs
DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
ACLOCAL = @ACLOCAL@
AMTAR = @AMTAR@
@@ -276,6 +288,8 @@
AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
AR = @AR@
AS = @AS@
+ASAN_CFLAGS = @ASAN_CFLAGS@
+ASAN_LIBS = @ASAN_LIBS@
AUTOCONF = @AUTOCONF@
AUTOHEADER = @AUTOHEADER@
AUTOMAKE = @AUTOMAKE@
@@ -282,7 +296,7 @@
AWK = @AWK@
CC = @CC@
CCDEPMODE = @CCDEPMODE@
-CFLAGS = @CFLAGS@
+CFLAGS = @CFLAGS@ @ASAN_CFLAGS@
CONFIG_FILES = @CONFIG_FILES@
CPP = @CPP@
CPPFLAGS = @CPPFLAGS@
@@ -315,8 +329,10 @@
LIPO = @LIPO@
LN_S = @LN_S@
LTLIBOBJS = @LTLIBOBJS@
+LT_SYS_LIBRARY_PATH = @LT_SYS_LIBRARY_PATH@
MAINT = @MAINT@
MAKEINFO = @MAKEINFO@
+MANIFEST_TOOL = @MANIFEST_TOOL@
MKDIR_P = @MKDIR_P@
MKZIP = @MKZIP@
NM = @NM@
@@ -363,6 +379,7 @@
abs_srcdir = @abs_srcdir@
abs_top_builddir = @abs_top_builddir@
abs_top_srcdir = @abs_top_srcdir@
+ac_ct_AR = @ac_ct_AR@
ac_ct_CC = @ac_ct_CC@
ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
aclocaldir = $(datadir)/aclocal
@@ -397,7 +414,6 @@
libexecdir = @libexecdir@
localedir = @localedir@
localstatedir = @localstatedir@
-lt_ECHO = @lt_ECHO@
mandir = @mandir@
mkdir_p = @mkdir_p@
oldincludedir = @oldincludedir@
@@ -429,23 +445,23 @@
noinst_HEADERS = unzzipdir-zip.h unzzipcat-zip.h unzzip-states.h zzipmake-zip.h
EXTRA_DIST = $(aclocal_DATA) $(noinst_HEADERS)
CLEANFILES = $(WCC10_CLEAN)
-zziptest_LDADD = ../zzip/libzzip.la @RESOLVES@ -lz
-zzcat_LDADD = ../zzip/libzzip.la @RESOLVES@ -lz
-zzdir_LDADD = ../zzip/libzzip.la @RESOLVES@ -lz
-zzxorcat_LDADD = ../zzip/libzzip.la @RESOLVES@ -lz
-zzxordir_LDADD = ../zzip/libzzip.la @RESOLVES@ -lz
-zzobfuscated_LDADD = ../zzip/libzzip.la @RESOLVES@ -lz
-zzip_LDADD = ../zzip/libzzip.la @RESOLVES@ -lz
+zziptest_LDADD = ../zzip/libzzip.la @RESOLVES@ -lz @ASAN_LIBS@
+zzcat_LDADD = ../zzip/libzzip.la @RESOLVES@ -lz @ASAN_LIBS@
+zzdir_LDADD = ../zzip/libzzip.la @RESOLVES@ -lz @ASAN_LIBS@
+zzxorcat_LDADD = ../zzip/libzzip.la @RESOLVES@ -lz @ASAN_LIBS@
+zzxordir_LDADD = ../zzip/libzzip.la @RESOLVES@ -lz @ASAN_LIBS@
+zzobfuscated_LDADD = ../zzip/libzzip.la @RESOLVES@ -lz @ASAN_LIBS@
+zzip_LDADD = ../zzip/libzzip.la @RESOLVES@ -lz @ASAN_LIBS@
zzip_SOURCES = zzip.c zzipmake-zip.c
-unzzip_LDADD = ../zzip/libzzip.la @RESOLVES@ -lz
+unzzip_LDADD = ../zzip/libzzip.la @RESOLVES@ -lz @ASAN_LIBS@
unzzip_SOURCES = unzzip.c unzzipcat-zip.c unzzipdir-zip.c
-unzzip_mix_LDADD = ../zzip/libzzip.la @RESOLVES@ -lz
+unzzip_mix_LDADD = ../zzip/libzzip.la @RESOLVES@ -lz @ASAN_LIBS@
unzzip_mix_SOURCES = unzzip.c unzzipcat-mix.c unzzipdir-mix.c
-unzzip_mem_LDADD = ../zzip/libzzipmmapped.la @RESOLVES@ -lz
+unzzip_mem_LDADD = ../zzip/libzzipmmapped.la @RESOLVES@ -lz @ASAN_LIBS@
unzzip_mem_SOURCES = unzzip.c unzzipcat-mem.c unzzipdir-mem.c
-unzzip_big_LDADD = ../zzip/libzzipfseeko.la @RESOLVES@ -lz
+unzzip_big_LDADD = ../zzip/libzzipfseeko.la @RESOLVES@ -lz @ASAN_LIBS@
unzzip_big_SOURCES = unzzip.c unzzipcat-big.c unzzipdir-big.c
-unzip_mem_LDADD = ../zzip/libzzipmmapped.la @RESOLVES@ -lz
+unzip_mem_LDADD = ../zzip/libzzipmmapped.la @RESOLVES@ -lz @ASAN_LIBS@
all: all-am
.SUFFIXES:
@@ -462,7 +478,6 @@
echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign bins/Makefile'; \
$(am__cd) $(top_srcdir) && \
$(AUTOMAKE) --foreign bins/Makefile
-.PRECIOUS: Makefile
Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
@case '$?' in \
*config.status*) \
@@ -622,7 +637,7 @@
@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
- at am__fastdepCC_FALSE@ $(AM_V_CC at am__nodep@)$(COMPILE) -c $<
+ at am__fastdepCC_FALSE@ $(AM_V_CC at am__nodep@)$(COMPILE) -c -o $@ $<
.c.obj:
@am__fastdepCC_TRUE@ $(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'`
@@ -629,7 +644,7 @@
@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
- at am__fastdepCC_FALSE@ $(AM_V_CC at am__nodep@)$(COMPILE) -c `$(CYGPATH_W) '$<'`
+ at am__fastdepCC_FALSE@ $(AM_V_CC at am__nodep@)$(COMPILE) -c -o $@ `$(CYGPATH_W) '$<'`
.c.lo:
@am__fastdepCC_TRUE@ $(AM_V_CC)$(LTCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
@@ -874,7 +889,9 @@
tags tags-am uninstall uninstall-aclocalDATA uninstall-am \
uninstall-binPROGRAMS
+.PRECIOUS: Makefile
+
../zzip/libzzip.la : @top_srcdir@/zzip/*.c
(cd ../zzip && $(MAKE) `basename $@`)
Modified: trunk/Build/source/libs/zziplib/zziplib-src/bins/unzip-mem.c
===================================================================
--- trunk/Build/source/libs/zziplib/zziplib-src/bins/unzip-mem.c 2018-03-17 22:23:43 UTC (rev 47003)
+++ trunk/Build/source/libs/zziplib/zziplib-src/bins/unzip-mem.c 2018-03-18 00:25:18 UTC (rev 47004)
@@ -8,6 +8,7 @@
#include <zlib.h> /* crc32 */
#include <zzip/memdisk.h>
+#include <zzip/__fnmatch.h>
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
@@ -21,12 +22,6 @@
#include <time.h>
-#ifdef ZZIP_HAVE_FNMATCH_H
-#include <fnmatch.h>
-#else
-#define fnmatch(x,y,z) strcmp(x,y)
-#endif
-
#define ___ {
#define ____ }
Modified: trunk/Build/source/libs/zziplib/zziplib-src/bins/unzzipcat-big.c
===================================================================
--- trunk/Build/source/libs/zziplib/zziplib-src/bins/unzzipcat-big.c 2018-03-17 22:23:43 UTC (rev 47003)
+++ trunk/Build/source/libs/zziplib/zziplib-src/bins/unzzipcat-big.c 2018-03-18 00:25:18 UTC (rev 47004)
@@ -136,7 +136,7 @@
char* name = zzip_entry_strdup_name (entry);
DBG3(".. check '%s' to zip '%s'", argv[argn], name);
if (! _zzip_fnmatch (argv[argn], name,
- FNM_NOESCAPE|FNM_PATHNAME|FNM_PERIOD))
+ _zzip_FNM_NOESCAPE|_zzip_FNM_PATHNAME|_zzip_FNM_PERIOD))
{
FILE* out = stdout;
if (extract) out = create_fopen(name, "wb", 1);
Modified: trunk/Build/source/libs/zziplib/zziplib-src/bins/unzzipcat-mem.c
===================================================================
--- trunk/Build/source/libs/zziplib/zziplib-src/bins/unzzipcat-mem.c 2018-03-17 22:23:43 UTC (rev 47003)
+++ trunk/Build/source/libs/zziplib/zziplib-src/bins/unzzipcat-mem.c 2018-03-18 00:25:18 UTC (rev 47004)
@@ -89,7 +89,7 @@
static int unzzip_cat (int argc, char ** argv, int extract)
{
- int done;
+ int done = 0;
int argn;
ZZIP_MEM_DISK* disk;
@@ -116,16 +116,17 @@
FILE* out = stdout;
if (extract) out = create_fopen(name, "wb", 1);
if (! out) {
- if (errno != EISDIR) done = EXIT_ERRORS;
+ if (errno != EISDIR) {
+ DBG3("can not open output file %i %s", errno, strerror(errno));
+ done = EXIT_ERRORS;
+ }
continue;
}
unzzip_mem_disk_cat_file (disk, name, out);
if (extract) fclose(out);
}
- return done;
- }
-
- if (argc == 3 && !extract)
+ }
+ else if (argc == 3 && !extract)
{ /* list from one spec */
ZZIP_MEM_ENTRY* entry = 0;
while ((entry = zzip_mem_disk_findmatch(disk, argv[2], entry, 0, 0)))
@@ -132,31 +133,33 @@
{
unzzip_mem_entry_fprint (disk, entry, stdout);
}
-
- return 0;
- }
-
- for (argn=1; argn < argc; argn++)
- { /* list only the matching entries - each in order of commandline */
- ZZIP_MEM_ENTRY* entry = zzip_mem_disk_findfirst(disk);
- for (; entry ; entry = zzip_mem_disk_findnext(disk, entry))
- {
- char* name = zzip_mem_entry_to_name (entry);
- if (! _zzip_fnmatch (argv[argn], name,
- FNM_NOESCAPE|FNM_PATHNAME|FNM_PERIOD))
+ } else {
+ for (argn=1; argn < argc; argn++)
+ { /* list only the matching entries - each in order of commandline */
+ ZZIP_MEM_ENTRY* entry = zzip_mem_disk_findfirst(disk);
+ for (; entry ; entry = zzip_mem_disk_findnext(disk, entry))
{
- FILE* out = stdout;
- if (extract) out = create_fopen(name, "wb", 1);
- if (! out) {
- if (errno != EISDIR) done = EXIT_ERRORS;
- continue;
- }
- unzzip_mem_disk_cat_file (disk, name, out);
- if (extract) fclose(out);
- break; /* match loop */
+ char* name = zzip_mem_entry_to_name (entry);
+ if (! _zzip_fnmatch (argv[argn], name,
+ _zzip_FNM_NOESCAPE|_zzip_FNM_PATHNAME|_zzip_FNM_PERIOD))
+ {
+ FILE* out = stdout;
+ if (extract) out = create_fopen(name, "wb", 1);
+ if (! out) {
+ if (errno != EISDIR) {
+ DBG3("can not open output file %i %s", errno, strerror(errno));
+ done = EXIT_ERRORS;
+ }
+ continue;
+ }
+ unzzip_mem_disk_cat_file (disk, name, out);
+ if (extract) fclose(out);
+ break; /* match loop */
+ }
}
}
}
+ zzip_mem_disk_close(disk);
return done;
}
Modified: trunk/Build/source/libs/zziplib/zziplib-src/bins/unzzipcat-mix.c
===================================================================
--- trunk/Build/source/libs/zziplib/zziplib-src/bins/unzzipcat-mix.c 2018-03-17 22:23:43 UTC (rev 47003)
+++ trunk/Build/source/libs/zziplib/zziplib-src/bins/unzzipcat-mix.c 2018-03-18 00:25:18 UTC (rev 47004)
@@ -143,7 +143,7 @@
for (argn=1; argn < argc; argn++)
{
if (! _zzip_fnmatch (argv[argn], name,
- FNM_NOESCAPE|FNM_PATHNAME|FNM_PERIOD))
+ _zzip_FNM_NOESCAPE|_zzip_FNM_PATHNAME|_zzip_FNM_PERIOD))
{
FILE* out = stdout;
char* zip_name = argv[1];
Modified: trunk/Build/source/libs/zziplib/zziplib-src/bins/unzzipcat-zip.c
===================================================================
--- trunk/Build/source/libs/zziplib/zziplib-src/bins/unzzipcat-zip.c 2018-03-17 22:23:43 UTC (rev 47003)
+++ trunk/Build/source/libs/zziplib/zziplib-src/bins/unzzipcat-zip.c 2018-03-18 00:25:18 UTC (rev 47004)
@@ -143,7 +143,7 @@
for (argn=1; argn < argc; argn++)
{
if (! _zzip_fnmatch (argv[argn], name,
- FNM_NOESCAPE|FNM_PATHNAME|FNM_PERIOD))
+ _zzip_FNM_NOESCAPE|_zzip_FNM_PATHNAME|_zzip_FNM_PERIOD))
{
FILE* out = stdout;
if (extract) out = create_fopen(name, "wb", 1);
Modified: trunk/Build/source/libs/zziplib/zziplib-src/bins/unzzipdir-big.c
===================================================================
--- trunk/Build/source/libs/zziplib/zziplib-src/bins/unzzipdir-big.c 2018-03-17 22:23:43 UTC (rev 47003)
+++ trunk/Build/source/libs/zziplib/zziplib-src/bins/unzzipdir-big.c 2018-03-18 00:25:18 UTC (rev 47004)
@@ -9,17 +9,12 @@
#include <zzip/fseeko.h>
#include <zzip/fetch.h>
+#include <zzip/__fnmatch.h>
#include <stdlib.h>
#include <string.h>
#include "unzzipdir-zip.h"
#include "unzzip-states.h"
-#ifdef ZZIP_HAVE_FNMATCH_H
-#include <fnmatch.h>
-#else
-#define fnmatch(x,y,z) strcmp(x,y)
-#endif
-
static const char* comprlevel[] = {
"stored", "shrunk", "redu:1", "redu:2", "redu:3", "redu:4",
"impl:N", "toknze", "defl:N", "defl:B", "impl:B" };
Modified: trunk/Build/source/libs/zziplib/zziplib-src/bins/unzzipdir-mem.c
===================================================================
--- trunk/Build/source/libs/zziplib/zziplib-src/bins/unzzipdir-mem.c 2018-03-17 22:23:43 UTC (rev 47003)
+++ trunk/Build/source/libs/zziplib/zziplib-src/bins/unzzipdir-mem.c 2018-03-18 00:25:18 UTC (rev 47004)
@@ -7,6 +7,7 @@
#include <zzip/memdisk.h>
#include <zzip/__debug.h>
+#include <zzip/__fnmatch.h>
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
@@ -20,12 +21,6 @@
#include <io.h>
#endif
-#ifdef ZZIP_HAVE_FNMATCH_H
-#include <fnmatch.h>
-#else
-#define fnmatch(x,y,z) strcmp(x,y)
-#endif
-
static const char* comprlevel[] = {
"stored", "shrunk", "redu:1", "redu:2", "redu:3", "redu:4",
"impl:N", "toknze", "defl:N", "defl:B", "impl:B" };
@@ -73,10 +68,8 @@
printf ("%lli/%lli %s %s\n", csize, usize, defl, name);
}
}
- return 0;
}
-
- if (argc == 3)
+ else if (argc == 3)
{ /* list from one spec */
ZZIP_MEM_ENTRY* entry = 0;
while ((entry = zzip_mem_disk_findmatch(disk, argv[2], entry, 0, 0)))
@@ -94,9 +87,8 @@
printf ("%lli/%lli %s %s\n", csize, usize, defl, name);
}
}
- return 0;
}
-
+ else
{ /* list only the matching entries - in order of zip directory */
ZZIP_MEM_ENTRY* entry = zzip_mem_disk_findfirst(disk);
for (; entry ; entry = zzip_mem_disk_findnext(disk, entry))
@@ -104,8 +96,8 @@
char* name = zzip_mem_entry_to_name (entry);
for (argn=1; argn < argc; argn++)
{
- if (! fnmatch (argv[argn], name,
- FNM_NOESCAPE|FNM_PATHNAME|FNM_PERIOD))
+ if (! _zzip_fnmatch (argv[argn], name,
+ _zzip_FNM_NOESCAPE|_zzip_FNM_PATHNAME|_zzip_FNM_PERIOD))
{
char* name = zzip_mem_entry_to_name (entry);
long long usize = entry->zz_usize;
@@ -123,8 +115,9 @@
}
}
}
- return 0;
}
+ zzip_mem_disk_close(disk);
+ return EXIT_OK;
}
int
Modified: trunk/Build/source/libs/zziplib/zziplib-src/bins/unzzipdir-mix.c
===================================================================
--- trunk/Build/source/libs/zziplib/zziplib-src/bins/unzzipdir-mix.c 2018-03-17 22:23:43 UTC (rev 47003)
+++ trunk/Build/source/libs/zziplib/zziplib-src/bins/unzzipdir-mix.c 2018-03-18 00:25:18 UTC (rev 47004)
@@ -7,6 +7,7 @@
#include <zzip/lib.h>
#include <zzip/__debug.h>
+#include <zzip/__fnmatch.h>
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
@@ -20,12 +21,6 @@
#include <io.h>
#endif
-#ifdef ZZIP_HAVE_FNMATCH_H
-#include <fnmatch.h>
-#else
-#define fnmatch(x,y,z) strcmp(x,y)
-#endif
-
static const char* comprlevel[] = {
"stored", "shrunk", "redu:1", "redu:2", "redu:3", "redu:4",
"impl:N", "toknze", "defl:N", "defl:B", "impl:B" };
@@ -107,8 +102,8 @@
char* name = entry->d_name;
for (argn=1; argn < argc; argn++)
{
- if (! fnmatch (argv[argn], name,
- FNM_NOESCAPE|FNM_PATHNAME|FNM_PERIOD))
+ if (! _zzip_fnmatch (argv[argn], name,
+ _zzip_FNM_NOESCAPE|_zzip_FNM_PATHNAME|_zzip_FNM_PERIOD))
{
long long usize = entry->st_size;
if (!verbose)
Modified: trunk/Build/source/libs/zziplib/zziplib-src/bins/unzzipdir-zip.c
===================================================================
--- trunk/Build/source/libs/zziplib/zziplib-src/bins/unzzipdir-zip.c 2018-03-17 22:23:43 UTC (rev 47003)
+++ trunk/Build/source/libs/zziplib/zziplib-src/bins/unzzipdir-zip.c 2018-03-18 00:25:18 UTC (rev 47004)
@@ -6,6 +6,7 @@
*/
#include <zzip/lib.h>
+#include <zzip/__fnmatch.h>
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
@@ -19,12 +20,6 @@
#include <io.h>
#endif
-#ifdef ZZIP_HAVE_FNMATCH_H
-#include <fnmatch.h>
-#else
-#define fnmatch(x,y,z) strcmp(x,y)
-#endif
-
static const char* comprlevel[] = {
"stored", "shrunk", "redu:1", "redu:2", "redu:3", "redu:4",
"impl:N", "toknze", "defl:N", "defl:B", "impl:B" };
@@ -105,8 +100,8 @@
char* name = entry.d_name;
for (argn=1; argn < argc; argn++)
{
- if (! fnmatch (argv[argn], name,
- FNM_NOESCAPE|FNM_PATHNAME|FNM_PERIOD))
+ if (! _zzip_fnmatch (argv[argn], name,
+ _zzip_FNM_NOESCAPE|_zzip_FNM_PATHNAME|_zzip_FNM_PERIOD))
{
long long usize = entry.st_size;
if (!verbose)
Added: trunk/Build/source/libs/zziplib/zziplib-src/bins/unzzipshow.c
===================================================================
--- trunk/Build/source/libs/zziplib/zziplib-src/bins/unzzipshow.c (rev 0)
+++ trunk/Build/source/libs/zziplib/zziplib-src/bins/unzzipshow.c 2018-03-18 00:25:18 UTC (rev 47004)
@@ -0,0 +1,109 @@
+/*
+ * Copyright (c) 2003 Guido Draheim <guidod at gmx.de>
+ * Use freely under the restrictions of the ZLIB license.
+ *
+ * This file is used as an example to clarify zzipfseeko api usage.
+ */
+
+#include <zzip/fseeko.h>
+#include <zzip/__fnmatch.h>
+#include <stdlib.h>
+#include <string.h>
+
+static const char usage[] =
+{
+ "unzzipshow <zip> [names].. \n"
+ " - unzzip data content of files contained in a zip archive.\n"
+};
+
+static void zzip_entry_fprint(ZZIP_ENTRY* entry, FILE* out)
+{
+ ZZIP_ENTRY_FILE* file = zzip_entry_fopen (entry, 0);
+ if (file)
+ {
+ char buffer[1024]; int len;
+ while ((len = zzip_entry_fread (buffer, 1024, 1, file)))
+ fwrite (buffer, len, 1, out);
+
+ zzip_entry_fclose (file);
+ }
+}
+
+static void zzip_cat_file(FILE* disk, char* name, FILE* out)
+{
+ ZZIP_ENTRY_FILE* file = zzip_entry_ffile (disk, name);
+ if (file)
+ {
+ char buffer[1024]; int len;
+ while ((len = zzip_entry_fread (buffer, 1024, 1, file)))
+ fwrite (buffer, len, 1, out);
+
+ zzip_entry_fclose (file);
+ }
+}
+
+int
+main (int argc, char ** argv)
+{
+ int argn;
+ FILE* disk;
+
+ if (argc <= 1 || ! strcmp (argv[1], "--help"))
+ {
+ printf (usage);
+ return 0;
+ }
+ if (! strcmp (argv[1], "--version"))
+ {
+ printf (__FILE__" version "ZZIP_PACKAGE" "ZZIP_VERSION"\n");
+ return 0;
+ }
+
+ disk = fopen (argv[1], "r");
+ if (! disk) {
+ perror(argv[1]);
+ return -1;
+ }
+
+ if (argc == 2)
+ { /* print directory list */
+ ZZIP_ENTRY* entry = zzip_entry_findfirst(disk);
+ if (! entry) puts("no first entry!\n");
+ for (; entry ; entry = zzip_entry_findnext(entry))
+ {
+ char* name = zzip_entry_strdup_name (entry);
+ printf ("%s\n", name);
+ free (name);
+ }
+ return 0;
+ }
+
+ if (argc == 3)
+ { /* list from one spec */
+ ZZIP_ENTRY* entry = 0;
+ while ((entry = zzip_entry_findmatch(disk, argv[2], entry, 0, 0)))
+ zzip_entry_fprint (entry, stdout);
+
+ return 0;
+ }
+
+ for (argn=1; argn < argc; argn++)
+ { /* list only the matching entries - each in order of commandline */
+ ZZIP_ENTRY* entry = zzip_entry_findfirst(disk);
+ for (; entry ; entry = zzip_entry_findnext(entry))
+ {
+ char* name = zzip_entry_strdup_name (entry);
+ if (! _zzip_fnmatch (argv[argn], name,
+ _zzip_FNM_NOESCAPE|_zzip_FNM_PATHNAME|_zzip_FNM_PERIOD))
+ zzip_cat_file (disk, name, stdout);
+ free (name);
+ }
+ }
+ return 0;
+}
+
+/*
+ * Local variables:
+ * c-file-style: "stroustrup"
+ * End:
+ */
Property changes on: trunk/Build/source/libs/zziplib/zziplib-src/bins/unzzipshow.c
___________________________________________________________________
Added: svn:eol-style
## -0,0 +1 ##
+LF
\ No newline at end of property
Modified: trunk/Build/source/libs/zziplib/zziplib-src/config.h.in
===================================================================
--- trunk/Build/source/libs/zziplib/zziplib-src/config.h.in 2018-03-17 22:23:43 UTC (rev 47003)
+++ trunk/Build/source/libs/zziplib/zziplib-src/config.h.in 2018-03-18 00:25:18 UTC (rev 47004)
@@ -52,6 +52,9 @@
/* Define to 1 if you have the `strndup' function. */
#undef HAVE_STRNDUP
+/* Define to 1 if you have the `strnlen' function. */
+#undef HAVE_STRNLEN
+
/* Define to 1 if you have the <sys/dir.h> header file, and it defines `DIR'.
*/
#undef HAVE_SYS_DIR_H
@@ -94,10 +97,12 @@
*/
#undef LARGEFILE_SENSITIVE
-/* Define to the sub-directory in which libtool stores uninstalled libraries.
- */
+/* Define to the sub-directory where libtool stores uninstalled libraries. */
#undef LT_OBJDIR
+/* Define if debugging is disabled */
+#undef NDEBUG
+
/* Name of package */
#undef PACKAGE
@@ -122,6 +127,9 @@
/* The number of bytes in type int */
#undef SIZEOF_INT
+/* The number of bytes in type int * */
+#undef SIZEOF_INT_P
+
/* The number of bytes in type long */
#undef SIZEOF_LONG
Modified: trunk/Build/source/libs/zziplib/zziplib-src/configure
===================================================================
--- trunk/Build/source/libs/zziplib/zziplib-src/configure 2018-03-17 22:23:43 UTC (rev 47003)
+++ trunk/Build/source/libs/zziplib/zziplib-src/configure 2018-03-18 00:25:18 UTC (rev 47004)
@@ -199,6 +199,14 @@
as_lineno_2=";as_suggested=$as_suggested$LINENO;as_suggested=$as_suggested" as_lineno_2a=\$LINENO
eval 'test \"x\$as_lineno_1'\$as_run'\" != \"x\$as_lineno_2'\$as_run'\" &&
test \"x\`expr \$as_lineno_1'\$as_run' + 1\`\" = \"x\$as_lineno_2'\$as_run'\"' || exit 1
+
+ test -n \"\${ZSH_VERSION+set}\${BASH_VERSION+set}\" || (
+ ECHO='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\'
+ ECHO=\$ECHO\$ECHO\$ECHO\$ECHO\$ECHO
+ ECHO=\$ECHO\$ECHO\$ECHO\$ECHO\$ECHO\$ECHO
+ PATH=/empty FPATH=/empty; export PATH FPATH
+ test \"X\`printf %s \$ECHO\`\" = \"X\$ECHO\" \\
+ || test \"X\`print -r -- \$ECHO\`\" = \"X\$ECHO\" ) || exit 1
test \$(( 1 + 1 )) = 2 || exit 1"
if (eval "$as_required") 2>/dev/null; then :
as_have_required=yes
@@ -556,156 +564,9 @@
# Sed expression to map a string onto a valid variable name.
as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'"
-
-
-# Check that we are running under the correct shell.
SHELL=${CONFIG_SHELL-/bin/sh}
-case X$lt_ECHO in
-X*--fallback-echo)
- # Remove one level of quotation (which was required for Make).
- ECHO=`echo "$lt_ECHO" | sed 's,\\\\\$\\$0,'$0','`
- ;;
-esac
-ECHO=${lt_ECHO-echo}
-if test "X$1" = X--no-reexec; then
- # Discard the --no-reexec flag, and continue.
- shift
-elif test "X$1" = X--fallback-echo; then
- # Avoid inline document here, it may be left over
- :
-elif test "X`{ $ECHO '\t'; } 2>/dev/null`" = 'X\t' ; then
- # Yippee, $ECHO works!
- :
-else
- # Restart under the correct shell.
- exec $SHELL "$0" --no-reexec ${1+"$@"}
-fi
-
-if test "X$1" = X--fallback-echo; then
- # used as fallback echo
- shift
- cat <<_LT_EOF
-$*
-_LT_EOF
- exit 0
-fi
-
-# The HP-UX ksh and POSIX shell print the target directory to stdout
-# if CDPATH is set.
-(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
-
-if test -z "$lt_ECHO"; then
- if test "X${echo_test_string+set}" != Xset; then
- # find a string as large as possible, as long as the shell can cope with it
- for cmd in 'sed 50q "$0"' 'sed 20q "$0"' 'sed 10q "$0"' 'sed 2q "$0"' 'echo test'; do
- # expected sizes: less than 2Kb, 1Kb, 512 bytes, 16 bytes, ...
- if { echo_test_string=`eval $cmd`; } 2>/dev/null &&
- { test "X$echo_test_string" = "X$echo_test_string"; } 2>/dev/null
- then
- break
- fi
- done
- fi
-
- if test "X`{ $ECHO '\t'; } 2>/dev/null`" = 'X\t' &&
- echo_testing_string=`{ $ECHO "$echo_test_string"; } 2>/dev/null` &&
- test "X$echo_testing_string" = "X$echo_test_string"; then
- :
- else
- # The Solaris, AIX, and Digital Unix default echo programs unquote
- # backslashes. This makes it impossible to quote backslashes using
- # echo "$something" | sed 's/\\/\\\\/g'
- #
- # So, first we look for a working echo in the user's PATH.
-
- lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
- for dir in $PATH /usr/ucb; do
- IFS="$lt_save_ifs"
- if (test -f $dir/echo || test -f $dir/echo$ac_exeext) &&
- test "X`($dir/echo '\t') 2>/dev/null`" = 'X\t' &&
- echo_testing_string=`($dir/echo "$echo_test_string") 2>/dev/null` &&
- test "X$echo_testing_string" = "X$echo_test_string"; then
- ECHO="$dir/echo"
- break
- fi
- done
- IFS="$lt_save_ifs"
-
- if test "X$ECHO" = Xecho; then
- # We didn't find a better echo, so look for alternatives.
- if test "X`{ print -r '\t'; } 2>/dev/null`" = 'X\t' &&
- echo_testing_string=`{ print -r "$echo_test_string"; } 2>/dev/null` &&
- test "X$echo_testing_string" = "X$echo_test_string"; then
- # This shell has a builtin print -r that does the trick.
- ECHO='print -r'
- elif { test -f /bin/ksh || test -f /bin/ksh$ac_exeext; } &&
- test "X$CONFIG_SHELL" != X/bin/ksh; then
- # If we have ksh, try running configure again with it.
- ORIGINAL_CONFIG_SHELL=${CONFIG_SHELL-/bin/sh}
- export ORIGINAL_CONFIG_SHELL
- CONFIG_SHELL=/bin/ksh
- export CONFIG_SHELL
- exec $CONFIG_SHELL "$0" --no-reexec ${1+"$@"}
- else
- # Try using printf.
- ECHO='printf %s\n'
- if test "X`{ $ECHO '\t'; } 2>/dev/null`" = 'X\t' &&
- echo_testing_string=`{ $ECHO "$echo_test_string"; } 2>/dev/null` &&
- test "X$echo_testing_string" = "X$echo_test_string"; then
- # Cool, printf works
- :
- elif echo_testing_string=`($ORIGINAL_CONFIG_SHELL "$0" --fallback-echo '\t') 2>/dev/null` &&
- test "X$echo_testing_string" = 'X\t' &&
- echo_testing_string=`($ORIGINAL_CONFIG_SHELL "$0" --fallback-echo "$echo_test_string") 2>/dev/null` &&
- test "X$echo_testing_string" = "X$echo_test_string"; then
- CONFIG_SHELL=$ORIGINAL_CONFIG_SHELL
- export CONFIG_SHELL
- SHELL="$CONFIG_SHELL"
- export SHELL
- ECHO="$CONFIG_SHELL $0 --fallback-echo"
- elif echo_testing_string=`($CONFIG_SHELL "$0" --fallback-echo '\t') 2>/dev/null` &&
- test "X$echo_testing_string" = 'X\t' &&
- echo_testing_string=`($CONFIG_SHELL "$0" --fallback-echo "$echo_test_string") 2>/dev/null` &&
- test "X$echo_testing_string" = "X$echo_test_string"; then
- ECHO="$CONFIG_SHELL $0 --fallback-echo"
- else
- # maybe with a smaller string...
- prev=:
-
- for cmd in 'echo test' 'sed 2q "$0"' 'sed 10q "$0"' 'sed 20q "$0"' 'sed 50q "$0"'; do
- if { test "X$echo_test_string" = "X`eval $cmd`"; } 2>/dev/null
- then
- break
- fi
- prev="$cmd"
- done
-
- if test "$prev" != 'sed 50q "$0"'; then
- echo_test_string=`eval $prev`
- export echo_test_string
- exec ${ORIGINAL_CONFIG_SHELL-${CONFIG_SHELL-/bin/sh}} "$0" ${1+"$@"}
- else
- # Oops. We lost completely, so just stick with echo.
- ECHO=echo
- fi
- fi
- fi
- fi
- fi
-fi
-
-# Copy echo and quote the copy suitably for passing to libtool from
-# the Makefile, instead of quoting the original, which is used later.
-lt_ECHO=$ECHO
-if test "X$lt_ECHO" = "X$CONFIG_SHELL $0 --fallback-echo"; then
- lt_ECHO="$CONFIG_SHELL \\\$\$0 --fallback-echo"
-fi
-
-
-
-
test -n "$DJDIR" || exec 7<&0 </dev/null
exec 6>&1
@@ -782,6 +643,8 @@
RESOLVES
ZZIPLIB_LDFLAGS
ZIPTESTS
+ASAN_CFLAGS
+ASAN_LIBS
SDL_GENERATE
SDL
ZLIB_VERSION
@@ -804,13 +667,15 @@
VERSION_INFO
RELEASE_INFO
CPP
+LT_SYS_LIBRARY_PATH
OTOOL64
OTOOL
LIPO
NMEDIT
DSYMUTIL
-lt_ECHO
+MANIFEST_TOOL
RANLIB
+ac_ct_AR
AR
LN_S
NM
@@ -930,12 +795,15 @@
enable_thread_safe
with_zlib
enable_silent_rules
+enable_debug
enable_dependency_tracking
enable_shared
enable_static
with_pic
enable_fast_install
+with_aix_soname
with_gnu_ld
+with_sysroot
enable_libtool_lock
enable_maintainer_mode
enable_largefile
@@ -945,6 +813,7 @@
with_lowstk
enable_mmap
enable_sdl
+with_asan
with_defines
enable_frame_pointer
enable_enable_default_pkgconfigdir
@@ -958,6 +827,7 @@
LDFLAGS
LIBS
CPPFLAGS
+LT_SYS_LIBRARY_PATH
CPP'
@@ -1582,6 +1452,8 @@
--enable-silent-rules less verbose build output (undo: "make V=1")
--disable-silent-rules verbose build output (undo: "make V=0")
+ --enable-debug=[yes/info/profile/no]
+ compile with debugging
--enable-dependency-tracking
do not reject slow dependency extractors
--disable-dependency-tracking
@@ -1608,9 +1480,14 @@
--without-PACKAGE do not use PACKAGE (same as --with-PACKAGE=no)
--with-zlib zlib prefix (e.g. '$HOME/software')
- --with-pic try to use only PIC/non-PIC objects [default=use
+ --with-pic[=PKGS] try to use only PIC/non-PIC objects [default=use
both]
+ --with-aix-soname=aix|svr4|both
+ shared library versioning (aka "SONAME") variant to
+ provide on AIX, [default=aix].
--with-gnu-ld assume the C compiler uses GNU ld [default=no]
+ --with-sysroot[=DIR] Search for dependent libraries within DIR (or the
+ compiler's sysroot if not specified).
--with-largefile compile as off64_t instead of 32bit off_t
--with-docdir docdir prefix (prefix/share/doc)
@@ -1619,6 +1496,8 @@
--with-lowstk limited thread stack
+ --with-asan compile with adress sanitizer
+
--with-defines easy,harden,allow_modulo_entries
Some influential environment variables:
@@ -1629,6 +1508,8 @@
LIBS libraries to pass to the linker, e.g. -l<library>
CPPFLAGS (Objective) C/C++ preprocessor flags, e.g. -I<include dir> if
you have headers in a nonstandard directory <include dir>
+ LT_SYS_LIBRARY_PATH
+ User-defined run-time library search path.
CPP C preprocessor
Use these variables to override the choices made by `configure' or to help
@@ -3175,7 +3056,7 @@
$as_echo "$PACKAGE_ICON $k" >&6; }
-am__api_version='1.13'
+am__api_version='1.15'
# Find a good install program. We prefer a C program (faster),
# so one script is as good as another. But avoid the broken or
@@ -3367,7 +3248,7 @@
$as_echo "$as_me: WARNING: 'missing' script is too old or missing" >&2;}
fi
-if test x"${install_sh}" != xset; then
+if test x"${install_sh+set}" != xset; then
case $am_aux_dir in
*\ * | *\ *)
install_sh="\${SHELL} '$am_aux_dir/install-sh'" ;;
@@ -3696,8 +3577,8 @@
# <http://lists.gnu.org/archive/html/automake/2012-07/msg00014.html>
mkdir_p='$(MKDIR_P)'
-# We need awk for the "check" target. The system "awk" is bad on
-# some platforms.
+# We need awk for the "check" target (and possibly the TAP driver). The
+# system "awk" is bad on some platforms.
# Always define AMTAR for backward compatibility. Yes, it's still used
# in the wild :-( We should find a proper way to deprecate it ...
AMTAR='$${TAR-tar}'
@@ -3713,6 +3594,141 @@
+# POSIX will say in a future version that running "rm -f" with no argument
+# is OK; and we want to be able to make that assumption in our Makefile
+# recipes. So use an aggressive probe to check that the usage we want is
+# actually supported "in the wild" to an acceptable degree.
+# See automake bug#10828.
+# To make any issue more visible, cause the running configure to be aborted
+# by default if the 'rm' program in use doesn't match our expectations; the
+# user can still override this though.
+if rm -f && rm -fr && rm -rf; then : OK; else
+ cat >&2 <<'END'
+Oops!
+
+Your 'rm' program seems unable to run without file operands specified
+on the command line, even when the '-f' option is present. This is contrary
+to the behaviour of most rm programs out there, and not conforming with
+the upcoming POSIX standard: <http://austingroupbugs.net/view.php?id=542>
+
+Please tell bug-automake at gnu.org about your system, including the value
+of your $PATH and any error possibly output before this message. This
+can help us improve future automake versions.
+
+END
+ if test x"$ACCEPT_INFERIOR_RM_PROGRAM" = x"yes"; then
+ echo 'Configuration will proceed anyway, since you have set the' >&2
+ echo 'ACCEPT_INFERIOR_RM_PROGRAM variable to "yes"' >&2
+ echo >&2
+ else
+ cat >&2 <<'END'
+Aborting the configuration process, to ensure you take notice of the issue.
+
+You can download and install GNU coreutils to get an 'rm' implementation
+that behaves properly: <http://www.gnu.org/software/coreutils/>.
+
+If you want to complete the configuration process using your problematic
+'rm' anyway, export the environment variable ACCEPT_INFERIOR_RM_PROGRAM
+to "yes", and re-run configure.
+
+END
+ as_fn_error $? "Your 'rm' program is bad, sorry." "$LINENO" 5
+ fi
+fi
+
+
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to enable debugging" >&5
+$as_echo_n "checking whether to enable debugging... " >&6; }
+
+ ax_enable_debug_default=no
+ ax_enable_debug_is_release=$ax_is_release
+
+ # If this is a release, override the default.
+ if test "$ax_enable_debug_is_release" = "yes"; then :
+ ax_enable_debug_default="no"
+fi
+
+
+
+
+ # Check whether --enable-debug was given.
+if test "${enable_debug+set}" = set; then :
+ enableval=$enable_debug;
+else
+ enable_debug=$ax_enable_debug_default
+fi
+
+
+ # empty mean debug yes
+ if test "x$enable_debug" = "x"; then :
+ enable_debug="yes"
+fi
+
+ # case of debug
+ case $enable_debug in #(
+ yes) :
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+$as_echo "yes" >&6; }
+ CFLAGS="${CFLAGS} -g -O0"
+ CXXFLAGS="${CXXFLAGS} -g -O0"
+ FFLAGS="${FFLAGS} -g -O0"
+ FCFLAGS="${FCFLAGS} -g -O0"
+ OBJCFLAGS="${OBJCFLAGS} -g -O0"
+ ;; #(
+ info) :
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: info" >&5
+$as_echo "info" >&6; }
+ CFLAGS="${CFLAGS} -g"
+ CXXFLAGS="${CXXFLAGS} -g"
+ FFLAGS="${FFLAGS} -g"
+ FCFLAGS="${FCFLAGS} -g"
+ OBJCFLAGS="${OBJCFLAGS} -g"
+ ;; #(
+ profile) :
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: profile" >&5
+$as_echo "profile" >&6; }
+ CFLAGS="${CFLAGS} -g -pg"
+ CXXFLAGS="${CXXFLAGS} -g -pg"
+ FFLAGS="${FFLAGS} -g -pg"
+ FCFLAGS="${FCFLAGS} -g -pg"
+ OBJCFLAGS="${OBJCFLAGS} -g -pg"
+ LDFLAGS="${LDFLAGS} -pg"
+ ;; #(
+ *) :
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+ if test "x${CFLAGS+set}" != "xset"; then :
+ CFLAGS=""
+fi
+ if test "x${CXXFLAGS+set}" != "xset"; then :
+ CXXFLAGS=""
+fi
+ if test "x${FFLAGS+set}" != "xset"; then :
+ FFLAGS=""
+fi
+ if test "x${FCFLAGS+set}" != "xset"; then :
+ FCFLAGS=""
+fi
+ if test "x${OBJCFLAGS+set}" != "xset"; then :
+ OBJCFLAGS=""
+fi
+ ;;
+esac
+
+ if test "x$enable_debug" = "xyes"; then :
+
+else
+
+$as_echo "#define NDEBUG /**/" >>confdefs.h
+
+fi
+ ax_enable_debug=$enable_debug
+
ac_ext=c
ac_cpp='$CPP $CPPFLAGS'
ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
@@ -4501,6 +4517,65 @@
ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $CC understands -c and -o together" >&5
+$as_echo_n "checking whether $CC understands -c and -o together... " >&6; }
+if ${am_cv_prog_cc_c_o+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+int
+main ()
+{
+
+ ;
+ return 0;
+}
+_ACEOF
+ # Make sure it works both with $CC and with simple cc.
+ # Following AC_PROG_CC_C_O, we do the test twice because some
+ # compilers refuse to overwrite an existing .o file with -o,
+ # though they will create one.
+ am_cv_prog_cc_c_o=yes
+ for am_i in 1 2; do
+ if { echo "$as_me:$LINENO: $CC -c conftest.$ac_ext -o conftest2.$ac_objext" >&5
+ ($CC -c conftest.$ac_ext -o conftest2.$ac_objext) >&5 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } \
+ && test -f conftest2.$ac_objext; then
+ : OK
+ else
+ am_cv_prog_cc_c_o=no
+ break
+ fi
+ done
+ rm -f core conftest*
+ unset am_i
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_prog_cc_c_o" >&5
+$as_echo "$am_cv_prog_cc_c_o" >&6; }
+if test "$am_cv_prog_cc_c_o" != yes; then
+ # Losing compiler, so override with the script.
+ # FIXME: It is wrong to rewrite CC.
+ # But if we don't then we get into trouble of one sort or another.
+ # A longer-term fix would be to have automake use am__CC in this case,
+ # and then we could set am__CC="\$(top_srcdir)/compile \$(CC)"
+ CC="$am_aux_dir/compile $CC"
+fi
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
DEPDIR="${am__leading_dot}deps"
ac_config_commands="$ac_config_commands depfiles"
@@ -4697,7 +4772,7 @@
enable_win32_dll=yes
case $host in
-*-*-cygwin* | *-*-mingw* | *-*-pw32* | *-cegcc*)
+*-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-cegcc*)
if test -n "$ac_tool_prefix"; then
# Extract the first word of "${ac_tool_prefix}as", so it can be a program name with args.
set dummy ${ac_tool_prefix}as; ac_word=$2
@@ -5005,8 +5080,8 @@
-macro_version='2.2.6'
-macro_revision='1.3012'
+macro_version='2.4.6'
+macro_revision='2.4.6'
@@ -5020,8 +5095,77 @@
-ltmain="$ac_aux_dir/ltmain.sh"
+ltmain=$ac_aux_dir/ltmain.sh
+# Backslashify metacharacters that are still active within
+# double-quoted strings.
+sed_quote_subst='s/\(["`$\\]\)/\\\1/g'
+
+# Same as above, but do not quote variable references.
+double_quote_subst='s/\(["`\\]\)/\\\1/g'
+
+# Sed substitution to delay expansion of an escaped shell variable in a
+# double_quote_subst'ed string.
+delay_variable_subst='s/\\\\\\\\\\\$/\\\\\\$/g'
+
+# Sed substitution to delay expansion of an escaped single quote.
+delay_single_quote_subst='s/'\''/'\'\\\\\\\'\''/g'
+
+# Sed substitution to avoid accidental globbing in evaled expressions
+no_glob_subst='s/\*/\\\*/g'
+
+ECHO='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\'
+ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO
+ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO$ECHO
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to print strings" >&5
+$as_echo_n "checking how to print strings... " >&6; }
+# Test print first, because it will be a builtin if present.
+if test "X`( print -r -- -n ) 2>/dev/null`" = X-n && \
+ test "X`print -r -- $ECHO 2>/dev/null`" = "X$ECHO"; then
+ ECHO='print -r --'
+elif test "X`printf %s $ECHO 2>/dev/null`" = "X$ECHO"; then
+ ECHO='printf %s\n'
+else
+ # Use this function as a fallback that always works.
+ func_fallback_echo ()
+ {
+ eval 'cat <<_LTECHO_EOF
+$1
+_LTECHO_EOF'
+ }
+ ECHO='func_fallback_echo'
+fi
+
+# func_echo_all arg...
+# Invoke $ECHO with all args, space-separated.
+func_echo_all ()
+{
+ $ECHO ""
+}
+
+case $ECHO in
+ printf*) { $as_echo "$as_me:${as_lineno-$LINENO}: result: printf" >&5
+$as_echo "printf" >&6; } ;;
+ print*) { $as_echo "$as_me:${as_lineno-$LINENO}: result: print -r" >&5
+$as_echo "print -r" >&6; } ;;
+ *) { $as_echo "$as_me:${as_lineno-$LINENO}: result: cat" >&5
+$as_echo "cat" >&6; } ;;
+esac
+
+
+
+
+
+
+
+
+
+
+
+
+
+
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for a sed that does not truncate output" >&5
$as_echo_n "checking for a sed that does not truncate output... " >&6; }
if ${ac_cv_path_SED+:} false; then :
@@ -5323,19 +5467,19 @@
# Check whether --with-gnu-ld was given.
if test "${with_gnu_ld+set}" = set; then :
- withval=$with_gnu_ld; test "$withval" = no || with_gnu_ld=yes
+ withval=$with_gnu_ld; test no = "$withval" || with_gnu_ld=yes
else
with_gnu_ld=no
fi
ac_prog=ld
-if test "$GCC" = yes; then
+if test yes = "$GCC"; then
# Check if gcc -print-prog-name=ld gives a path.
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for ld used by $CC" >&5
$as_echo_n "checking for ld used by $CC... " >&6; }
case $host in
*-*-mingw*)
- # gcc leaves a trailing carriage return which upsets mingw
+ # gcc leaves a trailing carriage return, which upsets mingw
ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;;
*)
ac_prog=`($CC -print-prog-name=ld) 2>&5` ;;
@@ -5349,7 +5493,7 @@
while $ECHO "$ac_prog" | $GREP "$re_direlt" > /dev/null 2>&1; do
ac_prog=`$ECHO $ac_prog| $SED "s%$re_direlt%/%"`
done
- test -z "$LD" && LD="$ac_prog"
+ test -z "$LD" && LD=$ac_prog
;;
"")
# If it fails, then pretend we aren't using GCC.
@@ -5360,7 +5504,7 @@
with_gnu_ld=unknown
;;
esac
-elif test "$with_gnu_ld" = yes; then
+elif test yes = "$with_gnu_ld"; then
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for GNU ld" >&5
$as_echo_n "checking for GNU ld... " >&6; }
else
@@ -5371,32 +5515,32 @@
$as_echo_n "(cached) " >&6
else
if test -z "$LD"; then
- lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
+ lt_save_ifs=$IFS; IFS=$PATH_SEPARATOR
for ac_dir in $PATH; do
- IFS="$lt_save_ifs"
+ IFS=$lt_save_ifs
test -z "$ac_dir" && ac_dir=.
if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
- lt_cv_path_LD="$ac_dir/$ac_prog"
+ lt_cv_path_LD=$ac_dir/$ac_prog
# Check to see if the program is GNU ld. I'd rather use --version,
# but apparently some variants of GNU ld only accept -v.
# Break only if it was the GNU/non-GNU ld that we prefer.
case `"$lt_cv_path_LD" -v 2>&1 </dev/null` in
*GNU* | *'with BFD'*)
- test "$with_gnu_ld" != no && break
+ test no != "$with_gnu_ld" && break
;;
*)
- test "$with_gnu_ld" != yes && break
+ test yes != "$with_gnu_ld" && break
;;
esac
fi
done
- IFS="$lt_save_ifs"
+ IFS=$lt_save_ifs
else
- lt_cv_path_LD="$LD" # Let the user override the test with a path.
+ lt_cv_path_LD=$LD # Let the user override the test with a path.
fi
fi
-LD="$lt_cv_path_LD"
+LD=$lt_cv_path_LD
if test -n "$LD"; then
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $LD" >&5
$as_echo "$LD" >&6; }
@@ -5439,33 +5583,38 @@
else
if test -n "$NM"; then
# Let the user override the test.
- lt_cv_path_NM="$NM"
+ lt_cv_path_NM=$NM
else
- lt_nm_to_check="${ac_tool_prefix}nm"
+ lt_nm_to_check=${ac_tool_prefix}nm
if test -n "$ac_tool_prefix" && test "$build" = "$host"; then
lt_nm_to_check="$lt_nm_to_check nm"
fi
for lt_tmp_nm in $lt_nm_to_check; do
- lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
+ lt_save_ifs=$IFS; IFS=$PATH_SEPARATOR
for ac_dir in $PATH /usr/ccs/bin/elf /usr/ccs/bin /usr/ucb /bin; do
- IFS="$lt_save_ifs"
+ IFS=$lt_save_ifs
test -z "$ac_dir" && ac_dir=.
- tmp_nm="$ac_dir/$lt_tmp_nm"
- if test -f "$tmp_nm" || test -f "$tmp_nm$ac_exeext" ; then
+ tmp_nm=$ac_dir/$lt_tmp_nm
+ if test -f "$tmp_nm" || test -f "$tmp_nm$ac_exeext"; then
# Check to see if the nm accepts a BSD-compat flag.
- # Adding the `sed 1q' prevents false positives on HP-UX, which says:
+ # Adding the 'sed 1q' prevents false positives on HP-UX, which says:
# nm: unknown option "B" ignored
# Tru64's nm complains that /dev/null is an invalid object file
- case `"$tmp_nm" -B /dev/null 2>&1 | sed '1q'` in
- */dev/null* | *'Invalid file or object type'*)
+ # MSYS converts /dev/null to NUL, MinGW nm treats NUL as empty
+ case $build_os in
+ mingw*) lt_bad_file=conftest.nm/nofile ;;
+ *) lt_bad_file=/dev/null ;;
+ esac
+ case `"$tmp_nm" -B $lt_bad_file 2>&1 | sed '1q'` in
+ *$lt_bad_file* | *'Invalid file or object type'*)
lt_cv_path_NM="$tmp_nm -B"
- break
+ break 2
;;
*)
case `"$tmp_nm" -p /dev/null 2>&1 | sed '1q'` in
*/dev/null*)
lt_cv_path_NM="$tmp_nm -p"
- break
+ break 2
;;
*)
lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but
@@ -5476,7 +5625,7 @@
esac
fi
done
- IFS="$lt_save_ifs"
+ IFS=$lt_save_ifs
done
: ${lt_cv_path_NM=no}
fi
@@ -5483,12 +5632,15 @@
fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_path_NM" >&5
$as_echo "$lt_cv_path_NM" >&6; }
-if test "$lt_cv_path_NM" != "no"; then
- NM="$lt_cv_path_NM"
+if test no != "$lt_cv_path_NM"; then
+ NM=$lt_cv_path_NM
else
# Didn't find any BSD compatible name lister, look for dumpbin.
- if test -n "$ac_tool_prefix"; then
- for ac_prog in "dumpbin -symbols" "link -dump -symbols"
+ if test -n "$DUMPBIN"; then :
+ # Let the user override the test.
+ else
+ if test -n "$ac_tool_prefix"; then
+ for ac_prog in dumpbin "link -dump"
do
# Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args.
set dummy $ac_tool_prefix$ac_prog; ac_word=$2
@@ -5532,7 +5684,7 @@
fi
if test -z "$DUMPBIN"; then
ac_ct_DUMPBIN=$DUMPBIN
- for ac_prog in "dumpbin -symbols" "link -dump -symbols"
+ for ac_prog in dumpbin "link -dump"
do
# Extract the first word of "$ac_prog", so it can be a program name with args.
set dummy $ac_prog; ac_word=$2
@@ -5587,9 +5739,18 @@
fi
fi
+ case `$DUMPBIN -symbols -headers /dev/null 2>&1 | sed '1q'` in
+ *COFF*)
+ DUMPBIN="$DUMPBIN -symbols -headers"
+ ;;
+ *)
+ DUMPBIN=:
+ ;;
+ esac
+ fi
- if test "$DUMPBIN" != ":"; then
- NM="$DUMPBIN"
+ if test : != "$DUMPBIN"; then
+ NM=$DUMPBIN
fi
fi
test -z "$NM" && NM=nm
@@ -5606,13 +5767,13 @@
else
lt_cv_nm_interface="BSD nm"
echo "int some_variable = 0;" > conftest.$ac_ext
- (eval echo "\"\$as_me:5609: $ac_compile\"" >&5)
+ (eval echo "\"\$as_me:$LINENO: $ac_compile\"" >&5)
(eval "$ac_compile" 2>conftest.err)
cat conftest.err >&5
- (eval echo "\"\$as_me:5612: $NM \\\"conftest.$ac_objext\\\"\"" >&5)
+ (eval echo "\"\$as_me:$LINENO: $NM \\\"conftest.$ac_objext\\\"\"" >&5)
(eval "$NM \"conftest.$ac_objext\"" 2>conftest.err > conftest.out)
cat conftest.err >&5
- (eval echo "\"\$as_me:5615: output\"" >&5)
+ (eval echo "\"\$as_me:$LINENO: output\"" >&5)
cat conftest.out >&5
if $GREP 'External.*some_variable' conftest.out > /dev/null; then
lt_cv_nm_interface="MS dumpbin"
@@ -5640,7 +5801,7 @@
$as_echo_n "(cached) " >&6
else
i=0
- teststring="ABCD"
+ teststring=ABCD
case $build_os in
msdosdjgpp*)
@@ -5669,6 +5830,11 @@
lt_cv_sys_max_cmd_len=8192;
;;
+ mint*)
+ # On MiNT this can take a long time and run out of memory.
+ lt_cv_sys_max_cmd_len=8192;
+ ;;
+
amigaos*)
# On AmigaOS with pdksh, this test takes hours, literally.
# So we just punt and use a minimum line length of 8192.
@@ -5675,7 +5841,7 @@
lt_cv_sys_max_cmd_len=8192;
;;
- netbsd* | freebsd* | openbsd* | darwin* | dragonfly*)
+ bitrig* | darwin* | dragonfly* | freebsd* | netbsd* | openbsd*)
# This has been around since 386BSD, at least. Likely further.
if test -x /sbin/sysctl; then
lt_cv_sys_max_cmd_len=`/sbin/sysctl -n kern.argmax`
@@ -5694,6 +5860,11 @@
lt_cv_sys_max_cmd_len=196608
;;
+ os2*)
+ # The test takes a long time on OS/2.
+ lt_cv_sys_max_cmd_len=8192
+ ;;
+
osf*)
# Dr. Hans Ekkehard Plesser reports seeing a kernel panic running configure
# due to this test when exec_disable_arg_limit is 1 on Tru64. It is not
@@ -5720,13 +5891,14 @@
;;
*)
lt_cv_sys_max_cmd_len=`(getconf ARG_MAX) 2> /dev/null`
- if test -n "$lt_cv_sys_max_cmd_len"; then
+ if test -n "$lt_cv_sys_max_cmd_len" && \
+ test undefined != "$lt_cv_sys_max_cmd_len"; then
lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4`
lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3`
else
# Make teststring a little bigger before we do anything with it.
# a 1K string should be a reasonable start.
- for i in 1 2 3 4 5 6 7 8 ; do
+ for i in 1 2 3 4 5 6 7 8; do
teststring=$teststring$teststring
done
SHELL=${SHELL-${CONFIG_SHELL-/bin/sh}}
@@ -5733,9 +5905,9 @@
# If test is not a shell built-in, we'll probably end up computing a
# maximum length that is only half of the actual maximum length, but
# we can't tell.
- while { test "X"`$SHELL $0 --fallback-echo "X$teststring$teststring" 2>/dev/null` \
- = "XX$teststring$teststring"; } >/dev/null 2>&1 &&
- test $i != 17 # 1/2 MB should be enough
+ while { test X`env echo "$teststring$teststring" 2>/dev/null` \
+ = "X$teststring$teststring"; } >/dev/null 2>&1 &&
+ test 17 != "$i" # 1/2 MB should be enough
do
i=`expr $i + 1`
teststring=$teststring$teststring
@@ -5753,7 +5925,7 @@
fi
-if test -n $lt_cv_sys_max_cmd_len ; then
+if test -n "$lt_cv_sys_max_cmd_len"; then
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_sys_max_cmd_len" >&5
$as_echo "$lt_cv_sys_max_cmd_len" >&6; }
else
@@ -5771,30 +5943,6 @@
: ${MV="mv -f"}
: ${RM="rm -f"}
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the shell understands some XSI constructs" >&5
-$as_echo_n "checking whether the shell understands some XSI constructs... " >&6; }
-# Try some XSI features
-xsi_shell=no
-( _lt_dummy="a/b/c"
- test "${_lt_dummy##*/},${_lt_dummy%/*},"${_lt_dummy%"$_lt_dummy"}, \
- = c,a/b,, \
- && eval 'test $(( 1 + 1 )) -eq 2 \
- && test "${#_lt_dummy}" -eq 5' ) >/dev/null 2>&1 \
- && xsi_shell=yes
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $xsi_shell" >&5
-$as_echo "$xsi_shell" >&6; }
-
-
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the shell understands \"+=\"" >&5
-$as_echo_n "checking whether the shell understands \"+=\"... " >&6; }
-lt_shell_append=no
-( foo=bar; set foo baz; eval "$1+=\$2" && test "$foo" = barbaz ) \
- >/dev/null 2>&1 \
- && lt_shell_append=yes
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_shell_append" >&5
-$as_echo "$lt_shell_append" >&6; }
-
-
if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then
lt_unset=unset
else
@@ -5826,6 +5974,80 @@
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to convert $build file names to $host format" >&5
+$as_echo_n "checking how to convert $build file names to $host format... " >&6; }
+if ${lt_cv_to_host_file_cmd+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ case $host in
+ *-*-mingw* )
+ case $build in
+ *-*-mingw* ) # actually msys
+ lt_cv_to_host_file_cmd=func_convert_file_msys_to_w32
+ ;;
+ *-*-cygwin* )
+ lt_cv_to_host_file_cmd=func_convert_file_cygwin_to_w32
+ ;;
+ * ) # otherwise, assume *nix
+ lt_cv_to_host_file_cmd=func_convert_file_nix_to_w32
+ ;;
+ esac
+ ;;
+ *-*-cygwin* )
+ case $build in
+ *-*-mingw* ) # actually msys
+ lt_cv_to_host_file_cmd=func_convert_file_msys_to_cygwin
+ ;;
+ *-*-cygwin* )
+ lt_cv_to_host_file_cmd=func_convert_file_noop
+ ;;
+ * ) # otherwise, assume *nix
+ lt_cv_to_host_file_cmd=func_convert_file_nix_to_cygwin
+ ;;
+ esac
+ ;;
+ * ) # unhandled hosts (and "normal" native builds)
+ lt_cv_to_host_file_cmd=func_convert_file_noop
+ ;;
+esac
+
+fi
+
+to_host_file_cmd=$lt_cv_to_host_file_cmd
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_to_host_file_cmd" >&5
+$as_echo "$lt_cv_to_host_file_cmd" >&6; }
+
+
+
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to convert $build file names to toolchain format" >&5
+$as_echo_n "checking how to convert $build file names to toolchain format... " >&6; }
+if ${lt_cv_to_tool_file_cmd+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ #assume ordinary cross tools, or native build.
+lt_cv_to_tool_file_cmd=func_convert_file_noop
+case $host in
+ *-*-mingw* )
+ case $build in
+ *-*-mingw* ) # actually msys
+ lt_cv_to_tool_file_cmd=func_convert_file_msys_to_w32
+ ;;
+ esac
+ ;;
+esac
+
+fi
+
+to_tool_file_cmd=$lt_cv_to_tool_file_cmd
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_to_tool_file_cmd" >&5
+$as_echo "$lt_cv_to_tool_file_cmd" >&6; }
+
+
+
+
+
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $LD option to reload object files" >&5
$as_echo_n "checking for $LD option to reload object files... " >&6; }
if ${lt_cv_ld_reload_flag+:} false; then :
@@ -5842,9 +6064,14 @@
esac
reload_cmds='$LD$reload_flag -o $output$reload_objs'
case $host_os in
+ cygwin* | mingw* | pw32* | cegcc*)
+ if test yes != "$GCC"; then
+ reload_cmds=false
+ fi
+ ;;
darwin*)
- if test "$GCC" = yes; then
- reload_cmds='$LTCC $LTCFLAGS -nostdlib ${wl}-r -o $output$reload_objs'
+ if test yes = "$GCC"; then
+ reload_cmds='$LTCC $LTCFLAGS -nostdlib $wl-r -o $output$reload_objs'
else
reload_cmds='$LD$reload_flag -o $output$reload_objs'
fi
@@ -5969,13 +6196,13 @@
# Need to set the preceding variable on all platforms that support
# interlibrary dependencies.
# 'none' -- dependencies not supported.
-# `unknown' -- same as none, but documents that we really don't know.
+# 'unknown' -- same as none, but documents that we really don't know.
# 'pass_all' -- all dependencies passed with no checks.
# 'test_compile' -- check by making test program.
# 'file_magic [[regex]]' -- check by looking for files in library path
-# which responds to the $file_magic_cmd with a given extended regex.
-# If you have `file' or equivalent on your system and you're not sure
-# whether `pass_all' will *always* work, you probably want this one.
+# that responds to the $file_magic_cmd with a given extended regex.
+# If you have 'file' or equivalent on your system and you're not sure
+# whether 'pass_all' will *always* work, you probably want this one.
case $host_os in
aix[4-9]*)
@@ -6006,12 +6233,13 @@
lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL'
lt_cv_file_magic_cmd='func_win32_libid'
else
- lt_cv_deplibs_check_method='file_magic file format pei*-i386(.*architecture: i386)?'
+ # Keep this pattern in sync with the one in func_win32_libid.
+ lt_cv_deplibs_check_method='file_magic file format (pei*-i386(.*architecture: i386)?|pe-arm-wince|pe-x86-64)'
lt_cv_file_magic_cmd='$OBJDUMP -f'
fi
;;
-cegcc)
+cegcc*)
# use the weaker test based on 'objdump'. See mingw*.
lt_cv_deplibs_check_method='file_magic file format pe-arm-.*little(.*architecture: arm)?'
lt_cv_file_magic_cmd='$OBJDUMP -f'
@@ -6037,7 +6265,7 @@
fi
;;
-gnu*)
+haiku*)
lt_cv_deplibs_check_method=pass_all
;;
@@ -6049,11 +6277,11 @@
lt_cv_file_magic_test_file=/usr/lib/hpux32/libc.so
;;
hppa*64*)
- lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF-[0-9][0-9]) shared object file - PA-RISC [0-9].[0-9]'
+ lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF[ -][0-9][0-9])(-bit)?( [LM]SB)? shared object( file)?[, -]* PA-RISC [0-9]\.[0-9]'
lt_cv_file_magic_test_file=/usr/lib/pa20_64/libc.sl
;;
*)
- lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|PA-RISC[0-9].[0-9]) shared library'
+ lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|PA-RISC[0-9]\.[0-9]) shared library'
lt_cv_file_magic_test_file=/usr/lib/libc.sl
;;
esac
@@ -6074,8 +6302,8 @@
lt_cv_deplibs_check_method=pass_all
;;
-# This must be Linux ELF.
-linux* | k*bsd*-gnu)
+# This must be glibc/ELF.
+linux* | k*bsd*-gnu | kopensolaris*-gnu | gnu*)
lt_cv_deplibs_check_method=pass_all
;;
@@ -6097,8 +6325,8 @@
lt_cv_deplibs_check_method=pass_all
;;
-openbsd*)
- if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
+openbsd* | bitrig*)
+ if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`"; then
lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so\.[0-9]+\.[0-9]+|\.so|_pic\.a)$'
else
lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so\.[0-9]+\.[0-9]+|_pic\.a)$'
@@ -6151,11 +6379,29 @@
tpf*)
lt_cv_deplibs_check_method=pass_all
;;
+os2*)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
esac
fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_deplibs_check_method" >&5
$as_echo "$lt_cv_deplibs_check_method" >&6; }
+
+file_magic_glob=
+want_nocaseglob=no
+if test "$build" = "$host"; then
+ case $host_os in
+ mingw* | pw32*)
+ if ( shopt | grep nocaseglob ) >/dev/null 2>&1; then
+ want_nocaseglob=yes
+ else
+ file_magic_glob=`echo aAbBcCdDeEfFgGhHiIjJkKlLmMnNoOpPqQrRsStTuUvVwWxXyYzZ | $SED -e "s/\(..\)/s\/[\1]\/[\1]\/g;/g"`
+ fi
+ ;;
+ esac
+fi
+
file_magic_cmd=$lt_cv_file_magic_cmd
deplibs_check_method=$lt_cv_deplibs_check_method
test -z "$deplibs_check_method" && deplibs_check_method=unknown
@@ -6171,11 +6417,162 @@
+
+
+
+
+
+
+
+
+
+
if test -n "$ac_tool_prefix"; then
- # Extract the first word of "${ac_tool_prefix}ar", so it can be a program name with args.
-set dummy ${ac_tool_prefix}ar; ac_word=$2
+ # Extract the first word of "${ac_tool_prefix}dlltool", so it can be a program name with args.
+set dummy ${ac_tool_prefix}dlltool; ac_word=$2
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_DLLTOOL+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$DLLTOOL"; then
+ ac_cv_prog_DLLTOOL="$DLLTOOL" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_DLLTOOL="${ac_tool_prefix}dlltool"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+DLLTOOL=$ac_cv_prog_DLLTOOL
+if test -n "$DLLTOOL"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $DLLTOOL" >&5
+$as_echo "$DLLTOOL" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_DLLTOOL"; then
+ ac_ct_DLLTOOL=$DLLTOOL
+ # Extract the first word of "dlltool", so it can be a program name with args.
+set dummy dlltool; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_DLLTOOL+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$ac_ct_DLLTOOL"; then
+ ac_cv_prog_ac_ct_DLLTOOL="$ac_ct_DLLTOOL" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_ac_ct_DLLTOOL="dlltool"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_DLLTOOL=$ac_cv_prog_ac_ct_DLLTOOL
+if test -n "$ac_ct_DLLTOOL"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_DLLTOOL" >&5
+$as_echo "$ac_ct_DLLTOOL" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+ if test "x$ac_ct_DLLTOOL" = x; then
+ DLLTOOL="false"
+ else
+ case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+ DLLTOOL=$ac_ct_DLLTOOL
+ fi
+else
+ DLLTOOL="$ac_cv_prog_DLLTOOL"
+fi
+
+test -z "$DLLTOOL" && DLLTOOL=dlltool
+
+
+
+
+
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to associate runtime and link libraries" >&5
+$as_echo_n "checking how to associate runtime and link libraries... " >&6; }
+if ${lt_cv_sharedlib_from_linklib_cmd+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ lt_cv_sharedlib_from_linklib_cmd='unknown'
+
+case $host_os in
+cygwin* | mingw* | pw32* | cegcc*)
+ # two different shell functions defined in ltmain.sh;
+ # decide which one to use based on capabilities of $DLLTOOL
+ case `$DLLTOOL --help 2>&1` in
+ *--identify-strict*)
+ lt_cv_sharedlib_from_linklib_cmd=func_cygming_dll_for_implib
+ ;;
+ *)
+ lt_cv_sharedlib_from_linklib_cmd=func_cygming_dll_for_implib_fallback
+ ;;
+ esac
+ ;;
+*)
+ # fallback: assume linklib IS sharedlib
+ lt_cv_sharedlib_from_linklib_cmd=$ECHO
+ ;;
+esac
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_sharedlib_from_linklib_cmd" >&5
+$as_echo "$lt_cv_sharedlib_from_linklib_cmd" >&6; }
+sharedlib_from_linklib_cmd=$lt_cv_sharedlib_from_linklib_cmd
+test -z "$sharedlib_from_linklib_cmd" && sharedlib_from_linklib_cmd=$ECHO
+
+
+
+
+
+
+
+
+if test -n "$ac_tool_prefix"; then
+ for ac_prog in ar
+ do
+ # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args.
+set dummy $ac_tool_prefix$ac_prog; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
if ${ac_cv_prog_AR+:} false; then :
$as_echo_n "(cached) " >&6
else
@@ -6189,7 +6586,7 @@
test -z "$as_dir" && as_dir=.
for ac_exec_ext in '' $ac_executable_extensions; do
if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_prog_AR="${ac_tool_prefix}ar"
+ ac_cv_prog_AR="$ac_tool_prefix$ac_prog"
$as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
break 2
fi
@@ -6209,11 +6606,15 @@
fi
+ test -n "$AR" && break
+ done
fi
-if test -z "$ac_cv_prog_AR"; then
+if test -z "$AR"; then
ac_ct_AR=$AR
- # Extract the first word of "ar", so it can be a program name with args.
-set dummy ar; ac_word=$2
+ for ac_prog in ar
+do
+ # Extract the first word of "$ac_prog", so it can be a program name with args.
+set dummy $ac_prog; ac_word=$2
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
$as_echo_n "checking for $ac_word... " >&6; }
if ${ac_cv_prog_ac_ct_AR+:} false; then :
@@ -6229,7 +6630,7 @@
test -z "$as_dir" && as_dir=.
for ac_exec_ext in '' $ac_executable_extensions; do
if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_prog_ac_ct_AR="ar"
+ ac_cv_prog_ac_ct_AR="$ac_prog"
$as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
break 2
fi
@@ -6248,6 +6649,10 @@
$as_echo "no" >&6; }
fi
+
+ test -n "$ac_ct_AR" && break
+done
+
if test "x$ac_ct_AR" = x; then
AR="false"
else
@@ -6259,12 +6664,10 @@
esac
AR=$ac_ct_AR
fi
-else
- AR="$ac_cv_prog_AR"
fi
-test -z "$AR" && AR=ar
-test -z "$AR_FLAGS" && AR_FLAGS=cru
+: ${AR=ar}
+: ${AR_FLAGS=cru}
@@ -6276,6 +6679,64 @@
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for archiver @FILE support" >&5
+$as_echo_n "checking for archiver @FILE support... " >&6; }
+if ${lt_cv_ar_at_file+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ lt_cv_ar_at_file=no
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+int
+main ()
+{
+
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+ echo conftest.$ac_objext > conftest.lst
+ lt_ar_try='$AR $AR_FLAGS libconftest.a @conftest.lst >&5'
+ { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$lt_ar_try\""; } >&5
+ (eval $lt_ar_try) 2>&5
+ ac_status=$?
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; }
+ if test 0 -eq "$ac_status"; then
+ # Ensure the archiver fails upon bogus file names.
+ rm -f conftest.$ac_objext libconftest.a
+ { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$lt_ar_try\""; } >&5
+ (eval $lt_ar_try) 2>&5
+ ac_status=$?
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; }
+ if test 0 -ne "$ac_status"; then
+ lt_cv_ar_at_file=@
+ fi
+ fi
+ rm -f conftest.* libconftest.a
+
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_ar_at_file" >&5
+$as_echo "$lt_cv_ar_at_file" >&6; }
+
+if test no = "$lt_cv_ar_at_file"; then
+ archiver_list_spec=
+else
+ archiver_list_spec=$lt_cv_ar_at_file
+fi
+
+
+
+
+
+
+
if test -n "$ac_tool_prefix"; then
# Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args.
set dummy ${ac_tool_prefix}strip; ac_word=$2
@@ -6481,16 +6942,22 @@
if test -n "$RANLIB"; then
case $host_os in
- openbsd*)
- old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB -t \$oldlib"
+ bitrig* | openbsd*)
+ old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB -t \$tool_oldlib"
;;
*)
- old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB \$oldlib"
+ old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB \$tool_oldlib"
;;
esac
- old_archive_cmds="$old_archive_cmds~\$RANLIB \$oldlib"
+ old_archive_cmds="$old_archive_cmds~\$RANLIB \$tool_oldlib"
fi
+case $host_os in
+ darwin*)
+ lock_old_archive_extraction=yes ;;
+ *)
+ lock_old_archive_extraction=no ;;
+esac
@@ -6524,6 +6991,12 @@
+
+
+
+
+
+
# If no C compiler was specified, use CC.
LTCC=${LTCC-"$CC"}
@@ -6559,7 +7032,7 @@
symcode='[ABCDGISTW]'
;;
hpux*)
- if test "$host_cpu" = ia64; then
+ if test ia64 = "$host_cpu"; then
symcode='[ABCDEGRST]'
fi
;;
@@ -6592,15 +7065,45 @@
symcode='[ABCDGIRSTW]' ;;
esac
+if test "$lt_cv_nm_interface" = "MS dumpbin"; then
+ # Gets list of data symbols to import.
+ lt_cv_sys_global_symbol_to_import="sed -n -e 's/^I .* \(.*\)$/\1/p'"
+ # Adjust the below global symbol transforms to fixup imported variables.
+ lt_cdecl_hook=" -e 's/^I .* \(.*\)$/extern __declspec(dllimport) char \1;/p'"
+ lt_c_name_hook=" -e 's/^I .* \(.*\)$/ {\"\1\", (void *) 0},/p'"
+ lt_c_name_lib_hook="\
+ -e 's/^I .* \(lib.*\)$/ {\"\1\", (void *) 0},/p'\
+ -e 's/^I .* \(.*\)$/ {\"lib\1\", (void *) 0},/p'"
+else
+ # Disable hooks by default.
+ lt_cv_sys_global_symbol_to_import=
+ lt_cdecl_hook=
+ lt_c_name_hook=
+ lt_c_name_lib_hook=
+fi
+
# Transform an extracted symbol line into a proper C declaration.
# Some systems (esp. on ia64) link data and code symbols differently,
# so use this general approach.
-lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'"
+lt_cv_sys_global_symbol_to_cdecl="sed -n"\
+$lt_cdecl_hook\
+" -e 's/^T .* \(.*\)$/extern int \1();/p'"\
+" -e 's/^$symcode$symcode* .* \(.*\)$/extern char \1;/p'"
# Transform an extracted symbol line into symbol name and symbol address
-lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([^ ]*\) $/ {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* \([^ ]*\) \([^ ]*\)$/ {\"\2\", (void *) \&\2},/p'"
-lt_cv_sys_global_symbol_to_c_name_address_lib_prefix="sed -n -e 's/^: \([^ ]*\) $/ {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* \([^ ]*\) \(lib[^ ]*\)$/ {\"\2\", (void *) \&\2},/p' -e 's/^$symcode* \([^ ]*\) \([^ ]*\)$/ {\"lib\2\", (void *) \&\2},/p'"
+lt_cv_sys_global_symbol_to_c_name_address="sed -n"\
+$lt_c_name_hook\
+" -e 's/^: \(.*\) .*$/ {\"\1\", (void *) 0},/p'"\
+" -e 's/^$symcode$symcode* .* \(.*\)$/ {\"\1\", (void *) \&\1},/p'"
+# Transform an extracted symbol line into symbol name with lib prefix and
+# symbol address.
+lt_cv_sys_global_symbol_to_c_name_address_lib_prefix="sed -n"\
+$lt_c_name_lib_hook\
+" -e 's/^: \(.*\) .*$/ {\"\1\", (void *) 0},/p'"\
+" -e 's/^$symcode$symcode* .* \(lib.*\)$/ {\"\1\", (void *) \&\1},/p'"\
+" -e 's/^$symcode$symcode* .* \(.*\)$/ {\"lib\1\", (void *) \&\1},/p'"
+
# Handle CRLF in mingw tool chain
opt_cr=
case $build_os in
@@ -6617,24 +7120,29 @@
# Write the raw and C identifiers.
if test "$lt_cv_nm_interface" = "MS dumpbin"; then
- # Fake it for dumpbin and say T for any non-static function
- # and D for any global variable.
+ # Fake it for dumpbin and say T for any non-static function,
+ # D for any global variable and I for any imported variable.
# Also find C++ and __fastcall symbols from MSVC++,
# which start with @ or ?.
lt_cv_sys_global_symbol_pipe="$AWK '"\
" {last_section=section; section=\$ 3};"\
+" /^COFF SYMBOL TABLE/{for(i in hide) delete hide[i]};"\
" /Section length .*#relocs.*(pick any)/{hide[last_section]=1};"\
+" /^ *Symbol name *: /{split(\$ 0,sn,\":\"); si=substr(sn[2],2)};"\
+" /^ *Type *: code/{print \"T\",si,substr(si,length(prfx))};"\
+" /^ *Type *: data/{print \"I\",si,substr(si,length(prfx))};"\
" \$ 0!~/External *\|/{next};"\
" / 0+ UNDEF /{next}; / UNDEF \([^|]\)*()/{next};"\
" {if(hide[section]) next};"\
-" {f=0}; \$ 0~/\(\).*\|/{f=1}; {printf f ? \"T \" : \"D \"};"\
-" {split(\$ 0, a, /\||\r/); split(a[2], s)};"\
-" s[1]~/^[@?]/{print s[1], s[1]; next};"\
-" s[1]~prfx {split(s[1],t,\"@\"); print t[1], substr(t[1],length(prfx))}"\
+" {f=\"D\"}; \$ 0~/\(\).*\|/{f=\"T\"};"\
+" {split(\$ 0,a,/\||\r/); split(a[2],s)};"\
+" s[1]~/^[@?]/{print f,s[1],s[1]; next};"\
+" s[1]~prfx {split(s[1],t,\"@\"); print f,t[1],substr(t[1],length(prfx))}"\
" ' prfx=^$ac_symprfx"
else
lt_cv_sys_global_symbol_pipe="sed -n -e 's/^.*[ ]\($symcode$symcode*\)[ ][ ]*$ac_symprfx$sympat$opt_cr$/$symxfrm/p'"
fi
+ lt_cv_sys_global_symbol_pipe="$lt_cv_sys_global_symbol_pipe | sed '/ __gnu_lto/d'"
# Check to see that the pipe works correctly.
pipe_works=no
@@ -6660,8 +7168,8 @@
test $ac_status = 0; }; then
# Now try to grab the symbols.
nlist=conftest.nm
- if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$NM conftest.$ac_objext \| $lt_cv_sys_global_symbol_pipe \> $nlist\""; } >&5
- (eval $NM conftest.$ac_objext \| $lt_cv_sys_global_symbol_pipe \> $nlist) 2>&5
+ if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$NM conftest.$ac_objext \| "$lt_cv_sys_global_symbol_pipe" \> $nlist\""; } >&5
+ (eval $NM conftest.$ac_objext \| "$lt_cv_sys_global_symbol_pipe" \> $nlist) 2>&5
ac_status=$?
$as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
test $ac_status = 0; } && test -s "$nlist"; then
@@ -6676,6 +7184,18 @@
if $GREP ' nm_test_var$' "$nlist" >/dev/null; then
if $GREP ' nm_test_func$' "$nlist" >/dev/null; then
cat <<_LT_EOF > conftest.$ac_ext
+/* Keep this code in sync between libtool.m4, ltmain, lt_system.h, and tests. */
+#if defined _WIN32 || defined __CYGWIN__ || defined _WIN32_WCE
+/* DATA imports from DLLs on WIN32 can't be const, because runtime
+ relocations are performed -- see ld's documentation on pseudo-relocs. */
+# define LT_DLSYM_CONST
+#elif defined __osf__
+/* This system does not cope well with relocations in const data. */
+# define LT_DLSYM_CONST
+#else
+# define LT_DLSYM_CONST const
+#endif
+
#ifdef __cplusplus
extern "C" {
#endif
@@ -6687,7 +7207,7 @@
cat <<_LT_EOF >> conftest.$ac_ext
/* The mapping between symbol names and symbols. */
-const struct {
+LT_DLSYM_CONST struct {
const char *name;
void *address;
}
@@ -6695,7 +7215,7 @@
{
{ "@PROGRAM@", (void *) 0 },
_LT_EOF
- $SED "s/^$symcode$symcode* \(.*\) \(.*\)$/ {\"\2\", (void *) \&\2},/" < "$nlist" | $GREP -v main >> conftest.$ac_ext
+ $SED "s/^$symcode$symcode* .* \(.*\)$/ {\"\1\", (void *) \&\1},/" < "$nlist" | $GREP -v main >> conftest.$ac_ext
cat <<\_LT_EOF >> conftest.$ac_ext
{0, (void *) 0}
};
@@ -6713,19 +7233,19 @@
_LT_EOF
# Now try linking the two files.
mv conftest.$ac_objext conftstm.$ac_objext
- lt_save_LIBS="$LIBS"
- lt_save_CFLAGS="$CFLAGS"
- LIBS="conftstm.$ac_objext"
+ lt_globsym_save_LIBS=$LIBS
+ lt_globsym_save_CFLAGS=$CFLAGS
+ LIBS=conftstm.$ac_objext
CFLAGS="$CFLAGS$lt_prog_compiler_no_builtin_flag"
if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_link\""; } >&5
(eval $ac_link) 2>&5
ac_status=$?
$as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
- test $ac_status = 0; } && test -s conftest${ac_exeext}; then
+ test $ac_status = 0; } && test -s conftest$ac_exeext; then
pipe_works=yes
fi
- LIBS="$lt_save_LIBS"
- CFLAGS="$lt_save_CFLAGS"
+ LIBS=$lt_globsym_save_LIBS
+ CFLAGS=$lt_globsym_save_CFLAGS
else
echo "cannot find nm_test_func in $nlist" >&5
fi
@@ -6742,7 +7262,7 @@
rm -rf conftest* conftst*
# Do not use the global_symbol_pipe unless it works.
- if test "$pipe_works" = yes; then
+ if test yes = "$pipe_works"; then
break
else
lt_cv_sys_global_symbol_pipe=
@@ -6762,6 +7282,12 @@
$as_echo "ok" >&6; }
fi
+# Response file support.
+if test "$lt_cv_nm_interface" = "MS dumpbin"; then
+ nm_file_list_spec='@'
+elif $NM --help 2>/dev/null | grep '[@]FILE' >/dev/null; then
+ nm_file_list_spec='@'
+fi
@@ -6784,18 +7310,151 @@
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for sysroot" >&5
+$as_echo_n "checking for sysroot... " >&6; }
+
+# Check whether --with-sysroot was given.
+if test "${with_sysroot+set}" = set; then :
+ withval=$with_sysroot;
+else
+ with_sysroot=no
+fi
+
+
+lt_sysroot=
+case $with_sysroot in #(
+ yes)
+ if test yes = "$GCC"; then
+ lt_sysroot=`$CC --print-sysroot 2>/dev/null`
+ fi
+ ;; #(
+ /*)
+ lt_sysroot=`echo "$with_sysroot" | sed -e "$sed_quote_subst"`
+ ;; #(
+ no|'')
+ ;; #(
+ *)
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $with_sysroot" >&5
+$as_echo "$with_sysroot" >&6; }
+ as_fn_error $? "The sysroot must be an absolute path." "$LINENO" 5
+ ;;
+esac
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: ${lt_sysroot:-no}" >&5
+$as_echo "${lt_sysroot:-no}" >&6; }
+
+
+
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for a working dd" >&5
+$as_echo_n "checking for a working dd... " >&6; }
+if ${ac_cv_path_lt_DD+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ printf 0123456789abcdef0123456789abcdef >conftest.i
+cat conftest.i conftest.i >conftest2.i
+: ${lt_DD:=$DD}
+if test -z "$lt_DD"; then
+ ac_path_lt_DD_found=false
+ # Loop through the user's path and test for each of PROGNAME-LIST
+ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_prog in dd; do
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ ac_path_lt_DD="$as_dir/$ac_prog$ac_exec_ext"
+ as_fn_executable_p "$ac_path_lt_DD" || continue
+if "$ac_path_lt_DD" bs=32 count=1 <conftest2.i >conftest.out 2>/dev/null; then
+ cmp -s conftest.i conftest.out \
+ && ac_cv_path_lt_DD="$ac_path_lt_DD" ac_path_lt_DD_found=:
+fi
+ $ac_path_lt_DD_found && break 3
+ done
+ done
+ done
+IFS=$as_save_IFS
+ if test -z "$ac_cv_path_lt_DD"; then
+ :
+ fi
+else
+ ac_cv_path_lt_DD=$lt_DD
+fi
+
+rm -f conftest.i conftest2.i conftest.out
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_lt_DD" >&5
+$as_echo "$ac_cv_path_lt_DD" >&6; }
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to truncate binary pipes" >&5
+$as_echo_n "checking how to truncate binary pipes... " >&6; }
+if ${lt_cv_truncate_bin+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ printf 0123456789abcdef0123456789abcdef >conftest.i
+cat conftest.i conftest.i >conftest2.i
+lt_cv_truncate_bin=
+if "$ac_cv_path_lt_DD" bs=32 count=1 <conftest2.i >conftest.out 2>/dev/null; then
+ cmp -s conftest.i conftest.out \
+ && lt_cv_truncate_bin="$ac_cv_path_lt_DD bs=4096 count=1"
+fi
+rm -f conftest.i conftest2.i conftest.out
+test -z "$lt_cv_truncate_bin" && lt_cv_truncate_bin="$SED -e 4q"
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_truncate_bin" >&5
+$as_echo "$lt_cv_truncate_bin" >&6; }
+
+
+
+
+
+
+
+# Calculate cc_basename. Skip known compiler wrappers and cross-prefix.
+func_cc_basename ()
+{
+ for cc_temp in $*""; do
+ case $cc_temp in
+ compile | *[\\/]compile | ccache | *[\\/]ccache ) ;;
+ distcc | *[\\/]distcc | purify | *[\\/]purify ) ;;
+ \-*) ;;
+ *) break;;
+ esac
+ done
+ func_cc_basename_result=`$ECHO "$cc_temp" | $SED "s%.*/%%; s%^$host_alias-%%"`
+}
+
# Check whether --enable-libtool-lock was given.
if test "${enable_libtool_lock+set}" = set; then :
enableval=$enable_libtool_lock;
fi
-test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes
+test no = "$enable_libtool_lock" || enable_libtool_lock=yes
# Some flags need to be propagated to the compiler or linker for good
# libtool support.
case $host in
ia64-*-hpux*)
- # Find out which ABI we are using.
+ # Find out what ABI is being produced by ac_compile, and set mode
+ # options accordingly.
echo 'int i;' > conftest.$ac_ext
if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5
(eval $ac_compile) 2>&5
@@ -6804,10 +7463,10 @@
test $ac_status = 0; }; then
case `/usr/bin/file conftest.$ac_objext` in
*ELF-32*)
- HPUX_IA64_MODE="32"
+ HPUX_IA64_MODE=32
;;
*ELF-64*)
- HPUX_IA64_MODE="64"
+ HPUX_IA64_MODE=64
;;
esac
fi
@@ -6814,14 +7473,15 @@
rm -rf conftest*
;;
*-*-irix6*)
- # Find out which ABI we are using.
- echo '#line 6818 "configure"' > conftest.$ac_ext
+ # Find out what ABI is being produced by ac_compile, and set linker
+ # options accordingly.
+ echo '#line '$LINENO' "configure"' > conftest.$ac_ext
if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5
(eval $ac_compile) 2>&5
ac_status=$?
$as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
test $ac_status = 0; }; then
- if test "$lt_cv_prog_gnu_ld" = yes; then
+ if test yes = "$lt_cv_prog_gnu_ld"; then
case `/usr/bin/file conftest.$ac_objext` in
*32-bit*)
LD="${LD-ld} -melf32bsmip"
@@ -6850,9 +7510,50 @@
rm -rf conftest*
;;
-x86_64-*kfreebsd*-gnu|x86_64-*linux*|ppc*-*linux*|powerpc*-*linux*| \
+mips64*-*linux*)
+ # Find out what ABI is being produced by ac_compile, and set linker
+ # options accordingly.
+ echo '#line '$LINENO' "configure"' > conftest.$ac_ext
+ if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5
+ (eval $ac_compile) 2>&5
+ ac_status=$?
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; }; then
+ emul=elf
+ case `/usr/bin/file conftest.$ac_objext` in
+ *32-bit*)
+ emul="${emul}32"
+ ;;
+ *64-bit*)
+ emul="${emul}64"
+ ;;
+ esac
+ case `/usr/bin/file conftest.$ac_objext` in
+ *MSB*)
+ emul="${emul}btsmip"
+ ;;
+ *LSB*)
+ emul="${emul}ltsmip"
+ ;;
+ esac
+ case `/usr/bin/file conftest.$ac_objext` in
+ *N32*)
+ emul="${emul}n32"
+ ;;
+ esac
+ LD="${LD-ld} -m $emul"
+ fi
+ rm -rf conftest*
+ ;;
+
+x86_64-*kfreebsd*-gnu|x86_64-*linux*|powerpc*-*linux*| \
s390*-*linux*|s390*-*tpf*|sparc*-*linux*)
- # Find out which ABI we are using.
+ # Find out what ABI is being produced by ac_compile, and set linker
+ # options accordingly. Note that the listed cases only cover the
+ # situations where additional linker options are needed (such as when
+ # doing 32-bit compilation for a host where ld defaults to 64-bit, or
+ # vice versa); the common cases where no linker options are needed do
+ # not appear in the list.
echo 'int i;' > conftest.$ac_ext
if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5
(eval $ac_compile) 2>&5
@@ -6866,9 +7567,19 @@
LD="${LD-ld} -m elf_i386_fbsd"
;;
x86_64-*linux*)
- LD="${LD-ld} -m elf_i386"
+ case `/usr/bin/file conftest.o` in
+ *x86-64*)
+ LD="${LD-ld} -m elf32_x86_64"
+ ;;
+ *)
+ LD="${LD-ld} -m elf_i386"
+ ;;
+ esac
;;
- ppc64-*linux*|powerpc64-*linux*)
+ powerpc64le-*linux*)
+ LD="${LD-ld} -m elf32lppclinux"
+ ;;
+ powerpc64-*linux*)
LD="${LD-ld} -m elf32ppclinux"
;;
s390x-*linux*)
@@ -6887,7 +7598,10 @@
x86_64-*linux*)
LD="${LD-ld} -m elf_x86_64"
;;
- ppc*-*linux*|powerpc*-*linux*)
+ powerpcle-*linux*)
+ LD="${LD-ld} -m elf64lppc"
+ ;;
+ powerpc-*linux*)
LD="${LD-ld} -m elf64ppc"
;;
s390*-*linux*|s390*-*tpf*)
@@ -6905,7 +7619,7 @@
*-*-sco3.2v5*)
# On SCO OpenServer 5, we need -belf to get full-featured binaries.
- SAVE_CFLAGS="$CFLAGS"
+ SAVE_CFLAGS=$CFLAGS
CFLAGS="$CFLAGS -belf"
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the C compiler needs -belf" >&5
$as_echo_n "checking whether the C compiler needs -belf... " >&6; }
@@ -6945,13 +7659,14 @@
fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_cc_needs_belf" >&5
$as_echo "$lt_cv_cc_needs_belf" >&6; }
- if test x"$lt_cv_cc_needs_belf" != x"yes"; then
+ if test yes != "$lt_cv_cc_needs_belf"; then
# this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf
- CFLAGS="$SAVE_CFLAGS"
+ CFLAGS=$SAVE_CFLAGS
fi
;;
-sparc*-*solaris*)
- # Find out which ABI we are using.
+*-*solaris*)
+ # Find out what ABI is being produced by ac_compile, and set linker
+ # options accordingly.
echo 'int i;' > conftest.$ac_ext
if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5
(eval $ac_compile) 2>&5
@@ -6961,7 +7676,20 @@
case `/usr/bin/file conftest.o` in
*64-bit*)
case $lt_cv_prog_gnu_ld in
- yes*) LD="${LD-ld} -m elf64_sparc" ;;
+ yes*)
+ case $host in
+ i?86-*-solaris*|x86_64-*-solaris*)
+ LD="${LD-ld} -m elf_x86_64"
+ ;;
+ sparc*-*-solaris*)
+ LD="${LD-ld} -m elf64_sparc"
+ ;;
+ esac
+ # GNU ld 2.21 introduced _sol2 emulations. Use them if available.
+ if ${LD-ld} -V | grep _sol2 >/dev/null 2>&1; then
+ LD=${LD-ld}_sol2
+ fi
+ ;;
*)
if ${LD-ld} -64 -r -o conftest2.o conftest.o >/dev/null 2>&1; then
LD="${LD-ld} -64"
@@ -6975,9 +7703,126 @@
;;
esac
-need_locks="$enable_libtool_lock"
+need_locks=$enable_libtool_lock
+if test -n "$ac_tool_prefix"; then
+ # Extract the first word of "${ac_tool_prefix}mt", so it can be a program name with args.
+set dummy ${ac_tool_prefix}mt; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_MANIFEST_TOOL+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$MANIFEST_TOOL"; then
+ ac_cv_prog_MANIFEST_TOOL="$MANIFEST_TOOL" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_MANIFEST_TOOL="${ac_tool_prefix}mt"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+fi
+fi
+MANIFEST_TOOL=$ac_cv_prog_MANIFEST_TOOL
+if test -n "$MANIFEST_TOOL"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $MANIFEST_TOOL" >&5
+$as_echo "$MANIFEST_TOOL" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_MANIFEST_TOOL"; then
+ ac_ct_MANIFEST_TOOL=$MANIFEST_TOOL
+ # Extract the first word of "mt", so it can be a program name with args.
+set dummy mt; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_MANIFEST_TOOL+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$ac_ct_MANIFEST_TOOL"; then
+ ac_cv_prog_ac_ct_MANIFEST_TOOL="$ac_ct_MANIFEST_TOOL" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_ac_ct_MANIFEST_TOOL="mt"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_MANIFEST_TOOL=$ac_cv_prog_ac_ct_MANIFEST_TOOL
+if test -n "$ac_ct_MANIFEST_TOOL"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_MANIFEST_TOOL" >&5
+$as_echo "$ac_ct_MANIFEST_TOOL" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+ if test "x$ac_ct_MANIFEST_TOOL" = x; then
+ MANIFEST_TOOL=":"
+ else
+ case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+ MANIFEST_TOOL=$ac_ct_MANIFEST_TOOL
+ fi
+else
+ MANIFEST_TOOL="$ac_cv_prog_MANIFEST_TOOL"
+fi
+
+test -z "$MANIFEST_TOOL" && MANIFEST_TOOL=mt
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if $MANIFEST_TOOL is a manifest tool" >&5
+$as_echo_n "checking if $MANIFEST_TOOL is a manifest tool... " >&6; }
+if ${lt_cv_path_mainfest_tool+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ lt_cv_path_mainfest_tool=no
+ echo "$as_me:$LINENO: $MANIFEST_TOOL '-?'" >&5
+ $MANIFEST_TOOL '-?' 2>conftest.err > conftest.out
+ cat conftest.err >&5
+ if $GREP 'Manifest Tool' conftest.out > /dev/null; then
+ lt_cv_path_mainfest_tool=yes
+ fi
+ rm -f conftest*
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_path_mainfest_tool" >&5
+$as_echo "$lt_cv_path_mainfest_tool" >&6; }
+if test yes != "$lt_cv_path_mainfest_tool"; then
+ MANIFEST_TOOL=:
+fi
+
+
+
+
+
+
case $host_os in
rhapsody* | darwin*)
if test -n "$ac_tool_prefix"; then
@@ -7472,7 +8317,7 @@
$as_echo_n "(cached) " >&6
else
lt_cv_apple_cc_single_mod=no
- if test -z "${LT_MULTI_MODULE}"; then
+ if test -z "$LT_MULTI_MODULE"; then
# By default we will add the -single_module flag. You can override
# by either setting the environment variable LT_MULTI_MODULE
# non-empty at configure time, or by adding -multi_module to the
@@ -7484,7 +8329,13 @@
$LTCC $LTCFLAGS $LDFLAGS -o libconftest.dylib \
-dynamiclib -Wl,-single_module conftest.c 2>conftest.err
_lt_result=$?
- if test -f libconftest.dylib && test ! -s conftest.err && test $_lt_result = 0; then
+ # If there is a non-empty error log, and "single_module"
+ # appears in it, assume the flag caused a linker warning
+ if test -s conftest.err && $GREP single_module conftest.err; then
+ cat conftest.err >&5
+ # Otherwise, if the output was created with a 0 exit code from
+ # the compiler, it worked.
+ elif test -f libconftest.dylib && test 0 = "$_lt_result"; then
lt_cv_apple_cc_single_mod=yes
else
cat conftest.err >&5
@@ -7495,6 +8346,7 @@
fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_apple_cc_single_mod" >&5
$as_echo "$lt_cv_apple_cc_single_mod" >&6; }
+
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for -exported_symbols_list linker flag" >&5
$as_echo_n "checking for -exported_symbols_list linker flag... " >&6; }
if ${lt_cv_ld_exported_symbols_list+:} false; then :
@@ -7522,16 +8374,51 @@
fi
rm -f core conftest.err conftest.$ac_objext \
conftest$ac_exeext conftest.$ac_ext
- LDFLAGS="$save_LDFLAGS"
+ LDFLAGS=$save_LDFLAGS
fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_ld_exported_symbols_list" >&5
$as_echo "$lt_cv_ld_exported_symbols_list" >&6; }
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for -force_load linker flag" >&5
+$as_echo_n "checking for -force_load linker flag... " >&6; }
+if ${lt_cv_ld_force_load+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ lt_cv_ld_force_load=no
+ cat > conftest.c << _LT_EOF
+int forced_loaded() { return 2;}
+_LT_EOF
+ echo "$LTCC $LTCFLAGS -c -o conftest.o conftest.c" >&5
+ $LTCC $LTCFLAGS -c -o conftest.o conftest.c 2>&5
+ echo "$AR cru libconftest.a conftest.o" >&5
+ $AR cru libconftest.a conftest.o 2>&5
+ echo "$RANLIB libconftest.a" >&5
+ $RANLIB libconftest.a 2>&5
+ cat > conftest.c << _LT_EOF
+int main() { return 0;}
+_LT_EOF
+ echo "$LTCC $LTCFLAGS $LDFLAGS -o conftest conftest.c -Wl,-force_load,./libconftest.a" >&5
+ $LTCC $LTCFLAGS $LDFLAGS -o conftest conftest.c -Wl,-force_load,./libconftest.a 2>conftest.err
+ _lt_result=$?
+ if test -s conftest.err && $GREP force_load conftest.err; then
+ cat conftest.err >&5
+ elif test -f conftest && test 0 = "$_lt_result" && $GREP forced_load conftest >/dev/null 2>&1; then
+ lt_cv_ld_force_load=yes
+ else
+ cat conftest.err >&5
+ fi
+ rm -f conftest.err libconftest.a conftest conftest.c
+ rm -rf conftest.dSYM
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_ld_force_load" >&5
+$as_echo "$lt_cv_ld_force_load" >&6; }
case $host_os in
rhapsody* | darwin1.[012])
- _lt_dar_allow_undefined='${wl}-undefined ${wl}suppress' ;;
+ _lt_dar_allow_undefined='$wl-undefined ${wl}suppress' ;;
darwin1.*)
- _lt_dar_allow_undefined='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ;;
+ _lt_dar_allow_undefined='$wl-flat_namespace $wl-undefined ${wl}suppress' ;;
darwin*) # darwin 5.x on
# if running on 10.5 or later, the deployment target defaults
# to the OS version, if on x86, and 10.4, the deployment
@@ -7538,23 +8425,23 @@
# target defaults to 10.4. Don't you love it?
case ${MACOSX_DEPLOYMENT_TARGET-10.0},$host in
10.0,*86*-darwin8*|10.0,*-darwin[91]*)
- _lt_dar_allow_undefined='${wl}-undefined ${wl}dynamic_lookup' ;;
- 10.[012]*)
- _lt_dar_allow_undefined='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ;;
+ _lt_dar_allow_undefined='$wl-undefined ${wl}dynamic_lookup' ;;
+ 10.[012][,.]*)
+ _lt_dar_allow_undefined='$wl-flat_namespace $wl-undefined ${wl}suppress' ;;
10.*)
- _lt_dar_allow_undefined='${wl}-undefined ${wl}dynamic_lookup' ;;
+ _lt_dar_allow_undefined='$wl-undefined ${wl}dynamic_lookup' ;;
esac
;;
esac
- if test "$lt_cv_apple_cc_single_mod" = "yes"; then
+ if test yes = "$lt_cv_apple_cc_single_mod"; then
_lt_dar_single_mod='$single_module'
fi
- if test "$lt_cv_ld_exported_symbols_list" = "yes"; then
- _lt_dar_export_syms=' ${wl}-exported_symbols_list,$output_objdir/${libname}-symbols.expsym'
+ if test yes = "$lt_cv_ld_exported_symbols_list"; then
+ _lt_dar_export_syms=' $wl-exported_symbols_list,$output_objdir/$libname-symbols.expsym'
else
- _lt_dar_export_syms='~$NMEDIT -s $output_objdir/${libname}-symbols.expsym ${lib}'
+ _lt_dar_export_syms='~$NMEDIT -s $output_objdir/$libname-symbols.expsym $lib'
fi
- if test "$DSYMUTIL" != ":"; then
+ if test : != "$DSYMUTIL" && test no = "$lt_cv_ld_force_load"; then
_lt_dsymutil='~$DSYMUTIL $lib || :'
else
_lt_dsymutil=
@@ -7562,6 +8449,41 @@
;;
esac
+# func_munge_path_list VARIABLE PATH
+# -----------------------------------
+# VARIABLE is name of variable containing _space_ separated list of
+# directories to be munged by the contents of PATH, which is string
+# having a format:
+# "DIR[:DIR]:"
+# string "DIR[ DIR]" will be prepended to VARIABLE
+# ":DIR[:DIR]"
+# string "DIR[ DIR]" will be appended to VARIABLE
+# "DIRP[:DIRP]::[DIRA:]DIRA"
+# string "DIRP[ DIRP]" will be prepended to VARIABLE and string
+# "DIRA[ DIRA]" will be appended to VARIABLE
+# "DIR[:DIR]"
+# VARIABLE will be replaced by "DIR[ DIR]"
+func_munge_path_list ()
+{
+ case x$2 in
+ x)
+ ;;
+ *:)
+ eval $1=\"`$ECHO $2 | $SED 's/:/ /g'` \$$1\"
+ ;;
+ x:*)
+ eval $1=\"\$$1 `$ECHO $2 | $SED 's/:/ /g'`\"
+ ;;
+ *::*)
+ eval $1=\"\$$1\ `$ECHO $2 | $SED -e 's/.*:://' -e 's/:/ /g'`\"
+ eval $1=\"`$ECHO $2 | $SED -e 's/::.*//' -e 's/:/ /g'`\ \$$1\"
+ ;;
+ *)
+ eval $1=\"`$ECHO $2 | $SED 's/:/ /g'`\"
+ ;;
+ esac
+}
+
ac_ext=c
ac_cpp='$CPP $CPPFLAGS'
ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
@@ -7844,6 +8766,8 @@
+
+
# Set options
@@ -7861,14 +8785,14 @@
*)
enable_shared=no
# Look at the argument we got. We use all the common list separators.
- lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
+ lt_save_ifs=$IFS; IFS=$IFS$PATH_SEPARATOR,
for pkg in $enableval; do
- IFS="$lt_save_ifs"
+ IFS=$lt_save_ifs
if test "X$pkg" = "X$p"; then
enable_shared=yes
fi
done
- IFS="$lt_save_ifs"
+ IFS=$lt_save_ifs
;;
esac
else
@@ -7892,14 +8816,14 @@
*)
enable_static=no
# Look at the argument we got. We use all the common list separators.
- lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
+ lt_save_ifs=$IFS; IFS=$IFS$PATH_SEPARATOR,
for pkg in $enableval; do
- IFS="$lt_save_ifs"
+ IFS=$lt_save_ifs
if test "X$pkg" = "X$p"; then
enable_static=yes
fi
done
- IFS="$lt_save_ifs"
+ IFS=$lt_save_ifs
;;
esac
else
@@ -7917,13 +8841,27 @@
# Check whether --with-pic was given.
if test "${with_pic+set}" = set; then :
- withval=$with_pic; pic_mode="$withval"
+ withval=$with_pic; lt_p=${PACKAGE-default}
+ case $withval in
+ yes|no) pic_mode=$withval ;;
+ *)
+ pic_mode=default
+ # Look at the argument we got. We use all the common list separators.
+ lt_save_ifs=$IFS; IFS=$IFS$PATH_SEPARATOR,
+ for lt_pkg in $withval; do
+ IFS=$lt_save_ifs
+ if test "X$lt_pkg" = "X$lt_p"; then
+ pic_mode=yes
+ fi
+ done
+ IFS=$lt_save_ifs
+ ;;
+ esac
else
pic_mode=default
fi
-test -z "$pic_mode" && pic_mode=default
@@ -7930,7 +8868,6 @@
-
# Check whether --enable-fast-install was given.
if test "${enable_fast_install+set}" = set; then :
enableval=$enable_fast_install; p=${PACKAGE-default}
@@ -7940,14 +8877,14 @@
*)
enable_fast_install=no
# Look at the argument we got. We use all the common list separators.
- lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
+ lt_save_ifs=$IFS; IFS=$IFS$PATH_SEPARATOR,
for pkg in $enableval; do
- IFS="$lt_save_ifs"
+ IFS=$lt_save_ifs
if test "X$pkg" = "X$p"; then
enable_fast_install=yes
fi
done
- IFS="$lt_save_ifs"
+ IFS=$lt_save_ifs
;;
esac
else
@@ -7961,11 +8898,63 @@
+ shared_archive_member_spec=
+case $host,$enable_shared in
+power*-*-aix[5-9]*,yes)
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking which variant of shared library versioning to provide" >&5
+$as_echo_n "checking which variant of shared library versioning to provide... " >&6; }
+# Check whether --with-aix-soname was given.
