[OS X TeX] Using \usepgfplotslibrary{external}

Martin Bergren martin.berggren at cs.umu.se
Thu Aug 4 17:29:51 CEST 2016



> On 04 Aug 2016, at 17:23, Herbert Schulz <herbs at wideopenwest.com> wrote:
> 
>> On Aug 4, 2016, at 9:35 AM, Martin Bergren <martin.berggren at cs.umu.se> wrote:
>> 
>>> 
>>> On 04 Aug 2016, at 16:20, Herbert Schulz <herbs at wideopenwest.com> wrote:
>>> 
>>>> On Aug 4, 2016, at 9:09 AM, Martin Bergren <martin.berggren at cs.umu.se> wrote:
>>>> 
>>>>> 
>>>>> On 04 Aug 2016, at 15:57, Herbert Schulz <herbs at wideopenwest.com> wrote:
>>>>> 
>>>>>> On Aug 4, 2016, at 7:56 AM, Martin Bergren <martin.berggren at cs.umu.se> wrote:
>>>>>> 
>>>>>>> On 04 Aug 2016, at 14:52, Herbert Schulz <herbs at wideopenwest.com> wrote:
>>>>>>> 
>>>>>>>> On Aug 4, 2016, at 7:22 AM, Martin Bergren <martin.berggren at cs.umu.se> wrote:
>>>>>>>> 
>>>>>>>> I would like to be able to use
>>>>>>>> 
>>>>>>>> \usepgfplotslibrary{external}
>>>>>>>> 
>>>>>>>> for pgfplots, which apparently should be able to store the pgfplots or tikz figures as pdfs to shorten latexing time. The problem seem to be write18. 
>>>>>>>> Is there a way around it?
>>>>>>>> 
>>>>>>>> Cheers,
>>>>>>>> 
>>>>>>>> 
>>>>>>>> Martin Berggren
>>>>>>> 
>>>>>>> Howdy,
>>>>>>> 
>>>>>>> Assuming you are using TeXShop:
>>>>>>> 
>>>>>>> One thing you can use is the sepdflatexmk engine. This is set up to use latexmk so that all processing through bibtex/biber and makeindex is taken care of if necessary and the pdflatex has the --shell-escape flag set. To use it simply place the line
>>>>>>> 
>>>>>>> % !TEX TS-program = sepdflatexmk
>>>>>>> 
>>>>>>> at the top of your file and then typeset the document by simply using Typeset->Typeset (Cmd-T).
>>>>>>> 
>>>>>>> 
>>>>>> 
>>>>>> But this is not a bibtex/biber and makeindex issue. This is about pgfplots,  which I think is running (in my case) lualatex in the background to produce the plots.
>>>>>> 
>>>>>> Cheers,
>>>>>> 
>>>>>> Martin Berggren
>>>>> 
>>>>> Howdy,
>>>>> 
>>>>> If it's really using lualatex you need to somehow have it load the luatex85 package and the shellesc package under lualatex. I don't know if your initial file is run under lualatex but you might try to include
>>>>> 
>>>>> \ifx\directlua\@undefined
>>>>> \else
>>>>> \RequirePackage{luatex85}
>>>>> \RequirePackage{shellesc}
>>>>> \fi
>>>>> 
>>>>> before the \documentclass command. Otherwise you need to see how to have that included in the lualatex call.
>>>>> 
>>>>> I think tikz-fct uses gnuplot and, assuming you have gnuplot in your PATH, using the shell escape provided by the sepdflatexmk engine should do the job.
>>>> 
>>>> No, luatex is not the issue (same problem with pdftex), and I don’t think this is a gnuplot issue either. The error I get is the following:
>>>> 
>>>> Package tikz Error: Sorry, the system call 'lualatex -halt-on-error -interact
>>>> ion=batchmode -jobname "portoptreport1-figure0" "\def\tikzexternalrealjob{porto
>>>> ptreport1}\input{portoptreport1}"' did NOT result in a usable output file 'port
>>>> optreport1-figure0' (expected one of .pdf:.jpg:.jpeg:.png:). Please verify that
>>>> you have enabled system calls. For pdflatex, this is 'pdflatex -shell-escape'.
>>>> Sometimes it is also named 'write 18' or something like that. Or maybe the com
>>>> mand simply failed? Error messages can be found in 'portoptreport1-figure0.log'
