texlive[47500] Master/texmf-dist: latex2e (24apr18)
commits+karl at tug.org
commits+karl at tug.org
Mon Apr 30 01:33:08 CEST 2018
Revision: 47500
http://tug.org/svn/texlive?view=revision&revision=47500
Author: karl
Date: 2018-04-30 01:33:08 +0200 (Mon, 30 Apr 2018)
Log Message:
-----------
latex2e (24apr18)
Modified Paths:
--------------
trunk/Master/texmf-dist/doc/latex/base/changes.txt
trunk/Master/texmf-dist/doc/latex/base/docstrip.pdf
trunk/Master/texmf-dist/doc/latex/base/inputenc.pdf
trunk/Master/texmf-dist/doc/latex/base/latexchanges.pdf
trunk/Master/texmf-dist/doc/latex/base/latexchanges.tex
trunk/Master/texmf-dist/doc/latex/base/source2e.pdf
trunk/Master/texmf-dist/doc/latex/tools/changes.txt
trunk/Master/texmf-dist/doc/latex/tools/multicol.pdf
trunk/Master/texmf-dist/source/latex/base/docstrip.dtx
trunk/Master/texmf-dist/source/latex/base/inputenc.dtx
trunk/Master/texmf-dist/source/latex/base/ltclass.dtx
trunk/Master/texmf-dist/source/latex/base/ltcounts.dtx
trunk/Master/texmf-dist/source/latex/base/ltvers.dtx
trunk/Master/texmf-dist/source/latex/tools/multicol.dtx
trunk/Master/texmf-dist/tex/latex/base/docstrip.tex
trunk/Master/texmf-dist/tex/latex/base/latex.ltx
trunk/Master/texmf-dist/tex/latex/base/latexrelease.sty
trunk/Master/texmf-dist/tex/latex/tools/multicol.sty
Added Paths:
-----------
trunk/Master/texmf-dist/doc/latex/base/lppl.tex
trunk/Master/texmf-dist/doc/latex/base/source2e.tex
Removed Paths:
-------------
trunk/Master/texmf-dist/tex/latex/base/lppl.tex
trunk/Master/texmf-dist/tex/latex/base/source2e.tex
trunk/Master/texmf-dist/tex/latex/base/utf8-test.tex
trunk/Master/texmf-dist/tex/latex/base/utf8test.tex
trunk/Master/texmf-dist/tex/latex/tools/.tex
Modified: trunk/Master/texmf-dist/doc/latex/base/changes.txt
===================================================================
--- trunk/Master/texmf-dist/doc/latex/base/changes.txt 2018-04-29 23:31:02 UTC (rev 47499)
+++ trunk/Master/texmf-dist/doc/latex/base/changes.txt 2018-04-29 23:33:08 UTC (rev 47500)
@@ -5,6 +5,23 @@
=======================================================================
#########################
+# 2018-04-01 PL 3 Release
+#########################
+
+2018-04-22 Frank Mittelbach <Frank.Mittelbach at latex-project.org>
+
+ * ltcounts.dtx: added missing '.' in default for \the<counter>
+ when using \counterwithin (issue/38)
+
+2018-04-10 Frank Mittelbach <Frank.Mittelbach at latex-project.org>
+
+ * docstrip.dtx (subsection{Batchfile commands}): Read 8bit input
+ raw to leave high bits in the code to unchanged without utf8
+ handling (issue 34)
+ Without this change a dtx file with 8bit chars in the code need to
+ have \UseRawInputEncoding in the .ins file to work.
+
+#########################
# 2018-04-01 PL 2 Release
#########################
@@ -192,7 +209,7 @@
* ltoutenc.dtx: Guard against empty base in
\DeclareTextCompositeCommand, and \add at unicode@accent.
- Declare \^{} and \~{} in tuenc.def.
+ Declare \^{} and \~{} in tuenc.def.
Declare \textquotesingle, \textasciigrave and
\textquotedbl for TU encoding (\remove at tlig version)
Modified: trunk/Master/texmf-dist/doc/latex/base/docstrip.pdf
===================================================================
(Binary files differ)
Modified: trunk/Master/texmf-dist/doc/latex/base/inputenc.pdf
===================================================================
(Binary files differ)
Modified: trunk/Master/texmf-dist/doc/latex/base/latexchanges.pdf
===================================================================
(Binary files differ)
Modified: trunk/Master/texmf-dist/doc/latex/base/latexchanges.tex
===================================================================
--- trunk/Master/texmf-dist/doc/latex/base/latexchanges.tex 2018-04-29 23:31:02 UTC (rev 47499)
+++ trunk/Master/texmf-dist/doc/latex/base/latexchanges.tex 2018-04-29 23:33:08 UTC (rev 47500)
@@ -72,6 +72,13 @@
with the \Lpack{latexrelease} package being available to revert
changes to use definitions from an earlier format.
+\section{Changes introduced in 2018-04-01 patch~3}
+Additional adjustments for GitHub issues 34 and 38, adjustment to the
+location of some documentation files, such as \texttt{source2e.tex} to
+be installed in the documentation sources not the default \TeX\ input
+tree.
+
+
\section{Changes introduced in 2018-04-01 patch~2}
Additional adjustments for GitHub issues 32 and 33.
Added: trunk/Master/texmf-dist/doc/latex/base/lppl.tex
===================================================================
--- trunk/Master/texmf-dist/doc/latex/base/lppl.tex (rev 0)
+++ trunk/Master/texmf-dist/doc/latex/base/lppl.tex 2018-04-29 23:33:08 UTC (rev 47500)
@@ -0,0 +1,511 @@
+%
+% Copyright 1999 2002-2011 LaTeX3 Project
+% Everyone is allowed to distribute verbatim copies of this
+% license document, but modification of it is not allowed.
+%
+%
+% If you wish to load it as part of a ``doc'' source, you have to
+% ensure that a) % is a comment character and b) that short verb
+% characters are being turned off, i.e.,
+%
+% \DeleteShortVerb{\'} % or whatever was made a shorthand
+% \MakePercentComment
+% \input{lppl}
+% \MakePercentIgnore
+% \MakeShortVerb{\'} % turn it on again if necessary
+%
+%
+% By default the license is produced with \section* as the highest
+% heading level. If this is not appropriate for the document in which
+% it is included define the commands listed below before loading this
+% document, e.g., for inclusion as a separate chapter define:
+%
+% \providecommand{\LPPLsection}{\chapter*}
+% \providecommand{\LPPLsubsection}{\section*}
+% \providecommand{\LPPLsubsubsection}{\subsection*}
+% \providecommand{\LPPLparagraph}{\subsubsection*}
+%
+%
+% To allow cross-referencing the headings \label's have been attached
+% to them, all starting with ``LPPL:''. As by default headings without
+% numbers are produced, this will only allow page references.
+% However, you can use the titleref package to produce textual
+% references or you change the definitions of \LPPLsection, and
+% friends to generated numbered headings.
+%
+%
+% We want it to be possible that this file can be processed by
+% (pdf)LaTeX on its own, or that this file can be included in another
+% LaTeX document without any modification whatsoever.
+% Hence the little test below.
+%
+%
+\makeatletter
+\ifx\@preamblecmds\@notprerr
+ % In this case the preamble has already been processed so this file
+ % is loaded as part of another document; just enclose everything in
+ % a group
+ \let\LPPLicense\bgroup
+ \let\endLPPLicense\egroup
+\else
+ % In this case the preamble has not been processed yet so this file
+ % is processed by itself.
+ \documentclass{article}
+ \let\LPPLicense\document
+ \let\endLPPLicense\enddocument
+\fi
+\makeatother
+
+
+\begin{LPPLicense}
+ \providecommand{\LPPLsection}{\section*}
+ \providecommand{\LPPLsubsection}{\subsection*}
+ \providecommand{\LPPLsubsubsection}{\subsubsection*}
+ \providecommand{\LPPLparagraph}{\paragraph*}
+ \providecommand*{\LPPLfile}[1]{\texttt{#1}}
+ \providecommand*{\LPPLdocfile}[1]{`\LPPLfile{#1.tex}'}
+ \providecommand*{\LPPL}{\textsc{lppl}}
+
+ \LPPLsection{The \LaTeX\ Project Public License}
+ \label{LPPL:LPPL}
+
+ \emph{LPPL Version 1.3c 2008-05-04}
+
+ \textbf{Copyright 1999, 2002--2008 \LaTeX3 Project}
+ \begin{quotation}
+ Everyone is allowed to distribute verbatim copies of this
+ license document, but modification of it is not allowed.
+ \end{quotation}
+
+ \LPPLsubsection{Preamble}
+ \label{LPPL:Preamble}
+
+ The \LaTeX\ Project Public License (\LPPL) is the primary license
+ under which the \LaTeX\ kernel and the base \LaTeX\ packages are
+ distributed.
+
+ You may use this license for any work of which you hold the
+ copyright and which you wish to distribute. This license may be
+ particularly suitable if your work is \TeX-related (such as a
+ \LaTeX\ package), but it is written in such a way that you can use
+ it even if your work is unrelated to \TeX.
+
+ The section `WHETHER AND HOW TO DISTRIBUTE WORKS UNDER THIS
+ LICENSE', below, gives instructions, examples, and recommendations
+ for authors who are considering distributing their works under this
+ license.
+
+ This license gives conditions under which a work may be distributed
+ and modified, as well as conditions under which modified versions of
+ that work may be distributed.
+
+ We, the \LaTeX3 Project, believe that the conditions below give you
+ the freedom to make and distribute modified versions of your work
+ that conform with whatever technical specifications you wish while
+ maintaining the availability, integrity, and reliability of that
+ work. If you do not see how to achieve your goal while meeting
+ these conditions, then read the document \LPPLdocfile{cfgguide} and
+ \LPPLdocfile{modguide} in the base \LaTeX\ distribution for suggestions.
+
+
+ \LPPLsubsection{Definitions}
+ \label{LPPL:Definitions}
+
+ In this license document the following terms are used:
+
+ \begin{description}
+ \item[Work] Any work being distributed under this License.
+
+ \item[Derived Work] Any work that under any applicable law is
+ derived from the Work.
+
+ \item[Modification] Any procedure that produces a Derived Work under
+ any applicable law -- for example, the production of a file
+ containing an original file associated with the Work or a
+ significant portion of such a file, either verbatim or with
+ modifications and/or translated into another language.
+
+ \item[Modify] To apply any procedure that produces a Derived Work
+ under any applicable law.
+
+ \item[Distribution] Making copies of the Work available from one
+ person to another, in whole or in part. Distribution includes
+ (but is not limited to) making any electronic components of the
+ Work accessible by file transfer protocols such as \textsc{ftp} or
+ \textsc{http} or by shared file systems such as Sun's Network File
+ System (\textsc{nfs}).
+
+ \item[Compiled Work] A version of the Work that has been processed
+ into a form where it is directly usable on a computer system.
+ This processing may include using installation facilities provided
+ by the Work, transformations of the Work, copying of components of
+ the Work, or other activities. Note that modification of any
+ installation facilities provided by the Work constitutes
+ modification of the Work.
+
+ \item[Current Maintainer] A person or persons nominated as such
+ within the Work. If there is no such explicit nomination then it
+ is the `Copyright Holder' under any applicable law.
+
+ \item[Base Interpreter] A program or process that is normally needed
+ for running or interpreting a part or the whole of the Work.
+
+ A Base Interpreter may depend on external components but these are
+ not considered part of the Base Interpreter provided that each
+ external component clearly identifies itself whenever it is used
+ interactively. Unless explicitly specified when applying the
+ license to the Work, the only applicable Base Interpreter is a
+ `\LaTeX-Format' or in the case of files belonging to the
+ `\LaTeX-format' a program implementing the `\TeX{} language'.
+ \end{description}
+
+ \LPPLsubsection{Conditions on Distribution and Modification}
+ \label{LPPL:Conditions}
+
+ \begin{enumerate}
+ \item Activities other than distribution and/or modification of the
+ Work are not covered by this license; they are outside its scope.
+ In particular, the act of running the Work is not restricted and
+ no requirements are made concerning any offers of support for the
+ Work.
+
+ \item\label{LPPL:item:distribute} You may distribute a complete, unmodified
+ copy of the Work as you received it. Distribution of only part of
+ the Work is considered modification of the Work, and no right to
+ distribute such a Derived Work may be assumed under the terms of
+ this clause.
+
+ \item You may distribute a Compiled Work that has been generated
+ from a complete, unmodified copy of the Work as distributed under
+ Clause~\ref{LPPL:item:distribute} above, as long as that Compiled Work is
+ distributed in such a way that the recipients may install the
+ Compiled Work on their system exactly as it would have been
+ installed if they generated a Compiled Work directly from the
+ Work.
