[pstricks] pst-jtree and pst-labo
Norberto Moreno Quiben
Norberto.Moreno at uclm.es
Fri Oct 21 20:56:43 CEST 2005
> Norberto Moreno Quiben wrote:
>
>> When using pst-jfree in conjunction pst-labo no color is obtained in
>> the labo-objects. Any suggestions?
>
>
>
> a problem with the style=... definition in pst-jftree
> Try it with http://perce.de/LaTeX/pst-jftree/pst-jftree.tex
>
> John, can you please have a look at your code, if
> the \psset{style=..} is really needed as a global
> setting.
>
> Herbert
>
>
> _______________________________________________
> pstricks mailing list
> pstricks at tug.org
> http://tug.org/mailman/listinfo/pstricks
>
>
>
Thanks Herbert,
The color on labo-objects is back, but the trees are not drawn. I send
you a copy of the tree drawn with the old pst-jftree and the output of
the listfiles command of the problematic example.
Best
Norberto Moreno
-------------------------------------------------------------------------------
\documentclass[letterpaper]{article}
\usepackage{pstricks}
\usepackage{pst-jftree}
\usepackage{pst-labo}
\definecolor{lightblue}{rgb}{0.9,0.9,1}
%
\listfiles
\begin{document}
\begin{pspicture}(-1.5,-2.5)(10.5,2.5)
\psset{unit=0.5}
\pstTubeEssais[glassType=flacon]
\pstTubeEssais[glassType=flacon,niveauLiquide1=40]
\pstTubeEssais[glassType=flacon,niveauLiquide1=60]
\end{pspicture}
\defvartriangle\medvartri(1)
\defbranch\longleft(15pt)(.5)
\defbranch\longright(15pt)(-.5)
\defbranch\medleft(15pt)(1)
\defbranch\medright(15pt)(-1)
\defbranch\veryshallowright(1)(-.3)
\defbranch\shallowright(1)(-1/2)
\defbranch\medright(1)(-1)
\defbranch\medvert(1)(1/0)
\defbranch\medleft(1)(1/1)
\defbranch\shallowleft(1)(.5)
\defbranch\veryshallowleft(1)(3/10)
\deftriangle\offsettri(1)(1.3)(-.8)
\def\triline#1{\hbox to\jfttriwd{#1}}
\def\rpnode(#1)#2{\rput(#1){\pnode{#2}}}
\defbranch\steepmedright(1)(-2)
\defbranch\steepmedleft(1)(2)
\deftriangle\fixedtri(.8)(1)(-1)
\def\overnode#1#2{\vtop{\offinterlineskip
\halign{\hfil##\hfil\cr \vrule width0pt depth5pt #2\cr \pnode{#1}\cr}}}
\deftriangle\fixedtri(1)(2)(-2)
\begin{minipage}[b]{\linewidth}
\quad \everymath={\rm}%
\jftree[xunit=54pt,yunit=22pt,triratio=.5]
\!\0{DegreeP}\medleft\1\medright\2\cr
\!\1{almost}\cr
\!\2{$Degree^{'}$}\medleft\3\medright\4\cr
\!\3{Degree}\medvert\5\cr
\!\5{half}\cr
\!\4{ADJP}\medvartri{full}\cr
\endjftree
\end{minipage}
\end{document}
------------------------------------------------------------------------------------------
This is e-TeX, Version 3.141592-2.2 (MiKTeX 2.4) (preloaded format=latex
2005.10.21) 21 OCT 2005 20:01
entering extended mode
**bottle_pst-jftree.tex
(bottle_pst-jftree.tex
LaTeX2e <2003/12/01>
Babel <v3.8g> and hyphenation patterns for english, french, german,
ngerman, ca
talan, italian, latin, spanish, dumylang, nohyphenation, loaded.