>>>> . If you continue now, I'll try to typeset the picture. 
>>>> 
>>>> That’s why I in my first post said that it seems to be a write18 issue. To me it seems like lualatex (or pdflatex)  is supposed to run as a system command to produce the picture files. 
>>>> 
>>>> (The point with the  \usepgfplotslibrary{external} command is that tikz and pgfplot should not need to interpret the figures each time but instead produce a pdf-file, save it to a subdirectory, and use that in order to speed up the process).
>>>> 
>>>> Cheers,
>>>> 
>>>> Martin Berggren
>>> 
>>> Howdy,
>>> 
>>> Pretty confusing message. It says it can't get output from a lulatex command (which doesn't contain --shell-escape --- and even then it would need to include those packages since luatex in TL2016 does system calls through a different mechanism, hence the addition of the luatex85 and shellesc packages) and then talks about pdflatex --shell-escape. The sepdflatex engine in TeXShop does call pdflatex with --shell-escape but has no control over any internal call to lualatex.
>>> 
>>> I'd suggest putting the question on Stack Exchange, <http://tex.stackexchange.com>, which is monitored by many experienced folks.
>> 
>> 
>> As I understand it, it is only a few system commands that are allowed through \write18{}, namely those explicitly listed in /usr/local/texlive/2016/texmf-dist/web2c/texmf.cnf, which is 
>> 
>> shell_escape_commands = \
>> bibtex,bibtex8,\
>> extractbb,\
>> gregorio,\
>> kpsewhich,\
>> makeindex,\
>> mpost,\
>> repstopdf,\
>> 
>> I tried to set shell_escape = a in my local texmf.cnf file, but that does not work either. It is regarded a security issue, it seems. 
>> 
>> Cheers,  
>> 
>> Martin Berggren
> 
> Howdy,
> 
> Not quite... The restricted shell escape list allows pdftex to execute the programs on that list even without --shell-escape being set. If you do set --shell-escape it allows pdftex to execute anything you ask for and is therefore not secure.
> 
> Part of the problem is that luatex in TL2016 no longer uses \write18 to execute external commands even if allowed to using --shell-escape. That is why requiring the luatex85 and shellesc packages in lualatex is necessary to simulate the use of \write18.


I tried various version; with -shell-escape option, using luatex85, setting  shell_escape = a in my local texmf.cnf file. Nothing helped. I did not try shellesc package, though. Didn’t know about that.

Cheers,

Martin Berggren
-------------------------------------------------------------------
Department of Computing Science, Umeå Universitet
Campustorget 5, S-901 87 Umeå, Sweden. Ph: +46-70-732 8111
http://www.cs.umu.se/~martinb <http://www.cs.umu.se/~martinb>, Martin.Berggren at cs.umu.se <mailto:Martin.Berggren at cs.umu.se>

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://tug.org/pipermail/macostex-archives/attachments/20160804/8e756fdd/attachment-0001.html>
-------------- next part --------------
----------- Please Consult the Following Before Posting -----------
TeX FAQ: http://www.tex.ac.uk/faq
List Reminders and Etiquette: https://www.esm.psu.edu/~gray/tex/
List Archives: http://dir.gmane.org/gmane.comp.tex.macosx
                https://email.esm.psu.edu/pipermail/macosx-tex/
TeX on Mac OS X Website: http://mactex-wiki.tug.org/
List Info: https://email.esm.psu.edu/mailman/listinfo/macosx-tex


More information about the macostex-archives mailing list