+
+ \item\label{LPPL:item:currmaint} If you are the Current Maintainer of the
+ Work, you may, without restriction, modify the Work, thus creating
+ a Derived Work. You may also distribute the Derived Work without
+ restriction, including Compiled Works generated from the Derived
+ Work. Derived Works distributed in this manner by the Current
+ Maintainer are considered to be updated versions of the Work.
+
+ \item If you are not the Current Maintainer of the Work, you may
+ modify your copy of the Work, thus creating a Derived Work based
+ on the Work, and compile this Derived Work, thus creating a
+ Compiled Work based on the Derived Work.
+
+ \item\label{LPPL:item:conditions} If you are not the Current Maintainer
+ of the
+ Work, you may distribute a Derived Work provided the following
+ conditions are met for every component of the Work unless that
+ component clearly states in the copyright notice that it is exempt
+ from that condition. Only the Current Maintainer is allowed to
+ add such statements of exemption to a component of the Work.
+ \begin{enumerate}
+ \item If a component of this Derived Work can be a direct
+ replacement for a component of the Work when that component is
+ used with the Base Interpreter, then, wherever this component of
+ the Work identifies itself to the user when used interactively
+ with that Base Interpreter, the replacement component of this
+ Derived Work clearly and unambiguously identifies itself as a
+ modified version of this component to the user when used
+ interactively with that Base Interpreter.
+
+ \item\label{LPPL:item:changelog} Every component of the Derived Work
+ contains prominent
+ notices detailing the nature of the changes to that component,
+ or a prominent reference to another file that is distributed as
+ part of the Derived Work and that contains a complete and
+ accurate log of the changes.
+
+ \item No information in the Derived Work implies that any persons,
+ including (but not limited to) the authors of the original
+ version of the Work, provide any support, including (but not
+ limited to) the reporting and handling of errors, to recipients
+ of the Derived Work unless those persons have stated explicitly
+ that they do provide such support for the Derived Work.
+
+ \item\label{LPPL:item:unmodifiedcopy} You distribute at least one of
+ the following with the Derived Work:
+ \begin{enumerate}
+ \item A complete, unmodified copy of the Work; if your
+ distribution of a modified component is made by offering
+ access to copy the modified component from a designated place,
+ then offering equivalent access to copy the Work from the same
+ or some similar place meets this condition, even though third
+ parties are not compelled to copy the Work along with the
+ modified component;
+
+ \item Information that is sufficient to obtain a complete,
+ unmodified copy of the Work.
+ \end{enumerate}
+ \end{enumerate}
+ \item If you are not the Current Maintainer of the Work, you may
+ distribute a Compiled Work generated from a Derived Work, as long
+ as the Derived Work is distributed to all recipients of the
+ Compiled Work, and as long as the conditions of
+ Clause~\ref{LPPL:item:conditions}, above, are met with regard to the
+ Derived Work.
+
+ \item The conditions above are not intended to prohibit, and hence
+ do not apply to, the modification, by any method, of any component
+ so that it becomes identical to an updated version of that
+ component of the Work as it is distributed by the Current
+ Maintainer under Clause~\ref{LPPL:item:currmaint}, above.
+
+ \item Distribution of the Work or any Derived Work in an alternative
+ format, where the Work or that Derived Work (in whole or in part)
+ is then produced by applying some process to that format, does not
+ relax or nullify any sections of this license as they pertain to
+ the results of applying that process.
+
+ \item
+ \begin{enumerate}
+ \item A Derived Work may be distributed under a different license
+ provided that license itself honors the conditions listed in
+ Clause~\ref{LPPL:item:conditions} above, in regard to the Work, though it
+ does not have to honor the rest of the conditions in this
+ license.
+
+ \item If a Derived Work is distributed under a different license,
+ that Derived Work must provide sufficient documentation as part
+ of itself to allow each recipient of that Derived Work to honor
+ the restrictions in Clause~\ref{LPPL:item:conditions} above, concerning
+ changes from the Work.
+ \end{enumerate}
+ \item This license places no restrictions on works that are
+ unrelated to the Work, nor does this license place any
+ restrictions on aggregating such works with the Work by any means.
+
+ \item Nothing in this license is intended to, or may be used to,
+ prevent complete compliance by all parties with all applicable
+ laws.
+ \end{enumerate}
+
+ \LPPLsubsection{No Warranty}
+ \label{LPPL:Warranty}
+
+ There is no warranty for the Work. Except when otherwise stated in
+ writing, the Copyright Holder provides the Work `as is', without
+ warranty of any kind, either expressed or implied, including, but
+ not limited to, the implied warranties of merchantability and
+ fitness for a particular purpose. The entire risk as to the quality
+ and performance of the Work is with you. Should the Work prove
+ defective, you assume the cost of all necessary servicing, repair,
+ or correction.
+
+ In no event unless required by applicable law or agreed to in
+ writing will The Copyright Holder, or any author named in the
+ components of the Work, or any other party who may distribute and/or
+ modify the Work as permitted above, be liable to you for damages,
+ including any general, special, incidental or consequential damages
+ arising out of any use of the Work or out of inability to use the
+ Work (including, but not limited to, loss of data, data being
+ rendered inaccurate, or losses sustained by anyone as a result of
+ any failure of the Work to operate with any other programs), even if
+ the Copyright Holder or said author or said other party has been
+ advised of the possibility of such damages.
+
+ \LPPLsubsection{Maintenance of The Work}
+ \label{LPPL:Maintenance}
+
+ The Work has the status `author-maintained' if the Copyright Holder
+ explicitly and prominently states near the primary copyright notice
+ in the Work that the Work can only be maintained by the Copyright
+ Holder or simply that it is `author-maintained'.
+
+ The Work has the status `maintained' if there is a Current
+ Maintainer who has indicated in the Work that they are willing to
+ receive error reports for the Work (for example, by supplying a
+ valid e-mail address). It is not required for the Current Maintainer
+ to acknowledge or act upon these error reports.
+
+ The Work changes from status `maintained' to `unmaintained' if there
+ is no Current Maintainer, or the person stated to be Current
+ Maintainer of the work cannot be reached through the indicated means
+ of communication for a period of six months, and there are no other
+ significant signs of active maintenance.
+
+ You can become the Current Maintainer of the Work by agreement with
+ any existing Current Maintainer to take over this role.
+
+ If the Work is unmaintained, you can become the Current Maintainer
+ of the Work through the following steps:
+ \begin{enumerate}
+ \item Make a reasonable attempt to trace the Current Maintainer (and
+ the Copyright Holder, if the two differ) through the means of an
+ Internet or similar search.
+ \item If this search is successful, then enquire whether the Work is
+ still maintained.
+ \begin{enumerate}
+ \item If it is being maintained, then ask the Current Maintainer
+ to update their communication data within one month.
+
+ \item\label{LPPL:item:intention} If the search is unsuccessful or
+ no action to resume active maintenance is taken by the Current
+ Maintainer, then announce within the pertinent community your
+ intention to take over maintenance. (If the Work is a \LaTeX{}
+ work, this could be done, for example, by posting to
+ \texttt{comp.text.tex}.)
+ \end{enumerate}
+ \item {}
+ \begin{enumerate}
+ \item If the Current Maintainer is reachable and agrees to pass
+ maintenance of the Work to you, then this takes effect
+ immediately upon announcement.
+
+ \item\label{LPPL:item:announce} If the Current Maintainer is not
+ reachable and the Copyright Holder agrees that maintenance of
+ the Work be passed to you, then this takes effect immediately
+ upon announcement.
+ \end{enumerate}
+ \item\label{LPPL:item:change} If you make an `intention
+ announcement' as described in~\ref{LPPL:item:intention} above and
+ after three months your intention is challenged neither by the
+ Current Maintainer nor by the Copyright Holder nor by other
+ people, then you may arrange for the Work to be changed so as to
+ name you as the (new) Current Maintainer.
+
+ \item If the previously unreachable Current Maintainer becomes
+ reachable once more within three months of a change completed
+ under the terms of~\ref{LPPL:item:announce}
+ or~\ref{LPPL:item:change}, then that Current Maintainer must
+ become or remain the Current Maintainer upon request provided they
+ then update their communication data within one month.
+ \end{enumerate}
+ A change in the Current Maintainer does not, of itself, alter the
+ fact that the Work is distributed under the \LPPL\ license.
+
+ If you become the Current Maintainer of the Work, you should
+ immediately provide, within the Work, a prominent and unambiguous
+ statement of your status as Current Maintainer. You should also
+ announce your new status to the same pertinent community as
+ in~\ref{LPPL:item:intention} above.
+
+ \LPPLsubsection{Whether and How to Distribute Works under This License}
+ \label{LPPL:Distribute}
+
+ This section contains important instructions, examples, and
+ recommendations for authors who are considering distributing their
+ works under this license. These authors are addressed as `you' in
+ this section.
+
+ \LPPLsubsubsection{Choosing This License or Another License}
+ \label{LPPL:Choosing}
+
+ If for any part of your work you want or need to use
+ \emph{distribution} conditions that differ significantly from those
+ in this license, then do not refer to this license anywhere in your
+ work but, instead, distribute your work under a different license.
+ You may use the text of this license as a model for your own
+ license, but your license should not refer to the \LPPL\ or
+ otherwise give the impression that your work is distributed under
+ the \LPPL.
+
+ The document \LPPLdocfile{modguide} in the base \LaTeX\ distribution
+ explains the motivation behind the conditions of this license. It
+ explains, for example, why distributing \LaTeX\ under the
+ \textsc{gnu} General Public License (\textsc{gpl}) was considered
+ inappropriate. Even if your work is unrelated to \LaTeX, the
+ discussion in \LPPLdocfile{modguide} may still be relevant, and authors
+ intending to distribute their works under any license are encouraged
+ to read it.
+
+ \LPPLsubsubsection{A Recommendation on Modification Without Distribution}
+ \label{LPPL:WithoutDistribution}
+
+ It is wise never to modify a component of the Work, even for your
+ own personal use, without also meeting the above conditions for
+ distributing the modified component. While you might intend that
+ such modifications will never be distributed, often this will happen
+ by accident -- you may forget that you have modified that component;
+ or it may not occur to you when allowing others to access the
+ modified version that you are thus distributing it and violating the
+ conditions of this license in ways that could have legal
+ implications and, worse, cause problems for the community. It is
+ therefore usually in your best interest to keep your copy of the
+ Work identical with the public one. Many works provide ways to
+ control the behavior of that work without altering any of its
+ licensed components.
+
+ \LPPLsubsubsection{How to Use This License}
+ \label{LPPL:HowTo}
+
+ To use this license, place in each of the components of your work
+ both an explicit copyright notice including your name and the year
+ the work was authored and/or last substantially modified. Include
+ also a statement that the distribution and/or modification of that
+ component is constrained by the conditions in this license.
+
+ Here is an example of such a notice and statement:
+\begin{verbatim}
+ %% pig.dtx
+ %% Copyright 2005 M. Y. Name
+ %
+ % This work may be distributed and/or modified under the
+ % conditions of the LaTeX Project Public License, either version 1.3
+ % of this license or (at your option) any later version.
+ % The latest version of this license is in
+ % https://www.latex-project.org/lppl.txt
+ % and version 1.3 or later is part of all distributions of LaTeX
+ % version 2005/12/01 or later.
+ %
+ % This work has the LPPL maintenance status `maintained'.
+ %
+ % The Current Maintainer of this work is M. Y. Name.
+ %
+ % This work consists of the files pig.dtx and pig.ins
+ % and the derived file pig.sty.
+\end{verbatim}
+
+ Given such a notice and statement in a file, the conditions given in
+ this license document would apply, with the `Work' referring to the
+ three files `\LPPLfile{pig.dtx}', `\LPPLfile{pig.ins}', and
+ `\LPPLfile{pig.sty}' (the last being generated from
+ `\LPPLfile{pig.dtx}' using `\LPPLfile{pig.ins}'), the `Base
+ Interpreter' referring to any `\LaTeX-Format', and both `Copyright
+ Holder' and `Current Maintainer' referring to the person `M. Y.
+ Name'.
+
+ If you do not want the Maintenance section of \LPPL\ to apply to
+ your Work, change `maintained' above into `author-maintained'.
+ However, we recommend that you use `maintained' as the Maintenance
+ section was added in order to ensure that your Work remains useful
+ to the community even when you can no longer maintain and support it
+ yourself.
+
+ \LPPLsubsubsection{Derived Works That Are Not Replacements}
+ \label{LPPL:NotReplacements}
+
+ Several clauses of the \LPPL\ specify means to provide reliability
+ and stability for the user community. They therefore concern
+ themselves with the case that a Derived Work is intended to be used
+ as a (compatible or incompatible) replacement of the original
+ Work. If this is not the case (e.g., if a few lines of code are
+ reused for a completely different task), then clauses
+ \ref{LPPL:item:changelog} and \ref{LPPL:item:unmodifiedcopy}
+ shall not apply.