+if test "${with_aix_soname+set}" = set; then :
+ withval=$with_aix_soname; case $withval in
+ aix|svr4|both)
+ ;;
+ *)
+ as_fn_error $? "Unknown argument to --with-aix-soname" "$LINENO" 5
+ ;;
+ esac
+ lt_cv_with_aix_soname=$with_aix_soname
+else
+ if ${lt_cv_with_aix_soname+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ lt_cv_with_aix_soname=aix
+fi
+ with_aix_soname=$lt_cv_with_aix_soname
+fi
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $with_aix_soname" >&5
+$as_echo "$with_aix_soname" >&6; }
+ if test aix != "$with_aix_soname"; then
+ # For the AIX way of multilib, we name the shared archive member
+ # based on the bitwidth used, traditionally 'shr.o' or 'shr_64.o',
+ # and 'shr.imp' or 'shr_64.imp', respectively, for the Import File.
+ # Even when GNU compilers ignore OBJECT_MODE but need '-maix64' flag,
+ # the AIX toolchain works better with OBJECT_MODE set (default 32).
+ if test 64 = "${OBJECT_MODE-32}"; then
+ shared_archive_member_spec=shr_64
+ else
+ shared_archive_member_spec=shr
+ fi
+ fi
+ ;;
+*)
+ with_aix_soname=aix
+ ;;
+esac
+
+
+
+
+
+
+
+
+
+
# This can be used to rebuild libtool when needed
-LIBTOOL_DEPS="$ltmain"
+LIBTOOL_DEPS=$ltmain
# Always use our own libtool.
LIBTOOL='$(SHELL) $(top_builddir)/libtool'
@@ -7994,6 +8983,11 @@
+
+
+
+
+
test -z "$LN_S" && LN_S="ln -s"
@@ -8009,7 +9003,7 @@
-if test -n "${ZSH_VERSION+set}" ; then
+if test -n "${ZSH_VERSION+set}"; then
setopt NO_GLOB_SUBST
fi
@@ -8043,25 +9037,12 @@
-
-
-
-
-
-
-
-
-
-
-
-
-
case $host_os in
aix3*)
# AIX sometimes has problems with the GCC collect2 program. For some
# reason, if we set the COLLECT_NAMES environment variable, the problems
# vanish in a puff of smoke.
- if test "X${COLLECT_NAMES+set}" != Xset; then
+ if test set != "${COLLECT_NAMES+set}"; then
COLLECT_NAMES=
export COLLECT_NAMES
fi
@@ -8068,35 +9049,18 @@
;;
esac
-# Sed substitution that helps us do robust quoting. It backslashifies
-# metacharacters that are still active within double-quoted strings.
-sed_quote_subst='s/\(["`$\\]\)/\\\1/g'
-
-# Same as above, but do not quote variable references.
-double_quote_subst='s/\(["`\\]\)/\\\1/g'
-
-# Sed substitution to delay expansion of an escaped shell variable in a
-# double_quote_subst'ed string.
-delay_variable_subst='s/\\\\\\\\\\\$/\\\\\\$/g'
-
-# Sed substitution to delay expansion of an escaped single quote.
-delay_single_quote_subst='s/'\''/'\'\\\\\\\'\''/g'
-
-# Sed substitution to avoid accidental globbing in evaled expressions
-no_glob_subst='s/\*/\\\*/g'
-
# Global variables:
ofile=libtool
can_build_shared=yes
-# All known linkers require a `.a' archive for static linking (except MSVC,
+# All known linkers require a '.a' archive for static linking (except MSVC,
# which needs '.lib').
libext=a
-with_gnu_ld="$lt_cv_prog_gnu_ld"
+with_gnu_ld=$lt_cv_prog_gnu_ld
-old_CC="$CC"
-old_CFLAGS="$CFLAGS"
+old_CC=$CC
+old_CFLAGS=$CFLAGS
# Set sane defaults for various variables
test -z "$CC" && CC=cc
@@ -8105,15 +9069,8 @@
test -z "$LD" && LD=ld
test -z "$ac_objext" && ac_objext=o
-for cc_temp in $compiler""; do
- case $cc_temp in
- compile | *[\\/]compile | ccache | *[\\/]ccache ) ;;
- distcc | *[\\/]distcc | purify | *[\\/]purify ) ;;
- \-*) ;;
- *) break;;
- esac
-done
-cc_basename=`$ECHO "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"`
+func_cc_basename $compiler
+cc_basename=$func_cc_basename_result
# Only perform the check for file, if the check method requires it
@@ -8128,22 +9085,22 @@
else
case $MAGIC_CMD in
[\\/*] | ?:[\\/]*)
- lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path.
+ lt_cv_path_MAGIC_CMD=$MAGIC_CMD # Let the user override the test with a path.
;;
*)
- lt_save_MAGIC_CMD="$MAGIC_CMD"
- lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
+ lt_save_MAGIC_CMD=$MAGIC_CMD
+ lt_save_ifs=$IFS; IFS=$PATH_SEPARATOR
ac_dummy="/usr/bin$PATH_SEPARATOR$PATH"
for ac_dir in $ac_dummy; do
- IFS="$lt_save_ifs"
+ IFS=$lt_save_ifs
test -z "$ac_dir" && ac_dir=.
- if test -f $ac_dir/${ac_tool_prefix}file; then
- lt_cv_path_MAGIC_CMD="$ac_dir/${ac_tool_prefix}file"
+ if test -f "$ac_dir/${ac_tool_prefix}file"; then
+ lt_cv_path_MAGIC_CMD=$ac_dir/"${ac_tool_prefix}file"
if test -n "$file_magic_test_file"; then
case $deplibs_check_method in
"file_magic "*)
file_magic_regex=`expr "$deplibs_check_method" : "file_magic \(.*\)"`
- MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
+ MAGIC_CMD=$lt_cv_path_MAGIC_CMD
if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null |
$EGREP "$file_magic_regex" > /dev/null; then
:
@@ -8166,13 +9123,13 @@
break
fi
done
- IFS="$lt_save_ifs"
- MAGIC_CMD="$lt_save_MAGIC_CMD"
+ IFS=$lt_save_ifs
+ MAGIC_CMD=$lt_save_MAGIC_CMD
;;
esac
fi
-MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
+MAGIC_CMD=$lt_cv_path_MAGIC_CMD
if test -n "$MAGIC_CMD"; then
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $MAGIC_CMD" >&5
$as_echo "$MAGIC_CMD" >&6; }
@@ -8194,22 +9151,22 @@
else
case $MAGIC_CMD in
[\\/*] | ?:[\\/]*)
- lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path.
+ lt_cv_path_MAGIC_CMD=$MAGIC_CMD # Let the user override the test with a path.
;;
*)
- lt_save_MAGIC_CMD="$MAGIC_CMD"
- lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
+ lt_save_MAGIC_CMD=$MAGIC_CMD
+ lt_save_ifs=$IFS; IFS=$PATH_SEPARATOR
ac_dummy="/usr/bin$PATH_SEPARATOR$PATH"
for ac_dir in $ac_dummy; do
- IFS="$lt_save_ifs"
+ IFS=$lt_save_ifs
test -z "$ac_dir" && ac_dir=.
- if test -f $ac_dir/file; then
- lt_cv_path_MAGIC_CMD="$ac_dir/file"
+ if test -f "$ac_dir/file"; then
+ lt_cv_path_MAGIC_CMD=$ac_dir/"file"
if test -n "$file_magic_test_file"; then
case $deplibs_check_method in
"file_magic "*)
file_magic_regex=`expr "$deplibs_check_method" : "file_magic \(.*\)"`
- MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
+ MAGIC_CMD=$lt_cv_path_MAGIC_CMD
if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null |
$EGREP "$file_magic_regex" > /dev/null; then
:
@@ -8232,13 +9189,13 @@
break
fi
done
- IFS="$lt_save_ifs"
- MAGIC_CMD="$lt_save_MAGIC_CMD"
+ IFS=$lt_save_ifs
+ MAGIC_CMD=$lt_save_MAGIC_CMD
;;
esac
fi
-MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
+MAGIC_CMD=$lt_cv_path_MAGIC_CMD
if test -n "$MAGIC_CMD"; then
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $MAGIC_CMD" >&5
$as_echo "$MAGIC_CMD" >&6; }
@@ -8259,7 +9216,7 @@
# Use C for the default configuration in the libtool script
-lt_save_CC="$CC"
+lt_save_CC=$CC
ac_ext=c
ac_cpp='$CPP $CPPFLAGS'
ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
@@ -8321,8 +9278,13 @@
lt_prog_compiler_no_builtin_flag=
-if test "$GCC" = yes; then
- lt_prog_compiler_no_builtin_flag=' -fno-builtin'
+if test yes = "$GCC"; then
+ case $cc_basename in
+ nvcc*)
+ lt_prog_compiler_no_builtin_flag=' -Xcompiler -fno-builtin' ;;
+ *)
+ lt_prog_compiler_no_builtin_flag=' -fno-builtin' ;;
+ esac
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler supports -fno-rtti -fno-exceptions" >&5
$as_echo_n "checking if $compiler supports -fno-rtti -fno-exceptions... " >&6; }
@@ -8332,7 +9294,7 @@
lt_cv_prog_compiler_rtti_exceptions=no
ac_outfile=conftest.$ac_objext
echo "$lt_simple_compile_test_code" > conftest.$ac_ext
- lt_compiler_flag="-fno-rtti -fno-exceptions"
+ lt_compiler_flag="-fno-rtti -fno-exceptions" ## exclude from sc_useless_quotes_in_assignment
# Insert the option either (1) after the last *FLAGS variable, or
# (2) before a word containing "conftest.", or (3) at the end.
# Note that $ac_compile itself does not contain backslashes and begins
@@ -8342,15 +9304,15 @@
-e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
-e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
-e 's:$: $lt_compiler_flag:'`
- (eval echo "\"\$as_me:8345: $lt_compile\"" >&5)
+ (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&5)
(eval "$lt_compile" 2>conftest.err)
ac_status=$?
cat conftest.err >&5
- echo "$as_me:8349: \$? = $ac_status" >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
if (exit $ac_status) && test -s "$ac_outfile"; then
# The compiler can only warn and ignore the option if not recognized
# So say no if there are warnings other than the usual output.
- $ECHO "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' >conftest.exp
+ $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' >conftest.exp
$SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then
lt_cv_prog_compiler_rtti_exceptions=yes
@@ -8362,7 +9324,7 @@
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_rtti_exceptions" >&5
$as_echo "$lt_cv_prog_compiler_rtti_exceptions" >&6; }
-if test x"$lt_cv_prog_compiler_rtti_exceptions" = xyes; then
+if test yes = "$lt_cv_prog_compiler_rtti_exceptions"; then
lt_prog_compiler_no_builtin_flag="$lt_prog_compiler_no_builtin_flag -fno-rtti -fno-exceptions"
else
:
@@ -8379,10 +9341,8 @@
lt_prog_compiler_pic=
lt_prog_compiler_static=
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $compiler option to produce PIC" >&5
-$as_echo_n "checking for $compiler option to produce PIC... " >&6; }
- if test "$GCC" = yes; then
+ if test yes = "$GCC"; then
lt_prog_compiler_wl='-Wl,'
lt_prog_compiler_static='-static'
@@ -8389,10 +9349,11 @@
case $host_os in
aix*)
# All AIX code is PIC.
- if test "$host_cpu" = ia64; then
+ if test ia64 = "$host_cpu"; then
# AIX 5 now supports IA64 processor
lt_prog_compiler_static='-Bstatic'
fi
+ lt_prog_compiler_pic='-fPIC'
;;
amigaos*)
@@ -8403,8 +9364,8 @@
;;
m68k)
# FIXME: we need at least 68020 code to build shared libraries, but
- # adding the `-m68020' flag to GCC prevents building anything better,
- # like `-m68040'.
+ # adding the '-m68020' flag to GCC prevents building anything better,
+ # like '-m68040'.
lt_prog_compiler_pic='-m68020 -resident32 -malways-restore-a4'
;;
esac
@@ -8420,6 +9381,11 @@
# Although the cygwin gcc ignores -fPIC, still need this for old-style
# (--disable-auto-import) libraries
lt_prog_compiler_pic='-DDLL_EXPORT'
+ case $host_os in
+ os2*)
+ lt_prog_compiler_static='$wl-static'
+ ;;
+ esac
;;
darwin* | rhapsody*)
@@ -8428,6 +9394,12 @@
lt_prog_compiler_pic='-fno-common'
;;
+ haiku*)
+ # PIC is the default for Haiku.
+ # The "-static" flag exists, but is broken.
+ lt_prog_compiler_static=
+ ;;
+
hpux*)
# PIC is the default for 64-bit PA HP-UX, but not for 32-bit
# PA HP-UX. On IA64 HP-UX, PIC is the default but the pic flag
@@ -8470,12 +9442,21 @@
lt_prog_compiler_pic='-fPIC'
;;
esac
+
+ case $cc_basename in
+ nvcc*) # Cuda Compiler Driver 2.2
+ lt_prog_compiler_wl='-Xlinker '
+ if test -n "$lt_prog_compiler_pic"; then
+ lt_prog_compiler_pic="-Xcompiler $lt_prog_compiler_pic"
+ fi
+ ;;
+ esac
else
# PORTME Check for flag to pass linker flags through the system compiler.
case $host_os in
aix*)
lt_prog_compiler_wl='-Wl,'
- if test "$host_cpu" = ia64; then
+ if test ia64 = "$host_cpu"; then
# AIX 5 now supports IA64 processor
lt_prog_compiler_static='-Bstatic'
else
@@ -8483,10 +9464,29 @@
fi
;;
+ darwin* | rhapsody*)
+ # PIC is the default on this platform
+ # Common symbols not allowed in MH_DYLIB files
+ lt_prog_compiler_pic='-fno-common'
+ case $cc_basename in
+ nagfor*)
+ # NAG Fortran compiler
+ lt_prog_compiler_wl='-Wl,-Wl,,'
+ lt_prog_compiler_pic='-PIC'
+ lt_prog_compiler_static='-Bstatic'
+ ;;
+ esac
+ ;;
+
mingw* | cygwin* | pw32* | os2* | cegcc*)
# This hack is so that the source file can tell whether it is being
# built for inclusion in a dll (and should export symbols for example).
lt_prog_compiler_pic='-DDLL_EXPORT'
+ case $host_os in
+ os2*)
+ lt_prog_compiler_static='$wl-static'
+ ;;
+ esac
;;
hpux9* | hpux10* | hpux11*)
@@ -8502,7 +9502,7 @@
;;
esac
# Is there a better lt_prog_compiler_static that works with the bundled CC?
- lt_prog_compiler_static='${wl}-a ${wl}archive'
+ lt_prog_compiler_static='$wl-a ${wl}archive'
;;
irix5* | irix6* | nonstopux*)
@@ -8511,9 +9511,9 @@
lt_prog_compiler_static='-non_shared'
;;
- linux* | k*bsd*-gnu)
+ linux* | k*bsd*-gnu | kopensolaris*-gnu | gnu*)
case $cc_basename in
- # old Intel for x86_64 which still supported -KPIC.
+ # old Intel for x86_64, which still supported -KPIC.
ecc*)
lt_prog_compiler_wl='-Wl,'
lt_prog_compiler_pic='-KPIC'
@@ -8532,7 +9532,19 @@
lt_prog_compiler_pic='--shared'
lt_prog_compiler_static='--static'
;;
- pgcc* | pgf77* | pgf90* | pgf95*)
+ nagfor*)
+ # NAG Fortran compiler
+ lt_prog_compiler_wl='-Wl,-Wl,,'
+ lt_prog_compiler_pic='-PIC'
+ lt_prog_compiler_static='-Bstatic'
+ ;;
+ tcc*)
+ # Fabrice Bellard et al's Tiny C Compiler
+ lt_prog_compiler_wl='-Wl,'
+ lt_prog_compiler_pic='-fPIC'
+ lt_prog_compiler_static='-static'
+ ;;
+ pgcc* | pgf77* | pgf90* | pgf95* | pgfortran*)
# Portland Group compilers (*not* the Pentium gcc compiler,
# which looks to be a dead project)
lt_prog_compiler_wl='-Wl,'
@@ -8544,8 +9556,8 @@
# All Alpha code is PIC.
lt_prog_compiler_static='-non_shared'
;;
- xl*)
- # IBM XL C 8.0/Fortran 10.1 on PPC
+ xl* | bgxl* | bgf* | mpixl*)
+ # IBM XL C 8.0/Fortran 10.1, 11.1 on PPC and BlueGene
lt_prog_compiler_wl='-Wl,'
lt_prog_compiler_pic='-qpic'
lt_prog_compiler_static='-qstaticlink'
@@ -8552,6 +9564,17 @@
;;
*)
case `$CC -V 2>&1 | sed 5q` in
+ *Sun\ Ceres\ Fortran* | *Sun*Fortran*\ [1-7].* | *Sun*Fortran*\ 8.[0-3]*)
+ # Sun Fortran 8.3 passes all unrecognized flags to the linker
+ lt_prog_compiler_pic='-KPIC'
+ lt_prog_compiler_static='-Bstatic'
+ lt_prog_compiler_wl=''
+ ;;
+ *Sun\ F* | *Sun*Fortran*)
+ lt_prog_compiler_pic='-KPIC'
+ lt_prog_compiler_static='-Bstatic'
+ lt_prog_compiler_wl='-Qoption ld '
+ ;;
*Sun\ C*)
# Sun C 5.9
lt_prog_compiler_pic='-KPIC'
@@ -8558,11 +9581,15 @@
lt_prog_compiler_static='-Bstatic'
lt_prog_compiler_wl='-Wl,'
;;
- *Sun\ F*)
- # Sun Fortran 8.3 passes all unrecognized flags to the linker
- lt_prog_compiler_pic='-KPIC'
+ *Intel*\ [CF]*Compiler*)
+ lt_prog_compiler_wl='-Wl,'
+ lt_prog_compiler_pic='-fPIC'
+ lt_prog_compiler_static='-static'
+ ;;
+ *Portland\ Group*)
+ lt_prog_compiler_wl='-Wl,'
+ lt_prog_compiler_pic='-fpic'
lt_prog_compiler_static='-Bstatic'
- lt_prog_compiler_wl=''
;;
esac
;;
@@ -8594,7 +9621,7 @@
lt_prog_compiler_pic='-KPIC'
lt_prog_compiler_static='-Bstatic'
case $cc_basename in
- f77* | f90* | f95*)
+ f77* | f90* | f95* | sunf77* | sunf90* | sunf95*)
lt_prog_compiler_wl='-Qoption ld ';;
*)
lt_prog_compiler_wl='-Wl,';;
@@ -8614,7 +9641,7 @@
;;
sysv4*MP*)
- if test -d /usr/nec ;then
+ if test -d /usr/nec; then
lt_prog_compiler_pic='-Kconform_pic'
lt_prog_compiler_static='-Bstatic'
fi
@@ -8643,7 +9670,7 @@
fi
case $host_os in
- # For platforms which do not support PIC, -DPIC is meaningless:
+ # For platforms that do not support PIC, -DPIC is meaningless:
*djgpp*)
lt_prog_compiler_pic=
;;
@@ -8651,14 +9678,18 @@
lt_prog_compiler_pic="$lt_prog_compiler_pic -DPIC"
;;
esac
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_prog_compiler_pic" >&5
-$as_echo "$lt_prog_compiler_pic" >&6; }
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $compiler option to produce PIC" >&5
+$as_echo_n "checking for $compiler option to produce PIC... " >&6; }
+if ${lt_cv_prog_compiler_pic+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ lt_cv_prog_compiler_pic=$lt_prog_compiler_pic
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_pic" >&5
+$as_echo "$lt_cv_prog_compiler_pic" >&6; }
+lt_prog_compiler_pic=$lt_cv_prog_compiler_pic
-
-
-
-
#
# Check to make sure the PIC flag actually works.
#
@@ -8671,7 +9702,7 @@
lt_cv_prog_compiler_pic_works=no
ac_outfile=conftest.$ac_objext
echo "$lt_simple_compile_test_code" > conftest.$ac_ext
- lt_compiler_flag="$lt_prog_compiler_pic -DPIC"
+ lt_compiler_flag="$lt_prog_compiler_pic -DPIC" ## exclude from sc_useless_quotes_in_assignment
# Insert the option either (1) after the last *FLAGS variable, or
# (2) before a word containing "conftest.", or (3) at the end.
# Note that $ac_compile itself does not contain backslashes and begins
@@ -8681,15 +9712,15 @@
-e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
-e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
-e 's:$: $lt_compiler_flag:'`
- (eval echo "\"\$as_me:8684: $lt_compile\"" >&5)
+ (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&5)
(eval "$lt_compile" 2>conftest.err)
ac_status=$?
cat conftest.err >&5
- echo "$as_me:8688: \$? = $ac_status" >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
if (exit $ac_status) && test -s "$ac_outfile"; then
# The compiler can only warn and ignore the option if not recognized
# So say no if there are warnings other than the usual output.
- $ECHO "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' >conftest.exp
+ $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' >conftest.exp
$SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then
lt_cv_prog_compiler_pic_works=yes
@@ -8701,7 +9732,7 @@
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_pic_works" >&5
$as_echo "$lt_cv_prog_compiler_pic_works" >&6; }
-if test x"$lt_cv_prog_compiler_pic_works" = xyes; then
+if test yes = "$lt_cv_prog_compiler_pic_works"; then
case $lt_prog_compiler_pic in
"" | " "*) ;;
*) lt_prog_compiler_pic=" $lt_prog_compiler_pic" ;;
@@ -8718,6 +9749,11 @@
+
+
+
+
+
#
# Check to make sure the static flag actually works.
#
@@ -8728,7 +9764,7 @@
$as_echo_n "(cached) " >&6
else
lt_cv_prog_compiler_static_works=no
- save_LDFLAGS="$LDFLAGS"
+ save_LDFLAGS=$LDFLAGS
LDFLAGS="$LDFLAGS $lt_tmp_static_flag"
echo "$lt_simple_link_test_code" > conftest.$ac_ext
if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then
@@ -8737,7 +9773,7 @@
if test -s conftest.err; then
# Append any errors to the config.log.
cat conftest.err 1>&5
- $ECHO "X$_lt_linker_boilerplate" | $Xsed -e '/^$/d' > conftest.exp
+ $ECHO "$_lt_linker_boilerplate" | $SED '/^$/d' > conftest.exp
$SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
if diff conftest.exp conftest.er2 >/dev/null; then
lt_cv_prog_compiler_static_works=yes
@@ -8747,13 +9783,13 @@
fi
fi
$RM -r conftest*
- LDFLAGS="$save_LDFLAGS"
+ LDFLAGS=$save_LDFLAGS
fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_static_works" >&5
$as_echo "$lt_cv_prog_compiler_static_works" >&6; }
-if test x"$lt_cv_prog_compiler_static_works" = xyes; then
+if test yes = "$lt_cv_prog_compiler_static_works"; then
:
else
lt_prog_compiler_static=
@@ -8786,16 +9822,16 @@
-e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
-e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
-e 's:$: $lt_compiler_flag:'`
- (eval echo "\"\$as_me:8789: $lt_compile\"" >&5)
+ (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&5)
(eval "$lt_compile" 2>out/conftest.err)
ac_status=$?
cat out/conftest.err >&5
- echo "$as_me:8793: \$? = $ac_status" >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
if (exit $ac_status) && test -s out/conftest2.$ac_objext
then
# The compiler can only warn and ignore the option if not recognized
# So say no if there are warnings
- $ECHO "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' > out/conftest.exp
+ $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' > out/conftest.exp
$SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2
if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then
lt_cv_prog_compiler_c_o=yes
@@ -8841,16 +9877,16 @@
-e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
-e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
-e 's:$: $lt_compiler_flag:'`
- (eval echo "\"\$as_me:8844: $lt_compile\"" >&5)
+ (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&5)
(eval "$lt_compile" 2>out/conftest.err)
ac_status=$?
cat out/conftest.err >&5
- echo "$as_me:8848: \$? = $ac_status" >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
if (exit $ac_status) && test -s out/conftest2.$ac_objext
then
# The compiler can only warn and ignore the option if not recognized
# So say no if there are warnings
- $ECHO "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' > out/conftest.exp
+ $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' > out/conftest.exp
$SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2
if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then
lt_cv_prog_compiler_c_o=yes
@@ -8873,8 +9909,8 @@
-hard_links="nottested"
-if test "$lt_cv_prog_compiler_c_o" = no && test "$need_locks" != no; then
+hard_links=nottested
+if test no = "$lt_cv_prog_compiler_c_o" && test no != "$need_locks"; then
# do not overwrite the value of need_locks provided by the user
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if we can lock with hard links" >&5
$as_echo_n "checking if we can lock with hard links... " >&6; }
@@ -8886,9 +9922,9 @@
ln conftest.a conftest.b 2>/dev/null && hard_links=no
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $hard_links" >&5
$as_echo "$hard_links" >&6; }
- if test "$hard_links" = no; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&5
-$as_echo "$as_me: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&2;}
+ if test no = "$hard_links"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: '$CC' does not support '-c -o', so 'make -j' may be unsafe" >&5
+$as_echo "$as_me: WARNING: '$CC' does not support '-c -o', so 'make -j' may be unsafe" >&2;}
need_locks=warn
fi
else
@@ -8916,7 +9952,6 @@
hardcode_direct=no
hardcode_direct_absolute=no
hardcode_libdir_flag_spec=
- hardcode_libdir_flag_spec_ld=
hardcode_libdir_separator=
hardcode_minus_L=no
hardcode_shlibpath_var=unsupported
@@ -8932,9 +9967,9 @@
# included in the symbol list
include_expsyms=
# exclude_expsyms can be an extended regexp of symbols to exclude
- # it will be wrapped by ` (' and `)$', so one must not match beginning or
- # end of line. Example: `a|bc|.*d.*' will exclude the symbols `a' and `bc',
- # as well as any symbol that contains `d'.
+ # it will be wrapped by ' (' and ')$', so one must not match beginning or
+ # end of line. Example: 'a|bc|.*d.*' will exclude the symbols 'a' and 'bc',
+ # as well as any symbol that contains 'd'.
exclude_expsyms='_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*'
# Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out
# platforms (ab)use it in PIC code, but their linkers get confused if
@@ -8949,7 +9984,7 @@
# FIXME: the MSVC++ port hasn't been tested in a loooong time
# When not using gcc, we currently assume that we are using
# Microsoft Visual C++.
- if test "$GCC" != yes; then
+ if test yes != "$GCC"; then
with_gnu_ld=no
fi
;;
@@ -8957,30 +9992,57 @@
# we just hope/assume this is gcc and not c89 (= MSVC++)
with_gnu_ld=yes
;;
- openbsd*)
+ openbsd* | bitrig*)
with_gnu_ld=no
;;
esac
ld_shlibs=yes
- if test "$with_gnu_ld" = yes; then
+
+ # On some targets, GNU ld is compatible enough with the native linker
+ # that we're better off using the native interface for both.
+ lt_use_gnu_ld_interface=no
+ if test yes = "$with_gnu_ld"; then
+ case $host_os in
+ aix*)
+ # The AIX port of GNU ld has always aspired to compatibility
+ # with the native linker. However, as the warning in the GNU ld
+ # block says, versions before 2.19.5* couldn't really create working
+ # shared libraries, regardless of the interface used.
+ case `$LD -v 2>&1` in
+ *\ \(GNU\ Binutils\)\ 2.19.5*) ;;
+ *\ \(GNU\ Binutils\)\ 2.[2-9]*) ;;
+ *\ \(GNU\ Binutils\)\ [3-9]*) ;;
+ *)
+ lt_use_gnu_ld_interface=yes
+ ;;
+ esac
+ ;;
+ *)
+ lt_use_gnu_ld_interface=yes
+ ;;
+ esac
+ fi
+
+ if test yes = "$lt_use_gnu_ld_interface"; then
# If archive_cmds runs LD, not CC, wlarc should be empty
- wlarc='${wl}'
+ wlarc='$wl'
# Set some defaults for GNU ld with shared library support. These
# are reset later if shared libraries are not supported. Putting them
# here allows them to be overridden if necessary.
runpath_var=LD_RUN_PATH
- hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
- export_dynamic_flag_spec='${wl}--export-dynamic'
+ hardcode_libdir_flag_spec='$wl-rpath $wl$libdir'
+ export_dynamic_flag_spec='$wl--export-dynamic'
# ancient GNU ld didn't support --whole-archive et. al.
if $LD --help 2>&1 | $GREP 'no-whole-archive' > /dev/null; then
- whole_archive_flag_spec="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
+ whole_archive_flag_spec=$wlarc'--whole-archive$convenience '$wlarc'--no-whole-archive'
else
whole_archive_flag_spec=
fi
supports_anon_versioning=no
- case `$LD -v 2>&1` in
+ case `$LD -v | $SED -e 's/(^)\+)\s\+//' 2>&1` in
+ *GNU\ gold*) supports_anon_versioning=yes ;;
*\ [01].* | *\ 2.[0-9].* | *\ 2.10.*) ;; # catch versions < 2.11
*\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ...
*\ 2.11.92.0.12\ *) supports_anon_versioning=yes ;; # Mandrake 8.2 ...
@@ -8992,15 +10054,16 @@
case $host_os in
aix[3-9]*)
# On AIX/PPC, the GNU linker is very broken
- if test "$host_cpu" != ia64; then
+ if test ia64 != "$host_cpu"; then
ld_shlibs=no
cat <<_LT_EOF 1>&2
-*** Warning: the GNU linker, at least up to release 2.9.1, is reported
+*** Warning: the GNU linker, at least up to release 2.19, is reported
*** to be unable to reliably create shared libraries on AIX.
*** Therefore, libtool is disabling shared libraries support. If you
-*** really care for shared libraries, you may want to modify your PATH
-*** so that a non-GNU linker is found, and then restart.
+*** really care for shared libraries, you may want to install binutils
+*** 2.20 or above, or modify your PATH so that a non-GNU linker is found.
+*** You will then need to restart the configuration process.
_LT_EOF
fi
@@ -9010,7 +10073,7 @@
case $host_cpu in
powerpc)
# see comment about AmigaOS4 .so support
- archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+ archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib'
archive_expsym_cmds=''
;;
m68k)
@@ -9026,7 +10089,7 @@
allow_undefined_flag=unsupported
# Joseph Beckenbach <jrb3 at best.com> says some releases of gcc
# support --undefined. This deserves some investigation. FIXME
- archive_cmds='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+ archive_cmds='$CC -nostart $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib'
else
ld_shlibs=no
fi
@@ -9036,32 +10099,67 @@
# _LT_TAGVAR(hardcode_libdir_flag_spec, ) is actually meaningless,
# as there is no search path for DLLs.
hardcode_libdir_flag_spec='-L$libdir'
+ export_dynamic_flag_spec='$wl--export-all-symbols'
allow_undefined_flag=unsupported
always_export_symbols=no
enable_shared_with_static_runtimes=yes
- export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGRS][ ]/s/.*[ ]\([^ ]*\)/\1 DATA/'\'' | $SED -e '\''/^[AITW][ ]/s/.*[ ]//'\'' | sort | uniq > $export_symbols'
+ export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGRS][ ]/s/.*[ ]\([^ ]*\)/\1 DATA/;s/^.*[ ]__nm__\([^ ]*\)[ ][^ ]*/\1 DATA/;/^I[ ]/d;/^[AITW][ ]/s/.* //'\'' | sort | uniq > $export_symbols'
+ exclude_expsyms='[_]+GLOBAL_OFFSET_TABLE_|[_]+GLOBAL__[FID]_.*|[_]+head_[A-Za-z0-9_]+_dll|[A-Za-z0-9_]+_dll_iname'
if $LD --help 2>&1 | $GREP 'auto-import' > /dev/null; then
- archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
- # If the export-symbols file already is a .def file (1st line
- # is EXPORTS), use it as is; otherwise, prepend...
- archive_expsym_cmds='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
- cp $export_symbols $output_objdir/$soname.def;
- else
- echo EXPORTS > $output_objdir/$soname.def;
- cat $export_symbols >> $output_objdir/$soname.def;
- fi~
- $CC -shared $output_objdir/$soname.def $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
+ archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname $wl--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
+ # If the export-symbols file already is a .def file, use it as
+ # is; otherwise, prepend EXPORTS...
+ archive_expsym_cmds='if test DEF = "`$SED -n -e '\''s/^[ ]*//'\'' -e '\''/^\(;.*\)*$/d'\'' -e '\''s/^\(EXPORTS\|LIBRARY\)\([ ].*\)*$/DEF/p'\'' -e q $export_symbols`" ; then
+ cp $export_symbols $output_objdir/$soname.def;
+ else
+ echo EXPORTS > $output_objdir/$soname.def;
+ cat $export_symbols >> $output_objdir/$soname.def;
+ fi~
+ $CC -shared $output_objdir/$soname.def $libobjs $deplibs $compiler_flags -o $output_objdir/$soname $wl--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
else
ld_shlibs=no
fi
;;
+ haiku*)
+ archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib'
+ link_all_deplibs=yes
+ ;;
+
+ os2*)
+ hardcode_libdir_flag_spec='-L$libdir'
+ hardcode_minus_L=yes
+ allow_undefined_flag=unsupported
+ shrext_cmds=.dll
+ archive_cmds='$ECHO "LIBRARY ${soname%$shared_ext} INITINSTANCE TERMINSTANCE" > $output_objdir/$libname.def~
+ $ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~
+ $ECHO "DATA MULTIPLE NONSHARED" >> $output_objdir/$libname.def~
+ $ECHO EXPORTS >> $output_objdir/$libname.def~
+ emxexp $libobjs | $SED /"_DLL_InitTerm"/d >> $output_objdir/$libname.def~
+ $CC -Zdll -Zcrtdll -o $output_objdir/$soname $libobjs $deplibs $compiler_flags $output_objdir/$libname.def~
+ emximp -o $lib $output_objdir/$libname.def'
+ archive_expsym_cmds='$ECHO "LIBRARY ${soname%$shared_ext} INITINSTANCE TERMINSTANCE" > $output_objdir/$libname.def~
+ $ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~
+ $ECHO "DATA MULTIPLE NONSHARED" >> $output_objdir/$libname.def~
+ $ECHO EXPORTS >> $output_objdir/$libname.def~
+ prefix_cmds="$SED"~
+ if test EXPORTS = "`$SED 1q $export_symbols`"; then
+ prefix_cmds="$prefix_cmds -e 1d";
+ fi~
+ prefix_cmds="$prefix_cmds -e \"s/^\(.*\)$/_\1/g\""~
+ cat $export_symbols | $prefix_cmds >> $output_objdir/$libname.def~
+ $CC -Zdll -Zcrtdll -o $output_objdir/$soname $libobjs $deplibs $compiler_flags $output_objdir/$libname.def~
+ emximp -o $lib $output_objdir/$libname.def'
+ old_archive_From_new_cmds='emximp -o $output_objdir/${libname}_dll.a $output_objdir/$libname.def'
+ enable_shared_with_static_runtimes=yes
+ ;;
+
interix[3-9]*)
hardcode_direct=no
hardcode_shlibpath_var=no
- hardcode_libdir_flag_spec='${wl}-rpath,$libdir'
- export_dynamic_flag_spec='${wl}-E'
+ hardcode_libdir_flag_spec='$wl-rpath,$libdir'
+ export_dynamic_flag_spec='$wl-E'
# Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc.
# Instead, shared libraries are loaded at an image base (0x10000000 by
# default) and relocated if they conflict, which is a slow very memory
@@ -9068,29 +10166,30 @@
# consuming and fragmenting process. To avoid this, we pick a random,
# 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link
# time. Moving up from 0x10000000 also allows more sbrk(2) space.
- archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
- archive_expsym_cmds='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
+ archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-h,$soname $wl--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
+ archive_expsym_cmds='sed "s|^|_|" $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-h,$soname $wl--retain-symbols-file,$output_objdir/$soname.expsym $wl--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
;;
- gnu* | linux* | tpf* | k*bsd*-gnu)
+ gnu* | linux* | tpf* | k*bsd*-gnu | kopensolaris*-gnu)
tmp_diet=no
- if test "$host_os" = linux-dietlibc; then
+ if test linux-dietlibc = "$host_os"; then
case $cc_basename in
diet\ *) tmp_diet=yes;; # linux-dietlibc with static linking (!diet-dyn)
esac
fi
if $LD --help 2>&1 | $EGREP ': supported targets:.* elf' > /dev/null \
- && test "$tmp_diet" = no
+ && test no = "$tmp_diet"
then
- tmp_addflag=
+ tmp_addflag=' $pic_flag'
tmp_sharedflag='-shared'
case $cc_basename,$host_cpu in
pgcc*) # Portland Group C compiler
- whole_archive_flag_spec='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $ECHO \"$new_convenience\"` ${wl}--no-whole-archive'
+ whole_archive_flag_spec='$wl--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` $wl--no-whole-archive'
tmp_addflag=' $pic_flag'
;;
- pgf77* | pgf90* | pgf95*) # Portland Group f77 and f90 compilers
- whole_archive_flag_spec='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $ECHO \"$new_convenience\"` ${wl}--no-whole-archive'
+ pgf77* | pgf90* | pgf95* | pgfortran*)
+ # Portland Group f77 and f90 compilers
+ whole_archive_flag_spec='$wl--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` $wl--no-whole-archive'
tmp_addflag=' $pic_flag -Mnomain' ;;
ecc*,ia64* | icc*,ia64*) # Intel C compiler on ia64
tmp_addflag=' -i_dynamic' ;;
@@ -9101,39 +10200,47 @@
lf95*) # Lahey Fortran 8.1
whole_archive_flag_spec=
tmp_sharedflag='--shared' ;;
- xl[cC]*) # IBM XL C 8.0 on PPC (deal with xlf below)
+ nagfor*) # NAGFOR 5.3
+ tmp_sharedflag='-Wl,-shared' ;;
+ xl[cC]* | bgxl[cC]* | mpixl[cC]*) # IBM XL C 8.0 on PPC (deal with xlf below)
tmp_sharedflag='-qmkshrobj'
tmp_addflag= ;;
+ nvcc*) # Cuda Compiler Driver 2.2
+ whole_archive_flag_spec='$wl--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` $wl--no-whole-archive'
+ compiler_needs_object=yes
+ ;;
esac
case `$CC -V 2>&1 | sed 5q` in
*Sun\ C*) # Sun C 5.9
- whole_archive_flag_spec='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; $ECHO \"$new_convenience\"` ${wl}--no-whole-archive'
+ whole_archive_flag_spec='$wl--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` $wl--no-whole-archive'
compiler_needs_object=yes
tmp_sharedflag='-G' ;;
*Sun\ F*) # Sun Fortran 8.3
tmp_sharedflag='-G' ;;
esac
- archive_cmds='$CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+ archive_cmds='$CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib'
- if test "x$supports_anon_versioning" = xyes; then
+ if test yes = "$supports_anon_versioning"; then
archive_expsym_cmds='echo "{ global:" > $output_objdir/$libname.ver~
- cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
- echo "local: *; };" >> $output_objdir/$libname.ver~
- $CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib'
+ cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
+ echo "local: *; };" >> $output_objdir/$libname.ver~
+ $CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags $wl-soname $wl$soname $wl-version-script $wl$output_objdir/$libname.ver -o $lib'
fi
case $cc_basename in
- xlf*)
+ tcc*)
+ export_dynamic_flag_spec='-rdynamic'
+ ;;
+ xlf* | bgf* | bgxlf* | mpixlf*)
# IBM XL Fortran 10.1 on PPC cannot create shared libs itself
whole_archive_flag_spec='--whole-archive$convenience --no-whole-archive'
- hardcode_libdir_flag_spec=
- hardcode_libdir_flag_spec_ld='-rpath $libdir'
- archive_cmds='$LD -shared $libobjs $deplibs $compiler_flags -soname $soname -o $lib'
- if test "x$supports_anon_versioning" = xyes; then
+ hardcode_libdir_flag_spec='$wl-rpath $wl$libdir'
+ archive_cmds='$LD -shared $libobjs $deplibs $linker_flags -soname $soname -o $lib'
+ if test yes = "$supports_anon_versioning"; then
archive_expsym_cmds='echo "{ global:" > $output_objdir/$libname.ver~
- cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
- echo "local: *; };" >> $output_objdir/$libname.ver~
- $LD -shared $libobjs $deplibs $compiler_flags -soname $soname -version-script $output_objdir/$libname.ver -o $lib'
+ cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
+ echo "local: *; };" >> $output_objdir/$libname.ver~
+ $LD -shared $libobjs $deplibs $linker_flags -soname $soname -version-script $output_objdir/$libname.ver -o $lib'
fi
;;
esac
@@ -9147,8 +10254,8 @@
archive_cmds='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib'
wlarc=
else
- archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
- archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+ archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib'
+ archive_expsym_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname $wl-retain-symbols-file $wl$export_symbols -o $lib'
fi
;;
@@ -9166,8 +10273,8 @@
_LT_EOF
elif $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
- archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
- archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+ archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib'
+ archive_expsym_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname $wl-retain-symbols-file $wl$export_symbols -o $lib'
else
ld_shlibs=no
fi
@@ -9179,7 +10286,7 @@
ld_shlibs=no
cat <<_LT_EOF 1>&2
-*** Warning: Releases of the GNU linker prior to 2.16.91.0.3 can not
+*** Warning: Releases of the GNU linker prior to 2.16.91.0.3 cannot
*** reliably create shared libraries on SCO systems. Therefore, libtool
*** is disabling shared libraries support. We urge you to upgrade GNU
*** binutils to release 2.16.91.0.3 or newer. Another option is to modify
@@ -9194,9 +10301,9 @@
# DT_RUNPATH tag from executables and libraries. But doing so
# requires that you compile everything twice, which is a pain.
if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
- hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
- archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
- archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+ hardcode_libdir_flag_spec='$wl-rpath $wl$libdir'
+ archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib'
+ archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags $wl-soname $wl$soname $wl-retain-symbols-file $wl$export_symbols -o $lib'
else
ld_shlibs=no
fi
@@ -9213,8 +10320,8 @@
*)
if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
- archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
- archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+ archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib'
+ archive_expsym_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname $wl-retain-symbols-file $wl$export_symbols -o $lib'
else
ld_shlibs=no
fi
@@ -9221,7 +10328,7 @@
;;
esac
- if test "$ld_shlibs" = no; then
+ if test no = "$ld_shlibs"; then
runpath_var=
hardcode_libdir_flag_spec=
export_dynamic_flag_spec=
@@ -9237,7 +10344,7 @@
# Note: this linker hardcodes the directories in LIBPATH if there
# are no directories specified by -L.
hardcode_minus_L=yes
- if test "$GCC" = yes && test -z "$lt_prog_compiler_static"; then
+ if test yes = "$GCC" && test -z "$lt_prog_compiler_static"; then
# Neither direct hardcoding nor static linking is supported with a
# broken collect2.
hardcode_direct=unsupported
@@ -9245,32 +10352,57 @@
;;
aix[4-9]*)
- if test "$host_cpu" = ia64; then
+ if test ia64 = "$host_cpu"; then
# On IA64, the linker does run time linking by default, so we don't
# have to do anything special.
aix_use_runtimelinking=no
exp_sym_flag='-Bexport'
- no_entry_flag=""
+ no_entry_flag=
else
# If we're using GNU nm, then we don't want the "-C" option.
- # -C means demangle to AIX nm, but means don't demangle with GNU nm
+ # -C means demangle to GNU nm, but means don't demangle to AIX nm.
+ # Without the "-l" option, or with the "-B" option, AIX nm treats
+ # weak defined symbols like other global defined symbols, whereas
+ # GNU nm marks them as "W".
+ # While the 'weak' keyword is ignored in the Export File, we need
+ # it in the Import File for the 'aix-soname' feature, so we have
+ # to replace the "-B" option with "-P" for AIX nm.
if $NM -V 2>&1 | $GREP 'GNU' > /dev/null; then
- export_symbols_cmds='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && (substr(\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols'
+ export_symbols_cmds='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "W")) && (substr(\$ 3,1,1) != ".")) { if (\$ 2 == "W") { print \$ 3 " weak" } else { print \$ 3 } } }'\'' | sort -u > $export_symbols'
else
- export_symbols_cmds='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && (substr(\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols'
+ export_symbols_cmds='`func_echo_all $NM | $SED -e '\''s/B\([^B]*\)$/P\1/'\''` -PCpgl $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "W") || (\$ 2 == "V") || (\$ 2 == "Z")) && (substr(\$ 1,1,1) != ".")) { if ((\$ 2 == "W") || (\$ 2 == "V") || (\$ 2 == "Z")) { print \$ 1 " weak" } else { print \$ 1 } } }'\'' | sort -u > $export_symbols'
fi
aix_use_runtimelinking=no
# Test if we are trying to use run time linking or normal
# AIX style linking. If -brtl is somewhere in LDFLAGS, we
- # need to do runtime linking.
+ # have runtime linking enabled, and use it for executables.
+ # For shared libraries, we enable/disable runtime linking
+ # depending on the kind of the shared library created -
+ # when "with_aix_soname,aix_use_runtimelinking" is:
+ # "aix,no" lib.a(lib.so.V) shared, rtl:no, for executables
+ # "aix,yes" lib.so shared, rtl:yes, for executables
+ # lib.a static archive
+ # "both,no" lib.so.V(shr.o) shared, rtl:yes
+ # lib.a(lib.so.V) shared, rtl:no, for executables
+ # "both,yes" lib.so.V(shr.o) shared, rtl:yes, for executables
+ # lib.a(lib.so.V) shared, rtl:no
+ # "svr4,*" lib.so.V(shr.o) shared, rtl:yes, for executables
+ # lib.a static archive
case $host_os in aix4.[23]|aix4.[23].*|aix[5-9]*)
for ld_flag in $LDFLAGS; do
- if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl"); then
+ if (test x-brtl = "x$ld_flag" || test x-Wl,-brtl = "x$ld_flag"); then
aix_use_runtimelinking=yes
break
fi
done
+ if test svr4,no = "$with_aix_soname,$aix_use_runtimelinking"; then
+ # With aix-soname=svr4, we create the lib.so.V shared archives only,
+ # so we don't have lib.a shared libs to link our executables.
+ # We have to force runtime linking in this case.
+ aix_use_runtimelinking=yes
+ LDFLAGS="$LDFLAGS -Wl,-brtl"
+ fi
;;
esac
@@ -9289,13 +10421,21 @@
hardcode_direct_absolute=yes
hardcode_libdir_separator=':'
link_all_deplibs=yes
- file_list_spec='${wl}-f,'
+ file_list_spec='$wl-f,'
+ case $with_aix_soname,$aix_use_runtimelinking in
+ aix,*) ;; # traditional, no import file
+ svr4,* | *,yes) # use import file
+ # The Import File defines what to hardcode.
+ hardcode_direct=no
+ hardcode_direct_absolute=no
+ ;;
+ esac
- if test "$GCC" = yes; then
+ if test yes = "$GCC"; then
case $host_os in aix4.[012]|aix4.[012].*)
# We only want to do this on AIX 4.2 and lower, the check
# below for broken collect2 doesn't work under 4.3+
- collect2name=`${CC} -print-prog-name=collect2`
+ collect2name=`$CC -print-prog-name=collect2`
if test -f "$collect2name" &&
strings "$collect2name" | $GREP resolve_lib_name >/dev/null
then
@@ -9314,35 +10454,48 @@
;;
esac
shared_flag='-shared'
- if test "$aix_use_runtimelinking" = yes; then
- shared_flag="$shared_flag "'${wl}-G'
+ if test yes = "$aix_use_runtimelinking"; then
+ shared_flag="$shared_flag "'$wl-G'
fi
+ # Need to ensure runtime linking is disabled for the traditional
+ # shared library, or the linker may eventually find shared libraries
+ # /with/ Import File - we do not want to mix them.
+ shared_flag_aix='-shared'
+ shared_flag_svr4='-shared $wl-G'
else
# not using gcc
- if test "$host_cpu" = ia64; then
+ if test ia64 = "$host_cpu"; then
# VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release
# chokes on -Wl,-G. The following line is correct:
shared_flag='-G'
else
- if test "$aix_use_runtimelinking" = yes; then
- shared_flag='${wl}-G'
+ if test yes = "$aix_use_runtimelinking"; then
+ shared_flag='$wl-G'
else
- shared_flag='${wl}-bM:SRE'
+ shared_flag='$wl-bM:SRE'
fi
+ shared_flag_aix='$wl-bM:SRE'
+ shared_flag_svr4='$wl-G'
fi
fi
- export_dynamic_flag_spec='${wl}-bexpall'
+ export_dynamic_flag_spec='$wl-bexpall'
# It seems that -bexpall does not export symbols beginning with
# underscore (_), so it is better to generate a list of symbols to export.
always_export_symbols=yes
- if test "$aix_use_runtimelinking" = yes; then
+ if test aix,yes = "$with_aix_soname,$aix_use_runtimelinking"; then
# Warning - without using the other runtime loading flags (-brtl),
# -berok will link without error, but may produce a broken library.
allow_undefined_flag='-berok'
# Determine the default libpath from the value encoded in an
# empty executable.
- cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+ if test set = "${lt_cv_aix_libpath+set}"; then
+ aix_libpath=$lt_cv_aix_libpath
+else
+ if ${lt_cv_aix_libpath_+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
/* end confdefs.h. */
int
@@ -9355,34 +10508,47 @@
_ACEOF
if ac_fn_c_try_link "$LINENO"; then :
-lt_aix_libpath_sed='
- /Import File Strings/,/^$/ {
- /^0/ {
- s/^0 *\(.*\)$/\1/
- p
- }
- }'
-aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
-# Check for a 64-bit object if we didn't find anything.
-if test -z "$aix_libpath"; then
- aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
+ lt_aix_libpath_sed='
+ /Import File Strings/,/^$/ {
+ /^0/ {
+ s/^0 *\([^ ]*\) *$/\1/
+ p
+ }
+ }'
+ lt_cv_aix_libpath_=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
+ # Check for a 64-bit object if we didn't find anything.
+ if test -z "$lt_cv_aix_libpath_"; then
+ lt_cv_aix_libpath_=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
+ fi
fi
-fi
rm -f core conftest.err conftest.$ac_objext \
conftest$ac_exeext conftest.$ac_ext
-if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
+ if test -z "$lt_cv_aix_libpath_"; then
+ lt_cv_aix_libpath_=/usr/lib:/lib
+ fi
- hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:'"$aix_libpath"
- archive_expsym_cmds='$CC -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then $ECHO "X${wl}${allow_undefined_flag}" | $Xsed; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag"
+fi
+
+ aix_libpath=$lt_cv_aix_libpath_
+fi
+
+ hardcode_libdir_flag_spec='$wl-blibpath:$libdir:'"$aix_libpath"
+ archive_expsym_cmds='$CC -o $output_objdir/$soname $libobjs $deplibs $wl'$no_entry_flag' $compiler_flags `if test -n "$allow_undefined_flag"; then func_echo_all "$wl$allow_undefined_flag"; else :; fi` $wl'$exp_sym_flag:\$export_symbols' '$shared_flag
else
- if test "$host_cpu" = ia64; then
- hardcode_libdir_flag_spec='${wl}-R $libdir:/usr/lib:/lib'
+ if test ia64 = "$host_cpu"; then
+ hardcode_libdir_flag_spec='$wl-R $libdir:/usr/lib:/lib'
allow_undefined_flag="-z nodefs"
- archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols"
+ archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\$wl$no_entry_flag"' $compiler_flags $wl$allow_undefined_flag '"\$wl$exp_sym_flag:\$export_symbols"
else
# Determine the default libpath from the value encoded in an
# empty executable.
- cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+ if test set = "${lt_cv_aix_libpath+set}"; then
+ aix_libpath=$lt_cv_aix_libpath
+else
+ if ${lt_cv_aix_libpath_+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
/* end confdefs.h. */
int
@@ -9395,33 +10561,57 @@
_ACEOF
if ac_fn_c_try_link "$LINENO"; then :
-lt_aix_libpath_sed='
- /Import File Strings/,/^$/ {
- /^0/ {
- s/^0 *\(.*\)$/\1/
- p
- }
- }'
-aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
-# Check for a 64-bit object if we didn't find anything.
-if test -z "$aix_libpath"; then
- aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
+ lt_aix_libpath_sed='
+ /Import File Strings/,/^$/ {
+ /^0/ {
+ s/^0 *\([^ ]*\) *$/\1/
+ p
+ }
+ }'
+ lt_cv_aix_libpath_=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
+ # Check for a 64-bit object if we didn't find anything.
+ if test -z "$lt_cv_aix_libpath_"; then
+ lt_cv_aix_libpath_=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
+ fi
fi
-fi
rm -f core conftest.err conftest.$ac_objext \
conftest$ac_exeext conftest.$ac_ext
-if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
+ if test -z "$lt_cv_aix_libpath_"; then
+ lt_cv_aix_libpath_=/usr/lib:/lib
+ fi
- hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:'"$aix_libpath"
+fi
+
+ aix_libpath=$lt_cv_aix_libpath_
+fi
+
+ hardcode_libdir_flag_spec='$wl-blibpath:$libdir:'"$aix_libpath"
# Warning - without using the other run time loading flags,
# -berok will link without error, but may produce a broken library.
- no_undefined_flag=' ${wl}-bernotok'
- allow_undefined_flag=' ${wl}-berok'
- # Exported symbols can be pulled into shared objects from archives
- whole_archive_flag_spec='$convenience'
+ no_undefined_flag=' $wl-bernotok'
+ allow_undefined_flag=' $wl-berok'
+ if test yes = "$with_gnu_ld"; then
+ # We only use this code for GNU lds that support --whole-archive.
+ whole_archive_flag_spec='$wl--whole-archive$convenience $wl--no-whole-archive'
+ else
+ # Exported symbols can be pulled into shared objects from archives
+ whole_archive_flag_spec='$convenience'
+ fi
archive_cmds_need_lc=yes
- # This is similar to how AIX traditionally builds its shared libraries.
- archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname'
+ archive_expsym_cmds='$RM -r $output_objdir/$realname.d~$MKDIR $output_objdir/$realname.d'
+ # -brtl affects multiple linker settings, -berok does not and is overridden later
+ compiler_flags_filtered='`func_echo_all "$compiler_flags " | $SED -e "s%-brtl\\([, ]\\)%-berok\\1%g"`'
+ if test svr4 != "$with_aix_soname"; then
+ # This is similar to how AIX traditionally builds its shared libraries.
+ archive_expsym_cmds="$archive_expsym_cmds"'~$CC '$shared_flag_aix' -o $output_objdir/$realname.d/$soname $libobjs $deplibs $wl-bnoentry '$compiler_flags_filtered'$wl-bE:$export_symbols$allow_undefined_flag~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$realname.d/$soname'
+ fi
+ if test aix != "$with_aix_soname"; then
+ archive_expsym_cmds="$archive_expsym_cmds"'~$CC '$shared_flag_svr4' -o $output_objdir/$realname.d/$shared_archive_member_spec.o $libobjs $deplibs $wl-bnoentry '$compiler_flags_filtered'$wl-bE:$export_symbols$allow_undefined_flag~$STRIP -e $output_objdir/$realname.d/$shared_archive_member_spec.o~( func_echo_all "#! $soname($shared_archive_member_spec.o)"; if test shr_64 = "$shared_archive_member_spec"; then func_echo_all "# 64"; else func_echo_all "# 32"; fi; cat $export_symbols ) > $output_objdir/$realname.d/$shared_archive_member_spec.imp~$AR $AR_FLAGS $output_objdir/$soname $output_objdir/$realname.d/$shared_archive_member_spec.o $output_objdir/$realname.d/$shared_archive_member_spec.imp'
+ else
+ # used by -dlpreopen to get the symbols
+ archive_expsym_cmds="$archive_expsym_cmds"'~$MV $output_objdir/$realname.d/$soname $output_objdir'
+ fi
+ archive_expsym_cmds="$archive_expsym_cmds"'~$RM -r $output_objdir/$realname.d'
fi
fi
;;
@@ -9430,7 +10620,7 @@
case $host_cpu in
powerpc)
# see comment about AmigaOS4 .so support
- archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+ archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib'
archive_expsym_cmds=''
;;
m68k)
@@ -9450,20 +10640,65 @@
# Microsoft Visual C++.
# hardcode_libdir_flag_spec is actually meaningless, as there is
# no search path for DLLs.
- hardcode_libdir_flag_spec=' '
- allow_undefined_flag=unsupported
- # Tell ltmain to make .lib files, not .a files.
- libext=lib
- # Tell ltmain to make .dll files, not .so files.
- shrext_cmds=".dll"
- # FIXME: Setting linknames here is a bad hack.
- archive_cmds='$CC -o $lib $libobjs $compiler_flags `$ECHO "X$deplibs" | $Xsed -e '\''s/ -lc$//'\''` -link -dll~linknames='
- # The linker will automatically build a .lib file if we build a DLL.
- old_archive_from_new_cmds='true'
- # FIXME: Should let the user specify the lib program.
- old_archive_cmds='lib -OUT:$oldlib$oldobjs$old_deplibs'
- fix_srcfile_path='`cygpath -w "$srcfile"`'
- enable_shared_with_static_runtimes=yes
+ case $cc_basename in
+ cl*)
+ # Native MSVC
+ hardcode_libdir_flag_spec=' '
+ allow_undefined_flag=unsupported
+ always_export_symbols=yes
+ file_list_spec='@'
+ # Tell ltmain to make .lib files, not .a files.
+ libext=lib
+ # Tell ltmain to make .dll files, not .so files.
+ shrext_cmds=.dll
+ # FIXME: Setting linknames here is a bad hack.
+ archive_cmds='$CC -o $output_objdir/$soname $libobjs $compiler_flags $deplibs -Wl,-DLL,-IMPLIB:"$tool_output_objdir$libname.dll.lib"~linknames='
+ archive_expsym_cmds='if test DEF = "`$SED -n -e '\''s/^[ ]*//'\'' -e '\''/^\(;.*\)*$/d'\'' -e '\''s/^\(EXPORTS\|LIBRARY\)\([ ].*\)*$/DEF/p'\'' -e q $export_symbols`" ; then
+ cp "$export_symbols" "$output_objdir/$soname.def";
+ echo "$tool_output_objdir$soname.def" > "$output_objdir/$soname.exp";
+ else
+ $SED -e '\''s/^/-link -EXPORT:/'\'' < $export_symbols > $output_objdir/$soname.exp;
+ fi~
+ $CC -o $tool_output_objdir$soname $libobjs $compiler_flags $deplibs "@$tool_output_objdir$soname.exp" -Wl,-DLL,-IMPLIB:"$tool_output_objdir$libname.dll.lib"~
+ linknames='
+ # The linker will not automatically build a static lib if we build a DLL.
+ # _LT_TAGVAR(old_archive_from_new_cmds, )='true'
+ enable_shared_with_static_runtimes=yes
+ exclude_expsyms='_NULL_IMPORT_DESCRIPTOR|_IMPORT_DESCRIPTOR_.*'
+ export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGRS][ ]/s/.*[ ]\([^ ]*\)/\1,DATA/'\'' | $SED -e '\''/^[AITW][ ]/s/.*[ ]//'\'' | sort | uniq > $export_symbols'
+ # Don't use ranlib
+ old_postinstall_cmds='chmod 644 $oldlib'
+ postlink_cmds='lt_outputfile="@OUTPUT@"~
+ lt_tool_outputfile="@TOOL_OUTPUT@"~
+ case $lt_outputfile in
+ *.exe|*.EXE) ;;
+ *)
+ lt_outputfile=$lt_outputfile.exe
+ lt_tool_outputfile=$lt_tool_outputfile.exe
+ ;;
+ esac~
+ if test : != "$MANIFEST_TOOL" && test -f "$lt_outputfile.manifest"; then
+ $MANIFEST_TOOL -manifest "$lt_tool_outputfile.manifest" -outputresource:"$lt_tool_outputfile" || exit 1;
+ $RM "$lt_outputfile.manifest";
+ fi'
+ ;;
+ *)
+ # Assume MSVC wrapper
+ hardcode_libdir_flag_spec=' '
+ allow_undefined_flag=unsupported
+ # Tell ltmain to make .lib files, not .a files.
+ libext=lib
+ # Tell ltmain to make .dll files, not .so files.
+ shrext_cmds=.dll
+ # FIXME: Setting linknames here is a bad hack.
+ archive_cmds='$CC -o $lib $libobjs $compiler_flags `func_echo_all "$deplibs" | $SED '\''s/ -lc$//'\''` -link -dll~linknames='
+ # The linker will automatically build a .lib file if we build a DLL.
+ old_archive_from_new_cmds='true'
+ # FIXME: Should let the user specify the lib program.
+ old_archive_cmds='lib -OUT:$oldlib$oldobjs$old_deplibs'
+ enable_shared_with_static_runtimes=yes
+ ;;
+ esac
;;
darwin* | rhapsody*)
@@ -9473,19 +10708,24 @@
hardcode_direct=no
hardcode_automatic=yes
hardcode_shlibpath_var=unsupported
- whole_archive_flag_spec=''
+ if test yes = "$lt_cv_ld_force_load"; then
+ whole_archive_flag_spec='`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience $wl-force_load,$conv\"; done; func_echo_all \"$new_convenience\"`'
+
+ else
+ whole_archive_flag_spec=''
+ fi
link_all_deplibs=yes
- allow_undefined_flag="$_lt_dar_allow_undefined"
+ allow_undefined_flag=$_lt_dar_allow_undefined
case $cc_basename in
- ifort*) _lt_dar_can_shared=yes ;;
+ ifort*|nagfor*) _lt_dar_can_shared=yes ;;
*) _lt_dar_can_shared=$GCC ;;
esac
- if test "$_lt_dar_can_shared" = "yes"; then
- output_verbose_link_cmd=echo
- archive_cmds="\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod${_lt_dsymutil}"
- module_cmds="\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dsymutil}"
- archive_expsym_cmds="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring ${_lt_dar_single_mod}${_lt_dar_export_syms}${_lt_dsymutil}"
- module_expsym_cmds="sed -e 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dar_export_syms}${_lt_dsymutil}"
+ if test yes = "$_lt_dar_can_shared"; then
+ output_verbose_link_cmd=func_echo_all
+ archive_cmds="\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod$_lt_dsymutil"
+ module_cmds="\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags$_lt_dsymutil"
+ archive_expsym_cmds="sed 's|^|_|' < \$export_symbols > \$output_objdir/\$libname-symbols.expsym~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod$_lt_dar_export_syms$_lt_dsymutil"
+ module_expsym_cmds="sed -e 's|^|_|' < \$export_symbols > \$output_objdir/\$libname-symbols.expsym~\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags$_lt_dar_export_syms$_lt_dsymutil"
else
ld_shlibs=no
@@ -9499,10 +10739,6 @@
hardcode_shlibpath_var=no
;;
- freebsd1*)
- ld_shlibs=no
- ;;
-
# FreeBSD 2.2.[012] allows us to include c++rt0.o to get C++ constructor
# support. Future versions do this automatically, but an explicit c++rt0.o
# does not break anything, and helps significantly (at the cost of a little
@@ -9515,7 +10751,7 @@
;;
# Unfortunately, older versions of FreeBSD 2 do not have this feature.
- freebsd2*)
+ freebsd2.*)
archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
hardcode_direct=yes
hardcode_minus_L=yes
@@ -9524,7 +10760,7 @@
# FreeBSD 3 and greater uses gcc -shared to do shared libraries.
freebsd* | dragonfly*)
- archive_cmds='$CC -shared -o $lib $libobjs $deplibs $compiler_flags'
+ archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
hardcode_libdir_flag_spec='-R$libdir'
hardcode_direct=yes
hardcode_shlibpath_var=no
@@ -9531,12 +10767,12 @@
;;
hpux9*)
- if test "$GCC" = yes; then
- archive_cmds='$RM $output_objdir/$soname~$CC -shared -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
+ if test yes = "$GCC"; then
+ archive_cmds='$RM $output_objdir/$soname~$CC -shared $pic_flag $wl+b $wl$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test "x$output_objdir/$soname" = "x$lib" || mv $output_objdir/$soname $lib'
else
- archive_cmds='$RM $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
+ archive_cmds='$RM $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test "x$output_objdir/$soname" = "x$lib" || mv $output_objdir/$soname $lib'
fi
- hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir'
+ hardcode_libdir_flag_spec='$wl+b $wl$libdir'
hardcode_libdir_separator=:
hardcode_direct=yes
@@ -9543,22 +10779,21 @@
# hardcode_minus_L: Not really in the search PATH,
# but as the default location of the library.
hardcode_minus_L=yes
- export_dynamic_flag_spec='${wl}-E'
+ export_dynamic_flag_spec='$wl-E'
;;
hpux10*)
- if test "$GCC" = yes -a "$with_gnu_ld" = no; then
- archive_cmds='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
+ if test yes,no = "$GCC,$with_gnu_ld"; then
+ archive_cmds='$CC -shared $pic_flag $wl+h $wl$soname $wl+b $wl$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
else
archive_cmds='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags'
fi
- if test "$with_gnu_ld" = no; then
- hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir'
- hardcode_libdir_flag_spec_ld='+b $libdir'
+ if test no = "$with_gnu_ld"; then
+ hardcode_libdir_flag_spec='$wl+b $wl$libdir'
hardcode_libdir_separator=:
hardcode_direct=yes
hardcode_direct_absolute=yes
- export_dynamic_flag_spec='${wl}-E'
+ export_dynamic_flag_spec='$wl-E'
# hardcode_minus_L: Not really in the search PATH,
# but as the default location of the library.
hardcode_minus_L=yes
@@ -9566,33 +10801,72 @@
;;
hpux11*)
- if test "$GCC" = yes -a "$with_gnu_ld" = no; then
+ if test yes,no = "$GCC,$with_gnu_ld"; then
case $host_cpu in
hppa*64*)
- archive_cmds='$CC -shared ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
+ archive_cmds='$CC -shared $wl+h $wl$soname -o $lib $libobjs $deplibs $compiler_flags'
;;
ia64*)
- archive_cmds='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
+ archive_cmds='$CC -shared $pic_flag $wl+h $wl$soname $wl+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
;;
*)
- archive_cmds='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
+ archive_cmds='$CC -shared $pic_flag $wl+h $wl$soname $wl+b $wl$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
;;
esac
else
case $host_cpu in
hppa*64*)
- archive_cmds='$CC -b ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
+ archive_cmds='$CC -b $wl+h $wl$soname -o $lib $libobjs $deplibs $compiler_flags'
;;
ia64*)
- archive_cmds='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
+ archive_cmds='$CC -b $wl+h $wl$soname $wl+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
;;
*)
- archive_cmds='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
+
+ # Older versions of the 11.00 compiler do not understand -b yet
+ # (HP92453-01 A.11.01.20 doesn't, HP92453-01 B.11.X.35175-35176.GP does)
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $CC understands -b" >&5
+$as_echo_n "checking if $CC understands -b... " >&6; }
+if ${lt_cv_prog_compiler__b+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ lt_cv_prog_compiler__b=no
+ save_LDFLAGS=$LDFLAGS
+ LDFLAGS="$LDFLAGS -b"
+ echo "$lt_simple_link_test_code" > conftest.$ac_ext
+ if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then
+ # The linker can only warn and ignore the option if not recognized
+ # So say no if there are warnings
+ if test -s conftest.err; then
+ # Append any errors to the config.log.
+ cat conftest.err 1>&5
+ $ECHO "$_lt_linker_boilerplate" | $SED '/^$/d' > conftest.exp
+ $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
+ if diff conftest.exp conftest.er2 >/dev/null; then
+ lt_cv_prog_compiler__b=yes
+ fi
+ else
+ lt_cv_prog_compiler__b=yes
+ fi
+ fi
+ $RM -r conftest*
+ LDFLAGS=$save_LDFLAGS
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler__b" >&5
+$as_echo "$lt_cv_prog_compiler__b" >&6; }
+
+if test yes = "$lt_cv_prog_compiler__b"; then
+ archive_cmds='$CC -b $wl+h $wl$soname $wl+b $wl$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
+else
+ archive_cmds='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags'
+fi
+
;;
esac
fi
- if test "$with_gnu_ld" = no; then
- hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir'
+ if test no = "$with_gnu_ld"; then
+ hardcode_libdir_flag_spec='$wl+b $wl$libdir'
hardcode_libdir_separator=:
case $host_cpu in
@@ -9603,7 +10877,7 @@
*)
hardcode_direct=yes
hardcode_direct_absolute=yes
- export_dynamic_flag_spec='${wl}-E'
+ export_dynamic_flag_spec='$wl-E'
# hardcode_minus_L: Not really in the search PATH,
# but as the default location of the library.
@@ -9614,35 +10888,58 @@
;;
irix5* | irix6* | nonstopux*)
- if test "$GCC" = yes; then
- archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+ if test yes = "$GCC"; then
+ archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname `test -n "$verstring" && func_echo_all "$wl-set_version $wl$verstring"` $wl-update_registry $wl$output_objdir/so_locations -o $lib'
# Try to use the -exported_symbol ld option, if it does not
# work, assume that -exports_file does not work either and
# implicitly export all symbols.
- save_LDFLAGS="$LDFLAGS"
- LDFLAGS="$LDFLAGS -shared ${wl}-exported_symbol ${wl}foo ${wl}-update_registry ${wl}/dev/null"
- cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+ # This should be the same for all languages, so no per-tag cache variable.
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the $host_os linker accepts -exported_symbol" >&5
+$as_echo_n "checking whether the $host_os linker accepts -exported_symbol... " >&6; }
+if ${lt_cv_irix_exported_symbol+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ save_LDFLAGS=$LDFLAGS
+ LDFLAGS="$LDFLAGS -shared $wl-exported_symbol ${wl}foo $wl-update_registry $wl/dev/null"
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
/* end confdefs.h. */
-int foo(void) {}
+int foo (void) { return 0; }
_ACEOF
if ac_fn_c_try_link "$LINENO"; then :
- archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations ${wl}-exports_file ${wl}$export_symbols -o $lib'
-
+ lt_cv_irix_exported_symbol=yes
+else
+ lt_cv_irix_exported_symbol=no
fi
rm -f core conftest.err conftest.$ac_objext \
conftest$ac_exeext conftest.$ac_ext
- LDFLAGS="$save_LDFLAGS"
+ LDFLAGS=$save_LDFLAGS
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_irix_exported_symbol" >&5
+$as_echo "$lt_cv_irix_exported_symbol" >&6; }
+ if test yes = "$lt_cv_irix_exported_symbol"; then
+ archive_expsym_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname `test -n "$verstring" && func_echo_all "$wl-set_version $wl$verstring"` $wl-update_registry $wl$output_objdir/so_locations $wl-exports_file $wl$export_symbols -o $lib'
+ fi
else
- archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib'
- archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -exports_file $export_symbols -o $lib'
+ archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry $output_objdir/so_locations -o $lib'
+ archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry $output_objdir/so_locations -exports_file $export_symbols -o $lib'
fi
archive_cmds_need_lc='no'
- hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
+ hardcode_libdir_flag_spec='$wl-rpath $wl$libdir'
hardcode_libdir_separator=:
inherit_rpath=yes
link_all_deplibs=yes
;;
+ linux*)
+ case $cc_basename in
+ tcc*)
+ # Fabrice Bellard et al's Tiny C Compiler
+ ld_shlibs=yes
+ archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
+ ;;
+ esac
+ ;;
+
netbsd*)
if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then
archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' # a.out
@@ -9657,7 +10954,7 @@
newsos6)
archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
hardcode_direct=yes
- hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
+ hardcode_libdir_flag_spec='$wl-rpath $wl$libdir'
hardcode_libdir_separator=:
hardcode_shlibpath_var=no
;;
@@ -9665,27 +10962,19 @@
*nto* | *qnx*)
;;
- openbsd*)
+ openbsd* | bitrig*)
if test -f /usr/libexec/ld.so; then
hardcode_direct=yes
hardcode_shlibpath_var=no
hardcode_direct_absolute=yes
- if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
+ if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`"; then
archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
- archive_expsym_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-retain-symbols-file,$export_symbols'
- hardcode_libdir_flag_spec='${wl}-rpath,$libdir'
- export_dynamic_flag_spec='${wl}-E'
+ archive_expsym_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags $wl-retain-symbols-file,$export_symbols'
+ hardcode_libdir_flag_spec='$wl-rpath,$libdir'
+ export_dynamic_flag_spec='$wl-E'
else
- case $host_os in
- openbsd[01].* | openbsd2.[0-7] | openbsd2.[0-7].*)
- archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
- hardcode_libdir_flag_spec='-R$libdir'
- ;;
- *)
- archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
- hardcode_libdir_flag_spec='${wl}-rpath,$libdir'
- ;;
- esac
+ archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
+ hardcode_libdir_flag_spec='$wl-rpath,$libdir'
fi
else
ld_shlibs=no
@@ -9696,33 +10985,53 @@
hardcode_libdir_flag_spec='-L$libdir'
hardcode_minus_L=yes
allow_undefined_flag=unsupported
- archive_cmds='$ECHO "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~$ECHO DATA >> $output_objdir/$libname.def~$ECHO " SINGLE NONSHARED" >> $output_objdir/$libname.def~$ECHO EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def'
- old_archive_from_new_cmds='emximp -o $output_objdir/$libname.a $output_objdir/$libname.def'
+ shrext_cmds=.dll
+ archive_cmds='$ECHO "LIBRARY ${soname%$shared_ext} INITINSTANCE TERMINSTANCE" > $output_objdir/$libname.def~
+ $ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~
+ $ECHO "DATA MULTIPLE NONSHARED" >> $output_objdir/$libname.def~
+ $ECHO EXPORTS >> $output_objdir/$libname.def~
+ emxexp $libobjs | $SED /"_DLL_InitTerm"/d >> $output_objdir/$libname.def~
+ $CC -Zdll -Zcrtdll -o $output_objdir/$soname $libobjs $deplibs $compiler_flags $output_objdir/$libname.def~
+ emximp -o $lib $output_objdir/$libname.def'
+ archive_expsym_cmds='$ECHO "LIBRARY ${soname%$shared_ext} INITINSTANCE TERMINSTANCE" > $output_objdir/$libname.def~
+ $ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~
+ $ECHO "DATA MULTIPLE NONSHARED" >> $output_objdir/$libname.def~
+ $ECHO EXPORTS >> $output_objdir/$libname.def~
+ prefix_cmds="$SED"~
+ if test EXPORTS = "`$SED 1q $export_symbols`"; then
+ prefix_cmds="$prefix_cmds -e 1d";
+ fi~
+ prefix_cmds="$prefix_cmds -e \"s/^\(.*\)$/_\1/g\""~
+ cat $export_symbols | $prefix_cmds >> $output_objdir/$libname.def~
+ $CC -Zdll -Zcrtdll -o $output_objdir/$soname $libobjs $deplibs $compiler_flags $output_objdir/$libname.def~
+ emximp -o $lib $output_objdir/$libname.def'
+ old_archive_From_new_cmds='emximp -o $output_objdir/${libname}_dll.a $output_objdir/$libname.def'
+ enable_shared_with_static_runtimes=yes
;;
osf3*)
- if test "$GCC" = yes; then
- allow_undefined_flag=' ${wl}-expect_unresolved ${wl}\*'
- archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+ if test yes = "$GCC"; then
+ allow_undefined_flag=' $wl-expect_unresolved $wl\*'
+ archive_cmds='$CC -shared$allow_undefined_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname `test -n "$verstring" && func_echo_all "$wl-set_version $wl$verstring"` $wl-update_registry $wl$output_objdir/so_locations -o $lib'
else
allow_undefined_flag=' -expect_unresolved \*'
- archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib'
+ archive_cmds='$CC -shared$allow_undefined_flag $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry $output_objdir/so_locations -o $lib'
fi
archive_cmds_need_lc='no'
- hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
+ hardcode_libdir_flag_spec='$wl-rpath $wl$libdir'
hardcode_libdir_separator=:
;;
osf4* | osf5*) # as osf3* with the addition of -msym flag
- if test "$GCC" = yes; then
- allow_undefined_flag=' ${wl}-expect_unresolved ${wl}\*'
- archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
- hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
+ if test yes = "$GCC"; then
+ allow_undefined_flag=' $wl-expect_unresolved $wl\*'
+ archive_cmds='$CC -shared$allow_undefined_flag $pic_flag $libobjs $deplibs $compiler_flags $wl-msym $wl-soname $wl$soname `test -n "$verstring" && func_echo_all "$wl-set_version $wl$verstring"` $wl-update_registry $wl$output_objdir/so_locations -o $lib'
+ hardcode_libdir_flag_spec='$wl-rpath $wl$libdir'
else
allow_undefined_flag=' -expect_unresolved \*'
- archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -msym -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib'
+ archive_cmds='$CC -shared$allow_undefined_flag $libobjs $deplibs $compiler_flags -msym -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry $output_objdir/so_locations -o $lib'
archive_expsym_cmds='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done; printf "%s\\n" "-hidden">> $lib.exp~
- $CC -shared${allow_undefined_flag} ${wl}-input ${wl}$lib.exp $compiler_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib~$RM $lib.exp'
+ $CC -shared$allow_undefined_flag $wl-input $wl$lib.exp $compiler_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && $ECHO "-set_version $verstring"` -update_registry $output_objdir/so_locations -o $lib~$RM $lib.exp'
# Both c and cxx compiler support -rpath directly
hardcode_libdir_flag_spec='-rpath $libdir'
@@ -9733,24 +11042,24 @@
solaris*)
no_undefined_flag=' -z defs'
- if test "$GCC" = yes; then
- wlarc='${wl}'
- archive_cmds='$CC -shared ${wl}-z ${wl}text ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
+ if test yes = "$GCC"; then
+ wlarc='$wl'
+ archive_cmds='$CC -shared $pic_flag $wl-z ${wl}text $wl-h $wl$soname -o $lib $libobjs $deplibs $compiler_flags'
archive_expsym_cmds='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
- $CC -shared ${wl}-z ${wl}text ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp'
+ $CC -shared $pic_flag $wl-z ${wl}text $wl-M $wl$lib.exp $wl-h $wl$soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp'
else
case `$CC -V 2>&1` in
*"Compilers 5.0"*)
wlarc=''
- archive_cmds='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags'
+ archive_cmds='$LD -G$allow_undefined_flag -h $soname -o $lib $libobjs $deplibs $linker_flags'
archive_expsym_cmds='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
- $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$RM $lib.exp'
+ $LD -G$allow_undefined_flag -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$RM $lib.exp'
;;
*)
- wlarc='${wl}'
- archive_cmds='$CC -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $compiler_flags'
+ wlarc='$wl'
+ archive_cmds='$CC -G$allow_undefined_flag -h $soname -o $lib $libobjs $deplibs $compiler_flags'
archive_expsym_cmds='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
- $CC -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp'
+ $CC -G$allow_undefined_flag -M $lib.exp -h $soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp'
;;
esac
fi
@@ -9760,11 +11069,11 @@
solaris2.[0-5] | solaris2.[0-5].*) ;;
*)
# The compiler driver will combine and reorder linker options,
- # but understands `-z linker_flag'. GCC discards it without `$wl',
+ # but understands '-z linker_flag'. GCC discards it without '$wl',
# but is careful enough not to reorder.
# Supported since Solaris 2.6 (maybe 2.5.1?)
- if test "$GCC" = yes; then
- whole_archive_flag_spec='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract'
+ if test yes = "$GCC"; then
+ whole_archive_flag_spec='$wl-z ${wl}allextract$convenience $wl-z ${wl}defaultextract'
else
whole_archive_flag_spec='-z allextract$convenience -z defaultextract'
fi
@@ -9774,10 +11083,10 @@
;;
sunos4*)
- if test "x$host_vendor" = xsequent; then
+ if test sequent = "$host_vendor"; then
# Use $CC to link under sequent, because it throws in some extra .o
# files that make .init and .fini sections work.
- archive_cmds='$CC -G ${wl}-h $soname -o $lib $libobjs $deplibs $compiler_flags'
+ archive_cmds='$CC -G $wl-h $soname -o $lib $libobjs $deplibs $compiler_flags'
else
archive_cmds='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags'
fi
@@ -9826,43 +11135,43 @@
;;
sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[01].[10]* | unixware7* | sco3.2v5.0.[024]*)
- no_undefined_flag='${wl}-z,text'
+ no_undefined_flag='$wl-z,text'
archive_cmds_need_lc=no
hardcode_shlibpath_var=no
runpath_var='LD_RUN_PATH'
- if test "$GCC" = yes; then
- archive_cmds='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
- archive_expsym_cmds='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ if test yes = "$GCC"; then
+ archive_cmds='$CC -shared $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ archive_expsym_cmds='$CC -shared $wl-Bexport:$export_symbols $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
else
- archive_cmds='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
- archive_expsym_cmds='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ archive_cmds='$CC -G $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ archive_expsym_cmds='$CC -G $wl-Bexport:$export_symbols $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
fi
;;
sysv5* | sco3.2v5* | sco5v6*)
- # Note: We can NOT use -z defs as we might desire, because we do not
+ # Note: We CANNOT use -z defs as we might desire, because we do not
# link with -lc, and that would cause any symbols used from libc to
# always be unresolved, which means just about no library would
# ever link correctly. If we're not using GNU ld we use -z text
# though, which does catch some bad symbols but isn't as heavy-handed
# as -z defs.
- no_undefined_flag='${wl}-z,text'
- allow_undefined_flag='${wl}-z,nodefs'
+ no_undefined_flag='$wl-z,text'
+ allow_undefined_flag='$wl-z,nodefs'
archive_cmds_need_lc=no
hardcode_shlibpath_var=no
- hardcode_libdir_flag_spec='${wl}-R,$libdir'
+ hardcode_libdir_flag_spec='$wl-R,$libdir'
hardcode_libdir_separator=':'
link_all_deplibs=yes
- export_dynamic_flag_spec='${wl}-Bexport'
+ export_dynamic_flag_spec='$wl-Bexport'
runpath_var='LD_RUN_PATH'
- if test "$GCC" = yes; then
- archive_cmds='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
- archive_expsym_cmds='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ if test yes = "$GCC"; then
+ archive_cmds='$CC -shared $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ archive_expsym_cmds='$CC -shared $wl-Bexport:$export_symbols $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
else
- archive_cmds='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
- archive_expsym_cmds='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ archive_cmds='$CC -G $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ archive_expsym_cmds='$CC -G $wl-Bexport:$export_symbols $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
fi
;;
@@ -9877,10 +11186,10 @@
;;
esac
- if test x$host_vendor = xsni; then
+ if test sni = "$host_vendor"; then
case $host in
sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*)
- export_dynamic_flag_spec='${wl}-Blargedynsym'
+ export_dynamic_flag_spec='$wl-Blargedynsym'
;;
esac
fi
@@ -9888,7 +11197,7 @@
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ld_shlibs" >&5
$as_echo "$ld_shlibs" >&6; }
-test "$ld_shlibs" = no && can_build_shared=no
+test no = "$ld_shlibs" && can_build_shared=no
with_gnu_ld=$with_gnu_ld
@@ -9914,7 +11223,7 @@
# Assume -lc should be added
archive_cmds_need_lc=yes
- if test "$enable_shared" = yes && test "$GCC" = yes; then
+ if test yes,yes = "$GCC,$enable_shared"; then
case $archive_cmds in
*'~'*)
# FIXME: we may have to deal with multi-command sequences.
@@ -9925,44 +11234,50 @@
# to ld, don't add -lc before -lgcc.
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether -lc should be explicitly linked in" >&5
$as_echo_n "checking whether -lc should be explicitly linked in... " >&6; }
- $RM conftest*
- echo "$lt_simple_compile_test_code" > conftest.$ac_ext
+if ${lt_cv_archive_cmds_need_lc+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ $RM conftest*
+ echo "$lt_simple_compile_test_code" > conftest.$ac_ext
- if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5
+ if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5
(eval $ac_compile) 2>&5
ac_status=$?
$as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
test $ac_status = 0; } 2>conftest.err; then
- soname=conftest
- lib=conftest
- libobjs=conftest.$ac_objext
- deplibs=
- wl=$lt_prog_compiler_wl
- pic_flag=$lt_prog_compiler_pic
- compiler_flags=-v
- linker_flags=-v
- verstring=
- output_objdir=.
- libname=conftest
- lt_save_allow_undefined_flag=$allow_undefined_flag
- allow_undefined_flag=
- if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$archive_cmds 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1\""; } >&5
+ soname=conftest
+ lib=conftest
+ libobjs=conftest.$ac_objext
+ deplibs=
+ wl=$lt_prog_compiler_wl
+ pic_flag=$lt_prog_compiler_pic
+ compiler_flags=-v
+ linker_flags=-v
+ verstring=
+ output_objdir=.
+ libname=conftest
+ lt_save_allow_undefined_flag=$allow_undefined_flag
+ allow_undefined_flag=
+ if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$archive_cmds 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1\""; } >&5
(eval $archive_cmds 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1) 2>&5
ac_status=$?
$as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
test $ac_status = 0; }
- then
- archive_cmds_need_lc=no
- else
- archive_cmds_need_lc=yes
- fi
- allow_undefined_flag=$lt_save_allow_undefined_flag
- else
- cat conftest.err 1>&5
- fi
- $RM conftest*
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $archive_cmds_need_lc" >&5
-$as_echo "$archive_cmds_need_lc" >&6; }
+ then
+ lt_cv_archive_cmds_need_lc=no
+ else
+ lt_cv_archive_cmds_need_lc=yes
+ fi
+ allow_undefined_flag=$lt_save_allow_undefined_flag
+ else
+ cat conftest.err 1>&5
+ fi
+ $RM conftest*
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_archive_cmds_need_lc" >&5
+$as_echo "$lt_cv_archive_cmds_need_lc" >&6; }
+ archive_cmds_need_lc=$lt_cv_archive_cmds_need_lc
;;
esac
fi
@@ -10120,45 +11435,54 @@
-
-
-
-
-
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking dynamic linker characteristics" >&5
$as_echo_n "checking dynamic linker characteristics... " >&6; }
-if test "$GCC" = yes; then
+if test yes = "$GCC"; then
case $host_os in
- darwin*) lt_awk_arg="/^libraries:/,/LR/" ;;
- *) lt_awk_arg="/^libraries:/" ;;
+ darwin*) lt_awk_arg='/^libraries:/,/LR/' ;;
+ *) lt_awk_arg='/^libraries:/' ;;
esac
- lt_search_path_spec=`$CC -print-search-dirs | awk $lt_awk_arg | $SED -e "s/^libraries://" -e "s,=/,/,g"`
- if $ECHO "$lt_search_path_spec" | $GREP ';' >/dev/null ; then
+ case $host_os in
+ mingw* | cegcc*) lt_sed_strip_eq='s|=\([A-Za-z]:\)|\1|g' ;;
+ *) lt_sed_strip_eq='s|=/|/|g' ;;
+ esac
+ lt_search_path_spec=`$CC -print-search-dirs | awk $lt_awk_arg | $SED -e "s/^libraries://" -e $lt_sed_strip_eq`
+ case $lt_search_path_spec in
+ *\;*)
# if the path contains ";" then we assume it to be the separator
# otherwise default to the standard path separator (i.e. ":") - it is
# assumed that no part of a normal pathname contains ";" but that should
# okay in the real world where ";" in dirpaths is itself problematic.
- lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED -e 's/;/ /g'`
- else
- lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"`
- fi
+ lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED 's/;/ /g'`
+ ;;
+ *)
+ lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED "s/$PATH_SEPARATOR/ /g"`
+ ;;
+ esac
# Ok, now we have the path, separated by spaces, we can step through it
- # and add multilib dir if necessary.
+ # and add multilib dir if necessary...
lt_tmp_lt_search_path_spec=
- lt_multi_os_dir=`$CC $CPPFLAGS $CFLAGS $LDFLAGS -print-multi-os-directory 2>/dev/null`
+ lt_multi_os_dir=/`$CC $CPPFLAGS $CFLAGS $LDFLAGS -print-multi-os-directory 2>/dev/null`
+ # ...but if some path component already ends with the multilib dir we assume
+ # that all is fine and trust -print-search-dirs as is (GCC 4.2? or newer).
+ case "$lt_multi_os_dir; $lt_search_path_spec " in
+ "/; "* | "/.; "* | "/./; "* | *"$lt_multi_os_dir "* | *"$lt_multi_os_dir/ "*)
+ lt_multi_os_dir=
+ ;;
+ esac
for lt_sys_path in $lt_search_path_spec; do
- if test -d "$lt_sys_path/$lt_multi_os_dir"; then
- lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path/$lt_multi_os_dir"
- else
+ if test -d "$lt_sys_path$lt_multi_os_dir"; then
+ lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path$lt_multi_os_dir"
+ elif test -n "$lt_multi_os_dir"; then
test -d "$lt_sys_path" && \
lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path"
fi
done
- lt_search_path_spec=`$ECHO $lt_tmp_lt_search_path_spec | awk '
-BEGIN {RS=" "; FS="/|\n";} {
- lt_foo="";
- lt_count=0;
+ lt_search_path_spec=`$ECHO "$lt_tmp_lt_search_path_spec" | awk '
+BEGIN {RS = " "; FS = "/|\n";} {
+ lt_foo = "";
+ lt_count = 0;
for (lt_i = NF; lt_i > 0; lt_i--) {
if ($lt_i != "" && $lt_i != ".") {
if ($lt_i == "..") {
@@ -10165,7 +11489,7 @@
lt_count++;
} else {
if (lt_count == 0) {
- lt_foo="/" $lt_i lt_foo;
+ lt_foo = "/" $lt_i lt_foo;
} else {
lt_count--;
}
@@ -10175,7 +11499,13 @@
if (lt_foo != "") { lt_freq[lt_foo]++; }
if (lt_freq[lt_foo] == 1) { print lt_foo; }
}'`
- sys_lib_search_path_spec=`$ECHO $lt_search_path_spec`
+ # AWK program above erroneously prepends '/' to C:/dos/paths
+ # for these hosts.
+ case $host_os in
+ mingw* | cegcc*) lt_search_path_spec=`$ECHO "$lt_search_path_spec" |\
+ $SED 's|/\([A-Za-z]:\)|\1|g'` ;;
+ esac
+ sys_lib_search_path_spec=`$ECHO "$lt_search_path_spec" | $lt_NL2SP`
else
sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib"
fi
@@ -10182,7 +11512,7 @@
library_names_spec=
libname_spec='lib$name'
soname_spec=
-shrext_cmds=".so"
+shrext_cmds=.so
postinstall_cmds=
postuninstall_cmds=
finish_cmds=
@@ -10199,36 +11529,38 @@
# flags to be left without arguments
need_version=unknown
+
+
case $host_os in
aix3*)
- version_type=linux
- library_names_spec='${libname}${release}${shared_ext}$versuffix $libname.a'
+ version_type=linux # correct to gnu/linux during the next big refactor
+ library_names_spec='$libname$release$shared_ext$versuffix $libname.a'
shlibpath_var=LIBPATH
# AIX 3 has no versioning support, so we append a major version to the name.
- soname_spec='${libname}${release}${shared_ext}$major'
+ soname_spec='$libname$release$shared_ext$major'
;;
aix[4-9]*)
- version_type=linux
+ version_type=linux # correct to gnu/linux during the next big refactor
need_lib_prefix=no
need_version=no
hardcode_into_libs=yes
- if test "$host_cpu" = ia64; then
+ if test ia64 = "$host_cpu"; then
# AIX 5 supports IA64
- library_names_spec='${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext}$versuffix $libname${shared_ext}'
+ library_names_spec='$libname$release$shared_ext$major $libname$release$shared_ext$versuffix $libname$shared_ext'
shlibpath_var=LD_LIBRARY_PATH
else
# With GCC up to 2.95.x, collect2 would create an import file
# for dependence libraries. The import file would start with
- # the line `#! .'. This would cause the generated library to
- # depend on `.', always an invalid library. This was fixed in
+ # the line '#! .'. This would cause the generated library to
+ # depend on '.', always an invalid library. This was fixed in
# development snapshots of GCC prior to 3.0.
case $host_os in
aix4 | aix4.[01] | aix4.[01].*)
if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)'
echo ' yes '
- echo '#endif'; } | ${CC} -E - | $GREP yes > /dev/null; then
+ echo '#endif'; } | $CC -E - | $GREP yes > /dev/null; then
:
else
can_build_shared=no
@@ -10235,20 +11567,70 @@
fi
;;
esac
- # AIX (on Power*) has no versioning support, so currently we can not hardcode correct
+ # Using Import Files as archive members, it is possible to support
+ # filename-based versioning of shared library archives on AIX. While
+ # this would work for both with and without runtime linking, it will
+ # prevent static linking of such archives. So we do filename-based
+ # shared library versioning with .so extension only, which is used
+ # when both runtime linking and shared linking is enabled.
+ # Unfortunately, runtime linking may impact performance, so we do
+ # not want this to be the default eventually. Also, we use the
+ # versioned .so libs for executables only if there is the -brtl
+ # linker flag in LDFLAGS as well, or --with-aix-soname=svr4 only.
+ # To allow for filename-based versioning support, we need to create
+ # libNAME.so.V as an archive file, containing:
+ # *) an Import File, referring to the versioned filename of the
+ # archive as well as the shared archive member, telling the
+ # bitwidth (32 or 64) of that shared object, and providing the
+ # list of exported symbols of that shared object, eventually
+ # decorated with the 'weak' keyword
+ # *) the shared object with the F_LOADONLY flag set, to really avoid
+ # it being seen by the linker.
+ # At run time we better use the real file rather than another symlink,
+ # but for link time we create the symlink libNAME.so -> libNAME.so.V
+
+ case $with_aix_soname,$aix_use_runtimelinking in
+ # AIX (on Power*) has no versioning support, so currently we cannot hardcode correct
# soname into executable. Probably we can add versioning support to
# collect2, so additional links can be useful in future.
- if test "$aix_use_runtimelinking" = yes; then
+ aix,yes) # traditional libtool
+ dynamic_linker='AIX unversionable lib.so'
# If using run time linking (on AIX 4.2 or later) use lib<name>.so
# instead of lib<name>.a to let people know that these are not
# typical AIX shared libraries.
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
- else
+ library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+ ;;
+ aix,no) # traditional AIX only
+ dynamic_linker='AIX lib.a(lib.so.V)'
# We preserve .a as extension for shared libraries through AIX4.2
# and later when we are not doing run time linking.
- library_names_spec='${libname}${release}.a $libname.a'
- soname_spec='${libname}${release}${shared_ext}$major'
- fi
+ library_names_spec='$libname$release.a $libname.a'
+ soname_spec='$libname$release$shared_ext$major'
+ ;;
+ svr4,*) # full svr4 only
+ dynamic_linker="AIX lib.so.V($shared_archive_member_spec.o)"
+ library_names_spec='$libname$release$shared_ext$major $libname$shared_ext'
+ # We do not specify a path in Import Files, so LIBPATH fires.
+ shlibpath_overrides_runpath=yes
+ ;;
+ *,yes) # both, prefer svr4
+ dynamic_linker="AIX lib.so.V($shared_archive_member_spec.o), lib.a(lib.so.V)"
+ library_names_spec='$libname$release$shared_ext$major $libname$shared_ext'
+ # unpreferred sharedlib libNAME.a needs extra handling
+ postinstall_cmds='test -n "$linkname" || linkname="$realname"~func_stripname "" ".so" "$linkname"~$install_shared_prog "$dir/$func_stripname_result.$libext" "$destdir/$func_stripname_result.$libext"~test -z "$tstripme" || test -z "$striplib" || $striplib "$destdir/$func_stripname_result.$libext"'
+ postuninstall_cmds='for n in $library_names $old_library; do :; done~func_stripname "" ".so" "$n"~test "$func_stripname_result" = "$n" || func_append rmfiles " $odir/$func_stripname_result.$libext"'
+ # We do not specify a path in Import Files, so LIBPATH fires.
+ shlibpath_overrides_runpath=yes
+ ;;
+ *,no) # both, prefer aix
+ dynamic_linker="AIX lib.a(lib.so.V), lib.so.V($shared_archive_member_spec.o)"
+ library_names_spec='$libname$release.a $libname.a'
+ soname_spec='$libname$release$shared_ext$major'
+ # unpreferred sharedlib libNAME.so.V and symlink libNAME.so need extra handling
+ postinstall_cmds='test -z "$dlname" || $install_shared_prog $dir/$dlname $destdir/$dlname~test -z "$tstripme" || test -z "$striplib" || $striplib $destdir/$dlname~test -n "$linkname" || linkname=$realname~func_stripname "" ".a" "$linkname"~(cd "$destdir" && $LN_S -f $dlname $func_stripname_result.so)'
+ postuninstall_cmds='test -z "$dlname" || func_append rmfiles " $odir/$dlname"~for n in $old_library $library_names; do :; done~func_stripname "" ".a" "$n"~func_append rmfiles " $odir/$func_stripname_result.so"'
+ ;;
+ esac
shlibpath_var=LIBPATH
fi
;;
@@ -10258,27 +11640,27 @@
powerpc)
# Since July 2007 AmigaOS4 officially supports .so libraries.
# When compiling the executable, add -use-dynld -Lsobjs: to the compileline.
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+ library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
;;
m68k)
library_names_spec='$libname.ixlibrary $libname.a'
# Create ${libname}_ixlibrary.a entries in /sys/libs.
- finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`$ECHO "X$lib" | $Xsed -e '\''s%^.*/\([^/]*\)\.ixlibrary$%\1%'\''`; test $RM /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done'
+ finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`func_echo_all "$lib" | $SED '\''s%^.*/\([^/]*\)\.ixlibrary$%\1%'\''`; $RM /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done'
;;
esac
;;
beos*)
- library_names_spec='${libname}${shared_ext}'
+ library_names_spec='$libname$shared_ext'
dynamic_linker="$host_os ld.so"
shlibpath_var=LIBRARY_PATH
;;
bsdi[45]*)
- version_type=linux
+ version_type=linux # correct to gnu/linux during the next big refactor
need_version=no
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
+ library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+ soname_spec='$libname$release$shared_ext$major'
finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir'
shlibpath_var=LD_LIBRARY_PATH
sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib"
@@ -10290,16 +11672,17 @@
cygwin* | mingw* | pw32* | cegcc*)
version_type=windows
- shrext_cmds=".dll"
+ shrext_cmds=.dll
need_version=no
need_lib_prefix=no
- case $GCC,$host_os in
- yes,cygwin* | yes,mingw* | yes,pw32* | yes,cegcc*)
+ case $GCC,$cc_basename in
+ yes,*)
+ # gcc
library_names_spec='$libname.dll.a'
# DLL is installed to $(libdir)/../bin by postinstall_cmds
- postinstall_cmds='base_file=`basename \${file}`~
- dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i; echo \$dlname'\''`~
+ postinstall_cmds='base_file=`basename \$file`~
+ dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\$base_file'\''i; echo \$dlname'\''`~
dldir=$destdir/`dirname \$dlpath`~
test -d \$dldir || mkdir -p \$dldir~
$install_prog $dir/$dlname \$dldir/$dlname~
@@ -10315,37 +11698,84 @@
case $host_os in
cygwin*)
# Cygwin DLLs use 'cyg' prefix rather than 'lib'
- soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
- sys_lib_search_path_spec="/usr/lib /lib/w32api /lib /usr/local/lib"
+ soname_spec='`echo $libname | sed -e 's/^lib/cyg/'``echo $release | $SED -e 's/[.]/-/g'`$versuffix$shared_ext'
+
+ sys_lib_search_path_spec="$sys_lib_search_path_spec /usr/lib/w32api"
;;
mingw* | cegcc*)
# MinGW DLLs use traditional 'lib' prefix
- soname_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
- sys_lib_search_path_spec=`$CC -print-search-dirs | $GREP "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"`
+ soname_spec='$libname`echo $release | $SED -e 's/[.]/-/g'`$versuffix$shared_ext'
+ ;;
+ pw32*)
+ # pw32 DLLs use 'pw' prefix rather than 'lib'
+ library_names_spec='`echo $libname | sed -e 's/^lib/pw/'``echo $release | $SED -e 's/[.]/-/g'`$versuffix$shared_ext'
+ ;;
+ esac
+ dynamic_linker='Win32 ld.exe'
+ ;;
+
+ *,cl*)
+ # Native MSVC
+ libname_spec='$name'
+ soname_spec='$libname`echo $release | $SED -e 's/[.]/-/g'`$versuffix$shared_ext'
+ library_names_spec='$libname.dll.lib'
+
+ case $build_os in
+ mingw*)
+ sys_lib_search_path_spec=
+ lt_save_ifs=$IFS
+ IFS=';'
+ for lt_path in $LIB
+ do
+ IFS=$lt_save_ifs
+ # Let DOS variable expansion print the short 8.3 style file name.
+ lt_path=`cd "$lt_path" 2>/dev/null && cmd //C "for %i in (".") do @echo %~si"`
+ sys_lib_search_path_spec="$sys_lib_search_path_spec $lt_path"
+ done
+ IFS=$lt_save_ifs
+ # Convert to MSYS style.
+ sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | sed -e 's|\\\\|/|g' -e 's| \\([a-zA-Z]\\):| /\\1|g' -e 's|^ ||'`
+ ;;
+ cygwin*)
+ # Convert to unix form, then to dos form, then back to unix form
+ # but this time dos style (no spaces!) so that the unix form looks
+ # like /cygdrive/c/PROGRA~1:/cygdr...
+ sys_lib_search_path_spec=`cygpath --path --unix "$LIB"`
+ sys_lib_search_path_spec=`cygpath --path --dos "$sys_lib_search_path_spec" 2>/dev/null`
+ sys_lib_search_path_spec=`cygpath --path --unix "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"`
+ ;;
+ *)
+ sys_lib_search_path_spec=$LIB
if $ECHO "$sys_lib_search_path_spec" | $GREP ';[c-zC-Z]:/' >/dev/null; then
- # It is most probably a Windows format PATH printed by
- # mingw gcc, but we are running on Cygwin. Gcc prints its search
- # path with ; separators, and with drive letters. We can handle the
- # drive letters (cygwin fileutils understands them), so leave them,
- # especially as we might pass files found there to a mingw objdump,
- # which wouldn't understand a cygwinified path. Ahh.
+ # It is most probably a Windows format PATH.
sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'`
else
- sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"`
+ sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"`
fi
+ # FIXME: find the short name or the path components, as spaces are
+ # common. (e.g. "Program Files" -> "PROGRA~1")
;;
- pw32*)
- # pw32 DLLs use 'pw' prefix rather than 'lib'
- library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
- ;;
esac
+
+ # DLL is installed to $(libdir)/../bin by postinstall_cmds
+ postinstall_cmds='base_file=`basename \$file`~
+ dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\$base_file'\''i; echo \$dlname'\''`~
+ dldir=$destdir/`dirname \$dlpath`~
+ test -d \$dldir || mkdir -p \$dldir~
+ $install_prog $dir/$dlname \$dldir/$dlname'
+ postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~
+ dlpath=$dir/\$dldll~
+ $RM \$dlpath'
+ shlibpath_overrides_runpath=yes
+ dynamic_linker='Win32 link.exe'
;;
*)
- library_names_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext} $libname.lib'
+ # Assume MSVC wrapper
+ library_names_spec='$libname`echo $release | $SED -e 's/[.]/-/g'`$versuffix$shared_ext $libname.lib'
+ dynamic_linker='Win32 ld.exe'
;;
esac
- dynamic_linker='Win32 ld.exe'
# FIXME: first we should search . and the directory the executable is in
shlibpath_var=PATH
;;
@@ -10355,8 +11785,8 @@
version_type=darwin
need_lib_prefix=no
need_version=no
- library_names_spec='${libname}${release}${major}$shared_ext ${libname}$shared_ext'
- soname_spec='${libname}${release}${major}$shared_ext'
+ library_names_spec='$libname$release$major$shared_ext $libname$shared_ext'
+ soname_spec='$libname$release$major$shared_ext'
shlibpath_overrides_runpath=yes
shlibpath_var=DYLD_LIBRARY_PATH
shrext_cmds='`test .$module = .yes && echo .so || echo .dylib`'
@@ -10366,18 +11796,14 @@
;;
dgux*)
- version_type=linux
+ version_type=linux # correct to gnu/linux during the next big refactor
need_lib_prefix=no
need_version=no
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname$shared_ext'
- soname_spec='${libname}${release}${shared_ext}$major'
+ library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+ soname_spec='$libname$release$shared_ext$major'
shlibpath_var=LD_LIBRARY_PATH
;;
-freebsd1*)
- dynamic_linker=no
- ;;
-
freebsd* | dragonfly*)
# DragonFly does not have aout. When/if they implement a new
# versioning mechanism, adjust this.
@@ -10385,7 +11811,7 @@
objformat=`/usr/bin/objformat`
else
case $host_os in
- freebsd[123]*) objformat=aout ;;
+ freebsd[23].*) objformat=aout ;;
*) objformat=elf ;;
esac
fi
@@ -10392,18 +11818,19 @@
version_type=freebsd-$objformat
case $version_type in
freebsd-elf*)
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}'
+ library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+ soname_spec='$libname$release$shared_ext$major'
need_version=no
need_lib_prefix=no
;;
freebsd-*)
- library_names_spec='${libname}${release}${shared_ext}$versuffix $libname${shared_ext}$versuffix'
+ library_names_spec='$libname$release$shared_ext$versuffix $libname$shared_ext$versuffix'
need_version=yes
;;
esac
shlibpath_var=LD_LIBRARY_PATH
case $host_os in
- freebsd2*)
+ freebsd2.*)
shlibpath_overrides_runpath=yes
;;
freebsd3.[01]* | freebsdelf3.[01]*)
@@ -10422,13 +11849,16 @@
esac
;;
-gnu*)
- version_type=linux
+haiku*)
+ version_type=linux # correct to gnu/linux during the next big refactor
need_lib_prefix=no
need_version=no
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
- shlibpath_var=LD_LIBRARY_PATH
+ dynamic_linker="$host_os runtime_loader"
+ library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+ soname_spec='$libname$release$shared_ext$major'
+ shlibpath_var=LIBRARY_PATH
+ shlibpath_overrides_runpath=no
+ sys_lib_dlsearch_path_spec='/boot/home/config/lib /boot/common/lib /boot/system/lib'
hardcode_into_libs=yes
;;
@@ -10445,14 +11875,15 @@
dynamic_linker="$host_os dld.so"
shlibpath_var=LD_LIBRARY_PATH
shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
- if test "X$HPUX_IA64_MODE" = X32; then
+ library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+ soname_spec='$libname$release$shared_ext$major'
+ if test 32 = "$HPUX_IA64_MODE"; then
sys_lib_search_path_spec="/usr/lib/hpux32 /usr/local/lib/hpux32 /usr/local/lib"
+ sys_lib_dlsearch_path_spec=/usr/lib/hpux32
else
sys_lib_search_path_spec="/usr/lib/hpux64 /usr/local/lib/hpux64"
+ sys_lib_dlsearch_path_spec=/usr/lib/hpux64
fi
- sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
;;
hppa*64*)
shrext_cmds='.sl'
@@ -10460,8 +11891,8 @@
dynamic_linker="$host_os dld.sl"
shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH
shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
+ library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+ soname_spec='$libname$release$shared_ext$major'
sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64"
sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
;;
@@ -10470,20 +11901,22 @@
dynamic_linker="$host_os dld.sl"
shlibpath_var=SHLIB_PATH
shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
+ library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+ soname_spec='$libname$release$shared_ext$major'
;;
esac
- # HP-UX runs *really* slowly unless shared libraries are mode 555.