(C:\texmf\tex\latex\base\article.cls
Document Class: article 2004/02/16 v1.4f Standard LaTeX document class
(C:\texmf\tex\latex\base\size10.clo
File: size10.clo 2004/02/16 v1.4f Standard LaTeX file (size option)
)
\c at part=\count79
\c at section=\count80
\c at subsection=\count81
\c at subsubsection=\count82
\c at paragraph=\count83
\c at subparagraph=\count84
\c at figure=\count85
\c at table=\count86
\abovecaptionskip=\skip41
\belowcaptionskip=\skip42
\bibindent=\dimen102
) (C:\texmf\tex\latex\pstricks\pstricks.sty
Package: pstricks 2004/05/12 v0.2l LaTeX wrapper for `PSTricks' (RN,HV)
(C:\texmf\tex\generic\pstricks\pstricks.tex
`PSTricks' v1.07 <2005/05/06> (tvz)
\pst at dima=\dimen103
\pst at dimb=\dimen104
\pst at dimc=\dimen105
\pst at dimd=\dimen106
\pst at dimg=\dimen107
\pst at dimh=\dimen108
\pst at hbox=\box26
\pst at boxg=\box27
\pst at cnta=\count87
\pst at cntb=\count88
\pst at cntc=\count89
\pst at cntd=\count90
\pst at cntg=\count91
\pst at cnth=\count92
\pst at toks=\toks14
(C:\texmf\tex\generic\pstricks\pstricks.con)
\psunit=\dimen109
\psxunit=\dimen110
\psyunit=\dimen111
\pslinewidth=\dimen112
\pst at customdefs=\toks15
\pslinearc=\dimen113
\everypsbox=\toks16
\psframesep=\dimen114
\pslabelsep=\dimen115
\theoverlaybox=\box28
)
File: pstricks.tex 2005/05/06 v1.07 `PSTricks' (tvz)
(C:\texmf\tex\latex\xcolor\xcolor.sty
Package: xcolor 2005/10/15 v2.06 LaTeX color extensions (UK)
(C:\texmf\tex\latex\00miktex\color.cfg
File: color.cfg 2003/03/08 v1.0 MiKTeX 'color' configuration
)
Package xcolor Info: Package option `override' ignored on input line 191.
Package xcolor Info: Driver file: dvips.def on input line 200.
(C:\texmf\tex\latex\graphics\dvips.def
File: dvips.def 1999/02/16 v3.0i Driver-dependant file (DPC,SPQR)
)
Package xcolor Info: Model `cmy' substituted by `cmy0' on input line 1165.
Package xcolor Info: Model `RGB' extended on input line 1183.
Package xcolor Info: Model `HTML' substituted by `rgb' on input line 1185.
Package xcolor Info: Model `HSB' substituted by `hsb' on input line 1186.
Package xcolor Info: Model `Gray' substituted by `gray' on input line 1187.
Package xcolor Info: Model `wave' substituted by `hsb' on input line 1188.
))
(C:\texmf\tex\generic\pst-jftree\pst-jftree.sty
Package: pst-jftree 2004/01/10 package wrapper for PSTricks pst-jftree.tex
(C:\texmf\tex\generic\pst-jftree\pst-jftree.tex
(C:\texmf\tex\generic\pstricks\pst-node.tex v97 patch 11, 2000/11/09
\psrow=\count93
\pscol=\count94
\psmatrixcnt=\count95
\psrowsep=\skip43
\pscolsep=\skip44
)
(C:\texmf\tex\generic\xkeyval\pst-xkey.tex
File: pst-xkey.tex 2005/02/22 v1.5 PSTricks specialization of xkeyval (HA)
(C:\texmf\tex\latex\xkeyval\xkeyval.sty
Package: xkeyval 2005/08/12 v2.5d package option processing (HA)
(C:\texmf\tex\generic\xkeyval\xkeyval.tex
\XKV at toks=\toks17
\XKV at depth=\count96
File: xkeyval.tex 2005/08/12 v2.5d key=value parser (HA)
(C:\texmf\tex\generic\xkeyval\keyval.tex)))) `PST-jftree' v0.02,
05/10/21 (JF)
\jfteverynode=\toks18
\jft at xpos=\dimen116
\jft at ypos=\dimen117
\m at xl=\dimen118
\m at xr=\dimen119
\m at xb=\dimen120
\jft at treebox=\box29
)) (C:\localtexmf\tex\latex\pst-labo\pst-labo.sty
Package: pst-labo 2005/03/13 package wrapper for pst-labo.tex (hv)
(C:\localtexmf\tex\latex\pst-labo\pst-labo.tex
(C:\texmf\tex\generic\pstricks\pst-plot.tex v97 patch 2, 1999/12/12
(C:\texmf\tex\generic\multido\multido.tex v1.41, 2004/05/18 <tvz>
\multido at count=\count97
\multidocount=\count98
\multido at stuff=\toks19
))
(C:\texmf\tex\generic\multido\multido.tex v1.41, 2004/05/18 <tvz>)
(C:\texmf\tex\generic\pstricks\pst-grad.tex v1.04, 2004/06/24)
`PST-labo8' v2.02, 05/10/01 (ML/CJ/DG/HV)
(C:\localtexmf\tex\latex\pst-labo\pst-laboObj.tex)
\BulleX=\dimen121
\BulleY=\dimen122
\GrenailleX=\dimen123
\GrenailleY=\dimen124
\TournureX=\dimen125
\TournureY=\dimen126
\RAYONBULLE=\dimen127
\ClouX=\dimen128
\ClouY=\dimen129
\pst at FilamentWidth=\dimen130
\pst at dimA=\dimen131
\lab at AngleRotation=\count99
)
File: pst-labo.tex 05/10/01 v2.02 `PST-labo' (ML,DG,CJ,hv)
)
No file bottle_pst-jftree.aux.