+
+ \LPPLsubsubsection{Important Recommendations}
+ \label{LPPL:Recommendations}
+
+ \LPPLparagraph{Defining What Constitutes the Work}
+
+ The \LPPL\ requires that distributions of the Work contain all the
+ files of the Work. It is therefore important that you provide a way
+ for the licensee to determine which files constitute the Work. This
+ could, for example, be achieved by explicitly listing all the files
+ of the Work near the copyright notice of each file or by using a
+ line such as:
+\begin{verbatim}
+ % This work consists of all files listed in manifest.txt.
+\end{verbatim}
+ in that place. In the absence of an unequivocal list it might be
+ impossible for the licensee to determine what is considered by you
+ to comprise the Work and, in such a case, the licensee would be
+ entitled to make reasonable conjectures as to which files comprise
+ the Work.
+
+\end{LPPLicense}
+\endinput
Property changes on: trunk/Master/texmf-dist/doc/latex/base/lppl.tex
___________________________________________________________________
Added: svn:eol-style
## -0,0 +1 ##
+native
\ No newline at end of property
Modified: trunk/Master/texmf-dist/doc/latex/base/source2e.pdf
===================================================================
(Binary files differ)
Added: trunk/Master/texmf-dist/doc/latex/base/source2e.tex
===================================================================
--- trunk/Master/texmf-dist/doc/latex/base/source2e.tex (rev 0)
+++ trunk/Master/texmf-dist/doc/latex/base/source2e.tex 2018-04-29 23:33:08 UTC (rev 47500)
@@ -0,0 +1,503 @@
+% \iffalse meta-comment
+%
+% Copyright 1993-2016
+% The LaTeX3 Project and any individual authors listed elsewhere
+% in this file.
+%
+% This file is part of the LaTeX base system.
+% -------------------------------------------
+%
+% It may be distributed and/or modified under the
+% conditions of the LaTeX Project Public License, either version 1.3c
+% of this license or (at your option) any later version.
+% The latest version of this license is in
+% https://www.latex-project.org/lppl.txt
+% and version 1.3c or later is part of all distributions of LaTeX
+% version 2005/12/01 or later.
+%
+% This file has the LPPL maintenance status "maintained".
+%
+% The list of all files belonging to the LaTeX base distribution is
+% given in the file `manifest.txt'. See also `legal.txt' for additional
+% information.
+%
+% The list of derived (unpacked) files belonging to the distribution
+% and covered by LPPL is defined by the unpacking scripts (with
+% extension .ins) which are part of the distribution.
+%
+% \fi
+
+% This document will typeset the LaTeX sources as a single document.
+% This will produce quite a large file (roughly 555 pages) and may
+% take a long time.
+%
+% Some notes on processing this document are contained at the end
+% of this document, after \end{document}
+%
+% DPC 1997/11/17
+%
+% First a special index style for makeindex
+%
+
+\begin{filecontents}{source2e.ist}
+actual '='
+quote '!'
+level '>'
+preamble
+"\n \\begin{theindex} \n \\makeatletter\\scan at allowedfalse\n"
+postamble
+"\n\n \\end{theindex}\n"
+item_x1 "\\efill \n \\subitem "
+item_x2 "\\efill \n \\subsubitem "
+delim_0 "\\pfill "
+delim_1 "\\pfill "
+delim_2 "\\pfill "
+% The next lines will produce some warnings when
+% running Makeindex as they try to cover two different
+% versions of the program:
+lethead_prefix "{\\bfseries\\hfil "
+lethead_suffix "\\hfil}\\nopagebreak\n"
+lethead_flag 1
+heading_prefix "{\\bfseries\\hfil "
+heading_suffix "\\hfil}\\nopagebreak\n"
+headings_flag 1
+
+% and just for source2e:
+% Remove R so I is treated in sequence I J K not I II III
+page_precedence "rnaA"
+\end{filecontents}
+
+
+
+\documentclass{ltxdoc}
+
+\listfiles
+
+% Do not index some TeX primitives, and some common plain TeX commands.
+
+\DoNotIndex{\def,\long,\edef,\xdef,\gdef,\let,\global}
+\DoNotIndex{\if,\ifnum,\ifdim,\ifcat,\ifmmode,\ifvmode,\ifhmode,%
+ \iftrue,\iffalse,\ifvoid,\ifx,\ifeof,\ifcase,\else,\or,\fi}
+\DoNotIndex{\box,\copy,\setbox,\unvbox,\unhbox,\hbox,%
+ \vbox,\vtop,\vcenter}
+\DoNotIndex{\@empty,\immediate,\write}
+\DoNotIndex{\egroup,\bgroup,\expandafter,\begingroup,\endgroup}
+\DoNotIndex{\divide,\advance,\multiply,\count,\dimen}
+\DoNotIndex{\relax,\space,\string}
+\DoNotIndex{\csname,\endcsname,\@spaces,\openin,\openout,%
+ \closein,\closeout}
+\DoNotIndex{\catcode,\endinput}
+\DoNotIndex{\jobname,\message,\read,\the,\m at ne,\noexpand}
+\DoNotIndex{\hsize,\vsize,\hskip,\vskip,\kern,\hfil,\hfill,\hss}
+\DoNotIndex{\m at ne,\z@,\z at skip,\@ne,\tw@,\p@}
+\DoNotIndex{\dp,\wd,\ht,\vss,\unskip}
+
+% Set up the Index and Change History to use \part
+\IndexPrologue{\part*{Index}%
+ \markboth{Index}{Index}%
+ \addcontentsline{toc}{part}{Index}%
+ The italic numbers denote the pages where the
+ corresponding entry is described,
+ numbers underlined point to the definition,
+ all others indicate the places where it is used.}
+
+\GlossaryPrologue{\part*{Change History}%
+% Allow control names to be hyphenated here...
+ {\GlossaryParms\ttfamily\hyphenchar\font=`\-}%
+ \markboth{Change History}{Change History}%
+ \addcontentsline{toc}{part}{Change History}}
+
+% The standard \changes command modified slightly to better cope with
+% this multiple file document.
+\makeatletter
+\def\@changes at iso@date#1/#2/#3/#4\space{#1\if\relax#2\relax\else-#2-#3\fi\space}
+\def\changes@#1#2#3{%
+ \let\protect\@unexpandable at protect
+ \edef\@tempa{\noexpand\glossary{\@changes at iso@date#2///\space
+ \currentfile\space#1\levelchar
+ \ifx\saved at macroname\@empty
+ \space
+ \actualchar
+ \generalname
+ \else
+ \expandafter\@gobble
+ \saved at macroname
+ \actualchar
+ \string\verb\quotechar*%
+ \verbatimchar\saved at macroname
+ \verbatimchar
+ \fi
+ :\levelchar #3}}%
+ \@tempa\endgroup\@esphack}
+
+% Move whole block up so that the file key is not so close
+% to bottom of US letter page.
+\addtolength\topmargin{-2\baselineskip}
+
+
+% Codelines are allowed to run over a bit without showing up as overfull
+%
+\renewcommand*\MacroFont{\fontencoding\encodingdefault
+ \fontfamily\ttdefault
+ \fontseries\mddefault
+ \fontshape\updefault
+ \small
+ \hfuzz 6pt\relax}
+
+% Section numbers now reach eg 74.17.2 which need more space
+\renewcommand*\l at subsection{\@dottedtocline{2}{1.5em}{2.8em}}
+\renewcommand*\l at subsubsection{\@dottedtocline{3}{3.8em}{3.4em}}
+\makeatother
+
+% Produce a Change Log and (2 column) Index.
+\RecordChanges
+\CodelineIndex
+\EnableCrossrefs
+\setcounter{IndexColumns}{2}
+
+% Needed for documentation in ltoutenc.dtx
+\usepackage{textcomp}
+
+\begin{document}
+ \title{The \LaTeXe\ Sources}
+ \author{%
+ Johannes Braams\\
+ David Carlisle\\
+ Alan Jeffrey\\
+ Leslie Lamport\\
+ Frank Mittelbach\\
+ Chris Rowley\\
+ Rainer Sch\"opf}
+
+% This command will be used to input the patch file
+% if that file exists.
+\newcommand{\includeltpatch}{%
+ \def\currentfile{ltpatch.ltx}
+ \part{ltpatch}
+ {\let\ttfamily\relax
+ \xdef\filekey{\filekey, \thepart={\ttfamily\currentfile}}}%
+ Things we did wrong\ldots
+ \IndexInput{ltpatch.ltx}}
+
+
+
+% Get the date and patch level from ltvers.dtx
+\makeatletter
+\let\patchdate=\@empty
+\begingroup
+ \def\ProvidesFile#1\fmtversion#2#3\patch at level#4{%
+ \date{#2}\xdef\patchdate{#4}\endinput}
+ \input{ltvers.dtx}
+\global\let\X at date=\@date
+
+% Add the patch version if available.
+ \long\def\Xdef#1#2#3\def#4#5{%
+ \xdef\X at date{#2}%
+ \xdef\patchdate{#5}%
+ \endinput}%
+ \InputIfFileExists{ltpatch.ltx}
+ {\let\def\Xdef}{\global\let\includeltpatch\relax}
+\endgroup
+
+\ifx\@date\X at date
+ \def\Xpatch{0}
+ \ifx\patchdate\Xpatch\else
+ \edef\@date{\@date\space Patch level \patchdate}
+ \fi
+\else
+ \@warning{ltpatch.ltx does not match ltvers.dtx!}
+ \let\includeltpatch\relax
+\fi
+\makeatother
+
+ \pagenumbering{roman}
+
+ \MaintainedByLaTeXTeam{latex}
+ \maketitle
+ \renewcommand\maketitle{}
+
+ \tableofcontents
+
+ \clearpage
+
+ \pagenumbering{arabic}
+
+%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
+
+% Each of the following \DocInclude lines includes a file with extension
+% .dtx. Each of these files may be typeset separately. For instance
+% latex ltboxes.dtx
+% will typeset the source of the LaTeX box commands.
+%
+% If this file is processed, each of these separate dtx files will be
+% contained as a part of a single document. Using ltxdoc.cfg you can
+% then optionally produce a combined index and/or change history for
+% the entire source of the format file. Note that such a document will
+% be quite large (about 555 pages).
+%
+
+ \DocInclude{ltdirchk} % System dependent initialisation
+
+ \DocInclude{ltplain} % LaTeX version of Knuth's plain.tex
+
+ \DocInclude{ltvers} % Current version date
+
+ \DocInclude{ltdefns} % Initial definitions.
+
+ \DocInclude{ltalloc} % Allocation of counters and others.
+
+ \DocInclude{ltcntrl} % Program control macros.
+
+ \DocInclude{lterror} % Error handling.
+
+ \DocInclude{ltpar} % Paragraphs.
+
+ \DocInclude{ltspace} % Spacing, line and page breaking.
+
+ \DocInclude{ltlogos} % Logos.
+
+ \DocInclude{ltfiles} % \input files and related commands
+
+ \DocInclude{ltoutenc} % Output encoding interface
+
+ \DocInclude{ltcounts} % Counters
+
+ \DocInclude{ltlength} % Lengths
+
+ \DocInclude{ltfssbas} % NFSS Base macros
+
+ \DocInclude{ltfsstrc} % NFSS Tracing (and tracefnt.sty)
+
+ \DocInclude{ltfsscmp} % NFSS1 Compatibility
+
+ \DocInclude{ltfssdcl} % NFSS Declarative interface
+
+ \DocInclude{ltfssini} % NFSS Initialisation
+
+ \DocInclude{fontdef} % fonttext.ltx/fontmath.ltx
+
+ \DocInclude{preload} % preload.ltx
+
+ \DocInclude{ltfntcmd} % \textrm etc
+
+ \DocInclude{ltpageno} % Page numbering
+
+ \DocInclude{ltxref} % Cross referencing
+
+ \DocInclude{ltmiscen} % Miscellaneous environment definitions.
+
+ \DocInclude{ltmath} % Mathematics set up.
+
+ \DocInclude{ltlists} % List and related environments
+
+ \DocInclude{ltboxes} % Parbox and friends
+
+ \DocInclude{lttab} % Tabbing tabular and array
+
+ \DocInclude{ltpictur} % Picture mode
+
+ \DocInclude{ltthm} % Theorem environments
+
+ \DocInclude{ltsect} % Sectioning
+
+ \DocInclude{ltfloat} % Floats
+
+ \DocInclude{ltidxglo} % Index and Glossary
+
+ \DocInclude{ltbibl} % Bibliography
+
+ \DocInclude{ltpage} % \pagestyle \raggedbottom \sloppy
+
+ \DocInclude{ltoutput} % Output routine
+
+ \DocInclude{ltclass} % Package & Class interface
+
+ \DocInclude{lthyphen} % Hyphenation (hyphen.ltx).