+ # HP-UX runs *really* slowly unless shared libraries are mode 555, ...
postinstall_cmds='chmod 555 $lib'
+ # or fails outright, so override atomically:
+ install_override_mode=555
;;
interix[3-9]*)
- version_type=linux
+ version_type=linux # correct to gnu/linux during the next big refactor
need_lib_prefix=no
need_version=no
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
+ library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+ soname_spec='$libname$release$shared_ext$major'
dynamic_linker='Interix 3.x ld.so.1 (PE, like ELF)'
shlibpath_var=LD_LIBRARY_PATH
shlibpath_overrides_runpath=no
@@ -10494,8 +11927,8 @@
case $host_os in
nonstopux*) version_type=nonstopux ;;
*)
- if test "$lt_cv_prog_gnu_ld" = yes; then
- version_type=linux
+ if test yes = "$lt_cv_prog_gnu_ld"; then
+ version_type=linux # correct to gnu/linux during the next big refactor
else
version_type=irix
fi ;;
@@ -10502,8 +11935,8 @@
esac
need_lib_prefix=no
need_version=no
- soname_spec='${libname}${release}${shared_ext}$major'
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext} $libname${shared_ext}'
+ soname_spec='$libname$release$shared_ext$major'
+ library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$release$shared_ext $libname$shared_ext'
case $host_os in
irix5* | nonstopux*)
libsuff= shlibsuff=
@@ -10522,8 +11955,8 @@
esac
shlibpath_var=LD_LIBRARY${shlibsuff}_PATH
shlibpath_overrides_runpath=no
- sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}"
- sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}"
+ sys_lib_search_path_spec="/usr/lib$libsuff /lib$libsuff /usr/local/lib$libsuff"
+ sys_lib_dlsearch_path_spec="/usr/lib$libsuff /lib$libsuff"
hardcode_into_libs=yes
;;
@@ -10532,22 +11965,47 @@
dynamic_linker=no
;;
-# This must be Linux ELF.
-linux* | k*bsd*-gnu)
- version_type=linux
+linux*android*)
+ version_type=none # Android doesn't support versioned libraries.
need_lib_prefix=no
need_version=no
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
+ library_names_spec='$libname$release$shared_ext'
+ soname_spec='$libname$release$shared_ext'
+ finish_cmds=
+ shlibpath_var=LD_LIBRARY_PATH
+ shlibpath_overrides_runpath=yes
+
+ # This implies no fast_install, which is unacceptable.
+ # Some rework will be needed to allow for fast_install
+ # before this can be enabled.
+ hardcode_into_libs=yes
+
+ dynamic_linker='Android linker'
+ # Don't embed -rpath directories since the linker doesn't support them.
+ hardcode_libdir_flag_spec='-L$libdir'
+ ;;
+
+# This must be glibc/ELF.
+linux* | k*bsd*-gnu | kopensolaris*-gnu | gnu*)
+ version_type=linux # correct to gnu/linux during the next big refactor
+ need_lib_prefix=no
+ need_version=no
+ library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+ soname_spec='$libname$release$shared_ext$major'
finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir'
shlibpath_var=LD_LIBRARY_PATH
shlibpath_overrides_runpath=no
+
# Some binutils ld are patched to set DT_RUNPATH
- save_LDFLAGS=$LDFLAGS
- save_libdir=$libdir
- eval "libdir=/foo; wl=\"$lt_prog_compiler_wl\"; \
- LDFLAGS=\"\$LDFLAGS $hardcode_libdir_flag_spec\""
- cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+ if ${lt_cv_shlibpath_overrides_runpath+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ lt_cv_shlibpath_overrides_runpath=no
+ save_LDFLAGS=$LDFLAGS
+ save_libdir=$libdir
+ eval "libdir=/foo; wl=\"$lt_prog_compiler_wl\"; \
+ LDFLAGS=\"\$LDFLAGS $hardcode_libdir_flag_spec\""
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
/* end confdefs.h. */
int
@@ -10560,22 +12018,31 @@
_ACEOF
if ac_fn_c_try_link "$LINENO"; then :
if ($OBJDUMP -p conftest$ac_exeext) 2>/dev/null | grep "RUNPATH.*$libdir" >/dev/null; then :
- shlibpath_overrides_runpath=yes
+ lt_cv_shlibpath_overrides_runpath=yes
fi
fi
rm -f core conftest.err conftest.$ac_objext \
conftest$ac_exeext conftest.$ac_ext
- LDFLAGS=$save_LDFLAGS
- libdir=$save_libdir
+ LDFLAGS=$save_LDFLAGS
+ libdir=$save_libdir
+fi
+
+ shlibpath_overrides_runpath=$lt_cv_shlibpath_overrides_runpath
+
# This implies no fast_install, which is unacceptable.
# Some rework will be needed to allow for fast_install
# before this can be enabled.
hardcode_into_libs=yes
- # Append ld.so.conf contents to the search path
+ # Ideally, we could use ldconfig to report *all* directores which are
+ # searched for libraries, however this is still not possible. Aside from not
+ # being certain /sbin/ldconfig is available, command
+ # 'ldconfig -N -X -v | grep ^/' on 64bit Fedora does not report /usr/lib64,
+ # even though it is searched at run-time. Try to do the best guess by
+ # appending ld.so.conf contents (and includes) to the search path.
if test -f /etc/ld.so.conf; then
- lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \$2)); skip = 1; } { if (!skip) print \$0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;/^[ ]*hwcap[ ]/d;s/[:, ]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;/^$/d' | tr '\n' ' '`
+ lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \$2)); skip = 1; } { if (!skip) print \$0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;/^[ ]*hwcap[ ]/d;s/[:, ]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;s/"//g;/^$/d' | tr '\n' ' '`
sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra"
fi
@@ -10593,12 +12060,12 @@
need_lib_prefix=no
need_version=no
if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
+ library_names_spec='$libname$release$shared_ext$versuffix $libname$shared_ext$versuffix'
finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
dynamic_linker='NetBSD (a.out) ld.so'
else
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
+ library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+ soname_spec='$libname$release$shared_ext$major'
dynamic_linker='NetBSD ld.elf_so'
fi
shlibpath_var=LD_LIBRARY_PATH
@@ -10607,8 +12074,8 @@
;;
newsos6)
- version_type=linux
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+ version_type=linux # correct to gnu/linux during the next big refactor
+ library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
shlibpath_var=LD_LIBRARY_PATH
shlibpath_overrides_runpath=yes
;;
@@ -10617,8 +12084,8 @@
version_type=qnx
need_lib_prefix=no
need_version=no
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
+ library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+ soname_spec='$libname$release$shared_ext$major'
shlibpath_var=LD_LIBRARY_PATH
shlibpath_overrides_runpath=no
hardcode_into_libs=yes
@@ -10625,39 +12092,49 @@
dynamic_linker='ldqnx.so'
;;
-openbsd*)
+openbsd* | bitrig*)
version_type=sunos
- sys_lib_dlsearch_path_spec="/usr/lib"
+ sys_lib_dlsearch_path_spec=/usr/lib
need_lib_prefix=no
- # Some older versions of OpenBSD (3.3 at least) *do* need versioned libs.
- case $host_os in
- openbsd3.3 | openbsd3.3.*) need_version=yes ;;
- *) need_version=no ;;
- esac
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
+ if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`"; then
+ need_version=no
+ else
+ need_version=yes
+ fi
+ library_names_spec='$libname$release$shared_ext$versuffix $libname$shared_ext$versuffix'
finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
shlibpath_var=LD_LIBRARY_PATH
- if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
- case $host_os in
- openbsd2.[89] | openbsd2.[89].*)
- shlibpath_overrides_runpath=no
- ;;
- *)
- shlibpath_overrides_runpath=yes
- ;;
- esac
- else
- shlibpath_overrides_runpath=yes
- fi
+ shlibpath_overrides_runpath=yes
;;
os2*)
libname_spec='$name'
- shrext_cmds=".dll"
+ version_type=windows
+ shrext_cmds=.dll
+ need_version=no
need_lib_prefix=no
- library_names_spec='$libname${shared_ext} $libname.a'
+ # OS/2 can only load a DLL with a base name of 8 characters or less.
+ soname_spec='`test -n "$os2dllname" && libname="$os2dllname";
+ v=$($ECHO $release$versuffix | tr -d .-);
+ n=$($ECHO $libname | cut -b -$((8 - ${#v})) | tr . _);
+ $ECHO $n$v`$shared_ext'
+ library_names_spec='${libname}_dll.$libext'
dynamic_linker='OS/2 ld.exe'
- shlibpath_var=LIBPATH
+ shlibpath_var=BEGINLIBPATH
+ sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib"
+ sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
+ postinstall_cmds='base_file=`basename \$file`~
+ dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\$base_file'\''i; $ECHO \$dlname'\''`~
+ dldir=$destdir/`dirname \$dlpath`~
+ test -d \$dldir || mkdir -p \$dldir~
+ $install_prog $dir/$dlname \$dldir/$dlname~
+ chmod a+x \$dldir/$dlname~
+ if test -n '\''$stripme'\'' && test -n '\''$striplib'\''; then
+ eval '\''$striplib \$dldir/$dlname'\'' || exit \$?;
+ fi'
+ postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; $ECHO \$dlname'\''`~
+ dlpath=$dir/\$dldll~
+ $RM \$dlpath'
;;
osf3* | osf4* | osf5*)
@@ -10664,11 +12141,11 @@
version_type=osf
need_lib_prefix=no
need_version=no
- soname_spec='${libname}${release}${shared_ext}$major'
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+ soname_spec='$libname$release$shared_ext$major'
+ library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
shlibpath_var=LD_LIBRARY_PATH
sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib"
- sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec"
+ sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
;;
rdos*)
@@ -10676,11 +12153,11 @@
;;
solaris*)
- version_type=linux
+ version_type=linux # correct to gnu/linux during the next big refactor
need_lib_prefix=no
need_version=no
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
+ library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+ soname_spec='$libname$release$shared_ext$major'
shlibpath_var=LD_LIBRARY_PATH
shlibpath_overrides_runpath=yes
hardcode_into_libs=yes
@@ -10690,11 +12167,11 @@
sunos4*)
version_type=sunos
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
+ library_names_spec='$libname$release$shared_ext$versuffix $libname$shared_ext$versuffix'
finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir'
shlibpath_var=LD_LIBRARY_PATH
shlibpath_overrides_runpath=yes
- if test "$with_gnu_ld" = yes; then
+ if test yes = "$with_gnu_ld"; then
need_lib_prefix=no
fi
need_version=yes
@@ -10701,9 +12178,9 @@
;;
sysv4 | sysv4.3*)
- version_type=linux
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
+ version_type=linux # correct to gnu/linux during the next big refactor
+ library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+ soname_spec='$libname$release$shared_ext$major'
shlibpath_var=LD_LIBRARY_PATH
case $host_vendor in
sni)
@@ -10724,24 +12201,24 @@
;;
sysv4*MP*)
- if test -d /usr/nec ;then
- version_type=linux
- library_names_spec='$libname${shared_ext}.$versuffix $libname${shared_ext}.$major $libname${shared_ext}'
- soname_spec='$libname${shared_ext}.$major'
+ if test -d /usr/nec; then
+ version_type=linux # correct to gnu/linux during the next big refactor
+ library_names_spec='$libname$shared_ext.$versuffix $libname$shared_ext.$major $libname$shared_ext'
+ soname_spec='$libname$shared_ext.$major'
shlibpath_var=LD_LIBRARY_PATH
fi
;;
sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*)
- version_type=freebsd-elf
+ version_type=sco
need_lib_prefix=no
need_version=no
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
+ library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext $libname$shared_ext'
+ soname_spec='$libname$release$shared_ext$major'
shlibpath_var=LD_LIBRARY_PATH
shlibpath_overrides_runpath=yes
hardcode_into_libs=yes
- if test "$with_gnu_ld" = yes; then
+ if test yes = "$with_gnu_ld"; then
sys_lib_search_path_spec='/usr/local/lib /usr/gnu/lib /usr/ccs/lib /usr/lib /lib'
else
sys_lib_search_path_spec='/usr/ccs/lib /usr/lib'
@@ -10756,10 +12233,10 @@
tpf*)
# TPF is a cross-target only. Preferred cross-host = GNU/Linux.
- version_type=linux
+ version_type=linux # correct to gnu/linux during the next big refactor
need_lib_prefix=no
need_version=no
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+ library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
shlibpath_var=LD_LIBRARY_PATH
shlibpath_overrides_runpath=no
hardcode_into_libs=yes
@@ -10766,9 +12243,9 @@
;;
uts4*)
- version_type=linux
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
+ version_type=linux # correct to gnu/linux during the next big refactor
+ library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+ soname_spec='$libname$release$shared_ext$major'
shlibpath_var=LD_LIBRARY_PATH
;;
@@ -10778,22 +12255,29 @@
esac
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $dynamic_linker" >&5
$as_echo "$dynamic_linker" >&6; }
-test "$dynamic_linker" = no && can_build_shared=no
+test no = "$dynamic_linker" && can_build_shared=no
variables_saved_for_relink="PATH $shlibpath_var $runpath_var"
-if test "$GCC" = yes; then
+if test yes = "$GCC"; then
variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH"
fi
-if test "${lt_cv_sys_lib_search_path_spec+set}" = set; then
- sys_lib_search_path_spec="$lt_cv_sys_lib_search_path_spec"
+if test set = "${lt_cv_sys_lib_search_path_spec+set}"; then
+ sys_lib_search_path_spec=$lt_cv_sys_lib_search_path_spec
fi
-if test "${lt_cv_sys_lib_dlsearch_path_spec+set}" = set; then
- sys_lib_dlsearch_path_spec="$lt_cv_sys_lib_dlsearch_path_spec"
+
+if test set = "${lt_cv_sys_lib_dlsearch_path_spec+set}"; then
+ sys_lib_dlsearch_path_spec=$lt_cv_sys_lib_dlsearch_path_spec
fi
+# remember unaugmented sys_lib_dlsearch_path content for libtool script decls...
+configure_time_dlsearch_path=$sys_lib_dlsearch_path_spec
+# ... but it needs LT_SYS_LIBRARY_PATH munging for other configure-time code
+func_munge_path_list sys_lib_dlsearch_path_spec "$LT_SYS_LIBRARY_PATH"
+# to be used as default LT_SYS_LIBRARY_PATH value in generated libtool
+configure_time_lt_sys_library_path=$LT_SYS_LIBRARY_PATH
@@ -10878,20 +12362,33 @@
+
+
+
+
+
+
+
+
+
+
+
+
+
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to hardcode library paths into programs" >&5
$as_echo_n "checking how to hardcode library paths into programs... " >&6; }
hardcode_action=
if test -n "$hardcode_libdir_flag_spec" ||
test -n "$runpath_var" ||
- test "X$hardcode_automatic" = "Xyes" ; then
+ test yes = "$hardcode_automatic"; then
# We can hardcode non-existent directories.
- if test "$hardcode_direct" != no &&
+ if test no != "$hardcode_direct" &&
# If the only mechanism to avoid hardcoding is shlibpath_var, we
# have to relink, otherwise we might link with an installed library
# when we should be linking with a yet-to-be-installed one
- ## test "$_LT_TAGVAR(hardcode_shlibpath_var, )" != no &&
- test "$hardcode_minus_L" != no; then
+ ## test no != "$_LT_TAGVAR(hardcode_shlibpath_var, )" &&
+ test no != "$hardcode_minus_L"; then
# Linking always hardcodes the temporary library directory.
hardcode_action=relink
else
@@ -10906,12 +12403,12 @@
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $hardcode_action" >&5
$as_echo "$hardcode_action" >&6; }
-if test "$hardcode_action" = relink ||
- test "$inherit_rpath" = yes; then
+if test relink = "$hardcode_action" ||
+ test yes = "$inherit_rpath"; then
# Fast installation is not supported
enable_fast_install=no
-elif test "$shlibpath_overrides_runpath" = yes ||
- test "$enable_shared" = no; then
+elif test yes = "$shlibpath_overrides_runpath" ||
+ test no = "$enable_shared"; then
# Fast installation is not necessary
enable_fast_install=needless
fi
@@ -10921,7 +12418,7 @@
- if test "x$enable_dlopen" != xyes; then
+ if test yes != "$enable_dlopen"; then
enable_dlopen=unknown
enable_dlopen_self=unknown
enable_dlopen_self_static=unknown
@@ -10931,23 +12428,23 @@
case $host_os in
beos*)
- lt_cv_dlopen="load_add_on"
+ lt_cv_dlopen=load_add_on
lt_cv_dlopen_libs=
lt_cv_dlopen_self=yes
;;
mingw* | pw32* | cegcc*)
- lt_cv_dlopen="LoadLibrary"
+ lt_cv_dlopen=LoadLibrary
lt_cv_dlopen_libs=
;;
cygwin*)
- lt_cv_dlopen="dlopen"
+ lt_cv_dlopen=dlopen
lt_cv_dlopen_libs=
;;
darwin*)
- # if libdl is installed we need to link against it
+ # if libdl is installed we need to link against it
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for dlopen in -ldl" >&5
$as_echo_n "checking for dlopen in -ldl... " >&6; }
if ${ac_cv_lib_dl_dlopen+:} false; then :
@@ -10985,10 +12482,10 @@
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dl_dlopen" >&5
$as_echo "$ac_cv_lib_dl_dlopen" >&6; }
if test "x$ac_cv_lib_dl_dlopen" = xyes; then :
- lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"
+ lt_cv_dlopen=dlopen lt_cv_dlopen_libs=-ldl
else
- lt_cv_dlopen="dyld"
+ lt_cv_dlopen=dyld
lt_cv_dlopen_libs=
lt_cv_dlopen_self=yes
@@ -10996,10 +12493,18 @@
;;
+ tpf*)
+ # Don't try to run any link tests for TPF. We know it's impossible
+ # because TPF is a cross-compiler, and we know how we open DSOs.
+ lt_cv_dlopen=dlopen
+ lt_cv_dlopen_libs=
+ lt_cv_dlopen_self=no
+ ;;
+
*)
ac_fn_c_check_func "$LINENO" "shl_load" "ac_cv_func_shl_load"
if test "x$ac_cv_func_shl_load" = xyes; then :
- lt_cv_dlopen="shl_load"
+ lt_cv_dlopen=shl_load
else
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for shl_load in -ldld" >&5
$as_echo_n "checking for shl_load in -ldld... " >&6; }
@@ -11038,11 +12543,11 @@
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dld_shl_load" >&5
$as_echo "$ac_cv_lib_dld_shl_load" >&6; }
if test "x$ac_cv_lib_dld_shl_load" = xyes; then :
- lt_cv_dlopen="shl_load" lt_cv_dlopen_libs="-ldld"
+ lt_cv_dlopen=shl_load lt_cv_dlopen_libs=-ldld
else
ac_fn_c_check_func "$LINENO" "dlopen" "ac_cv_func_dlopen"
if test "x$ac_cv_func_dlopen" = xyes; then :
- lt_cv_dlopen="dlopen"
+ lt_cv_dlopen=dlopen
else
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for dlopen in -ldl" >&5
$as_echo_n "checking for dlopen in -ldl... " >&6; }
@@ -11081,7 +12586,7 @@
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dl_dlopen" >&5
$as_echo "$ac_cv_lib_dl_dlopen" >&6; }
if test "x$ac_cv_lib_dl_dlopen" = xyes; then :
- lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"
+ lt_cv_dlopen=dlopen lt_cv_dlopen_libs=-ldl
else
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for dlopen in -lsvld" >&5
$as_echo_n "checking for dlopen in -lsvld... " >&6; }
@@ -11120,7 +12625,7 @@
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_svld_dlopen" >&5
$as_echo "$ac_cv_lib_svld_dlopen" >&6; }
if test "x$ac_cv_lib_svld_dlopen" = xyes; then :
- lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-lsvld"
+ lt_cv_dlopen=dlopen lt_cv_dlopen_libs=-lsvld
else
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for dld_link in -ldld" >&5
$as_echo_n "checking for dld_link in -ldld... " >&6; }
@@ -11159,7 +12664,7 @@
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dld_dld_link" >&5
$as_echo "$ac_cv_lib_dld_dld_link" >&6; }
if test "x$ac_cv_lib_dld_dld_link" = xyes; then :
- lt_cv_dlopen="dld_link" lt_cv_dlopen_libs="-ldld"
+ lt_cv_dlopen=dld_link lt_cv_dlopen_libs=-ldld
fi
@@ -11180,21 +12685,21 @@
;;
esac
- if test "x$lt_cv_dlopen" != xno; then
+ if test no = "$lt_cv_dlopen"; then
+ enable_dlopen=no
+ else
enable_dlopen=yes
- else
- enable_dlopen=no
fi
case $lt_cv_dlopen in
dlopen)
- save_CPPFLAGS="$CPPFLAGS"
- test "x$ac_cv_header_dlfcn_h" = xyes && CPPFLAGS="$CPPFLAGS -DHAVE_DLFCN_H"
+ save_CPPFLAGS=$CPPFLAGS
+ test yes = "$ac_cv_header_dlfcn_h" && CPPFLAGS="$CPPFLAGS -DHAVE_DLFCN_H"
- save_LDFLAGS="$LDFLAGS"
+ save_LDFLAGS=$LDFLAGS
wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $export_dynamic_flag_spec\"
- save_LIBS="$LIBS"
+ save_LIBS=$LIBS
LIBS="$lt_cv_dlopen_libs $LIBS"
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether a program can dlopen itself" >&5
@@ -11202,13 +12707,13 @@
if ${lt_cv_dlopen_self+:} false; then :
$as_echo_n "(cached) " >&6
else
- if test "$cross_compiling" = yes; then :
+ if test yes = "$cross_compiling"; then :
lt_cv_dlopen_self=cross
else
lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
lt_status=$lt_dlunknown
cat > conftest.$ac_ext <<_LT_EOF
-#line 11211 "configure"
+#line $LINENO "configure"
#include "confdefs.h"
#if HAVE_DLFCN_H
@@ -11249,7 +12754,13 @@
# endif
#endif
-void fnord() { int i=42;}
+/* When -fvisibility=hidden is used, assume the code has been annotated
+ correspondingly for the symbols needed. */
+#if defined __GNUC__ && (((__GNUC__ == 3) && (__GNUC_MINOR__ >= 3)) || (__GNUC__ > 3))
+int fnord () __attribute__((visibility("default")));
+#endif
+
+int fnord () { return 42; }
int main ()
{
void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW);
@@ -11258,7 +12769,11 @@
if (self)
{
if (dlsym (self,"fnord")) status = $lt_dlno_uscore;
- else if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore;
+ else
+ {
+ if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore;
+ else puts (dlerror ());
+ }
/* dlclose (self); */
}
else
@@ -11271,7 +12786,7 @@
(eval $ac_link) 2>&5
ac_status=$?
$as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
- test $ac_status = 0; } && test -s conftest${ac_exeext} 2>/dev/null; then
+ test $ac_status = 0; } && test -s "conftest$ac_exeext" 2>/dev/null; then
(./conftest; exit; ) >&5 2>/dev/null
lt_status=$?
case x$lt_status in
@@ -11291,7 +12806,7 @@
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_dlopen_self" >&5
$as_echo "$lt_cv_dlopen_self" >&6; }
- if test "x$lt_cv_dlopen_self" = xyes; then
+ if test yes = "$lt_cv_dlopen_self"; then
wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $lt_prog_compiler_static\"
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether a statically linked program can dlopen itself" >&5
$as_echo_n "checking whether a statically linked program can dlopen itself... " >&6; }
@@ -11298,13 +12813,13 @@
if ${lt_cv_dlopen_self_static+:} false; then :
$as_echo_n "(cached) " >&6
else
- if test "$cross_compiling" = yes; then :
+ if test yes = "$cross_compiling"; then :
lt_cv_dlopen_self_static=cross
else
lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
lt_status=$lt_dlunknown
cat > conftest.$ac_ext <<_LT_EOF
-#line 11307 "configure"
+#line $LINENO "configure"
#include "confdefs.h"
#if HAVE_DLFCN_H
@@ -11345,7 +12860,13 @@
# endif
#endif
-void fnord() { int i=42;}
+/* When -fvisibility=hidden is used, assume the code has been annotated
+ correspondingly for the symbols needed. */
+#if defined __GNUC__ && (((__GNUC__ == 3) && (__GNUC_MINOR__ >= 3)) || (__GNUC__ > 3))
+int fnord () __attribute__((visibility("default")));
+#endif
+
+int fnord () { return 42; }
int main ()
{
void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW);
@@ -11354,7 +12875,11 @@
if (self)
{
if (dlsym (self,"fnord")) status = $lt_dlno_uscore;
- else if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore;
+ else
+ {
+ if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore;
+ else puts (dlerror ());
+ }
/* dlclose (self); */
}
else
@@ -11367,7 +12892,7 @@
(eval $ac_link) 2>&5
ac_status=$?
$as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
- test $ac_status = 0; } && test -s conftest${ac_exeext} 2>/dev/null; then
+ test $ac_status = 0; } && test -s "conftest$ac_exeext" 2>/dev/null; then
(./conftest; exit; ) >&5 2>/dev/null
lt_status=$?
case x$lt_status in
@@ -11388,9 +12913,9 @@
$as_echo "$lt_cv_dlopen_self_static" >&6; }
fi
- CPPFLAGS="$save_CPPFLAGS"
- LDFLAGS="$save_LDFLAGS"
- LIBS="$save_LIBS"
+ CPPFLAGS=$save_CPPFLAGS
+ LDFLAGS=$save_LDFLAGS
+ LIBS=$save_LIBS
;;
esac
@@ -11434,7 +12959,7 @@
# FIXME - insert some real tests, host_os isn't really good enough
case $host_os in
darwin*)
- if test -n "$STRIP" ; then
+ if test -n "$STRIP"; then
striplib="$STRIP -x"
old_striplib="$STRIP -S"
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
@@ -11462,7 +12987,7 @@
- # Report which library types will actually be built
+ # Report what library types will actually be built
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if libtool supports shared libraries" >&5
$as_echo_n "checking if libtool supports shared libraries... " >&6; }
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $can_build_shared" >&5
@@ -11470,13 +12995,13 @@
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to build shared libraries" >&5
$as_echo_n "checking whether to build shared libraries... " >&6; }
- test "$can_build_shared" = "no" && enable_shared=no
+ test no = "$can_build_shared" && enable_shared=no
# On AIX, shared libraries and static libraries use the same namespace, and
# are all built from PIC.
case $host_os in
aix3*)
- test "$enable_shared" = yes && enable_static=no
+ test yes = "$enable_shared" && enable_static=no
if test -n "$RANLIB"; then
archive_cmds="$archive_cmds~\$RANLIB \$lib"
postinstall_cmds='$RANLIB $lib'
@@ -11484,8 +13009,12 @@
;;
aix[4-9]*)
- if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then
- test "$enable_shared" = yes && enable_static=no
+ if test ia64 != "$host_cpu"; then
+ case $enable_shared,$with_aix_soname,$aix_use_runtimelinking in
+ yes,aix,yes) ;; # shared object as lib.so file only
+ yes,svr4,*) ;; # shared object as lib.so archive member only
+ yes,*) enable_static=no ;; # shared object in lib.a archive as well
+ esac
fi
;;
esac
@@ -11495,7 +13024,7 @@
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to build static libraries" >&5
$as_echo_n "checking whether to build static libraries... " >&6; }
# Make sure either enable_shared or enable_static is yes.
- test "$enable_shared" = yes || enable_static=yes
+ test yes = "$enable_shared" || enable_static=yes
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $enable_static" >&5
$as_echo "$enable_static" >&6; }
@@ -11509,7 +13038,7 @@
ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
ac_compiler_gnu=$ac_cv_c_compiler_gnu
-CC="$lt_save_CC"
+CC=$lt_save_CC
@@ -11523,6 +13052,8 @@
+
+
ac_config_commands="$ac_config_commands libtool"
@@ -12907,7 +14438,7 @@
done
-for ac_func in strcasecmp strndup
+for ac_func in strcasecmp strnlen strndup
do :
as_ac_var=`$as_echo "ac_cv_func_$ac_func" | $as_tr_sh`
ac_fn_c_check_func "$LINENO" "$ac_func" "$as_ac_var"
@@ -12975,7 +14506,8 @@
fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking size of short" >&5
+if test "xno" = "x$ac_cv_header_stdint_h" ; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking size of short" >&5
$as_echo_n "checking size of short... " >&6; }
if ${ac_cv_sizeof_short+:} false; then :
$as_echo_n "(cached) " >&6
@@ -13015,7 +14547,7 @@
_ACEOF
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking size of int" >&5
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking size of int" >&5
$as_echo_n "checking size of int... " >&6; }
if ${ac_cv_sizeof_int+:} false; then :
$as_echo_n "(cached) " >&6
@@ -13055,7 +14587,7 @@
_ACEOF
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking size of long" >&5
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking size of long" >&5
$as_echo_n "checking size of long... " >&6; }
if ${ac_cv_sizeof_long+:} false; then :
$as_echo_n "(cached) " >&6
@@ -13095,6 +14627,47 @@
_ACEOF
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking size of int *" >&5
+$as_echo_n "checking size of int *... " >&6; }
+if ${ac_cv_sizeof_int_p+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ for ac_size in 4 8 1 2 16 ; do # List sizes in rough order of prevalence.
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+#include "confdefs.h"
+#include <sys/types.h>
+
+
+int
+main ()
+{
+switch (0) case 0: case (sizeof (int *) == $ac_size):;
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+ ac_cv_sizeof_int_p=$ac_size
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+ if test x$ac_cv_sizeof_int_p != x ; then break; fi
+done
+
+fi
+
+if test x$ac_cv_sizeof_int_p = x ; then
+ as_fn_error $? "cannot determine a size for int *" "$LINENO" 5
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_sizeof_int_p" >&5
+$as_echo "$ac_cv_sizeof_int_p" >&6; }
+
+cat >>confdefs.h <<_ACEOF
+#define SIZEOF_INT_P $ac_cv_sizeof_int_p
+_ACEOF
+
+
+fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether byte ordering is bigendian" >&5
$as_echo_n "checking whether byte ordering is bigendian... " >&6; }
if ${ac_cv_c_bigendian+:} false; then :
@@ -13802,6 +15375,33 @@
fi
+
+# ----------------------------------------------------------------
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether using address sanitizer" >&5
+$as_echo_n "checking whether using address sanitizer... " >&6; }
+
+# Check whether --with-asan was given.
+if test "${with_asan+set}" = set; then :
+ withval=$with_asan; case "${withval}" in
+ yes|no) with_asan="$withval" ;;
+ *) { $as_echo "$as_me:${as_lineno-$LINENO}: result: oops" >&5
+$as_echo "oops" >&6; }
+ as_fn_error $? "bad value ${withval} for --with-asan" "$LINENO" 5 ;;
+ esac
+else
+ with_asan="no"
+fi
+
+ASAN_LIBS=""
+ASAN_CFLAGS=""
+if test ".$with_asan" = ".yes" ; then
+ ASAN_LIBS="-lasan"
+ ASAN_CFLAGS="-fsanitize=address"
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $with_asan, $ASAN_CFLAGS" >&5
+$as_echo "$with_asan, $ASAN_CFLAGS" >&6; }
+
+
# ---------------------------------------------------------------
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking running extra tests on make check" >&5
$as_echo_n "checking running extra tests on make check... " >&6; }
@@ -13895,6 +15495,10 @@
enableval=$enable_frame_pointer;
fi
+if test ".$enable_frame_pointer" = "."; then
+ case ".$enable_debug" in .|.no|.no,*) : ;; *) enable_frame_pointer="$enable_debug" ;; esac
+ case ".$with_debug" in .|.no|.no,*) : ;; *) enable_frame_pointer="$with_debug" ;; esac
+fi
case ".$enable_frame_pointer" in
.|.no|.no,*) test ".$enable_frame_pointer" = "." && enable_frame_pointer="no"
CFLAGS=`echo " $CFLAGS " | sed -e 's/ -g / /'`
@@ -15755,133 +17359,163 @@
sed_quote_subst='$sed_quote_subst'
double_quote_subst='$double_quote_subst'
delay_variable_subst='$delay_variable_subst'
-AS='`$ECHO "X$AS" | $Xsed -e "$delay_single_quote_subst"`'
-DLLTOOL='`$ECHO "X$DLLTOOL" | $Xsed -e "$delay_single_quote_subst"`'
-OBJDUMP='`$ECHO "X$OBJDUMP" | $Xsed -e "$delay_single_quote_subst"`'
-macro_version='`$ECHO "X$macro_version" | $Xsed -e "$delay_single_quote_subst"`'
-macro_revision='`$ECHO "X$macro_revision" | $Xsed -e "$delay_single_quote_subst"`'
-enable_shared='`$ECHO "X$enable_shared" | $Xsed -e "$delay_single_quote_subst"`'
-enable_static='`$ECHO "X$enable_static" | $Xsed -e "$delay_single_quote_subst"`'
-pic_mode='`$ECHO "X$pic_mode" | $Xsed -e "$delay_single_quote_subst"`'
-enable_fast_install='`$ECHO "X$enable_fast_install" | $Xsed -e "$delay_single_quote_subst"`'
-host_alias='`$ECHO "X$host_alias" | $Xsed -e "$delay_single_quote_subst"`'
-host='`$ECHO "X$host" | $Xsed -e "$delay_single_quote_subst"`'
-host_os='`$ECHO "X$host_os" | $Xsed -e "$delay_single_quote_subst"`'
-build_alias='`$ECHO "X$build_alias" | $Xsed -e "$delay_single_quote_subst"`'
-build='`$ECHO "X$build" | $Xsed -e "$delay_single_quote_subst"`'
-build_os='`$ECHO "X$build_os" | $Xsed -e "$delay_single_quote_subst"`'
-SED='`$ECHO "X$SED" | $Xsed -e "$delay_single_quote_subst"`'
-Xsed='`$ECHO "X$Xsed" | $Xsed -e "$delay_single_quote_subst"`'
-GREP='`$ECHO "X$GREP" | $Xsed -e "$delay_single_quote_subst"`'
-EGREP='`$ECHO "X$EGREP" | $Xsed -e "$delay_single_quote_subst"`'
-FGREP='`$ECHO "X$FGREP" | $Xsed -e "$delay_single_quote_subst"`'
-LD='`$ECHO "X$LD" | $Xsed -e "$delay_single_quote_subst"`'
-NM='`$ECHO "X$NM" | $Xsed -e "$delay_single_quote_subst"`'
-LN_S='`$ECHO "X$LN_S" | $Xsed -e "$delay_single_quote_subst"`'
-max_cmd_len='`$ECHO "X$max_cmd_len" | $Xsed -e "$delay_single_quote_subst"`'
-ac_objext='`$ECHO "X$ac_objext" | $Xsed -e "$delay_single_quote_subst"`'
-exeext='`$ECHO "X$exeext" | $Xsed -e "$delay_single_quote_subst"`'
-lt_unset='`$ECHO "X$lt_unset" | $Xsed -e "$delay_single_quote_subst"`'
-lt_SP2NL='`$ECHO "X$lt_SP2NL" | $Xsed -e "$delay_single_quote_subst"`'
-lt_NL2SP='`$ECHO "X$lt_NL2SP" | $Xsed -e "$delay_single_quote_subst"`'
-reload_flag='`$ECHO "X$reload_flag" | $Xsed -e "$delay_single_quote_subst"`'
-reload_cmds='`$ECHO "X$reload_cmds" | $Xsed -e "$delay_single_quote_subst"`'
-deplibs_check_method='`$ECHO "X$deplibs_check_method" | $Xsed -e "$delay_single_quote_subst"`'
-file_magic_cmd='`$ECHO "X$file_magic_cmd" | $Xsed -e "$delay_single_quote_subst"`'
-AR='`$ECHO "X$AR" | $Xsed -e "$delay_single_quote_subst"`'
-AR_FLAGS='`$ECHO "X$AR_FLAGS" | $Xsed -e "$delay_single_quote_subst"`'
-STRIP='`$ECHO "X$STRIP" | $Xsed -e "$delay_single_quote_subst"`'
-RANLIB='`$ECHO "X$RANLIB" | $Xsed -e "$delay_single_quote_subst"`'
-old_postinstall_cmds='`$ECHO "X$old_postinstall_cmds" | $Xsed -e "$delay_single_quote_subst"`'
-old_postuninstall_cmds='`$ECHO "X$old_postuninstall_cmds" | $Xsed -e "$delay_single_quote_subst"`'
-old_archive_cmds='`$ECHO "X$old_archive_cmds" | $Xsed -e "$delay_single_quote_subst"`'
-CC='`$ECHO "X$CC" | $Xsed -e "$delay_single_quote_subst"`'
-CFLAGS='`$ECHO "X$CFLAGS" | $Xsed -e "$delay_single_quote_subst"`'
-compiler='`$ECHO "X$compiler" | $Xsed -e "$delay_single_quote_subst"`'
-GCC='`$ECHO "X$GCC" | $Xsed -e "$delay_single_quote_subst"`'
-lt_cv_sys_global_symbol_pipe='`$ECHO "X$lt_cv_sys_global_symbol_pipe" | $Xsed -e "$delay_single_quote_subst"`'
-lt_cv_sys_global_symbol_to_cdecl='`$ECHO "X$lt_cv_sys_global_symbol_to_cdecl" | $Xsed -e "$delay_single_quote_subst"`'
-lt_cv_sys_global_symbol_to_c_name_address='`$ECHO "X$lt_cv_sys_global_symbol_to_c_name_address" | $Xsed -e "$delay_single_quote_subst"`'
-lt_cv_sys_global_symbol_to_c_name_address_lib_prefix='`$ECHO "X$lt_cv_sys_global_symbol_to_c_name_address_lib_prefix" | $Xsed -e "$delay_single_quote_subst"`'
-objdir='`$ECHO "X$objdir" | $Xsed -e "$delay_single_quote_subst"`'
-SHELL='`$ECHO "X$SHELL" | $Xsed -e "$delay_single_quote_subst"`'
-ECHO='`$ECHO "X$ECHO" | $Xsed -e "$delay_single_quote_subst"`'
-MAGIC_CMD='`$ECHO "X$MAGIC_CMD" | $Xsed -e "$delay_single_quote_subst"`'
-lt_prog_compiler_no_builtin_flag='`$ECHO "X$lt_prog_compiler_no_builtin_flag" | $Xsed -e "$delay_single_quote_subst"`'
-lt_prog_compiler_wl='`$ECHO "X$lt_prog_compiler_wl" | $Xsed -e "$delay_single_quote_subst"`'
-lt_prog_compiler_pic='`$ECHO "X$lt_prog_compiler_pic" | $Xsed -e "$delay_single_quote_subst"`'
-lt_prog_compiler_static='`$ECHO "X$lt_prog_compiler_static" | $Xsed -e "$delay_single_quote_subst"`'
-lt_cv_prog_compiler_c_o='`$ECHO "X$lt_cv_prog_compiler_c_o" | $Xsed -e "$delay_single_quote_subst"`'
-need_locks='`$ECHO "X$need_locks" | $Xsed -e "$delay_single_quote_subst"`'
-DSYMUTIL='`$ECHO "X$DSYMUTIL" | $Xsed -e "$delay_single_quote_subst"`'
-NMEDIT='`$ECHO "X$NMEDIT" | $Xsed -e "$delay_single_quote_subst"`'
-LIPO='`$ECHO "X$LIPO" | $Xsed -e "$delay_single_quote_subst"`'
-OTOOL='`$ECHO "X$OTOOL" | $Xsed -e "$delay_single_quote_subst"`'
-OTOOL64='`$ECHO "X$OTOOL64" | $Xsed -e "$delay_single_quote_subst"`'
-libext='`$ECHO "X$libext" | $Xsed -e "$delay_single_quote_subst"`'
-shrext_cmds='`$ECHO "X$shrext_cmds" | $Xsed -e "$delay_single_quote_subst"`'
-extract_expsyms_cmds='`$ECHO "X$extract_expsyms_cmds" | $Xsed -e "$delay_single_quote_subst"`'
-archive_cmds_need_lc='`$ECHO "X$archive_cmds_need_lc" | $Xsed -e "$delay_single_quote_subst"`'
-enable_shared_with_static_runtimes='`$ECHO "X$enable_shared_with_static_runtimes" | $Xsed -e "$delay_single_quote_subst"`'
-export_dynamic_flag_spec='`$ECHO "X$export_dynamic_flag_spec" | $Xsed -e "$delay_single_quote_subst"`'
-whole_archive_flag_spec='`$ECHO "X$whole_archive_flag_spec" | $Xsed -e "$delay_single_quote_subst"`'
-compiler_needs_object='`$ECHO "X$compiler_needs_object" | $Xsed -e "$delay_single_quote_subst"`'
-old_archive_from_new_cmds='`$ECHO "X$old_archive_from_new_cmds" | $Xsed -e "$delay_single_quote_subst"`'
-old_archive_from_expsyms_cmds='`$ECHO "X$old_archive_from_expsyms_cmds" | $Xsed -e "$delay_single_quote_subst"`'
-archive_cmds='`$ECHO "X$archive_cmds" | $Xsed -e "$delay_single_quote_subst"`'
-archive_expsym_cmds='`$ECHO "X$archive_expsym_cmds" | $Xsed -e "$delay_single_quote_subst"`'
-module_cmds='`$ECHO "X$module_cmds" | $Xsed -e "$delay_single_quote_subst"`'
-module_expsym_cmds='`$ECHO "X$module_expsym_cmds" | $Xsed -e "$delay_single_quote_subst"`'
-with_gnu_ld='`$ECHO "X$with_gnu_ld" | $Xsed -e "$delay_single_quote_subst"`'
-allow_undefined_flag='`$ECHO "X$allow_undefined_flag" | $Xsed -e "$delay_single_quote_subst"`'
-no_undefined_flag='`$ECHO "X$no_undefined_flag" | $Xsed -e "$delay_single_quote_subst"`'
-hardcode_libdir_flag_spec='`$ECHO "X$hardcode_libdir_flag_spec" | $Xsed -e "$delay_single_quote_subst"`'
-hardcode_libdir_flag_spec_ld='`$ECHO "X$hardcode_libdir_flag_spec_ld" | $Xsed -e "$delay_single_quote_subst"`'
-hardcode_libdir_separator='`$ECHO "X$hardcode_libdir_separator" | $Xsed -e "$delay_single_quote_subst"`'
-hardcode_direct='`$ECHO "X$hardcode_direct" | $Xsed -e "$delay_single_quote_subst"`'
-hardcode_direct_absolute='`$ECHO "X$hardcode_direct_absolute" | $Xsed -e "$delay_single_quote_subst"`'
-hardcode_minus_L='`$ECHO "X$hardcode_minus_L" | $Xsed -e "$delay_single_quote_subst"`'
-hardcode_shlibpath_var='`$ECHO "X$hardcode_shlibpath_var" | $Xsed -e "$delay_single_quote_subst"`'
-hardcode_automatic='`$ECHO "X$hardcode_automatic" | $Xsed -e "$delay_single_quote_subst"`'
-inherit_rpath='`$ECHO "X$inherit_rpath" | $Xsed -e "$delay_single_quote_subst"`'
-link_all_deplibs='`$ECHO "X$link_all_deplibs" | $Xsed -e "$delay_single_quote_subst"`'
-fix_srcfile_path='`$ECHO "X$fix_srcfile_path" | $Xsed -e "$delay_single_quote_subst"`'
-always_export_symbols='`$ECHO "X$always_export_symbols" | $Xsed -e "$delay_single_quote_subst"`'
-export_symbols_cmds='`$ECHO "X$export_symbols_cmds" | $Xsed -e "$delay_single_quote_subst"`'
-exclude_expsyms='`$ECHO "X$exclude_expsyms" | $Xsed -e "$delay_single_quote_subst"`'
-include_expsyms='`$ECHO "X$include_expsyms" | $Xsed -e "$delay_single_quote_subst"`'
-prelink_cmds='`$ECHO "X$prelink_cmds" | $Xsed -e "$delay_single_quote_subst"`'
-file_list_spec='`$ECHO "X$file_list_spec" | $Xsed -e "$delay_single_quote_subst"`'
-variables_saved_for_relink='`$ECHO "X$variables_saved_for_relink" | $Xsed -e "$delay_single_quote_subst"`'
-need_lib_prefix='`$ECHO "X$need_lib_prefix" | $Xsed -e "$delay_single_quote_subst"`'
-need_version='`$ECHO "X$need_version" | $Xsed -e "$delay_single_quote_subst"`'
-version_type='`$ECHO "X$version_type" | $Xsed -e "$delay_single_quote_subst"`'
-runpath_var='`$ECHO "X$runpath_var" | $Xsed -e "$delay_single_quote_subst"`'
-shlibpath_var='`$ECHO "X$shlibpath_var" | $Xsed -e "$delay_single_quote_subst"`'
-shlibpath_overrides_runpath='`$ECHO "X$shlibpath_overrides_runpath" | $Xsed -e "$delay_single_quote_subst"`'
-libname_spec='`$ECHO "X$libname_spec" | $Xsed -e "$delay_single_quote_subst"`'
-library_names_spec='`$ECHO "X$library_names_spec" | $Xsed -e "$delay_single_quote_subst"`'
-soname_spec='`$ECHO "X$soname_spec" | $Xsed -e "$delay_single_quote_subst"`'
-postinstall_cmds='`$ECHO "X$postinstall_cmds" | $Xsed -e "$delay_single_quote_subst"`'
-postuninstall_cmds='`$ECHO "X$postuninstall_cmds" | $Xsed -e "$delay_single_quote_subst"`'
-finish_cmds='`$ECHO "X$finish_cmds" | $Xsed -e "$delay_single_quote_subst"`'
-finish_eval='`$ECHO "X$finish_eval" | $Xsed -e "$delay_single_quote_subst"`'
-hardcode_into_libs='`$ECHO "X$hardcode_into_libs" | $Xsed -e "$delay_single_quote_subst"`'
-sys_lib_search_path_spec='`$ECHO "X$sys_lib_search_path_spec" | $Xsed -e "$delay_single_quote_subst"`'
-sys_lib_dlsearch_path_spec='`$ECHO "X$sys_lib_dlsearch_path_spec" | $Xsed -e "$delay_single_quote_subst"`'
-hardcode_action='`$ECHO "X$hardcode_action" | $Xsed -e "$delay_single_quote_subst"`'
-enable_dlopen='`$ECHO "X$enable_dlopen" | $Xsed -e "$delay_single_quote_subst"`'
-enable_dlopen_self='`$ECHO "X$enable_dlopen_self" | $Xsed -e "$delay_single_quote_subst"`'
-enable_dlopen_self_static='`$ECHO "X$enable_dlopen_self_static" | $Xsed -e "$delay_single_quote_subst"`'
-old_striplib='`$ECHO "X$old_striplib" | $Xsed -e "$delay_single_quote_subst"`'
-striplib='`$ECHO "X$striplib" | $Xsed -e "$delay_single_quote_subst"`'
+AS='`$ECHO "$AS" | $SED "$delay_single_quote_subst"`'
+DLLTOOL='`$ECHO "$DLLTOOL" | $SED "$delay_single_quote_subst"`'
+OBJDUMP='`$ECHO "$OBJDUMP" | $SED "$delay_single_quote_subst"`'
+macro_version='`$ECHO "$macro_version" | $SED "$delay_single_quote_subst"`'
+macro_revision='`$ECHO "$macro_revision" | $SED "$delay_single_quote_subst"`'
+enable_shared='`$ECHO "$enable_shared" | $SED "$delay_single_quote_subst"`'
+enable_static='`$ECHO "$enable_static" | $SED "$delay_single_quote_subst"`'
+pic_mode='`$ECHO "$pic_mode" | $SED "$delay_single_quote_subst"`'
+enable_fast_install='`$ECHO "$enable_fast_install" | $SED "$delay_single_quote_subst"`'
+shared_archive_member_spec='`$ECHO "$shared_archive_member_spec" | $SED "$delay_single_quote_subst"`'
+SHELL='`$ECHO "$SHELL" | $SED "$delay_single_quote_subst"`'
+ECHO='`$ECHO "$ECHO" | $SED "$delay_single_quote_subst"`'
+PATH_SEPARATOR='`$ECHO "$PATH_SEPARATOR" | $SED "$delay_single_quote_subst"`'
+host_alias='`$ECHO "$host_alias" | $SED "$delay_single_quote_subst"`'
+host='`$ECHO "$host" | $SED "$delay_single_quote_subst"`'
+host_os='`$ECHO "$host_os" | $SED "$delay_single_quote_subst"`'
+build_alias='`$ECHO "$build_alias" | $SED "$delay_single_quote_subst"`'
+build='`$ECHO "$build" | $SED "$delay_single_quote_subst"`'
+build_os='`$ECHO "$build_os" | $SED "$delay_single_quote_subst"`'
+SED='`$ECHO "$SED" | $SED "$delay_single_quote_subst"`'
+Xsed='`$ECHO "$Xsed" | $SED "$delay_single_quote_subst"`'
+GREP='`$ECHO "$GREP" | $SED "$delay_single_quote_subst"`'
+EGREP='`$ECHO "$EGREP" | $SED "$delay_single_quote_subst"`'
+FGREP='`$ECHO "$FGREP" | $SED "$delay_single_quote_subst"`'
+LD='`$ECHO "$LD" | $SED "$delay_single_quote_subst"`'
+NM='`$ECHO "$NM" | $SED "$delay_single_quote_subst"`'
+LN_S='`$ECHO "$LN_S" | $SED "$delay_single_quote_subst"`'
+max_cmd_len='`$ECHO "$max_cmd_len" | $SED "$delay_single_quote_subst"`'
+ac_objext='`$ECHO "$ac_objext" | $SED "$delay_single_quote_subst"`'
+exeext='`$ECHO "$exeext" | $SED "$delay_single_quote_subst"`'
+lt_unset='`$ECHO "$lt_unset" | $SED "$delay_single_quote_subst"`'
+lt_SP2NL='`$ECHO "$lt_SP2NL" | $SED "$delay_single_quote_subst"`'
+lt_NL2SP='`$ECHO "$lt_NL2SP" | $SED "$delay_single_quote_subst"`'
+lt_cv_to_host_file_cmd='`$ECHO "$lt_cv_to_host_file_cmd" | $SED "$delay_single_quote_subst"`'
+lt_cv_to_tool_file_cmd='`$ECHO "$lt_cv_to_tool_file_cmd" | $SED "$delay_single_quote_subst"`'
+reload_flag='`$ECHO "$reload_flag" | $SED "$delay_single_quote_subst"`'
+reload_cmds='`$ECHO "$reload_cmds" | $SED "$delay_single_quote_subst"`'
+deplibs_check_method='`$ECHO "$deplibs_check_method" | $SED "$delay_single_quote_subst"`'
+file_magic_cmd='`$ECHO "$file_magic_cmd" | $SED "$delay_single_quote_subst"`'
+file_magic_glob='`$ECHO "$file_magic_glob" | $SED "$delay_single_quote_subst"`'
+want_nocaseglob='`$ECHO "$want_nocaseglob" | $SED "$delay_single_quote_subst"`'
+sharedlib_from_linklib_cmd='`$ECHO "$sharedlib_from_linklib_cmd" | $SED "$delay_single_quote_subst"`'
+AR='`$ECHO "$AR" | $SED "$delay_single_quote_subst"`'
+AR_FLAGS='`$ECHO "$AR_FLAGS" | $SED "$delay_single_quote_subst"`'
+archiver_list_spec='`$ECHO "$archiver_list_spec" | $SED "$delay_single_quote_subst"`'
+STRIP='`$ECHO "$STRIP" | $SED "$delay_single_quote_subst"`'
+RANLIB='`$ECHO "$RANLIB" | $SED "$delay_single_quote_subst"`'
+old_postinstall_cmds='`$ECHO "$old_postinstall_cmds" | $SED "$delay_single_quote_subst"`'
+old_postuninstall_cmds='`$ECHO "$old_postuninstall_cmds" | $SED "$delay_single_quote_subst"`'
+old_archive_cmds='`$ECHO "$old_archive_cmds" | $SED "$delay_single_quote_subst"`'
+lock_old_archive_extraction='`$ECHO "$lock_old_archive_extraction" | $SED "$delay_single_quote_subst"`'
+CC='`$ECHO "$CC" | $SED "$delay_single_quote_subst"`'
+CFLAGS='`$ECHO "$CFLAGS" | $SED "$delay_single_quote_subst"`'
+compiler='`$ECHO "$compiler" | $SED "$delay_single_quote_subst"`'
+GCC='`$ECHO "$GCC" | $SED "$delay_single_quote_subst"`'
+lt_cv_sys_global_symbol_pipe='`$ECHO "$lt_cv_sys_global_symbol_pipe" | $SED "$delay_single_quote_subst"`'
+lt_cv_sys_global_symbol_to_cdecl='`$ECHO "$lt_cv_sys_global_symbol_to_cdecl" | $SED "$delay_single_quote_subst"`'
+lt_cv_sys_global_symbol_to_import='`$ECHO "$lt_cv_sys_global_symbol_to_import" | $SED "$delay_single_quote_subst"`'
+lt_cv_sys_global_symbol_to_c_name_address='`$ECHO "$lt_cv_sys_global_symbol_to_c_name_address" | $SED "$delay_single_quote_subst"`'
+lt_cv_sys_global_symbol_to_c_name_address_lib_prefix='`$ECHO "$lt_cv_sys_global_symbol_to_c_name_address_lib_prefix" | $SED "$delay_single_quote_subst"`'
+lt_cv_nm_interface='`$ECHO "$lt_cv_nm_interface" | $SED "$delay_single_quote_subst"`'
+nm_file_list_spec='`$ECHO "$nm_file_list_spec" | $SED "$delay_single_quote_subst"`'
+lt_sysroot='`$ECHO "$lt_sysroot" | $SED "$delay_single_quote_subst"`'
+lt_cv_truncate_bin='`$ECHO "$lt_cv_truncate_bin" | $SED "$delay_single_quote_subst"`'
+objdir='`$ECHO "$objdir" | $SED "$delay_single_quote_subst"`'
+MAGIC_CMD='`$ECHO "$MAGIC_CMD" | $SED "$delay_single_quote_subst"`'
+lt_prog_compiler_no_builtin_flag='`$ECHO "$lt_prog_compiler_no_builtin_flag" | $SED "$delay_single_quote_subst"`'
+lt_prog_compiler_pic='`$ECHO "$lt_prog_compiler_pic" | $SED "$delay_single_quote_subst"`'
+lt_prog_compiler_wl='`$ECHO "$lt_prog_compiler_wl" | $SED "$delay_single_quote_subst"`'
+lt_prog_compiler_static='`$ECHO "$lt_prog_compiler_static" | $SED "$delay_single_quote_subst"`'
+lt_cv_prog_compiler_c_o='`$ECHO "$lt_cv_prog_compiler_c_o" | $SED "$delay_single_quote_subst"`'
+need_locks='`$ECHO "$need_locks" | $SED "$delay_single_quote_subst"`'
+MANIFEST_TOOL='`$ECHO "$MANIFEST_TOOL" | $SED "$delay_single_quote_subst"`'
+DSYMUTIL='`$ECHO "$DSYMUTIL" | $SED "$delay_single_quote_subst"`'
+NMEDIT='`$ECHO "$NMEDIT" | $SED "$delay_single_quote_subst"`'
+LIPO='`$ECHO "$LIPO" | $SED "$delay_single_quote_subst"`'
+OTOOL='`$ECHO "$OTOOL" | $SED "$delay_single_quote_subst"`'
+OTOOL64='`$ECHO "$OTOOL64" | $SED "$delay_single_quote_subst"`'
+libext='`$ECHO "$libext" | $SED "$delay_single_quote_subst"`'
+shrext_cmds='`$ECHO "$shrext_cmds" | $SED "$delay_single_quote_subst"`'
+extract_expsyms_cmds='`$ECHO "$extract_expsyms_cmds" | $SED "$delay_single_quote_subst"`'
+archive_cmds_need_lc='`$ECHO "$archive_cmds_need_lc" | $SED "$delay_single_quote_subst"`'
+enable_shared_with_static_runtimes='`$ECHO "$enable_shared_with_static_runtimes" | $SED "$delay_single_quote_subst"`'
+export_dynamic_flag_spec='`$ECHO "$export_dynamic_flag_spec" | $SED "$delay_single_quote_subst"`'
+whole_archive_flag_spec='`$ECHO "$whole_archive_flag_spec" | $SED "$delay_single_quote_subst"`'
+compiler_needs_object='`$ECHO "$compiler_needs_object" | $SED "$delay_single_quote_subst"`'
+old_archive_from_new_cmds='`$ECHO "$old_archive_from_new_cmds" | $SED "$delay_single_quote_subst"`'
+old_archive_from_expsyms_cmds='`$ECHO "$old_archive_from_expsyms_cmds" | $SED "$delay_single_quote_subst"`'
+archive_cmds='`$ECHO "$archive_cmds" | $SED "$delay_single_quote_subst"`'
+archive_expsym_cmds='`$ECHO "$archive_expsym_cmds" | $SED "$delay_single_quote_subst"`'
+module_cmds='`$ECHO "$module_cmds" | $SED "$delay_single_quote_subst"`'
+module_expsym_cmds='`$ECHO "$module_expsym_cmds" | $SED "$delay_single_quote_subst"`'
+with_gnu_ld='`$ECHO "$with_gnu_ld" | $SED "$delay_single_quote_subst"`'
+allow_undefined_flag='`$ECHO "$allow_undefined_flag" | $SED "$delay_single_quote_subst"`'
+no_undefined_flag='`$ECHO "$no_undefined_flag" | $SED "$delay_single_quote_subst"`'
+hardcode_libdir_flag_spec='`$ECHO "$hardcode_libdir_flag_spec" | $SED "$delay_single_quote_subst"`'
+hardcode_libdir_separator='`$ECHO "$hardcode_libdir_separator" | $SED "$delay_single_quote_subst"`'
+hardcode_direct='`$ECHO "$hardcode_direct" | $SED "$delay_single_quote_subst"`'
+hardcode_direct_absolute='`$ECHO "$hardcode_direct_absolute" | $SED "$delay_single_quote_subst"`'
+hardcode_minus_L='`$ECHO "$hardcode_minus_L" | $SED "$delay_single_quote_subst"`'
+hardcode_shlibpath_var='`$ECHO "$hardcode_shlibpath_var" | $SED "$delay_single_quote_subst"`'
+hardcode_automatic='`$ECHO "$hardcode_automatic" | $SED "$delay_single_quote_subst"`'
+inherit_rpath='`$ECHO "$inherit_rpath" | $SED "$delay_single_quote_subst"`'
+link_all_deplibs='`$ECHO "$link_all_deplibs" | $SED "$delay_single_quote_subst"`'
+always_export_symbols='`$ECHO "$always_export_symbols" | $SED "$delay_single_quote_subst"`'
+export_symbols_cmds='`$ECHO "$export_symbols_cmds" | $SED "$delay_single_quote_subst"`'
+exclude_expsyms='`$ECHO "$exclude_expsyms" | $SED "$delay_single_quote_subst"`'
+include_expsyms='`$ECHO "$include_expsyms" | $SED "$delay_single_quote_subst"`'
+prelink_cmds='`$ECHO "$prelink_cmds" | $SED "$delay_single_quote_subst"`'
+postlink_cmds='`$ECHO "$postlink_cmds" | $SED "$delay_single_quote_subst"`'
+file_list_spec='`$ECHO "$file_list_spec" | $SED "$delay_single_quote_subst"`'
+variables_saved_for_relink='`$ECHO "$variables_saved_for_relink" | $SED "$delay_single_quote_subst"`'
+need_lib_prefix='`$ECHO "$need_lib_prefix" | $SED "$delay_single_quote_subst"`'
+need_version='`$ECHO "$need_version" | $SED "$delay_single_quote_subst"`'
+version_type='`$ECHO "$version_type" | $SED "$delay_single_quote_subst"`'
+runpath_var='`$ECHO "$runpath_var" | $SED "$delay_single_quote_subst"`'
+shlibpath_var='`$ECHO "$shlibpath_var" | $SED "$delay_single_quote_subst"`'
+shlibpath_overrides_runpath='`$ECHO "$shlibpath_overrides_runpath" | $SED "$delay_single_quote_subst"`'
+libname_spec='`$ECHO "$libname_spec" | $SED "$delay_single_quote_subst"`'
+library_names_spec='`$ECHO "$library_names_spec" | $SED "$delay_single_quote_subst"`'
+soname_spec='`$ECHO "$soname_spec" | $SED "$delay_single_quote_subst"`'
+install_override_mode='`$ECHO "$install_override_mode" | $SED "$delay_single_quote_subst"`'
+postinstall_cmds='`$ECHO "$postinstall_cmds" | $SED "$delay_single_quote_subst"`'
+postuninstall_cmds='`$ECHO "$postuninstall_cmds" | $SED "$delay_single_quote_subst"`'
+finish_cmds='`$ECHO "$finish_cmds" | $SED "$delay_single_quote_subst"`'
+finish_eval='`$ECHO "$finish_eval" | $SED "$delay_single_quote_subst"`'
+hardcode_into_libs='`$ECHO "$hardcode_into_libs" | $SED "$delay_single_quote_subst"`'
+sys_lib_search_path_spec='`$ECHO "$sys_lib_search_path_spec" | $SED "$delay_single_quote_subst"`'
+configure_time_dlsearch_path='`$ECHO "$configure_time_dlsearch_path" | $SED "$delay_single_quote_subst"`'
+configure_time_lt_sys_library_path='`$ECHO "$configure_time_lt_sys_library_path" | $SED "$delay_single_quote_subst"`'
+hardcode_action='`$ECHO "$hardcode_action" | $SED "$delay_single_quote_subst"`'
+enable_dlopen='`$ECHO "$enable_dlopen" | $SED "$delay_single_quote_subst"`'
+enable_dlopen_self='`$ECHO "$enable_dlopen_self" | $SED "$delay_single_quote_subst"`'
+enable_dlopen_self_static='`$ECHO "$enable_dlopen_self_static" | $SED "$delay_single_quote_subst"`'
+old_striplib='`$ECHO "$old_striplib" | $SED "$delay_single_quote_subst"`'
+striplib='`$ECHO "$striplib" | $SED "$delay_single_quote_subst"`'
LTCC='$LTCC'
LTCFLAGS='$LTCFLAGS'
compiler='$compiler_DEFAULT'
+# A function that is used when there is no print builtin or printf.
+func_fallback_echo ()
+{
+ eval 'cat <<_LTECHO_EOF
+\$1
+_LTECHO_EOF'
+}
+
# Quote evaled strings.
-for var in SED \
+for var in AS \
+DLLTOOL \
+OBJDUMP \
+SHELL \
+ECHO \
+PATH_SEPARATOR \
+SED \
GREP \
EGREP \
FGREP \
@@ -15893,8 +17527,12 @@
reload_flag \
deplibs_check_method \
file_magic_cmd \
+file_magic_glob \
+want_nocaseglob \
+sharedlib_from_linklib_cmd \
AR \
AR_FLAGS \
+archiver_list_spec \
STRIP \
RANLIB \
CC \
@@ -15902,16 +17540,19 @@
compiler \
lt_cv_sys_global_symbol_pipe \
lt_cv_sys_global_symbol_to_cdecl \
+lt_cv_sys_global_symbol_to_import \
lt_cv_sys_global_symbol_to_c_name_address \
lt_cv_sys_global_symbol_to_c_name_address_lib_prefix \
-SHELL \
-ECHO \
+lt_cv_nm_interface \
+nm_file_list_spec \
+lt_cv_truncate_bin \
lt_prog_compiler_no_builtin_flag \
+lt_prog_compiler_pic \
lt_prog_compiler_wl \
-lt_prog_compiler_pic \
lt_prog_compiler_static \
lt_cv_prog_compiler_c_o \
need_locks \
+MANIFEST_TOOL \
DSYMUTIL \
NMEDIT \
LIPO \
@@ -15925,9 +17566,7 @@
allow_undefined_flag \
no_undefined_flag \
hardcode_libdir_flag_spec \
-hardcode_libdir_flag_spec_ld \
hardcode_libdir_separator \
-fix_srcfile_path \
exclude_expsyms \
include_expsyms \
file_list_spec \
@@ -15935,12 +17574,13 @@
libname_spec \
library_names_spec \
soname_spec \
+install_override_mode \
finish_eval \
old_striplib \
striplib; do
- case \`eval \\\\\$ECHO "X\\\\\$\$var"\` in
+ case \`eval \\\\\$ECHO \\\\""\\\\\$\$var"\\\\"\` in
*[\\\\\\\`\\"\\\$]*)
- eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"X\\\$\$var\\" | \\\$Xsed -e \\"\\\$sed_quote_subst\\"\\\`\\\\\\""
+ eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"\\\$\$var\\" | \\\$SED \\"\\\$sed_quote_subst\\"\\\`\\\\\\"" ## exclude from sc_prohibit_nested_quotes
;;
*)
eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\""
@@ -15962,14 +17602,16 @@
module_expsym_cmds \
export_symbols_cmds \
prelink_cmds \
+postlink_cmds \
postinstall_cmds \
postuninstall_cmds \
finish_cmds \
sys_lib_search_path_spec \
-sys_lib_dlsearch_path_spec; do
- case \`eval \\\\\$ECHO "X\\\\\$\$var"\` in
+configure_time_dlsearch_path \
+configure_time_lt_sys_library_path; do
+ case \`eval \\\\\$ECHO \\\\""\\\\\$\$var"\\\\"\` in
*[\\\\\\\`\\"\\\$]*)
- eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"X\\\$\$var\\" | \\\$Xsed -e \\"\\\$double_quote_subst\\" -e \\"\\\$sed_quote_subst\\" -e \\"\\\$delay_variable_subst\\"\\\`\\\\\\""
+ eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"\\\$\$var\\" | \\\$SED -e \\"\\\$double_quote_subst\\" -e \\"\\\$sed_quote_subst\\" -e \\"\\\$delay_variable_subst\\"\\\`\\\\\\"" ## exclude from sc_prohibit_nested_quotes
;;
*)
eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\""
@@ -15977,19 +17619,11 @@
esac
done
-# Fix-up fallback echo if it was mangled by the above quoting rules.
-case \$lt_ECHO in
-*'\\\$0 --fallback-echo"') lt_ECHO=\`\$ECHO "X\$lt_ECHO" | \$Xsed -e 's/\\\\\\\\\\\\\\\$0 --fallback-echo"\$/\$0 --fallback-echo"/'\`
- ;;
-esac
-
ac_aux_dir='$ac_aux_dir'
-xsi_shell='$xsi_shell'
-lt_shell_append='$lt_shell_append'
-# See if we are running on zsh, and set the options which allow our
+# See if we are running on zsh, and set the options that allow our
# commands through without removal of \ escapes INIT.
-if test -n "\${ZSH_VERSION+set}" ; then
+if test -n "\${ZSH_VERSION+set}"; then
setopt NO_GLOB_SUBST
fi
@@ -15996,7 +17630,6 @@
PACKAGE='$PACKAGE'
VERSION='$VERSION'
- TIMESTAMP='$TIMESTAMP'
RM='$RM'
ofile='$ofile'
@@ -16866,65 +18499,63 @@
;;
"libtool":C)
- # See if we are running on zsh, and set the options which allow our
+ # See if we are running on zsh, and set the options that allow our
# commands through without removal of \ escapes.
- if test -n "${ZSH_VERSION+set}" ; then
+ if test -n "${ZSH_VERSION+set}"; then
setopt NO_GLOB_SUBST
fi
- cfgfile="${ofile}T"
+ cfgfile=${ofile}T
trap "$RM \"$cfgfile\"; exit 1" 1 2 15
$RM "$cfgfile"
cat <<_LT_EOF >> "$cfgfile"
#! $SHELL
+# Generated automatically by $as_me ($PACKAGE) $VERSION
+# NOTE: Changes made to this file will be lost: look at ltmain.sh.
-# `$ECHO "$ofile" | sed 's%^.*/%%'` - Provide generalized library-building support services.
-# Generated automatically by $as_me ($PACKAGE$TIMESTAMP) $VERSION
-# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`:
-# NOTE: Changes made to this file will be lost: look at ltmain.sh.
+# Provide generalized library-building support services.
+# Written by Gordon Matzigkeit, 1996
+
+# Copyright (C) 2014 Free Software Foundation, Inc.
+# This is free software; see the source for copying conditions. There is NO
+# warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+
+# GNU Libtool is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of of the License, or
+# (at your option) any later version.
#
-# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005,
-# 2006, 2007, 2008 Free Software Foundation, Inc.
-# Written by Gordon Matzigkeit, 1996
+# As a special exception to the GNU General Public License, if you
+# distribute this file as part of a program or library that is built
+# using GNU Libtool, you may include this file under the same
+# distribution terms that you use for the rest of that program.
#
-# This file is part of GNU Libtool.
-#
-# GNU Libtool is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# As a special exception to the GNU General Public License,
-# if you distribute this file as part of a program or library that
-# is built using GNU Libtool, you may include this file under the
-# same distribution terms that you use for the rest of that program.
-#
-# GNU Libtool is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# GNU Libtool is distributed in the hope that it will be useful, but
+# WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
-# along with GNU Libtool; see the file COPYING. If not, a copy
-# can be downloaded from http://www.gnu.org/licenses/gpl.html, or
-# obtained by writing to the Free Software Foundation, Inc.,
-# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+# along with this program. If not, see <http://www.gnu.org/licenses/>.
# The names of the tagged configurations supported by this script.
-available_tags=""
+available_tags=''
+# Configured defaults for sys_lib_dlsearch_path munging.
+: \${LT_SYS_LIBRARY_PATH="$configure_time_lt_sys_library_path"}
+
# ### BEGIN LIBTOOL CONFIG
# Assembler program.
-AS=$AS
+AS=$lt_AS
# DLL creation program.
-DLLTOOL=$DLLTOOL
+DLLTOOL=$lt_DLLTOOL
# Object dumper program.
-OBJDUMP=$OBJDUMP
+OBJDUMP=$lt_OBJDUMP
# Which release of libtool.m4 was used?
macro_version=$macro_version
@@ -16942,6 +18573,18 @@
# Whether or not to optimize for fast installation.
fast_install=$enable_fast_install
+# Shared archive member basename,for filename based shared library versioning on AIX.
+shared_archive_member_spec=$shared_archive_member_spec
+
+# Shell to use when invoking shell scripts.
+SHELL=$lt_SHELL
+
+# An echo program that protects backslashes.
+ECHO=$lt_ECHO
+
+# The PATH separator for the build system.
+PATH_SEPARATOR=$lt_PATH_SEPARATOR
+
# The host system.
host_alias=$host_alias
host=$host
@@ -16991,20 +18634,36 @@
# turn newlines into spaces.
NL2SP=$lt_lt_NL2SP
-# How to create reloadable object files.
-reload_flag=$lt_reload_flag
-reload_cmds=$lt_reload_cmds
+# convert \$build file names to \$host format.
+to_host_file_cmd=$lt_cv_to_host_file_cmd
+# convert \$build files to toolchain format.
+to_tool_file_cmd=$lt_cv_to_tool_file_cmd
+
# Method to check whether dependent libraries are shared objects.
deplibs_check_method=$lt_deplibs_check_method
-# Command to use when deplibs_check_method == "file_magic".
+# Command to use when deplibs_check_method = "file_magic".
file_magic_cmd=$lt_file_magic_cmd
+# How to find potential files when deplibs_check_method = "file_magic".
+file_magic_glob=$lt_file_magic_glob
+
+# Find potential files using nocaseglob when deplibs_check_method = "file_magic".
+want_nocaseglob=$lt_want_nocaseglob
+
+# Command to associate shared and link libraries.
+sharedlib_from_linklib_cmd=$lt_sharedlib_from_linklib_cmd
+
# The archiver.
AR=$lt_AR
+
+# Flags to create an archive.
AR_FLAGS=$lt_AR_FLAGS
+# How to feed a file listing to the archiver.
+archiver_list_spec=$lt_archiver_list_spec
+
# A symbol stripping program.
STRIP=$lt_STRIP
@@ -17013,6 +18672,9 @@
old_postinstall_cmds=$lt_old_postinstall_cmds
old_postuninstall_cmds=$lt_old_postuninstall_cmds
+# Whether to use a lock for old archive extraction.
+lock_old_archive_extraction=$lock_old_archive_extraction
+
# A C compiler.
LTCC=$lt_CC
@@ -17025,6 +18687,9 @@
# Transform the output of nm in a proper C declaration.
global_symbol_to_cdecl=$lt_lt_cv_sys_global_symbol_to_cdecl
+# Transform the output of nm into a list of symbols to manually relocate.
+global_symbol_to_import=$lt_lt_cv_sys_global_symbol_to_import
+
# Transform the output of nm in a C name address pair.
global_symbol_to_c_name_address=$lt_lt_cv_sys_global_symbol_to_c_name_address
@@ -17031,15 +18696,21 @@
# Transform the output of nm in a C name address pair when lib prefix is needed.
global_symbol_to_c_name_address_lib_prefix=$lt_lt_cv_sys_global_symbol_to_c_name_address_lib_prefix
+# The name lister interface.
+nm_interface=$lt_lt_cv_nm_interface
+
+# Specify filename containing input files for \$NM.
+nm_file_list_spec=$lt_nm_file_list_spec
+
+# The root where to search for dependent libraries,and where our libraries should be installed.
+lt_sysroot=$lt_sysroot
+
+# Command to truncate a binary pipe.
+lt_truncate_bin=$lt_lt_cv_truncate_bin
+
# The name of the directory that contains temporary libtool files.
objdir=$objdir
-# Shell to use when invoking shell scripts.
-SHELL=$lt_SHELL
-
-# An echo program that does not interpret backslashes.
-ECHO=$lt_ECHO
-
# Used to examine libraries when file_magic_cmd begins with "file".
MAGIC_CMD=$MAGIC_CMD
@@ -17046,6 +18717,9 @@
# Must we lock files when doing compilation?
need_locks=$lt_need_locks
+# Manifest tool.
+MANIFEST_TOOL=$lt_MANIFEST_TOOL
+
# Tool to manipulate archived DWARF debug symbol files on Mac OS X.
DSYMUTIL=$lt_DSYMUTIL
@@ -17102,6 +18776,9 @@
# The coded name of the library, if different from the real name.
soname_spec=$lt_soname_spec
+# Permission mode override for installation of shared libraries.
+install_override_mode=$lt_install_override_mode
+
# Command to use after installation of a shared archive.
postinstall_cmds=$lt_postinstall_cmds
@@ -17121,9 +18798,12 @@
# Compile-time system search path for libraries.
sys_lib_search_path_spec=$lt_sys_lib_search_path_spec
-# Run-time system search path for libraries.
-sys_lib_dlsearch_path_spec=$lt_sys_lib_dlsearch_path_spec
+# Detected run-time system search path for libraries.
+sys_lib_dlsearch_path_spec=$lt_configure_time_dlsearch_path
+# Explicit LT_SYS_LIBRARY_PATH set during ./configure time.
+configure_time_lt_sys_library_path=$lt_configure_time_lt_sys_library_path
+
# Whether dlopen is supported.
dlopen_support=$enable_dlopen
@@ -17141,6 +18821,10 @@
# The linker used to build libraries.
LD=$lt_LD
+# How to create reloadable object files.
+reload_flag=$lt_reload_flag
+reload_cmds=$lt_reload_cmds
+
# Commands used to build an old-style archive.
old_archive_cmds=$lt_old_archive_cmds
@@ -17153,12 +18837,12 @@
# Compiler flag to turn off builtin functions.
no_builtin_flag=$lt_lt_prog_compiler_no_builtin_flag
+# Additional compiler flags for building library objects.
+pic_flag=$lt_lt_prog_compiler_pic
+
# How to pass a linker flag through the compiler.
wl=$lt_lt_prog_compiler_wl
-# Additional compiler flags for building library objects.
-pic_flag=$lt_lt_prog_compiler_pic
-
# Compiler flag to prevent dynamic linking.
link_static_flag=$lt_lt_prog_compiler_static
@@ -17208,20 +18892,16 @@
# This must work even if \$libdir does not exist
hardcode_libdir_flag_spec=$lt_hardcode_libdir_flag_spec
-# If ld is used when linking, flag to hardcode \$libdir into a binary
-# during linking. This must work even if \$libdir does not exist.
-hardcode_libdir_flag_spec_ld=$lt_hardcode_libdir_flag_spec_ld
-
# Whether we need a single "-rpath" flag with a separated argument.
hardcode_libdir_separator=$lt_hardcode_libdir_separator
-# Set to "yes" if using DIR/libNAME\${shared_ext} during linking hardcodes
+# Set to "yes" if using DIR/libNAME\$shared_ext during linking hardcodes
# DIR into the resulting binary.
hardcode_direct=$hardcode_direct
-# Set to "yes" if using DIR/libNAME\${shared_ext} during linking hardcodes
+# Set to "yes" if using DIR/libNAME\$shared_ext during linking hardcodes
# DIR into the resulting binary and the resulting library dependency is
-# "absolute",i.e impossible to change by setting \${shlibpath_var} if the
+# "absolute",i.e impossible to change by setting \$shlibpath_var if the
# library is relocated.
hardcode_direct_absolute=$hardcode_direct_absolute
@@ -17245,9 +18925,6 @@
# Whether libtool must link a program against all its dependency libraries.
link_all_deplibs=$link_all_deplibs
-# Fix the shell variable \$srcfile for the compiler.
-fix_srcfile_path=$lt_fix_srcfile_path
-
# Set to "yes" if exported symbols are required.
always_export_symbols=$always_export_symbols
@@ -17263,6 +18940,9 @@
# Commands necessary for linking programs (against libraries) with templates.
prelink_cmds=$lt_prelink_cmds
+# Commands necessary for finishing linking programs.
+postlink_cmds=$lt_postlink_cmds
+
# Specify filename containing input files.
file_list_spec=$lt_file_list_spec
@@ -17273,6 +18953,65 @@
_LT_EOF
+ cat <<'_LT_EOF' >> "$cfgfile"
+
+# ### BEGIN FUNCTIONS SHARED WITH CONFIGURE
+
+# func_munge_path_list VARIABLE PATH
+# -----------------------------------
+# VARIABLE is name of variable containing _space_ separated list of
+# directories to be munged by the contents of PATH, which is string
+# having a format:
+# "DIR[:DIR]:"
+# string "DIR[ DIR]" will be prepended to VARIABLE
+# ":DIR[:DIR]"
+# string "DIR[ DIR]" will be appended to VARIABLE
+# "DIRP[:DIRP]::[DIRA:]DIRA"
+# string "DIRP[ DIRP]" will be prepended to VARIABLE and string
+# "DIRA[ DIRA]" will be appended to VARIABLE
+# "DIR[:DIR]"
+# VARIABLE will be replaced by "DIR[ DIR]"
+func_munge_path_list ()
+{
+ case x$2 in
+ x)
+ ;;
+ *:)
+ eval $1=\"`$ECHO $2 | $SED 's/:/ /g'` \$$1\"
+ ;;
+ x:*)
+ eval $1=\"\$$1 `$ECHO $2 | $SED 's/:/ /g'`\"
+ ;;
+ *::*)
+ eval $1=\"\$$1\ `$ECHO $2 | $SED -e 's/.*:://' -e 's/:/ /g'`\"
+ eval $1=\"`$ECHO $2 | $SED -e 's/::.*//' -e 's/:/ /g'`\ \$$1\"
+ ;;
+ *)
+ eval $1=\"`$ECHO $2 | $SED 's/:/ /g'`\"
+ ;;
+ esac
+}
+
+
+# Calculate cc_basename. Skip known compiler wrappers and cross-prefix.
+func_cc_basename ()
+{
+ for cc_temp in $*""; do
+ case $cc_temp in
+ compile | *[\\/]compile | ccache | *[\\/]ccache ) ;;
+ distcc | *[\\/]distcc | purify | *[\\/]purify ) ;;
+ \-*) ;;
+ *) break;;
+ esac
+ done
+ func_cc_basename_result=`$ECHO "$cc_temp" | $SED "s%.*/%%; s%^$host_alias-%%"`
+}
+
+
+# ### END FUNCTIONS SHARED WITH CONFIGURE
+
+_LT_EOF
+
case $host_os in
aix3*)
cat <<\_LT_EOF >> "$cfgfile"
@@ -17279,7 +19018,7 @@
# AIX sometimes has problems with the GCC collect2 program. For some
# reason, if we set the COLLECT_NAMES environment variable, the problems
# vanish in a puff of smoke.
-if test "X${COLLECT_NAMES+set}" != Xset; then
+if test set != "${COLLECT_NAMES+set}"; then
COLLECT_NAMES=
export COLLECT_NAMES
fi
@@ -17288,7 +19027,7 @@
esac
-ltmain="$ac_aux_dir/ltmain.sh"
+ltmain=$ac_aux_dir/ltmain.sh
# We use sed instead of cat because bash on DJGPP gets confused if
@@ -17295,212 +19034,10 @@
# if finds mixed CR/LF and LF-only lines. Since sed operates in
# text mode, it properly converts lines to CR/LF. This bash problem
# is reportedly fixed, but why not run on old versions too?
- sed '/^# Generated shell functions inserted here/q' "$ltmain" >> "$cfgfile" \
- || (rm -f "$cfgfile"; exit 1)
+ sed '$q' "$ltmain" >> "$cfgfile" \
+ || (rm -f "$cfgfile"; exit 1)
- case $xsi_shell in
- yes)
- cat << \_LT_EOF >> "$cfgfile"
-
-# func_dirname file append nondir_replacement
-# Compute the dirname of FILE. If nonempty, add APPEND to the result,
-# otherwise set result to NONDIR_REPLACEMENT.
-func_dirname ()
-{
- case ${1} in
- */*) func_dirname_result="${1%/*}${2}" ;;
- * ) func_dirname_result="${3}" ;;
- esac
-}
-
-# func_basename file
-func_basename ()
-{
- func_basename_result="${1##*/}"
-}
-
-# func_dirname_and_basename file append nondir_replacement
-# perform func_basename and func_dirname in a single function
-# call:
-# dirname: Compute the dirname of FILE. If nonempty,
-# add APPEND to the result, otherwise set result
-# to NONDIR_REPLACEMENT.
-# value returned in "$func_dirname_result"
-# basename: Compute filename of FILE.
-# value retuned in "$func_basename_result"
-# Implementation must be kept synchronized with func_dirname
-# and func_basename. For efficiency, we do not delegate to
-# those functions but instead duplicate the functionality here.
-func_dirname_and_basename ()
-{
- case ${1} in
- */*) func_dirname_result="${1%/*}${2}" ;;
- * ) func_dirname_result="${3}" ;;
- esac
- func_basename_result="${1##*/}"
-}
-
-# func_stripname prefix suffix name
-# strip PREFIX and SUFFIX off of NAME.
-# PREFIX and SUFFIX must not contain globbing or regex special
-# characters, hashes, percent signs, but SUFFIX may contain a leading
-# dot (in which case that matches only a dot).
-func_stripname ()
-{
- # pdksh 5.2.14 does not do ${X%$Y} correctly if both X and Y are
- # positional parameters, so assign one to ordinary parameter first.
- func_stripname_result=${3}
- func_stripname_result=${func_stripname_result#"${1}"}
- func_stripname_result=${func_stripname_result%"${2}"}
-}
-
-# func_opt_split
-func_opt_split ()
-{
- func_opt_split_opt=${1%%=*}
- func_opt_split_arg=${1#*=}
-}
-
-# func_lo2o object
-func_lo2o ()
-{
- case ${1} in
- *.lo) func_lo2o_result=${1%.lo}.${objext} ;;
- *) func_lo2o_result=${1} ;;
- esac
-}
-
-# func_xform libobj-or-source
-func_xform ()
-{
- func_xform_result=${1%.*}.lo
-}
-
-# func_arith arithmetic-term...
-func_arith ()
-{
- func_arith_result=$(( $* ))
-}
-
-# func_len string
-# STRING may not start with a hyphen.
-func_len ()
-{
- func_len_result=${#1}
-}
-
-_LT_EOF
- ;;
- *) # Bourne compatible functions.
- cat << \_LT_EOF >> "$cfgfile"
-
-# func_dirname file append nondir_replacement
-# Compute the dirname of FILE. If nonempty, add APPEND to the result,
-# otherwise set result to NONDIR_REPLACEMENT.
-func_dirname ()
-{
- # Extract subdirectory from the argument.
- func_dirname_result=`$ECHO "X${1}" | $Xsed -e "$dirname"`
- if test "X$func_dirname_result" = "X${1}"; then
- func_dirname_result="${3}"
- else
- func_dirname_result="$func_dirname_result${2}"
- fi
-}
-
-# func_basename file
-func_basename ()
-{
- func_basename_result=`$ECHO "X${1}" | $Xsed -e "$basename"`
-}
-
-
-# func_stripname prefix suffix name
-# strip PREFIX and SUFFIX off of NAME.
-# PREFIX and SUFFIX must not contain globbing or regex special
-# characters, hashes, percent signs, but SUFFIX may contain a leading
-# dot (in which case that matches only a dot).
-# func_strip_suffix prefix name
-func_stripname ()
-{
- case ${2} in
- .*) func_stripname_result=`$ECHO "X${3}" \
- | $Xsed -e "s%^${1}%%" -e "s%\\\\${2}\$%%"`;;
- *) func_stripname_result=`$ECHO "X${3}" \
- | $Xsed -e "s%^${1}%%" -e "s%${2}\$%%"`;;
- esac
-}
-
-# sed scripts:
-my_sed_long_opt='1s/^\(-[^=]*\)=.*/\1/;q'
-my_sed_long_arg='1s/^-[^=]*=//'
-
-# func_opt_split
-func_opt_split ()
-{
- func_opt_split_opt=`$ECHO "X${1}" | $Xsed -e "$my_sed_long_opt"`
- func_opt_split_arg=`$ECHO "X${1}" | $Xsed -e "$my_sed_long_arg"`
-}
-
-# func_lo2o object
-func_lo2o ()
-{
- func_lo2o_result=`$ECHO "X${1}" | $Xsed -e "$lo2o"`
-}
-
-# func_xform libobj-or-source
-func_xform ()
-{
- func_xform_result=`$ECHO "X${1}" | $Xsed -e 's/\.[^.]*$/.lo/'`
-}
-
-# func_arith arithmetic-term...
-func_arith ()
-{
- func_arith_result=`expr "$@"`
-}
-
-# func_len string
-# STRING may not start with a hyphen.
-func_len ()
-{
- func_len_result=`expr "$1" : ".*" 2>/dev/null || echo $max_cmd_len`
-}
-
-_LT_EOF
-esac
-
-case $lt_shell_append in
- yes)
- cat << \_LT_EOF >> "$cfgfile"
-
-# func_append var value
-# Append VALUE to the end of shell variable VAR.
-func_append ()
-{
- eval "$1+=\$2"
-}
-_LT_EOF
- ;;
- *)
- cat << \_LT_EOF >> "$cfgfile"
-
-# func_append var value
-# Append VALUE to the end of shell variable VAR.
-func_append ()
-{
- eval "$1=\$$1\$2"
-}
-
-_LT_EOF
- ;;
- esac
-
-
- sed -n '/^# Generated shell functions inserted here/,$p' "$ltmain" >> "$cfgfile" \
- || (rm -f "$cfgfile"; exit 1)
-
- mv -f "$cfgfile" "$ofile" ||
+ mv -f "$cfgfile" "$ofile" ||
(rm -f "$ofile" && cp "$cfgfile" "$ofile" && rm -f "$cfgfile")
chmod +x "$ofile"
Modified: trunk/Build/source/libs/zziplib/zziplib-src/configure.ac
===================================================================
--- trunk/Build/source/libs/zziplib/zziplib-src/configure.ac 2018-03-17 22:23:43 UTC (rev 47003)
+++ trunk/Build/source/libs/zziplib/zziplib-src/configure.ac 2018-03-18 00:25:18 UTC (rev 47004)
@@ -64,6 +64,7 @@
# -----------------------------------------------------------------------
AX_SPEC_DEFAULTS
AM_INIT_AUTOMAKE($PACKAGE,$VERSION)
+AX_CHECK_ENABLE_DEBUG()
dnl test ".$CFLAGS" = "." && CFLAGS=""
AC_PROG_CC
dnl test ".$CFLAGS" = "." && test "$GCC" = "yes" && CFLAGS="-O3"
@@ -100,7 +101,7 @@
AC_CHECK_HEADERS(sys/types.h sys/mman.h sys/stat.h sys/param.h) dnl posix'ish
AC_CHECK_HEADERS(io.h direct.h zlib.h byteswap.h)
AC_CHECK_HEADERS(fnmatch.h)
-AC_CHECK_FUNCS( strcasecmp strndup )
+AC_CHECK_FUNCS( strcasecmp strnlen strndup )
AC_TYPE_OFF_T
AC_TYPE_SIZE_T
@@ -108,9 +109,12 @@
AC_CHECK_TYPE(ssize_t,int)
AC_CHECK_TYPE(off64_t,_zzip_off_t)
AC_CHECK_TYPE(__int64,long long)
-AC_COMPILE_CHECK_SIZEOF(short)
-AC_COMPILE_CHECK_SIZEOF(int)
-AC_COMPILE_CHECK_SIZEOF(long)
+if test "xno" = "x$ac_cv_header_stdint_h" ; then
+ AC_COMPILE_CHECK_SIZEOF([short])
+ AC_COMPILE_CHECK_SIZEOF([int])
+ AC_COMPILE_CHECK_SIZEOF([long])
+ AC_COMPILE_CHECK_SIZEOF([int *])
+fi
AC_C_BIGENDIAN
AX_CHECK_ALIGNED_ACCESS_REQUIRED
dnl -------------------------------------------------------------
@@ -279,6 +283,25 @@
fi
AC_SUBST([SDL])
AC_SUBST([SDL_GENERATE])
+
+# ----------------------------------------------------------------
+AC_MSG_CHECKING(whether using address sanitizer)
+AC_ARG_WITH(asan, AC_HELP_STRING(
+ [--with-asan],[compile with adress sanitizer])
+ , [case "${withval}" in
+ yes|no) with_asan="$withval" ;;
+ *) AC_MSG_RESULT(oops)
+ AC_MSG_ERROR(bad value ${withval} for --with-asan) ;;
+ esac], [with_asan="no"])
+ASAN_LIBS=""
+ASAN_CFLAGS=""
+if test ".$with_asan" = ".yes" ; then
+ ASAN_LIBS="-lasan"
+ ASAN_CFLAGS="-fsanitize=address"
+fi
+AC_MSG_RESULT([$with_asan, $ASAN_CFLAGS])
+AC_SUBST([ASAN_LIBS])
+AC_SUBST([ASAN_CFLAGS])
# ---------------------------------------------------------------
AC_MSG_CHECKING(running extra tests on make check)
if test "MKZIP" != ":" ; then
Modified: trunk/Build/source/libs/zziplib/zziplib-src/docs/Makefile.am
===================================================================
--- trunk/Build/source/libs/zziplib/zziplib-src/docs/Makefile.am 2018-03-17 22:23:43 UTC (rev 47003)
+++ trunk/Build/source/libs/zziplib/zziplib-src/docs/Makefile.am 2018-03-18 00:25:18 UTC (rev 47004)
@@ -25,8 +25,8 @@
$(zzipdoc_FILES) sdocbook.css \
zziplib-manpages.dbk zziplib-master.dbk \
zziplib-manpages.tar
-CLEANFILES = *.pc *.omf
-DISTCLEANFILES = zziplib.spec manpages.tar htmpages.tar *.html *.xml
+CLEANFILES = *.pc *.omf *.tar *.html *.xml
+DISTCLEANFILES = zziplib.spec
zzipdoc_FILES = makedocs.py zzipdoc/__init__.py \
zzipdoc/commentmarkup.py zzipdoc/match.py \
@@ -152,6 +152,25 @@
; echo '$(DELETE); rm man3/*.3 ; rmdir man3' \
; $(DELETE); rm man3/*.3 ; rmdir man3 \
; fi ; true
+ @ if test "$(XMLTO)" = ":" \
+ ; then echo going to regenerate "$@" in subdir "'"man"'" \
+ ; echo 'test ! -d man3 || rm man3/* ; test -d man3 || mkdir man3' \
+ ; test ! -d man3 || rm man3/* ; test -d man3 || mkdir man3 \
+ ; echo '$(srcdir)/dbk2man.py -d man3 zziplib.xml' \
+ ; $(PYTHON) $(srcdir)/dbk2man.py -d man3 zziplib.xml \
+ ; echo '$(srcdir)/dbk2man.py -d man3 zzipmmapped.xml' \
+ ; $(PYTHON) $(srcdir)/dbk2man.py -d man3 zzipmmapped.xml \
+ ; echo '$(srcdir)/dbk2man.py -d man3 zzipfseeko.xml' \
+ ; $(PYTHON) $(srcdir)/dbk2man.py -d man3 zzipfseeko.xml \
+ ; if test -d man3/man3; then mv man3 man3_ \
+ ; mv man3_/man3 man3; rm -r man3_; fi \
+ ; echo 'chmod 664 man3/*.3' \
+ ; chmod 664 man3/*.3 \
+ ; echo '$(PAX_TAR_CREATE) "$@" man3/' \
+ ; $(PAX_TAR_CREATE) "$@" man3/ \
+ ; echo '$(DELETE); rm man3/*.3 ; rmdir man3' \
+ ; $(DELETE); rm man3/*.3 ; rmdir man3 \
+ ; fi ; true
@ if test -s $@ \
; then echo cp $@ zziplib-$@ "(saved)"; cp $@ zziplib-$@ \
; else echo cp $(srcdir)/zziplib-$@ $@; cp $(srcdir)/zziplib-$@ $@ \
Modified: trunk/Build/source/libs/zziplib/zziplib-src/docs/Makefile.in
===================================================================
--- trunk/Build/source/libs/zziplib/zziplib-src/docs/Makefile.in 2018-03-17 22:23:43 UTC (rev 47003)
+++ trunk/Build/source/libs/zziplib/zziplib-src/docs/Makefile.in 2018-03-18 00:25:18 UTC (rev 47004)
@@ -1,7 +1,7 @@
-# Makefile.in generated by automake 1.13.4 from Makefile.am.
+# Makefile.in generated by automake 1.15.1 from Makefile.am.
# @configure_input@
-# Copyright (C) 1994-2013 Free Software Foundation, Inc.
+# Copyright (C) 1994-2017 Free Software Foundation, Inc.
# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
@@ -14,7 +14,17 @@
@SET_MAKE@
VPATH = @srcdir@
-am__is_gnu_make = test -n '$(MAKEFILE_LIST)' && test -n '$(MAKELEVEL)'
+am__is_gnu_make = { \
+ if test -z '$(MAKELEVEL)'; then \
+ false; \
+ elif test -n '$(MAKE_HOST)'; then \
+ true; \
+ elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \
+ true; \
+ else \
+ false; \
+ fi; \
+}
am__make_running_with_option = \
case $${target_option-} in \
?) ;; \
@@ -79,8 +89,6 @@
host_triplet = @host@
target_triplet = @target@
subdir = docs
-DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/Makefile.am \
- $(top_srcdir)/uses/mkinstalldirs COPYING.LIB
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
am__aclocal_m4_deps = $(top_srcdir)/m4/ac_compile_check_sizeof.m4 \
$(top_srcdir)/m4/ac_set_default_paths_system.m4 \
@@ -91,6 +99,7 @@
$(top_srcdir)/m4/ax_cflags_strict_prototypes.m4 \
$(top_srcdir)/m4/ax_cflags_warn_all.m4 \
$(top_srcdir)/m4/ax_check_aligned_access_required.m4 \
+ $(top_srcdir)/m4/ax_check_enable_debug.m4 \
$(top_srcdir)/m4/ax_configure_args.m4 \
$(top_srcdir)/m4/ax_create_pkgconfig_info.m4 \
$(top_srcdir)/m4/ax_enable_builddir.m4 \
@@ -113,6 +122,7 @@
$(top_srcdir)/configure.ac
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
$(ACLOCAL_M4)
+DIST_COMMON = $(srcdir)/Makefile.am $(am__DIST_COMMON)
mkinstalldirs = $(SHELL) $(top_srcdir)/uses/mkinstalldirs
CONFIG_HEADER = $(top_builddir)/config.h
CONFIG_CLEAN_FILES =
@@ -137,6 +147,8 @@
*) (install-info --version) >/dev/null 2>&1;; \
esac
am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP)
+am__DIST_COMMON = $(srcdir)/Makefile.in \
+ $(top_srcdir)/uses/mkinstalldirs COPYING.LIB
DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
ACLOCAL = @ACLOCAL@
AMTAR = @AMTAR@
@@ -143,6 +155,8 @@
AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
AR = @AR@
AS = @AS@
+ASAN_CFLAGS = @ASAN_CFLAGS@
+ASAN_LIBS = @ASAN_LIBS@
AUTOCONF = @AUTOCONF@
AUTOHEADER = @AUTOHEADER@
AUTOMAKE = @AUTOMAKE@
@@ -182,8 +196,10 @@
LIPO = @LIPO@
LN_S = @LN_S@
LTLIBOBJS = @LTLIBOBJS@
+LT_SYS_LIBRARY_PATH = @LT_SYS_LIBRARY_PATH@
MAINT = @MAINT@
MAKEINFO = @MAKEINFO@
+MANIFEST_TOOL = @MANIFEST_TOOL@
MKDIR_P = @MKDIR_P@
MKZIP = @MKZIP@
NM = @NM@
@@ -229,6 +245,7 @@
abs_srcdir = @abs_srcdir@
abs_top_builddir = @abs_top_builddir@
abs_top_srcdir = @abs_top_srcdir@
+ac_ct_AR = @ac_ct_AR@
ac_ct_CC = @ac_ct_CC@
ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
aclocaldir = @aclocaldir@
@@ -263,7 +280,6 @@
libexecdir = @libexecdir@
localedir = @localedir@
localstatedir = @localstatedir@
-lt_ECHO = @lt_ECHO@
mandir = @mandir@
mkdir_p = @mkdir_p@
oldincludedir = @oldincludedir@
@@ -313,8 +329,8 @@
zziplib-manpages.dbk zziplib-master.dbk \
zziplib-manpages.tar
-CLEANFILES = *.pc *.omf
-DISTCLEANFILES = zziplib.spec manpages.tar htmpages.tar *.html *.xml
+CLEANFILES = *.pc *.omf *.tar *.html *.xml
+DISTCLEANFILES = zziplib.spec
zzipdoc_FILES = makedocs.py zzipdoc/__init__.py \
zzipdoc/commentmarkup.py zzipdoc/match.py \
zzipdoc/dbk2htm.py zzipdoc/htm2dbk.py \
@@ -364,7 +380,6 @@
echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign docs/Makefile'; \
$(am__cd) $(top_srcdir) && \
$(AUTOMAKE) --foreign docs/Makefile
-.PRECIOUS: Makefile
Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
@case '$?' in \
*config.status*) \
@@ -542,7 +557,9 @@
mostlyclean-libtool pdf pdf-am ps ps-am tags-am uninstall \
uninstall-am
+.PRECIOUS: Makefile
+
all : all-am default
default : doc @MAINTAINER_MODE_FALSE@ mans
clean-doc clean-docs : clean-unpack
@@ -641,6 +658,25 @@
; echo '$(DELETE); rm man3/*.3 ; rmdir man3' \
; $(DELETE); rm man3/*.3 ; rmdir man3 \
; fi ; true
+ @ if test "$(XMLTO)" = ":" \
+ ; then echo going to regenerate "$@" in subdir "'"man"'" \
+ ; echo 'test ! -d man3 || rm man3/* ; test -d man3 || mkdir man3' \
+ ; test ! -d man3 || rm man3/* ; test -d man3 || mkdir man3 \
+ ; echo '$(srcdir)/dbk2man.py -d man3 zziplib.xml' \
+ ; $(PYTHON) $(srcdir)/dbk2man.py -d man3 zziplib.xml \
+ ; echo '$(srcdir)/dbk2man.py -d man3 zzipmmapped.xml' \
+ ; $(PYTHON) $(srcdir)/dbk2man.py -d man3 zzipmmapped.xml \
+ ; echo '$(srcdir)/dbk2man.py -d man3 zzipfseeko.xml' \
+ ; $(PYTHON) $(srcdir)/dbk2man.py -d man3 zzipfseeko.xml \
+ ; if test -d man3/man3; then mv man3 man3_ \
+ ; mv man3_/man3 man3; rm -r man3_; fi \
+ ; echo 'chmod 664 man3/*.3' \
+ ; chmod 664 man3/*.3 \
+ ; echo '$(PAX_TAR_CREATE) "$@" man3/' \
+ ; $(PAX_TAR_CREATE) "$@" man3/ \
+ ; echo '$(DELETE); rm man3/*.3 ; rmdir man3' \
+ ; $(DELETE); rm man3/*.3 ; rmdir man3 \
+ ; fi ; true
@ if test -s $@ \
; then echo cp $@ zziplib-$@ "(saved)"; cp $@ zziplib-$@ \
; else echo cp $(srcdir)/zziplib-$@ $@; cp $(srcdir)/zziplib-$@ $@ \
Added: trunk/Build/source/libs/zziplib/zziplib-src/docs/cpp2markdown-1.py
===================================================================
--- trunk/Build/source/libs/zziplib/zziplib-src/docs/cpp2markdown-1.py (rev 0)
+++ trunk/Build/source/libs/zziplib/zziplib-src/docs/cpp2markdown-1.py 2018-03-18 00:25:18 UTC (rev 47004)
@@ -0,0 +1,249 @@
+#! /usr/bin/env python
+import pygments.lexers.compiled as lexer
+import optparse
+import re
+from pygments.token import Token
+import logging
+
+logg = logging.getLogger(__name__)
+
+FileComment = "FileComment"
+FileInclude = "FileInclude"
+FunctionComment = "FunctionComment"
+FunctionPrototype = "FunctionPrototype"
+
+# use the markdown lexer to identify elements
+# then filter only those we want. The returned
+# token list is more global flagging the role
+# of each token for the manual generation.
+class CppToMarkdown:
+ def __init__(self):
+ self.alldefinitions = 0
+ self.internaldefs = ["static"]
+ self.filecomment_done = ""
+ self.fileinclude_done = ""
+ self.filecomment_text = ""
+ self.fileinclude_text = ""
+ self.comment_text = ""
+ self.function_text = ""
+ self.nesting = 0
+ def split_copyright(self, text):
+ # there are two modes - the copyright starts in the first line
+ # and the source description follows or the other way round.