LaTeX Font Info: Checking defaults for OML/cmm/m/it on input line 9.
LaTeX Font Info: ... okay on input line 9.
LaTeX Font Info: Checking defaults for T1/cmr/m/n on input line 9.
LaTeX Font Info: ... okay on input line 9.
LaTeX Font Info: Checking defaults for OT1/cmr/m/n on input line 9.
LaTeX Font Info: ... okay on input line 9.
LaTeX Font Info: Checking defaults for OMS/cmsy/m/n on input line 9.
LaTeX Font Info: ... okay on input line 9.
LaTeX Font Info: Checking defaults for OMX/cmex/m/n on input line 9.
LaTeX Font Info: ... okay on input line 9.
LaTeX Font Info: Checking defaults for U/cmr/m/n on input line 9.
LaTeX Font Info: ... okay on input line 9.
Overfull \hbox (149.47012pt too wide) in paragraph at lines 29--30
[][][]
[]
! Undefined control sequence.
l.32 \defvartriangle
\medvartri(1)
? s
OK, entering \scrollmode...
! Undefined control sequence.
l.32 \defvartriangle\medvartri
(1)
The control sequence at the end of the top line
of your error message was never \def'ed. If you have
misspelled it (e.g., `\hobx'), type `I' and the correct
spelling (e.g., `I\hbox'). Otherwise just continue,
and I'll forget about whatever was undefined.
! Undefined control sequence.
l.33 \defbranch
\longleft(15pt)(.5)
The control sequence at the end of the top line
of your error message was never \def'ed. If you have
misspelled it (e.g., `\hobx'), type `I' and the correct
spelling (e.g., `I\hbox'). Otherwise just continue,
and I'll forget about whatever was undefined.
! Undefined control sequence.
l.33 \defbranch\longleft
(15pt)(.5)
The control sequence at the end of the top line
of your error message was never \def'ed. If you have
misspelled it (e.g., `\hobx'), type `I' and the correct
spelling (e.g., `I\hbox'). Otherwise just continue,
and I'll forget about whatever was undefined.
! Undefined control sequence.
l.34 \defbranch
\longright(15pt)(-.5)
The control sequence at the end of the top line
of your error message was never \def'ed. If you have
misspelled it (e.g., `\hobx'), type `I' and the correct
spelling (e.g., `I\hbox'). Otherwise just continue,
and I'll forget about whatever was undefined.
! Undefined control sequence.
l.34 \defbranch\longright
(15pt)(-.5)
The control sequence at the end of the top line
of your error message was never \def'ed. If you have
misspelled it (e.g., `\hobx'), type `I' and the correct
spelling (e.g., `I\hbox'). Otherwise just continue,
and I'll forget about whatever was undefined.
! Undefined control sequence.
l.35 \defbranch
\medleft(15pt)(1)
The control sequence at the end of the top line
of your error message was never \def'ed. If you have
misspelled it (e.g., `\hobx'), type `I' and the correct
spelling (e.g., `I\hbox'). Otherwise just continue,
and I'll forget about whatever was undefined.
! Undefined control sequence.
l.35 \defbranch\medleft
(15pt)(1)
The control sequence at the end of the top line
of your error message was never \def'ed. If you have
misspelled it (e.g., `\hobx'), type `I' and the correct
spelling (e.g., `I\hbox'). Otherwise just continue,
and I'll forget about whatever was undefined.
! Undefined control sequence.
l.36 \defbranch
\medright(15pt)(-1)
The control sequence at the end of the top line
of your error message was never \def'ed. If you have
misspelled it (e.g., `\hobx'), type `I' and the correct
spelling (e.g., `I\hbox'). Otherwise just continue,
and I'll forget about whatever was undefined.
! Undefined control sequence.
l.36 \defbranch\medright
(15pt)(-1)
The control sequence at the end of the top line
of your error message was never \def'ed. If you have
misspelled it (e.g., `\hobx'), type `I' and the correct
spelling (e.g., `I\hbox'). Otherwise just continue,
and I'll forget about whatever was undefined.