+
+ \DocInclude{ltluatex} % Luatex support
+
+ \DocInclude{ltfinal} % Last minute initialisations and dump
+
+ \includeltpatch % Corrections distributed after the full release
+
+% Stop here if ltxdoc.cfg says \AtEndOfClass{\OnlyDescription}
+\StopEventually{\end{document}}
+
+\clearpage
+\pagestyle{headings}
+
+% Make TeX shut up.
+\hbadness=10000
+\newcount\hbadness
+\hfuzz=\maxdimen
+
+\typeout{%
+ \string # Produce change log with^^J%
+ makeindex -s gglo.ist -o source2e.gls source2e.glo}
+
+
+\PrintChanges
+
+\clearpage
+
+% makeindex needs a symbol between the parts of composite page numbers
+% but we dont want one, so:
+\typeout{%
+ \string # Produce index with^^J%
+ makeindex -s source2e.ist source2e.idx}
+
+\begingroup
+\def\endash{--}
+\catcode`\-\active
+\def-{\futurelet\temp\indexdash}
+\def\indexdash{\ifx\temp-\endash\fi}
+
+\PrintIndex
+\endgroup
+
+% Make sure that the index is not printed twice
+% (ltxdoc.cfg might have a second \PrintIndex command)
+\let\PrintChanges\relax
+\let\PrintIndex\relax
+
+\end{document}
+
+
+%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
+
+To use this file to produce a fully indexed source code
+you need to execute the following (or equivalent) commands:
+
+ latex source2e.tex
+
+ makeindex -s source2e.ist source2e.idx
+ makeindex -s gglo.ist -o source2e.gls source2e.glo
+
+ latex source2e.tex
+ latex source2e.tex
+
+
+The makeindex style source2e.ist is used in place of the usual
+doc gind.ist to ensure that I is used in the sequence I J K
+not I II II, which would be the default makeindex behaviour.
+
+The third run with latex is only required to get the table of
+contents entries for the change log and index. You may speed things up
+by using the \includeonly mechanism so as not to typeset the source
+files on the second run. This involves changing the file
+ltxdoc.cfg
+between the latex runs.
+
+The following unix script automates this.
+ (It could easily be ported to scripts for DOS or VMS,
+ rm is ReMove a file, and echo "..." > file writes ... to "file".)
+
+
+After this script (after the second ==============) is a similar script
+that will produce the documentation for all the files in the base
+distribution that are *not* included in source2e.dvi. This second script
+was requested, but before using it, beware it will take a long time!
+It may however be modified as required, eg to not typeset the fdd files
+or whatever...
+
+==============
+#!/bin/sh
+
+rm -f source2e.gls source2e.ind source2e.toc
+
+# First run:
+# Create new standard ltxdoc.cfg file
+# Pass the (possibly empty) list of arguments supplied on the
+# command line to article class.
+#
+# If you use A4 paper, running this script with argument
+# a4paper
+# may save about 30 pages.
+#
+echo "\PassOptionsToClass{$*}{article}" > ltxdoc.cfg
+
+
+# Now LaTeX the file with this cfg file.
+#
+pdflatex source2e.tex
+
+
+# Make the Change log and Glossary.
+#
+makeindex -s source2e.ist source2e.idx
+makeindex -s gglo.ist -o source2e.gls source2e.glo
+
+
+# Second run: append \includeonly{} to ltxdoc.cfg to speed up things
+# (this run needed only to get changes and index listed in .toc file)
+#
+# Note that the index will not be made incorrect by the insertion
+# of the table of contents as the front matter uses a different page
+# numbering scheme.
+#
+echo "\includeonly{}" >> ltxdoc.cfg
+
+pdflatex source2e.tex
+
+
+# Third and final run, to put everything together.
+# First restore the cfg file:
+#
+echo "\PassOptionsToClass{$*}{article}" > ltxdoc.cfg
+pdflatex source2e.tex
+
+
+==============
+#!/bin/sh
+
+# Running this script will process all the dtx fdd and *guide.tex
+# and ltnews*.tex files in the LaTeX distribution, except the dtx
+# files included in source2e.tex.
+# (The shell first script in the comments of source2e.tex will
+# process those.)
+
+# Any command line arguments (eg a4paper) are taken as options to the
+# article class.
+
+# This script is likely to take ages!
+
+echo "\PassOptionsToClass{$*}{article}" > ltxdoc.cfg
+echo "\batchmode" >> ltxdoc.cfg
+
+# The next four lines produce full indexes and change logs
+# you may not want those.
+echo "\AtBeginDocument{\RecordChanges}" >> ltxdoc.cfg
+echo "\AtEndDocument{\PrintChanges}" >> ltxdoc.cfg
+echo "\AtBeginDocument{\CodelineIndex\EnableCrossrefs}" >> ltxdoc.cfg
+echo "\AtEndDocument{\PrintIndex}" >> ltxdoc.cfg
+
+# If you do not want any code listings, just documentation, then instead
+# of the above four lines, uncomment the following:
+# echo "\AtBeginDocument{\OnlyDescription}" >> ltxdoc.cfg
+
+
+for i in *dtx *fdd
+do
+B=`basename $i .dtx`
+
+if (grep "Include{$B}" source2e.tex >/dev/null ; )
+then
+echo In source2e: $i
+else
+echo pdflatex $i
+ if (pdflatex $i > /dev/null)
+ then
+ echo pdflatex $i
+ pdflatex $i > /dev/null
+ echo makeindex -s gind.ist $B.idx
+ makeindex -s gind.ist $B.idx > /dev/null 2> /dev/null
+ echo makeindex -s gglo.ist -o $B.gls $B.glo
+ makeindex -s gglo.ist -o $B.gls $B.glo > /dev/null 2> /dev/null
+ echo pdflatex $i
+ pdflatex $i > /dev/null
+ else
+ echo "!!! LaTeX ERROR: $i. (See $B.log.)"
+ fi
+fi
+
+done
Property changes on: trunk/Master/texmf-dist/doc/latex/base/source2e.tex
___________________________________________________________________
Added: svn:eol-style
## -0,0 +1 ##
+native
\ No newline at end of property
Modified: trunk/Master/texmf-dist/doc/latex/tools/changes.txt
===================================================================
--- trunk/Master/texmf-dist/doc/latex/tools/changes.txt 2018-04-29 23:31:02 UTC (rev 47499)
+++ trunk/Master/texmf-dist/doc/latex/tools/changes.txt 2018-04-29 23:33:08 UTC (rev 47500)
@@ -5,6 +5,12 @@
are not part of the distribution.
=======================================================================
+2018-04-20 Frank Mittelbach <Frank.Mittelbach at latex-project.org>
+
+ * multicol.dtx: restoring column status when leaving a boxed
+ multicols so that any further \docolaction will know the
+ currect column (issue/39)
+
2018-04-07 Frank Mittelbach <Frank.Mittelbach at latex-project.org>
* array.dtx: Renamed internal \mcell at box to
Modified: trunk/Master/texmf-dist/doc/latex/tools/multicol.pdf
===================================================================
(Binary files differ)
Modified: trunk/Master/texmf-dist/source/latex/base/docstrip.dtx
===================================================================
--- trunk/Master/texmf-dist/source/latex/base/docstrip.dtx 2018-04-29 23:31:02 UTC (rev 47499)
+++ trunk/Master/texmf-dist/source/latex/base/docstrip.dtx 2018-04-29 23:33:08 UTC (rev 47500)
@@ -1,6 +1,6 @@
% \iffalse meta-comment
%
-% Copyright 1993-2017
+% Copyright 1993-2018
% The LaTeX3 Project and any individual authors listed elsewhere
% in this file.
%
@@ -29,9 +29,9 @@
\catcode`\{=1
\catcode`\}=2
\def\filename{docstrip.dtx}
-\def\fileversion{2.5e}
-\def\filedate{2014/09/29}
-\def\docdate {2017/03/13}
+\def\fileversion{2.5f}
+\def\filedate{2018/04/10}
+\def\docdate {2018/04/10}
%%
%
%\iffalse
@@ -3034,6 +3034,18 @@
\makeOther\~\makeOther\{\makeOther\}\makeOther\&%
\endlinechar-1\relax
% \end{macrocode}
+% To avoid any UTF-8 handling of characters we set code points
+% 128--255 to other.
+% \changes{2.5f}{2018/04/10}{Read 8bit raw to leave high bits in the
+% code to unchanged without utf8 handling (issue 34)}
+% \begin{macrocode}
+ \@tempcnta=128\relax
+ \loop
+ \catcode\@tempcnta 12\relax
+ \ifnum\@tempcnta <255\relax
+ \advance\@tempcnta\@ne
+ \repeat
+% \end{macrocode}
% Then we start a loop to process the lines in the file one by one.
% \begin{macrocode}
\loop
Modified: trunk/Master/texmf-dist/source/latex/base/inputenc.dtx
===================================================================
--- trunk/Master/texmf-dist/source/latex/base/inputenc.dtx 2018-04-29 23:31:02 UTC (rev 47499)
+++ trunk/Master/texmf-dist/source/latex/base/inputenc.dtx 2018-04-29 23:33:08 UTC (rev 47500)
@@ -647,7 +647,7 @@
\else
% \end{macrocode}
% Unicode based TeX engines do not require this package at all, and always use UTF-8
-% input. Allow the package to be used if |[uf8]| or |[ascii]| options are used to simplify
+% input. Allow the package to be used if |[utf8]| or |[ascii]| options are used to simplify
% switching between TeX engines.
% \begin{macrocode}
\def\inputencoding#1{%
Modified: trunk/Master/texmf-dist/source/latex/base/ltclass.dtx
===================================================================
--- trunk/Master/texmf-dist/source/latex/base/ltclass.dtx 2018-04-29 23:31:02 UTC (rev 47499)
+++ trunk/Master/texmf-dist/source/latex/base/ltclass.dtx 2018-04-29 23:33:08 UTC (rev 47500)
@@ -33,7 +33,7 @@
%<*driver>
% \fi
\ProvidesFile{ltclass.dtx}
- [2018/04/08 v1.2h LaTeX Kernel (Class & Package Interface)]
+ [2018/04/10 v1.2h LaTeX Kernel (Class & Package Interface)]
% \iffalse
\documentclass{ltxdoc}
\GetFileInfo{ltclass.dtx}
@@ -1951,7 +1951,6 @@
%
% \begin{macro}{\load at onefilewithoptions}
% \begin{macro}{\@onefilewithoptions}
-% \changes{v1.2h}{2018-04-08}{Pass expanded date}
% the best place to add the rollback code is at the point where
% |\@onefilewithoptions| is called to load a single class or
% package.
@@ -2000,7 +1999,10 @@
% \end{macrocode}
% If we had a rollback request then |#3| may contain data but not
% necessarily a ``minimal date'' so instead of passing it on we
-% pass on |\pkgcls at mindate|.
+% pass on the content of |\pkgcls at mindate|. We need to pass the
+% value not the command, otherwise nested packages may pick up the
+% wrong information.
+% \changes{v1.2h}{2018-04-08}{Pass expanded date}
% \begin{macrocode}
\begingroup
\edef\reserved at a{%
Modified: trunk/Master/texmf-dist/source/latex/base/ltcounts.dtx
===================================================================
--- trunk/Master/texmf-dist/source/latex/base/ltcounts.dtx 2018-04-29 23:31:02 UTC (rev 47499)
+++ trunk/Master/texmf-dist/source/latex/base/ltcounts.dtx 2018-04-29 23:33:08 UTC (rev 47500)
@@ -33,7 +33,7 @@
%<*driver>
% \fi
\ProvidesFile{ltcounts.dtx}
- [2018/03/08 v1.1k LaTeX Kernel (Counters)]
+ [2018/04/22 v1.1l LaTeX Kernel (Counters)]
% \iffalse
\documentclass{ltxdoc}
\GetFileInfo{ltcounts.dtx}
@@ -410,6 +410,7 @@
\@ifbothcounters{#1}{#2}{\@addtoreset{#1}{#2}}}
% \end{macrocode}
%
+% \changes{v1.1l}{2018/04/11}{Correct default (issue/38)}
% \begin{macrocode}
\def\counterwithin at x#1#2{%
\@ifbothcounters{#1}{#2}%
@@ -417,6 +418,7 @@
\expandafter
\gdef\csname the#1\expandafter\endcsname\expandafter
{\csname the#2\expandafter\endcsname\expandafter
+ .\expandafter
\@arabic\csname c@#1\endcsname}}}
% \end{macrocode}
% \end{macro}
Modified: trunk/Master/texmf-dist/source/latex/base/ltvers.dtx
===================================================================
--- trunk/Master/texmf-dist/source/latex/base/ltvers.dtx 2018-04-29 23:31:02 UTC (rev 47499)
+++ trunk/Master/texmf-dist/source/latex/base/ltvers.dtx 2018-04-29 23:33:08 UTC (rev 47500)
@@ -115,7 +115,7 @@
{2018-04-01}
%</2ekernel|latexrelease>
%<*2ekernel>
-\def\patch at level{2}
+\def\patch at level{3}
% \end{macrocode}
% \end{macro}
% \end{macro}
Modified: trunk/Master/texmf-dist/source/latex/tools/multicol.dtx
===================================================================
--- trunk/Master/texmf-dist/source/latex/tools/multicol.dtx 2018-04-29 23:31:02 UTC (rev 47499)
+++ trunk/Master/texmf-dist/source/latex/tools/multicol.dtx 2018-04-29 23:33:08 UTC (rev 47500)
@@ -98,7 +98,7 @@
%<driver> \ProvidesFile{multicol.drv}
% \fi
% \ProvidesFile{multicol.dtx}
- [2018/04/01 v1.8r multicolumn formatting (FMi)]
+ [2018/04/20 v1.8s multicolumn formatting (FMi)]
%
%
%%
@@ -1845,9 +1845,15 @@
\global\c at unbalance\z@
% \end{macrocode}
% Now it's time to return any footnotes if we are in unrestricted
-% mode:
+% mode. In boxed mode footnotes are kept inside, but in that case
+% we have to write another column status into the \texttt{.aux}
+% file to support \cs{docolaction} in case we have nested
+% environments.