+ lines = text.split("\n")
+ if len(lines) <= 2:
+ return "", text
+ introtext = [lines[0]]
+ copyright = [lines[0]]
+ check1 = re.compile(r"^\s[*]\s+[(][c][C][)]")
+ check2 = re.compile(r"^\s[*]\s+\b[Cc]opyright\b")
+ empty1 = re.compile(r"^\s[*]\s*$")
+ state = "intro"
+ for i in xrange(1,len(lines)-1):
+ line = lines[i]
+ if state == "intro":
+ if empty1.match(line):
+ introtext += [ line ]
+ continue
+ if check1.match(line) or check2.match(line):
+ state = "copyrightfirst"
+ copyright += [ line ]
+ else:
+ state = "introtextfirst"
+ introtext += [ line ]
+ elif state == "copyrightfirst":
+ if empty1.match(line):
+ state = "introtextlast"
+ introtext += [ line ]
+ else:
+ copyright += [ line ]
+ elif state == "introtextfirst":
+ if check1.match(line) or check2.match(line):
+ state = "copyrightlast"
+ copyright += [ line ]
+ else:
+ introtext += [ line ]
+ elif state == "copyrightlast":
+ copyright += [ line ]
+ elif state == "introtextlast":
+ introtext += [ line ]
+ else:
+ logg.fatal("UNKNOWN STATE %s", state)
+ introtext += [lines[-1]]
+ copyright += [lines[-1]]
+ logg.debug("@ COPYRIGHT\n %s", copyright)
+ logg.debug("@ INTROTEXT\n %s", introtext)
+ return "\n".join(copyright), "\n".join(introtext)
+ def commentblock(self, text):
+ prefix = re.compile(r"(?s)^\s*[/][*]+([^\n]*)(?=\n)")
+ suffix = re.compile(r"(?s)\n [*][/]\s*")
+ empty = re.compile(r"(?s)\n [*][ \t]*(?=\n)")
+ lines1 = re.compile(r"(?s)\n [*][ ][\t]")
+ lines2 = re.compile(r"(?s)\n [*][ ]")
+ lines3 = re.compile(r"(?s)\n [*][\t][\t]")
+ lines4 = re.compile(r"(?s)\n [*][\t]")
+ text = suffix.sub("\n", text)
+ text = prefix.sub("> \\1\n", text)
+ text = empty.sub("\n", text)
+ text = lines1.sub("\n ", text)
+ text = lines2.sub("\n", text)
+ text = lines3.sub("\n ", text)
+ text = lines4.sub("\n ", text)
+ return text
+ def functionblock(self, text):
+ empty = re.compile(r"(?s)\n[ \t]*(?=\n)")
+ text = " " + text.replace("\n", "\n ")
+ text = empty.sub("", text)
+ return text
+ def functionname(self, text):
+ check1 = re.compile(r"^[^()=]*(\b\w+)\s*[(=]")
+ found = check1.match(text)
+ if found:
+ return found.group(1)
+ check2 = re.compile(r"^[^()=]*(\b\w+)\s*$")
+ found = check2.match(text)
+ if found:
+ return found.group(1)
+ return ""
+ def run(self, filename):
+ filetext = open(filename).read()
+ for line in self.process(filetext, filename):
+ print line
+ def process(self, filetext, filename=""):
+ section_ruler = "-----------------------------------------"
+ copyright = ""
+ for token, text in self.parse(filetext):
+ if token == FileInclude:
+ yield "## SOURCE " + filename.replace("../", "")
+ yield " #" + text.replace("\n", "\n ")
+ elif token == FileComment:
+ yield "### INTRODUCTION"
+ copyright, introduction = self.split_copyright(text)
+ yield self.commentblock(introduction)
+ elif token == FunctionPrototype:
+ name = self.functionname(text)
+ yield section_ruler
+ yield "### " + name
+ # yield '<a id="%s"></a>' % name
+ yield "#### NAME"
+ yield " " + name
+ yield "#### SYNOPSIS"
+ yield self.functionblock(text)
+ elif token == FunctionComment:
+ if text:
+ yield "#### DESCRIPTION"
+ yield self.commentblock(text)
+ else:
+ if text:
+ yield "#### NOTES"
+ print token, text.replace("\n", "\n ")
+ if copyright:
+ yield section_ruler
+ yield "### COPYRIGHT"
+ yield self.commentblock(copyright)
+ def isexported_function(self):
+ function = self.function_text.strip().replace("\n"," ")
+ logg.debug("@ --------------------------------------")
+ logg.debug("@ ALLDEFINITIONS %s", self.alldefinitions)
+ if function.startswith("static ") and self.alldefinitions < 3:
+ logg.debug("@ ONLY INTERNAL %s", function)
+ return False
+ if not self.comment_text:
+ if not self.alldefinitions:
+ logg.info("@ NO COMMENT ON %s", function)
+ return False
+ else:
+ logg.warn("@ NO COMMENT ON %s", function)
+ text = self.comment_text
+ if text.startswith("/**"): return True
+ if text.startswith("/*!"): return True
+ if text.startswith("///"): return True
+ if text.startswith("//!"): return True
+ if self.alldefinitions >= 1:
+ if text.startswith("/*"): return True
+ if text.startswith("//"): return True
+ if self.alldefinitions >= 2:
+ return True
+ logg.debug("@ NO ** COMMENT %s", self.function_text.strip())
+ defs = self.function_text
+ return False
+ def parse(self, filetext):
+ c = lexer.CLexer()
+ for token, text in c.get_tokens(filetext):
+ logg.debug("|| %s %s", token, text.replace("\n", "\n |"))
+ # completion
+ if token != Token.Comment.Preproc and self.fileinclude_done == "no":
+ yield FileInclude, self.fileinclude_text
+ if self.filecomment_text:
+ yield FileComment, self.filecomment_text
+ self.fileinclude_done = "done"
+ # parsing
+ if token == Token.Comment.Multiline:
+ if not self.filecomment_done:
+ self.filecomment_done = "done"
+ self.filecomment_text = text
+ # wait until we know it is not a function documentation
+ self.comment_text = text
+ else:
+ self.comment_text = text
+ elif token == Token.Comment.Preproc and "include" in text:
+ if not self.fileinclude_done:
+ self.fileinclude_done = "no"
+ self.fileinclude_text += text
+ self.comment_text = ""
+ elif token == Token.Comment.Preproc and self.fileinclude_done == "no":
+ if not "\n" in self.fileinclude_text:
+ self.fileinclude_text += text
+ self.comment_text = ""
+ elif token == Token.Comment.Preproc:
+ self.comment_text = ""
+ self.function_text = ""
+ elif token == Token.Operator and text == "=":
+ if not self.nesting and self.function_text.strip():
+ if self.isexported_function():
+ yield FunctionPrototype, self.function_text
+ yield FunctionComment, self.comment_text
+ self.comment_text = ""
+ self.function_text = ""
+ elif token == Token.Punctuation and text == ";":
+ self.comment_text = ""
+ self.function_text = ""
+ elif token == Token.Punctuation and text == "{":
+ if not self.nesting and self.function_text.strip():
+ if self.isexported_function():
+ yield FunctionPrototype, self.function_text
+ yield FunctionComment, self.comment_text
+ self.comment_text = ""
+ self.function_text = ""
+ self.nesting += 1
+ elif token == Token.Punctuation and text == "}":
+ self.nesting -= 1
+ self.comment_text = ""
+ self.function_text = ""
+ else:
+ if not self.nesting:
+ self.function_text += text
+ else:
+ pass # yield "|",text
+
+
+if __name__ == "__main__":
+ _o = optparse.OptionParser()
+ _o.add_option("-v", "--verbose", action="count", default=0)
+ _o.add_option("-a", "--all", action="count", default=0,
+ help="include all definitions in the output (not only /**)")
+ opt, args = _o.parse_args()
+
+ logg.addHandler(logging.StreamHandler())
+ if opt.verbose:
+ logg.setLevel(logging.WARN - 10 * opt.verbose)
+
+ c = CppToMarkdown()
+ if opt.all:
+ c.alldefinitions = opt.all
+ for arg in args:
+ c.run(arg)
+
+
+
+
Added: trunk/Build/source/libs/zziplib/zziplib-src/docs/cpp2markdown.py
===================================================================
--- trunk/Build/source/libs/zziplib/zziplib-src/docs/cpp2markdown.py (rev 0)
+++ trunk/Build/source/libs/zziplib/zziplib-src/docs/cpp2markdown.py 2018-03-18 00:25:18 UTC (rev 47004)
@@ -0,0 +1,195 @@
+import pygments.lexers.compiled as lexer
+import optparse
+import re
+from pygments.token import Token
+import logging
+
+logg = logging.getLogger(__name__)
+
+FileComment = "FileComment"
+FileInclude = "FileInclude"
+FunctionComment = "FunctionComment"
+FunctionPrototype = "FunctionPrototype"
+
+# use the markdown lexer to identify elements
+# then filter only those we want. The returned
+# token list is more global flagging the role
+# of each token for the manual generation.
+class CppToMarkdown:
+ def __init__(self):
+ self.alldefinitions = 0
+ self.internaldefs = ["static"]
+ self.filecomment_done = ""
+ self.fileinclude_done = ""
+ self.filecomment_text = ""
+ self.fileinclude_text = ""
+ self.comment_text = ""
+ self.function_text = ""
+ self.nesting = 0
+ def commentblock(self, text):
+ emptyprefix = re.compile(r"(?s)^\s*[/][*]+[ \t]*(?=\n)")
+ prefix = re.compile(r"(?s)^\s*[/][*]+([^\n]*)(?=\n)")
+ suffix = re.compile(r"(?s)\n [*][/]\s*")
+ empty = re.compile(r"(?s)\n [*][ \t]*(?=\n)")
+ lines1 = re.compile(r"(?s)\n [*][ ][\t]")
+ lines2 = re.compile(r"(?s)\n [*][ ]")
+ lines3 = re.compile(r"(?s)\n [*][\t][\t]")
+ lines4 = re.compile(r"(?s)\n [*][\t]")
+ text = suffix.sub("\n", text)
+ text = emptyprefix.sub("", text)
+ text = prefix.sub("> \\1\n", text)
+ text = empty.sub("\n", text)
+ text = lines1.sub("\n ", text)
+ text = lines2.sub("\n", text)
+ text = lines3.sub("\n ", text)
+ text = lines4.sub("\n ", text)
+ return text
+ def functionblock(self, text):
+ empty = re.compile(r"(?s)\n[ \t]*(?=\n)")
+ text = " " + text.replace("\n", "\n ")
+ text = empty.sub("", text)
+ return text
+ def functionname(self, text):
+ check1 = re.compile(r"^[^()=]*(\b\w+)\s*[(=]")
+ found = check1.match(text)
+ if found:
+ return found.group(1)
+ check2 = re.compile(r"^[^()=]*(\b\w+)\s*$")
+ found = check2.match(text)
+ if found:
+ return found.group(1)
+ return ""
+ def run(self, filename):
+ filetext = open(filename).read()
+ for line in self.process(filetext, filename):
+ print line
+ def process(self, filetext, filename=""):
+ for token, text in self.parse(filetext):
+ if token == FileInclude:
+ yield "## SOURCE " + filename.replace("../", "")
+ yield " #" + text.replace("\n", "\n ")
+ elif token == FileComment:
+ yield "## INTRODUCTION"
+ yield self.commentblock(text)
+ elif token == FunctionPrototype:
+ name = self.functionname(text)
+ yield "-----------------------------------------"
+ yield "### " + name
+ yield "#### NAME"
+ yield " " + name
+ yield "#### SYNOPSIS"
+ yield self.functionblock(text)
+ elif token == FunctionComment:
+ if text:
+ yield "#### DESCRIPTION"
+ yield self.commentblock(text)
+ else:
+ if text:
+ yield "#### NOTES"
+ print token, text.replace("\n", "\n ")
+ def isexported_function(self):
+ function = self.function_text.strip().replace("\n"," ")
+ logg.debug("@ --------------------------------------")
+ logg.debug("@ ALLDEFINITIONS %s", self.alldefinitions)
+ if function.startswith("static ") and self.alldefinitions < 3:
+ logg.debug("@ ONLY INTERNAL %s", function)
+ return False
+ if not self.comment_text:
+ if not self.alldefinitions:
+ logg.info("@ NO COMMENT ON %s", function)
+ return False
+ else:
+ logg.warn("@ NO COMMENT ON %s", function)
+ text = self.comment_text
+ if text.startswith("/**"): return True
+ if text.startswith("/*!"): return True
+ if text.startswith("///"): return True
+ if text.startswith("//!"): return True
+ if self.alldefinitions >= 1:
+ if text.startswith("/*"): return True
+ if text.startswith("//"): return True
+ if self.alldefinitions >= 2:
+ return True
+ logg.debug("@ NO ** COMMENT %s", self.function_text.strip())
+ defs = self.function_text
+ return False
+ def parse(self, filetext):
+ c = lexer.CLexer()
+ for token, text in c.get_tokens(filetext):
+ logg.debug("|| %s %s", token, text.replace("\n", "\n |"))
+ # completion
+ if token != Token.Comment.Preproc and self.fileinclude_done == "no":
+ yield FileInclude, self.fileinclude_text
+ if self.filecomment_text:
+ yield FileComment, self.filecomment_text
+ self.fileinclude_done = "done"
+ # parsing
+ if token == Token.Comment.Multiline:
+ if not self.filecomment_done:
+ self.filecomment_done = "done"
+ self.filecomment_text = text
+ # wait until we know it is not a function documentation
+ self.comment_text = text
+ else:
+ self.comment_text = text
+ elif token == Token.Comment.Preproc and "include" in text:
+ if not self.fileinclude_done:
+ self.fileinclude_done = "no"
+ self.fileinclude_text += text
+ self.comment_text = ""
+ elif token == Token.Comment.Preproc and self.fileinclude_done == "no":
+ if not "\n" in self.fileinclude_text:
+ self.fileinclude_text += text
+ self.comment_text = ""
+ elif token == Token.Comment.Preproc:
+ self.comment_text = ""
+ self.function_text = ""
+ elif token == Token.Operator and text == "=":
+ if not self.nesting and self.function_text.strip():
+ if self.isexported_function():
+ yield FunctionPrototype, self.function_text
+ yield FunctionComment, self.comment_text
+ self.comment_text = ""
+ self.function_text = ""
+ elif token == Token.Punctuation and text == ";":
+ self.comment_text = ""
+ self.function_text = ""
+ elif token == Token.Punctuation and text == "{":
+ if not self.nesting and self.function_text.strip():
+ if self.isexported_function():
+ yield FunctionPrototype, self.function_text
+ yield FunctionComment, self.comment_text
+ self.comment_text = ""
+ self.function_text = ""
+ self.nesting += 1
+ elif token == Token.Punctuation and text == "}":
+ self.nesting -= 1
+ self.comment_text = ""
+ self.function_text = ""
+ else:
+ if not self.nesting:
+ self.function_text += text
+ else:
+ pass # yield "|",text
+
+
+if __name__ == "__main__":
+ _o = optparse.OptionParser()
+ _o.add_option("-v", "--verbose", action="count", default=0)
+ _o.add_option("-a", "--all", action="count", default=0,
+ help="include all definitions in the output (not only /**)")
+ opt, args = _o.parse_args()
+
+ logg.addHandler(logging.StreamHandler())
+ if opt.verbose:
+ logg.setLevel(logging.WARN - 10 * opt.verbose)
+
+ c = CppToMarkdown()
+ if opt.all:
+ c.alldefinitions = opt.all
+ for arg in args:
+ c.run(arg)
+
+
+
+
Added: trunk/Build/source/libs/zziplib/zziplib-src/docs/dbk2man.py
===================================================================
--- trunk/Build/source/libs/zziplib/zziplib-src/docs/dbk2man.py (rev 0)
+++ trunk/Build/source/libs/zziplib/zziplib-src/docs/dbk2man.py 2018-03-18 00:25:18 UTC (rev 47004)
@@ -0,0 +1,262 @@
+#! /usr/bin/python
+""" Converts an xml-file with docbook elements into troff manual pages.
+ The conversion uses etree expecting <refentry> elements in the input.
+ The output goes to a multiple files in manX/* subdirectories.
+"""
+
+__author__ = "Guido U. Draheim"
+
+import logging
+import os.path
+import re
+import xml.etree.ElementTree as ET
+
+logg = logging.getLogger("dbk2man")
+
+def parse_docbook(filename):
+ tree = ET.parse(filename)
+ return tree.getroot()
+
+def dbk2man(filename, subdirectory = "."):
+ root = parse_docbook(filename)
+ return docbook2man(root, subdirectory)
+
+def docbook2man(root, subdirectory = "."):
+ if root.tag != "reference":
+ logg.warning("no <reference> found, not a docbook file?")
+ logg.warning("found <%s> instead", root.tag)
+ title = ""
+ for refentry in root:
+ if refentry.tag == 'title':
+ title = refentry.text
+ continue
+ if refentry.tag != 'refentry':
+ logg.warning("no <refentry> list found, not a docbook file?")
+ logg.warning("found <%s> instead", refentry.tag)
+ continue
+ refentry2man(refentry, subdirectory, title)
+
+def esc(text):
+ text = text.replace(".", "\\&.")
+ text = text.replace("-", "\\-")
+ return text
+def unescape(text):
+ text = text.replace('<', '<')
+ text = text.replace('>', '>')
+ text = text.replace('"', '"')
+ text = text.replace('&', '&')
+ return text
+
+
+def refentryinfo2(refentry, title):
+ date, productname, manvolnum, refentrytitle = "", "", "", ""
+ section = refentry.find("refentryinfo")
+ if section is not None:
+ found = section.find("date")
+ if found is not None: date = found.text
+ found = section.find("productname")
+ if found is not None: productname = found.text
+ section = refentry.find("refmeta")
+ if section is not None:
+ found = section.find("refentrytitle")
+ if found is not None: refentrytitle = found.text
+ found = section.find("manvolnum")
+ if found is not None: manvolnum = found.text
+ header = []
+ if refentrytitle:
+ header += [ refentrytitle ]
+ if manvolnum:
+ header += [ manvolnum ]
+ if date:
+ header += [ date ]
+ if productname:
+ header += [ productname ]
+ if title:
+ header += [ title ]
+ if header:
+ text = '.TH ' + " ".join([ '"%s"' % esc(part) for part in header])
+ return text + "\n"
+ logg.warning("no <refmeta> found")
+ return ""
+
+def refentrytitle2(refentry, title = ""):
+ refentrytitle = ""
+ section = refentry.find("refmeta")
+ if section is not None:
+ found = section.find("refentrytitle")
+ if found is not None: refentrytitle = found.text
+ refentries = [ refentrytitle ]
+ refpurpose = ""
+ section = refentry.find("refnamediv")
+ if section is not None:
+ found = section.find("refpurpose")
+ if found is not None: refpurpose = found.text
+ for found in section.findall("refname"):
+ refname = found.text
+ if refname not in refentries:
+ refentries.append(refname)
+ if refentrytitle:
+ text = '.SH "NAME"' + "\n"
+ text += "" + esc(", ".join(refentries))
+ text += " " + esc("-")
+ text += " " + esc(refpurpose)
+ return text + "\n"
+ logg.warning("no <refentrytitle> found")
+ return ""
+
+
+def refsynopsisdiv2(refentry, title = ""):
+ section = refentry.find("refsynopsisdiv")
+ if section is not None:
+ text = '.SH "SYNOPSIS"' + "\n"
+ text += ".sp\n"
+ text += ".nf\n"
+ for funcsynopsis in section.findall("funcsynopsis"):
+ funcsynopsisinfo = ""
+ found = funcsynopsis.find("funcsynopsisinfo")
+ if found is not None: funcsynopsisinfo = found.text
+ if funcsynopsisinfo:
+ for info in funcsynopsisinfo.split("\n"):
+ text += '.B "%s"' % esc(info)
+ text += "\n"
+ text += ".sp" + "\n"
+ else:
+ logg.debug("no <funcsynopsisinfo> found")
+ logg.debug("\n%s", ET.tostring(funcsynopsis))
+ funcs = 0
+ for funcprototype in funcsynopsis.findall("funcprototype"):
+ item = ET.tostring(funcprototype)
+ item = item.replace("<funcprototype>","")
+ item = item.replace("</funcprototype>","")
+ if False:
+ item = item.replace("\n", " ")
+ item = item.replace("<funcdef>","")
+ item = item.replace("</funcdef>","")
+ item = item.replace("<paramdef>",'<def>')
+ item = item.replace("</paramdef>",'<def>')
+ items = item.split("<def>")
+ text += '.BI %s' % " ".join(['"%s"' % part for part in items if part])
+ else:
+ item = item.replace("<funcdef>","")
+ item = re.sub(r"([_\w]+)</funcdef>", lambda x: "\\fI%s\\fR" % x.group(1), item)
+ item = item.replace("<paramdef>",'')
+ item = item.replace("</paramdef>",'')
+ text += item
+ text += "\n"
+ funcs += 1
+ if not funcs:
+ logg.warning("no <funcprototype> found")
+ logg.warning("\n%s", ET.tostring(funcsynopsis))
+ text += ".fi" + "\n"
+ text += ".sp" + "\n"
+ return text
+ logg.warning("no <resynopsidiv> found")
+ return ""
+
+def refsections2(refentry, title = ""):
+ text = ""
+ for refsect in refentry.findall("refsect1"):
+ head = refsect.find("title")
+ if head is not None:
+ text += '.SH "%s"' % (esc(head.text.upper()))
+ text += "\n"
+ for para in list(refsect):
+ if para.tag == 'title':
+ continue
+ if para.tag == 'para':
+ text += cleanpara(para) + "\n"
+ text += ".sp\n"
+ continue
+ if para.tag == 'itemizedlist':
+ for item in list(para):
+ text += cleanpara(item) + "\n"
+ text += ".sp\n"
+ continue
+ logg.warning("unknown para <%s>", para.tag)
+ text += ".sp\n"
+ return text
+
+def cleanpara(para):
+ item = unescape(ET.tostring(para))
+ item = item.replace("\n", " ")
+ item = item.replace(" ", " ")
+ item = item.replace(" ", " ")
+ item = item.replace(" ", " ")
+ item = item.replace(" ", " ")
+ item = item.replace("<listitem>", "")
+ item = item.replace("</listitem>", "")
+ item = item.replace("<para>", "")
+ item = item.replace("</para>", "")
+ item = item.replace("<function>", "\\fI")
+ item = item.replace("</function>", "\\fP")
+ item = item.replace("<literal>", "\\fI")
+ item = item.replace("</literal>", "\\fP")
+ return item
+
+def styleinfo():
+ styles = []
+ styles += [ ".ie \\n(.g .ds Aq \\(aq" ]
+ styles += [ ".el .ds Aq " ] # http://bugs.debian.org/507673
+ styles += [ ".nh" ] # disable hyphenation
+ styles += [ ".ad l" ] # align left, no justification
+ return "".join([ "%s\n" % part for part in styles ])
+
+def refentry2man(refentry, subdirectory = ".", title = ""):
+ if refentry.tag != "refentry":
+ logg.warning("no <refentry> found, not a docbook file?")
+ logg.warning("found <%s> instead", refentry.tag)
+ text = ""
+ text += refentryinfo2(refentry, title)
+ text += styleinfo()
+ text += refentrytitle2(refentry, title)
+ text += refsynopsisdiv2(refentry)
+ text += refsections2(refentry)
+
+ ### write the files
+ refentrytitle = ""
+ manvolnum = "3"
+ section = refentry.find("refmeta")
+ if section is not None:
+ found = section.find("refentrytitle")
+ if found is not None: refentrytitle = found.text
+ found = section.find("manvolnum")
+ if found is not None: manvolnum = found.text
+ written = 0
+ section = refentry.find("refnamediv")
+ for refname in section.findall("refname"):
+ if not refentrytitle:
+ refentrytitle = refname.text
+ manpage = refname.text
+ filename = "%s/man%s/%s.%s" % (subdirectory, manvolnum, manpage, manvolnum)
+ if manpage != refentrytitle:
+ manpagetext = ".so %s.%s\n" % (refentrytitle, manvolnum)
+ writefile(filename, manpagetext)
+ else:
+ manpagetext = text
+ writefile(filename, manpagetext)
+ written += 1
+ if not written:
+ manpage = refentrytitle
+ filename = "%s/man%s/%s.%s" % (subdirectory, manvolnum, manpage, manvolnum)
+ writefile(filename, manpagetext)
+
+def writefile(filename, manpagetext):
+ dirname = os.path.dirname(filename)
+ if not os.path.isdir(dirname):
+ logg.debug("mkdir %s", dirname)
+ os.makedirs(dirname)
+ with open(filename, "w") as f:
+ f.write(manpagetext)
+ logg.debug("written %s [%s]", filename, manpagetext.split("\n", 1)[0])
+
+if __name__ == "__main__":
+ from optparse import OptionParser
+ _o = OptionParser("%prog [options] docbookfiles...")
+ _o.add_option("-d","--into", metavar="DIR", default=".",
+ help="specify base directory for output [%default]")
+ _o.add_option("-v","--verbose", action="count", default=0,
+ help="increase logging level [%default]")
+ opt, args = _o.parse_args()
+ logging.basicConfig(level = max(0, logging.WARNING - 10 * opt.verbose))
+ for arg in args:
+ dbk2man(arg, opt.into)
Added: trunk/Build/source/libs/zziplib/zziplib-src/docs/dir-zzip-192.png
===================================================================
(Binary files differ)
Index: trunk/Build/source/libs/zziplib/zziplib-src/docs/dir-zzip-192.png
===================================================================
--- trunk/Build/source/libs/zziplib/zziplib-src/docs/dir-zzip-192.png 2018-03-17 22:23:43 UTC (rev 47003)
+++ trunk/Build/source/libs/zziplib/zziplib-src/docs/dir-zzip-192.png 2018-03-18 00:25:18 UTC (rev 47004)
Property changes on: trunk/Build/source/libs/zziplib/zziplib-src/docs/dir-zzip-192.png
___________________________________________________________________
Added: svn:mime-type
## -0,0 +1 ##
+image/png
\ No newline at end of property
Added: trunk/Build/source/libs/zziplib/zziplib-src/docs/dir-zzip-64.png
===================================================================
(Binary files differ)
Index: trunk/Build/source/libs/zziplib/zziplib-src/docs/dir-zzip-64.png
===================================================================
--- trunk/Build/source/libs/zziplib/zziplib-src/docs/dir-zzip-64.png 2018-03-17 22:23:43 UTC (rev 47003)
+++ trunk/Build/source/libs/zziplib/zziplib-src/docs/dir-zzip-64.png 2018-03-18 00:25:18 UTC (rev 47004)
Property changes on: trunk/Build/source/libs/zziplib/zziplib-src/docs/dir-zzip-64.png
___________________________________________________________________
Added: svn:mime-type
## -0,0 +1 ##
+image/png
\ No newline at end of property
Added: trunk/Build/source/libs/zziplib/zziplib-src/docs/site.htm
===================================================================
--- trunk/Build/source/libs/zziplib/zziplib-src/docs/site.htm (rev 0)
+++ trunk/Build/source/libs/zziplib/zziplib-src/docs/site.htm 2018-03-18 00:25:18 UTC (rev 47004)
@@ -0,0 +1,68 @@
+<html><head><title>zziplib</title>
+ <style>
+ a:link { text-decoration : none ; color : #000080 ; }
+ a:visited { text-decoration : none ; color : #200060 ; }
+ .justify { text-align : justify ; }
+ </style>
+</head><body>
+
+<table width="100%"><tr valign="top"><td bgcolor="#F0F0F0" width="145">
+<center>
+ <big><big><big><b>
+ <font color="#800080"><sup>Z</sup>ZIP<sub>lib</sub></font>
+ </b></big></big></big>
+<br><big><b> <!--VERSION--> </b></big>
+</center>
+<hr> <a href="zzip-index.html">Library</a>
+<br>-<a href="zzip-zip.html">ZIP Access</a>
+<br>-<a href="zzip-file.html">Transparently</a>
+<br>-<a href="zzip-sdl-rwops.html">SDLrwops Example</a>
+<br>-<a href="zzip-extio.html">ext/io Customization</a>
+<br>-<a href="zzip-xor.html">xor/io Obfuscation</a>
+<br>-<a href="zzip-api.html">Library API</a>
+<br>-<a href="zzip-parse.html">Parsing ZIPs</a>
+<br>-<a href="64on32.html">64on32 extras</a>
+<br>-<a href="future.html">Next To Come</a>
+<br>-<a href="configs.html">Config Helpers</a>
+<br>-<a href="sfx-make.html">Making a zip/exe</a>
+<br>-<a href="history.html">Hints And Links</a>
+<br>-<a href="referentials.html">Referentials</a>
+<br> -<a href="zziplib.html">Functions List #</a>
+<!--START-->
+<br> -<a href="man/index.html">The Manual Pages #</a>
+<!--ENDS-->
+
+<br>    <small>(# autogenerated)</small>
+
+<br> <hr>
+
+<br><b><a alt="Tarballs, RPM-archive and windll-ZIPs can be downloaded from"
+ href="http://sourceforge.net/project/showfiles.php?group_id=6389">
+ Download Area *</a></b>
+<br><a alt="Sourceforge Project CVS web access"
+ href="http://zziplib.svn.sourceforge.net/viewvc/zziplib/">Sourceforge SVN</a>
+<br><a alt="Sourceforge Project Index Page"
+ href="http://sourceforge.net/projects/zziplib">Sourceforge Project</a>
+<br><a alt="the zziplib webpage at sourceforge"
+ href="http://zziplib.sourceforge.net">zziplib.sf.net
+ <small><i>Home</i></small></a>
+
+<br><small><a alt="zziplib - license details"
+ href="copying.html">LGPL/MPL license</a></small>
+<br>
+<hr>
+<center><!--START-->
+ <a href="http://sourceforge.net/project/?group_id=6389">
+ <img src="http://sourceforge.net/sflogo.php?group_id=6389&type=2"
+ border="0" alt="sourceforge.net" width="125" height="37">
+ </a>
+</center><!--ENDS-->
+
+<p align="right"><small>
+generated <!--DATE-->
+</small>
+<br> <small>(C)</small> Guido Draheim
+<br><i> guidod<small>@</small>gmx.de</i>
+</p>
+
+</td><td>
Deleted: trunk/Build/source/libs/zziplib/zziplib-src/docs/zzipfseeko.html
===================================================================
--- trunk/Build/source/libs/zziplib/zziplib-src/docs/zzipfseeko.html 2018-03-17 22:23:43 UTC (rev 47003)
+++ trunk/Build/source/libs/zziplib/zziplib-src/docs/zzipfseeko.html 2018-03-18 00:25:18 UTC (rev 47004)
@@ -1,184 +0,0 @@
-<html><head><title>zziplib Library Functions</title>
-</head><body>
-<h2>zziplib Library Functions</h2><p>Version 0.13.68</p><p><big><b><code>#include <zzip/fseeko.h></code></b></big></p><table width="100%"><tr><td valign="top"><code><b><code><a href="#zzip_entry_fopen">zzip_entry_fopen</a></code></b>(ZZIP_ENTRY * entry, int takeover)
- : zzip__new__ ZZIP_ENTRY_FILE *
-</code></td></tr><tr><td valign="top"><code><b><code><a href="#zzip_entry_ffile">zzip_entry_ffile</a></code></b>(FILE * disk, char *filename)
- : zzip__new__ ZZIP_ENTRY_FILE *
-</code></td></tr><tr><td valign="top"><code><b><code><a href="#zzip_entry_fread">zzip_entry_fread</a></code></b>(void *ptr, zzip_size_t sized, zzip_size_t nmemb,
- ZZIP_ENTRY_FILE * file)
- : zzip_size_t
-</code></td></tr><tr><td valign="top"><code><b><code><a href="#zzip_entry_fclose">zzip_entry_fclose</a></code></b>(ZZIP_ENTRY_FILE * file)
- : int
-</code></td></tr><tr><td valign="top"><code><b><code><a href="#zzip_entry_feof">zzip_entry_feof</a></code></b>(ZZIP_ENTRY_FILE * file)
- : int
-</code></td></tr><tr><td valign="top"><code><b><code><a href="#zzip_entry_data_offset">zzip_entry_data_offset</a></code></b>(ZZIP_ENTRY * entry)
- : zzip_off_t
-</code></td></tr><tr><td valign="top"><code><b><code><a href="#zzip_entry_fread_file_header">zzip_entry_fread_file_header</a></code></b>(ZZIP_ENTRY * entry,
- struct zzip_file_header *file_header)
- : static zzip_off_t
-</code></td></tr><tr><td valign="top"><code><b><code><a href="#zzip_entry_strdup_name">zzip_entry_strdup_name</a></code></b>(ZZIP_ENTRY * entry)
- : zzip__new__ char *
-</code></td></tr><tr><td valign="top"><code><b><code><a href="#zzip_entry_findfile">zzip_entry_findfile</a></code></b>(FILE * disk, char *filename,
- ZZIP_ENTRY * _zzip_restrict entry, zzip_strcmp_fn_t compare)
- : zzip__new__ ZZIP_ENTRY *
-</code></td></tr><tr><td valign="top"><code><b><code><a href="#zzip_entry_findfirst">zzip_entry_findfirst</a></code></b>(FILE * disk)
- : zzip__new__ ZZIP_ENTRY *
-</code></td></tr><tr><td valign="top"><code><b><code><a href="#zzip_entry_findnext">zzip_entry_findnext</a></code></b>(ZZIP_ENTRY * _zzip_restrict entry)
- : zzip__new__ ZZIP_ENTRY *
-</code></td></tr><tr><td valign="top"><code><b><code><a href="#zzip_entry_free">zzip_entry_free</a></code></b>(ZZIP_ENTRY * entry)
- : int
-</code></td></tr><tr><td valign="top"><code><b><code><a href="#zzip_entry_findmatch">zzip_entry_findmatch</a></code></b>(FILE * disk, char *filespec,
- ZZIP_ENTRY * _zzip_restrict entry,
- zzip_fnmatch_fn_t compare, int flags)
- : zzip__new__ ZZIP_ENTRY *
-</code></td></tr></table><h3>Documentation</h3><dl><dt><table width="100%"></table></dt><dd><table width="100%"></table></dd><dt><table width="100%"></table></dt><dd><table width="100%"></table></dd><dt><table width="100%"></table></dt><dd><table width="100%"></table></dd><dt><table width="100%"></table></dt><dd><table width="100%"></table></dd><dt><table width="100%"></table></dt><dd><table width="100%"></table></dd><dt><table width="100%"></table></dt><dd><table width="100%"></table></dd><dt><table width="100%"></table></dt><dd><table width="100%"></table></dd><dt><table width="100%"><tr><td valign="top"><code><b><a name="zzip_entry_fopen">zzip_entry_fopen</a></b>(ZZIP_ENTRY * entry, int takeover)
- : zzip__new__ ZZIP_ENTRY_FILE *
-</code></td></tr><tr><td valign="top"><code><b><a name="zzip_entry_ffile">zzip_entry_ffile</a></b>(FILE * disk, char *filename)
- : zzip__new__ ZZIP_ENTRY_FILE *
-</code></td></tr><tr><td valign="top"><code><b><a name="zzip_entry_fread">zzip_entry_fread</a></b>(void *ptr, zzip_size_t sized, zzip_size_t nmemb,
- ZZIP_ENTRY_FILE * file)
- : zzip_size_t
-</code></td></tr><tr><td valign="top"><code><b><a name="zzip_entry_fclose">zzip_entry_fclose</a></b>(ZZIP_ENTRY_FILE * file)
- : int
-</code></td></tr><tr><td valign="top"><code><b><a name="zzip_entry_feof">zzip_entry_feof</a></b>(ZZIP_ENTRY_FILE * file)
- : int
-</code></td></tr></table></dt><dd><table width="100%"><tr><td valign="top"><table border="0" width="100%" cellpadding="0" cellspacing="0"><td> <em> open a file within a zip disk for reading</em> </td><td align="right"> <em><small>zzip/fseeko.c</small></em></td></table><p>
- The <code>zzip_entry_fopen</code> function does take an "entry" argument and copies it (or just takes
- it over as owner) to a new ZZIP_ENTRY_FILE handle structure. That
- structure contains also a zlib buffer for decoding. The <code>zzip_entry_fopen</code> function does
- seek to the file_header of the given "entry" and validates it for the
- data buffer following it. We do also prefetch some data from the data
- buffer thereby trying to match the disk pagesize for faster access later.
- The <code><a href="#zzip_entry_fread">zzip_entry_fread</a></code> will then read in chunks of pagesizes which is
- the size of the internal readahead buffer. If an error occurs then null
- is returned.
-</p>
-</td></tr><tr><td valign="top"><p>
- The <code>zzip_entry_ffile</code> function opens a file found by name, so it does a search into
- the zip central directory with <code><a href="#zzip_entry_findfile">zzip_entry_findfile</a></code> and whatever
- is found first is given to <code><a href="#zzip_entry_fopen">zzip_entry_fopen</a></code>
-</p>
-</td></tr><tr><td valign="top"><p>
- The <code>zzip_entry_fread</code> function reads more bytes into the output buffer specified as
- arguments. The return value is null on eof or error, the stdio-like
- interface can not distinguish between these so you need to check
- with <code><a href="#zzip_entry_feof">zzip_entry_feof</a></code> for the difference.
-</p>
-</td></tr><tr><td valign="top"><p> The <code>zzip_entry_fclose</code> function releases any zlib decoder info needed for decompression
- and dumps the ZZIP_ENTRY_FILE struct then.
-</p>
-</td></tr><tr><td valign="top"><p>
- The <code>zzip_entry_feof</code> function allows to distinguish an error from an eof condition.
- Actually, if we found an error but we did already reach eof then we
- just keep on saying that it was an eof, so the app can just continue.
-</p>
-</td></tr></table></dd><dt><table width="100%"></table></dt><dd><table width="100%"></table></dd><dt><table width="100%"><tr><td valign="top"><code><b><a name="zzip_entry_data_offset">zzip_entry_data_offset</a></b>(ZZIP_ENTRY * entry)
- : zzip_off_t
-</code></td></tr><tr><td valign="top"><code><b><a name="zzip_entry_fread_file_header">zzip_entry_fread_file_header</a></b>(ZZIP_ENTRY * entry,
- struct zzip_file_header *file_header)
- : static zzip_off_t
-</code></td></tr><tr><td valign="top"><code><b><a name="zzip_entry_strdup_name">zzip_entry_strdup_name</a></b>(ZZIP_ENTRY * entry)
- : zzip__new__ char *
-</code></td></tr></table></dt><dd><table width="100%"><tr><td valign="top"><table border="0" width="100%" cellpadding="0" cellspacing="0"><td> <em> helper functions for (fseeko) zip access api</em> </td><td align="right"> <em><small>zzip/fseeko.c</small></em></td></table><p>
- The <code>zzip_entry_data_offset</code> functions returns the seekval offset of the data portion of the
- file referenced by the given zzip_entry. It requires an intermediate
- check of the file_header structure (i.e. it reads it from disk). After
- this call, the contained diskfile readposition is already set to the
- data_offset returned here.
-</p><p>The <code>zzip_entry_data_offset</code> function
- Returns -1 on error. (errno = EINVAL|EBADMSG)
-</p>
-</td></tr><tr><td valign="top"><p> The <code>zzip_entry_fread_file_header</code> functions read the correspoding struct zzip_file_header from
- the zip disk of the given "entry". The returned off_t points to the
- end of the file_header where the current fseek pointer has stopped.
- This is used to immediately parse out any filename/extras block following
- the file_header.
-</p><p>The <code>zzip_entry_fread_file_header</code> function
- Returns zero on error. (errno = EINVAL|EBADMSG|EBADF|EIO)
-</p>
-</td></tr><tr><td valign="top"><p> The <code>zzip_entry_strdup_name</code> function is a big helper despite its little name: in a zip file the
- encoded filenames are usually NOT zero-terminated but for common usage
- with libc we need it that way. Secondly, the filename SHOULD be present
- in the zip central directory but if not then we fallback to the filename
- given in the file_header of each compressed data portion.
-</p><p>
- returns: new string buffer, null on error (errno = EINVAL|ENOMEM|EBADMSG)
-</p>
-</td></tr></table></dd><dt><table width="100%"></table></dt><dd><table width="100%"></table></dd><dt><table width="100%"></table></dt><dd><table width="100%"></table></dd><dt><table width="100%"></table></dt><dd><table width="100%"></table></dd><dt><table width="100%"></table></dt><dd><table width="100%"></table></dd><dt><table width="100%"></table></dt><dd><table width="100%"></table></dd><dt><table width="100%"></table></dt><dd><table width="100%"></table></dd><dt><table width="100%"></table></dt><dd><table width="100%"></table></dd><dt><table width="100%"></table></dt><dd><table width="100%"></table></dd><dt><table width="100%"></table></dt><dd><table width="100%"></table></dd><dt><table width="100%"></table></dt><dd><table width="100%"></table></dd><dt><table width="100%"></table></dt><dd><table width="100%"></table></dd><dt><table width="100%"></table></dt><dd><table width="100%"></table></dd><dt><table width="100%"><tr><td valign="top"><code><b><a name="zzip_entry_findfile">zzip_entry_findfile</a></b>(FILE * disk, char *filename,
- ZZIP_ENTRY * _zzip_restrict entry, zzip_strcmp_fn_t compare)
- : zzip__new__ ZZIP_ENTRY *
-</code></td></tr><tr><td valign="top"><code><b><a name="zzip_entry_findfirst">zzip_entry_findfirst</a></b>(FILE * disk)
- : zzip__new__ ZZIP_ENTRY *
-</code></td></tr><tr><td valign="top"><code><b><a name="zzip_entry_findnext">zzip_entry_findnext</a></b>(ZZIP_ENTRY * _zzip_restrict entry)
- : zzip__new__ ZZIP_ENTRY *
-</code></td></tr><tr><td valign="top"><code><b><a name="zzip_entry_free">zzip_entry_free</a></b>(ZZIP_ENTRY * entry)
- : int
-</code></td></tr><tr><td valign="top"><code><b><a name="zzip_entry_findmatch">zzip_entry_findmatch</a></b>(FILE * disk, char *filespec,
- ZZIP_ENTRY * _zzip_restrict entry,
- zzip_fnmatch_fn_t compare, int flags)
- : zzip__new__ ZZIP_ENTRY *
-</code></td></tr></table></dt><dd><table width="100%"><tr><td valign="top"><table border="0" width="100%" cellpadding="0" cellspacing="0"><td> <em> search for files in the (fseeko) zip central directory</em> </td><td align="right"> <em><small>zzip/fseeko.c</small></em></td></table><p>
- The <code>zzip_entry_findfile</code> function is given a filename as an additional argument, to find the
- disk_entry matching a given filename. The compare-function is usually
- strcmp or strcasecmp or perhaps strcoll, if null then strcmp is used.
- - use null as argument for "old"-entry when searching the first
- matching entry, otherwise the last returned value if you look for other
- entries with a special "compare" function (if null then a doubled search
- is rather useless with this variant of _findfile). If no further entry is
- found then null is returned and any "old"-entry gets already free()d.
-</p>
-</td></tr><tr><td valign="top"><p>
- The <code>zzip_entry_findfirst</code> function is the first call of all the zip access functions here.
- It contains the code to find the first entry of the zip central directory.
- Here we require the stdio handle to represent a real zip file where the
- disk_trailer is _last_ in the file area, so that its position would be at
- a fixed offset from the end of the file area if not for the comment field
- allowed to be of variable length (which needs us to do a little search
- for the disk_tailer). However, in this simple implementation we disregard
- any disk_trailer info telling about multidisk archives, so we just return
- a pointer to the first entry in the zip central directory of that file.
-</p><p>
- For an actual means, we are going to search backwards from the end
- of the mmaped block looking for the PK-magic signature of a
- disk_trailer. If we see one then we check the rootseek value to
- find the first disk_entry of the root central directory. If we find
- the correct PK-magic signature of a disk_entry over there then we
- assume we are done and we are going to return a pointer to that label.
-</p><p>
- The return value is a pointer to the first zzip_disk_entry being checked
- to be within the bounds of the file area specified by the arguments. If
- no disk_trailer was found then null is returned, and likewise we only
- accept a disk_trailer with a seekvalue that points to a disk_entry and
- both parts have valid PK-magic parts. Beyond some sanity check we try to
- catch a common brokeness with zip archives that still allows us to find
- the start of the zip central directory.
-</p><p>The <code>zzip_entry_findfirst</code> function
- Returns null on error (errno = EINVAL|ENOMEM|EBADMSG|EBADF|ENOENT)
-</p>
-</td></tr><tr><td valign="top"><p>
- The <code>zzip_entry_findnext</code> function takes an existing "entry" in the central root directory
- (e.g. from zzip_entry_findfirst) and moves it to point to the next entry.
- On error it returns 0, otherwise the old entry. If no further match is
- found then null is returned and the entry already free()d. If you want
- to stop searching for matches before that case then please call
- <code><a href="#zzip_entry_free">zzip_entry_free</a></code> on the cursor struct ZZIP_ENTRY.
-</p>
-</td></tr><tr><td valign="top"><p> the <code>zzip_entry_free</code> function releases the malloc()ed areas needed for zzip_entry, the
- pointer is invalid afterwards. The <code>zzip_entry_free</code> function has #define synonyms of
- zzip_entry_findlast(), zzip_entry_findlastfile(), zzip_entry_findlastmatch()
-</p>
-</td></tr><tr><td valign="top"><p>
- The <code>zzip_entry_findmatch</code> function uses a compare-function with an additional argument
- and it is called just like fnmatch(3) from POSIX.2 AD:1993), i.e.
- the argument filespec first and the ziplocal filename second with
- the integer-flags put in as third to the indirect call. If the
- platform has fnmatch available then null-compare will use that one
- and otherwise we fall back to mere strcmp, so if you need fnmatch
- searching then please provide an implementation somewhere else.
- - use null as argument for "after"-entry when searching the first
- matching entry, or the last disk_entry return-value to find the
- next entry matching the given filespec. If no further entry is
- found then null is returned and any "old"-entry gets already free()d.
-</p>
-</td></tr></table></dd><dt><table width="100%"></table></dt><dd><table width="100%"></table></dd><dt><table width="100%"></table></dt><dd><table width="100%"></table></dd><dt><table width="100%"></table></dt><dd><table width="100%"></table></dd><dt><table width="100%"></table></dt><dd><table width="100%"></table></dd><dt><table width="100%"></table></dt><dd><table width="100%"></table></dd><dt><table width="100%"></table></dt><dd><table width="100%"></table></dd><dt><table width="100%"></table></dt><dd><table width="100%"></table></dd><dt><table width="100%"></table></dt><dd><table width="100%"></table></dd><dt><table width="100%"></table></dt><dd><table width="100%"></table></dd><dt><table width="100%"></table></dt><dd><table width="100%"></table></dd><dt><table width="100%"></table></dt><dd><table width="100%"></table></dd><dt><table width="100%"></table></dt><dd><table width="100%"></table></dd><dt><table width="100%"></table></dt><dd><table width="100%"></table></dd><dt><table width="100%"></table></dt><dd><table width="100%"></table></dd><dt><table width="100%"></table></dt><dd><table width="100%"></table></dd><dt><table width="100%"></table></dt><dd><table width="100%"></table></dd><dt><table width="100%"></table></dt><dd><table width="100%"></table></dd><dt><table width="100%"></table></dt><dd><table width="100%"></table></dd><dt><table width="100%"></table></dt><dd><table width="100%"></table></dd><dt><table width="100%"></table></dt><dd><table width="100%"></table></dd><dt><table width="100%"></table></dt><dd><table width="100%"></table></dd><dt><table width="100%"></table></dt><dd><table width="100%"></table></dd><dt><table width="100%"></table></dt><dd><table width="100%"></table></dd><dt><table width="100%"></table></dt><dd><table width="100%"></table></dd><dt><table width="100%"></table></dt><dd><table width="100%"></table></dd><dt><table width="100%"></table></dt><dd><table width="100%"></table></dd><dt><table width="100%"></table></dt><dd><table width="100%"></table></dd><dt><table width=!
"100%"></table></dt><dd><table width="100%"></table></dd></dl>
-</body></html>
Deleted: trunk/Build/source/libs/zziplib/zziplib-src/docs/zziplib-manpages.tar
===================================================================
(Binary files differ)
Deleted: trunk/Build/source/libs/zziplib/zziplib-src/docs/zzipmmapped.html
===================================================================
--- trunk/Build/source/libs/zziplib/zziplib-src/docs/zzipmmapped.html 2018-03-17 22:23:43 UTC (rev 47003)
+++ trunk/Build/source/libs/zziplib/zziplib-src/docs/zzipmmapped.html 2018-03-18 00:25:18 UTC (rev 47004)
@@ -1,263 +0,0 @@
-<html><head><title>zziplib Library Functions</title>
-</head><body>
-<h2>zziplib Library Functions</h2><p>Version 0.13.68</p><p><big><b><code>#include <zzip/mmapped.h></code></b></big></p><table width="100%"><tr><td valign="top"><code><b><code><a href="#zzip_disk_entry_to_data">zzip_disk_entry_to_data</a></code></b>(ZZIP_DISK * disk, struct zzip_disk_entry * entry)
- : zzip_byte_t *
-</code></td></tr><tr><td valign="top"><code><b><code><a href="#zzip_disk_entry_to_file_header">zzip_disk_entry_to_file_header</a></code></b>(ZZIP_DISK * disk, struct zzip_disk_entry *entry)
- : struct zzip_file_header *
-</code></td></tr><tr><td valign="top"><code><b><code><a href="#zzip_disk_entry_strdup_name">zzip_disk_entry_strdup_name</a></code></b>(ZZIP_DISK * disk, struct zzip_disk_entry *entry)
- : zzip__new__ char *
-</code></td></tr><tr><td valign="top"><code><b><code><a href="#zzip_disk_entry_strdup_comment">zzip_disk_entry_strdup_comment</a></code></b>(ZZIP_DISK * disk, struct zzip_disk_entry *entry)
- : zzip__new__ char *
-</code></td></tr><tr><td valign="top"><code><b><code><a href="#zzip_disk_findfile">zzip_disk_findfile</a></code></b>(ZZIP_DISK * disk, char *filename,
- struct zzip_disk_entry *after, zzip_strcmp_fn_t compare)
- : struct zzip_disk_entry *
-</code></td></tr><tr><td valign="top"><code><b><code><a href="#zzip_disk_findfirst">zzip_disk_findfirst</a></code></b>(ZZIP_DISK * disk)
- : struct zzip_disk_entry *
-</code></td></tr><tr><td valign="top"><code><b><code><a href="#zzip_disk_findnext">zzip_disk_findnext</a></code></b>(ZZIP_DISK * disk, struct zzip_disk_entry *entry)
- : struct zzip_disk_entry *
-</code></td></tr><tr><td valign="top"><code><b><code><a href="#zzip_disk_findmatch">zzip_disk_findmatch</a></code></b>(ZZIP_DISK * disk, char *filespec,
- struct zzip_disk_entry *after,
- zzip_fnmatch_fn_t compare, int flags)
- : struct zzip_disk_entry *
-</code></td></tr><tr><td valign="top"><code><b><code><a href="#zzip_disk_fopen">zzip_disk_fopen</a></code></b>(ZZIP_DISK * disk, char *filename)
- : zzip__new__ ZZIP_DISK_FILE *
-</code></td></tr><tr><td valign="top"><code><b><code><a href="#zzip_disk_entry_fopen">zzip_disk_entry_fopen</a></code></b>(ZZIP_DISK * disk, ZZIP_DISK_ENTRY * entry)
- : zzip__new__ ZZIP_DISK_FILE *
-</code></td></tr><tr><td valign="top"><code><b><code><a href="#zzip_disk_fread">zzip_disk_fread</a></code></b>(void *ptr, zzip_size_t sized, zzip_size_t nmemb,
- ZZIP_DISK_FILE * file)
- : zzip_size_t
-</code></td></tr><tr><td valign="top"><code><b><code><a href="#zzip_disk_fclose">zzip_disk_fclose</a></code></b>(ZZIP_DISK_FILE * file)
- : int
-</code></td></tr><tr><td valign="top"><code><b><code><a href="#zzip_disk_feof">zzip_disk_feof</a></code></b>(ZZIP_DISK_FILE * file)
- : int
-</code></td></tr><tr><td valign="top"><code><b><code><a href="#zzip_disk_mmap">zzip_disk_mmap</a></code></b>(int fd)
- : zzip__new__ ZZIP_DISK *
-</code></td></tr><tr><td valign="top"><code><b><code><a href="#zzip_disk_init">zzip_disk_init</a></code></b>(ZZIP_DISK * disk, void *buffer, zzip_size_t buflen)
- : int
-</code></td></tr><tr><td valign="top"><code><b><code><a href="#zzip_disk_new">zzip_disk_new</a></code></b>(void)
- : zzip__new__ ZZIP_DISK *
-</code></td></tr><tr><td valign="top"><code><b><code><a href="#zzip_disk_munmap">zzip_disk_munmap</a></code></b>(ZZIP_DISK * disk)
- : int
-</code></td></tr><tr><td valign="top"><code><b><code><a href="#zzip_disk_open">zzip_disk_open</a></code></b>(char *filename)
- : zzip__new__ ZZIP_DISK *
-</code></td></tr><tr><td valign="top"><code><b><code><a href="#zzip_disk_buffer">zzip_disk_buffer</a></code></b>(void *buffer, size_t buflen) : zzip__new__ ZZIP_DISK *
-</code></td></tr><tr><td valign="top"><code><b><code><a href="#zzip_disk_close">zzip_disk_close</a></code></b>(ZZIP_DISK * disk)
- : int
-</code></td></tr></table><h3>Documentation</h3><dl><dt><table width="100%"><tr><td valign="top"><code><b><a name="zzip_disk_entry_to_data">zzip_disk_entry_to_data</a></b>(ZZIP_DISK * disk, struct zzip_disk_entry * entry)
- : zzip_byte_t *
-</code></td></tr><tr><td valign="top"><code><b><a name="zzip_disk_entry_to_file_header">zzip_disk_entry_to_file_header</a></b>(ZZIP_DISK * disk, struct zzip_disk_entry *entry)
- : struct zzip_file_header *
-</code></td></tr><tr><td valign="top"><code><b><a name="zzip_disk_entry_strdup_name">zzip_disk_entry_strdup_name</a></b>(ZZIP_DISK * disk, struct zzip_disk_entry *entry)
- : zzip__new__ char *
-</code></td></tr><tr><td valign="top"><code><b><a name="zzip_disk_entry_strdup_comment">zzip_disk_entry_strdup_comment</a></b>(ZZIP_DISK * disk, struct zzip_disk_entry *entry)
- : zzip__new__ char *
-</code></td></tr></table></dt><dd><table width="100%"><tr><td valign="top"><table border="0" width="100%" cellpadding="0" cellspacing="0"><td> <em> helper functions for (mmapped) zip access api</em> </td><td align="right"> <em><small>zzip/mmapped.c</small></em></td></table><p>
- The <code>zzip_disk_entry_to_data</code> function augments the other zzip_disk_entry_* helpers: here we move
- a disk_entry pointer (as returned by _find* functions) into a pointer to
- the data block right after the file_header. Only disk->buffer would be
- needed to perform the seek but we check the mmapped range end as well.
-</p><p>
- The <code>zzip_disk_entry_to_data</code> function returns a pointer into disk->buffer or 0 on error (errno).
-</p>
-</td></tr><tr><td valign="top"><p> The <code>zzip_disk_entry_to_file_header</code> function does half the job of <code><a href="#zzip_disk_entry_to_data">zzip_disk_entry_to_data</a></code> where it
- can augment with <code><u>zzip_file_header_to_data</u></code> helper from format/fetch.h
-</p><p>
- The <code>zzip_disk_entry_to_file_header</code> function returns a pointer into disk->buffer or 0 on error (errno).
-</p>
-</td></tr><tr><td valign="top"><p> The <code>zzip_disk_entry_strdup_name</code> function is a big helper despite its little name: in a zip file the
- encoded filenames are usually NOT zero-terminated but for common usage
- with libc we need it that way. Secondly, the filename SHOULD be present
- in the zip central directory but if not then we fallback to the filename
- given in the file_header of each compressed data portion.
-</p><p>
- The <code>zzip_disk_entry_strdup_name</code> function returns a new string buffer, or null on error.
- If no name can be found then an empty string is returned.
-</p>
-</td></tr><tr><td valign="top"><p> The <code>zzip_disk_entry_strdup_comment</code> function is similar creating a reference to a zero terminated
- string but it can only exist in the zip central directory entry.
-</p><p>
- The <code>zzip_disk_entry_strdup_comment</code> function returns a new string buffer, or null on error (errno).
- If no name can be found then an empty string is returned.
-</p>
-</td></tr></table></dd><dt><table width="100%"></table></dt><dd><table width="100%"></table></dd><dt><table width="100%"><tr><td valign="top"><code><b><a name="zzip_disk_findfile">zzip_disk_findfile</a></b>(ZZIP_DISK * disk, char *filename,
- struct zzip_disk_entry *after, zzip_strcmp_fn_t compare)
- : struct zzip_disk_entry *
-</code></td></tr><tr><td valign="top"><code><b><a name="zzip_disk_findfirst">zzip_disk_findfirst</a></b>(ZZIP_DISK * disk)
- : struct zzip_disk_entry *
-</code></td></tr><tr><td valign="top"><code><b><a name="zzip_disk_findnext">zzip_disk_findnext</a></b>(ZZIP_DISK * disk, struct zzip_disk_entry *entry)
- : struct zzip_disk_entry *
-</code></td></tr><tr><td valign="top"><code><b><a name="zzip_disk_findmatch">zzip_disk_findmatch</a></b>(ZZIP_DISK * disk, char *filespec,
- struct zzip_disk_entry *after,
- zzip_fnmatch_fn_t compare, int flags)
- : struct zzip_disk_entry *
-</code></td></tr></table></dt><dd><table width="100%"><tr><td valign="top"><table border="0" width="100%" cellpadding="0" cellspacing="0"><td> <em> search for files in the (mmapped) zip central directory</em> </td><td align="right"> <em><small>zzip/mmapped.c</small></em></td></table><p>
- The <code>zzip_disk_findfile</code> function is given a filename as an additional argument, to find the
- disk_entry matching a given filename. The compare-function is usually
- strcmp or strcasecmp or perhaps strcoll, if null then strcmp is used.
- - use null as argument for "after"-entry when searching the first
- matching entry, otherwise the last returned value if you look for other
- entries with a special "compare" function (if null then a doubled search
- is rather useless with this variant of _findfile).
-</p><p>
- The <code>zzip_disk_findfile</code> functionreturns the entry pointer.
- The <code>zzip_disk_findfile</code> function may return null on error. (errno = ENOMEM|EBADMSG|ENOENT)
-</p>
-</td></tr><tr><td valign="top"><p>
- The <code>zzip_disk_findfirst</code> function is the first call of all the zip access functions here.
- It contains the code to find the first entry of the zip central directory.
- Here we require the mmapped block to represent a real zip file where the
- disk_trailer is _last_ in the file area, so that its position would be at
- a fixed offset from the end of the file area if not for the comment field
- allowed to be of variable length (which needs us to do a little search
- for the disk_tailer). However, in this simple implementation we disregard
- any disk_trailer info telling about multidisk archives, so we just return
- a pointer to the zip central directory.
-</p><p>
- For an actual means, we are going to search backwards from the end
- of the mmaped block looking for the PK-magic signature of a
- disk_trailer. If we see one then we check the rootseek value to
- find the first disk_entry of the root central directory. If we find
- the correct PK-magic signature of a disk_entry over there then we
- assume we are done and we are going to return a pointer to that label.
-</p><p>
- The return value is a pointer to the first zzip_disk_entry being checked
- to be within the bounds of the file area specified by the arguments. If
- no disk_trailer was found then null is returned, and likewise we only
- accept a disk_trailer with a seekvalue that points to a disk_entry and
- both parts have valid PK-magic parts. Beyond some sanity check we try to
- catch a common brokeness with zip archives that still allows us to find
- the start of the zip central directory.So the <code>zzip_disk_findfirst</code> function may return null
- and sets errno.
-</p>
-</td></tr><tr><td valign="top"><p>
- The <code>zzip_disk_findnext</code> function takes an existing disk_entry in the central root directory
- (e.g. from zzip_disk_findfirst) and returns the next entry within in
- the given bounds of the mmapped file area.
-</p><p>
- The <code>zzip_disk_findnext</code> function returns null if no next entry can be found.
- The <code>zzip_disk_findnext</code> function may return null on errors. (errno = ENOENT|EINVAL|EBADMSG)
-</p>
-</td></tr><tr><td valign="top"><p>
- The <code>zzip_disk_findmatch</code> function uses a compare-function with an additional argument
- and it is called just like fnmatch(3) from POSIX.2 AD:1993), i.e.
- the argument filespec first and the ziplocal filename second with
- the integer-flags put in as third to the indirect call. If the
- platform has fnmatch available then null-compare will use that one
- and otherwise we fall back to mere strcmp, so if you need fnmatch
- searching then please provide an implementation somewhere else.
- - use null as argument for "after"-entry when searching the first
- matching entry, or the last disk_entry return-value to find the
- next entry matching the given filespec.
-</p><p>
- The <code>zzip_disk_findmatch</code> function will return the matching entry pointer.
- The <code>zzip_disk_findmatch</code> function may return null on error. (errno = ENOMEM|EBADMSG|ENOENT)
-</p>
-</td></tr></table></dd><dt><table width="100%"></table></dt><dd><table width="100%"></table></dd><dt><table width="100%"></table></dt><dd><table width="100%"></table></dd><dt><table width="100%"></table></dt><dd><table width="100%"></table></dd><dt><table width="100%"><tr><td valign="top"><code><b><a name="zzip_disk_fopen">zzip_disk_fopen</a></b>(ZZIP_DISK * disk, char *filename)
- : zzip__new__ ZZIP_DISK_FILE *
-</code></td></tr><tr><td valign="top"><code><b><a name="zzip_disk_entry_fopen">zzip_disk_entry_fopen</a></b>(ZZIP_DISK * disk, ZZIP_DISK_ENTRY * entry)
- : zzip__new__ ZZIP_DISK_FILE *
-</code></td></tr><tr><td valign="top"><code><b><a name="zzip_disk_fread">zzip_disk_fread</a></b>(void *ptr, zzip_size_t sized, zzip_size_t nmemb,
- ZZIP_DISK_FILE * file)
- : zzip_size_t
-</code></td></tr><tr><td valign="top"><code><b><a name="zzip_disk_fclose">zzip_disk_fclose</a></b>(ZZIP_DISK_FILE * file)
- : int
-</code></td></tr><tr><td valign="top"><code><b><a name="zzip_disk_feof">zzip_disk_feof</a></b>(ZZIP_DISK_FILE * file)
- : int
-</code></td></tr></table></dt><dd><table width="100%"><tr><td valign="top"><table border="0" width="100%" cellpadding="0" cellspacing="0"><td> <em> openening a file part wrapped within a (mmapped) zip archive</em> </td><td align="right"> <em><small>zzip/mmapped.c</small></em></td></table><p>
- The <code>zzip_disk_fopen</code> function opens a file found by name, so it does a search into
- the zip central directory with <code><a href="#zzip_disk_findfile">zzip_disk_findfile</a></code> and whatever
- is found first is given to <code><a href="#zzip_disk_entry_fopen">zzip_disk_entry_fopen</a></code>
-</p><p>
- The <code>zzip_disk_fopen</code> function may return null on errors (errno).
-</p>
-</td></tr><tr><td valign="top"><p>
- the ZZIP_DISK_FILE* is rather simple in just encapsulating the
- arguments given to the <code>zzip_disk_entry_fopen</code> function plus a zlib deflate buffer.
- Note that the ZZIP_DISK pointer does already contain the full
- mmapped file area of a zip disk, so open()ing a file part within
- that area happens to be a lookup of its bounds and encoding. That
- information is memorized on the ZZIP_DISK_FILE so that subsequent
- _read() operations will be able to get the next data portion or
- return an eof condition for that file part wrapped in the zip archive.
-</p><p>
- The <code>zzip_disk_entry_fopen</code> function may return null on errors (errno = ENOMEM|EBADMSG).
-</p>
-</td></tr><tr><td valign="top"><p>
- The <code>zzip_disk_fread</code> function reads more bytes into the output buffer specified as
- arguments. The return value is null on eof or error, the stdio-like
- interface can not distinguish between these so you need to check
- with <code><a href="#zzip_disk_feof">zzip_disk_feof</a></code> for the difference.
-</p>
-</td></tr><tr><td valign="top"><p> The <code>zzip_disk_fclose</code> function releases any zlib decoder info needed for decompression
- and dumps the ZZIP_DISK_FILE* then.
-</p><p>
- The <code>zzip_disk_fclose</code> function always returns 0.
-</p>
-</td></tr><tr><td valign="top"><p>
- The <code>zzip_disk_feof</code> function allows to distinguish an error from an eof condition.
- Actually, if we found an error but we did already reach eof then we
- just keep on saying that it was an eof, so the app can just continue.
-</p><p>
- The <code>zzip_disk_feof</code> function returns EOF in case and 0 when not at the end
- of file.
-</p>
-</td></tr></table></dd><dt><table width="100%"></table></dt><dd><table width="100%"></table></dd><dt><table width="100%"></table></dt><dd><table width="100%"></table></dd><dt><table width="100%"></table></dt><dd><table width="100%"></table></dd><dt><table width="100%"><tr><td valign="top"><code><b><a name="zzip_disk_mmap">zzip_disk_mmap</a></b>(int fd)
- : zzip__new__ ZZIP_DISK *
-</code></td></tr><tr><td valign="top"><code><b><a name="zzip_disk_init">zzip_disk_init</a></b>(ZZIP_DISK * disk, void *buffer, zzip_size_t buflen)
- : int
-</code></td></tr><tr><td valign="top"><code><b><a name="zzip_disk_new">zzip_disk_new</a></b>(void)
- : zzip__new__ ZZIP_DISK *
-</code></td></tr><tr><td valign="top"><code><b><a name="zzip_disk_munmap">zzip_disk_munmap</a></b>(ZZIP_DISK * disk)
- : int
-</code></td></tr><tr><td valign="top"><code><b><a name="zzip_disk_open">zzip_disk_open</a></b>(char *filename)
- : zzip__new__ ZZIP_DISK *
-</code></td></tr><tr><td valign="top"><code><b><a name="zzip_disk_buffer">zzip_disk_buffer</a></b>(void *buffer, size_t buflen) : zzip__new__ ZZIP_DISK *
-</code></td></tr><tr><td valign="top"><code><b><a name="zzip_disk_close">zzip_disk_close</a></b>(ZZIP_DISK * disk)
- : int
-</code></td></tr></table></dt><dd><table width="100%"><tr><td valign="top"><table border="0" width="100%" cellpadding="0" cellspacing="0"><td> <em> turn a filehandle into a mmapped zip disk archive handle</em> </td><td align="right"> <em><small>zzip/mmapped.c</small></em></td></table><p>
- The <code>zzip_disk_mmap</code> function uses the given file-descriptor to detect the length of the
- file and calls the system <a href="http://www.opengroup.org/onlinepubs/000095399/functions/mmap.html"><code>mmap(2)</code></a> to put it in main memory. If it is
- successful then a newly allocated ZZIP_DISK* is returned with
- disk->buffer pointing to the mapview of the zipdisk content.
-</p><p>
- The <code>zzip_disk_mmap</code> function may return null on errors (errno).
-</p>
-</td></tr><tr><td valign="top"><p> The <code>zzip_disk_init</code> function does primary initialization of a disk-buffer struct.
-</p><p>
- The <code>zzip_disk_init</code> function always returns 0 as success.
-</p>
-</td></tr><tr><td valign="top"><p> The <code>zzip_disk_new</code> function allocates a new disk-buffer with <a href="http://www.opengroup.org/onlinepubs/000095399/functions/malloc.html"><code>malloc(3)</code></a>
-</p><p>
- The <code>zzip_disk_new</code> function may return null on errors (errno).
-</p>
-</td></tr><tr><td valign="top"><p> The <code>zzip_disk_munmap</code> function is the inverse of <code><a href="#zzip_disk_mmap">zzip_disk_mmap</a></code> and using the system
- munmap(2) on the buffer area and <a href="http://www.opengroup.org/onlinepubs/000095399/functions/free.html"><code>free(3)</code></a> on the ZZIP_DISK structure.
-</p>
-</td></tr><tr><td valign="top"><p>
- The <code>zzip_disk_open</code> function opens the given archive by name and turn the filehandle
- to <code><a href="#zzip_disk_mmap">zzip_disk_mmap</a></code> for bringing it to main memory. If it can not
- be <a href="http://www.opengroup.org/onlinepubs/000095399/functions/mmap.html"><code>mmap(2)</code></a>'ed then we slurp the whole file into a newly <a href="http://www.opengroup.org/onlinepubs/000095399/functions/malloc.html"><code>malloc(2)</code></a>'ed
- memory block. Only if that fails too then we return null. Since handling
- of disk->buffer is ambiguous it should not be snatched away please.
-</p><p>
- The <code>zzip_disk_open</code> function may return null on errors (errno).
-</p>
-</td></tr><tr><td valign="top"><p> The <code>zzip_disk_buffer</code> function will attach a buffer with a zip image
- that was acquired from another source than a file.
- Note that if zzip_disk_mmap fails then zzip_disk_open
- will fall back and try to read the full file to memory
- wrapping a ZZIP_DISK around the memory buffer just as
- the <code>zzip_disk_buffer</code> function will do. Note that the <code>zzip_disk_buffer</code> function will not
- own the buffer, it will neither be written nor free()d.
-</p><p>
- The <code>zzip_disk_buffer</code> function may return null (errno).
-</p>
-</td></tr><tr><td valign="top"><p>
- The <code>zzip_disk_close</code> function will release all data needed to access a (mmapped)
- zip archive, including any malloc()ed blocks, sharedmem mappings
- and it dumps the handle struct as well.
-</p><p>
- The <code>zzip_disk_close</code> function returns 0 on success (or whatever <code><u>munmap</u></code> says).
-</p>
-</td></tr></table></dd><dt><table width="100%"></table></dt><dd><table width="100%"></table></dd><dt><table width="100%"></table></dt><dd><table width="100%"></table></dd><dt><table width="100%"></table></dt><dd><table width="100%"></table></dd><dt><table width="100%"></table></dt><dd><table width="100%"></table></dd><dt><table width="100%"></table></dt><dd><table width="100%"></table></dd><dt><table width="100%"></table></dt><dd><table width="100%"></table></dd><dt><table width="100%"></table></dt><dd><table width="100%"></table></dd><dt><table width="100%"></table></dt><dd><table width="100%"></table></dd><dt><table width="100%"></table></dt><dd><table width="100%"></table></dd><dt><table width="100%"></table></dt><dd><table width="100%"></table></dd><dt><table width="100%"></table></dt><dd><table width="100%"></table></dd><dt><table width="100%"></table></dt><dd><table width="100%"></table></dd><dt><table width="100%"></table></dt><dd><table width="100%"></table></dd><dt><table width="100%"></table></dt><dd><table width="100%"></table></dd><dt><table width="100%"></table></dt><dd><table width="100%"></table></dd><dt><table width="100%"></table></dt><dd><table width="100%"></table></dd><dt><table width="100%"></table></dt><dd><table width="100%"></table></dd><dt><table width="100%"></table></dt><dd><table width="100%"></table></dd><dt><table width="100%"></table></dt><dd><table width="100%"></table></dd><dt><table width="100%"></table></dt><dd><table width="100%"></table></dd><dt><table width="100%"></table></dt><dd><table width="100%"></table></dd><dt><table width="100%"></table></dt><dd><table width="100%"></table></dd><dt><table width="100%"></table></dt><dd><table width="100%"></table></dd><dt><table width="100%"></table></dt><dd><table width="100%"></table></dd><dt><table width="100%"></table></dt><dd><table width="100%"></table></dd><dt><table width="100%"></table></dt><dd><table width="100%"></table></dd><dt><table width="100%"></table></dt><dd><table width="100%"></table></dd><dt><table width=!
"100%"></table></dt><dd><table width="100%"></table></dd><dt><table width="100%"></table></dt><dd><table width="100%"></table></dd><dt><table width="100%"></table></dt><dd><table width="100%"></table></dd><dt><table width="100%"></table></dt><dd><table width="100%"></table></dd><dt><table width="100%"></table></dt><dd><table width="100%"></table></dd><dt><table width="100%"></table></dt><dd><table width="100%"></table></dd><dt><table width="100%"></table></dt><dd><table width="100%"></table></dd><dt><table width="100%"></table></dt><dd><table width="100%"></table></dd><dt><table width="100%"></table></dt><dd><table width="100%"></table></dd><dt><table width="100%"></table></dt><dd><table width="100%"></table></dd><dt><table width="100%"></table></dt><dd><table width="100%"></table></dd><dt><table width="100%"></table></dt><dd><table width="100%"></table></dd><dt><table width="100%"></table></dt><dd><table width="100%"></table></dd></dl>
-</body></html>
Added: trunk/Build/source/libs/zziplib/zziplib-src/m4/ax_check_enable_debug.m4
===================================================================
--- trunk/Build/source/libs/zziplib/zziplib-src/m4/ax_check_enable_debug.m4 (rev 0)
+++ trunk/Build/source/libs/zziplib/zziplib-src/m4/ax_check_enable_debug.m4 2018-03-18 00:25:18 UTC (rev 47004)
@@ -0,0 +1,124 @@
+# ===========================================================================
+# https://www.gnu.org/software/autoconf-archive/ax_check_enable_debug.html
+# ===========================================================================
+#
+# SYNOPSIS
+#
+# AX_CHECK_ENABLE_DEBUG([enable by default=yes/info/profile/no], [ENABLE DEBUG VARIABLES ...], [DISABLE DEBUG VARIABLES NDEBUG ...], [IS-RELEASE])
+#
+# DESCRIPTION
+#
+# Check for the presence of an --enable-debug option to configure, with
+# the specified default value used when the option is not present. Return
+# the value in the variable $ax_enable_debug.
+#
+# Specifying 'yes' adds '-g -O0' to the compilation flags for all
+# languages. Specifying 'info' adds '-g' to the compilation flags.
+# Specifying 'profile' adds '-g -pg' to the compilation flags and '-pg' to
+# the linking flags. Otherwise, nothing is added.
+#
+# Define the variables listed in the second argument if debug is enabled,
+# defaulting to no variables. Defines the variables listed in the third
+# argument if debug is disabled, defaulting to NDEBUG. All lists of
+# variables should be space-separated.
+#
+# If debug is not enabled, ensure AC_PROG_* will not add debugging flags.
+# Should be invoked prior to any AC_PROG_* compiler checks.
+#
+# IS-RELEASE can be used to change the default to 'no' when making a
+# release. Set IS-RELEASE to 'yes' or 'no' as appropriate. By default, it
+# uses the value of $ax_is_release, so if you are using the AX_IS_RELEASE
+# macro, there is no need to pass this parameter.
+#
+# AX_IS_RELEASE([git-directory])
+# AX_CHECK_ENABLE_DEBUG()
+#
+# LICENSE
+#
+# Copyright (c) 2011 Rhys Ulerich <rhys.ulerich at gmail.com>
+# Copyright (c) 2014, 2015 Philip Withnall <philip at tecnocode.co.uk>
+#
+# Copying and distribution of this file, with or without modification, are
+# permitted in any medium without royalty provided the copyright notice
+# and this notice are preserved.
+
+#serial 8
+
+AC_DEFUN([AX_CHECK_ENABLE_DEBUG],[
+ AC_BEFORE([$0],[AC_PROG_CC])dnl
+ AC_BEFORE([$0],[AC_PROG_CXX])dnl
+ AC_BEFORE([$0],[AC_PROG_F77])dnl
+ AC_BEFORE([$0],[AC_PROG_FC])dnl
+
+ AC_MSG_CHECKING(whether to enable debugging)
+
+ ax_enable_debug_default=m4_tolower(m4_normalize(ifelse([$1],,[no],[$1])))
+ ax_enable_debug_is_release=m4_tolower(m4_normalize(ifelse([$4],,
+ [$ax_is_release],
+ [$4])))
+
+ # If this is a release, override the default.
+ AS_IF([test "$ax_enable_debug_is_release" = "yes"],
+ [ax_enable_debug_default="no"])
+
+ m4_define(ax_enable_debug_vars,[m4_normalize(ifelse([$2],,,[$2]))])
+ m4_define(ax_disable_debug_vars,[m4_normalize(ifelse([$3],,[NDEBUG],[$3]))])
+
+ AC_ARG_ENABLE(debug,
+ [AS_HELP_STRING([--enable-debug=]@<:@yes/info/profile/no@:>@,[compile with debugging])],
+ [],enable_debug=$ax_enable_debug_default)
+
+ # empty mean debug yes
+ AS_IF([test "x$enable_debug" = "x"],
+ [enable_debug="yes"])
+
+ # case of debug
+ AS_CASE([$enable_debug],
+ [yes],[
+ AC_MSG_RESULT(yes)
+ CFLAGS="${CFLAGS} -g -O0"
+ CXXFLAGS="${CXXFLAGS} -g -O0"
+ FFLAGS="${FFLAGS} -g -O0"
+ FCFLAGS="${FCFLAGS} -g -O0"
+ OBJCFLAGS="${OBJCFLAGS} -g -O0"
+ ],
+ [info],[
+ AC_MSG_RESULT(info)
+ CFLAGS="${CFLAGS} -g"
+ CXXFLAGS="${CXXFLAGS} -g"
+ FFLAGS="${FFLAGS} -g"
+ FCFLAGS="${FCFLAGS} -g"
+ OBJCFLAGS="${OBJCFLAGS} -g"
+ ],
+ [profile],[
+ AC_MSG_RESULT(profile)
+ CFLAGS="${CFLAGS} -g -pg"
+ CXXFLAGS="${CXXFLAGS} -g -pg"
+ FFLAGS="${FFLAGS} -g -pg"
+ FCFLAGS="${FCFLAGS} -g -pg"
+ OBJCFLAGS="${OBJCFLAGS} -g -pg"
+ LDFLAGS="${LDFLAGS} -pg"
+ ],
+ [
+ AC_MSG_RESULT(no)
+ dnl Ensure AC_PROG_CC/CXX/F77/FC/OBJC will not enable debug flags
+ dnl by setting any unset environment flag variables
+ AS_IF([test "x${CFLAGS+set}" != "xset"],
+ [CFLAGS=""])
+ AS_IF([test "x${CXXFLAGS+set}" != "xset"],
+ [CXXFLAGS=""])
+ AS_IF([test "x${FFLAGS+set}" != "xset"],
+ [FFLAGS=""])
+ AS_IF([test "x${FCFLAGS+set}" != "xset"],
+ [FCFLAGS=""])
+ AS_IF([test "x${OBJCFLAGS+set}" != "xset"],
+ [OBJCFLAGS=""])
+ ])
+
+ dnl Define various variables if debugging is disabled.
+ dnl assert.h is a NOP if NDEBUG is defined, so define it by default.
+ AS_IF([test "x$enable_debug" = "xyes"],
+ [m4_map_args_w(ax_enable_debug_vars, [AC_DEFINE(], [,,[Define if debugging is enabled])])],
+ [m4_map_args_w(ax_disable_debug_vars, [AC_DEFINE(], [,,[Define if debugging is disabled])])])
+ ax_enable_debug=$enable_debug
+])
Added: trunk/Build/source/libs/zziplib/zziplib-src/m4/ax_enable_builddir_uname.m4
===================================================================
--- trunk/Build/source/libs/zziplib/zziplib-src/m4/ax_enable_builddir_uname.m4 (rev 0)
+++ trunk/Build/source/libs/zziplib/zziplib-src/m4/ax_enable_builddir_uname.m4 2018-03-18 00:25:18 UTC (rev 47004)
@@ -0,0 +1,164 @@
+dnl /usr/share/aclocal/guidod-cvs/ax_enable_builddir_uname.m4
+dnl @synopsis AX_ENABLE_BUILDDIR_UNAME [(dirstring-or-command [,Makefile.mk])]
+dnl
+dnl if the current configure was run within the srcdir then we move all
+dnl configure-files into a subdir and let the configure steps continue
+dnl there. We provide an option --disable-builddir to suppress the move
+dnl into a separate builddir.
+dnl
+dnl Defaults:
+dnl
+dnl $1 = $build (defaults to `uname -msr`.d)
+dnl $2 = Makefile.mk
+dnl $3 = -all
+dnl
+dnl This macro must be called before AM_INIT_AUTOMAKE.
+dnl
+dnl it creates a default toplevel srcdir Makefile from the information
+dnl found in the created toplevel builddir Makefile. It just copies the
+dnl variables and rule-targets, each extended with a default
+dnl rule-execution that recurses into the build directory of the
+dnl current "BUILD". You can override the auto-dection through
+dnl `uname -msr | tr " /" "__"`.d at build-time of course, as in
+dnl
+dnl make BUILD=i386-mingw-cross
+dnl
+dnl After the default has been created, additional rules can be
+dnl appended that will not just recurse into the subdirectories and
+dnl only ever exist in the srcdir toplevel makefile - these parts are
+dnl read from the $2 = Makefile.mk file
+dnl
+dnl The automatic rules are usually scanning the toplevel Makefile for
+dnl lines like '#### $build |$builddir' to recognize the place where to
+dnl recurse into. Usually, the last one is the only one used. However,
+dnl almost all targets have an additional "*-all" rule which makes the
+dnl script to recurse into _all_ variants of the current BUILD (!!)
+dnl setting. The "-all" suffix can be overridden for the macro as well.
+dnl
+dnl a special rule is only given for things like "dist" that will copy
+dnl the tarball from the builddir to the sourcedir (or $(PUB)) for
+dnl reason of convenience.
+dnl
+dnl @category Misc
+dnl @author Guido U. Draheim
+dnl @version 2005-12-03
+dnl @license GPLWithACException
+
+AC_DEFUN([AX_ENABLE_BUILDDIR_UNAME],[
+AC_REQUIRE([AC_CANONICAL_HOST])[]dnl
+AC_REQUIRE([AX_CONFIGURE_ARGS])[]dnl
+AC_BEFORE([$0],[AM_INIT_AUTOMAKE])dnl
+AS_VAR_PUSHDEF([SUB],[ax_enable_builddir])dnl
+AS_VAR_PUSHDEF([SED],[ax_enable_builddir_sed])dnl
+SUB="."
+AC_ARG_ENABLE([builddir], AC_HELP_STRING(
+ [--disable-builddir],[disable automatic build in subdir of sources])
+ ,[SUB="$enableval"], [SUB="yes"])
+if test ".$ac_srcdir_defaulted" != ".no" ; then
+if test ".$srcdir" = ".." ; then
+ if test -f config.status ; then
+ AC_MSG_NOTICE(toplevel srcdir already configured... skipping subdir build)
+ else
+ test ".$SUB" = "." && SUB="."
+ test ".$SUB" = ".no" && SUB="."
+ test ".$BUILD" = "." && BUILD=`uname -msr | tr " /" "__"`.d
+ test ".$SUB" = ".yes" && SUB="m4_ifval([$1], [$1],[$BUILD])"
+ if test ".$SUB" != ".." ; then # we know where to go and
+ AS_MKDIR_P([$SUB])
+ echo __.$SUB.__ > $SUB/conftest.tmp
+ cd $SUB
+ if grep __.$SUB.__ conftest.tmp >/dev/null 2>/dev/null ; then
+ rm conftest.tmp
+ AC_MSG_RESULT([continue configure in default builddir "./$SUB"])
+ else
+ AC_MSG_ERROR([could not change to default builddir "./$SUB"])
+ fi
+ srcdir=`echo "$SUB" |
+ sed -e 's,^\./,,;s,[[^/]]$,&/,;s,[[^/]]*/,../,g;s,[[/]]$,,;'`
+ # going to restart from subdirectory location
+ test -f $srcdir/config.log && mv $srcdir/config.log .
+ test -f $srcdir/confdefs.h && mv $srcdir/confdefs.h .
+ test -f $srcdir/conftest.log && mv $srcdir/conftest.log .
+ test -f $srcdir/$cache_file && mv $srcdir/$cache_file .
+ AC_MSG_RESULT(....exec $SHELL "$srcdir/[$]0" "--srcdir=$srcdir" "--enable-builddir=$SUB" $ac_configure_args)
+ case "[$]0" in # restart
+ [/\\]*) eval $SHELL "'[$]0'" "'--srcdir=$srcdir'" "'--enable-builddir=$SUB'" $ac_configure_args ;;
+ *) eval $SHELL "'$srcdir/[$]0'" "'--srcdir=$srcdir'" "'--enable-builddir=$SUB'" $ac_configure_args ;;
+ esac ; exit $?
+ fi
+ fi
+fi fi
+dnl ac_path_prog uses "set dummy" to override $@ which would defeat the "exec"
+AC_PATH_PROG(SED,gsed sed, sed)
+AS_VAR_POPDEF([SED])dnl
+AS_VAR_POPDEF([SUB])dnl
+AC_CONFIG_COMMANDS([buildir],[dnl .............. config.status ..............
+AS_VAR_PUSHDEF([SUB],[ax_enable_builddir])dnl
+AS_VAR_PUSHDEF([TOP],[top_srcdir])dnl
+AS_VAR_PUSHDEF([SRC],[ac_top_srcdir])dnl
+AS_VAR_PUSHDEF([SED],[ax_enable_builddir_sed])dnl
+pushdef([END],[Makefile.mk])dnl
+ SRC="$ax_enable_builddir_srcdir"
+ if test ".$SUB" = "." ; then
+ if test -f "$TOP/Makefile" ; then
+ AC_MSG_NOTICE([skipping TOP/Makefile - left untouched])
+ else
+ AC_MSG_NOTICE([skipping TOP/Makefile - not created])
+ fi
+ else
+ AC_MSG_NOTICE([create TOP/Makefile guessed from local Makefile])
+ x='`' ; cat >$tmp/conftemp.sed <<_EOF
+/^\$/n
+x
+/^\$/bS
+x
+/\\\\\$/{H;d;}
+{H;s/.*//;x;}
+bM
+:S
+x
+/\\\\\$/{h;d;}
+{h;s/.*//;x;}
+:M
+s/\\(\\n\\) /\\1 /g
+/^ /d
+/^[[ ]]*[[\\#]]/d
+/^VPATH *=/d
+s/^srcdir *=.*/srcdir = ./
+s/^top_srcdir *=.*/top_srcdir = ./
+/[[:=]]/!d
+/^\\./d
+s/:.*/:/
+/:\$/s/ / /g
+/:\$/s/ / /g
+/^.*[[=]]/!s%\$% ; (cd \$(BUILD) \\&\\& \$(ISNOTSRCDIR) \\&\\& \$(MAKE) "\$\@") || exit ; \$(MAKE) done "RULE=\$\@"%
+_EOF
+ test ".$USE_MAINTAINER_MODE" = ".no" || \
+ cp "$tmp/conftemp.sed" "$SRC/makefile.sed~" ## DEBUGGING
+ echo 'BUILD=`uname -msr | tr " /" "__"`.d' >$SRC/Makefile
+ echo 'ISNOTSRCDIR=test ! -f configure' >>$SRC/Makefile
+ $SED -f $tmp/conftemp.sed Makefile >>$SRC/Makefile
+ echo 'done: ;@ if grep "$(RULE)-done .*:" Makefile > /dev/null; then dnl
+ echo $(MAKE) $(RULE)-done ; $(MAKE) $(RULE)-done ; else true ; fi' dnl
+ >> $SRC/Makefile
+ if test -f "$SRC/m4_ifval([$2],[$2],[END])" ; then
+ AC_MSG_NOTICE([extend TOP/Makefile with TOP/m4_ifval([$2],[$2],[END])])
+ cat $SRC/END >>$SRC/Makefile
+ fi
+ AC_MSG_NOTICE([make uses BUILD=$SUB (on $ax_enable_builddir_host:)])
+ fi
+popdef([END])dnl
+AS_VAR_POPDEF([SED])dnl
+AS_VAR_POPDEF([SRC])dnl
+AS_VAR_POPDEF([TOP])dnl
+AS_VAR_POPDEF([SUB])dnl
+],[dnl
+ax_enable_builddir_srcdir="$srcdir" # $srcdir
+ax_enable_builddir_host="$HOST" # $HOST / $host
+ax_enable_builddir_version="$VERSION" # $VERSION
+ax_enable_builddir_package="$PACKAGE" # $PACKAGE
+ax_enable_builddir_sed="$ax_enable_builddir_sed" # $SED
+ax_enable_builddir="$ax_enable_builddir" # $SUB
+])dnl
+])
+
Modified: trunk/Build/source/libs/zziplib/zziplib-src/m4/ax_not_enable_frame_pointer.m4
===================================================================
--- trunk/Build/source/libs/zziplib/zziplib-src/m4/ax_not_enable_frame_pointer.m4 2018-03-17 22:23:43 UTC (rev 47003)
+++ trunk/Build/source/libs/zziplib/zziplib-src/m4/ax_not_enable_frame_pointer.m4 2018-03-18 00:25:18 UTC (rev 47004)
@@ -8,7 +8,7 @@
dnl
dnl @category C
dnl @author Guido U. Draheim <guidod at gmx.de>
-dnl @version 2005-01-22
+dnl @version 2018-02-22
dnl @license GPLWithACException
AC_DEFUN([AX_NOT_ENABLE_FRAME_POINTER],[dnl
@@ -16,6 +16,10 @@
AC_MSG_CHECKING([m4_ifval($1,$1,CFLAGS) frame-pointer])
AC_ARG_ENABLE([frame-pointer], AC_HELP_STRING(
[--enable-frame-pointer],[enable callframe generation for debugging]))
+if test ".$VAR" = "."; then
+ case ".$enable_debug" in .|.no|.no,*) : ;; *) VAR="$enable_debug" ;; esac
+ case ".$with_debug" in .|.no|.no,*) : ;; *) VAR="$with_debug" ;; esac
+fi
case ".$VAR" in
.|.no|.no,*) test ".$VAR" = "." && VAR="no"
m4_ifval($1,$1,CFLAGS)=`echo dnl
Modified: trunk/Build/source/libs/zziplib/zziplib-src/m4/libtool.m4
===================================================================
--- trunk/Build/source/libs/zziplib/zziplib-src/m4/libtool.m4 2018-03-17 22:23:43 UTC (rev 47003)
+++ trunk/Build/source/libs/zziplib/zziplib-src/m4/libtool.m4 2018-03-18 00:25:18 UTC (rev 47004)
@@ -1,7 +1,6 @@
# libtool.m4 - Configure libtool for the host system. -*-Autoconf-*-
#
-# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005,
-# 2006, 2007, 2008 Free Software Foundation, Inc.
+# Copyright (C) 1996-2001, 2003-2015 Free Software Foundation, Inc.
# Written by Gordon Matzigkeit, 1996
#
# This file is free software; the Free Software Foundation gives
@@ -9,35 +8,30 @@
# modifications, as long as this notice is preserved.
m4_define([_LT_COPYING], [dnl
-# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005,
-# 2006, 2007, 2008 Free Software Foundation, Inc.
-# Written by Gordon Matzigkeit, 1996
+# Copyright (C) 2014 Free Software Foundation, Inc.
+# This is free software; see the source for copying conditions. There is NO
+# warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+
+# GNU Libtool is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of of the License, or
+# (at your option) any later version.
#
-# This file is part of GNU Libtool.
+# As a special exception to the GNU General Public License, if you
+# distribute this file as part of a program or library that is built
+# using GNU Libtool, you may include this file under the same
+# distribution terms that you use for the rest of that program.
#
-# GNU Libtool is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# As a special exception to the GNU General Public License,
-# if you distribute this file as part of a program or library that
-# is built using GNU Libtool, you may include this file under the
-# same distribution terms that you use for the rest of that program.
-#
-# GNU Libtool is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# GNU Libtool is distributed in the hope that it will be useful, but
+# WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
-# along with GNU Libtool; see the file COPYING. If not, a copy
-# can be downloaded from http://www.gnu.org/licenses/gpl.html, or
-# obtained by writing to the Free Software Foundation, Inc.,
-# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+# along with this program. If not, see <http://www.gnu.org/licenses/>.
])
-# serial 56 LT_INIT
+# serial 58 LT_INIT
# LT_PREREQ(VERSION)
@@ -65,7 +59,8 @@
# LT_INIT([OPTIONS])
# ------------------
AC_DEFUN([LT_INIT],
-[AC_PREREQ([2.58])dnl We use AC_INCLUDES_DEFAULT
+[AC_PREREQ([2.62])dnl We use AC_PATH_PROGS_FEATURE_CHECK
+AC_REQUIRE([AC_CONFIG_AUX_DIR_DEFAULT])dnl
AC_BEFORE([$0], [LT_LANG])dnl
AC_BEFORE([$0], [LT_OUTPUT])dnl
AC_BEFORE([$0], [LTDL_INIT])dnl
@@ -82,11 +77,13 @@
AC_REQUIRE([LTOBSOLETE_VERSION])dnl
m4_require([_LT_PROG_LTMAIN])dnl
+_LT_SHELL_INIT([SHELL=${CONFIG_SHELL-/bin/sh}])
+
dnl Parse OPTIONS
_LT_SET_OPTIONS([$0], [$1])
# This can be used to rebuild libtool when needed
-LIBTOOL_DEPS="$ltmain"
+LIBTOOL_DEPS=$ltmain
# Always use our own libtool.
LIBTOOL='$(SHELL) $(top_builddir)/libtool'
@@ -106,19 +103,36 @@
dnl AC_DEFUN([AM_PROG_LIBTOOL], [])
+# _LT_PREPARE_CC_BASENAME
+# -----------------------
+m4_defun([_LT_PREPARE_CC_BASENAME], [
+# Calculate cc_basename. Skip known compiler wrappers and cross-prefix.
+func_cc_basename ()
+{
+ for cc_temp in @S|@*""; do
+ case $cc_temp in
+ compile | *[[\\/]]compile | ccache | *[[\\/]]ccache ) ;;
+ distcc | *[[\\/]]distcc | purify | *[[\\/]]purify ) ;;
+ \-*) ;;
+ *) break;;
+ esac
+ done
+ func_cc_basename_result=`$ECHO "$cc_temp" | $SED "s%.*/%%; s%^$host_alias-%%"`
+}
+])# _LT_PREPARE_CC_BASENAME
+
+
# _LT_CC_BASENAME(CC)
# -------------------
-# Calculate cc_basename. Skip known compiler wrappers and cross-prefix.
+# It would be clearer to call AC_REQUIREs from _LT_PREPARE_CC_BASENAME,
+# but that macro is also expanded into generated libtool script, which
+# arranges for $SED and $ECHO to be set by different means.
m4_defun([_LT_CC_BASENAME],
-[for cc_temp in $1""; do
- case $cc_temp in
- compile | *[[\\/]]compile | ccache | *[[\\/]]ccache ) ;;
- distcc | *[[\\/]]distcc | purify | *[[\\/]]purify ) ;;
- \-*) ;;
- *) break;;
- esac
-done
-cc_basename=`$ECHO "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"`
+[m4_require([_LT_PREPARE_CC_BASENAME])dnl
+AC_REQUIRE([_LT_DECL_SED])dnl
+AC_REQUIRE([_LT_PROG_ECHO_BACKSLASH])dnl
+func_cc_basename $1
+cc_basename=$func_cc_basename_result
])
@@ -125,7 +139,7 @@
# _LT_FILEUTILS_DEFAULTS
# ----------------------
# It is okay to use these file commands and assume they have been set
-# sensibly after `m4_require([_LT_FILEUTILS_DEFAULTS])'.
+# sensibly after 'm4_require([_LT_FILEUTILS_DEFAULTS])'.
m4_defun([_LT_FILEUTILS_DEFAULTS],
[: ${CP="cp -f"}
: ${MV="mv -f"}
@@ -138,6 +152,11 @@
m4_defun([_LT_SETUP],
[AC_REQUIRE([AC_CANONICAL_HOST])dnl
AC_REQUIRE([AC_CANONICAL_BUILD])dnl
+AC_REQUIRE([_LT_PREPARE_SED_QUOTE_VARS])dnl
+AC_REQUIRE([_LT_PROG_ECHO_BACKSLASH])dnl
+
+_LT_DECL([], [PATH_SEPARATOR], [1], [The PATH separator for the build system])dnl
+dnl
_LT_DECL([], [host_alias], [0], [The host system])dnl
_LT_DECL([], [host], [0])dnl
_LT_DECL([], [host_os], [0])dnl
@@ -160,19 +179,23 @@
dnl
m4_require([_LT_FILEUTILS_DEFAULTS])dnl
m4_require([_LT_CHECK_SHELL_FEATURES])dnl
+m4_require([_LT_PATH_CONVERSION_FUNCTIONS])dnl
m4_require([_LT_CMD_RELOAD])dnl
m4_require([_LT_CHECK_MAGIC_METHOD])dnl
+m4_require([_LT_CHECK_SHAREDLIB_FROM_LINKLIB])dnl
m4_require([_LT_CMD_OLD_ARCHIVE])dnl
m4_require([_LT_CMD_GLOBAL_SYMBOLS])dnl
+m4_require([_LT_WITH_SYSROOT])dnl
+m4_require([_LT_CMD_TRUNCATE])dnl
_LT_CONFIG_LIBTOOL_INIT([
-# See if we are running on zsh, and set the options which allow our
+# See if we are running on zsh, and set the options that allow our
# commands through without removal of \ escapes INIT.
-if test -n "\${ZSH_VERSION+set}" ; then
+if test -n "\${ZSH_VERSION+set}"; then
setopt NO_GLOB_SUBST
fi
])
-if test -n "${ZSH_VERSION+set}" ; then
+if test -n "${ZSH_VERSION+set}"; then
setopt NO_GLOB_SUBST
fi
@@ -179,7 +202,6 @@
_LT_CHECK_OBJDIR
m4_require([_LT_TAG_COMPILER])dnl
-_LT_PROG_ECHO_BACKSLASH
case $host_os in
aix3*)
@@ -186,7 +208,7 @@
# AIX sometimes has problems with the GCC collect2 program. For some
# reason, if we set the COLLECT_NAMES environment variable, the problems
# vanish in a puff of smoke.
- if test "X${COLLECT_NAMES+set}" != Xset; then
+ if test set != "${COLLECT_NAMES+set}"; then
COLLECT_NAMES=
export COLLECT_NAMES
fi
@@ -193,35 +215,18 @@
;;
esac
-# Sed substitution that helps us do robust quoting. It backslashifies
-# metacharacters that are still active within double-quoted strings.
-sed_quote_subst='s/\([["`$\\]]\)/\\\1/g'
-
-# Same as above, but do not quote variable references.
-double_quote_subst='s/\([["`\\]]\)/\\\1/g'
-
-# Sed substitution to delay expansion of an escaped shell variable in a
-# double_quote_subst'ed string.
-delay_variable_subst='s/\\\\\\\\\\\$/\\\\\\$/g'
-
-# Sed substitution to delay expansion of an escaped single quote.
-delay_single_quote_subst='s/'\''/'\'\\\\\\\'\''/g'
-
-# Sed substitution to avoid accidental globbing in evaled expressions
-no_glob_subst='s/\*/\\\*/g'
-
# Global variables:
ofile=libtool
can_build_shared=yes
-# All known linkers require a `.a' archive for static linking (except MSVC,
+# All known linkers require a '.a' archive for static linking (except MSVC,
# which needs '.lib').
libext=a
-with_gnu_ld="$lt_cv_prog_gnu_ld"
+with_gnu_ld=$lt_cv_prog_gnu_ld
-old_CC="$CC"
-old_CFLAGS="$CFLAGS"
+old_CC=$CC
+old_CFLAGS=$CFLAGS
# Set sane defaults for various variables
test -z "$CC" && CC=cc
@@ -250,16 +255,38 @@
])# _LT_SETUP
+# _LT_PREPARE_SED_QUOTE_VARS
+# --------------------------
+# Define a few sed substitution that help us do robust quoting.
+m4_defun([_LT_PREPARE_SED_QUOTE_VARS],
+[# Backslashify metacharacters that are still active within
+# double-quoted strings.
+sed_quote_subst='s/\([["`$\\]]\)/\\\1/g'
+
+# Same as above, but do not quote variable references.
+double_quote_subst='s/\([["`\\]]\)/\\\1/g'
+
+# Sed substitution to delay expansion of an escaped shell variable in a
+# double_quote_subst'ed string.
+delay_variable_subst='s/\\\\\\\\\\\$/\\\\\\$/g'
+
+# Sed substitution to delay expansion of an escaped single quote.
+delay_single_quote_subst='s/'\''/'\'\\\\\\\'\''/g'
+
+# Sed substitution to avoid accidental globbing in evaled expressions
+no_glob_subst='s/\*/\\\*/g'
+])
+
# _LT_PROG_LTMAIN
# ---------------
-# Note that this code is called both from `configure', and `config.status'
+# Note that this code is called both from 'configure', and 'config.status'
# now that we use AC_CONFIG_COMMANDS to generate libtool. Notably,
-# `config.status' has no value for ac_aux_dir unless we are using Automake,
+# 'config.status' has no value for ac_aux_dir unless we are using Automake,
# so we pass a copy along to make sure it has a sensible value anyway.
m4_defun([_LT_PROG_LTMAIN],
[m4_ifdef([AC_REQUIRE_AUX_FILE], [AC_REQUIRE_AUX_FILE([ltmain.sh])])dnl
_LT_CONFIG_LIBTOOL_INIT([ac_aux_dir='$ac_aux_dir'])
-ltmain="$ac_aux_dir/ltmain.sh"
+ltmain=$ac_aux_dir/ltmain.sh
])# _LT_PROG_LTMAIN
@@ -269,7 +296,7 @@
# So that we can recreate a full libtool script including additional
# tags, we accumulate the chunks of code to send to AC_CONFIG_COMMANDS
-# in macros and then make a single call at the end using the `libtool'
+# in macros and then make a single call at the end using the 'libtool'
# label.
@@ -404,11 +431,11 @@
# _LT_CONFIG_STATUS_DECLARE([VARNAME])
# ------------------------------------
-# Quote a variable value, and forward it to `config.status' so that its
-# declaration there will have the same value as in `configure'. VARNAME
+# Quote a variable value, and forward it to 'config.status' so that its
+# declaration there will have the same value as in 'configure'. VARNAME
# must have a single quote delimited value for this to work.
m4_define([_LT_CONFIG_STATUS_DECLARE],
-[$1='`$ECHO "X$][$1" | $Xsed -e "$delay_single_quote_subst"`'])
+[$1='`$ECHO "$][$1" | $SED "$delay_single_quote_subst"`'])
# _LT_CONFIG_STATUS_DECLARATIONS
@@ -418,7 +445,7 @@
# embedded single quotes properly. In configure, this macro expands
# each variable declared with _LT_DECL (and _LT_TAGDECL) into:
#
-# <var>='`$ECHO "X$<var>" | $Xsed -e "$delay_single_quote_subst"`'
+# <var>='`$ECHO "$<var>" | $SED "$delay_single_quote_subst"`'
m4_defun([_LT_CONFIG_STATUS_DECLARATIONS],
[m4_foreach([_lt_var], m4_quote(lt_decl_all_varnames),
[m4_n([_LT_CONFIG_STATUS_DECLARE(_lt_var)])])])
@@ -429,7 +456,7 @@
# Output comment and list of tags supported by the script
m4_defun([_LT_LIBTOOL_TAGS],
[_LT_FORMAT_COMMENT([The names of the tagged configurations supported by this script])dnl
-available_tags="_LT_TAGS"dnl
+available_tags='_LT_TAGS'dnl
])
@@ -457,7 +484,7 @@
# _LT_LIBTOOL_CONFIG_VARS
# -----------------------
# Produce commented declarations of non-tagged libtool config variables
-# suitable for insertion in the LIBTOOL CONFIG section of the `libtool'
+# suitable for insertion in the LIBTOOL CONFIG section of the 'libtool'
# script. Tagged libtool config variables (even for the LIBTOOL CONFIG
# section) are produced by _LT_LIBTOOL_TAG_VARS.
m4_defun([_LT_LIBTOOL_CONFIG_VARS],
@@ -483,8 +510,8 @@
# Send accumulated output to $CONFIG_STATUS. Thanks to the lists of
# variables for single and double quote escaping we saved from calls
# to _LT_DECL, we can put quote escaped variables declarations
-# into `config.status', and then the shell code to quote escape them in
-# for loops in `config.status'. Finally, any additional code accumulated
+# into 'config.status', and then the shell code to quote escape them in
+# for loops in 'config.status'. Finally, any additional code accumulated
# from calls to _LT_CONFIG_LIBTOOL_INIT is expanded.
m4_defun([_LT_CONFIG_COMMANDS],
[AC_PROVIDE_IFELSE([LT_OUTPUT],
@@ -517,12 +544,20 @@
LTCFLAGS='$LTCFLAGS'
compiler='$compiler_DEFAULT'
+# A function that is used when there is no print builtin or printf.
+func_fallback_echo ()
+{
+ eval 'cat <<_LTECHO_EOF
+\$[]1
+_LTECHO_EOF'
+}
+
# Quote evaled strings.
for var in lt_decl_all_varnames([[ \
]], lt_decl_quote_varnames); do
- case \`eval \\\\\$ECHO "X\\\\\$\$var"\` in
+ case \`eval \\\\\$ECHO \\\\""\\\\\$\$var"\\\\"\` in
*[[\\\\\\\`\\"\\\$]]*)
- eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"X\\\$\$var\\" | \\\$Xsed -e \\"\\\$sed_quote_subst\\"\\\`\\\\\\""
+ eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"\\\$\$var\\" | \\\$SED \\"\\\$sed_quote_subst\\"\\\`\\\\\\"" ## exclude from sc_prohibit_nested_quotes
;;
*)
eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\""
@@ -533,9 +568,9 @@
# Double-quote double-evaled strings.
for var in lt_decl_all_varnames([[ \
]], lt_decl_dquote_varnames); do
- case \`eval \\\\\$ECHO "X\\\\\$\$var"\` in
+ case \`eval \\\\\$ECHO \\\\""\\\\\$\$var"\\\\"\` in
*[[\\\\\\\`\\"\\\$]]*)
- eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"X\\\$\$var\\" | \\\$Xsed -e \\"\\\$double_quote_subst\\" -e \\"\\\$sed_quote_subst\\" -e \\"\\\$delay_variable_subst\\"\\\`\\\\\\""
+ eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"\\\$\$var\\" | \\\$SED -e \\"\\\$double_quote_subst\\" -e \\"\\\$sed_quote_subst\\" -e \\"\\\$delay_variable_subst\\"\\\`\\\\\\"" ## exclude from sc_prohibit_nested_quotes
;;
*)
eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\""
@@ -543,16 +578,38 @@
esac
done
-# Fix-up fallback echo if it was mangled by the above quoting rules.
-case \$lt_ECHO in
-*'\\\[$]0 --fallback-echo"')dnl "
- lt_ECHO=\`\$ECHO "X\$lt_ECHO" | \$Xsed -e 's/\\\\\\\\\\\\\\\[$]0 --fallback-echo"\[$]/\[$]0 --fallback-echo"/'\`
- ;;
-esac
-
_LT_OUTPUT_LIBTOOL_INIT
])
+# _LT_GENERATED_FILE_INIT(FILE, [COMMENT])
+# ------------------------------------
+# Generate a child script FILE with all initialization necessary to
+# reuse the environment learned by the parent script, and make the
+# file executable. If COMMENT is supplied, it is inserted after the
+# '#!' sequence but before initialization text begins. After this
+# macro, additional text can be appended to FILE to form the body of
+# the child script. The macro ends with non-zero status if the
+# file could not be fully written (such as if the disk is full).
+m4_ifdef([AS_INIT_GENERATED],
+[m4_defun([_LT_GENERATED_FILE_INIT],[AS_INIT_GENERATED($@)])],
+[m4_defun([_LT_GENERATED_FILE_INIT],
+[m4_require([AS_PREPARE])]dnl
+[m4_pushdef([AS_MESSAGE_LOG_FD])]dnl
+[lt_write_fail=0
+cat >$1 <<_ASEOF || lt_write_fail=1
+#! $SHELL
+# Generated by $as_me.
+$2
+SHELL=\${CONFIG_SHELL-$SHELL}
+export SHELL
+_ASEOF
+cat >>$1 <<\_ASEOF || lt_write_fail=1
+AS_SHELL_SANITIZE
+_AS_PREPARE
+exec AS_MESSAGE_FD>&1
+_ASEOF
+test 0 = "$lt_write_fail" && chmod +x $1[]dnl
+m4_popdef([AS_MESSAGE_LOG_FD])])])# _LT_GENERATED_FILE_INIT
# LT_OUTPUT
# ---------
@@ -562,20 +619,11 @@
AC_DEFUN([LT_OUTPUT],
[: ${CONFIG_LT=./config.lt}
AC_MSG_NOTICE([creating $CONFIG_LT])
-cat >"$CONFIG_LT" <<_LTEOF
-#! $SHELL
-# Generated by $as_me.
-# Run this file to recreate a libtool stub with the current configuration.
+_LT_GENERATED_FILE_INIT(["$CONFIG_LT"],
+[# Run this file to recreate a libtool stub with the current configuration.])
+cat >>"$CONFIG_LT" <<\_LTEOF
lt_cl_silent=false
-SHELL=\${CONFIG_SHELL-$SHELL}
-_LTEOF
-
-cat >>"$CONFIG_LT" <<\_LTEOF
-AS_SHELL_SANITIZE
-_AS_PREPARE
-
-exec AS_MESSAGE_FD>&1
exec AS_MESSAGE_LOG_FD>>config.log
{
echo
@@ -583,7 +631,7 @@
} >&AS_MESSAGE_LOG_FD
lt_cl_help="\
-\`$as_me' creates a local libtool stub from the current configuration,
+'$as_me' creates a local libtool stub from the current configuration,
for use in further configure time tests before the real libtool is
generated.
@@ -601,11 +649,11 @@
m4_ifset([AC_PACKAGE_VERSION], [ AC_PACKAGE_VERSION])
configured by $[0], generated by m4_PACKAGE_STRING.
-Copyright (C) 2008 Free Software Foundation, Inc.
+Copyright (C) 2011 Free Software Foundation, Inc.
This config.lt script is free software; the Free Software Foundation
-gives unlimited permission to copy, distribute and modify it."
+gives unlimited permision to copy, distribute and modify it."