! Undefined control sequence.
l.37 \defbranch
\veryshallowright(1)(-.3)
The control sequence at the end of the top line
of your error message was never \def'ed. If you have
misspelled it (e.g., `\hobx'), type `I' and the correct
spelling (e.g., `I\hbox'). Otherwise just continue,
and I'll forget about whatever was undefined.
! Undefined control sequence.
l.37 \defbranch\veryshallowright
(1)(-.3)
The control sequence at the end of the top line
of your error message was never \def'ed. If you have
misspelled it (e.g., `\hobx'), type `I' and the correct
spelling (e.g., `I\hbox'). Otherwise just continue,
and I'll forget about whatever was undefined.
! Undefined control sequence.
l.38 \defbranch
\shallowright(1)(-1/2)
The control sequence at the end of the top line
of your error message was never \def'ed. If you have
misspelled it (e.g., `\hobx'), type `I' and the correct
spelling (e.g., `I\hbox'). Otherwise just continue,
and I'll forget about whatever was undefined.
! Undefined control sequence.
l.38 \defbranch\shallowright
(1)(-1/2)
The control sequence at the end of the top line
of your error message was never \def'ed. If you have
misspelled it (e.g., `\hobx'), type `I' and the correct
spelling (e.g., `I\hbox'). Otherwise just continue,
and I'll forget about whatever was undefined.
! Undefined control sequence.
l.39 \defbranch
\medright(1)(-1)
The control sequence at the end of the top line
of your error message was never \def'ed. If you have
misspelled it (e.g., `\hobx'), type `I' and the correct
spelling (e.g., `I\hbox'). Otherwise just continue,
and I'll forget about whatever was undefined.
! Undefined control sequence.
l.39 \defbranch\medright
(1)(-1)
The control sequence at the end of the top line
of your error message was never \def'ed. If you have
misspelled it (e.g., `\hobx'), type `I' and the correct
spelling (e.g., `I\hbox'). Otherwise just continue,
and I'll forget about whatever was undefined.
! Undefined control sequence.
l.40 \defbranch
\medvert(1)(1/0)
The control sequence at the end of the top line
of your error message was never \def'ed. If you have
misspelled it (e.g., `\hobx'), type `I' and the correct
spelling (e.g., `I\hbox'). Otherwise just continue,
and I'll forget about whatever was undefined.
! Undefined control sequence.
l.40 \defbranch\medvert
(1)(1/0)
The control sequence at the end of the top line
of your error message was never \def'ed. If you have
misspelled it (e.g., `\hobx'), type `I' and the correct
spelling (e.g., `I\hbox'). Otherwise just continue,
and I'll forget about whatever was undefined.
! Undefined control sequence.
l.41 \defbranch
\medleft(1)(1/1)
The control sequence at the end of the top line
of your error message was never \def'ed. If you have
misspelled it (e.g., `\hobx'), type `I' and the correct
spelling (e.g., `I\hbox'). Otherwise just continue,
and I'll forget about whatever was undefined.
! Undefined control sequence.
l.41 \defbranch\medleft
(1)(1/1)
The control sequence at the end of the top line
of your error message was never \def'ed. If you have
misspelled it (e.g., `\hobx'), type `I' and the correct
spelling (e.g., `I\hbox'). Otherwise just continue,
and I'll forget about whatever was undefined.
! Undefined control sequence.
l.42 \defbranch
\shallowleft(1)(.5)
The control sequence at the end of the top line
of your error message was never \def'ed. If you have
misspelled it (e.g., `\hobx'), type `I' and the correct
spelling (e.g., `I\hbox'). Otherwise just continue,
and I'll forget about whatever was undefined.
! Undefined control sequence.
l.42 \defbranch\shallowleft
(1)(.5)
The control sequence at the end of the top line
of your error message was never \def'ed. If you have
misspelled it (e.g., `\hobx'), type `I' and the correct
spelling (e.g., `I\hbox'). Otherwise just continue,
and I'll forget about whatever was undefined.
! Undefined control sequence.
l.43 \defbranch
\veryshallowleft(1)(3/10)
The control sequence at the end of the top line
of your error message was never \def'ed. If you have
misspelled it (e.g., `\hobx'), type `I' and the correct
spelling (e.g., `I\hbox'). Otherwise just continue,
and I'll forget about whatever was undefined.
! Undefined control sequence.
l.43 \defbranch\veryshallowleft
(1)(3/10)
The control sequence at the end of the top line
of your error message was never \def'ed. If you have
misspelled it (e.g., `\hobx'), type `I' and the correct
spelling (e.g., `I\hbox'). Otherwise just continue,
and I'll forget about whatever was undefined.