+% \changes{v1.8s}{2018/04/20}{Support for \cs{docolaction} (issue/39)}
% \begin{macrocode}
- \if at boxedmulticols\else
+ \if at boxedmulticols
+ \mc at col@status at write
+ \else
\reinsert at footnotes
% \end{macrocode}
% We also take a look at the amount of free space on the current
Modified: trunk/Master/texmf-dist/tex/latex/base/docstrip.tex
===================================================================
--- trunk/Master/texmf-dist/tex/latex/base/docstrip.tex 2018-04-29 23:31:02 UTC (rev 47499)
+++ trunk/Master/texmf-dist/tex/latex/base/docstrip.tex 2018-04-29 23:33:08 UTC (rev 47500)
@@ -44,9 +44,9 @@
\catcode`\{=1
\catcode`\}=2
\def\filename{docstrip.dtx}
-\def\fileversion{2.5e}
-\def\filedate{2014/09/29}
-\def\docdate {2017/03/13}
+\def\fileversion{2.5f}
+\def\filedate{2018/04/10}
+\def\docdate {2018/04/10}
%%
%% The docstrip program for use with TeX.
%% Copyright (C) 1989-1991 Frank Mittelbach
@@ -622,7 +622,13 @@
\makeOther\_\makeOther\^^A\makeOther\%%
\makeOther\~\makeOther\{\makeOther\}\makeOther\&%
\endlinechar-1\relax
+ \@tempcnta=128\relax
\loop
+ \catcode\@tempcnta 12\relax
+ \ifnum\@tempcnta <255\relax
+ \advance\@tempcnta\@ne
+ \repeat
+ \loop
\read\inFile to\inLine
\ifx\inLine\Endinput
\Msg{File #1 ended by \string\endinput.}%
Modified: trunk/Master/texmf-dist/tex/latex/base/latex.ltx
===================================================================
--- trunk/Master/texmf-dist/tex/latex/base/latex.ltx 2018-04-29 23:31:02 UTC (rev 47499)
+++ trunk/Master/texmf-dist/tex/latex/base/latex.ltx 2018-04-29 23:33:08 UTC (rev 47500)
@@ -701,7 +701,7 @@
\def\fmtname{LaTeX2e}
\edef\fmtversion
{2018-04-01}
-\def\patch at level{2}
+\def\patch at level{3}
\iffalse
\def\reserved at a#1/#2/#3\@nil{%
\count@\year
@@ -2218,6 +2218,7 @@
\expandafter
\gdef\csname the#1\expandafter\endcsname\expandafter
{\csname the#2\expandafter\endcsname\expandafter
+ .\expandafter
\@arabic\csname c@#1\endcsname}}}
\def\arabic#1{\expandafter\@arabic\csname c@#1\endcsname}
Modified: trunk/Master/texmf-dist/tex/latex/base/latexrelease.sty
===================================================================
--- trunk/Master/texmf-dist/tex/latex/base/latexrelease.sty 2018-04-29 23:31:02 UTC (rev 47499)
+++ trunk/Master/texmf-dist/tex/latex/base/latexrelease.sty 2018-04-29 23:33:08 UTC (rev 47500)
@@ -1038,6 +1038,7 @@
\expandafter
\gdef\csname the#1\expandafter\endcsname\expandafter
{\csname the#2\expandafter\endcsname\expandafter
+ .\expandafter
\@arabic\csname c@#1\endcsname}}}
\EndIncludeInRelease
Deleted: trunk/Master/texmf-dist/tex/latex/base/lppl.tex
===================================================================
--- trunk/Master/texmf-dist/tex/latex/base/lppl.tex 2018-04-29 23:31:02 UTC (rev 47499)
+++ trunk/Master/texmf-dist/tex/latex/base/lppl.tex 2018-04-29 23:33:08 UTC (rev 47500)
@@ -1,511 +0,0 @@
-%
-% Copyright 1999 2002-2011 LaTeX3 Project
-% Everyone is allowed to distribute verbatim copies of this
-% license document, but modification of it is not allowed.
-%
-%
-% If you wish to load it as part of a ``doc'' source, you have to
-% ensure that a) % is a comment character and b) that short verb
-% characters are being turned off, i.e.,
-%
-% \DeleteShortVerb{\'} % or whatever was made a shorthand
-% \MakePercentComment
-% \input{lppl}
-% \MakePercentIgnore
-% \MakeShortVerb{\'} % turn it on again if necessary
-%
-%
-% By default the license is produced with \section* as the highest
-% heading level. If this is not appropriate for the document in which
-% it is included define the commands listed below before loading this
-% document, e.g., for inclusion as a separate chapter define:
-%
-% \providecommand{\LPPLsection}{\chapter*}
-% \providecommand{\LPPLsubsection}{\section*}
-% \providecommand{\LPPLsubsubsection}{\subsection*}
-% \providecommand{\LPPLparagraph}{\subsubsection*}
-%
-%
-% To allow cross-referencing the headings \label's have been attached
-% to them, all starting with ``LPPL:''. As by default headings without
-% numbers are produced, this will only allow page references.
-% However, you can use the titleref package to produce textual
-% references or you change the definitions of \LPPLsection, and
-% friends to generated numbered headings.
-%
-%
-% We want it to be possible that this file can be processed by
-% (pdf)LaTeX on its own, or that this file can be included in another
-% LaTeX document without any modification whatsoever.
-% Hence the little test below.
-%
-%
-\makeatletter
-\ifx\@preamblecmds\@notprerr
- % In this case the preamble has already been processed so this file
- % is loaded as part of another document; just enclose everything in
- % a group
- \let\LPPLicense\bgroup
- \let\endLPPLicense\egroup
-\else
- % In this case the preamble has not been processed yet so this file
- % is processed by itself.
- \documentclass{article}
- \let\LPPLicense\document
- \let\endLPPLicense\enddocument
-\fi
-\makeatother
-
-
-\begin{LPPLicense}
- \providecommand{\LPPLsection}{\section*}
- \providecommand{\LPPLsubsection}{\subsection*}
- \providecommand{\LPPLsubsubsection}{\subsubsection*}
- \providecommand{\LPPLparagraph}{\paragraph*}
- \providecommand*{\LPPLfile}[1]{\texttt{#1}}
- \providecommand*{\LPPLdocfile}[1]{`\LPPLfile{#1.tex}'}
- \providecommand*{\LPPL}{\textsc{lppl}}
-
- \LPPLsection{The \LaTeX\ Project Public License}
- \label{LPPL:LPPL}
-
- \emph{LPPL Version 1.3c 2008-05-04}
-
- \textbf{Copyright 1999, 2002--2008 \LaTeX3 Project}
- \begin{quotation}
- Everyone is allowed to distribute verbatim copies of this
- license document, but modification of it is not allowed.
- \end{quotation}
-
- \LPPLsubsection{Preamble}
- \label{LPPL:Preamble}
-
- The \LaTeX\ Project Public License (\LPPL) is the primary license
- under which the \LaTeX\ kernel and the base \LaTeX\ packages are
- distributed.
-
- You may use this license for any work of which you hold the
- copyright and which you wish to distribute. This license may be
- particularly suitable if your work is \TeX-related (such as a
- \LaTeX\ package), but it is written in such a way that you can use
- it even if your work is unrelated to \TeX.
-
- The section `WHETHER AND HOW TO DISTRIBUTE WORKS UNDER THIS
- LICENSE', below, gives instructions, examples, and recommendations
- for authors who are considering distributing their works under this
- license.
-
- This license gives conditions under which a work may be distributed
- and modified, as well as conditions under which modified versions of
- that work may be distributed.
-
- We, the \LaTeX3 Project, believe that the conditions below give you
- the freedom to make and distribute modified versions of your work
- that conform with whatever technical specifications you wish while
- maintaining the availability, integrity, and reliability of that
- work. If you do not see how to achieve your goal while meeting
- these conditions, then read the document \LPPLdocfile{cfgguide} and
- \LPPLdocfile{modguide} in the base \LaTeX\ distribution for suggestions.
-
-
- \LPPLsubsection{Definitions}
- \label{LPPL:Definitions}
-
- In this license document the following terms are used:
-
- \begin{description}
- \item[Work] Any work being distributed under this License.
-
- \item[Derived Work] Any work that under any applicable law is
- derived from the Work.
-
- \item[Modification] Any procedure that produces a Derived Work under
- any applicable law -- for example, the production of a file
- containing an original file associated with the Work or a
- significant portion of such a file, either verbatim or with
- modifications and/or translated into another language.
-
- \item[Modify] To apply any procedure that produces a Derived Work
- under any applicable law.
-
- \item[Distribution] Making copies of the Work available from one
- person to another, in whole or in part. Distribution includes
- (but is not limited to) making any electronic components of the
- Work accessible by file transfer protocols such as \textsc{ftp} or
- \textsc{http} or by shared file systems such as Sun's Network File
- System (\textsc{nfs}).
-
- \item[Compiled Work] A version of the Work that has been processed
- into a form where it is directly usable on a computer system.
- This processing may include using installation facilities provided
- by the Work, transformations of the Work, copying of components of
- the Work, or other activities. Note that modification of any
- installation facilities provided by the Work constitutes
- modification of the Work.
-
- \item[Current Maintainer] A person or persons nominated as such
- within the Work. If there is no such explicit nomination then it
- is the `Copyright Holder' under any applicable law.
-
- \item[Base Interpreter] A program or process that is normally needed
- for running or interpreting a part or the whole of the Work.
-
- A Base Interpreter may depend on external components but these are
- not considered part of the Base Interpreter provided that each
- external component clearly identifies itself whenever it is used
- interactively. Unless explicitly specified when applying the
- license to the Work, the only applicable Base Interpreter is a
- `\LaTeX-Format' or in the case of files belonging to the
- `\LaTeX-format' a program implementing the `\TeX{} language'.
- \end{description}
-
- \LPPLsubsection{Conditions on Distribution and Modification}
- \label{LPPL:Conditions}
-
- \begin{enumerate}
- \item Activities other than distribution and/or modification of the
- Work are not covered by this license; they are outside its scope.
- In particular, the act of running the Work is not restricted and
- no requirements are made concerning any offers of support for the
- Work.
-
- \item\label{LPPL:item:distribute} You may distribute a complete, unmodified
- copy of the Work as you received it. Distribution of only part of
- the Work is considered modification of the Work, and no right to
- distribute such a Derived Work may be assumed under the terms of
- this clause.
-
- \item You may distribute a Compiled Work that has been generated
- from a complete, unmodified copy of the Work as distributed under
- Clause~\ref{LPPL:item:distribute} above, as long as that Compiled Work is
- distributed in such a way that the recipients may install the
- Compiled Work on their system exactly as it would have been
- installed if they generated a Compiled Work directly from the
- Work.
-
- \item\label{LPPL:item:currmaint} If you are the Current Maintainer of the
- Work, you may, without restriction, modify the Work, thus creating
- a Derived Work. You may also distribute the Derived Work without
- restriction, including Compiled Works generated from the Derived
- Work. Derived Works distributed in this manner by the Current
- Maintainer are considered to be updated versions of the Work.
-
- \item If you are not the Current Maintainer of the Work, you may
- modify your copy of the Work, thus creating a Derived Work based
- on the Work, and compile this Derived Work, thus creating a
- Compiled Work based on the Derived Work.
-
- \item\label{LPPL:item:conditions} If you are not the Current Maintainer
- of the
- Work, you may distribute a Derived Work provided the following
- conditions are met for every component of the Work unless that
- component clearly states in the copyright notice that it is exempt
- from that condition. Only the Current Maintainer is allowed to
- add such statements of exemption to a component of the Work.