-while test $[#] != 0
+while test 0 != $[#]
do
case $[1] in
--version | --v* | -V )
@@ -618,10 +666,10 @@
lt_cl_silent=: ;;
-*) AC_MSG_ERROR([unrecognized option: $[1]
-Try \`$[0] --help' for more information.]) ;;
+Try '$[0] --help' for more information.]) ;;
*) AC_MSG_ERROR([unrecognized argument: $[1]
-Try \`$[0] --help' for more information.]) ;;
+Try '$[0] --help' for more information.]) ;;
esac
shift
done
@@ -646,15 +694,13 @@
# appending to config.log, which fails on DOS, as config.log is still kept
# open by configure. Here we exec the FD to /dev/null, effectively closing
# config.log, so it can be properly (re)opened and appended to by config.lt.
-if test "$no_create" != yes; then
- lt_cl_success=:
- test "$silent" = yes &&
- lt_config_lt_args="$lt_config_lt_args --quiet"
- exec AS_MESSAGE_LOG_FD>/dev/null
- $SHELL "$CONFIG_LT" $lt_config_lt_args || lt_cl_success=false
- exec AS_MESSAGE_LOG_FD>>config.log
- $lt_cl_success || AS_EXIT(1)
-fi
+lt_cl_success=:
+test yes = "$silent" &&
+ lt_config_lt_args="$lt_config_lt_args --quiet"
+exec AS_MESSAGE_LOG_FD>/dev/null
+$SHELL "$CONFIG_LT" $lt_config_lt_args || lt_cl_success=false
+exec AS_MESSAGE_LOG_FD>>config.log
+$lt_cl_success || AS_EXIT(1)
])# LT_OUTPUT
@@ -669,27 +715,30 @@
_LT_CONFIG_SAVE_COMMANDS([
m4_define([_LT_TAG], m4_if([$1], [], [C], [$1]))dnl
m4_if(_LT_TAG, [C], [
- # See if we are running on zsh, and set the options which allow our
+ # See if we are running on zsh, and set the options that allow our
# commands through without removal of \ escapes.
- if test -n "${ZSH_VERSION+set}" ; then
+ if test -n "${ZSH_VERSION+set}"; then
setopt NO_GLOB_SUBST
fi
- cfgfile="${ofile}T"
+ cfgfile=${ofile}T
trap "$RM \"$cfgfile\"; exit 1" 1 2 15
$RM "$cfgfile"
cat <<_LT_EOF >> "$cfgfile"
#! $SHELL
+# Generated automatically by $as_me ($PACKAGE) $VERSION
+# NOTE: Changes made to this file will be lost: look at ltmain.sh.
-# `$ECHO "$ofile" | sed 's%^.*/%%'` - Provide generalized library-building support services.
-# Generated automatically by $as_me ($PACKAGE$TIMESTAMP) $VERSION
-# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`:
-# NOTE: Changes made to this file will be lost: look at ltmain.sh.
-#
+# Provide generalized library-building support services.
+# Written by Gordon Matzigkeit, 1996
+
_LT_COPYING
_LT_LIBTOOL_TAGS
+# Configured defaults for sys_lib_dlsearch_path munging.
+: \${LT_SYS_LIBRARY_PATH="$configure_time_lt_sys_library_path"}
+
# ### BEGIN LIBTOOL CONFIG
_LT_LIBTOOL_CONFIG_VARS
_LT_LIBTOOL_TAG_VARS
@@ -697,6 +746,17 @@
_LT_EOF
+ cat <<'_LT_EOF' >> "$cfgfile"
+
+# ### BEGIN FUNCTIONS SHARED WITH CONFIGURE
+
+_LT_PREPARE_MUNGE_PATH_LIST
+_LT_PREPARE_CC_BASENAME
+
+# ### END FUNCTIONS SHARED WITH CONFIGURE
+
+_LT_EOF
+
case $host_os in
aix3*)
cat <<\_LT_EOF >> "$cfgfile"
@@ -703,7 +763,7 @@
# AIX sometimes has problems with the GCC collect2 program. For some
# reason, if we set the COLLECT_NAMES environment variable, the problems
# vanish in a puff of smoke.
-if test "X${COLLECT_NAMES+set}" != Xset; then
+if test set != "${COLLECT_NAMES+set}"; then
COLLECT_NAMES=
export COLLECT_NAMES
fi
@@ -717,15 +777,10 @@
# if finds mixed CR/LF and LF-only lines. Since sed operates in
# text mode, it properly converts lines to CR/LF. This bash problem
# is reportedly fixed, but why not run on old versions too?
- sed '/^# Generated shell functions inserted here/q' "$ltmain" >> "$cfgfile" \
- || (rm -f "$cfgfile"; exit 1)
+ sed '$q' "$ltmain" >> "$cfgfile" \
+ || (rm -f "$cfgfile"; exit 1)
- _LT_PROG_XSI_SHELLFNS
-
- sed -n '/^# Generated shell functions inserted here/,$p' "$ltmain" >> "$cfgfile" \
- || (rm -f "$cfgfile"; exit 1)
-
- mv -f "$cfgfile" "$ofile" ||
+ mv -f "$cfgfile" "$ofile" ||
(rm -f "$ofile" && cp "$cfgfile" "$ofile" && rm -f "$cfgfile")
chmod +x "$ofile"
],
@@ -742,7 +797,6 @@
[m4_if([$1], [], [
PACKAGE='$PACKAGE'
VERSION='$VERSION'
- TIMESTAMP='$TIMESTAMP'
RM='$RM'
ofile='$ofile'], [])
])dnl /_LT_CONFIG_SAVE_COMMANDS
@@ -770,6 +824,7 @@
m4_case([$1],
[C], [_LT_LANG(C)],
[C++], [_LT_LANG(CXX)],
+ [Go], [_LT_LANG(GO)],
[Java], [_LT_LANG(GCJ)],
[Fortran 77], [_LT_LANG(F77)],
[Fortran], [_LT_LANG(FC)],
@@ -791,6 +846,31 @@
])# _LT_LANG
+m4_ifndef([AC_PROG_GO], [
+############################################################
+# NOTE: This macro has been submitted for inclusion into #
+# GNU Autoconf as AC_PROG_GO. When it is available in #
+# a released version of Autoconf we should remove this #
+# macro and use it instead. #
+############################################################
+m4_defun([AC_PROG_GO],
+[AC_LANG_PUSH(Go)dnl
+AC_ARG_VAR([GOC], [Go compiler command])dnl
+AC_ARG_VAR([GOFLAGS], [Go compiler flags])dnl
+_AC_ARG_VAR_LDFLAGS()dnl
+AC_CHECK_TOOL(GOC, gccgo)
+if test -z "$GOC"; then
+ if test -n "$ac_tool_prefix"; then
+ AC_CHECK_PROG(GOC, [${ac_tool_prefix}gccgo], [${ac_tool_prefix}gccgo])
+ fi
+fi
+if test -z "$GOC"; then
+ AC_CHECK_PROG(GOC, gccgo, gccgo, false)
+fi
+])#m4_defun
+])#m4_ifndef
+
+
# _LT_LANG_DEFAULT_CONFIG
# -----------------------
m4_defun([_LT_LANG_DEFAULT_CONFIG],
@@ -821,6 +901,10 @@
m4_ifdef([LT_PROG_GCJ],
[m4_define([LT_PROG_GCJ], defn([LT_PROG_GCJ])[LT_LANG(GCJ)])])])])])
+AC_PROVIDE_IFELSE([AC_PROG_GO],
+ [LT_LANG(GO)],
+ [m4_define([AC_PROG_GO], defn([AC_PROG_GO])[LT_LANG(GO)])])
+
AC_PROVIDE_IFELSE([LT_PROG_RC],
[LT_LANG(RC)],
[m4_define([LT_PROG_RC], defn([LT_PROG_RC])[LT_LANG(RC)])])
@@ -831,11 +915,13 @@
AU_DEFUN([AC_LIBTOOL_F77], [LT_LANG(Fortran 77)])
AU_DEFUN([AC_LIBTOOL_FC], [LT_LANG(Fortran)])
AU_DEFUN([AC_LIBTOOL_GCJ], [LT_LANG(Java)])
+AU_DEFUN([AC_LIBTOOL_RC], [LT_LANG(Windows Resource)])
dnl aclocal-1.4 backwards compatibility:
dnl AC_DEFUN([AC_LIBTOOL_CXX], [])
dnl AC_DEFUN([AC_LIBTOOL_F77], [])
dnl AC_DEFUN([AC_LIBTOOL_FC], [])
dnl AC_DEFUN([AC_LIBTOOL_GCJ], [])
+dnl AC_DEFUN([AC_LIBTOOL_RC], [])
# _LT_TAG_COMPILER
@@ -909,7 +995,7 @@
AC_CACHE_CHECK([for -single_module linker flag],[lt_cv_apple_cc_single_mod],
[lt_cv_apple_cc_single_mod=no
- if test -z "${LT_MULTI_MODULE}"; then
+ if test -z "$LT_MULTI_MODULE"; then
# By default we will add the -single_module flag. You can override
# by either setting the environment variable LT_MULTI_MODULE
# non-empty at configure time, or by adding -multi_module to the
@@ -921,7 +1007,13 @@
$LTCC $LTCFLAGS $LDFLAGS -o libconftest.dylib \
-dynamiclib -Wl,-single_module conftest.c 2>conftest.err
_lt_result=$?
- if test -f libconftest.dylib && test ! -s conftest.err && test $_lt_result = 0; then
+ # If there is a non-empty error log, and "single_module"
+ # appears in it, assume the flag caused a linker warning
+ if test -s conftest.err && $GREP single_module conftest.err; then
+ cat conftest.err >&AS_MESSAGE_LOG_FD
+ # Otherwise, if the output was created with a 0 exit code from
+ # the compiler, it worked.
+ elif test -f libconftest.dylib && test 0 = "$_lt_result"; then
lt_cv_apple_cc_single_mod=yes
else
cat conftest.err >&AS_MESSAGE_LOG_FD
@@ -929,6 +1021,7 @@
rm -rf libconftest.dylib*
rm -f conftest.*
fi])
+
AC_CACHE_CHECK([for -exported_symbols_list linker flag],
[lt_cv_ld_exported_symbols_list],
[lt_cv_ld_exported_symbols_list=no
@@ -938,13 +1031,41 @@
AC_LINK_IFELSE([AC_LANG_PROGRAM([],[])],
[lt_cv_ld_exported_symbols_list=yes],
[lt_cv_ld_exported_symbols_list=no])
- LDFLAGS="$save_LDFLAGS"
+ LDFLAGS=$save_LDFLAGS
])
+
+ AC_CACHE_CHECK([for -force_load linker flag],[lt_cv_ld_force_load],
+ [lt_cv_ld_force_load=no
+ cat > conftest.c << _LT_EOF
+int forced_loaded() { return 2;}
+_LT_EOF
+ echo "$LTCC $LTCFLAGS -c -o conftest.o conftest.c" >&AS_MESSAGE_LOG_FD
+ $LTCC $LTCFLAGS -c -o conftest.o conftest.c 2>&AS_MESSAGE_LOG_FD
+ echo "$AR cru libconftest.a conftest.o" >&AS_MESSAGE_LOG_FD
+ $AR cru libconftest.a conftest.o 2>&AS_MESSAGE_LOG_FD
+ echo "$RANLIB libconftest.a" >&AS_MESSAGE_LOG_FD
+ $RANLIB libconftest.a 2>&AS_MESSAGE_LOG_FD
+ cat > conftest.c << _LT_EOF
+int main() { return 0;}
+_LT_EOF
+ echo "$LTCC $LTCFLAGS $LDFLAGS -o conftest conftest.c -Wl,-force_load,./libconftest.a" >&AS_MESSAGE_LOG_FD
+ $LTCC $LTCFLAGS $LDFLAGS -o conftest conftest.c -Wl,-force_load,./libconftest.a 2>conftest.err
+ _lt_result=$?
+ if test -s conftest.err && $GREP force_load conftest.err; then
+ cat conftest.err >&AS_MESSAGE_LOG_FD
+ elif test -f conftest && test 0 = "$_lt_result" && $GREP forced_load conftest >/dev/null 2>&1; then
+ lt_cv_ld_force_load=yes
+ else
+ cat conftest.err >&AS_MESSAGE_LOG_FD
+ fi
+ rm -f conftest.err libconftest.a conftest conftest.c
+ rm -rf conftest.dSYM
+ ])
case $host_os in
rhapsody* | darwin1.[[012]])
- _lt_dar_allow_undefined='${wl}-undefined ${wl}suppress' ;;
+ _lt_dar_allow_undefined='$wl-undefined ${wl}suppress' ;;
darwin1.*)
- _lt_dar_allow_undefined='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ;;
+ _lt_dar_allow_undefined='$wl-flat_namespace $wl-undefined ${wl}suppress' ;;
darwin*) # darwin 5.x on
# if running on 10.5 or later, the deployment target defaults
# to the OS version, if on x86, and 10.4, the deployment
@@ -951,23 +1072,23 @@
# target defaults to 10.4. Don't you love it?
case ${MACOSX_DEPLOYMENT_TARGET-10.0},$host in
10.0,*86*-darwin8*|10.0,*-darwin[[91]]*)
- _lt_dar_allow_undefined='${wl}-undefined ${wl}dynamic_lookup' ;;
- 10.[[012]]*)
- _lt_dar_allow_undefined='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ;;
+ _lt_dar_allow_undefined='$wl-undefined ${wl}dynamic_lookup' ;;
+ 10.[[012]][[,.]]*)
+ _lt_dar_allow_undefined='$wl-flat_namespace $wl-undefined ${wl}suppress' ;;
10.*)
- _lt_dar_allow_undefined='${wl}-undefined ${wl}dynamic_lookup' ;;
+ _lt_dar_allow_undefined='$wl-undefined ${wl}dynamic_lookup' ;;
esac
;;
esac
- if test "$lt_cv_apple_cc_single_mod" = "yes"; then
+ if test yes = "$lt_cv_apple_cc_single_mod"; then
_lt_dar_single_mod='$single_module'
fi
- if test "$lt_cv_ld_exported_symbols_list" = "yes"; then
- _lt_dar_export_syms=' ${wl}-exported_symbols_list,$output_objdir/${libname}-symbols.expsym'
+ if test yes = "$lt_cv_ld_exported_symbols_list"; then
+ _lt_dar_export_syms=' $wl-exported_symbols_list,$output_objdir/$libname-symbols.expsym'
else
- _lt_dar_export_syms='~$NMEDIT -s $output_objdir/${libname}-symbols.expsym ${lib}'
+ _lt_dar_export_syms='~$NMEDIT -s $output_objdir/$libname-symbols.expsym $lib'
fi
- if test "$DSYMUTIL" != ":"; then
+ if test : != "$DSYMUTIL" && test no = "$lt_cv_ld_force_load"; then
_lt_dsymutil='~$DSYMUTIL $lib || :'
else
_lt_dsymutil=
@@ -977,8 +1098,8 @@
])
-# _LT_DARWIN_LINKER_FEATURES
-# --------------------------
+# _LT_DARWIN_LINKER_FEATURES([TAG])
+# ---------------------------------
# Checks for linker and compiler features on darwin
m4_defun([_LT_DARWIN_LINKER_FEATURES],
[
@@ -987,23 +1108,29 @@
_LT_TAGVAR(hardcode_direct, $1)=no
_LT_TAGVAR(hardcode_automatic, $1)=yes
_LT_TAGVAR(hardcode_shlibpath_var, $1)=unsupported
- _LT_TAGVAR(whole_archive_flag_spec, $1)=''
+ if test yes = "$lt_cv_ld_force_load"; then
+ _LT_TAGVAR(whole_archive_flag_spec, $1)='`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience $wl-force_load,$conv\"; done; func_echo_all \"$new_convenience\"`'
+ m4_case([$1], [F77], [_LT_TAGVAR(compiler_needs_object, $1)=yes],
+ [FC], [_LT_TAGVAR(compiler_needs_object, $1)=yes])
+ else
+ _LT_TAGVAR(whole_archive_flag_spec, $1)=''
+ fi
_LT_TAGVAR(link_all_deplibs, $1)=yes
- _LT_TAGVAR(allow_undefined_flag, $1)="$_lt_dar_allow_undefined"
+ _LT_TAGVAR(allow_undefined_flag, $1)=$_lt_dar_allow_undefined
case $cc_basename in
- ifort*) _lt_dar_can_shared=yes ;;
+ ifort*|nagfor*) _lt_dar_can_shared=yes ;;
*) _lt_dar_can_shared=$GCC ;;
esac
- if test "$_lt_dar_can_shared" = "yes"; then
- output_verbose_link_cmd=echo
- _LT_TAGVAR(archive_cmds, $1)="\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod${_lt_dsymutil}"
- _LT_TAGVAR(module_cmds, $1)="\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dsymutil}"
- _LT_TAGVAR(archive_expsym_cmds, $1)="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring ${_lt_dar_single_mod}${_lt_dar_export_syms}${_lt_dsymutil}"
- _LT_TAGVAR(module_expsym_cmds, $1)="sed -e 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dar_export_syms}${_lt_dsymutil}"
+ if test yes = "$_lt_dar_can_shared"; then
+ output_verbose_link_cmd=func_echo_all
+ _LT_TAGVAR(archive_cmds, $1)="\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod$_lt_dsymutil"
+ _LT_TAGVAR(module_cmds, $1)="\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags$_lt_dsymutil"
+ _LT_TAGVAR(archive_expsym_cmds, $1)="sed 's|^|_|' < \$export_symbols > \$output_objdir/\$libname-symbols.expsym~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod$_lt_dar_export_syms$_lt_dsymutil"
+ _LT_TAGVAR(module_expsym_cmds, $1)="sed -e 's|^|_|' < \$export_symbols > \$output_objdir/\$libname-symbols.expsym~\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags$_lt_dar_export_syms$_lt_dsymutil"
m4_if([$1], [CXX],
-[ if test "$lt_cv_apple_cc_single_mod" != "yes"; then
- _LT_TAGVAR(archive_cmds, $1)="\$CC -r -keep_private_externs -nostdlib -o \${lib}-master.o \$libobjs~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \${lib}-master.o \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring${_lt_dsymutil}"
- _LT_TAGVAR(archive_expsym_cmds, $1)="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -r -keep_private_externs -nostdlib -o \${lib}-master.o \$libobjs~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \${lib}-master.o \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring${_lt_dar_export_syms}${_lt_dsymutil}"
+[ if test yes != "$lt_cv_apple_cc_single_mod"; then
+ _LT_TAGVAR(archive_cmds, $1)="\$CC -r -keep_private_externs -nostdlib -o \$lib-master.o \$libobjs~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$lib-master.o \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring$_lt_dsymutil"
+ _LT_TAGVAR(archive_expsym_cmds, $1)="sed 's|^|_|' < \$export_symbols > \$output_objdir/\$libname-symbols.expsym~\$CC -r -keep_private_externs -nostdlib -o \$lib-master.o \$libobjs~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$lib-master.o \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring$_lt_dar_export_syms$_lt_dsymutil"
fi
],[])
else
@@ -1011,8 +1138,8 @@
fi
])
-# _LT_SYS_MODULE_PATH_AIX
-# -----------------------
+# _LT_SYS_MODULE_PATH_AIX([TAGNAME])
+# ----------------------------------
# Links a minimal program and checks the executable
# for the system default hardcoded library path. In most cases,
# this is /usr/lib:/lib, but when the MPI compilers are used
@@ -1019,22 +1146,33 @@
# the location of the communication and MPI libs are included too.
# If we don't find anything, use the default library path according
# to the aix ld manual.
+# Store the results from the different compilers for each TAGNAME.
+# Allow to override them for all tags through lt_cv_aix_libpath.
m4_defun([_LT_SYS_MODULE_PATH_AIX],
[m4_require([_LT_DECL_SED])dnl
-AC_LINK_IFELSE(AC_LANG_PROGRAM,[
-lt_aix_libpath_sed='
- /Import File Strings/,/^$/ {
- /^0/ {
- s/^0 *\(.*\)$/\1/
- p
- }
- }'
-aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
-# Check for a 64-bit object if we didn't find anything.
-if test -z "$aix_libpath"; then
- aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
-fi],[])
-if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
+if test set = "${lt_cv_aix_libpath+set}"; then
+ aix_libpath=$lt_cv_aix_libpath
+else
+ AC_CACHE_VAL([_LT_TAGVAR([lt_cv_aix_libpath_], [$1])],
+ [AC_LINK_IFELSE([AC_LANG_PROGRAM],[
+ lt_aix_libpath_sed='[
+ /Import File Strings/,/^$/ {
+ /^0/ {
+ s/^0 *\([^ ]*\) *$/\1/
+ p
+ }
+ }]'
+ _LT_TAGVAR([lt_cv_aix_libpath_], [$1])=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
+ # Check for a 64-bit object if we didn't find anything.
+ if test -z "$_LT_TAGVAR([lt_cv_aix_libpath_], [$1])"; then
+ _LT_TAGVAR([lt_cv_aix_libpath_], [$1])=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
+ fi],[])
+ if test -z "$_LT_TAGVAR([lt_cv_aix_libpath_], [$1])"; then
+ _LT_TAGVAR([lt_cv_aix_libpath_], [$1])=/usr/lib:/lib
+ fi
+ ])
+ aix_libpath=$_LT_TAGVAR([lt_cv_aix_libpath_], [$1])
+fi
])# _LT_SYS_MODULE_PATH_AIX
@@ -1041,173 +1179,102 @@
# _LT_SHELL_INIT(ARG)
# -------------------
m4_define([_LT_SHELL_INIT],
-[ifdef([AC_DIVERSION_NOTICE],
- [AC_DIVERT_PUSH(AC_DIVERSION_NOTICE)],
- [AC_DIVERT_PUSH(NOTICE)])
-$1
-AC_DIVERT_POP
-])# _LT_SHELL_INIT
+[m4_divert_text([M4SH-INIT], [$1
+])])# _LT_SHELL_INIT
+
# _LT_PROG_ECHO_BACKSLASH
# -----------------------
-# Add some code to the start of the generated configure script which
-# will find an echo command which doesn't interpret backslashes.
+# Find how we can fake an echo command that does not interpret backslash.
+# In particular, with Autoconf 2.60 or later we add some code to the start
+# of the generated configure script that will find a shell with a builtin
+# printf (that we can use as an echo command).
m4_defun([_LT_PROG_ECHO_BACKSLASH],
-[_LT_SHELL_INIT([
-# Check that we are running under the correct shell.
-SHELL=${CONFIG_SHELL-/bin/sh}
+[ECHO='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\'
+ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO
+ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO$ECHO
-case X$lt_ECHO in
-X*--fallback-echo)
- # Remove one level of quotation (which was required for Make).
- ECHO=`echo "$lt_ECHO" | sed 's,\\\\\[$]\\[$]0,'[$]0','`
- ;;
-esac
-
-ECHO=${lt_ECHO-echo}
-if test "X[$]1" = X--no-reexec; then
- # Discard the --no-reexec flag, and continue.
- shift
-elif test "X[$]1" = X--fallback-echo; then
- # Avoid inline document here, it may be left over
- :
-elif test "X`{ $ECHO '\t'; } 2>/dev/null`" = 'X\t' ; then
- # Yippee, $ECHO works!
- :
+AC_MSG_CHECKING([how to print strings])
+# Test print first, because it will be a builtin if present.
+if test "X`( print -r -- -n ) 2>/dev/null`" = X-n && \
+ test "X`print -r -- $ECHO 2>/dev/null`" = "X$ECHO"; then
+ ECHO='print -r --'
+elif test "X`printf %s $ECHO 2>/dev/null`" = "X$ECHO"; then
+ ECHO='printf %s\n'
else
- # Restart under the correct shell.
- exec $SHELL "[$]0" --no-reexec ${1+"[$]@"}
+ # Use this function as a fallback that always works.
+ func_fallback_echo ()
+ {
+ eval 'cat <<_LTECHO_EOF
+$[]1
+_LTECHO_EOF'
+ }
+ ECHO='func_fallback_echo'
fi
-if test "X[$]1" = X--fallback-echo; then
- # used as fallback echo
- shift
- cat <<_LT_EOF
-[$]*
-_LT_EOF
- exit 0
-fi
+# func_echo_all arg...
+# Invoke $ECHO with all args, space-separated.
+func_echo_all ()
+{
+ $ECHO "$*"
+}
-# The HP-UX ksh and POSIX shell print the target directory to stdout
-# if CDPATH is set.
-(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
+case $ECHO in
+ printf*) AC_MSG_RESULT([printf]) ;;
+ print*) AC_MSG_RESULT([print -r]) ;;
+ *) AC_MSG_RESULT([cat]) ;;
+esac
-if test -z "$lt_ECHO"; then
- if test "X${echo_test_string+set}" != Xset; then
- # find a string as large as possible, as long as the shell can cope with it
- for cmd in 'sed 50q "[$]0"' 'sed 20q "[$]0"' 'sed 10q "[$]0"' 'sed 2q "[$]0"' 'echo test'; do
- # expected sizes: less than 2Kb, 1Kb, 512 bytes, 16 bytes, ...
- if { echo_test_string=`eval $cmd`; } 2>/dev/null &&
- { test "X$echo_test_string" = "X$echo_test_string"; } 2>/dev/null
- then
- break
- fi
- done
- fi
+m4_ifdef([_AS_DETECT_SUGGESTED],
+[_AS_DETECT_SUGGESTED([
+ test -n "${ZSH_VERSION+set}${BASH_VERSION+set}" || (
+ ECHO='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\'
+ ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO
+ ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO$ECHO
+ PATH=/empty FPATH=/empty; export PATH FPATH
+ test "X`printf %s $ECHO`" = "X$ECHO" \
+ || test "X`print -r -- $ECHO`" = "X$ECHO" )])])
- if test "X`{ $ECHO '\t'; } 2>/dev/null`" = 'X\t' &&
- echo_testing_string=`{ $ECHO "$echo_test_string"; } 2>/dev/null` &&
- test "X$echo_testing_string" = "X$echo_test_string"; then
- :
- else
- # The Solaris, AIX, and Digital Unix default echo programs unquote
- # backslashes. This makes it impossible to quote backslashes using
- # echo "$something" | sed 's/\\/\\\\/g'
- #
- # So, first we look for a working echo in the user's PATH.
+_LT_DECL([], [SHELL], [1], [Shell to use when invoking shell scripts])
+_LT_DECL([], [ECHO], [1], [An echo program that protects backslashes])
+])# _LT_PROG_ECHO_BACKSLASH
- lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
- for dir in $PATH /usr/ucb; do
- IFS="$lt_save_ifs"
- if (test -f $dir/echo || test -f $dir/echo$ac_exeext) &&
- test "X`($dir/echo '\t') 2>/dev/null`" = 'X\t' &&
- echo_testing_string=`($dir/echo "$echo_test_string") 2>/dev/null` &&
- test "X$echo_testing_string" = "X$echo_test_string"; then
- ECHO="$dir/echo"
- break
- fi
- done
- IFS="$lt_save_ifs"
- if test "X$ECHO" = Xecho; then
- # We didn't find a better echo, so look for alternatives.
- if test "X`{ print -r '\t'; } 2>/dev/null`" = 'X\t' &&
- echo_testing_string=`{ print -r "$echo_test_string"; } 2>/dev/null` &&
- test "X$echo_testing_string" = "X$echo_test_string"; then
- # This shell has a builtin print -r that does the trick.
- ECHO='print -r'
- elif { test -f /bin/ksh || test -f /bin/ksh$ac_exeext; } &&
- test "X$CONFIG_SHELL" != X/bin/ksh; then
- # If we have ksh, try running configure again with it.
- ORIGINAL_CONFIG_SHELL=${CONFIG_SHELL-/bin/sh}
- export ORIGINAL_CONFIG_SHELL
- CONFIG_SHELL=/bin/ksh
- export CONFIG_SHELL
- exec $CONFIG_SHELL "[$]0" --no-reexec ${1+"[$]@"}
- else
- # Try using printf.
- ECHO='printf %s\n'
- if test "X`{ $ECHO '\t'; } 2>/dev/null`" = 'X\t' &&
- echo_testing_string=`{ $ECHO "$echo_test_string"; } 2>/dev/null` &&
- test "X$echo_testing_string" = "X$echo_test_string"; then
- # Cool, printf works
- :
- elif echo_testing_string=`($ORIGINAL_CONFIG_SHELL "[$]0" --fallback-echo '\t') 2>/dev/null` &&
- test "X$echo_testing_string" = 'X\t' &&
- echo_testing_string=`($ORIGINAL_CONFIG_SHELL "[$]0" --fallback-echo "$echo_test_string") 2>/dev/null` &&
- test "X$echo_testing_string" = "X$echo_test_string"; then
- CONFIG_SHELL=$ORIGINAL_CONFIG_SHELL
- export CONFIG_SHELL
- SHELL="$CONFIG_SHELL"
- export SHELL
- ECHO="$CONFIG_SHELL [$]0 --fallback-echo"
- elif echo_testing_string=`($CONFIG_SHELL "[$]0" --fallback-echo '\t') 2>/dev/null` &&
- test "X$echo_testing_string" = 'X\t' &&
- echo_testing_string=`($CONFIG_SHELL "[$]0" --fallback-echo "$echo_test_string") 2>/dev/null` &&
- test "X$echo_testing_string" = "X$echo_test_string"; then
- ECHO="$CONFIG_SHELL [$]0 --fallback-echo"
- else
- # maybe with a smaller string...
- prev=:
+# _LT_WITH_SYSROOT
+# ----------------
+AC_DEFUN([_LT_WITH_SYSROOT],
+[AC_MSG_CHECKING([for sysroot])
+AC_ARG_WITH([sysroot],
+[AS_HELP_STRING([--with-sysroot@<:@=DIR@:>@],
+ [Search for dependent libraries within DIR (or the compiler's sysroot
+ if not specified).])],
+[], [with_sysroot=no])
- for cmd in 'echo test' 'sed 2q "[$]0"' 'sed 10q "[$]0"' 'sed 20q "[$]0"' 'sed 50q "[$]0"'; do
- if { test "X$echo_test_string" = "X`eval $cmd`"; } 2>/dev/null
- then
- break
- fi
- prev="$cmd"
- done
+dnl lt_sysroot will always be passed unquoted. We quote it here
+dnl in case the user passed a directory name.
+lt_sysroot=
+case $with_sysroot in #(
+ yes)
+ if test yes = "$GCC"; then
+ lt_sysroot=`$CC --print-sysroot 2>/dev/null`
+ fi
+ ;; #(
+ /*)
+ lt_sysroot=`echo "$with_sysroot" | sed -e "$sed_quote_subst"`
+ ;; #(
+ no|'')
+ ;; #(
+ *)
+ AC_MSG_RESULT([$with_sysroot])
+ AC_MSG_ERROR([The sysroot must be an absolute path.])
+ ;;
+esac
- if test "$prev" != 'sed 50q "[$]0"'; then
- echo_test_string=`eval $prev`
- export echo_test_string
- exec ${ORIGINAL_CONFIG_SHELL-${CONFIG_SHELL-/bin/sh}} "[$]0" ${1+"[$]@"}
- else
- # Oops. We lost completely, so just stick with echo.
- ECHO=echo
- fi
- fi
- fi
- fi
- fi
-fi
+ AC_MSG_RESULT([${lt_sysroot:-no}])
+_LT_DECL([], [lt_sysroot], [0], [The root where to search for ]dnl
+[dependent libraries, and where our libraries should be installed.])])
-# Copy echo and quote the copy suitably for passing to libtool from
-# the Makefile, instead of quoting the original, which is used later.
-lt_ECHO=$ECHO
-if test "X$lt_ECHO" = "X$CONFIG_SHELL [$]0 --fallback-echo"; then
- lt_ECHO="$CONFIG_SHELL \\\$\[$]0 --fallback-echo"
-fi
-
-AC_SUBST(lt_ECHO)
-])
-_LT_DECL([], [SHELL], [1], [Shell to use when invoking shell scripts])
-_LT_DECL([], [ECHO], [1],
- [An echo program that does not interpret backslashes])
-])# _LT_PROG_ECHO_BACKSLASH
-
-
# _LT_ENABLE_LOCK
# ---------------
m4_defun([_LT_ENABLE_LOCK],
@@ -1214,21 +1281,22 @@
[AC_ARG_ENABLE([libtool-lock],
[AS_HELP_STRING([--disable-libtool-lock],
[avoid locking (might break parallel builds)])])
-test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes
+test no = "$enable_libtool_lock" || enable_libtool_lock=yes
# Some flags need to be propagated to the compiler or linker for good
# libtool support.
case $host in
ia64-*-hpux*)
- # Find out which ABI we are using.
+ # Find out what ABI is being produced by ac_compile, and set mode
+ # options accordingly.
echo 'int i;' > conftest.$ac_ext
if AC_TRY_EVAL(ac_compile); then
case `/usr/bin/file conftest.$ac_objext` in
*ELF-32*)
- HPUX_IA64_MODE="32"
+ HPUX_IA64_MODE=32
;;
*ELF-64*)
- HPUX_IA64_MODE="64"
+ HPUX_IA64_MODE=64
;;
esac
fi
@@ -1235,10 +1303,11 @@
rm -rf conftest*
;;
*-*-irix6*)
- # Find out which ABI we are using.
- echo '[#]line __oline__ "configure"' > conftest.$ac_ext
+ # Find out what ABI is being produced by ac_compile, and set linker
+ # options accordingly.
+ echo '[#]line '$LINENO' "configure"' > conftest.$ac_ext
if AC_TRY_EVAL(ac_compile); then
- if test "$lt_cv_prog_gnu_ld" = yes; then
+ if test yes = "$lt_cv_prog_gnu_ld"; then
case `/usr/bin/file conftest.$ac_objext` in
*32-bit*)
LD="${LD-ld} -melf32bsmip"
@@ -1267,9 +1336,46 @@
rm -rf conftest*
;;
-x86_64-*kfreebsd*-gnu|x86_64-*linux*|ppc*-*linux*|powerpc*-*linux*| \
+mips64*-*linux*)
+ # Find out what ABI is being produced by ac_compile, and set linker
+ # options accordingly.
+ echo '[#]line '$LINENO' "configure"' > conftest.$ac_ext
+ if AC_TRY_EVAL(ac_compile); then
+ emul=elf
+ case `/usr/bin/file conftest.$ac_objext` in
+ *32-bit*)
+ emul="${emul}32"
+ ;;
+ *64-bit*)
+ emul="${emul}64"
+ ;;
+ esac
+ case `/usr/bin/file conftest.$ac_objext` in
+ *MSB*)
+ emul="${emul}btsmip"
+ ;;
+ *LSB*)
+ emul="${emul}ltsmip"
+ ;;
+ esac
+ case `/usr/bin/file conftest.$ac_objext` in
+ *N32*)
+ emul="${emul}n32"
+ ;;
+ esac
+ LD="${LD-ld} -m $emul"
+ fi
+ rm -rf conftest*
+ ;;
+
+x86_64-*kfreebsd*-gnu|x86_64-*linux*|powerpc*-*linux*| \
s390*-*linux*|s390*-*tpf*|sparc*-*linux*)
- # Find out which ABI we are using.
+ # Find out what ABI is being produced by ac_compile, and set linker
+ # options accordingly. Note that the listed cases only cover the
+ # situations where additional linker options are needed (such as when
+ # doing 32-bit compilation for a host where ld defaults to 64-bit, or
+ # vice versa); the common cases where no linker options are needed do
+ # not appear in the list.
echo 'int i;' > conftest.$ac_ext
if AC_TRY_EVAL(ac_compile); then
case `/usr/bin/file conftest.o` in
@@ -1279,9 +1385,19 @@
LD="${LD-ld} -m elf_i386_fbsd"
;;
x86_64-*linux*)
- LD="${LD-ld} -m elf_i386"
+ case `/usr/bin/file conftest.o` in
+ *x86-64*)
+ LD="${LD-ld} -m elf32_x86_64"
+ ;;
+ *)
+ LD="${LD-ld} -m elf_i386"
+ ;;
+ esac
;;
- ppc64-*linux*|powerpc64-*linux*)
+ powerpc64le-*linux*)
+ LD="${LD-ld} -m elf32lppclinux"
+ ;;
+ powerpc64-*linux*)
LD="${LD-ld} -m elf32ppclinux"
;;
s390x-*linux*)
@@ -1300,7 +1416,10 @@
x86_64-*linux*)
LD="${LD-ld} -m elf_x86_64"
;;
- ppc*-*linux*|powerpc*-*linux*)
+ powerpcle-*linux*)
+ LD="${LD-ld} -m elf64lppc"
+ ;;
+ powerpc-*linux*)
LD="${LD-ld} -m elf64ppc"
;;
s390*-*linux*|s390*-*tpf*)
@@ -1318,25 +1437,39 @@
*-*-sco3.2v5*)
# On SCO OpenServer 5, we need -belf to get full-featured binaries.
- SAVE_CFLAGS="$CFLAGS"
+ SAVE_CFLAGS=$CFLAGS
CFLAGS="$CFLAGS -belf"
AC_CACHE_CHECK([whether the C compiler needs -belf], lt_cv_cc_needs_belf,
[AC_LANG_PUSH(C)
AC_LINK_IFELSE([AC_LANG_PROGRAM([[]],[[]])],[lt_cv_cc_needs_belf=yes],[lt_cv_cc_needs_belf=no])
AC_LANG_POP])
- if test x"$lt_cv_cc_needs_belf" != x"yes"; then
+ if test yes != "$lt_cv_cc_needs_belf"; then
# this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf
- CFLAGS="$SAVE_CFLAGS"
+ CFLAGS=$SAVE_CFLAGS
fi
;;
-sparc*-*solaris*)
- # Find out which ABI we are using.
+*-*solaris*)
+ # Find out what ABI is being produced by ac_compile, and set linker
+ # options accordingly.
echo 'int i;' > conftest.$ac_ext
if AC_TRY_EVAL(ac_compile); then
case `/usr/bin/file conftest.o` in
*64-bit*)
case $lt_cv_prog_gnu_ld in
- yes*) LD="${LD-ld} -m elf64_sparc" ;;
+ yes*)
+ case $host in
+ i?86-*-solaris*|x86_64-*-solaris*)
+ LD="${LD-ld} -m elf_x86_64"
+ ;;
+ sparc*-*-solaris*)
+ LD="${LD-ld} -m elf64_sparc"
+ ;;
+ esac
+ # GNU ld 2.21 introduced _sol2 emulations. Use them if available.
+ if ${LD-ld} -V | grep _sol2 >/dev/null 2>&1; then
+ LD=${LD-ld}_sol2
+ fi
+ ;;
*)
if ${LD-ld} -64 -r -o conftest2.o conftest.o >/dev/null 2>&1; then
LD="${LD-ld} -64"
@@ -1350,18 +1483,51 @@
;;
esac
-need_locks="$enable_libtool_lock"
+need_locks=$enable_libtool_lock
])# _LT_ENABLE_LOCK
+# _LT_PROG_AR
+# -----------
+m4_defun([_LT_PROG_AR],
+[AC_CHECK_TOOLS(AR, [ar], false)
+: ${AR=ar}
+: ${AR_FLAGS=cru}
+_LT_DECL([], [AR], [1], [The archiver])
+_LT_DECL([], [AR_FLAGS], [1], [Flags to create an archive])
+
+AC_CACHE_CHECK([for archiver @FILE support], [lt_cv_ar_at_file],
+ [lt_cv_ar_at_file=no
+ AC_COMPILE_IFELSE([AC_LANG_PROGRAM],
+ [echo conftest.$ac_objext > conftest.lst
+ lt_ar_try='$AR $AR_FLAGS libconftest.a @conftest.lst >&AS_MESSAGE_LOG_FD'
+ AC_TRY_EVAL([lt_ar_try])
+ if test 0 -eq "$ac_status"; then
+ # Ensure the archiver fails upon bogus file names.
+ rm -f conftest.$ac_objext libconftest.a
+ AC_TRY_EVAL([lt_ar_try])
+ if test 0 -ne "$ac_status"; then
+ lt_cv_ar_at_file=@
+ fi
+ fi
+ rm -f conftest.* libconftest.a
+ ])
+ ])
+
+if test no = "$lt_cv_ar_at_file"; then
+ archiver_list_spec=
+else
+ archiver_list_spec=$lt_cv_ar_at_file
+fi
+_LT_DECL([], [archiver_list_spec], [1],
+ [How to feed a file listing to the archiver])
+])# _LT_PROG_AR
+
+
# _LT_CMD_OLD_ARCHIVE
# -------------------
m4_defun([_LT_CMD_OLD_ARCHIVE],
-[AC_CHECK_TOOL(AR, ar, false)
-test -z "$AR" && AR=ar
-test -z "$AR_FLAGS" && AR_FLAGS=cru
-_LT_DECL([], [AR], [1], [The archiver])
-_LT_DECL([], [AR_FLAGS], [1])
+[_LT_PROG_AR
AC_CHECK_TOOL(STRIP, strip, :)
test -z "$STRIP" && STRIP=:
@@ -1379,19 +1545,28 @@
if test -n "$RANLIB"; then
case $host_os in
- openbsd*)
- old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB -t \$oldlib"
+ bitrig* | openbsd*)
+ old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB -t \$tool_oldlib"
;;
*)
- old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB \$oldlib"
+ old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB \$tool_oldlib"
;;
esac
- old_archive_cmds="$old_archive_cmds~\$RANLIB \$oldlib"
+ old_archive_cmds="$old_archive_cmds~\$RANLIB \$tool_oldlib"
fi
+
+case $host_os in
+ darwin*)
+ lock_old_archive_extraction=yes ;;
+ *)
+ lock_old_archive_extraction=no ;;
+esac
_LT_DECL([], [old_postinstall_cmds], [2])
_LT_DECL([], [old_postuninstall_cmds], [2])
_LT_TAGDECL([], [old_archive_cmds], [2],
[Commands used to build an old-style archive])
+_LT_DECL([], [lock_old_archive_extraction], [0],
+ [Whether to use a lock for old archive extraction])
])# _LT_CMD_OLD_ARCHIVE
@@ -1406,7 +1581,7 @@
[$2=no
m4_if([$4], , [ac_outfile=conftest.$ac_objext], [ac_outfile=$4])
echo "$lt_simple_compile_test_code" > conftest.$ac_ext
- lt_compiler_flag="$3"
+ lt_compiler_flag="$3" ## exclude from sc_useless_quotes_in_assignment
# Insert the option either (1) after the last *FLAGS variable, or
# (2) before a word containing "conftest.", or (3) at the end.
# Note that $ac_compile itself does not contain backslashes and begins
@@ -1416,15 +1591,15 @@
-e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
-e 's: [[^ ]]*conftest\.: $lt_compiler_flag&:; t' \
-e 's:$: $lt_compiler_flag:'`
- (eval echo "\"\$as_me:__oline__: $lt_compile\"" >&AS_MESSAGE_LOG_FD)
+ (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&AS_MESSAGE_LOG_FD)
(eval "$lt_compile" 2>conftest.err)
ac_status=$?
cat conftest.err >&AS_MESSAGE_LOG_FD
- echo "$as_me:__oline__: \$? = $ac_status" >&AS_MESSAGE_LOG_FD
+ echo "$as_me:$LINENO: \$? = $ac_status" >&AS_MESSAGE_LOG_FD
if (exit $ac_status) && test -s "$ac_outfile"; then
# The compiler can only warn and ignore the option if not recognized
# So say no if there are warnings other than the usual output.
- $ECHO "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' >conftest.exp
+ $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' >conftest.exp
$SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then
$2=yes
@@ -1433,7 +1608,7 @@
$RM conftest*
])
-if test x"[$]$2" = xyes; then
+if test yes = "[$]$2"; then
m4_if([$5], , :, [$5])
else
m4_if([$6], , :, [$6])
@@ -1455,7 +1630,7 @@
m4_require([_LT_DECL_SED])dnl
AC_CACHE_CHECK([$1], [$2],
[$2=no
- save_LDFLAGS="$LDFLAGS"
+ save_LDFLAGS=$LDFLAGS
LDFLAGS="$LDFLAGS $3"
echo "$lt_simple_link_test_code" > conftest.$ac_ext
if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then
@@ -1464,7 +1639,7 @@
if test -s conftest.err; then
# Append any errors to the config.log.
cat conftest.err 1>&AS_MESSAGE_LOG_FD
- $ECHO "X$_lt_linker_boilerplate" | $Xsed -e '/^$/d' > conftest.exp
+ $ECHO "$_lt_linker_boilerplate" | $SED '/^$/d' > conftest.exp
$SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
if diff conftest.exp conftest.er2 >/dev/null; then
$2=yes
@@ -1474,10 +1649,10 @@
fi
fi
$RM -r conftest*
- LDFLAGS="$save_LDFLAGS"
+ LDFLAGS=$save_LDFLAGS
])
-if test x"[$]$2" = xyes; then
+if test yes = "[$]$2"; then
m4_if([$4], , :, [$4])
else
m4_if([$5], , :, [$5])
@@ -1498,7 +1673,7 @@
AC_MSG_CHECKING([the maximum length of command line arguments])
AC_CACHE_VAL([lt_cv_sys_max_cmd_len], [dnl
i=0
- teststring="ABCD"
+ teststring=ABCD
case $build_os in
msdosdjgpp*)
@@ -1527,6 +1702,11 @@
lt_cv_sys_max_cmd_len=8192;
;;
+ mint*)
+ # On MiNT this can take a long time and run out of memory.
+ lt_cv_sys_max_cmd_len=8192;
+ ;;
+
amigaos*)
# On AmigaOS with pdksh, this test takes hours, literally.
# So we just punt and use a minimum line length of 8192.
@@ -1533,7 +1713,7 @@
lt_cv_sys_max_cmd_len=8192;
;;
- netbsd* | freebsd* | openbsd* | darwin* | dragonfly*)
+ bitrig* | darwin* | dragonfly* | freebsd* | netbsd* | openbsd*)
# This has been around since 386BSD, at least. Likely further.
if test -x /sbin/sysctl; then
lt_cv_sys_max_cmd_len=`/sbin/sysctl -n kern.argmax`
@@ -1552,6 +1732,11 @@
lt_cv_sys_max_cmd_len=196608
;;
+ os2*)
+ # The test takes a long time on OS/2.
+ lt_cv_sys_max_cmd_len=8192
+ ;;
+
osf*)
# Dr. Hans Ekkehard Plesser reports seeing a kernel panic running configure
# due to this test when exec_disable_arg_limit is 1 on Tru64. It is not
@@ -1578,13 +1763,14 @@
;;
*)
lt_cv_sys_max_cmd_len=`(getconf ARG_MAX) 2> /dev/null`
- if test -n "$lt_cv_sys_max_cmd_len"; then
+ if test -n "$lt_cv_sys_max_cmd_len" && \
+ test undefined != "$lt_cv_sys_max_cmd_len"; then
lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4`
lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3`
else
# Make teststring a little bigger before we do anything with it.
# a 1K string should be a reasonable start.
- for i in 1 2 3 4 5 6 7 8 ; do
+ for i in 1 2 3 4 5 6 7 8; do
teststring=$teststring$teststring
done
SHELL=${SHELL-${CONFIG_SHELL-/bin/sh}}
@@ -1591,9 +1777,9 @@
# If test is not a shell built-in, we'll probably end up computing a
# maximum length that is only half of the actual maximum length, but
# we can't tell.
- while { test "X"`$SHELL [$]0 --fallback-echo "X$teststring$teststring" 2>/dev/null` \
- = "XX$teststring$teststring"; } >/dev/null 2>&1 &&
- test $i != 17 # 1/2 MB should be enough
+ while { test X`env echo "$teststring$teststring" 2>/dev/null` \
+ = "X$teststring$teststring"; } >/dev/null 2>&1 &&
+ test 17 != "$i" # 1/2 MB should be enough
do
i=`expr $i + 1`
teststring=$teststring$teststring
@@ -1609,7 +1795,7 @@
;;
esac
])
-if test -n $lt_cv_sys_max_cmd_len ; then
+if test -n "$lt_cv_sys_max_cmd_len"; then
AC_MSG_RESULT($lt_cv_sys_max_cmd_len)
else
AC_MSG_RESULT(none)
@@ -1637,13 +1823,13 @@
# ----------------------------------------------------------------
m4_defun([_LT_TRY_DLOPEN_SELF],
[m4_require([_LT_HEADER_DLFCN])dnl
-if test "$cross_compiling" = yes; then :
+if test yes = "$cross_compiling"; then :
[$4]
else
lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
lt_status=$lt_dlunknown
cat > conftest.$ac_ext <<_LT_EOF
-[#line __oline__ "configure"
+[#line $LINENO "configure"
#include "confdefs.h"
#if HAVE_DLFCN_H
@@ -1684,7 +1870,13 @@
# endif
#endif
-void fnord() { int i=42;}
+/* When -fvisibility=hidden is used, assume the code has been annotated
+ correspondingly for the symbols needed. */
+#if defined __GNUC__ && (((__GNUC__ == 3) && (__GNUC_MINOR__ >= 3)) || (__GNUC__ > 3))
+int fnord () __attribute__((visibility("default")));
+#endif
+
+int fnord () { return 42; }
int main ()
{
void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW);
@@ -1693,7 +1885,11 @@
if (self)
{
if (dlsym (self,"fnord")) status = $lt_dlno_uscore;
- else if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore;
+ else
+ {
+ if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore;
+ else puts (dlerror ());
+ }
/* dlclose (self); */
}
else
@@ -1702,7 +1898,7 @@
return status;
}]
_LT_EOF
- if AC_TRY_EVAL(ac_link) && test -s conftest${ac_exeext} 2>/dev/null; then
+ if AC_TRY_EVAL(ac_link) && test -s "conftest$ac_exeext" 2>/dev/null; then
(./conftest; exit; ) >&AS_MESSAGE_LOG_FD 2>/dev/null
lt_status=$?
case x$lt_status in
@@ -1723,7 +1919,7 @@
# ------------------
AC_DEFUN([LT_SYS_DLOPEN_SELF],
[m4_require([_LT_HEADER_DLFCN])dnl
-if test "x$enable_dlopen" != xyes; then
+if test yes != "$enable_dlopen"; then
enable_dlopen=unknown
enable_dlopen_self=unknown
enable_dlopen_self_static=unknown
@@ -1733,44 +1929,52 @@
case $host_os in
beos*)
- lt_cv_dlopen="load_add_on"
+ lt_cv_dlopen=load_add_on
lt_cv_dlopen_libs=
lt_cv_dlopen_self=yes
;;
mingw* | pw32* | cegcc*)
- lt_cv_dlopen="LoadLibrary"
+ lt_cv_dlopen=LoadLibrary
lt_cv_dlopen_libs=
;;
cygwin*)
- lt_cv_dlopen="dlopen"
+ lt_cv_dlopen=dlopen
lt_cv_dlopen_libs=
;;
darwin*)
- # if libdl is installed we need to link against it
+ # if libdl is installed we need to link against it
AC_CHECK_LIB([dl], [dlopen],
- [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"],[
- lt_cv_dlopen="dyld"
+ [lt_cv_dlopen=dlopen lt_cv_dlopen_libs=-ldl],[
+ lt_cv_dlopen=dyld
lt_cv_dlopen_libs=
lt_cv_dlopen_self=yes
])
;;
+ tpf*)
+ # Don't try to run any link tests for TPF. We know it's impossible
+ # because TPF is a cross-compiler, and we know how we open DSOs.
+ lt_cv_dlopen=dlopen
+ lt_cv_dlopen_libs=
+ lt_cv_dlopen_self=no
+ ;;
+
*)
AC_CHECK_FUNC([shl_load],
- [lt_cv_dlopen="shl_load"],
+ [lt_cv_dlopen=shl_load],
[AC_CHECK_LIB([dld], [shl_load],
- [lt_cv_dlopen="shl_load" lt_cv_dlopen_libs="-ldld"],
+ [lt_cv_dlopen=shl_load lt_cv_dlopen_libs=-ldld],
[AC_CHECK_FUNC([dlopen],
- [lt_cv_dlopen="dlopen"],
+ [lt_cv_dlopen=dlopen],
[AC_CHECK_LIB([dl], [dlopen],
- [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"],
+ [lt_cv_dlopen=dlopen lt_cv_dlopen_libs=-ldl],
[AC_CHECK_LIB([svld], [dlopen],
- [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-lsvld"],
+ [lt_cv_dlopen=dlopen lt_cv_dlopen_libs=-lsvld],
[AC_CHECK_LIB([dld], [dld_link],
- [lt_cv_dlopen="dld_link" lt_cv_dlopen_libs="-ldld"])
+ [lt_cv_dlopen=dld_link lt_cv_dlopen_libs=-ldld])
])
])
])
@@ -1779,21 +1983,21 @@
;;
esac
- if test "x$lt_cv_dlopen" != xno; then
+ if test no = "$lt_cv_dlopen"; then
+ enable_dlopen=no
+ else
enable_dlopen=yes
- else
- enable_dlopen=no
fi
case $lt_cv_dlopen in
dlopen)
- save_CPPFLAGS="$CPPFLAGS"
- test "x$ac_cv_header_dlfcn_h" = xyes && CPPFLAGS="$CPPFLAGS -DHAVE_DLFCN_H"
+ save_CPPFLAGS=$CPPFLAGS
+ test yes = "$ac_cv_header_dlfcn_h" && CPPFLAGS="$CPPFLAGS -DHAVE_DLFCN_H"
- save_LDFLAGS="$LDFLAGS"
+ save_LDFLAGS=$LDFLAGS
wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $export_dynamic_flag_spec\"
- save_LIBS="$LIBS"
+ save_LIBS=$LIBS
LIBS="$lt_cv_dlopen_libs $LIBS"
AC_CACHE_CHECK([whether a program can dlopen itself],
@@ -1803,7 +2007,7 @@
lt_cv_dlopen_self=no, lt_cv_dlopen_self=cross)
])
- if test "x$lt_cv_dlopen_self" = xyes; then
+ if test yes = "$lt_cv_dlopen_self"; then
wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $lt_prog_compiler_static\"
AC_CACHE_CHECK([whether a statically linked program can dlopen itself],
lt_cv_dlopen_self_static, [dnl
@@ -1813,9 +2017,9 @@
])
fi
- CPPFLAGS="$save_CPPFLAGS"
- LDFLAGS="$save_LDFLAGS"
- LIBS="$save_LIBS"
+ CPPFLAGS=$save_CPPFLAGS
+ LDFLAGS=$save_LDFLAGS
+ LIBS=$save_LIBS
;;
esac
@@ -1869,16 +2073,16 @@
-e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
-e 's: [[^ ]]*conftest\.: $lt_compiler_flag&:; t' \
-e 's:$: $lt_compiler_flag:'`
- (eval echo "\"\$as_me:__oline__: $lt_compile\"" >&AS_MESSAGE_LOG_FD)
+ (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&AS_MESSAGE_LOG_FD)
(eval "$lt_compile" 2>out/conftest.err)
ac_status=$?
cat out/conftest.err >&AS_MESSAGE_LOG_FD
- echo "$as_me:__oline__: \$? = $ac_status" >&AS_MESSAGE_LOG_FD
+ echo "$as_me:$LINENO: \$? = $ac_status" >&AS_MESSAGE_LOG_FD
if (exit $ac_status) && test -s out/conftest2.$ac_objext
then
# The compiler can only warn and ignore the option if not recognized
# So say no if there are warnings
- $ECHO "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' > out/conftest.exp
+ $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' > out/conftest.exp
$SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2
if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then
_LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)=yes
@@ -1907,8 +2111,8 @@
m4_require([_LT_FILEUTILS_DEFAULTS])dnl
_LT_COMPILER_C_O([$1])
-hard_links="nottested"
-if test "$_LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)" = no && test "$need_locks" != no; then
+hard_links=nottested
+if test no = "$_LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)" && test no != "$need_locks"; then
# do not overwrite the value of need_locks provided by the user
AC_MSG_CHECKING([if we can lock with hard links])
hard_links=yes
@@ -1918,8 +2122,8 @@
ln conftest.a conftest.b 2>&5 || hard_links=no
ln conftest.a conftest.b 2>/dev/null && hard_links=no
AC_MSG_RESULT([$hard_links])
- if test "$hard_links" = no; then
- AC_MSG_WARN([`$CC' does not support `-c -o', so `make -j' may be unsafe])
+ if test no = "$hard_links"; then
+ AC_MSG_WARN(['$CC' does not support '-c -o', so 'make -j' may be unsafe])
need_locks=warn
fi
else
@@ -1946,8 +2150,8 @@
_LT_DECL([], [objdir], [0],
[The name of the directory that contains temporary libtool files])dnl
m4_pattern_allow([LT_OBJDIR])dnl
-AC_DEFINE_UNQUOTED(LT_OBJDIR, "$lt_cv_objdir/",
- [Define to the sub-directory in which libtool stores uninstalled libraries.])
+AC_DEFINE_UNQUOTED([LT_OBJDIR], "$lt_cv_objdir/",
+ [Define to the sub-directory where libtool stores uninstalled libraries.])
])# _LT_CHECK_OBJDIR
@@ -1959,15 +2163,15 @@
_LT_TAGVAR(hardcode_action, $1)=
if test -n "$_LT_TAGVAR(hardcode_libdir_flag_spec, $1)" ||
test -n "$_LT_TAGVAR(runpath_var, $1)" ||
- test "X$_LT_TAGVAR(hardcode_automatic, $1)" = "Xyes" ; then
+ test yes = "$_LT_TAGVAR(hardcode_automatic, $1)"; then
# We can hardcode non-existent directories.
- if test "$_LT_TAGVAR(hardcode_direct, $1)" != no &&
+ if test no != "$_LT_TAGVAR(hardcode_direct, $1)" &&
# If the only mechanism to avoid hardcoding is shlibpath_var, we
# have to relink, otherwise we might link with an installed library
# when we should be linking with a yet-to-be-installed one
- ## test "$_LT_TAGVAR(hardcode_shlibpath_var, $1)" != no &&
- test "$_LT_TAGVAR(hardcode_minus_L, $1)" != no; then
+ ## test no != "$_LT_TAGVAR(hardcode_shlibpath_var, $1)" &&
+ test no != "$_LT_TAGVAR(hardcode_minus_L, $1)"; then
# Linking always hardcodes the temporary library directory.
_LT_TAGVAR(hardcode_action, $1)=relink
else
@@ -1981,12 +2185,12 @@
fi
AC_MSG_RESULT([$_LT_TAGVAR(hardcode_action, $1)])
-if test "$_LT_TAGVAR(hardcode_action, $1)" = relink ||
- test "$_LT_TAGVAR(inherit_rpath, $1)" = yes; then
+if test relink = "$_LT_TAGVAR(hardcode_action, $1)" ||
+ test yes = "$_LT_TAGVAR(inherit_rpath, $1)"; then
# Fast installation is not supported
enable_fast_install=no
-elif test "$shlibpath_overrides_runpath" = yes ||
- test "$enable_shared" = no; then
+elif test yes = "$shlibpath_overrides_runpath" ||
+ test no = "$enable_shared"; then
# Fast installation is not necessary
enable_fast_install=needless
fi
@@ -2010,7 +2214,7 @@
# FIXME - insert some real tests, host_os isn't really good enough
case $host_os in
darwin*)
- if test -n "$STRIP" ; then
+ if test -n "$STRIP"; then
striplib="$STRIP -x"
old_striplib="$STRIP -S"
AC_MSG_RESULT([yes])
@@ -2028,6 +2232,47 @@
])# _LT_CMD_STRIPLIB
+# _LT_PREPARE_MUNGE_PATH_LIST
+# ---------------------------
+# Make sure func_munge_path_list() is defined correctly.
+m4_defun([_LT_PREPARE_MUNGE_PATH_LIST],
+[[# func_munge_path_list VARIABLE PATH
+# -----------------------------------
+# VARIABLE is name of variable containing _space_ separated list of
+# directories to be munged by the contents of PATH, which is string
+# having a format:
+# "DIR[:DIR]:"
+# string "DIR[ DIR]" will be prepended to VARIABLE
+# ":DIR[:DIR]"
+# string "DIR[ DIR]" will be appended to VARIABLE
+# "DIRP[:DIRP]::[DIRA:]DIRA"
+# string "DIRP[ DIRP]" will be prepended to VARIABLE and string
+# "DIRA[ DIRA]" will be appended to VARIABLE
+# "DIR[:DIR]"
+# VARIABLE will be replaced by "DIR[ DIR]"
+func_munge_path_list ()
+{
+ case x at S|@2 in
+ x)
+ ;;
+ *:)
+ eval @S|@1=\"`$ECHO @S|@2 | $SED 's/:/ /g'` \@S|@@S|@1\"
+ ;;
+ x:*)
+ eval @S|@1=\"\@S|@@S|@1 `$ECHO @S|@2 | $SED 's/:/ /g'`\"
+ ;;
+ *::*)
+ eval @S|@1=\"\@S|@@S|@1\ `$ECHO @S|@2 | $SED -e 's/.*:://' -e 's/:/ /g'`\"
+ eval @S|@1=\"`$ECHO @S|@2 | $SED -e 's/::.*//' -e 's/:/ /g'`\ \@S|@@S|@1\"
+ ;;
+ *)
+ eval @S|@1=\"`$ECHO @S|@2 | $SED 's/:/ /g'`\"
+ ;;
+ esac
+}
+]])# _LT_PREPARE_PATH_LIST
+
+
# _LT_SYS_DYNAMIC_LINKER([TAG])
# -----------------------------
# PORTME Fill in your ld.so characteristics
@@ -2037,40 +2282,56 @@
m4_require([_LT_FILEUTILS_DEFAULTS])dnl
m4_require([_LT_DECL_OBJDUMP])dnl
m4_require([_LT_DECL_SED])dnl
+m4_require([_LT_CHECK_SHELL_FEATURES])dnl
+m4_require([_LT_PREPARE_MUNGE_PATH_LIST])dnl
AC_MSG_CHECKING([dynamic linker characteristics])
m4_if([$1],
[], [
-if test "$GCC" = yes; then
+if test yes = "$GCC"; then
case $host_os in
- darwin*) lt_awk_arg="/^libraries:/,/LR/" ;;
- *) lt_awk_arg="/^libraries:/" ;;
+ darwin*) lt_awk_arg='/^libraries:/,/LR/' ;;
+ *) lt_awk_arg='/^libraries:/' ;;
esac
- lt_search_path_spec=`$CC -print-search-dirs | awk $lt_awk_arg | $SED -e "s/^libraries://" -e "s,=/,/,g"`
- if $ECHO "$lt_search_path_spec" | $GREP ';' >/dev/null ; then
+ case $host_os in
+ mingw* | cegcc*) lt_sed_strip_eq='s|=\([[A-Za-z]]:\)|\1|g' ;;
+ *) lt_sed_strip_eq='s|=/|/|g' ;;
+ esac
+ lt_search_path_spec=`$CC -print-search-dirs | awk $lt_awk_arg | $SED -e "s/^libraries://" -e $lt_sed_strip_eq`
+ case $lt_search_path_spec in
+ *\;*)
# if the path contains ";" then we assume it to be the separator
# otherwise default to the standard path separator (i.e. ":") - it is
# assumed that no part of a normal pathname contains ";" but that should
# okay in the real world where ";" in dirpaths is itself problematic.
- lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED -e 's/;/ /g'`
- else
- lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"`
- fi
+ lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED 's/;/ /g'`
+ ;;
+ *)
+ lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED "s/$PATH_SEPARATOR/ /g"`
+ ;;
+ esac
# Ok, now we have the path, separated by spaces, we can step through it
- # and add multilib dir if necessary.
+ # and add multilib dir if necessary...
lt_tmp_lt_search_path_spec=
- lt_multi_os_dir=`$CC $CPPFLAGS $CFLAGS $LDFLAGS -print-multi-os-directory 2>/dev/null`
+ lt_multi_os_dir=/`$CC $CPPFLAGS $CFLAGS $LDFLAGS -print-multi-os-directory 2>/dev/null`
+ # ...but if some path component already ends with the multilib dir we assume
+ # that all is fine and trust -print-search-dirs as is (GCC 4.2? or newer).
+ case "$lt_multi_os_dir; $lt_search_path_spec " in
+ "/; "* | "/.; "* | "/./; "* | *"$lt_multi_os_dir "* | *"$lt_multi_os_dir/ "*)
+ lt_multi_os_dir=
+ ;;
+ esac
for lt_sys_path in $lt_search_path_spec; do
- if test -d "$lt_sys_path/$lt_multi_os_dir"; then
- lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path/$lt_multi_os_dir"
- else
+ if test -d "$lt_sys_path$lt_multi_os_dir"; then
+ lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path$lt_multi_os_dir"
+ elif test -n "$lt_multi_os_dir"; then
test -d "$lt_sys_path" && \
lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path"
fi
done
- lt_search_path_spec=`$ECHO $lt_tmp_lt_search_path_spec | awk '
-BEGIN {RS=" "; FS="/|\n";} {
- lt_foo="";
- lt_count=0;
+ lt_search_path_spec=`$ECHO "$lt_tmp_lt_search_path_spec" | awk '
+BEGIN {RS = " "; FS = "/|\n";} {
+ lt_foo = "";
+ lt_count = 0;
for (lt_i = NF; lt_i > 0; lt_i--) {
if ($lt_i != "" && $lt_i != ".") {
if ($lt_i == "..") {
@@ -2077,7 +2338,7 @@
lt_count++;
} else {
if (lt_count == 0) {
- lt_foo="/" $lt_i lt_foo;
+ lt_foo = "/" $lt_i lt_foo;
} else {
lt_count--;
}
@@ -2087,7 +2348,13 @@
if (lt_foo != "") { lt_freq[[lt_foo]]++; }
if (lt_freq[[lt_foo]] == 1) { print lt_foo; }
}'`
- sys_lib_search_path_spec=`$ECHO $lt_search_path_spec`
+ # AWK program above erroneously prepends '/' to C:/dos/paths
+ # for these hosts.
+ case $host_os in
+ mingw* | cegcc*) lt_search_path_spec=`$ECHO "$lt_search_path_spec" |\
+ $SED 's|/\([[A-Za-z]]:\)|\1|g'` ;;
+ esac
+ sys_lib_search_path_spec=`$ECHO "$lt_search_path_spec" | $lt_NL2SP`
else
sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib"
fi])
@@ -2094,7 +2361,7 @@
library_names_spec=
libname_spec='lib$name'
soname_spec=
-shrext_cmds=".so"
+shrext_cmds=.so
postinstall_cmds=
postuninstall_cmds=
finish_cmds=
@@ -2111,36 +2378,39 @@
# flags to be left without arguments
need_version=unknown
+AC_ARG_VAR([LT_SYS_LIBRARY_PATH],
+[User-defined run-time library search path.])
+
case $host_os in
aix3*)
- version_type=linux
- library_names_spec='${libname}${release}${shared_ext}$versuffix $libname.a'
+ version_type=linux # correct to gnu/linux during the next big refactor
+ library_names_spec='$libname$release$shared_ext$versuffix $libname.a'
shlibpath_var=LIBPATH
# AIX 3 has no versioning support, so we append a major version to the name.
- soname_spec='${libname}${release}${shared_ext}$major'
+ soname_spec='$libname$release$shared_ext$major'
;;
aix[[4-9]]*)
- version_type=linux
+ version_type=linux # correct to gnu/linux during the next big refactor
need_lib_prefix=no
need_version=no
hardcode_into_libs=yes
- if test "$host_cpu" = ia64; then
+ if test ia64 = "$host_cpu"; then
# AIX 5 supports IA64
- library_names_spec='${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext}$versuffix $libname${shared_ext}'
+ library_names_spec='$libname$release$shared_ext$major $libname$release$shared_ext$versuffix $libname$shared_ext'
shlibpath_var=LD_LIBRARY_PATH
else
# With GCC up to 2.95.x, collect2 would create an import file
# for dependence libraries. The import file would start with
- # the line `#! .'. This would cause the generated library to
- # depend on `.', always an invalid library. This was fixed in
+ # the line '#! .'. This would cause the generated library to
+ # depend on '.', always an invalid library. This was fixed in
# development snapshots of GCC prior to 3.0.
case $host_os in
aix4 | aix4.[[01]] | aix4.[[01]].*)
if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)'
echo ' yes '
- echo '#endif'; } | ${CC} -E - | $GREP yes > /dev/null; then
+ echo '#endif'; } | $CC -E - | $GREP yes > /dev/null; then
:
else
can_build_shared=no
@@ -2147,20 +2417,70 @@
fi
;;
esac
- # AIX (on Power*) has no versioning support, so currently we can not hardcode correct
+ # Using Import Files as archive members, it is possible to support
+ # filename-based versioning of shared library archives on AIX. While
+ # this would work for both with and without runtime linking, it will
+ # prevent static linking of such archives. So we do filename-based
+ # shared library versioning with .so extension only, which is used
+ # when both runtime linking and shared linking is enabled.
+ # Unfortunately, runtime linking may impact performance, so we do
+ # not want this to be the default eventually. Also, we use the
+ # versioned .so libs for executables only if there is the -brtl
+ # linker flag in LDFLAGS as well, or --with-aix-soname=svr4 only.
+ # To allow for filename-based versioning support, we need to create
+ # libNAME.so.V as an archive file, containing:
+ # *) an Import File, referring to the versioned filename of the
+ # archive as well as the shared archive member, telling the
+ # bitwidth (32 or 64) of that shared object, and providing the
+ # list of exported symbols of that shared object, eventually
+ # decorated with the 'weak' keyword
+ # *) the shared object with the F_LOADONLY flag set, to really avoid
+ # it being seen by the linker.
+ # At run time we better use the real file rather than another symlink,
+ # but for link time we create the symlink libNAME.so -> libNAME.so.V
+
+ case $with_aix_soname,$aix_use_runtimelinking in
+ # AIX (on Power*) has no versioning support, so currently we cannot hardcode correct
# soname into executable. Probably we can add versioning support to
# collect2, so additional links can be useful in future.
- if test "$aix_use_runtimelinking" = yes; then
+ aix,yes) # traditional libtool
+ dynamic_linker='AIX unversionable lib.so'
# If using run time linking (on AIX 4.2 or later) use lib<name>.so
# instead of lib<name>.a to let people know that these are not
# typical AIX shared libraries.
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
- else
+ library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+ ;;
+ aix,no) # traditional AIX only
+ dynamic_linker='AIX lib.a[(]lib.so.V[)]'
# We preserve .a as extension for shared libraries through AIX4.2
# and later when we are not doing run time linking.
- library_names_spec='${libname}${release}.a $libname.a'
- soname_spec='${libname}${release}${shared_ext}$major'
- fi
+ library_names_spec='$libname$release.a $libname.a'
+ soname_spec='$libname$release$shared_ext$major'
+ ;;
+ svr4,*) # full svr4 only
+ dynamic_linker="AIX lib.so.V[(]$shared_archive_member_spec.o[)]"
+ library_names_spec='$libname$release$shared_ext$major $libname$shared_ext'
+ # We do not specify a path in Import Files, so LIBPATH fires.
+ shlibpath_overrides_runpath=yes
+ ;;
+ *,yes) # both, prefer svr4
+ dynamic_linker="AIX lib.so.V[(]$shared_archive_member_spec.o[)], lib.a[(]lib.so.V[)]"
+ library_names_spec='$libname$release$shared_ext$major $libname$shared_ext'
+ # unpreferred sharedlib libNAME.a needs extra handling
+ postinstall_cmds='test -n "$linkname" || linkname="$realname"~func_stripname "" ".so" "$linkname"~$install_shared_prog "$dir/$func_stripname_result.$libext" "$destdir/$func_stripname_result.$libext"~test -z "$tstripme" || test -z "$striplib" || $striplib "$destdir/$func_stripname_result.$libext"'
+ postuninstall_cmds='for n in $library_names $old_library; do :; done~func_stripname "" ".so" "$n"~test "$func_stripname_result" = "$n" || func_append rmfiles " $odir/$func_stripname_result.$libext"'
+ # We do not specify a path in Import Files, so LIBPATH fires.
+ shlibpath_overrides_runpath=yes
+ ;;
+ *,no) # both, prefer aix
+ dynamic_linker="AIX lib.a[(]lib.so.V[)], lib.so.V[(]$shared_archive_member_spec.o[)]"
+ library_names_spec='$libname$release.a $libname.a'
+ soname_spec='$libname$release$shared_ext$major'
+ # unpreferred sharedlib libNAME.so.V and symlink libNAME.so need extra handling
+ postinstall_cmds='test -z "$dlname" || $install_shared_prog $dir/$dlname $destdir/$dlname~test -z "$tstripme" || test -z "$striplib" || $striplib $destdir/$dlname~test -n "$linkname" || linkname=$realname~func_stripname "" ".a" "$linkname"~(cd "$destdir" && $LN_S -f $dlname $func_stripname_result.so)'
+ postuninstall_cmds='test -z "$dlname" || func_append rmfiles " $odir/$dlname"~for n in $old_library $library_names; do :; done~func_stripname "" ".a" "$n"~func_append rmfiles " $odir/$func_stripname_result.so"'
+ ;;
+ esac
shlibpath_var=LIBPATH
fi
;;
@@ -2170,27 +2490,27 @@
powerpc)
# Since July 2007 AmigaOS4 officially supports .so libraries.
# When compiling the executable, add -use-dynld -Lsobjs: to the compileline.
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+ library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
;;
m68k)
library_names_spec='$libname.ixlibrary $libname.a'
# Create ${libname}_ixlibrary.a entries in /sys/libs.
- finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`$ECHO "X$lib" | $Xsed -e '\''s%^.*/\([[^/]]*\)\.ixlibrary$%\1%'\''`; test $RM /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done'
+ finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`func_echo_all "$lib" | $SED '\''s%^.*/\([[^/]]*\)\.ixlibrary$%\1%'\''`; $RM /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done'
;;
esac
;;
beos*)
- library_names_spec='${libname}${shared_ext}'
+ library_names_spec='$libname$shared_ext'
dynamic_linker="$host_os ld.so"
shlibpath_var=LIBRARY_PATH
;;
bsdi[[45]]*)
- version_type=linux
+ version_type=linux # correct to gnu/linux during the next big refactor
need_version=no
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
+ library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+ soname_spec='$libname$release$shared_ext$major'
finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir'
shlibpath_var=LD_LIBRARY_PATH
sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib"
@@ -2202,16 +2522,17 @@
cygwin* | mingw* | pw32* | cegcc*)
version_type=windows
- shrext_cmds=".dll"
+ shrext_cmds=.dll
need_version=no
need_lib_prefix=no
- case $GCC,$host_os in
- yes,cygwin* | yes,mingw* | yes,pw32* | yes,cegcc*)
+ case $GCC,$cc_basename in
+ yes,*)
+ # gcc
library_names_spec='$libname.dll.a'
# DLL is installed to $(libdir)/../bin by postinstall_cmds
- postinstall_cmds='base_file=`basename \${file}`~
- dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i; echo \$dlname'\''`~
+ postinstall_cmds='base_file=`basename \$file`~
+ dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\$base_file'\''i; echo \$dlname'\''`~
dldir=$destdir/`dirname \$dlpath`~
test -d \$dldir || mkdir -p \$dldir~
$install_prog $dir/$dlname \$dldir/$dlname~
@@ -2227,37 +2548,84 @@
case $host_os in
cygwin*)
# Cygwin DLLs use 'cyg' prefix rather than 'lib'
- soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}'
- sys_lib_search_path_spec="/usr/lib /lib/w32api /lib /usr/local/lib"
+ soname_spec='`echo $libname | sed -e 's/^lib/cyg/'``echo $release | $SED -e 's/[[.]]/-/g'`$versuffix$shared_ext'
+m4_if([$1], [],[
+ sys_lib_search_path_spec="$sys_lib_search_path_spec /usr/lib/w32api"])
;;
mingw* | cegcc*)
# MinGW DLLs use traditional 'lib' prefix
- soname_spec='${libname}`echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}'
- sys_lib_search_path_spec=`$CC -print-search-dirs | $GREP "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"`
+ soname_spec='$libname`echo $release | $SED -e 's/[[.]]/-/g'`$versuffix$shared_ext'
+ ;;
+ pw32*)
+ # pw32 DLLs use 'pw' prefix rather than 'lib'
+ library_names_spec='`echo $libname | sed -e 's/^lib/pw/'``echo $release | $SED -e 's/[[.]]/-/g'`$versuffix$shared_ext'
+ ;;
+ esac
+ dynamic_linker='Win32 ld.exe'
+ ;;
+
+ *,cl*)
+ # Native MSVC
+ libname_spec='$name'
+ soname_spec='$libname`echo $release | $SED -e 's/[[.]]/-/g'`$versuffix$shared_ext'
+ library_names_spec='$libname.dll.lib'
+
+ case $build_os in
+ mingw*)
+ sys_lib_search_path_spec=
+ lt_save_ifs=$IFS
+ IFS=';'
+ for lt_path in $LIB
+ do
+ IFS=$lt_save_ifs
+ # Let DOS variable expansion print the short 8.3 style file name.
+ lt_path=`cd "$lt_path" 2>/dev/null && cmd //C "for %i in (".") do @echo %~si"`
+ sys_lib_search_path_spec="$sys_lib_search_path_spec $lt_path"
+ done
+ IFS=$lt_save_ifs
+ # Convert to MSYS style.
+ sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | sed -e 's|\\\\|/|g' -e 's| \\([[a-zA-Z]]\\):| /\\1|g' -e 's|^ ||'`
+ ;;
+ cygwin*)
+ # Convert to unix form, then to dos form, then back to unix form
+ # but this time dos style (no spaces!) so that the unix form looks
+ # like /cygdrive/c/PROGRA~1:/cygdr...
+ sys_lib_search_path_spec=`cygpath --path --unix "$LIB"`
+ sys_lib_search_path_spec=`cygpath --path --dos "$sys_lib_search_path_spec" 2>/dev/null`
+ sys_lib_search_path_spec=`cygpath --path --unix "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"`
+ ;;
+ *)
+ sys_lib_search_path_spec=$LIB
if $ECHO "$sys_lib_search_path_spec" | [$GREP ';[c-zC-Z]:/' >/dev/null]; then
- # It is most probably a Windows format PATH printed by
- # mingw gcc, but we are running on Cygwin. Gcc prints its search
- # path with ; separators, and with drive letters. We can handle the
- # drive letters (cygwin fileutils understands them), so leave them,
- # especially as we might pass files found there to a mingw objdump,
- # which wouldn't understand a cygwinified path. Ahh.
+ # It is most probably a Windows format PATH.
sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'`
else
- sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"`
+ sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"`
fi
+ # FIXME: find the short name or the path components, as spaces are
+ # common. (e.g. "Program Files" -> "PROGRA~1")
;;
- pw32*)
- # pw32 DLLs use 'pw' prefix rather than 'lib'
- library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}'
- ;;
esac
+
+ # DLL is installed to $(libdir)/../bin by postinstall_cmds
+ postinstall_cmds='base_file=`basename \$file`~
+ dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\$base_file'\''i; echo \$dlname'\''`~
+ dldir=$destdir/`dirname \$dlpath`~
+ test -d \$dldir || mkdir -p \$dldir~
+ $install_prog $dir/$dlname \$dldir/$dlname'
+ postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~
+ dlpath=$dir/\$dldll~
+ $RM \$dlpath'
+ shlibpath_overrides_runpath=yes
+ dynamic_linker='Win32 link.exe'
;;
*)
- library_names_spec='${libname}`echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext} $libname.lib'
+ # Assume MSVC wrapper
+ library_names_spec='$libname`echo $release | $SED -e 's/[[.]]/-/g'`$versuffix$shared_ext $libname.lib'
+ dynamic_linker='Win32 ld.exe'
;;
esac
- dynamic_linker='Win32 ld.exe'
# FIXME: first we should search . and the directory the executable is in
shlibpath_var=PATH
;;
@@ -2267,8 +2635,8 @@
version_type=darwin
need_lib_prefix=no
need_version=no
- library_names_spec='${libname}${release}${major}$shared_ext ${libname}$shared_ext'
- soname_spec='${libname}${release}${major}$shared_ext'
+ library_names_spec='$libname$release$major$shared_ext $libname$shared_ext'
+ soname_spec='$libname$release$major$shared_ext'
shlibpath_overrides_runpath=yes
shlibpath_var=DYLD_LIBRARY_PATH
shrext_cmds='`test .$module = .yes && echo .so || echo .dylib`'
@@ -2278,18 +2646,14 @@
;;
dgux*)
- version_type=linux
+ version_type=linux # correct to gnu/linux during the next big refactor
need_lib_prefix=no
need_version=no
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname$shared_ext'
- soname_spec='${libname}${release}${shared_ext}$major'
+ library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+ soname_spec='$libname$release$shared_ext$major'
shlibpath_var=LD_LIBRARY_PATH
;;
-freebsd1*)
- dynamic_linker=no
- ;;
-
freebsd* | dragonfly*)
# DragonFly does not have aout. When/if they implement a new
# versioning mechanism, adjust this.
@@ -2297,7 +2661,7 @@
objformat=`/usr/bin/objformat`
else
case $host_os in
- freebsd[[123]]*) objformat=aout ;;
+ freebsd[[23]].*) objformat=aout ;;
*) objformat=elf ;;
esac
fi
@@ -2304,18 +2668,19 @@
version_type=freebsd-$objformat
case $version_type in
freebsd-elf*)
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}'
+ library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+ soname_spec='$libname$release$shared_ext$major'
need_version=no
need_lib_prefix=no
;;
freebsd-*)
- library_names_spec='${libname}${release}${shared_ext}$versuffix $libname${shared_ext}$versuffix'
+ library_names_spec='$libname$release$shared_ext$versuffix $libname$shared_ext$versuffix'
need_version=yes
;;
esac
shlibpath_var=LD_LIBRARY_PATH
case $host_os in
- freebsd2*)
+ freebsd2.*)
shlibpath_overrides_runpath=yes
;;
freebsd3.[[01]]* | freebsdelf3.[[01]]*)
@@ -2334,13 +2699,16 @@
esac
;;
-gnu*)
- version_type=linux
+haiku*)
+ version_type=linux # correct to gnu/linux during the next big refactor
need_lib_prefix=no
need_version=no
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
- shlibpath_var=LD_LIBRARY_PATH
+ dynamic_linker="$host_os runtime_loader"
+ library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+ soname_spec='$libname$release$shared_ext$major'
+ shlibpath_var=LIBRARY_PATH
+ shlibpath_overrides_runpath=no
+ sys_lib_dlsearch_path_spec='/boot/home/config/lib /boot/common/lib /boot/system/lib'
hardcode_into_libs=yes
;;
@@ -2357,14 +2725,15 @@
dynamic_linker="$host_os dld.so"
shlibpath_var=LD_LIBRARY_PATH
shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
- if test "X$HPUX_IA64_MODE" = X32; then
+ library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+ soname_spec='$libname$release$shared_ext$major'
+ if test 32 = "$HPUX_IA64_MODE"; then
sys_lib_search_path_spec="/usr/lib/hpux32 /usr/local/lib/hpux32 /usr/local/lib"
+ sys_lib_dlsearch_path_spec=/usr/lib/hpux32
else
sys_lib_search_path_spec="/usr/lib/hpux64 /usr/local/lib/hpux64"
+ sys_lib_dlsearch_path_spec=/usr/lib/hpux64
fi
- sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
;;
hppa*64*)
shrext_cmds='.sl'
@@ -2372,8 +2741,8 @@
dynamic_linker="$host_os dld.sl"
shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH
shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
+ library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+ soname_spec='$libname$release$shared_ext$major'
sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64"
sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
;;
@@ -2382,20 +2751,22 @@
dynamic_linker="$host_os dld.sl"
shlibpath_var=SHLIB_PATH
shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
+ library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+ soname_spec='$libname$release$shared_ext$major'
;;
esac
- # HP-UX runs *really* slowly unless shared libraries are mode 555.
+ # HP-UX runs *really* slowly unless shared libraries are mode 555, ...
postinstall_cmds='chmod 555 $lib'
+ # or fails outright, so override atomically:
+ install_override_mode=555
;;
interix[[3-9]]*)
- version_type=linux
+ version_type=linux # correct to gnu/linux during the next big refactor
need_lib_prefix=no
need_version=no
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
+ library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+ soname_spec='$libname$release$shared_ext$major'
dynamic_linker='Interix 3.x ld.so.1 (PE, like ELF)'
shlibpath_var=LD_LIBRARY_PATH
shlibpath_overrides_runpath=no
@@ -2406,8 +2777,8 @@
case $host_os in
nonstopux*) version_type=nonstopux ;;
*)
- if test "$lt_cv_prog_gnu_ld" = yes; then
- version_type=linux
+ if test yes = "$lt_cv_prog_gnu_ld"; then
+ version_type=linux # correct to gnu/linux during the next big refactor
else
version_type=irix
fi ;;
@@ -2414,8 +2785,8 @@
esac
need_lib_prefix=no
need_version=no
- soname_spec='${libname}${release}${shared_ext}$major'
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext} $libname${shared_ext}'
+ soname_spec='$libname$release$shared_ext$major'
+ library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$release$shared_ext $libname$shared_ext'
case $host_os in
irix5* | nonstopux*)
libsuff= shlibsuff=
@@ -2434,8 +2805,8 @@
esac
shlibpath_var=LD_LIBRARY${shlibsuff}_PATH
shlibpath_overrides_runpath=no
- sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}"
- sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}"
+ sys_lib_search_path_spec="/usr/lib$libsuff /lib$libsuff /usr/local/lib$libsuff"
+ sys_lib_dlsearch_path_spec="/usr/lib$libsuff /lib$libsuff"
hardcode_into_libs=yes
;;
@@ -2444,26 +2815,51 @@
dynamic_linker=no
;;
-# This must be Linux ELF.
-linux* | k*bsd*-gnu)
- version_type=linux
+linux*android*)
+ version_type=none # Android doesn't support versioned libraries.
need_lib_prefix=no
need_version=no
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
+ library_names_spec='$libname$release$shared_ext'
+ soname_spec='$libname$release$shared_ext'
+ finish_cmds=
+ shlibpath_var=LD_LIBRARY_PATH
+ shlibpath_overrides_runpath=yes
+
+ # This implies no fast_install, which is unacceptable.
+ # Some rework will be needed to allow for fast_install
+ # before this can be enabled.
+ hardcode_into_libs=yes
+
+ dynamic_linker='Android linker'
+ # Don't embed -rpath directories since the linker doesn't support them.
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
+ ;;
+
+# This must be glibc/ELF.
+linux* | k*bsd*-gnu | kopensolaris*-gnu | gnu*)
+ version_type=linux # correct to gnu/linux during the next big refactor
+ need_lib_prefix=no
+ need_version=no
+ library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+ soname_spec='$libname$release$shared_ext$major'
finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir'
shlibpath_var=LD_LIBRARY_PATH
shlibpath_overrides_runpath=no
+
# Some binutils ld are patched to set DT_RUNPATH
- save_LDFLAGS=$LDFLAGS
- save_libdir=$libdir
- eval "libdir=/foo; wl=\"$_LT_TAGVAR(lt_prog_compiler_wl, $1)\"; \
- LDFLAGS=\"\$LDFLAGS $_LT_TAGVAR(hardcode_libdir_flag_spec, $1)\""
- AC_LINK_IFELSE([AC_LANG_PROGRAM([],[])],
- [AS_IF([ ($OBJDUMP -p conftest$ac_exeext) 2>/dev/null | grep "RUNPATH.*$libdir" >/dev/null],
- [shlibpath_overrides_runpath=yes])])
- LDFLAGS=$save_LDFLAGS
- libdir=$save_libdir
+ AC_CACHE_VAL([lt_cv_shlibpath_overrides_runpath],
+ [lt_cv_shlibpath_overrides_runpath=no
+ save_LDFLAGS=$LDFLAGS
+ save_libdir=$libdir
+ eval "libdir=/foo; wl=\"$_LT_TAGVAR(lt_prog_compiler_wl, $1)\"; \
+ LDFLAGS=\"\$LDFLAGS $_LT_TAGVAR(hardcode_libdir_flag_spec, $1)\""
+ AC_LINK_IFELSE([AC_LANG_PROGRAM([],[])],
+ [AS_IF([ ($OBJDUMP -p conftest$ac_exeext) 2>/dev/null | grep "RUNPATH.*$libdir" >/dev/null],
+ [lt_cv_shlibpath_overrides_runpath=yes])])
+ LDFLAGS=$save_LDFLAGS
+ libdir=$save_libdir
+ ])
+ shlibpath_overrides_runpath=$lt_cv_shlibpath_overrides_runpath
# This implies no fast_install, which is unacceptable.
# Some rework will be needed to allow for fast_install
@@ -2470,9 +2866,14 @@
# before this can be enabled.
hardcode_into_libs=yes
- # Append ld.so.conf contents to the search path
+ # Ideally, we could use ldconfig to report *all* directores which are
+ # searched for libraries, however this is still not possible. Aside from not
+ # being certain /sbin/ldconfig is available, command
+ # 'ldconfig -N -X -v | grep ^/' on 64bit Fedora does not report /usr/lib64,
+ # even though it is searched at run-time. Try to do the best guess by
+ # appending ld.so.conf contents (and includes) to the search path.
if test -f /etc/ld.so.conf; then
- lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \[$]2)); skip = 1; } { if (!skip) print \[$]0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;/^[ ]*hwcap[ ]/d;s/[:, ]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;/^$/d' | tr '\n' ' '`
+ lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \[$]2)); skip = 1; } { if (!skip) print \[$]0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;/^[ ]*hwcap[ ]/d;s/[:, ]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;s/"//g;/^$/d' | tr '\n' ' '`
sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra"
fi
@@ -2490,12 +2891,12 @@
need_lib_prefix=no
need_version=no
if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
+ library_names_spec='$libname$release$shared_ext$versuffix $libname$shared_ext$versuffix'
finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
dynamic_linker='NetBSD (a.out) ld.so'
else
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
+ library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+ soname_spec='$libname$release$shared_ext$major'
dynamic_linker='NetBSD ld.elf_so'
fi
shlibpath_var=LD_LIBRARY_PATH
@@ -2504,8 +2905,8 @@
;;
newsos6)
- version_type=linux
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+ version_type=linux # correct to gnu/linux during the next big refactor
+ library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
shlibpath_var=LD_LIBRARY_PATH
shlibpath_overrides_runpath=yes
;;
@@ -2514,8 +2915,8 @@
version_type=qnx
need_lib_prefix=no
need_version=no
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
+ library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+ soname_spec='$libname$release$shared_ext$major'
shlibpath_var=LD_LIBRARY_PATH
shlibpath_overrides_runpath=no
hardcode_into_libs=yes
@@ -2522,39 +2923,49 @@
dynamic_linker='ldqnx.so'
;;
-openbsd*)
+openbsd* | bitrig*)
version_type=sunos
- sys_lib_dlsearch_path_spec="/usr/lib"
+ sys_lib_dlsearch_path_spec=/usr/lib
need_lib_prefix=no
- # Some older versions of OpenBSD (3.3 at least) *do* need versioned libs.
- case $host_os in
- openbsd3.3 | openbsd3.3.*) need_version=yes ;;
- *) need_version=no ;;
- esac
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
+ if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`"; then
+ need_version=no
+ else
+ need_version=yes
+ fi
+ library_names_spec='$libname$release$shared_ext$versuffix $libname$shared_ext$versuffix'
finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
shlibpath_var=LD_LIBRARY_PATH
- if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
- case $host_os in
- openbsd2.[[89]] | openbsd2.[[89]].*)
- shlibpath_overrides_runpath=no
- ;;
- *)
- shlibpath_overrides_runpath=yes
- ;;
- esac
- else
- shlibpath_overrides_runpath=yes
- fi
+ shlibpath_overrides_runpath=yes
;;
os2*)
libname_spec='$name'
- shrext_cmds=".dll"
+ version_type=windows
+ shrext_cmds=.dll
+ need_version=no
need_lib_prefix=no
- library_names_spec='$libname${shared_ext} $libname.a'
+ # OS/2 can only load a DLL with a base name of 8 characters or less.
+ soname_spec='`test -n "$os2dllname" && libname="$os2dllname";
+ v=$($ECHO $release$versuffix | tr -d .-);
+ n=$($ECHO $libname | cut -b -$((8 - ${#v})) | tr . _);
+ $ECHO $n$v`$shared_ext'
+ library_names_spec='${libname}_dll.$libext'
dynamic_linker='OS/2 ld.exe'
- shlibpath_var=LIBPATH
+ shlibpath_var=BEGINLIBPATH
+ sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib"
+ sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
+ postinstall_cmds='base_file=`basename \$file`~
+ dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\$base_file'\''i; $ECHO \$dlname'\''`~
+ dldir=$destdir/`dirname \$dlpath`~
+ test -d \$dldir || mkdir -p \$dldir~
+ $install_prog $dir/$dlname \$dldir/$dlname~
+ chmod a+x \$dldir/$dlname~
+ if test -n '\''$stripme'\'' && test -n '\''$striplib'\''; then
+ eval '\''$striplib \$dldir/$dlname'\'' || exit \$?;
+ fi'
+ postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; $ECHO \$dlname'\''`~
+ dlpath=$dir/\$dldll~
+ $RM \$dlpath'
;;
osf3* | osf4* | osf5*)
@@ -2561,11 +2972,11 @@
version_type=osf
need_lib_prefix=no
need_version=no
- soname_spec='${libname}${release}${shared_ext}$major'
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+ soname_spec='$libname$release$shared_ext$major'
+ library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
shlibpath_var=LD_LIBRARY_PATH
sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib"
- sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec"
+ sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
;;
rdos*)
@@ -2573,11 +2984,11 @@
;;
solaris*)
- version_type=linux
+ version_type=linux # correct to gnu/linux during the next big refactor
need_lib_prefix=no
need_version=no
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
+ library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+ soname_spec='$libname$release$shared_ext$major'
shlibpath_var=LD_LIBRARY_PATH
shlibpath_overrides_runpath=yes
hardcode_into_libs=yes
@@ -2587,11 +2998,11 @@
sunos4*)
version_type=sunos
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
+ library_names_spec='$libname$release$shared_ext$versuffix $libname$shared_ext$versuffix'
finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir'
shlibpath_var=LD_LIBRARY_PATH
shlibpath_overrides_runpath=yes
- if test "$with_gnu_ld" = yes; then
+ if test yes = "$with_gnu_ld"; then
need_lib_prefix=no
fi
need_version=yes
@@ -2598,9 +3009,9 @@
;;
sysv4 | sysv4.3*)
- version_type=linux
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
+ version_type=linux # correct to gnu/linux during the next big refactor
+ library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+ soname_spec='$libname$release$shared_ext$major'
shlibpath_var=LD_LIBRARY_PATH
case $host_vendor in
sni)
@@ -2621,24 +3032,24 @@
;;
sysv4*MP*)
- if test -d /usr/nec ;then
- version_type=linux
- library_names_spec='$libname${shared_ext}.$versuffix $libname${shared_ext}.$major $libname${shared_ext}'
- soname_spec='$libname${shared_ext}.$major'
+ if test -d /usr/nec; then
+ version_type=linux # correct to gnu/linux during the next big refactor
+ library_names_spec='$libname$shared_ext.$versuffix $libname$shared_ext.$major $libname$shared_ext'
+ soname_spec='$libname$shared_ext.$major'
shlibpath_var=LD_LIBRARY_PATH
fi
;;
sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*)
- version_type=freebsd-elf
+ version_type=sco
need_lib_prefix=no
need_version=no
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
+ library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext $libname$shared_ext'
+ soname_spec='$libname$release$shared_ext$major'
shlibpath_var=LD_LIBRARY_PATH
shlibpath_overrides_runpath=yes
hardcode_into_libs=yes
- if test "$with_gnu_ld" = yes; then
+ if test yes = "$with_gnu_ld"; then
sys_lib_search_path_spec='/usr/local/lib /usr/gnu/lib /usr/ccs/lib /usr/lib /lib'
else
sys_lib_search_path_spec='/usr/ccs/lib /usr/lib'
@@ -2653,10 +3064,10 @@
tpf*)
# TPF is a cross-target only. Preferred cross-host = GNU/Linux.
- version_type=linux
+ version_type=linux # correct to gnu/linux during the next big refactor
need_lib_prefix=no
need_version=no
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+ library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
shlibpath_var=LD_LIBRARY_PATH
shlibpath_overrides_runpath=no
hardcode_into_libs=yes
@@ -2663,9 +3074,9 @@
;;
uts4*)
- version_type=linux
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
+ version_type=linux # correct to gnu/linux during the next big refactor
+ library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+ soname_spec='$libname$release$shared_ext$major'
shlibpath_var=LD_LIBRARY_PATH
;;
@@ -2674,20 +3085,30 @@
;;
esac
AC_MSG_RESULT([$dynamic_linker])
-test "$dynamic_linker" = no && can_build_shared=no
+test no = "$dynamic_linker" && can_build_shared=no
variables_saved_for_relink="PATH $shlibpath_var $runpath_var"
-if test "$GCC" = yes; then
+if test yes = "$GCC"; then
variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH"
fi
-if test "${lt_cv_sys_lib_search_path_spec+set}" = set; then
- sys_lib_search_path_spec="$lt_cv_sys_lib_search_path_spec"
+if test set = "${lt_cv_sys_lib_search_path_spec+set}"; then
+ sys_lib_search_path_spec=$lt_cv_sys_lib_search_path_spec
fi
-if test "${lt_cv_sys_lib_dlsearch_path_spec+set}" = set; then
- sys_lib_dlsearch_path_spec="$lt_cv_sys_lib_dlsearch_path_spec"
+
+if test set = "${lt_cv_sys_lib_dlsearch_path_spec+set}"; then
+ sys_lib_dlsearch_path_spec=$lt_cv_sys_lib_dlsearch_path_spec
fi
+# remember unaugmented sys_lib_dlsearch_path content for libtool script decls...
+configure_time_dlsearch_path=$sys_lib_dlsearch_path_spec
+
+# ... but it needs LT_SYS_LIBRARY_PATH munging for other configure-time code
+func_munge_path_list sys_lib_dlsearch_path_spec "$LT_SYS_LIBRARY_PATH"
+
+# to be used as default LT_SYS_LIBRARY_PATH value in generated libtool
+configure_time_lt_sys_library_path=$LT_SYS_LIBRARY_PATH
+
_LT_DECL([], [variables_saved_for_relink], [1],
[Variables whose values should be saved in libtool wrapper scripts and
restored at link time])
@@ -2705,6 +3126,8 @@
The last name is the one that the linker finds with -lNAME]])
_LT_DECL([], [soname_spec], [1],
[[The coded name of the library, if different from the real name]])
+_LT_DECL([], [install_override_mode], [1],
+ [Permission mode override for installation of shared libraries])
_LT_DECL([], [postinstall_cmds], [2],
[Command to use after installation of a shared archive])
_LT_DECL([], [postuninstall_cmds], [2],
@@ -2718,14 +3141,16 @@
[Whether we should hardcode library paths into libraries])
_LT_DECL([], [sys_lib_search_path_spec], [2],
[Compile-time system search path for libraries])
-_LT_DECL([], [sys_lib_dlsearch_path_spec], [2],
- [Run-time system search path for libraries])
+_LT_DECL([sys_lib_dlsearch_path_spec], [configure_time_dlsearch_path], [2],
+ [Detected run-time system search path for libraries])
+_LT_DECL([], [configure_time_lt_sys_library_path], [2],
+ [Explicit LT_SYS_LIBRARY_PATH set during ./configure time])
])# _LT_SYS_DYNAMIC_LINKER
# _LT_PATH_TOOL_PREFIX(TOOL)
# --------------------------
-# find a file program which can recognize shared library
+# find a file program that can recognize shared library
AC_DEFUN([_LT_PATH_TOOL_PREFIX],
[m4_require([_LT_DECL_EGREP])dnl
AC_MSG_CHECKING([for $1])
@@ -2732,25 +3157,25 @@
AC_CACHE_VAL(lt_cv_path_MAGIC_CMD,
[case $MAGIC_CMD in
[[\\/*] | ?:[\\/]*])
- lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path.
+ lt_cv_path_MAGIC_CMD=$MAGIC_CMD # Let the user override the test with a path.
;;
*)
- lt_save_MAGIC_CMD="$MAGIC_CMD"
- lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
+ lt_save_MAGIC_CMD=$MAGIC_CMD
+ lt_save_ifs=$IFS; IFS=$PATH_SEPARATOR
dnl $ac_dummy forces splitting on constant user-supplied paths.
dnl POSIX.2 word splitting is done only on the output of word expansions,
dnl not every word. This closes a longstanding sh security hole.
ac_dummy="m4_if([$2], , $PATH, [$2])"
for ac_dir in $ac_dummy; do
- IFS="$lt_save_ifs"
+ IFS=$lt_save_ifs
test -z "$ac_dir" && ac_dir=.
- if test -f $ac_dir/$1; then
- lt_cv_path_MAGIC_CMD="$ac_dir/$1"
+ if test -f "$ac_dir/$1"; then
+ lt_cv_path_MAGIC_CMD=$ac_dir/"$1"
if test -n "$file_magic_test_file"; then
case $deplibs_check_method in
"file_magic "*)
file_magic_regex=`expr "$deplibs_check_method" : "file_magic \(.*\)"`
- MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
+ MAGIC_CMD=$lt_cv_path_MAGIC_CMD
if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null |
$EGREP "$file_magic_regex" > /dev/null; then
:
@@ -2773,11 +3198,11 @@
break
fi
done
- IFS="$lt_save_ifs"
- MAGIC_CMD="$lt_save_MAGIC_CMD"
+ IFS=$lt_save_ifs
+ MAGIC_CMD=$lt_save_MAGIC_CMD
;;
esac])
-MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
+MAGIC_CMD=$lt_cv_path_MAGIC_CMD
if test -n "$MAGIC_CMD"; then
AC_MSG_RESULT($MAGIC_CMD)
else
@@ -2795,7 +3220,7 @@
# _LT_PATH_MAGIC
# --------------
-# find a file program which can recognize a shared library
+# find a file program that can recognize a shared library
m4_defun([_LT_PATH_MAGIC],
[_LT_PATH_TOOL_PREFIX(${ac_tool_prefix}file, /usr/bin$PATH_SEPARATOR$PATH)
if test -z "$lt_cv_path_MAGIC_CMD"; then
@@ -2817,20 +3242,21 @@
AC_REQUIRE([AC_CANONICAL_BUILD])dnl
m4_require([_LT_DECL_SED])dnl
m4_require([_LT_DECL_EGREP])dnl
+m4_require([_LT_PROG_ECHO_BACKSLASH])dnl
AC_ARG_WITH([gnu-ld],
[AS_HELP_STRING([--with-gnu-ld],
[assume the C compiler uses GNU ld @<:@default=no@:>@])],
- [test "$withval" = no || with_gnu_ld=yes],
+ [test no = "$withval" || with_gnu_ld=yes],
[with_gnu_ld=no])dnl
ac_prog=ld
-if test "$GCC" = yes; then
+if test yes = "$GCC"; then
# Check if gcc -print-prog-name=ld gives a path.
AC_MSG_CHECKING([for ld used by $CC])
case $host in
*-*-mingw*)
- # gcc leaves a trailing carriage return which upsets mingw
+ # gcc leaves a trailing carriage return, which upsets mingw
ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;;
*)
ac_prog=`($CC -print-prog-name=ld) 2>&5` ;;
@@ -2844,7 +3270,7 @@
while $ECHO "$ac_prog" | $GREP "$re_direlt" > /dev/null 2>&1; do
ac_prog=`$ECHO $ac_prog| $SED "s%$re_direlt%/%"`
done
- test -z "$LD" && LD="$ac_prog"
+ test -z "$LD" && LD=$ac_prog
;;
"")
# If it fails, then pretend we aren't using GCC.
@@ -2855,7 +3281,7 @@
with_gnu_ld=unknown
;;
esac
-elif test "$with_gnu_ld" = yes; then
+elif test yes = "$with_gnu_ld"; then
AC_MSG_CHECKING([for GNU ld])
else
AC_MSG_CHECKING([for non-GNU ld])
@@ -2862,30 +3288,30 @@
fi
AC_CACHE_VAL(lt_cv_path_LD,
[if test -z "$LD"; then
- lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
+ lt_save_ifs=$IFS; IFS=$PATH_SEPARATOR
for ac_dir in $PATH; do
- IFS="$lt_save_ifs"
+ IFS=$lt_save_ifs
test -z "$ac_dir" && ac_dir=.
if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
- lt_cv_path_LD="$ac_dir/$ac_prog"
+ lt_cv_path_LD=$ac_dir/$ac_prog
# Check to see if the program is GNU ld. I'd rather use --version,
# but apparently some variants of GNU ld only accept -v.
# Break only if it was the GNU/non-GNU ld that we prefer.
case `"$lt_cv_path_LD" -v 2>&1 </dev/null` in
*GNU* | *'with BFD'*)
- test "$with_gnu_ld" != no && break
+ test no != "$with_gnu_ld" && break
;;
*)
- test "$with_gnu_ld" != yes && break
+ test yes != "$with_gnu_ld" && break
;;
esac
fi
done
- IFS="$lt_save_ifs"
+ IFS=$lt_save_ifs
else
- lt_cv_path_LD="$LD" # Let the user override the test with a path.
+ lt_cv_path_LD=$LD # Let the user override the test with a path.
fi])
-LD="$lt_cv_path_LD"
+LD=$lt_cv_path_LD
if test -n "$LD"; then
AC_MSG_RESULT($LD)
else
@@ -2938,19 +3364,61 @@
esac
reload_cmds='$LD$reload_flag -o $output$reload_objs'
case $host_os in
+ cygwin* | mingw* | pw32* | cegcc*)
+ if test yes != "$GCC"; then
+ reload_cmds=false
+ fi
+ ;;
darwin*)
- if test "$GCC" = yes; then
- reload_cmds='$LTCC $LTCFLAGS -nostdlib ${wl}-r -o $output$reload_objs'
+ if test yes = "$GCC"; then
+ reload_cmds='$LTCC $LTCFLAGS -nostdlib $wl-r -o $output$reload_objs'
else
reload_cmds='$LD$reload_flag -o $output$reload_objs'
fi
;;
esac
-_LT_DECL([], [reload_flag], [1], [How to create reloadable object files])dnl
-_LT_DECL([], [reload_cmds], [2])dnl
+_LT_TAGDECL([], [reload_flag], [1], [How to create reloadable object files])dnl
+_LT_TAGDECL([], [reload_cmds], [2])dnl
])# _LT_CMD_RELOAD
+# _LT_PATH_DD
+# -----------
+# find a working dd
+m4_defun([_LT_PATH_DD],
+[AC_CACHE_CHECK([for a working dd], [ac_cv_path_lt_DD],
+[printf 0123456789abcdef0123456789abcdef >conftest.i
+cat conftest.i conftest.i >conftest2.i
+: ${lt_DD:=$DD}
+AC_PATH_PROGS_FEATURE_CHECK([lt_DD], [dd],
+[if "$ac_path_lt_DD" bs=32 count=1 <conftest2.i >conftest.out 2>/dev/null; then
+ cmp -s conftest.i conftest.out \
+ && ac_cv_path_lt_DD="$ac_path_lt_DD" ac_path_lt_DD_found=:
+fi])
+rm -f conftest.i conftest2.i conftest.out])
+])# _LT_PATH_DD
+
+
+# _LT_CMD_TRUNCATE
+# ----------------
+# find command to truncate a binary pipe
+m4_defun([_LT_CMD_TRUNCATE],
+[m4_require([_LT_PATH_DD])
+AC_CACHE_CHECK([how to truncate binary pipes], [lt_cv_truncate_bin],
+[printf 0123456789abcdef0123456789abcdef >conftest.i
+cat conftest.i conftest.i >conftest2.i
+lt_cv_truncate_bin=
+if "$ac_cv_path_lt_DD" bs=32 count=1 <conftest2.i >conftest.out 2>/dev/null; then
+ cmp -s conftest.i conftest.out \
+ && lt_cv_truncate_bin="$ac_cv_path_lt_DD bs=4096 count=1"
+fi
+rm -f conftest.i conftest2.i conftest.out
+test -z "$lt_cv_truncate_bin" && lt_cv_truncate_bin="$SED -e 4q"])
+_LT_DECL([lt_truncate_bin], [lt_cv_truncate_bin], [1],
+ [Command to truncate a binary pipe])
+])# _LT_CMD_TRUNCATE
+
+
# _LT_CHECK_MAGIC_METHOD
# ----------------------
# how to check for library dependencies
@@ -2966,13 +3434,13 @@
# Need to set the preceding variable on all platforms that support
# interlibrary dependencies.
# 'none' -- dependencies not supported.
-# `unknown' -- same as none, but documents that we really don't know.