! Undefined control sequence.
l.44 \deftriangle
\offsettri(1)(1.3)(-.8)
The control sequence at the end of the top line
of your error message was never \def'ed. If you have
misspelled it (e.g., `\hobx'), type `I' and the correct
spelling (e.g., `I\hbox'). Otherwise just continue,
and I'll forget about whatever was undefined.
! Undefined control sequence.
l.44 \deftriangle\offsettri
(1)(1.3)(-.8)
The control sequence at the end of the top line
of your error message was never \def'ed. If you have
misspelled it (e.g., `\hobx'), type `I' and the correct
spelling (e.g., `I\hbox'). Otherwise just continue,
and I'll forget about whatever was undefined.
! Undefined control sequence.
l.47 \defbranch
\steepmedright(1)(-2)
The control sequence at the end of the top line
of your error message was never \def'ed. If you have
misspelled it (e.g., `\hobx'), type `I' and the correct
spelling (e.g., `I\hbox'). Otherwise just continue,
and I'll forget about whatever was undefined.
! Undefined control sequence.
l.47 \defbranch\steepmedright
(1)(-2)
The control sequence at the end of the top line
of your error message was never \def'ed. If you have
misspelled it (e.g., `\hobx'), type `I' and the correct
spelling (e.g., `I\hbox'). Otherwise just continue,
and I'll forget about whatever was undefined.
! Undefined control sequence.
l.48 \defbranch
\steepmedleft(1)(2)
The control sequence at the end of the top line
of your error message was never \def'ed. If you have
misspelled it (e.g., `\hobx'), type `I' and the correct
spelling (e.g., `I\hbox'). Otherwise just continue,
and I'll forget about whatever was undefined.
! Undefined control sequence.
l.48 \defbranch\steepmedleft
(1)(2)
The control sequence at the end of the top line
of your error message was never \def'ed. If you have
misspelled it (e.g., `\hobx'), type `I' and the correct
spelling (e.g., `I\hbox'). Otherwise just continue,
and I'll forget about whatever was undefined.
! Undefined control sequence.
l.49 \deftriangle
\fixedtri(.8)(1)(-1)
The control sequence at the end of the top line
of your error message was never \def'ed. If you have
misspelled it (e.g., `\hobx'), type `I' and the correct
spelling (e.g., `I\hbox'). Otherwise just continue,
and I'll forget about whatever was undefined.
! Undefined control sequence.
l.49 \deftriangle\fixedtri
(.8)(1)(-1)
The control sequence at the end of the top line
of your error message was never \def'ed. If you have
misspelled it (e.g., `\hobx'), type `I' and the correct
spelling (e.g., `I\hbox'). Otherwise just continue,
and I'll forget about whatever was undefined.
! Undefined control sequence.
l.52 \deftriangle
\fixedtri(1)(2)(-2)
The control sequence at the end of the top line
of your error message was never \def'ed. If you have
misspelled it (e.g., `\hobx'), type `I' and the correct
spelling (e.g., `I\hbox'). Otherwise just continue,
and I'll forget about whatever was undefined.
! Undefined control sequence.
l.52 \deftriangle\fixedtri
(1)(2)(-2)
The control sequence at the end of the top line
of your error message was never \def'ed. If you have
misspelled it (e.g., `\hobx'), type `I' and the correct
spelling (e.g., `I\hbox'). Otherwise just continue,
and I'll forget about whatever was undefined.
Overfull \hbox (7.77861pt too wide) in paragraph at lines 32--53
[][]\OT1/cmr/m/n/10 (1) (15pt)(.5) (15pt)(-.5) (15pt)(1) (15pt)(-1)
(1)(-.3) (1
)(-1/2) (1)(-1) (1)(1/0)
[]
! Undefined control sequence.
l.58 \jftree
[xunit=54pt,yunit=22pt,triratio=.5]
The control sequence at the end of the top line
of your error message was never \def'ed. If you have
misspelled it (e.g., `\hobx'), type `I' and the correct
spelling (e.g., `I\hbox'). Otherwise just continue,
and I'll forget about whatever was undefined.
! Missing $ inserted.
<inserted text>
$
l.60 \!
\0{DegreeP}\medleft\1\medright\2\cr
I've inserted a begin-math/end-math symbol since I think
you left one out. Proceed, with fingers crossed.
LaTeX Font Info: External font `cmex10' loaded for size
(Font) <7> on input line 60.
LaTeX Font Info: External font `cmex10' loaded for size
(Font) <5> on input line 60.