- \begin{enumerate}
- \item If a component of this Derived Work can be a direct
- replacement for a component of the Work when that component is
- used with the Base Interpreter, then, wherever this component of
- the Work identifies itself to the user when used interactively
- with that Base Interpreter, the replacement component of this
- Derived Work clearly and unambiguously identifies itself as a
- modified version of this component to the user when used
- interactively with that Base Interpreter.
-
- \item\label{LPPL:item:changelog} Every component of the Derived Work
- contains prominent
- notices detailing the nature of the changes to that component,
- or a prominent reference to another file that is distributed as
- part of the Derived Work and that contains a complete and
- accurate log of the changes.
-
- \item No information in the Derived Work implies that any persons,
- including (but not limited to) the authors of the original
- version of the Work, provide any support, including (but not
- limited to) the reporting and handling of errors, to recipients
- of the Derived Work unless those persons have stated explicitly
- that they do provide such support for the Derived Work.
-
- \item\label{LPPL:item:unmodifiedcopy} You distribute at least one of
- the following with the Derived Work:
- \begin{enumerate}
- \item A complete, unmodified copy of the Work; if your
- distribution of a modified component is made by offering
- access to copy the modified component from a designated place,
- then offering equivalent access to copy the Work from the same
- or some similar place meets this condition, even though third
- parties are not compelled to copy the Work along with the
- modified component;
-
- \item Information that is sufficient to obtain a complete,
- unmodified copy of the Work.
- \end{enumerate}
- \end{enumerate}
- \item If you are not the Current Maintainer of the Work, you may
- distribute a Compiled Work generated from a Derived Work, as long
- as the Derived Work is distributed to all recipients of the
- Compiled Work, and as long as the conditions of
- Clause~\ref{LPPL:item:conditions}, above, are met with regard to the
- Derived Work.
-
- \item The conditions above are not intended to prohibit, and hence
- do not apply to, the modification, by any method, of any component
- so that it becomes identical to an updated version of that
- component of the Work as it is distributed by the Current
- Maintainer under Clause~\ref{LPPL:item:currmaint}, above.
-
- \item Distribution of the Work or any Derived Work in an alternative
- format, where the Work or that Derived Work (in whole or in part)
- is then produced by applying some process to that format, does not
- relax or nullify any sections of this license as they pertain to
- the results of applying that process.
-
- \item
- \begin{enumerate}
- \item A Derived Work may be distributed under a different license
- provided that license itself honors the conditions listed in
- Clause~\ref{LPPL:item:conditions} above, in regard to the Work, though it
- does not have to honor the rest of the conditions in this
- license.
-
- \item If a Derived Work is distributed under a different license,
- that Derived Work must provide sufficient documentation as part
- of itself to allow each recipient of that Derived Work to honor
- the restrictions in Clause~\ref{LPPL:item:conditions} above, concerning
- changes from the Work.
- \end{enumerate}
- \item This license places no restrictions on works that are
- unrelated to the Work, nor does this license place any
- restrictions on aggregating such works with the Work by any means.
-
- \item Nothing in this license is intended to, or may be used to,
- prevent complete compliance by all parties with all applicable
- laws.
- \end{enumerate}
-
- \LPPLsubsection{No Warranty}
- \label{LPPL:Warranty}
-
- There is no warranty for the Work. Except when otherwise stated in
- writing, the Copyright Holder provides the Work `as is', without
- warranty of any kind, either expressed or implied, including, but
- not limited to, the implied warranties of merchantability and
- fitness for a particular purpose. The entire risk as to the quality
- and performance of the Work is with you. Should the Work prove
- defective, you assume the cost of all necessary servicing, repair,
- or correction.
-
- In no event unless required by applicable law or agreed to in
- writing will The Copyright Holder, or any author named in the
- components of the Work, or any other party who may distribute and/or
- modify the Work as permitted above, be liable to you for damages,
- including any general, special, incidental or consequential damages
- arising out of any use of the Work or out of inability to use the
- Work (including, but not limited to, loss of data, data being
- rendered inaccurate, or losses sustained by anyone as a result of
- any failure of the Work to operate with any other programs), even if
- the Copyright Holder or said author or said other party has been
- advised of the possibility of such damages.
-
- \LPPLsubsection{Maintenance of The Work}
- \label{LPPL:Maintenance}
-
- The Work has the status `author-maintained' if the Copyright Holder
- explicitly and prominently states near the primary copyright notice
- in the Work that the Work can only be maintained by the Copyright
- Holder or simply that it is `author-maintained'.
-
- The Work has the status `maintained' if there is a Current
- Maintainer who has indicated in the Work that they are willing to
- receive error reports for the Work (for example, by supplying a
- valid e-mail address). It is not required for the Current Maintainer
- to acknowledge or act upon these error reports.
-
- The Work changes from status `maintained' to `unmaintained' if there
- is no Current Maintainer, or the person stated to be Current
- Maintainer of the work cannot be reached through the indicated means
- of communication for a period of six months, and there are no other
- significant signs of active maintenance.
-
- You can become the Current Maintainer of the Work by agreement with
- any existing Current Maintainer to take over this role.
-
- If the Work is unmaintained, you can become the Current Maintainer
- of the Work through the following steps:
- \begin{enumerate}
- \item Make a reasonable attempt to trace the Current Maintainer (and
- the Copyright Holder, if the two differ) through the means of an
- Internet or similar search.
- \item If this search is successful, then enquire whether the Work is
- still maintained.
- \begin{enumerate}
- \item If it is being maintained, then ask the Current Maintainer
- to update their communication data within one month.
-
- \item\label{LPPL:item:intention} If the search is unsuccessful or
- no action to resume active maintenance is taken by the Current
- Maintainer, then announce within the pertinent community your
- intention to take over maintenance. (If the Work is a \LaTeX{}
- work, this could be done, for example, by posting to
- \texttt{comp.text.tex}.)
- \end{enumerate}
- \item {}
- \begin{enumerate}
- \item If the Current Maintainer is reachable and agrees to pass
- maintenance of the Work to you, then this takes effect
- immediately upon announcement.
-
- \item\label{LPPL:item:announce} If the Current Maintainer is not
- reachable and the Copyright Holder agrees that maintenance of
- the Work be passed to you, then this takes effect immediately
- upon announcement.
- \end{enumerate}
- \item\label{LPPL:item:change} If you make an `intention
- announcement' as described in~\ref{LPPL:item:intention} above and
- after three months your intention is challenged neither by the
- Current Maintainer nor by the Copyright Holder nor by other
- people, then you may arrange for the Work to be changed so as to
- name you as the (new) Current Maintainer.
-
- \item If the previously unreachable Current Maintainer becomes
- reachable once more within three months of a change completed
- under the terms of~\ref{LPPL:item:announce}
- or~\ref{LPPL:item:change}, then that Current Maintainer must
- become or remain the Current Maintainer upon request provided they
- then update their communication data within one month.
- \end{enumerate}
- A change in the Current Maintainer does not, of itself, alter the
- fact that the Work is distributed under the \LPPL\ license.
-
- If you become the Current Maintainer of the Work, you should
- immediately provide, within the Work, a prominent and unambiguous
- statement of your status as Current Maintainer. You should also
- announce your new status to the same pertinent community as
- in~\ref{LPPL:item:intention} above.
-
- \LPPLsubsection{Whether and How to Distribute Works under This License}
- \label{LPPL:Distribute}
-
- This section contains important instructions, examples, and
- recommendations for authors who are considering distributing their
- works under this license. These authors are addressed as `you' in
- this section.
-
- \LPPLsubsubsection{Choosing This License or Another License}
- \label{LPPL:Choosing}
-
- If for any part of your work you want or need to use
- \emph{distribution} conditions that differ significantly from those
- in this license, then do not refer to this license anywhere in your
- work but, instead, distribute your work under a different license.
- You may use the text of this license as a model for your own
- license, but your license should not refer to the \LPPL\ or
- otherwise give the impression that your work is distributed under
- the \LPPL.
-
- The document \LPPLdocfile{modguide} in the base \LaTeX\ distribution
- explains the motivation behind the conditions of this license. It
- explains, for example, why distributing \LaTeX\ under the
- \textsc{gnu} General Public License (\textsc{gpl}) was considered
- inappropriate. Even if your work is unrelated to \LaTeX, the
- discussion in \LPPLdocfile{modguide} may still be relevant, and authors
- intending to distribute their works under any license are encouraged
- to read it.
-
- \LPPLsubsubsection{A Recommendation on Modification Without Distribution}
- \label{LPPL:WithoutDistribution}
-
- It is wise never to modify a component of the Work, even for your
- own personal use, without also meeting the above conditions for
- distributing the modified component. While you might intend that
- such modifications will never be distributed, often this will happen
- by accident -- you may forget that you have modified that component;
- or it may not occur to you when allowing others to access the
- modified version that you are thus distributing it and violating the
- conditions of this license in ways that could have legal
- implications and, worse, cause problems for the community. It is
- therefore usually in your best interest to keep your copy of the
- Work identical with the public one. Many works provide ways to
- control the behavior of that work without altering any of its
- licensed components.
-
- \LPPLsubsubsection{How to Use This License}
- \label{LPPL:HowTo}
-
- To use this license, place in each of the components of your work
- both an explicit copyright notice including your name and the year
- the work was authored and/or last substantially modified. Include
- also a statement that the distribution and/or modification of that
- component is constrained by the conditions in this license.
-
- Here is an example of such a notice and statement:
-\begin{verbatim}
- %% pig.dtx
- %% Copyright 2005 M. Y. Name
- %
- % This work may be distributed and/or modified under the
- % conditions of the LaTeX Project Public License, either version 1.3
- % of this license or (at your option) any later version.
- % The latest version of this license is in
- % https://www.latex-project.org/lppl.txt
- % and version 1.3 or later is part of all distributions of LaTeX
- % version 2005/12/01 or later.
- %
- % This work has the LPPL maintenance status `maintained'.
- %
- % The Current Maintainer of this work is M. Y. Name.
- %
- % This work consists of the files pig.dtx and pig.ins
- % and the derived file pig.sty.
-\end{verbatim}
-
- Given such a notice and statement in a file, the conditions given in
- this license document would apply, with the `Work' referring to the
- three files `\LPPLfile{pig.dtx}', `\LPPLfile{pig.ins}', and
- `\LPPLfile{pig.sty}' (the last being generated from
- `\LPPLfile{pig.dtx}' using `\LPPLfile{pig.ins}'), the `Base
- Interpreter' referring to any `\LaTeX-Format', and both `Copyright
- Holder' and `Current Maintainer' referring to the person `M. Y.
- Name'.
-
- If you do not want the Maintenance section of \LPPL\ to apply to
- your Work, change `maintained' above into `author-maintained'.
- However, we recommend that you use `maintained' as the Maintenance
- section was added in order to ensure that your Work remains useful
- to the community even when you can no longer maintain and support it
- yourself.
-
- \LPPLsubsubsection{Derived Works That Are Not Replacements}
- \label{LPPL:NotReplacements}
-
- Several clauses of the \LPPL\ specify means to provide reliability
- and stability for the user community. They therefore concern
- themselves with the case that a Derived Work is intended to be used
- as a (compatible or incompatible) replacement of the original
- Work. If this is not the case (e.g., if a few lines of code are
- reused for a completely different task), then clauses
- \ref{LPPL:item:changelog} and \ref{LPPL:item:unmodifiedcopy}
- shall not apply.
-
- \LPPLsubsubsection{Important Recommendations}
- \label{LPPL:Recommendations}
-
- \LPPLparagraph{Defining What Constitutes the Work}
-
- The \LPPL\ requires that distributions of the Work contain all the
- files of the Work. It is therefore important that you provide a way
- for the licensee to determine which files constitute the Work. This
- could, for example, be achieved by explicitly listing all the files
- of the Work near the copyright notice of each file or by using a
- line such as:
-\begin{verbatim}
- % This work consists of all files listed in manifest.txt.
-\end{verbatim}
- in that place. In the absence of an unequivocal list it might be
- impossible for the licensee to determine what is considered by you
- to comprise the Work and, in such a case, the licensee would be
- entitled to make reasonable conjectures as to which files comprise
- the Work.
-
-\end{LPPLicense}
-\endinput
Deleted: trunk/Master/texmf-dist/tex/latex/base/source2e.tex
===================================================================
--- trunk/Master/texmf-dist/tex/latex/base/source2e.tex 2018-04-29 23:31:02 UTC (rev 47499)
+++ trunk/Master/texmf-dist/tex/latex/base/source2e.tex 2018-04-29 23:33:08 UTC (rev 47500)
@@ -1,503 +0,0 @@
-% \iffalse meta-comment
-%
-% Copyright 1993-2016
-% The LaTeX3 Project and any individual authors listed elsewhere
-% in this file.
-%
-% This file is part of the LaTeX base system.
-% -------------------------------------------
-%
-% It may be distributed and/or modified under the
-% conditions of the LaTeX Project Public License, either version 1.3c
-% of this license or (at your option) any later version.