+# 'unknown' -- same as none, but documents that we really don't know.
# 'pass_all' -- all dependencies passed with no checks.
# 'test_compile' -- check by making test program.
# 'file_magic [[regex]]' -- check by looking for files in library path
-# which responds to the $file_magic_cmd with a given extended regex.
-# If you have `file' or equivalent on your system and you're not sure
-# whether `pass_all' will *always* work, you probably want this one.
+# that responds to the $file_magic_cmd with a given extended regex.
+# If you have 'file' or equivalent on your system and you're not sure
+# whether 'pass_all' will *always* work, you probably want this one.
case $host_os in
aix[[4-9]]*)
@@ -3003,12 +3471,13 @@
lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL'
lt_cv_file_magic_cmd='func_win32_libid'
else
- lt_cv_deplibs_check_method='file_magic file format pei*-i386(.*architecture: i386)?'
+ # Keep this pattern in sync with the one in func_win32_libid.
+ lt_cv_deplibs_check_method='file_magic file format (pei*-i386(.*architecture: i386)?|pe-arm-wince|pe-x86-64)'
lt_cv_file_magic_cmd='$OBJDUMP -f'
fi
;;
-cegcc)
+cegcc*)
# use the weaker test based on 'objdump'. See mingw*.
lt_cv_deplibs_check_method='file_magic file format pe-arm-.*little(.*architecture: arm)?'
lt_cv_file_magic_cmd='$OBJDUMP -f'
@@ -3034,7 +3503,7 @@
fi
;;
-gnu*)
+haiku*)
lt_cv_deplibs_check_method=pass_all
;;
@@ -3046,11 +3515,11 @@
lt_cv_file_magic_test_file=/usr/lib/hpux32/libc.so
;;
hppa*64*)
- [lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF-[0-9][0-9]) shared object file - PA-RISC [0-9].[0-9]']
+ [lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF[ -][0-9][0-9])(-bit)?( [LM]SB)? shared object( file)?[, -]* PA-RISC [0-9]\.[0-9]']
lt_cv_file_magic_test_file=/usr/lib/pa20_64/libc.sl
;;
*)
- lt_cv_deplibs_check_method='file_magic (s[[0-9]][[0-9]][[0-9]]|PA-RISC[[0-9]].[[0-9]]) shared library'
+ lt_cv_deplibs_check_method='file_magic (s[[0-9]][[0-9]][[0-9]]|PA-RISC[[0-9]]\.[[0-9]]) shared library'
lt_cv_file_magic_test_file=/usr/lib/libc.sl
;;
esac
@@ -3071,8 +3540,8 @@
lt_cv_deplibs_check_method=pass_all
;;
-# This must be Linux ELF.
-linux* | k*bsd*-gnu)
+# This must be glibc/ELF.
+linux* | k*bsd*-gnu | kopensolaris*-gnu | gnu*)
lt_cv_deplibs_check_method=pass_all
;;
@@ -3094,8 +3563,8 @@
lt_cv_deplibs_check_method=pass_all
;;
-openbsd*)
- if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
+openbsd* | bitrig*)
+ if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`"; then
lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so\.[[0-9]]+\.[[0-9]]+|\.so|_pic\.a)$'
else
lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so\.[[0-9]]+\.[[0-9]]+|_pic\.a)$'
@@ -3148,8 +3617,26 @@
tpf*)
lt_cv_deplibs_check_method=pass_all
;;
+os2*)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
esac
])
+
+file_magic_glob=
+want_nocaseglob=no
+if test "$build" = "$host"; then
+ case $host_os in
+ mingw* | pw32*)
+ if ( shopt | grep nocaseglob ) >/dev/null 2>&1; then
+ want_nocaseglob=yes
+ else
+ file_magic_glob=`echo aAbBcCdDeEfFgGhHiIjJkKlLmMnNoOpPqQrRsStTuUvVwWxXyYzZ | $SED -e "s/\(..\)/s\/[[\1]]\/[[\1]]\/g;/g"`
+ fi
+ ;;
+ esac
+fi
+
file_magic_cmd=$lt_cv_file_magic_cmd
deplibs_check_method=$lt_cv_deplibs_check_method
test -z "$deplibs_check_method" && deplibs_check_method=unknown
@@ -3157,7 +3644,11 @@
_LT_DECL([], [deplibs_check_method], [1],
[Method to check whether dependent libraries are shared objects])
_LT_DECL([], [file_magic_cmd], [1],
- [Command to use when deplibs_check_method == "file_magic"])
+ [Command to use when deplibs_check_method = "file_magic"])
+_LT_DECL([], [file_magic_glob], [1],
+ [How to find potential files when deplibs_check_method = "file_magic"])
+_LT_DECL([], [want_nocaseglob], [1],
+ [Find potential files using nocaseglob when deplibs_check_method = "file_magic"])
])# _LT_CHECK_MAGIC_METHOD
@@ -3169,33 +3660,38 @@
AC_CACHE_CHECK([for BSD- or MS-compatible name lister (nm)], lt_cv_path_NM,
[if test -n "$NM"; then
# Let the user override the test.
- lt_cv_path_NM="$NM"
+ lt_cv_path_NM=$NM
else
- lt_nm_to_check="${ac_tool_prefix}nm"
+ lt_nm_to_check=${ac_tool_prefix}nm
if test -n "$ac_tool_prefix" && test "$build" = "$host"; then
lt_nm_to_check="$lt_nm_to_check nm"
fi
for lt_tmp_nm in $lt_nm_to_check; do
- lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
+ lt_save_ifs=$IFS; IFS=$PATH_SEPARATOR
for ac_dir in $PATH /usr/ccs/bin/elf /usr/ccs/bin /usr/ucb /bin; do
- IFS="$lt_save_ifs"
+ IFS=$lt_save_ifs
test -z "$ac_dir" && ac_dir=.
- tmp_nm="$ac_dir/$lt_tmp_nm"
- if test -f "$tmp_nm" || test -f "$tmp_nm$ac_exeext" ; then
+ tmp_nm=$ac_dir/$lt_tmp_nm
+ if test -f "$tmp_nm" || test -f "$tmp_nm$ac_exeext"; then
# Check to see if the nm accepts a BSD-compat flag.
- # Adding the `sed 1q' prevents false positives on HP-UX, which says:
+ # Adding the 'sed 1q' prevents false positives on HP-UX, which says:
# nm: unknown option "B" ignored
# Tru64's nm complains that /dev/null is an invalid object file
- case `"$tmp_nm" -B /dev/null 2>&1 | sed '1q'` in
- */dev/null* | *'Invalid file or object type'*)
+ # MSYS converts /dev/null to NUL, MinGW nm treats NUL as empty
+ case $build_os in
+ mingw*) lt_bad_file=conftest.nm/nofile ;;
+ *) lt_bad_file=/dev/null ;;
+ esac
+ case `"$tmp_nm" -B $lt_bad_file 2>&1 | sed '1q'` in
+ *$lt_bad_file* | *'Invalid file or object type'*)
lt_cv_path_NM="$tmp_nm -B"
- break
+ break 2
;;
*)
case `"$tmp_nm" -p /dev/null 2>&1 | sed '1q'` in
*/dev/null*)
lt_cv_path_NM="$tmp_nm -p"
- break
+ break 2
;;
*)
lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but
@@ -3206,18 +3702,30 @@
esac
fi
done
- IFS="$lt_save_ifs"
+ IFS=$lt_save_ifs
done
: ${lt_cv_path_NM=no}
fi])
-if test "$lt_cv_path_NM" != "no"; then
- NM="$lt_cv_path_NM"
+if test no != "$lt_cv_path_NM"; then
+ NM=$lt_cv_path_NM
else
# Didn't find any BSD compatible name lister, look for dumpbin.
- AC_CHECK_TOOLS(DUMPBIN, ["dumpbin -symbols" "link -dump -symbols"], :)
+ if test -n "$DUMPBIN"; then :
+ # Let the user override the test.
+ else
+ AC_CHECK_TOOLS(DUMPBIN, [dumpbin "link -dump"], :)
+ case `$DUMPBIN -symbols -headers /dev/null 2>&1 | sed '1q'` in
+ *COFF*)
+ DUMPBIN="$DUMPBIN -symbols -headers"
+ ;;
+ *)
+ DUMPBIN=:
+ ;;
+ esac
+ fi
AC_SUBST([DUMPBIN])
- if test "$DUMPBIN" != ":"; then
- NM="$DUMPBIN"
+ if test : != "$DUMPBIN"; then
+ NM=$DUMPBIN
fi
fi
test -z "$NM" && NM=nm
@@ -3227,13 +3735,13 @@
AC_CACHE_CHECK([the name lister ($NM) interface], [lt_cv_nm_interface],
[lt_cv_nm_interface="BSD nm"
echo "int some_variable = 0;" > conftest.$ac_ext
- (eval echo "\"\$as_me:__oline__: $ac_compile\"" >&AS_MESSAGE_LOG_FD)
+ (eval echo "\"\$as_me:$LINENO: $ac_compile\"" >&AS_MESSAGE_LOG_FD)
(eval "$ac_compile" 2>conftest.err)
cat conftest.err >&AS_MESSAGE_LOG_FD
- (eval echo "\"\$as_me:__oline__: $NM \\\"conftest.$ac_objext\\\"\"" >&AS_MESSAGE_LOG_FD)
+ (eval echo "\"\$as_me:$LINENO: $NM \\\"conftest.$ac_objext\\\"\"" >&AS_MESSAGE_LOG_FD)
(eval "$NM \"conftest.$ac_objext\"" 2>conftest.err > conftest.out)
cat conftest.err >&AS_MESSAGE_LOG_FD
- (eval echo "\"\$as_me:__oline__: output\"" >&AS_MESSAGE_LOG_FD)
+ (eval echo "\"\$as_me:$LINENO: output\"" >&AS_MESSAGE_LOG_FD)
cat conftest.out >&AS_MESSAGE_LOG_FD
if $GREP 'External.*some_variable' conftest.out > /dev/null; then
lt_cv_nm_interface="MS dumpbin"
@@ -3248,7 +3756,83 @@
dnl AC_DEFUN([AM_PROG_NM], [])
dnl AC_DEFUN([AC_PROG_NM], [])
+# _LT_CHECK_SHAREDLIB_FROM_LINKLIB
+# --------------------------------
+# how to determine the name of the shared library
+# associated with a specific link library.
+# -- PORTME fill in with the dynamic library characteristics
+m4_defun([_LT_CHECK_SHAREDLIB_FROM_LINKLIB],
+[m4_require([_LT_DECL_EGREP])
+m4_require([_LT_DECL_OBJDUMP])
+m4_require([_LT_DECL_DLLTOOL])
+AC_CACHE_CHECK([how to associate runtime and link libraries],
+lt_cv_sharedlib_from_linklib_cmd,
+[lt_cv_sharedlib_from_linklib_cmd='unknown'
+case $host_os in
+cygwin* | mingw* | pw32* | cegcc*)
+ # two different shell functions defined in ltmain.sh;
+ # decide which one to use based on capabilities of $DLLTOOL
+ case `$DLLTOOL --help 2>&1` in
+ *--identify-strict*)
+ lt_cv_sharedlib_from_linklib_cmd=func_cygming_dll_for_implib
+ ;;
+ *)
+ lt_cv_sharedlib_from_linklib_cmd=func_cygming_dll_for_implib_fallback
+ ;;
+ esac
+ ;;
+*)
+ # fallback: assume linklib IS sharedlib
+ lt_cv_sharedlib_from_linklib_cmd=$ECHO
+ ;;
+esac
+])
+sharedlib_from_linklib_cmd=$lt_cv_sharedlib_from_linklib_cmd
+test -z "$sharedlib_from_linklib_cmd" && sharedlib_from_linklib_cmd=$ECHO
+
+_LT_DECL([], [sharedlib_from_linklib_cmd], [1],
+ [Command to associate shared and link libraries])
+])# _LT_CHECK_SHAREDLIB_FROM_LINKLIB
+
+
+# _LT_PATH_MANIFEST_TOOL
+# ----------------------
+# locate the manifest tool
+m4_defun([_LT_PATH_MANIFEST_TOOL],
+[AC_CHECK_TOOL(MANIFEST_TOOL, mt, :)
+test -z "$MANIFEST_TOOL" && MANIFEST_TOOL=mt
+AC_CACHE_CHECK([if $MANIFEST_TOOL is a manifest tool], [lt_cv_path_mainfest_tool],
+ [lt_cv_path_mainfest_tool=no
+ echo "$as_me:$LINENO: $MANIFEST_TOOL '-?'" >&AS_MESSAGE_LOG_FD
+ $MANIFEST_TOOL '-?' 2>conftest.err > conftest.out
+ cat conftest.err >&AS_MESSAGE_LOG_FD
+ if $GREP 'Manifest Tool' conftest.out > /dev/null; then
+ lt_cv_path_mainfest_tool=yes
+ fi
+ rm -f conftest*])
+if test yes != "$lt_cv_path_mainfest_tool"; then
+ MANIFEST_TOOL=:
+fi
+_LT_DECL([], [MANIFEST_TOOL], [1], [Manifest tool])dnl
+])# _LT_PATH_MANIFEST_TOOL
+
+
+# _LT_DLL_DEF_P([FILE])
+# ---------------------
+# True iff FILE is a Windows DLL '.def' file.
+# Keep in sync with func_dll_def_p in the libtool script
+AC_DEFUN([_LT_DLL_DEF_P],
+[dnl
+ test DEF = "`$SED -n dnl
+ -e '\''s/^[[ ]]*//'\'' dnl Strip leading whitespace
+ -e '\''/^\(;.*\)*$/d'\'' dnl Delete empty lines and comments
+ -e '\''s/^\(EXPORTS\|LIBRARY\)\([[ ]].*\)*$/DEF/p'\'' dnl
+ -e q dnl Only consider the first "real" line
+ $1`" dnl
+])# _LT_DLL_DEF_P
+
+
# LT_LIB_M
# --------
# check for math library
@@ -3256,15 +3840,15 @@
[AC_REQUIRE([AC_CANONICAL_HOST])dnl
LIBM=
case $host in
-*-*-beos* | *-*-cygwin* | *-*-pw32* | *-*-darwin*)
+*-*-beos* | *-*-cegcc* | *-*-cygwin* | *-*-haiku* | *-*-pw32* | *-*-darwin*)
# These system don't have libm, or don't need it
;;
*-ncr-sysv4.3*)
- AC_CHECK_LIB(mw, _mwvalidcheckl, LIBM="-lmw")
+ AC_CHECK_LIB(mw, _mwvalidcheckl, LIBM=-lmw)
AC_CHECK_LIB(m, cos, LIBM="$LIBM -lm")
;;
*)
- AC_CHECK_LIB(m, cos, LIBM="-lm")
+ AC_CHECK_LIB(m, cos, LIBM=-lm)
;;
esac
AC_SUBST([LIBM])
@@ -3283,8 +3867,13 @@
_LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=
-if test "$GCC" = yes; then
- _LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=' -fno-builtin'
+if test yes = "$GCC"; then
+ case $cc_basename in
+ nvcc*)
+ _LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=' -Xcompiler -fno-builtin' ;;
+ *)
+ _LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=' -fno-builtin' ;;
+ esac
_LT_COMPILER_OPTION([if $compiler supports -fno-rtti -fno-exceptions],
lt_cv_prog_compiler_rtti_exceptions,
@@ -3301,6 +3890,7 @@
m4_defun([_LT_CMD_GLOBAL_SYMBOLS],
[AC_REQUIRE([AC_CANONICAL_HOST])dnl
AC_REQUIRE([AC_PROG_CC])dnl
+AC_REQUIRE([AC_PROG_AWK])dnl
AC_REQUIRE([LT_PATH_NM])dnl
AC_REQUIRE([LT_PATH_LD])dnl
m4_require([_LT_DECL_SED])dnl
@@ -3329,7 +3919,7 @@
symcode='[[ABCDGISTW]]'
;;
hpux*)
- if test "$host_cpu" = ia64; then
+ if test ia64 = "$host_cpu"; then
symcode='[[ABCDEGRST]]'
fi
;;
@@ -3362,15 +3952,45 @@
symcode='[[ABCDGIRSTW]]' ;;
esac
+if test "$lt_cv_nm_interface" = "MS dumpbin"; then
+ # Gets list of data symbols to import.
+ lt_cv_sys_global_symbol_to_import="sed -n -e 's/^I .* \(.*\)$/\1/p'"
+ # Adjust the below global symbol transforms to fixup imported variables.
+ lt_cdecl_hook=" -e 's/^I .* \(.*\)$/extern __declspec(dllimport) char \1;/p'"
+ lt_c_name_hook=" -e 's/^I .* \(.*\)$/ {\"\1\", (void *) 0},/p'"
+ lt_c_name_lib_hook="\
+ -e 's/^I .* \(lib.*\)$/ {\"\1\", (void *) 0},/p'\
+ -e 's/^I .* \(.*\)$/ {\"lib\1\", (void *) 0},/p'"
+else
+ # Disable hooks by default.
+ lt_cv_sys_global_symbol_to_import=
+ lt_cdecl_hook=
+ lt_c_name_hook=
+ lt_c_name_lib_hook=
+fi
+
# Transform an extracted symbol line into a proper C declaration.
# Some systems (esp. on ia64) link data and code symbols differently,
# so use this general approach.
-lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'"
+lt_cv_sys_global_symbol_to_cdecl="sed -n"\
+$lt_cdecl_hook\
+" -e 's/^T .* \(.*\)$/extern int \1();/p'"\
+" -e 's/^$symcode$symcode* .* \(.*\)$/extern char \1;/p'"
# Transform an extracted symbol line into symbol name and symbol address
-lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([[^ ]]*\) $/ {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* \([[^ ]]*\) \([[^ ]]*\)$/ {\"\2\", (void *) \&\2},/p'"
-lt_cv_sys_global_symbol_to_c_name_address_lib_prefix="sed -n -e 's/^: \([[^ ]]*\) $/ {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* \([[^ ]]*\) \(lib[[^ ]]*\)$/ {\"\2\", (void *) \&\2},/p' -e 's/^$symcode* \([[^ ]]*\) \([[^ ]]*\)$/ {\"lib\2\", (void *) \&\2},/p'"
+lt_cv_sys_global_symbol_to_c_name_address="sed -n"\
+$lt_c_name_hook\
+" -e 's/^: \(.*\) .*$/ {\"\1\", (void *) 0},/p'"\
+" -e 's/^$symcode$symcode* .* \(.*\)$/ {\"\1\", (void *) \&\1},/p'"
+# Transform an extracted symbol line into symbol name with lib prefix and
+# symbol address.
+lt_cv_sys_global_symbol_to_c_name_address_lib_prefix="sed -n"\
+$lt_c_name_lib_hook\
+" -e 's/^: \(.*\) .*$/ {\"\1\", (void *) 0},/p'"\
+" -e 's/^$symcode$symcode* .* \(lib.*\)$/ {\"\1\", (void *) \&\1},/p'"\
+" -e 's/^$symcode$symcode* .* \(.*\)$/ {\"lib\1\", (void *) \&\1},/p'"
+
# Handle CRLF in mingw tool chain
opt_cr=
case $build_os in
@@ -3387,24 +4007,29 @@
# Write the raw and C identifiers.
if test "$lt_cv_nm_interface" = "MS dumpbin"; then
- # Fake it for dumpbin and say T for any non-static function
- # and D for any global variable.
+ # Fake it for dumpbin and say T for any non-static function,
+ # D for any global variable and I for any imported variable.
# Also find C++ and __fastcall symbols from MSVC++,
# which start with @ or ?.
lt_cv_sys_global_symbol_pipe="$AWK ['"\
" {last_section=section; section=\$ 3};"\
+" /^COFF SYMBOL TABLE/{for(i in hide) delete hide[i]};"\
" /Section length .*#relocs.*(pick any)/{hide[last_section]=1};"\
+" /^ *Symbol name *: /{split(\$ 0,sn,\":\"); si=substr(sn[2],2)};"\
+" /^ *Type *: code/{print \"T\",si,substr(si,length(prfx))};"\
+" /^ *Type *: data/{print \"I\",si,substr(si,length(prfx))};"\
" \$ 0!~/External *\|/{next};"\
" / 0+ UNDEF /{next}; / UNDEF \([^|]\)*()/{next};"\
" {if(hide[section]) next};"\
-" {f=0}; \$ 0~/\(\).*\|/{f=1}; {printf f ? \"T \" : \"D \"};"\
-" {split(\$ 0, a, /\||\r/); split(a[2], s)};"\
-" s[1]~/^[@?]/{print s[1], s[1]; next};"\
-" s[1]~prfx {split(s[1],t,\"@\"); print t[1], substr(t[1],length(prfx))}"\
+" {f=\"D\"}; \$ 0~/\(\).*\|/{f=\"T\"};"\
+" {split(\$ 0,a,/\||\r/); split(a[2],s)};"\
+" s[1]~/^[@?]/{print f,s[1],s[1]; next};"\
+" s[1]~prfx {split(s[1],t,\"@\"); print f,t[1],substr(t[1],length(prfx))}"\
" ' prfx=^$ac_symprfx]"
else
lt_cv_sys_global_symbol_pipe="sed -n -e 's/^.*[[ ]]\($symcode$symcode*\)[[ ]][[ ]]*$ac_symprfx$sympat$opt_cr$/$symxfrm/p'"
fi
+ lt_cv_sys_global_symbol_pipe="$lt_cv_sys_global_symbol_pipe | sed '/ __gnu_lto/d'"
# Check to see that the pipe works correctly.
pipe_works=no
@@ -3426,7 +4051,7 @@
if AC_TRY_EVAL(ac_compile); then
# Now try to grab the symbols.
nlist=conftest.nm
- if AC_TRY_EVAL(NM conftest.$ac_objext \| $lt_cv_sys_global_symbol_pipe \> $nlist) && test -s "$nlist"; then
+ if AC_TRY_EVAL(NM conftest.$ac_objext \| "$lt_cv_sys_global_symbol_pipe" \> $nlist) && test -s "$nlist"; then
# Try sorting and uniquifying the output.
if sort "$nlist" | uniq > "$nlist"T; then
mv -f "$nlist"T "$nlist"
@@ -3438,6 +4063,18 @@
if $GREP ' nm_test_var$' "$nlist" >/dev/null; then
if $GREP ' nm_test_func$' "$nlist" >/dev/null; then
cat <<_LT_EOF > conftest.$ac_ext
+/* Keep this code in sync between libtool.m4, ltmain, lt_system.h, and tests. */
+#if defined _WIN32 || defined __CYGWIN__ || defined _WIN32_WCE
+/* DATA imports from DLLs on WIN32 can't be const, because runtime
+ relocations are performed -- see ld's documentation on pseudo-relocs. */
+# define LT@&t at _DLSYM_CONST
+#elif defined __osf__
+/* This system does not cope well with relocations in const data. */
+# define LT@&t at _DLSYM_CONST
+#else
+# define LT@&t at _DLSYM_CONST const
+#endif
+
#ifdef __cplusplus
extern "C" {
#endif
@@ -3449,7 +4086,7 @@
cat <<_LT_EOF >> conftest.$ac_ext
/* The mapping between symbol names and symbols. */
-const struct {
+LT@&t at _DLSYM_CONST struct {
const char *name;
void *address;
}
@@ -3457,7 +4094,7 @@
{
{ "@PROGRAM@", (void *) 0 },
_LT_EOF
- $SED "s/^$symcode$symcode* \(.*\) \(.*\)$/ {\"\2\", (void *) \&\2},/" < "$nlist" | $GREP -v main >> conftest.$ac_ext
+ $SED "s/^$symcode$symcode* .* \(.*\)$/ {\"\1\", (void *) \&\1},/" < "$nlist" | $GREP -v main >> conftest.$ac_ext
cat <<\_LT_EOF >> conftest.$ac_ext
{0, (void *) 0}
};
@@ -3475,15 +4112,15 @@
_LT_EOF
# Now try linking the two files.
mv conftest.$ac_objext conftstm.$ac_objext
- lt_save_LIBS="$LIBS"
- lt_save_CFLAGS="$CFLAGS"
- LIBS="conftstm.$ac_objext"
+ lt_globsym_save_LIBS=$LIBS
+ lt_globsym_save_CFLAGS=$CFLAGS
+ LIBS=conftstm.$ac_objext
CFLAGS="$CFLAGS$_LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)"
- if AC_TRY_EVAL(ac_link) && test -s conftest${ac_exeext}; then
+ if AC_TRY_EVAL(ac_link) && test -s conftest$ac_exeext; then
pipe_works=yes
fi
- LIBS="$lt_save_LIBS"
- CFLAGS="$lt_save_CFLAGS"
+ LIBS=$lt_globsym_save_LIBS
+ CFLAGS=$lt_globsym_save_CFLAGS
else
echo "cannot find nm_test_func in $nlist" >&AS_MESSAGE_LOG_FD
fi
@@ -3500,7 +4137,7 @@
rm -rf conftest* conftst*
# Do not use the global_symbol_pipe unless it works.
- if test "$pipe_works" = yes; then
+ if test yes = "$pipe_works"; then
break
else
lt_cv_sys_global_symbol_pipe=
@@ -3516,10 +4153,19 @@
AC_MSG_RESULT(ok)
fi
+# Response file support.
+if test "$lt_cv_nm_interface" = "MS dumpbin"; then
+ nm_file_list_spec='@'
+elif $NM --help 2>/dev/null | grep '[[@]]FILE' >/dev/null; then
+ nm_file_list_spec='@'
+fi
+
_LT_DECL([global_symbol_pipe], [lt_cv_sys_global_symbol_pipe], [1],
[Take the output of nm and produce a listing of raw symbols and C names])
_LT_DECL([global_symbol_to_cdecl], [lt_cv_sys_global_symbol_to_cdecl], [1],
[Transform the output of nm in a proper C declaration])
+_LT_DECL([global_symbol_to_import], [lt_cv_sys_global_symbol_to_import], [1],
+ [Transform the output of nm into a list of symbols to manually relocate])
_LT_DECL([global_symbol_to_c_name_address],
[lt_cv_sys_global_symbol_to_c_name_address], [1],
[Transform the output of nm in a C name address pair])
@@ -3526,6 +4172,10 @@
_LT_DECL([global_symbol_to_c_name_address_lib_prefix],
[lt_cv_sys_global_symbol_to_c_name_address_lib_prefix], [1],
[Transform the output of nm in a C name address pair when lib prefix is needed])
+_LT_DECL([nm_interface], [lt_cv_nm_interface], [1],
+ [The name lister interface])
+_LT_DECL([], [nm_file_list_spec], [1],
+ [Specify filename containing input files for $NM])
]) # _LT_CMD_GLOBAL_SYMBOLS
@@ -3537,10 +4187,9 @@
_LT_TAGVAR(lt_prog_compiler_pic, $1)=
_LT_TAGVAR(lt_prog_compiler_static, $1)=
-AC_MSG_CHECKING([for $compiler option to produce PIC])
m4_if([$1], [CXX], [
# C++ specific cases for pic, static, wl, etc.
- if test "$GXX" = yes; then
+ if test yes = "$GXX"; then
_LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
_LT_TAGVAR(lt_prog_compiler_static, $1)='-static'
@@ -3547,10 +4196,11 @@
case $host_os in
aix*)
# All AIX code is PIC.
- if test "$host_cpu" = ia64; then
+ if test ia64 = "$host_cpu"; then
# AIX 5 now supports IA64 processor
_LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
fi
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
;;
amigaos*)
@@ -3561,8 +4211,8 @@
;;
m68k)
# FIXME: we need at least 68020 code to build shared libraries, but
- # adding the `-m68020' flag to GCC prevents building anything better,
- # like `-m68040'.
+ # adding the '-m68020' flag to GCC prevents building anything better,
+ # like '-m68040'.
_LT_TAGVAR(lt_prog_compiler_pic, $1)='-m68020 -resident32 -malways-restore-a4'
;;
esac
@@ -3578,6 +4228,11 @@
# (--disable-auto-import) libraries
m4_if([$1], [GCJ], [],
[_LT_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT'])
+ case $host_os in
+ os2*)
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='$wl-static'
+ ;;
+ esac
;;
darwin* | rhapsody*)
# PIC is the default on this platform
@@ -3588,6 +4243,11 @@
# DJGPP does not support shared libraries at all
_LT_TAGVAR(lt_prog_compiler_pic, $1)=
;;
+ haiku*)
+ # PIC is the default for Haiku.
+ # The "-static" flag exists, but is broken.
+ _LT_TAGVAR(lt_prog_compiler_static, $1)=
+ ;;
interix[[3-9]]*)
# Interix 3.x gcc -fpic/-fPIC options generate broken code.
# Instead, we relocate shared libraries at runtime.
@@ -3622,7 +4282,7 @@
case $host_os in
aix[[4-9]]*)
# All AIX code is PIC.
- if test "$host_cpu" = ia64; then
+ if test ia64 = "$host_cpu"; then
# AIX 5 now supports IA64 processor
_LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
else
@@ -3637,6 +4297,12 @@
;;
esac
;;
+ mingw* | cygwin* | os2* | pw32* | cegcc*)
+ # This hack is so that the source file can tell whether it is being
+ # built for inclusion in a dll (and should export symbols for example).
+ m4_if([$1], [GCJ], [],
+ [_LT_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT'])
+ ;;
dgux*)
case $cc_basename in
ec++*)
@@ -3657,14 +4323,14 @@
case $cc_basename in
CC*)
_LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
- _LT_TAGVAR(lt_prog_compiler_static, $1)='${wl}-a ${wl}archive'
- if test "$host_cpu" != ia64; then
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='$wl-a ${wl}archive'
+ if test ia64 != "$host_cpu"; then
_LT_TAGVAR(lt_prog_compiler_pic, $1)='+Z'
fi
;;
aCC*)
_LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
- _LT_TAGVAR(lt_prog_compiler_static, $1)='${wl}-a ${wl}archive'
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='$wl-a ${wl}archive'
case $host_cpu in
hppa*64*|ia64*)
# +Z the default
@@ -3693,7 +4359,7 @@
;;
esac
;;
- linux* | k*bsd*-gnu)
+ linux* | k*bsd*-gnu | kopensolaris*-gnu | gnu*)
case $cc_basename in
KCC*)
# KAI C++ Compiler
@@ -3701,7 +4367,7 @@
_LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
;;
ecpc* )
- # old Intel C++ for x86_64 which still supported -KPIC.
+ # old Intel C++ for x86_64, which still supported -KPIC.
_LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
_LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
_LT_TAGVAR(lt_prog_compiler_static, $1)='-static'
@@ -3726,8 +4392,8 @@
_LT_TAGVAR(lt_prog_compiler_pic, $1)=
_LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
;;
- xlc* | xlC*)
- # IBM XL 8.0 on PPC
+ xlc* | xlC* | bgxl[[cC]]* | mpixl[[cC]]*)
+ # IBM XL 8.0, 9.0 on PPC and BlueGene
_LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
_LT_TAGVAR(lt_prog_compiler_pic, $1)='-qpic'
_LT_TAGVAR(lt_prog_compiler_static, $1)='-qstaticlink'
@@ -3789,7 +4455,7 @@
;;
solaris*)
case $cc_basename in
- CC*)
+ CC* | sunCC*)
# Sun C++ 4.2, 5.x and Centerline C++
_LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
_LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
@@ -3846,7 +4512,7 @@
fi
],
[
- if test "$GCC" = yes; then
+ if test yes = "$GCC"; then
_LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
_LT_TAGVAR(lt_prog_compiler_static, $1)='-static'
@@ -3853,10 +4519,11 @@
case $host_os in
aix*)
# All AIX code is PIC.
- if test "$host_cpu" = ia64; then
+ if test ia64 = "$host_cpu"; then
# AIX 5 now supports IA64 processor
_LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
fi
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
;;
amigaos*)
@@ -3867,8 +4534,8 @@
;;
m68k)
# FIXME: we need at least 68020 code to build shared libraries, but
- # adding the `-m68020' flag to GCC prevents building anything better,
- # like `-m68040'.
+ # adding the '-m68020' flag to GCC prevents building anything better,
+ # like '-m68040'.
_LT_TAGVAR(lt_prog_compiler_pic, $1)='-m68020 -resident32 -malways-restore-a4'
;;
esac
@@ -3885,6 +4552,11 @@
# (--disable-auto-import) libraries
m4_if([$1], [GCJ], [],
[_LT_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT'])
+ case $host_os in
+ os2*)
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='$wl-static'
+ ;;
+ esac
;;
darwin* | rhapsody*)
@@ -3893,6 +4565,12 @@
_LT_TAGVAR(lt_prog_compiler_pic, $1)='-fno-common'
;;
+ haiku*)
+ # PIC is the default for Haiku.
+ # The "-static" flag exists, but is broken.
+ _LT_TAGVAR(lt_prog_compiler_static, $1)=
+ ;;
+
hpux*)
# PIC is the default for 64-bit PA HP-UX, but not for 32-bit
# PA HP-UX. On IA64 HP-UX, PIC is the default but the pic flag
@@ -3935,12 +4613,21 @@
_LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
;;
esac
+
+ case $cc_basename in
+ nvcc*) # Cuda Compiler Driver 2.2
+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Xlinker '
+ if test -n "$_LT_TAGVAR(lt_prog_compiler_pic, $1)"; then
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)="-Xcompiler $_LT_TAGVAR(lt_prog_compiler_pic, $1)"
+ fi
+ ;;
+ esac
else
# PORTME Check for flag to pass linker flags through the system compiler.
case $host_os in
aix*)
_LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
- if test "$host_cpu" = ia64; then
+ if test ia64 = "$host_cpu"; then
# AIX 5 now supports IA64 processor
_LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
else
@@ -3948,11 +4635,30 @@
fi
;;
+ darwin* | rhapsody*)
+ # PIC is the default on this platform
+ # Common symbols not allowed in MH_DYLIB files
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fno-common'
+ case $cc_basename in
+ nagfor*)
+ # NAG Fortran compiler
+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,-Wl,,'
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-PIC'
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+ ;;
+ esac
+ ;;
+
mingw* | cygwin* | pw32* | os2* | cegcc*)
# This hack is so that the source file can tell whether it is being
# built for inclusion in a dll (and should export symbols for example).
m4_if([$1], [GCJ], [],
[_LT_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT'])
+ case $host_os in
+ os2*)
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='$wl-static'
+ ;;
+ esac
;;
hpux9* | hpux10* | hpux11*)
@@ -3968,7 +4674,7 @@
;;
esac
# Is there a better lt_prog_compiler_static that works with the bundled CC?
- _LT_TAGVAR(lt_prog_compiler_static, $1)='${wl}-a ${wl}archive'
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='$wl-a ${wl}archive'
;;
irix5* | irix6* | nonstopux*)
@@ -3977,9 +4683,9 @@
_LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
;;
- linux* | k*bsd*-gnu)
+ linux* | k*bsd*-gnu | kopensolaris*-gnu | gnu*)
case $cc_basename in
- # old Intel for x86_64 which still supported -KPIC.
+ # old Intel for x86_64, which still supported -KPIC.
ecc*)
_LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
_LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
@@ -3998,7 +4704,19 @@
_LT_TAGVAR(lt_prog_compiler_pic, $1)='--shared'
_LT_TAGVAR(lt_prog_compiler_static, $1)='--static'
;;
- pgcc* | pgf77* | pgf90* | pgf95*)
+ nagfor*)
+ # NAG Fortran compiler
+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,-Wl,,'
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-PIC'
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+ ;;
+ tcc*)
+ # Fabrice Bellard et al's Tiny C Compiler
+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-static'
+ ;;
+ pgcc* | pgf77* | pgf90* | pgf95* | pgfortran*)
# Portland Group compilers (*not* the Pentium gcc compiler,
# which looks to be a dead project)
_LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
@@ -4010,8 +4728,8 @@
# All Alpha code is PIC.
_LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
;;
- xl*)
- # IBM XL C 8.0/Fortran 10.1 on PPC
+ xl* | bgxl* | bgf* | mpixl*)
+ # IBM XL C 8.0/Fortran 10.1, 11.1 on PPC and BlueGene
_LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
_LT_TAGVAR(lt_prog_compiler_pic, $1)='-qpic'
_LT_TAGVAR(lt_prog_compiler_static, $1)='-qstaticlink'
@@ -4018,6 +4736,17 @@
;;
*)
case `$CC -V 2>&1 | sed 5q` in
+ *Sun\ Ceres\ Fortran* | *Sun*Fortran*\ [[1-7]].* | *Sun*Fortran*\ 8.[[0-3]]*)
+ # Sun Fortran 8.3 passes all unrecognized flags to the linker
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+ _LT_TAGVAR(lt_prog_compiler_wl, $1)=''
+ ;;
+ *Sun\ F* | *Sun*Fortran*)
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld '
+ ;;
*Sun\ C*)
# Sun C 5.9
_LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
@@ -4024,11 +4753,15 @@
_LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
_LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
;;
- *Sun\ F*)
- # Sun Fortran 8.3 passes all unrecognized flags to the linker
- _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+ *Intel*\ [[CF]]*Compiler*)
+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-static'
+ ;;
+ *Portland\ Group*)
+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fpic'
_LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
- _LT_TAGVAR(lt_prog_compiler_wl, $1)=''
;;
esac
;;
@@ -4060,7 +4793,7 @@
_LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
_LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
case $cc_basename in
- f77* | f90* | f95*)
+ f77* | f90* | f95* | sunf77* | sunf90* | sunf95*)
_LT_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld ';;
*)
_LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,';;
@@ -4080,7 +4813,7 @@
;;
sysv4*MP*)
- if test -d /usr/nec ;then
+ if test -d /usr/nec; then
_LT_TAGVAR(lt_prog_compiler_pic, $1)='-Kconform_pic'
_LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
fi
@@ -4109,7 +4842,7 @@
fi
])
case $host_os in
- # For platforms which do not support PIC, -DPIC is meaningless:
+ # For platforms that do not support PIC, -DPIC is meaningless:
*djgpp*)
_LT_TAGVAR(lt_prog_compiler_pic, $1)=
;;
@@ -4117,10 +4850,12 @@
_LT_TAGVAR(lt_prog_compiler_pic, $1)="$_LT_TAGVAR(lt_prog_compiler_pic, $1)@&t at m4_if([$1],[],[ -DPIC],[m4_if([$1],[CXX],[ -DPIC],[])])"
;;
esac
-AC_MSG_RESULT([$_LT_TAGVAR(lt_prog_compiler_pic, $1)])
-_LT_TAGDECL([wl], [lt_prog_compiler_wl], [1],
- [How to pass a linker flag through the compiler])
+AC_CACHE_CHECK([for $compiler option to produce PIC],
+ [_LT_TAGVAR(lt_cv_prog_compiler_pic, $1)],
+ [_LT_TAGVAR(lt_cv_prog_compiler_pic, $1)=$_LT_TAGVAR(lt_prog_compiler_pic, $1)])
+_LT_TAGVAR(lt_prog_compiler_pic, $1)=$_LT_TAGVAR(lt_cv_prog_compiler_pic, $1)
+
#
# Check to make sure the PIC flag actually works.
#
@@ -4138,6 +4873,8 @@
_LT_TAGDECL([pic_flag], [lt_prog_compiler_pic], [1],
[Additional compiler flags for building library objects])
+_LT_TAGDECL([wl], [lt_prog_compiler_wl], [1],
+ [How to pass a linker flag through the compiler])
#
# Check to make sure the static flag actually works.
#
@@ -4158,6 +4895,7 @@
m4_defun([_LT_LINKER_SHLIBS],
[AC_REQUIRE([LT_PATH_LD])dnl
AC_REQUIRE([LT_PATH_NM])dnl
+m4_require([_LT_PATH_MANIFEST_TOOL])dnl
m4_require([_LT_FILEUTILS_DEFAULTS])dnl
m4_require([_LT_DECL_EGREP])dnl
m4_require([_LT_DECL_SED])dnl
@@ -4166,27 +4904,41 @@
AC_MSG_CHECKING([whether the $compiler linker ($LD) supports shared libraries])
m4_if([$1], [CXX], [
_LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
+ _LT_TAGVAR(exclude_expsyms, $1)=['_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*']
case $host_os in
aix[[4-9]]*)
# If we're using GNU nm, then we don't want the "-C" option.
- # -C means demangle to AIX nm, but means don't demangle with GNU nm
+ # -C means demangle to GNU nm, but means don't demangle to AIX nm.
+ # Without the "-l" option, or with the "-B" option, AIX nm treats
+ # weak defined symbols like other global defined symbols, whereas
+ # GNU nm marks them as "W".
+ # While the 'weak' keyword is ignored in the Export File, we need
+ # it in the Import File for the 'aix-soname' feature, so we have
+ # to replace the "-B" option with "-P" for AIX nm.
if $NM -V 2>&1 | $GREP 'GNU' > /dev/null; then
- _LT_TAGVAR(export_symbols_cmds, $1)='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && ([substr](\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols'
+ _LT_TAGVAR(export_symbols_cmds, $1)='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "W")) && ([substr](\$ 3,1,1) != ".")) { if (\$ 2 == "W") { print \$ 3 " weak" } else { print \$ 3 } } }'\'' | sort -u > $export_symbols'
else
- _LT_TAGVAR(export_symbols_cmds, $1)='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && ([substr](\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols'
+ _LT_TAGVAR(export_symbols_cmds, $1)='`func_echo_all $NM | $SED -e '\''s/B\([[^B]]*\)$/P\1/'\''` -PCpgl $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "W") || (\$ 2 == "V") || (\$ 2 == "Z")) && ([substr](\$ 1,1,1) != ".")) { if ((\$ 2 == "W") || (\$ 2 == "V") || (\$ 2 == "Z")) { print \$ 1 " weak" } else { print \$ 1 } } }'\'' | sort -u > $export_symbols'
fi
;;
pw32*)
- _LT_TAGVAR(export_symbols_cmds, $1)="$ltdll_cmds"
- ;;
+ _LT_TAGVAR(export_symbols_cmds, $1)=$ltdll_cmds
+ ;;
cygwin* | mingw* | cegcc*)
- _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGRS]][[ ]]/s/.*[[ ]]\([[^ ]]*\)/\1 DATA/;/^.*[[ ]]__nm__/s/^.*[[ ]]__nm__\([[^ ]]*\)[[ ]][[^ ]]*/\1 DATA/;/^I[[ ]]/d;/^[[AITW]][[ ]]/s/.* //'\'' | sort | uniq > $export_symbols'
- ;;
+ case $cc_basename in
+ cl*)
+ _LT_TAGVAR(exclude_expsyms, $1)='_NULL_IMPORT_DESCRIPTOR|_IMPORT_DESCRIPTOR_.*'
+ ;;
+ *)
+ _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGRS]][[ ]]/s/.*[[ ]]\([[^ ]]*\)/\1 DATA/;s/^.*[[ ]]__nm__\([[^ ]]*\)[[ ]][[^ ]]*/\1 DATA/;/^I[[ ]]/d;/^[[AITW]][[ ]]/s/.* //'\'' | sort | uniq > $export_symbols'
+ _LT_TAGVAR(exclude_expsyms, $1)=['[_]+GLOBAL_OFFSET_TABLE_|[_]+GLOBAL__[FID]_.*|[_]+head_[A-Za-z0-9_]+_dll|[A-Za-z0-9_]+_dll_iname']
+ ;;
+ esac
+ ;;
*)
_LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
- ;;
+ ;;
esac
- _LT_TAGVAR(exclude_expsyms, $1)=['_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*']
], [
runpath_var=
_LT_TAGVAR(allow_undefined_flag, $1)=
@@ -4201,7 +4953,6 @@
_LT_TAGVAR(hardcode_direct, $1)=no
_LT_TAGVAR(hardcode_direct_absolute, $1)=no
_LT_TAGVAR(hardcode_libdir_flag_spec, $1)=
- _LT_TAGVAR(hardcode_libdir_flag_spec_ld, $1)=
_LT_TAGVAR(hardcode_libdir_separator, $1)=
_LT_TAGVAR(hardcode_minus_L, $1)=no
_LT_TAGVAR(hardcode_shlibpath_var, $1)=unsupported
@@ -4217,9 +4968,9 @@
# included in the symbol list
_LT_TAGVAR(include_expsyms, $1)=
# exclude_expsyms can be an extended regexp of symbols to exclude
- # it will be wrapped by ` (' and `)$', so one must not match beginning or
- # end of line. Example: `a|bc|.*d.*' will exclude the symbols `a' and `bc',
- # as well as any symbol that contains `d'.
+ # it will be wrapped by ' (' and ')$', so one must not match beginning or
+ # end of line. Example: 'a|bc|.*d.*' will exclude the symbols 'a' and 'bc',
+ # as well as any symbol that contains 'd'.
_LT_TAGVAR(exclude_expsyms, $1)=['_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*']
# Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out
# platforms (ab)use it in PIC code, but their linkers get confused if
@@ -4235,7 +4986,7 @@
# FIXME: the MSVC++ port hasn't been tested in a loooong time
# When not using gcc, we currently assume that we are using
# Microsoft Visual C++.
- if test "$GCC" != yes; then
+ if test yes != "$GCC"; then
with_gnu_ld=no
fi
;;
@@ -4243,30 +4994,57 @@
# we just hope/assume this is gcc and not c89 (= MSVC++)
with_gnu_ld=yes
;;
- openbsd*)
+ openbsd* | bitrig*)
with_gnu_ld=no
;;
esac
_LT_TAGVAR(ld_shlibs, $1)=yes
- if test "$with_gnu_ld" = yes; then
+
+ # On some targets, GNU ld is compatible enough with the native linker
+ # that we're better off using the native interface for both.
+ lt_use_gnu_ld_interface=no
+ if test yes = "$with_gnu_ld"; then
+ case $host_os in
+ aix*)
+ # The AIX port of GNU ld has always aspired to compatibility
+ # with the native linker. However, as the warning in the GNU ld
+ # block says, versions before 2.19.5* couldn't really create working
+ # shared libraries, regardless of the interface used.
+ case `$LD -v 2>&1` in
+ *\ \(GNU\ Binutils\)\ 2.19.5*) ;;
+ *\ \(GNU\ Binutils\)\ 2.[[2-9]]*) ;;
+ *\ \(GNU\ Binutils\)\ [[3-9]]*) ;;
+ *)
+ lt_use_gnu_ld_interface=yes
+ ;;
+ esac
+ ;;
+ *)
+ lt_use_gnu_ld_interface=yes
+ ;;
+ esac
+ fi
+
+ if test yes = "$lt_use_gnu_ld_interface"; then
# If archive_cmds runs LD, not CC, wlarc should be empty
- wlarc='${wl}'
+ wlarc='$wl'
# Set some defaults for GNU ld with shared library support. These
# are reset later if shared libraries are not supported. Putting them
# here allows them to be overridden if necessary.
runpath_var=LD_RUN_PATH
- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
- _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath $wl$libdir'
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl--export-dynamic'
# ancient GNU ld didn't support --whole-archive et. al.
if $LD --help 2>&1 | $GREP 'no-whole-archive' > /dev/null; then
- _LT_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
+ _LT_TAGVAR(whole_archive_flag_spec, $1)=$wlarc'--whole-archive$convenience '$wlarc'--no-whole-archive'
else
_LT_TAGVAR(whole_archive_flag_spec, $1)=
fi
supports_anon_versioning=no
- case `$LD -v 2>&1` in
+ case `$LD -v | $SED -e 's/([^)]\+)\s\+//' 2>&1` in
+ *GNU\ gold*) supports_anon_versioning=yes ;;
*\ [[01]].* | *\ 2.[[0-9]].* | *\ 2.10.*) ;; # catch versions < 2.11
*\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ...
*\ 2.11.92.0.12\ *) supports_anon_versioning=yes ;; # Mandrake 8.2 ...
@@ -4278,15 +5056,16 @@
case $host_os in
aix[[3-9]]*)
# On AIX/PPC, the GNU linker is very broken
- if test "$host_cpu" != ia64; then
+ if test ia64 != "$host_cpu"; then
_LT_TAGVAR(ld_shlibs, $1)=no
cat <<_LT_EOF 1>&2
-*** Warning: the GNU linker, at least up to release 2.9.1, is reported
+*** Warning: the GNU linker, at least up to release 2.19, is reported
*** to be unable to reliably create shared libraries on AIX.
*** Therefore, libtool is disabling shared libraries support. If you
-*** really care for shared libraries, you may want to modify your PATH
-*** so that a non-GNU linker is found, and then restart.
+*** really care for shared libraries, you may want to install binutils
+*** 2.20 or above, or modify your PATH so that a non-GNU linker is found.
+*** You will then need to restart the configuration process.
_LT_EOF
fi
@@ -4296,7 +5075,7 @@
case $host_cpu in
powerpc)
# see comment about AmigaOS4 .so support
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib'
_LT_TAGVAR(archive_expsym_cmds, $1)=''
;;
m68k)
@@ -4312,7 +5091,7 @@
_LT_TAGVAR(allow_undefined_flag, $1)=unsupported
# Joseph Beckenbach <jrb3 at best.com> says some releases of gcc
# support --undefined. This deserves some investigation. FIXME
- _LT_TAGVAR(archive_cmds, $1)='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -nostart $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib'
else
_LT_TAGVAR(ld_shlibs, $1)=no
fi
@@ -4322,32 +5101,67 @@
# _LT_TAGVAR(hardcode_libdir_flag_spec, $1) is actually meaningless,
# as there is no search path for DLLs.
_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl--export-all-symbols'
_LT_TAGVAR(allow_undefined_flag, $1)=unsupported
_LT_TAGVAR(always_export_symbols, $1)=no
_LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
- _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGRS]][[ ]]/s/.*[[ ]]\([[^ ]]*\)/\1 DATA/'\'' | $SED -e '\''/^[[AITW]][[ ]]/s/.*[[ ]]//'\'' | sort | uniq > $export_symbols'
+ _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGRS]][[ ]]/s/.*[[ ]]\([[^ ]]*\)/\1 DATA/;s/^.*[[ ]]__nm__\([[^ ]]*\)[[ ]][[^ ]]*/\1 DATA/;/^I[[ ]]/d;/^[[AITW]][[ ]]/s/.* //'\'' | sort | uniq > $export_symbols'
+ _LT_TAGVAR(exclude_expsyms, $1)=['[_]+GLOBAL_OFFSET_TABLE_|[_]+GLOBAL__[FID]_.*|[_]+head_[A-Za-z0-9_]+_dll|[A-Za-z0-9_]+_dll_iname']
if $LD --help 2>&1 | $GREP 'auto-import' > /dev/null; then
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
- # If the export-symbols file already is a .def file (1st line
- # is EXPORTS), use it as is; otherwise, prepend...
- _LT_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
- cp $export_symbols $output_objdir/$soname.def;
- else
- echo EXPORTS > $output_objdir/$soname.def;
- cat $export_symbols >> $output_objdir/$soname.def;
- fi~
- $CC -shared $output_objdir/$soname.def $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname $wl--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
+ # If the export-symbols file already is a .def file, use it as
+ # is; otherwise, prepend EXPORTS...
+ _LT_TAGVAR(archive_expsym_cmds, $1)='if _LT_DLL_DEF_P([$export_symbols]); then
+ cp $export_symbols $output_objdir/$soname.def;
+ else
+ echo EXPORTS > $output_objdir/$soname.def;
+ cat $export_symbols >> $output_objdir/$soname.def;
+ fi~
+ $CC -shared $output_objdir/$soname.def $libobjs $deplibs $compiler_flags -o $output_objdir/$soname $wl--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
else
_LT_TAGVAR(ld_shlibs, $1)=no
fi
;;
+ haiku*)
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib'
+ _LT_TAGVAR(link_all_deplibs, $1)=yes
+ ;;
+
+ os2*)
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
+ _LT_TAGVAR(hardcode_minus_L, $1)=yes
+ _LT_TAGVAR(allow_undefined_flag, $1)=unsupported
+ shrext_cmds=.dll
+ _LT_TAGVAR(archive_cmds, $1)='$ECHO "LIBRARY ${soname%$shared_ext} INITINSTANCE TERMINSTANCE" > $output_objdir/$libname.def~
+ $ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~
+ $ECHO "DATA MULTIPLE NONSHARED" >> $output_objdir/$libname.def~
+ $ECHO EXPORTS >> $output_objdir/$libname.def~
+ emxexp $libobjs | $SED /"_DLL_InitTerm"/d >> $output_objdir/$libname.def~
+ $CC -Zdll -Zcrtdll -o $output_objdir/$soname $libobjs $deplibs $compiler_flags $output_objdir/$libname.def~
+ emximp -o $lib $output_objdir/$libname.def'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$ECHO "LIBRARY ${soname%$shared_ext} INITINSTANCE TERMINSTANCE" > $output_objdir/$libname.def~
+ $ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~
+ $ECHO "DATA MULTIPLE NONSHARED" >> $output_objdir/$libname.def~
+ $ECHO EXPORTS >> $output_objdir/$libname.def~
+ prefix_cmds="$SED"~
+ if test EXPORTS = "`$SED 1q $export_symbols`"; then
+ prefix_cmds="$prefix_cmds -e 1d";
+ fi~
+ prefix_cmds="$prefix_cmds -e \"s/^\(.*\)$/_\1/g\""~
+ cat $export_symbols | $prefix_cmds >> $output_objdir/$libname.def~
+ $CC -Zdll -Zcrtdll -o $output_objdir/$soname $libobjs $deplibs $compiler_flags $output_objdir/$libname.def~
+ emximp -o $lib $output_objdir/$libname.def'
+ _LT_TAGVAR(old_archive_From_new_cmds, $1)='emximp -o $output_objdir/${libname}_dll.a $output_objdir/$libname.def'
+ _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
+ ;;
+
interix[[3-9]]*)
_LT_TAGVAR(hardcode_direct, $1)=no
_LT_TAGVAR(hardcode_shlibpath_var, $1)=no
- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
- _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath,$libdir'
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl-E'
# Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc.
# Instead, shared libraries are loaded at an image base (0x10000000 by
# default) and relocated if they conflict, which is a slow very memory
@@ -4354,29 +5168,30 @@
# consuming and fragmenting process. To avoid this, we pick a random,
# 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link
# time. Moving up from 0x10000000 also allows more sbrk(2) space.
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
- _LT_TAGVAR(archive_expsym_cmds, $1)='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-h,$soname $wl--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='sed "s|^|_|" $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-h,$soname $wl--retain-symbols-file,$output_objdir/$soname.expsym $wl--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
;;
- gnu* | linux* | tpf* | k*bsd*-gnu)
+ gnu* | linux* | tpf* | k*bsd*-gnu | kopensolaris*-gnu)
tmp_diet=no
- if test "$host_os" = linux-dietlibc; then
+ if test linux-dietlibc = "$host_os"; then
case $cc_basename in
diet\ *) tmp_diet=yes;; # linux-dietlibc with static linking (!diet-dyn)
esac
fi
if $LD --help 2>&1 | $EGREP ': supported targets:.* elf' > /dev/null \
- && test "$tmp_diet" = no
+ && test no = "$tmp_diet"
then
- tmp_addflag=
+ tmp_addflag=' $pic_flag'
tmp_sharedflag='-shared'
case $cc_basename,$host_cpu in
pgcc*) # Portland Group C compiler
- _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $ECHO \"$new_convenience\"` ${wl}--no-whole-archive'
+ _LT_TAGVAR(whole_archive_flag_spec, $1)='$wl--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` $wl--no-whole-archive'
tmp_addflag=' $pic_flag'
;;
- pgf77* | pgf90* | pgf95*) # Portland Group f77 and f90 compilers
- _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $ECHO \"$new_convenience\"` ${wl}--no-whole-archive'
+ pgf77* | pgf90* | pgf95* | pgfortran*)
+ # Portland Group f77 and f90 compilers
+ _LT_TAGVAR(whole_archive_flag_spec, $1)='$wl--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` $wl--no-whole-archive'
tmp_addflag=' $pic_flag -Mnomain' ;;
ecc*,ia64* | icc*,ia64*) # Intel C compiler on ia64
tmp_addflag=' -i_dynamic' ;;
@@ -4387,39 +5202,47 @@
lf95*) # Lahey Fortran 8.1
_LT_TAGVAR(whole_archive_flag_spec, $1)=
tmp_sharedflag='--shared' ;;
- xl[[cC]]*) # IBM XL C 8.0 on PPC (deal with xlf below)
+ nagfor*) # NAGFOR 5.3
+ tmp_sharedflag='-Wl,-shared' ;;
+ xl[[cC]]* | bgxl[[cC]]* | mpixl[[cC]]*) # IBM XL C 8.0 on PPC (deal with xlf below)
tmp_sharedflag='-qmkshrobj'
tmp_addflag= ;;
+ nvcc*) # Cuda Compiler Driver 2.2
+ _LT_TAGVAR(whole_archive_flag_spec, $1)='$wl--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` $wl--no-whole-archive'
+ _LT_TAGVAR(compiler_needs_object, $1)=yes
+ ;;
esac
case `$CC -V 2>&1 | sed 5q` in
*Sun\ C*) # Sun C 5.9
- _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; $ECHO \"$new_convenience\"` ${wl}--no-whole-archive'
+ _LT_TAGVAR(whole_archive_flag_spec, $1)='$wl--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` $wl--no-whole-archive'
_LT_TAGVAR(compiler_needs_object, $1)=yes
tmp_sharedflag='-G' ;;
*Sun\ F*) # Sun Fortran 8.3
tmp_sharedflag='-G' ;;
esac
- _LT_TAGVAR(archive_cmds, $1)='$CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+ _LT_TAGVAR(archive_cmds, $1)='$CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib'
- if test "x$supports_anon_versioning" = xyes; then
+ if test yes = "$supports_anon_versioning"; then
_LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $output_objdir/$libname.ver~
- cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
- echo "local: *; };" >> $output_objdir/$libname.ver~
- $CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib'
+ cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
+ echo "local: *; };" >> $output_objdir/$libname.ver~
+ $CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags $wl-soname $wl$soname $wl-version-script $wl$output_objdir/$libname.ver -o $lib'
fi
case $cc_basename in
- xlf*)
+ tcc*)
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='-rdynamic'
+ ;;
+ xlf* | bgf* | bgxlf* | mpixlf*)
# IBM XL Fortran 10.1 on PPC cannot create shared libs itself
_LT_TAGVAR(whole_archive_flag_spec, $1)='--whole-archive$convenience --no-whole-archive'
- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)=
- _LT_TAGVAR(hardcode_libdir_flag_spec_ld, $1)='-rpath $libdir'
- _LT_TAGVAR(archive_cmds, $1)='$LD -shared $libobjs $deplibs $compiler_flags -soname $soname -o $lib'
- if test "x$supports_anon_versioning" = xyes; then
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath $wl$libdir'
+ _LT_TAGVAR(archive_cmds, $1)='$LD -shared $libobjs $deplibs $linker_flags -soname $soname -o $lib'
+ if test yes = "$supports_anon_versioning"; then
_LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $output_objdir/$libname.ver~
- cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
- echo "local: *; };" >> $output_objdir/$libname.ver~
- $LD -shared $libobjs $deplibs $compiler_flags -soname $soname -version-script $output_objdir/$libname.ver -o $lib'
+ cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
+ echo "local: *; };" >> $output_objdir/$libname.ver~
+ $LD -shared $libobjs $deplibs $linker_flags -soname $soname -version-script $output_objdir/$libname.ver -o $lib'
fi
;;
esac
@@ -4433,8 +5256,8 @@
_LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib'
wlarc=
else
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
- _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname $wl-retain-symbols-file $wl$export_symbols -o $lib'
fi
;;
@@ -4452,8 +5275,8 @@
_LT_EOF
elif $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
- _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname $wl-retain-symbols-file $wl$export_symbols -o $lib'
else
_LT_TAGVAR(ld_shlibs, $1)=no
fi
@@ -4465,7 +5288,7 @@
_LT_TAGVAR(ld_shlibs, $1)=no
cat <<_LT_EOF 1>&2
-*** Warning: Releases of the GNU linker prior to 2.16.91.0.3 can not
+*** Warning: Releases of the GNU linker prior to 2.16.91.0.3 cannot
*** reliably create shared libraries on SCO systems. Therefore, libtool
*** is disabling shared libraries support. We urge you to upgrade GNU
*** binutils to release 2.16.91.0.3 or newer. Another option is to modify
@@ -4480,9 +5303,9 @@
# DT_RUNPATH tag from executables and libraries. But doing so
# requires that you compile everything twice, which is a pain.
if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
- _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath $wl$libdir'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags $wl-soname $wl$soname $wl-retain-symbols-file $wl$export_symbols -o $lib'
else
_LT_TAGVAR(ld_shlibs, $1)=no
fi
@@ -4499,8 +5322,8 @@
*)
if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
- _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname $wl-retain-symbols-file $wl$export_symbols -o $lib'
else
_LT_TAGVAR(ld_shlibs, $1)=no
fi
@@ -4507,7 +5330,7 @@
;;
esac
- if test "$_LT_TAGVAR(ld_shlibs, $1)" = no; then
+ if test no = "$_LT_TAGVAR(ld_shlibs, $1)"; then
runpath_var=
_LT_TAGVAR(hardcode_libdir_flag_spec, $1)=
_LT_TAGVAR(export_dynamic_flag_spec, $1)=
@@ -4523,7 +5346,7 @@
# Note: this linker hardcodes the directories in LIBPATH if there
# are no directories specified by -L.
_LT_TAGVAR(hardcode_minus_L, $1)=yes
- if test "$GCC" = yes && test -z "$lt_prog_compiler_static"; then
+ if test yes = "$GCC" && test -z "$lt_prog_compiler_static"; then
# Neither direct hardcoding nor static linking is supported with a
# broken collect2.
_LT_TAGVAR(hardcode_direct, $1)=unsupported
@@ -4531,32 +5354,57 @@
;;
aix[[4-9]]*)
- if test "$host_cpu" = ia64; then
+ if test ia64 = "$host_cpu"; then
# On IA64, the linker does run time linking by default, so we don't
# have to do anything special.
aix_use_runtimelinking=no
exp_sym_flag='-Bexport'
- no_entry_flag=""
+ no_entry_flag=
else
# If we're using GNU nm, then we don't want the "-C" option.
- # -C means demangle to AIX nm, but means don't demangle with GNU nm
+ # -C means demangle to GNU nm, but means don't demangle to AIX nm.
+ # Without the "-l" option, or with the "-B" option, AIX nm treats
+ # weak defined symbols like other global defined symbols, whereas
+ # GNU nm marks them as "W".
+ # While the 'weak' keyword is ignored in the Export File, we need
+ # it in the Import File for the 'aix-soname' feature, so we have
+ # to replace the "-B" option with "-P" for AIX nm.
if $NM -V 2>&1 | $GREP 'GNU' > /dev/null; then
- _LT_TAGVAR(export_symbols_cmds, $1)='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && ([substr](\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols'
+ _LT_TAGVAR(export_symbols_cmds, $1)='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "W")) && ([substr](\$ 3,1,1) != ".")) { if (\$ 2 == "W") { print \$ 3 " weak" } else { print \$ 3 } } }'\'' | sort -u > $export_symbols'
else
- _LT_TAGVAR(export_symbols_cmds, $1)='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && ([substr](\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols'
+ _LT_TAGVAR(export_symbols_cmds, $1)='`func_echo_all $NM | $SED -e '\''s/B\([[^B]]*\)$/P\1/'\''` -PCpgl $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "W") || (\$ 2 == "V") || (\$ 2 == "Z")) && ([substr](\$ 1,1,1) != ".")) { if ((\$ 2 == "W") || (\$ 2 == "V") || (\$ 2 == "Z")) { print \$ 1 " weak" } else { print \$ 1 } } }'\'' | sort -u > $export_symbols'
fi
aix_use_runtimelinking=no
# Test if we are trying to use run time linking or normal
# AIX style linking. If -brtl is somewhere in LDFLAGS, we
- # need to do runtime linking.
+ # have runtime linking enabled, and use it for executables.
+ # For shared libraries, we enable/disable runtime linking
+ # depending on the kind of the shared library created -
+ # when "with_aix_soname,aix_use_runtimelinking" is:
+ # "aix,no" lib.a(lib.so.V) shared, rtl:no, for executables
+ # "aix,yes" lib.so shared, rtl:yes, for executables
+ # lib.a static archive
+ # "both,no" lib.so.V(shr.o) shared, rtl:yes
+ # lib.a(lib.so.V) shared, rtl:no, for executables
+ # "both,yes" lib.so.V(shr.o) shared, rtl:yes, for executables
+ # lib.a(lib.so.V) shared, rtl:no
+ # "svr4,*" lib.so.V(shr.o) shared, rtl:yes, for executables
+ # lib.a static archive
case $host_os in aix4.[[23]]|aix4.[[23]].*|aix[[5-9]]*)
for ld_flag in $LDFLAGS; do
- if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl"); then
+ if (test x-brtl = "x$ld_flag" || test x-Wl,-brtl = "x$ld_flag"); then
aix_use_runtimelinking=yes
break
fi
done
+ if test svr4,no = "$with_aix_soname,$aix_use_runtimelinking"; then
+ # With aix-soname=svr4, we create the lib.so.V shared archives only,
+ # so we don't have lib.a shared libs to link our executables.
+ # We have to force runtime linking in this case.
+ aix_use_runtimelinking=yes
+ LDFLAGS="$LDFLAGS -Wl,-brtl"
+ fi
;;
esac
@@ -4575,13 +5423,21 @@
_LT_TAGVAR(hardcode_direct_absolute, $1)=yes
_LT_TAGVAR(hardcode_libdir_separator, $1)=':'
_LT_TAGVAR(link_all_deplibs, $1)=yes
- _LT_TAGVAR(file_list_spec, $1)='${wl}-f,'
+ _LT_TAGVAR(file_list_spec, $1)='$wl-f,'
+ case $with_aix_soname,$aix_use_runtimelinking in
+ aix,*) ;; # traditional, no import file
+ svr4,* | *,yes) # use import file
+ # The Import File defines what to hardcode.
+ _LT_TAGVAR(hardcode_direct, $1)=no
+ _LT_TAGVAR(hardcode_direct_absolute, $1)=no
+ ;;
+ esac
- if test "$GCC" = yes; then
+ if test yes = "$GCC"; then
case $host_os in aix4.[[012]]|aix4.[[012]].*)
# We only want to do this on AIX 4.2 and lower, the check
# below for broken collect2 doesn't work under 4.3+
- collect2name=`${CC} -print-prog-name=collect2`
+ collect2name=`$CC -print-prog-name=collect2`
if test -f "$collect2name" &&
strings "$collect2name" | $GREP resolve_lib_name >/dev/null
then
@@ -4600,56 +5456,80 @@
;;
esac
shared_flag='-shared'
- if test "$aix_use_runtimelinking" = yes; then
- shared_flag="$shared_flag "'${wl}-G'
+ if test yes = "$aix_use_runtimelinking"; then
+ shared_flag="$shared_flag "'$wl-G'
fi
+ # Need to ensure runtime linking is disabled for the traditional
+ # shared library, or the linker may eventually find shared libraries
+ # /with/ Import File - we do not want to mix them.
+ shared_flag_aix='-shared'
+ shared_flag_svr4='-shared $wl-G'
else
# not using gcc
- if test "$host_cpu" = ia64; then
+ if test ia64 = "$host_cpu"; then
# VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release
# chokes on -Wl,-G. The following line is correct:
shared_flag='-G'
else
- if test "$aix_use_runtimelinking" = yes; then
- shared_flag='${wl}-G'
+ if test yes = "$aix_use_runtimelinking"; then
+ shared_flag='$wl-G'
else
- shared_flag='${wl}-bM:SRE'
+ shared_flag='$wl-bM:SRE'
fi
+ shared_flag_aix='$wl-bM:SRE'
+ shared_flag_svr4='$wl-G'
fi
fi
- _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-bexpall'
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl-bexpall'
# It seems that -bexpall does not export symbols beginning with
# underscore (_), so it is better to generate a list of symbols to export.
_LT_TAGVAR(always_export_symbols, $1)=yes
- if test "$aix_use_runtimelinking" = yes; then
+ if test aix,yes = "$with_aix_soname,$aix_use_runtimelinking"; then
# Warning - without using the other runtime loading flags (-brtl),
# -berok will link without error, but may produce a broken library.
_LT_TAGVAR(allow_undefined_flag, $1)='-berok'
# Determine the default libpath from the value encoded in an
# empty executable.
- _LT_SYS_MODULE_PATH_AIX
- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath"
- _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then $ECHO "X${wl}${allow_undefined_flag}" | $Xsed; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag"
+ _LT_SYS_MODULE_PATH_AIX([$1])
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-blibpath:$libdir:'"$aix_libpath"
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -o $output_objdir/$soname $libobjs $deplibs $wl'$no_entry_flag' $compiler_flags `if test -n "$allow_undefined_flag"; then func_echo_all "$wl$allow_undefined_flag"; else :; fi` $wl'$exp_sym_flag:\$export_symbols' '$shared_flag
else
- if test "$host_cpu" = ia64; then
- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $libdir:/usr/lib:/lib'
+ if test ia64 = "$host_cpu"; then
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-R $libdir:/usr/lib:/lib'
_LT_TAGVAR(allow_undefined_flag, $1)="-z nodefs"
- _LT_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols"
+ _LT_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\$wl$no_entry_flag"' $compiler_flags $wl$allow_undefined_flag '"\$wl$exp_sym_flag:\$export_symbols"
else
# Determine the default libpath from the value encoded in an
# empty executable.
- _LT_SYS_MODULE_PATH_AIX
- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath"
+ _LT_SYS_MODULE_PATH_AIX([$1])
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-blibpath:$libdir:'"$aix_libpath"
# Warning - without using the other run time loading flags,
# -berok will link without error, but may produce a broken library.
- _LT_TAGVAR(no_undefined_flag, $1)=' ${wl}-bernotok'
- _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-berok'
- # Exported symbols can be pulled into shared objects from archives
- _LT_TAGVAR(whole_archive_flag_spec, $1)='$convenience'
+ _LT_TAGVAR(no_undefined_flag, $1)=' $wl-bernotok'
+ _LT_TAGVAR(allow_undefined_flag, $1)=' $wl-berok'
+ if test yes = "$with_gnu_ld"; then
+ # We only use this code for GNU lds that support --whole-archive.
+ _LT_TAGVAR(whole_archive_flag_spec, $1)='$wl--whole-archive$convenience $wl--no-whole-archive'
+ else
+ # Exported symbols can be pulled into shared objects from archives
+ _LT_TAGVAR(whole_archive_flag_spec, $1)='$convenience'
+ fi
_LT_TAGVAR(archive_cmds_need_lc, $1)=yes
- # This is similar to how AIX traditionally builds its shared libraries.
- _LT_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$RM -r $output_objdir/$realname.d~$MKDIR $output_objdir/$realname.d'
+ # -brtl affects multiple linker settings, -berok does not and is overridden later
+ compiler_flags_filtered='`func_echo_all "$compiler_flags " | $SED -e "s%-brtl\\([[, ]]\\)%-berok\\1%g"`'
+ if test svr4 != "$with_aix_soname"; then
+ # This is similar to how AIX traditionally builds its shared libraries.
+ _LT_TAGVAR(archive_expsym_cmds, $1)="$_LT_TAGVAR(archive_expsym_cmds, $1)"'~$CC '$shared_flag_aix' -o $output_objdir/$realname.d/$soname $libobjs $deplibs $wl-bnoentry '$compiler_flags_filtered'$wl-bE:$export_symbols$allow_undefined_flag~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$realname.d/$soname'
+ fi
+ if test aix != "$with_aix_soname"; then
+ _LT_TAGVAR(archive_expsym_cmds, $1)="$_LT_TAGVAR(archive_expsym_cmds, $1)"'~$CC '$shared_flag_svr4' -o $output_objdir/$realname.d/$shared_archive_member_spec.o $libobjs $deplibs $wl-bnoentry '$compiler_flags_filtered'$wl-bE:$export_symbols$allow_undefined_flag~$STRIP -e $output_objdir/$realname.d/$shared_archive_member_spec.o~( func_echo_all "#! $soname($shared_archive_member_spec.o)"; if test shr_64 = "$shared_archive_member_spec"; then func_echo_all "# 64"; else func_echo_all "# 32"; fi; cat $export_symbols ) > $output_objdir/$realname.d/$shared_archive_member_spec.imp~$AR $AR_FLAGS $output_objdir/$soname $output_objdir/$realname.d/$shared_archive_member_spec.o $output_objdir/$realname.d/$shared_archive_member_spec.imp'
+ else
+ # used by -dlpreopen to get the symbols
+ _LT_TAGVAR(archive_expsym_cmds, $1)="$_LT_TAGVAR(archive_expsym_cmds, $1)"'~$MV $output_objdir/$realname.d/$soname $output_objdir'
+ fi
+ _LT_TAGVAR(archive_expsym_cmds, $1)="$_LT_TAGVAR(archive_expsym_cmds, $1)"'~$RM -r $output_objdir/$realname.d'
fi
fi
;;
@@ -4658,7 +5538,7 @@
case $host_cpu in
powerpc)
# see comment about AmigaOS4 .so support
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib'
_LT_TAGVAR(archive_expsym_cmds, $1)=''
;;
m68k)
@@ -4678,20 +5558,65 @@
# Microsoft Visual C++.
# hardcode_libdir_flag_spec is actually meaningless, as there is
# no search path for DLLs.
- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)=' '
- _LT_TAGVAR(allow_undefined_flag, $1)=unsupported
- # Tell ltmain to make .lib files, not .a files.
- libext=lib
- # Tell ltmain to make .dll files, not .so files.
- shrext_cmds=".dll"
- # FIXME: Setting linknames here is a bad hack.
- _LT_TAGVAR(archive_cmds, $1)='$CC -o $lib $libobjs $compiler_flags `$ECHO "X$deplibs" | $Xsed -e '\''s/ -lc$//'\''` -link -dll~linknames='
- # The linker will automatically build a .lib file if we build a DLL.
- _LT_TAGVAR(old_archive_from_new_cmds, $1)='true'
- # FIXME: Should let the user specify the lib program.
- _LT_TAGVAR(old_archive_cmds, $1)='lib -OUT:$oldlib$oldobjs$old_deplibs'
- _LT_TAGVAR(fix_srcfile_path, $1)='`cygpath -w "$srcfile"`'
- _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
+ case $cc_basename in
+ cl*)
+ # Native MSVC
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)=' '
+ _LT_TAGVAR(allow_undefined_flag, $1)=unsupported
+ _LT_TAGVAR(always_export_symbols, $1)=yes
+ _LT_TAGVAR(file_list_spec, $1)='@'
+ # Tell ltmain to make .lib files, not .a files.
+ libext=lib
+ # Tell ltmain to make .dll files, not .so files.
+ shrext_cmds=.dll
+ # FIXME: Setting linknames here is a bad hack.
+ _LT_TAGVAR(archive_cmds, $1)='$CC -o $output_objdir/$soname $libobjs $compiler_flags $deplibs -Wl,-DLL,-IMPLIB:"$tool_output_objdir$libname.dll.lib"~linknames='
+ _LT_TAGVAR(archive_expsym_cmds, $1)='if _LT_DLL_DEF_P([$export_symbols]); then
+ cp "$export_symbols" "$output_objdir/$soname.def";
+ echo "$tool_output_objdir$soname.def" > "$output_objdir/$soname.exp";
+ else
+ $SED -e '\''s/^/-link -EXPORT:/'\'' < $export_symbols > $output_objdir/$soname.exp;
+ fi~
+ $CC -o $tool_output_objdir$soname $libobjs $compiler_flags $deplibs "@$tool_output_objdir$soname.exp" -Wl,-DLL,-IMPLIB:"$tool_output_objdir$libname.dll.lib"~
+ linknames='
+ # The linker will not automatically build a static lib if we build a DLL.
+ # _LT_TAGVAR(old_archive_from_new_cmds, $1)='true'
+ _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
+ _LT_TAGVAR(exclude_expsyms, $1)='_NULL_IMPORT_DESCRIPTOR|_IMPORT_DESCRIPTOR_.*'
+ _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGRS]][[ ]]/s/.*[[ ]]\([[^ ]]*\)/\1,DATA/'\'' | $SED -e '\''/^[[AITW]][[ ]]/s/.*[[ ]]//'\'' | sort | uniq > $export_symbols'
+ # Don't use ranlib
+ _LT_TAGVAR(old_postinstall_cmds, $1)='chmod 644 $oldlib'
+ _LT_TAGVAR(postlink_cmds, $1)='lt_outputfile="@OUTPUT@"~
+ lt_tool_outputfile="@TOOL_OUTPUT@"~
+ case $lt_outputfile in
+ *.exe|*.EXE) ;;
+ *)
+ lt_outputfile=$lt_outputfile.exe
+ lt_tool_outputfile=$lt_tool_outputfile.exe
+ ;;
+ esac~
+ if test : != "$MANIFEST_TOOL" && test -f "$lt_outputfile.manifest"; then
+ $MANIFEST_TOOL -manifest "$lt_tool_outputfile.manifest" -outputresource:"$lt_tool_outputfile" || exit 1;
+ $RM "$lt_outputfile.manifest";
+ fi'
+ ;;
+ *)
+ # Assume MSVC wrapper
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)=' '
+ _LT_TAGVAR(allow_undefined_flag, $1)=unsupported
+ # Tell ltmain to make .lib files, not .a files.
+ libext=lib
+ # Tell ltmain to make .dll files, not .so files.
+ shrext_cmds=.dll
+ # FIXME: Setting linknames here is a bad hack.
+ _LT_TAGVAR(archive_cmds, $1)='$CC -o $lib $libobjs $compiler_flags `func_echo_all "$deplibs" | $SED '\''s/ -lc$//'\''` -link -dll~linknames='
+ # The linker will automatically build a .lib file if we build a DLL.
+ _LT_TAGVAR(old_archive_from_new_cmds, $1)='true'
+ # FIXME: Should let the user specify the lib program.
+ _LT_TAGVAR(old_archive_cmds, $1)='lib -OUT:$oldlib$oldobjs$old_deplibs'
+ _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
+ ;;
+ esac
;;
darwin* | rhapsody*)
@@ -4704,10 +5629,6 @@
_LT_TAGVAR(hardcode_shlibpath_var, $1)=no
;;
- freebsd1*)
- _LT_TAGVAR(ld_shlibs, $1)=no
- ;;
-
# FreeBSD 2.2.[012] allows us to include c++rt0.o to get C++ constructor
# support. Future versions do this automatically, but an explicit c++rt0.o
# does not break anything, and helps significantly (at the cost of a little
@@ -4720,7 +5641,7 @@
;;
# Unfortunately, older versions of FreeBSD 2 do not have this feature.
- freebsd2*)
+ freebsd2.*)
_LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
_LT_TAGVAR(hardcode_direct, $1)=yes
_LT_TAGVAR(hardcode_minus_L, $1)=yes
@@ -4729,7 +5650,7 @@
# FreeBSD 3 and greater uses gcc -shared to do shared libraries.
freebsd* | dragonfly*)
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared -o $lib $libobjs $deplibs $compiler_flags'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
_LT_TAGVAR(hardcode_direct, $1)=yes
_LT_TAGVAR(hardcode_shlibpath_var, $1)=no
@@ -4736,12 +5657,12 @@
;;
hpux9*)
- if test "$GCC" = yes; then
- _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$CC -shared -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
+ if test yes = "$GCC"; then
+ _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$CC -shared $pic_flag $wl+b $wl$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test "x$output_objdir/$soname" = "x$lib" || mv $output_objdir/$soname $lib'
else
- _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
+ _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test "x$output_objdir/$soname" = "x$lib" || mv $output_objdir/$soname $lib'
fi
- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl+b $wl$libdir'
_LT_TAGVAR(hardcode_libdir_separator, $1)=:
_LT_TAGVAR(hardcode_direct, $1)=yes
@@ -4748,22 +5669,21 @@
# hardcode_minus_L: Not really in the search PATH,
# but as the default location of the library.
_LT_TAGVAR(hardcode_minus_L, $1)=yes
- _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl-E'
;;
hpux10*)
- if test "$GCC" = yes -a "$with_gnu_ld" = no; then
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
+ if test yes,no = "$GCC,$with_gnu_ld"; then
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $wl+h $wl$soname $wl+b $wl$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
else
_LT_TAGVAR(archive_cmds, $1)='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags'
fi
- if test "$with_gnu_ld" = no; then
- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
- _LT_TAGVAR(hardcode_libdir_flag_spec_ld, $1)='+b $libdir'
+ if test no = "$with_gnu_ld"; then
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl+b $wl$libdir'
_LT_TAGVAR(hardcode_libdir_separator, $1)=:
_LT_TAGVAR(hardcode_direct, $1)=yes
_LT_TAGVAR(hardcode_direct_absolute, $1)=yes
- _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl-E'
# hardcode_minus_L: Not really in the search PATH,
# but as the default location of the library.
_LT_TAGVAR(hardcode_minus_L, $1)=yes
@@ -4771,33 +5691,40 @@
;;
hpux11*)
- if test "$GCC" = yes -a "$with_gnu_ld" = no; then
+ if test yes,no = "$GCC,$with_gnu_ld"; then
case $host_cpu in
hppa*64*)
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $wl+h $wl$soname -o $lib $libobjs $deplibs $compiler_flags'
;;
ia64*)
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $wl+h $wl$soname $wl+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
;;
*)
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $wl+h $wl$soname $wl+b $wl$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
;;
esac
else
case $host_cpu in
hppa*64*)
- _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -b $wl+h $wl$soname -o $lib $libobjs $deplibs $compiler_flags'
;;
ia64*)
- _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -b $wl+h $wl$soname $wl+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
;;
*)
- _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
+ m4_if($1, [], [
+ # Older versions of the 11.00 compiler do not understand -b yet
+ # (HP92453-01 A.11.01.20 doesn't, HP92453-01 B.11.X.35175-35176.GP does)
+ _LT_LINKER_OPTION([if $CC understands -b],
+ _LT_TAGVAR(lt_cv_prog_compiler__b, $1), [-b],
+ [_LT_TAGVAR(archive_cmds, $1)='$CC -b $wl+h $wl$soname $wl+b $wl$install_libdir -o $lib $libobjs $deplibs $compiler_flags'],
+ [_LT_TAGVAR(archive_cmds, $1)='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags'])],
+ [_LT_TAGVAR(archive_cmds, $1)='$CC -b $wl+h $wl$soname $wl+b $wl$install_libdir -o $lib $libobjs $deplibs $compiler_flags'])
;;
esac
fi
- if test "$with_gnu_ld" = no; then
- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
+ if test no = "$with_gnu_ld"; then
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl+b $wl$libdir'
_LT_TAGVAR(hardcode_libdir_separator, $1)=:
case $host_cpu in
@@ -4808,7 +5735,7 @@
*)
_LT_TAGVAR(hardcode_direct, $1)=yes
_LT_TAGVAR(hardcode_direct_absolute, $1)=yes
- _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl-E'
# hardcode_minus_L: Not really in the search PATH,
# but as the default location of the library.
@@ -4819,28 +5746,53 @@
;;
irix5* | irix6* | nonstopux*)
- if test "$GCC" = yes; then
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+ if test yes = "$GCC"; then
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname `test -n "$verstring" && func_echo_all "$wl-set_version $wl$verstring"` $wl-update_registry $wl$output_objdir/so_locations -o $lib'
# Try to use the -exported_symbol ld option, if it does not
# work, assume that -exports_file does not work either and
# implicitly export all symbols.
- save_LDFLAGS="$LDFLAGS"
- LDFLAGS="$LDFLAGS -shared ${wl}-exported_symbol ${wl}foo ${wl}-update_registry ${wl}/dev/null"
- AC_LINK_IFELSE(int foo(void) {},
- _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations ${wl}-exports_file ${wl}$export_symbols -o $lib'
- )
- LDFLAGS="$save_LDFLAGS"
+ # This should be the same for all languages, so no per-tag cache variable.
+ AC_CACHE_CHECK([whether the $host_os linker accepts -exported_symbol],
+ [lt_cv_irix_exported_symbol],
+ [save_LDFLAGS=$LDFLAGS
+ LDFLAGS="$LDFLAGS -shared $wl-exported_symbol ${wl}foo $wl-update_registry $wl/dev/null"
+ AC_LINK_IFELSE(
+ [AC_LANG_SOURCE(
+ [AC_LANG_CASE([C], [[int foo (void) { return 0; }]],
+ [C++], [[int foo (void) { return 0; }]],
+ [Fortran 77], [[
+ subroutine foo
+ end]],
+ [Fortran], [[
+ subroutine foo
+ end]])])],
+ [lt_cv_irix_exported_symbol=yes],
+ [lt_cv_irix_exported_symbol=no])
+ LDFLAGS=$save_LDFLAGS])
+ if test yes = "$lt_cv_irix_exported_symbol"; then
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname `test -n "$verstring" && func_echo_all "$wl-set_version $wl$verstring"` $wl-update_registry $wl$output_objdir/so_locations $wl-exports_file $wl$export_symbols -o $lib'
+ fi
else
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib'
- _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -exports_file $export_symbols -o $lib'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry $output_objdir/so_locations -o $lib'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry $output_objdir/so_locations -exports_file $export_symbols -o $lib'
fi
_LT_TAGVAR(archive_cmds_need_lc, $1)='no'
- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath $wl$libdir'
_LT_TAGVAR(hardcode_libdir_separator, $1)=:
_LT_TAGVAR(inherit_rpath, $1)=yes
_LT_TAGVAR(link_all_deplibs, $1)=yes
;;
+ linux*)
+ case $cc_basename in
+ tcc*)
+ # Fabrice Bellard et al's Tiny C Compiler
+ _LT_TAGVAR(ld_shlibs, $1)=yes
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
+ ;;
+ esac
+ ;;
+
netbsd*)
if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then
_LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' # a.out
@@ -4855,7 +5807,7 @@
newsos6)
_LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
_LT_TAGVAR(hardcode_direct, $1)=yes
- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath $wl$libdir'
_LT_TAGVAR(hardcode_libdir_separator, $1)=:
_LT_TAGVAR(hardcode_shlibpath_var, $1)=no
;;
@@ -4863,27 +5815,19 @@
*nto* | *qnx*)
;;
- openbsd*)
+ openbsd* | bitrig*)
if test -f /usr/libexec/ld.so; then
_LT_TAGVAR(hardcode_direct, $1)=yes
_LT_TAGVAR(hardcode_shlibpath_var, $1)=no
_LT_TAGVAR(hardcode_direct_absolute, $1)=yes
- if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
+ if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`"; then
_LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
- _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-retain-symbols-file,$export_symbols'
- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
- _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags $wl-retain-symbols-file,$export_symbols'
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath,$libdir'
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl-E'
else
- case $host_os in
- openbsd[[01]].* | openbsd2.[[0-7]] | openbsd2.[[0-7]].*)
- _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
- ;;
- *)
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
- ;;
- esac
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath,$libdir'
fi
else
_LT_TAGVAR(ld_shlibs, $1)=no
@@ -4894,33 +5838,53 @@
_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
_LT_TAGVAR(hardcode_minus_L, $1)=yes
_LT_TAGVAR(allow_undefined_flag, $1)=unsupported
- _LT_TAGVAR(archive_cmds, $1)='$ECHO "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~$ECHO DATA >> $output_objdir/$libname.def~$ECHO " SINGLE NONSHARED" >> $output_objdir/$libname.def~$ECHO EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def'
- _LT_TAGVAR(old_archive_from_new_cmds, $1)='emximp -o $output_objdir/$libname.a $output_objdir/$libname.def'
+ shrext_cmds=.dll
+ _LT_TAGVAR(archive_cmds, $1)='$ECHO "LIBRARY ${soname%$shared_ext} INITINSTANCE TERMINSTANCE" > $output_objdir/$libname.def~
+ $ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~
+ $ECHO "DATA MULTIPLE NONSHARED" >> $output_objdir/$libname.def~
+ $ECHO EXPORTS >> $output_objdir/$libname.def~
+ emxexp $libobjs | $SED /"_DLL_InitTerm"/d >> $output_objdir/$libname.def~
+ $CC -Zdll -Zcrtdll -o $output_objdir/$soname $libobjs $deplibs $compiler_flags $output_objdir/$libname.def~
+ emximp -o $lib $output_objdir/$libname.def'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$ECHO "LIBRARY ${soname%$shared_ext} INITINSTANCE TERMINSTANCE" > $output_objdir/$libname.def~
+ $ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~
+ $ECHO "DATA MULTIPLE NONSHARED" >> $output_objdir/$libname.def~
+ $ECHO EXPORTS >> $output_objdir/$libname.def~
+ prefix_cmds="$SED"~
+ if test EXPORTS = "`$SED 1q $export_symbols`"; then
+ prefix_cmds="$prefix_cmds -e 1d";
+ fi~
+ prefix_cmds="$prefix_cmds -e \"s/^\(.*\)$/_\1/g\""~
+ cat $export_symbols | $prefix_cmds >> $output_objdir/$libname.def~
+ $CC -Zdll -Zcrtdll -o $output_objdir/$soname $libobjs $deplibs $compiler_flags $output_objdir/$libname.def~
+ emximp -o $lib $output_objdir/$libname.def'
+ _LT_TAGVAR(old_archive_From_new_cmds, $1)='emximp -o $output_objdir/${libname}_dll.a $output_objdir/$libname.def'
+ _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
;;
osf3*)
- if test "$GCC" = yes; then
- _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+ if test yes = "$GCC"; then
+ _LT_TAGVAR(allow_undefined_flag, $1)=' $wl-expect_unresolved $wl\*'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared$allow_undefined_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname `test -n "$verstring" && func_echo_all "$wl-set_version $wl$verstring"` $wl-update_registry $wl$output_objdir/so_locations -o $lib'
else
_LT_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*'
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared$allow_undefined_flag $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry $output_objdir/so_locations -o $lib'
fi
_LT_TAGVAR(archive_cmds_need_lc, $1)='no'
- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath $wl$libdir'
_LT_TAGVAR(hardcode_libdir_separator, $1)=:
;;
osf4* | osf5*) # as osf3* with the addition of -msym flag
- if test "$GCC" = yes; then
- _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
+ if test yes = "$GCC"; then
+ _LT_TAGVAR(allow_undefined_flag, $1)=' $wl-expect_unresolved $wl\*'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared$allow_undefined_flag $pic_flag $libobjs $deplibs $compiler_flags $wl-msym $wl-soname $wl$soname `test -n "$verstring" && func_echo_all "$wl-set_version $wl$verstring"` $wl-update_registry $wl$output_objdir/so_locations -o $lib'
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath $wl$libdir'
else
_LT_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*'
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -msym -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared$allow_undefined_flag $libobjs $deplibs $compiler_flags -msym -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry $output_objdir/so_locations -o $lib'
_LT_TAGVAR(archive_expsym_cmds, $1)='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done; printf "%s\\n" "-hidden">> $lib.exp~
- $CC -shared${allow_undefined_flag} ${wl}-input ${wl}$lib.exp $compiler_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib~$RM $lib.exp'
+ $CC -shared$allow_undefined_flag $wl-input $wl$lib.exp $compiler_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && $ECHO "-set_version $verstring"` -update_registry $output_objdir/so_locations -o $lib~$RM $lib.exp'
# Both c and cxx compiler support -rpath directly
_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir'
@@ -4931,24 +5895,24 @@
solaris*)
_LT_TAGVAR(no_undefined_flag, $1)=' -z defs'
- if test "$GCC" = yes; then
- wlarc='${wl}'
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-z ${wl}text ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
+ if test yes = "$GCC"; then
+ wlarc='$wl'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $wl-z ${wl}text $wl-h $wl$soname -o $lib $libobjs $deplibs $compiler_flags'
_LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
- $CC -shared ${wl}-z ${wl}text ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp'
+ $CC -shared $pic_flag $wl-z ${wl}text $wl-M $wl$lib.exp $wl-h $wl$soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp'
else
case `$CC -V 2>&1` in
*"Compilers 5.0"*)
wlarc=''
- _LT_TAGVAR(archive_cmds, $1)='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags'
+ _LT_TAGVAR(archive_cmds, $1)='$LD -G$allow_undefined_flag -h $soname -o $lib $libobjs $deplibs $linker_flags'
_LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
- $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$RM $lib.exp'
+ $LD -G$allow_undefined_flag -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$RM $lib.exp'
;;
*)
- wlarc='${wl}'
- _LT_TAGVAR(archive_cmds, $1)='$CC -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $compiler_flags'
+ wlarc='$wl'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -G$allow_undefined_flag -h $soname -o $lib $libobjs $deplibs $compiler_flags'
_LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
- $CC -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp'
+ $CC -G$allow_undefined_flag -M $lib.exp -h $soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp'
;;
esac
fi
@@ -4958,11 +5922,11 @@
solaris2.[[0-5]] | solaris2.[[0-5]].*) ;;
*)
# The compiler driver will combine and reorder linker options,
- # but understands `-z linker_flag'. GCC discards it without `$wl',
+ # but understands '-z linker_flag'. GCC discards it without '$wl',
# but is careful enough not to reorder.
# Supported since Solaris 2.6 (maybe 2.5.1?)
- if test "$GCC" = yes; then
- _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract'
+ if test yes = "$GCC"; then
+ _LT_TAGVAR(whole_archive_flag_spec, $1)='$wl-z ${wl}allextract$convenience $wl-z ${wl}defaultextract'
else
_LT_TAGVAR(whole_archive_flag_spec, $1)='-z allextract$convenience -z defaultextract'
fi
@@ -4972,10 +5936,10 @@
;;
sunos4*)
- if test "x$host_vendor" = xsequent; then
+ if test sequent = "$host_vendor"; then
# Use $CC to link under sequent, because it throws in some extra .o
# files that make .init and .fini sections work.
- _LT_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h $soname -o $lib $libobjs $deplibs $compiler_flags'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -G $wl-h $soname -o $lib $libobjs $deplibs $compiler_flags'
else
_LT_TAGVAR(archive_cmds, $1)='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags'
fi
@@ -5024,43 +5988,43 @@
;;
sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[[01]].[[10]]* | unixware7* | sco3.2v5.0.[[024]]*)
- _LT_TAGVAR(no_undefined_flag, $1)='${wl}-z,text'
+ _LT_TAGVAR(no_undefined_flag, $1)='$wl-z,text'
_LT_TAGVAR(archive_cmds_need_lc, $1)=no
_LT_TAGVAR(hardcode_shlibpath_var, $1)=no
runpath_var='LD_RUN_PATH'
- if test "$GCC" = yes; then
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
- _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ if test yes = "$GCC"; then
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $wl-Bexport:$export_symbols $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
else
- _LT_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
- _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -G $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G $wl-Bexport:$export_symbols $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
fi
;;
sysv5* | sco3.2v5* | sco5v6*)
- # Note: We can NOT use -z defs as we might desire, because we do not
+ # Note: We CANNOT use -z defs as we might desire, because we do not
# link with -lc, and that would cause any symbols used from libc to
# always be unresolved, which means just about no library would
# ever link correctly. If we're not using GNU ld we use -z text
# though, which does catch some bad symbols but isn't as heavy-handed
# as -z defs.
- _LT_TAGVAR(no_undefined_flag, $1)='${wl}-z,text'
- _LT_TAGVAR(allow_undefined_flag, $1)='${wl}-z,nodefs'
+ _LT_TAGVAR(no_undefined_flag, $1)='$wl-z,text'
+ _LT_TAGVAR(allow_undefined_flag, $1)='$wl-z,nodefs'
_LT_TAGVAR(archive_cmds_need_lc, $1)=no
_LT_TAGVAR(hardcode_shlibpath_var, $1)=no
- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R,$libdir'
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-R,$libdir'
_LT_TAGVAR(hardcode_libdir_separator, $1)=':'
_LT_TAGVAR(link_all_deplibs, $1)=yes
- _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-Bexport'
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl-Bexport'
runpath_var='LD_RUN_PATH'
- if test "$GCC" = yes; then
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
- _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ if test yes = "$GCC"; then
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $wl-Bexport:$export_symbols $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
else
- _LT_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
- _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -G $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G $wl-Bexport:$export_symbols $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
fi
;;
@@ -5075,10 +6039,10 @@
;;
esac
- if test x$host_vendor = xsni; then
+ if test sni = "$host_vendor"; then
case $host in
sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*)
- _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-Blargedynsym'
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl-Blargedynsym'
;;
esac
fi
@@ -5085,7 +6049,7 @@
fi
])
AC_MSG_RESULT([$_LT_TAGVAR(ld_shlibs, $1)])
-test "$_LT_TAGVAR(ld_shlibs, $1)" = no && can_build_shared=no
+test no = "$_LT_TAGVAR(ld_shlibs, $1)" && can_build_shared=no
_LT_TAGVAR(with_gnu_ld, $1)=$with_gnu_ld
@@ -5102,7 +6066,7 @@
# Assume -lc should be added
_LT_TAGVAR(archive_cmds_need_lc, $1)=yes
- if test "$enable_shared" = yes && test "$GCC" = yes; then
+ if test yes,yes = "$GCC,$enable_shared"; then
case $_LT_TAGVAR(archive_cmds, $1) in
*'~'*)
# FIXME: we may have to deal with multi-command sequences.
@@ -5111,36 +6075,38 @@
# Test whether the compiler implicitly links with -lc since on some
# systems, -lgcc has to come before -lc. If gcc already passes -lc
# to ld, don't add -lc before -lgcc.
- AC_MSG_CHECKING([whether -lc should be explicitly linked in])
- $RM conftest*
- echo "$lt_simple_compile_test_code" > conftest.$ac_ext
+ AC_CACHE_CHECK([whether -lc should be explicitly linked in],
+ [lt_cv_]_LT_TAGVAR(archive_cmds_need_lc, $1),
+ [$RM conftest*
+ echo "$lt_simple_compile_test_code" > conftest.$ac_ext
- if AC_TRY_EVAL(ac_compile) 2>conftest.err; then
- soname=conftest
- lib=conftest
- libobjs=conftest.$ac_objext
- deplibs=
- wl=$_LT_TAGVAR(lt_prog_compiler_wl, $1)
- pic_flag=$_LT_TAGVAR(lt_prog_compiler_pic, $1)
- compiler_flags=-v
- linker_flags=-v
- verstring=
- output_objdir=.
- libname=conftest
- lt_save_allow_undefined_flag=$_LT_TAGVAR(allow_undefined_flag, $1)
- _LT_TAGVAR(allow_undefined_flag, $1)=
- if AC_TRY_EVAL(_LT_TAGVAR(archive_cmds, $1) 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1)
- then
- _LT_TAGVAR(archive_cmds_need_lc, $1)=no
- else
- _LT_TAGVAR(archive_cmds_need_lc, $1)=yes
- fi
- _LT_TAGVAR(allow_undefined_flag, $1)=$lt_save_allow_undefined_flag
- else
- cat conftest.err 1>&5
- fi
- $RM conftest*
- AC_MSG_RESULT([$_LT_TAGVAR(archive_cmds_need_lc, $1)])
+ if AC_TRY_EVAL(ac_compile) 2>conftest.err; then
+ soname=conftest
+ lib=conftest
+ libobjs=conftest.$ac_objext
+ deplibs=
+ wl=$_LT_TAGVAR(lt_prog_compiler_wl, $1)
+ pic_flag=$_LT_TAGVAR(lt_prog_compiler_pic, $1)
+ compiler_flags=-v
+ linker_flags=-v
+ verstring=
+ output_objdir=.
+ libname=conftest
+ lt_save_allow_undefined_flag=$_LT_TAGVAR(allow_undefined_flag, $1)
+ _LT_TAGVAR(allow_undefined_flag, $1)=
+ if AC_TRY_EVAL(_LT_TAGVAR(archive_cmds, $1) 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1)
+ then
+ lt_cv_[]_LT_TAGVAR(archive_cmds_need_lc, $1)=no
+ else
+ lt_cv_[]_LT_TAGVAR(archive_cmds_need_lc, $1)=yes
+ fi
+ _LT_TAGVAR(allow_undefined_flag, $1)=$lt_save_allow_undefined_flag
+ else
+ cat conftest.err 1>&5
+ fi
+ $RM conftest*
+ ])
+ _LT_TAGVAR(archive_cmds_need_lc, $1)=$lt_cv_[]_LT_TAGVAR(archive_cmds_need_lc, $1)
;;
esac
fi
@@ -5177,18 +6143,15 @@
_LT_TAGDECL([], [hardcode_libdir_flag_spec], [1],
[Flag to hardcode $libdir into a binary during linking.
This must work even if $libdir does not exist])
-_LT_TAGDECL([], [hardcode_libdir_flag_spec_ld], [1],
- [[If ld is used when linking, flag to hardcode $libdir into a binary
- during linking. This must work even if $libdir does not exist]])
_LT_TAGDECL([], [hardcode_libdir_separator], [1],
[Whether we need a single "-rpath" flag with a separated argument])
_LT_TAGDECL([], [hardcode_direct], [0],
- [Set to "yes" if using DIR/libNAME${shared_ext} during linking hardcodes
+ [Set to "yes" if using DIR/libNAME$shared_ext during linking hardcodes
DIR into the resulting binary])
_LT_TAGDECL([], [hardcode_direct_absolute], [0],
- [Set to "yes" if using DIR/libNAME${shared_ext} during linking hardcodes
+ [Set to "yes" if using DIR/libNAME$shared_ext during linking hardcodes
DIR into the resulting binary and the resulting library dependency is
- "absolute", i.e impossible to change by setting ${shlibpath_var} if the
+ "absolute", i.e impossible to change by setting $shlibpath_var if the
library is relocated])
_LT_TAGDECL([], [hardcode_minus_L], [0],
[Set to "yes" if using the -LDIR flag during linking hardcodes DIR
@@ -5205,8 +6168,6 @@
to runtime path list])
_LT_TAGDECL([], [link_all_deplibs], [0],
[Whether libtool must link a program against all its dependency libraries])
-_LT_TAGDECL([], [fix_srcfile_path], [1],
- [Fix the shell variable $srcfile for the compiler])
_LT_TAGDECL([], [always_export_symbols], [0],
[Set to "yes" if exported symbols are required])
_LT_TAGDECL([], [export_symbols_cmds], [2],
@@ -5217,6 +6178,8 @@
[Symbols that must always be exported])
_LT_TAGDECL([], [prelink_cmds], [2],
[Commands necessary for linking programs (against libraries) with templates])
+_LT_TAGDECL([], [postlink_cmds], [2],
+ [Commands necessary for finishing linking programs])
_LT_TAGDECL([], [file_list_spec], [1],
[Specify filename containing input files])
dnl FIXME: Not yet implemented
@@ -5229,10 +6192,10 @@
# ------------------------
# Ensure that the configuration variables for a C compiler are suitably
# defined. These variables are subsequently used by _LT_CONFIG to write
-# the compiler configuration to `libtool'.
+# the compiler configuration to 'libtool'.
m4_defun([_LT_LANG_C_CONFIG],
[m4_require([_LT_DECL_EGREP])dnl
-lt_save_CC="$CC"
+lt_save_CC=$CC
AC_LANG_PUSH(C)
# Source file extension for C test sources.
@@ -5272,18 +6235,18 @@
LT_SYS_DLOPEN_SELF
_LT_CMD_STRIPLIB
- # Report which library types will actually be built
+ # Report what library types will actually be built
AC_MSG_CHECKING([if libtool supports shared libraries])
AC_MSG_RESULT([$can_build_shared])
AC_MSG_CHECKING([whether to build shared libraries])
- test "$can_build_shared" = "no" && enable_shared=no
+ test no = "$can_build_shared" && enable_shared=no
# On AIX, shared libraries and static libraries use the same namespace, and
# are all built from PIC.
case $host_os in
aix3*)
- test "$enable_shared" = yes && enable_static=no
+ test yes = "$enable_shared" && enable_static=no
if test -n "$RANLIB"; then
archive_cmds="$archive_cmds~\$RANLIB \$lib"
postinstall_cmds='$RANLIB $lib'
@@ -5291,8 +6254,12 @@
;;
aix[[4-9]]*)
- if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then
- test "$enable_shared" = yes && enable_static=no
+ if test ia64 != "$host_cpu"; then
+ case $enable_shared,$with_aix_soname,$aix_use_runtimelinking in
+ yes,aix,yes) ;; # shared object as lib.so file only
+ yes,svr4,*) ;; # shared object as lib.so archive member only
+ yes,*) enable_static=no ;; # shared object in lib.a archive as well
+ esac
fi
;;
esac
@@ -5300,47 +6267,32 @@
AC_MSG_CHECKING([whether to build static libraries])
# Make sure either enable_shared or enable_static is yes.
- test "$enable_shared" = yes || enable_static=yes
+ test yes = "$enable_shared" || enable_static=yes
AC_MSG_RESULT([$enable_static])
_LT_CONFIG($1)
fi
AC_LANG_POP
-CC="$lt_save_CC"
+CC=$lt_save_CC
])# _LT_LANG_C_CONFIG
-# _LT_PROG_CXX
-# ------------
-# Since AC_PROG_CXX is broken, in that it returns g++ if there is no c++
-# compiler, we have our own version here.
-m4_defun([_LT_PROG_CXX],
-[
-pushdef([AC_MSG_ERROR], [_lt_caught_CXX_error=yes])
-AC_PROG_CXX
-if test -n "$CXX" && ( test "X$CXX" != "Xno" &&
- ( (test "X$CXX" = "Xg++" && `g++ -v >/dev/null 2>&1` ) ||
- (test "X$CXX" != "Xg++"))) ; then
- AC_PROG_CXXCPP
-else
- _lt_caught_CXX_error=yes
-fi
-popdef([AC_MSG_ERROR])
-])# _LT_PROG_CXX
-
-dnl aclocal-1.4 backwards compatibility:
-dnl AC_DEFUN([_LT_PROG_CXX], [])
-
-
# _LT_LANG_CXX_CONFIG([TAG])
# --------------------------
# Ensure that the configuration variables for a C++ compiler are suitably
# defined. These variables are subsequently used by _LT_CONFIG to write
-# the compiler configuration to `libtool'.