! Undefined control sequence.
l.60 \!\0
{DegreeP}\medleft\1\medright\2\cr
The control sequence at the end of the top line
of your error message was never \def'ed. If you have
misspelled it (e.g., `\hobx'), type `I' and the correct
spelling (e.g., `I\hbox'). Otherwise just continue,
and I'll forget about whatever was undefined.
! Undefined control sequence.
l.60 \!\0{DegreeP}\medleft
\1\medright\2\cr
The control sequence at the end of the top line
of your error message was never \def'ed. If you have
misspelled it (e.g., `\hobx'), type `I' and the correct
spelling (e.g., `I\hbox'). Otherwise just continue,
and I'll forget about whatever was undefined.
! Undefined control sequence.
l.60 \!\0{DegreeP}\medleft\1
\medright\2\cr
The control sequence at the end of the top line
of your error message was never \def'ed. If you have
misspelled it (e.g., `\hobx'), type `I' and the correct
spelling (e.g., `I\hbox'). Otherwise just continue,
and I'll forget about whatever was undefined.
! Undefined control sequence.
l.60 \!\0{DegreeP}\medleft\1\medright
\2\cr
The control sequence at the end of the top line
of your error message was never \def'ed. If you have
misspelled it (e.g., `\hobx'), type `I' and the correct
spelling (e.g., `I\hbox'). Otherwise just continue,
and I'll forget about whatever was undefined.
! Undefined control sequence.
l.60 \!\0{DegreeP}\medleft\1\medright\2
\cr
The control sequence at the end of the top line
of your error message was never \def'ed. If you have
misspelled it (e.g., `\hobx'), type `I' and the correct
spelling (e.g., `I\hbox'). Otherwise just continue,
and I'll forget about whatever was undefined.
! Misplaced \cr.
l.60 \!\0{DegreeP}\medleft\1\medright\2\cr
I can't figure out why you would
want to use a tab mark
or \cr or \span just now. If something like a right brace
up above has ended a previous alignment prematurely,
you're probably due for more error messages, and you
might try typing `S' now just to see what is salvageable.
! Missing $ inserted.
<inserted text>
$
l.61
I've inserted a begin-math/end-math symbol since I think
you left one out. Proceed, with fingers crossed.
! Missing $ inserted.
<inserted text>
$
l.62 \!
\1{almost}\cr
I've inserted a begin-math/end-math symbol since I think
you left one out. Proceed, with fingers crossed.
! Undefined control sequence.
l.62 \!\1
{almost}\cr
The control sequence at the end of the top line
of your error message was never \def'ed. If you have
misspelled it (e.g., `\hobx'), type `I' and the correct
spelling (e.g., `I\hbox'). Otherwise just continue,
and I'll forget about whatever was undefined.
! Misplaced \cr.
l.62 \!\1{almost}\cr
I can't figure out why you would want to use a tab mark
or \cr or \span just now. If something like a right brace
up above has ended a previous alignment prematurely,
you're probably due for more error messages, and you
might try typing `S' now just to see what is salvageable.
! Missing $ inserted.
<inserted text>
$
l.63
I've inserted a begin-math/end-math symbol since I think
you left one out. Proceed, with fingers crossed.
! Missing $ inserted.
<inserted text>
$
l.64 \!
\2{$Degree^{'}$}\medleft\3\medright\4\cr
I've inserted a begin-math/end-math symbol since I think
you left one out. Proceed, with fingers crossed.
! Undefined control sequence.
l.64 \!\2
{$Degree^{'}$}\medleft\3\medright\4\cr
The control sequence at the end of the top line
of your error message was never \def'ed. If you have
misspelled it (e.g., `\hobx'), type `I' and the correct
spelling (e.g., `I\hbox'). Otherwise just continue,
and I'll forget about whatever was undefined.
! Missing } inserted.
<inserted text>
}
l.64 \!\2{$
Degree^{'}$}\medleft\3\medright\4\cr
I've inserted something that you may have forgotten.
(See the <inserted text> above.)
With luck, this will get me unwedged. But if you
really didn't forget anything, try typing `2' now; then
my insertion and my current dilemma will both disappear.
! Missing $ inserted.
<inserted text>
$
l.64 \!\2{$Degree^
{'}$}\medleft\3\medright\4\cr
I've inserted a begin-math/end-math symbol since I think
you left one out. Proceed, with fingers crossed.