-% The latest version of this license is in
-% https://www.latex-project.org/lppl.txt
-% and version 1.3c or later is part of all distributions of LaTeX
-% version 2005/12/01 or later.
-%
-% This file has the LPPL maintenance status "maintained".
-%
-% The list of all files belonging to the LaTeX base distribution is
-% given in the file `manifest.txt'. See also `legal.txt' for additional
-% information.
-%
-% The list of derived (unpacked) files belonging to the distribution
-% and covered by LPPL is defined by the unpacking scripts (with
-% extension .ins) which are part of the distribution.
-%
-% \fi
-
-% This document will typeset the LaTeX sources as a single document.
-% This will produce quite a large file (roughly 555 pages) and may
-% take a long time.
-%
-% Some notes on processing this document are contained at the end
-% of this document, after \end{document}
-%
-% DPC 1997/11/17
-%
-% First a special index style for makeindex
-%
-
-\begin{filecontents}{source2e.ist}
-actual '='
-quote '!'
-level '>'
-preamble
-"\n \\begin{theindex} \n \\makeatletter\\scan at allowedfalse\n"
-postamble
-"\n\n \\end{theindex}\n"
-item_x1 "\\efill \n \\subitem "
-item_x2 "\\efill \n \\subsubitem "
-delim_0 "\\pfill "
-delim_1 "\\pfill "
-delim_2 "\\pfill "
-% The next lines will produce some warnings when
-% running Makeindex as they try to cover two different
-% versions of the program:
-lethead_prefix "{\\bfseries\\hfil "
-lethead_suffix "\\hfil}\\nopagebreak\n"
-lethead_flag 1
-heading_prefix "{\\bfseries\\hfil "
-heading_suffix "\\hfil}\\nopagebreak\n"
-headings_flag 1
-
-% and just for source2e:
-% Remove R so I is treated in sequence I J K not I II III
-page_precedence "rnaA"
-\end{filecontents}
-
-
-
-\documentclass{ltxdoc}
-
-\listfiles
-
-% Do not index some TeX primitives, and some common plain TeX commands.
-
-\DoNotIndex{\def,\long,\edef,\xdef,\gdef,\let,\global}
-\DoNotIndex{\if,\ifnum,\ifdim,\ifcat,\ifmmode,\ifvmode,\ifhmode,%
- \iftrue,\iffalse,\ifvoid,\ifx,\ifeof,\ifcase,\else,\or,\fi}
-\DoNotIndex{\box,\copy,\setbox,\unvbox,\unhbox,\hbox,%
- \vbox,\vtop,\vcenter}
-\DoNotIndex{\@empty,\immediate,\write}
-\DoNotIndex{\egroup,\bgroup,\expandafter,\begingroup,\endgroup}
-\DoNotIndex{\divide,\advance,\multiply,\count,\dimen}
-\DoNotIndex{\relax,\space,\string}
-\DoNotIndex{\csname,\endcsname,\@spaces,\openin,\openout,%
- \closein,\closeout}
-\DoNotIndex{\catcode,\endinput}
-\DoNotIndex{\jobname,\message,\read,\the,\m at ne,\noexpand}
-\DoNotIndex{\hsize,\vsize,\hskip,\vskip,\kern,\hfil,\hfill,\hss}
-\DoNotIndex{\m at ne,\z@,\z at skip,\@ne,\tw@,\p@}
-\DoNotIndex{\dp,\wd,\ht,\vss,\unskip}
-
-% Set up the Index and Change History to use \part
-\IndexPrologue{\part*{Index}%
- \markboth{Index}{Index}%
- \addcontentsline{toc}{part}{Index}%
- The italic numbers denote the pages where the
- corresponding entry is described,
- numbers underlined point to the definition,
- all others indicate the places where it is used.}
-
-\GlossaryPrologue{\part*{Change History}%
-% Allow control names to be hyphenated here...
- {\GlossaryParms\ttfamily\hyphenchar\font=`\-}%
- \markboth{Change History}{Change History}%
- \addcontentsline{toc}{part}{Change History}}
-
-% The standard \changes command modified slightly to better cope with
-% this multiple file document.
-\makeatletter
-\def\@changes at iso@date#1/#2/#3/#4\space{#1\if\relax#2\relax\else-#2-#3\fi\space}
-\def\changes@#1#2#3{%
- \let\protect\@unexpandable at protect
- \edef\@tempa{\noexpand\glossary{\@changes at iso@date#2///\space
- \currentfile\space#1\levelchar
- \ifx\saved at macroname\@empty
- \space
- \actualchar
- \generalname
- \else
- \expandafter\@gobble
- \saved at macroname
- \actualchar
- \string\verb\quotechar*%
- \verbatimchar\saved at macroname
- \verbatimchar
- \fi
- :\levelchar #3}}%
- \@tempa\endgroup\@esphack}
-
-% Move whole block up so that the file key is not so close
-% to bottom of US letter page.
-\addtolength\topmargin{-2\baselineskip}
-
-
-% Codelines are allowed to run over a bit without showing up as overfull
-%
-\renewcommand*\MacroFont{\fontencoding\encodingdefault
- \fontfamily\ttdefault
- \fontseries\mddefault
- \fontshape\updefault
- \small
- \hfuzz 6pt\relax}
-
-% Section numbers now reach eg 74.17.2 which need more space
-\renewcommand*\l at subsection{\@dottedtocline{2}{1.5em}{2.8em}}
-\renewcommand*\l at subsubsection{\@dottedtocline{3}{3.8em}{3.4em}}
-\makeatother
-
-% Produce a Change Log and (2 column) Index.
-\RecordChanges
-\CodelineIndex
-\EnableCrossrefs
-\setcounter{IndexColumns}{2}
-
-% Needed for documentation in ltoutenc.dtx
-\usepackage{textcomp}
-
-\begin{document}
- \title{The \LaTeXe\ Sources}
- \author{%
- Johannes Braams\\
- David Carlisle\\
- Alan Jeffrey\\
- Leslie Lamport\\
- Frank Mittelbach\\
- Chris Rowley\\
- Rainer Sch\"opf}
-
-% This command will be used to input the patch file
-% if that file exists.
-\newcommand{\includeltpatch}{%
- \def\currentfile{ltpatch.ltx}
- \part{ltpatch}
- {\let\ttfamily\relax
- \xdef\filekey{\filekey, \thepart={\ttfamily\currentfile}}}%
- Things we did wrong\ldots
- \IndexInput{ltpatch.ltx}}
-
-
-
-% Get the date and patch level from ltvers.dtx
-\makeatletter
-\let\patchdate=\@empty
-\begingroup
- \def\ProvidesFile#1\fmtversion#2#3\patch at level#4{%
- \date{#2}\xdef\patchdate{#4}\endinput}
- \input{ltvers.dtx}
-\global\let\X at date=\@date
-
-% Add the patch version if available.
- \long\def\Xdef#1#2#3\def#4#5{%
- \xdef\X at date{#2}%
- \xdef\patchdate{#5}%
- \endinput}%
- \InputIfFileExists{ltpatch.ltx}
- {\let\def\Xdef}{\global\let\includeltpatch\relax}
-\endgroup
-
-\ifx\@date\X at date
- \def\Xpatch{0}
- \ifx\patchdate\Xpatch\else
- \edef\@date{\@date\space Patch level \patchdate}
- \fi
-\else
- \@warning{ltpatch.ltx does not match ltvers.dtx!}
- \let\includeltpatch\relax
-\fi
-\makeatother
-
- \pagenumbering{roman}
-
- \MaintainedByLaTeXTeam{latex}
- \maketitle
- \renewcommand\maketitle{}
-
- \tableofcontents
-
- \clearpage
-
- \pagenumbering{arabic}
-
-%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
-
-% Each of the following \DocInclude lines includes a file with extension
-% .dtx. Each of these files may be typeset separately. For instance
-% latex ltboxes.dtx
-% will typeset the source of the LaTeX box commands.
-%
-% If this file is processed, each of these separate dtx files will be
-% contained as a part of a single document. Using ltxdoc.cfg you can
-% then optionally produce a combined index and/or change history for
-% the entire source of the format file. Note that such a document will
-% be quite large (about 555 pages).
-%
-
- \DocInclude{ltdirchk} % System dependent initialisation
-
- \DocInclude{ltplain} % LaTeX version of Knuth's plain.tex
-
- \DocInclude{ltvers} % Current version date
-
- \DocInclude{ltdefns} % Initial definitions.
-
- \DocInclude{ltalloc} % Allocation of counters and others.
-
- \DocInclude{ltcntrl} % Program control macros.
-
- \DocInclude{lterror} % Error handling.
-
- \DocInclude{ltpar} % Paragraphs.
-
- \DocInclude{ltspace} % Spacing, line and page breaking.
-
- \DocInclude{ltlogos} % Logos.
-
- \DocInclude{ltfiles} % \input files and related commands
-
- \DocInclude{ltoutenc} % Output encoding interface
-
- \DocInclude{ltcounts} % Counters
-
- \DocInclude{ltlength} % Lengths
-
- \DocInclude{ltfssbas} % NFSS Base macros
-
- \DocInclude{ltfsstrc} % NFSS Tracing (and tracefnt.sty)
-
- \DocInclude{ltfsscmp} % NFSS1 Compatibility
-
- \DocInclude{ltfssdcl} % NFSS Declarative interface
-
- \DocInclude{ltfssini} % NFSS Initialisation
-
- \DocInclude{fontdef} % fonttext.ltx/fontmath.ltx
-
- \DocInclude{preload} % preload.ltx
-
- \DocInclude{ltfntcmd} % \textrm etc
-
- \DocInclude{ltpageno} % Page numbering
-
- \DocInclude{ltxref} % Cross referencing
-
- \DocInclude{ltmiscen} % Miscellaneous environment definitions.
-
- \DocInclude{ltmath} % Mathematics set up.
-
- \DocInclude{ltlists} % List and related environments
-
- \DocInclude{ltboxes} % Parbox and friends
-
- \DocInclude{lttab} % Tabbing tabular and array
-
- \DocInclude{ltpictur} % Picture mode
-
- \DocInclude{ltthm} % Theorem environments
-
- \DocInclude{ltsect} % Sectioning
-
- \DocInclude{ltfloat} % Floats
-
- \DocInclude{ltidxglo} % Index and Glossary
-
- \DocInclude{ltbibl} % Bibliography
-
- \DocInclude{ltpage} % \pagestyle \raggedbottom \sloppy
-
- \DocInclude{ltoutput} % Output routine
-
- \DocInclude{ltclass} % Package & Class interface
-
- \DocInclude{lthyphen} % Hyphenation (hyphen.ltx).
-
- \DocInclude{ltluatex} % Luatex support
-
- \DocInclude{ltfinal} % Last minute initialisations and dump
-
- \includeltpatch % Corrections distributed after the full release
-
-% Stop here if ltxdoc.cfg says \AtEndOfClass{\OnlyDescription}
-\StopEventually{\end{document}}
-
-\clearpage
-\pagestyle{headings}
-
-% Make TeX shut up.
-\hbadness=10000
-\newcount\hbadness
-\hfuzz=\maxdimen
-
-\typeout{%
- \string # Produce change log with^^J%
- makeindex -s gglo.ist -o source2e.gls source2e.glo}
-
-
-\PrintChanges
-
-\clearpage
-
-% makeindex needs a symbol between the parts of composite page numbers
-% but we dont want one, so:
-\typeout{%
- \string # Produce index with^^J%
- makeindex -s source2e.ist source2e.idx}
-
-\begingroup
-\def\endash{--}
-\catcode`\-\active
-\def-{\futurelet\temp\indexdash}
-\def\indexdash{\ifx\temp-\endash\fi}
-
-\PrintIndex
-\endgroup
-
-% Make sure that the index is not printed twice
-% (ltxdoc.cfg might have a second \PrintIndex command)
-\let\PrintChanges\relax
-\let\PrintIndex\relax
-
-\end{document}
-
-
-%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
-
-To use this file to produce a fully indexed source code
-you need to execute the following (or equivalent) commands:
-
- latex source2e.tex
-
- makeindex -s source2e.ist source2e.idx
- makeindex -s gglo.ist -o source2e.gls source2e.glo
-
- latex source2e.tex
- latex source2e.tex
-
-
-The makeindex style source2e.ist is used in place of the usual
-doc gind.ist to ensure that I is used in the sequence I J K
-not I II II, which would be the default makeindex behaviour.
-
-The third run with latex is only required to get the table of
-contents entries for the change log and index. You may speed things up
-by using the \includeonly mechanism so as not to typeset the source
-files on the second run. This involves changing the file
-ltxdoc.cfg
-between the latex runs.
-
-The following unix script automates this.
- (It could easily be ported to scripts for DOS or VMS,
- rm is ReMove a file, and echo "..." > file writes ... to "file".)