+# the compiler configuration to 'libtool'.
m4_defun([_LT_LANG_CXX_CONFIG],
-[AC_REQUIRE([_LT_PROG_CXX])dnl
-m4_require([_LT_FILEUTILS_DEFAULTS])dnl
+[m4_require([_LT_FILEUTILS_DEFAULTS])dnl
m4_require([_LT_DECL_EGREP])dnl
+m4_require([_LT_PATH_MANIFEST_TOOL])dnl
+if test -n "$CXX" && ( test no != "$CXX" &&
+ ( (test g++ = "$CXX" && `g++ -v >/dev/null 2>&1` ) ||
+ (test g++ != "$CXX"))); then
+ AC_PROG_CXXCPP
+else
+ _lt_caught_CXX_error=yes
+fi
AC_LANG_PUSH(C++)
_LT_TAGVAR(archive_cmds_need_lc, $1)=no
@@ -5352,7 +6304,6 @@
_LT_TAGVAR(hardcode_direct, $1)=no
_LT_TAGVAR(hardcode_direct_absolute, $1)=no
_LT_TAGVAR(hardcode_libdir_flag_spec, $1)=
-_LT_TAGVAR(hardcode_libdir_flag_spec_ld, $1)=
_LT_TAGVAR(hardcode_libdir_separator, $1)=
_LT_TAGVAR(hardcode_minus_L, $1)=no
_LT_TAGVAR(hardcode_shlibpath_var, $1)=unsupported
@@ -5362,6 +6313,8 @@
_LT_TAGVAR(module_expsym_cmds, $1)=
_LT_TAGVAR(link_all_deplibs, $1)=unknown
_LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds
+_LT_TAGVAR(reload_flag, $1)=$reload_flag
+_LT_TAGVAR(reload_cmds, $1)=$reload_cmds
_LT_TAGVAR(no_undefined_flag, $1)=
_LT_TAGVAR(whole_archive_flag_spec, $1)=
_LT_TAGVAR(enable_shared_with_static_runtimes, $1)=no
@@ -5377,7 +6330,7 @@
# the CXX compiler isn't working. Some variables (like enable_shared)
# are currently assumed to apply to all compilers on this platform,
# and will be corrupted by setting them based on a non-working compiler.
-if test "$_lt_caught_CXX_error" != yes; then
+if test yes != "$_lt_caught_CXX_error"; then
# Code to be used in simple compile tests
lt_simple_compile_test_code="int some_variable = 0;"
@@ -5393,6 +6346,7 @@
# Allow CC to be a program name with arguments.
lt_save_CC=$CC
+ lt_save_CFLAGS=$CFLAGS
lt_save_LD=$LD
lt_save_GCC=$GCC
GCC=$GXX
@@ -5410,6 +6364,7 @@
fi
test -z "${LDCXX+set}" || LD=$LDCXX
CC=${CXX-"c++"}
+ CFLAGS=$CXXFLAGS
compiler=$CC
_LT_TAGVAR(compiler, $1)=$CC
_LT_CC_BASENAME([$compiler])
@@ -5417,13 +6372,13 @@
if test -n "$compiler"; then
# We don't want -fno-exception when compiling C++ code, so set the
# no_builtin_flag separately
- if test "$GXX" = yes; then
+ if test yes = "$GXX"; then
_LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=' -fno-builtin'
else
_LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=
fi
- if test "$GXX" = yes; then
+ if test yes = "$GXX"; then
# Set up default GNU C++ configuration
LT_PATH_LD
@@ -5430,22 +6385,22 @@
# Check if GNU C++ uses GNU ld as the underlying linker, since the
# archiving commands below assume that GNU ld is being used.
- if test "$with_gnu_ld" = yes; then
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib'
- _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+ if test yes = "$with_gnu_ld"; then
+ _LT_TAGVAR(archive_cmds, $1)='$CC $pic_flag -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-soname $wl$soname -o $lib'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC $pic_flag -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-soname $wl$soname $wl-retain-symbols-file $wl$export_symbols -o $lib'
- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
- _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath $wl$libdir'
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl--export-dynamic'
# If archive_cmds runs LD, not CC, wlarc should be empty
# XXX I think wlarc can be eliminated in ltcf-cxx, but I need to
# investigate it a little bit more. (MM)
- wlarc='${wl}'
+ wlarc='$wl'
# ancient GNU ld didn't support --whole-archive et. al.
if eval "`$CC -print-prog-name=ld` --help 2>&1" |
$GREP 'no-whole-archive' > /dev/null; then
- _LT_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
+ _LT_TAGVAR(whole_archive_flag_spec, $1)=$wlarc'--whole-archive$convenience '$wlarc'--no-whole-archive'
else
_LT_TAGVAR(whole_archive_flag_spec, $1)=
fi
@@ -5464,7 +6419,7 @@
# Commands to make compiler produce verbose output that lists
# what "hidden" libraries, object files and flags are used when
# linking a shared library.
- output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "\-L"'
+ output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP -v "^Configured with:" | $GREP "\-L"'
else
GXX=no
@@ -5481,18 +6436,30 @@
_LT_TAGVAR(ld_shlibs, $1)=no
;;
aix[[4-9]]*)
- if test "$host_cpu" = ia64; then
+ if test ia64 = "$host_cpu"; then
# On IA64, the linker does run time linking by default, so we don't
# have to do anything special.
aix_use_runtimelinking=no
exp_sym_flag='-Bexport'
- no_entry_flag=""
+ no_entry_flag=
else
aix_use_runtimelinking=no
# Test if we are trying to use run time linking or normal
# AIX style linking. If -brtl is somewhere in LDFLAGS, we
- # need to do runtime linking.
+ # have runtime linking enabled, and use it for executables.
+ # For shared libraries, we enable/disable runtime linking
+ # depending on the kind of the shared library created -
+ # when "with_aix_soname,aix_use_runtimelinking" is:
+ # "aix,no" lib.a(lib.so.V) shared, rtl:no, for executables
+ # "aix,yes" lib.so shared, rtl:yes, for executables
+ # lib.a static archive
+ # "both,no" lib.so.V(shr.o) shared, rtl:yes
+ # lib.a(lib.so.V) shared, rtl:no, for executables
+ # "both,yes" lib.so.V(shr.o) shared, rtl:yes, for executables
+ # lib.a(lib.so.V) shared, rtl:no
+ # "svr4,*" lib.so.V(shr.o) shared, rtl:yes, for executables
+ # lib.a static archive
case $host_os in aix4.[[23]]|aix4.[[23]].*|aix[[5-9]]*)
for ld_flag in $LDFLAGS; do
case $ld_flag in
@@ -5502,6 +6469,13 @@
;;
esac
done
+ if test svr4,no = "$with_aix_soname,$aix_use_runtimelinking"; then
+ # With aix-soname=svr4, we create the lib.so.V shared archives only,
+ # so we don't have lib.a shared libs to link our executables.
+ # We have to force runtime linking in this case.
+ aix_use_runtimelinking=yes
+ LDFLAGS="$LDFLAGS -Wl,-brtl"
+ fi
;;
esac
@@ -5520,13 +6494,21 @@
_LT_TAGVAR(hardcode_direct_absolute, $1)=yes
_LT_TAGVAR(hardcode_libdir_separator, $1)=':'
_LT_TAGVAR(link_all_deplibs, $1)=yes
- _LT_TAGVAR(file_list_spec, $1)='${wl}-f,'
+ _LT_TAGVAR(file_list_spec, $1)='$wl-f,'
+ case $with_aix_soname,$aix_use_runtimelinking in
+ aix,*) ;; # no import file
+ svr4,* | *,yes) # use import file
+ # The Import File defines what to hardcode.
+ _LT_TAGVAR(hardcode_direct, $1)=no
+ _LT_TAGVAR(hardcode_direct_absolute, $1)=no
+ ;;
+ esac
- if test "$GXX" = yes; then
+ if test yes = "$GXX"; then
case $host_os in aix4.[[012]]|aix4.[[012]].*)
# We only want to do this on AIX 4.2 and lower, the check
# below for broken collect2 doesn't work under 4.3+
- collect2name=`${CC} -print-prog-name=collect2`
+ collect2name=`$CC -print-prog-name=collect2`
if test -f "$collect2name" &&
strings "$collect2name" | $GREP resolve_lib_name >/dev/null
then
@@ -5544,59 +6526,84 @@
fi
esac
shared_flag='-shared'
- if test "$aix_use_runtimelinking" = yes; then
- shared_flag="$shared_flag "'${wl}-G'
+ if test yes = "$aix_use_runtimelinking"; then
+ shared_flag=$shared_flag' $wl-G'
fi
+ # Need to ensure runtime linking is disabled for the traditional
+ # shared library, or the linker may eventually find shared libraries
+ # /with/ Import File - we do not want to mix them.
+ shared_flag_aix='-shared'
+ shared_flag_svr4='-shared $wl-G'
else
# not using gcc
- if test "$host_cpu" = ia64; then
+ if test ia64 = "$host_cpu"; then
# VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release
# chokes on -Wl,-G. The following line is correct:
shared_flag='-G'
else
- if test "$aix_use_runtimelinking" = yes; then
- shared_flag='${wl}-G'
+ if test yes = "$aix_use_runtimelinking"; then
+ shared_flag='$wl-G'
else
- shared_flag='${wl}-bM:SRE'
+ shared_flag='$wl-bM:SRE'
fi
+ shared_flag_aix='$wl-bM:SRE'
+ shared_flag_svr4='$wl-G'
fi
fi
- _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-bexpall'
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl-bexpall'
# It seems that -bexpall does not export symbols beginning with
# underscore (_), so it is better to generate a list of symbols to
# export.
_LT_TAGVAR(always_export_symbols, $1)=yes
- if test "$aix_use_runtimelinking" = yes; then
+ if test aix,yes = "$with_aix_soname,$aix_use_runtimelinking"; then
# Warning - without using the other runtime loading flags (-brtl),
# -berok will link without error, but may produce a broken library.
- _LT_TAGVAR(allow_undefined_flag, $1)='-berok'
+ # The "-G" linker flag allows undefined symbols.
+ _LT_TAGVAR(no_undefined_flag, $1)='-bernotok'
# Determine the default libpath from the value encoded in an empty
# executable.
- _LT_SYS_MODULE_PATH_AIX
- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath"
+ _LT_SYS_MODULE_PATH_AIX([$1])
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-blibpath:$libdir:'"$aix_libpath"
- _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then $ECHO "X${wl}${allow_undefined_flag}" | $Xsed; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag"
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -o $output_objdir/$soname $libobjs $deplibs $wl'$no_entry_flag' $compiler_flags `if test -n "$allow_undefined_flag"; then func_echo_all "$wl$allow_undefined_flag"; else :; fi` $wl'$exp_sym_flag:\$export_symbols' '$shared_flag
else
- if test "$host_cpu" = ia64; then
- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $libdir:/usr/lib:/lib'
+ if test ia64 = "$host_cpu"; then
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-R $libdir:/usr/lib:/lib'
_LT_TAGVAR(allow_undefined_flag, $1)="-z nodefs"
- _LT_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols"
+ _LT_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\$wl$no_entry_flag"' $compiler_flags $wl$allow_undefined_flag '"\$wl$exp_sym_flag:\$export_symbols"
else
# Determine the default libpath from the value encoded in an
# empty executable.
- _LT_SYS_MODULE_PATH_AIX
- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath"
+ _LT_SYS_MODULE_PATH_AIX([$1])
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-blibpath:$libdir:'"$aix_libpath"
# Warning - without using the other run time loading flags,
# -berok will link without error, but may produce a broken library.
- _LT_TAGVAR(no_undefined_flag, $1)=' ${wl}-bernotok'
- _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-berok'
- # Exported symbols can be pulled into shared objects from archives
- _LT_TAGVAR(whole_archive_flag_spec, $1)='$convenience'
+ _LT_TAGVAR(no_undefined_flag, $1)=' $wl-bernotok'
+ _LT_TAGVAR(allow_undefined_flag, $1)=' $wl-berok'
+ if test yes = "$with_gnu_ld"; then
+ # We only use this code for GNU lds that support --whole-archive.
+ _LT_TAGVAR(whole_archive_flag_spec, $1)='$wl--whole-archive$convenience $wl--no-whole-archive'
+ else
+ # Exported symbols can be pulled into shared objects from archives
+ _LT_TAGVAR(whole_archive_flag_spec, $1)='$convenience'
+ fi
_LT_TAGVAR(archive_cmds_need_lc, $1)=yes
- # This is similar to how AIX traditionally builds its shared
- # libraries.
- _LT_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$RM -r $output_objdir/$realname.d~$MKDIR $output_objdir/$realname.d'
+ # -brtl affects multiple linker settings, -berok does not and is overridden later
+ compiler_flags_filtered='`func_echo_all "$compiler_flags " | $SED -e "s%-brtl\\([[, ]]\\)%-berok\\1%g"`'
+ if test svr4 != "$with_aix_soname"; then
+ # This is similar to how AIX traditionally builds its shared
+ # libraries. Need -bnortl late, we may have -brtl in LDFLAGS.
+ _LT_TAGVAR(archive_expsym_cmds, $1)="$_LT_TAGVAR(archive_expsym_cmds, $1)"'~$CC '$shared_flag_aix' -o $output_objdir/$realname.d/$soname $libobjs $deplibs $wl-bnoentry '$compiler_flags_filtered'$wl-bE:$export_symbols$allow_undefined_flag~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$realname.d/$soname'
+ fi
+ if test aix != "$with_aix_soname"; then
+ _LT_TAGVAR(archive_expsym_cmds, $1)="$_LT_TAGVAR(archive_expsym_cmds, $1)"'~$CC '$shared_flag_svr4' -o $output_objdir/$realname.d/$shared_archive_member_spec.o $libobjs $deplibs $wl-bnoentry '$compiler_flags_filtered'$wl-bE:$export_symbols$allow_undefined_flag~$STRIP -e $output_objdir/$realname.d/$shared_archive_member_spec.o~( func_echo_all "#! $soname($shared_archive_member_spec.o)"; if test shr_64 = "$shared_archive_member_spec"; then func_echo_all "# 64"; else func_echo_all "# 32"; fi; cat $export_symbols ) > $output_objdir/$realname.d/$shared_archive_member_spec.imp~$AR $AR_FLAGS $output_objdir/$soname $output_objdir/$realname.d/$shared_archive_member_spec.o $output_objdir/$realname.d/$shared_archive_member_spec.imp'
+ else
+ # used by -dlpreopen to get the symbols
+ _LT_TAGVAR(archive_expsym_cmds, $1)="$_LT_TAGVAR(archive_expsym_cmds, $1)"'~$MV $output_objdir/$realname.d/$soname $output_objdir'
+ fi
+ _LT_TAGVAR(archive_expsym_cmds, $1)="$_LT_TAGVAR(archive_expsym_cmds, $1)"'~$RM -r $output_objdir/$realname.d'
fi
fi
;;
@@ -5606,7 +6613,7 @@
_LT_TAGVAR(allow_undefined_flag, $1)=unsupported
# Joseph Beckenbach <jrb3 at best.com> says some releases of gcc
# support --undefined. This deserves some investigation. FIXME
- _LT_TAGVAR(archive_cmds, $1)='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -nostart $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib'
else
_LT_TAGVAR(ld_shlibs, $1)=no
fi
@@ -5622,32 +6629,108 @@
;;
cygwin* | mingw* | pw32* | cegcc*)
- # _LT_TAGVAR(hardcode_libdir_flag_spec, $1) is actually meaningless,
- # as there is no search path for DLLs.
- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
- _LT_TAGVAR(allow_undefined_flag, $1)=unsupported
- _LT_TAGVAR(always_export_symbols, $1)=no
- _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
+ case $GXX,$cc_basename in
+ ,cl* | no,cl*)
+ # Native MSVC
+ # hardcode_libdir_flag_spec is actually meaningless, as there is
+ # no search path for DLLs.
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)=' '
+ _LT_TAGVAR(allow_undefined_flag, $1)=unsupported
+ _LT_TAGVAR(always_export_symbols, $1)=yes
+ _LT_TAGVAR(file_list_spec, $1)='@'
+ # Tell ltmain to make .lib files, not .a files.
+ libext=lib
+ # Tell ltmain to make .dll files, not .so files.
+ shrext_cmds=.dll
+ # FIXME: Setting linknames here is a bad hack.
+ _LT_TAGVAR(archive_cmds, $1)='$CC -o $output_objdir/$soname $libobjs $compiler_flags $deplibs -Wl,-DLL,-IMPLIB:"$tool_output_objdir$libname.dll.lib"~linknames='
+ _LT_TAGVAR(archive_expsym_cmds, $1)='if _LT_DLL_DEF_P([$export_symbols]); then
+ cp "$export_symbols" "$output_objdir/$soname.def";
+ echo "$tool_output_objdir$soname.def" > "$output_objdir/$soname.exp";
+ else
+ $SED -e '\''s/^/-link -EXPORT:/'\'' < $export_symbols > $output_objdir/$soname.exp;
+ fi~
+ $CC -o $tool_output_objdir$soname $libobjs $compiler_flags $deplibs "@$tool_output_objdir$soname.exp" -Wl,-DLL,-IMPLIB:"$tool_output_objdir$libname.dll.lib"~
+ linknames='
+ # The linker will not automatically build a static lib if we build a DLL.
+ # _LT_TAGVAR(old_archive_from_new_cmds, $1)='true'
+ _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
+ # Don't use ranlib
+ _LT_TAGVAR(old_postinstall_cmds, $1)='chmod 644 $oldlib'
+ _LT_TAGVAR(postlink_cmds, $1)='lt_outputfile="@OUTPUT@"~
+ lt_tool_outputfile="@TOOL_OUTPUT@"~
+ case $lt_outputfile in
+ *.exe|*.EXE) ;;
+ *)
+ lt_outputfile=$lt_outputfile.exe
+ lt_tool_outputfile=$lt_tool_outputfile.exe
+ ;;
+ esac~
+ func_to_tool_file "$lt_outputfile"~
+ if test : != "$MANIFEST_TOOL" && test -f "$lt_outputfile.manifest"; then
+ $MANIFEST_TOOL -manifest "$lt_tool_outputfile.manifest" -outputresource:"$lt_tool_outputfile" || exit 1;
+ $RM "$lt_outputfile.manifest";
+ fi'
+ ;;
+ *)
+ # g++
+ # _LT_TAGVAR(hardcode_libdir_flag_spec, $1) is actually meaningless,
+ # as there is no search path for DLLs.
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl--export-all-symbols'
+ _LT_TAGVAR(allow_undefined_flag, $1)=unsupported
+ _LT_TAGVAR(always_export_symbols, $1)=no
+ _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
- if $LD --help 2>&1 | $GREP 'auto-import' > /dev/null; then
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
- # If the export-symbols file already is a .def file (1st line
- # is EXPORTS), use it as is; otherwise, prepend...
- _LT_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
- cp $export_symbols $output_objdir/$soname.def;
- else
- echo EXPORTS > $output_objdir/$soname.def;
- cat $export_symbols >> $output_objdir/$soname.def;
- fi~
- $CC -shared -nostdlib $output_objdir/$soname.def $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
- else
- _LT_TAGVAR(ld_shlibs, $1)=no
- fi
- ;;
+ if $LD --help 2>&1 | $GREP 'auto-import' > /dev/null; then
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname $wl--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
+ # If the export-symbols file already is a .def file, use it as
+ # is; otherwise, prepend EXPORTS...
+ _LT_TAGVAR(archive_expsym_cmds, $1)='if _LT_DLL_DEF_P([$export_symbols]); then
+ cp $export_symbols $output_objdir/$soname.def;
+ else
+ echo EXPORTS > $output_objdir/$soname.def;
+ cat $export_symbols >> $output_objdir/$soname.def;
+ fi~
+ $CC -shared -nostdlib $output_objdir/$soname.def $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname $wl--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
+ else
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ fi
+ ;;
+ esac
+ ;;
darwin* | rhapsody*)
_LT_DARWIN_LINKER_FEATURES($1)
;;
+ os2*)
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
+ _LT_TAGVAR(hardcode_minus_L, $1)=yes
+ _LT_TAGVAR(allow_undefined_flag, $1)=unsupported
+ shrext_cmds=.dll
+ _LT_TAGVAR(archive_cmds, $1)='$ECHO "LIBRARY ${soname%$shared_ext} INITINSTANCE TERMINSTANCE" > $output_objdir/$libname.def~
+ $ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~
+ $ECHO "DATA MULTIPLE NONSHARED" >> $output_objdir/$libname.def~
+ $ECHO EXPORTS >> $output_objdir/$libname.def~
+ emxexp $libobjs | $SED /"_DLL_InitTerm"/d >> $output_objdir/$libname.def~
+ $CC -Zdll -Zcrtdll -o $output_objdir/$soname $libobjs $deplibs $compiler_flags $output_objdir/$libname.def~
+ emximp -o $lib $output_objdir/$libname.def'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$ECHO "LIBRARY ${soname%$shared_ext} INITINSTANCE TERMINSTANCE" > $output_objdir/$libname.def~
+ $ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~
+ $ECHO "DATA MULTIPLE NONSHARED" >> $output_objdir/$libname.def~
+ $ECHO EXPORTS >> $output_objdir/$libname.def~
+ prefix_cmds="$SED"~
+ if test EXPORTS = "`$SED 1q $export_symbols`"; then
+ prefix_cmds="$prefix_cmds -e 1d";
+ fi~
+ prefix_cmds="$prefix_cmds -e \"s/^\(.*\)$/_\1/g\""~
+ cat $export_symbols | $prefix_cmds >> $output_objdir/$libname.def~
+ $CC -Zdll -Zcrtdll -o $output_objdir/$soname $libobjs $deplibs $compiler_flags $output_objdir/$libname.def~
+ emximp -o $lib $output_objdir/$libname.def'
+ _LT_TAGVAR(old_archive_From_new_cmds, $1)='emximp -o $output_objdir/${libname}_dll.a $output_objdir/$libname.def'
+ _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
+ ;;
+
dgux*)
case $cc_basename in
ec++*)
@@ -5666,7 +6749,7 @@
esac
;;
- freebsd[[12]]*)
+ freebsd2.*)
# C++ shared libraries reported to be fairly broken before
# switch to ELF
_LT_TAGVAR(ld_shlibs, $1)=no
@@ -5682,13 +6765,15 @@
_LT_TAGVAR(ld_shlibs, $1)=yes
;;
- gnu*)
+ haiku*)
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib'
+ _LT_TAGVAR(link_all_deplibs, $1)=yes
;;
hpux9*)
- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl+b $wl$libdir'
_LT_TAGVAR(hardcode_libdir_separator, $1)=:
- _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl-E'
_LT_TAGVAR(hardcode_direct, $1)=yes
_LT_TAGVAR(hardcode_minus_L, $1)=yes # Not in the search PATH,
# but as the default
@@ -5700,7 +6785,7 @@
_LT_TAGVAR(ld_shlibs, $1)=no
;;
aCC*)
- _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$CC -b ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
+ _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$CC -b $wl+b $wl$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test "x$output_objdir/$soname" = "x$lib" || mv $output_objdir/$soname $lib'
# Commands to make compiler produce verbose output that lists
# what "hidden" libraries, object files and flags are used when
# linking a shared library.
@@ -5709,11 +6794,11 @@
# explicitly linking system object files so we need to strip them
# from the output so that they don't get included in the library
# dependencies.
- output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | $EGREP "\-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; $ECHO "X$list" | $Xsed'
+ output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | $EGREP "\-L"`; list= ; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"'
;;
*)
- if test "$GXX" = yes; then
- _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$CC -shared -nostdlib -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
+ if test yes = "$GXX"; then
+ _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$CC -shared -nostdlib $pic_flag $wl+b $wl$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test "x$output_objdir/$soname" = "x$lib" || mv $output_objdir/$soname $lib'
else
# FIXME: insert proper C++ library support
_LT_TAGVAR(ld_shlibs, $1)=no
@@ -5723,8 +6808,8 @@
;;
hpux10*|hpux11*)
- if test $with_gnu_ld = no; then
- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
+ if test no = "$with_gnu_ld"; then
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl+b $wl$libdir'
_LT_TAGVAR(hardcode_libdir_separator, $1)=:
case $host_cpu in
@@ -5731,7 +6816,7 @@
hppa*64*|ia64*)
;;
*)
- _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl-E'
;;
esac
fi
@@ -5757,13 +6842,13 @@
aCC*)
case $host_cpu in
hppa*64*)
- _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -b $wl+h $wl$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
;;
ia64*)
- _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -b $wl+h $wl$soname $wl+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
;;
*)
- _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -b $wl+h $wl$soname $wl+b $wl$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
;;
esac
# Commands to make compiler produce verbose output that lists
@@ -5774,20 +6859,20 @@
# explicitly linking system object files so we need to strip them
# from the output so that they don't get included in the library
# dependencies.
- output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | $GREP "\-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; $ECHO "X$list" | $Xsed'
+ output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | $GREP "\-L"`; list= ; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"'
;;
*)
- if test "$GXX" = yes; then
- if test $with_gnu_ld = no; then
+ if test yes = "$GXX"; then
+ if test no = "$with_gnu_ld"; then
case $host_cpu in
hppa*64*)
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib -fPIC $wl+h $wl$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
;;
ia64*)
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $pic_flag $wl+h $wl$soname $wl+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
;;
*)
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $pic_flag $wl+h $wl$soname $wl+b $wl$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
;;
esac
fi
@@ -5802,8 +6887,8 @@
interix[[3-9]]*)
_LT_TAGVAR(hardcode_direct, $1)=no
_LT_TAGVAR(hardcode_shlibpath_var, $1)=no
- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
- _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath,$libdir'
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl-E'
# Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc.
# Instead, shared libraries are loaded at an image base (0x10000000 by
# default) and relocated if they conflict, which is a slow very memory
@@ -5810,14 +6895,14 @@
# consuming and fragmenting process. To avoid this, we pick a random,
# 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link
# time. Moving up from 0x10000000 also allows more sbrk(2) space.
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
- _LT_TAGVAR(archive_expsym_cmds, $1)='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-h,$soname $wl--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='sed "s|^|_|" $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-h,$soname $wl--retain-symbols-file,$output_objdir/$soname.expsym $wl--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
;;
irix5* | irix6*)
case $cc_basename in
CC*)
# SGI C++
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared -all -multigot $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared -all -multigot $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry $output_objdir/so_locations -o $lib'
# Archives containing C++ object files must be created using
# "CC -ar", where "CC" is the IRIX C++ compiler. This is
@@ -5826,22 +6911,22 @@
_LT_TAGVAR(old_archive_cmds, $1)='$CC -ar -WR,-u -o $oldlib $oldobjs'
;;
*)
- if test "$GXX" = yes; then
- if test "$with_gnu_ld" = no; then
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+ if test yes = "$GXX"; then
+ if test no = "$with_gnu_ld"; then
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-soname $wl$soname `test -n "$verstring" && func_echo_all "$wl-set_version $wl$verstring"` $wl-update_registry $wl$output_objdir/so_locations -o $lib'
else
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` -o $lib'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-soname $wl$soname `test -n "$verstring" && func_echo_all "$wl-set_version $wl$verstring"` -o $lib'
fi
fi
_LT_TAGVAR(link_all_deplibs, $1)=yes
;;
esac
- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath $wl$libdir'
_LT_TAGVAR(hardcode_libdir_separator, $1)=:
_LT_TAGVAR(inherit_rpath, $1)=yes
;;
- linux* | k*bsd*-gnu)
+ linux* | k*bsd*-gnu | kopensolaris*-gnu | gnu*)
case $cc_basename in
KCC*)
# Kuck and Associates, Inc. (KAI) C++ Compiler
@@ -5849,8 +6934,8 @@
# KCC will only create a shared library if the output file
# ends with ".so" (or ".sl" for HP-UX), so rename the library
# to its proper name (with version) after linking.
- _LT_TAGVAR(archive_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib'
- _LT_TAGVAR(archive_expsym_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib ${wl}-retain-symbols-file,$export_symbols; mv \$templib $lib'
+ _LT_TAGVAR(archive_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\$tempext\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\$tempext\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib $wl-retain-symbols-file,$export_symbols; mv \$templib $lib'
# Commands to make compiler produce verbose output that lists
# what "hidden" libraries, object files and flags are used when
# linking a shared library.
@@ -5859,10 +6944,10 @@
# explicitly linking system object files so we need to strip them
# from the output so that they don't get included in the library
# dependencies.
- output_verbose_link_cmd='templist=`$CC $CFLAGS -v conftest.$objext -o libconftest$shared_ext 2>&1 | $GREP "ld"`; rm -f libconftest$shared_ext; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; $ECHO "X$list" | $Xsed'
+ output_verbose_link_cmd='templist=`$CC $CFLAGS -v conftest.$objext -o libconftest$shared_ext 2>&1 | $GREP "ld"`; rm -f libconftest$shared_ext; list= ; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"'
- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
- _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath,$libdir'
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl--export-dynamic'
# Archives containing C++ object files must be created using
# "CC -Bstatic", where "CC" is the KAI C++ compiler.
@@ -5876,8 +6961,8 @@
# earlier do not add the objects themselves.
case `$CC -V 2>&1` in
*"Version 7."*)
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib'
- _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-soname $wl$soname -o $lib'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-soname $wl$soname $wl-retain-symbols-file $wl$export_symbols -o $lib'
;;
*) # Version 8.0 or newer
tmp_idyn=
@@ -5884,51 +6969,51 @@
case $host_cpu in
ia64*) tmp_idyn=' -i_dynamic';;
esac
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared'"$tmp_idyn"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
- _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared'"$tmp_idyn"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared'"$tmp_idyn"' $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared'"$tmp_idyn"' $libobjs $deplibs $compiler_flags $wl-soname $wl$soname $wl-retain-symbols-file $wl$export_symbols -o $lib'
;;
esac
_LT_TAGVAR(archive_cmds_need_lc, $1)=no
- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
- _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
- _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive$convenience ${wl}--no-whole-archive'
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath,$libdir'
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl--export-dynamic'
+ _LT_TAGVAR(whole_archive_flag_spec, $1)='$wl--whole-archive$convenience $wl--no-whole-archive'
;;
pgCC* | pgcpp*)
# Portland Group C++ compiler
case `$CC -V` in
- *pgCC\ [[1-5]]* | *pgcpp\ [[1-5]]*)
+ *pgCC\ [[1-5]].* | *pgcpp\ [[1-5]].*)
_LT_TAGVAR(prelink_cmds, $1)='tpldir=Template.dir~
- rm -rf $tpldir~
- $CC --prelink_objects --instantiation_dir $tpldir $objs $libobjs $compile_deplibs~
- compile_command="$compile_command `find $tpldir -name \*.o | $NL2SP`"'
+ rm -rf $tpldir~
+ $CC --prelink_objects --instantiation_dir $tpldir $objs $libobjs $compile_deplibs~
+ compile_command="$compile_command `find $tpldir -name \*.o | sort | $NL2SP`"'
_LT_TAGVAR(old_archive_cmds, $1)='tpldir=Template.dir~
- rm -rf $tpldir~
- $CC --prelink_objects --instantiation_dir $tpldir $oldobjs$old_deplibs~
- $AR $AR_FLAGS $oldlib$oldobjs$old_deplibs `find $tpldir -name \*.o | $NL2SP`~
- $RANLIB $oldlib'
+ rm -rf $tpldir~
+ $CC --prelink_objects --instantiation_dir $tpldir $oldobjs$old_deplibs~
+ $AR $AR_FLAGS $oldlib$oldobjs$old_deplibs `find $tpldir -name \*.o | sort | $NL2SP`~
+ $RANLIB $oldlib'
_LT_TAGVAR(archive_cmds, $1)='tpldir=Template.dir~
- rm -rf $tpldir~
- $CC --prelink_objects --instantiation_dir $tpldir $predep_objects $libobjs $deplibs $convenience $postdep_objects~
- $CC -shared $pic_flag $predep_objects $libobjs $deplibs `find $tpldir -name \*.o | $NL2SP` $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname -o $lib'
+ rm -rf $tpldir~
+ $CC --prelink_objects --instantiation_dir $tpldir $predep_objects $libobjs $deplibs $convenience $postdep_objects~
+ $CC -shared $pic_flag $predep_objects $libobjs $deplibs `find $tpldir -name \*.o | sort | $NL2SP` $postdep_objects $compiler_flags $wl-soname $wl$soname -o $lib'
_LT_TAGVAR(archive_expsym_cmds, $1)='tpldir=Template.dir~
- rm -rf $tpldir~
- $CC --prelink_objects --instantiation_dir $tpldir $predep_objects $libobjs $deplibs $convenience $postdep_objects~
- $CC -shared $pic_flag $predep_objects $libobjs $deplibs `find $tpldir -name \*.o | $NL2SP` $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname ${wl}-retain-symbols-file ${wl}$export_symbols -o $lib'
+ rm -rf $tpldir~
+ $CC --prelink_objects --instantiation_dir $tpldir $predep_objects $libobjs $deplibs $convenience $postdep_objects~
+ $CC -shared $pic_flag $predep_objects $libobjs $deplibs `find $tpldir -name \*.o | sort | $NL2SP` $postdep_objects $compiler_flags $wl-soname $wl$soname $wl-retain-symbols-file $wl$export_symbols -o $lib'
;;
- *) # Version 6 will use weak symbols
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname -o $lib'
- _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname ${wl}-retain-symbols-file ${wl}$export_symbols -o $lib'
+ *) # Version 6 and above use weak symbols
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-soname $wl$soname -o $lib'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-soname $wl$soname $wl-retain-symbols-file $wl$export_symbols -o $lib'
;;
esac
- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}--rpath ${wl}$libdir'
- _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
- _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $ECHO \"$new_convenience\"` ${wl}--no-whole-archive'
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl--rpath $wl$libdir'
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl--export-dynamic'
+ _LT_TAGVAR(whole_archive_flag_spec, $1)='$wl--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` $wl--no-whole-archive'
;;
cxx*)
# Compaq C++
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib'
- _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib ${wl}-retain-symbols-file $wl$export_symbols'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-soname $wl$soname -o $lib'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-soname $wl$soname -o $lib $wl-retain-symbols-file $wl$export_symbols'
runpath_var=LD_RUN_PATH
_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir'
@@ -5942,18 +7027,18 @@
# explicitly linking system object files so we need to strip them
# from the output so that they don't get included in the library
# dependencies.
- output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "ld"`; templist=`$ECHO "X$templist" | $Xsed -e "s/\(^.*ld.*\)\( .*ld .*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; $ECHO "X$list" | $Xsed'
+ output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "ld"`; templist=`func_echo_all "$templist" | $SED "s/\(^.*ld.*\)\( .*ld .*$\)/\1/"`; list= ; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "X$list" | $Xsed'
;;
- xl*)
+ xl* | mpixl* | bgxl*)
# IBM XL 8.0 on PPC, with GNU ld
- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
- _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
- _LT_TAGVAR(archive_cmds, $1)='$CC -qmkshrobj $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
- if test "x$supports_anon_versioning" = xyes; then
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath $wl$libdir'
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl--export-dynamic'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -qmkshrobj $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib'
+ if test yes = "$supports_anon_versioning"; then
_LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $output_objdir/$libname.ver~
- cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
- echo "local: *; };" >> $output_objdir/$libname.ver~
- $CC -qmkshrobj $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib'
+ cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
+ echo "local: *; };" >> $output_objdir/$libname.ver~
+ $CC -qmkshrobj $libobjs $deplibs $compiler_flags $wl-soname $wl$soname $wl-version-script $wl$output_objdir/$libname.ver -o $lib'
fi
;;
*)
@@ -5961,16 +7046,16 @@
*Sun\ C*)
# Sun C++ 5.9
_LT_TAGVAR(no_undefined_flag, $1)=' -zdefs'
- _LT_TAGVAR(archive_cmds, $1)='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
- _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-retain-symbols-file ${wl}$export_symbols'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -G$allow_undefined_flag -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G$allow_undefined_flag -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-retain-symbols-file $wl$export_symbols'
_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
- _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; $ECHO \"$new_convenience\"` ${wl}--no-whole-archive'
+ _LT_TAGVAR(whole_archive_flag_spec, $1)='$wl--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` $wl--no-whole-archive'
_LT_TAGVAR(compiler_needs_object, $1)=yes
# Not sure whether something based on
# $CC $CFLAGS -v conftest.$objext -o libconftest$shared_ext 2>&1
# would be better.
- output_verbose_link_cmd='echo'
+ output_verbose_link_cmd='func_echo_all'
# Archives containing C++ object files must be created using
# "CC -xar", where "CC" is the Sun C++ compiler. This is
@@ -6022,24 +7107,19 @@
_LT_TAGVAR(ld_shlibs, $1)=yes
;;
- openbsd2*)
- # C++ shared libraries are fairly broken
- _LT_TAGVAR(ld_shlibs, $1)=no
- ;;
-
- openbsd*)
+ openbsd* | bitrig*)
if test -f /usr/libexec/ld.so; then
_LT_TAGVAR(hardcode_direct, $1)=yes
_LT_TAGVAR(hardcode_shlibpath_var, $1)=no
_LT_TAGVAR(hardcode_direct_absolute, $1)=yes
_LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib'
- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
- if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
- _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-retain-symbols-file,$export_symbols -o $lib'
- _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
- _LT_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath,$libdir'
+ if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`"; then
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-retain-symbols-file,$export_symbols -o $lib'
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl-E'
+ _LT_TAGVAR(whole_archive_flag_spec, $1)=$wlarc'--whole-archive$convenience '$wlarc'--no-whole-archive'
fi
- output_verbose_link_cmd=echo
+ output_verbose_link_cmd=func_echo_all
else
_LT_TAGVAR(ld_shlibs, $1)=no
fi
@@ -6053,9 +7133,9 @@
# KCC will only create a shared library if the output file
# ends with ".so" (or ".sl" for HP-UX), so rename the library
# to its proper name (with version) after linking.
- _LT_TAGVAR(archive_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo "$lib" | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib'
+ _LT_TAGVAR(archive_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo "$lib" | $SED -e "s/\$tempext\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib'
- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath,$libdir'
_LT_TAGVAR(hardcode_libdir_separator, $1)=:
# Archives containing C++ object files must be created using
@@ -6073,17 +7153,17 @@
cxx*)
case $host in
osf3*)
- _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $soname `test -n "$verstring" && $ECHO "X${wl}-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib'
- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
+ _LT_TAGVAR(allow_undefined_flag, $1)=' $wl-expect_unresolved $wl\*'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared$allow_undefined_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-soname $soname `test -n "$verstring" && func_echo_all "$wl-set_version $verstring"` -update_registry $output_objdir/so_locations -o $lib'
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath $wl$libdir'
;;
*)
_LT_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*'
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared$allow_undefined_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry $output_objdir/so_locations -o $lib'
_LT_TAGVAR(archive_expsym_cmds, $1)='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done~
- echo "-hidden">> $lib.exp~
- $CC -shared$allow_undefined_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname ${wl}-input ${wl}$lib.exp `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib~
- $RM $lib.exp'
+ echo "-hidden">> $lib.exp~
+ $CC -shared$allow_undefined_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname $wl-input $wl$lib.exp `test -n "$verstring" && $ECHO "-set_version $verstring"` -update_registry $output_objdir/so_locations -o $lib~
+ $RM $lib.exp'
_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir'
;;
esac
@@ -6098,27 +7178,27 @@
# explicitly linking system object files so we need to strip them
# from the output so that they don't get included in the library
# dependencies.
- output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "ld" | $GREP -v "ld:"`; templist=`$ECHO "X$templist" | $Xsed -e "s/\(^.*ld.*\)\( .*ld.*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; $ECHO "X$list" | $Xsed'
+ output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "ld" | $GREP -v "ld:"`; templist=`func_echo_all "$templist" | $SED "s/\(^.*ld.*\)\( .*ld.*$\)/\1/"`; list= ; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"'
;;
*)
- if test "$GXX" = yes && test "$with_gnu_ld" = no; then
- _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
+ if test yes,no = "$GXX,$with_gnu_ld"; then
+ _LT_TAGVAR(allow_undefined_flag, $1)=' $wl-expect_unresolved $wl\*'
case $host in
osf3*)
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $allow_undefined_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-soname $wl$soname `test -n "$verstring" && func_echo_all "$wl-set_version $wl$verstring"` $wl-update_registry $wl$output_objdir/so_locations -o $lib'
;;
*)
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -nostdlib $allow_undefined_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-msym $wl-soname $wl$soname `test -n "$verstring" && func_echo_all "$wl-set_version $wl$verstring"` $wl-update_registry $wl$output_objdir/so_locations -o $lib'
;;
esac
- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath $wl$libdir'
_LT_TAGVAR(hardcode_libdir_separator, $1)=:
# Commands to make compiler produce verbose output that lists
# what "hidden" libraries, object files and flags are used when
# linking a shared library.
- output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "\-L"'
+ output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP -v "^Configured with:" | $GREP "\-L"'
else
# FIXME: insert proper C++ library support
@@ -6154,13 +7234,13 @@
solaris*)
case $cc_basename in
- CC*)
+ CC* | sunCC*)
# Sun C++ 4.2, 5.x and Centerline C++
_LT_TAGVAR(archive_cmds_need_lc,$1)=yes
_LT_TAGVAR(no_undefined_flag, $1)=' -zdefs'
- _LT_TAGVAR(archive_cmds, $1)='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -G$allow_undefined_flag -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
_LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
- $CC -G${allow_undefined_flag} ${wl}-M ${wl}$lib.exp -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp'
+ $CC -G$allow_undefined_flag $wl-M $wl$lib.exp -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp'
_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
_LT_TAGVAR(hardcode_shlibpath_var, $1)=no
@@ -6168,7 +7248,7 @@
solaris2.[[0-5]] | solaris2.[[0-5]].*) ;;
*)
# The compiler driver will combine and reorder linker options,
- # but understands `-z linker_flag'.
+ # but understands '-z linker_flag'.
# Supported since Solaris 2.6 (maybe 2.5.1?)
_LT_TAGVAR(whole_archive_flag_spec, $1)='-z allextract$convenience -z defaultextract'
;;
@@ -6175,7 +7255,7 @@
esac
_LT_TAGVAR(link_all_deplibs, $1)=yes
- output_verbose_link_cmd='echo'
+ output_verbose_link_cmd='func_echo_all'
# Archives containing C++ object files must be created using
# "CC -xar", where "CC" is the Sun C++ compiler. This is
@@ -6185,7 +7265,7 @@
;;
gcx*)
# Green Hills C++ Compiler
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-h $wl$soname -o $lib'
# The C++ compiler must be used to create the archive.
_LT_TAGVAR(old_archive_cmds, $1)='$CC $LDFLAGS -archive -o $oldlib $oldobjs'
@@ -6192,35 +7272,35 @@
;;
*)
# GNU C++ compiler with Solaris linker
- if test "$GXX" = yes && test "$with_gnu_ld" = no; then
- _LT_TAGVAR(no_undefined_flag, $1)=' ${wl}-z ${wl}defs'
+ if test yes,no = "$GXX,$with_gnu_ld"; then
+ _LT_TAGVAR(no_undefined_flag, $1)=' $wl-z ${wl}defs'
if $CC --version | $GREP -v '^2\.7' > /dev/null; then
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-h $wl$soname -o $lib'
_LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
- $CC -shared -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp'
+ $CC -shared $pic_flag -nostdlib $wl-M $wl$lib.exp $wl-h $wl$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp'
# Commands to make compiler produce verbose output that lists
# what "hidden" libraries, object files and flags are used when
# linking a shared library.
- output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "\-L"'
+ output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP -v "^Configured with:" | $GREP "\-L"'
else
- # g++ 2.7 appears to require `-G' NOT `-shared' on this
+ # g++ 2.7 appears to require '-G' NOT '-shared' on this
# platform.
- _LT_TAGVAR(archive_cmds, $1)='$CC -G -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -G -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-h $wl$soname -o $lib'
_LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
- $CC -G -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp'
+ $CC -G -nostdlib $wl-M $wl$lib.exp $wl-h $wl$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp'
# Commands to make compiler produce verbose output that lists
# what "hidden" libraries, object files and flags are used when
# linking a shared library.
- output_verbose_link_cmd='$CC -G $CFLAGS -v conftest.$objext 2>&1 | $GREP "\-L"'
+ output_verbose_link_cmd='$CC -G $CFLAGS -v conftest.$objext 2>&1 | $GREP -v "^Configured with:" | $GREP "\-L"'
fi
- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $wl$libdir'
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-R $wl$libdir'
case $host_os in
solaris2.[[0-5]] | solaris2.[[0-5]].*) ;;
*)
- _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract'
+ _LT_TAGVAR(whole_archive_flag_spec, $1)='$wl-z ${wl}allextract$convenience $wl-z ${wl}defaultextract'
;;
esac
fi
@@ -6229,7 +7309,7 @@
;;
sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[[01]].[[10]]* | unixware7* | sco3.2v5.0.[[024]]*)
- _LT_TAGVAR(no_undefined_flag, $1)='${wl}-z,text'
+ _LT_TAGVAR(no_undefined_flag, $1)='$wl-z,text'
_LT_TAGVAR(archive_cmds_need_lc, $1)=no
_LT_TAGVAR(hardcode_shlibpath_var, $1)=no
runpath_var='LD_RUN_PATH'
@@ -6236,41 +7316,45 @@
case $cc_basename in
CC*)
- _LT_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
- _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -G $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G $wl-Bexport:$export_symbols $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
;;
*)
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
- _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $wl-Bexport:$export_symbols $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
;;
esac
;;
sysv5* | sco3.2v5* | sco5v6*)
- # Note: We can NOT use -z defs as we might desire, because we do not
+ # Note: We CANNOT use -z defs as we might desire, because we do not
# link with -lc, and that would cause any symbols used from libc to
# always be unresolved, which means just about no library would
# ever link correctly. If we're not using GNU ld we use -z text
# though, which does catch some bad symbols but isn't as heavy-handed
# as -z defs.
- _LT_TAGVAR(no_undefined_flag, $1)='${wl}-z,text'
- _LT_TAGVAR(allow_undefined_flag, $1)='${wl}-z,nodefs'
+ _LT_TAGVAR(no_undefined_flag, $1)='$wl-z,text'
+ _LT_TAGVAR(allow_undefined_flag, $1)='$wl-z,nodefs'
_LT_TAGVAR(archive_cmds_need_lc, $1)=no
_LT_TAGVAR(hardcode_shlibpath_var, $1)=no
- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R,$libdir'
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-R,$libdir'
_LT_TAGVAR(hardcode_libdir_separator, $1)=':'
_LT_TAGVAR(link_all_deplibs, $1)=yes
- _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-Bexport'
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl-Bexport'
runpath_var='LD_RUN_PATH'
case $cc_basename in
CC*)
- _LT_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
- _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -G $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G $wl-Bexport:$export_symbols $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ _LT_TAGVAR(old_archive_cmds, $1)='$CC -Tprelink_objects $oldobjs~
+ '"$_LT_TAGVAR(old_archive_cmds, $1)"
+ _LT_TAGVAR(reload_cmds, $1)='$CC -Tprelink_objects $reload_objs~
+ '"$_LT_TAGVAR(reload_cmds, $1)"
;;
*)
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
- _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $wl-Bexport:$export_symbols $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
;;
esac
;;
@@ -6301,10 +7385,10 @@
esac
AC_MSG_RESULT([$_LT_TAGVAR(ld_shlibs, $1)])
- test "$_LT_TAGVAR(ld_shlibs, $1)" = no && can_build_shared=no
+ test no = "$_LT_TAGVAR(ld_shlibs, $1)" && can_build_shared=no
- _LT_TAGVAR(GCC, $1)="$GXX"
- _LT_TAGVAR(LD, $1)="$LD"
+ _LT_TAGVAR(GCC, $1)=$GXX
+ _LT_TAGVAR(LD, $1)=$LD
## CAVEAT EMPTOR:
## There is no encapsulation within the following macros, do not change
@@ -6322,6 +7406,7 @@
fi # test -n "$compiler"
CC=$lt_save_CC
+ CFLAGS=$lt_save_CFLAGS
LDCXX=$LD
LD=$lt_save_LD
GCC=$lt_save_GCC
@@ -6330,12 +7415,36 @@
lt_cv_path_LD=$lt_save_path_LD
lt_cv_prog_gnu_ldcxx=$lt_cv_prog_gnu_ld
lt_cv_prog_gnu_ld=$lt_save_with_gnu_ld
-fi # test "$_lt_caught_CXX_error" != yes
+fi # test yes != "$_lt_caught_CXX_error"
AC_LANG_POP
])# _LT_LANG_CXX_CONFIG
+# _LT_FUNC_STRIPNAME_CNF
+# ----------------------
+# func_stripname_cnf prefix suffix name
+# strip PREFIX and SUFFIX off of NAME.
+# PREFIX and SUFFIX must not contain globbing or regex special
+# characters, hashes, percent signs, but SUFFIX may contain a leading
+# dot (in which case that matches only a dot).
+#
+# This function is identical to the (non-XSI) version of func_stripname,
+# except this one can be used by m4 code that may be executed by configure,
+# rather than the libtool script.
+m4_defun([_LT_FUNC_STRIPNAME_CNF],[dnl
+AC_REQUIRE([_LT_DECL_SED])
+AC_REQUIRE([_LT_PROG_ECHO_BACKSLASH])
+func_stripname_cnf ()
+{
+ case @S|@2 in
+ .*) func_stripname_result=`$ECHO "@S|@3" | $SED "s%^@S|@1%%; s%\\\\@S|@2\$%%"`;;
+ *) func_stripname_result=`$ECHO "@S|@3" | $SED "s%^@S|@1%%; s%@S|@2\$%%"`;;
+ esac
+} # func_stripname_cnf
+])# _LT_FUNC_STRIPNAME_CNF
+
+
# _LT_SYS_HIDDEN_LIBDEPS([TAGNAME])
# ---------------------------------
# Figure out "hidden" library dependencies from verbose
@@ -6344,6 +7453,7 @@
# objects, libraries and library flags.
m4_defun([_LT_SYS_HIDDEN_LIBDEPS],
[m4_require([_LT_FILEUTILS_DEFAULTS])dnl
+AC_REQUIRE([_LT_FUNC_STRIPNAME_CNF])dnl
# Dependencies to place before and after the object being linked:
_LT_TAGVAR(predep_objects, $1)=
_LT_TAGVAR(postdep_objects, $1)=
@@ -6393,7 +7503,20 @@
}
};
_LT_EOF
+], [$1], [GO], [cat > conftest.$ac_ext <<_LT_EOF
+package foo
+func foo() {
+}
+_LT_EOF
])
+
+_lt_libdeps_save_CFLAGS=$CFLAGS
+case "$CC $CFLAGS " in #(
+*\ -flto*\ *) CFLAGS="$CFLAGS -fno-lto" ;;
+*\ -fwhopr*\ *) CFLAGS="$CFLAGS -fno-whopr" ;;
+*\ -fuse-linker-plugin*\ *) CFLAGS="$CFLAGS -fno-use-linker-plugin" ;;
+esac
+
dnl Parse the compiler output and extract the necessary
dnl objects, libraries and library flags.
if AC_TRY_EVAL(ac_compile); then
@@ -6405,29 +7528,38 @@
pre_test_object_deps_done=no
for p in `eval "$output_verbose_link_cmd"`; do
- case $p in
+ case $prev$p in
-L* | -R* | -l*)
# Some compilers place space between "-{L,R}" and the path.
# Remove the space.
- if test $p = "-L" ||
- test $p = "-R"; then
+ if test x-L = "$p" ||
+ test x-R = "$p"; then
prev=$p
continue
- else
- prev=
fi
- if test "$pre_test_object_deps_done" = no; then
- case $p in
- -L* | -R*)
+ # Expand the sysroot to ease extracting the directories later.
+ if test -z "$prev"; then
+ case $p in
+ -L*) func_stripname_cnf '-L' '' "$p"; prev=-L; p=$func_stripname_result ;;
+ -R*) func_stripname_cnf '-R' '' "$p"; prev=-R; p=$func_stripname_result ;;
+ -l*) func_stripname_cnf '-l' '' "$p"; prev=-l; p=$func_stripname_result ;;
+ esac
+ fi
+ case $p in
+ =*) func_stripname_cnf '=' '' "$p"; p=$lt_sysroot$func_stripname_result ;;
+ esac
+ if test no = "$pre_test_object_deps_done"; then
+ case $prev in
+ -L | -R)
# Internal compiler library paths should come after those
# provided the user. The postdeps already come after the
# user supplied libs so there is no need to process them.
if test -z "$_LT_TAGVAR(compiler_lib_search_path, $1)"; then
- _LT_TAGVAR(compiler_lib_search_path, $1)="${prev}${p}"
+ _LT_TAGVAR(compiler_lib_search_path, $1)=$prev$p
else
- _LT_TAGVAR(compiler_lib_search_path, $1)="${_LT_TAGVAR(compiler_lib_search_path, $1)} ${prev}${p}"
+ _LT_TAGVAR(compiler_lib_search_path, $1)="${_LT_TAGVAR(compiler_lib_search_path, $1)} $prev$p"
fi
;;
# The "-l" case would never come before the object being
@@ -6435,13 +7567,15 @@
esac
else
if test -z "$_LT_TAGVAR(postdeps, $1)"; then
- _LT_TAGVAR(postdeps, $1)="${prev}${p}"
+ _LT_TAGVAR(postdeps, $1)=$prev$p
else
- _LT_TAGVAR(postdeps, $1)="${_LT_TAGVAR(postdeps, $1)} ${prev}${p}"
+ _LT_TAGVAR(postdeps, $1)="${_LT_TAGVAR(postdeps, $1)} $prev$p"
fi
fi
+ prev=
;;
+ *.lto.$objext) ;; # Ignore GCC LTO objects
*.$objext)
# This assumes that the test object file only shows up
# once in the compiler output.
@@ -6450,15 +7584,15 @@
continue
fi
- if test "$pre_test_object_deps_done" = no; then
+ if test no = "$pre_test_object_deps_done"; then
if test -z "$_LT_TAGVAR(predep_objects, $1)"; then
- _LT_TAGVAR(predep_objects, $1)="$p"
+ _LT_TAGVAR(predep_objects, $1)=$p
else
_LT_TAGVAR(predep_objects, $1)="$_LT_TAGVAR(predep_objects, $1) $p"
fi
else
if test -z "$_LT_TAGVAR(postdep_objects, $1)"; then
- _LT_TAGVAR(postdep_objects, $1)="$p"
+ _LT_TAGVAR(postdep_objects, $1)=$p
else
_LT_TAGVAR(postdep_objects, $1)="$_LT_TAGVAR(postdep_objects, $1) $p"
fi
@@ -6477,6 +7611,7 @@
fi
$RM -f confest.$objext
+CFLAGS=$_lt_libdeps_save_CFLAGS
# PORTME: override above test on systems where it is broken
m4_if([$1], [CXX],
@@ -6488,51 +7623,6 @@
_LT_TAGVAR(postdep_objects,$1)=
_LT_TAGVAR(postdeps,$1)=
;;
-
-linux*)
- case `$CC -V 2>&1 | sed 5q` in
- *Sun\ C*)
- # Sun C++ 5.9
-
- # The more standards-conforming stlport4 library is
- # incompatible with the Cstd library. Avoid specifying
- # it if it's in CXXFLAGS. Ignore libCrun as
- # -library=stlport4 depends on it.
- case " $CXX $CXXFLAGS " in
- *" -library=stlport4 "*)
- solaris_use_stlport4=yes
- ;;
- esac
-
- if test "$solaris_use_stlport4" != yes; then
- _LT_TAGVAR(postdeps,$1)='-library=Cstd -library=Crun'
- fi
- ;;
- esac
- ;;
-
-solaris*)
- case $cc_basename in
- CC*)
- # The more standards-conforming stlport4 library is
- # incompatible with the Cstd library. Avoid specifying
- # it if it's in CXXFLAGS. Ignore libCrun as
- # -library=stlport4 depends on it.
- case " $CXX $CXXFLAGS " in
- *" -library=stlport4 "*)
- solaris_use_stlport4=yes
- ;;
- esac
-
- # Adding this requires a known-good setup of shared libraries for
- # Sun compiler versions before 5.6, else PIC objects from an old
- # archive will be linked into the output, leading to subtle bugs.
- if test "$solaris_use_stlport4" != yes; then
- _LT_TAGVAR(postdeps,$1)='-library=Cstd -library=Crun'
- fi
- ;;
- esac
- ;;
esac
])
@@ -6541,7 +7631,7 @@
esac
_LT_TAGVAR(compiler_lib_search_dirs, $1)=
if test -n "${_LT_TAGVAR(compiler_lib_search_path, $1)}"; then
- _LT_TAGVAR(compiler_lib_search_dirs, $1)=`echo " ${_LT_TAGVAR(compiler_lib_search_path, $1)}" | ${SED} -e 's! -L! !g' -e 's!^ !!'`
+ _LT_TAGVAR(compiler_lib_search_dirs, $1)=`echo " ${_LT_TAGVAR(compiler_lib_search_path, $1)}" | $SED -e 's! -L! !g' -e 's!^ !!'`
fi
_LT_TAGDECL([], [compiler_lib_search_dirs], [1],
[The directories searched by this compiler when creating a shared library])
@@ -6557,32 +7647,16 @@
])# _LT_SYS_HIDDEN_LIBDEPS
-# _LT_PROG_F77
-# ------------
-# Since AC_PROG_F77 is broken, in that it returns the empty string
-# if there is no fortran compiler, we have our own version here.
-m4_defun([_LT_PROG_F77],
-[
-pushdef([AC_MSG_ERROR], [_lt_disable_F77=yes])
-AC_PROG_F77
-if test -z "$F77" || test "X$F77" = "Xno"; then
- _lt_disable_F77=yes
-fi
-popdef([AC_MSG_ERROR])
-])# _LT_PROG_F77
-
-dnl aclocal-1.4 backwards compatibility:
-dnl AC_DEFUN([_LT_PROG_F77], [])
-
-
# _LT_LANG_F77_CONFIG([TAG])
# --------------------------
# Ensure that the configuration variables for a Fortran 77 compiler are
# suitably defined. These variables are subsequently used by _LT_CONFIG
-# to write the compiler configuration to `libtool'.
+# to write the compiler configuration to 'libtool'.
m4_defun([_LT_LANG_F77_CONFIG],
-[AC_REQUIRE([_LT_PROG_F77])dnl
-AC_LANG_PUSH(Fortran 77)
+[AC_LANG_PUSH(Fortran 77)
+if test -z "$F77" || test no = "$F77"; then
+ _lt_disable_F77=yes
+fi
_LT_TAGVAR(archive_cmds_need_lc, $1)=no
_LT_TAGVAR(allow_undefined_flag, $1)=
@@ -6592,7 +7666,6 @@
_LT_TAGVAR(hardcode_direct, $1)=no
_LT_TAGVAR(hardcode_direct_absolute, $1)=no
_LT_TAGVAR(hardcode_libdir_flag_spec, $1)=
-_LT_TAGVAR(hardcode_libdir_flag_spec_ld, $1)=
_LT_TAGVAR(hardcode_libdir_separator, $1)=
_LT_TAGVAR(hardcode_minus_L, $1)=no
_LT_TAGVAR(hardcode_automatic, $1)=no
@@ -6601,6 +7674,8 @@
_LT_TAGVAR(module_expsym_cmds, $1)=
_LT_TAGVAR(link_all_deplibs, $1)=unknown
_LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds
+_LT_TAGVAR(reload_flag, $1)=$reload_flag
+_LT_TAGVAR(reload_cmds, $1)=$reload_cmds
_LT_TAGVAR(no_undefined_flag, $1)=
_LT_TAGVAR(whole_archive_flag_spec, $1)=
_LT_TAGVAR(enable_shared_with_static_runtimes, $1)=no
@@ -6616,7 +7691,7 @@
# the F77 compiler isn't working. Some variables (like enable_shared)
# are currently assumed to apply to all compilers on this platform,
# and will be corrupted by setting them based on a non-working compiler.
-if test "$_lt_disable_F77" != yes; then
+if test yes != "$_lt_disable_F77"; then
# Code to be used in simple compile tests
lt_simple_compile_test_code="\
subroutine t
@@ -6638,9 +7713,11 @@
_LT_LINKER_BOILERPLATE
# Allow CC to be a program name with arguments.
- lt_save_CC="$CC"
+ lt_save_CC=$CC
lt_save_GCC=$GCC
+ lt_save_CFLAGS=$CFLAGS
CC=${F77-"f77"}
+ CFLAGS=$FFLAGS
compiler=$CC
_LT_TAGVAR(compiler, $1)=$CC
_LT_CC_BASENAME([$compiler])
@@ -6650,13 +7727,13 @@
AC_MSG_RESULT([$can_build_shared])
AC_MSG_CHECKING([whether to build shared libraries])
- test "$can_build_shared" = "no" && enable_shared=no
+ test no = "$can_build_shared" && enable_shared=no
# On AIX, shared libraries and static libraries use the same namespace, and
# are all built from PIC.
case $host_os in
aix3*)
- test "$enable_shared" = yes && enable_static=no
+ test yes = "$enable_shared" && enable_static=no
if test -n "$RANLIB"; then
archive_cmds="$archive_cmds~\$RANLIB \$lib"
postinstall_cmds='$RANLIB $lib'
@@ -6663,8 +7740,12 @@
fi
;;
aix[[4-9]]*)
- if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then
- test "$enable_shared" = yes && enable_static=no
+ if test ia64 != "$host_cpu"; then
+ case $enable_shared,$with_aix_soname,$aix_use_runtimelinking in
+ yes,aix,yes) ;; # shared object as lib.so file only
+ yes,svr4,*) ;; # shared object as lib.so archive member only
+ yes,*) enable_static=no ;; # shared object in lib.a archive as well
+ esac
fi
;;
esac
@@ -6672,11 +7753,11 @@
AC_MSG_CHECKING([whether to build static libraries])
# Make sure either enable_shared or enable_static is yes.
- test "$enable_shared" = yes || enable_static=yes
+ test yes = "$enable_shared" || enable_static=yes
AC_MSG_RESULT([$enable_static])
- _LT_TAGVAR(GCC, $1)="$G77"
- _LT_TAGVAR(LD, $1)="$LD"
+ _LT_TAGVAR(GCC, $1)=$G77
+ _LT_TAGVAR(LD, $1)=$LD
## CAVEAT EMPTOR:
## There is no encapsulation within the following macros, do not change
@@ -6693,40 +7774,26 @@
fi # test -n "$compiler"
GCC=$lt_save_GCC
- CC="$lt_save_CC"
-fi # test "$_lt_disable_F77" != yes
+ CC=$lt_save_CC
+ CFLAGS=$lt_save_CFLAGS
+fi # test yes != "$_lt_disable_F77"
AC_LANG_POP
])# _LT_LANG_F77_CONFIG
-# _LT_PROG_FC
-# -----------
-# Since AC_PROG_FC is broken, in that it returns the empty string
-# if there is no fortran compiler, we have our own version here.
-m4_defun([_LT_PROG_FC],
-[
-pushdef([AC_MSG_ERROR], [_lt_disable_FC=yes])
-AC_PROG_FC
-if test -z "$FC" || test "X$FC" = "Xno"; then
- _lt_disable_FC=yes
-fi
-popdef([AC_MSG_ERROR])
-])# _LT_PROG_FC
-
-dnl aclocal-1.4 backwards compatibility:
-dnl AC_DEFUN([_LT_PROG_FC], [])
-
-
# _LT_LANG_FC_CONFIG([TAG])
# -------------------------
# Ensure that the configuration variables for a Fortran compiler are
# suitably defined. These variables are subsequently used by _LT_CONFIG
-# to write the compiler configuration to `libtool'.
+# to write the compiler configuration to 'libtool'.
m4_defun([_LT_LANG_FC_CONFIG],
-[AC_REQUIRE([_LT_PROG_FC])dnl
-AC_LANG_PUSH(Fortran)
+[AC_LANG_PUSH(Fortran)
+if test -z "$FC" || test no = "$FC"; then
+ _lt_disable_FC=yes
+fi
+
_LT_TAGVAR(archive_cmds_need_lc, $1)=no
_LT_TAGVAR(allow_undefined_flag, $1)=
_LT_TAGVAR(always_export_symbols, $1)=no
@@ -6735,7 +7802,6 @@
_LT_TAGVAR(hardcode_direct, $1)=no
_LT_TAGVAR(hardcode_direct_absolute, $1)=no
_LT_TAGVAR(hardcode_libdir_flag_spec, $1)=
-_LT_TAGVAR(hardcode_libdir_flag_spec_ld, $1)=
_LT_TAGVAR(hardcode_libdir_separator, $1)=
_LT_TAGVAR(hardcode_minus_L, $1)=no
_LT_TAGVAR(hardcode_automatic, $1)=no
@@ -6744,6 +7810,8 @@
_LT_TAGVAR(module_expsym_cmds, $1)=
_LT_TAGVAR(link_all_deplibs, $1)=unknown
_LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds
+_LT_TAGVAR(reload_flag, $1)=$reload_flag
+_LT_TAGVAR(reload_cmds, $1)=$reload_cmds
_LT_TAGVAR(no_undefined_flag, $1)=
_LT_TAGVAR(whole_archive_flag_spec, $1)=
_LT_TAGVAR(enable_shared_with_static_runtimes, $1)=no
@@ -6759,7 +7827,7 @@
# the FC compiler isn't working. Some variables (like enable_shared)
# are currently assumed to apply to all compilers on this platform,
# and will be corrupted by setting them based on a non-working compiler.
-if test "$_lt_disable_FC" != yes; then
+if test yes != "$_lt_disable_FC"; then
# Code to be used in simple compile tests
lt_simple_compile_test_code="\
subroutine t
@@ -6781,9 +7849,11 @@
_LT_LINKER_BOILERPLATE
# Allow CC to be a program name with arguments.
- lt_save_CC="$CC"
+ lt_save_CC=$CC
lt_save_GCC=$GCC
+ lt_save_CFLAGS=$CFLAGS
CC=${FC-"f95"}
+ CFLAGS=$FCFLAGS
compiler=$CC
GCC=$ac_cv_fc_compiler_gnu
@@ -6795,13 +7865,13 @@
AC_MSG_RESULT([$can_build_shared])
AC_MSG_CHECKING([whether to build shared libraries])
- test "$can_build_shared" = "no" && enable_shared=no
+ test no = "$can_build_shared" && enable_shared=no
# On AIX, shared libraries and static libraries use the same namespace, and
# are all built from PIC.
case $host_os in
aix3*)
- test "$enable_shared" = yes && enable_static=no
+ test yes = "$enable_shared" && enable_static=no
if test -n "$RANLIB"; then
archive_cmds="$archive_cmds~\$RANLIB \$lib"
postinstall_cmds='$RANLIB $lib'
@@ -6808,8 +7878,12 @@
fi
;;
aix[[4-9]]*)
- if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then
- test "$enable_shared" = yes && enable_static=no
+ if test ia64 != "$host_cpu"; then
+ case $enable_shared,$with_aix_soname,$aix_use_runtimelinking in
+ yes,aix,yes) ;; # shared object as lib.so file only
+ yes,svr4,*) ;; # shared object as lib.so archive member only
+ yes,*) enable_static=no ;; # shared object in lib.a archive as well
+ esac
fi
;;
esac
@@ -6817,11 +7891,11 @@
AC_MSG_CHECKING([whether to build static libraries])
# Make sure either enable_shared or enable_static is yes.
- test "$enable_shared" = yes || enable_static=yes
+ test yes = "$enable_shared" || enable_static=yes
AC_MSG_RESULT([$enable_static])
- _LT_TAGVAR(GCC, $1)="$ac_cv_fc_compiler_gnu"
- _LT_TAGVAR(LD, $1)="$LD"
+ _LT_TAGVAR(GCC, $1)=$ac_cv_fc_compiler_gnu
+ _LT_TAGVAR(LD, $1)=$LD
## CAVEAT EMPTOR:
## There is no encapsulation within the following macros, do not change
@@ -6839,8 +7913,9 @@
fi # test -n "$compiler"
GCC=$lt_save_GCC
- CC="$lt_save_CC"
-fi # test "$_lt_disable_FC" != yes
+ CC=$lt_save_CC
+ CFLAGS=$lt_save_CFLAGS
+fi # test yes != "$_lt_disable_FC"
AC_LANG_POP
])# _LT_LANG_FC_CONFIG
@@ -6850,7 +7925,7 @@
# --------------------------
# Ensure that the configuration variables for the GNU Java Compiler compiler
# are suitably defined. These variables are subsequently used by _LT_CONFIG
-# to write the compiler configuration to `libtool'.
+# to write the compiler configuration to 'libtool'.
m4_defun([_LT_LANG_GCJ_CONFIG],
[AC_REQUIRE([LT_PROG_GCJ])dnl
AC_LANG_SAVE
@@ -6876,13 +7951,15 @@
_LT_LINKER_BOILERPLATE
# Allow CC to be a program name with arguments.
-lt_save_CC="$CC"
+lt_save_CC=$CC
+lt_save_CFLAGS=$CFLAGS
lt_save_GCC=$GCC
GCC=yes
CC=${GCJ-"gcj"}
+CFLAGS=$GCJFLAGS
compiler=$CC
_LT_TAGVAR(compiler, $1)=$CC
-_LT_TAGVAR(LD, $1)="$LD"
+_LT_TAGVAR(LD, $1)=$LD
_LT_CC_BASENAME([$compiler])
# GCJ did not exist at the time GCC didn't implicitly link libc in.
@@ -6889,6 +7966,8 @@
_LT_TAGVAR(archive_cmds_need_lc, $1)=no
_LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds
+_LT_TAGVAR(reload_flag, $1)=$reload_flag
+_LT_TAGVAR(reload_cmds, $1)=$reload_cmds
## CAVEAT EMPTOR:
## There is no encapsulation within the following macros, do not change
@@ -6908,15 +7987,87 @@
AC_LANG_RESTORE
GCC=$lt_save_GCC
-CC="$lt_save_CC"
+CC=$lt_save_CC
+CFLAGS=$lt_save_CFLAGS
])# _LT_LANG_GCJ_CONFIG
+# _LT_LANG_GO_CONFIG([TAG])
+# --------------------------
+# Ensure that the configuration variables for the GNU Go compiler
+# are suitably defined. These variables are subsequently used by _LT_CONFIG
+# to write the compiler configuration to 'libtool'.
+m4_defun([_LT_LANG_GO_CONFIG],
+[AC_REQUIRE([LT_PROG_GO])dnl
+AC_LANG_SAVE
+
+# Source file extension for Go test sources.
+ac_ext=go
+
+# Object file extension for compiled Go test sources.
+objext=o
+_LT_TAGVAR(objext, $1)=$objext
+
+# Code to be used in simple compile tests
+lt_simple_compile_test_code="package main; func main() { }"
+
+# Code to be used in simple link tests
+lt_simple_link_test_code='package main; func main() { }'
+
+# ltmain only uses $CC for tagged configurations so make sure $CC is set.
+_LT_TAG_COMPILER
+
+# save warnings/boilerplate of simple test code
+_LT_COMPILER_BOILERPLATE
+_LT_LINKER_BOILERPLATE
+
+# Allow CC to be a program name with arguments.
+lt_save_CC=$CC
+lt_save_CFLAGS=$CFLAGS
+lt_save_GCC=$GCC
+GCC=yes
+CC=${GOC-"gccgo"}
+CFLAGS=$GOFLAGS
+compiler=$CC
+_LT_TAGVAR(compiler, $1)=$CC
+_LT_TAGVAR(LD, $1)=$LD
+_LT_CC_BASENAME([$compiler])
+
+# Go did not exist at the time GCC didn't implicitly link libc in.
+_LT_TAGVAR(archive_cmds_need_lc, $1)=no
+
+_LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds
+_LT_TAGVAR(reload_flag, $1)=$reload_flag
+_LT_TAGVAR(reload_cmds, $1)=$reload_cmds
+
+## CAVEAT EMPTOR:
+## There is no encapsulation within the following macros, do not change
+## the running order or otherwise move them around unless you know exactly
+## what you are doing...
+if test -n "$compiler"; then
+ _LT_COMPILER_NO_RTTI($1)
+ _LT_COMPILER_PIC($1)
+ _LT_COMPILER_C_O($1)
+ _LT_COMPILER_FILE_LOCKS($1)
+ _LT_LINKER_SHLIBS($1)
+ _LT_LINKER_HARDCODE_LIBPATH($1)
+
+ _LT_CONFIG($1)
+fi
+
+AC_LANG_RESTORE
+
+GCC=$lt_save_GCC
+CC=$lt_save_CC
+CFLAGS=$lt_save_CFLAGS
+])# _LT_LANG_GO_CONFIG
+
+
# _LT_LANG_RC_CONFIG([TAG])
# -------------------------
# Ensure that the configuration variables for the Windows resource compiler
# are suitably defined. These variables are subsequently used by _LT_CONFIG
-# to write the compiler configuration to `libtool'.
+# to write the compiler configuration to 'libtool'.
m4_defun([_LT_LANG_RC_CONFIG],
[AC_REQUIRE([LT_PROG_RC])dnl
AC_LANG_SAVE
@@ -6932,7 +8083,7 @@
lt_simple_compile_test_code='sample MENU { MENUITEM "&Soup", 100, CHECKED }'
# Code to be used in simple link tests
-lt_simple_link_test_code="$lt_simple_compile_test_code"
+lt_simple_link_test_code=$lt_simple_compile_test_code
# ltmain only uses $CC for tagged configurations so make sure $CC is set.
_LT_TAG_COMPILER
@@ -6942,10 +8093,12 @@
_LT_LINKER_BOILERPLATE
# Allow CC to be a program name with arguments.
-lt_save_CC="$CC"
+lt_save_CC=$CC
+lt_save_CFLAGS=$CFLAGS
lt_save_GCC=$GCC
GCC=
CC=${RC-"windres"}
+CFLAGS=
compiler=$CC
_LT_TAGVAR(compiler, $1)=$CC
_LT_CC_BASENAME([$compiler])
@@ -6958,7 +8111,8 @@
GCC=$lt_save_GCC
AC_LANG_RESTORE
-CC="$lt_save_CC"
+CC=$lt_save_CC
+CFLAGS=$lt_save_CFLAGS
])# _LT_LANG_RC_CONFIG
@@ -6968,7 +8122,7 @@
[m4_ifdef([AC_PROG_GCJ], [AC_PROG_GCJ],
[m4_ifdef([A][M_PROG_GCJ], [A][M_PROG_GCJ],
[AC_CHECK_TOOL(GCJ, gcj,)
- test "x${GCJFLAGS+set}" = xset || GCJFLAGS="-g -O2"
+ test set = "${GCJFLAGS+set}" || GCJFLAGS="-g -O2"
AC_SUBST(GCJFLAGS)])])[]dnl
])
@@ -6978,6 +8132,13 @@
dnl AC_DEFUN([LT_AC_PROG_GCJ], [])
+# LT_PROG_GO
+# ----------
+AC_DEFUN([LT_PROG_GO],
+[AC_CHECK_TOOL(GOC, gccgo,)
+])
+
+
# LT_PROG_RC
# ----------
AC_DEFUN([LT_PROG_RC],
@@ -7017,6 +8178,15 @@
AC_SUBST([OBJDUMP])
])
+# _LT_DECL_DLLTOOL
+# ----------------
+# Ensure DLLTOOL variable is set.
+m4_defun([_LT_DECL_DLLTOOL],
+[AC_CHECK_TOOL(DLLTOOL, dlltool, false)
+test -z "$DLLTOOL" && DLLTOOL=dlltool
+_LT_DECL([], [DLLTOOL], [1], [DLL creation program])
+AC_SUBST([DLLTOOL])
+])
# _LT_DECL_SED
# ------------
@@ -7063,7 +8233,7 @@
# Add /usr/xpg4/bin/sed as it is typically found on Solaris
# along with /bin/sed that truncates output.
for lt_ac_sed in $lt_ac_sed_list /usr/xpg4/bin/sed; do
- test ! -f $lt_ac_sed && continue
+ test ! -f "$lt_ac_sed" && continue
cat /dev/null > conftest.in
lt_ac_count=0
echo $ECHO_N "0123456789$ECHO_C" >conftest.in
@@ -7080,9 +8250,9 @@
$lt_ac_sed -e 's/a$//' < conftest.nl >conftest.out || break
cmp -s conftest.out conftest.nl || break
# 10000 chars as input seems more than enough
- test $lt_ac_count -gt 10 && break
+ test 10 -lt "$lt_ac_count" && break
lt_ac_count=`expr $lt_ac_count + 1`
- if test $lt_ac_count -gt $lt_ac_max; then
+ if test "$lt_ac_count" -gt "$lt_ac_max"; then
lt_ac_max=$lt_ac_count
lt_cv_path_SED=$lt_ac_sed
fi
@@ -7106,27 +8276,7 @@
# Find out whether the shell is Bourne or XSI compatible,
# or has some other useful features.
m4_defun([_LT_CHECK_SHELL_FEATURES],
-[AC_MSG_CHECKING([whether the shell understands some XSI constructs])
-# Try some XSI features
-xsi_shell=no
-( _lt_dummy="a/b/c"
- test "${_lt_dummy##*/},${_lt_dummy%/*},"${_lt_dummy%"$_lt_dummy"}, \
- = c,a/b,, \
- && eval 'test $(( 1 + 1 )) -eq 2 \
- && test "${#_lt_dummy}" -eq 5' ) >/dev/null 2>&1 \
- && xsi_shell=yes
-AC_MSG_RESULT([$xsi_shell])
-_LT_CONFIG_LIBTOOL_INIT([xsi_shell='$xsi_shell'])
-
-AC_MSG_CHECKING([whether the shell understands "+="])
-lt_shell_append=no
-( foo=bar; set foo baz; eval "$[1]+=\$[2]" && test "$foo" = barbaz ) \
- >/dev/null 2>&1 \
- && lt_shell_append=yes
-AC_MSG_RESULT([$lt_shell_append])
-_LT_CONFIG_LIBTOOL_INIT([lt_shell_append='$lt_shell_append'])
-
-if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then
+[if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then
lt_unset=unset
else
lt_unset=false
@@ -7150,208 +8300,69 @@
])# _LT_CHECK_SHELL_FEATURES
-# _LT_PROG_XSI_SHELLFNS
-# ---------------------
-# Bourne and XSI compatible variants of some useful shell functions.
-m4_defun([_LT_PROG_XSI_SHELLFNS],
-[case $xsi_shell in
- yes)
- cat << \_LT_EOF >> "$cfgfile"
-
-# func_dirname file append nondir_replacement
-# Compute the dirname of FILE. If nonempty, add APPEND to the result,
-# otherwise set result to NONDIR_REPLACEMENT.
-func_dirname ()
-{
- case ${1} in
- */*) func_dirname_result="${1%/*}${2}" ;;
- * ) func_dirname_result="${3}" ;;
- esac
-}
-
-# func_basename file
-func_basename ()
-{
- func_basename_result="${1##*/}"
-}
-
-# func_dirname_and_basename file append nondir_replacement
-# perform func_basename and func_dirname in a single function
-# call:
-# dirname: Compute the dirname of FILE. If nonempty,
-# add APPEND to the result, otherwise set result
-# to NONDIR_REPLACEMENT.
-# value returned in "$func_dirname_result"
-# basename: Compute filename of FILE.
-# value retuned in "$func_basename_result"
-# Implementation must be kept synchronized with func_dirname
-# and func_basename. For efficiency, we do not delegate to
-# those functions but instead duplicate the functionality here.
-func_dirname_and_basename ()
-{
- case ${1} in
- */*) func_dirname_result="${1%/*}${2}" ;;
- * ) func_dirname_result="${3}" ;;
- esac
- func_basename_result="${1##*/}"
-}
-
-# func_stripname prefix suffix name
-# strip PREFIX and SUFFIX off of NAME.
-# PREFIX and SUFFIX must not contain globbing or regex special
-# characters, hashes, percent signs, but SUFFIX may contain a leading
-# dot (in which case that matches only a dot).
-func_stripname ()
-{
- # pdksh 5.2.14 does not do ${X%$Y} correctly if both X and Y are
- # positional parameters, so assign one to ordinary parameter first.
- func_stripname_result=${3}
- func_stripname_result=${func_stripname_result#"${1}"}
- func_stripname_result=${func_stripname_result%"${2}"}
-}
-
-# func_opt_split
-func_opt_split ()
-{
- func_opt_split_opt=${1%%=*}
- func_opt_split_arg=${1#*=}
-}
-
-# func_lo2o object
-func_lo2o ()
-{
- case ${1} in
- *.lo) func_lo2o_result=${1%.lo}.${objext} ;;
- *) func_lo2o_result=${1} ;;
- esac
-}
-
-# func_xform libobj-or-source
-func_xform ()
-{
- func_xform_result=${1%.*}.lo
-}
-
-# func_arith arithmetic-term...
-func_arith ()
-{
- func_arith_result=$(( $[*] ))
-}
-
-# func_len string
-# STRING may not start with a hyphen.
-func_len ()
-{
- func_len_result=${#1}
-}
-
-_LT_EOF
+# _LT_PATH_CONVERSION_FUNCTIONS
+# -----------------------------
+# Determine what file name conversion functions should be used by
+# func_to_host_file (and, implicitly, by func_to_host_path). These are needed
+# for certain cross-compile configurations and native mingw.
+m4_defun([_LT_PATH_CONVERSION_FUNCTIONS],
+[AC_REQUIRE([AC_CANONICAL_HOST])dnl
+AC_REQUIRE([AC_CANONICAL_BUILD])dnl
+AC_MSG_CHECKING([how to convert $build file names to $host format])
+AC_CACHE_VAL(lt_cv_to_host_file_cmd,
+[case $host in
+ *-*-mingw* )
+ case $build in
+ *-*-mingw* ) # actually msys
+ lt_cv_to_host_file_cmd=func_convert_file_msys_to_w32
+ ;;
+ *-*-cygwin* )
+ lt_cv_to_host_file_cmd=func_convert_file_cygwin_to_w32
+ ;;
+ * ) # otherwise, assume *nix
+ lt_cv_to_host_file_cmd=func_convert_file_nix_to_w32
+ ;;
+ esac
;;
- *) # Bourne compatible functions.
- cat << \_LT_EOF >> "$cfgfile"
-
-# func_dirname file append nondir_replacement
-# Compute the dirname of FILE. If nonempty, add APPEND to the result,
-# otherwise set result to NONDIR_REPLACEMENT.
-func_dirname ()
-{
- # Extract subdirectory from the argument.
- func_dirname_result=`$ECHO "X${1}" | $Xsed -e "$dirname"`
- if test "X$func_dirname_result" = "X${1}"; then
- func_dirname_result="${3}"
- else
- func_dirname_result="$func_dirname_result${2}"
- fi
-}
-
-# func_basename file
-func_basename ()
-{
- func_basename_result=`$ECHO "X${1}" | $Xsed -e "$basename"`
-}
-
-dnl func_dirname_and_basename
-dnl A portable version of this function is already defined in general.m4sh
-dnl so there is no need for it here.
-
-# func_stripname prefix suffix name
-# strip PREFIX and SUFFIX off of NAME.
-# PREFIX and SUFFIX must not contain globbing or regex special
-# characters, hashes, percent signs, but SUFFIX may contain a leading
-# dot (in which case that matches only a dot).
-# func_strip_suffix prefix name
-func_stripname ()
-{
- case ${2} in
- .*) func_stripname_result=`$ECHO "X${3}" \
- | $Xsed -e "s%^${1}%%" -e "s%\\\\${2}\$%%"`;;
- *) func_stripname_result=`$ECHO "X${3}" \
- | $Xsed -e "s%^${1}%%" -e "s%${2}\$%%"`;;
- esac
-}
-
-# sed scripts:
-my_sed_long_opt='1s/^\(-[[^=]]*\)=.*/\1/;q'
-my_sed_long_arg='1s/^-[[^=]]*=//'
-
-# func_opt_split
-func_opt_split ()
-{
- func_opt_split_opt=`$ECHO "X${1}" | $Xsed -e "$my_sed_long_opt"`
- func_opt_split_arg=`$ECHO "X${1}" | $Xsed -e "$my_sed_long_arg"`
-}
-
-# func_lo2o object
-func_lo2o ()
-{
- func_lo2o_result=`$ECHO "X${1}" | $Xsed -e "$lo2o"`
-}
-
-# func_xform libobj-or-source
-func_xform ()
-{
- func_xform_result=`$ECHO "X${1}" | $Xsed -e 's/\.[[^.]]*$/.lo/'`
-}
-
-# func_arith arithmetic-term...
-func_arith ()
-{
- func_arith_result=`expr "$[@]"`
-}
-
-# func_len string
-# STRING may not start with a hyphen.
-func_len ()
-{
- func_len_result=`expr "$[1]" : ".*" 2>/dev/null || echo $max_cmd_len`
-}
-
-_LT_EOF
+ *-*-cygwin* )
+ case $build in
+ *-*-mingw* ) # actually msys
+ lt_cv_to_host_file_cmd=func_convert_file_msys_to_cygwin
+ ;;
+ *-*-cygwin* )
+ lt_cv_to_host_file_cmd=func_convert_file_noop
+ ;;
+ * ) # otherwise, assume *nix
+ lt_cv_to_host_file_cmd=func_convert_file_nix_to_cygwin
+ ;;
+ esac
+ ;;
+ * ) # unhandled hosts (and "normal" native builds)
+ lt_cv_to_host_file_cmd=func_convert_file_noop
+ ;;
esac
+])
+to_host_file_cmd=$lt_cv_to_host_file_cmd
+AC_MSG_RESULT([$lt_cv_to_host_file_cmd])
+_LT_DECL([to_host_file_cmd], [lt_cv_to_host_file_cmd],
+ [0], [convert $build file names to $host format])dnl
-case $lt_shell_append in
- yes)
- cat << \_LT_EOF >> "$cfgfile"
-
-# func_append var value
-# Append VALUE to the end of shell variable VAR.
-func_append ()
-{
- eval "$[1]+=\$[2]"
-}
-_LT_EOF
+AC_MSG_CHECKING([how to convert $build file names to toolchain format])
+AC_CACHE_VAL(lt_cv_to_tool_file_cmd,
+[#assume ordinary cross tools, or native build.
+lt_cv_to_tool_file_cmd=func_convert_file_noop
+case $host in
+ *-*-mingw* )
+ case $build in
+ *-*-mingw* ) # actually msys
+ lt_cv_to_tool_file_cmd=func_convert_file_msys_to_w32
+ ;;
+ esac
;;
- *)
- cat << \_LT_EOF >> "$cfgfile"
-
-# func_append var value
-# Append VALUE to the end of shell variable VAR.
-func_append ()
-{
- eval "$[1]=\$$[1]\$[2]"
-}
-
-_LT_EOF
- ;;
- esac
+esac
])
+to_tool_file_cmd=$lt_cv_to_tool_file_cmd
+AC_MSG_RESULT([$lt_cv_to_tool_file_cmd])
+_LT_DECL([to_tool_file_cmd], [lt_cv_to_tool_file_cmd],
+ [0], [convert $build files to toolchain format])dnl
+])# _LT_PATH_CONVERSION_FUNCTIONS
Modified: trunk/Build/source/libs/zziplib/zziplib-src/m4/ltoptions.m4
===================================================================
--- trunk/Build/source/libs/zziplib/zziplib-src/m4/ltoptions.m4 2018-03-17 22:23:43 UTC (rev 47003)
+++ trunk/Build/source/libs/zziplib/zziplib-src/m4/ltoptions.m4 2018-03-18 00:25:18 UTC (rev 47004)
@@ -1,6 +1,7 @@
# Helper functions for option handling. -*- Autoconf -*-
#
-# Copyright (C) 2004, 2005, 2007, 2008 Free Software Foundation, Inc.
+# Copyright (C) 2004-2005, 2007-2009, 2011-2015 Free Software
+# Foundation, Inc.
# Written by Gary V. Vaughan, 2004
#
# This file is free software; the Free Software Foundation gives
@@ -7,7 +8,7 @@
# unlimited permission to copy and/or distribute it, with or without
# modifications, as long as this notice is preserved.
-# serial 6 ltoptions.m4
+# serial 8 ltoptions.m4
# This is to help aclocal find these macros, as it can't see m4_define.
AC_DEFUN([LTOPTIONS_VERSION], [m4_if([1])])
@@ -28,7 +29,7 @@
[m4_define(_LT_MANGLE_OPTION([$1], [$2]))dnl
m4_ifdef(_LT_MANGLE_DEFUN([$1], [$2]),
_LT_MANGLE_DEFUN([$1], [$2]),
- [m4_warning([Unknown $1 option `$2'])])[]dnl
+ [m4_warning([Unknown $1 option '$2'])])[]dnl
])
@@ -74,13 +75,15 @@
dnl
dnl If no reference was made to various pairs of opposing options, then
dnl we run the default mode handler for the pair. For example, if neither
- dnl `shared' nor `disable-shared' was passed, we enable building of shared
+ dnl 'shared' nor 'disable-shared' was passed, we enable building of shared
dnl archives by default:
_LT_UNLESS_OPTIONS([LT_INIT], [shared disable-shared], [_LT_ENABLE_SHARED])
_LT_UNLESS_OPTIONS([LT_INIT], [static disable-static], [_LT_ENABLE_STATIC])
_LT_UNLESS_OPTIONS([LT_INIT], [pic-only no-pic], [_LT_WITH_PIC])
_LT_UNLESS_OPTIONS([LT_INIT], [fast-install disable-fast-install],
- [_LT_ENABLE_FAST_INSTALL])
+ [_LT_ENABLE_FAST_INSTALL])
+ _LT_UNLESS_OPTIONS([LT_INIT], [aix-soname=aix aix-soname=both aix-soname=svr4],
+ [_LT_WITH_AIX_SONAME([aix])])
])
])# _LT_SET_OPTIONS
@@ -111,7 +114,7 @@
[_LT_SET_OPTION([LT_INIT], [dlopen])
AC_DIAGNOSE([obsolete],
[$0: Remove this warning and the call to _LT_SET_OPTION when you
-put the `dlopen' option into LT_INIT's first parameter.])
+put the 'dlopen' option into LT_INIT's first parameter.])
])
dnl aclocal-1.4 backwards compatibility:
@@ -125,7 +128,7 @@
[enable_win32_dll=yes
case $host in
-*-*-cygwin* | *-*-mingw* | *-*-pw32* | *-cegcc*)
+*-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-cegcc*)
AC_CHECK_TOOL(AS, as, false)
AC_CHECK_TOOL(DLLTOOL, dlltool, false)
AC_CHECK_TOOL(OBJDUMP, objdump, false)
@@ -133,13 +136,13 @@
esac
test -z "$AS" && AS=as
-_LT_DECL([], [AS], [0], [Assembler program])dnl
+_LT_DECL([], [AS], [1], [Assembler program])dnl
test -z "$DLLTOOL" && DLLTOOL=dlltool
-_LT_DECL([], [DLLTOOL], [0], [DLL creation program])dnl
+_LT_DECL([], [DLLTOOL], [1], [DLL creation program])dnl
test -z "$OBJDUMP" && OBJDUMP=objdump
-_LT_DECL([], [OBJDUMP], [0], [Object dumper program])dnl
+_LT_DECL([], [OBJDUMP], [1], [Object dumper program])dnl
])# win32-dll
AU_DEFUN([AC_LIBTOOL_WIN32_DLL],
@@ -147,7 +150,7 @@
_LT_SET_OPTION([LT_INIT], [win32-dll])
AC_DIAGNOSE([obsolete],
[$0: Remove this warning and the call to _LT_SET_OPTION when you
-put the `win32-dll' option into LT_INIT's first parameter.])
+put the 'win32-dll' option into LT_INIT's first parameter.])
])
dnl aclocal-1.4 backwards compatibility:
@@ -156,9 +159,9 @@
# _LT_ENABLE_SHARED([DEFAULT])
# ----------------------------
-# implement the --enable-shared flag, and supports the `shared' and
-# `disable-shared' LT_INIT options.
-# DEFAULT is either `yes' or `no'. If omitted, it defaults to `yes'.
+# implement the --enable-shared flag, and supports the 'shared' and
+# 'disable-shared' LT_INIT options.
+# DEFAULT is either 'yes' or 'no'. If omitted, it defaults to 'yes'.
m4_define([_LT_ENABLE_SHARED],
[m4_define([_LT_ENABLE_SHARED_DEFAULT], [m4_if($1, no, no, yes)])dnl
AC_ARG_ENABLE([shared],
@@ -171,14 +174,14 @@
*)
enable_shared=no
# Look at the argument we got. We use all the common list separators.
- lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
+ lt_save_ifs=$IFS; IFS=$IFS$PATH_SEPARATOR,
for pkg in $enableval; do
- IFS="$lt_save_ifs"
+ IFS=$lt_save_ifs
if test "X$pkg" = "X$p"; then
enable_shared=yes
fi
done
- IFS="$lt_save_ifs"
+ IFS=$lt_save_ifs
;;
esac],
[enable_shared=]_LT_ENABLE_SHARED_DEFAULT)
@@ -210,9 +213,9 @@
# _LT_ENABLE_STATIC([DEFAULT])
# ----------------------------
-# implement the --enable-static flag, and support the `static' and
-# `disable-static' LT_INIT options.
-# DEFAULT is either `yes' or `no'. If omitted, it defaults to `yes'.
+# implement the --enable-static flag, and support the 'static' and
+# 'disable-static' LT_INIT options.
+# DEFAULT is either 'yes' or 'no'. If omitted, it defaults to 'yes'.
m4_define([_LT_ENABLE_STATIC],
[m4_define([_LT_ENABLE_STATIC_DEFAULT], [m4_if($1, no, no, yes)])dnl
AC_ARG_ENABLE([static],
@@ -225,14 +228,14 @@
*)
enable_static=no
# Look at the argument we got. We use all the common list separators.
- lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
+ lt_save_ifs=$IFS; IFS=$IFS$PATH_SEPARATOR,
for pkg in $enableval; do
- IFS="$lt_save_ifs"
+ IFS=$lt_save_ifs
if test "X$pkg" = "X$p"; then
enable_static=yes
fi
done
- IFS="$lt_save_ifs"
+ IFS=$lt_save_ifs
;;
esac],
[enable_static=]_LT_ENABLE_STATIC_DEFAULT)
@@ -264,9 +267,9 @@
# _LT_ENABLE_FAST_INSTALL([DEFAULT])
# ----------------------------------
-# implement the --enable-fast-install flag, and support the `fast-install'
-# and `disable-fast-install' LT_INIT options.
-# DEFAULT is either `yes' or `no'. If omitted, it defaults to `yes'.
+# implement the --enable-fast-install flag, and support the 'fast-install'
+# and 'disable-fast-install' LT_INIT options.
+# DEFAULT is either 'yes' or 'no'. If omitted, it defaults to 'yes'.
m4_define([_LT_ENABLE_FAST_INSTALL],
[m4_define([_LT_ENABLE_FAST_INSTALL_DEFAULT], [m4_if($1, no, no, yes)])dnl
AC_ARG_ENABLE([fast-install],
@@ -279,14 +282,14 @@
*)
enable_fast_install=no
# Look at the argument we got. We use all the common list separators.
- lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
+ lt_save_ifs=$IFS; IFS=$IFS$PATH_SEPARATOR,
for pkg in $enableval; do
- IFS="$lt_save_ifs"
+ IFS=$lt_save_ifs
if test "X$pkg" = "X$p"; then
enable_fast_install=yes
fi
done
- IFS="$lt_save_ifs"
+ IFS=$lt_save_ifs
;;
esac],
[enable_fast_install=]_LT_ENABLE_FAST_INSTALL_DEFAULT)
@@ -303,7 +306,7 @@
[_LT_SET_OPTION([LT_INIT], m4_if([$1], [no], [disable-])[fast-install])
AC_DIAGNOSE([obsolete],
[$0: Remove this warning and the call to _LT_SET_OPTION when you put
-the `fast-install' option into LT_INIT's first parameter.])
+the 'fast-install' option into LT_INIT's first parameter.])
])
AU_DEFUN([AC_DISABLE_FAST_INSTALL],
@@ -310,7 +313,7 @@
[_LT_SET_OPTION([LT_INIT], [disable-fast-install])
AC_DIAGNOSE([obsolete],
[$0: Remove this warning and the call to _LT_SET_OPTION when you put
-the `disable-fast-install' option into LT_INIT's first parameter.])
+the 'disable-fast-install' option into LT_INIT's first parameter.])
])
dnl aclocal-1.4 backwards compatibility:
@@ -318,20 +321,86 @@
dnl AC_DEFUN([AM_DISABLE_FAST_INSTALL], [])
+# _LT_WITH_AIX_SONAME([DEFAULT])
+# ----------------------------------
+# implement the --with-aix-soname flag, and support the `aix-soname=aix'
+# and `aix-soname=both' and `aix-soname=svr4' LT_INIT options. DEFAULT
+# is either `aix', `both' or `svr4'. If omitted, it defaults to `aix'.
+m4_define([_LT_WITH_AIX_SONAME],
+[m4_define([_LT_WITH_AIX_SONAME_DEFAULT], [m4_if($1, svr4, svr4, m4_if($1, both, both, aix))])dnl
+shared_archive_member_spec=
+case $host,$enable_shared in
+power*-*-aix[[5-9]]*,yes)
+ AC_MSG_CHECKING([which variant of shared library versioning to provide])
+ AC_ARG_WITH([aix-soname],
+ [AS_HELP_STRING([--with-aix-soname=aix|svr4|both],
+ [shared library versioning (aka "SONAME") variant to provide on AIX, @<:@default=]_LT_WITH_AIX_SONAME_DEFAULT[@:>@.])],
+ [case $withval in
+ aix|svr4|both)
+ ;;
+ *)
+ AC_MSG_ERROR([Unknown argument to --with-aix-soname])
+ ;;
+ esac
+ lt_cv_with_aix_soname=$with_aix_soname],
+ [AC_CACHE_VAL([lt_cv_with_aix_soname],
+ [lt_cv_with_aix_soname=]_LT_WITH_AIX_SONAME_DEFAULT)
+ with_aix_soname=$lt_cv_with_aix_soname])
+ AC_MSG_RESULT([$with_aix_soname])
+ if test aix != "$with_aix_soname"; then
+ # For the AIX way of multilib, we name the shared archive member
+ # based on the bitwidth used, traditionally 'shr.o' or 'shr_64.o',
+ # and 'shr.imp' or 'shr_64.imp', respectively, for the Import File.
+ # Even when GNU compilers ignore OBJECT_MODE but need '-maix64' flag,
+ # the AIX toolchain works better with OBJECT_MODE set (default 32).
+ if test 64 = "${OBJECT_MODE-32}"; then
+ shared_archive_member_spec=shr_64
+ else
+ shared_archive_member_spec=shr
+ fi
+ fi
+ ;;
+*)
+ with_aix_soname=aix
+ ;;
+esac
+
+_LT_DECL([], [shared_archive_member_spec], [0],
+ [Shared archive member basename, for filename based shared library versioning on AIX])dnl
+])# _LT_WITH_AIX_SONAME
+
+LT_OPTION_DEFINE([LT_INIT], [aix-soname=aix], [_LT_WITH_AIX_SONAME([aix])])
+LT_OPTION_DEFINE([LT_INIT], [aix-soname=both], [_LT_WITH_AIX_SONAME([both])])
+LT_OPTION_DEFINE([LT_INIT], [aix-soname=svr4], [_LT_WITH_AIX_SONAME([svr4])])
+
+
# _LT_WITH_PIC([MODE])
# --------------------
-# implement the --with-pic flag, and support the `pic-only' and `no-pic'
+# implement the --with-pic flag, and support the 'pic-only' and 'no-pic'
# LT_INIT options.
-# MODE is either `yes' or `no'. If omitted, it defaults to `both'.
+# MODE is either 'yes' or 'no'. If omitted, it defaults to 'both'.
m4_define([_LT_WITH_PIC],
[AC_ARG_WITH([pic],
- [AS_HELP_STRING([--with-pic],
+ [AS_HELP_STRING([--with-pic@<:@=PKGS@:>@],
[try to use only PIC/non-PIC objects @<:@default=use both@:>@])],
- [pic_mode="$withval"],
- [pic_mode=default])
+ [lt_p=${PACKAGE-default}
+ case $withval in
+ yes|no) pic_mode=$withval ;;
+ *)
+ pic_mode=default
+ # Look at the argument we got. We use all the common list separators.
+ lt_save_ifs=$IFS; IFS=$IFS$PATH_SEPARATOR,
+ for lt_pkg in $withval; do
+ IFS=$lt_save_ifs
+ if test "X$lt_pkg" = "X$lt_p"; then
+ pic_mode=yes
+ fi
+ done
+ IFS=$lt_save_ifs
+ ;;
+ esac],
+ [pic_mode=m4_default([$1], [default])])
-test -z "$pic_mode" && pic_mode=m4_default([$1], [default])
-
_LT_DECL([], [pic_mode], [0], [What type of objects to build])dnl
])# _LT_WITH_PIC
@@ -343,7 +412,7 @@
[_LT_SET_OPTION([LT_INIT], [pic-only])
AC_DIAGNOSE([obsolete],
[$0: Remove this warning and the call to _LT_SET_OPTION when you
-put the `pic-only' option into LT_INIT's first parameter.])
+put the 'pic-only' option into LT_INIT's first parameter.])
])
dnl aclocal-1.4 backwards compatibility:
Modified: trunk/Build/source/libs/zziplib/zziplib-src/m4/ltsugar.m4
===================================================================
--- trunk/Build/source/libs/zziplib/zziplib-src/m4/ltsugar.m4 2018-03-17 22:23:43 UTC (rev 47003)
+++ trunk/Build/source/libs/zziplib/zziplib-src/m4/ltsugar.m4 2018-03-18 00:25:18 UTC (rev 47004)
@@ -1,6 +1,7 @@
# ltsugar.m4 -- libtool m4 base layer. -*-Autoconf-*-
#
-# Copyright (C) 2004, 2005, 2007, 2008 Free Software Foundation, Inc.
+# Copyright (C) 2004-2005, 2007-2008, 2011-2015 Free Software
+# Foundation, Inc.
# Written by Gary V. Vaughan, 2004
#
# This file is free software; the Free Software Foundation gives
@@ -33,7 +34,7 @@
# ------------
# Manipulate m4 lists.
# These macros are necessary as long as will still need to support
-# Autoconf-2.59 which quotes differently.
+# Autoconf-2.59, which quotes differently.
m4_define([lt_car], [[$1]])
m4_define([lt_cdr],
[m4_if([$#], 0, [m4_fatal([$0: cannot be called without arguments])],
@@ -44,7 +45,7 @@
# lt_append(MACRO-NAME, STRING, [SEPARATOR])
# ------------------------------------------
-# Redefine MACRO-NAME to hold its former content plus `SEPARATOR'`STRING'.
+# Redefine MACRO-NAME to hold its former content plus 'SEPARATOR''STRING'.
# Note that neither SEPARATOR nor STRING are expanded; they are appended
# to MACRO-NAME as is (leaving the expansion for when MACRO-NAME is invoked).
# No SEPARATOR is output if MACRO-NAME was previously undefined (different
Modified: trunk/Build/source/libs/zziplib/zziplib-src/m4/ltversion.m4
===================================================================
--- trunk/Build/source/libs/zziplib/zziplib-src/m4/ltversion.m4 2018-03-17 22:23:43 UTC (rev 47003)
+++ trunk/Build/source/libs/zziplib/zziplib-src/m4/ltversion.m4 2018-03-18 00:25:18 UTC (rev 47004)
@@ -1,6 +1,6 @@
# ltversion.m4 -- version numbers -*- Autoconf -*-
#
-# Copyright (C) 2004 Free Software Foundation, Inc.
+# Copyright (C) 2004, 2011-2015 Free Software Foundation, Inc.
# Written by Scott James Remnant, 2004
#
# This file is free software; the Free Software Foundation gives
@@ -7,17 +7,17 @@
# unlimited permission to copy and/or distribute it, with or without
# modifications, as long as this notice is preserved.
-# Generated from ltversion.in.
+# @configure_input@
-# serial 3012 ltversion.m4
+# serial 4179 ltversion.m4
# This file is part of GNU Libtool
-m4_define([LT_PACKAGE_VERSION], [2.2.6])
-m4_define([LT_PACKAGE_REVISION], [1.3012])
+m4_define([LT_PACKAGE_VERSION], [2.4.6])
+m4_define([LT_PACKAGE_REVISION], [2.4.6])
AC_DEFUN([LTVERSION_VERSION],
-[macro_version='2.2.6'
-macro_revision='1.3012'
+[macro_version='2.4.6'
+macro_revision='2.4.6'
_LT_DECL(, macro_version, 0, [Which release of libtool.m4 was used?])
_LT_DECL(, macro_revision, 0)
])
Modified: trunk/Build/source/libs/zziplib/zziplib-src/m4/lt~obsolete.m4
===================================================================
--- trunk/Build/source/libs/zziplib/zziplib-src/m4/lt~obsolete.m4 2018-03-17 22:23:43 UTC (rev 47003)
+++ trunk/Build/source/libs/zziplib/zziplib-src/m4/lt~obsolete.m4 2018-03-18 00:25:18 UTC (rev 47004)
@@ -1,6 +1,7 @@
# lt~obsolete.m4 -- aclocal satisfying obsolete definitions. -*-Autoconf-*-
#
-# Copyright (C) 2004, 2005, 2007 Free Software Foundation, Inc.
+# Copyright (C) 2004-2005, 2007, 2009, 2011-2015 Free Software
+# Foundation, Inc.
# Written by Scott James Remnant, 2004.
#
# This file is free software; the Free Software Foundation gives
@@ -7,11 +8,11 @@
# unlimited permission to copy and/or distribute it, with or without
# modifications, as long as this notice is preserved.
-# serial 4 lt~obsolete.m4
+# serial 5 lt~obsolete.m4
# These exist entirely to fool aclocal when bootstrapping libtool.
#
-# In the past libtool.m4 has provided macros via AC_DEFUN (or AU_DEFUN)
+# In the past libtool.m4 has provided macros via AC_DEFUN (or AU_DEFUN),
# which have later been changed to m4_define as they aren't part of the
# exported API, or moved to Autoconf or Automake where they belong.
#
@@ -25,7 +26,7 @@
# included after everything else. This provides aclocal with the
# AC_DEFUNs it wants, but when m4 processes it, it doesn't do anything
# because those macros already exist, or will be overwritten later.
-# We use AC_DEFUN over AU_DEFUN for compatibility with aclocal-1.6.
+# We use AC_DEFUN over AU_DEFUN for compatibility with aclocal-1.6.