! Extra }, or forgotten \endgroup.
l.64 \!\2{$Degree^{'}$}
\medleft\3\medright\4\cr
I've deleted a group-closing symbol because it seems to be
spurious, as in `$x}$'. But perhaps the } is legitimate and
you forgot something else, as in `\hbox{$x}'. In such cases
the way to recover is to insert both the forgotten and the
deleted material, e.g., by typing `I$}'.
! Undefined control sequence.
l.64 \!\2{$Degree^{'}$}\medleft
\3\medright\4\cr
The control sequence at the end of the top line
of your error message was never \def'ed. If you have
misspelled it (e.g., `\hobx'), type `I' and the correct
spelling (e.g., `I\hbox'). Otherwise just continue,
and I'll forget about whatever was undefined.
! Undefined control sequence.
l.64 \!\2{$Degree^{'}$}\medleft\3
\medright\4\cr
The control sequence at the end of the top line
of your error message was never \def'ed. If you have
misspelled it (e.g., `\hobx'), type `I' and the correct
spelling (e.g., `I\hbox'). Otherwise just continue,
and I'll forget about whatever was undefined.
! Undefined control sequence.
l.64 \!\2{$Degree^{'}$}\medleft\3\medright
\4\cr
The control sequence at the end of the top line
of your error message was never \def'ed. If you have
misspelled it (e.g., `\hobx'), type `I' and the correct
spelling (e.g., `I\hbox'). Otherwise just continue,
and I'll forget about whatever was undefined.
! Undefined control sequence.
l.64 \!\2{$Degree^{'}$}\medleft\3\medright\4
\cr
The control sequence at the end of the top line
of your error message was never \def'ed. If you have
misspelled it (e.g., `\hobx'), type `I' and the correct
spelling (e.g., `I\hbox'). Otherwise just continue,
and I'll forget about whatever was undefined.
! Misplaced \cr.
l.64 \!\2{$Degree^{'}$}\medleft\3\medright\4\cr
I can't figure out why you
would want to use a tab mark
or \cr or \span just now. If something like a right brace
up above has ended a previous alignment prematurely,
you're probably due for more error messages, and you
might try typing `S' now just to see what is salvageable.
! Missing $ inserted.
<inserted text>
$
l.66 \!
\3{Degree}\medvert\5\cr
I've inserted a begin-math/end-math symbol since I think
you left one out. Proceed, with fingers crossed.
! Undefined control sequence.
l.66 \!\3
{Degree}\medvert\5\cr
The control sequence at the end of the top line
of your error message was never \def'ed. If you have
misspelled it (e.g., `\hobx'), type `I' and the correct
spelling (e.g., `I\hbox'). Otherwise just continue,
and I'll forget about whatever was undefined.
! Undefined control sequence.
l.66 \!\3{Degree}\medvert
\5\cr
The control sequence at the end of the top line
of your error message was never \def'ed. If you have
misspelled it (e.g., `\hobx'), type `I' and the correct
spelling (e.g., `I\hbox'). Otherwise just continue,
and I'll forget about whatever was undefined.
! Undefined control sequence.
l.66 \!\3{Degree}\medvert\5
\cr
The control sequence at the end of the top line
of your error message was never \def'ed. If you have
misspelled it (e.g., `\hobx'), type `I' and the correct
spelling (e.g., `I\hbox'). Otherwise just continue,
and I'll forget about whatever was undefined.
! Misplaced \cr.
l.66 \!\3{Degree}\medvert\5\cr
I can't figure out why you would want to use
a tab mark
or \cr or \span just now. If something like a right brace
up above has ended a previous alignment prematurely,
you're probably due for more error messages, and you
might try typing `S' now just to see what is salvageable.
! Missing $ inserted.
<inserted text>
$
l.67
I've inserted a begin-math/end-math symbol since I think
you left one out. Proceed, with fingers crossed.
! Missing $ inserted.
<inserted text>
$
l.68 \!
\5{half}\cr
I've inserted a begin-math/end-math symbol since I think
you left one out. Proceed, with fingers crossed.
! Undefined control sequence.
l.68 \!\5
{half}\cr
The control sequence at the end of the top line
of your error message was never \def'ed. If you have
misspelled it (e.g., `\hobx'), type `I' and the correct
spelling (e.g., `I\hbox'). Otherwise just continue,
and I'll forget about whatever was undefined.
! Misplaced \cr.
l.68 \!\5{half}\cr
I can't figure out why you would want to use a tab mark
or \cr or \span just now. If something like a right brace
up above has ended a previous alignment prematurely,
you're probably due for more error messages, and you
might try typing `S' now just to see what is salvageable.
! Missing $ inserted.