-
-
-After this script (after the second ==============) is a similar script
-that will produce the documentation for all the files in the base
-distribution that are *not* included in source2e.dvi. This second script
-was requested, but before using it, beware it will take a long time!
-It may however be modified as required, eg to not typeset the fdd files
-or whatever...
-
-==============
-#!/bin/sh
-
-rm -f source2e.gls source2e.ind source2e.toc
-
-# First run:
-# Create new standard ltxdoc.cfg file
-# Pass the (possibly empty) list of arguments supplied on the
-# command line to article class.
-#
-# If you use A4 paper, running this script with argument
-# a4paper
-# may save about 30 pages.
-#
-echo "\PassOptionsToClass{$*}{article}" > ltxdoc.cfg
-
-
-# Now LaTeX the file with this cfg file.
-#
-pdflatex source2e.tex
-
-
-# Make the Change log and Glossary.
-#
-makeindex -s source2e.ist source2e.idx
-makeindex -s gglo.ist -o source2e.gls source2e.glo
-
-
-# Second run: append \includeonly{} to ltxdoc.cfg to speed up things
-# (this run needed only to get changes and index listed in .toc file)
-#
-# Note that the index will not be made incorrect by the insertion
-# of the table of contents as the front matter uses a different page
-# numbering scheme.
-#
-echo "\includeonly{}" >> ltxdoc.cfg
-
-pdflatex source2e.tex
-
-
-# Third and final run, to put everything together.
-# First restore the cfg file:
-#
-echo "\PassOptionsToClass{$*}{article}" > ltxdoc.cfg
-pdflatex source2e.tex
-
-
-==============
-#!/bin/sh
-
-# Running this script will process all the dtx fdd and *guide.tex
-# and ltnews*.tex files in the LaTeX distribution, except the dtx
-# files included in source2e.tex.
-# (The shell first script in the comments of source2e.tex will
-# process those.)
-
-# Any command line arguments (eg a4paper) are taken as options to the
-# article class.
-
-# This script is likely to take ages!
-
-echo "\PassOptionsToClass{$*}{article}" > ltxdoc.cfg
-echo "\batchmode" >> ltxdoc.cfg
-
-# The next four lines produce full indexes and change logs
-# you may not want those.
-echo "\AtBeginDocument{\RecordChanges}" >> ltxdoc.cfg
-echo "\AtEndDocument{\PrintChanges}" >> ltxdoc.cfg
-echo "\AtBeginDocument{\CodelineIndex\EnableCrossrefs}" >> ltxdoc.cfg
-echo "\AtEndDocument{\PrintIndex}" >> ltxdoc.cfg
-
-# If you do not want any code listings, just documentation, then instead
-# of the above four lines, uncomment the following:
-# echo "\AtBeginDocument{\OnlyDescription}" >> ltxdoc.cfg
-
-
-for i in *dtx *fdd
-do
-B=`basename $i .dtx`
-
-if (grep "Include{$B}" source2e.tex >/dev/null ; )
-then
-echo In source2e: $i
-else
-echo pdflatex $i
- if (pdflatex $i > /dev/null)
- then
- echo pdflatex $i
- pdflatex $i > /dev/null
- echo makeindex -s gind.ist $B.idx
- makeindex -s gind.ist $B.idx > /dev/null 2> /dev/null
- echo makeindex -s gglo.ist -o $B.gls $B.glo
- makeindex -s gglo.ist -o $B.gls $B.glo > /dev/null 2> /dev/null
- echo pdflatex $i
- pdflatex $i > /dev/null
- else
- echo "!!! LaTeX ERROR: $i. (See $B.log.)"
- fi
-fi
-
-done
Deleted: trunk/Master/texmf-dist/tex/latex/base/utf8-test.tex
===================================================================
--- trunk/Master/texmf-dist/tex/latex/base/utf8-test.tex 2018-04-29 23:31:02 UTC (rev 47499)
+++ trunk/Master/texmf-dist/tex/latex/base/utf8-test.tex 2018-04-29 23:33:08 UTC (rev 47500)
@@ -1,78 +0,0 @@
-%%
-%% This is file `utf8-test.tex',
-%% generated with the docstrip utility.
-%%
-%% The original source files were:
-%%
-%% utf8ienc.dtx (with options: `test')
-%%
-%% This is a generated file.
-%%
-%% The source is maintained by the LaTeX Project team and bug
-%% reports for it can be opened at https://latex-project.org/bugs.html
-%% (but please observe conditions on bug reports sent to that address!)
-%%
-%%
-%% Copyright 1993-2017
-%% The LaTeX3 Project and any individual authors listed elsewhere
-%% in this file.
-%%
-%% This file was generated from file(s) of the LaTeX base system.
-%% --------------------------------------------------------------
-%%
-%% It may be distributed and/or modified under the
-%% conditions of the LaTeX Project Public License, either version 1.3c
-%% of this license or (at your option) any later version.
-%% The latest version of this license is in
-%% https://www.latex-project.org/lppl.txt
-%% and version 1.3c or later is part of all distributions of LaTeX
-%% version 2005/12/01 or later.
-%%
-%% This file has the LPPL maintenance status "maintained".
-%%
-%% This file may only be distributed together with a copy of the LaTeX
-%% base system. You may however distribute the LaTeX base system without
-%% such generated files.
-%%
-%% The list of all files belonging to the LaTeX base distribution is
-%% given in the file `manifest.txt'. See also `legal.txt' for additional
-%% information.
-%%
-%% The list of derived (unpacked) files belonging to the distribution
-%% and covered by LPPL is defined by the unpacking scripts (with
-%% extension .ins) which are part of the distribution.
-\ProvidesFile{utf8-test.tex}
- [2018/04/05 v1.2c UTF-8 support for inputenc]
-\documentclass{article}
-
-\usepackage[latin1,utf8]{inputenc}
-\usepackage[T1]{fontenc}
-\usepackage{trace}
-
-\scrollmode % to run past the error below
-
-\begin{document}
-
- German umlauts in UTF-8: ^^c3^^a4^^c3^^b6^^c3^^bc %%% ^^c3^^a4^^c3^^b6^^c3^^bc
-
-\inputencoding{latin1} % switch to latin1
-
- German umlauts in UTF-8 but read by latin1 (and will produce one
- error since \verb=\textcurrency= is not provided):
- ^^c3^^a4^^c3^^b6^^c3^^bc
-
-\inputencoding{utf8} % switch back to utf8
-
- German umlauts in UTF-8: ^^c3^^a4^^c3^^b6^^c3^^bc
-
-Some codes that should produce errors as nothing is set up
-for them: ^^c3F ^^e1^^a4^^b6
-
-And some that are not legal utf8 sequences: ^^c3X ^^e1XY
-
-\showoutput
-\tracingstats=2
-\stop
-\endinput
-%%
-%% End of file `utf8-test.tex'.
Deleted: trunk/Master/texmf-dist/tex/latex/base/utf8test.tex
===================================================================
--- trunk/Master/texmf-dist/tex/latex/base/utf8test.tex 2018-04-29 23:31:02 UTC (rev 47499)
+++ trunk/Master/texmf-dist/tex/latex/base/utf8test.tex 2018-04-29 23:33:08 UTC (rev 47500)
@@ -1,78 +0,0 @@
-%%
-%% This is file `utf8test.tex',
-%% generated with the docstrip utility.
-%%
-%% The original source files were:
-%%
-%% utf8ienc.dtx (with options: `test')
-%%
-%% This is a generated file.
-%%
-%% The source is maintained by the LaTeX Project team and bug
-%% reports for it can be opened at https://latex-project.org/bugs.html
-%% (but please observe conditions on bug reports sent to that address!)
-%%
-%%
-%% Copyright 1993-2017
-%% The LaTeX3 Project and any individual authors listed elsewhere
-%% in this file.
-%%
-%% This file was generated from file(s) of the LaTeX base system.
-%% --------------------------------------------------------------
-%%
-%% It may be distributed and/or modified under the
-%% conditions of the LaTeX Project Public License, either version 1.3c
-%% of this license or (at your option) any later version.
-%% The latest version of this license is in
-%% https://www.latex-project.org/lppl.txt
-%% and version 1.3c or later is part of all distributions of LaTeX
-%% version 2005/12/01 or later.
-%%
-%% This file has the LPPL maintenance status "maintained".
-%%
-%% This file may only be distributed together with a copy of the LaTeX
-%% base system. You may however distribute the LaTeX base system without
-%% such generated files.
-%%
-%% The list of all files belonging to the LaTeX base distribution is
-%% given in the file `manifest.txt'. See also `legal.txt' for additional
-%% information.
-%%
-%% The list of derived (unpacked) files belonging to the distribution
-%% and covered by LPPL is defined by the unpacking scripts (with
-%% extension .ins) which are part of the distribution.
-\ProvidesFile{utf8-test.tex}
- [2018/04/05 v1.2c UTF-8 support for inputenc]
-\documentclass{article}
-
-\usepackage[latin1,utf8]{inputenc}
-\usepackage[T1]{fontenc}
-\usepackage{trace}
-
-\scrollmode % to run past the error below
-
-\begin{document}
-
- German umlauts in UTF-8: ^^c3^^a4^^c3^^b6^^c3^^bc %%% ^^c3^^a4^^c3^^b6^^c3^^bc
-
-\inputencoding{latin1} % switch to latin1
-
- German umlauts in UTF-8 but read by latin1 (and will produce one
- error since \verb=\textcurrency= is not provided):
- ^^c3^^a4^^c3^^b6^^c3^^bc
-
-\inputencoding{utf8} % switch back to utf8
-
- German umlauts in UTF-8: ^^c3^^a4^^c3^^b6^^c3^^bc
-
-Some codes that should produce errors as nothing is set up
-for them: ^^c3F ^^e1^^a4^^b6
-
-And some that are not legal utf8 sequences: ^^c3X ^^e1XY
-
-\showoutput
-\tracingstats=2
-\stop
-\endinput
-%%
-%% End of file `utf8test.tex'.
Deleted: trunk/Master/texmf-dist/tex/latex/tools/.tex
===================================================================
--- trunk/Master/texmf-dist/tex/latex/tools/.tex 2018-04-29 23:31:02 UTC (rev 47499)
+++ trunk/Master/texmf-dist/tex/latex/tools/.tex 2018-04-29 23:33:08 UTC (rev 47500)
@@ -1,41 +0,0 @@
-%%
-%% This is file `.tex',
-%% generated with the docstrip utility.
-%%
-%% The original source files were:
-%%
-%% fileerr.dtx (with options: `return')
-%%
-%% This is a generated file.
-%%
-%% The source is maintained by the LaTeX Project team and bug
-%% reports for it can be opened at https://latex-project.org/bugs/
-%% (but please observe conditions on bug reports sent to that address!)
-%%
-%%
-%% Copyright 1993-2017
-%% The LaTeX3 Project and any individual authors listed elsewhere
-%% in this file.
-%%
-%% This file was generated from file(s) of the Standard LaTeX `Tools Bundle'.
-%% --------------------------------------------------------------------------
-%%
-%% It may be distributed and/or modified under the
-%% conditions of the LaTeX Project Public License, either version 1.3c
-%% of this license or (at your option) any later version.
-%% The latest version of this license is in
-%% https://www.latex-project.org/lppl.txt
-%% and version 1.3c or later is part of all distributions of LaTeX
-%% version 2005/12/01 or later.
-%%
-%% This file may only be distributed together with a copy of the LaTeX
-%% `Tools Bundle'. You may however distribute the LaTeX `Tools Bundle'
-%% without such generated files.
-%%
-%% The list of all files belonging to the LaTeX `Tools Bundle' is
-%% given in the file `manifest.txt'.
-%%
- \message{File ignored}
-\endinput
-%%
-%% End of file `.tex'.
Modified: trunk/Master/texmf-dist/tex/latex/tools/multicol.sty
===================================================================
--- trunk/Master/texmf-dist/tex/latex/tools/multicol.sty 2018-04-29 23:31:02 UTC (rev 47499)
+++ trunk/Master/texmf-dist/tex/latex/tools/multicol.sty 2018-04-29 23:33:08 UTC (rev 47500)
@@ -107,7 +107,7 @@
\DeclareCurrentRelease{}{2018-04-01}
\ProvidesPackage{multicol}
- [2018/04/01 v1.8r multicolumn formatting (FMi)]
+ [2018/04/20 v1.8s multicolumn formatting (FMi)]
%%
\DeclareOption{twocolumn}
{\PackageWarning{multicol}{May not work
@@ -340,7 +340,9 @@
\@checkend{multicols}%
\endgroup
\global\c at unbalance\z@
- \if at boxedmulticols\else
+ \if at boxedmulticols
+ \mc at col@status at write
+ \else
\reinsert at footnotes
\ifdim \pagegoal=\maxdimen
\global\vsize\@colroom
More information about the tex-live-commits
mailing list