#
# Anytime we withdraw an AC_DEFUN or AU_DEFUN, remember to add it here.
# Yes, that means every name once taken will need to remain here until
@@ -77,7 +78,6 @@
m4_ifndef([_LT_AC_LANG_CXX], [AC_DEFUN([_LT_AC_LANG_CXX])])
m4_ifndef([_LT_AC_LANG_F77], [AC_DEFUN([_LT_AC_LANG_F77])])
m4_ifndef([_LT_AC_LANG_GCJ], [AC_DEFUN([_LT_AC_LANG_GCJ])])
-m4_ifndef([AC_LIBTOOL_RC], [AC_DEFUN([AC_LIBTOOL_RC])])
m4_ifndef([AC_LIBTOOL_LANG_C_CONFIG], [AC_DEFUN([AC_LIBTOOL_LANG_C_CONFIG])])
m4_ifndef([_LT_AC_LANG_C_CONFIG], [AC_DEFUN([_LT_AC_LANG_C_CONFIG])])
m4_ifndef([AC_LIBTOOL_LANG_CXX_CONFIG], [AC_DEFUN([AC_LIBTOOL_LANG_CXX_CONFIG])])
@@ -90,3 +90,10 @@
m4_ifndef([_LT_AC_LANG_RC_CONFIG], [AC_DEFUN([_LT_AC_LANG_RC_CONFIG])])
m4_ifndef([AC_LIBTOOL_CONFIG], [AC_DEFUN([AC_LIBTOOL_CONFIG])])
m4_ifndef([_LT_AC_FILE_LTDLL_C], [AC_DEFUN([_LT_AC_FILE_LTDLL_C])])
+m4_ifndef([_LT_REQUIRED_DARWIN_CHECKS], [AC_DEFUN([_LT_REQUIRED_DARWIN_CHECKS])])
+m4_ifndef([_LT_AC_PROG_CXXCPP], [AC_DEFUN([_LT_AC_PROG_CXXCPP])])
+m4_ifndef([_LT_PREPARE_SED_QUOTE_VARS], [AC_DEFUN([_LT_PREPARE_SED_QUOTE_VARS])])
+m4_ifndef([_LT_PROG_ECHO_BACKSLASH], [AC_DEFUN([_LT_PROG_ECHO_BACKSLASH])])
+m4_ifndef([_LT_PROG_F77], [AC_DEFUN([_LT_PROG_F77])])
+m4_ifndef([_LT_PROG_FC], [AC_DEFUN([_LT_PROG_FC])])
+m4_ifndef([_LT_PROG_CXX], [AC_DEFUN([_LT_PROG_CXX])])
Added: trunk/Build/source/libs/zziplib/zziplib-src/msvc7/README.TXT
===================================================================
--- trunk/Build/source/libs/zziplib/zziplib-src/msvc7/README.TXT (rev 0)
+++ trunk/Build/source/libs/zziplib/zziplib-src/msvc7/README.TXT 2018-03-18 00:25:18 UTC (rev 47004)
@@ -0,0 +1,31 @@
+These project files were tested with the
+free Microsoft Visual C++ 2005 Express Edition.
+
+Visual C++ Express does NOT include the Win32 SDK Headers.
+They must be downloaded separately as documented in the
+installation instructions at Microsoft - consequently that
+extra installation must be referenced via a system variable:
+Set MSSdk=C:\Program Files\Microsoft Platform SDK
+
+In order to compile you need a valid Zlib SDK - you can
+download it from zlib.org in the archive zlib123-dll.zip -
+I had unpacked them to $(zziplibdir)/zlib inside the
+toplevel of the zziplib source tree. That SDK does ship
+with a "zlib1.dll" runtime and "zdll.lib" import library.
+
+The new Visual Studio has deprecated most of the Win32 API
+just as well as most of the Posix API. That provokes a lot
+of warning message in surplus of the many warning message
+that occur on every implicit conversion between signed and
+unsigned types. Other compilers are more clever about
+detecting real conversion issues, therefore they are not
+going to be "patched away" with an explicit conversion in
+the source files (I expect Microsoft to get it right somewhen).
+
+== Download Places ==
+download.microsoft.com/download/a/5/f/a5f0d781-e201-4ab6-8c6a-9bb4efed1e1a/
+PSDK-x86.exe = Win32 SDK - online installer
+download.microsoft.com/download/A/9/1/A91D6B2B-A798-47DF-9C7E-A97854B7DD18/
+VC.iso = Visual C++ Express CD-image
+download.microsoft.com/download/C/6/F/C6F4733B-67C7-4C15-9F21-61F7A3167505/
+VCS.iso = Visual C# Express CD-image
Property changes on: trunk/Build/source/libs/zziplib/zziplib-src/msvc7/README.TXT
___________________________________________________________________
Added: svn:eol-style
## -0,0 +1 ##
+LF
\ No newline at end of property
Added: svn:keywords
## -0,0 +1 ##
+Author Date Id Rev URL
\ No newline at end of property
Added: trunk/Build/source/libs/zziplib/zziplib-src/msvc7/zip.exe
===================================================================
(Binary files differ)
Index: trunk/Build/source/libs/zziplib/zziplib-src/msvc7/zip.exe
===================================================================
--- trunk/Build/source/libs/zziplib/zziplib-src/msvc7/zip.exe 2018-03-17 22:23:43 UTC (rev 47003)
+++ trunk/Build/source/libs/zziplib/zziplib-src/msvc7/zip.exe 2018-03-18 00:25:18 UTC (rev 47004)
Property changes on: trunk/Build/source/libs/zziplib/zziplib-src/msvc7/zip.exe
___________________________________________________________________
Added: svn:executable
## -0,0 +1 ##
+*
\ No newline at end of property
Added: svn:mime-type
## -0,0 +1 ##
+application/octet-stream
\ No newline at end of property
Added: trunk/Build/source/libs/zziplib/zziplib-src/ports/symbian-S60/zziplib-symbian.zip
===================================================================
(Binary files differ)
Index: trunk/Build/source/libs/zziplib/zziplib-src/ports/symbian-S60/zziplib-symbian.zip
===================================================================
--- trunk/Build/source/libs/zziplib/zziplib-src/ports/symbian-S60/zziplib-symbian.zip 2018-03-17 22:23:43 UTC (rev 47003)
+++ trunk/Build/source/libs/zziplib/zziplib-src/ports/symbian-S60/zziplib-symbian.zip 2018-03-18 00:25:18 UTC (rev 47004)
Property changes on: trunk/Build/source/libs/zziplib/zziplib-src/ports/symbian-S60/zziplib-symbian.zip
___________________________________________________________________
Added: svn:mime-type
## -0,0 +1 ##
+application/octet-stream
\ No newline at end of property
Modified: trunk/Build/source/libs/zziplib/zziplib-src/test/Makefile.am
===================================================================
--- trunk/Build/source/libs/zziplib/zziplib-src/test/Makefile.am 2018-03-17 22:23:43 UTC (rev 47003)
+++ trunk/Build/source/libs/zziplib/zziplib-src/test/Makefile.am 2018-03-18 00:25:18 UTC (rev 47004)
@@ -3,8 +3,8 @@
DEFAULT_INCLUDES = # nothing - no default of -I. -I$(srcdir)
DEFS = @DEFS@ -I$(top_builddir) -I$(top_srcdir) # also for automake 1.4
-EXTRA_DIST = test.zip test1.zip zziptests.py
-DISTCLEANFILES = test*.dat test2.zip test3.zip
+EXTRA_DIST = test.zip zziptests.py
+DISTCLEANFILES = test*.dat test0.zip test1.zip test2.zip test3.zip
zzcat = ../bins/zzcat$(EXEEXT)
zzdir = ../bins/zzdir$(EXEEXT)
@@ -24,9 +24,16 @@
testzip testzips : test.zip test1.zip test2.zip test3.zip
-test.zip tmp/../test.zip : $(README)
+test0.zip: $(README)
- test -d tmp || mkdir tmp
- - $(MAKE) test0.zip && mv test0.zip $@
+ - cp $(README) tmp/README
+ - rm -f $@
+ - cd tmp && $(MKZIP) ../test0.zip README
+ - rm -r tmp
+ test -s test0.zip && cp -v test0.zip $(srcdir)/test.zip
+
+test.zip: $(README)
+ - $(MAKE) test0.zip
- test -s $@ || cp $(srcdir)/test.zip $@
# -------------------------------------------------------------------
@@ -38,15 +45,15 @@
check-tests: tests
tests:
- @ test -f zziptests.py || cp -s -v $(srcdir)/zziptests.py .
- python zziptests.py --exeext "$(EXEEXT)" --topsrcdir "$(top_srcdir)"
-test_%:
- @ test -f zziptests.py || cp -s -v $(srcdir)/zziptests.py .
- python zziptests.py $@ -vvvv --exeext "$(EXEEXT)" --topsrcdir "$(top_srcdir)"
+ @ test -f zziptests.py || ln -s -v $(srcdir)/zziptests.py . || cp -v $(srcdir)/zziptests.py .
+ $(PYTHON) zziptests.py --exeext "$(EXEEXT)" --topsrcdir "$(top_srcdir)"
+test_%:
+ @ test -f zziptests.py || ln -s -v $(srcdir)/zziptests.py . || cp -v $(srcdir)/zziptests.py .
+ $(PYTHON) zziptests.py $@ -vvvv --exeext "$(EXEEXT)" --topsrcdir "$(top_srcdir)"
check-readme : $(zzcat) test.zip
- @ test -f test.zip || $(MAKE) tmp/../test.zip
- test -s test.zip
+ @ test -f test.zip || $(MAKE) test0.zip
+ test -s test.zip || cp $(srcdir)/test.zip test.zip
@ echo :$@: checking $(zzcat) test/README
@ $(zzcat) test/README >test.out
@ if diff test.out $(README) >$(NULL) \
Modified: trunk/Build/source/libs/zziplib/zziplib-src/test/Makefile.in
===================================================================
--- trunk/Build/source/libs/zziplib/zziplib-src/test/Makefile.in 2018-03-17 22:23:43 UTC (rev 47003)
+++ trunk/Build/source/libs/zziplib/zziplib-src/test/Makefile.in 2018-03-18 00:25:18 UTC (rev 47004)
@@ -1,7 +1,7 @@
-# Makefile.in generated by automake 1.13.4 from Makefile.am.
+# Makefile.in generated by automake 1.15.1 from Makefile.am.
# @configure_input@
-# Copyright (C) 1994-2013 Free Software Foundation, Inc.
+# Copyright (C) 1994-2017 Free Software Foundation, Inc.
# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
@@ -15,7 +15,17 @@
@SET_MAKE@
VPATH = @srcdir@
-am__is_gnu_make = test -n '$(MAKEFILE_LIST)' && test -n '$(MAKELEVEL)'
+am__is_gnu_make = { \
+ if test -z '$(MAKELEVEL)'; then \
+ false; \
+ elif test -n '$(MAKE_HOST)'; then \
+ true; \
+ elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \
+ true; \
+ else \
+ false; \
+ fi; \
+}
am__make_running_with_option = \
case $${target_option-} in \
?) ;; \
@@ -81,9 +91,6 @@
target_triplet = @target@
noinst_PROGRAMS = zzipself$(EXEEXT) zzipsetstub$(EXEEXT)
subdir = test
-DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/Makefile.am \
- $(top_srcdir)/uses/mkinstalldirs $(top_srcdir)/uses/depcomp \
- README
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
am__aclocal_m4_deps = $(top_srcdir)/m4/ac_compile_check_sizeof.m4 \
$(top_srcdir)/m4/ac_set_default_paths_system.m4 \
@@ -94,6 +101,7 @@
$(top_srcdir)/m4/ax_cflags_strict_prototypes.m4 \
$(top_srcdir)/m4/ax_cflags_warn_all.m4 \
$(top_srcdir)/m4/ax_check_aligned_access_required.m4 \
+ $(top_srcdir)/m4/ax_check_enable_debug.m4 \
$(top_srcdir)/m4/ax_configure_args.m4 \
$(top_srcdir)/m4/ax_create_pkgconfig_info.m4 \
$(top_srcdir)/m4/ax_enable_builddir.m4 \
@@ -116,6 +124,7 @@
$(top_srcdir)/configure.ac
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
$(ACLOCAL_M4)
+DIST_COMMON = $(srcdir)/Makefile.am $(am__DIST_COMMON)
mkinstalldirs = $(SHELL) $(top_srcdir)/uses/mkinstalldirs
CONFIG_HEADER = $(top_builddir)/config.h
CONFIG_CLEAN_FILES =
@@ -193,6 +202,8 @@
done | $(am__uniquify_input)`
ETAGS = etags
CTAGS = ctags
+am__DIST_COMMON = $(srcdir)/Makefile.in $(top_srcdir)/uses/depcomp \
+ $(top_srcdir)/uses/mkinstalldirs README
DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
ACLOCAL = @ACLOCAL@
AMTAR = @AMTAR@
@@ -199,6 +210,8 @@
AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
AR = @AR@
AS = @AS@
+ASAN_CFLAGS = @ASAN_CFLAGS@
+ASAN_LIBS = @ASAN_LIBS@
AUTOCONF = @AUTOCONF@
AUTOHEADER = @AUTOHEADER@
AUTOMAKE = @AUTOMAKE@
@@ -238,8 +251,10 @@
LIPO = @LIPO@
LN_S = @LN_S@
LTLIBOBJS = @LTLIBOBJS@
+LT_SYS_LIBRARY_PATH = @LT_SYS_LIBRARY_PATH@
MAINT = @MAINT@
MAKEINFO = @MAKEINFO@
+MANIFEST_TOOL = @MANIFEST_TOOL@
MKDIR_P = @MKDIR_P@
MKZIP = @MKZIP@
NM = @NM@
@@ -285,6 +300,7 @@
abs_srcdir = @abs_srcdir@
abs_top_builddir = @abs_top_builddir@
abs_top_srcdir = @abs_top_srcdir@
+ac_ct_AR = @ac_ct_AR@
ac_ct_CC = @ac_ct_CC@
ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
aclocaldir = @aclocaldir@
@@ -319,7 +335,6 @@
libexecdir = @libexecdir@
localedir = @localedir@
localstatedir = @localstatedir@
-lt_ECHO = @lt_ECHO@
mandir = @mandir@
mkdir_p = @mkdir_p@
oldincludedir = @oldincludedir@
@@ -345,8 +360,8 @@
AUTOMAKE_OPTIONS = 1.4 foreign
AUTOTOOL_VERSION = autoconf-2.52 automake-1.5 libtool-1.4.2
DEFAULT_INCLUDES = # nothing - no default of -I. -I$(srcdir)
-EXTRA_DIST = test.zip test1.zip zziptests.py
-DISTCLEANFILES = test*.dat test2.zip test3.zip
+EXTRA_DIST = test.zip zziptests.py
+DISTCLEANFILES = test*.dat test0.zip test1.zip test2.zip test3.zip
zzcat = ../bins/zzcat$(EXEEXT)
zzdir = ../bins/zzdir$(EXEEXT)
zziptest = ../bins/zziptest$(EXEEXT)
@@ -380,7 +395,6 @@
echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign test/Makefile'; \
$(am__cd) $(top_srcdir) && \
$(AUTOMAKE) --foreign test/Makefile
-.PRECIOUS: Makefile
Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
@case '$?' in \
*config.status*) \
@@ -430,7 +444,7 @@
@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
- at am__fastdepCC_FALSE@ $(AM_V_CC at am__nodep@)$(COMPILE) -c $<
+ at am__fastdepCC_FALSE@ $(AM_V_CC at am__nodep@)$(COMPILE) -c -o $@ $<
.c.obj:
@am__fastdepCC_TRUE@ $(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'`
@@ -437,7 +451,7 @@
@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
- at am__fastdepCC_FALSE@ $(AM_V_CC at am__nodep@)$(COMPILE) -c `$(CYGPATH_W) '$<'`
+ at am__fastdepCC_FALSE@ $(AM_V_CC at am__nodep@)$(COMPILE) -c -o $@ `$(CYGPATH_W) '$<'`
.c.lo:
@am__fastdepCC_TRUE@ $(AM_V_CC)$(LTCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
@@ -657,7 +671,9 @@
mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \
tags tags-am uninstall uninstall-am
+.PRECIOUS: Makefile
+
$(zzcat) $(zzdir) $(zziptest) $(zzxorcat) $(zzxordir) $(xorcopy) : \
@top_srcdir@/bins/*.c @top_srcdir@/zzip/*.c
(cd ../bins && $(MAKE))
@@ -664,9 +680,16 @@
testzip testzips : test.zip test1.zip test2.zip test3.zip
-test.zip tmp/../test.zip : $(README)
+test0.zip: $(README)
- test -d tmp || mkdir tmp
- - $(MAKE) test0.zip && mv test0.zip $@
+ - cp $(README) tmp/README
+ - rm -f $@
+ - cd tmp && $(MKZIP) ../test0.zip README
+ - rm -r tmp
+ test -s test0.zip && cp -v test0.zip $(srcdir)/test.zip
+
+test.zip: $(README)
+ - $(MAKE) test0.zip
- test -s $@ || cp $(srcdir)/test.zip $@
check-local: check-readme $(sfxtests) $(newtests)
@@ -673,15 +696,15 @@
check-tests: tests
tests:
- @ test -f zziptests.py || cp -s -v $(srcdir)/zziptests.py .
- python zziptests.py --exeext "$(EXEEXT)" --topsrcdir "$(top_srcdir)"
-test_%:
- @ test -f zziptests.py || cp -s -v $(srcdir)/zziptests.py .
- python zziptests.py $@ -vvvv --exeext "$(EXEEXT)" --topsrcdir "$(top_srcdir)"
+ @ test -f zziptests.py || ln -s -v $(srcdir)/zziptests.py . || cp -v $(srcdir)/zziptests.py .
+ $(PYTHON) zziptests.py --exeext "$(EXEEXT)" --topsrcdir "$(top_srcdir)"
+test_%:
+ @ test -f zziptests.py || ln -s -v $(srcdir)/zziptests.py . || cp -v $(srcdir)/zziptests.py .
+ $(PYTHON) zziptests.py $@ -vvvv --exeext "$(EXEEXT)" --topsrcdir "$(top_srcdir)"
check-readme : $(zzcat) test.zip
- @ test -f test.zip || $(MAKE) tmp/../test.zip
- test -s test.zip
+ @ test -f test.zip || $(MAKE) test0.zip
+ test -s test.zip || cp $(srcdir)/test.zip test.zip
@ echo :$@: checking $(zzcat) test/README
@ $(zzcat) test/README >test.out
@ if diff test.out $(README) >$(NULL) \
Modified: trunk/Build/source/libs/zziplib/zziplib-src/test/README
===================================================================
--- trunk/Build/source/libs/zziplib/zziplib-src/test/README 2018-03-17 22:23:43 UTC (rev 47003)
+++ trunk/Build/source/libs/zziplib/zziplib-src/test/README 2018-03-18 00:25:18 UTC (rev 47004)
@@ -12,7 +12,7 @@
COPYING
The zziplib may be used freely under the restrictions of the
- GNU Lesser General Public License version 2 or later. Alternativly
+ GNU Lesser General Public License version 2 or later. Alternatively
the Mozilla Public license can be chosen. The sources are under
a dual license, as long as the MPL hint is not removed, the modified
files will be again under a dual license for the final recipient.
@@ -24,12 +24,11 @@
special (paid) licenses can be negotiated with the copyright holder.
HOMEPAGE
- The zziplib project has moved to GitHub where you can find the
- last release tags now => https://github.com/gdraheim/zziplib
- The zziplib project was originally hosted at SourceForge with
- the documentation at http://zziplib.sf.net - this is a bit
- outdated but the API has not changed much since then. To get
- the latest release announcements, watch the GitHub project.
+ The zziplib project is hosted at SourceForge, the complete
+ documentation can be found at http://zziplib.sf.net - the
+ SourceForge servers are also used to distribute the sources
+ of the zziplib project. Releases are announced via the
+ freshmeat services on http://freshmeat.net/projects/zziplib
INSTALLATION
The zziplib sources are built with gnu autotools and they should
Modified: trunk/Build/source/libs/zziplib/zziplib-src/test/test.zip
===================================================================
(Binary files differ)
Deleted: trunk/Build/source/libs/zziplib/zziplib-src/test/test1.zip
===================================================================
(Binary files differ)
Modified: trunk/Build/source/libs/zziplib/zziplib-src/test/zziptests.py
===================================================================
--- trunk/Build/source/libs/zziplib/zziplib-src/test/zziptests.py 2018-03-17 22:23:43 UTC (rev 47003)
+++ trunk/Build/source/libs/zziplib/zziplib-src/test/zziptests.py 2018-03-18 00:25:18 UTC (rev 47004)
@@ -19,6 +19,7 @@
mkzip = "zip"
unzip = "unzip"
exeext = ""
+bindir = os.path.join("..", "bins")
def shell_string(command):
return " ".join(["'%s'" % arg.replace("'","\\'") for arg in command])
@@ -39,9 +40,17 @@
env[name] = lang
env["LANG"] = lang # defines message format
env["LC_ALL"] = lang # other locale formats
- build_libs = os.path.dirname(os.path.dirname(os.path.realpath(command[0])))+"/zzip/.libs"
- if os.path.isdir(build_libs):
- env["LD_LIBRARY_PATH"] = build_libs
+ zzip_libs = "/zzip/.libs"
+ zzip_cmds = command[0].split(" ")[0]
+ build_lib1 = os.path.dirname(os.path.realpath(zzip_cmds))
+ build_lib2 = os.path.dirname(build_lib1)
+ build_lib3 = os.path.dirname(build_lib2)
+ if os.path.isdir(build_lib1 + zzip_libs):
+ env["LD_LIBRARY_PATH"] = build_lib1 + zzip_libs
+ elif os.path.isdir(build_lib2 + zzip_libs):
+ env["LD_LIBRARY_PATH"] = build_lib2 + zzip_libs
+ elif os.path.isdir(build_lib3 + zzip_libs):
+ env["LD_LIBRARY_PATH"] = build_lib3 + zzip_libs
try:
output, errors = "", ""
if calls:
@@ -102,6 +111,11 @@
if not os.path.isdir(subdir):
os.makedirs(subdir)
subfile = os.path.join(subdir, filename)
+ if not os.path.exists(subfile) and "---" in base_url:
+ my_downloads = os.path.expanduser("~/Downloads")
+ srcfile = os.path.join(my_downloads, filename)
+ if os.path.exists(srcfile):
+ shutil.copy(srcfile, subfile)
if not os.path.exists(subfile):
logg.info("need %s", subfile)
d = urllib.urlopen(base_url + "/" + filename + style)
@@ -111,7 +125,9 @@
#
if not os.path.isdir(into):
os.makedirs(into)
- shutil.copy(subfile, into)
+ intofile = os.path.join(into, filename)
+ shutil.copy(subfile, intofile)
+ logg.debug("copied %s -> %s", subfile, intofile)
return filename
def output(cmd, shell=True):
@@ -166,9 +182,15 @@
def bins(self, name):
if name == "unzip": return unzip
if name == "mkzip": return mkzip
- exe = os.path.join("..", "bins", name)
+ exe = os.path.join(bindir, name)
if exeext: exe += exeext
return exe
+ def gdb_bins(self, name):
+ if name == "unzip": return unzip
+ if name == "mkzip": return mkzip
+ exe = os.path.join(bindir, ".libs", name)
+ if exeext: exe += exeext
+ return exe
def gentext(self, size):
random.seed(1234567891234567890)
result = StringIO()
@@ -1332,7 +1354,7 @@
self.assertIn(" 3 test", run.output)
#
run = shell("cd {tmpdir} && ../{exe} {filename} ".format(**locals()),
- returncodes = [2])
+ returncodes = [0])
self.assertLess(len(run.output), 30)
self.assertEqual(os.path.getsize(tmpdir+"/test"), 3)
self.rm_testdir()
@@ -1438,15 +1460,15 @@
returncodes = [0])
self.assertLess(len(run.output), 1)
self.assertLess(len(errors(run.errors)), 180)
- self.assertIn("zzip_mem_disk_load : unable to load entry", run.errors)
+ # self.assertIn("zzip_mem_disk_load : unable to load entry", run.errors)
self.assertIn("zzip_mem_disk_open : unable to load disk", run.errors)
#
run = shell("cd {tmpdir} && ../{exe} {filename} ".format(**locals()),
- returncodes = [2])
+ returncodes = [0])
self.assertLess(len(run.output), 30)
self.assertLess(len(errors(run.errors)), 300)
if grep("DEBUG:", run.errors):
- self.assertIn("findfirst (nil)", run.errors)
+ self.assertIn("zzip_mem_disk_open : unable to load disk", run.errors)
self.assertFalse(os.path.exists(tmpdir+"/test"))
# self.assertEqual(os.path.getsize(tmpdir+"/test"), 0)
self.rm_testdir()
@@ -1556,7 +1578,7 @@
self.assertIn(" 3 a", run.output)
#
run = shell("cd {tmpdir} && ../{exe} {filename} ".format(**locals()),
- returncodes = [2])
+ returncodes = [0])
self.assertLess(len(run.output), 30)
self.assertEqual(os.path.getsize(tmpdir+"/a"), 3)
self.rm_testdir()
@@ -1665,7 +1687,7 @@
self.assertIn(" 3 test", run.output)
#
run = shell("cd {tmpdir} && ../{exe} {filename} ".format(**locals()),
- returncodes = [2])
+ returncodes = [0])
self.assertLess(len(run.output), 30)
self.assertEqual(os.path.getsize(tmpdir+"/test"), 3)
self.rm_testdir()
@@ -1777,11 +1799,11 @@
self.assertIn("zzip_mem_disk_open : unable to load disk", run.errors)
#
run = shell("cd {tmpdir} && ../{exe} {filename} ".format(**locals()),
- returncodes = [2])
+ returncodes = [0])
self.assertLess(len(run.output), 30)
self.assertLess(len(errors(run.errors)), 200)
if grep("DEBUG:", run.errors):
- self.assertIn("findfirst (nil)", run.errors)
+ self.assertIn("no header in entry", run.errors)
self.assertFalse(os.path.exists(tmpdir+"/test"))
self.rm_testdir()
def test_59753_zzipdir_mix_CVE_2017_5975(self):
@@ -1894,7 +1916,7 @@
self.assertIn("3 test", run.output)
#
run = shell("cd {tmpdir} && ../{exe} {filename} ".format(**locals()),
- returncodes = [2])
+ returncodes = [0])
self.assertLess(len(run.output), 30)
self.assertLess(len(errors(run.errors)), 30) # TODO
self.assertEqual(os.path.getsize(tmpdir+"/test"), 3)
@@ -1999,16 +2021,15 @@
filename = self.zip_CVE_2017_5980
file_url = self.url_CVE_2017_5980
download_raw(file_url, filename, tmpdir)
- exe = self.bins("unzzipdir-mem")
- run = shell("{exe} {tmpdir}/{filename} ".format(**locals()),
- returncodes = [0,127,-11])
+ exe = self.bins("unzzip-mem")
+ run = shell("{exe} -l {tmpdir}/{filename} ".format(**locals()),
+ returncodes = [0])
self.assertLess(len(run.output), 1)
self.assertLess(len(errors(run.errors)), 180)
- # self.assertTrue(greps(run.errors, "unable to load disk"))
+ self.assertTrue(greps(run.errors, "unable to load disk"))
#
- exe = self.bins("unzzipcat-mem")
run = shell("cd {tmpdir} && ../{exe} {filename} ".format(**locals()),
- returncodes = [2])
+ returncodes = [0])
self.assertLess(len(run.output), 30)
self.assertLess(len(errors(run.errors)), 200)
self.assertFalse(os.path.exists(tmpdir+"/test"))
@@ -2121,7 +2142,7 @@
self.assertLess(len(errors(run.errors)), 1)
#
run = shell("cd {tmpdir} && ../{exe} {filename} ".format(**locals()),
- returncodes = [2])
+ returncodes = [0])
self.assertLess(len(run.output), 30)
self.assertLess(len(errors(run.errors)), 10)
# self.assertEqual(os.path.getsize(tmpdir+"/test"), 3)
@@ -2231,7 +2252,7 @@
self.assertLess(len(errors(run.errors)), 1)
#
run = shell("cd {tmpdir} && ../{exe} {filename} ".format(**locals()),
- returncodes = [2])
+ returncodes = [0])
self.assertLess(len(run.output), 30)
self.assertLess(len(errors(run.errors)), 10)
# self.assertEqual(os.path.getsize(tmpdir+"/test"), 3)
@@ -2353,7 +2374,7 @@
self.assertLess(len(errors(run.errors)), 1)
#
run = shell("cd {tmpdir} && ../{exe} {filename} ".format(**locals()),
- returncodes = [2])
+ returncodes = [0])
self.assertLess(len(run.output), 30)
self.assertLess(len(errors(run.errors)), 10)
# self.assertEqual(os.path.getsize(tmpdir+"/test"), 3)
@@ -2462,11 +2483,12 @@
exe = self.bins("unzzip-mem")
run = shell("{exe} -l {tmpdir}/{filename} ".format(**locals()),
returncodes = [0])
- self.assertLess(len(run.output), 1)
+ self.assertIn("2 aUT", run.output) # filename contains a control-character
+ self.assertGreater(len(run.output), 20)
self.assertLess(len(errors(run.errors)), 1)
#
run = shell("cd {tmpdir} && ../{exe} {filename} ".format(**locals()),
- returncodes = [2])
+ returncodes = [0])
self.assertLess(len(run.output), 30)
self.assertLess(len(errors(run.errors)), 10)
# self.assertEqual(os.path.getsize(tmpdir+"/test"), 3)
@@ -2519,7 +2541,7 @@
download_raw(file_url, filename, tmpdir)
shell("ls -l {tmpdir}/{filename}".format(**locals()))
size = os.path.getsize(os.path.join(tmpdir, filename))
- self.assertEqual(size, 152)
+ self.assertEqual(size, 141)
url_CVE_2018_14 = "https://github.com/ProbeFuzzer/poc/blob/master/zziplib"
zip_CVE_2018_14 = "zziplib_0-13-67_zzdir_memory-alignment-errors___zzip_fetch_disk_trailer.zip"
@@ -2576,7 +2598,7 @@
self.assertLess(len(run.output), 1)
#
run = shell("cd {tmpdir} && ../{exe} {filename} ".format(**locals()),
- returncodes = [2])
+ returncodes = [0])
self.assertLess(len(run.output), 30)
self.assertLess(len(errors(run.errors)), 10)
# self.assertEqual(os.path.getsize(tmpdir+"/test"), 3)
@@ -2699,7 +2721,7 @@
self.assertLess(len(errors(run.errors)), 1)
#
run = shell("cd {tmpdir} && ../{exe} {filename} ".format(**locals()),
- returncodes = [2])
+ returncodes = [0])
self.assertLess(len(run.output), 30)
self.assertLess(len(errors(run.errors)), 10)
# self.assertEqual(os.path.getsize(tmpdir+"/test"), 3)
@@ -2809,7 +2831,7 @@
self.assertLess(len(errors(run.errors)), 1)
#
run = shell("cd {tmpdir} && ../{exe} {filename} ".format(**locals()),
- returncodes = [2])
+ returncodes = [0])
self.assertLess(len(run.output), 30)
self.assertLess(len(errors(run.errors)), 10)
# self.assertEqual(os.path.getsize(tmpdir+"/test"), 3)
@@ -2923,7 +2945,7 @@
self.assertLess(len(errors(run.errors)), 1)
#
run = shell("cd {tmpdir} && ../{exe} {filename} ".format(**locals()),
- returncodes = [2])
+ returncodes = [0])
self.assertLess(len(run.output), 30)
self.assertLess(len(errors(run.errors)), 10)
# self.assertEqual(os.path.getsize(tmpdir+"/test"), 3)
@@ -2930,7 +2952,7 @@
self.assertFalse(os.path.exists(tmpdir+"/test"))
#
run = shell("cd {tmpdir} && ../{exe} -p {filename} ".format(**locals()),
- returncodes = [2])
+ returncodes = [0])
# self.rm_testdir()
def test_65423(self):
""" unzzip-mix -l $(CVE).zip """
@@ -2982,6 +3004,406 @@
self.assertEqual(size, 360)
+ url_CVE_2018_42 = "https://github.com/fantasy7082/image_test/blob/master"
+ zip_CVE_2018_42 = "c006-unknown-add-main"
+ def test_65430(self):
+ """ info unzip -l $(CVE).zip """
+ tmpdir = self.testdir()
+ filename = self.zip_CVE_2018_42
+ file_url = self.url_CVE_2018_42
+ download_raw(file_url, filename, tmpdir)
+ exe = self.bins("unzip")
+ run = shell("{exe} -l {tmpdir}/{filename} ".format(**locals()),
+ returncodes = [0, 80])
+ self.assertIn("missing 18 bytes in zipfile", run.errors)
+ self.assertLess(len(run.output), 200)
+ self.assertLess(len(errors(run.errors)), 800)
+ #
+ run = shell("cd {tmpdir} && {exe} -o {filename}".format(**locals()),
+ returncodes = [3])
+ self.assertLess(len(run.output), 200)
+ self.assertLess(len(errors(run.errors)), 800)
+ self.assertIn("missing 18 bytes in zipfile", run.errors)
+ self.assertIn('expected central file header signature not found', run.errors)
+ # self.assertEqual(os.path.getsize(tmpdir+"/test"), 3)
+ self.assertFalse(os.path.exists(tmpdir+"/test"))
+ self.rm_testdir()
+ def test_65431(self):
+ """ zzdir $(CVE).zip """
+ tmpdir = self.testdir()
+ filename = self.zip_CVE_2018_42
+ file_url = self.url_CVE_2018_42
+ download_raw(file_url, filename, tmpdir)
+ exe = self.bins("zzdir")
+ run = shell("{exe} {tmpdir}/{filename} ".format(**locals()),
+ returncodes = [0])
+ logg.info("OUT %s", run.output)
+ logg.info("ERR %s", run.errors)
+ self.assertIn(" zipped ", run.output)
+ self.rm_testdir()
+
+ url_CVE_2018_43 = "https://github.com/fantasy7082/image_test/blob/master"
+ zip_CVE_2018_43 = "c008-main-unknown-de"
+ def test_65440(self):
+ """ info unzip -l $(CVE).zip """
+ tmpdir = self.testdir()
+ filename = self.zip_CVE_2018_43
+ file_url = self.url_CVE_2018_43
+ download_raw(file_url, filename, tmpdir)
+ exe = self.bins("unzip")
+ run = shell("{exe} -l {tmpdir}/{filename} ".format(**locals()),
+ returncodes = [0, 80])
+ self.assertIn("missing 18 bytes in zipfile", run.errors)
+ self.assertLess(len(run.output), 200)
+ self.assertLess(len(errors(run.errors)), 800)
+ #
+ run = shell("cd {tmpdir} && {exe} -o {filename}".format(**locals()),
+ returncodes = [3])
+ self.assertLess(len(run.output), 200)
+ self.assertLess(len(errors(run.errors)), 800)
+ self.assertIn("missing 18 bytes in zipfile", run.errors)
+ self.assertIn('expected central file header signature not found', run.errors)
+ # self.assertEqual(os.path.getsize(tmpdir+"/test"), 3)
+ self.assertFalse(os.path.exists(tmpdir+"/test"))
+ self.rm_testdir()
+ def test_65441(self):
+ """ zzdir $(CVE).zip """
+ tmpdir = self.testdir()
+ filename = self.zip_CVE_2018_43
+ file_url = self.url_CVE_2018_43
+ download_raw(file_url, filename, tmpdir)
+ exe = self.bins("zzdir")
+ run = shell("{exe} {tmpdir}/{filename} ".format(**locals()),
+ returncodes = [0])
+ logg.info("OUT %s", run.output)
+ logg.info("ERR %s", run.errors)
+ self.assertIn(" zipped ", run.output)
+ self.rm_testdir()
+
+ url_CVE_2018_27 = "https://github.com/ret2libc/---provided-by-email---"
+ zip_CVE_2018_27 = "poc_bypass_fix2.zip"
+ def test_65450(self):
+ """ info unzip -l $(CVE).zip """
+ tmpdir = self.testdir()
+ filename = self.zip_CVE_2018_27
+ file_url = self.url_CVE_2018_27
+ download_raw(file_url, filename, tmpdir)
+ if not os.path.isfile(os.path.join(tmpdir, filename)): self.skipTest("missing " + filename)
+ exe = self.bins("unzip")
+ run = shell("{exe} -l {tmpdir}/{filename} ".format(**locals()),
+ returncodes = [0, 9])
+ self.assertIn("End-of-central-directory signature not found", run.errors)
+ self.assertLess(len(run.output), 200)
+ self.assertLess(len(errors(run.errors)), 800)
+ #
+ run = shell("cd {tmpdir} && {exe} -o {filename}".format(**locals()),
+ returncodes = [9])
+ self.assertLess(len(run.output), 200)
+ self.assertLess(len(errors(run.errors)), 800)
+ self.assertIn('End-of-central-directory signature not found', run.errors)
+ # self.assertEqual(os.path.getsize(tmpdir+"/test"), 3)
+ self.assertFalse(os.path.exists(tmpdir+"/test"))
+ self.rm_testdir()
+ def test_65451(self):
+ """ unzzip-big -l $(CVE).zip """
+ tmpdir = self.testdir()
+ filename = self.zip_CVE_2018_27
+ file_url = self.url_CVE_2018_27
+ download_raw(file_url, filename, tmpdir)
+ if not os.path.isfile(os.path.join(tmpdir, filename)): self.skipTest("missing " + filename)
+ exe = self.bins("unzzip-big")
+ run = shell("{exe} -l {tmpdir}/{filename} ".format(**locals()),
+ returncodes = [0])
+ self.assertLess(len(run.output), 1)
+ #
+ run = shell("cd {tmpdir} && ../{exe} {filename} ".format(**locals()),
+ returncodes = [0])
+ self.assertLess(len(run.output), 30)
+ self.assertLess(len(errors(run.errors)), 1)
+ # self.assertEqual(os.path.getsize(tmpdir+"/test"), 3)
+ self.assertFalse(os.path.exists(tmpdir+"/test"))
+ self.rm_testdir()
+ def test_65452(self):
+ """ unzzip-mem -l $(CVE).zip """
+ tmpdir = self.testdir()
+ filename = self.zip_CVE_2018_27
+ file_url = self.url_CVE_2018_27
+ download_raw(file_url, filename, tmpdir)
+ if not os.path.isfile(os.path.join(tmpdir, filename)): self.skipTest("missing " + filename)
+ exe = self.bins("unzzip-mem")
+ run = shell("{exe} -l {tmpdir}/{filename} ".format(**locals()),
+ returncodes = [0])
+ self.assertLess(len(run.output), 50)
+ self.assertLess(len(errors(run.errors)), 1)
+ #
+ run = shell("cd {tmpdir} && ../{exe} {filename} ".format(**locals()),
+ returncodes = [0])
+ self.assertLess(len(run.output), 30)
+ self.assertLess(len(errors(run.errors)), 10)
+ # self.assertEqual(os.path.getsize(tmpdir+"/test"), 3)
+ self.assertFalse(os.path.exists(tmpdir+"/test"))
+ #
+ run = shell("cd {tmpdir} && ../{exe} -p {filename} ".format(**locals()),
+ returncodes = [0])
+ # self.rm_testdir()
+ def test_65453(self):
+ """ unzzip-mix -l $(CVE).zip """
+ tmpdir = self.testdir()
+ filename = self.zip_CVE_2018_27
+ file_url = self.url_CVE_2018_27
+ download_raw(file_url, filename, tmpdir)
+ if not os.path.isfile(os.path.join(tmpdir, filename)): self.skipTest("missing " + filename)
+ exe = self.bins("unzzip-mix")
+ run = shell("{exe} -l {tmpdir}/{filename} ".format(**locals()),
+ returncodes = [0,2])
+ self.assertLess(len(run.output), 1)
+ self.assertTrue(greps(run.errors, "Invalid or"))
+ #
+ run = shell("cd {tmpdir} && ../{exe} {filename} ".format(**locals()),
+ returncodes = [0,2])
+ self.assertLess(len(run.output), 30)
+ self.assertTrue(greps(run.errors, "Invalid or"))
+ # self.assertEqual(os.path.getsize(tmpdir+"/test"), 3)
+ self.assertFalse(os.path.exists(tmpdir+"/test"))
+ self.rm_testdir()
+ def test_65454(self):
+ """ unzzip-zap -l $(CVE).zip """
+ tmpdir = self.testdir()
+ filename = self.zip_CVE_2018_27
+ file_url = self.url_CVE_2018_27
+ download_raw(file_url, filename, tmpdir)
+ if not os.path.isfile(os.path.join(tmpdir, filename)): self.skipTest("missing " + filename)
+ exe = self.bins("unzzip")
+ run = shell("{exe} -l {tmpdir}/{filename} ".format(**locals()),
+ returncodes = [0, 3])
+ self.assertLess(len(run.output), 1)
+ self.assertLess(len(errors(run.errors)), 200)
+ self.assertIn(": Success", run.errors)
+ #
+ run = shell("cd {tmpdir} && ../{exe} {filename} ".format(**locals()),
+ returncodes = [0,3])
+ self.assertLess(len(run.output), 30)
+ self.assertTrue(greps(run.errors, "Zipfile corrupted"))
+ # self.assertEqual(os.path.getsize(tmpdir+"/test"), 3)
+ self.assertFalse(os.path.exists(tmpdir+"/test"))
+ self.rm_testdir()
+ def test_65459(self):
+ """ check $(CVE).zip """
+ tmpdir = self.testdir()
+ filename = self.zip_CVE_2018_27
+ file_url = self.url_CVE_2018_27
+ download_raw(file_url, filename, tmpdir)
+ if not os.path.isfile(os.path.join(tmpdir, filename)): self.skipTest("missing " + filename)
+ shell("ls -l {tmpdir}/{filename}".format(**locals()))
+ size = os.path.getsize(os.path.join(tmpdir, filename))
+ self.assertEqual(size, 56)
+
+ url_CVE_2018_41 = "https://github.com/fantasy7082/image_test/blob/master"
+ zip_CVE_2018_41 = "c005-bus-zzip_parse_root_directory" # CVE-2018-7726.
+ def test_65460(self):
+ """ info unzip -l $(CVE).zip """
+ tmpdir = self.testdir()
+ filename = self.zip_CVE_2018_41
+ file_url = self.url_CVE_2018_41
+ download_raw(file_url, filename, tmpdir)
+ exe = self.bins("unzip")
+ run = shell("{exe} -l {tmpdir}/{filename} ".format(**locals()),
+ returncodes = [0, 3])
+ self.assertIn("missing 20 bytes in zipfile", run.errors)
+ self.assertLess(len(run.output), 200)
+ self.assertLess(len(errors(run.errors)), 800)
+ #
+ run = shell("cd {tmpdir} && {exe} -o {filename}".format(**locals()),
+ returncodes = [3])
+ self.assertLess(len(run.output), 200)
+ self.assertLess(len(errors(run.errors)), 800)
+ self.assertIn("missing 20 bytes in zipfile", run.errors)
+ self.assertIn('attempt to seek before beginning of zipfile', run.errors)
+ # self.assertEqual(os.path.getsize(tmpdir+"/test"), 3)
+ self.assertFalse(os.path.exists(tmpdir+"/test"))
+ self.rm_testdir()
+ def test_65461(self):
+ """ zzdir $(CVE).zip """
+ tmpdir = self.testdir()
+ filename = self.zip_CVE_2018_41
+ file_url = self.url_CVE_2018_41
+ download_raw(file_url, filename, tmpdir)
+ exe = self.bins("zzdir")
+ run = shell("{exe} {tmpdir}/{filename} ".format(**locals()),
+ returncodes = [1])
+ logg.info("OUT %s", run.output)
+ logg.info("ERR %s", run.errors)
+ ####### self.assertIn(" zipped ", run.output)
+ self.rm_testdir()
+
+ url_CVE_2018_39 = "https://github.com/fantasy7082/image_test/blob/master"
+ zip_CVE_2018_39 = "003-unknow-def-zip"
+ def test_65470(self):
+ """ info unzip -l $(CVE).zip """
+ tmpdir = self.testdir()
+ filename = self.zip_CVE_2018_39
+ file_url = self.url_CVE_2018_39
+ download_raw(file_url, filename, tmpdir)
+ if not os.path.isfile(os.path.join(tmpdir, filename)): self.skipTest("missing " + filename)
+ exe = self.bins("unzip")
+ run = shell("{exe} -l {tmpdir}/{filename} ".format(**locals()),
+ returncodes = [3])
+ self.assertIn("missing 5123 bytes in zipfile", run.errors)
+ self.assertIn("expected central file header signature not found", run.errors)
+ self.assertLess(len(run.output), 400)
+ self.assertLess(len(errors(run.errors)), 800)
+ #
+ run = shell("cd {tmpdir} && {exe} -o {filename}".format(**locals()),
+ returncodes = [3])
+ self.assertLess(len(run.output), 400)
+ self.assertLess(len(errors(run.errors)), 800)
+ self.assertIn("missing 5123 bytes in zipfile", run.errors)
+ self.assertIn("expected central file header signature not found", run.errors)
+ # self.assertEqual(os.path.getsize(tmpdir+"/test"), 3)
+ self.assertFalse(os.path.exists(tmpdir+"/test"))
+ self.rm_testdir()
+ def test_65471(self):
+ """ unzzip-big -l $(CVE).zip """
+ tmpdir = self.testdir()
+ filename = self.zip_CVE_2018_39
+ file_url = self.url_CVE_2018_39
+ download_raw(file_url, filename, tmpdir)
+ if not os.path.isfile(os.path.join(tmpdir, filename)): self.skipTest("missing " + filename)
+ exe = self.bins("unzzip-big")
+ run = shell("{exe} -l {tmpdir}/{filename} ".format(**locals()),
+ returncodes = [0])
+ self.assertLess(len(run.output), 1)
+ #
+ run = shell("cd {tmpdir} && ../{exe} {filename} ".format(**locals()),
+ returncodes = [0])
+ self.assertLess(len(run.output), 30)
+ self.assertLess(len(errors(run.errors)), 1)
+ # self.assertEqual(os.path.getsize(tmpdir+"/test"), 3)
+ self.assertFalse(os.path.exists(tmpdir+"/test"))
+ self.rm_testdir()
+ def test_65472(self):
+ """ unzzip-mem -l $(CVE).zip """
+ tmpdir = self.testdir()
+ filename = self.zip_CVE_2018_39
+ file_url = self.url_CVE_2018_39
+ download_raw(file_url, filename, tmpdir)
+ if not os.path.isfile(os.path.join(tmpdir, filename)): self.skipTest("missing " + filename)
+ exe = self.bins("unzzip-mem")
+ run = shell("{exe} -l {tmpdir}/{filename} ".format(**locals()),
+ returncodes = [0])
+ self.assertLess(len(run.output), 200)
+ self.assertLess(len(errors(run.errors)), 1)
+ #
+ run = shell("cd {tmpdir} && ../{exe} {filename} ".format(**locals()),
+ returncodes = [0])
+ self.assertLess(len(run.output), 200)
+ self.assertLess(len(errors(run.errors)), 10)
+ # self.assertEqual(os.path.getsize(tmpdir+"/test"), 3)
+ self.assertFalse(os.path.exists(tmpdir+"/test"))
+ #
+ run = shell("cd {tmpdir} && ../{exe} -p {filename} ".format(**locals()),
+ returncodes = [0])
+ # self.rm_testdir()
+ def test_65473(self):
+ """ unzzip-mix -l $(CVE).zip """
+ tmpdir = self.testdir()
+ filename = self.zip_CVE_2018_39
+ file_url = self.url_CVE_2018_39
+ download_raw(file_url, filename, tmpdir)
+ if not os.path.isfile(os.path.join(tmpdir, filename)): self.skipTest("missing " + filename)
+ exe = self.bins("unzzip-mix")
+ run = shell("{exe} -l {tmpdir}/{filename} ".format(**locals()),
+ returncodes = [0,2])
+ self.assertLess(len(run.output), 1)
+ self.assertTrue(greps(run.errors, "Invalid or"))
+ #
+ run = shell("cd {tmpdir} && ../{exe} {filename} ".format(**locals()),
+ returncodes = [0,2])
+ self.assertLess(len(run.output), 30)
+ self.assertTrue(greps(run.errors, "Invalid or"))
+ # self.assertEqual(os.path.getsize(tmpdir+"/test"), 3)
+ self.assertFalse(os.path.exists(tmpdir+"/test"))
+ self.rm_testdir()
+ def test_65474(self):
+ """ unzzip-zap -l $(CVE).zip """
+ tmpdir = self.testdir()
+ filename = self.zip_CVE_2018_39
+ file_url = self.url_CVE_2018_39
+ download_raw(file_url, filename, tmpdir)
+ if not os.path.isfile(os.path.join(tmpdir, filename)): self.skipTest("missing " + filename)
+ exe = self.bins("unzzip")
+ run = shell("{exe} -l {tmpdir}/{filename} ".format(**locals()),
+ returncodes = [0, 3])
+ self.assertLess(len(run.output), 1)
+ self.assertLess(len(errors(run.errors)), 200)
+ self.assertIn(": Success", run.errors)
+ #
+ run = shell("cd {tmpdir} && ../{exe} {filename} ".format(**locals()),
+ returncodes = [0,3])
+ self.assertLess(len(run.output), 30)
+ self.assertTrue(greps(run.errors, "Zipfile corrupted"))
+ # self.assertEqual(os.path.getsize(tmpdir+"/test"), 3)
+ self.assertFalse(os.path.exists(tmpdir+"/test"))
+ self.rm_testdir()
+ def test_65479(self):
+ """ check $(CVE).zip """
+ tmpdir = self.testdir()
+ filename = self.zip_CVE_2018_39
+ file_url = self.url_CVE_2018_39
+ download_raw(file_url, filename, tmpdir)
+ if not os.path.isfile(os.path.join(tmpdir, filename)): self.skipTest("missing " + filename)
+ shell("ls -l {tmpdir}/{filename}".format(**locals()))
+ size = os.path.getsize(os.path.join(tmpdir, filename))
+ self.assertEqual(size, 82347)
+
+ url_CVE_2018_40 = "https://github.com/fantasy7082/image_test/blob/master"
+ zip_CVE_2018_40 = "002-mem-leaks-zip"
+ def test_65480(self):
+ """ info unzip -l $(CVE).zip """
+ tmpdir = self.testdir()
+ filename = self.zip_CVE_2018_40
+ file_url = self.url_CVE_2018_40
+ download_raw(file_url, filename, tmpdir)
+ exe = self.bins("unzip")
+ run = shell("{exe} -l {tmpdir}/{filename} ".format(**locals()),
+ returncodes = [0, 80])
+ self.assertIn("missing 21 bytes in zipfile", run.errors)
+ self.assertLess(len(run.output), 500)
+ self.assertLess(len(errors(run.errors)), 800)
+ #
+ run = shell("cd {tmpdir} && {exe} -o {filename}".format(**locals()),
+ returncodes = [3])
+ self.assertLess(len(run.output), 500)
+ self.assertLess(len(errors(run.errors)), 800)
+ self.assertIn("missing 21 bytes in zipfile", run.errors)
+ self.assertIn('expected central file header signature not found', run.errors)
+ # self.assertEqual(os.path.getsize(tmpdir+"/test"), 3)
+ self.assertFalse(os.path.exists(tmpdir+"/test"))
+ self.rm_testdir()
+ def test_65482(self):
+ """ unzzip-mem -l $(CVE).zip """
+ tmpdir = self.testdir()
+ filename = self.zip_CVE_2018_40
+ file_url = self.url_CVE_2018_40
+ download_raw(file_url, filename, tmpdir)
+ if not os.path.isfile(os.path.join(tmpdir, filename)): self.skipTest("missing " + filename)
+ exe = self.bins("unzzip-mem")
+ run = shell("{exe} -l {tmpdir}/{filename} ".format(**locals()),
+ returncodes = [0])
+ self.assertLess(len(run.output), 1500)
+ self.assertLess(len(errors(run.errors)), 1)
+ #
+ run = shell("cd {tmpdir} && ../{exe} {filename} ".format(**locals()),
+ returncodes = [0])
+ self.assertLess(len(run.output), 1500)
+ self.assertLess(len(errors(run.errors)), 10)
+ # self.assertEqual(os.path.getsize(tmpdir+"/test"), 3)
+ self.assertFalse(os.path.exists(tmpdir+"/test"))
+ #
+ run = shell("cd {tmpdir} && ../{exe} -p {filename} ".format(**locals()),
+ returncodes = [0])
+ self.rm_testdir()
+
def test_91000_zzshowme_check_sfx(self):
""" create an *.exe that can extract its own zip content """
exe=self.bins("mkzip")
@@ -3034,7 +3456,9 @@
if __name__ == "__main__":
import optparse
_o = optparse.OptionParser("%prog [options] test_xxx")
- _o.add_option("-b", "--topsrcdir", metavar="DIR", default=topsrcdir,
+ _o.add_option("-b", "--bindir", metavar="DIR", default=bindir,
+ help="path to the bindir to use [%default]")
+ _o.add_option("-s", "--topsrcdir", metavar="DIR", default=topsrcdir,
help="path to the top srcdir / unpack directory [%default]")
_o.add_option("-t", "--testdatadir", metavar="DIR", default=testdatadir,
help="path where temporary testdata is created [%default]")
Modified: trunk/Build/source/libs/zziplib/zziplib-src/zzip/Makefile.in
===================================================================
--- trunk/Build/source/libs/zziplib/zziplib-src/zzip/Makefile.in 2018-03-17 22:23:43 UTC (rev 47003)
+++ trunk/Build/source/libs/zziplib/zziplib-src/zzip/Makefile.in 2018-03-18 00:25:18 UTC (rev 47004)
@@ -1,7 +1,7 @@
-# Makefile.in generated by automake 1.13.4 from Makefile.am.
+# Makefile.in generated by automake 1.15.1 from Makefile.am.
# @configure_input@
-# Copyright (C) 1994-2013 Free Software Foundation, Inc.
+# Copyright (C) 1994-2017 Free Software Foundation, Inc.
# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
@@ -16,7 +16,17 @@
VPATH = @srcdir@
-am__is_gnu_make = test -n '$(MAKEFILE_LIST)' && test -n '$(MAKELEVEL)'
+am__is_gnu_make = { \
+ if test -z '$(MAKELEVEL)'; then \
+ false; \
+ elif test -n '$(MAKE_HOST)'; then \
+ true; \
+ elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \
+ true; \
+ else \
+ false; \
+ fi; \
+}
am__make_running_with_option = \
case $${target_option-} in \
?) ;; \
@@ -81,9 +91,6 @@
host_triplet = @host@
target_triplet = @target@
subdir = zzip
-DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/Makefile.am \
- $(top_srcdir)/uses/mkinstalldirs $(top_srcdir)/uses/depcomp \
- $(noinst_HEADERS) $(pkgconfig_HEADERS) $(zzip_HEADERS)
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
am__aclocal_m4_deps = $(top_srcdir)/m4/ac_compile_check_sizeof.m4 \
$(top_srcdir)/m4/ac_set_default_paths_system.m4 \
@@ -94,6 +101,7 @@
$(top_srcdir)/m4/ax_cflags_strict_prototypes.m4 \
$(top_srcdir)/m4/ax_cflags_warn_all.m4 \
$(top_srcdir)/m4/ax_check_aligned_access_required.m4 \
+ $(top_srcdir)/m4/ax_check_enable_debug.m4 \
$(top_srcdir)/m4/ax_configure_args.m4 \
$(top_srcdir)/m4/ax_create_pkgconfig_info.m4 \
$(top_srcdir)/m4/ax_enable_builddir.m4 \
@@ -116,6 +124,8 @@
$(top_srcdir)/configure.ac
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
$(ACLOCAL_M4)
+DIST_COMMON = $(srcdir)/Makefile.am $(noinst_HEADERS) \
+ $(pkgconfig_HEADERS) $(zzip_HEADERS) $(am__DIST_COMMON)
mkinstalldirs = $(SHELL) $(top_srcdir)/uses/mkinstalldirs
CONFIG_HEADER = $(top_builddir)/config.h
CONFIG_CLEAN_VPATH_FILES =
@@ -236,6 +246,8 @@
done | $(am__uniquify_input)`
ETAGS = etags
CTAGS = ctags
+am__DIST_COMMON = $(srcdir)/Makefile.in $(top_srcdir)/uses/depcomp \
+ $(top_srcdir)/uses/mkinstalldirs
DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
ACLOCAL = @ACLOCAL@
AMTAR = @AMTAR@
@@ -242,6 +254,8 @@
AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
AR = @AR@
AS = @AS@
+ASAN_CFLAGS = @ASAN_CFLAGS@
+ASAN_LIBS = @ASAN_LIBS@
AUTOCONF = @AUTOCONF@
AUTOHEADER = @AUTOHEADER@
AUTOMAKE = @AUTOMAKE@
@@ -281,8 +295,10 @@
LIPO = @LIPO@
LN_S = @LN_S@
LTLIBOBJS = @LTLIBOBJS@
+LT_SYS_LIBRARY_PATH = @LT_SYS_LIBRARY_PATH@
MAINT = @MAINT@
MAKEINFO = @MAKEINFO@
+MANIFEST_TOOL = @MANIFEST_TOOL@
MKDIR_P = @MKDIR_P@
MKZIP = @MKZIP@
NM = @NM@
@@ -329,6 +345,7 @@
abs_srcdir = @abs_srcdir@
abs_top_builddir = @abs_top_builddir@
abs_top_srcdir = @abs_top_srcdir@
+ac_ct_AR = @ac_ct_AR@
ac_ct_CC = @ac_ct_CC@
ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
aclocaldir = @aclocaldir@
@@ -363,7 +380,6 @@
libexecdir = @libexecdir@
localedir = @localedir@
localstatedir = @localstatedir@
-lt_ECHO = @lt_ECHO@
mandir = @mandir@
mkdir_p = @mkdir_p@
oldincludedir = @oldincludedir@
@@ -507,7 +523,6 @@
echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign zzip/Makefile'; \
$(am__cd) $(top_srcdir) && \
$(AUTOMAKE) --foreign zzip/Makefile
-.PRECIOUS: Makefile
Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
@case '$?' in \
*config.status*) \
@@ -594,7 +609,7 @@
@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
- at am__fastdepCC_FALSE@ $(AM_V_CC at am__nodep@)$(COMPILE) -c $<
+ at am__fastdepCC_FALSE@ $(AM_V_CC at am__nodep@)$(COMPILE) -c -o $@ $<
.c.obj:
@am__fastdepCC_TRUE@ $(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'`
@@ -601,7 +616,7 @@
@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
- at am__fastdepCC_FALSE@ $(AM_V_CC at am__nodep@)$(COMPILE) -c `$(CYGPATH_W) '$<'`
+ at am__fastdepCC_FALSE@ $(AM_V_CC at am__nodep@)$(COMPILE) -c -o $@ `$(CYGPATH_W) '$<'`
.c.lo:
@am__fastdepCC_TRUE@ $(AM_V_CC)$(LTCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
@@ -872,7 +887,9 @@
uninstall-am uninstall-libLTLIBRARIES uninstall-local \
uninstall-pkgconfigHEADERS uninstall-zzipHEADERS
+.PRECIOUS: Makefile
+
# here is some backward compatibility with version 0.10.* of zziplib
install-data-hook : install-zzipHEADERS
echo '#ifndef ZZIP_WARNING' > $(DESTDIR)$(includedir)/zzip.h
Modified: trunk/Build/source/libs/zziplib/zziplib-src/zzip/__fnmatch.h
===================================================================
--- trunk/Build/source/libs/zziplib/zziplib-src/zzip/__fnmatch.h 2018-03-17 22:23:43 UTC (rev 47003)
+++ trunk/Build/source/libs/zziplib/zziplib-src/zzip/__fnmatch.h 2018-03-18 00:25:18 UTC (rev 47004)
@@ -7,20 +7,43 @@
#include <string.h>
#ifdef ZZIP_HAVE_FNMATCH_H
-#include <fnmatch.h>
-#endif
-
-#ifdef ZZIP_HAVE_FNMATCH_H
-#define _zzip_fnmatch fnmatch
+# include <fnmatch.h>
+# define _zzip_fnmatch fnmatch
# ifdef FNM_CASEFOLD
# define _zzip_FNM_CASEFOLD FNM_CASEFOLD
# else
# define _zzip_FNM_CASEFOLD 0
# endif
+# ifdef FNM_NOESCAPE
+# define _zzip_FNM_NOESCAPE FNM_NOESCAPE
+# else
+# define _zzip_FNM_NOESCAPE 0
+# endif
+# ifdef FNM_PATHNAME
+# define _zzip_FNM_PATHNAME FNM_PATHNAME
+# else
+# define _zzip_FNM_PATHNAME 0
+# endif
+# ifdef FNM_PERIOD
+# define _zzip_FNM_PERIOD FNM_PERIOD
+# else
+# define _zzip_FNM_PERIOD 0
+# endif
+
#else
+/* if your system does not have fnmatch, we fall back to strcmp: */
+static int _zzip_fnmatch(char* pattern, char* string, int flags)
+{
+# ifdef DBG2
+ DBG1("<zzip:mmapped:strcmp>");
+# endif
+ return strcmp (pattern, string);
+}
+
# define _zzip_FNM_CASEFOLD 0
-/* if your system does not have fnmatch, we fall back to strcmp: */
-#define _zzip_fnmatch(x,y,z) strcmp ((x),(y))
+# define _zzip_FNM_NOESCAPE 0
+# define _zzip_FNM_PATHNAME 0
+# define _zzip_FNM_PERIOD 0
#endif
#endif
Modified: trunk/Build/source/libs/zziplib/zziplib-src/zzip/__mmap.h
===================================================================
--- trunk/Build/source/libs/zziplib/zziplib-src/zzip/__mmap.h 2018-03-17 22:23:43 UTC (rev 47003)
+++ trunk/Build/source/libs/zziplib/zziplib-src/zzip/__mmap.h 2018-03-18 00:25:18 UTC (rev 47004)
@@ -44,8 +44,7 @@
#ifndef MAP_FAILED
#define MAP_FAILED 0
#endif
-/* we (ab)use the "*user" variable to store the FileMapping handle */
- /* and make sure (sizeof(*user) == sizeof(HANDLE)) */
+/* we had used the plugin->sys variable for (user) but not anymore */
static size_t win32_getpagesize (void)
{
@@ -52,54 +51,35 @@
SYSTEM_INFO si; GetSystemInfo (&si);
return si.dwAllocationGranularity;
}
-#ifdef _WIN64
-static void* win32_mmap (__int64* user, int fd, zzip_off_t offs, size_t len)
-#else
static void* win32_mmap (long* user, int fd, zzip_off_t offs, size_t len)
-#endif
{
if (! user || *user != 1) /* || offs % getpagesize() */
return 0;
{
HANDLE hFile = (HANDLE)_get_osfhandle(fd);
+ HANDLE fileMapping = NULL;
if (hFile)
-#ifdef _WIN64
- *user = (__int64) CreateFileMapping (hFile, 0, PAGE_READONLY, 0, 0, NULL);
-#else
- *user = (long) CreateFileMapping (hFile, 0, PAGE_READONLY, 0, 0, NULL);
-#endif
- if (*user)
+ fileMapping = CreateFileMapping (hFile, 0, PAGE_READONLY, 0, 0, NULL);
+ if (fileMapping != NULL)
{
- char* p = 0;
- p = MapViewOfFile(*(HANDLE*)user, FILE_MAP_READ, 0, offs, len);
+ char* p = MapViewOfFile(fileMapping, FILE_MAP_READ, 0, offs, len);
+ CloseHandle (fileMapping); *user = 1;
if (p) return p;
- CloseHandle (*(HANDLE*)user); *user = 1;
}
return MAP_FAILED;
}
}
-#ifdef _WIN64
-static void win32_munmap (__int64* user, char* fd_map, size_t len)
-#else
static void win32_munmap (long* user, char* fd_map, size_t len)
-#endif
{
UnmapViewOfFile (fd_map);
- CloseHandle (*(HANDLE*)user); *user = 1;
}
-#ifdef _WIN64
#define _zzip_mmap(user, fd, offs, len) \
- win32_mmap ((__int64*) &(user), fd, offs, len)
-#define _zzip_munmap(user, ptr, len) \
- win32_munmap ((__int64*) &(user), ptr, len)
-#else
-#define _zzip_mmap(user, fd, offs, len) \
win32_mmap ((long*) &(user), fd, offs, len)
#define _zzip_munmap(user, ptr, len) \
win32_munmap ((long*) &(user), ptr, len)
-#endif
#define _zzip_getpagesize(user) win32_getpagesize()
+
#else /* disable */
#define USE_MMAP 0
/* USE_MAP is intentional: we expect the compiler to do some "code removal"
Modified: trunk/Build/source/libs/zziplib/zziplib-src/zzip/__string.h
===================================================================
--- trunk/Build/source/libs/zziplib/zziplib-src/zzip/__string.h 2018-03-17 22:23:43 UTC (rev 47003)
+++ trunk/Build/source/libs/zziplib/zziplib-src/zzip/__string.h 2018-03-18 00:25:18 UTC (rev 47004)
@@ -13,21 +13,25 @@
#include <strings.h>
#endif
+#if defined ZZIP_HAVE_STRNLEN || defined strnlen
+#define _zzip_strnlen strnlen
+#else
+#include <stdlib.h>
+/* if your system does not have strnlen: */
+zzip__new__ static size_t
+_zzip_strnlen(const char *p, size_t maxlen)
+{
+ const char * stop = (char *)memchr(p, '\0', maxlen);
+ return stop ? stop - p : maxlen;
+}
+#endif
+
+
#if defined ZZIP_HAVE_STRNDUP || defined strndup
#define _zzip_strndup strndup
#else
-static size_t my_strnlen(const char* str, size_t maxlen)
-{
- char *p = memchr(str, 0, maxlen);
- if (p == NULL)
- return maxlen;
- else
- return (p - str);
-}
-#define strnlen(x,y) my_strnlen((x),(y))
-
/* if your system does not have strndup: */
zzip__new__ static char *
_zzip_strndup(char const *p, size_t maxlen)
@@ -37,7 +41,7 @@
return p;
} else
{
- size_t len = strnlen(p, maxlen);
+ size_t len = _zzip_strnlen(p, maxlen);
char* r = malloc(len + 1);
if (r == NULL)
return NULL; /* errno = ENOMEM */
Modified: trunk/Build/source/libs/zziplib/zziplib-src/zzip/dir.c
===================================================================
--- trunk/Build/source/libs/zziplib/zziplib-src/zzip/dir.c 2018-03-17 22:23:43 UTC (rev 47003)
+++ trunk/Build/source/libs/zziplib/zziplib-src/zzip/dir.c 2018-03-18 00:25:18 UTC (rev 47004)
@@ -37,7 +37,8 @@
# endif
#endif
-/**
+/** rewind.
+ *
* This function is the equivalent of a => rewinddir(2) for a realdir or
* the zipfile in place of a directory. The ZZIP_DIR handle returned from
* => zzip_opendir has a flag saying realdir or zipfile. As for a zipfile,
@@ -105,7 +106,8 @@
}
#endif
-/**
+/** read dir.
+ *
* This function is the equivalent of a => readdir(2) for a realdir
* or a zipfile referenced by the ZZIP_DIR returned from => zzip_opendir.
*
@@ -216,15 +218,17 @@
}
#if defined ZZIP_LARGEFILE_RENAME && defined EOVERFLOW && defined PIC
+/* DLL compatibility layer - so that 32bit code can link with a 64on32 too */
+
#undef zzip_seekdir /* zzip_seekdir64 */
#undef zzip_telldir /* zzip_telldir64 */
-/* DLL compatibility layer - so that 32bit code can link with a 64on32 too */
long zzip_telldir(ZZIP_DIR * dir) { return zzip_telldir32(dir); }
void zzip_seekdir(ZZIP_DIR * dir, long offset) { zzip_seekdir32(dir, offset); }
#endif
-/**
+/** start usage.
+ *
* This function is the equivalent of => opendir(3) for a realdir or zipfile.
*
* This function has some magic - if the given argument-path
@@ -293,7 +297,8 @@
return dir;
}
-/**
+/** stop usage.
+ *
* This function is the equivalent of => closedir(3) for a realdir or zipfile.
*
* This function is magic - if the given arg-ZZIP_DIR
Modified: trunk/Build/source/libs/zziplib/zziplib-src/zzip/fetch.c
===================================================================
--- trunk/Build/source/libs/zziplib/zziplib-src/zzip/fetch.c 2018-03-17 22:23:43 UTC (rev 47003)
+++ trunk/Build/source/libs/zziplib/zziplib-src/zzip/fetch.c 2018-03-18 00:25:18 UTC (rev 47004)
@@ -14,7 +14,7 @@
/* ------------------------- fetch helpers --------------------------------- */
-/**
+/** internal.
* Make 32 bit value in host byteorder from little-endian mapped octet-data
* (works also on machines which SIGBUS on misaligned data access (eg. 68000))
*/
Modified: trunk/Build/source/libs/zziplib/zziplib-src/zzip/file.c
===================================================================
--- trunk/Build/source/libs/zziplib/zziplib-src/zzip/file.c 2018-03-17 22:23:43 UTC (rev 47003)
+++ trunk/Build/source/libs/zziplib/zziplib-src/zzip/file.c 2018-03-18 00:25:18 UTC (rev 47004)
@@ -30,8 +30,8 @@
#define tells(fd) seeks(fd,0,SEEK_CUR)
#endif
-/**
- * the direct function of => zzip_close(fp). it will cleanup the
+/** end usage.
+ * This function is the direct call of => zzip_close(fp). It will cleanup the
* inflate-portion of => zlib and free the structure given.
*
* it is called quite from the error-cleanup parts
@@ -163,9 +163,9 @@
static int zzip_inflate_init(ZZIP_FILE *, struct zzip_dir_hdr *);
-/**
- * open an => ZZIP_FILE from an already open => ZZIP_DIR handle. Since
- * we have a chance to reuse a cached => buf32k and => ZZIP_FILE memchunk
+/** start usage.
+ * This function opens an => ZZIP_FILE from an already open => ZZIP_DIR handle.
+ * Since we have a chance to reuse a cached => buf32k and => ZZIP_FILE memchunk
* this is the best choice to unpack multiple files.
*
* Note: the zlib supports 2..15 bit windowsize, hence we provide a 32k
@@ -305,7 +305,7 @@
return NULL;
}
-/**
+/** internal.
* call => inflateInit and setup fp's iterator variables,
* used by lowlevel => _open functions.
*/
@@ -334,7 +334,7 @@
return err;
}
-/**
+/** end usage.
* This function closes the given ZZIP_FILE handle.
*
* If the ZZIP_FILE wraps a normal stat'fd then it is just that int'fd
@@ -359,10 +359,10 @@
return zzip_fclose(fp);
}
-/**
- * This functions read data from zip-contained file.
+/** read data.
+ * This function reads data from zip-contained file.
*
- * It works like => read(2) and will fill the given buffer with bytes from
+ * This fuction works like => read(2) and will fill the given buffer with bytes from
* the opened file. It will return the number of bytes read, so if the => EOF
* is encountered you will be prompted with the number of bytes actually read.
*
@@ -456,11 +456,11 @@
}
}
-/**
+/** read data.
* This function will read(2) data from a real/zipped file.
*
- * the replacement for => read(2) will fill the given buffer with bytes from
- * the opened file. It will return the number of bytes read, so if the EOF
+ * This function is the replacement for => read(2) will fill the given buffer with
+ * bytes from the opened file. It will return the number of bytes read, so if the EOF
* is encountered you will be prompted with the number of bytes actually read.
*
* If the file-handle is wrapping a stat'able file then it will actually just
@@ -515,7 +515,7 @@
/* ------------------------------------------------------------------- */
-/** also: fopen(2)
+/** start usage. also: fopen(2)
* This function will => fopen(3) a real/zipped file.
*
* It has some magic functionality builtin - it will first try to open
@@ -654,7 +654,7 @@
}
}
-/**
+/** start usage.
* This function will => open(2) a real/zipped file
*
* It has some magic functionality builtin - it will first try to open
@@ -864,6 +864,9 @@
}
#if defined ZZIP_LARGEFILE_RENAME && defined EOVERFLOW && defined PIC
+
+/* DLL compatibility layer - so that 32bit code can link with this lib too */
+
#undef zzip_open_shared_io /* zzip_open_shared_io64 */
#undef zzip_open_ext_io /* zzip_open_ext_io64 */
#undef zzip_opendir_ext_io /* zzip_opendir_ext_io64 */
@@ -878,8 +881,6 @@
ZZIP_DIR *zzip_opendir_ext_io(zzip_char_t * name, int o_modes,
zzip_strings_t * ext, zzip_plugin_io_t io);
-/* DLL compatibility layer - so that 32bit code can link with this lib too */
-
ZZIP_FILE *
zzip_open_shared_io(ZZIP_FILE * stream,
zzip_char_t * name, int o_flags,
@@ -915,7 +916,8 @@
/* ------------------------------------------------------------------- */
-/**
+/** rewind.
+ *
* This function will rewind a real/zipped file.
*
* It seeks to the beginning of this file's data in the zip,
@@ -975,7 +977,8 @@
return err;
}
-/**
+/** seek.
+ *
* This function will perform a => lseek(2) operation on a real/zipped file
*
* It will try to seek to the offset specified by offset, relative to whence,
@@ -1098,7 +1101,8 @@
return zzip_tell(fp);
}
-/**
+/** tell.
+ *
* This function will => tell(2) the current position in a real/zipped file
*
* It will return the current offset within the real/zipped file,
Modified: trunk/Build/source/libs/zziplib/zziplib-src/zzip/info.c
===================================================================
--- trunk/Build/source/libs/zziplib/zziplib-src/zzip/info.c 2018-03-17 22:23:43 UTC (rev 47003)
+++ trunk/Build/source/libs/zziplib/zziplib-src/zzip/info.c 2018-03-18 00:25:18 UTC (rev 47004)
@@ -17,8 +17,8 @@
#include <stdio.h>
#endif
-/**
- * just returns dir->errcode of the ZZIP_DIR handle
+/** get errror status.
+ * This function just returns dir->errcode of the ZZIP_DIR handle
* see: => zzip_dir_open, => zzip_dir_open, => zzip_readdir, => zzip_dir_read
*/
int
@@ -33,8 +33,8 @@
void
zzip_seterror(ZZIP_DIR * dir, int errcode) { dir->errcode = errcode; }
-/**
- * This function will just return fp->dir
+/** get handle.
+ * This function will just return the fp->dir value.
*
* If a ZZIP_FILE is contained within a zip-file that one will be a valid
* pointer, otherwise a NULL is returned and the ZZIP_FILE wraps a real file.
@@ -58,18 +58,19 @@
return dir->fd;
}
+#define LENGTH(x) (sizeof(x) / sizeof(*x))
static const char* comprlevel[] = {
"stored", "shrunk", "redu:1", "redu:2", "redu:3", "redu:4",
"impl:N", "toknze", "defl:N", "defl:B", "impl:B" };
-/**
- * return static const string of the known compression methods,
- * otherwise just "zipped" is returned
+/** compr name.
+ * This function returns the static const string of the known compression methods,
+ * Unknown id values will return just "zipped" as the string code.
*/
zzip_char_t *
zzip_compr_str(int compr)
{
- if (0 <= compr && compr < sizeof(comprlevel))
+ if (0 <= compr && compr < LENGTH(comprlevel))
{
return comprlevel[compr];
} else if (0 < compr && compr < 256)
@@ -110,7 +111,7 @@
return dir->realdir != 0;
}
-/**
+/** check real or zipped file.
* This function checks if the ZZIP_FILE-handle is wrapping
* a real file or a zip-contained file.
* Returns 1 for a stat'able file, and 0 for a file inside a zip-archive.
Modified: trunk/Build/source/libs/zziplib/zziplib-src/zzip/lib.h
===================================================================
--- trunk/Build/source/libs/zziplib/zziplib-src/zzip/lib.h 2018-03-17 22:23:43 UTC (rev 47003)
+++ trunk/Build/source/libs/zziplib/zziplib-src/zzip/lib.h 2018-03-18 00:25:18 UTC (rev 47004)
@@ -16,7 +16,6 @@
#include <zzip/zzip.h>
#include <zzip/plugin.h>
#include <zzip/stdint.h>
-#include <zzip/zzip32.h>
#ifdef __cplusplus
extern "C" {
Modified: trunk/Build/source/libs/zziplib/zziplib-src/zzip/memdisk.c
===================================================================
--- trunk/Build/source/libs/zziplib/zziplib-src/zzip/memdisk.c 2018-03-17 22:23:43 UTC (rev 47003)
+++ trunk/Build/source/libs/zziplib/zziplib-src/zzip/memdisk.c 2018-03-18 00:25:18 UTC (rev 47004)
@@ -69,6 +69,9 @@
static void
zzip_mem_entry_free(ZZIP_MEM_ENTRY * _zzip_restrict item);
+/** => zzip_mem_disk_open
+ * This function is internally used to prepare opening a disk.
+ */
zzip__new__ ZZIP_MEM_DISK *
zzip_mem_disk_new(void)
{
@@ -76,7 +79,8 @@
}
/** create new diskdir handle.
- * wraps underlying zzip_disk_open. */
+ * This function wraps underlying zzip_disk_open.
+ */
zzip__new__ ZZIP_MEM_DISK *
zzip_mem_disk_open(char *filename)
{
@@ -95,8 +99,9 @@
____;
}
-/** create new diskdir handle.
- * wraps underlying zzip_disk_open. */
+/** => zzip_mem_disk_open
+ * This function wraps the underlying zzip_disk_open.
+ */
zzip__new__ ZZIP_MEM_DISK *
zzip_mem_disk_fdopen(int fd)
{
@@ -116,7 +121,8 @@
}
/** create new diskdir handle.
- * wraps underlying zzip_disk_buffer. */
+ * This function wraps underlying zzip_disk_buffer.
+ */
zzip__new__ ZZIP_MEM_DISK *
zzip_mem_disk_buffer(char *buffer, size_t buflen)
{
@@ -148,6 +154,7 @@
zzip_mem_disk_unload(dir);
___ long count = 0;
___ struct zzip_disk_entry *entry = zzip_disk_findfirst(disk);
+ if (!entry) goto error;
for (; entry; entry = zzip_disk_findnext(disk, entry))
{
ZZIP_MEM_ENTRY *item = zzip_mem_entry_new(disk, entry);
@@ -298,7 +305,8 @@
return zzip_mem_entry_find_extra_block(entry, datatype, 16);
}
-/* find an extra block for the given datatype code.
+/* get extra block.
+ * This function finds an extra block for the given datatype code.
* The returned EXTRA_BLOCK is still in disk-encoding but
* already a pointer into an allocated heap space block.
*
@@ -315,7 +323,14 @@
char* ext_end = ext + entry->zz_extlen[i];
if (ext)
{
- while (ext + zzip_extra_block_headerlength <= ext_end)
+ /*
+ * Make sure that
+ * 1) the extra block header
+ * AND
+ * 2) the block we're looking for
+ * fit into the extra block!
+ */
+ while (ext + zzip_extra_block_headerlength + blocksize <= ext_end)
{
if (datatype == zzip_extra_block_get_datatype(ext))
{
@@ -337,6 +352,9 @@
}
}
+/** => zzip_mem_disk_unload
+ * This function ends usage of a file entry in a disk.
+ */
void
zzip_mem_entry_free(ZZIP_MEM_ENTRY * _zzip_restrict item)
{
@@ -353,6 +371,9 @@
}
}
+/* => zzip_mem_disk_close
+ * This function will trigger an underlying disk_close
+ */
void
zzip_mem_disk_unload(ZZIP_MEM_DISK * dir)
{
@@ -368,6 +389,9 @@
dir->disk = 0;
}
+/* end usage.
+ * This function closes the dir and disk handles.
+ */
void
zzip_mem_disk_close(ZZIP_MEM_DISK * _zzip_restrict dir)
{
@@ -431,6 +455,9 @@
}
#endif
+/** search entries.
+ * This function walks through the zip directory looking for a file.
+ */
ZZIP_MEM_ENTRY *
zzip_mem_disk_findfile(ZZIP_MEM_DISK * dir,
char *filename, ZZIP_MEM_ENTRY * after,
@@ -449,6 +476,9 @@
return 0;
}
+/* => zzip_mem_disk_findfile
+ * This function uses an fnmatch-like comparator to find files.
+ */
ZZIP_MEM_ENTRY *
zzip_mem_disk_findmatch(ZZIP_MEM_DISK * dir,
char *filespec, ZZIP_MEM_ENTRY * after,
@@ -467,6 +497,9 @@
return 0;
}
+/** start usage.
+ * This function opens a referenced file entry from a openend disk.
+ */
zzip__new__ ZZIP_MEM_DISK_FILE *
zzip_mem_entry_fopen(ZZIP_MEM_DISK * dir, ZZIP_MEM_ENTRY * entry)
{
@@ -488,13 +521,25 @@
file->zlib.avail_in = zzip_mem_entry_csize(entry);
file->zlib.next_in = zzip_mem_entry_to_data(entry);
+ debug2("compressed size %i", (int) file->zlib.avail_in);
+ if (file->zlib.next_in + file->zlib.avail_in >= file->endbuf)
+ goto error;
+ if (file->zlib.next_in < file->buffer)
+ goto error;
+
if (! zzip_mem_entry_data_deflated(entry) ||
inflateInit2(&file->zlib, -MAX_WBITS) != Z_OK)
{ free (file); return 0; }
return file;
+error:
+ errno = EBADMSG;
+ return NULL;
}
+/** => zzip_mem_entry_open
+ * This function opens a file by name from an openend disk.
+ */
zzip__new__ ZZIP_MEM_DISK_FILE *
zzip_mem_disk_fopen(ZZIP_MEM_DISK * dir, char *filename)
{
@@ -505,6 +550,9 @@
return zzip_mem_entry_fopen(dir, entry);
}
+/** get data
+ * This function mimics the fread(2) behaviour.
+ */
_zzip_size_t
zzip_mem_disk_fread(void *ptr, _zzip_size_t size, _zzip_size_t nmemb,
ZZIP_MEM_DISK_FILE * file)
@@ -512,6 +560,9 @@
return zzip_disk_fread(ptr, size, nmemb, file);
}
+/** close disk.
+ * This function mimics the fclose(2) behaviour.
+ */
int
zzip_mem_disk_fclose(ZZIP_MEM_DISK_FILE * file)
{
@@ -518,6 +569,9 @@
return zzip_disk_fclose(file);
}
+/** check disk.
+ * This function mimics the feof(2) behaviour.
+ */
int
zzip_mem_disk_feof(ZZIP_MEM_DISK_FILE * file)
{
@@ -524,7 +578,9 @@
return zzip_disk_feof(file);
}
-/* convert dostime of entry to unix time_t */
+/** helper.
+ * This function converts a zip dostime of an entry to unix time_t
+ */
long
zzip_disk_entry_get_mktime(ZZIP_DISK_ENTRY * entry)
{
Modified: trunk/Build/source/libs/zziplib/zziplib-src/zzip/mmapped.c
===================================================================
--- trunk/Build/source/libs/zziplib/zziplib-src/zzip/mmapped.c 2018-03-17 22:23:43 UTC (rev 47003)
+++ trunk/Build/source/libs/zziplib/zziplib-src/zzip/mmapped.c 2018-03-18 00:25:18 UTC (rev 47004)
@@ -414,16 +414,19 @@
for (; p >= disk->buffer; p--)
{
zzip_byte_t *root; /* (struct zzip_disk_entry*) */
+ zzip_size_t rootsize; /* Size of root central directory */
+
if (zzip_disk_trailer_check_magic(p))
{
struct zzip_disk_trailer *trailer = (struct zzip_disk_trailer *) p;
zzip_size_t rootseek = zzip_disk_trailer_get_rootseek(trailer);
+ rootsize = zzip_disk_trailer_get_rootsize(trailer);
+
root = disk->buffer + rootseek;
DBG2("disk rootseek at %lli", (long long)rootseek);
if (root > p)
{
/* the first disk_entry is after the disk_trailer? can't be! */
- zzip_size_t rootsize = zzip_disk_trailer_get_rootsize(trailer);
DBG2("have rootsize at %lli", (long long)rootsize);
if (disk->buffer + rootsize > p)
continue;
@@ -442,6 +445,7 @@
return 0;
}
zzip_size_t rootseek = zzip_disk64_trailer_get_rootseek(trailer);
+ rootsize = zzip_disk64_trailer_get_rootsize(trailer);
DBG2("disk64 rootseek at %lli", (long long)rootseek);
root = disk->buffer + rootseek;
if (root > p)
@@ -458,6 +462,12 @@
errno = EBADMSG;
return 0;
}
+ if (root >= disk->endbuf || (root + rootsize) >= disk->endbuf)
+ {
+ DBG1("root behind endbuf should be impossible");
+ errno = EBADMSG;
+ return 0;
+ }
if (zzip_disk_entry_check_magic(root))
{
DBG2("found the disk root %p", root);
@@ -644,6 +654,8 @@
DBG2("compressed size %i", (int) file->zlib.avail_in);
if (file->zlib.next_in + file->zlib.avail_in >= disk->endbuf)
goto error;
+ if (file->zlib.next_in < disk->buffer)
+ goto error;
if (! zzip_file_header_data_deflated(header))
goto error;
Modified: trunk/Build/source/libs/zziplib/zziplib-src/zzip/mmapped.h
===================================================================
--- trunk/Build/source/libs/zziplib/zziplib-src/zzip/mmapped.h 2018-03-17 22:23:43 UTC (rev 47003)
+++ trunk/Build/source/libs/zziplib/zziplib-src/zzip/mmapped.h 2018-03-18 00:25:18 UTC (rev 47004)
@@ -37,11 +37,7 @@
void* reserved; /* - for later extensions (might be renamed) */
void* user; /* - free for applications (use this!) */
long flags; /* bit 0: findfile searches case-insensitive */
-#ifdef _WIN64
- __int64 mapped;
-#else
long mapped; /* used for mmap() wrappers of zzip/__mmap.h */
-#endif
long unused; /* - for later extensions (might be renamed) */
long code; /* - free for applications (use this!) */
};
Modified: trunk/Build/source/libs/zziplib/zziplib-src/zzip/plugin.c
===================================================================
--- trunk/Build/source/libs/zziplib/zziplib-src/zzip/plugin.c 2018-03-17 22:23:43 UTC (rev 47003)
+++ trunk/Build/source/libs/zziplib/zziplib-src/zzip/plugin.c 2018-03-18 00:25:18 UTC (rev 47004)
@@ -21,6 +21,9 @@
#include <zzip/file.h>
#include <zzip/format.h>
+/** get file size.
+ * This function works on a real file descriptor.
+ */
zzip_off_t
zzip_filesize(int fd)
{
@@ -59,7 +62,8 @@
return (zzip_plugin_io_t) & default_io;
}
-/**
+/** init plugin struct.
+ *
* This function initializes the users handler struct to default values
* being the posix io functions in default configured environments.
*
Modified: trunk/Build/source/libs/zziplib/zziplib-src/zzip/plugin.h
===================================================================
--- trunk/Build/source/libs/zziplib/zziplib-src/zzip/plugin.h 2018-03-17 22:23:43 UTC (rev 47003)
+++ trunk/Build/source/libs/zziplib/zziplib-src/zzip/plugin.h 2018-03-18 00:25:18 UTC (rev 47004)
@@ -42,11 +42,7 @@
zzip_ssize_t (*read)(int fd, void* buf, zzip_size_t len);
zzip_off_t (*seeks)(int fd, zzip_off_t offset, int whence);
zzip_off_t (*filesize)(int fd);
-#ifdef _WIN64
- __int64 sys;
-#else
long sys;
-#endif
long type;
zzip_ssize_t (*write)(int fd, _zzip_const void* buf, zzip_size_t len);
};
Modified: trunk/Build/source/libs/zziplib/zziplib-src/zzip/stat.c
===================================================================
--- trunk/Build/source/libs/zziplib/zziplib-src/zzip/stat.c 2018-03-17 22:23:43 UTC (rev 47003)
+++ trunk/Build/source/libs/zziplib/zziplib-src/zzip/stat.c 2018-03-18 00:25:18 UTC (rev 47004)
@@ -24,9 +24,9 @@
#define ZZIP_USE_INTERNAL
#include <zzip/info.h>
-/**
- * obtain information about a filename in an opened zip-archive without
- * opening that file first. Mostly used to obtain the uncompressed
+/** get meta infornation on a zipped element.
+ * This function obtains information about a filename in an opened zip-archive
+ * without opening that file first. Mostly used to obtain the uncompressed
* size of a file inside a zip-archive. see => zzip_dir_open.
*/
int
Modified: trunk/Build/source/libs/zziplib/zziplib-src/zzip/stdint.h
===================================================================
--- trunk/Build/source/libs/zziplib/zziplib-src/zzip/stdint.h 2018-03-17 22:23:43 UTC (rev 47003)
+++ trunk/Build/source/libs/zziplib/zziplib-src/zzip/stdint.h 2018-03-18 00:25:18 UTC (rev 47004)
@@ -38,8 +38,19 @@
typedef unsigned long uint32_t; typedef signed long int32_t;
# endif
+/* either (long long) on Unix or (__int64) on Windows */
typedef unsigned _zzip___int64 uint64_t; typedef _zzip___int64 int64_t;
-#endif
+# if defined ZZIP_SIZEOF_INT_P
+# if ZZIP_SIZEOF_INT_P == ZZIP_SIZEOF_LONG+0
+ typedef long intptr_t;
+# elif ZZIP_SIZEOF_INT_P == ZZIP_SIZEOF_INT+0
+ typedef int intptr_t;
+# else
+ typedef int64_t intptr_t;
+# endif
+# endif
+
+#endif /* ZZIP_HAVE_... */
#endif /*_ZZIP_STDINT_H*/
Modified: trunk/Build/source/libs/zziplib/zziplib-src/zzip/zip.c
===================================================================
--- trunk/Build/source/libs/zziplib/zziplib-src/zzip/zip.c 2018-03-17 22:23:43 UTC (rev 47003)
+++ trunk/Build/source/libs/zziplib/zziplib-src/zzip/zip.c 2018-03-18 00:25:18 UTC (rev 47004)
@@ -1,4 +1,3 @@
-
/*
* Author:
* Guido Draheim <guidod at gmx.de>
@@ -91,7 +90,7 @@
#ifdef ZZIP_HARDEN
-/*
+/* internal.
* check for inconsistent values in trailer and prefer lower seek value
* - we fix values assuming the root directory was written at the end
* and it is just before the zip trailer. Therefore, ...
@@ -168,7 +167,7 @@
/* #define ZZIP_BUFSIZ 64 / * for testing */
#endif
-/**
+/** internal.
* This function is used by => zzip_file_open. It tries to find
* the zip's central directory info that is usually a few
* bytes off the end of the file.
@@ -318,6 +317,8 @@
trailer->zz_rootseek = zzip_disk_trailer_rootseek(orig);
trailer->zz_rootsize = zzip_disk_trailer_rootsize(orig);
# endif
+ if (trailer->zz_rootseek < 0 || trailer->zz_rootsize < 0)
+ return(ZZIP_CORRUPTED); // forged value
__fixup_rootseek(offset + tail - mapped, trailer);
/*
@@ -344,6 +345,8 @@
zzip_disk64_trailer_finalentries(orig);
trailer->zz_rootseek = zzip_disk64_trailer_rootseek(orig);
trailer->zz_rootsize = zzip_disk64_trailer_rootsize(orig);
+ if (trailer->zz_rootseek < 0 || trailer->zz_rootsize < 0)
+ return(ZZIP_CORRUPTED); // forged value
/*
* "extract data from files archived in a single zip file."
* So the file offsets must be within the current ZIP archive!
@@ -381,23 +384,19 @@
* making pointer alignments to values that can be handled as structures
* is tricky. We assume here that an align(4) is sufficient even for
* 64 bit machines. Note that binary operations are not usually allowed
- * to pointer types but we can cast the value to a suitably sized integer.
+ * to pointer types but we do need only the lower bits in this implementation,
+ * so we can just cast the value to a long value.
*/
_zzip_inline static char *
__zzip_aligned4(char *p)
{
#define aligned4 __zzip_aligned4
-#ifdef _WIN64
- p += ((__int64) p) & 1;
- p += ((__int64) p) & 2;
-#else
- p += ((long) p) & 1;
- p += ((long) p) & 2;
-#endif
+ p += ((intptr_t) p) & 1;
+ p += ((intptr_t) p) & 2;
return p;
}
-/**
+/** internal.
* This function is used by => zzip_file_open, it is usually called after
* => __zzip_find_disk_trailer. It will parse the zip's central directory
* information and create a zziplib private directory table in
@@ -422,6 +421,9 @@
zzip_off64_t zz_rootseek = _disk_trailer_rootseek(trailer);
__correct_rootseek(zz_rootseek, zz_rootsize, trailer);
+ if (zz_entries < 0 || zz_rootseek < 0 || zz_rootsize < 0)
+ return ZZIP_CORRUPTED;
+
hdr0 = (struct zzip_dir_hdr *) malloc(zz_rootsize);
if (! hdr0)
return ZZIP_DIRSIZE;
@@ -465,9 +467,10 @@
# endif
if (fd_map)
- { d = (void*)(fd_map+zz_fd_gap+zz_offset); } /* fd_map+fd_gap==u_rootseek */
- else
{
+ d = (void*)(fd_map+zz_fd_gap+zz_offset); /* fd_map+fd_gap==u_rootseek */
+ } else
+ {
if (io->fd.seeks(fd, zz_rootseek + zz_offset, SEEK_SET) < 0)
return ZZIP_DIR_SEEK;
if (io->fd.read(fd, &dirent, sizeof(dirent)) < __sizeof(dirent))
@@ -602,8 +605,8 @@
return ext;
}
-/**
- * allocate a new ZZIP_DIR handle and do basic
+/** start usage. also: zzip_dir_free
+ * This function allocates a new ZZIP_DIR handle and do basic
* initializations before usage by => zzip_dir_fdopen
* => zzip_dir_open => zzip_file_open or through
* => zzip_open
@@ -624,7 +627,7 @@
}
/** => zzip_dir_alloc_ext_io
- * this function is obsolete - it was generally used for implementation
+ * This function is obsolete - it was generally used for implementation
* and exported to let other code build on it. It is now advised to
* use => zzip_dir_alloc_ext_io now on explicitly, just set that second
* argument to zero to achieve the same functionality as the old style.
@@ -635,8 +638,8 @@
return zzip_dir_alloc_ext_io(fileext, 0);
}
-/**
- * will free the zzip_dir handle unless there are still
+/** => zzip_dir_alloc_ext_io
+ * This function will free the zzip_dir handle unless there are still
* zzip_files attached (that may use its cache buffer).
* This is the inverse of => zzip_dir_alloc , and both
* are helper functions used implicitly in other zzipcalls
@@ -677,9 +680,9 @@
return zzip_dir_free(dir);
}
-/**
- * used by the => zzip_dir_open and zzip_opendir(2) call. Opens the
- * zip-archive as specified with the fd which points to an
+/** fd reopen.
+ * This function is used by the => zzip_dir_open and zzip_opendir(2) call.
+ * Opens the zip-archive as specified with the fd which points to an
* already openend file. This function then search and parse
* the zip's central directory.
*
@@ -758,7 +761,7 @@
return rv;
}
-/**
+/** internal.
* This function will attach any of the .zip extensions then
* trying to open it the with => open(2). This is a helper
* function for => zzip_dir_open, => zzip_opendir and => zzip_open.
@@ -794,9 +797,9 @@
return -1;
}
-/**
- * Opens the zip-archive (if available).
- * the two ext_io arguments will default to use posix io and
+/** open zip-archive.
+ * This function opens the given zip-archive (if available).
+ * The two ext_io arguments will default to use posix io and
* a set of default fileext that can atleast add .zip ext itself.
*/
ZZIP_DIR *
Deleted: trunk/Build/source/libs/zziplib/zziplib-src/zzip/zzip-zlib-config.pc
===================================================================
--- trunk/Build/source/libs/zziplib/zziplib-src/zzip/zzip-zlib-config.pc 2018-03-17 22:23:43 UTC (rev 47003)
+++ trunk/Build/source/libs/zziplib/zziplib-src/zzip/zzip-zlib-config.pc 2018-03-18 00:25:18 UTC (rev 47004)
@@ -1,8 +0,0 @@
-zlib_libs= -lz
-zlib_cflags=
-
-Name: zzip-zlib-config
-Version: 1.2.8
-Description: ZLib Config (for ZZipLib)
-Libs: ${zlib_libs}
-Cflags: ${zlib_cflags}
Deleted: trunk/Build/source/libs/zziplib/zziplib-src/zzip/zzipfseeko.pc
===================================================================
--- trunk/Build/source/libs/zziplib/zziplib-src/zzip/zzipfseeko.pc 2018-03-17 22:23:43 UTC (rev 47003)
+++ trunk/Build/source/libs/zziplib/zziplib-src/zzip/zzipfseeko.pc 2018-03-18 00:25:18 UTC (rev 47004)
@@ -1,18 +0,0 @@
-# generated by configure / remove this line to disable regeneration
-prefix=/usr/local
-exec_prefix=${prefix}
-bindir=${exec_prefix}/bin
-libdir=${exec_prefix}/lib64
-datarootdir=${prefix}/share
-datadir=${datarootdir}
-sysconfdir=${prefix}/etc
-includedir=${prefix}/include
-package=zzipfseeko
-suffix=
-
-Name: zzipfseeko
-Description: ZZipLib - libZ-based ZIP-access Library with an Easy-to-Use API
-Version: 0.13.68
-Requires: zzip-zlib-config
-Libs: -L${libdir} -lzzipfseeko
-Cflags: -I${includedir}
Deleted: trunk/Build/source/libs/zziplib/zziplib-src/zzip/zziplib.pc
===================================================================
--- trunk/Build/source/libs/zziplib/zziplib-src/zzip/zziplib.pc 2018-03-17 22:23:43 UTC (rev 47003)
+++ trunk/Build/source/libs/zziplib/zziplib-src/zzip/zziplib.pc 2018-03-18 00:25:18 UTC (rev 47004)
@@ -1,18 +0,0 @@
-# generated by configure / remove this line to disable regeneration
-prefix=/usr/local
-exec_prefix=${prefix}
-bindir=${exec_prefix}/bin
-libdir=${exec_prefix}/lib64
-datarootdir=${prefix}/share
-datadir=${datarootdir}
-sysconfdir=${prefix}/etc
-includedir=${prefix}/include
-package=zziplib
-suffix=
-
-Name: zziplib
-Description: ZZipLib - libZ-based ZIP-access Library with an Easy-to-Use API
-Version: 0.13.68
-Requires: zzip-zlib-config
-Libs: -L${libdir} -lzzip
-Cflags: -I${includedir}
Deleted: trunk/Build/source/libs/zziplib/zziplib-src/zzip/zzipmmapped.pc
===================================================================
--- trunk/Build/source/libs/zziplib/zziplib-src/zzip/zzipmmapped.pc 2018-03-17 22:23:43 UTC (rev 47003)
+++ trunk/Build/source/libs/zziplib/zziplib-src/zzip/zzipmmapped.pc 2018-03-18 00:25:18 UTC (rev 47004)
@@ -1,18 +0,0 @@
-# generated by configure / remove this line to disable regeneration
-prefix=/usr/local
-exec_prefix=${prefix}
-bindir=${exec_prefix}/bin
-libdir=${exec_prefix}/lib64
-datarootdir=${prefix}/share
-datadir=${datarootdir}
-sysconfdir=${prefix}/etc
-includedir=${prefix}/include
-package=zzipmmapped
-suffix=
-
-Name: zzipmmapped
-Description: ZZipLib - libZ-based ZIP-access Library with an Easy-to-Use API
-Version: 0.13.68
-Requires: zzip-zlib-config
-Libs: -L${libdir} -lzzipmmapped
-Cflags: -I${includedir}
Modified: trunk/Build/source/libs/zziplib/zziplib-src/zziplib.spec
===================================================================
--- trunk/Build/source/libs/zziplib/zziplib-src/zziplib.spec 2018-03-17 22:23:43 UTC (rev 47003)
+++ trunk/Build/source/libs/zziplib/zziplib-src/zziplib.spec 2018-03-18 00:25:18 UTC (rev 47004)
@@ -1,7 +1,7 @@
# norootforbuild
Summary: ZZipLib - libZ-based ZIP-access Library with an Easy-to-Use API
Name: zziplib
-Version: 0.13.68
+Version: 0.13.69
Release: 1
License: LGPLv2.1+
Group: System/Libraries
Modified: trunk/Build/source/libs/zziplib/zziplib-src/zzipwrap/Makefile.in
===================================================================
--- trunk/Build/source/libs/zziplib/zziplib-src/zzipwrap/Makefile.in 2018-03-17 22:23:43 UTC (rev 47003)
+++ trunk/Build/source/libs/zziplib/zziplib-src/zzipwrap/Makefile.in 2018-03-18 00:25:18 UTC (rev 47004)
@@ -1,7 +1,7 @@
-# Makefile.in generated by automake 1.13.4 from Makefile.am.
+# Makefile.in generated by automake 1.15.1 from Makefile.am.
# @configure_input@
-# Copyright (C) 1994-2013 Free Software Foundation, Inc.
+# Copyright (C) 1994-2017 Free Software Foundation, Inc.
# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
@@ -17,7 +17,17 @@
VPATH = @srcdir@
-am__is_gnu_make = test -n '$(MAKEFILE_LIST)' && test -n '$(MAKELEVEL)'
+am__is_gnu_make = { \
+ if test -z '$(MAKELEVEL)'; then \
+ false; \
+ elif test -n '$(MAKE_HOST)'; then \
+ true; \
+ elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \
+ true; \
+ else \
+ false; \
+ fi; \
+}
am__make_running_with_option = \
case $${target_option-} in \
?) ;; \
@@ -83,9 +93,6 @@
target_triplet = @target@
noinst_PROGRAMS = zzipwrap$(EXEEXT)
subdir = zzipwrap
-DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/Makefile.am \
- $(top_srcdir)/uses/mkinstalldirs $(top_srcdir)/uses/depcomp \
- $(pkgconfig_HEADERS) $(zzip_HEADERS)
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
am__aclocal_m4_deps = $(top_srcdir)/m4/ac_compile_check_sizeof.m4 \
$(top_srcdir)/m4/ac_set_default_paths_system.m4 \
@@ -96,6 +103,7 @@
$(top_srcdir)/m4/ax_cflags_strict_prototypes.m4 \
$(top_srcdir)/m4/ax_cflags_warn_all.m4 \
$(top_srcdir)/m4/ax_check_aligned_access_required.m4 \
+ $(top_srcdir)/m4/ax_check_enable_debug.m4 \
$(top_srcdir)/m4/ax_configure_args.m4 \
$(top_srcdir)/m4/ax_create_pkgconfig_info.m4 \
$(top_srcdir)/m4/ax_enable_builddir.m4 \
@@ -118,6 +126,8 @@
$(top_srcdir)/configure.ac
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
$(ACLOCAL_M4)
+DIST_COMMON = $(srcdir)/Makefile.am $(pkgconfig_HEADERS) \
+ $(zzip_HEADERS) $(am__DIST_COMMON)
mkinstalldirs = $(SHELL) $(top_srcdir)/uses/mkinstalldirs
CONFIG_HEADER = $(top_builddir)/config.h
CONFIG_CLEAN_FILES =
@@ -230,6 +240,8 @@
done | $(am__uniquify_input)`
ETAGS = etags
CTAGS = ctags
+am__DIST_COMMON = $(srcdir)/Makefile.in $(top_srcdir)/uses/depcomp \
+ $(top_srcdir)/uses/mkinstalldirs
DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
ACLOCAL = @ACLOCAL@
AMTAR = @AMTAR@
@@ -236,6 +248,8 @@
AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
AR = @AR@
AS = @AS@
+ASAN_CFLAGS = @ASAN_CFLAGS@
+ASAN_LIBS = @ASAN_LIBS@
AUTOCONF = @AUTOCONF@
AUTOHEADER = @AUTOHEADER@
AUTOMAKE = @AUTOMAKE@
@@ -275,8 +289,10 @@
LIPO = @LIPO@
LN_S = @LN_S@
LTLIBOBJS = @LTLIBOBJS@
+LT_SYS_LIBRARY_PATH = @LT_SYS_LIBRARY_PATH@
MAINT = @MAINT@
MAKEINFO = @MAKEINFO@
+MANIFEST_TOOL = @MANIFEST_TOOL@
MKDIR_P = @MKDIR_P@
MKZIP = @MKZIP@
NM = @NM@
@@ -323,6 +339,7 @@
abs_srcdir = @abs_srcdir@
abs_top_builddir = @abs_top_builddir@
abs_top_srcdir = @abs_top_srcdir@
+ac_ct_AR = @ac_ct_AR@
ac_ct_CC = @ac_ct_CC@
ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
aclocaldir = @aclocaldir@
@@ -357,7 +374,6 @@
libexecdir = @libexecdir@
localedir = @localedir@
localstatedir = @localstatedir@
-lt_ECHO = @lt_ECHO@
mandir = @mandir@
mkdir_p = @mkdir_p@
oldincludedir = @oldincludedir@
@@ -421,7 +437,6 @@
echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign zzipwrap/Makefile'; \
$(am__cd) $(top_srcdir) && \
$(AUTOMAKE) --foreign zzipwrap/Makefile
-.PRECIOUS: Makefile
Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
@case '$?' in \
*config.status*) \
@@ -505,7 +520,7 @@
@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
- at am__fastdepCC_FALSE@ $(AM_V_CC at am__nodep@)$(COMPILE) -c $<
+ at am__fastdepCC_FALSE@ $(AM_V_CC at am__nodep@)$(COMPILE) -c -o $@ $<
.c.obj:
@am__fastdepCC_TRUE@ $(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'`
@@ -512,7 +527,7 @@
@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
- at am__fastdepCC_FALSE@ $(AM_V_CC at am__nodep@)$(COMPILE) -c `$(CYGPATH_W) '$<'`
+ at am__fastdepCC_FALSE@ $(AM_V_CC at am__nodep@)$(COMPILE) -c -o $@ `$(CYGPATH_W) '$<'`
.c.lo:
@am__fastdepCC_TRUE@ $(AM_V_CC)$(LTCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
@@ -780,7 +795,9 @@
uninstall-am uninstall-libLTLIBRARIES \
uninstall-pkgconfigHEADERS uninstall-zzipHEADERS
+.PRECIOUS: Makefile
+
../zzip/libzzip.la : @top_srcdir@/zzip/*.c
(cd ../zzip && $(MAKE) `basename $@`)
Modified: trunk/Build/source/libs/zziplib/zziplib-src/zzipwrap/zzipwrap.pc
===================================================================
--- trunk/Build/source/libs/zziplib/zziplib-src/zzipwrap/zzipwrap.pc 2018-03-17 22:23:43 UTC (rev 47003)
+++ trunk/Build/source/libs/zziplib/zziplib-src/zzipwrap/zzipwrap.pc 2018-03-18 00:25:18 UTC (rev 47004)
@@ -1,9 +1,9 @@
prefix=/usr/local
-libdir=/usr/local/lib64
+libdir=/usr/local/lib
includedir=/usr/local/include
Name: zzipwrap
-Version: 0.13.68
+Version: 0.13.24
Description: Callback Wrappers for ZZipLib
Requires: zziplib
Libs: -L${libdir} -lzzipwrap
More information about the tex-live-commits
mailing list