<inserted text>
$
l.69
I've inserted a begin-math/end-math symbol since I think
you left one out. Proceed, with fingers crossed.
! Missing $ inserted.
<inserted text>
$
l.70 \!
\4{ADJP}\medvartri{full}\cr
I've inserted a begin-math/end-math symbol since I think
you left one out. Proceed, with fingers crossed.
! Undefined control sequence.
l.70 \!\4
{ADJP}\medvartri{full}\cr
The control sequence at the end of the top line
of your error message was never \def'ed. If you have
misspelled it (e.g., `\hobx'), type `I' and the correct
spelling (e.g., `I\hbox'). Otherwise just continue,
and I'll forget about whatever was undefined.
! Undefined control sequence.
l.70 \!\4{ADJP}\medvartri
{full}\cr
The control sequence at the end of the top line
of your error message was never \def'ed. If you have
misspelled it (e.g., `\hobx'), type `I' and the correct
spelling (e.g., `I\hbox'). Otherwise just continue,
and I'll forget about whatever was undefined.
! Misplaced \cr.
l.70 \!\4{ADJP}\medvartri{full}\cr
I can't figure out why you would want to
use a tab mark
or \cr or \span just now. If something like a right brace
up above has ended a previous alignment prematurely,
you're probably due for more error messages, and you
might try typing `S' now just to see what is salvageable.
! Missing $ inserted.
<inserted text>
$
l.71
I've inserted a begin-math/end-math symbol since I think
you left one out. Proceed, with fingers crossed.
! Undefined control sequence.
l.72 \endjftree
The control sequence at the end of the top line
of your error message was never \def'ed. If you have
misspelled it (e.g., `\hobx'), type `I' and the correct
spelling (e.g., `I\hbox'). Otherwise just continue,
and I'll forget about whatever was undefined.
Overfull \hbox (15.0pt too wide) in paragraph at lines 56--74
[][][]
[]
[1
] (bottle_pst-jftree.aux)
*File List*
article.cls 2004/02/16 v1.4f Standard LaTeX document class
size10.clo 2004/02/16 v1.4f Standard LaTeX file (size option)
pstricks.sty 2004/05/12 v0.2l LaTeX wrapper for `PSTricks' (RN,HV)
pstricks.tex 2005/05/06 v1.07 `PSTricks' (tvz)
xcolor.sty 2005/10/15 v2.06 LaTeX color extensions (UK)
color.cfg 2003/03/08 v1.0 MiKTeX 'color' configuration
dvips.def 1999/02/16 v3.0i Driver-dependant file (DPC,SPQR)
pst-jftree.sty 2004/01/10 package wrapper for PSTricks pst-jftree.tex
pst-xkey.tex 2005/02/22 v1.5 PSTricks specialization of xkeyval (HA)
xkeyval.sty 2005/08/12 v2.5d package option processing (HA)
xkeyval.tex 2005/08/12 v2.5d key=value parser (HA)
pst-labo.sty 2005/03/13 package wrapper for pst-labo.tex (hv)
pst-labo.tex 05/10/01 v2.02 `PST-labo' (ML,DG,CJ,hv)
pst-laboObj.tex
***********
)
Here is how much of TeX's memory you used:
2786 strings out of 95840
33006 string characters out of 1194657
130036 words of memory out of 1133207
5821 multiletter control sequences out of 60000
3640 words of font info for 14 fonts, out of 1000000 for 2000
40 hyphenation exceptions out of 4999
38i,5n,56p,208b,485s stack positions out of
5000i,500n,10000p,200000b,32768s
Output written on bottle_pst-jftree.dvi (1 page, 24556 bytes).
--
* DEPARTAMENTO DE
FILOLOGÍA HISPÁNICA Y CLÁSICA*
* **Web:** **www.uclm.es/profesorado/nmoreno/
<http://www.uclm.es/profesorado/nmoreno/>***
* Tel.: 902 204 100 ext. 5643*
* Fax: 925 72 10 11*
* **Norberto Moreno Quibén. *Profesor asociado
* *Norberto.Moreno at uclm.es <mailto:Norberto.Moreno at uclm.es> / Ext.5643
C.E.U. de Talavera de la Reina
Avda. Real Fábrica de Sedas s/n
45600 Talavera de la Reina (Toledo)
España (Spain)
-------------- next part --------------
A non-text attachment was scrubbed...
Name: bottle_pst-jftree.pdf
Type: application/pdf
Size: 8491 bytes
Desc: not available
Url : http://tug.org/pipermail/pstricks/attachments/20051021/43a6014b/attachment.pdf
More information about the PSTricks
mailing list